/** | |
* Copyright (c) 2016 - 2018, Nordic Semiconductor ASA | |
* | |
* All rights reserved. | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* | |
* 1. Redistributions of source code must retain the above copyright notice, this | |
* list of conditions and the following disclaimer. | |
* | |
* 2. Redistributions in binary form, except as embedded into a Nordic | |
* Semiconductor ASA integrated circuit in a product or a software update for | |
* such product, must reproduce the above copyright notice, this list of | |
* conditions and the following disclaimer in the documentation and/or other | |
* materials provided with the distribution. | |
* | |
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its | |
* contributors may be used to endorse or promote products derived from this | |
* software without specific prior written permission. | |
* | |
* 4. This software, with or without modification, must only be used with a | |
* Nordic Semiconductor ASA integrated circuit. | |
* | |
* 5. Any software provided in binary form under this license must not be reverse | |
* engineered, decompiled, modified and/or disassembled. | |
* | |
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS | |
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES | |
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE | |
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE | |
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT | |
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT | |
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
*/ | |
#ifndef APP_USBD_CDC_TYPES_H__ | |
#define APP_USBD_CDC_TYPES_H__ | |
#include <stdint.h> | |
#include <stdbool.h> | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/** | |
* @defgroup app_usbd_cdc_types CDC class types | |
* @ingroup app_usbd_cdc_acm | |
* | |
* @brief @tagAPI52840 Variable types used by the CDC class implementation. | |
* @{ | |
*/ | |
/** | |
* @brief Communications Interface Class code. | |
* | |
* Used for control interface in communication class. | |
* @ref app_usbd_descriptor_iface_t::bInterfaceClass | |
*/ | |
#define APP_USBD_CDC_COMM_CLASS 0x02 | |
/** | |
* @brief Data Class Interface code. | |
* | |
* Used for data interface in communication class. | |
* @ref app_usbd_descriptor_iface_t::bInterfaceClass | |
*/ | |
#define APP_USBD_CDC_DATA_CLASS 0x0A | |
/** | |
* @brief CDC subclass possible values. | |
* | |
* @ref app_usbd_descriptor_iface_t::bInterfaceSubClass | |
*/ | |
typedef enum { | |
APP_USBD_CDC_SUBCLASS_RESERVED = 0x00, /**< Reserved in documentation. */ | |
APP_USBD_CDC_SUBCLASS_DLCM = 0x01, /**< Direct Line Control Model. */ | |
APP_USBD_CDC_SUBCLASS_ACM = 0x02, /**< Abstract Control Model. */ | |
APP_USBD_CDC_SUBCLASS_TCM = 0x03, /**< Telephone Control Model. */ | |
APP_USBD_CDC_SUBCLASS_MCCM = 0x04, /**< Multi-Channel Control Model. */ | |
APP_USBD_CDC_SUBCLASS_CAPI = 0x05, /**< CAPI Control Model. */ | |
APP_USBD_CDC_SUBCLASS_ENCM = 0x06, /**< Ethernet Networking Control Model. */ | |
APP_USBD_CDC_SUBCLASS_ATM = 0x07, /**< ATM Networking Control Model. */ | |
APP_USBD_CDC_SUBCLASS_WHCM = 0x08, /**< Wireless Handset Control Model. */ | |
APP_USBD_CDC_SUBCLASS_DM = 0x09, /**< Device Management. */ | |
