| /* |
| * Copyright (c) 2016, The OpenThread Authors. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the copyright holder nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "test_platform.h" |
| |
| #include "common/array.hpp" |
| #include "common/code_utils.hpp" |
| #include "common/debug.hpp" |
| #include "common/num_utils.hpp" |
| #include "common/timer.hpp" |
| #include "instance/instance.hpp" |
| |
| namespace ot { |
| |
| enum |
| { |
| kCallCountIndexAlarmStop = 0, |
| kCallCountIndexAlarmStart, |
| kCallCountIndexTimerHandler, |
| |
| kCallCountIndexMax |
| }; |
| |
| uint32_t sNow; |
| uint32_t sPlatT0; |
| uint32_t sPlatDt; |
| bool sTimerOn; |
| uint32_t sCallCount[kCallCountIndexMax]; |
| |
| extern "C" { |
| |
| void otPlatAlarmMilliStop(otInstance *) |
| { |
| sTimerOn = false; |
| sCallCount[kCallCountIndexAlarmStop]++; |
| } |
| |
| void otPlatAlarmMilliStartAt(otInstance *, uint32_t aT0, uint32_t aDt) |
| { |
| sTimerOn = true; |
| sCallCount[kCallCountIndexAlarmStart]++; |
| sPlatT0 = aT0; |
| sPlatDt = aDt; |
| } |
| |
| uint32_t otPlatAlarmMilliGetNow(void) { return sNow; } |
| |
| #if OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE |
| void otPlatAlarmMicroStop(otInstance *) |
| { |
| sTimerOn = false; |
| sCallCount[kCallCountIndexAlarmStop]++; |
| } |
| |
| void otPlatAlarmMicroStartAt(otInstance *, uint32_t aT0, uint32_t aDt) |
| { |
| sTimerOn = true; |
| sCallCount[kCallCountIndexAlarmStart]++; |
| sPlatT0 = aT0; |
| sPlatDt = aDt; |
| } |
| |
| uint32_t otPlatAlarmMicroGetNow(void) { return sNow; } |
| #endif |
| |
| } // extern "C" |
| |
| void InitCounters(void) { memset(sCallCount, 0, sizeof(sCallCount)); } |
| |
| /** |
| * `TestTimer` sub-classes `TimerMilli` and provides a handler and a counter to keep track of number of times timer |
| * gets fired. |
| */ |
| template <typename TimerType> class TestTimer : public TimerType |
| { |
| public: |
| explicit TestTimer(Instance &aInstance) |
| : TimerType(aInstance, TestTimer::HandleTimerFired) |
| , mFiredCounter(0) |
| { |
| } |
| |
| static void HandleTimerFired(Timer &aTimer) { static_cast<TestTimer &>(aTimer).HandleTimerFired(); } |
| |
| void HandleTimerFired(void) |
| { |
| sCallCount[kCallCountIndexTimerHandler]++; |
| mFiredCounter++; |
| } |
| |
| uint32_t GetFiredCounter(void) { return mFiredCounter; } |
| |
| void ResetFiredCounter(void) { mFiredCounter = 0; } |
| |
| static void RemoveAll(Instance &aInstance) { TimerType::RemoveAll(aInstance); } |
| |
| private: |
| uint32_t mFiredCounter; //< Number of times timer has been fired so far |
| }; |
| |
| template <typename TimerType> void AlarmFired(otInstance *aInstance); |
| |
| template <> void AlarmFired<TimerMilli>(otInstance *aInstance) { otPlatAlarmMilliFired(aInstance); } |
| |
| #if OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE |
| template <> void AlarmFired<TimerMicro>(otInstance *aInstance) { otPlatAlarmMicroFired(aInstance); } |
| #endif |
| |
| /** |
| * Test the TimerScheduler's behavior of one timer started and fired. |
| */ |
| template <typename TimerType> int TestOneTimer(void) |
| { |
| const uint32_t kTimeT0 = 1000; |
| const uint32_t kTimerInterval = 10; |
| Instance *instance = testInitInstance(); |
| TestTimer<TimerType> timer(*instance); |
| |
| // Test one Timer basic operation. |
| |
| TestTimer<TimerType>::RemoveAll(*instance); |
| InitCounters(); |
| |
| printf("TestOneTimer() "); |
| |
| sNow = kTimeT0; |
| timer.Start(kTimerInterval); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == 1000 && sPlatDt == 10, "Start params Failed."); |
