| ############### LAVA |
| # job prefixes: radeonsi (OpenGL), radv (Vulkan), amd (radeonsi+radv) |
| .stoney-test:x86_64: |
| variables: |
| BOOT_METHOD: depthcharge |
| DEQP_EXPECTED_RENDERER: STONEY |
| DTB: "" |
| FDO_CI_CONCURRENT: 3 |
| HWCI_FREQ_MAX: "true" |
| HWCI_KERNEL_MODULES: amdgpu |
| KERNEL_IMAGE_TYPE: "" |
| FLAKES_CHANNEL: "#amd-ci" |
| |
| .radeonsi-stoney-test:x86_64: |
| extends: |
| - .stoney-test:x86_64 |
| - .radeonsi-rules |
| variables: |
| GPU_VERSION: radeonsi-stoney |
| DRIVER_NAME: radeonsi |
| # 12 devices (2023-01-10) |
| RUNNER_TAG: mesa-ci-x86-64-lava-acer-R721T-grunt |
| DEVICE_TYPE: acer-R721T-grunt |
| PIGLIT_PLATFORM: mixed_glx_egl |
| |
| .radv-stoney-test:x86_64: |
| extends: |
| - .stoney-test:x86_64 |
| - .radv-collabora-rules |
| variables: |
| DEQP_VER: vk |
| DRIVER_NAME: radv |
| GPU_VERSION: radv-stoney-aco |
| VK_DRIVER: radeon |
| # 6 devices (2022-11-30) |
| DEVICE_TYPE: hp-14-db0003na-grunt |
| RUNNER_TAG: mesa-ci-x86-64-lava-hp-14-db0003na-grunt |
| |
| # Run five jobs in parallel each running 1/55th of the test suite |
| radv-stoney-vkcts:x86_64: |
| extends: |
| - .lava-test-deqp:x86_64 |
| - .radv-stoney-test:x86_64 |
| parallel: 5 |
| variables: |
| DEQP_FRACTION: 11 |
| |
| radv-stoney-angle: |
| extends: |
| - .lava-test-deqp:x86_64 |
| - .radv-stoney-test:x86_64 |
| - .radeonsi+radv-rules # Note: Xorg uses radeonsi, so depend on both gl and vulkan |
| variables: |
| DEQP_SUITE: radv-stoney-angle |
| USE_ANGLE: 1 |
| HWCI_START_XORG: 1 |
| GPU_VERSION: angle-radv-stoney-aco |
| |
| radv-stoney-angle-full: |
| extends: |
| - radv-stoney-angle |
| - .radv-valve-manual-rules |
| parallel: 2 |
| variables: |
| DEQP_SUITE: radv-stoney-angle-full |
| JOB_TIMEOUT: 60 |
| |
| radeonsi-stoney-gl:x86_64: |
| extends: |
| - .lava-test-deqp:x86_64 |
| - .radeonsi-stoney-test:x86_64 |
| parallel: 11 |
| variables: |
| DEQP_SUITE: radeonsi-stoney |
| HWCI_START_WESTON: 1 |
| |
| radeonsi-stoney-traces:x86_64: |
| extends: |
| - .lava-piglit-traces:x86_64 |
| - .radeonsi-stoney-test:x86_64 |
| variables: |
| EGL_PLATFORM: surfaceless |
| PIGLIT_REPLAY_DESCRIPTION_FILE: "/install/traces-amd.yml" |
| PIGLIT_REPLAY_EXTRA_ARGS: --keep-image |
| |
| # 10 devices (2023-01-17) |
| .lava-asus-CM1400CXA-dalboz:x86_64: |
| variables: |
| BOOT_METHOD: depthcharge |
| DEVICE_TYPE: asus-CM1400CXA-dalboz |
| DTB: "" |
| HWCI_FREQ_MAX: "true" |
| HWCI_KERNEL_MODULES: amdgpu |
| KERNEL_IMAGE_TYPE: "" |
| RUNNER_TAG: mesa-ci-x86-64-lava-asus-CM1400CXA-dalboz |
| |
| # 5 devices (2023-05-03) |
| .lava-lenovo-TPad-C13-Yoga-zork:x86_64: |
| variables: |
| BOOT_METHOD: depthcharge |
| DEVICE_TYPE: lenovo-TPad-C13-Yoga-zork |
| DTB: "" |
| HWCI_FREQ_MAX: "true" |
| HWCI_KERNEL_MODULES: amdgpu |
| KERNEL_IMAGE_TYPE: "" |
| RUNNER_TAG: mesa-ci-x86-64-lava-lenovo-TPad-C13-Yoga-zork |
| |
| .radeonsi-raven-test:x86_64: |
| extends: |
| - .radeonsi-rules |
| variables: |
