examples/platforms/nrf528xx/nrf52833/platform-config.h - third_party/openthread - Git at Google

 /*
  *  Copyright (c) 2019, The OpenThread Authors.
  *  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions are met:
  *  1. Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *  2. Redistributions in binary form must reproduce the above copyright
  *     notice, this list of conditions and the following disclaimer in the
  *     documentation and/or other materials provided with the distribution.
  *  3. Neither the name of the copyright holder nor the
  *     names of its contributors may be used to endorse or promote products
  *     derived from this software without specific prior written permission.
  *
  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  *  POSSIBILITY OF SUCH DAMAGE.
  */

 /**
  * @file
  *   This file includes the platform-specific configuration.
  *
  */

 #ifndef PLATFORM_CONFIG_H_
 #define PLATFORM_CONFIG_H_

 #include "nrf.h"
 #include "nrf_peripherals.h"
 #include "drivers/clock/nrf_drv_clock.h"
 #include "hal/nrf_radio.h"
 #include "hal/nrf_uart.h"

 #include "openthread-core-config.h"
 #include <openthread/config.h>

 /*******************************************************************************
  * @section UART Driver Configuration.
  ******************************************************************************/

 /**
  * @def UART_INSTANCE
  *
  * UART Instance.
  *
  */
 #ifndef UART_INSTANCE
 #define UART_INSTANCE NRF_UART0
 #endif

 /**
  * @def UART_PARITY
  *
  * UART Parity configuration.
  *
  * @brief Possible values:
  *         \ref NRF_UART_PARITY_EXCLUDED - Parity bit is not present.
  *         \ref NRF_UART_PARITY_INCLUDED - Parity bit is present.
  *
  */
 #ifndef UART_PARITY
 #define UART_PARITY NRF_UART_PARITY_EXCLUDED
 #endif

 /**
  * @def UART_HWFC_ENABLED
  *
  * Enable UART Hardware Flow Control.
  *
  */
 #ifndef UART_HWFC_ENABLED
 #define UART_HWFC_ENABLED 1
 #endif

 /**
  * @def UART_BAUDRATE
  *
  * UART Baudrate.
  *
  * @brief Possible values:
  *         \ref NRF_UART_BAUDRATE_1200 - 1200 baud.
  *         \ref NRF_UART_BAUDRATE_2400 - 2400 baud.
  *         \ref NRF_UART_BAUDRATE_4800 - 4800 baud.
  *         \ref NRF_UART_BAUDRATE_9600 - 9600 baud.
  *         \ref NRF_UART_BAUDRATE_14400 - 14400 baud.
  *         \ref NRF_UART_BAUDRATE_19200 - 19200 baud.
  *         \ref NRF_UART_BAUDRATE_28800 - 28800 baud.
  *         \ref NRF_UART_BAUDRATE_38400 - 38400 baud.
  *         \ref NRF_UART_BAUDRATE_57600 - 57600 baud.
  *         \ref NRF_UART_BAUDRATE_76800 - 76800 baud.
  *         \ref NRF_UART_BAUDRATE_115200 - 115200 baud.
  *         \ref NRF_UART_BAUDRATE_230400 - 230400 baud.
  *         \ref NRF_UART_BAUDRATE_250000 - 250000 baud.
  *         \ref NRF_UART_BAUDRATE_460800 - 460800 baud.
  *         \ref NRF_UART_BAUDRATE_921600 - 921600 baud.
  *         \ref NRF_UART_BAUDRATE_1000000 - 1000000 baud.
  *
  */
 #ifndef UART_BAUDRATE
 #define UART_BAUDRATE NRF_UART_BAUDRATE_115200
 #endif

 /**
  *  @def UART_IRQN
  *
  * UART Interrupt number.
  *
  */
 #ifndef UART_IRQN
 #define UART_IRQN UARTE0_UART0_IRQn
 #endif

