third_party/NordicSemiconductor/drivers/radio/nrf_802154_config.h - third_party/openthread - Git at Google

 /* Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
  *
  *   1. Redistributions of source code must retain the above copyright notice, this
  *      list of conditions and the following disclaimer.
  *
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *
  *   3. Neither the name of Nordic Semiconductor ASA nor the names of its
  *      contributors may be used to endorse or promote products derived from
  *      this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  */

 #ifndef NRF_802154_CONFIG_H__
 #define NRF_802154_CONFIG_H__

 #ifdef NRF_802154_PROJECT_CONFIG
 #include NRF_802154_PROJECT_CONFIG
 #endif

 #include <nrf.h>

 #ifdef __cplusplus
 extern "C" {
 #endif

 /**
  * @defgroup nrf_802154_config 802.15.4 driver configuration
  * @{
  * @ingroup nrf_802154
  * @brief Configuration of the 802.15.4 radio driver for nRF SoCs.
  */

 /**
  * @defgroup nrf_802154_config_radio Radio driver configuration
  * @{
  */

 /**
  * @def NRF_802154_CCA_MODE_DEFAULT
  *
  * CCA mode used by the driver.
  *
  */
 #ifndef NRF_802154_CCA_MODE_DEFAULT
 #define NRF_802154_CCA_MODE_DEFAULT NRF_RADIO_CCA_MODE_ED
 #endif

 /**
  * @def NRF_802154_CCA_ED_THRESHOLD_DEFAULT
  *
  * Energy detection threshold used in the CCA procedure.
  *
  */
 #ifndef NRF_802154_CCA_ED_THRESHOLD_DEFAULT
 #define NRF_802154_CCA_ED_THRESHOLD_DEFAULT 0x14
 #endif

 /**
  * @def NRF_802154_CCA_CORR_THRESHOLD_DEFAULT
  *
  * Correlator threshold used in the CCA procedure.
  *
  */
 #ifndef NRF_802154_CCA_CORR_THRESHOLD_DEFAULT
 #define NRF_802154_CCA_CORR_THRESHOLD_DEFAULT 0x14
 #endif

 /**
  * @def NRF_802154_CCA_CORR_LIMIT_DEFAULT
  *
  * Correlator limit used in the CCA procedure.
  *
  */
 #ifndef NRF_802154_CCA_CORR_LIMIT_DEFAULT
 #define NRF_802154_CCA_CORR_LIMIT_DEFAULT 0x02
 #endif

 /**
  * @def NRF_802154_INTERNAL_RADIO_IRQ_HANDLING
  *
  * If the driver is expected to internally handle the RADIO IRQ.
  * If the driver is used in an OS, the RADIO IRQ can be handled by the OS and passed to
  * the driver by @ref nrf_802154_radio_irq_handler.
  * In this case, the internal handling must be disabled.
  *
  */

 #ifndef NRF_802154_INTERNAL_RADIO_IRQ_HANDLING

 #if RAAL_SOFTDEVICE || RAAL_REM
 #define NRF_802154_INTERNAL_RADIO_IRQ_HANDLING 0
 #else // RAAL_SOFTDEVICE || RAAL_REM
 #define NRF_802154_INTERNAL_RADIO_IRQ_HANDLING 1
 #endif  // RAAL_SOFTDEVICE || RAAL_REM

 #endif // NRF_802154_INTERNAL_RADIO_IRQ_HANDLING

 /**
  * @def NRF_802154_IRQ_PRIORITY
  *
  * Interrupt priority for RADIO peripheral.
  * Keep the IRQ priority high (low number) to prevent losing frames due to preemption.
  *
  */
 #ifndef NRF_802154_IRQ_PRIORITY
 #define NRF_802154_IRQ_PRIORITY 0
 #endif

 /**
  * @def NRF_802154_TIMER_INSTANCE
  *
  * The timer instance used both by the driver for ACK IFS and by the FEM module.
  *
  */
 #ifndef NRF_802154_TIMER_INSTANCE
 #define NRF_802154_TIMER_INSTANCE NRF_TIMER1
 #endif

 /**
  * @def NRF_802154_COUNTER_TIMER_INSTANCE
  *
  * The timer instance used by the driver for detecting when PSDU is being received.
  *
  * @note This configuration is used only when the NRF_RADIO_EVENT_BCMATCH event handling is disabled
  *       (see @ref NRF_802154_DISABLE_BCC_MATCHING).
  */
 #ifndef NRF_802154_COUNTER_TIMER_INSTANCE
 #define NRF_802154_COUNTER_TIMER_INSTANCE NRF_TIMER2
 #endif

