tests/toranj/openthread-core-toranj-config.h - third_party/openthread - Git at Google

 /*
  *  Copyright (c) 2018, The OpenThread Authors.
  *  All rights reserved.
  *
  *  Redistribution and use in source and binary forms, with or without
  *  modification, are permitted provided that the following conditions are met:
  *  1. Redistributions of source code must retain the above copyright
  *     notice, this list of conditions and the following disclaimer.
  *  2. Redistributions in binary form must reproduce the above copyright
  *     notice, this list of conditions and the following disclaimer in the
  *     documentation and/or other materials provided with the distribution.
  *  3. Neither the name of the copyright holder nor the
  *     names of its contributors may be used to endorse or promote products
  *     derived from this software without specific prior written permission.
  *
  *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  *  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  *  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  *  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  *  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  *  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  *  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  *  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  *  POSSIBILITY OF SUCH DAMAGE.
  */

 /**
  * This header file defines the OpenThread core configuration options used in NCP build for `toranj` test framework.
  *
  */

 #if !defined(OPENTHREAD_CORE_TORANJ_CONFIG_SIMULATION_H_) && !defined(OPENTHREAD_CORE_TORANJ_CONFIG_POSIX_H_)
 #error "This header file should only be included through the platform-specific one"
 #endif

 #ifndef OPENTHREAD_RADIO
 #define OPENTHREAD_RADIO 0
 #endif

 #ifndef OPENTHREAD_RADIO
 #define OPENTHREAD_RADIO_CLI 0
 #endif

 /**
  * @def OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE
  *
  * Define to 1 to enable Thread Test Harness reference device support.
  *
  */
 #define OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_UPTIME_ENABLE
  *
  * Define to 1 to enable tracking the uptime of OpenThread instance.
  *
  */
 #define OPENTHREAD_CONFIG_UPTIME_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE
  *
  * Define to 1 to enable Border Router support.
  *
  */
 #define OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE
  *
  * Define to 1 to enable Border Routing support.
  *
  */
 #define OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_COMMISSIONER_ENABLE
  *
  * Define to 1 to enable Commissioner support.
  *
  */
 #define OPENTHREAD_CONFIG_COMMISSIONER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES
  *
  * The maximum number of Joiner entries maintained by the Commissioner.
  *
  */
 #define OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES 4

 /**
  * @def OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE
  *
  * Define to 1 to enable Border Agent support.
  *
  */
 #define OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_DIAG_ENABLE
  *
  * Define to 1 to enable Factory Diagnostics support.
  *
  */
 #define OPENTHREAD_CONFIG_DIAG_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_JOINER_ENABLE
  *
  * Define to 1 to enable Joiner support.
  *
  */
 #define OPENTHREAD_CONFIG_JOINER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE
  *
  * Define to 1 to support injecting Service entries into the Thread Network Data.
  *
  */
 #define OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE
  *
  * Define to 1 to enable Network Data Publisher.
  *
  */
 #define OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE
  *
  * Define to 1 to enable TMF anycast locator functionality.
  *
  */
 #define OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_LEGACY_ENABLE
  *
  * Define to 1 to enable legacy network support.
  *
  */
 #define OPENTHREAD_CONFIG_LEGACY_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_ECDSA_ENABLE
  *
  * Define to 1 to enable ECDSA support.
  *
  */
 #define OPENTHREAD_CONFIG_ECDSA_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE
  *
  * Define to 1 to enable the Jam Detection service.
  *
  */
 #define OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS
  *
  * The number of message buffers in the buffer pool.
  *
  */
 #define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS 256

 /**
  * @def OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE
  *
  * Whether use heap allocator for message buffers.
  *
  */
 #define OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE 0

 /**
  * @def OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES
  *
  * The number of EID-to-RLOC cache entries.
  *
  */
 #define OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES 16

 /**
  * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT
  *
  * The timeout value (in seconds) waiting for a address notification response after sending an address query.
  *
  * Default: 3 seconds
  *
  */
 #define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT 6

 /**
  * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY
  *
  * Initial retry delay for address query (in seconds).
  *
  */
 #define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY 4