| VerifyOrQuit(timer.IsRunning(), "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval; |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 1, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 1, "Handler CallCount Failed."); |
| VerifyOrQuit(timer.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == false, "Platform Timer State Failed."); |
| |
| // Test one Timer that spans the 32-bit wrap. |
| |
| InitCounters(); |
| |
| sNow = 0 - (kTimerInterval - 2); |
| timer.Start(kTimerInterval); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == 0 - (kTimerInterval - 2) && sPlatDt == 10, "Start params Failed."); |
| VerifyOrQuit(timer.IsRunning(), "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval; |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 1, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 1, "Handler CallCount Failed."); |
| VerifyOrQuit(timer.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == false, "Platform Timer State Failed."); |
| |
| // Test one Timer that is late by several msec |
| |
| InitCounters(); |
| |
| sNow = kTimeT0; |
| timer.Start(kTimerInterval); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == 1000 && sPlatDt == 10, "Start params Failed."); |
| VerifyOrQuit(timer.IsRunning(), "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval + 5; |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 1, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 1, "Handler CallCount Failed."); |
| VerifyOrQuit(timer.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == false, "Platform Timer State Failed."); |
| |
| // Test one Timer that is early by several msec |
| |
| InitCounters(); |
| |
| sNow = kTimeT0; |
| timer.Start(kTimerInterval); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == 1000 && sPlatDt == 10, "Start params Failed."); |
| VerifyOrQuit(timer.IsRunning(), "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval - 2; |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 2, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(timer.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == true, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval; |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 2, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 1, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 1, "Handler CallCount Failed."); |
| VerifyOrQuit(timer.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == false, "Platform Timer State Failed."); |
| |
| printf(" --> PASSED\n"); |
| |
| testFreeInstance(instance); |
| |
| return 0; |
| } |
| |
| /** |
| * Test the TimerScheduler's behavior of two timers started and fired. |
| */ |
| template <typename TimerType> int TestTwoTimers(void) |
| { |
| const uint32_t kTimeT0 = 1000; |
| const uint32_t kTimerInterval = 10; |
| Instance *instance = testInitInstance(); |
| TestTimer<TimerType> timer1(*instance); |
| TestTimer<TimerType> timer2(*instance); |
| |
| TestTimer<TimerType>::RemoveAll(*instance); |
| printf("TestTwoTimers() "); |
| |
| // Test when second timer stars at the fire time of first timer (before alarm callback). |
| |
| InitCounters(); |
| |
| sNow = kTimeT0; |
| timer1.Start(kTimerInterval); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == kTimeT0 && sPlatDt == kTimerInterval, "Start params Failed."); |
| VerifyOrQuit(timer1.IsRunning(), "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval; |
| |
| timer2.Start(kTimerInterval); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == kTimeT0 && sPlatDt == kTimerInterval, "Start params Failed."); |