 /**
  * @def NRF_802154_SWI_EGU_INSTANCE
  *
  * The SWI EGU instance used by the driver to synchronize PPIs and for requests and notifications if
  * SWI is in use.
  *
  * @note This option is used by the core module regardless of the driver configuration.
  *
  */
 #ifndef NRF_802154_SWI_EGU_INSTANCE

 #ifdef NRF52811_XXAA
 #define NRF_802154_SWI_EGU_INSTANCE NRF_EGU0
 #else
 #define NRF_802154_SWI_EGU_INSTANCE NRF_EGU3
 #endif

 #endif

 /**
  * @def NRF_802154_SWI_IRQ_HANDLER
  *
  * The SWI EGU IRQ handler used by the driver for requests and notifications if SWI is in use.
  *
  * @note This option is used when the driver uses SWI to process requests and notifications.
  *
  */
 #ifndef NRF_802154_SWI_IRQ_HANDLER
 #define NRF_802154_SWI_IRQ_HANDLER SWI3_EGU3_IRQHandler
 #endif

 /**
  * @def NRF_802154_SWI_IRQN
  *
  * The SWI EGU IRQ number used by the driver for requests and notifications if SWI is in use.
  *
  * @note This option is used when the driver uses SWI to process requests and notifications.
  *
  */
 #ifndef NRF_802154_SWI_IRQN
 #define NRF_802154_SWI_IRQN SWI3_EGU3_IRQn
 #endif

 /**
  * @def NRF_802154_SWI_PRIORITY
  *
  * The priority of software interrupt used for requests and notifications.
  *
  */
 #ifndef NRF_802154_SWI_PRIORITY
 #define NRF_802154_SWI_PRIORITY 5
 #endif

 /**
  * @def NRF_802154_USE_RAW_API
  *
  * When this flag is set, the RAW API is available for the MAC layer. It is recommended to use
  * the RAW API because it provides more optimized functions.
  *
  * @note If the RAW API is not available for the MAC layer, only less optimized functions performing
  *       copy are available.
  *
  */
 #ifndef NRF_802154_USE_RAW_API
 #define NRF_802154_USE_RAW_API 1
 #endif

 /**
  * @def NRF_802154_PENDING_SHORT_ADDRESSES
  *
  * The number of slots containing short addresses of nodes for which the pending data is stored.
  *
  */
 #ifndef NRF_802154_PENDING_SHORT_ADDRESSES
 #define NRF_802154_PENDING_SHORT_ADDRESSES 10
 #endif

 /**
  * @def NRF_802154_PENDING_EXTENDED_ADDRESSES
  *
  * The number of slots containing extended addresses of nodes for which the pending data is stored.
  *
  */
 #ifndef NRF_802154_PENDING_EXTENDED_ADDRESSES
 #define NRF_802154_PENDING_EXTENDED_ADDRESSES 10
 #endif

 /**
  * @def NRF_802154_RX_BUFFERS
  *
  * The number of buffers in the receive queue.
  *
  */
 #ifndef NRF_802154_RX_BUFFERS
 #define NRF_802154_RX_BUFFERS 16
 #endif

 /**
  * @def NRF_802154_DISABLE_BCC_MATCHING
  *
  * Setting this flag disables NRF_RADIO_EVENT_BCMATCH handling, and therefore the address filtering
  * during the frame reception. With this flag set to 1, the address filtering is done after
  * receiving a frame, during NRF_RADIO_EVENT_END handling.
  *
  */
 #ifndef NRF_802154_DISABLE_BCC_MATCHING
 #define NRF_802154_DISABLE_BCC_MATCHING 0
 #endif

 /**
  * @def NRF_802154_NOTIFY_CRCERROR
  *
  * With this flag set to 1, the CRC errors are notified to upper layers. This requires an interrupt
  * handler to be used.
  *
  */
 #ifndef NRF_802154_NOTIFY_CRCERROR
 #define NRF_802154_NOTIFY_CRCERROR 1
 #endif

 /**
  * @def NRF_802154_FRAME_TIMESTAMP_ENABLED
  *
  * If timestamps are to be added to the frames received.
  * Enabling this feature enables the functions @ref nrf_802154_received_timsestamp_raw,
  * @ref nrf_802154_received_timestamp, @ref nrf_802154_transmitted_timestamp_raw, and
  * @ref nrf_802154_transmitted_timestamp, which add timestamps to the frames received.
  *
  */
 #ifndef NRF_802154_FRAME_TIMESTAMP_ENABLED
 #define NRF_802154_FRAME_TIMESTAMP_ENABLED 1
 #endif