 /**
  * @def UART_IRQ_PRIORITY
  *
  * UART Interrupt priority.
  *
  */
 #ifndef UART_IRQ_PRIORITY
 #define UART_IRQ_PRIORITY 6
 #endif

 /**
  * @def UART_RX_BUFFER_SIZE
  *
  * UART Receive buffer size.
  *
  */
 #ifndef UART_RX_BUFFER_SIZE
 #define UART_RX_BUFFER_SIZE 512
 #endif

 /**
  * @def UART_PIN_TX
  *
  * UART TX Pin.
  *
  */
 #ifndef UART_PIN_TX
 #define UART_PIN_TX 6
 #endif

 /**
  * @def UART_PIN_RX
  *
  * UART RX Pin.
  *
  */
 #ifndef UART_PIN_RX
 #define UART_PIN_RX 8
 #endif

 /**
  * @def UART_PIN_CTS
  *
  * UART CTS Pin.
  *
  */
 #ifndef UART_PIN_CTS
 #define UART_PIN_CTS 7
 #endif

 /**
  * @def UART_PIN_RTS
  *
  * UART RTS Pin.
  *
  */
 #ifndef UART_PIN_RTS
 #define UART_PIN_RTS 5
 #endif

 /*******************************************************************************
  * @section Alarm Driver Configuration.
  ******************************************************************************/

 /**
  * @def RTC_INSTANCE
  *
  * RTC Instance.
  *
  */
 #ifndef RTC_INSTANCE
 #define RTC_INSTANCE NRF_RTC2
 #endif

 /**
  * @def RTC_IRQ_HANDLER
  *
  * RTC interrupt handler name
  *
  */
 #ifndef RTC_IRQ_HANDLER
 #define RTC_IRQ_HANDLER RTC2_IRQHandler
 #endif

 /**
  * @def RTC_IRQN
  *
  * RTC Interrupt number.
  *
  */
 #ifndef RTC_IRQN
 #define RTC_IRQN RTC2_IRQn
 #endif

 /**
  * @def RTC_IRQ_PRIORITY
  *
  * RTC Interrupt priority.
  *
  */
 #ifndef RTC_IRQ_PRIORITY
 #define RTC_IRQ_PRIORITY 6
 #endif

 /*******************************************************************************
  * @section Random Number Generator Driver Configuration.
  ******************************************************************************/

 /**
  * @def RNG_BUFFER_SIZE
  *
  * True Random Number Generator buffer size.
  *
  */
 #ifndef RNG_BUFFER_SIZE
 #define RNG_BUFFER_SIZE 128
 #endif

 /**
  * @def RNG_IRQ_PRIORITY
  *
  * RNG Interrupt priority.
  *
  */
 #ifndef RNG_IRQ_PRIORITY
 #define RNG_IRQ_PRIORITY 6
 #endif

 /*******************************************************************************
  * @section SPI Slave configuration.
  ******************************************************************************/

 /**
  * @def SPIS Instance.
  */
 #ifndef SPIS_INSTANCE
 #define SPIS_INSTANCE 0
 #endif

 /**
  * @def SPIS mode.
  *
  * @brief Possible values:
  *         \ref NRF_SPIS_MODE_0 - SCK active high, sample on leading edge of clock.
  *         \ref NRF_SPIS_MODE_1 - SCK active high, sample on trailing edge of clock.
  *         \ref NRF_SPIS_MODE_2 - SCK active low, sample on leading edge of clock.
  *         \ref NRF_SPIS_MODE_3 - SCK active low, sample on trailing edge of clock.
  */
 #ifndef SPIS_MODE
 #define SPIS_MODE NRF_SPIS_MODE_0
 #endif

