| /* |
| * Copyright (c) 2016, The OpenThread Authors. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the copyright holder nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * This file includes miscellaneous compile-time configuration constants for OpenThread. |
| */ |
| |
| #ifndef CONFIG_MISC_H_ |
| #define CONFIG_MISC_H_ |
| |
| #include "config/coap.h" |
| #include "config/srp_server.h" |
| |
| /** |
| * @def OPENTHREAD_CONFIG_STACK_VENDOR_OUI |
| * |
| * The Organizationally Unique Identifier for the Thread stack. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_STACK_VENDOR_OUI |
| #define OPENTHREAD_CONFIG_STACK_VENDOR_OUI 0x18b430 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_STACK_VERSION_REV |
| * |
| * The Stack Version Revision for the Thread stack. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_STACK_VERSION_REV |
| #define OPENTHREAD_CONFIG_STACK_VERSION_REV 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_STACK_VERSION_MAJOR |
| * |
| * The Stack Version Major for the Thread stack. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_STACK_VERSION_MAJOR |
| #define OPENTHREAD_CONFIG_STACK_VERSION_MAJOR 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_STACK_VERSION_MINOR |
| * |
| * The Stack Version Minor for the Thread stack. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_STACK_VERSION_MINOR |
| #define OPENTHREAD_CONFIG_STACK_VERSION_MINOR 1 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_ECDSA_ENABLE |
| * |
| * Define to 1 to enable ECDSA support. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_ECDSA_ENABLE |
| #define OPENTHREAD_CONFIG_ECDSA_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_UPTIME_ENABLE |
| * |
| * Define to 1 to enable tracking the uptime of OpenThread instance. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_UPTIME_ENABLE |
| #define OPENTHREAD_CONFIG_UPTIME_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE |
| * |
| * Define to 1 to enable the Jam Detection service. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE |
| #define OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_MULTIPLE_INSTANCE_ENABLE |
| * |
| * Define to 1 to enable multiple instance support. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_MULTIPLE_INSTANCE_ENABLE |
| #define OPENTHREAD_CONFIG_MULTIPLE_INSTANCE_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE |
| * |
| * Define to 1 to enable Thread Test Harness reference device support. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE |
| #define OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_UDP_FORWARD_ENABLE |
| * |
| * Define to 1 to enable UDP forward support. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_UDP_FORWARD_ENABLE |
| #define OPENTHREAD_CONFIG_UDP_FORWARD_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE |
| * |
| * Whether use heap allocator for message buffers. |
| * |
| * @note If this is set, OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS is ignored. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE |
| #define OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS |
| * |
| * The number of message buffers in the buffer pool. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS |
| #define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS 44 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_MESSAGE_BUFFER_SIZE |
| * |
| * The size of a message buffer in bytes. |
| * |
| * Message buffers store pointers which have different sizes on different |
| * system. Setting message buffer size according to the CPU word length |
| * so that message buffer size will be doubled on 64bit system compared |
| * to that on 32bit system. As a result, the first message always have some |
| * bytes left for small packets. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_MESSAGE_BUFFER_SIZE |
| #define OPENTHREAD_CONFIG_MESSAGE_BUFFER_SIZE (sizeof(void *) * 32) |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DEFAULT_TRANSMIT_POWER |