 /**
  * @def NRF_802154_DELAYED_TRX_ENABLED
  *
  * If the delayed transmission and the receive window features are available.
  *
  */
 #ifndef NRF_802154_DELAYED_TRX_ENABLED
 #define NRF_802154_DELAYED_TRX_ENABLED 1
 #endif

 /**
  * @}
  * @defgroup nrf_802154_config_clock Clock driver configuration
  * @{
  */

 /**
  * @def NRF_802154_CLOCK_IRQ_PRIORITY
  *
  * The priority of clock interrupt used in the standalone clock driver implementation.
  *
  * @note This configuration is only applicable for the Clock Abstraction Layer implementation
  *       in nrf_802154_clock_nodrv.c.
  *
  */
 #ifndef NRF_802154_CLOCK_IRQ_PRIORITY
 #define NRF_802154_CLOCK_IRQ_PRIORITY 7
 #endif

 /**
  * @def NRF_802154_CLOCK_LFCLK_SOURCE
  *
  * The low-frequency clock source used in the standalone clock driver implementation.
  *
  * @note This configuration is only applicable for the Clock Abstraction Layer implementation
  *       in nrf_802154_clock_nodrv.c.
  *
  */
 #ifndef NRF_802154_CLOCK_LFCLK_SOURCE
 #define NRF_802154_CLOCK_LFCLK_SOURCE NRF_CLOCK_LFCLK_Xtal
 #endif

 /**
  * @}
  * @defgroup nrf_802154_config_rtc RTC driver configuration
  * @{
  */

 /**
  * @def NRF_802154_RTC_IRQ_PRIORITY
  *
  * The priority of RTC interrupt used in the standalone timer driver implementation.
  *
  * @note This configuration is only applicable for the Low Power Timer Abstraction Layer
  *       implementation in nrf_802154_lp_timer_nodrv.c.
  *
  */
 #ifndef NRF_802154_RTC_IRQ_PRIORITY
 #define NRF_802154_RTC_IRQ_PRIORITY 6
 #endif

 /**
  * @def NRF_802154_RTC_INSTANCE
  *
  * The RTC instance used in the standalone timer driver implementation.
  *
  * @note This configuration is only applicable for the Low Power Timer Abstraction Layer
  *       implementation in nrf_802154_lp_timer_nodrv.c.
  *
  */
 #ifndef NRF_802154_RTC_INSTANCE

 #ifdef NRF52811_XXAA
 #define NRF_802154_RTC_INSTANCE NRF_RTC0
 #else
 #define NRF_802154_RTC_INSTANCE NRF_RTC2
 #endif

 #endif

 /**
  * @def NRF_802154_RTC_IRQ_HANDLER
  *
  * The RTC interrupt handler name used in the standalone timer driver implementation.
  *
  * @note This configuration is only applicable for Low Power Timer Abstraction Layer implementation
  *       in nrf_802154_lp_timer_nodrv.c.
  *
  */
 #ifndef NRF_802154_RTC_IRQ_HANDLER

 #ifdef NRF52811_XXAA
 #define NRF_802154_RTC_IRQ_HANDLER RTC0_IRQHandler
 #else
 #define NRF_802154_RTC_IRQ_HANDLER RTC2_IRQHandler
 #endif

 #endif

 /**
  * @def NRF_802154_RTC_IRQN
  *
  * The RTC Interrupt number used in the standalone timer driver implementation.
  *
  * @note This configuration is only applicable for the Low Power Timer Abstraction Layer implementation
  *       in nrf_802154_lp_timer_nodrv.c.
  *
  */
 #ifndef NRF_802154_RTC_IRQN

 #ifdef NRF52811_XXAA
 #define NRF_802154_RTC_IRQN RTC0_IRQn
 #else
 #define NRF_802154_RTC_IRQN RTC2_IRQn
 #endif

 #endif

 /**
  * @}
  * @defgroup nrf_802154_config_csma CSMA/CA procedure configuration
  * @{
  */

 /**
  * @def NRF_802154_CSMA_CA_ENABLED
  *
  * If CSMA-CA is to be enabled by the driver. Disabling CSMA-CA improves
  * the driver performance.
  *
  */
 #ifndef NRF_802154_CSMA_CA_ENABLED
 #define NRF_802154_CSMA_CA_ENABLED 1
 #endif