 /**
  * @def SPIS bit orders.
  *
  * @brief Possible values:
  *         \ref NRF_SPIS_BIT_ORDER_MSB_FIRST - Most significant bit shifted out first.
  *         \ref NRF_SPIS_BIT_ORDER_LSB_FIRST - Least significant bit shifted out first.
  */
 #ifndef SPIS_BIT_ORDER
 #define SPIS_BIT_ORDER NRF_SPIS_BIT_ORDER_MSB_FIRST
 #endif

 /**
  * @def SPIS Interrupt priority.
  */
 #ifndef SPIS_IRQ_PRIORITY
 #define SPIS_IRQ_PRIORITY 6
 #endif

 /**
  * @def SPIS MOSI Pin.
  */
 #ifndef SPIS_PIN_MOSI
 #define SPIS_PIN_MOSI 4
 #endif

 /**
  * @def SPIS MISO Pin.
  */
 #ifndef SPIS_PIN_MISO
 #define SPIS_PIN_MISO 28
 #endif

 /**
  * @def SPIS SCK Pin.
  */
 #ifndef SPIS_PIN_SCK
 #define SPIS_PIN_SCK 3
 #endif

 /**
  * @def SPIS CSN Pin.
  */
 #ifndef SPIS_PIN_CSN
 #define SPIS_PIN_CSN 29
 #endif

 /**
  * @def SPIS Host IRQ Pin.
  */
 #ifndef SPIS_PIN_HOST_IRQ
 #define SPIS_PIN_HOST_IRQ 30
 #endif

 /*******************************************************************************
  * @section USB driver configuration.
  ******************************************************************************/

 /**
  * @def USB_HOST_UART_CONFIG_DELAY_MS
  *
  * Delay after DTR gets asserted that we start send any queued data. This allows slow
  * Linux-based hosts to have enough time to configure their port for raw mode.
  *
  */
 #ifndef USB_HOST_UART_CONFIG_DELAY_MS
 #define USB_HOST_UART_CONFIG_DELAY_MS 10
 #endif

 /**
  * @def USB_CDC_AS_SERIAL_TRANSPORT
  *
  * Use USB CDC driver for serial communication.
  */
 #ifndef USB_CDC_AS_SERIAL_TRANSPORT
 #define USB_CDC_AS_SERIAL_TRANSPORT 0
 #endif

 /**
  * @def The USB interface to use for CDC ACM COMM.
  *
  * According to the USB Specification, interface numbers cannot have gaps. Tailor this value to adhere to this
  * limitation. Takes values between 0-255.
  */
 #ifndef USB_CDC_ACM_COMM_INTERFACE
 #define USB_CDC_ACM_COMM_INTERFACE 1
 #endif

 /**
  * @def The USB interface to use for CDC ACM DATA.
  *
  * According to the USB Specification, interface numbers cannot have gaps. Tailor this value to adhere to this
  * limitation. Takes values between 0-255.
  */
 #ifndef USB_CDC_ACM_DATA_INTERFACE
 #define USB_CDC_ACM_DATA_INTERFACE 2
 #endif

 /**
  * @def OPENTHREAD_PLATFORM_USE_PSEUDO_RESET
  *
  * Reset the application, not the chip, when a software reset is requested.
  * via `otPlatReset()`.
  */
 #ifndef OPENTHREAD_PLATFORM_USE_PSEUDO_RESET
 #define OPENTHREAD_PLATFORM_USE_PSEUDO_RESET USB_CDC_AS_SERIAL_TRANSPORT
 #endif

 /*******************************************************************************
  * @section Platform FEM Configuration
  ******************************************************************************/

 /**
  * @def PLATFORM_FEM_ENABLE_DEFAULT_CONFIG
  *
  * Enable default front end module configuration.
  *
  */
 #ifndef PLATFORM_FEM_ENABLE_DEFAULT_CONFIG
 #define PLATFORM_FEM_ENABLE_DEFAULT_CONFIG 0
 #endif

 /*******************************************************************************
  * @section Radio driver configuration.
  ******************************************************************************/

