| #!/usr/bin/env python3 |
| # |
| # Copyright (c) 2016, The OpenThread Authors. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of the copyright holder nor the |
| # names of its contributors may be used to endorse or promote products |
| # derived from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| # |
| |
| import copy |
| import unittest |
| |
| import command |
| import config |
| import copy |
| import ipv6 |
| import thread_cert |
| from pktverify.consts import WIRESHARK_OVERRIDE_PREFS, ADDR_QRY_URI, ADDR_NTF_URI, NL_ML_EID_TLV, NL_RLOC16_TLV, NL_TARGET_EID_TLV |
| from pktverify.packet_verifier import PacketVerifier |
| from pktverify.bytes import Bytes |
| from pktverify.addrs import Ipv6Addr |
| |
| LEADER = 1 |
| BR = 2 |
| ROUTER1 = 3 |
| DUT_ROUTER2 = 4 |
| MED1 = 5 |
| |
| PREFIX_1 = '2003::/64' |
| GUA_1_START = '2003' |
| PREFIX_2 = '2004::/64' |
| |
| # Test Purpose and Description: |
| # ----------------------------- |
| # The purpose of this test case is to validate that the DUT is able to generate |
| # Address Query and Address Notification messages |
| # The Border Router is configured as a SLAAC server for prefixes 2003:: & 2004:: |
| # |
| # Test Topology: |
| # ------------- |
| # BorderRouter - Leader |
| # / \ |
| # Router_1 - Router_2(DUT) |
| # | |
| # MED |
| # |
| # DUT Types: |
| # ---------- |
| # Router |
| |
| |
| class Cert_5_3_10_AddressQuery(thread_cert.TestCase): |
| USE_MESSAGE_FACTORY = False |
| SUPPORT_NCP = False |
| |
| TOPOLOGY = { |
| LEADER: { |
| 'name': 'LEADER', |
| 'mode': 'rdn', |
| 'allowlist': [BR, ROUTER1, DUT_ROUTER2] |
| }, |
| BR: { |
| 'name': 'BR', |
| 'mode': 'rdn', |
| 'allowlist': [LEADER] |
| }, |
| ROUTER1: { |
| 'name': 'ROUTER_1', |
| 'mode': 'rdn', |
| 'allowlist': [LEADER, DUT_ROUTER2] |
| }, |
| DUT_ROUTER2: { |
| 'name': 'ROUTER_2', |
| 'mode': 'rdn', |
| 'allowlist': [LEADER, ROUTER1, MED1] |
| }, |
| MED1: { |
| 'name': 'MED', |
| 'is_mtd': True, |
| 'mode': 'rn', |
| 'allowlist': [DUT_ROUTER2] |
| }, |
| } |
| # override wireshark preferences with case needed parameters |
| CASE_WIRESHARK_PREFS = copy.deepcopy(WIRESHARK_OVERRIDE_PREFS) |
| CASE_WIRESHARK_PREFS['6lowpan.context1'] = PREFIX_1 |
| CASE_WIRESHARK_PREFS['6lowpan.context2'] = PREFIX_2 |
| |
| def test(self): |
| # 1 & 2 |
| self.nodes[LEADER].start() |
| self.simulator.go(5) |
| self.assertEqual(self.nodes[LEADER].get_state(), 'leader') |
| |
| self.nodes[BR].start() |
| self.simulator.go(5) |
| self.assertEqual(self.nodes[BR].get_state(), 'router') |
| |
| # Configure two On-Mesh Prefixes on the BR |
| self.nodes[BR].add_prefix(PREFIX_1, 'paros') |
| self.nodes[BR].add_prefix(PREFIX_2, 'paros') |
| self.nodes[BR].register_netdata() |
| |
| self.nodes[DUT_ROUTER2].start() |
| self.simulator.go(5) |
| self.assertEqual(self.nodes[DUT_ROUTER2].get_state(), 'router') |
| |
| self.nodes[ROUTER1].start() |
| self.simulator.go(5) |
| self.assertEqual(self.nodes[ROUTER1].get_state(), 'router') |
| |
| self.nodes[MED1].start() |
| self.simulator.go(5) |
| self.assertEqual(self.nodes[MED1].get_state(), 'child') |
| |
| self.collect_rlocs() |
| self.collect_rloc16s() |
| self.collect_ipaddrs() |
| |
| # 3 MED1: MED1 sends an ICMPv6 Echo Request to Router1 using GUA |
| # PREFIX_1 address |