 /**
  * @def NRF_802154_CSMA_CA_MIN_BE
  *
  * The minimum value of the backoff exponent (BE) in the CSMA-CA algorithm
  * (see IEEE 802.15.4-2015: 6.2.5.1).
  *
  */
 #ifndef NRF_802154_CSMA_CA_MIN_BE
 #define NRF_802154_CSMA_CA_MIN_BE 3
 #endif

 /**
  * @def NRF_802154_CSMA_CA_MAX_BE
  *
  * The maximum value of the backoff exponent, BE, in the CSMA-CA algorithm
  * (see IEEE 802.15.4-2015: 6.2.5.1).
  *
  */
 #ifndef NRF_802154_CSMA_CA_MAX_BE
 #define NRF_802154_CSMA_CA_MAX_BE 5
 #endif

 /**
  * @def NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS
  *
  * The maximum number of backoffs that the CSMA-CA algorithm will attempt before declaring a channel
  * access failure.
  *
  */
 #ifndef NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS
 #define NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS 4
 #endif

 /**
  * @def NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT
  *
  * Indicates whether the CSMA-CA algorithm waits for an available timeslot before it performs
  * the CCA procedure.
  *
  * @note When this option is enabled, the CSMA-CA procedure can be synchronized with timeslots of
  *       other protocols. This decreases the robustness of the CSMA-CA procedure. On the other hand,
  *       enabling this function increases the performance of multi-protocol applications, especially
  *       when protocols other than 802.15.4 use much of the radio time (like the BLE scanning
  *       operation).
  *
  */
 #ifndef NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT
 #define NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT 1
 #endif

 /**
  * @}
  * @defgroup nrf_802154_config_timeout ACK timeout feature configuration
  * @{
  */

 /**
  * @def NRF_802154_ACK_TIMEOUT_ENABLED
  *
  * Indicates whether the ACK timeout feature is to be enabled in the driver.
  *
  */
 #ifndef NRF_802154_ACK_TIMEOUT_ENABLED
 #define NRF_802154_ACK_TIMEOUT_ENABLED 1
 #endif

 /**
  * @def NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT
  *
  * The default timeout in microseconds (us) for the ACK timeout feature.
  *
  */
 #ifndef NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT
 #define NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT 7000
 #endif

 /**
  * @def NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT
  *
  * The default timeout in microseconds (us) for the precise ACK timeout feature.
  *
  */
 #ifndef NRF_802154_PRECISE_ACK_TIMEOUT_DEFAULT_TIMEOUT
 #define NRF_802154_PRECISE_ACK_TIMEOUT_DEFAULT_TIMEOUT 210
 #endif

 /**
  * @def NRF_802154_MAX_ACK_IE_SIZE
  *
  * The maximum supported size of the 802.15.4-2015 IE header and content fields in an Enh-Ack.
  *
  */
 #ifndef NRF_802154_MAX_ACK_IE_SIZE
 #define NRF_802154_MAX_ACK_IE_SIZE 8
 #endif

 /**
  * @}
  * @defgroup nrf_802154_config_transmission Transmission start notification feature configuration
  * @{
  */

 /**
  * @def NRF_802154_TX_STARTED_NOTIFY_ENABLED
  *
  * Indicates whether the notifications of the started transmissions are to be enabled in the driver.
  *
  * @note This feature is enabled by default if the ACK timeout feature or CSMA-CA is enabled.
  *       These features depend on the notifications of the transmission start.
  */
 #ifndef NRF_802154_TX_STARTED_NOTIFY_ENABLED
 #if NRF_802154_ACK_TIMEOUT_ENABLED || NRF_802154_CSMA_CA_ENABLED
 #define NRF_802154_TX_STARTED_NOTIFY_ENABLED 1
 #else
 #define NRF_802154_TX_STARTED_NOTIFY_ENABLED 0
 #endif
 #endif // NRF_802154_TX_STARTED_NOTIFY_ENABLED

 /**
  *@}
  **/

 #ifdef __cplusplus
 }
 #endif

 #endif // NRF_802154_CONFIG_H__

 /**
  *@}
  **/
	/* Copyright (c) 2017 - 2018, Nordic Semiconductor ASA
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	*
	* 1. Redistributions of source code must retain the above copyright notice, this
	* list of conditions and the following disclaimer.
	*
	* 2. Redistributions in binary form must reproduce the above copyright notice,
	* this list of conditions and the following disclaimer in the documentation
	* and/or other materials provided with the distribution.
	*
	* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
	* contributors may be used to endorse or promote products derived from
	* this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
	* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
	* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
	* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	*/