| GPU_VERSION: radeonsi-raven |
| DRIVER_NAME: radeonsi |
| |
| .radv-raven-test:x86_64: |
| extends: |
| - .radv-collabora-rules |
| variables: |
| GPU_VERSION: radv-raven |
| VK_DRIVER: radeon |
| |
| .amd-raven-test:x86_64: |
| extends: |
| - .radeonsi+radv-rules |
| variables: |
| DRIVER_NAME: radeonsi |
| GPU_VERSION: amd-raven |
| VK_DRIVER: radeon |
| |
| radv-raven-vkcts:x86_64: |
| extends: |
| - .lava-test-deqp:x86_64 |
| - .radv-raven-test:x86_64 |
| - .lava-asus-CM1400CXA-dalboz:x86_64 |
| parallel: 9 |
| variables: |
| DEQP_VER: vk |
| DEQP_FRACTION: 6 |
| |
| amd-raven-skqp:x86_64: |
| extends: |
| - .lava-test-deqp:x86_64 |
| - .amd-raven-test:x86_64 |
| - .lava-lenovo-TPad-C13-Yoga-zork:x86_64 |
| variables: |
| HWCI_START_WESTON: 1 |
| DEQP_SUITE: amd-raven-skqp |
| |
| .radv-traces: |
| extends: |
| - .lava-piglit-traces:x86_64 |
| variables: |
| PIGLIT_PLATFORM: mixed_glx_egl # TODO, take wine/VK in account |
| PIGLIT_REPLAY_DESCRIPTION_FILE: "/install/traces-amd.yml" |
| PIGLIT_REPLAY_EXTRA_ARGS: --keep-image |
| |
| radv-raven-traces:x86_64: |
| extends: |
| - .radv-traces |
| - .radv-raven-test:x86_64 |
| - .lava-lenovo-TPad-C13-Yoga-zork:x86_64 |
| variables: |
| HWCI_START_XORG: 1 |
| PIGLIT_REPLAY_DEVICE_NAME: "vk-${GPU_VERSION}" |
| |
| radeonsi-raven-piglit-quick_gl:x86_64: |
| extends: |
| - .lava-piglit:x86_64 |
| - .radeonsi-raven-test:x86_64 |
| - .lava-lenovo-TPad-C13-Yoga-zork:x86_64 |
| variables: |
| PIGLIT_PLATFORM: mixed_glx_egl |
| PIGLIT_PROFILES: quick_gl |
| HWCI_START_WESTON: 1 |
| |
| radeonsi-raven-piglit-quick_shader:x86_64: |
| extends: |
| - radeonsi-raven-piglit-quick_gl:x86_64 |
| variables: |
| PIGLIT_PROFILES: quick_shader |
| PIGLIT_FRACTION: 2 |
| |
| radeonsi-raven-va:x86_64: |
| extends: |
| - .lava-test-deqp:x86_64 |
| - .radeonsi-raven-test:x86_64 |
| - .radeonsi-vaapi-rules |
| - .lava-asus-CM1400CXA-dalboz:x86_64 |
| variables: |
| HWCI_TEST_SCRIPT: "/install/gtest-runner.sh" |
| # While the tests don't need Xorg, it's an easy way to keep DRM open so we don't |
| # spend all our time in drm_lastclose()'s modesetting. |
| HWCI_START_WESTON: 1 |
| GTEST: test_va_api |
| # The big 10-surface 10k allocations oomkill us at around 2.5G of GPU memory |
| # allocated if we run at the normal 4 threads. |
| # https://github.com/intel/libva-utils/issues/248 |
| FDO_CI_CONCURRENT: 1 |
| # A whole run would be about 25 minutes currently. Fixing |
| # https://github.com/intel/libva-utils/issues/247 and |
| # https://github.com/google/googletest/issues/3614 would probably help. |
| GTEST_FRACTION: 2 |
| |
| radeonsi-raven-va-full:x86_64: |
| extends: |
| - radeonsi-raven-va:x86_64 |
| - .radeonsi-vaapi-manual-rules |
| variables: |
| JOB_TIMEOUT: 60 |
| GTEST_FRACTION: null |
| |
| ############### Valve Infra |
| .test-radv: |
| variables: |
| VK_DRIVER: radeon |
| DRIVER_NAME: radv |
| # The SPIRV -> NIR code generator generates so many harmless |
