| #!/usr/bin/env python3 |
| # |
| # Copyright (c) 2016, The OpenThread Authors. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of the copyright holder nor the |
| # names of its contributors may be used to endorse or promote products |
| # derived from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| # |
| |
| import unittest |
| |
| import command |
| import config |
| import thread_cert |
| from pktverify.consts import MLE_CHILD_ID_REQUEST, MLE_CHILD_ID_RESPONSE, ADDR_QRY_URI, ADDR_NTF_URI, NL_ML_EID_TLV, NL_RLOC16_TLV, NL_TARGET_EID_TLV, COAP_CODE_POST |
| from pktverify.packet_verifier import PacketVerifier |
| |
| LEADER = 1 |
| ROUTER1 = 2 |
| DUT_ROUTER2 = 3 |
| ROUTER3 = 4 |
| MED1 = 5 |
| MED1_TIMEOUT = 3 |
| |
| # Test Purpose and Description: |
| # ----------------------------- |
| # The purpose of this test case is to validate that the DUT is able to generate |
| # Address Query messages and properly respond with Address Notification messages. |
| # |
| # Test Topology: |
| # ------------- |
| # Router_1 - Leader |
| # / \ |
| # Router_3 - Router_2(DUT) |
| # | |
| # MED |
| # |
| # DUT Types: |
| # ---------- |
| # Router |
| |
| |
| class Cert_5_3_3_AddressQuery(thread_cert.TestCase): |
| USE_MESSAGE_FACTORY = False |
| |
| TOPOLOGY = { |
| LEADER: { |
| 'name': 'LEADER', |
| 'mode': 'rdn', |
| 'allowlist': [ROUTER1, DUT_ROUTER2, ROUTER3] |
| }, |
| ROUTER1: { |
| 'name': 'ROUTER_1', |
| 'mode': 'rdn', |
| 'allowlist': [LEADER] |
| }, |
| DUT_ROUTER2: { |
| 'name': 'ROUTER_2', |
| 'mode': 'rdn', |
| 'allowlist': [LEADER, ROUTER3, MED1] |
| }, |
| ROUTER3: { |
| 'name': 'ROUTER_3', |
| 'mode': 'rdn', |
| 'allowlist': [LEADER, DUT_ROUTER2] |
| }, |
| MED1: { |
| 'name': 'MED', |
| 'is_mtd': True, |
| 'mode': 'rn', |
| 'timeout': 3, |
| 'allowlist': [DUT_ROUTER2] |
| }, |
| } |
| |
| def test(self): |
| # 1 |
| self.nodes[LEADER].start() |
| self.simulator.go(5) |
| self.assertEqual(self.nodes[LEADER].get_state(), 'leader') |
| |
| self.nodes[ROUTER1].start() |
| self.nodes[DUT_ROUTER2].start() |
| self.nodes[ROUTER3].start() |
| self.nodes[MED1].start() |
| self.simulator.go(10) |
| |
| self.assertEqual(self.nodes[ROUTER1].get_state(), 'router') |
| self.assertEqual(self.nodes[DUT_ROUTER2].get_state(), 'router') |
| self.assertEqual(self.nodes[ROUTER3].get_state(), 'router') |
| self.assertEqual(self.nodes[MED1].get_state(), 'child') |
| self.collect_ipaddrs() |
| self.collect_rlocs() |
| self.collect_rloc16s() |
| |
| # 2 |
| router3_mleid = self.nodes[ROUTER3].get_ip6_address(config.ADDRESS_TYPE.ML_EID) |
| self.assertTrue(self.nodes[MED1].ping(router3_mleid)) |
| |
| # 3 |
| # Wait the finish of address resolution traffic triggerred by previous |
| # ping. |
| self.simulator.go(5) |
| |
| med1_mleid = self.nodes[MED1].get_ip6_address(config.ADDRESS_TYPE.ML_EID) |
| self.assertTrue(self.nodes[ROUTER1].ping(med1_mleid)) |
| |
| # 4 |
| # Wait the finish of address resolution traffic triggerred by previous |
| # ping. |
| self.simulator.go(5) |
| |
| self.assertTrue(self.nodes[MED1].ping(router3_mleid)) |
| |
| # 5 |
| # Power off ROUTER3 and wait for leader to expire its Router ID. |
| # In this topology, ROUTER3 has two neighbors (Leader and DUT_ROUTER2), |
| # so the wait time is (MAX_NEIGHBOR_AGE (100s) + worst propagation time (32s * 15) for bad routing +\ |
| # INFINITE_COST_TIMEOUT (90s) + transmission time + extra redundancy), |
