| /* |
| * Copyright © 2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| |
| #include <assert.h> |
| #include <stdbool.h> |
| |
| #include "anv_private.h" |
| #include "vk_format_info.h" |
| #include "vk_util.h" |
| #include "util/fast_idiv_by_const.h" |
| |
| #include "common/gen_l3_config.h" |
| #include "genxml/gen_macros.h" |
| #include "genxml/genX_pack.h" |
| |
| /* We reserve GPR 14 and 15 for conditional rendering */ |
| #define GEN_MI_BUILDER_NUM_ALLOC_GPRS 14 |
| #define __gen_get_batch_dwords anv_batch_emit_dwords |
| #define __gen_address_offset anv_address_add |
| #include "common/gen_mi_builder.h" |
| |
| static void |
| emit_lri(struct anv_batch *batch, uint32_t reg, uint32_t imm) |
| { |
| anv_batch_emit(batch, GENX(MI_LOAD_REGISTER_IMM), lri) { |
| lri.RegisterOffset = reg; |
| lri.DataDWord = imm; |
| } |
| } |
| |
| void |
| genX(cmd_buffer_emit_state_base_address)(struct anv_cmd_buffer *cmd_buffer) |
| { |
| struct anv_device *device = cmd_buffer->device; |
| |
| /* If we are emitting a new state base address we probably need to re-emit |
| * binding tables. |
| */ |
| cmd_buffer->state.descriptors_dirty |= ~0; |
| |
| /* Emit a render target cache flush. |
| * |
| * This isn't documented anywhere in the PRM. However, it seems to be |
| * necessary prior to changing the surface state base adress. Without |
| * this, we get GPU hangs when using multi-level command buffers which |
| * clear depth, reset state base address, and then go render stuff. |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.DCFlushEnable = true; |
| pc.RenderTargetCacheFlushEnable = true; |
| pc.CommandStreamerStallEnable = true; |
| } |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(STATE_BASE_ADDRESS), sba) { |
| sba.GeneralStateBaseAddress = (struct anv_address) { NULL, 0 }; |
| sba.GeneralStateMOCS = GENX(MOCS); |
| sba.GeneralStateBaseAddressModifyEnable = true; |
| |
| sba.StatelessDataPortAccessMOCS = GENX(MOCS); |
| |
| sba.SurfaceStateBaseAddress = |
| anv_cmd_buffer_surface_base_address(cmd_buffer); |
| sba.SurfaceStateMOCS = GENX(MOCS); |
| sba.SurfaceStateBaseAddressModifyEnable = true; |
| |
| sba.DynamicStateBaseAddress = |
| (struct anv_address) { device->dynamic_state_pool.block_pool.bo, 0 }; |
| sba.DynamicStateMOCS = GENX(MOCS); |
| sba.DynamicStateBaseAddressModifyEnable = true; |
| |
| sba.IndirectObjectBaseAddress = (struct anv_address) { NULL, 0 }; |
| sba.IndirectObjectMOCS = GENX(MOCS); |
| sba.IndirectObjectBaseAddressModifyEnable = true; |
| |
| sba.InstructionBaseAddress = |
| (struct anv_address) { device->instruction_state_pool.block_pool.bo, 0 }; |
| sba.InstructionMOCS = GENX(MOCS); |
| sba.InstructionBaseAddressModifyEnable = true; |
| |
| # if (GEN_GEN >= 8) |
| /* Broadwell requires that we specify a buffer size for a bunch of |
| * these fields. However, since we will be growing the BO's live, we |
| * just set them all to the maximum. |
| */ |
| sba.GeneralStateBufferSize = 0xfffff; |
| sba.GeneralStateBufferSizeModifyEnable = true; |
| sba.DynamicStateBufferSize = 0xfffff; |
| sba.DynamicStateBufferSizeModifyEnable = true; |
| sba.IndirectObjectBufferSize = 0xfffff; |
| sba.IndirectObjectBufferSizeModifyEnable = true; |
| sba.InstructionBufferSize = 0xfffff; |
| sba.InstructionBuffersizeModifyEnable = true; |
| # else |
| /* On gen7, we have upper bounds instead. According to the docs, |
| * setting an upper bound of zero means that no bounds checking is |
| * performed so, in theory, we should be able to leave them zero. |
| * However, border color is broken and the GPU bounds-checks anyway. |
| * To avoid this and other potential problems, we may as well set it |
| * for everything. |
| */ |
| sba.GeneralStateAccessUpperBound = |
| (struct anv_address) { .bo = NULL, .offset = 0xfffff000 }; |
| sba.GeneralStateAccessUpperBoundModifyEnable = true; |
| sba.DynamicStateAccessUpperBound = |
| (struct anv_address) { .bo = NULL, .offset = 0xfffff000 }; |
| sba.DynamicStateAccessUpperBoundModifyEnable = true; |
| sba.InstructionAccessUpperBound = |
| (struct anv_address) { .bo = NULL, .offset = 0xfffff000 }; |
| sba.InstructionAccessUpperBoundModifyEnable = true; |
| # endif |
| # if (GEN_GEN >= 9) |
| if (cmd_buffer->device->instance->physicalDevice.use_softpin) { |
| sba.BindlessSurfaceStateBaseAddress = (struct anv_address) { |
| .bo = device->surface_state_pool.block_pool.bo, |
| .offset = 0, |
| }; |
| sba.BindlessSurfaceStateSize = (1 << 20) - 1; |
| } else { |
| sba.BindlessSurfaceStateBaseAddress = ANV_NULL_ADDRESS; |
| sba.BindlessSurfaceStateSize = 0; |
| } |
| sba.BindlessSurfaceStateMOCS = GENX(MOCS); |
| sba.BindlessSurfaceStateBaseAddressModifyEnable = true; |
| # endif |
| # if (GEN_GEN >= 10) |
| sba.BindlessSamplerStateBaseAddress = (struct anv_address) { NULL, 0 }; |
| sba.BindlessSamplerStateMOCS = GENX(MOCS); |
| sba.BindlessSamplerStateBaseAddressModifyEnable = true; |
| sba.BindlessSamplerStateBufferSize = 0; |
| # endif |
| } |
| |
| /* After re-setting the surface state base address, we have to do some |
| * cache flusing so that the sampler engine will pick up the new |
| * SURFACE_STATE objects and binding tables. From the Broadwell PRM, |
| * Shared Function > 3D Sampler > State > State Caching (page 96): |
| * |
| * Coherency with system memory in the state cache, like the texture |
| * cache is handled partially by software. It is expected that the |
| * command stream or shader will issue Cache Flush operation or |
| * Cache_Flush sampler message to ensure that the L1 cache remains |
| * coherent with system memory. |
| * |
| * [...] |
| * |
| * Whenever the value of the Dynamic_State_Base_Addr, |
| * Surface_State_Base_Addr are altered, the L1 state cache must be |
| * invalidated to ensure the new surface or sampler state is fetched |
| * from system memory. |
| * |
| * The PIPE_CONTROL command has a "State Cache Invalidation Enable" bit |
| * which, according the PIPE_CONTROL instruction documentation in the |
| * Broadwell PRM: |
| * |
| * Setting this bit is independent of any other bit in this packet. |
| * This bit controls the invalidation of the L1 and L2 state caches |
| * at the top of the pipe i.e. at the parsing time. |
| * |
| * Unfortunately, experimentation seems to indicate that state cache |
| * invalidation through a PIPE_CONTROL does nothing whatsoever in |
| * regards to surface state and binding tables. In stead, it seems that |
| * invalidating the texture cache is what is actually needed. |
| * |
| * XXX: As far as we have been able to determine through |
| * experimentation, shows that flush the texture cache appears to be |
| * sufficient. The theory here is that all of the sampling/rendering |
| * units cache the binding table in the texture cache. However, we have |
| * yet to be able to actually confirm this. |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.TextureCacheInvalidationEnable = true; |
| pc.ConstantCacheInvalidationEnable = true; |
| pc.StateCacheInvalidationEnable = true; |
| } |
| } |
| |
| static void |
| add_surface_reloc(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_state state, struct anv_address addr) |
| { |
| const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev; |
| |
| VkResult result = |
| anv_reloc_list_add(&cmd_buffer->surface_relocs, &cmd_buffer->pool->alloc, |
| state.offset + isl_dev->ss.addr_offset, |
| addr.bo, addr.offset); |
| if (result != VK_SUCCESS) |
| anv_batch_set_error(&cmd_buffer->batch, result); |
| } |
| |
| static void |
| add_surface_state_relocs(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_surface_state state) |
| { |
| const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev; |
| |
| assert(!anv_address_is_null(state.address)); |
| add_surface_reloc(cmd_buffer, state.state, state.address); |
| |
| if (!anv_address_is_null(state.aux_address)) { |
| VkResult result = |
| anv_reloc_list_add(&cmd_buffer->surface_relocs, |
| &cmd_buffer->pool->alloc, |
| state.state.offset + isl_dev->ss.aux_addr_offset, |
| state.aux_address.bo, state.aux_address.offset); |
| if (result != VK_SUCCESS) |
| anv_batch_set_error(&cmd_buffer->batch, result); |
| } |
| |
| if (!anv_address_is_null(state.clear_address)) { |
| VkResult result = |
| anv_reloc_list_add(&cmd_buffer->surface_relocs, |
| &cmd_buffer->pool->alloc, |
| state.state.offset + |
| isl_dev->ss.clear_color_state_offset, |
| state.clear_address.bo, state.clear_address.offset); |
| if (result != VK_SUCCESS) |
| anv_batch_set_error(&cmd_buffer->batch, result); |
| } |
| } |
| |
| static void |
| color_attachment_compute_aux_usage(struct anv_device * device, |
| struct anv_cmd_state * cmd_state, |
| uint32_t att, VkRect2D render_area, |
| union isl_color_value *fast_clear_color) |
| { |
| struct anv_attachment_state *att_state = &cmd_state->attachments[att]; |
| struct anv_image_view *iview = cmd_state->attachments[att].image_view; |
| |
| assert(iview->n_planes == 1); |
| |
| if (iview->planes[0].isl.base_array_layer >= |
| anv_image_aux_layers(iview->image, VK_IMAGE_ASPECT_COLOR_BIT, |
| iview->planes[0].isl.base_level)) { |
| /* There is no aux buffer which corresponds to the level and layer(s) |
| * being accessed. |
| */ |
| att_state->aux_usage = ISL_AUX_USAGE_NONE; |
| att_state->input_aux_usage = ISL_AUX_USAGE_NONE; |
| att_state->fast_clear = false; |
| return; |
| } |
| |
| att_state->aux_usage = |
| anv_layout_to_aux_usage(&device->info, iview->image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL); |
| |
| /* If we don't have aux, then we should have returned early in the layer |
| * check above. If we got here, we must have something. |
| */ |
| assert(att_state->aux_usage != ISL_AUX_USAGE_NONE); |
| |
| if (att_state->aux_usage == ISL_AUX_USAGE_CCS_E || |
| att_state->aux_usage == ISL_AUX_USAGE_MCS) { |
| att_state->input_aux_usage = att_state->aux_usage; |
| } else { |
| /* From the Sky Lake PRM, RENDER_SURFACE_STATE::AuxiliarySurfaceMode: |
| * |
| * "If Number of Multisamples is MULTISAMPLECOUNT_1, AUX_CCS_D |
| * setting is only allowed if Surface Format supported for Fast |
| * Clear. In addition, if the surface is bound to the sampling |
| * engine, Surface Format must be supported for Render Target |
| * Compression for surfaces bound to the sampling engine." |
| * |
| * In other words, we can only sample from a fast-cleared image if it |
| * also supports color compression. |
| */ |
| if (isl_format_supports_ccs_e(&device->info, iview->planes[0].isl.format)) { |
| att_state->input_aux_usage = ISL_AUX_USAGE_CCS_D; |
| |
| /* While fast-clear resolves and partial resolves are fairly cheap in the |
| * case where you render to most of the pixels, full resolves are not |
| * because they potentially involve reading and writing the entire |
| * framebuffer. If we can't texture with CCS_E, we should leave it off and |
| * limit ourselves to fast clears. |
| */ |
| if (cmd_state->pass->attachments[att].first_subpass_layout == |
| VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL) { |
| anv_perf_warn(device->instance, iview->image, |
| "Not temporarily enabling CCS_E."); |
| } |
| } else { |
| att_state->input_aux_usage = ISL_AUX_USAGE_NONE; |
| } |
| } |
| |
| assert(iview->image->planes[0].aux_surface.isl.usage & |
| (ISL_SURF_USAGE_CCS_BIT | ISL_SURF_USAGE_MCS_BIT)); |
| |
| union isl_color_value clear_color = {}; |
| anv_clear_color_from_att_state(&clear_color, att_state, iview); |
| |
| att_state->clear_color_is_zero_one = |
| isl_color_value_is_zero_one(clear_color, iview->planes[0].isl.format); |
| att_state->clear_color_is_zero = |
| isl_color_value_is_zero(clear_color, iview->planes[0].isl.format); |
| |
| if (att_state->pending_clear_aspects == VK_IMAGE_ASPECT_COLOR_BIT) { |
| /* Start by getting the fast clear type. We use the first subpass |
| * layout here because we don't want to fast-clear if the first subpass |
| * to use the attachment can't handle fast-clears. |
| */ |
| enum anv_fast_clear_type fast_clear_type = |
| anv_layout_to_fast_clear_type(&device->info, iview->image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| cmd_state->pass->attachments[att].first_subpass_layout); |
| switch (fast_clear_type) { |
| case ANV_FAST_CLEAR_NONE: |
| att_state->fast_clear = false; |
| break; |
| case ANV_FAST_CLEAR_DEFAULT_VALUE: |
| att_state->fast_clear = att_state->clear_color_is_zero; |
| break; |
| case ANV_FAST_CLEAR_ANY: |
| att_state->fast_clear = true; |
| break; |
| } |
| |
| /* Potentially, we could do partial fast-clears but doing so has crazy |
| * alignment restrictions. It's easier to just restrict to full size |
| * fast clears for now. |
| */ |
| if (render_area.offset.x != 0 || |
| render_area.offset.y != 0 || |
| render_area.extent.width != iview->extent.width || |
| render_area.extent.height != iview->extent.height) |
| att_state->fast_clear = false; |
| |
| /* On Broadwell and earlier, we can only handle 0/1 clear colors */ |
| if (GEN_GEN <= 8 && !att_state->clear_color_is_zero_one) |
| att_state->fast_clear = false; |
| |
| /* We only allow fast clears to the first slice of an image (level 0, |
| * layer 0) and only for the entire slice. This guarantees us that, at |
| * any given time, there is only one clear color on any given image at |
| * any given time. At the time of our testing (Jan 17, 2018), there |
| * were no known applications which would benefit from fast-clearing |
| * more than just the first slice. |
| */ |
| if (att_state->fast_clear && |
| (iview->planes[0].isl.base_level > 0 || |
| iview->planes[0].isl.base_array_layer > 0)) { |
| anv_perf_warn(device->instance, iview->image, |
| "Rendering with multi-lod or multi-layer framebuffer " |
| "with LOAD_OP_LOAD and baseMipLevel > 0 or " |
| "baseArrayLayer > 0. Not fast clearing."); |
| att_state->fast_clear = false; |
| } else if (att_state->fast_clear && cmd_state->framebuffer->layers > 1) { |
| anv_perf_warn(device->instance, iview->image, |
| "Rendering to a multi-layer framebuffer with " |
| "LOAD_OP_CLEAR. Only fast-clearing the first slice"); |
| } |
| |
| if (att_state->fast_clear) |
| *fast_clear_color = clear_color; |
| } else { |
| att_state->fast_clear = false; |
| } |
| } |
| |
| static void |
| depth_stencil_attachment_compute_aux_usage(struct anv_device *device, |
| struct anv_cmd_state *cmd_state, |
| uint32_t att, VkRect2D render_area) |
| { |
| struct anv_render_pass_attachment *pass_att = |
| &cmd_state->pass->attachments[att]; |
| struct anv_attachment_state *att_state = &cmd_state->attachments[att]; |
| struct anv_image_view *iview = cmd_state->attachments[att].image_view; |
| |
| /* These will be initialized after the first subpass transition. */ |
| att_state->aux_usage = ISL_AUX_USAGE_NONE; |
| att_state->input_aux_usage = ISL_AUX_USAGE_NONE; |
| |
| if (GEN_GEN == 7) { |
| /* We don't do any HiZ or depth fast-clears on gen7 yet */ |
| att_state->fast_clear = false; |
| return; |
| } |
| |
| if (!(att_state->pending_clear_aspects & VK_IMAGE_ASPECT_DEPTH_BIT)) { |
| /* If we're just clearing stencil, we can always HiZ clear */ |
| att_state->fast_clear = true; |
| return; |
| } |
| |
| /* Default to false for now */ |
| att_state->fast_clear = false; |
| |
| /* We must have depth in order to have HiZ */ |
| if (!(iview->image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT)) |
| return; |
| |
| const enum isl_aux_usage first_subpass_aux_usage = |
| anv_layout_to_aux_usage(&device->info, iview->image, |
| VK_IMAGE_ASPECT_DEPTH_BIT, |
| pass_att->first_subpass_layout); |
| if (first_subpass_aux_usage != ISL_AUX_USAGE_HIZ) |
| return; |
| |
| if (!blorp_can_hiz_clear_depth(GEN_GEN, |
| iview->planes[0].isl.format, |
| iview->image->samples, |
| render_area.offset.x, |
| render_area.offset.y, |
| render_area.offset.x + |
| render_area.extent.width, |
| render_area.offset.y + |
| render_area.extent.height)) |
| return; |
| |
| if (att_state->clear_value.depthStencil.depth != ANV_HZ_FC_VAL) |
| return; |
| |
| if (GEN_GEN == 8 && anv_can_sample_with_hiz(&device->info, iview->image)) { |
| /* Only gen9+ supports returning ANV_HZ_FC_VAL when sampling a |
| * fast-cleared portion of a HiZ buffer. Testing has revealed that Gen8 |
| * only supports returning 0.0f. Gens prior to gen8 do not support this |
| * feature at all. |
| */ |
| return; |
| } |
| |
| /* If we got here, then we can fast clear */ |
| att_state->fast_clear = true; |
| } |
| |
| static bool |
| need_input_attachment_state(const struct anv_render_pass_attachment *att) |
| { |
| if (!(att->usage & VK_IMAGE_USAGE_INPUT_ATTACHMENT_BIT)) |
| return false; |
| |
| /* We only allocate input attachment states for color surfaces. Compression |
| * is not yet enabled for depth textures and stencil doesn't allow |
| * compression so we can just use the texture surface state from the view. |
| */ |
| return vk_format_is_color(att->format); |
| } |
| |
| /* Transitions a HiZ-enabled depth buffer from one layout to another. Unless |
| * the initial layout is undefined, the HiZ buffer and depth buffer will |
| * represent the same data at the end of this operation. |
| */ |
| static void |
| transition_depth_buffer(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| VkImageLayout initial_layout, |
| VkImageLayout final_layout) |
| { |
| const bool hiz_enabled = ISL_AUX_USAGE_HIZ == |
| anv_layout_to_aux_usage(&cmd_buffer->device->info, image, |
| VK_IMAGE_ASPECT_DEPTH_BIT, initial_layout); |
| const bool enable_hiz = ISL_AUX_USAGE_HIZ == |
| anv_layout_to_aux_usage(&cmd_buffer->device->info, image, |
| VK_IMAGE_ASPECT_DEPTH_BIT, final_layout); |
| |
| enum isl_aux_op hiz_op; |
| if (hiz_enabled && !enable_hiz) { |
| hiz_op = ISL_AUX_OP_FULL_RESOLVE; |
| } else if (!hiz_enabled && enable_hiz) { |
| hiz_op = ISL_AUX_OP_AMBIGUATE; |
| } else { |
| assert(hiz_enabled == enable_hiz); |
| /* If the same buffer will be used, no resolves are necessary. */ |
| hiz_op = ISL_AUX_OP_NONE; |
| } |
| |
| if (hiz_op != ISL_AUX_OP_NONE) |
| anv_image_hiz_op(cmd_buffer, image, VK_IMAGE_ASPECT_DEPTH_BIT, |
| 0, 0, 1, hiz_op); |
| } |
| |
| static inline bool |
| vk_image_layout_stencil_write_optimal(VkImageLayout layout) |
| { |
| return layout == VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL || |
| layout == VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL; |
| } |
| |
| /* Transitions a HiZ-enabled depth buffer from one layout to another. Unless |
| * the initial layout is undefined, the HiZ buffer and depth buffer will |
| * represent the same data at the end of this operation. |
| */ |
| static void |
| transition_stencil_buffer(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| uint32_t base_level, uint32_t level_count, |
| uint32_t base_layer, uint32_t layer_count, |
| VkImageLayout initial_layout, |
| VkImageLayout final_layout) |
| { |
| #if GEN_GEN == 7 |
| uint32_t plane = anv_image_aspect_to_plane(image->aspects, |
| VK_IMAGE_ASPECT_STENCIL_BIT); |
| |
| /* On gen7, we have to store a texturable version of the stencil buffer in |
| * a shadow whenever VK_IMAGE_USAGE_SAMPLED_BIT is set and copy back and |
| * forth at strategic points. Stencil writes are only allowed in three |
| * layouts: |
| * |
| * - VK_IMAGE_LAYOUT_GENERAL |
| * - VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL |
| * - VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL |
| * - VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL |
| * |
| * For general, we have no nice opportunity to transition so we do the copy |
| * to the shadow unconditionally at the end of the subpass. For transfer |
| * destinations, we can update it as part of the transfer op. For the |
| * other two, we delay the copy until a transition into some other layout. |
| */ |
| if (image->planes[plane].shadow_surface.isl.size_B > 0 && |
| vk_image_layout_stencil_write_optimal(initial_layout) && |
| !vk_image_layout_stencil_write_optimal(final_layout)) { |
| anv_image_copy_to_shadow(cmd_buffer, image, |
| VK_IMAGE_ASPECT_STENCIL_BIT, |
| base_level, level_count, |
| base_layer, layer_count); |
| } |
| #endif /* GEN_GEN == 7 */ |
| } |
| |
| #define MI_PREDICATE_SRC0 0x2400 |
| #define MI_PREDICATE_SRC1 0x2408 |
| #define MI_PREDICATE_RESULT 0x2418 |
| |
| static void |
| set_image_compressed_bit(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| VkImageAspectFlagBits aspect, |
| uint32_t level, |
| uint32_t base_layer, uint32_t layer_count, |
| bool compressed) |
| { |
| uint32_t plane = anv_image_aspect_to_plane(image->aspects, aspect); |
| |
| /* We only have compression tracking for CCS_E */ |
| if (image->planes[plane].aux_usage != ISL_AUX_USAGE_CCS_E) |
| return; |
| |
| for (uint32_t a = 0; a < layer_count; a++) { |
| uint32_t layer = base_layer + a; |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_DATA_IMM), sdi) { |
| sdi.Address = anv_image_get_compression_state_addr(cmd_buffer->device, |
| image, aspect, |
| level, layer); |
| sdi.ImmediateData = compressed ? UINT32_MAX : 0; |
| } |
| } |
| } |
| |
| static void |
| set_image_fast_clear_state(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| VkImageAspectFlagBits aspect, |
| enum anv_fast_clear_type fast_clear) |
| { |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_DATA_IMM), sdi) { |
| sdi.Address = anv_image_get_fast_clear_type_addr(cmd_buffer->device, |
| image, aspect); |
| sdi.ImmediateData = fast_clear; |
| } |
| |
| /* Whenever we have fast-clear, we consider that slice to be compressed. |
| * This makes building predicates much easier. |
| */ |
| if (fast_clear != ANV_FAST_CLEAR_NONE) |
| set_image_compressed_bit(cmd_buffer, image, aspect, 0, 0, 1, true); |
| } |
| |
| /* This is only really practical on haswell and above because it requires |
| * MI math in order to get it correct. |
| */ |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| static void |
| anv_cmd_compute_resolve_predicate(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| VkImageAspectFlagBits aspect, |
| uint32_t level, uint32_t array_layer, |
| enum isl_aux_op resolve_op, |
| enum anv_fast_clear_type fast_clear_supported) |
| { |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| const struct gen_mi_value fast_clear_type = |
| gen_mi_mem32(anv_image_get_fast_clear_type_addr(cmd_buffer->device, |
| image, aspect)); |
| |
| if (resolve_op == ISL_AUX_OP_FULL_RESOLVE) { |
| /* In this case, we're doing a full resolve which means we want the |
| * resolve to happen if any compression (including fast-clears) is |
| * present. |
| * |
| * In order to simplify the logic a bit, we make the assumption that, |
| * if the first slice has been fast-cleared, it is also marked as |
| * compressed. See also set_image_fast_clear_state. |
| */ |
| const struct gen_mi_value compression_state = |
| gen_mi_mem32(anv_image_get_compression_state_addr(cmd_buffer->device, |
| image, aspect, |