| router1_addr = self.nodes[ROUTER1].get_addr(PREFIX_1) |
| self.assertTrue(router1_addr is not None) |
| self.assertTrue(self.nodes[MED1].ping(router1_addr)) |
| self.simulator.go(1) |
| |
| # 4 BR: BR sends an ICMPv6 Echo Request to MED1 using GUA PREFIX_1 |
| # address |
| med1_addr = self.nodes[MED1].get_addr(PREFIX_1) |
| self.assertTrue(med1_addr is not None) |
| self.assertTrue(self.nodes[BR].ping(med1_addr)) |
| self.simulator.go(1) |
| |
| # 5 MED1: MED1 sends an ICMPv6 Echo Request to ROUTER1 using GUA PREFIX_1 |
| # address |
| self.assertTrue(self.nodes[MED1].ping(router1_addr)) |
| self.simulator.go(1) |
| |
| # 6 DUT_ROUTER2: Power off ROUTER1 and wait 580 seconds to allow the |
| # LEADER to expire its Router ID |
| router1_id = self.nodes[ROUTER1].get_router_id() |
| self.nodes[ROUTER1].stop() |
| self.simulator.go(580) |
| |
| # Send an ICMPv6 Echo Request from MED1 to ROUTER1 GUA PREFIX_1 address |
| self.assertFalse(self.nodes[MED1].ping(router1_addr)) |
| self.simulator.go(1) |
| |
| # 7 MED1: Power off MED1 and wait to allow DUT_ROUTER2 to timeout the |
| # child |
| self.nodes[MED1].stop() |
| self.simulator.go(config.MLE_END_DEVICE_TIMEOUT) |
| |
| # BR sends two ICMPv6 Echo Requests to MED1 GUA PREFIX_1 address |
| self.assertFalse(self.nodes[BR].ping(med1_addr)) |
| self.assertFalse(self.nodes[BR].ping(med1_addr)) |
| |
| def verify(self, pv): |
| pkts = pv.pkts |
| pv.summary.show() |
| |
| LEADER = pv.vars['LEADER'] |
| ROUTER_1 = pv.vars['ROUTER_1'] |
| ROUTER_2 = pv.vars['ROUTER_2'] |
| ROUTER_2_RLOC = pv.vars['ROUTER_2_RLOC'] |
| ROUTER_2_RLOC16 = pv.vars['ROUTER_2_RLOC16'] |
| BR = pv.vars['BR'] |
| BR_RLOC = pv.vars['BR_RLOC'] |
| MED = pv.vars['MED'] |
| MED_RLOC16 = pv.vars['MED_RLOC16'] |
| MM = pv.vars['MM_PORT'] |
| GUA1 = {} |
| |
| for node in ('ROUTER_1', 'BR', 'MED'): |
| for addr in pv.vars['%s_IPADDRS' % node]: |
| if addr.startswith(Bytes(GUA_1_START)): |
| GUA1[node] = addr |
| |
| # Step 2: Build the topology as described |
| |
| pv.verify_attached('BR', 'LEADER') |
| for i in (2, 1): |
| pv.verify_attached('ROUTER_%d' % i, 'LEADER') |
| pv.verify_attached('MED', 'ROUTER_2', 'MTD') |
| |
| # Step 3: MED sends an ICMPv6 Echo Request to Router_1 using GUA 2003:: |
| # address |
| # The DUT MUST generate an Address Query Request on MED’s behalf |
| # to find each node’s RLOC. |
| # The Address Query Request MUST be sent to the Realm-Local |
| # All-Routers address (FF03::2) |
| # CoAP URI-Path |
| # - NON POST coap://<FF03::2> |
| # CoAP Payload |
| # - Target EID TLV |
| # The DUT MUST receive and process the incoming Address Query |
| # Response and forward the ICMPv6 Echo Request packet to Router_1 |
| |
| _pkt = pkts.filter_ping_request().\ |
| filter_wpan_src64(MED).\ |
| filter_ipv6_dst(GUA1['ROUTER_1']).\ |
| must_next() |
| pkts.filter_wpan_src64(ROUTER_2).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI, port=MM).\ |
| filter(lambda p: p.thread_address.tlv.target_eid == GUA1['ROUTER_1']).\ |
| must_next() |
| pkts.filter_ping_request(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_ipv6_dst(GUA1['ROUTER_1']).\ |
| must_next() |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_1).\ |
| filter_ipv6_dst(GUA1['MED']).\ |