| VerifyOrQuit(timer1.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 2, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 1, "Handler CallCount Failed."); |
| VerifyOrQuit(timer1.GetFiredCounter() == 1, "Fire Counter failed."); |
| VerifyOrQuit(sPlatT0 == sNow && sPlatDt == kTimerInterval, "Start params Failed."); |
| VerifyOrQuit(timer1.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == true, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval; |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 2, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 1, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 2, "Handler CallCount Failed."); |
| VerifyOrQuit(timer2.GetFiredCounter() == 1, "Fire Counter failed."); |
| VerifyOrQuit(timer1.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == false, "Platform Timer State Failed."); |
| |
| // Test when second timer starts at the fire time of first timer (before AlarmFired<TimerType>()) and its fire time |
| // is before the first timer. Ensure that the second timer handler is invoked before the first one. |
| |
| InitCounters(); |
| timer1.ResetFiredCounter(); |
| timer2.ResetFiredCounter(); |
| |
| sNow = kTimeT0; |
| timer1.Start(kTimerInterval); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == kTimeT0 && sPlatDt == kTimerInterval, "Start params Failed."); |
| VerifyOrQuit(timer1.IsRunning(), "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval; |
| |
| timer2.StartAt(TimeMilli(kTimeT0), kTimerInterval - 2); // Timer 2 is even before timer 1 |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(timer1.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 1, "Handler CallCount Failed."); |
| VerifyOrQuit(timer2.GetFiredCounter() == 1, "Fire Counter failed."); |
| VerifyOrQuit(sPlatT0 == sNow && sPlatDt == 0, "Start params Failed."); |
| VerifyOrQuit(timer1.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == true, "Platform Timer State Failed."); |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 1, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 2, "Handler CallCount Failed."); |
| VerifyOrQuit(timer1.GetFiredCounter() == 1, "Fire Counter failed."); |
| VerifyOrQuit(timer1.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == false, "Platform Timer State Failed."); |
| |
| // Timer 1 fire callback is late by some ticks/ms, and second timer is scheduled (before call to |
| // AlarmFired) with a maximum interval. This is to test (corner-case) scenario where the fire time of two |
| // timers spanning over the maximum interval. |
| |
| InitCounters(); |
| timer1.ResetFiredCounter(); |
| timer2.ResetFiredCounter(); |
| |
| sNow = kTimeT0; |
| timer1.Start(kTimerInterval); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == kTimeT0 && sPlatDt == kTimerInterval, "Start params Failed."); |
| VerifyOrQuit(timer1.IsRunning(), "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| sNow += kTimerInterval + 5; |
| |
| timer2.Start(Timer::kMaxDelay); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 1, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "Handler CallCount Failed."); |
| VerifyOrQuit(timer1.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn, "Platform Timer State Failed."); |
| |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 2, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 1, "Handler CallCount Failed."); |
| VerifyOrQuit(timer1.GetFiredCounter() == 1, "Fire Counter failed."); |
| VerifyOrQuit(sPlatT0 == sNow, "Start params Failed."); |
| VerifyOrQuit(sPlatDt == Timer::kMaxDelay, "Start params Failed."); |