| * |
| * The default IEEE 802.15.4 transmit power (dBm). |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DEFAULT_TRANSMIT_POWER |
| #define OPENTHREAD_CONFIG_DEFAULT_TRANSMIT_POWER 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DROP_MESSAGE_ON_FRAGMENT_TX_FAILURE |
| * |
| * Define as 1 for OpenThread to drop a message (and not send any remaining fragments of the message) if all transmit |
| * attempts fail for a fragment of the message. For a direct transmission, a failure occurs after all MAC transmission |
| * attempts for a given fragment are unsuccessful. For an indirect transmission, a failure occurs after all data poll |
| * triggered transmission attempts for a given fragment fail. |
| * |
| * If set to zero (disabled), OpenThread will attempt to send subsequent fragments, whether or not all transmission |
| * attempts fail for a given fragment. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DROP_MESSAGE_ON_FRAGMENT_TX_FAILURE |
| #define OPENTHREAD_CONFIG_DROP_MESSAGE_ON_FRAGMENT_TX_FAILURE 1 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_6LOWPAN_REASSEMBLY_TIMEOUT |
| * |
| * The reassembly timeout between 6LoWPAN fragments in seconds. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_6LOWPAN_REASSEMBLY_TIMEOUT |
| #define OPENTHREAD_CONFIG_6LOWPAN_REASSEMBLY_TIMEOUT 2 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_JOINER_UDP_PORT |
| * |
| * The default Joiner UDP port. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_JOINER_UDP_PORT |
| #define OPENTHREAD_CONFIG_JOINER_UDP_PORT 1000 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS |
| * |
| * The maximum number of state-changed callback handlers (set using `otSetStateChangedCallback()`). |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS |
| #define OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS 1 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_STORE_FRAME_COUNTER_AHEAD |
| * |
| * The value ahead of the current frame counter for persistent storage. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_STORE_FRAME_COUNTER_AHEAD |
| #define OPENTHREAD_CONFIG_STORE_FRAME_COUNTER_AHEAD 1000 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS |
| * |
| * Define as 1 to enable bultin-mbedtls. |
| * |
| * Note that the OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS determines whether to use bultin-mbedtls as well as |
| * whether to manage mbedTLS internally, such as memory allocation and debug. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS |
| #define OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS 1 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS_MANAGEMENT |
| * |
| * Define as 1 to enable bultin mbedtls management. |
| * |
| * OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS_MANAGEMENT determines whether to manage mbedTLS memory |
| * allocation and debug config internally. If not configured, the default is to enable builtin |
| * management if builtin mbedtls is enabled and disable it otherwise. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS_MANAGEMENT |
| #define OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS_MANAGEMENT OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE |
| * |
| * The size of heap buffer when DTLS is enabled. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE |
| #if OPENTHREAD_CONFIG_SRP_SERVER_ENABLE |
| // Internal heap doesn't support size larger than 64K bytes. |
| #define OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE (63 * 1024) |
| #elif OPENTHREAD_CONFIG_COAP_SECURE_API_ENABLE |
| #define OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE (3136 * sizeof(void *)) |
| #else |
| #define OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE (1616 * sizeof(void *)) |
| #endif |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE_NO_DTLS |
| * |