| level, array_layer)); |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC0), |
| compression_state); |
| gen_mi_store(&b, compression_state, gen_mi_imm(0)); |
| |
| if (level == 0 && array_layer == 0) { |
| /* If the predicate is true, we want to write 0 to the fast clear type |
| * and, if it's false, leave it alone. We can do this by writing |
| * |
| * clear_type = clear_type & ~predicate; |
| */ |
| struct gen_mi_value new_fast_clear_type = |
| gen_mi_iand(&b, fast_clear_type, |
| gen_mi_inot(&b, gen_mi_reg64(MI_PREDICATE_SRC0))); |
| gen_mi_store(&b, fast_clear_type, new_fast_clear_type); |
| } |
| } else if (level == 0 && array_layer == 0) { |
| /* In this case, we are doing a partial resolve to get rid of fast-clear |
| * colors. We don't care about the compression state but we do care |
| * about how much fast clear is allowed by the final layout. |
| */ |
| assert(resolve_op == ISL_AUX_OP_PARTIAL_RESOLVE); |
| assert(fast_clear_supported < ANV_FAST_CLEAR_ANY); |
| |
| /* We need to compute (fast_clear_supported < image->fast_clear) */ |
| struct gen_mi_value pred = |
| gen_mi_ult(&b, gen_mi_imm(fast_clear_supported), fast_clear_type); |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC0), |
| gen_mi_value_ref(&b, pred)); |
| |
| /* If the predicate is true, we want to write 0 to the fast clear type |
| * and, if it's false, leave it alone. We can do this by writing |
| * |
| * clear_type = clear_type & ~predicate; |
| */ |
| struct gen_mi_value new_fast_clear_type = |
| gen_mi_iand(&b, fast_clear_type, gen_mi_inot(&b, pred)); |
| gen_mi_store(&b, fast_clear_type, new_fast_clear_type); |
| } else { |
| /* In this case, we're trying to do a partial resolve on a slice that |
| * doesn't have clear color. There's nothing to do. |
| */ |
| assert(resolve_op == ISL_AUX_OP_PARTIAL_RESOLVE); |
| return; |
| } |
| |
| /* Set src1 to 0 and use a != condition */ |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC1), gen_mi_imm(0)); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOADINV; |
| mip.CombineOperation = COMBINE_SET; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| } |
| #endif /* GEN_GEN >= 8 || GEN_IS_HASWELL */ |
| |
| #if GEN_GEN <= 8 |
| static void |
| anv_cmd_simple_resolve_predicate(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| VkImageAspectFlagBits aspect, |
| uint32_t level, uint32_t array_layer, |
| enum isl_aux_op resolve_op, |
| enum anv_fast_clear_type fast_clear_supported) |
| { |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| struct gen_mi_value fast_clear_type_mem = |
| gen_mi_mem32(anv_image_get_fast_clear_type_addr(cmd_buffer->device, |
| image, aspect)); |
| |
| /* This only works for partial resolves and only when the clear color is |
| * all or nothing. On the upside, this emits less command streamer code |
| * and works on Ivybridge and Bay Trail. |
| */ |
| assert(resolve_op == ISL_AUX_OP_PARTIAL_RESOLVE); |
| assert(fast_clear_supported != ANV_FAST_CLEAR_ANY); |
| |
| /* We don't support fast clears on anything other than the first slice. */ |
| if (level > 0 || array_layer > 0) |
| return; |
| |
| /* On gen8, we don't have a concept of default clear colors because we |
| * can't sample from CCS surfaces. It's enough to just load the fast clear |
| * state into the predicate register. |
| */ |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC0), fast_clear_type_mem); |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC1), gen_mi_imm(0)); |
| gen_mi_store(&b, fast_clear_type_mem, gen_mi_imm(0)); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOADINV; |
| mip.CombineOperation = COMBINE_SET; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| } |
| #endif /* GEN_GEN <= 8 */ |
| |
| static void |
| anv_cmd_predicated_ccs_resolve(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| enum isl_format format, |
| VkImageAspectFlagBits aspect, |
| uint32_t level, uint32_t array_layer, |
| enum isl_aux_op resolve_op, |
| enum anv_fast_clear_type fast_clear_supported) |
| { |
| const uint32_t plane = anv_image_aspect_to_plane(image->aspects, aspect); |
| |
| #if GEN_GEN >= 9 |
| anv_cmd_compute_resolve_predicate(cmd_buffer, image, |
| aspect, level, array_layer, |
| resolve_op, fast_clear_supported); |
| #else /* GEN_GEN <= 8 */ |
| anv_cmd_simple_resolve_predicate(cmd_buffer, image, |
| aspect, level, array_layer, |
| resolve_op, fast_clear_supported); |
| #endif |
| |
| /* CCS_D only supports full resolves and BLORP will assert on us if we try |
| * to do a partial resolve on a CCS_D surface. |
| */ |
| if (resolve_op == ISL_AUX_OP_PARTIAL_RESOLVE && |
| image->planes[plane].aux_usage == ISL_AUX_USAGE_NONE) |
| resolve_op = ISL_AUX_OP_FULL_RESOLVE; |
| |
| anv_image_ccs_op(cmd_buffer, image, format, aspect, level, |
| array_layer, 1, resolve_op, NULL, true); |
| } |
| |
| static void |
| anv_cmd_predicated_mcs_resolve(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| enum isl_format format, |
| VkImageAspectFlagBits aspect, |
| uint32_t array_layer, |
| enum isl_aux_op resolve_op, |
| enum anv_fast_clear_type fast_clear_supported) |
| { |
| assert(aspect == VK_IMAGE_ASPECT_COLOR_BIT); |
| assert(resolve_op == ISL_AUX_OP_PARTIAL_RESOLVE); |
| |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| anv_cmd_compute_resolve_predicate(cmd_buffer, image, |
| aspect, 0, array_layer, |
| resolve_op, fast_clear_supported); |
| |
| anv_image_mcs_op(cmd_buffer, image, format, aspect, |
| array_layer, 1, resolve_op, NULL, true); |
| #else |
| unreachable("MCS resolves are unsupported on Ivybridge and Bay Trail"); |
| #endif |
| } |
| |
| void |
| genX(cmd_buffer_mark_image_written)(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| VkImageAspectFlagBits aspect, |
| enum isl_aux_usage aux_usage, |
| uint32_t level, |
| uint32_t base_layer, |
| uint32_t layer_count) |
| { |
| /* The aspect must be exactly one of the image aspects. */ |
| assert(util_bitcount(aspect) == 1 && (aspect & image->aspects)); |
| |
| /* The only compression types with more than just fast-clears are MCS, |
| * CCS_E, and HiZ. With HiZ we just trust the layout and don't actually |
| * track the current fast-clear and compression state. This leaves us |
| * with just MCS and CCS_E. |
| */ |
| if (aux_usage != ISL_AUX_USAGE_CCS_E && |
| aux_usage != ISL_AUX_USAGE_MCS) |
| return; |
| |
| set_image_compressed_bit(cmd_buffer, image, aspect, |
| level, base_layer, layer_count, true); |
| } |
| |
| static void |
| init_fast_clear_color(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| VkImageAspectFlagBits aspect) |
| { |
| assert(cmd_buffer && image); |
| assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV); |
| |
| set_image_fast_clear_state(cmd_buffer, image, aspect, |
| ANV_FAST_CLEAR_NONE); |
| |
| /* Initialize the struct fields that are accessed for fast-clears so that |
| * the HW restrictions on the field values are satisfied. |
| */ |
| struct anv_address addr = |
| anv_image_get_clear_color_addr(cmd_buffer->device, image, aspect); |
| |
| if (GEN_GEN >= 9) { |
| const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev; |
| const unsigned num_dwords = GEN_GEN >= 10 ? |
| isl_dev->ss.clear_color_state_size / 4 : |
| isl_dev->ss.clear_value_size / 4; |
| for (unsigned i = 0; i < num_dwords; i++) { |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_DATA_IMM), sdi) { |
| sdi.Address = addr; |
| sdi.Address.offset += i * 4; |
| sdi.ImmediateData = 0; |
| } |
| } |
| } else { |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_DATA_IMM), sdi) { |
| sdi.Address = addr; |
| if (GEN_GEN >= 8 || GEN_IS_HASWELL) { |
| /* Pre-SKL, the dword containing the clear values also contains |
| * other fields, so we need to initialize those fields to match the |
| * values that would be in a color attachment. |
| */ |
| sdi.ImmediateData = ISL_CHANNEL_SELECT_RED << 25 | |
| ISL_CHANNEL_SELECT_GREEN << 22 | |
| ISL_CHANNEL_SELECT_BLUE << 19 | |
| ISL_CHANNEL_SELECT_ALPHA << 16; |
| } else if (GEN_GEN == 7) { |
| /* On IVB, the dword containing the clear values also contains |
| * other fields that must be zero or can be zero. |
| */ |
| sdi.ImmediateData = 0; |
| } |
| } |
| } |
| } |
| |
| /* Copy the fast-clear value dword(s) between a surface state object and an |
| * image's fast clear state buffer. |
| */ |
| static void |
| genX(copy_fast_clear_dwords)(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_state surface_state, |
| const struct anv_image *image, |
| VkImageAspectFlagBits aspect, |
| bool copy_from_surface_state) |
| { |
| assert(cmd_buffer && image); |
| assert(image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV); |
| |
| struct anv_address ss_clear_addr = { |
| .bo = cmd_buffer->device->surface_state_pool.block_pool.bo, |
| .offset = surface_state.offset + |
| cmd_buffer->device->isl_dev.ss.clear_value_offset, |
| }; |
| const struct anv_address entry_addr = |
| anv_image_get_clear_color_addr(cmd_buffer->device, image, aspect); |
| unsigned copy_size = cmd_buffer->device->isl_dev.ss.clear_value_size; |
| |
| #if GEN_GEN == 7 |
| /* On gen7, the combination of commands used here(MI_LOAD_REGISTER_MEM |
| * and MI_STORE_REGISTER_MEM) can cause GPU hangs if any rendering is |
| * in-flight when they are issued even if the memory touched is not |
| * currently active for rendering. The weird bit is that it is not the |
| * MI_LOAD/STORE_REGISTER_MEM commands which hang but rather the in-flight |
| * rendering hangs such that the next stalling command after the |
| * MI_LOAD/STORE_REGISTER_MEM commands will catch the hang. |
| * |
| * It is unclear exactly why this hang occurs. Both MI commands come with |
| * warnings about the 3D pipeline but that doesn't seem to fully explain |
| * it. My (Jason's) best theory is that it has something to do with the |
| * fact that we're using a GPU state register as our temporary and that |
| * something with reading/writing it is causing problems. |
| * |
| * In order to work around this issue, we emit a PIPE_CONTROL with the |
| * command streamer stall bit set. |
| */ |
| cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_CS_STALL_BIT; |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| #endif |
| |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| if (copy_from_surface_state) { |
| gen_mi_memcpy(&b, entry_addr, ss_clear_addr, copy_size); |
| } else { |
| gen_mi_memcpy(&b, ss_clear_addr, entry_addr, copy_size); |
| |
| /* Updating a surface state object may require that the state cache be |
| * invalidated. From the SKL PRM, Shared Functions -> State -> State |
| * Caching: |
| * |
| * Whenever the RENDER_SURFACE_STATE object in memory pointed to by |
| * the Binding Table Pointer (BTP) and Binding Table Index (BTI) is |
| * modified [...], the L1 state cache must be invalidated to ensure |
| * the new surface or sampler state is fetched from system memory. |
| * |
| * In testing, SKL doesn't actually seem to need this, but HSW does. |
| */ |
| cmd_buffer->state.pending_pipe_bits |= |
| ANV_PIPE_STATE_CACHE_INVALIDATE_BIT; |
| } |
| } |
| |
| /** |
| * @brief Transitions a color buffer from one layout to another. |
| * |
| * See section 6.1.1. Image Layout Transitions of the Vulkan 1.0.50 spec for |
| * more information. |
| * |
| * @param level_count VK_REMAINING_MIP_LEVELS isn't supported. |
| * @param layer_count VK_REMAINING_ARRAY_LAYERS isn't supported. For 3D images, |
| * this represents the maximum layers to transition at each |
| * specified miplevel. |
| */ |
| static void |
| transition_color_buffer(struct anv_cmd_buffer *cmd_buffer, |
| const struct anv_image *image, |
| VkImageAspectFlagBits aspect, |
| const uint32_t base_level, uint32_t level_count, |
| uint32_t base_layer, uint32_t layer_count, |
| VkImageLayout initial_layout, |
| VkImageLayout final_layout) |
| { |
| const struct gen_device_info *devinfo = &cmd_buffer->device->info; |
| /* Validate the inputs. */ |
| assert(cmd_buffer); |
| assert(image && image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV); |
| /* These values aren't supported for simplicity's sake. */ |
| assert(level_count != VK_REMAINING_MIP_LEVELS && |
| layer_count != VK_REMAINING_ARRAY_LAYERS); |
| /* Ensure the subresource range is valid. */ |
| UNUSED uint64_t last_level_num = base_level + level_count; |
| const uint32_t max_depth = anv_minify(image->extent.depth, base_level); |
| UNUSED const uint32_t image_layers = MAX2(image->array_size, max_depth); |
| assert((uint64_t)base_layer + layer_count <= image_layers); |
| assert(last_level_num <= image->levels); |
| /* The spec disallows these final layouts. */ |
| assert(final_layout != VK_IMAGE_LAYOUT_UNDEFINED && |
| final_layout != VK_IMAGE_LAYOUT_PREINITIALIZED); |
| |
| /* No work is necessary if the layout stays the same or if this subresource |
| * range lacks auxiliary data. |
| */ |
| if (initial_layout == final_layout) |
| return; |
| |
| uint32_t plane = anv_image_aspect_to_plane(image->aspects, aspect); |
| |
| if (image->planes[plane].shadow_surface.isl.size_B > 0 && |
| final_layout == VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL) { |
| /* This surface is a linear compressed image with a tiled shadow surface |
| * for texturing. The client is about to use it in READ_ONLY_OPTIMAL so |
| * we need to ensure the shadow copy is up-to-date. |
| */ |
| assert(image->aspects == VK_IMAGE_ASPECT_COLOR_BIT); |
| assert(image->planes[plane].surface.isl.tiling == ISL_TILING_LINEAR); |
| assert(image->planes[plane].shadow_surface.isl.tiling != ISL_TILING_LINEAR); |
| assert(isl_format_is_compressed(image->planes[plane].surface.isl.format)); |
| assert(plane == 0); |
| anv_image_copy_to_shadow(cmd_buffer, image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| base_level, level_count, |
| base_layer, layer_count); |
| } |
| |
| if (base_layer >= anv_image_aux_layers(image, aspect, base_level)) |
| return; |
| |
| assert(image->tiling == VK_IMAGE_TILING_OPTIMAL); |
| |
| if (initial_layout == VK_IMAGE_LAYOUT_UNDEFINED || |
| initial_layout == VK_IMAGE_LAYOUT_PREINITIALIZED) { |
| /* A subresource in the undefined layout may have been aliased and |
| * populated with any arrangement of bits. Therefore, we must initialize |
| * the related aux buffer and clear buffer entry with desirable values. |
| * An initial layout of PREINITIALIZED is the same as UNDEFINED for |
| * images with VK_IMAGE_TILING_OPTIMAL. |
| * |
| * Initialize the relevant clear buffer entries. |
| */ |
| if (base_level == 0 && base_layer == 0) |
| init_fast_clear_color(cmd_buffer, image, aspect); |
| |
| /* Initialize the aux buffers to enable correct rendering. In order to |
| * ensure that things such as storage images work correctly, aux buffers |
| * need to be initialized to valid data. |
| * |
| * Having an aux buffer with invalid data is a problem for two reasons: |
| * |
| * 1) Having an invalid value in the buffer can confuse the hardware. |
| * For instance, with CCS_E on SKL, a two-bit CCS value of 2 is |
| * invalid and leads to the hardware doing strange things. It |
| * doesn't hang as far as we can tell but rendering corruption can |
| * occur. |
| * |
| * 2) If this transition is into the GENERAL layout and we then use the |
| * image as a storage image, then we must have the aux buffer in the |
| * pass-through state so that, if we then go to texture from the |
| * image, we get the results of our storage image writes and not the |
| * fast clear color or other random data. |
| * |
| * For CCS both of the problems above are real demonstrable issues. In |
| * that case, the only thing we can do is to perform an ambiguate to |
| * transition the aux surface into the pass-through state. |
| * |
| * For MCS, (2) is never an issue because we don't support multisampled |
| * storage images. In theory, issue (1) is a problem with MCS but we've |
| * never seen it in the wild. For 4x and 16x, all bit patters could, in |
| * theory, be interpreted as something but we don't know that all bit |
| * patterns are actually valid. For 2x and 8x, you could easily end up |
| * with the MCS referring to an invalid plane because not all bits of |
| * the MCS value are actually used. Even though we've never seen issues |
| * in the wild, it's best to play it safe and initialize the MCS. We |
| * can use a fast-clear for MCS because we only ever touch from render |
| * and texture (no image load store). |
| */ |
| if (image->samples == 1) { |
| for (uint32_t l = 0; l < level_count; l++) { |
| const uint32_t level = base_level + l; |
| |
| uint32_t aux_layers = anv_image_aux_layers(image, aspect, level); |
| if (base_layer >= aux_layers) |
| break; /* We will only get fewer layers as level increases */ |
| uint32_t level_layer_count = |
| MIN2(layer_count, aux_layers - base_layer); |
| |
| anv_image_ccs_op(cmd_buffer, image, |
| image->planes[plane].surface.isl.format, |
| aspect, level, base_layer, level_layer_count, |
| ISL_AUX_OP_AMBIGUATE, NULL, false); |
| |
| if (image->planes[plane].aux_usage == ISL_AUX_USAGE_CCS_E) { |
| set_image_compressed_bit(cmd_buffer, image, aspect, |
| level, base_layer, level_layer_count, |
| false); |
| } |
| } |
| } else { |
| if (image->samples == 4 || image->samples == 16) { |
| anv_perf_warn(cmd_buffer->device->instance, image, |
| "Doing a potentially unnecessary fast-clear to " |
| "define an MCS buffer."); |
| } |
| |
| assert(base_level == 0 && level_count == 1); |
| anv_image_mcs_op(cmd_buffer, image, |
| image->planes[plane].surface.isl.format, |
| aspect, base_layer, layer_count, |
| ISL_AUX_OP_FAST_CLEAR, NULL, false); |
| } |
| return; |
| } |
| |
| const enum isl_aux_usage initial_aux_usage = |
| anv_layout_to_aux_usage(devinfo, image, aspect, initial_layout); |
| const enum isl_aux_usage final_aux_usage = |
| anv_layout_to_aux_usage(devinfo, image, aspect, final_layout); |
| |
| /* The current code assumes that there is no mixing of CCS_E and CCS_D. |
| * We can handle transitions between CCS_D/E to and from NONE. What we |
| * don't yet handle is switching between CCS_E and CCS_D within a given |
| * image. Doing so in a performant way requires more detailed aux state |
| * tracking such as what is done in i965. For now, just assume that we |
| * only have one type of compression. |
| */ |
| assert(initial_aux_usage == ISL_AUX_USAGE_NONE || |
| final_aux_usage == ISL_AUX_USAGE_NONE || |
| initial_aux_usage == final_aux_usage); |
| |
| /* If initial aux usage is NONE, there is nothing to resolve */ |
| if (initial_aux_usage == ISL_AUX_USAGE_NONE) |
| return; |
| |
| enum isl_aux_op resolve_op = ISL_AUX_OP_NONE; |
| |
| /* If the initial layout supports more fast clear than the final layout |
| * then we need at least a partial resolve. |
| */ |
| const enum anv_fast_clear_type initial_fast_clear = |
| anv_layout_to_fast_clear_type(devinfo, image, aspect, initial_layout); |
| const enum anv_fast_clear_type final_fast_clear = |
| anv_layout_to_fast_clear_type(devinfo, image, aspect, final_layout); |
| if (final_fast_clear < initial_fast_clear) |
| resolve_op = ISL_AUX_OP_PARTIAL_RESOLVE; |
| |
| if (initial_aux_usage == ISL_AUX_USAGE_CCS_E && |
| final_aux_usage != ISL_AUX_USAGE_CCS_E) |
| resolve_op = ISL_AUX_OP_FULL_RESOLVE; |
| |
| if (resolve_op == ISL_AUX_OP_NONE) |
| return; |
| |
| /* Perform a resolve to synchronize data between the main and aux buffer. |
| * Before we begin, we must satisfy the cache flushing requirement specified |
| * in the Sky Lake PRM Vol. 7, "MCS Buffer for Render Target(s)": |
| * |
| * Any transition from any value in {Clear, Render, Resolve} to a |
| * different value in {Clear, Render, Resolve} requires end of pipe |
| * synchronization. |
| * |
| * We perform a flush of the write cache before and after the clear and |
| * resolve operations to meet this requirement. |
| * |
| * Unlike other drawing, fast clear operations are not properly |
| * synchronized. The first PIPE_CONTROL here likely ensures that the |
| * contents of the previous render or clear hit the render target before we |
| * resolve and the second likely ensures that the resolve is complete before |
| * we do any more rendering or clearing. |
| */ |
| cmd_buffer->state.pending_pipe_bits |= |
| ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT | ANV_PIPE_CS_STALL_BIT; |
| |
| for (uint32_t l = 0; l < level_count; l++) { |
| uint32_t level = base_level + l; |
| |
| uint32_t aux_layers = anv_image_aux_layers(image, aspect, level); |
| if (base_layer >= aux_layers) |
| break; /* We will only get fewer layers as level increases */ |
| uint32_t level_layer_count = |
| MIN2(layer_count, aux_layers - base_layer); |
| |
| for (uint32_t a = 0; a < level_layer_count; a++) { |
| uint32_t array_layer = base_layer + a; |
| if (image->samples == 1) { |
| anv_cmd_predicated_ccs_resolve(cmd_buffer, image, |
| image->planes[plane].surface.isl.format, |
| aspect, level, array_layer, resolve_op, |
| final_fast_clear); |
| } else { |
| /* We only support fast-clear on the first layer so partial |
| * resolves should not be used on other layers as they will use |
| * the clear color stored in memory that is only valid for layer0. |
| */ |
| if (resolve_op == ISL_AUX_OP_PARTIAL_RESOLVE && |
| array_layer != 0) |
| continue; |
| |
| anv_cmd_predicated_mcs_resolve(cmd_buffer, image, |
| image->planes[plane].surface.isl.format, |
| aspect, array_layer, resolve_op, |
| final_fast_clear); |
| } |
| } |
| } |
| |
| cmd_buffer->state.pending_pipe_bits |= |
| ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT | ANV_PIPE_CS_STALL_BIT; |
| } |
| |
| /** |
| * Setup anv_cmd_state::attachments for vkCmdBeginRenderPass. |
| */ |
| static VkResult |
| genX(cmd_buffer_setup_attachments)(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_render_pass *pass, |
| const VkRenderPassBeginInfo *begin) |
| { |
| const struct isl_device *isl_dev = &cmd_buffer->device->isl_dev; |
| struct anv_cmd_state *state = &cmd_buffer->state; |
| struct anv_framebuffer *framebuffer = cmd_buffer->state.framebuffer; |
| |
| vk_free(&cmd_buffer->pool->alloc, state->attachments); |
| |
| if (pass->attachment_count > 0) { |
| state->attachments = vk_alloc(&cmd_buffer->pool->alloc, |
| pass->attachment_count * |
| sizeof(state->attachments[0]), |
| 8, VK_SYSTEM_ALLOCATION_SCOPE_OBJECT); |
| if (state->attachments == NULL) { |
| /* Propagate VK_ERROR_OUT_OF_HOST_MEMORY to vkEndCommandBuffer */ |
| return anv_batch_set_error(&cmd_buffer->batch, |
| VK_ERROR_OUT_OF_HOST_MEMORY); |
| } |
| } else { |
| state->attachments = NULL; |
| } |
| |
| /* Reserve one for the NULL state. */ |
| unsigned num_states = 1; |
| for (uint32_t i = 0; i < pass->attachment_count; ++i) { |
| if (vk_format_is_color(pass->attachments[i].format)) |
| num_states++; |
| |
| if (need_input_attachment_state(&pass->attachments[i])) |
| num_states++; |
| } |
| |
