| /** |
| * Copyright (c) 2013 - 2019, Nordic Semiconductor ASA |
| * |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form, except as embedded into a Nordic |
| * Semiconductor ASA integrated circuit in a product or a software update for |
| * such product, must reproduce the above copyright notice, this list of |
| * conditions and the following disclaimer in the documentation and/or other |
| * materials provided with the distribution. |
| * |
| * 3. Neither the name of Nordic Semiconductor ASA nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * 4. This software, with or without modification, must only be used with a |
| * Nordic Semiconductor ASA integrated circuit. |
| * |
| * 5. Any software provided in binary form under this license must not be reverse |
| * engineered, decompiled, modified and/or disassembled. |
| * |
| * THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS |
| * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE |
| * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT |
| * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| /**@file |
| * |
| * @defgroup sdk_error SDK Error codes |
| * @{ |
| * @ingroup app_common |
| * @{ |
| * @details Error codes are 32-bit unsigned integers with the most significant 16-bit reserved for |
| * identifying the module where the error occurred while the least least significant LSB |
| * are used to provide the cause or nature of error. Each module is assigned a 16-bit |
| * unsigned integer. Which it will use to identify all errors that occurred in it. 16-bit |
| * LSB range is with module id as the MSB in the 32-bit error code is reserved for the |
| * module. As an example, if 0x8800 identifies a certain SDK module, all values from |
| * 0x88000000 - 0x8800FFFF are reserved for this module. |
| * It should be noted that common error reasons have been assigned values to make it |
| * possible to decode error reason easily. As an example, lets module uninitialized has |
| * been assigned an error code 0x000A0. Then, if application encounters an error code |
| * 0xZZZZ00A0, it knows that it accessing a certain module without initializing it. |
| * Apart from this, each module is allowed to define error codes that are not covered by |
| * the common ones, however, these values are defined in a range that does not conflict |
| * with common error values. For module, specific error however, it is possible that the |
| * same error value is used by two different modules to indicated errors of very different |
| * nature. If error is already defined by the NRF common error codes, these are reused. |
| * A range is reserved for application as well, it can use this range for defining |
| * application specific errors. |
| * |
| * @note Success code, NRF_SUCCESS, does not include any module identifier. |
| |
| */ |
| |
| #ifndef SDK_ERRORS_H__ |
| #define SDK_ERRORS_H__ |
| |
| #include <stdint.h> |
| #include "nrf_error.h" |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * @defgroup sdk_err_base Base defined for SDK Modules |
| * @{ |
| */ |
| #define NRF_ERROR_SDK_ERROR_BASE (NRF_ERROR_BASE_NUM + 0x8000) /**< Base value defined for SDK module identifiers. */ |
| #define NRF_ERROR_SDK_COMMON_ERROR_BASE (NRF_ERROR_BASE_NUM + 0x0080) /**< Base error value to be used for SDK error values. */ |
| /** @} */ |
| |
| /** |
| * @defgroup sdk_module_codes Codes reserved as identification for module where the error occurred. |
| * @{ |
| */ |
| #define NRF_ERROR_MEMORY_MANAGER_ERR_BASE (0x8100) /**< Base address for Memory Manager related errors. */ |
| #define NRF_ERROR_PERIPH_DRIVERS_ERR_BASE (0x8200) /**< Base address for Peripheral drivers related errors. */ |
| #define NRF_ERROR_GAZELLE_ERR_BASE (0x8300) /**< Base address for Gazelle related errors. */ |
| #define NRF_ERROR_BLE_IPSP_ERR_BASE (0x8400) /**< Base address for BLE IPSP related errors. */ |
| #define NRF_ERROR_CRYPTO_ERR_BASE (0x8500) /**< Base address for crypto related errors. */ |
| #define NRF_ERROR_FDS_ERR_BASE (0x8600) /**< Base address for FDS related errors. */ |
| /** @} */ |
| |
| |
| /** |
| * @defgroup sdk_iot_errors Codes reserved as identification for IoT errors. |
| * @{ |
| */ |
| #define NRF_ERROR_IOT_ERR_BASE_START (0xA000) |
| #define NRF_ERROR_IOT_ERR_BASE_STOP (0xAFFF) |
| /** @} */ |
| |
| |
| /** |
| * @defgroup sdk_common_errors Codes reserved as identification for common errors. |
| * @{ |
| */ |
| #define NRF_ERROR_MODULE_NOT_INITIALIZED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0000) ///< Module not initialized |
| #define NRF_ERROR_MUTEX_INIT_FAILED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0001) ///< Mutex initialization failed |
| #define NRF_ERROR_MUTEX_LOCK_FAILED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0002) ///< Mutex lock failed |
| #define NRF_ERROR_MUTEX_UNLOCK_FAILED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0003) ///< Mutex unlock failed |
| #define NRF_ERROR_MUTEX_COND_INIT_FAILED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0004) ///< Mutex conditional initialization failed |
| #define NRF_ERROR_MODULE_ALREADY_INITIALIZED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0005) ///< Module already initialized |
| #define NRF_ERROR_STORAGE_FULL (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0006) ///< Storage full |
| #define NRF_ERROR_API_NOT_IMPLEMENTED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0010) ///< API not implemented |
| #define NRF_ERROR_FEATURE_NOT_ENABLED (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0011) ///< Feature not enabled |
| #define NRF_ERROR_IO_PENDING (NRF_ERROR_SDK_COMMON_ERROR_BASE + 0x0012) ///< Input/Output pending |
| /** @} */ |
| |
| |
| /** |
| * @defgroup drv_specific_errors Error / status codes specific to drivers. |
| * @{ |
| */ |
| #define NRF_ERROR_DRV_TWI_ERR_OVERRUN (NRF_ERROR_PERIPH_DRIVERS_ERR_BASE + 0x0000) |
| #define NRF_ERROR_DRV_TWI_ERR_ANACK (NRF_ERROR_PERIPH_DRIVERS_ERR_BASE + 0x0001) |
| #define NRF_ERROR_DRV_TWI_ERR_DNACK (NRF_ERROR_PERIPH_DRIVERS_ERR_BASE + 0x0002) |
| /** @} */ |
| |
| |
| /** |
| * @defgroup ble_ipsp_errors IPSP codes |
| * @brief Error and status codes specific to IPSP. |
| * @{ |
| */ |
| #define NRF_ERROR_BLE_IPSP_RX_PKT_TRUNCATED (NRF_ERROR_BLE_IPSP_ERR_BASE + 0x0000) |
| #define NRF_ERROR_BLE_IPSP_CHANNEL_ALREADY_EXISTS (NRF_ERROR_BLE_IPSP_ERR_BASE + 0x0001) |
| #define NRF_ERROR_BLE_IPSP_LINK_DISCONNECTED (NRF_ERROR_BLE_IPSP_ERR_BASE + 0x0002) |
| #define NRF_ERROR_BLE_IPSP_PEER_REJECTED (NRF_ERROR_BLE_IPSP_ERR_BASE + 0x0003) |
| /* @} */ |
| |
| |
| /** |
| * @brief API Result. |
| * |
| * @details Indicates success or failure of an API procedure. In case of failure, a comprehensive |
| * error code indicating cause or reason for failure is provided. |
| * |
| * Though called an API result, it could used in Asynchronous notifications callback along |
| * with asynchronous callback as event result. This mechanism is employed when an event |
| * marks the end of procedure initiated using API. API result, in this case, will only be |
| * an indicative of whether the procedure has been requested successfully. |
| */ |
| typedef uint32_t ret_code_t; |
| |
| /** @} */ |
| /** @} */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // SDK_ERRORS_H__ |