| /* |
| * Copyright (c) 2015 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS |
| * IN THE SOFTWARE. |
| */ |
| |
| #include "common/gen_l3_config.h" |
| |
| #include "brw_context.h" |
| #include "brw_defines.h" |
| #include "brw_state.h" |
| #include "intel_batchbuffer.h" |
| |
| /** |
| * Calculate the desired L3 partitioning based on the current state of the |
| * pipeline. For now this simply returns the conservative defaults calculated |
| * by get_default_l3_weights(), but we could probably do better by gathering |
| * more statistics from the pipeline state (e.g. guess of expected URB usage |
| * and bound surfaces), or by using feed-back from performance counters. |
| */ |
| static struct gen_l3_weights |
| get_pipeline_state_l3_weights(const struct brw_context *brw) |
| { |
| const struct brw_stage_state *stage_states[] = { |
| [MESA_SHADER_VERTEX] = &brw->vs.base, |
| [MESA_SHADER_TESS_CTRL] = &brw->tcs.base, |
| [MESA_SHADER_TESS_EVAL] = &brw->tes.base, |
| [MESA_SHADER_GEOMETRY] = &brw->gs.base, |
| [MESA_SHADER_FRAGMENT] = &brw->wm.base, |
| [MESA_SHADER_COMPUTE] = &brw->cs.base |
| }; |
| bool needs_dc = false, needs_slm = false; |
| |
| for (unsigned i = 0; i < ARRAY_SIZE(stage_states); i++) { |
| const struct gl_shader_program *prog = |
| brw->ctx._Shader->CurrentProgram[stage_states[i]->stage]; |
| const struct brw_stage_prog_data *prog_data = stage_states[i]->prog_data; |
| |
| needs_dc |= (prog && (prog->data->NumAtomicBuffers || |
| prog->data->NumShaderStorageBlocks)) || |
| (prog_data && (prog_data->total_scratch || prog_data->nr_image_params)); |
| needs_slm |= prog_data && prog_data->total_shared; |
| } |
| |
| return gen_get_default_l3_weights(&brw->screen->devinfo, |
| needs_dc, needs_slm); |
| } |
| |
| /** |
| * Program the hardware to use the specified L3 configuration. |
| */ |
| static void |
| setup_l3_config(struct brw_context *brw, const struct gen_l3_config *cfg) |
| { |
| const bool has_dc = cfg->n[GEN_L3P_DC] || cfg->n[GEN_L3P_ALL]; |
| const bool has_is = cfg->n[GEN_L3P_IS] || cfg->n[GEN_L3P_RO] || |
| cfg->n[GEN_L3P_ALL]; |
| const bool has_c = cfg->n[GEN_L3P_C] || cfg->n[GEN_L3P_RO] || |
| cfg->n[GEN_L3P_ALL]; |
| const bool has_t = cfg->n[GEN_L3P_T] || cfg->n[GEN_L3P_RO] || |
| cfg->n[GEN_L3P_ALL]; |
| const bool has_slm = cfg->n[GEN_L3P_SLM]; |
| |
| /* According to the hardware docs, the L3 partitioning can only be changed |
| * while the pipeline is completely drained and the caches are flushed, |
| * which involves a first PIPE_CONTROL flush which stalls the pipeline... |
| */ |
| brw_emit_pipe_control_flush(brw, |
| PIPE_CONTROL_DATA_CACHE_FLUSH | |
| PIPE_CONTROL_NO_WRITE | |
| PIPE_CONTROL_CS_STALL); |
| |
| /* ...followed by a second pipelined PIPE_CONTROL that initiates |
| * invalidation of the relevant caches. Note that because RO invalidation |
| * happens at the top of the pipeline (i.e. right away as the PIPE_CONTROL |
| * command is processed by the CS) we cannot combine it with the previous |