 /**
  * @def NRF_802154_PENDING_SHORT_ADDRESSES
  *
  * Number of slots containing short addresses of nodes for which pending data is stored.
  *
  */
 #ifndef NRF_802154_PENDING_SHORT_ADDRESSES
 #define NRF_802154_PENDING_SHORT_ADDRESSES OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
 #endif

 /**
  * @def NRF_802154_PENDING_EXTENDED_ADDRESSES
  *
  * Number of slots containing extended addresses of nodes for which pending data is stored.
  *
  */
 #ifndef NRF_802154_PENDING_EXTENDED_ADDRESSES
 #define NRF_802154_PENDING_EXTENDED_ADDRESSES OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
 #endif

 /**
  * @def NRF_802154_CSMA_CA_ENABLED
  *
  * If CSMA-CA procedure should be enabled by the driver. Disabling CSMA-CA procedure improves
  * driver performance.
  *
  */
 #ifndef NRF_802154_CSMA_CA_ENABLED
 #define NRF_802154_CSMA_CA_ENABLED 1
 #endif

 /**
  * @def NRF_802154_ACK_TIMEOUT_ENABLED
  *
  * If ACK timeout feature should be enabled in the driver.
  *
  */
 #ifndef NRF_802154_ACK_TIMEOUT_ENABLED
 #define NRF_802154_ACK_TIMEOUT_ENABLED 1
 #endif

 /*******************************************************************************
  * @section Temperature sensor driver configuration.
  ******************************************************************************/

 /**
  * @def TEMP_MEASUREMENT_INTERVAL
  *
  * Interval of consecutive temperature measurements [s].
  *
  */
 #ifndef TEMP_MEASUREMENT_INTERVAL
 #define TEMP_MEASUREMENT_INTERVAL 30
 #endif

 /**
  * @def NRF_802154_TX_STARTED_NOTIFY_ENABLED
  *
  * If notification of started transmission should be enabled in the driver.
  *
  * @note This feature must be enabled to support Header IE related features.
  *
  */
 #ifndef NRF_802154_TX_STARTED_NOTIFY_ENABLED
 #define NRF_802154_TX_STARTED_NOTIFY_ENABLED 1
 #endif

 #endif // PLATFORM_CONFIG_H_
	/*
	* Copyright (c) 2019, The OpenThread Authors.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. Neither the name of the copyright holder nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	/**
	* @file
	* This file includes the platform-specific configuration.
	*
	*/

	#ifndef PLATFORM_CONFIG_H_
	#define PLATFORM_CONFIG_H_

	#include "nrf.h"
	#include "nrf_peripherals.h"
	#include "drivers/clock/nrf_drv_clock.h"
	#include "hal/nrf_radio.h"
	#include "hal/nrf_uart.h"

	#include "openthread-core-config.h"
	#include <openthread/config.h>

	/*******************************************************************************
	* @section UART Driver Configuration.
	******************************************************************************/

	/**
	* @def UART_INSTANCE
	*
	* UART Instance.
	*
	*/
	#ifndef UART_INSTANCE
	#define UART_INSTANCE NRF_UART0
	#endif

	/**
	* @def UART_PARITY
	*
	* UART Parity configuration.
	*
	* @brief Possible values:
	* \ref NRF_UART_PARITY_EXCLUDED - Parity bit is not present.
	* \ref NRF_UART_PARITY_INCLUDED - Parity bit is present.
	*
	*/
	#ifndef UART_PARITY
	#define UART_PARITY NRF_UART_PARITY_EXCLUDED
	#endif

	/**
	* @def UART_HWFC_ENABLED
	*
	* Enable UART Hardware Flow Control.
	*
	*/
	#ifndef UART_HWFC_ENABLED
	#define UART_HWFC_ENABLED 1
	#endif