	#ifndef NRF_802154_CONFIG_H__
	#define NRF_802154_CONFIG_H__

	#ifdef NRF_802154_PROJECT_CONFIG
	#include NRF_802154_PROJECT_CONFIG
	#endif

	#include <nrf.h>

	#ifdef __cplusplus
	extern "C" {
	#endif

	/**
	* @defgroup nrf_802154_config 802.15.4 driver configuration
	* @{
	* @ingroup nrf_802154
	* @brief Configuration of the 802.15.4 radio driver for nRF SoCs.
	*/

	/**
	* @defgroup nrf_802154_config_radio Radio driver configuration
	* @{
	*/

	/**
	* @def NRF_802154_CCA_MODE_DEFAULT
	*
	* CCA mode used by the driver.
	*
	*/
	#ifndef NRF_802154_CCA_MODE_DEFAULT
	#define NRF_802154_CCA_MODE_DEFAULT NRF_RADIO_CCA_MODE_ED
	#endif

	/**
	* @def NRF_802154_CCA_ED_THRESHOLD_DEFAULT
	*
	* Energy detection threshold used in the CCA procedure.
	*
	*/
	#ifndef NRF_802154_CCA_ED_THRESHOLD_DEFAULT
	#define NRF_802154_CCA_ED_THRESHOLD_DEFAULT 0x14
	#endif

	/**
	* @def NRF_802154_CCA_CORR_THRESHOLD_DEFAULT
	*
	* Correlator threshold used in the CCA procedure.
	*
	*/
	#ifndef NRF_802154_CCA_CORR_THRESHOLD_DEFAULT
	#define NRF_802154_CCA_CORR_THRESHOLD_DEFAULT 0x14
	#endif

	/**
	* @def NRF_802154_CCA_CORR_LIMIT_DEFAULT
	*
	* Correlator limit used in the CCA procedure.
	*
	*/
	#ifndef NRF_802154_CCA_CORR_LIMIT_DEFAULT
	#define NRF_802154_CCA_CORR_LIMIT_DEFAULT 0x02
	#endif

	/**
	* @def NRF_802154_INTERNAL_RADIO_IRQ_HANDLING
	*
	* If the driver is expected to internally handle the RADIO IRQ.
	* If the driver is used in an OS, the RADIO IRQ can be handled by the OS and passed to
	* the driver by @ref nrf_802154_radio_irq_handler.
	* In this case, the internal handling must be disabled.
	*
	*/

	#ifndef NRF_802154_INTERNAL_RADIO_IRQ_HANDLING

	#if RAAL_SOFTDEVICE \|\| RAAL_REM
	#define NRF_802154_INTERNAL_RADIO_IRQ_HANDLING 0
	#else // RAAL_SOFTDEVICE \|\| RAAL_REM
	#define NRF_802154_INTERNAL_RADIO_IRQ_HANDLING 1
	#endif // RAAL_SOFTDEVICE \|\| RAAL_REM

	#endif // NRF_802154_INTERNAL_RADIO_IRQ_HANDLING

	/**
	* @def NRF_802154_IRQ_PRIORITY
	*
	* Interrupt priority for RADIO peripheral.
	* Keep the IRQ priority high (low number) to prevent losing frames due to preemption.
	*
	*/
	#ifndef NRF_802154_IRQ_PRIORITY
	#define NRF_802154_IRQ_PRIORITY 0
	#endif

	/**
	* @def NRF_802154_TIMER_INSTANCE
	*
	* The timer instance used both by the driver for ACK IFS and by the FEM module.
	*
	*/
	#ifndef NRF_802154_TIMER_INSTANCE
	#define NRF_802154_TIMER_INSTANCE NRF_TIMER1
	#endif

	/**
	* @def NRF_802154_COUNTER_TIMER_INSTANCE
	*
	* The timer instance used by the driver for detecting when PSDU is being received.
	*
	* @note This configuration is used only when the NRF_RADIO_EVENT_BCMATCH event handling is disabled
	* (see @ref NRF_802154_DISABLE_BCC_MATCHING).
	*/
	#ifndef NRF_802154_COUNTER_TIMER_INSTANCE
	#define NRF_802154_COUNTER_TIMER_INSTANCE NRF_TIMER2
	#endif