| VerifyOrQuit(timer1.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == true, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == true, "Platform Timer State Failed."); |
| |
| sNow += Timer::kMaxDelay; |
| AlarmFired<TimerType>(instance); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 2, "Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 1, "Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 2, "Handler CallCount Failed."); |
| VerifyOrQuit(timer2.GetFiredCounter() == 1, "Fire Counter failed."); |
| VerifyOrQuit(timer1.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(timer2.IsRunning() == false, "Timer running Failed."); |
| VerifyOrQuit(sTimerOn == false, "Platform Timer State Failed."); |
| |
| printf(" --> PASSED\n"); |
| |
| testFreeInstance(instance); |
| |
| return 0; |
| } |
| |
| /** |
| * Test the TimerScheduler's behavior of ten timers started and fired. |
| * |
| * `aTimeShift` is added to the t0 and trigger times for all timers. It can be used to check the ten timer behavior |
| * at different start time (e.g., around a 32-bit wrap). |
| */ |
| template <typename TimerType> static void TenTimers(uint32_t aTimeShift) |
| { |
| const uint32_t kNumTimers = 10; |
| const uint32_t kNumTriggers = 7; |
| const uint32_t kTimeT0[kNumTimers] = {1000, 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007, 1008}; |
| const uint32_t kTimerInterval[kNumTimers] = { |
| 20, 100, (Timer::kMaxDelay - kTimeT0[2]), 100000, 1000000, 10, Timer::kMaxDelay, 200, 200, 200}; |
| // Expected timer fire order |
| // timer # Trigger time |
| // 5 1014 |
| // 0 1020 |
| // 1 1100 |
| // 7 1206 |
| // 8 1207 |
| // 9 1208 |
| // 3 101002 |
| // 4 1001003 |
| // 2 kMaxDuration |
| // 6 kMaxDuration + 1005 |
| const uint32_t kTriggerTimes[kNumTriggers] = { |
| 1014, 1020, 1100, 1207, 101004, Timer::kMaxDelay, Timer::kMaxDelay + kTimeT0[6]}; |
| // Expected timers fired by each kTriggerTimes[] value |
| // Trigger # Timers Fired |
| // 0 5 |
| // 1 0 |
| // 2 1 |
| // 3 7, 8 |
| // 4 9, 3 |
| // 5 4, 2 |
| // 6 6 |
| const bool kTimerStateAfterTrigger[kNumTriggers][kNumTimers] = { |
| {true, true, true, true, true, false, true, true, true, true}, // 5 |
| {false, true, true, true, true, false, true, true, true, true}, // 0 |
| {false, false, true, true, true, false, true, true, true, true}, // 1 |
| {false, false, true, true, true, false, true, false, false, true}, // 7, 8 |
| {false, false, true, false, true, false, true, false, false, false}, // 9, 3 |
| {false, false, false, false, false, false, true, false, false, false}, // 4, 2 |
| {false, false, false, false, false, false, false, false, false, false} // 6 |
| }; |
| |
| const bool kSchedulerStateAfterTrigger[kNumTriggers] = {true, true, true, true, true, true, false}; |
| |
| const uint32_t kTimerHandlerCountAfterTrigger[kNumTriggers] = {1, 2, 3, 5, 7, 9, 10}; |
| |
| const uint32_t kTimerStopCountAfterTrigger[kNumTriggers] = {0, 0, 0, 0, 0, 0, 1}; |
| |
| const uint32_t kTimerStartCountAfterTrigger[kNumTriggers] = {3, 4, 5, 7, 9, 11, 11}; |
| |
| Instance *instance = testInitInstance(); |
| |
| TestTimer<TimerType> timer0(*instance); |
| TestTimer<TimerType> timer1(*instance); |
| TestTimer<TimerType> timer2(*instance); |
| TestTimer<TimerType> timer3(*instance); |
| TestTimer<TimerType> timer4(*instance); |
| TestTimer<TimerType> timer5(*instance); |
| TestTimer<TimerType> timer6(*instance); |
| TestTimer<TimerType> timer7(*instance); |
| TestTimer<TimerType> timer8(*instance); |
| TestTimer<TimerType> timer9(*instance); |
| TestTimer<TimerType> *timers[kNumTimers] = {&timer0, &timer1, &timer2, &timer3, &timer4, |