| * stalling flush as the hardware documentation suggests, because that |
| * would cause the CS to stall on previous rendering *after* RO |
| * invalidation and wouldn't prevent the RO caches from being polluted by |
| * concurrent rendering before the stall completes. This intentionally |
| * doesn't implement the SKL+ hardware workaround suggesting to enable CS |
| * stall on PIPE_CONTROLs with the texture cache invalidation bit set for |
| * GPGPU workloads because the previous and subsequent PIPE_CONTROLs |
| * already guarantee that there is no concurrent GPGPU kernel execution |
| * (see SKL HSD 2132585). |
| */ |
| brw_emit_pipe_control_flush(brw, |
| PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE | |
| PIPE_CONTROL_CONST_CACHE_INVALIDATE | |
| PIPE_CONTROL_INSTRUCTION_INVALIDATE | |
| PIPE_CONTROL_STATE_CACHE_INVALIDATE | |
| PIPE_CONTROL_NO_WRITE); |
| |
| /* Now send a third stalling flush to make sure that invalidation is |
| * complete when the L3 configuration registers are modified. |
| */ |
| brw_emit_pipe_control_flush(brw, |
| PIPE_CONTROL_DATA_CACHE_FLUSH | |
| PIPE_CONTROL_NO_WRITE | |
| PIPE_CONTROL_CS_STALL); |
| |
| if (brw->gen >= 8) { |
| assert(!cfg->n[GEN_L3P_IS] && !cfg->n[GEN_L3P_C] && !cfg->n[GEN_L3P_T]); |
| |
| BEGIN_BATCH(3); |
| OUT_BATCH(MI_LOAD_REGISTER_IMM | (3 - 2)); |
| |
| /* Set up the L3 partitioning. */ |
| OUT_BATCH(GEN8_L3CNTLREG); |
| OUT_BATCH((has_slm ? GEN8_L3CNTLREG_SLM_ENABLE : 0) | |
| SET_FIELD(cfg->n[GEN_L3P_URB], GEN8_L3CNTLREG_URB_ALLOC) | |
| SET_FIELD(cfg->n[GEN_L3P_RO], GEN8_L3CNTLREG_RO_ALLOC) | |
| SET_FIELD(cfg->n[GEN_L3P_DC], GEN8_L3CNTLREG_DC_ALLOC) | |
| SET_FIELD(cfg->n[GEN_L3P_ALL], GEN8_L3CNTLREG_ALL_ALLOC)); |
| |
| ADVANCE_BATCH(); |
| |
| } else { |
| assert(!cfg->n[GEN_L3P_ALL]); |
| |
| /* When enabled SLM only uses a portion of the L3 on half of the banks, |
| * the matching space on the remaining banks has to be allocated to a |
| * client (URB for all validated configurations) set to the |
| * lower-bandwidth 2-bank address hashing mode. |
| */ |
| const bool urb_low_bw = has_slm && !brw->is_baytrail; |
| assert(!urb_low_bw || cfg->n[GEN_L3P_URB] == cfg->n[GEN_L3P_SLM]); |
| |
| /* Minimum number of ways that can be allocated to the URB. */ |
| const unsigned n0_urb = (brw->is_baytrail ? 32 : 0); |
| assert(cfg->n[GEN_L3P_URB] >= n0_urb); |
| |
| BEGIN_BATCH(7); |
| OUT_BATCH(MI_LOAD_REGISTER_IMM | (7 - 2)); |
| |
| /* Demote any clients with no ways assigned to LLC. */ |
| OUT_BATCH(GEN7_L3SQCREG1); |
| OUT_BATCH((brw->is_haswell ? HSW_L3SQCREG1_SQGHPCI_DEFAULT : |
| brw->is_baytrail ? VLV_L3SQCREG1_SQGHPCI_DEFAULT : |
| IVB_L3SQCREG1_SQGHPCI_DEFAULT) | |
| (has_dc ? 0 : GEN7_L3SQCREG1_CONV_DC_UC) | |
| (has_is ? 0 : GEN7_L3SQCREG1_CONV_IS_UC) | |
| (has_c ? 0 : GEN7_L3SQCREG1_CONV_C_UC) | |
| (has_t ? 0 : GEN7_L3SQCREG1_CONV_T_UC)); |
| |
| /* Set up the L3 partitioning. */ |
| OUT_BATCH(GEN7_L3CNTLREG2); |