| # totally ~700s. |
| self.nodes[ROUTER3].stop() |
| self.simulator.go(700) |
| |
| self.assertFalse(self.nodes[MED1].ping(router3_mleid)) |
| |
| # 6 |
| self.nodes[MED1].stop() |
| self.simulator.go(MED1_TIMEOUT) |
| |
| self.assertFalse(self.nodes[ROUTER1].ping(med1_mleid)) |
| self.assertFalse(self.nodes[ROUTER1].ping(med1_mleid)) |
| |
| def verify(self, pv): |
| pkts = pv.pkts |
| pv.summary.show() |
| |
| LEADER = pv.vars['LEADER'] |
| LEADER_MLEID = pv.vars['LEADER_MLEID'] |
| ROUTER_1 = pv.vars['ROUTER_1'] |
| ROUTER_1_RLOC = pv.vars['ROUTER_1_RLOC'] |
| ROUTER_1_MLEID = pv.vars['ROUTER_1_MLEID'] |
| ROUTER_2 = pv.vars['ROUTER_2'] |
| ROUTER_2_RLOC16 = pv.vars['ROUTER_2_RLOC16'] |
| ROUTER_2_RLOC = pv.vars['ROUTER_2_RLOC'] |
| ROUTER_2_MLEID = pv.vars['ROUTER_2_MLEID'] |
| MED = pv.vars['MED'] |
| MED_RLOC16 = pv.vars['MED_RLOC16'] |
| MED_MLEID = pv.vars['MED_MLEID'] |
| ROUTER_3 = pv.vars['ROUTER_3'] |
| ROUTER_3_MLEID = pv.vars['ROUTER_3_MLEID'] |
| MM = pv.vars['MM_PORT'] |
| |
| # Step 1: Build the topology as described |
| for i in range(1, 4): |
| with pkts.save_index(): |
| pv.verify_attached('ROUTER_%d' % i) |
| pkts.filter_wpan_src64(MED).\ |
| filter_wpan_dst64(ROUTER_2).\ |
| filter_mle_cmd(MLE_CHILD_ID_REQUEST).\ |
| must_next() |
| pkts.filter_wpan_src64(ROUTER_2).\ |
| filter_wpan_dst64(MED).\ |
| filter_mle_cmd(MLE_CHILD_ID_RESPONSE).\ |
| must_next() |
| |
| # Step 2: MED sends an ICMPv6 Echo Request to Router_3 ML-EID |
| # The DUT MUST generate an Address Query Request on MED’s behalf |
| # to find Router_3 address. |
| # The Address Query Request MUST be sent to the Realm-Local |
| # All-Routers address (FF03::2) |
| # CoAP URI-Path |
| # - NON POST coap://<FF03::2> |
| # CoAP Payload |
| # - Target EID TLV |
| # The DUT MUST receive and process the incoming Address Notification |
| # The DUT MUST then forward the ICMPv6 Echo Request from MED and |
| # forward the ICMPv6 Echo Reply to MED |
| |
| _pkt = pkts.filter_ping_request().\ |
| filter_wpan_src64(MED).\ |
| filter_ipv6_dst(ROUTER_3_MLEID).\ |
| must_next() |
| pkts.filter_wpan_src64(ROUTER_2).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI, port=MM).\ |
| filter(lambda p: p.thread_address.tlv.target_eid == ROUTER_3_MLEID).\ |
| must_next() |
| _pkt1 = pkts.filter_wpan_src64(ROUTER_3).\ |
| filter_ipv6_dst(ROUTER_2_RLOC).\ |
| filter_coap_request(ADDR_NTF_URI, port=MM).\ |
| filter(lambda p: { |
| NL_ML_EID_TLV, |
| NL_RLOC16_TLV, |
| NL_TARGET_EID_TLV |
| } == set(p.coap.tlv.type) and\ |
| p.thread_address.tlv.target_eid == ROUTER_3_MLEID and\ |
| p.coap.code == COAP_CODE_POST |
| ).\ |
| must_next() |
| pkts.filter_ping_request(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_ipv6_dst(ROUTER_3_MLEID).\ |
| must_next() |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_3).\ |
| filter_dst16(ROUTER_2_RLOC16).\ |
| must_next() |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_wpan_dst16(MED_RLOC16).\ |
| must_next() |
| |
| # Step 3: Router_1 sends an ICMPv6 Echo Request to the MED ML-EID address |
| # The DUT MUST respond to the Address Query Request with a properly |
| # formatted Address Notification Message: |
| # CoAP URI-Path |
| # - CON POST coap://[<Address Query Source>]:MM/a/an |
| # CoAP Payload |
| # - ML-EID TLV |
| # - RLOC16 TLV |
| # - Target EID TLV |
| # The IPv6 Source address MUST be the RLOC of the originator |
