- (djm) Add back radix.o (used by AFS support), after it went missing from
Makefile many moons ago
- (djm) Apply "owl-always-auth" patch from Openwall/Solar Designer
- (djm) Fix blibpath specification for AIX/gcc
- (djm) Some systems have basename in -lgen. Fix from ayamura@ayamura.org
diff --git a/CREDITS b/CREDITS
index 0c86684..8d7b8a4 100644
--- a/CREDITS
+++ b/CREDITS
@@ -5,7 +5,7 @@
Alain St-Denis <Alain.St-Denis@ec.gc.ca> - Irix fix
Alexandre Oliva <oliva@lsd.ic.unicamp.br> - AIX fixes
-Andre Lucas <andre.lucas@dial.pipex.com> - new login code, many fixes
+Andre Lucas <andre@ae-35.com> - new login code, many fixes
Andreas Steinmetz <ast@domdv.de> - Shadow password expiry support
Andrew McGill <andrewm@datrix.co.za> - SCO fixes
Andrew Morgan <morgan@transmeta.com> - PAM bugfixes
@@ -91,5 +91,5 @@
Damien Miller <djm@mindrot.org>
-$Id: CREDITS,v 1.67 2002/07/28 20:31:19 stevesk Exp $
+$Id: CREDITS,v 1.67.6.1 2003/04/29 09:12:07 djm Exp $
diff --git a/ChangeLog b/ChangeLog
index 3959098..6ccc4d4 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,56 +1,9 @@
-20030428
- - (bal) [defines.h progressmeter.c scp.c] Some more culling of non 64bit
- hacked code.
-
-20030427
- - (bal) Bug #541: return; was dropped by mistake. Reported by
- furrier@iglou.com
- - (bal) Since we don't support platforms lacking u_int_64. We may
- as well clean out some of those evil #ifdefs
- - (bal) auth1.c minor resync while looking at the code.
- - (bal) auth2.c same changed as above.
-
-20030409
- - (djm) Bug #539: Specify creation mode with O_CREAT for lastlog. Report
- from matth@eecs.berkeley.edu
- - (djm) Make the spec work with Redhat 9.0 (which renames sharutils)
- - (djm) OpenBSD CVS Sync
- - markus@cvs.openbsd.org 2003/04/02 09:48:07
- [clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
- [readconf.h serverloop.c sshconnect2.c]
- reapply rekeying chage, tested by henning@, ok djm@
- - markus@cvs.openbsd.org 2003/04/02 14:36:26
- [ssh-keysign.c]
- potential segfault if KEY_UNSPEC; cjwatson@debian.org; bug #526
- - itojun@cvs.openbsd.org 2003/04/03 07:25:27
- [progressmeter.c]
- $OpenBSD$
- - itojun@cvs.openbsd.org 2003/04/03 10:17:35
- [progressmeter.c]
- remove $OpenBSD$, as other *.c does not have it.
- - markus@cvs.openbsd.org 2003/04/07 08:29:57
- [monitor_wrap.c]
- typo: get correct counters; introduced during rekeying change.