 /**
  * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY
  *
  * Maximum retry delay for address query (in seconds).
  *
  * Default: 28800 seconds (480 minutes or 8 hours)
  *
  */
 #define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY 120

 /**
  * @def OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_MAX_SNOOP_ENTRIES
  *
  * The maximum number of EID-to-RLOC cache entries that can be uses for "snoop optimization" where an entry is created
  * by inspecting a received message.
  *
  */
 #define OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_MAX_SNOOP_ENTRIES 2

 /**
  * @def OPENTHREAD_CONFIG_TMF_SNOOP_CACHE_ENTRY_TIMEOUT
  *
  * The timeout value (in seconds) blocking eviction of an address cache entry created through snoop optimization (i.e.,
  * inspection of a received message). After the timeout expires the entry can be reclaimed again. This timeout allows
  * a longer response delay for a received message giving more chance that a snooped entry will be used (avoiding
  * sending Address Query when a response message is sent to same destination from which the message was received
  * earlier).
  *
  */
 #define OPENTHREAD_CONFIG_TMF_SNOOP_CACHE_ENTRY_TIMEOUT 3

 /**
  * @def OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
  *
  * The maximum number of children.
  *
  */
 #define OPENTHREAD_CONFIG_MLE_MAX_CHILDREN 32

 /**
  * @def OPENTHREAD_CONFIG_MLE_CHILD_TIMEOUT_DEFAULT
  *
  * The default child timeout value (in seconds).
  *
  */
 #define OPENTHREAD_CONFIG_MLE_CHILD_TIMEOUT_DEFAULT 120

 /**
  * @def OPENTHREAD_CONFIG_MLE_IP_ADDRS_PER_CHILD
  *
  * The maximum number of supported IPv6 address registrations per child.
  *
  */
 #define OPENTHREAD_CONFIG_MLE_IP_ADDRS_PER_CHILD 10

 /**
  * @def OPENTHREAD_CONFIG_IP6_MAX_EXT_UCAST_ADDRS
  *
  * The maximum number of supported IPv6 addresses allows to be externally added.
  *
  */
 #define OPENTHREAD_CONFIG_IP6_MAX_EXT_UCAST_ADDRS 8

 /**
  * @def OPENTHREAD_CONFIG_IP6_MAX_EXT_MCAST_ADDRS
  *
  * The maximum number of supported IPv6 multicast addresses allows to be externally added.
  *
  */
 #define OPENTHREAD_CONFIG_IP6_MAX_EXT_MCAST_ADDRS 4

 /**
  * @def OPENTHREAD_CONFIG_MAC_FILTER_ENABLE
  *
  * Define to 1 to enable MAC filter support.
  *
  */
 #define OPENTHREAD_CONFIG_MAC_FILTER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_MAC_FILTER_SIZE
  *
  * The number of MAC Filter entries.
  *
  */
 #define OPENTHREAD_CONFIG_MAC_FILTER_SIZE 80

 /**
  * @def OPENTHREAD_CONFIG_LOG_LEVEL
  *
  * The log level (used at compile time).
  *
  */
 #define OPENTHREAD_CONFIG_LOG_LEVEL OT_LOG_LEVEL_INFO

 /**
  * @def OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
  *
  * Define as 1 to enable dynamic log level control.
  *
  */
 #define OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME
  *
  * Define as 1 to prepend the current uptime to all log messages.
  *
  */
 #define OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME 1

 /**
  * @def OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL
  *
  * Define to prepend the log level to all log messages
  *
  */
 #define OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL 1

 /**
  * @def OPENTHREAD_CONFIG_LOG_SUFFIX
  *
  * Define suffix to append at the end of logs.
  *
  */
 #define OPENTHREAD_CONFIG_LOG_SUFFIX ""

 /**
  * @def OPENTHREAD_CONFIG_LOG_PLATFORM
  *
  * Define to enable platform region logging.
  *
  */
 #define OPENTHREAD_CONFIG_LOG_PLATFORM 1