	/**
	* @def NRF_802154_SWI_EGU_INSTANCE
	*
	* The SWI EGU instance used by the driver to synchronize PPIs and for requests and notifications if
	* SWI is in use.
	*
	* @note This option is used by the core module regardless of the driver configuration.
	*
	*/
	#ifndef NRF_802154_SWI_EGU_INSTANCE

	#ifdef NRF52811_XXAA
	#define NRF_802154_SWI_EGU_INSTANCE NRF_EGU0
	#else
	#define NRF_802154_SWI_EGU_INSTANCE NRF_EGU3
	#endif

	#endif

	/**
	* @def NRF_802154_SWI_IRQ_HANDLER
	*
	* The SWI EGU IRQ handler used by the driver for requests and notifications if SWI is in use.
	*
	* @note This option is used when the driver uses SWI to process requests and notifications.
	*
	*/
	#ifndef NRF_802154_SWI_IRQ_HANDLER
	#define NRF_802154_SWI_IRQ_HANDLER SWI3_EGU3_IRQHandler
	#endif

	/**
	* @def NRF_802154_SWI_IRQN
	*
	* The SWI EGU IRQ number used by the driver for requests and notifications if SWI is in use.
	*
	* @note This option is used when the driver uses SWI to process requests and notifications.
	*
	*/
	#ifndef NRF_802154_SWI_IRQN
	#define NRF_802154_SWI_IRQN SWI3_EGU3_IRQn
	#endif

	/**
	* @def NRF_802154_SWI_PRIORITY
	*
	* The priority of software interrupt used for requests and notifications.
	*
	*/
	#ifndef NRF_802154_SWI_PRIORITY
	#define NRF_802154_SWI_PRIORITY 5
	#endif

	/**
	* @def NRF_802154_USE_RAW_API
	*
	* When this flag is set, the RAW API is available for the MAC layer. It is recommended to use
	* the RAW API because it provides more optimized functions.
	*
	* @note If the RAW API is not available for the MAC layer, only less optimized functions performing
	* copy are available.
	*
	*/
	#ifndef NRF_802154_USE_RAW_API
	#define NRF_802154_USE_RAW_API 1
	#endif

	/**
	* @def NRF_802154_PENDING_SHORT_ADDRESSES
	*
	* The number of slots containing short addresses of nodes for which the pending data is stored.
	*
	*/
	#ifndef NRF_802154_PENDING_SHORT_ADDRESSES
	#define NRF_802154_PENDING_SHORT_ADDRESSES 10
	#endif

	/**
	* @def NRF_802154_PENDING_EXTENDED_ADDRESSES
	*
	* The number of slots containing extended addresses of nodes for which the pending data is stored.
	*
	*/
	#ifndef NRF_802154_PENDING_EXTENDED_ADDRESSES
	#define NRF_802154_PENDING_EXTENDED_ADDRESSES 10
	#endif

	/**
	* @def NRF_802154_RX_BUFFERS
	*
	* The number of buffers in the receive queue.
	*
	*/
	#ifndef NRF_802154_RX_BUFFERS
	#define NRF_802154_RX_BUFFERS 16
	#endif

	/**
	* @def NRF_802154_DISABLE_BCC_MATCHING
	*
	* Setting this flag disables NRF_RADIO_EVENT_BCMATCH handling, and therefore the address filtering
	* during the frame reception. With this flag set to 1, the address filtering is done after
	* receiving a frame, during NRF_RADIO_EVENT_END handling.
	*
	*/
	#ifndef NRF_802154_DISABLE_BCC_MATCHING
	#define NRF_802154_DISABLE_BCC_MATCHING 0
	#endif

	/**
	* @def NRF_802154_NOTIFY_CRCERROR
	*
	* With this flag set to 1, the CRC errors are notified to upper layers. This requires an interrupt
	* handler to be used.
	*
	*/
	#ifndef NRF_802154_NOTIFY_CRCERROR
	#define NRF_802154_NOTIFY_CRCERROR 1
	#endif

	/**
	* @def NRF_802154_FRAME_TIMESTAMP_ENABLED
	*
	* If timestamps are to be added to the frames received.
	* Enabling this feature enables the functions @ref nrf_802154_received_timsestamp_raw,
	* @ref nrf_802154_received_timestamp, @ref nrf_802154_transmitted_timestamp_raw, and
	* @ref nrf_802154_transmitted_timestamp, which add timestamps to the frames received.
	*
	*/
	#ifndef NRF_802154_FRAME_TIMESTAMP_ENABLED
	#define NRF_802154_FRAME_TIMESTAMP_ENABLED 1
	#endif

