| # |
| # Copyright (c) 2016, The OpenThread Authors. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of the copyright holder nor the |
| # names of its contributors may be used to endorse or promote products |
| # derived from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| # |
| |
| # Don't allow this top-level makefile's targets to be built in parallel. |
| |
| .NOTPARALLEL: |
| |
| COVERAGE ?= 0 |
| DEBUG ?= 0 |
| |
| # Enable most features by default to cover most code |
| |
| ANYCAST_LOCATOR ?= 1 |
| BORDER_AGENT ?= 1 |
| BORDER_ROUTER ?= 1 |
| COAP ?= 1 |
| COAP_BLOCK ?= 1 |
| COAP_OBSERVE ?= 1 |
| COAPS ?= 1 |
| COMMISSIONER ?= 1 |
| CHANNEL_MANAGER ?= 1 |
| CHANNEL_MONITOR ?= 1 |
| CHILD_SUPERVISION ?= 1 |
| DATASET_UPDATER ?= 1 |
| DHCP6_CLIENT ?= 1 |
| DHCP6_SERVER ?= 1 |
| DIAGNOSTIC ?= 1 |
| DNS_CLIENT ?= 1 |
| DNS_DSO ?= 1 |
| DNSSD_SERVER ?= 1 |
| ECDSA ?= 1 |
| HISTORY_TRACKER ?= 1 |
| IP6_FRAGM ?= 1 |
| JAM_DETECTION ?= 1 |
| JOINER ?= 1 |
| LEGACY ?= 1 |
| LINK_RAW ?= 1 |
| MAC_FILTER ?= 1 |
| MTD_NETDIAG ?= 1 |
| NEIGHBOR_DISCOVERY_AGENT ?= 1 |
| NETDATA_PUBLISHER ?= 1 |
| PING_SENDER ?= 1 |
| REFERENCE_DEVICE ?= 1 |
| SERVICE ?= 1 |
| SNTP_CLIENT ?= 1 |
| SRP_CLIENT ?= 1 |
| SRP_SERVER ?= 1 |
| UDP_FORWARD ?= 1 |
| |
| COMMONCFLAGS := \ |
| -g \ |
| $(NULL) |
| |
| # If the user has asserted COVERAGE, alter the configuration options |
| # accordingly. |
| |
| configure_OPTIONS = \ |
| --enable-cli \ |
| --enable-ftd \ |
| --enable-mtd \ |
| --enable-ncp \ |
| --enable-radio-only \ |
| --with-examples=simulation \ |
| $(NULL) |
| |
| # Platform specific switches |
| |
| ifneq ($(DEBUG),1) |
| COMMONCFLAGS += \ |
| -O2 \ |
| $(NULL) |
| endif |
| |
| ifeq ($(NCP_SPI),1) |
| COMMONCFLAGS += -DOPENTHREAD_CONFIG_NCP_SPI_ENABLE=1 |
| else |
| COMMONCFLAGS += -DOPENTHREAD_CONFIG_NCP_HDLC_ENABLE=1 |
| endif # NCP_SPI == 1 |
| |
| ifeq ($(OTNS),1) |
| VIRTUAL_TIME ?= 1 |
| endif |
| |
| ifeq ($(VIRTUAL_TIME),1) |
| COMMONCFLAGS += -DOPENTHREAD_SIMULATION_VIRTUAL_TIME=1 |
| endif |
| |
| ifeq ($(VIRTUAL_TIME_UART),1) |
| COMMONCFLAGS += -DOPENTHREAD_SIMULATION_VIRTUAL_TIME_UART=1 |
| endif |
| |
| ifneq ($(MAX_NETWORK_SIZE),) |
| COMMONCFLAGS += -DOPENTHREAD_SIMULATION_MAX_NETWORK_SIZE=$(MAX_NETWORK_SIZE) |
| endif |
| |
| include $(dir $(abspath $(lastword $(MAKEFILE_LIST))))/common-switches.mk |
| |
| TopSourceDir := $(dir $(shell readlink $(firstword $(MAKEFILE_LIST)))).. |
| AbsTopSourceDir := $(dir $(realpath $(firstword $(MAKEFILE_LIST)))).. |
| |
| CONFIG_FILE = OPENTHREAD_PROJECT_CORE_CONFIG_FILE='\"openthread-core-simulation-config.h\"' |
| CONFIG_FILE_PATH = $(AbsTopSourceDir)/examples/platforms/simulation/ |
| COMMONCFLAGS += \ |
| -D$(CONFIG_FILE) \ |
| -I$(CONFIG_FILE_PATH) \ |
| |
| CPPFLAGS += \ |
| $(COMMONCFLAGS) \ |
| $(NULL) |
| |
| CFLAGS += \ |
| $(COMMONCFLAGS) \ |
| $(NULL) |
| |
| CXXFLAGS += \ |
| $(COMMONCFLAGS) \ |
| $(NULL) |
| |
| LDFLAGS += \ |
| $(COMMONCFLAGS) \ |
| $(NULL) |
| |
| ECHO := @echo |
| INSTALL := /usr/bin/install |
| INSTALLFLAGS := -p |
| LN_S := ln -s |
| MAKE := make |
| MKDIR_P := mkdir -p |
| RM_F := rm -f |
| |
| BuildJobs ?= 10 |
| BuildPath = build |
| TopBuildDir = $(BuildPath) |
| AbsTopBuildDir = $(PWD)/$(TopBuildDir) |
| |
| ResultPath = output |
| TopResultDir = $(ResultPath) |
| AbsTopResultDir = $(PWD)/$(TopResultDir) |
| |
| TargetTuple = simulation |
| |
| ifndef BuildJobs |
| BuildJobs := $(shell getconf _NPROCESSORS_ONLN) |
| endif |
| JOBSFLAG := -j$(BuildJobs) |
| |
| # |
| # configure-arch <target> |
| # |
| # Configure OpenThread for the specified target. |
| # |
| # target - The target to configure. |
| # |
| define configure-target |
| $(ECHO) " CONFIG $(1)..." |
| (cd $(BuildPath)/$(1) && $(AbsTopSourceDir)/configure \ |
| INSTALL="$(INSTALL) $(INSTALLFLAGS)" \ |
| CPPFLAGS="$(CPPFLAGS)" CFLAGS="$(CFLAGS)" CXXFLAGS="$(CXXFLAGS)" LDFLAGS="$(LDFLAGS)" \ |