| * The size of heap buffer when DTLS is disabled. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE_NO_DTLS |
| #if OPENTHREAD_CONFIG_SRP_SERVER_ENABLE |
| // Internal heap doesn't support size larger than 64K bytes. |
| #define OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE_NO_DTLS (63 * 1024) |
| #elif OPENTHREAD_CONFIG_ECDSA_ENABLE |
| #define OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE_NO_DTLS 2600 |
| #else |
| #define OPENTHREAD_CONFIG_HEAP_INTERNAL_SIZE_NO_DTLS 384 |
| #endif |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE |
| * |
| * Enable the external heap. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE |
| #define OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DTLS_APPLICATION_DATA_MAX_LENGTH |
| * |
| * The size of dtls application data when the CoAP Secure API is enabled. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DTLS_APPLICATION_DATA_MAX_LENGTH |
| #define OPENTHREAD_CONFIG_DTLS_APPLICATION_DATA_MAX_LENGTH 1400 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_ASSERT_ENABLE |
| * |
| * Define as 1 to enable assert function `OT_ASSERT()` within OpenThread code and its libraries. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_ASSERT_ENABLE |
| #define OPENTHREAD_CONFIG_ASSERT_ENABLE 1 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_ENABLE_DEBUG_UART |
| * |
| * Enable the "Debug Uart" platform feature. |
| * |
| * In the embedded world, the CLI application uses a UART as a console |
| * and the NCP application can be configured to use either a UART or |
| * a SPI type device to transfer data to the host. |
| * |
| * The Debug UART is or requires a second uart on the platform. |
| * |
| * The Debug Uart has two uses: |
| * |
| * Use #1 - for random 'debug printf' type messages a developer may need |
| * Use #2 (selected via DEBUG_LOG_OUTPUT) is a log output. |
| * |
| * See #include <openthread/platform/debug_uart.h> for more details |
| */ |
| #ifndef OPENTHREAD_CONFIG_ENABLE_DEBUG_UART |
| #define OPENTHREAD_CONFIG_ENABLE_DEBUG_UART 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_POSIX_SETTINGS_PATH |
| * |
| * The settings storage path on posix platform. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_POSIX_SETTINGS_PATH |
| #define OPENTHREAD_CONFIG_POSIX_SETTINGS_PATH "tmp" |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE |
| * |
| * Define to 1 to enable otPlatFlash* APIs to support non-volatile storage. |
| * |
| * When defined to 1, the platform MUST implement the otPlatFlash* APIs instead of the otPlatSettings* APIs. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE |
| #define OPENTHREAD_CONFIG_PLATFORM_FLASH_API_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_FAILED_CHILD_TRANSMISSIONS |
| * |
| * This setting configures the number of consecutive MCPS.DATA-Confirms having Status NO_ACK |
| * that cause a Child-to-Parent link to be considered broken. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_FAILED_CHILD_TRANSMISSIONS |
| #define OPENTHREAD_CONFIG_FAILED_CHILD_TRANSMISSIONS 4 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DEFAULT_SED_BUFFER_SIZE |
| * |
| * This setting configures the default buffer size for IPv6 datagram destined for an attached SED. |
| * A Thread Router MUST be able to buffer at least one 1280-octet IPv6 datagram for an attached SED according to |
| * the Thread Conformance Specification. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DEFAULT_SED_BUFFER_SIZE |
| #define OPENTHREAD_CONFIG_DEFAULT_SED_BUFFER_SIZE 1280 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DEFAULT_SED_DATAGRAM_COUNT |
| * |
| * This setting configures the default datagram count of 106-octet IPv6 datagram per attached SED. |
| * A Thread Router MUST be able to buffer at least one 106-octet IPv6 datagram per attached SED according to |
| * the Thread Conformance Specification. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DEFAULT_SED_DATAGRAM_COUNT |