	/**
	* @def NRF_802154_DELAYED_TRX_ENABLED
	*
	* If the delayed transmission and the receive window features are available.
	*
	*/
	#ifndef NRF_802154_DELAYED_TRX_ENABLED
	#define NRF_802154_DELAYED_TRX_ENABLED 1
	#endif

	/**
	* @}
	* @defgroup nrf_802154_config_clock Clock driver configuration
	* @{
	*/

	/**
	* @def NRF_802154_CLOCK_IRQ_PRIORITY
	*
	* The priority of clock interrupt used in the standalone clock driver implementation.
	*
	* @note This configuration is only applicable for the Clock Abstraction Layer implementation
	* in nrf_802154_clock_nodrv.c.
	*
	*/
	#ifndef NRF_802154_CLOCK_IRQ_PRIORITY
	#define NRF_802154_CLOCK_IRQ_PRIORITY 7
	#endif

	/**
	* @def NRF_802154_CLOCK_LFCLK_SOURCE
	*
	* The low-frequency clock source used in the standalone clock driver implementation.
	*
	* @note This configuration is only applicable for the Clock Abstraction Layer implementation
	* in nrf_802154_clock_nodrv.c.
	*
	*/
	#ifndef NRF_802154_CLOCK_LFCLK_SOURCE
	#define NRF_802154_CLOCK_LFCLK_SOURCE NRF_CLOCK_LFCLK_Xtal
	#endif

	/**
	* @}
	* @defgroup nrf_802154_config_rtc RTC driver configuration
	* @{
	*/

	/**
	* @def NRF_802154_RTC_IRQ_PRIORITY
	*
	* The priority of RTC interrupt used in the standalone timer driver implementation.
	*
	* @note This configuration is only applicable for the Low Power Timer Abstraction Layer
	* implementation in nrf_802154_lp_timer_nodrv.c.
	*
	*/
	#ifndef NRF_802154_RTC_IRQ_PRIORITY
	#define NRF_802154_RTC_IRQ_PRIORITY 6
	#endif

	/**
	* @def NRF_802154_RTC_INSTANCE
	*
	* The RTC instance used in the standalone timer driver implementation.
	*
	* @note This configuration is only applicable for the Low Power Timer Abstraction Layer
	* implementation in nrf_802154_lp_timer_nodrv.c.
	*
	*/
	#ifndef NRF_802154_RTC_INSTANCE

	#ifdef NRF52811_XXAA
	#define NRF_802154_RTC_INSTANCE NRF_RTC0
	#else
	#define NRF_802154_RTC_INSTANCE NRF_RTC2
	#endif

	#endif

	/**
	* @def NRF_802154_RTC_IRQ_HANDLER
	*
	* The RTC interrupt handler name used in the standalone timer driver implementation.
	*
	* @note This configuration is only applicable for Low Power Timer Abstraction Layer implementation
	* in nrf_802154_lp_timer_nodrv.c.
	*
	*/
	#ifndef NRF_802154_RTC_IRQ_HANDLER

	#ifdef NRF52811_XXAA
	#define NRF_802154_RTC_IRQ_HANDLER RTC0_IRQHandler
	#else
	#define NRF_802154_RTC_IRQ_HANDLER RTC2_IRQHandler
	#endif

	#endif

	/**
	* @def NRF_802154_RTC_IRQN
	*
	* The RTC Interrupt number used in the standalone timer driver implementation.
	*
	* @note This configuration is only applicable for the Low Power Timer Abstraction Layer implementation
	* in nrf_802154_lp_timer_nodrv.c.
	*
	*/
	#ifndef NRF_802154_RTC_IRQN

	#ifdef NRF52811_XXAA
	#define NRF_802154_RTC_IRQN RTC0_IRQn
	#else
	#define NRF_802154_RTC_IRQN RTC2_IRQn
	#endif

	#endif

	/**
	* @}
	* @defgroup nrf_802154_config_csma CSMA/CA procedure configuration
	* @{
	*/

	/**
	* @def NRF_802154_CSMA_CA_ENABLED
	*
	* If CSMA-CA is to be enabled by the driver. Disabling CSMA-CA improves
	* the driver performance.
	*
	*/
	#ifndef NRF_802154_CSMA_CA_ENABLED
	#define NRF_802154_CSMA_CA_ENABLED 1
	#endif

