src/core/config/logging.h - third_party/openthread - Git at Google

 /*
  *  Copyright (c) 2019, The OpenThread Authors.
  *  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions are met:
  *  1. Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *  2. Redistributions in binary form must reproduce the above copyright
  *     notice, this list of conditions and the following disclaimer in the
  *     documentation and/or other materials provided with the distribution.
  *  3. Neither the name of the copyright holder nor the
  *     names of its contributors may be used to endorse or promote products
  *     derived from this software without specific prior written permission.
  *
  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  *  POSSIBILITY OF SUCH DAMAGE.
  */

 /**
  * @file
  *   This file includes compile-time configurations for the logging service.
  *
  */

 #ifndef CONFIG_LOGGING_H_
 #define CONFIG_LOGGING_H_

 /**
  * @def OPENTHREAD_CONFIG_LOG_OUTPUT
  *
  * Selects if, and where the LOG output goes to.
  *
  * There are several options available
  * - @sa OPENTHREAD_CONFIG_LOG_OUTPUT_NONE
  * - @sa OPENTHREAD_CONFIG_LOG_OUTPUT_DEBUG_UART
  * - @sa OPENTHREAD_CONFIG_LOG_OUTPUT_APP
  * - @sa OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
  * - and others
  *
  * Note:
  *
  * 1) Because the default is: OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
  *    The platform is expected to provide at least a stub for `otPlatLog()`.
  *
  * 2) This is effectively an ENUM so it can be if/else/endif at compile time.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_OUTPUT
 #define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
 #endif

 /** Log output goes to the bit bucket (disabled) */
 #define OPENTHREAD_CONFIG_LOG_OUTPUT_NONE 0
 /** Log output goes to the debug uart - requires OPENTHREAD_CONFIG_ENABLE_DEBUG_UART to be enabled */
 #define OPENTHREAD_CONFIG_LOG_OUTPUT_DEBUG_UART 1
 /** Log output goes to the "application" provided otPlatLog() in NCP and CLI code */
 #define OPENTHREAD_CONFIG_LOG_OUTPUT_APP 2
 /** Log output is handled by a platform defined function */
 #define OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED 3

 /**
  * @def OPENTHREAD_CONFIG_LOG_LEVEL
  *
  * The log level (used at compile time). If `OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE` is set, this defines the most
  * verbose log level possible. See `OPENTHREAD_CONFIG_LOG_LEVEL_INIT` to set the initial log level.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_LEVEL
 #define OPENTHREAD_CONFIG_LOG_LEVEL OT_LOG_LEVEL_CRIT
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
  *
  * Define as 1 to enable dynamic log level control.
  *
  * Note that the OPENTHREAD_CONFIG_LOG_LEVEL determines the log level at
  * compile time. The dynamic log level control (if enabled) only allows
  * decreasing the log level from the compile time value.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
 #define OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE 0
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_LEVEL_INIT
  *
  * The initial log level used when OpenThread is initialized. See
  * `OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE`.
  */
 #ifndef OPENTHREAD_CONFIG_LOG_LEVEL_INIT
 #define OPENTHREAD_CONFIG_LOG_LEVEL_INIT OPENTHREAD_CONFIG_LOG_LEVEL
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_API
  *
  * Define to enable OpenThread API logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_API
 #define OPENTHREAD_CONFIG_LOG_API 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_MLE
  *
  * Define to enable MLE logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_MLE
 #define OPENTHREAD_CONFIG_LOG_MLE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_MESHCOP
  *
  * Define to enable MeshCoP logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_MESHCOP
 #define OPENTHREAD_CONFIG_LOG_MESHCOP 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_ARP
  *
  * Define to enable EID-to-RLOC map logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_ARP
 #define OPENTHREAD_CONFIG_LOG_ARP 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_NETDATA
  *
  * Define to enable Network Data logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_NETDATA
 #define OPENTHREAD_CONFIG_LOG_NETDATA 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_ICMP
  *
  * Define to enable ICMPv6 logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_ICMP
 #define OPENTHREAD_CONFIG_LOG_ICMP 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_IP6
  *
  * Define to enable IPv6 logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_IP6
 #define OPENTHREAD_CONFIG_LOG_IP6 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_MAC
  *
  * Define to enable IEEE 802.15.4 MAC logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_MAC
 #define OPENTHREAD_CONFIG_LOG_MAC 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_MEM
  *
  * Define to enable memory logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_MEM
 #define OPENTHREAD_CONFIG_LOG_MEM 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_PKT_DUMP
  *
  * Define to enable log content of packets.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_PKT_DUMP
 #define OPENTHREAD_CONFIG_LOG_PKT_DUMP 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_NETDIAG
  *
  * Define to enable network diagnostic logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_NETDIAG
 #define OPENTHREAD_CONFIG_LOG_NETDIAG 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_PLATFORM
  *
  * Define to enable platform region logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_PLATFORM
 #define OPENTHREAD_CONFIG_LOG_PLATFORM 0
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_CLI
  *
  * Define to enable CLI logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_CLI
 #define OPENTHREAD_CONFIG_LOG_CLI 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_COAP
  *
  * Define to enable COAP logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_COAP
 #define OPENTHREAD_CONFIG_LOG_COAP 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_CORE
  *
  * Define to enable OpenThread Core logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_CORE
 #define OPENTHREAD_CONFIG_LOG_CORE 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_UTIL
  *
  * Define to enable OpenThread Utility module logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_UTIL
 #define OPENTHREAD_CONFIG_LOG_UTIL 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_BBR
  *
  * Note: available since Thread 1.2.
  *
  * Define to enable Backbone Router (BBR) region logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_BBR
 #define OPENTHREAD_CONFIG_LOG_BBR 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_MLR
  *
  * Note: available since Thread 1.2.
  *
  * Define to enable Multicast Listener Registration (MLR) region logging.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_MLR
 #define OPENTHREAD_CONFIG_LOG_MLR 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL
  *
  * Define to prepend the log level to all log messages.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL
 #define OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_PREPEND_REGION
  *
  * Define to prepend the log region to all log messages.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_PREPEND_REGION
 #define OPENTHREAD_CONFIG_LOG_PREPEND_REGION 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_SUFFIX
  *
  * Define suffix to append at the end of logs.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_SUFFIX
 #define OPENTHREAD_CONFIG_LOG_SUFFIX ""
 #endif