 /**
  * @def OPENTHREAD_CONFIG_NCP_HDLC_ENABLE
  *
  * Define to 1 to enable NCP HDLC support.
  *
  */
 #define OPENTHREAD_CONFIG_NCP_HDLC_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE
  *
  *  The size of NCP message buffer in bytes
  *
  */
 #define OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE 4096

 /**
  * @def OPENTHREAD_CONFIG_MLE_STEERING_DATA_SET_OOB_ENABLE
  *
  * Enable setting steering data out of band.
  *
  */
 #define OPENTHREAD_CONFIG_MLE_STEERING_DATA_SET_OOB_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH
  *
  * Define as 1 for a child to inform its previous parent when it attaches to a new parent.
  *
  * If this feature is enabled, when a device attaches to a new parent, it will send an IP message (with empty payload
  * and mesh-local IP address as the source address) to its previous parent.
  *
  */
 #define OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH 1

 /**
  * @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE
  *
  * Define as 1 to enable Channel Manager support.
  *
  */
 #define OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE
  *
  * Define as 1 to enable Channel Monitor support.
  *
  */
 #define OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_MINIMUM_DELAY
  *
  * The minimum delay in seconds used by Channel Manager module for performing a channel change.
  *
  * The minimum delay should preferably be longer than maximum data poll interval used by all sleepy-end-devices within
  * the Thread network.
  *
  * Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
  *
  */
 #define OPENTHREAD_CONFIG_CHANNEL_MANAGER_MINIMUM_DELAY 2

 /**
  * @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_SKIP_FAVORED
  *
  * This threshold specifies the minimum occupancy rate difference between two channels for the Channel Manager to
  * prefer an unfavored channel over the best favored one. This is used when (auto) selecting a channel based on the
  * collected channel quality data by "channel monitor" feature.
  *
  * The difference is based on the `ChannelMonitor::GetChannelOccupancy()` definition which provides the average
  * percentage of RSSI samples (within a time window) indicating that channel was busy (i.e., RSSI value higher than
  * a threshold). Value 0 maps to 0% and 0xffff maps to 100%.
  *
  * Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
  *
  */
 #define OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_SKIP_FAVORED (0xffff * 7 / 100)

 /**
  * @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_CHANGE_CHANNEL
  *
  * This threshold specifies the minimum occupancy rate difference required between the current channel and a newly
  * selected channel for Channel Manager to allow channel change to the new channel.
  *
  * The difference is based on the `ChannelMonitor::GetChannelOccupancy()` definition which provides the average
  * percentage of RSSI samples (within a time window) indicating that channel was busy (i.e., RSSI value higher than
  * a threshold). Value 0 maps to 0% rate and 0xffff maps to 100%.
  *
  * Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
  *
  */
 #define OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_CHANGE_CHANNEL (0xffff * 10 / 100)

 /**
  * @def OPENTHREAD_CONFIG_CHILD_SUPERVISION_ENABLE
  *
  * Define to 1 to enable Child Supervision support.
  *
  */
 #define OPENTHREAD_CONFIG_CHILD_SUPERVISION_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_TMF_PENDING_DATASET_MINIMUM_DELAY
  *
  * Minimum Delay Timer value for a Pending Operational Dataset (in ms).
  *
  * Thread specification defines this value as 30,000. Changing from the specified value should be done for testing only.
  *
  * For `toranj` test script the value is decreased so that the tests can be run faster.
  *
  */
 #define OPENTHREAD_CONFIG_TMF_PENDING_DATASET_MINIMUM_DELAY 1000

 /**
  * @def OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL
  *
  * Define to 1 to enable support controlling of desired power state of NCP's micro-controller.
  *
  * The power state specifies the desired power state of NCP's micro-controller (MCU) when the underlying platform's
  * operating system enters idle mode (i.e., all active tasks/events are processed and the MCU can potentially enter a
  * energy-saving power state).
  *
  * The power state primarily determines how the host should interact with the NCP and whether the host needs an
  * external trigger (a "poke") before it can communicate with the NCP or not.
  *
  * When enabled, the platform is expected to provide `otPlatSetMcuPowerState()` and `otPlatGetMcuPowerState()`
  * functions (please see `openthread/platform/misc.h`). Host can then control the power state using
  * `SPINEL_PROP_MCU_POWER_STATE`.
  *
  */
 #define OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL 1