| # The IPv6 Destination address MUST be the RLOC of the destination |
| |
| pkts.filter_wpan_src64(ROUTER_1).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI, port=MM).\ |
| filter(lambda p: p.thread_address.tlv.target_eid == MED_MLEID).\ |
| must_next() |
| pkts.filter_ipv6_src_dst(ROUTER_2_RLOC, ROUTER_1_RLOC).\ |
| filter_coap_request(ADDR_NTF_URI, port=MM).\ |
| filter(lambda p: { |
| NL_ML_EID_TLV, |
| NL_RLOC16_TLV, |
| NL_TARGET_EID_TLV |
| } <= set(p.coap.tlv.type) and\ |
| p.thread_address.tlv.target_eid == MED_MLEID and\ |
| p.coap.code == COAP_CODE_POST |
| ).\ |
| must_next() |
| _pkt = pkts.filter_ping_request().\ |
| filter_wpan_src64(ROUTER_1).\ |
| filter_ipv6_dst(MED_MLEID).\ |
| must_next() |
| pkts.filter_ping_request(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_ipv6_dst(MED_MLEID).\ |
| must_next() |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(MED).\ |
| filter_wpan_dst16(ROUTER_2_RLOC16).\ |
| must_next() |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_ipv6_dst(ROUTER_1_MLEID).\ |
| must_next() |
| |
| # Step 4: MED sends an ICMPv6 Echo Request to the Router_3 ML-EID |
| # The DUT MUST NOT send an Address Query, as the Router_3 address |
| # should be cached |
| # The DUT MUST forward the ICMPv6 Echo Reply to MED |
| |
| _pkt = pkts.filter_ping_request().\ |
| filter_wpan_src64(MED).\ |
| filter_ipv6_dst(ROUTER_3_MLEID).\ |
| must_next() |
| lstart = pkts.index |
| pkts.filter_ping_request(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_ipv6_dst(ROUTER_3_MLEID).\ |
| must_next() |
| lend = pkts.index |
| |
| pkts.range(lstart, lend).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI).\ |
| must_not_next() |
| |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_3).\ |
| filter_wpan_dst16(ROUTER_2_RLOC16).\ |
| must_next() |
| _pkt1 = pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_wpan_dst16(MED_RLOC16).\ |
| must_next() |
| |
| # Step 5: Power off Router_3 and wait for the Leader to expire its Router ID |
| # Send an ICMPv6 Echo Request from MED to the Router_3 ML-EID address |
| # The DUT MUST update its address cache and removes all entries based |
| # on Router_3’s Router ID. |
| # The DUT MUST send an Address Query to discover Router_3’s RLOC |
| # address. |
| |
| _pkt = pkts.filter_ping_request().\ |
| filter_wpan_src64(MED).\ |
| filter_ipv6_dst(ROUTER_3_MLEID).\ |
| filter(lambda p: p.sniff_timestamp - _pkt1.sniff_timestamp >= 700).\ |
| must_next() |
| pkts.filter_wpan_src64(ROUTER_2).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI, port=MM).\ |
| filter(lambda p: p.thread_address.tlv.target_eid == ROUTER_3_MLEID and\ |
| p.coap.code == COAP_CODE_POST |
| ).\ |
| must_next() |
| |
| # Step 6: Power off MED and wait for the DUT to timeout the child. |
| # Send two ICMPv6 Echo Requests from Router_1 to MED ML-EID |
| # The DUT MUST NOT respond with an Address Notification message |
| |
| pkts.filter_ping_request().\ |
| filter_wpan_src64(ROUTER_1).\ |
| filter_ipv6_dst(MED_MLEID).\ |
| must_next() |
| |
| pkts.filter_wpan_src64(ROUTER_1).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI, port=MM).\ |
| filter(lambda p: p.thread_address.tlv.target_eid == MED_MLEID and\ |
| p.coap.code == COAP_CODE_POST |
| ).\ |
| must_next() |
| |
| pkts.filter_ipv6_src_dst(ROUTER_2_RLOC, ROUTER_1_RLOC).\ |
| filter_coap_request(ADDR_NTF_URI).\ |
| must_not_next() |
| |
| |
| if __name__ == '__main__': |
| unittest.main() |