| OUT_BATCH((has_slm ? GEN7_L3CNTLREG2_SLM_ENABLE : 0) | |
| SET_FIELD(cfg->n[GEN_L3P_URB] - n0_urb, GEN7_L3CNTLREG2_URB_ALLOC) | |
| (urb_low_bw ? GEN7_L3CNTLREG2_URB_LOW_BW : 0) | |
| SET_FIELD(cfg->n[GEN_L3P_ALL], GEN7_L3CNTLREG2_ALL_ALLOC) | |
| SET_FIELD(cfg->n[GEN_L3P_RO], GEN7_L3CNTLREG2_RO_ALLOC) | |
| SET_FIELD(cfg->n[GEN_L3P_DC], GEN7_L3CNTLREG2_DC_ALLOC)); |
| OUT_BATCH(GEN7_L3CNTLREG3); |
| OUT_BATCH(SET_FIELD(cfg->n[GEN_L3P_IS], GEN7_L3CNTLREG3_IS_ALLOC) | |
| SET_FIELD(cfg->n[GEN_L3P_C], GEN7_L3CNTLREG3_C_ALLOC) | |
| SET_FIELD(cfg->n[GEN_L3P_T], GEN7_L3CNTLREG3_T_ALLOC)); |
| |
| ADVANCE_BATCH(); |
| |
| if (can_do_hsw_l3_atomics(brw->screen)) { |
| /* Enable L3 atomics on HSW if we have a DC partition, otherwise keep |
| * them disabled to avoid crashing the system hard. |
| */ |
| BEGIN_BATCH(5); |
| OUT_BATCH(MI_LOAD_REGISTER_IMM | (5 - 2)); |
| OUT_BATCH(HSW_SCRATCH1); |
| OUT_BATCH(has_dc ? 0 : HSW_SCRATCH1_L3_ATOMIC_DISABLE); |
| OUT_BATCH(HSW_ROW_CHICKEN3); |
| OUT_BATCH(REG_MASK(HSW_ROW_CHICKEN3_L3_ATOMIC_DISABLE) | |
| (has_dc ? 0 : HSW_ROW_CHICKEN3_L3_ATOMIC_DISABLE)); |
| ADVANCE_BATCH(); |
| } |
| } |
| } |
| |
| /** |
| * Update the URB size in the context state for the specified L3 |
| * configuration. |
| */ |
| static void |
| update_urb_size(struct brw_context *brw, const struct gen_l3_config *cfg) |
| { |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| const unsigned sz = gen_get_l3_config_urb_size(devinfo, cfg); |
| |
| if (brw->urb.size != sz) { |
| brw->urb.size = sz; |
| brw->ctx.NewDriverState |= BRW_NEW_URB_SIZE; |
| } |
| } |
| |
| static void |
| emit_l3_state(struct brw_context *brw) |
| { |
| const struct gen_l3_weights w = get_pipeline_state_l3_weights(brw); |
| const float dw = gen_diff_l3_weights(w, gen_get_l3_config_weights(brw->l3.config)); |
| /* The distance between any two compatible weight vectors cannot exceed two |
| * due to the triangle inequality. |
| */ |
| const float large_dw_threshold = 2.0; |
| /* Somewhat arbitrary, simply makes sure that there will be no repeated |
| * transitions to the same L3 configuration, could probably do better here. |
| */ |
| const float small_dw_threshold = 0.5; |
| /* If we're emitting a new batch the caches should already be clean and the |
| * transition should be relatively cheap, so it shouldn't hurt much to use |
| * the smaller threshold. Otherwise use the larger threshold so that we |
| * only reprogram the L3 mid-batch if the most recently programmed |
| * configuration is incompatible with the current pipeline state. |
| */ |
| const float dw_threshold = (brw->ctx.NewDriverState & BRW_NEW_BATCH ? |
| small_dw_threshold : large_dw_threshold); |
| |
| if (dw > dw_threshold && can_do_pipelined_register_writes(brw->screen)) { |
| const struct gen_l3_config *const cfg = |
| gen_get_l3_config(&brw->screen->devinfo, w); |
| |
| setup_l3_config(brw, cfg); |
| update_urb_size(brw, cfg); |
| brw->l3.config = cfg; |
| |
| if (unlikely(INTEL_DEBUG & DEBUG_L3)) { |