	/**
	* @def UART_BAUDRATE
	*
	* UART Baudrate.
	*
	* @brief Possible values:
	* \ref NRF_UART_BAUDRATE_1200 - 1200 baud.
	* \ref NRF_UART_BAUDRATE_2400 - 2400 baud.
	* \ref NRF_UART_BAUDRATE_4800 - 4800 baud.
	* \ref NRF_UART_BAUDRATE_9600 - 9600 baud.
	* \ref NRF_UART_BAUDRATE_14400 - 14400 baud.
	* \ref NRF_UART_BAUDRATE_19200 - 19200 baud.
	* \ref NRF_UART_BAUDRATE_28800 - 28800 baud.
	* \ref NRF_UART_BAUDRATE_38400 - 38400 baud.
	* \ref NRF_UART_BAUDRATE_57600 - 57600 baud.
	* \ref NRF_UART_BAUDRATE_76800 - 76800 baud.
	* \ref NRF_UART_BAUDRATE_115200 - 115200 baud.
	* \ref NRF_UART_BAUDRATE_230400 - 230400 baud.
	* \ref NRF_UART_BAUDRATE_250000 - 250000 baud.
	* \ref NRF_UART_BAUDRATE_460800 - 460800 baud.
	* \ref NRF_UART_BAUDRATE_921600 - 921600 baud.
	* \ref NRF_UART_BAUDRATE_1000000 - 1000000 baud.
	*
	*/
	#ifndef UART_BAUDRATE
	#define UART_BAUDRATE NRF_UART_BAUDRATE_115200
	#endif

	/**
	* @def UART_IRQN
	*
	* UART Interrupt number.
	*
	*/
	#ifndef UART_IRQN
	#define UART_IRQN UARTE0_UART0_IRQn
	#endif

	/**
	* @def UART_IRQ_PRIORITY
	*
	* UART Interrupt priority.
	*
	*/
	#ifndef UART_IRQ_PRIORITY
	#define UART_IRQ_PRIORITY 6
	#endif

	/**
	* @def UART_RX_BUFFER_SIZE
	*
	* UART Receive buffer size.
	*
	*/
	#ifndef UART_RX_BUFFER_SIZE
	#define UART_RX_BUFFER_SIZE 512
	#endif

	/**
	* @def UART_PIN_TX
	*
	* UART TX Pin.
	*
	*/
	#ifndef UART_PIN_TX
	#define UART_PIN_TX 6
	#endif

	/**
	* @def UART_PIN_RX
	*
	* UART RX Pin.
	*
	*/
	#ifndef UART_PIN_RX
	#define UART_PIN_RX 8
	#endif

	/**
	* @def UART_PIN_CTS
	*
	* UART CTS Pin.
	*
	*/
	#ifndef UART_PIN_CTS
	#define UART_PIN_CTS 7
	#endif

	/**
	* @def UART_PIN_RTS
	*
	* UART RTS Pin.
	*
	*/
	#ifndef UART_PIN_RTS
	#define UART_PIN_RTS 5
	#endif

	/*******************************************************************************
	* @section Alarm Driver Configuration.
	******************************************************************************/

	/**
	* @def RTC_INSTANCE
	*
	* RTC Instance.
	*
	*/
	#ifndef RTC_INSTANCE
	#define RTC_INSTANCE NRF_RTC2
	#endif

	/**
	* @def RTC_IRQ_HANDLER
	*
	* RTC interrupt handler name
	*
	*/
	#ifndef RTC_IRQ_HANDLER
	#define RTC_IRQ_HANDLER RTC2_IRQHandler
	#endif

	/**
	* @def RTC_IRQN
	*
	* RTC Interrupt number.
	*
	*/
	#ifndef RTC_IRQN
	#define RTC_IRQN RTC2_IRQn
	#endif

	/**
	* @def RTC_IRQ_PRIORITY
	*
	* RTC Interrupt priority.
	*
	*/
	#ifndef RTC_IRQ_PRIORITY
	#define RTC_IRQ_PRIORITY 6
	#endif

