| /* |
| * Copyright (c) 2016-2023, The OpenThread Authors. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the copyright holder nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * This file includes compile-time configurations for Mesh Forwarder. |
| */ |
| |
| #ifndef CONFIG_MESH_FORWARDER_H_ |
| #define CONFIG_MESH_FORWARDER_H_ |
| |
| #include "config/border_router.h" |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DROP_MESSAGE_ON_FRAGMENT_TX_FAILURE |
| * |
| * Define as 1 for OpenThread to drop a message (and not send any remaining fragments of the message) if all transmit |
| * attempts fail for a fragment of the message. For a direct transmission, a failure occurs after all MAC transmission |
| * attempts for a given fragment are unsuccessful. For an indirect transmission, a failure occurs after all data poll |
| * triggered transmission attempts for a given fragment fail. |
| * |
| * If set to zero (disabled), OpenThread will attempt to send subsequent fragments, whether or not all transmission |
| * attempts fail for a given fragment. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DROP_MESSAGE_ON_FRAGMENT_TX_FAILURE |
| #define OPENTHREAD_CONFIG_DROP_MESSAGE_ON_FRAGMENT_TX_FAILURE 1 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_6LOWPAN_REASSEMBLY_TIMEOUT |
| * |
| * The reassembly timeout between 6LoWPAN fragments in seconds. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_6LOWPAN_REASSEMBLY_TIMEOUT |
| #define OPENTHREAD_CONFIG_6LOWPAN_REASSEMBLY_TIMEOUT 2 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_NUM_FRAGMENT_PRIORITY_ENTRIES |
| * |
| * The number of fragment priority entries. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_NUM_FRAGMENT_PRIORITY_ENTRIES |
| #define OPENTHREAD_CONFIG_NUM_FRAGMENT_PRIORITY_ENTRIES 8 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_ENABLE |
| * |
| * Define to 1 to enable delay-aware queue management for the send queue. |
| * |
| * When enabled device will monitor time-in-queue of messages in the direct tx queue and if the wait time is lager than |
| * specified thresholds it may update ECN flag (if message indicates it is ECN-capable) or drop the message. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_ENABLE |
| #define OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_ENABLE \ |
| (OPENTHREAD_CONFIG_THREAD_VERSION >= OT_THREAD_VERSION_1_3) |
| #endif |
| |
| /** |
| * @OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_MARK_ECN_INTERVAL |
| * |
| * Specifies the time-in-queue threshold interval in milliseconds to mark ECN on a message if it is ECN-capable or |
| * drop the message if not ECN-capable. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_MARK_ECN_INTERVAL |
| #define OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_MARK_ECN_INTERVAL 500 |
| #endif |
| |
| /** |
| * @OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_DROP_MSG_INTERVAL |
| * |
| * Specifies the time-in-queue threshold interval in milliseconds to drop a message. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_DROP_MSG_INTERVAL |
| #define OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_DROP_MSG_INTERVAL 1000 |
| #endif |
| |
| /** |
| * OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_FRAG_TAG_RETAIN_TIME |
| * |
| * Specifies the max retain time in seconds of a mesh header fragmentation tag entry in the list. |
| * |
| * The entry in list is used to track whether an earlier fragment of same message was dropped by the router and if so |
| * the next fragments are also dropped. The entry is removed once last fragment is processed or after the retain time |
| * specified by this config parameter expires. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_FRAG_TAG_RETAIN_TIME |
| #define OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_FRAG_TAG_RETAIN_TIME (4 * 60) // 4 minutes |
| #endif |
| |
| /** |
| * OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_FRAG_TAG_ENTRY_LIST_SIZE |
| * |
| * Specifies the number of mesh header fragmentation tag entries in the list for delay-aware queue management. |
| * |
| * The list is used to track whether an earlier fragment of same message was dropped by the router and if so the next |
| * fragments are also dropped. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_FRAG_TAG_ENTRY_LIST_SIZE |
| #define OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_FRAG_TAG_ENTRY_LIST_SIZE 16 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_MAX_FRAMES_IN_DIRECT_TX_QUEUE |
| * |
| * Specifies the maximum number of frames in direct tx queue before new direct tx messages are dropped. |
| * |
| * If set to zero then the behavior is disabled, i.e., no check is performed on tx queue length. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_MAX_FRAMES_IN_DIRECT_TX_QUEUE |
| #if (OPENTHREAD_CONFIG_THREAD_VERSION >= OT_THREAD_VERSION_1_3) |
| #define OPENTHREAD_CONFIG_MAX_FRAMES_IN_DIRECT_TX_QUEUE 100 |
| #else |
| #define OPENTHREAD_CONFIG_MAX_FRAMES_IN_DIRECT_TX_QUEUE 0 |
| #endif |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_ENABLE |
| * |
| * Define as 1 to enable TX queue time-in-queue statistics collection feature. |
| * |
| * When enabled, histogram of the time-in-queue of messages in the transmit queue is collected. The time-in-queue is |
| * tracked for direct transmissions only and is measured as the duration from when a message is added to the transmit |
| * queue until it is passed to the MAC layer for transmission or dropped. |
| * |
| * The histogram data consists of number of bins, each representing a range of time-in-queue values. The bin interval |
| * length is specified by the `OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_BIN_INTERVAL` configuration, and the |
| * maximum tracked interval is given by the `OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_MAX_INTERVAL`. |
| * |
| * Along with histogram, the maximum observed time-in-queue is also tracked. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_ENABLE |
| #define OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_ENABLE (OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE && OPENTHREAD_FTD) |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_MAX_INTERVAL |
| * |
| * Specifies the maximum time-in-queue interval in milliseconds tracked by the histogram when the TX queue time-in-queue |
| * statistics collection feature is enabled. |
| * |
| * By default the `OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_MARK_ECN_INTERVAL` is used which defines the |
| * maximum time-in-queue interval after which a non-ECN capable message is dropped by delay-aware queue management |
| * feature. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_MAX_INTERVAL |
| #define OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_MAX_INTERVAL \ |
| OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_MARK_ECN_INTERVAL |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_BIN_INTERVAL |
| * |
| * Specifies the time-in-queue histogram bin interval in milliseconds when the TX queue time-in-queue statistics |
| * collection feature is enabled. |
| * |
| * The number of bins is calculated by dividing `OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_MAX_INTERVAL` by |
| * `OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_BIN_INTERVAL` and rounding up to the nearest integer. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_BIN_INTERVAL |
| #define OPENTHREAD_CONFIG_TX_QUEUE_STATISTICS_HISTOGRAM_BIN_INTERVAL 10 |
| #endif |
| |
| #endif // CONFIG_MESH_FORWARDER_H_ |