.github/workflows/posix.yml

#
#  Copyright (c) 2020, The OpenThread Authors.
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#  3. Neither the name of the copyright holder nor the
#     names of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
#  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
#  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
#  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
#  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.
#

name: POSIX

on: [push, pull_request]

jobs:

  cancel-previous-runs:
    runs-on: ubuntu-20.04
    steps:
    - uses: rokroskar/workflow-run-cleanup-action@master
      env:
        GITHUB_TOKEN: "${{ secrets.GITHUB_TOKEN }}"
      if: "github.ref != 'refs/heads/master'"


  posix-cli:
    runs-on: ubuntu-20.04
    env:
      COVERAGE: 1
      PYTHONUNBUFFERED: 1
      READLINE: readline
      REFERENCE_DEVICE: 1
      VIRTUAL_TIME: 1
      VIRTUAL_TIME_UART: 1
    steps:
    - uses: actions/checkout@v2
    - name: Bootstrap
      run: |
        sudo rm /etc/apt/sources.list.d/* && sudo apt-get update
        sudo apt-get --no-install-recommends install -y libreadline6-dev python3-setuptools python3-wheel lcov
        python3 -m pip install -r tests/scripts/thread-cert/requirements.txt
    - name: Build
      run: |
        ./bootstrap
        make -f examples/Makefile-simulation
        make -f src/posix/Makefile-posix
    - name: Run
      run: |
        VERBOSE=1 OT_CLI_PATH="$PWD/output/posix/bin/ot-cli -v" RADIO_DEVICE="$PWD/output/simulation/bin/ot-rcp" make -f src/posix/Makefile-posix check
    - uses: actions/upload-artifact@v2
      if: ${{ failure() }}
      with:
        name: posix-cli-thread-cert
        path: build/posix/tests/scripts/thread-cert
    - name: Generate Coverage
      run: |
        ./script/test generate_coverage gcc
    - uses: actions/upload-artifact@v2
      with:
        name: cov-posix-cli
        path: tmp/coverage.info

  posix-ncp:
    runs-on: ubuntu-20.04
    env:
      COVERAGE: 1
      NODE_TYPE: ncp-sim
      PYTHONUNBUFFERED: 1
      READLINE: readline
      REFERENCE_DEVICE: 1
      VIRTUAL_TIME: 1
      VIRTUAL_TIME_UART: 1
    steps:
    - uses: actions/checkout@v2
    - name: Bootstrap
      run: |
        sudo rm /etc/apt/sources.list.d/* && sudo apt-get update
        sudo apt-get --no-install-recommends install -y libreadline6-dev python3-setuptools python3-wheel lcov
        python3 -m pip install -r tests/scripts/thread-cert/requirements.txt
        sudo python3 -m pip install git+https://github.com/openthread/pyspinel
    - name: Build
      run: |
        ./bootstrap
        make -f examples/Makefile-simulation
        make -f src/posix/Makefile-posix
    - name: Run
      run: |
        VERBOSE=1 OT_NCP_PATH="$PWD/output/posix/bin/ot-ncp" RADIO_DEVICE="$PWD/output/simulation/bin/ot-rcp" make -f src/posix/Makefile-posix check
    - uses: actions/upload-artifact@v2
      if: ${{ failure() }}
      with:
        name: posix-ncp-thread-cert
        path: build/posix/tests/scripts/thread-cert
    - name: Generate Coverage
      run: |
        ./script/test generate_coverage gcc
    - uses: actions/upload-artifact@v2
      with:
        name: cov-posix-ncp
        path: tmp/coverage.info

  posix-ncp-rcp-migrate:
    runs-on: ubuntu-20.04
    env:
      COVERAGE: 1
    steps:
    - uses: actions/checkout@v2
    - name: Bootstrap
      run: |
        sudo rm /etc/apt/sources.list.d/* && sudo apt-get update
        sudo apt-get --no-install-recommends install -y expect lcov
    - name: Build
      run: |
        ./bootstrap
        script/check-ncp-rcp-migrate build
    - name: Run
      run: |
        script/check-ncp-rcp-migrate check
    - name: Generate Coverage
      run: |
        ./script/test generate_coverage gcc
    - uses: actions/upload-artifact@v2
      with:
        name: cov-posix-ncp-rcp-migrate
        path: tmp/coverage.info

  posix-pty:
    runs-on: ubuntu-20.04
    env:
      COVERAGE: 1
    steps:
    - uses: actions/checkout@v2
    - name: Bootstrap
      run: |
        sudo rm /etc/apt/sources.list.d/* && sudo apt-get update
        sudo apt-get --no-install-recommends install -y socat expect lcov net-tools
        cd /tmp
        wget https://github.com/obgm/libcoap/archive/bsd-licensed.tar.gz
        tar xvf bsd-licensed.tar.gz
        cd libcoap-bsd-licensed
        ./autogen.sh
        ./configure --prefix= --exec-prefix=/usr --with-boost=internal --disable-tests --disable-documentation
        make -j2
        sudo make install
    - name: Build
      run: |
        ./bootstrap
        script/check-posix-pty build
    - name: Run
      run: |
        script/check-posix-pty check
    - name: Generate Coverage
      run: |
        ./script/test generate_coverage gcc
    - uses: actions/upload-artifact@v2
      with:
        name: cov-posix-pty
        path: tmp/coverage.info

  posix-pty-daemon:
    runs-on: ubuntu-20.04
    env:
      COVERAGE: 1
      DAEMON: 1
    steps:
    - uses: actions/checkout@v2
    - name: Bootstrap
      run: |
        sudo rm /etc/apt/sources.list.d/* && sudo apt-get update
        sudo apt-get --no-install-recommends install -y socat expect lcov net-tools
        cd /tmp
        wget https://github.com/obgm/libcoap/archive/bsd-licensed.tar.gz
        tar xvf bsd-licensed.tar.gz
        cd libcoap-bsd-licensed
        ./autogen.sh
        ./configure --prefix= --exec-prefix=/usr --with-boost=internal --disable-tests --disable-documentation
        make -j2
        sudo make install
    - name: Build
      run: |
        ./bootstrap
        script/check-posix-pty build
    - name: Run
      run: |
        script/check-posix-pty check
    - name: Generate Coverage
      run: |
        ./script/test generate_coverage gcc
    - uses: actions/upload-artifact@v2
      with:
        name: cov-posix-pty-daemon
        path: tmp/coverage.info

  upload-coverage:
    needs:
    - posix-cli
    - posix-ncp
    - posix-ncp-rcp-migrate
    - posix-pty
    - posix-pty-daemon
    runs-on: ubuntu-20.04
    steps:
    - uses: actions/checkout@v2
    - name: Bootstrap
      run: |
        sudo apt-get --no-install-recommends install -y lcov
    - uses: actions/download-artifact@v2
      with:
        path: coverage/
    - name: Upload Coverage
      run: |
        script/test upload_codecov

  delete-coverage-artifacts:
    needs: upload-coverage
    if: always()
    runs-on: ubuntu-20.04
    steps:
    - uses: geekyeggo/delete-artifact@1-glob-support
      with:
        name: cov-*
        useGlob: true