 /**
  * @def OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE
  *
  * Define as 1 to enable support for adding of auto-configured SLAAC addresses by OpenThread.
  *
  */
 #define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE
  *
  * Define to 1 to enable DNS Client support.
  *
  */
 #define OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE
  *
  * Define to 1 to enable SRP Client support.
  *
  */
 #define OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_SRP_SERVER_ENABLE
  *
  * Define to 1 to enable SRP Server support.
  *
  */
 #define OPENTHREAD_CONFIG_SRP_SERVER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_CHANGE_ENABLE
  *
  * Define to 1 for the SRP client implementation to provides APIs to allow domain name to be set/changed.
  *
  */
 #define OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_API_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE
  *
  * Define as 1 to enable History Tracker module.
  *
  */
 #define OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE
  *
  * Define to 1 to enable DNS-SD Server support.
  *
  */
 #define OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_ENABLE
  *
  * Define to 1 to enable delay-aware queue management for the send queue.
  *
  */
 #define OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_ENABLE 1

 #if OPENTHREAD_RADIO
 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE
  *
  * Define to 1 if you want to enable software ACK timeout logic.
  *
  */
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE
  *
  * Define to 1 if you want to enable software retransmission logic.
  *
  */
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
  *
  * Define to 1 if you want to enable software CSMA-CA backoff logic.
  *
  */
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE
  *
  * Define to 1 if you want to enable software transmission security logic.
  *
  */
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE 1

 /**
  * @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE
  *
  * Define to 1 to enable software transmission target time logic.
  *
  */
 #define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE 1
 #endif // OPENTHREAD_RADIO
	/*
	* Copyright (c) 2018, The OpenThread Authors.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. Neither the name of the copyright holder nor the
	* names of its contributors may be used to endorse or promote products
	* derived from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
	* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
	* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
	* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
	* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
	* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
	* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
	* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
	* POSSIBILITY OF SUCH DAMAGE.
	*/

	/**
	* This header file defines the OpenThread core configuration options used in NCP build for `toranj` test framework.
	*
	*/

	#if !defined(OPENTHREAD_CORE_TORANJ_CONFIG_SIMULATION_H_) && !defined(OPENTHREAD_CORE_TORANJ_CONFIG_POSIX_H_)
	#error "This header file should only be included through the platform-specific one"
	#endif

	#ifndef OPENTHREAD_RADIO
	#define OPENTHREAD_RADIO 0
	#endif

	#ifndef OPENTHREAD_RADIO
	#define OPENTHREAD_RADIO_CLI 0
	#endif

	/**
	* @def OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE
	*
	* Define to 1 to enable Thread Test Harness reference device support.
	*
	*/
	#define OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_UPTIME_ENABLE
	*
	* Define to 1 to enable tracking the uptime of OpenThread instance.
	*
	*/
	#define OPENTHREAD_CONFIG_UPTIME_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE
	*
	* Define to 1 to enable Border Router support.
	*
	*/
	#define OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE
	*
	* Define to 1 to enable Border Routing support.
	*
	*/
	#define OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_COMMISSIONER_ENABLE
	*
	* Define to 1 to enable Commissioner support.
	*
	*/
	#define OPENTHREAD_CONFIG_COMMISSIONER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES
	*
	* The maximum number of Joiner entries maintained by the Commissioner.
	*
	*/
	#define OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES 4