 /**
  * @def OPENTHREAD_CONFIG_LOG_SRC_DST_IP_ADDRESSES
  *
  * If defined as 1 when IPv6 message info is logged in mesh-forwarder, the source and destination IPv6 addresses of
  * messages are also included.
  *
  */
 #ifndef OPENTHREAD_CONFIG_LOG_SRC_DST_IP_ADDRESSES
 #define OPENTHREAD_CONFIG_LOG_SRC_DST_IP_ADDRESSES 1
 #endif

 /**
  * @def OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION
  *
  * Defines the name of function/macro used for logging inside OpenThread, by default it is set to `otPlatLog()`.
  *
  */
 #ifndef OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION
 #define OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION otPlatLog
 #endif

 #endif // CONFIG_LOGGING_H_
	/*
	* Copyright (c) 2019, The OpenThread Authors.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. Neither the name of the copyright holder nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	/**
	* @file
	* This file includes compile-time configurations for the logging service.
	*
	*/

	#ifndef CONFIG_LOGGING_H_
	#define CONFIG_LOGGING_H_

	/**
	* @def OPENTHREAD_CONFIG_LOG_OUTPUT
	*
	* Selects if, and where the LOG output goes to.
	*
	* There are several options available
	* - @sa OPENTHREAD_CONFIG_LOG_OUTPUT_NONE
	* - @sa OPENTHREAD_CONFIG_LOG_OUTPUT_DEBUG_UART
	* - @sa OPENTHREAD_CONFIG_LOG_OUTPUT_APP
	* - @sa OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
	* - and others
	*
	* Note:
	*
	* 1) Because the default is: OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
	* The platform is expected to provide at least a stub for `otPlatLog()`.
	*
	* 2) This is effectively an ENUM so it can be if/else/endif at compile time.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_OUTPUT
	#define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED
	#endif

	/** Log output goes to the bit bucket (disabled) */
	#define OPENTHREAD_CONFIG_LOG_OUTPUT_NONE 0
	/** Log output goes to the debug uart - requires OPENTHREAD_CONFIG_ENABLE_DEBUG_UART to be enabled */
	#define OPENTHREAD_CONFIG_LOG_OUTPUT_DEBUG_UART 1
	/** Log output goes to the "application" provided otPlatLog() in NCP and CLI code */
	#define OPENTHREAD_CONFIG_LOG_OUTPUT_APP 2
	/** Log output is handled by a platform defined function */
	#define OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED 3

