| #ifndef HAL_CONFIG_H |
| #define HAL_CONFIG_H |
| |
| #include "em_device.h" |
| #include "hal-config-types.h" |
| |
| // This file is auto-generated by Hardware Configurator in Simplicity Studio. |
| // Any content between $[ and ]$ will be replaced whenever the file is regenerated. |
| // Content outside these regions will be preserved. |
| |
| // $[ACMP0] |
| // [ACMP0]$ |
| |
| // $[ACMP1] |
| // [ACMP1]$ |
| |
| // $[ADC0] |
| // [ADC0]$ |
| |
| // $[ANTDIV] |
| // [ANTDIV]$ |
| |
| // $[BATTERYMON] |
| // [BATTERYMON]$ |
| |
| // $[BTL_BUTTON] |
| // [BTL_BUTTON]$ |
| |
| // $[BULBPWM] |
| // [BULBPWM]$ |
| |
| // $[BULBPWM_COLOR] |
| // [BULBPWM_COLOR]$ |
| |
| // $[BUTTON] |
| #define BSP_BUTTON_PRESENT (1) |
| |
| #define BSP_BUTTON0_PIN (14U) |
| #define BSP_BUTTON0_PORT (gpioPortD) |
| |
| #define BSP_BUTTON1_PIN (15U) |
| #define BSP_BUTTON1_PORT (gpioPortD) |
| |
| #define BSP_BUTTON_COUNT (2U) |
| #define BSP_BUTTON_INIT { { BSP_BUTTON0_PORT, BSP_BUTTON0_PIN }, { BSP_BUTTON1_PORT, BSP_BUTTON1_PIN } } |
| #define BSP_BUTTON_GPIO_DOUT (HAL_GPIO_DOUT_LOW) |
| #define BSP_BUTTON_GPIO_MODE (HAL_GPIO_MODE_INPUT) |
| // [BUTTON]$ |
| |
| // $[CMU] |
| #define HAL_CLK_HFCLK_SOURCE (HAL_CLK_HFCLK_SOURCE_HFXO) |
| #define HAL_CLK_LFECLK_SOURCE (HAL_CLK_LFCLK_SOURCE_LFRCO) |
| #define HAL_CLK_LFBCLK_SOURCE (HAL_CLK_LFCLK_SOURCE_LFRCO) |
| #define BSP_CLK_LFXO_PRESENT (1) |
| #define BSP_CLK_HFXO_PRESENT (1) |
| #define BSP_CLK_LFXO_INIT CMU_LFXOINIT_DEFAULT |
| #define BSP_CLK_LFXO_CTUNE (0) |
| #define BSP_CLK_LFXO_FREQ (32768) |
| #define HAL_CLK_LFACLK_SOURCE (HAL_CLK_LFCLK_SOURCE_LFRCO) |
| #define BSP_CLK_HFXO_FREQ (38400000) |
| #define BSP_CLK_HFXO_CTUNE (338) |
| #define BSP_CLK_HFXO_INIT CMU_HFXOINIT_DEFAULT |
| #define BSP_CLK_HFXO_CTUNE_TOKEN (0) |
| #define HAL_CLK_HFXO_AUTOSTART (HAL_CLK_HFXO_AUTOSTART_NONE) |
| // [CMU]$ |
| |
| // $[COEX] |
| // [COEX]$ |
| |
| // $[CS5463] |
| // [CS5463]$ |
| |
| // $[CSEN0] |
| // [CSEN0]$ |
| |
| // $[DCDC] |
| #define BSP_DCDC_PRESENT (1) |
| |
| #define HAL_DCDC_BYPASS (0) |
| #define BSP_DCDC_INIT EMU_DCDCINIT_DEFAULT |
| // [DCDC]$ |
| |
| // $[EMU] |
| // [EMU]$ |
| |
| // $[EXTFLASH] |
| // [EXTFLASH]$ |
| |
| // $[EZRADIOPRO] |
| // [EZRADIOPRO]$ |
| |
| // $[GPIO] |
| #define PORTIO_GPIO_SWCLKTCK_PIN (0) |
| #define PORTIO_GPIO_SWCLKTCK_PORT (gpioPortF) |
| #define PORTIO_GPIO_DBGROUTE_LOC (0) |
| |
| #define PORTIO_GPIO_SWDIOTMS_PIN (1) |
| #define PORTIO_GPIO_SWDIOTMS_PORT (gpioPortF) |