| # warnings on the shaders in VK-CTS that jobs fail due to the log |
| # size getting too big. Since it's not feasible right now |
| # to fix these shaders in the CTS, instead, ignore warnings from |
| # the code generator. |
| ACO_DEBUG: validateir,validatera |
| MESA_VK_IGNORE_CONFORMANCE_WARNING: 1 |
| B2C_JOB_VOLUME_EXCLUSIONS: "*.shader_cache,install/*,*/install/*,*/vkd3d-proton.cache*,vkd3d-proton.cache*,*.qpa" |
| # Enable ETC2 emulation on non-native platforms (RENOIR,RDNA+, GFX6-8 dGPUs) |
| radv_require_etc2: 'true' |
| |
| .b2c-test-radv-vk: |
| extends: |
| - .radv-valve-rules |
| - .test-radv |
| - .b2c-test-vk |
| |
| .deqp-test-valve: |
| variables: |
| B2C_JOB_SUCCESS_REGEX: '^\+ DEQP_EXITCODE=0\r$' |
| HWCI_TEST_SCRIPT: ./install/deqp-runner.sh |
| |
| .kabini-test-valve: |
| variables: |
| RUNNER_FARM_LOCATION: mupuf |
| B2C_KERNEL_CMDLINE_EXTRAS: 'b2c.swap=8g' |
| tags: |
| - amdgpu:codename:KABINI |
| |
| .polaris10-test-valve: |
| variables: |
| RUNNER_FARM_LOCATION: keywords |
| FDO_CI_CONCURRENT: 16 |
| B2C_TIMEOUT_BOOT_RETRIES: 4 |
| # (2022-01) tsc=unstable was added in response to this message in kmsg, |
| # TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'. |
| B2C_KERNEL_CMDLINE_EXTRAS: 'b2c.swap=16g tsc=unstable' |
| tags: |
| - amdgpu:codename:POLARIS10 |
| |
| .vega10-test-valve: |
| variables: |
| RUNNER_FARM_LOCATION: keywords |
| FDO_CI_CONCURRENT: 16 |
| B2C_KERNEL_CMDLINE_EXTRAS: 'b2c.swap=16g' |
| tags: |
| - amdgpu:codename:VEGA10 |
| |
| .renoir-test-valve: |
| variables: |
| RUNNER_FARM_LOCATION: mupuf |
| FDO_CI_CONCURRENT: 24 |
| B2C_KERNEL_CMDLINE_EXTRAS: 'b2c.swap=16g' |
| B2C_TIMEOUT_BOOT_MINUTES: 60 |
| B2C_TIMEOUT_OVERALL_MINUTES: 120 |
| tags: |
| - amdgpu:codename:RENOIR |
| |
| .navi10-test-valve: |
| variables: |
| RUNNER_FARM_LOCATION: mupuf |
| FDO_CI_CONCURRENT: 24 |
| # (2022-01) noapic is set because the serial adapter on this |
| # machine is using non-MSI IRQs and is generating a lot of |
| # IRQs. This tends to confuse the interrupt controller and breaks |
| # MSI IRQs leading to GPU hangs on amdgpu. |
| B2C_KERNEL_CMDLINE_EXTRAS: 'b2c.swap=16g noapic' |
| tags: |
| - amdgpu:codename:NAVI10 |
| |
| .navi21-test-valve: |
| variables: |
| RUNNER_FARM_LOCATION: keywords |
| FDO_CI_CONCURRENT: 32 |
| B2C_KERNEL_CMDLINE_EXTRAS: 'b2c.swap=16g' |
| tags: |
| - amdgpu:codename:NAVI21 |
| |
| .vangogh-test-valve: |
| variables: |
| RUNNER_FARM_LOCATION: mupuf |
| FDO_CI_CONCURRENT: 8 |
| B2C_TIMEOUT_BOOT_MINUTES: 85 |
| B2C_TIMEOUT_OVERALL_MINUTES: 120 |
| B2C_KERNEL_CMDLINE_EXTRAS: 'b2c.swap=16g' |
| tags: |
| - amdgpu:codename:VANGOGH |
| - $VALVE_INFRA_VANGOGH_JOB_PRIORITY |
| |
| ############### VKCTS tests ############### |
| |
| # A note on the variables to control fractional VKCTS runs |
| # parallel: N means to split the test list into chunks of 1/N lines, and |
| # DEQP_FRACTION: M means to run every Mth test from the resulting lines. |