| const uint32_t ss_stride = align_u32(isl_dev->ss.size, isl_dev->ss.align); |
| state->render_pass_states = |
| anv_state_stream_alloc(&cmd_buffer->surface_state_stream, |
| num_states * ss_stride, isl_dev->ss.align); |
| |
| struct anv_state next_state = state->render_pass_states; |
| next_state.alloc_size = isl_dev->ss.size; |
| |
| state->null_surface_state = next_state; |
| next_state.offset += ss_stride; |
| next_state.map += ss_stride; |
| |
| const VkRenderPassAttachmentBeginInfoKHR *begin_attachment = |
| vk_find_struct_const(begin, RENDER_PASS_ATTACHMENT_BEGIN_INFO_KHR); |
| |
| if (begin && !begin_attachment) |
| assert(pass->attachment_count == framebuffer->attachment_count); |
| |
| for (uint32_t i = 0; i < pass->attachment_count; ++i) { |
| if (vk_format_is_color(pass->attachments[i].format)) { |
| state->attachments[i].color.state = next_state; |
| next_state.offset += ss_stride; |
| next_state.map += ss_stride; |
| } |
| |
| if (need_input_attachment_state(&pass->attachments[i])) { |
| state->attachments[i].input.state = next_state; |
| next_state.offset += ss_stride; |
| next_state.map += ss_stride; |
| } |
| |
| if (begin_attachment && begin_attachment->attachmentCount != 0) { |
| assert(begin_attachment->attachmentCount == pass->attachment_count); |
| ANV_FROM_HANDLE(anv_image_view, iview, begin_attachment->pAttachments[i]); |
| cmd_buffer->state.attachments[i].image_view = iview; |
| } else if (framebuffer && i < framebuffer->attachment_count) { |
| cmd_buffer->state.attachments[i].image_view = framebuffer->attachments[i]; |
| } |
| } |
| assert(next_state.offset == state->render_pass_states.offset + |
| state->render_pass_states.alloc_size); |
| |
| if (begin) { |
| isl_null_fill_state(isl_dev, state->null_surface_state.map, |
| isl_extent3d(framebuffer->width, |
| framebuffer->height, |
| framebuffer->layers)); |
| |
| for (uint32_t i = 0; i < pass->attachment_count; ++i) { |
| struct anv_render_pass_attachment *att = &pass->attachments[i]; |
| VkImageAspectFlags att_aspects = vk_format_aspects(att->format); |
| VkImageAspectFlags clear_aspects = 0; |
| VkImageAspectFlags load_aspects = 0; |
| |
| if (att_aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) { |
| /* color attachment */ |
| if (att->load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) { |
| clear_aspects |= VK_IMAGE_ASPECT_COLOR_BIT; |
| } else if (att->load_op == VK_ATTACHMENT_LOAD_OP_LOAD) { |
| load_aspects |= VK_IMAGE_ASPECT_COLOR_BIT; |
| } |
| } else { |
| /* depthstencil attachment */ |
| if (att_aspects & VK_IMAGE_ASPECT_DEPTH_BIT) { |
| if (att->load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) { |
| clear_aspects |= VK_IMAGE_ASPECT_DEPTH_BIT; |
| } else if (att->load_op == VK_ATTACHMENT_LOAD_OP_LOAD) { |
| load_aspects |= VK_IMAGE_ASPECT_DEPTH_BIT; |
| } |
| } |
| if (att_aspects & VK_IMAGE_ASPECT_STENCIL_BIT) { |
| if (att->stencil_load_op == VK_ATTACHMENT_LOAD_OP_CLEAR) { |
| clear_aspects |= VK_IMAGE_ASPECT_STENCIL_BIT; |
| } else if (att->stencil_load_op == VK_ATTACHMENT_LOAD_OP_LOAD) { |
| load_aspects |= VK_IMAGE_ASPECT_STENCIL_BIT; |
| } |
| } |
| } |
| |
| state->attachments[i].current_layout = att->initial_layout; |
| state->attachments[i].pending_clear_aspects = clear_aspects; |
| state->attachments[i].pending_load_aspects = load_aspects; |
| if (clear_aspects) |
| state->attachments[i].clear_value = begin->pClearValues[i]; |
| |
| struct anv_image_view *iview = cmd_buffer->state.attachments[i].image_view; |
| anv_assert(iview->vk_format == att->format); |
| |
| const uint32_t num_layers = iview->planes[0].isl.array_len; |
| state->attachments[i].pending_clear_views = (1 << num_layers) - 1; |
| |
| union isl_color_value clear_color = { .u32 = { 0, } }; |
| if (att_aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) { |
| anv_assert(iview->n_planes == 1); |
| assert(att_aspects == VK_IMAGE_ASPECT_COLOR_BIT); |
| color_attachment_compute_aux_usage(cmd_buffer->device, |
| state, i, begin->renderArea, |
| &clear_color); |
| |
| anv_image_fill_surface_state(cmd_buffer->device, |
| iview->image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| &iview->planes[0].isl, |
| ISL_SURF_USAGE_RENDER_TARGET_BIT, |
| state->attachments[i].aux_usage, |
| &clear_color, |
| 0, |
| &state->attachments[i].color, |
| NULL); |
| |
| add_surface_state_relocs(cmd_buffer, state->attachments[i].color); |
| } else { |
| depth_stencil_attachment_compute_aux_usage(cmd_buffer->device, |
| state, i, |
| begin->renderArea); |
| } |
| |
| if (need_input_attachment_state(&pass->attachments[i])) { |
| anv_image_fill_surface_state(cmd_buffer->device, |
| iview->image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| &iview->planes[0].isl, |
| ISL_SURF_USAGE_TEXTURE_BIT, |
| state->attachments[i].input_aux_usage, |
| &clear_color, |
| 0, |
| &state->attachments[i].input, |
| NULL); |
| |
| add_surface_state_relocs(cmd_buffer, state->attachments[i].input); |
| } |
| } |
| } |
| |
| return VK_SUCCESS; |
| } |
| |
| VkResult |
| genX(BeginCommandBuffer)( |
| VkCommandBuffer commandBuffer, |
| const VkCommandBufferBeginInfo* pBeginInfo) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| |
| /* If this is the first vkBeginCommandBuffer, we must *initialize* the |
| * command buffer's state. Otherwise, we must *reset* its state. In both |
| * cases we reset it. |
| * |
| * From the Vulkan 1.0 spec: |
| * |
| * If a command buffer is in the executable state and the command buffer |
| * was allocated from a command pool with the |
| * VK_COMMAND_POOL_CREATE_RESET_COMMAND_BUFFER_BIT flag set, then |
| * vkBeginCommandBuffer implicitly resets the command buffer, behaving |
| * as if vkResetCommandBuffer had been called with |
| * VK_COMMAND_BUFFER_RESET_RELEASE_RESOURCES_BIT not set. It then puts |
| * the command buffer in the recording state. |
| */ |
| anv_cmd_buffer_reset(cmd_buffer); |
| |
| cmd_buffer->usage_flags = pBeginInfo->flags; |
| |
| assert(cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_SECONDARY || |
| !(cmd_buffer->usage_flags & VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT)); |
| |
| genX(cmd_buffer_emit_state_base_address)(cmd_buffer); |
| |
| /* We sometimes store vertex data in the dynamic state buffer for blorp |
| * operations and our dynamic state stream may re-use data from previous |
| * command buffers. In order to prevent stale cache data, we flush the VF |
| * cache. We could do this on every blorp call but that's not really |
| * needed as all of the data will get written by the CPU prior to the GPU |
| * executing anything. The chances are fairly high that they will use |
| * blorp at least once per primary command buffer so it shouldn't be |
| * wasted. |
| */ |
| if (cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY) |
| cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_VF_CACHE_INVALIDATE_BIT; |
| |
| /* We send an "Indirect State Pointers Disable" packet at |
| * EndCommandBuffer, so all push contant packets are ignored during a |
| * context restore. Documentation says after that command, we need to |
| * emit push constants again before any rendering operation. So we |
| * flag them dirty here to make sure they get emitted. |
| */ |
| cmd_buffer->state.push_constants_dirty |= VK_SHADER_STAGE_ALL_GRAPHICS; |
| |
| VkResult result = VK_SUCCESS; |
| if (cmd_buffer->usage_flags & |
| VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT) { |
| assert(pBeginInfo->pInheritanceInfo); |
| cmd_buffer->state.pass = |
| anv_render_pass_from_handle(pBeginInfo->pInheritanceInfo->renderPass); |
| cmd_buffer->state.subpass = |
| &cmd_buffer->state.pass->subpasses[pBeginInfo->pInheritanceInfo->subpass]; |
| |
| /* This is optional in the inheritance info. */ |
| cmd_buffer->state.framebuffer = |
| anv_framebuffer_from_handle(pBeginInfo->pInheritanceInfo->framebuffer); |
| |
| result = genX(cmd_buffer_setup_attachments)(cmd_buffer, |
| cmd_buffer->state.pass, NULL); |
| |
| /* Record that HiZ is enabled if we can. */ |
| if (cmd_buffer->state.framebuffer) { |
| const struct anv_image_view * const iview = |
| anv_cmd_buffer_get_depth_stencil_view(cmd_buffer); |
| |
| if (iview) { |
| VkImageLayout layout = |
| cmd_buffer->state.subpass->depth_stencil_attachment->layout; |
| |
| enum isl_aux_usage aux_usage = |
| anv_layout_to_aux_usage(&cmd_buffer->device->info, iview->image, |
| VK_IMAGE_ASPECT_DEPTH_BIT, layout); |
| |
| cmd_buffer->state.hiz_enabled = aux_usage == ISL_AUX_USAGE_HIZ; |
| } |
| } |
| |
| cmd_buffer->state.gfx.dirty |= ANV_CMD_DIRTY_RENDER_TARGETS; |
| } |
| |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| if (cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_SECONDARY) { |
| const VkCommandBufferInheritanceConditionalRenderingInfoEXT *conditional_rendering_info = |
| vk_find_struct_const(pBeginInfo->pInheritanceInfo->pNext, COMMAND_BUFFER_INHERITANCE_CONDITIONAL_RENDERING_INFO_EXT); |
| |
| /* If secondary buffer supports conditional rendering |
| * we should emit commands as if conditional rendering is enabled. |
| */ |
| cmd_buffer->state.conditional_render_enabled = |
| conditional_rendering_info && conditional_rendering_info->conditionalRenderingEnable; |
| } |
| #endif |
| |
| return result; |
| } |
| |
| /* From the PRM, Volume 2a: |
| * |
| * "Indirect State Pointers Disable |
| * |
| * At the completion of the post-sync operation associated with this pipe |
| * control packet, the indirect state pointers in the hardware are |
| * considered invalid; the indirect pointers are not saved in the context. |
| * If any new indirect state commands are executed in the command stream |
| * while the pipe control is pending, the new indirect state commands are |
| * preserved. |
| * |
| * [DevIVB+]: Using Invalidate State Pointer (ISP) only inhibits context |
| * restoring of Push Constant (3DSTATE_CONSTANT_*) commands. Push Constant |
| * commands are only considered as Indirect State Pointers. Once ISP is |
| * issued in a context, SW must initialize by programming push constant |
| * commands for all the shaders (at least to zero length) before attempting |
| * any rendering operation for the same context." |
| * |
| * 3DSTATE_CONSTANT_* packets are restored during a context restore, |
| * even though they point to a BO that has been already unreferenced at |
| * the end of the previous batch buffer. This has been fine so far since |
| * we are protected by these scratch page (every address not covered by |
| * a BO should be pointing to the scratch page). But on CNL, it is |
| * causing a GPU hang during context restore at the 3DSTATE_CONSTANT_* |
| * instruction. |
| * |
| * The flag "Indirect State Pointers Disable" in PIPE_CONTROL tells the |
| * hardware to ignore previous 3DSTATE_CONSTANT_* packets during a |
| * context restore, so the mentioned hang doesn't happen. However, |
| * software must program push constant commands for all stages prior to |
| * rendering anything. So we flag them dirty in BeginCommandBuffer. |
| * |
| * Finally, we also make sure to stall at pixel scoreboard to make sure the |
| * constants have been loaded into the EUs prior to disable the push constants |
| * so that it doesn't hang a previous 3DPRIMITIVE. |
| */ |
| static void |
| emit_isp_disable(struct anv_cmd_buffer *cmd_buffer) |
| { |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.StallAtPixelScoreboard = true; |
| pc.CommandStreamerStallEnable = true; |
| } |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.IndirectStatePointersDisable = true; |
| pc.CommandStreamerStallEnable = true; |
| } |
| } |
| |
| VkResult |
| genX(EndCommandBuffer)( |
| VkCommandBuffer commandBuffer) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return cmd_buffer->batch.status; |
| |
| /* We want every command buffer to start with the PMA fix in a known state, |
| * so we disable it at the end of the command buffer. |
| */ |
| genX(cmd_buffer_enable_pma_fix)(cmd_buffer, false); |
| |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| |
| emit_isp_disable(cmd_buffer); |
| |
| anv_cmd_buffer_end_batch_buffer(cmd_buffer); |
| |
| return VK_SUCCESS; |
| } |
| |
| void |
| genX(CmdExecuteCommands)( |
| VkCommandBuffer commandBuffer, |
| uint32_t commandBufferCount, |
| const VkCommandBuffer* pCmdBuffers) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, primary, commandBuffer); |
| |
| assert(primary->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY); |
| |
| if (anv_batch_has_error(&primary->batch)) |
| return; |
| |
| /* The secondary command buffers will assume that the PMA fix is disabled |
| * when they begin executing. Make sure this is true. |
| */ |
| genX(cmd_buffer_enable_pma_fix)(primary, false); |
| |
| /* The secondary command buffer doesn't know which textures etc. have been |
| * flushed prior to their execution. Apply those flushes now. |
| */ |
| genX(cmd_buffer_apply_pipe_flushes)(primary); |
| |
| for (uint32_t i = 0; i < commandBufferCount; i++) { |
| ANV_FROM_HANDLE(anv_cmd_buffer, secondary, pCmdBuffers[i]); |
| |
| assert(secondary->level == VK_COMMAND_BUFFER_LEVEL_SECONDARY); |
| assert(!anv_batch_has_error(&secondary->batch)); |
| |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| if (secondary->state.conditional_render_enabled) { |
| if (!primary->state.conditional_render_enabled) { |
| /* Secondary buffer is constructed as if it will be executed |
| * with conditional rendering, we should satisfy this dependency |
| * regardless of conditional rendering being enabled in primary. |
| */ |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &primary->batch); |
| gen_mi_store(&b, gen_mi_reg64(ANV_PREDICATE_RESULT_REG), |
| gen_mi_imm(UINT64_MAX)); |
| } |
| } |
| #endif |
| |
| if (secondary->usage_flags & |
| VK_COMMAND_BUFFER_USAGE_RENDER_PASS_CONTINUE_BIT) { |
| /* If we're continuing a render pass from the primary, we need to |
| * copy the surface states for the current subpass into the storage |
| * we allocated for them in BeginCommandBuffer. |
| */ |
| struct anv_bo *ss_bo = |
| primary->device->surface_state_pool.block_pool.bo; |
| struct anv_state src_state = primary->state.render_pass_states; |
| struct anv_state dst_state = secondary->state.render_pass_states; |
| assert(src_state.alloc_size == dst_state.alloc_size); |
| |
| genX(cmd_buffer_so_memcpy)(primary, |
| (struct anv_address) { |
| .bo = ss_bo, |
| .offset = dst_state.offset, |
| }, |
| (struct anv_address) { |
| .bo = ss_bo, |
| .offset = src_state.offset, |
| }, |
| src_state.alloc_size); |
| } |
| |
| anv_cmd_buffer_add_secondary(primary, secondary); |
| } |
| |
| /* The secondary may have selected a different pipeline (3D or compute) and |
| * may have changed the current L3$ configuration. Reset our tracking |
| * variables to invalid values to ensure that we re-emit these in the case |
| * where we do any draws or compute dispatches from the primary after the |
| * secondary has returned. |
| */ |
| primary->state.current_pipeline = UINT32_MAX; |
| primary->state.current_l3_config = NULL; |
| primary->state.current_hash_scale = 0; |
| |
| /* Each of the secondary command buffers will use its own state base |
| * address. We need to re-emit state base address for the primary after |
| * all of the secondaries are done. |
| * |
| * TODO: Maybe we want to make this a dirty bit to avoid extra state base |
| * address calls? |
| */ |
| genX(cmd_buffer_emit_state_base_address)(primary); |
| } |
| |
| #define IVB_L3SQCREG1_SQGHPCI_DEFAULT 0x00730000 |
| #define VLV_L3SQCREG1_SQGHPCI_DEFAULT 0x00d30000 |
| #define HSW_L3SQCREG1_SQGHPCI_DEFAULT 0x00610000 |
| |
| /** |
| * Program the hardware to use the specified L3 configuration. |
| */ |
| void |
| genX(cmd_buffer_config_l3)(struct anv_cmd_buffer *cmd_buffer, |
| const struct gen_l3_config *cfg) |
| { |
| assert(cfg); |
| if (cfg == cmd_buffer->state.current_l3_config) |
| return; |
| |
| if (unlikely(INTEL_DEBUG & DEBUG_L3)) { |
| intel_logd("L3 config transition: "); |
| gen_dump_l3_config(cfg, stderr); |
| } |
| |
| const bool has_slm = cfg->n[GEN_L3P_SLM]; |
| |
| /* According to the hardware docs, the L3 partitioning can only be changed |
| * while the pipeline is completely drained and the caches are flushed, |
| * which involves a first PIPE_CONTROL flush which stalls the pipeline... |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.DCFlushEnable = true; |
| pc.PostSyncOperation = NoWrite; |
| pc.CommandStreamerStallEnable = true; |
| } |
| |
| /* ...followed by a second pipelined PIPE_CONTROL that initiates |
| * invalidation of the relevant caches. Note that because RO invalidation |
| * happens at the top of the pipeline (i.e. right away as the PIPE_CONTROL |
| * command is processed by the CS) we cannot combine it with the previous |
| * stalling flush as the hardware documentation suggests, because that |
| * would cause the CS to stall on previous rendering *after* RO |
| * invalidation and wouldn't prevent the RO caches from being polluted by |
| * concurrent rendering before the stall completes. This intentionally |
| * doesn't implement the SKL+ hardware workaround suggesting to enable CS |
| * stall on PIPE_CONTROLs with the texture cache invalidation bit set for |
| * GPGPU workloads because the previous and subsequent PIPE_CONTROLs |
| * already guarantee that there is no concurrent GPGPU kernel execution |
| * (see SKL HSD 2132585). |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.TextureCacheInvalidationEnable = true; |
| pc.ConstantCacheInvalidationEnable = true; |
| pc.InstructionCacheInvalidateEnable = true; |
| pc.StateCacheInvalidationEnable = true; |
| pc.PostSyncOperation = NoWrite; |
| } |
| |
| /* Now send a third stalling flush to make sure that invalidation is |
| * complete when the L3 configuration registers are modified. |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.DCFlushEnable = true; |
| pc.PostSyncOperation = NoWrite; |
| pc.CommandStreamerStallEnable = true; |
| } |
| |
| #if GEN_GEN >= 8 |
| |
| assert(!cfg->n[GEN_L3P_IS] && !cfg->n[GEN_L3P_C] && !cfg->n[GEN_L3P_T]); |
| |
| uint32_t l3cr; |
| anv_pack_struct(&l3cr, GENX(L3CNTLREG), |
| .SLMEnable = has_slm, |
| #if GEN_GEN == 11 |
| /* WA_1406697149: Bit 9 "Error Detection Behavior Control" must be set |
| * in L3CNTLREG register. The default setting of the bit is not the |
| * desirable behavior. |
| */ |
| .ErrorDetectionBehaviorControl = true, |
| .UseFullWays = true, |
| #endif |
| .URBAllocation = cfg->n[GEN_L3P_URB], |
| .ROAllocation = cfg->n[GEN_L3P_RO], |
| .DCAllocation = cfg->n[GEN_L3P_DC], |
| .AllAllocation = cfg->n[GEN_L3P_ALL]); |
| |
| /* Set up the L3 partitioning. */ |
| emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG_num), l3cr); |
| |
| #else |
| |
| const bool has_dc = cfg->n[GEN_L3P_DC] || cfg->n[GEN_L3P_ALL]; |
| const bool has_is = cfg->n[GEN_L3P_IS] || cfg->n[GEN_L3P_RO] || |
| cfg->n[GEN_L3P_ALL]; |
| const bool has_c = cfg->n[GEN_L3P_C] || cfg->n[GEN_L3P_RO] || |
| cfg->n[GEN_L3P_ALL]; |
| const bool has_t = cfg->n[GEN_L3P_T] || cfg->n[GEN_L3P_RO] || |
| cfg->n[GEN_L3P_ALL]; |
| |
| assert(!cfg->n[GEN_L3P_ALL]); |
| |
| /* When enabled SLM only uses a portion of the L3 on half of the banks, |
| * the matching space on the remaining banks has to be allocated to a |
| * client (URB for all validated configurations) set to the |
| * lower-bandwidth 2-bank address hashing mode. |
| */ |
| const struct gen_device_info *devinfo = &cmd_buffer->device->info; |
| const bool urb_low_bw = has_slm && !devinfo->is_baytrail; |
| assert(!urb_low_bw || cfg->n[GEN_L3P_URB] == cfg->n[GEN_L3P_SLM]); |
| |
| /* Minimum number of ways that can be allocated to the URB. */ |
| const unsigned n0_urb = devinfo->is_baytrail ? 32 : 0; |
| assert(cfg->n[GEN_L3P_URB] >= n0_urb); |
| |
| uint32_t l3sqcr1, l3cr2, l3cr3; |
| anv_pack_struct(&l3sqcr1, GENX(L3SQCREG1), |
| .ConvertDC_UC = !has_dc, |
| .ConvertIS_UC = !has_is, |
| .ConvertC_UC = !has_c, |
| .ConvertT_UC = !has_t); |
| l3sqcr1 |= |
| GEN_IS_HASWELL ? HSW_L3SQCREG1_SQGHPCI_DEFAULT : |
| devinfo->is_baytrail ? VLV_L3SQCREG1_SQGHPCI_DEFAULT : |
| IVB_L3SQCREG1_SQGHPCI_DEFAULT; |
| |
| anv_pack_struct(&l3cr2, GENX(L3CNTLREG2), |
| .SLMEnable = has_slm, |
| .URBLowBandwidth = urb_low_bw, |
| .URBAllocation = cfg->n[GEN_L3P_URB] - n0_urb, |
| #if !GEN_IS_HASWELL |
| .ALLAllocation = cfg->n[GEN_L3P_ALL], |
| #endif |
| .ROAllocation = cfg->n[GEN_L3P_RO], |
| .DCAllocation = cfg->n[GEN_L3P_DC]); |
| |
| anv_pack_struct(&l3cr3, GENX(L3CNTLREG3), |
| .ISAllocation = cfg->n[GEN_L3P_IS], |
| .ISLowBandwidth = 0, |
| .CAllocation = cfg->n[GEN_L3P_C], |
| .CLowBandwidth = 0, |
| .TAllocation = cfg->n[GEN_L3P_T], |
| .TLowBandwidth = 0); |
| |
| /* Set up the L3 partitioning. */ |
| emit_lri(&cmd_buffer->batch, GENX(L3SQCREG1_num), l3sqcr1); |
| emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG2_num), l3cr2); |
| emit_lri(&cmd_buffer->batch, GENX(L3CNTLREG3_num), l3cr3); |
| |
| #if GEN_IS_HASWELL |
| if (cmd_buffer->device->instance->physicalDevice.cmd_parser_version >= 4) { |
| /* Enable L3 atomics on HSW if we have a DC partition, otherwise keep |
| * them disabled to avoid crashing the system hard. |
| */ |
| uint32_t scratch1, chicken3; |
| anv_pack_struct(&scratch1, GENX(SCRATCH1), |
| .L3AtomicDisable = !has_dc); |
| anv_pack_struct(&chicken3, GENX(CHICKEN3), |
| .L3AtomicDisableMask = true, |
| .L3AtomicDisable = !has_dc); |
| emit_lri(&cmd_buffer->batch, GENX(SCRATCH1_num), scratch1); |
| emit_lri(&cmd_buffer->batch, GENX(CHICKEN3_num), chicken3); |
| } |
| #endif |
| |
| #endif |
| |
| cmd_buffer->state.current_l3_config = cfg; |
| } |
| |
| void |
| genX(cmd_buffer_apply_pipe_flushes)(struct anv_cmd_buffer *cmd_buffer) |
| { |
| enum anv_pipe_bits bits = cmd_buffer->state.pending_pipe_bits; |
| |
| /* Flushes are pipelined while invalidations are handled immediately. |
| * Therefore, if we're flushing anything then we need to schedule a stall |
| * before any invalidations can happen. |
| */ |
| if (bits & ANV_PIPE_FLUSH_BITS) |
| bits |= ANV_PIPE_NEEDS_CS_STALL_BIT; |
| |
| /* If we're going to do an invalidate and we have a pending CS stall that |
| * has yet to be resolved, we do the CS stall now. |
| */ |
| if ((bits & ANV_PIPE_INVALIDATE_BITS) && |
| (bits & ANV_PIPE_NEEDS_CS_STALL_BIT)) { |
| bits |= ANV_PIPE_CS_STALL_BIT; |
| bits &= ~ANV_PIPE_NEEDS_CS_STALL_BIT; |
| } |
| |
| if (bits & (ANV_PIPE_FLUSH_BITS | ANV_PIPE_CS_STALL_BIT)) { |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) { |
| pipe.DepthCacheFlushEnable = bits & ANV_PIPE_DEPTH_CACHE_FLUSH_BIT; |
| pipe.DCFlushEnable = bits & ANV_PIPE_DATA_CACHE_FLUSH_BIT; |
| pipe.RenderTargetCacheFlushEnable = |
| bits & ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT; |
| |
| pipe.DepthStallEnable = bits & ANV_PIPE_DEPTH_STALL_BIT; |
| pipe.CommandStreamerStallEnable = bits & ANV_PIPE_CS_STALL_BIT; |