	/**
	* @def OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE
	*
	* Define to 1 to enable Border Agent support.
	*
	*/
	#define OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_DIAG_ENABLE
	*
	* Define to 1 to enable Factory Diagnostics support.
	*
	*/
	#define OPENTHREAD_CONFIG_DIAG_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_JOINER_ENABLE
	*
	* Define to 1 to enable Joiner support.
	*
	*/
	#define OPENTHREAD_CONFIG_JOINER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE
	*
	* Define to 1 to support injecting Service entries into the Thread Network Data.
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE
	*
	* Define to 1 to enable Network Data Publisher.
	*
	*/
	#define OPENTHREAD_CONFIG_NETDATA_PUBLISHER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE
	*
	* Define to 1 to enable TMF anycast locator functionality.
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_ANYCAST_LOCATOR_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_LEGACY_ENABLE
	*
	* Define to 1 to enable legacy network support.
	*
	*/
	#define OPENTHREAD_CONFIG_LEGACY_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_ECDSA_ENABLE
	*
	* Define to 1 to enable ECDSA support.
	*
	*/
	#define OPENTHREAD_CONFIG_ECDSA_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE
	*
	* Define to 1 to enable the Jam Detection service.
	*
	*/
	#define OPENTHREAD_CONFIG_JAM_DETECTION_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS
	*
	* The number of message buffers in the buffer pool.
	*
	*/
	#define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS 256

	/**
	* @def OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE
	*
	* Whether use heap allocator for message buffers.
	*
	*/
	#define OPENTHREAD_CONFIG_MESSAGE_USE_HEAP_ENABLE 0

	/**
	* @def OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES
	*
	* The number of EID-to-RLOC cache entries.
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES 16

	/**
	* @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT
	*
	* The timeout value (in seconds) waiting for a address notification response after sending an address query.
	*
	* Default: 3 seconds
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT 6

	/**
	* @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY
	*
	* Initial retry delay for address query (in seconds).
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY 4

	/**
	* @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY
	*
	* Maximum retry delay for address query (in seconds).
	*
	* Default: 28800 seconds (480 minutes or 8 hours)
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY 120

	/**
	* @def OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_MAX_SNOOP_ENTRIES
	*
	* The maximum number of EID-to-RLOC cache entries that can be uses for "snoop optimization" where an entry is created
	* by inspecting a received message.
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_MAX_SNOOP_ENTRIES 2

	/**
	* @def OPENTHREAD_CONFIG_TMF_SNOOP_CACHE_ENTRY_TIMEOUT
	*
	* The timeout value (in seconds) blocking eviction of an address cache entry created through snoop optimization (i.e.,
	* inspection of a received message). After the timeout expires the entry can be reclaimed again. This timeout allows
	* a longer response delay for a received message giving more chance that a snooped entry will be used (avoiding
	* sending Address Query when a response message is sent to same destination from which the message was received
	* earlier).
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_SNOOP_CACHE_ENTRY_TIMEOUT 3

	/**
	* @def OPENTHREAD_CONFIG_MLE_MAX_CHILDREN
	*
	* The maximum number of children.
	*
	*/
	#define OPENTHREAD_CONFIG_MLE_MAX_CHILDREN 32

	/**
	* @def OPENTHREAD_CONFIG_MLE_CHILD_TIMEOUT_DEFAULT
	*
	* The default child timeout value (in seconds).
	*
	*/
	#define OPENTHREAD_CONFIG_MLE_CHILD_TIMEOUT_DEFAULT 120

	/**
	* @def OPENTHREAD_CONFIG_MLE_IP_ADDRS_PER_CHILD
	*
	* The maximum number of supported IPv6 address registrations per child.
	*
	*/
	#define OPENTHREAD_CONFIG_MLE_IP_ADDRS_PER_CHILD 10

	/**
	* @def OPENTHREAD_CONFIG_IP6_MAX_EXT_UCAST_ADDRS
	*
	* The maximum number of supported IPv6 addresses allows to be externally added.
	*
	*/
	#define OPENTHREAD_CONFIG_IP6_MAX_EXT_UCAST_ADDRS 8

	/**
	* @def OPENTHREAD_CONFIG_IP6_MAX_EXT_MCAST_ADDRS
	*
	* The maximum number of supported IPv6 multicast addresses allows to be externally added.
	*
	*/
	#define OPENTHREAD_CONFIG_IP6_MAX_EXT_MCAST_ADDRS 4

	/**
	* @def OPENTHREAD_CONFIG_MAC_FILTER_ENABLE
	*
	* Define to 1 to enable MAC filter support.
	*
	*/
	#define OPENTHREAD_CONFIG_MAC_FILTER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_MAC_FILTER_SIZE
	*
	* The number of MAC Filter entries.
	*
	*/
	#define OPENTHREAD_CONFIG_MAC_FILTER_SIZE 80