APP_USBD_CDC_SUBCLASS_MDLM = 0x0A, /**< Mobile Direct Line Model. */ | |
APP_USBD_CDC_SUBCLASS_OBEX = 0x0B, /**< OBEX. */ | |
APP_USBD_CDC_SUBCLASS_EEM = 0x0C, /**< Ethernet Emulation Model. */ | |
APP_USBD_CDC_SUBCLASS_NCM = 0x0D /**< Network Control Model. */ | |
} app_usbd_cdc_subclass_t; | |
/** | |
* @brief CDC protocol possible values. | |
* | |
* @ref app_usbd_descriptor_iface_t::bInterfaceProtocol | |
*/ | |
typedef enum { | |
APP_USBD_CDC_COMM_PROTOCOL_NONE = 0x00, /**< No class specific protocol required. */ | |
APP_USBD_CDC_COMM_PROTOCOL_AT_V250 = 0x01, /**< AT Commands: V.250 etc. */ | |
APP_USBD_CDC_COMM_PROTOCOL_AT_PCCA101 = 0x02, /**< AT Commands defined by PCCA-101. */ | |
APP_USBD_CDC_COMM_PROTOCOL_AT_PCCA101_ANNEXO = 0x03, /**< AT Commands defined by PCCA-101 & Annex O. */ | |
APP_USBD_CDC_COMM_PROTOCOL_AT_GSM707 = 0x04, /**< AT Commands defined by GSM 07.07. */ | |
APP_USBD_CDC_COMM_PROTOCOL_AT_3GPP_27007 = 0x05, /**< AT Commands defined by 3GPP 27.007. */ | |
APP_USBD_CDC_COMM_PROTOCOL_AT_CDMA = 0x06, /**< AT Commands defined by TIA for CDMA. */ | |
APP_USBD_CDC_COMM_PROTOCOL_EEM = 0x07, /**< Ethernet Emulation Model. */ | |
APP_USBD_CDC_COMM_PROTOCOL_EXTERNAL = 0xFE, /**< External Protocol: Commands defined by Command Set Functional Descriptor. */ | |
APP_USBD_CDC_COMM_PROTOCOL_VENDOR = 0xFF /**< Vendor-specific. */ | |
} app_usbd_cdc_comm_protocol_t; | |
/** | |
* @brief CDC data interface protocols possible values. | |
*/ | |
typedef enum { | |
APP_USBD_CDC_DATA_PROTOCOL_NONE = 0x00, /**< No class specific protocol required. */ | |
APP_USBD_CDC_DATA_PROTOCOL_NTB = 0x01, /**< Network Transfer Block. */ | |
APP_USBD_CDC_DATA_PROTOCOL_ISDN_BRI = 0x30, /**< Physical interface protocol for ISDN BRI. */ | |
APP_USBD_CDC_DATA_PROTOCOL_HDLC = 0x31, /**< HDLC. */ | |
APP_USBD_CDC_DATA_PROTOCOL_TRANSPARENT = 0x32, /**< Transparent. */ | |
APP_USBD_CDC_DATA_PROTOCOL_Q921M = 0x50, /**< Management protocol for Q.921 data link protocol. */ | |
APP_USBD_CDC_DATA_PROTOCOL_Q921 = 0x51, /**< Data link protocol for Q.921. */ | |
APP_USBD_CDC_DATA_PROTOCOL_Q921TM = 0x52, /**< TEI-multiplexor for Q.921 data link protocol. */ | |
APP_USBD_CDC_DATA_PROTOCOL_V42BIS = 0x90, /**< Data compression procedures. */ | |
APP_USBD_CDC_DATA_PROTOCOL_Q931 = 0x91, /**< Euro-ISDN protocol control. */ | |
APP_USBD_CDC_DATA_PROTOCOL_V120 = 0x92, /**< V.24 rate adaptation to ISDN. */ | |
APP_USBD_CDC_DATA_PROTOCOL_CAPI20 = 0x93, /**< CAPI Commands. */ | |
APP_USBD_CDC_DATA_PROTOCOL_HOST = 0xFD, /**< Host based driver. | |
* @note This protocol code should only be used in messages | |
* between host and device to identify the host driver portion | |
* of a protocol stack. | |
*/ | |
APP_USBD_CDC_DATA_PROTOCOL_EXTERNAL = 0xFE, /**< The protocol(s) are described using a Protocol Unit Functional | |
* Descriptors on Communications Class Interface. | |
*/ | |
APP_USBD_CDC_DATA_PROTOCOL_VENDOR = 0xFF /**< Vendor-specific. */ | |
} app_usbd_cdc_data_protocol_t; | |
/** | |
* @brief CDC Functional Descriptor types. | |
*/ | |
typedef enum { | |
APP_USBD_CDC_CS_INTERFACE = 0x24, /**< Class specific interface descriptor type.*/ | |