| # So parallel: 2 and DEQP_FRACTION: 5 would imply running 1/10th of the suite. |
| .vkcts-test-valve: |
| extends: |
| - .b2c-test-radv-vk |
| - .deqp-test-valve |
| variables: |
| DEQP_VER: vk |
| |
| # VKCTS never finishes on gfx7 due to all the GPU resets and hangs. |
| # Hence, disable it for now. |
| .vkcts-kabini-valve: |
| extends: |
| - .vkcts-test-valve |
| - .kabini-test-valve |
| - .radv-valve-manual-rules # Make sure this job is *always* run manually |
| timeout: 12h |
| variables: |
| GPU_VERSION: radv-kabini-aco |
| B2C_TIMEOUT_BOOT_MINUTES: 710 |
| B2C_TIMEOUT_OVERALL_MINUTES: 710 |
| B2C_TIMEOUT_BOOT_RETRIES: 0 |
| |
| # Disabled for now due to Igalia farm issues. |
| .vkcts-stoney-valve: |
| extends: |
| - .vkcts-test-valve |
| - .radv-valve-manual-rules |
| parallel: 2 |
| # The thin clients can't manage a full run in less than an hour |
| # currently. Interpolation suggests four more thin clients (6 |
| # total) would get the runtime under 15 minutes. |
| timeout: 4h 10m |
| variables: |
| GPU_VERSION: radv-stoney-aco |
| # Note, it only has a wee 32g disk! |
| B2C_KERNEL_CMDLINE_EXTRAS: 'b2c.swap=8g' |
| B2C_TIMEOUT_BOOT_MINUTES: 240 |
| B2C_TIMEOUT_OVERALL_MINUTES: 240 |
| B2C_TIMEOUT_BOOT_RETRIES: 0 |
| tags: |
| - amdgpu:codename:STONEY |
| |
| .vkcts-polaris10-valve: |
| extends: |
| - .vkcts-test-valve |
| - .polaris10-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| GPU_VERSION: radv-polaris10-aco |
| |
| vkcts-vega10-valve: |
| extends: |
| - .vkcts-test-valve |
| - .vega10-test-valve |
| - .radv-valve-manual-rules |
| timeout: 1h 15m |
| variables: |
| GPU_VERSION: radv-vega10-aco |
| B2C_TIMEOUT_BOOT_MINUTES: 70 |
| B2C_TIMEOUT_OVERALL_MINUTES: 70 |
| |
| vkcts-renoir-valve: |
| extends: |
| - .vkcts-test-valve |
| - .renoir-test-valve |
| - .radv-valve-manual-rules |
| timeout: 2h 15m |
| variables: |
| GPU_VERSION: radv-renoir-aco |
| B2C_TIMEOUT_BOOT_MINUTES: 130 |
| B2C_TIMEOUT_OVERALL_MINUTES: 130 |
| |
| vkcts-navi10-valve: |
| extends: |
| - .vkcts-test-valve |
| - .navi10-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| GPU_VERSION: radv-navi10-aco |
| # Use Linux 5.17 to work around hitting __vm_enough_memory then hanging on Linux 6.1 |
| # See https://gitlab.freedesktop.org/mesa/mesa/-/issues/7888 for details |
| B2C_KERNEL_URL: 'https://gitlab.freedesktop.org/mupuf/valve-infra/-/package_files/144/download' # 5.17.1 |
| # NAVI10 hangs quite often while running vkcts. This is being investigated, |
| # but in the mean time, retry up to 2 times. |
| B2C_SESSION_REBOOT_REGEX: '(GPU hang detected!|\*ERROR\* ring [^\s]+ timeout(?!, but soft recovered)|The CS has been cancelled because the context is lost)' |
| B2C_TIMEOUT_BOOT_RETRIES: 2 |
| |
| vkcts-navi21-valve: |
| parallel: 3 |
| extends: |
| - .vkcts-test-valve |
| - .navi21-test-valve |
| variables: |
| GPU_VERSION: radv-navi21-aco |
| |
| # Disabled due to its extremelly-broken nature |