	/**
	* @def OPENTHREAD_CONFIG_LOG_LEVEL
	*
	* The log level (used at compile time).
	*
	*/
	#define OPENTHREAD_CONFIG_LOG_LEVEL OT_LOG_LEVEL_INFO

	/**
	* @def OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE
	*
	* Define as 1 to enable dynamic log level control.
	*
	*/
	#define OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME
	*
	* Define as 1 to prepend the current uptime to all log messages.
	*
	*/
	#define OPENTHREAD_CONFIG_LOG_PREPEND_UPTIME 1

	/**
	* @def OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL
	*
	* Define to prepend the log level to all log messages
	*
	*/
	#define OPENTHREAD_CONFIG_LOG_PREPEND_LEVEL 1

	/**
	* @def OPENTHREAD_CONFIG_LOG_SUFFIX
	*
	* Define suffix to append at the end of logs.
	*
	*/
	#define OPENTHREAD_CONFIG_LOG_SUFFIX ""

	/**
	* @def OPENTHREAD_CONFIG_LOG_PLATFORM
	*
	* Define to enable platform region logging.
	*
	*/
	#define OPENTHREAD_CONFIG_LOG_PLATFORM 1

	/**
	* @def OPENTHREAD_CONFIG_NCP_HDLC_ENABLE
	*
	* Define to 1 to enable NCP HDLC support.
	*
	*/
	#define OPENTHREAD_CONFIG_NCP_HDLC_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE
	*
	* The size of NCP message buffer in bytes
	*
	*/
	#define OPENTHREAD_CONFIG_NCP_TX_BUFFER_SIZE 4096

	/**
	* @def OPENTHREAD_CONFIG_MLE_STEERING_DATA_SET_OOB_ENABLE
	*
	* Enable setting steering data out of band.
	*
	*/
	#define OPENTHREAD_CONFIG_MLE_STEERING_DATA_SET_OOB_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH
	*
	* Define as 1 for a child to inform its previous parent when it attaches to a new parent.
	*
	* If this feature is enabled, when a device attaches to a new parent, it will send an IP message (with empty payload
	* and mesh-local IP address as the source address) to its previous parent.
	*
	*/
	#define OPENTHREAD_CONFIG_MLE_INFORM_PREVIOUS_PARENT_ON_REATTACH 1

	/**
	* @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE
	*
	* Define as 1 to enable Channel Manager support.
	*
	*/
	#define OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE
	*
	* Define as 1 to enable Channel Monitor support.
	*
	*/
	#define OPENTHREAD_CONFIG_CHANNEL_MONITOR_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_MINIMUM_DELAY
	*
	* The minimum delay in seconds used by Channel Manager module for performing a channel change.
	*
	* The minimum delay should preferably be longer than maximum data poll interval used by all sleepy-end-devices within
	* the Thread network.
	*
	* Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
	*
	*/
	#define OPENTHREAD_CONFIG_CHANNEL_MANAGER_MINIMUM_DELAY 2

	/**
	* @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_SKIP_FAVORED
	*
	* This threshold specifies the minimum occupancy rate difference between two channels for the Channel Manager to
	* prefer an unfavored channel over the best favored one. This is used when (auto) selecting a channel based on the
	* collected channel quality data by "channel monitor" feature.
	*
	* The difference is based on the `ChannelMonitor::GetChannelOccupancy()` definition which provides the average
	* percentage of RSSI samples (within a time window) indicating that channel was busy (i.e., RSSI value higher than
	* a threshold). Value 0 maps to 0% and 0xffff maps to 100%.
	*
	* Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
	*
	*/
	#define OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_SKIP_FAVORED (0xffff * 7 / 100)