APP_USBD_CDC_CS_ENDPOINT = 0x25 /**< Class specific endpoint descriptor type.*/ | |
} app_usbd_cdc_func_type_t; | |
/** | |
* @brief CDC Functional Descriptor subtypes. | |
*/ | |
typedef enum { | |
APP_USBD_CDC_SCS_HEADER = 0x00, /**< Header Functional Descriptor, which marks the beginning of the concatenated set of functional descriptors for the interface. */ | |
APP_USBD_CDC_SCS_CALL_MGMT = 0x01, /**< Call Management Functional Descriptor. */ | |
APP_USBD_CDC_SCS_ACM = 0x02, /**< Abstract Control Management Functional Descriptor. */ | |
APP_USBD_CDC_SCS_DLM = 0x03, /**< Direct Line Management Functional Descriptor. */ | |
APP_USBD_CDC_SCS_TEL_R = 0x04, /**< Telephone Ringer Functional Descriptor. */ | |
APP_USBD_CDC_SCS_TEL_CAP = 0x05, /**< Telephone Call and Line State Reporting Capabilities Functional Descriptor. */ | |
APP_USBD_CDC_SCS_UNION = 0x06, /**< Union Functional Descriptor. */ | |
APP_USBD_CDC_SCS_COUNTRY_SEL = 0x07, /**< Country Selection Functional Descriptor. */ | |
APP_USBD_CDC_SCS_TEL_OM = 0x08, /**< Telephone Operational Modes Functional Descriptor. */ | |
APP_USBD_CDC_SCS_USB_TERM = 0x09, /**< USB Terminal Functional Descriptor. */ | |
APP_USBD_CDC_SCS_NCT = 0x0A, /**< Network Channel Terminal Descriptor. */ | |
APP_USBD_CDC_SCS_PU = 0x0B, /**< Protocol Unit Functional Descriptor. */ | |
APP_USBD_CDC_SCS_EU = 0x0C, /**< Extension Unit Functional Descriptor. */ | |
APP_USBD_CDC_SCS_MCM = 0x0D, /**< Multi-Channel Management Functional Descriptor. */ | |
APP_USBD_CDC_SCS_CAPI = 0x0E, /**< CAPI Control Management Functional Descriptor. */ | |
APP_USBD_CDC_SCS_ETH = 0x0F, /**< Ethernet Networking Functional Descriptor. */ | |
APP_USBD_CDC_SCS_ATM = 0x10, /**< ATM Networking Functional Descriptor. */ | |
APP_USBD_CDC_SCS_WHCM = 0x11, /**< Wireless Handset Control Model Functional Descriptor. */ | |
APP_USBD_CDC_SCS_MDLM = 0x12, /**< Mobile Direct Line Model Functional Descriptor. */ | |
APP_USBD_CDC_SCS_MDLM_DET = 0x13, /**< MDLM Detail Functional Descriptor. */ | |
APP_USBD_CDC_SCS_DMM = 0x14, /**< Device Management Model Functional Descriptor. */ | |
APP_USBD_CDC_SCS_OBEX = 0x15, /**< OBEX Functional Descriptor. */ | |
APP_USBD_CDC_SCS_CS = 0x16, /**< Command Set Functional Descriptor. */ | |
APP_USBD_CDC_SCS_CS_DET = 0x17, /**< Command Set Detail Functional Descriptor. */ | |
APP_USBD_CDC_SCS_TEL_CM = 0x18, /**< Telephone Control Model Functional Descriptor. */ | |
APP_USBD_CDC_SCS_OBEX_SI = 0x19, /**< OBEX Service Identifier Functional Descriptor. */ | |
APP_USBD_CDC_SCS_NCM = 0x1A /**< NCM Functional Descriptor. */ | |
} app_usbd_cdc_func_subtype_t; | |
/* Make all descriptors packed */ | |
#pragma pack(push, 1) | |
/** | |
* @brief Header Functional Descriptor. | |
*/ | |
typedef struct { | |
uint8_t bFunctionLength; //!< Size of this descriptor in bytes. | |
uint8_t bDescriptorType; //!< @ref APP_USBD_CDC_CS_INTERFACE descriptor type. | |
uint8_t bDescriptorSubtype; //!< Descriptor subtype @ref APP_USBD_CDC_SCS_HEADER. | |
uint8_t bcdCDC[2]; //!< USB Class Definitions for Communications Devices Specification release number in binary-coded decimal. | |
} app_usbd_cdc_desc_header_t; | |
/** | |
* @brief Call management capabilities. | |
* | |