| |
| #define PORTIO_GPIO_SWV_PIN (2) |
| #define PORTIO_GPIO_SWV_PORT (gpioPortF) |
| #define PORTIO_GPIO_SWV_LOC (0) |
| |
| #define PORTIO_GPIO_TCLK_PIN (8) |
| #define PORTIO_GPIO_TCLK_PORT (gpioPortF) |
| #define PORTIO_GPIO_TCLK_LOC (0) |
| |
| #define PORTIO_GPIO_TD0_PIN (9) |
| #define PORTIO_GPIO_TD0_PORT (gpioPortF) |
| #define PORTIO_GPIO_TD0_LOC (0) |
| |
| #define PORTIO_GPIO_TD1_PIN (10) |
| #define PORTIO_GPIO_TD1_PORT (gpioPortF) |
| #define PORTIO_GPIO_TD1_LOC (0) |
| |
| #define PORTIO_GPIO_TD2_PIN (11) |
| #define PORTIO_GPIO_TD2_PORT (gpioPortF) |
| #define PORTIO_GPIO_TD2_LOC (0) |
| |
| #define PORTIO_GPIO_TD3_PIN (12) |
| #define PORTIO_GPIO_TD3_PORT (gpioPortF) |
| #define PORTIO_GPIO_TD3_LOC (0) |
| |
| // [GPIO]$ |
| |
| // $[I2C0] |
| #define PORTIO_I2C0_SCL_PIN (10) |
| #define PORTIO_I2C0_SCL_PORT (gpioPortC) |
| #define PORTIO_I2C0_SCL_LOC (14) |
| |
| #define PORTIO_I2C0_SDA_PIN (11) |
| #define PORTIO_I2C0_SDA_PORT (gpioPortC) |
| #define PORTIO_I2C0_SDA_LOC (16) |
| |
| // [I2C0]$ |
| |
| // $[I2C1] |
| // [I2C1]$ |
| |
| // $[I2CSENSOR] |
| // [I2CSENSOR]$ |
| |
| // $[IDAC0] |
| // [IDAC0]$ |
| |
| // $[IOEXP] |
| // [IOEXP]$ |
| |
| // $[LED] |
| #define BSP_LED_PRESENT (1) |
| |
| #define BSP_LED0_PIN (8) |
| #define BSP_LED0_PORT (gpioPortD) |
| |
| #define BSP_LED1_PIN (9) |
| #define BSP_LED1_PORT (gpioPortD) |
| |
| #define HAL_LED_ENABLE { 0, 1 } |
| #define HAL_LED_COUNT (2) |
| #define BSP_LED_COUNT (2) |
| #define BSP_LED_INIT { { BSP_LED0_PORT, BSP_LED0_PIN }, { BSP_LED1_PORT, BSP_LED1_PIN } } |
| // [LED]$ |
| |
| // $[LESENSE] |
| // [LESENSE]$ |
| |
| // $[LETIMER0] |
| // [LETIMER0]$ |
| |
| // $[LEUART0] |
| // [LEUART0]$ |
| |
| // $[LFXO] |
| // [LFXO]$ |
| |
| // $[LNA] |
| // [LNA]$ |
| |
| // $[PA] |
| #define HAL_PA_ENABLE (1) |
| |
| #define HAL_PA_RAMP (10) |
| #define HAL_PA_2P4_LOWPOWER (0) |
| #define HAL_PA_POWER (252) |
| #define HAL_PA_VOLTAGE (3300) |
| #define HAL_PA_CURVE_HEADER "pa_curves_efr32.h" |
| // [PA]$ |
| |
| // $[PCNT0] |
| // [PCNT0]$ |
| |
| // $[PCNT1] |
| // [PCNT1]$ |
| |
| // $[PCNT2] |
| // [PCNT2]$ |
| |
| // $[PORTIO] |
| // [PORTIO]$ |
| |
| // $[PRS] |
| #define PORTIO_PRS_CH4_PIN (13) |
| #define PORTIO_PRS_CH4_PORT (gpioPortD) |
| #define PORTIO_PRS_CH4_LOC (4) |
| |
| // [PRS]$ |
| |
| // $[PTI] |
| #define PORTIO_PTI_DFRAME_PIN (13) |
| #define PORTIO_PTI_DFRAME_PORT (gpioPortB) |
| #define PORTIO_PTI_DFRAME_LOC (6) |
| |
| #define PORTIO_PTI_DOUT_PIN (12) |