| pipe.StallAtPixelScoreboard = bits & ANV_PIPE_STALL_AT_SCOREBOARD_BIT; |
| |
| /* |
| * According to the Broadwell documentation, any PIPE_CONTROL with the |
| * "Command Streamer Stall" bit set must also have another bit set, |
| * with five different options: |
| * |
| * - Render Target Cache Flush |
| * - Depth Cache Flush |
| * - Stall at Pixel Scoreboard |
| * - Post-Sync Operation |
| * - Depth Stall |
| * - DC Flush Enable |
| * |
| * I chose "Stall at Pixel Scoreboard" since that's what we use in |
| * mesa and it seems to work fine. The choice is fairly arbitrary. |
| */ |
| if ((bits & ANV_PIPE_CS_STALL_BIT) && |
| !(bits & (ANV_PIPE_FLUSH_BITS | ANV_PIPE_DEPTH_STALL_BIT | |
| ANV_PIPE_STALL_AT_SCOREBOARD_BIT))) |
| pipe.StallAtPixelScoreboard = true; |
| } |
| |
| /* If a render target flush was emitted, then we can toggle off the bit |
| * saying that render target writes are ongoing. |
| */ |
| if (bits & ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT) |
| bits &= ~(ANV_PIPE_RENDER_TARGET_BUFFER_WRITES); |
| |
| bits &= ~(ANV_PIPE_FLUSH_BITS | ANV_PIPE_CS_STALL_BIT); |
| } |
| |
| if (bits & ANV_PIPE_INVALIDATE_BITS) { |
| /* From the SKL PRM, Vol. 2a, "PIPE_CONTROL", |
| * |
| * "If the VF Cache Invalidation Enable is set to a 1 in a |
| * PIPE_CONTROL, a separate Null PIPE_CONTROL, all bitfields sets to |
| * 0, with the VF Cache Invalidation Enable set to 0 needs to be sent |
| * prior to the PIPE_CONTROL with VF Cache Invalidation Enable set to |
| * a 1." |
| * |
| * This appears to hang Broadwell, so we restrict it to just gen9. |
| */ |
| if (GEN_GEN == 9 && (bits & ANV_PIPE_VF_CACHE_INVALIDATE_BIT)) |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) { |
| pipe.StateCacheInvalidationEnable = |
| bits & ANV_PIPE_STATE_CACHE_INVALIDATE_BIT; |
| pipe.ConstantCacheInvalidationEnable = |
| bits & ANV_PIPE_CONSTANT_CACHE_INVALIDATE_BIT; |
| pipe.VFCacheInvalidationEnable = |
| bits & ANV_PIPE_VF_CACHE_INVALIDATE_BIT; |
| pipe.TextureCacheInvalidationEnable = |
| bits & ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT; |
| pipe.InstructionCacheInvalidateEnable = |
| bits & ANV_PIPE_INSTRUCTION_CACHE_INVALIDATE_BIT; |
| |
| /* From the SKL PRM, Vol. 2a, "PIPE_CONTROL", |
| * |
| * "When VF Cache Invalidate is set “Post Sync Operation” must be |
| * enabled to “Write Immediate Data” or “Write PS Depth Count” or |
| * “Write Timestamp”. |
| */ |
| if (GEN_GEN == 9 && pipe.VFCacheInvalidationEnable) { |
| pipe.PostSyncOperation = WriteImmediateData; |
| pipe.Address = |
| (struct anv_address) { &cmd_buffer->device->workaround_bo, 0 }; |
| } |
| } |
| |
| bits &= ~ANV_PIPE_INVALIDATE_BITS; |
| } |
| |
| cmd_buffer->state.pending_pipe_bits = bits; |
| } |
| |
| void genX(CmdPipelineBarrier)( |
| VkCommandBuffer commandBuffer, |
| VkPipelineStageFlags srcStageMask, |
| VkPipelineStageFlags destStageMask, |
| VkBool32 byRegion, |
| uint32_t memoryBarrierCount, |
| const VkMemoryBarrier* pMemoryBarriers, |
| uint32_t bufferMemoryBarrierCount, |
| const VkBufferMemoryBarrier* pBufferMemoryBarriers, |
| uint32_t imageMemoryBarrierCount, |
| const VkImageMemoryBarrier* pImageMemoryBarriers) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| |
| /* XXX: Right now, we're really dumb and just flush whatever categories |
| * the app asks for. One of these days we may make this a bit better |
| * but right now that's all the hardware allows for in most areas. |
| */ |
| VkAccessFlags src_flags = 0; |
| VkAccessFlags dst_flags = 0; |
| |
| for (uint32_t i = 0; i < memoryBarrierCount; i++) { |
| src_flags |= pMemoryBarriers[i].srcAccessMask; |
| dst_flags |= pMemoryBarriers[i].dstAccessMask; |
| } |
| |
| for (uint32_t i = 0; i < bufferMemoryBarrierCount; i++) { |
| src_flags |= pBufferMemoryBarriers[i].srcAccessMask; |
| dst_flags |= pBufferMemoryBarriers[i].dstAccessMask; |
| } |
| |
| for (uint32_t i = 0; i < imageMemoryBarrierCount; i++) { |
| src_flags |= pImageMemoryBarriers[i].srcAccessMask; |
| dst_flags |= pImageMemoryBarriers[i].dstAccessMask; |
| ANV_FROM_HANDLE(anv_image, image, pImageMemoryBarriers[i].image); |
| const VkImageSubresourceRange *range = |
| &pImageMemoryBarriers[i].subresourceRange; |
| |
| uint32_t base_layer, layer_count; |
| if (image->type == VK_IMAGE_TYPE_3D) { |
| base_layer = 0; |
| layer_count = anv_minify(image->extent.depth, range->baseMipLevel); |
| } else { |
| base_layer = range->baseArrayLayer; |
| layer_count = anv_get_layerCount(image, range); |
| } |
| |
| if (range->aspectMask & VK_IMAGE_ASPECT_DEPTH_BIT) { |
| transition_depth_buffer(cmd_buffer, image, |
| pImageMemoryBarriers[i].oldLayout, |
| pImageMemoryBarriers[i].newLayout); |
| } |
| |
| if (range->aspectMask & VK_IMAGE_ASPECT_STENCIL_BIT) { |
| transition_stencil_buffer(cmd_buffer, image, |
| range->baseMipLevel, |
| anv_get_levelCount(image, range), |
| base_layer, layer_count, |
| pImageMemoryBarriers[i].oldLayout, |
| pImageMemoryBarriers[i].newLayout); |
| } |
| |
| if (range->aspectMask & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) { |
| VkImageAspectFlags color_aspects = |
| anv_image_expand_aspects(image, range->aspectMask); |
| uint32_t aspect_bit; |
| anv_foreach_image_aspect_bit(aspect_bit, image, color_aspects) { |
| transition_color_buffer(cmd_buffer, image, 1UL << aspect_bit, |
| range->baseMipLevel, |
| anv_get_levelCount(image, range), |
| base_layer, layer_count, |
| pImageMemoryBarriers[i].oldLayout, |
| pImageMemoryBarriers[i].newLayout); |
| } |
| } |
| } |
| |
| cmd_buffer->state.pending_pipe_bits |= |
| anv_pipe_flush_bits_for_access_flags(src_flags) | |
| anv_pipe_invalidate_bits_for_access_flags(dst_flags); |
| } |
| |
| static void |
| cmd_buffer_alloc_push_constants(struct anv_cmd_buffer *cmd_buffer) |
| { |
| VkShaderStageFlags stages = |
| cmd_buffer->state.gfx.base.pipeline->active_stages; |
| |
| /* In order to avoid thrash, we assume that vertex and fragment stages |
| * always exist. In the rare case where one is missing *and* the other |
| * uses push concstants, this may be suboptimal. However, avoiding stalls |
| * seems more important. |
| */ |
| stages |= VK_SHADER_STAGE_FRAGMENT_BIT | VK_SHADER_STAGE_VERTEX_BIT; |
| |
| if (stages == cmd_buffer->state.push_constant_stages) |
| return; |
| |
| #if GEN_GEN >= 8 |
| const unsigned push_constant_kb = 32; |
| #elif GEN_IS_HASWELL |
| const unsigned push_constant_kb = cmd_buffer->device->info.gt == 3 ? 32 : 16; |
| #else |
| const unsigned push_constant_kb = 16; |
| #endif |
| |
| const unsigned num_stages = |
| util_bitcount(stages & VK_SHADER_STAGE_ALL_GRAPHICS); |
| unsigned size_per_stage = push_constant_kb / num_stages; |
| |
| /* Broadwell+ and Haswell gt3 require that the push constant sizes be in |
| * units of 2KB. Incidentally, these are the same platforms that have |
| * 32KB worth of push constant space. |
| */ |
| if (push_constant_kb == 32) |
| size_per_stage &= ~1u; |
| |
| uint32_t kb_used = 0; |
| for (int i = MESA_SHADER_VERTEX; i < MESA_SHADER_FRAGMENT; i++) { |
| unsigned push_size = (stages & (1 << i)) ? size_per_stage : 0; |
| anv_batch_emit(&cmd_buffer->batch, |
| GENX(3DSTATE_PUSH_CONSTANT_ALLOC_VS), alloc) { |
| alloc._3DCommandSubOpcode = 18 + i; |
| alloc.ConstantBufferOffset = (push_size > 0) ? kb_used : 0; |
| alloc.ConstantBufferSize = push_size; |
| } |
| kb_used += push_size; |
| } |
| |
| anv_batch_emit(&cmd_buffer->batch, |
| GENX(3DSTATE_PUSH_CONSTANT_ALLOC_PS), alloc) { |
| alloc.ConstantBufferOffset = kb_used; |
| alloc.ConstantBufferSize = push_constant_kb - kb_used; |
| } |
| |
| cmd_buffer->state.push_constant_stages = stages; |
| |
| /* From the BDW PRM for 3DSTATE_PUSH_CONSTANT_ALLOC_VS: |
| * |
| * "The 3DSTATE_CONSTANT_VS must be reprogrammed prior to |
| * the next 3DPRIMITIVE command after programming the |
| * 3DSTATE_PUSH_CONSTANT_ALLOC_VS" |
| * |
| * Since 3DSTATE_PUSH_CONSTANT_ALLOC_VS is programmed as part of |
| * pipeline setup, we need to dirty push constants. |
| */ |
| cmd_buffer->state.push_constants_dirty |= VK_SHADER_STAGE_ALL_GRAPHICS; |
| } |
| |
| static const struct anv_descriptor * |
| anv_descriptor_for_binding(const struct anv_cmd_pipeline_state *pipe_state, |
| const struct anv_pipeline_binding *binding) |
| { |
| assert(binding->set < MAX_SETS); |
| const struct anv_descriptor_set *set = |
| pipe_state->descriptors[binding->set]; |
| const uint32_t offset = |
| set->layout->binding[binding->binding].descriptor_index; |
| return &set->descriptors[offset + binding->index]; |
| } |
| |
| static uint32_t |
| dynamic_offset_for_binding(const struct anv_cmd_pipeline_state *pipe_state, |
| const struct anv_pipeline_binding *binding) |
| { |
| assert(binding->set < MAX_SETS); |
| const struct anv_descriptor_set *set = |
| pipe_state->descriptors[binding->set]; |
| |
| uint32_t dynamic_offset_idx = |
| pipe_state->layout->set[binding->set].dynamic_offset_start + |
| set->layout->binding[binding->binding].dynamic_offset_index + |
| binding->index; |
| |
| return pipe_state->dynamic_offsets[dynamic_offset_idx]; |
| } |
| |
| static struct anv_address |
| anv_descriptor_set_address(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_descriptor_set *set) |
| { |
| if (set->pool) { |
| /* This is a normal descriptor set */ |
| return (struct anv_address) { |
| .bo = &set->pool->bo, |
| .offset = set->desc_mem.offset, |
| }; |
| } else { |
| /* This is a push descriptor set. We have to flag it as used on the GPU |
| * so that the next time we push descriptors, we grab a new memory. |
| */ |
| struct anv_push_descriptor_set *push_set = |
| (struct anv_push_descriptor_set *)set; |
| push_set->set_used_on_gpu = true; |
| |
| return (struct anv_address) { |
| .bo = cmd_buffer->dynamic_state_stream.state_pool->block_pool.bo, |
| .offset = set->desc_mem.offset, |
| }; |
| } |
| } |
| |
| static VkResult |
| emit_binding_table(struct anv_cmd_buffer *cmd_buffer, |
| gl_shader_stage stage, |
| struct anv_state *bt_state) |
| { |
| struct anv_subpass *subpass = cmd_buffer->state.subpass; |
| struct anv_cmd_pipeline_state *pipe_state; |
| struct anv_pipeline *pipeline; |
| uint32_t state_offset; |
| |
| switch (stage) { |
| case MESA_SHADER_COMPUTE: |
| pipe_state = &cmd_buffer->state.compute.base; |
| break; |
| default: |
| pipe_state = &cmd_buffer->state.gfx.base; |
| break; |
| } |
| pipeline = pipe_state->pipeline; |
| |
| if (!anv_pipeline_has_stage(pipeline, stage)) { |
| *bt_state = (struct anv_state) { 0, }; |
| return VK_SUCCESS; |
| } |
| |
| struct anv_pipeline_bind_map *map = &pipeline->shaders[stage]->bind_map; |
| if (map->surface_count == 0) { |
| *bt_state = (struct anv_state) { 0, }; |
| return VK_SUCCESS; |
| } |
| |
| *bt_state = anv_cmd_buffer_alloc_binding_table(cmd_buffer, |
| map->surface_count, |
| &state_offset); |
| uint32_t *bt_map = bt_state->map; |
| |
| if (bt_state->map == NULL) |
| return VK_ERROR_OUT_OF_DEVICE_MEMORY; |
| |
| for (uint32_t s = 0; s < map->surface_count; s++) { |
| struct anv_pipeline_binding *binding = &map->surface_to_descriptor[s]; |
| |
| struct anv_state surface_state; |
| |
| if (binding->set == ANV_DESCRIPTOR_SET_COLOR_ATTACHMENTS) { |
| /* Color attachment binding */ |
| assert(stage == MESA_SHADER_FRAGMENT); |
| assert(binding->binding == 0); |
| if (binding->index < subpass->color_count) { |
| const unsigned att = |
| subpass->color_attachments[binding->index].attachment; |
| |
| /* From the Vulkan 1.0.46 spec: |
| * |
| * "If any color or depth/stencil attachments are |
| * VK_ATTACHMENT_UNUSED, then no writes occur for those |
| * attachments." |
| */ |
| if (att == VK_ATTACHMENT_UNUSED) { |
| surface_state = cmd_buffer->state.null_surface_state; |
| } else { |
| surface_state = cmd_buffer->state.attachments[att].color.state; |
| } |
| } else { |
| surface_state = cmd_buffer->state.null_surface_state; |
| } |
| |
| bt_map[s] = surface_state.offset + state_offset; |
| continue; |
| } else if (binding->set == ANV_DESCRIPTOR_SET_SHADER_CONSTANTS) { |
| struct anv_state surface_state = |
| anv_cmd_buffer_alloc_surface_state(cmd_buffer); |
| |
| struct anv_address constant_data = { |
| .bo = pipeline->device->dynamic_state_pool.block_pool.bo, |
| .offset = pipeline->shaders[stage]->constant_data.offset, |
| }; |
| unsigned constant_data_size = |
| pipeline->shaders[stage]->constant_data_size; |
| |
| const enum isl_format format = |
| anv_isl_format_for_descriptor_type(VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER); |
| anv_fill_buffer_surface_state(cmd_buffer->device, |
| surface_state, format, |
| constant_data, constant_data_size, 1); |
| |
| bt_map[s] = surface_state.offset + state_offset; |
| add_surface_reloc(cmd_buffer, surface_state, constant_data); |
| continue; |
| } else if (binding->set == ANV_DESCRIPTOR_SET_NUM_WORK_GROUPS) { |
| /* This is always the first binding for compute shaders */ |
| assert(stage == MESA_SHADER_COMPUTE && s == 0); |
| if (!get_cs_prog_data(pipeline)->uses_num_work_groups) |
| continue; |
| |
| struct anv_state surface_state = |
| anv_cmd_buffer_alloc_surface_state(cmd_buffer); |
| |
| const enum isl_format format = |
| anv_isl_format_for_descriptor_type(VK_DESCRIPTOR_TYPE_STORAGE_BUFFER); |
| anv_fill_buffer_surface_state(cmd_buffer->device, surface_state, |
| format, |
| cmd_buffer->state.compute.num_workgroups, |
| 12, 1); |
| bt_map[s] = surface_state.offset + state_offset; |
| add_surface_reloc(cmd_buffer, surface_state, |
| cmd_buffer->state.compute.num_workgroups); |
| continue; |
| } else if (binding->set == ANV_DESCRIPTOR_SET_DESCRIPTORS) { |
| /* This is a descriptor set buffer so the set index is actually |
| * given by binding->binding. (Yes, that's confusing.) |
| */ |
| struct anv_descriptor_set *set = |
| pipe_state->descriptors[binding->binding]; |
| assert(set->desc_mem.alloc_size); |
| assert(set->desc_surface_state.alloc_size); |
| bt_map[s] = set->desc_surface_state.offset + state_offset; |
| add_surface_reloc(cmd_buffer, set->desc_surface_state, |
| anv_descriptor_set_address(cmd_buffer, set)); |
| continue; |
| } |
| |
| const struct anv_descriptor *desc = |
| anv_descriptor_for_binding(pipe_state, binding); |
| |
| switch (desc->type) { |
| case VK_DESCRIPTOR_TYPE_SAMPLER: |
| /* Nothing for us to do here */ |
| continue; |
| |
| case VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER: |
| case VK_DESCRIPTOR_TYPE_SAMPLED_IMAGE: { |
| struct anv_surface_state sstate = |
| (desc->layout == VK_IMAGE_LAYOUT_GENERAL) ? |
| desc->image_view->planes[binding->plane].general_sampler_surface_state : |
| desc->image_view->planes[binding->plane].optimal_sampler_surface_state; |
| surface_state = sstate.state; |
| assert(surface_state.alloc_size); |
| add_surface_state_relocs(cmd_buffer, sstate); |
| break; |
| } |
| case VK_DESCRIPTOR_TYPE_INPUT_ATTACHMENT: |
| assert(stage == MESA_SHADER_FRAGMENT); |
| if ((desc->image_view->aspect_mask & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) == 0) { |
| /* For depth and stencil input attachments, we treat it like any |
| * old texture that a user may have bound. |
| */ |
| struct anv_surface_state sstate = |
| (desc->layout == VK_IMAGE_LAYOUT_GENERAL) ? |
| desc->image_view->planes[binding->plane].general_sampler_surface_state : |
| desc->image_view->planes[binding->plane].optimal_sampler_surface_state; |
| surface_state = sstate.state; |
| assert(surface_state.alloc_size); |
| add_surface_state_relocs(cmd_buffer, sstate); |
| } else { |
| /* For color input attachments, we create the surface state at |
| * vkBeginRenderPass time so that we can include aux and clear |
| * color information. |
| */ |
| assert(binding->input_attachment_index < subpass->input_count); |
| const unsigned subpass_att = binding->input_attachment_index; |
| const unsigned att = subpass->input_attachments[subpass_att].attachment; |
| surface_state = cmd_buffer->state.attachments[att].input.state; |
| } |
| break; |
| |
| case VK_DESCRIPTOR_TYPE_STORAGE_IMAGE: { |
| struct anv_surface_state sstate = (binding->write_only) |
| ? desc->image_view->planes[binding->plane].writeonly_storage_surface_state |
| : desc->image_view->planes[binding->plane].storage_surface_state; |
| surface_state = sstate.state; |
| assert(surface_state.alloc_size); |
| add_surface_state_relocs(cmd_buffer, sstate); |
| break; |
| } |
| |
| case VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER: |
| case VK_DESCRIPTOR_TYPE_STORAGE_BUFFER: |
| case VK_DESCRIPTOR_TYPE_UNIFORM_TEXEL_BUFFER: |
| surface_state = desc->buffer_view->surface_state; |
| assert(surface_state.alloc_size); |
| add_surface_reloc(cmd_buffer, surface_state, |
| desc->buffer_view->address); |
| break; |
| |
| case VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC: |
| case VK_DESCRIPTOR_TYPE_STORAGE_BUFFER_DYNAMIC: { |
| /* Compute the offset within the buffer */ |
| uint32_t dynamic_offset = |
| dynamic_offset_for_binding(pipe_state, binding); |
| uint64_t offset = desc->offset + dynamic_offset; |
| /* Clamp to the buffer size */ |
| offset = MIN2(offset, desc->buffer->size); |
| /* Clamp the range to the buffer size */ |
| uint32_t range = MIN2(desc->range, desc->buffer->size - offset); |
| |
| struct anv_address address = |
| anv_address_add(desc->buffer->address, offset); |
| |
| surface_state = |
| anv_state_stream_alloc(&cmd_buffer->surface_state_stream, 64, 64); |
| enum isl_format format = |
| anv_isl_format_for_descriptor_type(desc->type); |
| |
| anv_fill_buffer_surface_state(cmd_buffer->device, surface_state, |
| format, address, range, 1); |
| add_surface_reloc(cmd_buffer, surface_state, address); |
| break; |
| } |
| |
| case VK_DESCRIPTOR_TYPE_STORAGE_TEXEL_BUFFER: |
| surface_state = (binding->write_only) |
| ? desc->buffer_view->writeonly_storage_surface_state |
| : desc->buffer_view->storage_surface_state; |
| assert(surface_state.alloc_size); |
| add_surface_reloc(cmd_buffer, surface_state, |
| desc->buffer_view->address); |
| break; |
| |
| default: |
| assert(!"Invalid descriptor type"); |
| continue; |
| } |
| |
| bt_map[s] = surface_state.offset + state_offset; |
| } |
| |
| #if GEN_GEN >= 11 |
| /* The PIPE_CONTROL command description says: |
| * |
| * "Whenever a Binding Table Index (BTI) used by a Render Taget Message |
| * points to a different RENDER_SURFACE_STATE, SW must issue a Render |
| * Target Cache Flush by enabling this bit. When render target flush |
| * is set due to new association of BTI, PS Scoreboard Stall bit must |
| * be set in this packet." |
| * |
| * FINISHME: Currently we shuffle around the surface states in the binding |
| * table based on if they are getting used or not. So, we've to do below |
| * pipe control flush for every binding table upload. Make changes so |
| * that we do it only when we modify render target surface states. |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.RenderTargetCacheFlushEnable = true; |
| pc.StallAtPixelScoreboard = true; |
| } |
| #endif |
| |
| return VK_SUCCESS; |
| } |
| |
| static VkResult |
| emit_samplers(struct anv_cmd_buffer *cmd_buffer, |
| gl_shader_stage stage, |
| struct anv_state *state) |
| { |
| struct anv_cmd_pipeline_state *pipe_state = |
| stage == MESA_SHADER_COMPUTE ? &cmd_buffer->state.compute.base : |
| &cmd_buffer->state.gfx.base; |
| struct anv_pipeline *pipeline = pipe_state->pipeline; |
| |
| if (!anv_pipeline_has_stage(pipeline, stage)) { |
| *state = (struct anv_state) { 0, }; |
| return VK_SUCCESS; |
| } |
| |
| struct anv_pipeline_bind_map *map = &pipeline->shaders[stage]->bind_map; |
| if (map->sampler_count == 0) { |
| *state = (struct anv_state) { 0, }; |
| return VK_SUCCESS; |
| } |
| |
| uint32_t size = map->sampler_count * 16; |
| *state = anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, size, 32); |
| |
| if (state->map == NULL) |
| return VK_ERROR_OUT_OF_DEVICE_MEMORY; |
| |
| for (uint32_t s = 0; s < map->sampler_count; s++) { |
| struct anv_pipeline_binding *binding = &map->sampler_to_descriptor[s]; |
| const struct anv_descriptor *desc = |
| anv_descriptor_for_binding(pipe_state, binding); |
| |
| if (desc->type != VK_DESCRIPTOR_TYPE_SAMPLER && |
| desc->type != VK_DESCRIPTOR_TYPE_COMBINED_IMAGE_SAMPLER) |
| continue; |
| |
| struct anv_sampler *sampler = desc->sampler; |
| |
| /* This can happen if we have an unfilled slot since TYPE_SAMPLER |
| * happens to be zero. |
| */ |
| if (sampler == NULL) |
| continue; |
| |
| memcpy(state->map + (s * 16), |
| sampler->state[binding->plane], sizeof(sampler->state[0])); |
| } |
| |
| return VK_SUCCESS; |
| } |
| |
| static uint32_t |
| flush_descriptor_sets(struct anv_cmd_buffer *cmd_buffer) |
| { |
| struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline; |
| |
| VkShaderStageFlags dirty = cmd_buffer->state.descriptors_dirty & |
| pipeline->active_stages; |
| |
| VkResult result = VK_SUCCESS; |
| anv_foreach_stage(s, dirty) { |
| result = emit_samplers(cmd_buffer, s, &cmd_buffer->state.samplers[s]); |
| if (result != VK_SUCCESS) |
| break; |
| result = emit_binding_table(cmd_buffer, s, |
| &cmd_buffer->state.binding_tables[s]); |
| if (result != VK_SUCCESS) |
| break; |
| } |
| |
| if (result != VK_SUCCESS) { |
| assert(result == VK_ERROR_OUT_OF_DEVICE_MEMORY); |
| |
| result = anv_cmd_buffer_new_binding_table_block(cmd_buffer); |
| if (result != VK_SUCCESS) |
| return 0; |
| |
| /* Re-emit state base addresses so we get the new surface state base |
| * address before we start emitting binding tables etc. |
| */ |
| genX(cmd_buffer_emit_state_base_address)(cmd_buffer); |
| |
| /* Re-emit all active binding tables */ |
| dirty |= pipeline->active_stages; |
| anv_foreach_stage(s, dirty) { |
| result = emit_samplers(cmd_buffer, s, &cmd_buffer->state.samplers[s]); |
| if (result != VK_SUCCESS) { |
| anv_batch_set_error(&cmd_buffer->batch, result); |
| return 0; |
| } |
| result = emit_binding_table(cmd_buffer, s, |
| &cmd_buffer->state.binding_tables[s]); |
| if (result != VK_SUCCESS) { |
| anv_batch_set_error(&cmd_buffer->batch, result); |
| return 0; |
| } |
| } |
| } |
| |
| cmd_buffer->state.descriptors_dirty &= ~dirty; |
| |
| return dirty; |
| } |
| |
| static void |
| cmd_buffer_emit_descriptor_pointers(struct anv_cmd_buffer *cmd_buffer, |
| uint32_t stages) |
| { |
| static const uint32_t sampler_state_opcodes[] = { |
| [MESA_SHADER_VERTEX] = 43, |
| [MESA_SHADER_TESS_CTRL] = 44, /* HS */ |
| [MESA_SHADER_TESS_EVAL] = 45, /* DS */ |
| [MESA_SHADER_GEOMETRY] = 46, |
| [MESA_SHADER_FRAGMENT] = 47, |
| [MESA_SHADER_COMPUTE] = 0, |
| }; |
| |
| static const uint32_t binding_table_opcodes[] = { |
| [MESA_SHADER_VERTEX] = 38, |
| [MESA_SHADER_TESS_CTRL] = 39, |
| [MESA_SHADER_TESS_EVAL] = 40, |
| [MESA_SHADER_GEOMETRY] = 41, |
| [MESA_SHADER_FRAGMENT] = 42, |
| [MESA_SHADER_COMPUTE] = 0, |
| }; |
| |
| anv_foreach_stage(s, stages) { |