	/*******************************************************************************
	* @section Random Number Generator Driver Configuration.
	******************************************************************************/

	/**
	* @def RNG_BUFFER_SIZE
	*
	* True Random Number Generator buffer size.
	*
	*/
	#ifndef RNG_BUFFER_SIZE
	#define RNG_BUFFER_SIZE 128
	#endif

	/**
	* @def RNG_IRQ_PRIORITY
	*
	* RNG Interrupt priority.
	*
	*/
	#ifndef RNG_IRQ_PRIORITY
	#define RNG_IRQ_PRIORITY 6
	#endif

	/*******************************************************************************
	* @section SPI Slave configuration.
	******************************************************************************/

	/**
	* @def SPIS Instance.
	*/
	#ifndef SPIS_INSTANCE
	#define SPIS_INSTANCE 0
	#endif

	/**
	* @def SPIS mode.
	*
	* @brief Possible values:
	* \ref NRF_SPIS_MODE_0 - SCK active high, sample on leading edge of clock.
	* \ref NRF_SPIS_MODE_1 - SCK active high, sample on trailing edge of clock.
	* \ref NRF_SPIS_MODE_2 - SCK active low, sample on leading edge of clock.
	* \ref NRF_SPIS_MODE_3 - SCK active low, sample on trailing edge of clock.
	*/
	#ifndef SPIS_MODE
	#define SPIS_MODE NRF_SPIS_MODE_0
	#endif

	/**
	* @def SPIS bit orders.
	*
	* @brief Possible values:
	* \ref NRF_SPIS_BIT_ORDER_MSB_FIRST - Most significant bit shifted out first.
	* \ref NRF_SPIS_BIT_ORDER_LSB_FIRST - Least significant bit shifted out first.
	*/
	#ifndef SPIS_BIT_ORDER
	#define SPIS_BIT_ORDER NRF_SPIS_BIT_ORDER_MSB_FIRST
	#endif

	/**
	* @def SPIS Interrupt priority.
	*/
	#ifndef SPIS_IRQ_PRIORITY
	#define SPIS_IRQ_PRIORITY 6
	#endif

	/**
	* @def SPIS MOSI Pin.
	*/
	#ifndef SPIS_PIN_MOSI
	#define SPIS_PIN_MOSI 4
	#endif

	/**
	* @def SPIS MISO Pin.
	*/
	#ifndef SPIS_PIN_MISO
	#define SPIS_PIN_MISO 28
	#endif

	/**
	* @def SPIS SCK Pin.
	*/
	#ifndef SPIS_PIN_SCK
	#define SPIS_PIN_SCK 3
	#endif

	/**
	* @def SPIS CSN Pin.
	*/
	#ifndef SPIS_PIN_CSN
	#define SPIS_PIN_CSN 29
	#endif

	/**
	* @def SPIS Host IRQ Pin.
	*/
	#ifndef SPIS_PIN_HOST_IRQ
	#define SPIS_PIN_HOST_IRQ 30
	#endif

	/*******************************************************************************
	* @section USB driver configuration.
	******************************************************************************/

	/**
	* @def USB_HOST_UART_CONFIG_DELAY_MS
	*
	* Delay after DTR gets asserted that we start send any queued data. This allows slow
	* Linux-based hosts to have enough time to configure their port for raw mode.
	*
	*/
	#ifndef USB_HOST_UART_CONFIG_DELAY_MS
	#define USB_HOST_UART_CONFIG_DELAY_MS 10
	#endif

	/**
	* @def USB_CDC_AS_SERIAL_TRANSPORT
	*
	* Use USB CDC driver for serial communication.
	*/
	#ifndef USB_CDC_AS_SERIAL_TRANSPORT
	#define USB_CDC_AS_SERIAL_TRANSPORT 0
	#endif