| #define PORTIO_PTI_DOUT_PORT (gpioPortB) |
| #define PORTIO_PTI_DOUT_LOC (6) |
| |
| #define HAL_PTI_ENABLE (1) |
| |
| #define BSP_PTI_DFRAME_PIN (13) |
| #define BSP_PTI_DFRAME_PORT (gpioPortB) |
| #define BSP_PTI_DFRAME_LOC (6) |
| |
| #define BSP_PTI_DOUT_PIN (12) |
| #define BSP_PTI_DOUT_PORT (gpioPortB) |
| #define BSP_PTI_DOUT_LOC (6) |
| |
| #define HAL_PTI_MODE (HAL_PTI_MODE_UART) |
| #define HAL_PTI_BAUD_RATE (1600000) |
| // [PTI]$ |
| |
| // $[PYD1698] |
| // [PYD1698]$ |
| |
| // $[SERIAL] |
| #define HAL_SERIAL_USART0_ENABLE (0) |
| #define HAL_SERIAL_LEUART0_ENABLE (0) |
| #define HAL_SERIAL_USART1_ENABLE (0) |
| #define HAL_SERIAL_USART2_ENABLE (0) |
| #define HAL_SERIAL_USART3_ENABLE (0) |
| #define HAL_SERIAL_RXWAKE_ENABLE (0) |
| #define BSP_SERIAL_APP_CTS_PIN (2) |
| #define BSP_SERIAL_APP_CTS_PORT (gpioPortA) |
| #define BSP_SERIAL_APP_CTS_LOC (30) |
| |
| #define BSP_SERIAL_APP_RX_PIN (1) |
| #define BSP_SERIAL_APP_RX_PORT (gpioPortA) |
| #define BSP_SERIAL_APP_RX_LOC (0) |
| |
| #define BSP_SERIAL_APP_TX_PIN (0) |
| #define BSP_SERIAL_APP_TX_PORT (gpioPortA) |
| #define BSP_SERIAL_APP_TX_LOC (0) |
| |
| #define BSP_SERIAL_APP_RTS_PIN (3) |
| #define BSP_SERIAL_APP_RTS_PORT (gpioPortA) |
| #define BSP_SERIAL_APP_RTS_LOC (30) |
| |
| #define HAL_SERIAL_APP_RX_QUEUE_SIZE (128) |
| #define HAL_SERIAL_APP_BAUD_RATE (115200) |
| #define HAL_SERIAL_APP_RXSTOP (16) |
| #define HAL_SERIAL_APP_RXSTART (16) |
| #define HAL_SERIAL_APP_TX_QUEUE_SIZE (128) |
| #define HAL_SERIAL_APP_FLOW_CONTROL (HAL_USART_FLOW_CONTROL_NONE) |
| // [SERIAL]$ |
| |
| // $[SPIDISPLAY] |
| // [SPIDISPLAY]$ |
| |
| // $[SPINCP] |
| // [SPINCP]$ |
| |
| // $[TIMER0] |
| // [TIMER0]$ |
| |
| // $[TIMER1] |
| // [TIMER1]$ |
| |
| // $[UARTNCP] |
| // [UARTNCP]$ |
| |
| // $[USART0] |
| #define PORTIO_USART0_CTS_PIN (2) |
| #define PORTIO_USART0_CTS_PORT (gpioPortA) |
| #define PORTIO_USART0_CTS_LOC (30) |
| |
| #define PORTIO_USART0_RTS_PIN (3) |
| #define PORTIO_USART0_RTS_PORT (gpioPortA) |
| #define PORTIO_USART0_RTS_LOC (30) |
| |
| #define PORTIO_USART0_RX_PIN (1) |
| #define PORTIO_USART0_RX_PORT (gpioPortA) |
| #define PORTIO_USART0_RX_LOC (0) |
| |
| #define PORTIO_USART0_TX_PIN (0) |
| #define PORTIO_USART0_TX_PORT (gpioPortA) |
| #define PORTIO_USART0_TX_LOC (0) |
| |
| #define HAL_USART0_ENABLE (1) |
| |
| #define BSP_USART0_CTS_PIN (2) |
| #define BSP_USART0_CTS_PORT (gpioPortA) |
| #define BSP_USART0_CTS_LOC (30) |
| |
| #define BSP_USART0_RX_PIN (1) |