| assert(s < ARRAY_SIZE(binding_table_opcodes)); |
| assert(binding_table_opcodes[s] > 0); |
| |
| if (cmd_buffer->state.samplers[s].alloc_size > 0) { |
| anv_batch_emit(&cmd_buffer->batch, |
| GENX(3DSTATE_SAMPLER_STATE_POINTERS_VS), ssp) { |
| ssp._3DCommandSubOpcode = sampler_state_opcodes[s]; |
| ssp.PointertoVSSamplerState = cmd_buffer->state.samplers[s].offset; |
| } |
| } |
| |
| /* Always emit binding table pointers if we're asked to, since on SKL |
| * this is what flushes push constants. */ |
| anv_batch_emit(&cmd_buffer->batch, |
| GENX(3DSTATE_BINDING_TABLE_POINTERS_VS), btp) { |
| btp._3DCommandSubOpcode = binding_table_opcodes[s]; |
| btp.PointertoVSBindingTable = cmd_buffer->state.binding_tables[s].offset; |
| } |
| } |
| } |
| |
| static void |
| cmd_buffer_flush_push_constants(struct anv_cmd_buffer *cmd_buffer, |
| VkShaderStageFlags dirty_stages) |
| { |
| const struct anv_cmd_graphics_state *gfx_state = &cmd_buffer->state.gfx; |
| const struct anv_pipeline *pipeline = gfx_state->base.pipeline; |
| |
| static const uint32_t push_constant_opcodes[] = { |
| [MESA_SHADER_VERTEX] = 21, |
| [MESA_SHADER_TESS_CTRL] = 25, /* HS */ |
| [MESA_SHADER_TESS_EVAL] = 26, /* DS */ |
| [MESA_SHADER_GEOMETRY] = 22, |
| [MESA_SHADER_FRAGMENT] = 23, |
| [MESA_SHADER_COMPUTE] = 0, |
| }; |
| |
| VkShaderStageFlags flushed = 0; |
| |
| anv_foreach_stage(stage, dirty_stages) { |
| assert(stage < ARRAY_SIZE(push_constant_opcodes)); |
| assert(push_constant_opcodes[stage] > 0); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DSTATE_CONSTANT_VS), c) { |
| c._3DCommandSubOpcode = push_constant_opcodes[stage]; |
| |
| if (anv_pipeline_has_stage(pipeline, stage)) { |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| const struct brw_stage_prog_data *prog_data = |
| pipeline->shaders[stage]->prog_data; |
| const struct anv_pipeline_bind_map *bind_map = |
| &pipeline->shaders[stage]->bind_map; |
| |
| /* The Skylake PRM contains the following restriction: |
| * |
| * "The driver must ensure The following case does not occur |
| * without a flush to the 3D engine: 3DSTATE_CONSTANT_* with |
| * buffer 3 read length equal to zero committed followed by a |
| * 3DSTATE_CONSTANT_* with buffer 0 read length not equal to |
| * zero committed." |
| * |
| * To avoid this, we program the buffers in the highest slots. |
| * This way, slot 0 is only used if slot 3 is also used. |
| */ |
| int n = 3; |
| |
| for (int i = 3; i >= 0; i--) { |
| const struct brw_ubo_range *range = &prog_data->ubo_ranges[i]; |
| if (range->length == 0) |
| continue; |
| |
| const unsigned surface = |
| prog_data->binding_table.ubo_start + range->block; |
| |
| assert(surface <= bind_map->surface_count); |
| const struct anv_pipeline_binding *binding = |
| &bind_map->surface_to_descriptor[surface]; |
| |
| struct anv_address read_addr; |
| uint32_t read_len; |
| if (binding->set == ANV_DESCRIPTOR_SET_SHADER_CONSTANTS) { |
| struct anv_address constant_data = { |
| .bo = pipeline->device->dynamic_state_pool.block_pool.bo, |
| .offset = pipeline->shaders[stage]->constant_data.offset, |
| }; |
| unsigned constant_data_size = |
| pipeline->shaders[stage]->constant_data_size; |
| |
| read_len = MIN2(range->length, |
| DIV_ROUND_UP(constant_data_size, 32) - range->start); |
| read_addr = anv_address_add(constant_data, |
| range->start * 32); |
| } else if (binding->set == ANV_DESCRIPTOR_SET_DESCRIPTORS) { |
| /* This is a descriptor set buffer so the set index is |
| * actually given by binding->binding. (Yes, that's |
| * confusing.) |
| */ |
| struct anv_descriptor_set *set = |
| gfx_state->base.descriptors[binding->binding]; |
| struct anv_address desc_buffer_addr = |
| anv_descriptor_set_address(cmd_buffer, set); |
| const unsigned desc_buffer_size = set->desc_mem.alloc_size; |
| |
| read_len = MIN2(range->length, |
| DIV_ROUND_UP(desc_buffer_size, 32) - range->start); |
| read_addr = anv_address_add(desc_buffer_addr, |
| range->start * 32); |
| } else { |
| const struct anv_descriptor *desc = |
| anv_descriptor_for_binding(&gfx_state->base, binding); |
| |
| if (desc->type == VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER) { |
| read_len = MIN2(range->length, |
| DIV_ROUND_UP(desc->buffer_view->range, 32) - range->start); |
| read_addr = anv_address_add(desc->buffer_view->address, |
| range->start * 32); |
| } else { |
| assert(desc->type == VK_DESCRIPTOR_TYPE_UNIFORM_BUFFER_DYNAMIC); |
| |
| uint32_t dynamic_offset = |
| dynamic_offset_for_binding(&gfx_state->base, binding); |
| uint32_t buf_offset = |
| MIN2(desc->offset + dynamic_offset, desc->buffer->size); |
| uint32_t buf_range = |
| MIN2(desc->range, desc->buffer->size - buf_offset); |
| |
| read_len = MIN2(range->length, |
| DIV_ROUND_UP(buf_range, 32) - range->start); |
| read_addr = anv_address_add(desc->buffer->address, |
| buf_offset + range->start * 32); |
| } |
| } |
| |
| if (read_len > 0) { |
| c.ConstantBody.Buffer[n] = read_addr; |
| c.ConstantBody.ReadLength[n] = read_len; |
| n--; |
| } |
| } |
| |
| struct anv_state state = |
| anv_cmd_buffer_push_constants(cmd_buffer, stage); |
| |
| if (state.alloc_size > 0) { |
| c.ConstantBody.Buffer[n] = (struct anv_address) { |
| .bo = cmd_buffer->device->dynamic_state_pool.block_pool.bo, |
| .offset = state.offset, |
| }; |
| c.ConstantBody.ReadLength[n] = |
| DIV_ROUND_UP(state.alloc_size, 32); |
| } |
| #else |
| /* For Ivy Bridge, the push constants packets have a different |
| * rule that would require us to iterate in the other direction |
| * and possibly mess around with dynamic state base address. |
| * Don't bother; just emit regular push constants at n = 0. |
| */ |
| struct anv_state state = |
| anv_cmd_buffer_push_constants(cmd_buffer, stage); |
| |
| if (state.alloc_size > 0) { |
| c.ConstantBody.Buffer[0].offset = state.offset, |
| c.ConstantBody.ReadLength[0] = |
| DIV_ROUND_UP(state.alloc_size, 32); |
| } |
| #endif |
| } |
| } |
| |
| flushed |= mesa_to_vk_shader_stage(stage); |
| } |
| |
| cmd_buffer->state.push_constants_dirty &= ~flushed; |
| } |
| |
| void |
| genX(cmd_buffer_flush_state)(struct anv_cmd_buffer *cmd_buffer) |
| { |
| struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline; |
| uint32_t *p; |
| |
| uint32_t vb_emit = cmd_buffer->state.gfx.vb_dirty & pipeline->vb_used; |
| if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_PIPELINE) |
| vb_emit |= pipeline->vb_used; |
| |
| assert((pipeline->active_stages & VK_SHADER_STAGE_COMPUTE_BIT) == 0); |
| |
| genX(cmd_buffer_config_l3)(cmd_buffer, pipeline->urb.l3_config); |
| |
| genX(cmd_buffer_emit_hashing_mode)(cmd_buffer, UINT_MAX, UINT_MAX, 1); |
| |
| genX(flush_pipeline_select_3d)(cmd_buffer); |
| |
| if (vb_emit) { |
| const uint32_t num_buffers = __builtin_popcount(vb_emit); |
| const uint32_t num_dwords = 1 + num_buffers * 4; |
| |
| p = anv_batch_emitn(&cmd_buffer->batch, num_dwords, |
| GENX(3DSTATE_VERTEX_BUFFERS)); |
| uint32_t vb, i = 0; |
| for_each_bit(vb, vb_emit) { |
| struct anv_buffer *buffer = cmd_buffer->state.vertex_bindings[vb].buffer; |
| uint32_t offset = cmd_buffer->state.vertex_bindings[vb].offset; |
| |
| struct GENX(VERTEX_BUFFER_STATE) state = { |
| .VertexBufferIndex = vb, |
| |
| .MOCS = anv_mocs_for_bo(cmd_buffer->device, buffer->address.bo), |
| #if GEN_GEN <= 7 |
| .BufferAccessType = pipeline->vb[vb].instanced ? INSTANCEDATA : VERTEXDATA, |
| .InstanceDataStepRate = pipeline->vb[vb].instance_divisor, |
| #endif |
| |
| .AddressModifyEnable = true, |
| .BufferPitch = pipeline->vb[vb].stride, |
| .BufferStartingAddress = anv_address_add(buffer->address, offset), |
| |
| #if GEN_GEN >= 8 |
| .BufferSize = buffer->size - offset |
| #else |
| .EndAddress = anv_address_add(buffer->address, buffer->size - 1), |
| #endif |
| }; |
| |
| GENX(VERTEX_BUFFER_STATE_pack)(&cmd_buffer->batch, &p[1 + i * 4], &state); |
| i++; |
| } |
| } |
| |
| cmd_buffer->state.gfx.vb_dirty &= ~vb_emit; |
| |
| #if GEN_GEN >= 8 |
| if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_XFB_ENABLE) { |
| /* We don't need any per-buffer dirty tracking because you're not |
| * allowed to bind different XFB buffers while XFB is enabled. |
| */ |
| for (unsigned idx = 0; idx < MAX_XFB_BUFFERS; idx++) { |
| struct anv_xfb_binding *xfb = &cmd_buffer->state.xfb_bindings[idx]; |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DSTATE_SO_BUFFER), sob) { |
| sob.SOBufferIndex = idx; |
| |
| if (cmd_buffer->state.xfb_enabled && xfb->buffer && xfb->size != 0) { |
| sob.SOBufferEnable = true; |
| sob.MOCS = cmd_buffer->device->default_mocs, |
| sob.StreamOffsetWriteEnable = false; |
| sob.SurfaceBaseAddress = anv_address_add(xfb->buffer->address, |
| xfb->offset); |
| /* Size is in DWords - 1 */ |
| sob.SurfaceSize = xfb->size / 4 - 1; |
| } |
| } |
| } |
| |
| /* CNL and later require a CS stall after 3DSTATE_SO_BUFFER */ |
| if (GEN_GEN >= 10) |
| cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_CS_STALL_BIT; |
| } |
| #endif |
| |
| if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_PIPELINE) { |
| anv_batch_emit_batch(&cmd_buffer->batch, &pipeline->batch); |
| |
| /* The exact descriptor layout is pulled from the pipeline, so we need |
| * to re-emit binding tables on every pipeline change. |
| */ |
| cmd_buffer->state.descriptors_dirty |= pipeline->active_stages; |
| |
| /* If the pipeline changed, we may need to re-allocate push constant |
| * space in the URB. |
| */ |
| cmd_buffer_alloc_push_constants(cmd_buffer); |
| } |
| |
| #if GEN_GEN <= 7 |
| if (cmd_buffer->state.descriptors_dirty & VK_SHADER_STAGE_VERTEX_BIT || |
| cmd_buffer->state.push_constants_dirty & VK_SHADER_STAGE_VERTEX_BIT) { |
| /* From the IVB PRM Vol. 2, Part 1, Section 3.2.1: |
| * |
| * "A PIPE_CONTROL with Post-Sync Operation set to 1h and a depth |
| * stall needs to be sent just prior to any 3DSTATE_VS, |
| * 3DSTATE_URB_VS, 3DSTATE_CONSTANT_VS, |
| * 3DSTATE_BINDING_TABLE_POINTER_VS, |
| * 3DSTATE_SAMPLER_STATE_POINTER_VS command. Only one |
| * PIPE_CONTROL needs to be sent before any combination of VS |
| * associated 3DSTATE." |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.DepthStallEnable = true; |
| pc.PostSyncOperation = WriteImmediateData; |
| pc.Address = |
| (struct anv_address) { &cmd_buffer->device->workaround_bo, 0 }; |
| } |
| } |
| #endif |
| |
| /* Render targets live in the same binding table as fragment descriptors */ |
| if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_RENDER_TARGETS) |
| cmd_buffer->state.descriptors_dirty |= VK_SHADER_STAGE_FRAGMENT_BIT; |
| |
| /* We emit the binding tables and sampler tables first, then emit push |
| * constants and then finally emit binding table and sampler table |
| * pointers. It has to happen in this order, since emitting the binding |
| * tables may change the push constants (in case of storage images). After |
| * emitting push constants, on SKL+ we have to emit the corresponding |
| * 3DSTATE_BINDING_TABLE_POINTER_* for the push constants to take effect. |
| */ |
| uint32_t dirty = 0; |
| if (cmd_buffer->state.descriptors_dirty) |
| dirty = flush_descriptor_sets(cmd_buffer); |
| |
| if (dirty || cmd_buffer->state.push_constants_dirty) { |
| /* Because we're pushing UBOs, we have to push whenever either |
| * descriptors or push constants is dirty. |
| */ |
| dirty |= cmd_buffer->state.push_constants_dirty; |
| dirty &= ANV_STAGE_MASK & VK_SHADER_STAGE_ALL_GRAPHICS; |
| cmd_buffer_flush_push_constants(cmd_buffer, dirty); |
| } |
| |
| if (dirty) |
| cmd_buffer_emit_descriptor_pointers(cmd_buffer, dirty); |
| |
| if (cmd_buffer->state.gfx.dirty & ANV_CMD_DIRTY_DYNAMIC_VIEWPORT) |
| gen8_cmd_buffer_emit_viewport(cmd_buffer); |
| |
| if (cmd_buffer->state.gfx.dirty & (ANV_CMD_DIRTY_DYNAMIC_VIEWPORT | |
| ANV_CMD_DIRTY_PIPELINE)) { |
| gen8_cmd_buffer_emit_depth_viewport(cmd_buffer, |
| pipeline->depth_clamp_enable); |
| } |
| |
| if (cmd_buffer->state.gfx.dirty & (ANV_CMD_DIRTY_DYNAMIC_SCISSOR | |
| ANV_CMD_DIRTY_RENDER_TARGETS)) |
| gen7_cmd_buffer_emit_scissor(cmd_buffer); |
| |
| genX(cmd_buffer_flush_dynamic_state)(cmd_buffer); |
| |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| } |
| |
| static void |
| emit_vertex_bo(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_address addr, |
| uint32_t size, uint32_t index) |
| { |
| uint32_t *p = anv_batch_emitn(&cmd_buffer->batch, 5, |
| GENX(3DSTATE_VERTEX_BUFFERS)); |
| |
| GENX(VERTEX_BUFFER_STATE_pack)(&cmd_buffer->batch, p + 1, |
| &(struct GENX(VERTEX_BUFFER_STATE)) { |
| .VertexBufferIndex = index, |
| .AddressModifyEnable = true, |
| .BufferPitch = 0, |
| .MOCS = anv_mocs_for_bo(cmd_buffer->device, addr.bo), |
| #if (GEN_GEN >= 8) |
| .BufferStartingAddress = addr, |
| .BufferSize = size |
| #else |
| .BufferStartingAddress = addr, |
| .EndAddress = anv_address_add(addr, size), |
| #endif |
| }); |
| } |
| |
| static void |
| emit_base_vertex_instance_bo(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_address addr) |
| { |
| emit_vertex_bo(cmd_buffer, addr, 8, ANV_SVGS_VB_INDEX); |
| } |
| |
| static void |
| emit_base_vertex_instance(struct anv_cmd_buffer *cmd_buffer, |
| uint32_t base_vertex, uint32_t base_instance) |
| { |
| struct anv_state id_state = |
| anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 8, 4); |
| |
| ((uint32_t *)id_state.map)[0] = base_vertex; |
| ((uint32_t *)id_state.map)[1] = base_instance; |
| |
| struct anv_address addr = { |
| .bo = cmd_buffer->device->dynamic_state_pool.block_pool.bo, |
| .offset = id_state.offset, |
| }; |
| |
| emit_base_vertex_instance_bo(cmd_buffer, addr); |
| } |
| |
| static void |
| emit_draw_index(struct anv_cmd_buffer *cmd_buffer, uint32_t draw_index) |
| { |
| struct anv_state state = |
| anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 4, 4); |
| |
| ((uint32_t *)state.map)[0] = draw_index; |
| |
| struct anv_address addr = { |
| .bo = cmd_buffer->device->dynamic_state_pool.block_pool.bo, |
| .offset = state.offset, |
| }; |
| |
| emit_vertex_bo(cmd_buffer, addr, 4, ANV_DRAWID_VB_INDEX); |
| } |
| |
| void genX(CmdDraw)( |
| VkCommandBuffer commandBuffer, |
| uint32_t vertexCount, |
| uint32_t instanceCount, |
| uint32_t firstVertex, |
| uint32_t firstInstance) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline; |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| genX(cmd_buffer_flush_state)(cmd_buffer); |
| |
| if (cmd_buffer->state.conditional_render_enabled) |
| genX(cmd_emit_conditional_render_predicate)(cmd_buffer); |
| |
| if (vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance) |
| emit_base_vertex_instance(cmd_buffer, firstVertex, firstInstance); |
| if (vs_prog_data->uses_drawid) |
| emit_draw_index(cmd_buffer, 0); |
| |
| /* Our implementation of VK_KHR_multiview uses instancing to draw the |
| * different views. We need to multiply instanceCount by the view count. |
| */ |
| instanceCount *= anv_subpass_view_count(cmd_buffer->state.subpass); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) { |
| prim.PredicateEnable = cmd_buffer->state.conditional_render_enabled; |
| prim.VertexAccessType = SEQUENTIAL; |
| prim.PrimitiveTopologyType = pipeline->topology; |
| prim.VertexCountPerInstance = vertexCount; |
| prim.StartVertexLocation = firstVertex; |
| prim.InstanceCount = instanceCount; |
| prim.StartInstanceLocation = firstInstance; |
| prim.BaseVertexLocation = 0; |
| } |
| } |
| |
| void genX(CmdDrawIndexed)( |
| VkCommandBuffer commandBuffer, |
| uint32_t indexCount, |
| uint32_t instanceCount, |
| uint32_t firstIndex, |
| int32_t vertexOffset, |
| uint32_t firstInstance) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline; |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| genX(cmd_buffer_flush_state)(cmd_buffer); |
| |
| if (cmd_buffer->state.conditional_render_enabled) |
| genX(cmd_emit_conditional_render_predicate)(cmd_buffer); |
| |
| if (vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance) |
| emit_base_vertex_instance(cmd_buffer, vertexOffset, firstInstance); |
| if (vs_prog_data->uses_drawid) |
| emit_draw_index(cmd_buffer, 0); |
| |
| /* Our implementation of VK_KHR_multiview uses instancing to draw the |
| * different views. We need to multiply instanceCount by the view count. |
| */ |
| instanceCount *= anv_subpass_view_count(cmd_buffer->state.subpass); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) { |
| prim.PredicateEnable = cmd_buffer->state.conditional_render_enabled; |
| prim.VertexAccessType = RANDOM; |
| prim.PrimitiveTopologyType = pipeline->topology; |
| prim.VertexCountPerInstance = indexCount; |
| prim.StartVertexLocation = firstIndex; |
| prim.InstanceCount = instanceCount; |
| prim.StartInstanceLocation = firstInstance; |
| prim.BaseVertexLocation = vertexOffset; |
| } |
| } |
| |
| /* Auto-Draw / Indirect Registers */ |
| #define GEN7_3DPRIM_END_OFFSET 0x2420 |
| #define GEN7_3DPRIM_START_VERTEX 0x2430 |
| #define GEN7_3DPRIM_VERTEX_COUNT 0x2434 |
| #define GEN7_3DPRIM_INSTANCE_COUNT 0x2438 |
| #define GEN7_3DPRIM_START_INSTANCE 0x243C |
| #define GEN7_3DPRIM_BASE_VERTEX 0x2440 |
| |
| void genX(CmdDrawIndirectByteCountEXT)( |
| VkCommandBuffer commandBuffer, |
| uint32_t instanceCount, |
| uint32_t firstInstance, |
| VkBuffer counterBuffer, |
| VkDeviceSize counterBufferOffset, |
| uint32_t counterOffset, |
| uint32_t vertexStride) |
| { |
| #if GEN_IS_HASWELL || GEN_GEN >= 8 |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_buffer, counter_buffer, counterBuffer); |
| struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline; |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| |
| /* firstVertex is always zero for this draw function */ |
| const uint32_t firstVertex = 0; |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| genX(cmd_buffer_flush_state)(cmd_buffer); |
| |
| if (vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance) |
| emit_base_vertex_instance(cmd_buffer, firstVertex, firstInstance); |
| if (vs_prog_data->uses_drawid) |
| emit_draw_index(cmd_buffer, 0); |
| |
| /* Our implementation of VK_KHR_multiview uses instancing to draw the |
| * different views. We need to multiply instanceCount by the view count. |
| */ |
| instanceCount *= anv_subpass_view_count(cmd_buffer->state.subpass); |
| |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| struct gen_mi_value count = |
| gen_mi_mem32(anv_address_add(counter_buffer->address, |
| counterBufferOffset)); |
| if (counterOffset) |
| count = gen_mi_isub(&b, count, gen_mi_imm(counterOffset)); |
| count = gen_mi_udiv32_imm(&b, count, vertexStride); |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_VERTEX_COUNT), count); |
| |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_START_VERTEX), |
| gen_mi_imm(firstVertex)); |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_INSTANCE_COUNT), |
| gen_mi_imm(instanceCount)); |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_START_INSTANCE), |
| gen_mi_imm(firstInstance)); |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_BASE_VERTEX), gen_mi_imm(0)); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) { |
| prim.IndirectParameterEnable = true; |
| prim.VertexAccessType = SEQUENTIAL; |
| prim.PrimitiveTopologyType = pipeline->topology; |
| } |
| #endif /* GEN_IS_HASWELL || GEN_GEN >= 8 */ |
| } |
| |
| static void |
| load_indirect_parameters(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_address addr, |
| bool indexed) |
| { |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_VERTEX_COUNT), |
| gen_mi_mem32(anv_address_add(addr, 0))); |
| |
| struct gen_mi_value instance_count = gen_mi_mem32(anv_address_add(addr, 4)); |
| unsigned view_count = anv_subpass_view_count(cmd_buffer->state.subpass); |
| if (view_count > 1) { |
| #if GEN_IS_HASWELL || GEN_GEN >= 8 |
| instance_count = gen_mi_imul_imm(&b, instance_count, view_count); |
| #else |
| anv_finishme("Multiview + indirect draw requires MI_MATH; " |
| "MI_MATH is not supported on Ivy Bridge"); |
| #endif |
| } |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_INSTANCE_COUNT), instance_count); |
| |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_START_VERTEX), |
| gen_mi_mem32(anv_address_add(addr, 8))); |
| |
| if (indexed) { |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_BASE_VERTEX), |
| gen_mi_mem32(anv_address_add(addr, 12))); |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_START_INSTANCE), |
| gen_mi_mem32(anv_address_add(addr, 16))); |
| } else { |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_START_INSTANCE), |
| gen_mi_mem32(anv_address_add(addr, 12))); |
| gen_mi_store(&b, gen_mi_reg32(GEN7_3DPRIM_BASE_VERTEX), gen_mi_imm(0)); |
| } |
| } |
| |
| void genX(CmdDrawIndirect)( |
| VkCommandBuffer commandBuffer, |
| VkBuffer _buffer, |
| VkDeviceSize offset, |
| uint32_t drawCount, |
| uint32_t stride) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_buffer, buffer, _buffer); |
| struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline; |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| genX(cmd_buffer_flush_state)(cmd_buffer); |
| |
| if (cmd_buffer->state.conditional_render_enabled) |
| genX(cmd_emit_conditional_render_predicate)(cmd_buffer); |
| |
| for (uint32_t i = 0; i < drawCount; i++) { |
| struct anv_address draw = anv_address_add(buffer->address, offset); |
| |
| if (vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance) |
| emit_base_vertex_instance_bo(cmd_buffer, anv_address_add(draw, 8)); |
| if (vs_prog_data->uses_drawid) |
| emit_draw_index(cmd_buffer, i); |
| |
| load_indirect_parameters(cmd_buffer, draw, false); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) { |
| prim.IndirectParameterEnable = true; |
| prim.PredicateEnable = cmd_buffer->state.conditional_render_enabled; |
| prim.VertexAccessType = SEQUENTIAL; |
| prim.PrimitiveTopologyType = pipeline->topology; |
| } |
| |
| offset += stride; |
| } |
| } |
| |
| void genX(CmdDrawIndexedIndirect)( |
| VkCommandBuffer commandBuffer, |
| VkBuffer _buffer, |
| VkDeviceSize offset, |
| uint32_t drawCount, |
| uint32_t stride) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_buffer, buffer, _buffer); |
| struct anv_pipeline *pipeline = cmd_buffer->state.gfx.base.pipeline; |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| genX(cmd_buffer_flush_state)(cmd_buffer); |
| |
| if (cmd_buffer->state.conditional_render_enabled) |
| genX(cmd_emit_conditional_render_predicate)(cmd_buffer); |
| |
| for (uint32_t i = 0; i < drawCount; i++) { |
| struct anv_address draw = anv_address_add(buffer->address, offset); |
| |
| /* TODO: We need to stomp base vertex to 0 somehow */ |
| if (vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance) |
| emit_base_vertex_instance_bo(cmd_buffer, anv_address_add(draw, 12)); |
| if (vs_prog_data->uses_drawid) |
| emit_draw_index(cmd_buffer, i); |
| |
| load_indirect_parameters(cmd_buffer, draw, true); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) { |