| must_next() |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_wpan_dst16(MED_RLOC16).\ |
| must_next() |
| |
| # Step 4: Border Router sends an ICMPv6 Echo Request to MED using GUA 2003:: |
| # addresss |
| # The DUT MUST respond to the Address Query Request with a properly |
| # formatted Address Notification Message: |
| # CoAP URI-Path |
| # - CON POST coap://[<Address Query Source>]:MM/a/an |
| # CoAP Payload |
| # - ML-EID TLV |
| # - RLOC16 TLV |
| # - Target EID TLV |
| # The IPv6 Source address MUST be the RLOC of the originator |
| # The IPv6 Destination address MUST be the RLOC of the destination |
| |
| pkts.filter_wpan_src64(BR).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI, port=MM).\ |
| filter(lambda p: p.thread_address.tlv.target_eid == GUA1['MED']).\ |
| must_next() |
| pkts.filter_ipv6_src_dst(ROUTER_2_RLOC, BR_RLOC).\ |
| filter_coap_request(ADDR_NTF_URI, port=MM).\ |
| filter(lambda p: { |
| NL_ML_EID_TLV, |
| NL_RLOC16_TLV, |
| NL_TARGET_EID_TLV |
| } <= set(p.coap.tlv.type) and\ |
| p.thread_address.tlv.target_eid == GUA1['MED'] and\ |
| p.thread_address.tlv.rloc16 == ROUTER_2_RLOC16 |
| ).\ |
| must_next() |
| _pkt = pkts.filter_ping_request().\ |
| filter_wpan_src64(BR).\ |
| filter_ipv6_dst(GUA1['MED']).\ |
| must_next() |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(MED).\ |
| filter_ipv6_dst(GUA1['BR']).\ |
| must_next() |
| |
| # Step 5: MED sends an ICMPv6 Echo Request to Router_1 using GUA 2003:: |
| # address |
| # The DUT MUST not send an Address Query as Router_1 address should |
| # be cached. |
| # The DUT MUST forward the ICMPv6 Echo Reply to MED |
| |
| _pkt = pkts.filter_ping_request().\ |
| filter_wpan_src64(MED).\ |
| filter_ipv6_dst(GUA1['ROUTER_1']).\ |
| must_next() |
| lstart = pkts.index |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_1).\ |
| filter_ipv6_dst(GUA1['MED']).\ |
| must_next() |
| pkts.filter_ping_reply(identifier=_pkt.icmpv6.echo.identifier).\ |
| filter_wpan_src64(ROUTER_2).\ |
| filter_wpan_dst16(MED_RLOC16).\ |
| must_next() |
| lend = pkts.index |
| pkts.range(lstart, lend).filter_wpan_src64(ROUTER_2).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI, port=MM).\ |
| must_not_next() |
| |
| # Step 6: MED sends an ICMPv6 Echo Request to Router_1 using GUA 2003:: |
| # address |
| # The DUT MUST update its address cache and remove all entries |
| # based on Router_1’s Router ID. |
| # The DUT MUST send an Address Query to discover Router_1’s RLOC address. |
| |
| pkts.filter_ping_request().\ |
| filter_wpan_src64(MED).\ |
| filter_ipv6_dst(GUA1['ROUTER_1']).\ |
| must_next() |
| pkts.filter_wpan_src64(ROUTER_2).\ |
| filter_RLARMA().\ |
| filter_coap_request(ADDR_QRY_URI, port=MM).\ |
| filter(lambda p: p.thread_address.tlv.target_eid == GUA1['ROUTER_1']).\ |
| must_next() |
| |
| # Step 7: Border Router sends two ICMPv6 Echo Requests to MED using GUA 2003:: |
| # address |
| # The DUT MUST NOT respond with an Address Notification message |
| |
| pkts.filter_wpan_src64(ROUTER_2).\ |
| filter_ipv6_dst(BR_RLOC).\ |
| filter_coap_request(ADDR_NTF_URI, port=MM).\ |
| must_not_next() |
| pkts.filter_ping_request().\ |
| filter_wpan_src64(BR).\ |
| filter_ipv6_dst(GUA1['MED']).\ |
| must_next() |
| |
| |
| if __name__ == '__main__': |
| unittest.main() |