	/**
	* @def The USB interface to use for CDC ACM COMM.
	*
	* According to the USB Specification, interface numbers cannot have gaps. Tailor this value to adhere to this
	* limitation. Takes values between 0-255.
	*/
	#ifndef USB_CDC_ACM_COMM_INTERFACE
	#define USB_CDC_ACM_COMM_INTERFACE 1
	#endif

	/**
	* @def The USB interface to use for CDC ACM DATA.
	*
	* According to the USB Specification, interface numbers cannot have gaps. Tailor this value to adhere to this
	* limitation. Takes values between 0-255.
	*/
	#ifndef USB_CDC_ACM_DATA_INTERFACE
	#define USB_CDC_ACM_DATA_INTERFACE 2
	#endif

	/**
	* @def OPENTHREAD_PLATFORM_USE_PSEUDO_RESET
	*
	* Reset the application, not the chip, when a software reset is requested.
	* via `otPlatReset()`.
	*/
	#ifndef OPENTHREAD_PLATFORM_USE_PSEUDO_RESET
	#define OPENTHREAD_PLATFORM_USE_PSEUDO_RESET USB_CDC_AS_SERIAL_TRANSPORT
	#endif

	/*******************************************************************************
	* @section Platform FEM Configuration
	******************************************************************************/

	/**
	* @def PLATFORM_FEM_ENABLE_DEFAULT_CONFIG
	*
	* Enable default front end module configuration.
	*
	*/
	#ifndef PLATFORM_FEM_ENABLE_DEFAULT_CONFIG
	#define PLATFORM_FEM_ENABLE_DEFAULT_CONFIG 0
	#endif

	/*******************************************************************************
	* @section Radio driver configuration.
	******************************************************************************/

	/**
	* @def NRF_802154_PENDING_SHORT_ADDRESSES
	*
	* Number of slots containing short addresses of nodes for which pending data is stored.
	*
	*/
	#ifndef NRF_802154_PENDING_SHORT_ADDRESSES
	#define NRF_802154_PENDING_SHORT_ADDRESSES OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
	#endif

	/**
	* @def NRF_802154_PENDING_EXTENDED_ADDRESSES
	*
	* Number of slots containing extended addresses of nodes for which pending data is stored.
	*
	*/
	#ifndef NRF_802154_PENDING_EXTENDED_ADDRESSES
	#define NRF_802154_PENDING_EXTENDED_ADDRESSES OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
	#endif

	/**
	* @def NRF_802154_CSMA_CA_ENABLED
	*
	* If CSMA-CA procedure should be enabled by the driver. Disabling CSMA-CA procedure improves
	* driver performance.
	*
	*/
	#ifndef NRF_802154_CSMA_CA_ENABLED
	#define NRF_802154_CSMA_CA_ENABLED 1
	#endif

	/**
	* @def NRF_802154_ACK_TIMEOUT_ENABLED
	*
	* If ACK timeout feature should be enabled in the driver.
	*
	*/
	#ifndef NRF_802154_ACK_TIMEOUT_ENABLED
	#define NRF_802154_ACK_TIMEOUT_ENABLED 1
	#endif

	/*******************************************************************************
	* @section Temperature sensor driver configuration.
	******************************************************************************/

	/**
	* @def TEMP_MEASUREMENT_INTERVAL
	*
	* Interval of consecutive temperature measurements [s].
	*
	*/
	#ifndef TEMP_MEASUREMENT_INTERVAL
	#define TEMP_MEASUREMENT_INTERVAL 30
	#endif

	/**
	* @def NRF_802154_TX_STARTED_NOTIFY_ENABLED
	*
	* If notification of started transmission should be enabled in the driver.
	*
	* @note This feature must be enabled to support Header IE related features.
	*
	*/
	#ifndef NRF_802154_TX_STARTED_NOTIFY_ENABLED
	#define NRF_802154_TX_STARTED_NOTIFY_ENABLED 1
	#endif

	#endif // PLATFORM_CONFIG_H_