| prim.IndirectParameterEnable = true; |
| prim.PredicateEnable = cmd_buffer->state.conditional_render_enabled; |
| prim.VertexAccessType = RANDOM; |
| prim.PrimitiveTopologyType = pipeline->topology; |
| } |
| |
| offset += stride; |
| } |
| } |
| |
| #define TMP_DRAW_COUNT_REG 0x2670 /* MI_ALU_REG14 */ |
| |
| static void |
| prepare_for_draw_count_predicate(struct anv_cmd_buffer *cmd_buffer, |
| struct anv_address count_address, |
| const bool conditional_render_enabled) |
| { |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| if (conditional_render_enabled) { |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| gen_mi_store(&b, gen_mi_reg64(TMP_DRAW_COUNT_REG), |
| gen_mi_mem32(count_address)); |
| #endif |
| } else { |
| /* Upload the current draw count from the draw parameters buffer to |
| * MI_PREDICATE_SRC0. |
| */ |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC0), |
| gen_mi_mem32(count_address)); |
| |
| gen_mi_store(&b, gen_mi_reg32(MI_PREDICATE_SRC1 + 4), gen_mi_imm(0)); |
| } |
| } |
| |
| static void |
| emit_draw_count_predicate(struct anv_cmd_buffer *cmd_buffer, |
| uint32_t draw_index) |
| { |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| /* Upload the index of the current primitive to MI_PREDICATE_SRC1. */ |
| gen_mi_store(&b, gen_mi_reg32(MI_PREDICATE_SRC1), gen_mi_imm(draw_index)); |
| |
| if (draw_index == 0) { |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOADINV; |
| mip.CombineOperation = COMBINE_SET; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| } else { |
| /* While draw_index < draw_count the predicate's result will be |
| * (draw_index == draw_count) ^ TRUE = TRUE |
| * When draw_index == draw_count the result is |
| * (TRUE) ^ TRUE = FALSE |
| * After this all results will be: |
| * (FALSE) ^ FALSE = FALSE |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOAD; |
| mip.CombineOperation = COMBINE_XOR; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| } |
| } |
| |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| static void |
| emit_draw_count_predicate_with_conditional_render( |
| struct anv_cmd_buffer *cmd_buffer, |
| uint32_t draw_index) |
| { |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| struct gen_mi_value pred = gen_mi_ult(&b, gen_mi_imm(draw_index), |
| gen_mi_reg64(TMP_DRAW_COUNT_REG)); |
| pred = gen_mi_iand(&b, pred, gen_mi_reg64(ANV_PREDICATE_RESULT_REG)); |
| |
| #if GEN_GEN >= 8 |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_RESULT), pred); |
| #else |
| /* MI_PREDICATE_RESULT is not whitelisted in i915 command parser |
| * so we emit MI_PREDICATE to set it. |
| */ |
| |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC0), pred); |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC1), gen_mi_imm(0)); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOADINV; |
| mip.CombineOperation = COMBINE_SET; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| #endif |
| } |
| #endif |
| |
| void genX(CmdDrawIndirectCountKHR)( |
| VkCommandBuffer commandBuffer, |
| VkBuffer _buffer, |
| VkDeviceSize offset, |
| VkBuffer _countBuffer, |
| VkDeviceSize countBufferOffset, |
| uint32_t maxDrawCount, |
| uint32_t stride) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_buffer, buffer, _buffer); |
| ANV_FROM_HANDLE(anv_buffer, count_buffer, _countBuffer); |
| struct anv_cmd_state *cmd_state = &cmd_buffer->state; |
| struct anv_pipeline *pipeline = cmd_state->gfx.base.pipeline; |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| genX(cmd_buffer_flush_state)(cmd_buffer); |
| |
| struct anv_address count_address = |
| anv_address_add(count_buffer->address, countBufferOffset); |
| |
| prepare_for_draw_count_predicate(cmd_buffer, count_address, |
| cmd_state->conditional_render_enabled); |
| |
| for (uint32_t i = 0; i < maxDrawCount; i++) { |
| struct anv_address draw = anv_address_add(buffer->address, offset); |
| |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| if (cmd_state->conditional_render_enabled) { |
| emit_draw_count_predicate_with_conditional_render(cmd_buffer, i); |
| } else { |
| emit_draw_count_predicate(cmd_buffer, i); |
| } |
| #else |
| emit_draw_count_predicate(cmd_buffer, i); |
| #endif |
| |
| if (vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance) |
| emit_base_vertex_instance_bo(cmd_buffer, anv_address_add(draw, 8)); |
| if (vs_prog_data->uses_drawid) |
| emit_draw_index(cmd_buffer, i); |
| |
| load_indirect_parameters(cmd_buffer, draw, false); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) { |
| prim.IndirectParameterEnable = true; |
| prim.PredicateEnable = true; |
| prim.VertexAccessType = SEQUENTIAL; |
| prim.PrimitiveTopologyType = pipeline->topology; |
| } |
| |
| offset += stride; |
| } |
| } |
| |
| void genX(CmdDrawIndexedIndirectCountKHR)( |
| VkCommandBuffer commandBuffer, |
| VkBuffer _buffer, |
| VkDeviceSize offset, |
| VkBuffer _countBuffer, |
| VkDeviceSize countBufferOffset, |
| uint32_t maxDrawCount, |
| uint32_t stride) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_buffer, buffer, _buffer); |
| ANV_FROM_HANDLE(anv_buffer, count_buffer, _countBuffer); |
| struct anv_cmd_state *cmd_state = &cmd_buffer->state; |
| struct anv_pipeline *pipeline = cmd_state->gfx.base.pipeline; |
| const struct brw_vs_prog_data *vs_prog_data = get_vs_prog_data(pipeline); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| genX(cmd_buffer_flush_state)(cmd_buffer); |
| |
| struct anv_address count_address = |
| anv_address_add(count_buffer->address, countBufferOffset); |
| |
| prepare_for_draw_count_predicate(cmd_buffer, count_address, |
| cmd_state->conditional_render_enabled); |
| |
| for (uint32_t i = 0; i < maxDrawCount; i++) { |
| struct anv_address draw = anv_address_add(buffer->address, offset); |
| |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| if (cmd_state->conditional_render_enabled) { |
| emit_draw_count_predicate_with_conditional_render(cmd_buffer, i); |
| } else { |
| emit_draw_count_predicate(cmd_buffer, i); |
| } |
| #else |
| emit_draw_count_predicate(cmd_buffer, i); |
| #endif |
| |
| /* TODO: We need to stomp base vertex to 0 somehow */ |
| if (vs_prog_data->uses_firstvertex || |
| vs_prog_data->uses_baseinstance) |
| emit_base_vertex_instance_bo(cmd_buffer, anv_address_add(draw, 12)); |
| if (vs_prog_data->uses_drawid) |
| emit_draw_index(cmd_buffer, i); |
| |
| load_indirect_parameters(cmd_buffer, draw, true); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DPRIMITIVE), prim) { |
| prim.IndirectParameterEnable = true; |
| prim.PredicateEnable = true; |
| prim.VertexAccessType = RANDOM; |
| prim.PrimitiveTopologyType = pipeline->topology; |
| } |
| |
| offset += stride; |
| } |
| } |
| |
| void genX(CmdBeginTransformFeedbackEXT)( |
| VkCommandBuffer commandBuffer, |
| uint32_t firstCounterBuffer, |
| uint32_t counterBufferCount, |
| const VkBuffer* pCounterBuffers, |
| const VkDeviceSize* pCounterBufferOffsets) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| |
| assert(firstCounterBuffer < MAX_XFB_BUFFERS); |
| assert(counterBufferCount <= MAX_XFB_BUFFERS); |
| assert(firstCounterBuffer + counterBufferCount <= MAX_XFB_BUFFERS); |
| |
| /* From the SKL PRM Vol. 2c, SO_WRITE_OFFSET: |
| * |
| * "Ssoftware must ensure that no HW stream output operations can be in |
| * process or otherwise pending at the point that the MI_LOAD/STORE |
| * commands are processed. This will likely require a pipeline flush." |
| */ |
| cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_CS_STALL_BIT; |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| |
| for (uint32_t idx = 0; idx < MAX_XFB_BUFFERS; idx++) { |
| /* If we have a counter buffer, this is a resume so we need to load the |
| * value into the streamout offset register. Otherwise, this is a begin |
| * and we need to reset it to zero. |
| */ |
| if (pCounterBuffers && |
| idx >= firstCounterBuffer && |
| idx - firstCounterBuffer < counterBufferCount && |
| pCounterBuffers[idx - firstCounterBuffer] != VK_NULL_HANDLE) { |
| uint32_t cb_idx = idx - firstCounterBuffer; |
| ANV_FROM_HANDLE(anv_buffer, counter_buffer, pCounterBuffers[cb_idx]); |
| uint64_t offset = pCounterBufferOffsets ? |
| pCounterBufferOffsets[cb_idx] : 0; |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_LOAD_REGISTER_MEM), lrm) { |
| lrm.RegisterAddress = GENX(SO_WRITE_OFFSET0_num) + idx * 4; |
| lrm.MemoryAddress = anv_address_add(counter_buffer->address, |
| offset); |
| } |
| } else { |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_LOAD_REGISTER_IMM), lri) { |
| lri.RegisterOffset = GENX(SO_WRITE_OFFSET0_num) + idx * 4; |
| lri.DataDWord = 0; |
| } |
| } |
| } |
| |
| cmd_buffer->state.xfb_enabled = true; |
| cmd_buffer->state.gfx.dirty |= ANV_CMD_DIRTY_XFB_ENABLE; |
| } |
| |
| void genX(CmdEndTransformFeedbackEXT)( |
| VkCommandBuffer commandBuffer, |
| uint32_t firstCounterBuffer, |
| uint32_t counterBufferCount, |
| const VkBuffer* pCounterBuffers, |
| const VkDeviceSize* pCounterBufferOffsets) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| |
| assert(firstCounterBuffer < MAX_XFB_BUFFERS); |
| assert(counterBufferCount <= MAX_XFB_BUFFERS); |
| assert(firstCounterBuffer + counterBufferCount <= MAX_XFB_BUFFERS); |
| |
| /* From the SKL PRM Vol. 2c, SO_WRITE_OFFSET: |
| * |
| * "Ssoftware must ensure that no HW stream output operations can be in |
| * process or otherwise pending at the point that the MI_LOAD/STORE |
| * commands are processed. This will likely require a pipeline flush." |
| */ |
| cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_CS_STALL_BIT; |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| |
| for (uint32_t cb_idx = 0; cb_idx < counterBufferCount; cb_idx++) { |
| unsigned idx = firstCounterBuffer + cb_idx; |
| |
| /* If we have a counter buffer, this is a resume so we need to load the |
| * value into the streamout offset register. Otherwise, this is a begin |
| * and we need to reset it to zero. |
| */ |
| if (pCounterBuffers && |
| cb_idx < counterBufferCount && |
| pCounterBuffers[cb_idx] != VK_NULL_HANDLE) { |
| ANV_FROM_HANDLE(anv_buffer, counter_buffer, pCounterBuffers[cb_idx]); |
| uint64_t offset = pCounterBufferOffsets ? |
| pCounterBufferOffsets[cb_idx] : 0; |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_STORE_REGISTER_MEM), srm) { |
| srm.MemoryAddress = anv_address_add(counter_buffer->address, |
| offset); |
| srm.RegisterAddress = GENX(SO_WRITE_OFFSET0_num) + idx * 4; |
| } |
| } |
| } |
| |
| cmd_buffer->state.xfb_enabled = false; |
| cmd_buffer->state.gfx.dirty |= ANV_CMD_DIRTY_XFB_ENABLE; |
| } |
| |
| static VkResult |
| flush_compute_descriptor_set(struct anv_cmd_buffer *cmd_buffer) |
| { |
| struct anv_pipeline *pipeline = cmd_buffer->state.compute.base.pipeline; |
| struct anv_state surfaces = { 0, }, samplers = { 0, }; |
| VkResult result; |
| |
| result = emit_binding_table(cmd_buffer, MESA_SHADER_COMPUTE, &surfaces); |
| if (result != VK_SUCCESS) { |
| assert(result == VK_ERROR_OUT_OF_DEVICE_MEMORY); |
| |
| result = anv_cmd_buffer_new_binding_table_block(cmd_buffer); |
| if (result != VK_SUCCESS) |
| return result; |
| |
| /* Re-emit state base addresses so we get the new surface state base |
| * address before we start emitting binding tables etc. |
| */ |
| genX(cmd_buffer_emit_state_base_address)(cmd_buffer); |
| |
| result = emit_binding_table(cmd_buffer, MESA_SHADER_COMPUTE, &surfaces); |
| if (result != VK_SUCCESS) { |
| anv_batch_set_error(&cmd_buffer->batch, result); |
| return result; |
| } |
| } |
| |
| result = emit_samplers(cmd_buffer, MESA_SHADER_COMPUTE, &samplers); |
| if (result != VK_SUCCESS) { |
| anv_batch_set_error(&cmd_buffer->batch, result); |
| return result; |
| } |
| |
| uint32_t iface_desc_data_dw[GENX(INTERFACE_DESCRIPTOR_DATA_length)]; |
| struct GENX(INTERFACE_DESCRIPTOR_DATA) desc = { |
| .BindingTablePointer = surfaces.offset, |
| .SamplerStatePointer = samplers.offset, |
| }; |
| GENX(INTERFACE_DESCRIPTOR_DATA_pack)(NULL, iface_desc_data_dw, &desc); |
| |
| struct anv_state state = |
| anv_cmd_buffer_merge_dynamic(cmd_buffer, iface_desc_data_dw, |
| pipeline->interface_descriptor_data, |
| GENX(INTERFACE_DESCRIPTOR_DATA_length), |
| 64); |
| |
| uint32_t size = GENX(INTERFACE_DESCRIPTOR_DATA_length) * sizeof(uint32_t); |
| anv_batch_emit(&cmd_buffer->batch, |
| GENX(MEDIA_INTERFACE_DESCRIPTOR_LOAD), mid) { |
| mid.InterfaceDescriptorTotalLength = size; |
| mid.InterfaceDescriptorDataStartAddress = state.offset; |
| } |
| |
| return VK_SUCCESS; |
| } |
| |
| void |
| genX(cmd_buffer_flush_compute_state)(struct anv_cmd_buffer *cmd_buffer) |
| { |
| struct anv_pipeline *pipeline = cmd_buffer->state.compute.base.pipeline; |
| VkResult result; |
| |
| assert(pipeline->active_stages == VK_SHADER_STAGE_COMPUTE_BIT); |
| |
| genX(cmd_buffer_config_l3)(cmd_buffer, pipeline->urb.l3_config); |
| |
| genX(flush_pipeline_select_gpgpu)(cmd_buffer); |
| |
| if (cmd_buffer->state.compute.pipeline_dirty) { |
| /* From the Sky Lake PRM Vol 2a, MEDIA_VFE_STATE: |
| * |
| * "A stalling PIPE_CONTROL is required before MEDIA_VFE_STATE unless |
| * the only bits that are changed are scoreboard related: Scoreboard |
| * Enable, Scoreboard Type, Scoreboard Mask, Scoreboard * Delta. For |
| * these scoreboard related states, a MEDIA_STATE_FLUSH is |
| * sufficient." |
| */ |
| cmd_buffer->state.pending_pipe_bits |= ANV_PIPE_CS_STALL_BIT; |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| |
| anv_batch_emit_batch(&cmd_buffer->batch, &pipeline->batch); |
| } |
| |
| if ((cmd_buffer->state.descriptors_dirty & VK_SHADER_STAGE_COMPUTE_BIT) || |
| cmd_buffer->state.compute.pipeline_dirty) { |
| /* FIXME: figure out descriptors for gen7 */ |
| result = flush_compute_descriptor_set(cmd_buffer); |
| if (result != VK_SUCCESS) |
| return; |
| |
| cmd_buffer->state.descriptors_dirty &= ~VK_SHADER_STAGE_COMPUTE_BIT; |
| } |
| |
| if (cmd_buffer->state.push_constants_dirty & VK_SHADER_STAGE_COMPUTE_BIT) { |
| struct anv_state push_state = |
| anv_cmd_buffer_cs_push_constants(cmd_buffer); |
| |
| if (push_state.alloc_size) { |
| anv_batch_emit(&cmd_buffer->batch, GENX(MEDIA_CURBE_LOAD), curbe) { |
| curbe.CURBETotalDataLength = push_state.alloc_size; |
| curbe.CURBEDataStartAddress = push_state.offset; |
| } |
| } |
| |
| cmd_buffer->state.push_constants_dirty &= ~VK_SHADER_STAGE_COMPUTE_BIT; |
| } |
| |
| cmd_buffer->state.compute.pipeline_dirty = false; |
| |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| } |
| |
| #if GEN_GEN == 7 |
| |
| static VkResult |
| verify_cmd_parser(const struct anv_device *device, |
| int required_version, |
| const char *function) |
| { |
| if (device->instance->physicalDevice.cmd_parser_version < required_version) { |
| return vk_errorf(device->instance, device->instance, |
| VK_ERROR_FEATURE_NOT_PRESENT, |
| "cmd parser version %d is required for %s", |
| required_version, function); |
| } else { |
| return VK_SUCCESS; |
| } |
| } |
| |
| #endif |
| |
| static void |
| anv_cmd_buffer_push_base_group_id(struct anv_cmd_buffer *cmd_buffer, |
| uint32_t baseGroupX, |
| uint32_t baseGroupY, |
| uint32_t baseGroupZ) |
| { |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| struct anv_push_constants *push = |
| &cmd_buffer->state.push_constants[MESA_SHADER_COMPUTE]; |
| if (push->base_work_group_id[0] != baseGroupX || |
| push->base_work_group_id[1] != baseGroupY || |
| push->base_work_group_id[2] != baseGroupZ) { |
| push->base_work_group_id[0] = baseGroupX; |
| push->base_work_group_id[1] = baseGroupY; |
| push->base_work_group_id[2] = baseGroupZ; |
| |
| cmd_buffer->state.push_constants_dirty |= VK_SHADER_STAGE_COMPUTE_BIT; |
| } |
| } |
| |
| void genX(CmdDispatch)( |
| VkCommandBuffer commandBuffer, |
| uint32_t x, |
| uint32_t y, |
| uint32_t z) |
| { |
| genX(CmdDispatchBase)(commandBuffer, 0, 0, 0, x, y, z); |
| } |
| |
| void genX(CmdDispatchBase)( |
| VkCommandBuffer commandBuffer, |
| uint32_t baseGroupX, |
| uint32_t baseGroupY, |
| uint32_t baseGroupZ, |
| uint32_t groupCountX, |
| uint32_t groupCountY, |
| uint32_t groupCountZ) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| struct anv_pipeline *pipeline = cmd_buffer->state.compute.base.pipeline; |
| const struct brw_cs_prog_data *prog_data = get_cs_prog_data(pipeline); |
| |
| anv_cmd_buffer_push_base_group_id(cmd_buffer, baseGroupX, |
| baseGroupY, baseGroupZ); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| if (prog_data->uses_num_work_groups) { |
| struct anv_state state = |
| anv_cmd_buffer_alloc_dynamic_state(cmd_buffer, 12, 4); |
| uint32_t *sizes = state.map; |
| sizes[0] = groupCountX; |
| sizes[1] = groupCountY; |
| sizes[2] = groupCountZ; |
| cmd_buffer->state.compute.num_workgroups = (struct anv_address) { |
| .bo = cmd_buffer->device->dynamic_state_pool.block_pool.bo, |
| .offset = state.offset, |
| }; |
| } |
| |
| genX(cmd_buffer_flush_compute_state)(cmd_buffer); |
| |
| if (cmd_buffer->state.conditional_render_enabled) |
| genX(cmd_emit_conditional_render_predicate)(cmd_buffer); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(GPGPU_WALKER), ggw) { |
| ggw.PredicateEnable = cmd_buffer->state.conditional_render_enabled; |
| ggw.SIMDSize = prog_data->simd_size / 16; |
| ggw.ThreadDepthCounterMaximum = 0; |
| ggw.ThreadHeightCounterMaximum = 0; |
| ggw.ThreadWidthCounterMaximum = prog_data->threads - 1; |
| ggw.ThreadGroupIDXDimension = groupCountX; |
| ggw.ThreadGroupIDYDimension = groupCountY; |
| ggw.ThreadGroupIDZDimension = groupCountZ; |
| ggw.RightExecutionMask = pipeline->cs_right_mask; |
| ggw.BottomExecutionMask = 0xffffffff; |
| } |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(MEDIA_STATE_FLUSH), msf); |
| } |
| |
| #define GPGPU_DISPATCHDIMX 0x2500 |
| #define GPGPU_DISPATCHDIMY 0x2504 |
| #define GPGPU_DISPATCHDIMZ 0x2508 |
| |
| void genX(CmdDispatchIndirect)( |
| VkCommandBuffer commandBuffer, |
| VkBuffer _buffer, |
| VkDeviceSize offset) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_buffer, buffer, _buffer); |
| struct anv_pipeline *pipeline = cmd_buffer->state.compute.base.pipeline; |
| const struct brw_cs_prog_data *prog_data = get_cs_prog_data(pipeline); |
| struct anv_address addr = anv_address_add(buffer->address, offset); |
| struct anv_batch *batch = &cmd_buffer->batch; |
| |
| anv_cmd_buffer_push_base_group_id(cmd_buffer, 0, 0, 0); |
| |
| #if GEN_GEN == 7 |
| /* Linux 4.4 added command parser version 5 which allows the GPGPU |
| * indirect dispatch registers to be written. |
| */ |
| if (verify_cmd_parser(cmd_buffer->device, 5, |
| "vkCmdDispatchIndirect") != VK_SUCCESS) |
| return; |
| #endif |
| |
| if (prog_data->uses_num_work_groups) |
| cmd_buffer->state.compute.num_workgroups = addr; |
| |
| genX(cmd_buffer_flush_compute_state)(cmd_buffer); |
| |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| struct gen_mi_value size_x = gen_mi_mem32(anv_address_add(addr, 0)); |
| struct gen_mi_value size_y = gen_mi_mem32(anv_address_add(addr, 4)); |
| struct gen_mi_value size_z = gen_mi_mem32(anv_address_add(addr, 8)); |
| |
| gen_mi_store(&b, gen_mi_reg32(GPGPU_DISPATCHDIMX), size_x); |
| gen_mi_store(&b, gen_mi_reg32(GPGPU_DISPATCHDIMY), size_y); |
| gen_mi_store(&b, gen_mi_reg32(GPGPU_DISPATCHDIMZ), size_z); |
| |
| #if GEN_GEN <= 7 |
| /* predicate = (compute_dispatch_indirect_x_size == 0); */ |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC0), size_x); |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC1), gen_mi_imm(0)); |
| anv_batch_emit(batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOAD; |
| mip.CombineOperation = COMBINE_SET; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| |
| /* predicate |= (compute_dispatch_indirect_y_size == 0); */ |
| gen_mi_store(&b, gen_mi_reg32(MI_PREDICATE_SRC0), size_y); |
| anv_batch_emit(batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOAD; |
| mip.CombineOperation = COMBINE_OR; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| |
| /* predicate |= (compute_dispatch_indirect_z_size == 0); */ |
| gen_mi_store(&b, gen_mi_reg32(MI_PREDICATE_SRC0), size_z); |
| anv_batch_emit(batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOAD; |
| mip.CombineOperation = COMBINE_OR; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| |
| /* predicate = !predicate; */ |
| anv_batch_emit(batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOADINV; |
| mip.CombineOperation = COMBINE_OR; |
| mip.CompareOperation = COMPARE_FALSE; |
| } |
| |
| #if GEN_IS_HASWELL |
| if (cmd_buffer->state.conditional_render_enabled) { |
| /* predicate &= !(conditional_rendering_predicate == 0); */ |
| gen_mi_store(&b, gen_mi_reg32(MI_PREDICATE_SRC0), |
| gen_mi_reg32(ANV_PREDICATE_RESULT_REG)); |
| anv_batch_emit(batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOADINV; |
| mip.CombineOperation = COMBINE_AND; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| } |
| #endif |
| |
| #else /* GEN_GEN > 7 */ |
| if (cmd_buffer->state.conditional_render_enabled) |
| genX(cmd_emit_conditional_render_predicate)(cmd_buffer); |
| #endif |
| |
| anv_batch_emit(batch, GENX(GPGPU_WALKER), ggw) { |
| ggw.IndirectParameterEnable = true; |
| ggw.PredicateEnable = GEN_GEN <= 7 || |
| cmd_buffer->state.conditional_render_enabled; |
| ggw.SIMDSize = prog_data->simd_size / 16; |
| ggw.ThreadDepthCounterMaximum = 0; |
| ggw.ThreadHeightCounterMaximum = 0; |
| ggw.ThreadWidthCounterMaximum = prog_data->threads - 1; |
| ggw.RightExecutionMask = pipeline->cs_right_mask; |
| ggw.BottomExecutionMask = 0xffffffff; |
| } |
| |
| anv_batch_emit(batch, GENX(MEDIA_STATE_FLUSH), msf); |
| } |
| |
| static void |
| genX(flush_pipeline_select)(struct anv_cmd_buffer *cmd_buffer, |
| uint32_t pipeline) |
| { |
| UNUSED const struct gen_device_info *devinfo = &cmd_buffer->device->info; |
| |
| if (cmd_buffer->state.current_pipeline == pipeline) |
| return; |
| |
| #if GEN_GEN >= 8 && GEN_GEN < 10 |
| /* From the Broadwell PRM, Volume 2a: Instructions, PIPELINE_SELECT: |
| * |
| * Software must clear the COLOR_CALC_STATE Valid field in |
| * 3DSTATE_CC_STATE_POINTERS command prior to send a PIPELINE_SELECT |
| * with Pipeline Select set to GPGPU. |
| * |
| * The internal hardware docs recommend the same workaround for Gen9 |
| * hardware too. |
| */ |
| if (pipeline == GPGPU) |
| anv_batch_emit(&cmd_buffer->batch, GENX(3DSTATE_CC_STATE_POINTERS), t); |
| #endif |
| |
| #if GEN_GEN == 9 |
| if (pipeline == _3D) { |
| /* There is a mid-object preemption workaround which requires you to |
| * re-emit MEDIA_VFE_STATE after switching from GPGPU to 3D. However, |
| * even without preemption, we have issues with geometry flickering when |
| * GPGPU and 3D are back-to-back and this seems to fix it. We don't |
| * really know why. |
| */ |
| const uint32_t subslices = |
| MAX2(cmd_buffer->device->instance->physicalDevice.subslice_total, 1); |