| &timer5, &timer6, &timer7, &timer8, &timer9}; |
| size_t i; |
| |
| printf("TestTenTimer() with aTimeShift=%-10u ", aTimeShift); |
| |
| // Start the Ten timers. |
| |
| TestTimer<TimerType>::RemoveAll(*instance); |
| InitCounters(); |
| |
| for (i = 0; i < kNumTimers; i++) |
| { |
| sNow = kTimeT0[i] + aTimeShift; |
| timers[i]->Start(kTimerInterval[i]); |
| } |
| |
| // given the order in which timers are started, the TimerScheduler should call otPlatAlarmMilliStartAt 2 times. |
| // one for timer[0] and one for timer[5] which will supersede timer[0]. |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == 2, "TestTenTimer: Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == 0, "TestTenTimer: Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == 0, "TestTenTimer: Handler CallCount Failed."); |
| VerifyOrQuit(sPlatT0 == kTimeT0[5] + aTimeShift, "TestTenTimer: Start params Failed."); |
| VerifyOrQuit(sPlatDt == kTimerInterval[5], "TestTenTimer: Start params Failed."); |
| VerifyOrQuit(sTimerOn, "TestTenTimer: Platform Timer State Failed."); |
| |
| for (i = 0; i < kNumTimers; i++) |
| { |
| VerifyOrQuit(timers[i]->IsRunning(), "TestTenTimer: Timer running Failed."); |
| } |
| |
| // Issue the triggers and test the State after each trigger. |
| |
| for (size_t trigger = 0; trigger < kNumTriggers; trigger++) |
| { |
| sNow = kTriggerTimes[trigger] + aTimeShift; |
| |
| do |
| { |
| // By design, each call to AlarmFired<TimerType>() can result in 0 or 1 calls to a timer handler. |
| // For some combinations of sNow and Timers queued, it is necessary to call AlarmFired<TimerType>() |
| // multiple times in order to handle all the expired timers. It can be determined that another |
| // timer is ready to be triggered by examining the aDt arg passed into otPlatAlarmMilliStartAt(). If |
| // that value is 0, then AlarmFired should be fired immediately. This loop calls |
| // AlarmFired<TimerType>() the requisite number of times based on the aDt argument. |
| AlarmFired<TimerType>(instance); |
| } while (sPlatDt == 0); |
| |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStart] == kTimerStartCountAfterTrigger[trigger], |
| "TestTenTimer: Start CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexAlarmStop] == kTimerStopCountAfterTrigger[trigger], |
| "TestTenTimer: Stop CallCount Failed."); |
| VerifyOrQuit(sCallCount[kCallCountIndexTimerHandler] == kTimerHandlerCountAfterTrigger[trigger], |
| "TestTenTimer: Handler CallCount Failed."); |
| VerifyOrQuit(sTimerOn == kSchedulerStateAfterTrigger[trigger], "TestTenTimer: Platform Timer State Failed."); |
| |
| for (i = 0; i < kNumTimers; i++) |
| { |
| VerifyOrQuit(timers[i]->IsRunning() == kTimerStateAfterTrigger[trigger][i], |
| "TestTenTimer: Timer running Failed."); |
| } |
| } |
| |
| for (i = 0; i < kNumTimers; i++) |
| { |
| VerifyOrQuit(timers[i]->GetFiredCounter() == 1, "TestTenTimer: Timer fired counter Failed."); |
| } |
| |
| printf("--> PASSED\n"); |
| |
| testFreeInstance(instance); |
| } |
| |
| template <typename TimerType> int TestTenTimers(void) |
| { |
| // Time shift to change the start/fire time of ten timers. |
| const uint32_t kTimeShift[] = { |
| 0, 100000U, 0U - 1U, 0U - 1100U, Timer::kMaxDelay, Timer::kMaxDelay + 1020U, |
| }; |
| |
| size_t i; |
| |
| for (i = 0; i < GetArrayLength(kTimeShift); i++) |
| { |
| TenTimers<TimerType>(kTimeShift[i]); |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * Test the `Timer::Time` class. |
| */ |
| int TestTimerTime(void) |
| { |
| const uint32_t kMaxTime = 0xffffffff; |