- - millert@cvs.openbsd.org 2003/04/07 21:58:05
- [progressmeter.c]
- The UCB copyright here is incorrect. This code did not originate
- at UCB, it was written by Luke Mewburn. Updated the copyright at
- the author's request. markus@ OK
- - itojun@cvs.openbsd.org 2003/04/08 20:21:29
- [*.c *.h]
- rename log() into logit() to avoid name conflict. markus ok, from
- netbsd
- - (djm) XXX - Performed locally using:
- "perl -p -i -e 's/(\s|^)log\(/$1logit\(/g' *.c *.h"
- - hin@cvs.openbsd.org 2003/04/09 08:23:52
- [servconf.c]
- Don't include <krb.h> when compiling with Kerberos 5 support
- - (djm) Fix up missing include for packet.c
- - (djm) Fix missed log => logit occurance (reference by function pointer)
-
-20030402
- - (bal) if IP_TOS is not found or broken don't try to compile in
- packet_set_tos() function call. bug #527
+20030429
+ - (djm) Add back radix.o (used by AFS support), after it went missing from
+ Makefile many moons ago
+ - (djm) Apply "owl-always-auth" patch from Openwall/Solar Designer
+ - (djm) Fix blibpath specification for AIX/gcc
+ - (djm) Some systems have basename in -lgen. Fix from ayamura@ayamura.org
20030401
- (djm) OpenBSD CVS Sync
@@ -1349,4 +1302,4 @@
save auth method before monitor_reset_key_state(); bugzilla bug #284;
ok provos@
-$Id: ChangeLog,v 1.2663 2003/04/28 23:30:43 mouring Exp $
+$Id: ChangeLog,v 1.2648.2.1 2003/04/29 09:12:07 djm Exp $
diff --git a/Makefile.in b/Makefile.in
index 6702eb9..39bbf34 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,4 +1,4 @@
-# $Id: Makefile.in,v 1.228 2003/03/21 00:34:34 mouring Exp $
+# $Id: Makefile.in,v 1.228.2.1 2003/04/29 09:12:08 djm Exp $
# uncomment if you run a non bourne compatable shell. Ie. csh
#SHELL = @SH@
@@ -62,7 +62,7 @@
LIBSSH_OBJS=authfd.o authfile.o bufaux.o buffer.o canohost.o channels.o \
cipher.o compat.o compress.o crc32.o deattack.o fatal.o \
- hostfile.o log.o match.o mpaux.o nchan.o packet.o readpass.o \
+ hostfile.o log.o match.o mpaux.o nchan.o packet.o radix.o readpass.o \
rsa.o tildexpand.o ttymodes.o xmalloc.o atomicio.o \
key.o dispatch.o kex.o mac.o uuencode.o misc.o \
rijndael.o ssh-dss.o ssh-rsa.o dh.o kexdh.o kexgex.o \
diff --git a/auth-pam.c b/auth-pam.c
index b29444e..cb57ba1 100644
--- a/auth-pam.c
+++ b/auth-pam.c
@@ -38,7 +38,7 @@
extern int use_privsep;
-RCSID("$Id: auth-pam.c,v 1.56 2003/04/09 10:59:48 djm Exp $");
+RCSID("$Id: auth-pam.c,v 1.55.4.1 2003/04/29 09:12:08 djm Exp $");
#define NEW_AUTHTOK_MSG \
"Warning: Your password has expired, please change it now."
@@ -182,7 +182,7 @@
if (__pamh && session_opened) {
pam_retval = pam_close_session(__pamh, 0);
if (pam_retval != PAM_SUCCESS)
- logit("Cannot close PAM session[%d]: %.200s",
+ log("Cannot close PAM session[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
}
@@ -196,12 +196,12 @@
if (__pamh) {
pam_retval = pam_end(__pamh, pam_retval);
if (pam_retval != PAM_SUCCESS)
