| /* |
| * Copyright (c) 2019, The OpenThread Authors. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the copyright holder nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "aes_alt.h" |
| #include "mbedtls/aes.h" |
| |
| #ifdef MBEDTLS_AES_ALT |
| |
| #include "sal.h" |
| |
| #include <common/code_utils.hpp> |
| #include <string.h> |
| |
| void mbedtls_aes_init(mbedtls_aes_context *ctx) |
| { |
| (void)ctx; |
| } |
| |
| void mbedtls_aes_free(mbedtls_aes_context *ctx) |
| { |
| (void)ctx; |
| } |
| |
| int mbedtls_aes_setkey_enc(mbedtls_aes_context *ctx, const unsigned char *key, unsigned int keybits) |
| { |
| int retval = 0; |
| |
| switch (keybits) |
| { |
| case 128: |
| sal_aes_setup((uint8_t *)key, AES_MODE_ECB, AES_DIR_ENCRYPT); |
| break; |
| |
| default: |
| retval = MBEDTLS_ERR_AES_INVALID_KEY_LENGTH; |
| break; |
| } |
| |
| return retval; |
| } |
| |
| int mbedtls_aes_setkey_dec(mbedtls_aes_context *ctx, const unsigned char *key, unsigned int keybits) |
| { |
| int retval = 0; |
| |
| switch (keybits) |
| { |
| case 128: |
| sal_aes_setup((uint8_t *)key, AES_MODE_ECB, AES_DIR_DECRYPT); |
| break; |
| |
| default: |
| retval = MBEDTLS_ERR_AES_INVALID_KEY_LENGTH; |
| break; |
| } |
| |
| return retval; |
| } |
| |
| /** |
| * \brief AES-ECB block encryption/decryption |
| * |
| * \param ctx AES context |
| * \param mode MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT |
| * \param input 16-byte input block |
| * \param output 16-byte output block |
| * |
| * \return 0 if successful |
| */ |
| int mbedtls_aes_crypt_ecb(mbedtls_aes_context *ctx, int mode, const unsigned char input[16], unsigned char output[16]) |
| { |
| int retval = 0; |
| |
| sal_aes_wrrd((uint8_t *)input, NULL); |
| sal_aes_read((uint8_t *)output); |
| |
| return retval; |
| } |
| |
| int mbedtls_aes_self_test(int verbose) |
| { |
| (void)verbose; |
| |
| /* 128-bit Key 2b7e151628aed2a6abf7158809cf4f3c */ |
| const uint8_t key_128b[16] = {0x2b, 0x7e, 0x15, 0x16, 0x28, 0xae, 0xd2, 0xa6, |
| 0xab, 0xf7, 0x15, 0x88, 0x09, 0xcf, 0x4f, 0x3c}; |
| mbedtls_aes_context aes; |
| int retval = 0; |
| |
| uint8_t input[16] = {0}; |
| uint8_t output[16] = {0}; |
| uint8_t decrypt[16] = {0}; |
| |
| strcpy((char *)input, (const char *)"hw_aes_test"); |
| |
| mbedtls_aes_init(&aes); |
| |
| retval = mbedtls_aes_setkey_enc(&aes, (const unsigned char *)key_128b, 128); |
| VerifyOrExit(retval != 0, retval = -1); |
| |
| retval = mbedtls_aes_setkey_dec(&aes, (const unsigned char *)key_128b, 128); |
| VerifyOrExit(retval != 0, retval = -1); |
| |
| retval = mbedtls_aes_crypt_ecb(&aes, MBEDTLS_AES_ENCRYPT, input, output); |
| VerifyOrExit(retval != 0, retval = -1); |
| |
| retval = mbedtls_aes_crypt_ecb(&aes, MBEDTLS_AES_DECRYPT, output, decrypt); |
| VerifyOrExit(retval != 0, retval = -1); |
| |
| mbedtls_aes_free(&aes); |
| |
| exit: |
| |
| return retval; |
| } |
| |
| #endif /* MBEDTLS_AES_ALT */ |