	/**
	* @def OPENTHREAD_CONFIG_LOG_LEVEL
	*
	* The log level (used at compile time). If `OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE` is set, this defines the most
	* verbose log level possible. See `OPENTHREAD_CONFIG_LOG_LEVEL_INIT` to set the initial log level.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_LEVEL
	#define OPENTHREAD_CONFIG_LOG_LEVEL OT_LOG_LEVEL_CRIT
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
	*
	* Define as 1 to enable dynamic log level control.
	*
	* Note that the OPENTHREAD_CONFIG_LOG_LEVEL determines the log level at
	* compile time. The dynamic log level control (if enabled) only allows
	* decreasing the log level from the compile time value.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
	#define OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE 0
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_LEVEL_INIT
	*
	* The initial log level used when OpenThread is initialized. See
	* `OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE`.
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_LEVEL_INIT
	#define OPENTHREAD_CONFIG_LOG_LEVEL_INIT OPENTHREAD_CONFIG_LOG_LEVEL
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_API
	*
	* Define to enable OpenThread API logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_API
	#define OPENTHREAD_CONFIG_LOG_API 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_MLE
	*
	* Define to enable MLE logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_MLE
	#define OPENTHREAD_CONFIG_LOG_MLE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_MESHCOP
	*
	* Define to enable MeshCoP logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_MESHCOP
	#define OPENTHREAD_CONFIG_LOG_MESHCOP 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_ARP
	*
	* Define to enable EID-to-RLOC map logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_ARP
	#define OPENTHREAD_CONFIG_LOG_ARP 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_NETDATA
	*
	* Define to enable Network Data logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_NETDATA
	#define OPENTHREAD_CONFIG_LOG_NETDATA 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_ICMP
	*
	* Define to enable ICMPv6 logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_ICMP
	#define OPENTHREAD_CONFIG_LOG_ICMP 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_IP6
	*
	* Define to enable IPv6 logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_IP6
	#define OPENTHREAD_CONFIG_LOG_IP6 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_MAC
	*
	* Define to enable IEEE 802.15.4 MAC logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_MAC
	#define OPENTHREAD_CONFIG_LOG_MAC 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_MEM
	*
	* Define to enable memory logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_MEM
	#define OPENTHREAD_CONFIG_LOG_MEM 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_PKT_DUMP
	*
	* Define to enable log content of packets.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_PKT_DUMP
	#define OPENTHREAD_CONFIG_LOG_PKT_DUMP 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_NETDIAG
	*
	* Define to enable network diagnostic logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_NETDIAG
	#define OPENTHREAD_CONFIG_LOG_NETDIAG 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_PLATFORM
	*
	* Define to enable platform region logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_PLATFORM
	#define OPENTHREAD_CONFIG_LOG_PLATFORM 0
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_CLI
	*
	* Define to enable CLI logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_CLI
	#define OPENTHREAD_CONFIG_LOG_CLI 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_COAP
	*
	* Define to enable COAP logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_COAP
	#define OPENTHREAD_CONFIG_LOG_COAP 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_CORE
	*
	* Define to enable OpenThread Core logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_CORE
	#define OPENTHREAD_CONFIG_LOG_CORE 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_UTIL
	*
	* Define to enable OpenThread Utility module logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_UTIL
	#define OPENTHREAD_CONFIG_LOG_UTIL 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_BBR
	*
	* Note: available since Thread 1.2.
	*
	* Define to enable Backbone Router (BBR) region logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_BBR
	#define OPENTHREAD_CONFIG_LOG_BBR 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_MLR
	*
	* Note: available since Thread 1.2.
	*
	* Define to enable Multicast Listener Registration (MLR) region logging.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_MLR
	#define OPENTHREAD_CONFIG_LOG_MLR 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL
	*
	* Define to prepend the log level to all log messages.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL
	#define OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_PREPEND_REGION
	*
	* Define to prepend the log region to all log messages.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_PREPEND_REGION
	#define OPENTHREAD_CONFIG_LOG_PREPEND_REGION 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_SUFFIX
	*
	* Define suffix to append at the end of logs.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_SUFFIX
	#define OPENTHREAD_CONFIG_LOG_SUFFIX ""
	#endif

	/**
	* @def OPENTHREAD_CONFIG_LOG_SRC_DST_IP_ADDRESSES
	*
	* If defined as 1 when IPv6 message info is logged in mesh-forwarder, the source and destination IPv6 addresses of
	* messages are also included.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_LOG_SRC_DST_IP_ADDRESSES
	#define OPENTHREAD_CONFIG_LOG_SRC_DST_IP_ADDRESSES 1
	#endif

	/**
	* @def OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION
	*
	* Defines the name of function/macro used for logging inside OpenThread, by default it is set to `otPlatLog()`.
	*
	*/
	#ifndef OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION
	#define OPENTHREAD_CONFIG_PLAT_LOG_FUNCTION otPlatLog
	#endif

	#endif // CONFIG_LOGGING_H_