| anv_batch_emit(&cmd_buffer->batch, GENX(MEDIA_VFE_STATE), vfe) { |
| vfe.MaximumNumberofThreads = |
| devinfo->max_cs_threads * subslices - 1; |
| vfe.NumberofURBEntries = 2; |
| vfe.URBEntryAllocationSize = 2; |
| } |
| } |
| #endif |
| |
| /* From "BXML » GT » MI » vol1a GPU Overview » [Instruction] |
| * PIPELINE_SELECT [DevBWR+]": |
| * |
| * Project: DEVSNB+ |
| * |
| * Software must ensure all the write caches are flushed through a |
| * stalling PIPE_CONTROL command followed by another PIPE_CONTROL |
| * command to invalidate read only caches prior to programming |
| * MI_PIPELINE_SELECT command to change the Pipeline Select Mode. |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.RenderTargetCacheFlushEnable = true; |
| pc.DepthCacheFlushEnable = true; |
| pc.DCFlushEnable = true; |
| pc.PostSyncOperation = NoWrite; |
| pc.CommandStreamerStallEnable = true; |
| } |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| pc.TextureCacheInvalidationEnable = true; |
| pc.ConstantCacheInvalidationEnable = true; |
| pc.StateCacheInvalidationEnable = true; |
| pc.InstructionCacheInvalidateEnable = true; |
| pc.PostSyncOperation = NoWrite; |
| } |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPELINE_SELECT), ps) { |
| #if GEN_GEN >= 9 |
| ps.MaskBits = 3; |
| #endif |
| ps.PipelineSelection = pipeline; |
| } |
| |
| #if GEN_GEN == 9 |
| if (devinfo->is_geminilake) { |
| /* Project: DevGLK |
| * |
| * "This chicken bit works around a hardware issue with barrier logic |
| * encountered when switching between GPGPU and 3D pipelines. To |
| * workaround the issue, this mode bit should be set after a pipeline |
| * is selected." |
| */ |
| uint32_t scec; |
| anv_pack_struct(&scec, GENX(SLICE_COMMON_ECO_CHICKEN1), |
| .GLKBarrierMode = |
| pipeline == GPGPU ? GLK_BARRIER_MODE_GPGPU |
| : GLK_BARRIER_MODE_3D_HULL, |
| .GLKBarrierModeMask = 1); |
| emit_lri(&cmd_buffer->batch, GENX(SLICE_COMMON_ECO_CHICKEN1_num), scec); |
| } |
| #endif |
| |
| cmd_buffer->state.current_pipeline = pipeline; |
| } |
| |
| void |
| genX(flush_pipeline_select_3d)(struct anv_cmd_buffer *cmd_buffer) |
| { |
| genX(flush_pipeline_select)(cmd_buffer, _3D); |
| } |
| |
| void |
| genX(flush_pipeline_select_gpgpu)(struct anv_cmd_buffer *cmd_buffer) |
| { |
| genX(flush_pipeline_select)(cmd_buffer, GPGPU); |
| } |
| |
| void |
| genX(cmd_buffer_emit_gen7_depth_flush)(struct anv_cmd_buffer *cmd_buffer) |
| { |
| if (GEN_GEN >= 8) |
| return; |
| |
| /* From the Haswell PRM, documentation for 3DSTATE_DEPTH_BUFFER: |
| * |
| * "Restriction: Prior to changing Depth/Stencil Buffer state (i.e., any |
| * combination of 3DSTATE_DEPTH_BUFFER, 3DSTATE_CLEAR_PARAMS, |
| * 3DSTATE_STENCIL_BUFFER, 3DSTATE_HIER_DEPTH_BUFFER) SW must first |
| * issue a pipelined depth stall (PIPE_CONTROL with Depth Stall bit |
| * set), followed by a pipelined depth cache flush (PIPE_CONTROL with |
| * Depth Flush Bit set, followed by another pipelined depth stall |
| * (PIPE_CONTROL with Depth Stall Bit set), unless SW can otherwise |
| * guarantee that the pipeline from WM onwards is already flushed (e.g., |
| * via a preceding MI_FLUSH)." |
| */ |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) { |
| pipe.DepthStallEnable = true; |
| } |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) { |
| pipe.DepthCacheFlushEnable = true; |
| } |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pipe) { |
| pipe.DepthStallEnable = true; |
| } |
| } |
| |
| /** |
| * Update the pixel hashing modes that determine the balancing of PS threads |
| * across subslices and slices. |
| * |
| * \param width Width bound of the rendering area (already scaled down if \p |
| * scale is greater than 1). |
| * \param height Height bound of the rendering area (already scaled down if \p |
| * scale is greater than 1). |
| * \param scale The number of framebuffer samples that could potentially be |
| * affected by an individual channel of the PS thread. This is |
| * typically one for single-sampled rendering, but for operations |
| * like CCS resolves and fast clears a single PS invocation may |
| * update a huge number of pixels, in which case a finer |
| * balancing is desirable in order to maximally utilize the |
| * bandwidth available. UINT_MAX can be used as shorthand for |
| * "finest hashing mode available". |
| */ |
| void |
| genX(cmd_buffer_emit_hashing_mode)(struct anv_cmd_buffer *cmd_buffer, |
| unsigned width, unsigned height, |
| unsigned scale) |
| { |
| #if GEN_GEN == 9 |
| const struct gen_device_info *devinfo = &cmd_buffer->device->info; |
| const unsigned slice_hashing[] = { |
| /* Because all Gen9 platforms with more than one slice require |
| * three-way subslice hashing, a single "normal" 16x16 slice hashing |
| * block is guaranteed to suffer from substantial imbalance, with one |
| * subslice receiving twice as much work as the other two in the |
| * slice. |
| * |
| * The performance impact of that would be particularly severe when |
| * three-way hashing is also in use for slice balancing (which is the |
| * case for all Gen9 GT4 platforms), because one of the slices |
| * receives one every three 16x16 blocks in either direction, which |
| * is roughly the periodicity of the underlying subslice imbalance |
| * pattern ("roughly" because in reality the hardware's |
| * implementation of three-way hashing doesn't do exact modulo 3 |
| * arithmetic, which somewhat decreases the magnitude of this effect |
| * in practice). This leads to a systematic subslice imbalance |
| * within that slice regardless of the size of the primitive. The |
| * 32x32 hashing mode guarantees that the subslice imbalance within a |
| * single slice hashing block is minimal, largely eliminating this |
| * effect. |
| */ |
| _32x32, |
| /* Finest slice hashing mode available. */ |
| NORMAL |
| }; |
| const unsigned subslice_hashing[] = { |
| /* 16x16 would provide a slight cache locality benefit especially |
| * visible in the sampler L1 cache efficiency of low-bandwidth |
| * non-LLC platforms, but it comes at the cost of greater subslice |
| * imbalance for primitives of dimensions approximately intermediate |
| * between 16x4 and 16x16. |
| */ |
| _16x4, |
| /* Finest subslice hashing mode available. */ |
| _8x4 |
| }; |
| /* Dimensions of the smallest hashing block of a given hashing mode. If |
| * the rendering area is smaller than this there can't possibly be any |
| * benefit from switching to this mode, so we optimize out the |
| * transition. |
| */ |
| const unsigned min_size[][2] = { |
| { 16, 4 }, |
| { 8, 4 } |
| }; |
| const unsigned idx = scale > 1; |
| |
| if (cmd_buffer->state.current_hash_scale != scale && |
| (width > min_size[idx][0] || height > min_size[idx][1])) { |
| uint32_t gt_mode; |
| |
| anv_pack_struct(>_mode, GENX(GT_MODE), |
| .SliceHashing = (devinfo->num_slices > 1 ? slice_hashing[idx] : 0), |
| .SliceHashingMask = (devinfo->num_slices > 1 ? -1 : 0), |
| .SubsliceHashing = subslice_hashing[idx], |
| .SubsliceHashingMask = -1); |
| |
| cmd_buffer->state.pending_pipe_bits |= |
| ANV_PIPE_CS_STALL_BIT | ANV_PIPE_STALL_AT_SCOREBOARD_BIT; |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| |
| emit_lri(&cmd_buffer->batch, GENX(GT_MODE_num), gt_mode); |
| |
| cmd_buffer->state.current_hash_scale = scale; |
| } |
| #endif |
| } |
| |
| static void |
| cmd_buffer_emit_depth_stencil(struct anv_cmd_buffer *cmd_buffer) |
| { |
| struct anv_device *device = cmd_buffer->device; |
| const struct anv_image_view *iview = |
| anv_cmd_buffer_get_depth_stencil_view(cmd_buffer); |
| const struct anv_image *image = iview ? iview->image : NULL; |
| |
| /* FIXME: Width and Height are wrong */ |
| |
| genX(cmd_buffer_emit_gen7_depth_flush)(cmd_buffer); |
| |
| uint32_t *dw = anv_batch_emit_dwords(&cmd_buffer->batch, |
| device->isl_dev.ds.size / 4); |
| if (dw == NULL) |
| return; |
| |
| struct isl_depth_stencil_hiz_emit_info info = { }; |
| |
| if (iview) |
| info.view = &iview->planes[0].isl; |
| |
| if (image && (image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT)) { |
| uint32_t depth_plane = |
| anv_image_aspect_to_plane(image->aspects, VK_IMAGE_ASPECT_DEPTH_BIT); |
| const struct anv_surface *surface = &image->planes[depth_plane].surface; |
| |
| info.depth_surf = &surface->isl; |
| |
| info.depth_address = |
| anv_batch_emit_reloc(&cmd_buffer->batch, |
| dw + device->isl_dev.ds.depth_offset / 4, |
| image->planes[depth_plane].address.bo, |
| image->planes[depth_plane].address.offset + |
| surface->offset); |
| info.mocs = |
| anv_mocs_for_bo(device, image->planes[depth_plane].address.bo); |
| |
| const uint32_t ds = |
| cmd_buffer->state.subpass->depth_stencil_attachment->attachment; |
| info.hiz_usage = cmd_buffer->state.attachments[ds].aux_usage; |
| if (info.hiz_usage == ISL_AUX_USAGE_HIZ) { |
| info.hiz_surf = &image->planes[depth_plane].aux_surface.isl; |
| |
| info.hiz_address = |
| anv_batch_emit_reloc(&cmd_buffer->batch, |
| dw + device->isl_dev.ds.hiz_offset / 4, |
| image->planes[depth_plane].address.bo, |
| image->planes[depth_plane].address.offset + |
| image->planes[depth_plane].aux_surface.offset); |
| |
| info.depth_clear_value = ANV_HZ_FC_VAL; |
| } |
| } |
| |
| if (image && (image->aspects & VK_IMAGE_ASPECT_STENCIL_BIT)) { |
| uint32_t stencil_plane = |
| anv_image_aspect_to_plane(image->aspects, VK_IMAGE_ASPECT_STENCIL_BIT); |
| const struct anv_surface *surface = &image->planes[stencil_plane].surface; |
| |
| info.stencil_surf = &surface->isl; |
| |
| info.stencil_address = |
| anv_batch_emit_reloc(&cmd_buffer->batch, |
| dw + device->isl_dev.ds.stencil_offset / 4, |
| image->planes[stencil_plane].address.bo, |
| image->planes[stencil_plane].address.offset + |
| surface->offset); |
| info.mocs = |
| anv_mocs_for_bo(device, image->planes[stencil_plane].address.bo); |
| } |
| |
| isl_emit_depth_stencil_hiz_s(&device->isl_dev, dw, &info); |
| |
| cmd_buffer->state.hiz_enabled = info.hiz_usage == ISL_AUX_USAGE_HIZ; |
| } |
| |
| /** |
| * This ANDs the view mask of the current subpass with the pending clear |
| * views in the attachment to get the mask of views active in the subpass |
| * that still need to be cleared. |
| */ |
| static inline uint32_t |
| get_multiview_subpass_clear_mask(const struct anv_cmd_state *cmd_state, |
| const struct anv_attachment_state *att_state) |
| { |
| return cmd_state->subpass->view_mask & att_state->pending_clear_views; |
| } |
| |
| static inline bool |
| do_first_layer_clear(const struct anv_cmd_state *cmd_state, |
| const struct anv_attachment_state *att_state) |
| { |
| if (!cmd_state->subpass->view_mask) |
| return true; |
| |
| uint32_t pending_clear_mask = |
| get_multiview_subpass_clear_mask(cmd_state, att_state); |
| |
| return pending_clear_mask & 1; |
| } |
| |
| static inline bool |
| current_subpass_is_last_for_attachment(const struct anv_cmd_state *cmd_state, |
| uint32_t att_idx) |
| { |
| const uint32_t last_subpass_idx = |
| cmd_state->pass->attachments[att_idx].last_subpass_idx; |
| const struct anv_subpass *last_subpass = |
| &cmd_state->pass->subpasses[last_subpass_idx]; |
| return last_subpass == cmd_state->subpass; |
| } |
| |
| static void |
| cmd_buffer_begin_subpass(struct anv_cmd_buffer *cmd_buffer, |
| uint32_t subpass_id) |
| { |
| struct anv_cmd_state *cmd_state = &cmd_buffer->state; |
| struct anv_subpass *subpass = &cmd_state->pass->subpasses[subpass_id]; |
| cmd_state->subpass = subpass; |
| |
| cmd_buffer->state.gfx.dirty |= ANV_CMD_DIRTY_RENDER_TARGETS; |
| |
| /* Our implementation of VK_KHR_multiview uses instancing to draw the |
| * different views. If the client asks for instancing, we need to use the |
| * Instance Data Step Rate to ensure that we repeat the client's |
| * per-instance data once for each view. Since this bit is in |
| * VERTEX_BUFFER_STATE on gen7, we need to dirty vertex buffers at the top |
| * of each subpass. |
| */ |
| if (GEN_GEN == 7) |
| cmd_buffer->state.gfx.vb_dirty |= ~0; |
| |
| /* It is possible to start a render pass with an old pipeline. Because the |
| * render pass and subpass index are both baked into the pipeline, this is |
| * highly unlikely. In order to do so, it requires that you have a render |
| * pass with a single subpass and that you use that render pass twice |
| * back-to-back and use the same pipeline at the start of the second render |
| * pass as at the end of the first. In order to avoid unpredictable issues |
| * with this edge case, we just dirty the pipeline at the start of every |
| * subpass. |
| */ |
| cmd_buffer->state.gfx.dirty |= ANV_CMD_DIRTY_PIPELINE; |
| |
| /* Accumulate any subpass flushes that need to happen before the subpass */ |
| cmd_buffer->state.pending_pipe_bits |= |
| cmd_buffer->state.pass->subpass_flushes[subpass_id]; |
| |
| VkRect2D render_area = cmd_buffer->state.render_area; |
| struct anv_framebuffer *fb = cmd_buffer->state.framebuffer; |
| |
| bool is_multiview = subpass->view_mask != 0; |
| |
| for (uint32_t i = 0; i < subpass->attachment_count; ++i) { |
| const uint32_t a = subpass->attachments[i].attachment; |
| if (a == VK_ATTACHMENT_UNUSED) |
| continue; |
| |
| assert(a < cmd_state->pass->attachment_count); |
| struct anv_attachment_state *att_state = &cmd_state->attachments[a]; |
| |
| struct anv_image_view *iview = cmd_state->attachments[a].image_view; |
| const struct anv_image *image = iview->image; |
| |
| /* A resolve is necessary before use as an input attachment if the clear |
| * color or auxiliary buffer usage isn't supported by the sampler. |
| */ |
| const bool input_needs_resolve = |
| (att_state->fast_clear && !att_state->clear_color_is_zero_one) || |
| att_state->input_aux_usage != att_state->aux_usage; |
| |
| VkImageLayout target_layout; |
| if (iview->aspect_mask & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV && |
| !input_needs_resolve) { |
| /* Layout transitions before the final only help to enable sampling |
| * as an input attachment. If the input attachment supports sampling |
| * using the auxiliary surface, we can skip such transitions by |
| * making the target layout one that is CCS-aware. |
| */ |
| target_layout = VK_IMAGE_LAYOUT_COLOR_ATTACHMENT_OPTIMAL; |
| } else { |
| target_layout = subpass->attachments[i].layout; |
| } |
| |
| uint32_t base_layer, layer_count; |
| if (image->type == VK_IMAGE_TYPE_3D) { |
| base_layer = 0; |
| layer_count = anv_minify(iview->image->extent.depth, |
| iview->planes[0].isl.base_level); |
| } else { |
| base_layer = iview->planes[0].isl.base_array_layer; |
| layer_count = fb->layers; |
| } |
| |
| if (image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) { |
| assert(image->aspects == VK_IMAGE_ASPECT_COLOR_BIT); |
| transition_color_buffer(cmd_buffer, image, VK_IMAGE_ASPECT_COLOR_BIT, |
| iview->planes[0].isl.base_level, 1, |
| base_layer, layer_count, |
| att_state->current_layout, target_layout); |
| } |
| |
| if (image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT) { |
| transition_depth_buffer(cmd_buffer, image, |
| att_state->current_layout, target_layout); |
| att_state->aux_usage = |
| anv_layout_to_aux_usage(&cmd_buffer->device->info, image, |
| VK_IMAGE_ASPECT_DEPTH_BIT, target_layout); |
| } |
| |
| if (image->aspects & VK_IMAGE_ASPECT_STENCIL_BIT) { |
| transition_stencil_buffer(cmd_buffer, image, |
| iview->planes[0].isl.base_level, 1, |
| base_layer, layer_count, |
| att_state->current_layout, target_layout); |
| } |
| att_state->current_layout = target_layout; |
| |
| if (att_state->pending_clear_aspects & VK_IMAGE_ASPECT_COLOR_BIT) { |
| assert(att_state->pending_clear_aspects == VK_IMAGE_ASPECT_COLOR_BIT); |
| |
| /* Multi-planar images are not supported as attachments */ |
| assert(image->aspects == VK_IMAGE_ASPECT_COLOR_BIT); |
| assert(image->n_planes == 1); |
| |
| uint32_t base_clear_layer = iview->planes[0].isl.base_array_layer; |
| uint32_t clear_layer_count = fb->layers; |
| |
| if (att_state->fast_clear && |
| do_first_layer_clear(cmd_state, att_state)) { |
| /* We only support fast-clears on the first layer */ |
| assert(iview->planes[0].isl.base_level == 0); |
| assert(iview->planes[0].isl.base_array_layer == 0); |
| |
| union isl_color_value clear_color = {}; |
| anv_clear_color_from_att_state(&clear_color, att_state, iview); |
| if (iview->image->samples == 1) { |
| anv_image_ccs_op(cmd_buffer, image, |
| iview->planes[0].isl.format, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| 0, 0, 1, ISL_AUX_OP_FAST_CLEAR, |
| &clear_color, |
| false); |
| } else { |
| anv_image_mcs_op(cmd_buffer, image, |
| iview->planes[0].isl.format, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| 0, 1, ISL_AUX_OP_FAST_CLEAR, |
| &clear_color, |
| false); |
| } |
| base_clear_layer++; |
| clear_layer_count--; |
| if (is_multiview) |
| att_state->pending_clear_views &= ~1; |
| |
| if (att_state->clear_color_is_zero) { |
| /* This image has the auxiliary buffer enabled. We can mark the |
| * subresource as not needing a resolve because the clear color |
| * will match what's in every RENDER_SURFACE_STATE object when |
| * it's being used for sampling. |
| */ |
| set_image_fast_clear_state(cmd_buffer, iview->image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| ANV_FAST_CLEAR_DEFAULT_VALUE); |
| } else { |
| set_image_fast_clear_state(cmd_buffer, iview->image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| ANV_FAST_CLEAR_ANY); |
| } |
| } |
| |
| /* From the VkFramebufferCreateInfo spec: |
| * |
| * "If the render pass uses multiview, then layers must be one and each |
| * attachment requires a number of layers that is greater than the |
| * maximum bit index set in the view mask in the subpasses in which it |
| * is used." |
| * |
| * So if multiview is active we ignore the number of layers in the |
| * framebuffer and instead we honor the view mask from the subpass. |
| */ |
| if (is_multiview) { |
| assert(image->n_planes == 1); |
| uint32_t pending_clear_mask = |
| get_multiview_subpass_clear_mask(cmd_state, att_state); |
| |
| uint32_t layer_idx; |
| for_each_bit(layer_idx, pending_clear_mask) { |
| uint32_t layer = |
| iview->planes[0].isl.base_array_layer + layer_idx; |
| |
| anv_image_clear_color(cmd_buffer, image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| att_state->aux_usage, |
| iview->planes[0].isl.format, |
| iview->planes[0].isl.swizzle, |
| iview->planes[0].isl.base_level, |
| layer, 1, |
| render_area, |
| vk_to_isl_color(att_state->clear_value.color)); |
| } |
| |
| att_state->pending_clear_views &= ~pending_clear_mask; |
| } else if (clear_layer_count > 0) { |
| assert(image->n_planes == 1); |
| anv_image_clear_color(cmd_buffer, image, VK_IMAGE_ASPECT_COLOR_BIT, |
| att_state->aux_usage, |
| iview->planes[0].isl.format, |
| iview->planes[0].isl.swizzle, |
| iview->planes[0].isl.base_level, |
| base_clear_layer, clear_layer_count, |
| render_area, |
| vk_to_isl_color(att_state->clear_value.color)); |
| } |
| } else if (att_state->pending_clear_aspects & (VK_IMAGE_ASPECT_DEPTH_BIT | |
| VK_IMAGE_ASPECT_STENCIL_BIT)) { |
| if (att_state->fast_clear && !is_multiview) { |
| /* We currently only support HiZ for single-layer images */ |
| if (att_state->pending_clear_aspects & VK_IMAGE_ASPECT_DEPTH_BIT) { |
| assert(iview->image->planes[0].aux_usage == ISL_AUX_USAGE_HIZ); |
| assert(iview->planes[0].isl.base_level == 0); |
| assert(iview->planes[0].isl.base_array_layer == 0); |
| assert(fb->layers == 1); |
| } |
| |
| anv_image_hiz_clear(cmd_buffer, image, |
| att_state->pending_clear_aspects, |
| iview->planes[0].isl.base_level, |
| iview->planes[0].isl.base_array_layer, |
| fb->layers, render_area, |
| att_state->clear_value.depthStencil.stencil); |
| } else if (is_multiview) { |
| uint32_t pending_clear_mask = |
| get_multiview_subpass_clear_mask(cmd_state, att_state); |
| |
| uint32_t layer_idx; |
| for_each_bit(layer_idx, pending_clear_mask) { |
| uint32_t layer = |
| iview->planes[0].isl.base_array_layer + layer_idx; |
| |
| anv_image_clear_depth_stencil(cmd_buffer, image, |
| att_state->pending_clear_aspects, |
| att_state->aux_usage, |
| iview->planes[0].isl.base_level, |
| layer, 1, |
| render_area, |
| att_state->clear_value.depthStencil.depth, |
| att_state->clear_value.depthStencil.stencil); |
| } |
| |
| att_state->pending_clear_views &= ~pending_clear_mask; |
| } else { |
| anv_image_clear_depth_stencil(cmd_buffer, image, |
| att_state->pending_clear_aspects, |
| att_state->aux_usage, |
| iview->planes[0].isl.base_level, |
| iview->planes[0].isl.base_array_layer, |
| fb->layers, render_area, |
| att_state->clear_value.depthStencil.depth, |
| att_state->clear_value.depthStencil.stencil); |
| } |
| } else { |
| assert(att_state->pending_clear_aspects == 0); |
| } |
| |
| if (GEN_GEN < 10 && |
| (att_state->pending_load_aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) && |
| image->planes[0].aux_surface.isl.size_B > 0 && |
| iview->planes[0].isl.base_level == 0 && |
| iview->planes[0].isl.base_array_layer == 0) { |
| if (att_state->aux_usage != ISL_AUX_USAGE_NONE) { |
| genX(copy_fast_clear_dwords)(cmd_buffer, att_state->color.state, |
| image, VK_IMAGE_ASPECT_COLOR_BIT, |
| false /* copy to ss */); |
| } |
| |
| if (need_input_attachment_state(&cmd_state->pass->attachments[a]) && |
| att_state->input_aux_usage != ISL_AUX_USAGE_NONE) { |
| genX(copy_fast_clear_dwords)(cmd_buffer, att_state->input.state, |
| image, VK_IMAGE_ASPECT_COLOR_BIT, |
| false /* copy to ss */); |
| } |
| } |
| |
| if (subpass->attachments[i].usage == |
| VK_IMAGE_USAGE_COLOR_ATTACHMENT_BIT) { |
| /* We assume that if we're starting a subpass, we're going to do some |
| * rendering so we may end up with compressed data. |
| */ |
| genX(cmd_buffer_mark_image_written)(cmd_buffer, iview->image, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| att_state->aux_usage, |
| iview->planes[0].isl.base_level, |
| iview->planes[0].isl.base_array_layer, |
| fb->layers); |
| } else if (subpass->attachments[i].usage == |
| VK_IMAGE_USAGE_DEPTH_STENCIL_ATTACHMENT_BIT) { |
| /* We may be writing depth or stencil so we need to mark the surface. |
| * Unfortunately, there's no way to know at this point whether the |
| * depth or stencil tests used will actually write to the surface. |
| * |
| * Even though stencil may be plane 1, it always shares a base_level |
| * with depth. |
| */ |
| const struct isl_view *ds_view = &iview->planes[0].isl; |
| if (iview->aspect_mask & VK_IMAGE_ASPECT_DEPTH_BIT) { |
| genX(cmd_buffer_mark_image_written)(cmd_buffer, image, |
| VK_IMAGE_ASPECT_DEPTH_BIT, |
| att_state->aux_usage, |
| ds_view->base_level, |
| ds_view->base_array_layer, |
| fb->layers); |
| } |
| if (iview->aspect_mask & VK_IMAGE_ASPECT_STENCIL_BIT) { |
| /* Even though stencil may be plane 1, it always shares a |
| * base_level with depth. |
| */ |
| genX(cmd_buffer_mark_image_written)(cmd_buffer, image, |