- logit("Cannot release PAM authentication[%d]: %.200s",
+ log("Cannot release PAM authentication[%d]: %.200s",
pam_retval, PAM_STRERROR(__pamh, pam_retval));
}
}
-/* Attempt password authentation using PAM */
+/* Attempt password authentication using PAM */
int auth_pam_password(Authctxt *authctxt, const char *password)
{
extern ServerOptions options;
@@ -215,13 +215,13 @@
pamstate = INITIAL_LOGIN;
pam_retval = do_pam_authenticate(
options.permit_empty_passwd == 0 ? PAM_DISALLOW_NULL_AUTHTOK : 0);
- if (pam_retval == PAM_SUCCESS) {
- debug("PAM Password authentication accepted for "
- "user \"%.100s\"", pw->pw_name);
+ if (pam_retval == PAM_SUCCESS && pw) {
+ debug("PAM password authentication accepted for "
+ "%.100s", pw->pw_name);
return 1;
} else {
- debug("PAM Password authentication for \"%.100s\" "
- "failed[%d]: %s", pw->pw_name, pam_retval,
+ debug("PAM password authentication failed for "
+ "%.100s: %s", pw ? pw->pw_name : "an illegal user",
PAM_STRERROR(__pamh, pam_retval));
return 0;
}
@@ -261,7 +261,7 @@
break;
#endif
default:
- logit("PAM rejected by account configuration[%d]: "
+ log("PAM rejected by account configuration[%d]: "
"%.200s", pam_retval, PAM_STRERROR(__pamh,
pam_retval));
return(0);
diff --git a/auth-passwd.c b/auth-passwd.c
index 9901d48..62ea3a5 100644
--- a/auth-passwd.c
+++ b/auth-passwd.c
@@ -93,6 +93,7 @@
auth_password(Authctxt *authctxt, const char *password)
{
struct passwd * pw = authctxt->pw;
+ int ok = authctxt->valid;
#if !defined(USE_PAM) && !defined(HAVE_OSF_SIA)
char *encrypted_password;
char *pw_password;
@@ -115,19 +116,23 @@
/* deny if no user. */
if (pw == NULL)
- return 0;
+ ok = 0;
#ifndef HAVE_CYGWIN
- if (pw->pw_uid == 0 && options.permit_root_login != PERMIT_YES)
- return 0;
+ if (pw && pw->pw_uid == 0 && options.permit_root_login != PERMIT_YES)
+ ok = 0;
#endif
if (*password == '\0' && options.permit_empty_passwd == 0)
- return 0;
+ ok = 0;
#if defined(USE_PAM)
- return auth_pam_password(authctxt, password);
+ return auth_pam_password(authctxt, password) && ok;
#elif defined(HAVE_OSF_SIA)
+ if (!ok)
+ return 0;
return auth_sia_password(authctxt, password);
#else
+ if (!ok)
+ return 0;
# ifdef KRB5
if (options.kerberos_authentication == 1) {
int ret = auth_krb5_password(authctxt, password);
diff --git a/auth2-none.c b/auth2-none.c
index c07b2dd..692a296 100644
--- a/auth2-none.c
+++ b/auth2-none.c
@@ -100,7 +100,7 @@
if (check_nt_auth(1, authctxt->pw) == 0)
return(0);
#endif
- return (authctxt->valid ? PRIVSEP(auth_password(authctxt, "")) : 0);
+ return PRIVSEP(auth_password(authctxt, "")) && authctxt->valid;
}
Authmethod method_none = {
diff --git a/auth2-passwd.c b/auth2-passwd.c
index a8f1516..5026969 100644
--- a/auth2-passwd.c
+++ b/auth2-passwd.c
@@ -44,14 +44,14 @@
u_int len;
change = packet_get_char();
if (change)
- logit("password change not supported");