| #define OPENTHREAD_CONFIG_DEFAULT_SED_DATAGRAM_COUNT 1 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_NUM_FRAGMENT_PRIORITY_ENTRIES |
| * |
| * The number of fragment priority entries. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_NUM_FRAGMENT_PRIORITY_ENTRIES |
| #define OPENTHREAD_CONFIG_NUM_FRAGMENT_PRIORITY_ENTRIES 8 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_PLATFORM_RADIO_PROPRIETARY_SUPPORT |
| * |
| * Define to 1 to support proprietary radio configurations defined by platform. |
| * |
| * @note If this setting is set to 1, the channel range is defined by the platform. Choosing this option requires |
| * the following configuration options to be defined by Platform: |
| * OPENTHREAD_CONFIG_PLATFORM_RADIO_PROPRIETARY_CHANNEL_PAGE, |
| * OPENTHREAD_CONFIG_PLATFORM_RADIO_PROPRIETARY_CHANNEL_MIN, |
| * OPENTHREAD_CONFIG_PLATFORM_RADIO_PROPRIETARY_CHANNEL_MAX and, |
| * OPENTHREAD_CONFIG_PLATFORM_RADIO_PROPRIETARY_CHANNEL_MASK. |
| * |
| * @def OPENTHREAD_CONFIG_RADIO_915MHZ_OQPSK_SUPPORT |
| * |
| * Define to 1 to support OQPSK modulation in 915MHz frequency band. The physical layer parameters are defined in |
| * section 6 of IEEE802.15.4-2006. |
| * |
| * @note If this setting is set to 1, the IEEE 802.15.4 channel range is 1 to 10. |
| * |
| * @def OPENTHREAD_CONFIG_RADIO_2P4GHZ_OQPSK_SUPPORT |
| * |
| * Define to 1 to support OQPSK modulation in 2.4GHz frequency band. The physical layer parameters are defined in |
| * section 6 of IEEE802.15.4-2006. |
| * |
| * @note If this settings is set to 1, the IEEE 802.15.4 channel range is 11 to 26. |
| * |
| * @note At least one of these settings must be set to 1. The platform must support the modulation and frequency |
| * band configured by the setting. |
| */ |
| #ifndef OPENTHREAD_CONFIG_PLATFORM_RADIO_PROPRIETARY_SUPPORT |
| #ifndef OPENTHREAD_CONFIG_RADIO_915MHZ_OQPSK_SUPPORT |
| #ifndef OPENTHREAD_CONFIG_RADIO_2P4GHZ_OQPSK_SUPPORT |
| #define OPENTHREAD_CONFIG_PLATFORM_RADIO_PROPRIETARY_SUPPORT 0 |
| #define OPENTHREAD_CONFIG_RADIO_915MHZ_OQPSK_SUPPORT 0 |
| #define OPENTHREAD_CONFIG_RADIO_2P4GHZ_OQPSK_SUPPORT 1 |
| #endif |
| #endif |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DEFAULT_CHANNEL |
| * |
| * The default IEEE 802.15.4 channel. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DEFAULT_CHANNEL |
| #if OPENTHREAD_CONFIG_RADIO_2P4GHZ_OQPSK_SUPPORT |
| #define OPENTHREAD_CONFIG_DEFAULT_CHANNEL 11 |
| #else |
| #if OPENTHREAD_CONFIG_RADIO_915MHZ_OQPSK_SUPPORT |
| #define OPENTHREAD_CONFIG_DEFAULT_CHANNEL 1 |
| #endif // OPENTHREAD_CONFIG_RADIO_915MHZ_OQPSK_SUPPORT |
| #endif // OPENTHREAD_CONFIG_RADIO_2P4GHZ_OQPSK_SUPPORT |
| #endif // OPENTHREAD_CONFIG_DEFAULT_CHANNEL |
| |
| /** |
| * @def OPENTHREAD_CONFIG_LEGACY_ENABLE |
| * |
| * Define to 1 to enable legacy network support. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_LEGACY_ENABLE |
| #define OPENTHREAD_CONFIG_LEGACY_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_OTNS_ENABLE |
| * |
| * Define to 1 to enable OTNS interactions. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_OTNS_ENABLE |
| #define OPENTHREAD_CONFIG_OTNS_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_DUA_ENABLE |
| * |
| * Define as 1 to support Thread 1.2 Domain Unicast Address feature. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_DUA_ENABLE |
| #define OPENTHREAD_CONFIG_DUA_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_MLR_ENABLE |
| * |
| * Define as 1 to support Thread 1.2 Multicast Listener Registration feature. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_MLR_ENABLE |
| #define OPENTHREAD_CONFIG_MLR_ENABLE 0 |
| #endif |
| |
| /** |
| * @def OPENTHREAD_CONFIG_NEIGHBOR_DISCOVERY_AGENT_ENABLE |
| * |
| * Define as 1 to enable support for Neighbor Discover Agent. |
| * |
| */ |
| #ifndef OPENTHREAD_CONFIG_NEIGHBOR_DISCOVERY_AGENT_ENABLE |
| #define OPENTHREAD_CONFIG_NEIGHBOR_DISCOVERY_AGENT_ENABLE 0 |
| #endif |
| |
| #endif // CONFIG_MISC_H_ |