| --prefix=/ \ |
| --exec-prefix=/$(1) \ |
| $(configure_OPTIONS)) |
| endef # configure-target |
| |
| # |
| # build-target <target> |
| # |
| # Build the OpenThread intermediate build products for the specified |
| # target. |
| # |
| # target - The target to build. |
| # |
| define build-target |
| $(ECHO) " BUILD $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| all |
| endef # build-target |
| |
| # |
| # check-target <target> |
| # |
| # Check (run unit tests) OpenThread for the specified target. |
| # |
| # target - The target to check. |
| # |
| define check-target |
| $(ECHO) " CHECK $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| check |
| endef # check-target |
| |
| # |
| # distcheck-target <target> |
| # |
| # Check (run unit tests) OpenThread for the specified target. |
| # |
| # target - The target to distcheck. |
| # |
| define distcheck-target |
| $(ECHO) " DISTCHECK $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| distcheck |
| endef # distcheck-target |
| |
| # |
| # coverage-target <target> |
| # |
| # Generate code coverage from unit tests for OpenThread for the |
| # specified target. |
| # |
| # target - The target to generate code coverage for. |
| # |
| define coverage-target |
| $(ECHO) " COVERAGE $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| coverage |
| endef # coverage-target |
| |
| # |
| # stage-target <target> |
| # |
| # Stage (install) the OpenThread final build products for the specified |
| # target. |
| # |
| # target - The target to stage. |
| # |
| define stage-target |
| $(ECHO) " STAGE $(1)" |
| $(MAKE) $(JOBSFLAG) -C $(BuildPath)/$(1) --no-print-directory \ |
| DESTDIR=$(AbsTopResultDir) \ |
| install |
| endef # stage-target |
| |
| # |
| # TARGET_template <target> |
| # |
| # Define macros, targets and rules to configure, build, and stage |
| # OpenThread for a single target. |
| # |
| # target - The target to instantiate the template for. |
| # |
| define TARGET_template |
| CONFIGURE_TARGETS += configure-$(1) |
| BUILD_TARGETS += do-build-$(1) |
| CHECK_TARGETS += check-$(1) |
| DISTCHECK_TARGETS += distcheck-$(1) |
| COVERAGE_TARGETS += coverage-$(1) |
| STAGE_TARGETS += stage-$(1) |
| BUILD_DIRS += $(BuildPath)/$(1) |
| DIRECTORIES += $(BuildPath)/$(1) |
| |
| configure-$(1): $(BuildPath)/$(1)/config.status |
| |
| $(BuildPath)/$(1)/config.status: | $(BuildPath)/$(1) |
| $$(call configure-target,$(1)) |
| |
| do-build-$(1): configure-$(1) |
| |
| do-build-$(1): |
| +$$(call build-target,$(1)) |
| |
| check-$(1): do-build-$(1) |
| |
| check-$(1): |
| +$$(call check-target,$(1)) |
| |
| distcheck-$(1): do-build-$(1) |
| |
| distcheck-$(1): |
| +$$(call distcheck-target,$(1)) |
| |
| coverage-$(1): do-build-$(1) |
| |
| coverage-$(1): |
| +$$(call coverage-target,$(1)) |
| |
| stage-$(1): do-build-$(1) |
| |
| stage-$(1): | $(TopResultDir) |
| $$(call stage-target,$(1)) |
| |
| $(1): stage-$(1) |
| endef # TARGET_template |
| |
| .DEFAULT_GOAL := all |
| |
| all: stage |
| |
| # Instantiate an target-specific build template for the target. |
| |
| $(eval $(call TARGET_template,$(TargetTuple))) |
| |
| # |
| # Common / Finalization |
| # |
| |
| configure: $(CONFIGURE_TARGETS) |
| |
| build: $(BUILD_TARGETS) |
| |
| check: $(CHECK_TARGETS) |
| |
| distcheck: $(DISTCHECK_TARGETS) |
| |
| coverage: $(COVERAGE_TARGETS) |
| |
| stage: $(STAGE_TARGETS) |
| |
| DIRECTORIES = $(TopResultDir) $(TopResultDir)/$(TargetTuple)/lib $(BUILD_DIRS) |
| |
| CLEAN_DIRS = $(TopResultDir) $(BUILD_DIRS) |
| |
| all: stage |
| |
| $(DIRECTORIES): |
| $(ECHO) " MKDIR $@" |
| @$(MKDIR_P) "$@" |
| |
| clean: |
| $(ECHO) " CLEAN" |
| @$(RM_F) -r $(CLEAN_DIRS) |
| |
| help: |
| $(ECHO) "Simply type 'make -f $(firstword $(MAKEFILE_LIST))' to build OpenThread for the following " |
| $(ECHO) "target:" |
| $(ECHO) "" |
| $(ECHO) " $(TargetTuple)" |
| $(ECHO) "" |