+ log("password change not supported");
password = packet_get_string(&len);
packet_check_eom();
- if (authctxt->valid &&
+ if (PRIVSEP(auth_password(authctxt, password)) == 1 && authctxt->valid
#ifdef HAVE_CYGWIN
- check_nt_auth(1, authctxt->pw) &&
+ && check_nt_auth(1, authctxt->pw)
#endif
- PRIVSEP(auth_password(authctxt, password)) == 1)
+ )
authenticated = 1;
memset(password, 0, len);
xfree(password);
diff --git a/configure.ac b/configure.ac
index 47fef0c..e5a8d6f 100644
--- a/configure.ac
+++ b/configure.ac
@@ -1,4 +1,4 @@
-# $Id: configure.ac,v 1.113 2003/03/21 01:18:09 mouring Exp $
+# $Id: configure.ac,v 1.113.2.1 2003/04/29 09:12:08 djm Exp $
AC_INIT
AC_CONFIG_SRCDIR([ssh.c])
@@ -57,20 +57,24 @@
AFS_LIBS="-lld"
CPPFLAGS="$CPPFLAGS -I/usr/local/include"
LDFLAGS="$LDFLAGS -L/usr/local/lib"
- if (test "$LD" != "gcc" && test -z "$blibpath"); then
- AC_MSG_CHECKING([if linkage editor ($LD) accepts -blibpath])
- saved_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -blibpath:/usr/lib:/lib:/usr/local/lib"
- AC_TRY_LINK([],
- [],
- [
- AC_MSG_RESULT(yes)
- blibpath="/usr/lib:/lib:/usr/local/lib"
- ],
- [ AC_MSG_RESULT(no) ]
- )
- LDFLAGS="$saved_LDFLAGS"
+ AC_MSG_CHECKING([how to specify blibpath for linker ($LD)])
+ if (test -z "$blibpath"); then
+ blibpath="/usr/lib:/lib:/usr/local/lib"
fi
+ saved_LDFLAGS="$LDFLAGS"
+ for tryflags in -blibpath: -Wl,-blibpath: -Wl,-rpath, ;do
+ if (test -z "$blibflags"); then
+ LDFLAGS="$saved_LDFLAGS $tryflags$blibpath"
+ AC_TRY_LINK([], [], [blibflags=$tryflags])
+ fi
+ done
+ if (test -z "$blibflags"); then
+ AC_MSG_RESULT(not found)
+ AC_MSG_ERROR([*** must be able to specify blibpath on AIX - check config.log])
+ else
+ AC_MSG_RESULT($blibflags)
+ fi
+ LDFLAGS="$saved_LDFLAGS"
AC_CHECK_FUNC(authenticate, [AC_DEFINE(WITH_AIXAUTHENTICATE)],
[AC_CHECK_LIB(s,authenticate,
[ AC_DEFINE(WITH_AIXAUTHENTICATE)
@@ -618,6 +622,7 @@
)
AC_SEARCH_LIBS(nanosleep, rt posix4, AC_DEFINE(HAVE_NANOSLEEP))
+AC_SEARCH_LIBS(basename, gen, AC_DEFINE(HAVE_BASENAME))
dnl Make sure strsep prototype is defined before defining HAVE_STRSEP
AC_CHECK_DECL(strsep, [AC_CHECK_FUNCS(strsep)])
@@ -2473,8 +2478,8 @@
if test ! -z "$blibpath" ; then
- LDFLAGS="$LDFLAGS -blibpath:$blibpath"
- AC_MSG_WARN([Please check and edit -blibpath in LDFLAGS in Makefile])
+ LDFLAGS="$LDFLAGS $blibflags$blibpath"
+ AC_MSG_WARN([Please check and edit blibpath in LDFLAGS in Makefile])
fi
dnl remove pam and dl because they are in $LIBPAM
diff --git a/contrib/caldera/openssh.spec b/contrib/caldera/openssh.spec
index 142d30d..f7fbe15 100644
--- a/contrib/caldera/openssh.spec
+++ b/contrib/caldera/openssh.spec
@@ -17,7 +17,7 @@
#old cvs stuff. please update before use. may be deprecated.
%define use_stable 1
%if %{use_stable}
- %define version 3.6.1p1
+ %define version 3.6.1p2
%define cvs %{nil}
%define release 2
%else
@@ -364,4 +364,4 @@
* Mon Jan 01 1998 ...