* @ref app_usbd_cdc_desc_call_mgmt_t::bmCapabilities bit. | |
* */ | |
typedef enum { | |
APP_USBD_CDC_CALL_MGMT_SUPPORTED = (1 << 0), /**< Call management capability bit 0.*/ | |
APP_USBD_CDC_CALL_MGMT_OVER_DCI = (1 << 1), /**< Call management capability bit 1.*/ | |
} app_subd_cdc_call_mgmt_cap_t; | |
/** | |
* @brief CDC Call Management Functional Descriptor. | |
*/ | |
typedef struct { | |
uint8_t bFunctionLength; //!< Size of this functional descriptor, in bytes. | |
uint8_t bDescriptorType; //!< Descriptor type @ref APP_USBD_CDC_CS_INTERFACE. | |
uint8_t bDescriptorSubtype; //!< Descriptor subtype @ref APP_USBD_CDC_SCS_CALL_MGMT. | |
uint8_t bmCapabilities; //!< Capabilities @ref app_subd_cdc_call_mgmt_cap_t. | |
uint8_t bDataInterface; //!< Data interface number. | |
} app_usbd_cdc_desc_call_mgmt_t; | |
/** | |
* @brief ACM capabilities. | |
* | |
* @ref app_usbd_cdc_desc_acm_t::bmCapabilities bit. | |
* */ | |
typedef enum { | |
APP_USBD_CDC_ACM_FEATURE_REQUESTS = (1 << 0), /**< ACM capability bit FEATURE_REQUESTS. */ | |
APP_USBD_CDC_ACM_LINE_REQUESTS = (1 << 1), /**< ACM capability bit LINE_REQUESTS. */ | |
APP_USBD_CDC_ACM_SENDBREAK_REQUESTS = (1 << 2), /**< ACM capability bit SENDBREAK_REQUESTS.*/ | |
APP_USBD_CDC_ACM_NOTIFY_REQUESTS = (1 << 3), /**< ACM capability bit NOTIFY_REQUESTS. */ | |
} app_subd_cdc_acm_cap_t; | |
/** | |
* @brief CDC ACM Functional Descriptor. | |
*/ | |
typedef struct { | |
uint8_t bFunctionLength; //!< Size of this functional descriptor, in bytes. | |
uint8_t bDescriptorType; //!< Descriptor type @ref APP_USBD_CDC_CS_INTERFACE. | |
uint8_t bDescriptorSubtype; //!< Descriptor subtype @ref APP_USBD_CDC_SCS_ACM. | |
uint8_t bmCapabilities; //!< Capabilities @ref app_subd_cdc_acm_cap_t. | |
} app_usbd_cdc_desc_acm_t; | |
/** | |
* @brief Union Functional Descriptor. | |
*/ | |
typedef struct { | |
uint8_t bFunctionLength; //!< Size of this functional descriptor, in bytes. | |
uint8_t bDescriptorType; //!< Descriptor type @ref APP_USBD_CDC_CS_INTERFACE. | |
uint8_t bDescriptorSubtype; //!< Descriptor subtype @ref APP_USBD_CDC_SCS_UNION. | |
uint8_t bControlInterface; //!< The interface number of the Communications or Data Class interface, designated as the controlling interface for the union. | |
uint8_t bSubordinateInterface[]; //!< Interface number of subordinate interfaces in the union. Number of interfaced depends on descriptor size. | |
} app_usbd_cdc_desc_union_t; | |
/** | |
* @brief Country Selection Functional Descriptor. | |
*/ | |
typedef struct { | |
uint8_t bFunctionLength; //!< Size of this functional descriptor, in bytes. | |
uint8_t bDescriptorType; //!< Descriptor type @ref APP_USBD_CDC_CS_INTERFACE. | |
uint8_t bDescriptorSubtype; //!< Descriptor subtype @ref APP_USBD_CDC_SCS_COUNTRY_SEL. | |
uint8_t iCountryCodeRelDate; //!< Index of a string giving the release date for the implemented ISO 3166 Country Codes. | |
} app_usbd_cdc_desc_country_sel_t; | |
/** | |
* @brief CDC Requests | |
* | |
*/ | |
typedef enum { | |
/* CDC General */ | |
APP_USBD_CDC_REQ_SEND_ENCAPSULATED_COMMAND = 0x00, /**< This request is used to issue a command in the format of the supported control protocol of the Communications Class interface. */ | |