| VK_IMAGE_ASPECT_STENCIL_BIT, |
| ISL_AUX_USAGE_NONE, |
| ds_view->base_level, |
| ds_view->base_array_layer, |
| fb->layers); |
| } |
| } |
| |
| /* If multiview is enabled, then we are only done clearing when we no |
| * longer have pending layers to clear, or when we have processed the |
| * last subpass that uses this attachment. |
| */ |
| if (!is_multiview || |
| att_state->pending_clear_views == 0 || |
| current_subpass_is_last_for_attachment(cmd_state, a)) { |
| att_state->pending_clear_aspects = 0; |
| } |
| |
| att_state->pending_load_aspects = 0; |
| } |
| |
| cmd_buffer_emit_depth_stencil(cmd_buffer); |
| } |
| |
| static enum blorp_filter |
| vk_to_blorp_resolve_mode(VkResolveModeFlagBitsKHR vk_mode) |
| { |
| switch (vk_mode) { |
| case VK_RESOLVE_MODE_SAMPLE_ZERO_BIT_KHR: |
| return BLORP_FILTER_SAMPLE_0; |
| case VK_RESOLVE_MODE_AVERAGE_BIT_KHR: |
| return BLORP_FILTER_AVERAGE; |
| case VK_RESOLVE_MODE_MIN_BIT_KHR: |
| return BLORP_FILTER_MIN_SAMPLE; |
| case VK_RESOLVE_MODE_MAX_BIT_KHR: |
| return BLORP_FILTER_MAX_SAMPLE; |
| default: |
| return BLORP_FILTER_NONE; |
| } |
| } |
| |
| static void |
| cmd_buffer_end_subpass(struct anv_cmd_buffer *cmd_buffer) |
| { |
| struct anv_cmd_state *cmd_state = &cmd_buffer->state; |
| struct anv_subpass *subpass = cmd_state->subpass; |
| uint32_t subpass_id = anv_get_subpass_id(&cmd_buffer->state); |
| struct anv_framebuffer *fb = cmd_buffer->state.framebuffer; |
| |
| if (subpass->has_color_resolve) { |
| /* We are about to do some MSAA resolves. We need to flush so that the |
| * result of writes to the MSAA color attachments show up in the sampler |
| * when we blit to the single-sampled resolve target. |
| */ |
| cmd_buffer->state.pending_pipe_bits |= |
| ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT | |
| ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT; |
| |
| for (uint32_t i = 0; i < subpass->color_count; ++i) { |
| uint32_t src_att = subpass->color_attachments[i].attachment; |
| uint32_t dst_att = subpass->resolve_attachments[i].attachment; |
| |
| if (dst_att == VK_ATTACHMENT_UNUSED) |
| continue; |
| |
| assert(src_att < cmd_buffer->state.pass->attachment_count); |
| assert(dst_att < cmd_buffer->state.pass->attachment_count); |
| |
| if (cmd_buffer->state.attachments[dst_att].pending_clear_aspects) { |
| /* From the Vulkan 1.0 spec: |
| * |
| * If the first use of an attachment in a render pass is as a |
| * resolve attachment, then the loadOp is effectively ignored |
| * as the resolve is guaranteed to overwrite all pixels in the |
| * render area. |
| */ |
| cmd_buffer->state.attachments[dst_att].pending_clear_aspects = 0; |
| } |
| |
| struct anv_image_view *src_iview = cmd_state->attachments[src_att].image_view; |
| struct anv_image_view *dst_iview = cmd_state->attachments[dst_att].image_view; |
| |
| const VkRect2D render_area = cmd_buffer->state.render_area; |
| |
| enum isl_aux_usage src_aux_usage = |
| cmd_buffer->state.attachments[src_att].aux_usage; |
| enum isl_aux_usage dst_aux_usage = |
| cmd_buffer->state.attachments[dst_att].aux_usage; |
| |
| assert(src_iview->aspect_mask == VK_IMAGE_ASPECT_COLOR_BIT && |
| dst_iview->aspect_mask == VK_IMAGE_ASPECT_COLOR_BIT); |
| |
| anv_image_msaa_resolve(cmd_buffer, |
| src_iview->image, src_aux_usage, |
| src_iview->planes[0].isl.base_level, |
| src_iview->planes[0].isl.base_array_layer, |
| dst_iview->image, dst_aux_usage, |
| dst_iview->planes[0].isl.base_level, |
| dst_iview->planes[0].isl.base_array_layer, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| render_area.offset.x, render_area.offset.y, |
| render_area.offset.x, render_area.offset.y, |
| render_area.extent.width, |
| render_area.extent.height, |
| fb->layers, BLORP_FILTER_NONE); |
| } |
| } |
| |
| if (subpass->ds_resolve_attachment) { |
| /* We are about to do some MSAA resolves. We need to flush so that the |
| * result of writes to the MSAA depth attachments show up in the sampler |
| * when we blit to the single-sampled resolve target. |
| */ |
| cmd_buffer->state.pending_pipe_bits |= |
| ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT | |
| ANV_PIPE_DEPTH_CACHE_FLUSH_BIT; |
| |
| uint32_t src_att = subpass->depth_stencil_attachment->attachment; |
| uint32_t dst_att = subpass->ds_resolve_attachment->attachment; |
| |
| assert(src_att < cmd_buffer->state.pass->attachment_count); |
| assert(dst_att < cmd_buffer->state.pass->attachment_count); |
| |
| if (cmd_buffer->state.attachments[dst_att].pending_clear_aspects) { |
| /* From the Vulkan 1.0 spec: |
| * |
| * If the first use of an attachment in a render pass is as a |
| * resolve attachment, then the loadOp is effectively ignored |
| * as the resolve is guaranteed to overwrite all pixels in the |
| * render area. |
| */ |
| cmd_buffer->state.attachments[dst_att].pending_clear_aspects = 0; |
| } |
| |
| struct anv_image_view *src_iview = cmd_state->attachments[src_att].image_view; |
| struct anv_image_view *dst_iview = cmd_state->attachments[dst_att].image_view; |
| |
| const VkRect2D render_area = cmd_buffer->state.render_area; |
| |
| if ((src_iview->image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT) && |
| subpass->depth_resolve_mode != VK_RESOLVE_MODE_NONE_KHR) { |
| |
| struct anv_attachment_state *src_state = |
| &cmd_state->attachments[src_att]; |
| struct anv_attachment_state *dst_state = |
| &cmd_state->attachments[dst_att]; |
| |
| /* MSAA resolves sample from the source attachment. Transition the |
| * depth attachment first to get rid of any HiZ that we may not be |
| * able to handle. |
| */ |
| transition_depth_buffer(cmd_buffer, src_iview->image, |
| src_state->current_layout, |
| VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL); |
| src_state->aux_usage = |
| anv_layout_to_aux_usage(&cmd_buffer->device->info, src_iview->image, |
| VK_IMAGE_ASPECT_DEPTH_BIT, |
| VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL); |
| src_state->current_layout = VK_IMAGE_LAYOUT_SHADER_READ_ONLY_OPTIMAL; |
| |
| /* MSAA resolves write to the resolve attachment as if it were any |
| * other transfer op. Transition the resolve attachment accordingly. |
| */ |
| VkImageLayout dst_initial_layout = dst_state->current_layout; |
| |
| /* If our render area is the entire size of the image, we're going to |
| * blow it all away so we can claim the initial layout is UNDEFINED |
| * and we'll get a HiZ ambiguate instead of a resolve. |
| */ |
| if (dst_iview->image->type != VK_IMAGE_TYPE_3D && |
| render_area.offset.x == 0 && render_area.offset.y == 0 && |
| render_area.extent.width == dst_iview->extent.width && |
| render_area.extent.height == dst_iview->extent.height) |
| dst_initial_layout = VK_IMAGE_LAYOUT_UNDEFINED; |
| |
| transition_depth_buffer(cmd_buffer, dst_iview->image, |
| dst_initial_layout, |
| VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL); |
| dst_state->aux_usage = |
| anv_layout_to_aux_usage(&cmd_buffer->device->info, dst_iview->image, |
| VK_IMAGE_ASPECT_DEPTH_BIT, |
| VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL); |
| dst_state->current_layout = VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL; |
| |
| enum blorp_filter filter = |
| vk_to_blorp_resolve_mode(subpass->depth_resolve_mode); |
| |
| anv_image_msaa_resolve(cmd_buffer, |
| src_iview->image, src_state->aux_usage, |
| src_iview->planes[0].isl.base_level, |
| src_iview->planes[0].isl.base_array_layer, |
| dst_iview->image, dst_state->aux_usage, |
| dst_iview->planes[0].isl.base_level, |
| dst_iview->planes[0].isl.base_array_layer, |
| VK_IMAGE_ASPECT_DEPTH_BIT, |
| render_area.offset.x, render_area.offset.y, |
| render_area.offset.x, render_area.offset.y, |
| render_area.extent.width, |
| render_area.extent.height, |
| fb->layers, filter); |
| } |
| |
| if ((src_iview->image->aspects & VK_IMAGE_ASPECT_STENCIL_BIT) && |
| subpass->stencil_resolve_mode != VK_RESOLVE_MODE_NONE_KHR) { |
| |
| enum isl_aux_usage src_aux_usage = ISL_AUX_USAGE_NONE; |
| enum isl_aux_usage dst_aux_usage = ISL_AUX_USAGE_NONE; |
| |
| enum blorp_filter filter = |
| vk_to_blorp_resolve_mode(subpass->stencil_resolve_mode); |
| |
| anv_image_msaa_resolve(cmd_buffer, |
| src_iview->image, src_aux_usage, |
| src_iview->planes[0].isl.base_level, |
| src_iview->planes[0].isl.base_array_layer, |
| dst_iview->image, dst_aux_usage, |
| dst_iview->planes[0].isl.base_level, |
| dst_iview->planes[0].isl.base_array_layer, |
| VK_IMAGE_ASPECT_STENCIL_BIT, |
| render_area.offset.x, render_area.offset.y, |
| render_area.offset.x, render_area.offset.y, |
| render_area.extent.width, |
| render_area.extent.height, |
| fb->layers, filter); |
| } |
| } |
| |
| #if GEN_GEN == 7 |
| /* On gen7, we have to store a texturable version of the stencil buffer in |
| * a shadow whenever VK_IMAGE_USAGE_SAMPLED_BIT is set and copy back and |
| * forth at strategic points. Stencil writes are only allowed in three |
| * layouts: |
| * |
| * - VK_IMAGE_LAYOUT_GENERAL |
| * - VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL |
| * - VK_IMAGE_LAYOUT_DEPTH_STENCIL_ATTACHMENT_OPTIMAL |
| * - VK_IMAGE_LAYOUT_DEPTH_READ_ONLY_STENCIL_ATTACHMENT_OPTIMAL |
| * |
| * For general, we have no nice opportunity to transition so we do the copy |
| * to the shadow unconditionally at the end of the subpass. For transfer |
| * destinations, we can update it as part of the transfer op. For the |
| * other two, we delay the copy until a transition into some other layout. |
| */ |
| if (subpass->depth_stencil_attachment) { |
| uint32_t a = subpass->depth_stencil_attachment->attachment; |
| assert(a != VK_ATTACHMENT_UNUSED); |
| |
| struct anv_attachment_state *att_state = &cmd_state->attachments[a]; |
| struct anv_image_view *iview = cmd_state->attachments[a].image_view;; |
| const struct anv_image *image = iview->image; |
| |
| if (image->aspects & VK_IMAGE_ASPECT_STENCIL_BIT) { |
| uint32_t plane = anv_image_aspect_to_plane(image->aspects, |
| VK_IMAGE_ASPECT_STENCIL_BIT); |
| |
| if (image->planes[plane].shadow_surface.isl.size_B > 0 && |
| att_state->current_layout == VK_IMAGE_LAYOUT_GENERAL) { |
| assert(image->aspects & VK_IMAGE_ASPECT_STENCIL_BIT); |
| anv_image_copy_to_shadow(cmd_buffer, image, |
| VK_IMAGE_ASPECT_STENCIL_BIT, |
| iview->planes[plane].isl.base_level, 1, |
| iview->planes[plane].isl.base_array_layer, |
| fb->layers); |
| } |
| } |
| } |
| #endif /* GEN_GEN == 7 */ |
| |
| for (uint32_t i = 0; i < subpass->attachment_count; ++i) { |
| const uint32_t a = subpass->attachments[i].attachment; |
| if (a == VK_ATTACHMENT_UNUSED) |
| continue; |
| |
| if (cmd_state->pass->attachments[a].last_subpass_idx != subpass_id) |
| continue; |
| |
| assert(a < cmd_state->pass->attachment_count); |
| struct anv_attachment_state *att_state = &cmd_state->attachments[a]; |
| struct anv_image_view *iview = cmd_state->attachments[a].image_view; |
| const struct anv_image *image = iview->image; |
| |
| if ((image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) && |
| image->vk_format != iview->vk_format) { |
| enum anv_fast_clear_type fast_clear_type = |
| anv_layout_to_fast_clear_type(&cmd_buffer->device->info, |
| image, VK_IMAGE_ASPECT_COLOR_BIT, |
| att_state->current_layout); |
| |
| /* If any clear color was used, flush it down the aux surfaces. If we |
| * don't do it now using the view's format we might use the clear |
| * color incorrectly in the following resolves (for example with an |
| * SRGB view & a UNORM image). |
| */ |
| if (fast_clear_type != ANV_FAST_CLEAR_NONE) { |
| anv_perf_warn(cmd_buffer->device->instance, iview, |
| "Doing a partial resolve to get rid of clear color at the " |
| "end of a renderpass due to an image/view format mismatch"); |
| |
| uint32_t base_layer, layer_count; |
| if (image->type == VK_IMAGE_TYPE_3D) { |
| base_layer = 0; |
| layer_count = anv_minify(iview->image->extent.depth, |
| iview->planes[0].isl.base_level); |
| } else { |
| base_layer = iview->planes[0].isl.base_array_layer; |
| layer_count = fb->layers; |
| } |
| |
| for (uint32_t a = 0; a < layer_count; a++) { |
| uint32_t array_layer = base_layer + a; |
| if (image->samples == 1) { |
| anv_cmd_predicated_ccs_resolve(cmd_buffer, image, |
| iview->planes[0].isl.format, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| iview->planes[0].isl.base_level, |
| array_layer, |
| ISL_AUX_OP_PARTIAL_RESOLVE, |
| ANV_FAST_CLEAR_NONE); |
| } else { |
| anv_cmd_predicated_mcs_resolve(cmd_buffer, image, |
| iview->planes[0].isl.format, |
| VK_IMAGE_ASPECT_COLOR_BIT, |
| base_layer, |
| ISL_AUX_OP_PARTIAL_RESOLVE, |
| ANV_FAST_CLEAR_NONE); |
| } |
| } |
| } |
| } |
| |
| /* Transition the image into the final layout for this render pass */ |
| VkImageLayout target_layout = |
| cmd_state->pass->attachments[a].final_layout; |
| |
| uint32_t base_layer, layer_count; |
| if (image->type == VK_IMAGE_TYPE_3D) { |
| base_layer = 0; |
| layer_count = anv_minify(iview->image->extent.depth, |
| iview->planes[0].isl.base_level); |
| } else { |
| base_layer = iview->planes[0].isl.base_array_layer; |
| layer_count = fb->layers; |
| } |
| |
| if (image->aspects & VK_IMAGE_ASPECT_ANY_COLOR_BIT_ANV) { |
| assert(image->aspects == VK_IMAGE_ASPECT_COLOR_BIT); |
| transition_color_buffer(cmd_buffer, image, VK_IMAGE_ASPECT_COLOR_BIT, |
| iview->planes[0].isl.base_level, 1, |
| base_layer, layer_count, |
| att_state->current_layout, target_layout); |
| } |
| |
| if (image->aspects & VK_IMAGE_ASPECT_DEPTH_BIT) { |
| transition_depth_buffer(cmd_buffer, image, |
| att_state->current_layout, target_layout); |
| } |
| |
| if (image->aspects & VK_IMAGE_ASPECT_STENCIL_BIT) { |
| transition_stencil_buffer(cmd_buffer, image, |
| iview->planes[0].isl.base_level, 1, |
| base_layer, layer_count, |
| att_state->current_layout, target_layout); |
| } |
| } |
| |
| /* Accumulate any subpass flushes that need to happen after the subpass. |
| * Yes, they do get accumulated twice in the NextSubpass case but since |
| * genX_CmdNextSubpass just calls end/begin back-to-back, we just end up |
| * ORing the bits in twice so it's harmless. |
| */ |
| cmd_buffer->state.pending_pipe_bits |= |
| cmd_buffer->state.pass->subpass_flushes[subpass_id + 1]; |
| } |
| |
| void genX(CmdBeginRenderPass)( |
| VkCommandBuffer commandBuffer, |
| const VkRenderPassBeginInfo* pRenderPassBegin, |
| VkSubpassContents contents) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_render_pass, pass, pRenderPassBegin->renderPass); |
| ANV_FROM_HANDLE(anv_framebuffer, framebuffer, pRenderPassBegin->framebuffer); |
| |
| cmd_buffer->state.framebuffer = framebuffer; |
| cmd_buffer->state.pass = pass; |
| cmd_buffer->state.render_area = pRenderPassBegin->renderArea; |
| VkResult result = |
| genX(cmd_buffer_setup_attachments)(cmd_buffer, pass, pRenderPassBegin); |
| |
| /* If we failed to setup the attachments we should not try to go further */ |
| if (result != VK_SUCCESS) { |
| assert(anv_batch_has_error(&cmd_buffer->batch)); |
| return; |
| } |
| |
| genX(flush_pipeline_select_3d)(cmd_buffer); |
| |
| cmd_buffer_begin_subpass(cmd_buffer, 0); |
| } |
| |
| void genX(CmdBeginRenderPass2KHR)( |
| VkCommandBuffer commandBuffer, |
| const VkRenderPassBeginInfo* pRenderPassBeginInfo, |
| const VkSubpassBeginInfoKHR* pSubpassBeginInfo) |
| { |
| genX(CmdBeginRenderPass)(commandBuffer, pRenderPassBeginInfo, |
| pSubpassBeginInfo->contents); |
| } |
| |
| void genX(CmdNextSubpass)( |
| VkCommandBuffer commandBuffer, |
| VkSubpassContents contents) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| assert(cmd_buffer->level == VK_COMMAND_BUFFER_LEVEL_PRIMARY); |
| |
| uint32_t prev_subpass = anv_get_subpass_id(&cmd_buffer->state); |
| cmd_buffer_end_subpass(cmd_buffer); |
| cmd_buffer_begin_subpass(cmd_buffer, prev_subpass + 1); |
| } |
| |
| void genX(CmdNextSubpass2KHR)( |
| VkCommandBuffer commandBuffer, |
| const VkSubpassBeginInfoKHR* pSubpassBeginInfo, |
| const VkSubpassEndInfoKHR* pSubpassEndInfo) |
| { |
| genX(CmdNextSubpass)(commandBuffer, pSubpassBeginInfo->contents); |
| } |
| |
| void genX(CmdEndRenderPass)( |
| VkCommandBuffer commandBuffer) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| |
| if (anv_batch_has_error(&cmd_buffer->batch)) |
| return; |
| |
| cmd_buffer_end_subpass(cmd_buffer); |
| |
| cmd_buffer->state.hiz_enabled = false; |
| |
| #ifndef NDEBUG |
| anv_dump_add_attachments(cmd_buffer); |
| #endif |
| |
| /* Remove references to render pass specific state. This enables us to |
| * detect whether or not we're in a renderpass. |
| */ |
| cmd_buffer->state.framebuffer = NULL; |
| cmd_buffer->state.pass = NULL; |
| cmd_buffer->state.subpass = NULL; |
| } |
| |
| void genX(CmdEndRenderPass2KHR)( |
| VkCommandBuffer commandBuffer, |
| const VkSubpassEndInfoKHR* pSubpassEndInfo) |
| { |
| genX(CmdEndRenderPass)(commandBuffer); |
| } |
| |
| void |
| genX(cmd_emit_conditional_render_predicate)(struct anv_cmd_buffer *cmd_buffer) |
| { |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC0), |
| gen_mi_reg32(ANV_PREDICATE_RESULT_REG)); |
| gen_mi_store(&b, gen_mi_reg64(MI_PREDICATE_SRC1), gen_mi_imm(0)); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_PREDICATE), mip) { |
| mip.LoadOperation = LOAD_LOADINV; |
| mip.CombineOperation = COMBINE_SET; |
| mip.CompareOperation = COMPARE_SRCS_EQUAL; |
| } |
| #endif |
| } |
| |
| #if GEN_GEN >= 8 || GEN_IS_HASWELL |
| void genX(CmdBeginConditionalRenderingEXT)( |
| VkCommandBuffer commandBuffer, |
| const VkConditionalRenderingBeginInfoEXT* pConditionalRenderingBegin) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_buffer, buffer, pConditionalRenderingBegin->buffer); |
| struct anv_cmd_state *cmd_state = &cmd_buffer->state; |
| struct anv_address value_address = |
| anv_address_add(buffer->address, pConditionalRenderingBegin->offset); |
| |
| const bool isInverted = pConditionalRenderingBegin->flags & |
| VK_CONDITIONAL_RENDERING_INVERTED_BIT_EXT; |
| |
| cmd_state->conditional_render_enabled = true; |
| |
| genX(cmd_buffer_apply_pipe_flushes)(cmd_buffer); |
| |
| struct gen_mi_builder b; |
| gen_mi_builder_init(&b, &cmd_buffer->batch); |
| |
| /* Section 19.4 of the Vulkan 1.1.85 spec says: |
| * |
| * If the value of the predicate in buffer memory changes |
| * while conditional rendering is active, the rendering commands |
| * may be discarded in an implementation-dependent way. |
| * Some implementations may latch the value of the predicate |
| * upon beginning conditional rendering while others |
| * may read it before every rendering command. |
| * |
| * So it's perfectly fine to read a value from the buffer once. |
| */ |
| struct gen_mi_value value = gen_mi_mem32(value_address); |
| |
| /* Precompute predicate result, it is necessary to support secondary |
| * command buffers since it is unknown if conditional rendering is |
| * inverted when populating them. |
| */ |
| gen_mi_store(&b, gen_mi_reg64(ANV_PREDICATE_RESULT_REG), |
| isInverted ? gen_mi_uge(&b, gen_mi_imm(0), value) : |
| gen_mi_ult(&b, gen_mi_imm(0), value)); |
| } |
| |
| void genX(CmdEndConditionalRenderingEXT)( |
| VkCommandBuffer commandBuffer) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| struct anv_cmd_state *cmd_state = &cmd_buffer->state; |
| |
| cmd_state->conditional_render_enabled = false; |
| } |
| #endif |
| |
| /* Set of stage bits for which are pipelined, i.e. they get queued by the |
| * command streamer for later execution. |
| */ |
| #define ANV_PIPELINE_STAGE_PIPELINED_BITS \ |
| (VK_PIPELINE_STAGE_VERTEX_INPUT_BIT | \ |
| VK_PIPELINE_STAGE_VERTEX_SHADER_BIT | \ |
| VK_PIPELINE_STAGE_TESSELLATION_CONTROL_SHADER_BIT | \ |
| VK_PIPELINE_STAGE_TESSELLATION_EVALUATION_SHADER_BIT | \ |
| VK_PIPELINE_STAGE_GEOMETRY_SHADER_BIT | \ |
| VK_PIPELINE_STAGE_FRAGMENT_SHADER_BIT | \ |
| VK_PIPELINE_STAGE_EARLY_FRAGMENT_TESTS_BIT | \ |
| VK_PIPELINE_STAGE_LATE_FRAGMENT_TESTS_BIT | \ |
| VK_PIPELINE_STAGE_COLOR_ATTACHMENT_OUTPUT_BIT | \ |
| VK_PIPELINE_STAGE_COMPUTE_SHADER_BIT | \ |
| VK_PIPELINE_STAGE_TRANSFER_BIT | \ |
| VK_PIPELINE_STAGE_BOTTOM_OF_PIPE_BIT | \ |
| VK_PIPELINE_STAGE_ALL_GRAPHICS_BIT | \ |
| VK_PIPELINE_STAGE_ALL_COMMANDS_BIT) |
| |
| void genX(CmdSetEvent)( |
| VkCommandBuffer commandBuffer, |
| VkEvent _event, |
| VkPipelineStageFlags stageMask) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_event, event, _event); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| if (stageMask & ANV_PIPELINE_STAGE_PIPELINED_BITS) { |
| pc.StallAtPixelScoreboard = true; |
| pc.CommandStreamerStallEnable = true; |
| } |
| |
| pc.DestinationAddressType = DAT_PPGTT, |
| pc.PostSyncOperation = WriteImmediateData, |
| pc.Address = (struct anv_address) { |
| cmd_buffer->device->dynamic_state_pool.block_pool.bo, |
| event->state.offset |
| }; |
| pc.ImmediateData = VK_EVENT_SET; |
| } |
| } |
| |
| void genX(CmdResetEvent)( |
| VkCommandBuffer commandBuffer, |
| VkEvent _event, |
| VkPipelineStageFlags stageMask) |
| { |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| ANV_FROM_HANDLE(anv_event, event, _event); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(PIPE_CONTROL), pc) { |
| if (stageMask & ANV_PIPELINE_STAGE_PIPELINED_BITS) { |
| pc.StallAtPixelScoreboard = true; |
| pc.CommandStreamerStallEnable = true; |
| } |
| |
| pc.DestinationAddressType = DAT_PPGTT; |
| pc.PostSyncOperation = WriteImmediateData; |
| pc.Address = (struct anv_address) { |
| cmd_buffer->device->dynamic_state_pool.block_pool.bo, |
| event->state.offset |
| }; |
| pc.ImmediateData = VK_EVENT_RESET; |
| } |
| } |
| |
| void genX(CmdWaitEvents)( |
| VkCommandBuffer commandBuffer, |
| uint32_t eventCount, |
| const VkEvent* pEvents, |
| VkPipelineStageFlags srcStageMask, |
| VkPipelineStageFlags destStageMask, |
| uint32_t memoryBarrierCount, |
| const VkMemoryBarrier* pMemoryBarriers, |
| uint32_t bufferMemoryBarrierCount, |
| const VkBufferMemoryBarrier* pBufferMemoryBarriers, |
| uint32_t imageMemoryBarrierCount, |
| const VkImageMemoryBarrier* pImageMemoryBarriers) |
| { |
| #if GEN_GEN >= 8 |
| ANV_FROM_HANDLE(anv_cmd_buffer, cmd_buffer, commandBuffer); |
| |
| for (uint32_t i = 0; i < eventCount; i++) { |
| ANV_FROM_HANDLE(anv_event, event, pEvents[i]); |
| |
| anv_batch_emit(&cmd_buffer->batch, GENX(MI_SEMAPHORE_WAIT), sem) { |
| sem.WaitMode = PollingMode, |
| sem.CompareOperation = COMPARE_SAD_EQUAL_SDD, |
| sem.SemaphoreDataDword = VK_EVENT_SET, |
| sem.SemaphoreAddress = (struct anv_address) { |
| cmd_buffer->device->dynamic_state_pool.block_pool.bo, |
| event->state.offset |
| }; |
| } |
| } |
| #else |
| anv_finishme("Implement events on gen7"); |
| #endif |
| |
| genX(CmdPipelineBarrier)(commandBuffer, srcStageMask, destStageMask, |
| false, /* byRegion */ |
| memoryBarrierCount, pMemoryBarriers, |
| bufferMemoryBarrierCount, pBufferMemoryBarriers, |
| imageMemoryBarrierCount, pImageMemoryBarriers); |
| } |