| #!/usr/bin/env python3 |
| # |
| # Copyright (c) 2018, The OpenThread Authors. |
| # All rights reserved. |
| # |
| # Redistribution and use in source and binary forms, with or without |
| # modification, are permitted provided that the following conditions are met: |
| # 1. Redistributions of source code must retain the above copyright |
| # notice, this list of conditions and the following disclaimer. |
| # 2. Redistributions in binary form must reproduce the above copyright |
| # notice, this list of conditions and the following disclaimer in the |
| # documentation and/or other materials provided with the distribution. |
| # 3. Neither the name of the copyright holder nor the |
| # names of its contributors may be used to endorse or promote products |
| # derived from this software without specific prior written permission. |
| # |
| # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| # AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| # ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| # LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| # POSSIBILITY OF SUCH DAMAGE. |
| |
| import time |
| import wpan |
| from wpan import verify |
| |
| # ----------------------------------------------------------------------------------------------------------------------- |
| # Test description: Testing controlling of NCP's MCU power state |
| |
| test_name = __file__[:-3] if __file__.endswith('.py') else __file__ |
| print('-' * 120) |
| print('Starting \'{}\''.format(test_name)) |
| |
| # ----------------------------------------------------------------------------------------------------------------------- |
| # Creating `wpan.Nodes` instances |
| |
| node = wpan.Node() |
| |
| # ----------------------------------------------------------------------------------------------------------------------- |
| # Init all nodes |
| |
| wpan.Node.init_all_nodes() |
| |
| # ----------------------------------------------------------------------------------------------------------------------- |
| # Test implementation |
| |
| # Verify that state is ON after a reset |
| verify(node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_ON) |
| |
| # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| # Check power state wpantund property get and set |
| |
| WAIT_TIME = 5 |
| |
| |
| def check_wpan_is_in_offline_state(): |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_OFFLINE) |
| |
| |
| def check_wpan_is_in_deep_sleep_state(): |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_DEEP_SLEEP) |
| |
| |
| def check_wpan_is_in_commissioned_state(): |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_COMMISSIONED) |
| |
| |
| def check_wpan_is_in_associated_state(): |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_ASSOCIATED) |
| |
| |
| def check_wpan_is_in_associating_state(): |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_ASSOCIATING) |
| |
| |
| node.form("mcu-power-state") |
| verify(node.is_associated()) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, 'low-power') |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_ASSOCIATED) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, 'on') |
| verify(node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_ON) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, |
| 'lp') # special short-form string for low-power |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_ON) |
| verify(node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_ON) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_LOW_POWER) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_ASSOCIATED) |
| |
| # Verify that `wpantund` will restore the user-set value after NCP reset |
| |
| node.reset() |
| time.sleep(1) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_ON) |
| |
| # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| # Check the `wpantund` state changes between "deep-sleep" and "offline" |
| |
| node.leave() |
| verify(not node.is_associated()) |
| |
| verify(node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_ON) |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_OFFLINE) |
| |
| # Setting the power state to `low-power` should change wpantund state to |
| # `DEEP_SLEEP` |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_LOW_POWER) |
| wpan.verify_within(check_wpan_is_in_deep_sleep_state, WAIT_TIME) |
| |
| # Verify that reading/getting a property does not impact the wpantund state. |
| |
| node.get(wpan.WPAN_THREAD_RLOC16) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_DEEP_SLEEP) |
| |
| # Setting the power state to `on` should change wpantund state to `OFFLINE` |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_ON) |
| wpan.verify_within(check_wpan_is_in_offline_state, WAIT_TIME) |
| |
| # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| # Verify the behavior of `begin-low-power` wpanctl command |
| |
| node.wpanctl('begin-low-power') |
| wpan.verify_within(check_wpan_is_in_deep_sleep_state, WAIT_TIME) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_ON) |
| wpan.verify_within(check_wpan_is_in_offline_state, WAIT_TIME) |
| |
| # Check the `wpantund` state changes between "offline:commissioned" and |
| # "deep-sleep" |
| |
| node.form("test-network") |
| node.set('Daemon:AutoAssociateAfterReset', '0') |
| |
| # Verify that issuing a `begin-low-power` when in "associated" state |
| # does not change the state. |
| node.wpanctl('begin-low-power') |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_ASSOCIATED) |
| |
| # After reset, power state should remain `LOW_POWER` (wpantund would restore the value |
| # on NCP) and since "AutoAssociateAfterReset" is disabled, wpantund state should |
| # be `DEEP_SLEEP`. |
| |
| node.reset() |
| wpan.verify_within(check_wpan_is_in_deep_sleep_state, WAIT_TIME) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_ON) |
| wpan.verify_within(check_wpan_is_in_commissioned_state, WAIT_TIME) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_LOW_POWER) |
| wpan.verify_within(check_wpan_is_in_deep_sleep_state, WAIT_TIME) |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_ON) |
| node.leave() |
| |
| # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| # Verify sleep behavior after disabling `wpantund` ("Daemon:Enabled" |
| # property) when state is "offline" |
| |
| verify(node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_ON) |
| verify(node.get(wpan.WPAN_STATE) == wpan.STATE_OFFLINE) |
| verify(node.get('Daemon:Enabled') == 'true') |
| |
| # Disabling `wpantund` should put the NCP to deep sleep |
| node.set('Daemon:Enabled', 'false') |
| verify(node.get('Daemon:Enabled') == 'false') |
| wpan.verify_within(check_wpan_is_in_deep_sleep_state, WAIT_TIME) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| |
| # Enabling `wpantund` should update the `MCU_POWER_STATE` back to `ON`. |
| node.set('Daemon:Enabled', 'true') |
| wpan.verify_within(check_wpan_is_in_offline_state, WAIT_TIME) |
| verify(node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_ON) |
| |
| # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| # Verify sleep behavior after disabling `wpantund` ("Daemon:Enabled" |
| # property) when state is "associated" |
| |
| node.form("disable-test") |
| verify(node.is_associated()) |
| verify(node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_ON) |
| |
| node.set('Daemon:Enabled', 'false') |
| verify(node.get('Daemon:Enabled') == 'false') |
| wpan.verify_within(check_wpan_is_in_deep_sleep_state, WAIT_TIME) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| |
| node.set('Daemon:Enabled', 'true') |
| wpan.verify_within(check_wpan_is_in_commissioned_state, WAIT_TIME) |
| verify(node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_ON) |
| |
| node.leave() |
| |
| # - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - |
| # Verify `AutoAssociateAfterReset` behavior after reset from "deep-sleep" |
| # (but commissioned). |
| |
| node.set('Daemon:AutoAssociateAfterReset', '1') |
| |
| node.set(wpan.WPAN_NCP_MCU_POWER_STATE, wpan.MCU_POWER_STATE_LOW_POWER) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| |
| node.form("resume-test") |
| verify(node.is_associated()) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| |
| node.reset() |
| |
| # After reset, power state should remain `LOW_POWER` (wpantund would restore the value |
| # on NCP) and wpantund state should start as "deep-sleep" but since AutoAssociateAfterReset |
| # is enabled, network should be recovered. |
| |
| wpan.verify_within(check_wpan_is_in_associating_state, WAIT_TIME) |
| verify( |
| node.get(wpan.WPAN_NCP_MCU_POWER_STATE) == wpan.MCU_POWER_STATE_LOW_POWER) |
| |
| # ----------------------------------------------------------------------------------------------------------------------- |
| # Test finished |
| |
| wpan.Node.finalize_all_nodes() |
| |
| print('\'{}\' passed.'.format(test_name)) |