APP_USBD_CDC_REQ_GET_ENCAPSULATED_RESPONSE = 0x01, /**< This request is used to request a response in the format of the supported control protocol of the Communications Class interface. */ | |
/* CDC PSTN */ | |
APP_USBD_CDC_REQ_SET_COMM_FEATURE = 0x02, /**< This request controls the settings for a particular communications feature of a particular target. */ | |
APP_USBD_CDC_REQ_GET_COMM_FEATURE = 0x03, /**< This request returns the current settings for the communications feature as selected. */ | |
APP_USBD_CDC_REQ_CLEAR_COMM_FEATURE = 0x04, /**< This request controls the settings for a particular communications feature of a particular target, setting the selected feature to its default state. */ | |
APP_USBD_CDC_REQ_SET_AUX_LINE_STATE = 0x10, /**< This request is used to connect or disconnect a secondary jack to POTS circuit or CODEC, depending on hook state. */ | |
APP_USBD_CDC_REQ_SET_HOOK_STATE = 0x11, /**< This request is used to set the necessary PSTN line relay code for on-hook, off-hook, and caller ID states. */ | |
APP_USBD_CDC_REQ_PULSE_SETUP = 0x12, /**< This request is used to prepare for a pulse-dialing cycle. */ | |
APP_USBD_CDC_REQ_SEND_PULSE = 0x13, /**< This request is used to generate a specified number of make/break pulse cycles. */ | |
APP_USBD_CDC_REQ_SET_PULSE_TIME = 0x14, /**< This request sets the timing of the make and break periods for pulse dialing. */ | |
APP_USBD_CDC_REQ_RING_AUX_JACK = 0x15, /**< This request is used to generate a ring signal on a secondary phone jack. */ | |
APP_USBD_CDC_REQ_SET_LINE_CODING = 0x20, /**< This request allows the host to specify typical asynchronous line-character formatting properties. */ | |
APP_USBD_CDC_REQ_GET_LINE_CODING = 0x21, /**< This request allows the host to find out the currently configured line coding. */ | |
APP_USBD_CDC_REQ_SET_CONTROL_LINE_STATE = 0x22, /**< This request generates RS-232/V.24 style control signals. */ | |
APP_USBD_CDC_REQ_SEND_BREAK = 0x23, /**< This request sends special carrier modulation that generates an RS-232 style break. */ | |
APP_USBD_CDC_REQ_SET_RINGER_PARMS = 0x30, /**< This request configures the ringer for the communications device. */ | |
APP_USBD_CDC_REQ_GET_RINGER_PARMS = 0x31, /**< This request returns the ringer capabilities of the device and the current status of the device’s ringer. */ | |
APP_USBD_CDC_REQ_SET_OPERATION_PARMS = 0x32, /**< Sets the operational mode for the device, between a simple mode, standalone mode and a host centric mode. */ | |
APP_USBD_CDC_REQ_GET_OPERATION_PARMS = 0x33, /**< This request gets the current operational mode for the device. */ | |
APP_USBD_CDC_REQ_SET_LINE_PARMS = 0x34, /**< This request is used to change the state of the line, corresponding to the interface or master interface of a union to which the command was sent. */ | |
APP_USBD_CDC_REQ_GET_LINE_PARMS = 0x35, /**< This request is used to report the state of the line that corresponds to the interface or master interface of a union to which the command was sent. */ | |
APP_USBD_CDC_REQ_DIAL_DIGITS = 0x36, /**< This request dials the DTMF digits over the specified line. */ | |
} app_usbd_cdc_req_id_t; | |
/** | |
* @brief CDC Notifications. | |
*/ | |
typedef enum { | |