| const uint32_t kStartTimes[] = {0, 100, kMaxTime / 2, kMaxTime - 100, kMaxTime}; |
| const uint32_t kDurations[] = {1, 100, Timer::kMaxDelay - 1, Timer::kMaxDelay}; |
| |
| Time t1; |
| Time t2; |
| |
| for (uint32_t startTime : kStartTimes) |
| { |
| for (uint32_t duration : kDurations) |
| { |
| printf("TestTimerTime() start=%-10x duration=%-10x ", startTime, duration); |
| |
| t1.SetValue(startTime); |
| VerifyOrQuit(t1.GetValue() == startTime, "Time::SetValue() failed."); |
| |
| t2 = t1; |
| VerifyOrQuit(t1.GetValue() == startTime, "Time assignment failed."); |
| |
| VerifyOrQuit(t1 == t2, "Time == failed."); |
| VerifyOrQuit(!(t1 != t2), "Time != failed."); |
| VerifyOrQuit(!(t1 < t2), "Time < failed."); |
| VerifyOrQuit((t1 <= t2), "Time <= failed."); |
| VerifyOrQuit(!(t1 > t2), "Time > failed."); |
| VerifyOrQuit((t1 >= t2), "Time >= failed."); |
| VerifyOrQuit(t2 - t1 == 0, "Time difference failed"); |
| |
| t2 = t1 + duration; |
| VerifyOrQuit(!(t1 == t2), "Time == failed."); |
| VerifyOrQuit((t1 != t2), "Time != failed."); |
| VerifyOrQuit((t1 < t2), "Time < failed."); |
| VerifyOrQuit((t1 <= t2), "Time <= failed."); |
| VerifyOrQuit(!(t1 > t2), "Time > failed."); |
| VerifyOrQuit(!(t1 >= t2), "Time >= failed."); |
| VerifyOrQuit(t2 - t1 == duration, "Time difference failed"); |
| |
| t2 = t1; |
| t2 += duration; |
| VerifyOrQuit(!(t1 == t2), "Time == failed."); |
| VerifyOrQuit((t1 != t2), "Time != failed."); |
| VerifyOrQuit((t1 < t2), "Time < failed."); |
| VerifyOrQuit((t1 <= t2), "Time <= failed."); |
| VerifyOrQuit(!(t1 > t2), "Time > failed."); |
| VerifyOrQuit(!(t1 >= t2), "Time >= failed."); |
| VerifyOrQuit(t2 - t1 == duration, "Time difference failed"); |
| |
| t2 = t1 - duration; |
| VerifyOrQuit(!(t1 == t2), "Time == failed."); |
| VerifyOrQuit((t1 != t2), "Time != failed."); |
| VerifyOrQuit(!(t1 < t2), "Time < failed."); |
| VerifyOrQuit(!(t1 <= t2), "Time <= failed."); |
| VerifyOrQuit((t1 > t2), "Time > failed."); |
| VerifyOrQuit((t1 >= t2), "Time >= failed."); |
| VerifyOrQuit(t1 - t2 == duration, "Time difference failed"); |
| |
| t2 = t1; |
| t2 -= duration; |
| VerifyOrQuit(!(t1 == t2), "Time == failed."); |
| VerifyOrQuit((t1 != t2), "Time != failed."); |
| VerifyOrQuit(!(t1 < t2), "Time < failed."); |
| VerifyOrQuit(!(t1 <= t2), "Time <= failed."); |
| VerifyOrQuit((t1 > t2), "Time > failed."); |
| VerifyOrQuit((t1 >= t2), "Time >= failed."); |
| VerifyOrQuit(t1 - t2 == duration, "Time difference failed"); |
| |
| t2 = t1.GetDistantFuture(); |
| VerifyOrQuit((t1 < t2) && !(t1 > t2), "GetDistanceFuture() failed"); |
| t2 += 1; |
| VerifyOrQuit(!(t1 < t2) || (t1 > t2), "GetDistanceFuture() failed"); |
| |
| t2 = t1.GetDistantPast(); |
| VerifyOrQuit((t1 > t2) && !(t1 < t2), "GetDistantPast() failed"); |
| t2 -= 1; |
| VerifyOrQuit(!(t1 > t2) || (t1 < t2), "GetDistantPast() failed"); |
| |
| VerifyOrQuit(Min(t1, t1.GetDistantFuture()) == t1); |
| VerifyOrQuit(Min(t1.GetDistantFuture(), t1) == t1); |
| |
| VerifyOrQuit(Max(t1, t1.GetDistantPast()) == t1); |
| VerifyOrQuit(Max(t1.GetDistantPast(), t1) == t1); |
| |
| printf("--> PASSED\n"); |
| } |
| } |
| |
| return 0; |
| } |
| |
| template <typename TimerType> void RunTimerTests(void) |
| { |
| TestOneTimer<TimerType>(); |
| TestTwoTimers<TimerType>(); |
| TestTenTimers<TimerType>(); |
| } |
| |
| } // namespace ot |
| |
| int main(void) |
| { |
| ot::RunTimerTests<ot::TimerMilli>(); |
| #if OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE |
| ot::RunTimerTests<ot::TimerMicro>(); |
| #endif |
| ot::TestTimerTime(); |
| printf("All tests passed\n"); |
| return 0; |
| } |