Template Version: 1.31
-$Id: openssh.spec,v 1.42 2003/04/01 11:46:53 djm Exp $
+$Id: openssh.spec,v 1.42.2.1 2003/04/29 09:12:08 djm Exp $
diff --git a/contrib/redhat/openssh.spec b/contrib/redhat/openssh.spec
index 11d86a8..e7c3bb1 100644
--- a/contrib/redhat/openssh.spec
+++ b/contrib/redhat/openssh.spec
@@ -1,5 +1,5 @@
-%define ver 3.6.1p1
-%define rel 2
+%define ver 3.6.1p2
+%define rel 1
# OpenSSH privilege separation requires a user & group ID
%define sshd_uid 74
@@ -87,7 +87,7 @@
%else
PreReq: initscripts >= 5.20
%endif
-BuildPreReq: perl, openssl-devel, tcp_wrappers
+BuildPreReq: perl, openssl-devel, sharutils, tcp_wrappers
BuildPreReq: /bin/login
%if ! %{build6x}
BuildPreReq: glibc-devel, pam
diff --git a/contrib/suse/openssh.spec b/contrib/suse/openssh.spec
index 194dbb7..707c3a2 100644
--- a/contrib/suse/openssh.spec
+++ b/contrib/suse/openssh.spec
@@ -1,6 +1,6 @@
Summary: OpenSSH, a free Secure Shell (SSH) protocol implementation
Name: openssh
-Version: 3.6.1p1
+Version: 3.6.1p2
URL: http://www.openssh.com/
Release: 1
Source0: openssh-%{version}.tar.gz
diff --git a/monitor.c b/monitor.c
index 46db0e9..bce9e68 100644
--- a/monitor.c
+++ b/monitor.c
@@ -25,7 +25,7 @@
*/
#include "includes.h"
-RCSID("$OpenBSD: monitor.c,v 1.37 2003/04/02 09:48:07 markus Exp $");
+RCSID("$OpenBSD: monitor.c,v 1.36 2003/04/01 10:22:21 markus Exp $");
#include <openssl/dh.h>
@@ -606,7 +606,7 @@
passwd = buffer_get_string(m, &plen);
/* Only authenticate if the context is valid */
authenticated = options.password_authentication &&
- authctxt->valid && auth_password(authctxt, passwd);
+ auth_password(authctxt, passwd) && authctxt->valid;
memset(passwd, 0, strlen(passwd));
xfree(passwd);
@@ -870,7 +870,7 @@
fail++;
p = buffer_get_string(&b, NULL);
if (strcmp(authctxt->user, p) != 0) {
- logit("wrong user name passed to monitor: expected %s != %.100s",
+ log("wrong user name passed to monitor: expected %s != %.100s",
authctxt->user, p);
fail++;
}
@@ -918,7 +918,7 @@
fail++;
p = buffer_get_string(&b, NULL);
if (strcmp(authctxt->user, p) != 0) {
- logit("wrong user name passed to monitor: expected %s != %.100s",
+ log("wrong user name passed to monitor: expected %s != %.100s",
authctxt->user, p);
fail++;
}
@@ -1497,8 +1497,6 @@
Buffer m;
u_char *blob, *p;
u_int bloblen, plen;
- u_int32_t seqnr, packets;
- u_int64_t blocks;
debug3("%s: Waiting for new keys", __func__);
@@ -1528,14 +1526,8 @@
xfree(blob);
/* Now get sequence numbers for the packets */
- seqnr = buffer_get_int(&m);
- blocks = buffer_get_int64(&m);
- packets = buffer_get_int(&m);
- packet_set_state(MODE_OUT, seqnr, blocks, packets);
- seqnr = buffer_get_int(&m);
- blocks = buffer_get_int64(&m);
- packets = buffer_get_int(&m);
- packet_set_state(MODE_IN, seqnr, blocks, packets);
+ packet_set_seqnr(MODE_OUT, buffer_get_int(&m));
+ packet_set_seqnr(MODE_IN, buffer_get_int(&m));
skip:
/* Get the key context */
diff --git a/version.h b/version.h
index 75a2b25..3b2a35d 100644
--- a/version.h
+++ b/version.h
@@ -1,3 +1,3 @@
/* $OpenBSD: version.h,v 1.37 2003/04/01 10:56:46 markus Exp $ */
-#define SSH_VERSION "OpenSSH_3.6.1p1"
+#define SSH_VERSION "OpenSSH_3.6.1p2"