	/**
	* @def OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_CHANGE_CHANNEL
	*
	* This threshold specifies the minimum occupancy rate difference required between the current channel and a newly
	* selected channel for Channel Manager to allow channel change to the new channel.
	*
	* The difference is based on the `ChannelMonitor::GetChannelOccupancy()` definition which provides the average
	* percentage of RSSI samples (within a time window) indicating that channel was busy (i.e., RSSI value higher than
	* a threshold). Value 0 maps to 0% rate and 0xffff maps to 100%.
	*
	* Applicable only if Channel Manager feature is enabled (i.e., `OPENTHREAD_CONFIG_CHANNEL_MANAGER_ENABLE` is set).
	*
	*/
	#define OPENTHREAD_CONFIG_CHANNEL_MANAGER_THRESHOLD_TO_CHANGE_CHANNEL (0xffff * 10 / 100)

	/**
	* @def OPENTHREAD_CONFIG_CHILD_SUPERVISION_ENABLE
	*
	* Define to 1 to enable Child Supervision support.
	*
	*/
	#define OPENTHREAD_CONFIG_CHILD_SUPERVISION_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_TMF_PENDING_DATASET_MINIMUM_DELAY
	*
	* Minimum Delay Timer value for a Pending Operational Dataset (in ms).
	*
	* Thread specification defines this value as 30,000. Changing from the specified value should be done for testing only.
	*
	* For `toranj` test script the value is decreased so that the tests can be run faster.
	*
	*/
	#define OPENTHREAD_CONFIG_TMF_PENDING_DATASET_MINIMUM_DELAY 1000

	/**
	* @def OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL
	*
	* Define to 1 to enable support controlling of desired power state of NCP's micro-controller.
	*
	* The power state specifies the desired power state of NCP's micro-controller (MCU) when the underlying platform's
	* operating system enters idle mode (i.e., all active tasks/events are processed and the MCU can potentially enter a
	* energy-saving power state).
	*
	* The power state primarily determines how the host should interact with the NCP and whether the host needs an
	* external trigger (a "poke") before it can communicate with the NCP or not.
	*
	* When enabled, the platform is expected to provide `otPlatSetMcuPowerState()` and `otPlatGetMcuPowerState()`
	* functions (please see `openthread/platform/misc.h`). Host can then control the power state using
	* `SPINEL_PROP_MCU_POWER_STATE`.
	*
	*/
	#define OPENTHREAD_CONFIG_NCP_ENABLE_MCU_POWER_STATE_CONTROL 1

	/**
	* @def OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE
	*
	* Define as 1 to enable support for adding of auto-configured SLAAC addresses by OpenThread.
	*
	*/
	#define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE
	*
	* Define to 1 to enable DNS Client support.
	*
	*/
	#define OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE
	*
	* Define to 1 to enable SRP Client support.
	*
	*/
	#define OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_SRP_SERVER_ENABLE
	*
	* Define to 1 to enable SRP Server support.
	*
	*/
	#define OPENTHREAD_CONFIG_SRP_SERVER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_CHANGE_ENABLE
	*
	* Define to 1 for the SRP client implementation to provides APIs to allow domain name to be set/changed.
	*
	*/
	#define OPENTHREAD_CONFIG_SRP_CLIENT_DOMAIN_NAME_API_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE
	*
	* Define as 1 to enable History Tracker module.
	*
	*/
	#define OPENTHREAD_CONFIG_HISTORY_TRACKER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE
	*
	* Define to 1 to enable DNS-SD Server support.
	*
	*/
	#define OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_ENABLE
	*
	* Define to 1 to enable delay-aware queue management for the send queue.
	*
	*/
	#define OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_ENABLE 1

	#if OPENTHREAD_RADIO
	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE
	*
	* Define to 1 if you want to enable software ACK timeout logic.
	*
	*/
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_ACK_TIMEOUT_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE
	*
	* Define to 1 if you want to enable software retransmission logic.
	*
	*/
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_RETRANSMIT_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE
	*
	* Define to 1 if you want to enable software CSMA-CA backoff logic.
	*
	*/
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_CSMA_BACKOFF_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE
	*
	* Define to 1 if you want to enable software transmission security logic.
	*
	*/
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_SECURITY_ENABLE 1

	/**
	* @def OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE
	*
	* Define to 1 to enable software transmission target time logic.
	*
	*/
	#define OPENTHREAD_CONFIG_MAC_SOFTWARE_TX_TIMING_ENABLE 1
	#endif // OPENTHREAD_RADIO