	/**
	* @def NRF_802154_CSMA_CA_MIN_BE
	*
	* The minimum value of the backoff exponent (BE) in the CSMA-CA algorithm
	* (see IEEE 802.15.4-2015: 6.2.5.1).
	*
	*/
	#ifndef NRF_802154_CSMA_CA_MIN_BE
	#define NRF_802154_CSMA_CA_MIN_BE 3
	#endif

	/**
	* @def NRF_802154_CSMA_CA_MAX_BE
	*
	* The maximum value of the backoff exponent, BE, in the CSMA-CA algorithm
	* (see IEEE 802.15.4-2015: 6.2.5.1).
	*
	*/
	#ifndef NRF_802154_CSMA_CA_MAX_BE
	#define NRF_802154_CSMA_CA_MAX_BE 5
	#endif

	/**
	* @def NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS
	*
	* The maximum number of backoffs that the CSMA-CA algorithm will attempt before declaring a channel
	* access failure.
	*
	*/
	#ifndef NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS
	#define NRF_802154_CSMA_CA_MAX_CSMA_BACKOFFS 4
	#endif

	/**
	* @def NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT
	*
	* Indicates whether the CSMA-CA algorithm waits for an available timeslot before it performs
	* the CCA procedure.
	*
	* @note When this option is enabled, the CSMA-CA procedure can be synchronized with timeslots of
	* other protocols. This decreases the robustness of the CSMA-CA procedure. On the other hand,
	* enabling this function increases the performance of multi-protocol applications, especially
	* when protocols other than 802.15.4 use much of the radio time (like the BLE scanning
	* operation).
	*
	*/
	#ifndef NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT
	#define NRF_802154_CSMA_CA_WAIT_FOR_TIMESLOT 1
	#endif

	/**
	* @}
	* @defgroup nrf_802154_config_timeout ACK timeout feature configuration
	* @{
	*/

	/**
	* @def NRF_802154_ACK_TIMEOUT_ENABLED
	*
	* Indicates whether the ACK timeout feature is to be enabled in the driver.
	*
	*/
	#ifndef NRF_802154_ACK_TIMEOUT_ENABLED
	#define NRF_802154_ACK_TIMEOUT_ENABLED 1
	#endif

	/**
	* @def NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT
	*
	* The default timeout in microseconds (us) for the ACK timeout feature.
	*
	*/
	#ifndef NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT
	#define NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT 7000
	#endif

	/**
	* @def NRF_802154_ACK_TIMEOUT_DEFAULT_TIMEOUT
	*
	* The default timeout in microseconds (us) for the precise ACK timeout feature.
	*
	*/
	#ifndef NRF_802154_PRECISE_ACK_TIMEOUT_DEFAULT_TIMEOUT
	#define NRF_802154_PRECISE_ACK_TIMEOUT_DEFAULT_TIMEOUT 210
	#endif

	/**
	* @def NRF_802154_MAX_ACK_IE_SIZE
	*
	* The maximum supported size of the 802.15.4-2015 IE header and content fields in an Enh-Ack.
	*
	*/
	#ifndef NRF_802154_MAX_ACK_IE_SIZE
	#define NRF_802154_MAX_ACK_IE_SIZE 8
	#endif

	/**
	* @}
	* @defgroup nrf_802154_config_transmission Transmission start notification feature configuration
	* @{
	*/

	/**
	* @def NRF_802154_TX_STARTED_NOTIFY_ENABLED
	*
	* Indicates whether the notifications of the started transmissions are to be enabled in the driver.
	*
	* @note This feature is enabled by default if the ACK timeout feature or CSMA-CA is enabled.
	* These features depend on the notifications of the transmission start.
	*/
	#ifndef NRF_802154_TX_STARTED_NOTIFY_ENABLED
	#if NRF_802154_ACK_TIMEOUT_ENABLED \|\| NRF_802154_CSMA_CA_ENABLED
	#define NRF_802154_TX_STARTED_NOTIFY_ENABLED 1
	#else
	#define NRF_802154_TX_STARTED_NOTIFY_ENABLED 0
	#endif
	#endif // NRF_802154_TX_STARTED_NOTIFY_ENABLED

	/**
	*@}
	**/

	#ifdef __cplusplus
	}
	#endif

	#endif // NRF_802154_CONFIG_H__

	/**
	*@}
	**/