/* CDC General */ | |
APP_USBD_CDC_NOTIF_NETWORK_CONNECTION = 0x00, /**< This notification allows the device to notify the host about network connection status. */ | |
APP_USBD_CDC_NOTIF_RESPONSE_AVAILABLE = 0x01, /**< This notification allows the device to notify the host that a response is available. | |
* This response can be retrieved with a subsequent GetEncapsulatedResponse request. | |
_ */ | |
APP_USBD_CDC_NOTIF_CONNECTION_SPEED_CHANGE = 0x2A, /**< This notification allows the device to inform the host-networking driver | |
* that a change in either the up-link or the down-link bit rate of the connection has occurred. | |
*/ | |
/* CDC PSTN */ | |
APP_USBD_CDC_NOTIF_AUX_JACK_HOOK_STATE = 0x08, /**< (DLM) This notification indicates the loop has changed on the auxiliary phone interface of the USB device. */ | |
APP_USBD_CDC_NOTIF_RING_DETECT = 0x09, /**< (DLM) This notification indicates ring voltage on the POTS line interface of the USB device. */ | |
APP_USBD_CDC_NOTIF_SERIAL_STATE = 0x20, /**< (ACM) This notification sends asynchronous notification of UART status. */ | |
APP_USBD_CDC_NOTIF_CALL_STATE_CHANGE = 0x28, /**< (TCM) This notification identifies that a change has occurred to the state of a call on the line corresponding to the interface or union for the line. */ | |
APP_USBD_CDC_NOTIF_LINE_STATE_CHANGE = 0x29 /**< (TCM) This notification identifies that a change has occurred to the state of the line corresponding to the interface or master interface of a union sending the notification message. */ | |
} app_usbd_cdc_notify_id_t; | |
/** | |
* @brief Notification sent via CDC COMM endpoint. | |
* */ | |
typedef struct { | |
uint8_t bmRequestType; //!< Request type. | |
uint8_t bmRequest; //!< Request ID @ref app_usbd_cdc_req_id_t. | |
uint16_t wValue; //!< Value field. | |
uint16_t wIndex; //!< Index field. | |
uint16_t wLength; //!< Length of payload following. | |
} app_usbd_cdc_notify_t; | |
/** | |
* @brief CDC line coding structure. | |
*/ | |
typedef struct { | |
uint8_t dwDTERate[4]; //!< Line baudrate. | |
uint8_t bCharFormat; //!< Character format @ref app_usbd_cdc_line_stopbit_t. | |
uint8_t bParityType; //!< Parity bits @ref app_usbd_cdc_line_parity_t. | |
uint8_t bDataBits; //!< Number of data bits. | |
} app_usbd_cdc_line_coding_t; | |
/** | |
* @brief Possible values of @ref app_usbd_cdc_line_coding_t::bCharFormat. | |
*/ | |
typedef enum { | |
APP_USBD_CDC_LINE_STOPBIT_1 = 0, /**< 1 stop bit. */ | |
APP_USBD_CDC_LINE_STOPBIT_1_5 = 1, /**< 1.5 stop bits. */ | |
APP_USBD_CDC_LINE_STOPBIT_2 = 2, /**< 2 stop bits. */ | |
} app_usbd_cdc_line_stopbit_t; | |
/** | |
* @brief Possible values of @ref app_usbd_cdc_line_coding_t::bParityType. | |
*/ | |
typedef enum { | |
APP_USBD_CDC_LINE_PARITY_NONE = 0, /**< No parity. */ | |
APP_USBD_CDC_LINE_PARITY_ODD = 1, /**< Odd parity. */ | |
APP_USBD_CDC_LINE_PARITY_EVEN = 2, /**< Even parity. */ | |
APP_USBD_CDC_LINE_PARITY_MARK = 3, /**< Parity forced to 0 (space).*/ | |
APP_USBD_CDC_LINE_PARITY_SPACE = 4, /**< Parity forced to 1 (mark). */ | |
} app_usbd_cdc_line_parity_t; | |
#pragma pack(pop) | |
/** @} */ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* APP_USBD_TYPES_H__ */ |