| fprintf(stderr, "L3 config transition (%f > %f): ", dw, dw_threshold); |
| gen_dump_l3_config(cfg, stderr); |
| } |
| } |
| } |
| |
| const struct brw_tracked_state gen7_l3_state = { |
| .dirty = { |
| .mesa = 0, |
| .brw = BRW_NEW_BATCH | |
| BRW_NEW_BLORP | |
| BRW_NEW_CS_PROG_DATA | |
| BRW_NEW_FS_PROG_DATA | |
| BRW_NEW_GS_PROG_DATA | |
| BRW_NEW_VS_PROG_DATA, |
| }, |
| .emit = emit_l3_state |
| }; |
| |
| /** |
| * Hack to restore the default L3 configuration. |
| * |
| * This will be called at the end of every batch in order to reset the L3 |
| * configuration to the default values for the time being until the kernel is |
| * fixed. Until kernel commit 6702cf16e0ba8b0129f5aa1b6609d4e9c70bc13b |
| * (included in v4.1) we would set the MI_RESTORE_INHIBIT bit when submitting |
| * batch buffers for the default context used by the DDX, which meant that any |
| * context state changed by the GL would leak into the DDX, the assumption |
| * being that the DDX would initialize any state it cares about manually. The |
| * DDX is however not careful enough to program an L3 configuration |
| * explicitly, and it makes assumptions about it (URB size) which won't hold |
| * and cause it to misrender if we let our L3 set-up to leak into the DDX. |
| * |
| * Since v4.1 of the Linux kernel the default context is saved and restored |
| * normally, so it's far less likely for our L3 programming to interfere with |
| * other contexts -- In fact restoring the default L3 configuration at the end |
| * of the batch will be redundant most of the time. A kind of state leak is |
| * still possible though if the context making assumptions about L3 state is |
| * created immediately after our context was active (e.g. without the DDX |
| * default context being scheduled in between) because at present the DRM |
| * doesn't fully initialize the contents of newly created contexts and instead |
| * sets the MI_RESTORE_INHIBIT flag causing it to inherit the state from the |
| * last active context. |
| * |
| * It's possible to realize such a scenario if, say, an X server (or a GL |
| * application using an outdated non-L3-aware Mesa version) is started while |
| * another GL application is running and happens to have modified the L3 |
| * configuration, or if no X server is running at all and a GL application |
| * using a non-L3-aware Mesa version is started after another GL application |
| * ran and modified the L3 configuration -- The latter situation can actually |
| * be reproduced easily on IVB in our CI system. |
| */ |
| void |
| gen7_restore_default_l3_config(struct brw_context *brw) |
| { |
| const struct gen_device_info *devinfo = &brw->screen->devinfo; |
| const struct gen_l3_config *const cfg = gen_get_default_l3_config(devinfo); |
| |
| if (cfg != brw->l3.config && |
| can_do_pipelined_register_writes(brw->screen)) { |
| setup_l3_config(brw, cfg); |
| update_urb_size(brw, cfg); |
| brw->l3.config = cfg; |
| } |
| } |