| .vkcts-navi21-llvm-valve: |
| extends: |
| - .vkcts-test-valve |
| - .navi21-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| GPU_VERSION: radv-navi21-llvm |
| RADV_DEBUG: llvm,checkir |
| |
| vkcts-vangogh-valve: |
| parallel: 2 |
| extends: |
| - .vkcts-test-valve |
| - .vangogh-test-valve |
| - .radv-valve-manual-rules |
| timeout: 2h 10m |
| variables: |
| GPU_VERSION: radv-vangogh-aco |
| |
| glcts-vangogh-valve: |
| extends: |
| - .b2c-test-gl |
| - .deqp-test-valve |
| - .vangogh-test-valve |
| - .radeonsi-valve-manual-rules |
| timeout: 40m |
| variables: |
| GPU_VERSION: radeonsi-vangogh |
| DEQP_SUITE: radeonsi-vangogh |
| |
| ############### Fossilize |
| radv-fossils: |
| extends: |
| - .radv-valve-rules |
| - .test-vk |
| - .test-radv |
| - .fossilize-test |
| script: |
| - export LD_PRELOAD=$PWD/install/lib/libamdgpu_noop_drm_shim.so |
| # Pitcairn (GFX6) |
| - AMDGPU_GPU_ID="PITCAIRN" |
| ./install/fossilize-runner.sh |
| # Bonaire (GFX7) |
| - AMDGPU_GPU_ID="BONAIRE" |
| ./install/fossilize-runner.sh |
| # Polaris10 (GFX8) |
| - AMDGPU_GPU_ID="POLARIS10" |
| ./install/fossilize-runner.sh |
| # Vega10 (GFX9) |
| - AMDGPU_GPU_ID="VEGA10" |
| ./install/fossilize-runner.sh |
| # Navi10 (GFX10) |
| - AMDGPU_GPU_ID="NAVI10" |
| ./install/fossilize-runner.sh |
| # Navi21 (GFX10_3) |
| - AMDGPU_GPU_ID="NAVI21" |
| ./install/fossilize-runner.sh |
| # RDNA3 (GFX11) |
| - AMDGPU_GPU_ID="GFX1100" |
| ./install/fossilize-runner.sh |
| |
| ############### vkd3d-proton |
| .vkd3d-test-valve: |
| extends: |
| - .b2c-test-radv-vk |
| variables: |
| B2C_JOB_SUCCESS_REGEX: 'vkd3d-proton execution: SUCCESS\r$' |
| HWCI_TEST_SCRIPT: ./install/vkd3d-proton/run.sh |
| |
| .vkd3d-kabini-valve: |
| extends: |
| - .vkd3d-test-valve |
| - .kabini-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| VKD3D_PROTON_RESULTS: radv-kabini-vkd3d |
| |
| .vkd3d-polaris10-valve: |
| extends: |
| - .vkd3d-test-valve |
| - .polaris10-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| VKD3D_PROTON_RESULTS: radv-polaris10-vkd3d |
| |
| vkd3d-vega10-valve: |
| extends: |
| - .vkd3d-test-valve |
| - .vega10-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| VKD3D_PROTON_RESULTS: radv-vega10-vkd3d |
| |
| vkd3d-renoir-valve: |
| extends: |
| - .vkd3d-test-valve |
| - .renoir-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| VKD3D_PROTON_RESULTS: radv-renoir-vkd3d |
| |
| vkd3d-navi10-valve: |
| extends: |
| - .vkd3d-test-valve |
| - .navi10-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| VKD3D_PROTON_RESULTS: radv-navi10-vkd3d |
| |
| vkd3d-navi21-valve: |
| extends: |
| - .vkd3d-test-valve |
| - .navi21-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| VKD3D_PROTON_RESULTS: radv-navi21-vkd3d |
| VKD3D_CONFIG: dxr11 |
| |
| vkd3d-vangogh-valve: |
| extends: |
| - .vkd3d-test-valve |
| - .vangogh-test-valve |
| - .radv-valve-manual-rules |
| variables: |
| VKD3D_PROTON_RESULTS: radv-vangogh-vkd3d |