| #define BSP_USART0_RX_PORT (gpioPortA) |
| #define BSP_USART0_RX_LOC (0) |
| |
| #define BSP_USART0_TX_PIN (0) |
| #define BSP_USART0_TX_PORT (gpioPortA) |
| #define BSP_USART0_TX_LOC (0) |
| |
| #define BSP_USART0_RTS_PIN (3) |
| #define BSP_USART0_RTS_PORT (gpioPortA) |
| #define BSP_USART0_RTS_LOC (30) |
| |
| #define HAL_USART0_RX_QUEUE_SIZE (128) |
| #define HAL_USART0_BAUD_RATE (115200) |
| #define HAL_USART0_RXSTOP (16) |
| #define HAL_USART0_RXSTART (16) |
| #define HAL_USART0_TX_QUEUE_SIZE (128) |
| #define HAL_USART0_FLOW_CONTROL (HAL_USART_FLOW_CONTROL_NONE) |
| // [USART0]$ |
| |
| // $[USART1] |
| #define PORTIO_USART1_CLK_PIN (8) |
| #define PORTIO_USART1_CLK_PORT (gpioPortC) |
| #define PORTIO_USART1_CLK_LOC (11) |
| |
| #define PORTIO_USART1_CS_PIN (9) |
| #define PORTIO_USART1_CS_PORT (gpioPortC) |
| #define PORTIO_USART1_CS_LOC (11) |
| |
| #define PORTIO_USART1_RX_PIN (7) |
| #define PORTIO_USART1_RX_PORT (gpioPortC) |
| #define PORTIO_USART1_RX_LOC (11) |
| |
| #define PORTIO_USART1_TX_PIN (6) |
| #define PORTIO_USART1_TX_PORT (gpioPortC) |
| #define PORTIO_USART1_TX_LOC (11) |
| |
| // [USART1]$ |
| |
| // $[USART2] |
| #define PORTIO_USART2_CLK_PIN (8) |
| #define PORTIO_USART2_CLK_PORT (gpioPortA) |
| #define PORTIO_USART2_CLK_LOC (1) |
| |
| #define PORTIO_USART2_CS_PIN (9) |
| #define PORTIO_USART2_CS_PORT (gpioPortA) |
| #define PORTIO_USART2_CS_LOC (1) |
| |
| #define PORTIO_USART2_RX_PIN (7) |
| #define PORTIO_USART2_RX_PORT (gpioPortA) |
| #define PORTIO_USART2_RX_LOC (1) |
| |
| #define PORTIO_USART2_TX_PIN (6) |
| #define PORTIO_USART2_TX_PORT (gpioPortA) |
| #define PORTIO_USART2_TX_LOC (1) |
| |
| // [USART2]$ |
| |
| // $[USART3] |
| #define PORTIO_USART3_CTS_PIN (8) |
| #define PORTIO_USART3_CTS_PORT (gpioPortD) |
| #define PORTIO_USART3_CTS_LOC (28) |
| |
| #define PORTIO_USART3_RTS_PIN (9) |
| #define PORTIO_USART3_RTS_PORT (gpioPortD) |
| #define PORTIO_USART3_RTS_LOC (28) |
| |
| #define PORTIO_USART3_RX_PIN (7) |
| #define PORTIO_USART3_RX_PORT (gpioPortB) |
| #define PORTIO_USART3_RX_LOC (10) |
| |
| #define PORTIO_USART3_TX_PIN (6) |
| #define PORTIO_USART3_TX_PORT (gpioPortB) |
| #define PORTIO_USART3_TX_LOC (10) |
| |
| // [USART3]$ |
| |
| // $[VCOM] |
| // [VCOM]$ |
| |
| // $[VDAC0] |
| // [VDAC0]$ |
| |
| // $[VUART] |
| // [VUART]$ |
| |
| // $[WDOG] |
| // [WDOG]$ |
| |
| // $[WTIMER0] |
| // [WTIMER0]$ |
| |
| // $[WTIMER1] |
| // [WTIMER1]$ |
| |
| #endif /* HAL_CONFIG_H */ |
| |
