.gitlab-ci/deqp-runner.sh - third_party/mesa - Git at Google

 #!/bin/sh

 set -ex

 DEQP_OPTIONS="--deqp-surface-width=256 --deqp-surface-height=256"
 DEQP_OPTIONS="$DEQP_OPTIONS --deqp-surface-type=pbuffer"
 DEQP_OPTIONS="$DEQP_OPTIONS --deqp-gl-config-name=rgba8888d24s8ms0"
 DEQP_OPTIONS="$DEQP_OPTIONS --deqp-visibility=hidden"

 # It would be nice to be able to enable the watchdog, so that hangs in a test
 # don't need to wait the full hour for the run to time out.  However, some
 # shaders end up taking long enough to compile
 # (dEQP-GLES31.functional.ubo.random.all_per_block_buffers.20 for example)
 # that they'll sporadically trigger the watchdog.
 #DEQP_OPTIONS="$DEQP_OPTIONS --deqp-watchdog=enable"

 if [ -z "$DEQP_VER" ]; then
    echo 'DEQP_VER must be set to something like "gles2", "gles31" or "vk" for the test run'
    exit 1
 fi

 if [ "$DEQP_VER" = "vk" ]; then
    if [ -z "$VK_DRIVER" ]; then
       echo 'VK_DRIVER must be to something like "radeon" or "intel" for the test run'
       exit 1
    fi
 fi

 if [ -z "$DEQP_SKIPS" ]; then
    echo 'DEQP_SKIPS must be set to something like "deqp-default-skips.txt"'
    exit 1
 fi

 INSTALL=`pwd`/install

 # Set up the driver environment.
 export LD_LIBRARY_PATH=`pwd`/install/lib/
 export EGL_PLATFORM=surfaceless
 export VK_ICD_FILENAMES=`pwd`/install/share/vulkan/icd.d/"$VK_DRIVER"_icd.x86_64.json

 # the runner was failing to look for libkms in /usr/local/lib for some reason
 # I never figured out.
 export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib

 RESULTS=`pwd`/results
 mkdir -p $RESULTS

 # Generate test case list file.
 if [ "$DEQP_VER" = "vk" ]; then
    cp /deqp/mustpass/vk-master.txt /tmp/case-list.txt
    DEQP=/deqp/external/vulkancts/modules/vulkan/deqp-vk
 else
    cp /deqp/mustpass/$DEQP_VER-master.txt /tmp/case-list.txt
    DEQP=/deqp/modules/$DEQP_VER/deqp-$DEQP_VER
 fi

 # If the job is parallel, take the corresponding fraction of the caselist.
 # Note: N~M is a gnu sed extension to match every nth line (first line is #1).
 if [ -n "$CI_NODE_INDEX" ]; then
    sed -ni $CI_NODE_INDEX~$CI_NODE_TOTAL"p" /tmp/case-list.txt
 fi

 if [ ! -s /tmp/case-list.txt ]; then
     echo "Caselist generation failed"
     exit 1
 fi

 if [ -n "$DEQP_EXPECTED_FAILS" ]; then
     XFAIL="--xfail-list $INSTALL/$DEQP_EXPECTED_FAILS"
 fi

 set +e

 run_cts() {
     deqp=$1
     caselist=$2
     output=$3
     deqp-runner \
         --deqp $deqp \
         --output $output \
         --caselist $caselist \
         --exclude-list $INSTALL/$DEQP_SKIPS \
         $XFAIL \
         --job ${DEQP_PARALLEL:-1} \
 	--allow-flakes true \
 	$DEQP_RUNNER_OPTIONS \
         -- \
         $DEQP_OPTIONS
 }

 report_flakes() {
     if [ -z "$FLAKES_CHANNEL" ]; then
         return 0
     fi
     flakes=$1
     bot="$CI_RUNNER_DESCRIPTION-$CI_PIPELINE_ID"
     channel="$FLAKES_CHANNEL"
     (
     echo NICK $bot
     echo USER $bot unused unused :Gitlab CI Notifier
     sleep 10
     echo "JOIN $channel"
     sleep 1
     desc="Flakes detected in job: $CI_JOB_URL on $CI_RUNNER_DESCRIPTION"
     if [ -n "CI_MERGE_REQUEST_SOURCE_BRANCH_NAME" ]; then
         desc="$desc on branch $CI_MERGE_REQUEST_SOURCE_BRANCH_NAME ($CI_MERGE_REQUEST_TITLE)"
     fi
     echo "PRIVMSG $channel :$desc"
     for flake in `cat $flakes`; do
         echo "PRIVMSG $channel :$flake"
     done
     echo "PRIVMSG $channel :See $CI_JOB_URL/artifacts/browse/results/"
     echo "QUIT"
     ) | nc irc.freenode.net 6667 > /dev/null

 }

 extract_xml_result() {
     testcase=$1
     shift 1
     qpas=$*
     start="#beginTestCaseResult $testcase"
     for qpa in $qpas; do
         while IFS= read -r line; do
             if [ "$line" = "$start" ]; then
                 dst="$testcase.qpa"
                 echo "#beginSession" > $dst
                 echo $line >> $dst
                 while IFS= read -r line; do
                     if [ "$line" = "#endTestCaseResult" ]; then
                         echo $line >> $dst
                         echo "#endSession" >> $dst
                         /deqp/executor/testlog-to-xml $dst "$RESULTS/$testcase.xml"
                         # copy the stylesheets here so they only end up in artifacts
                         # if we have one or more result xml in artifacts
                         cp /deqp/testlog.css "$RESULTS/"
                         cp /deqp/testlog.xsl "$RESULTS/"
                         return 0
                     fi
                     echo $line >> $dst
                 done
                 return 1
             fi
         done < $qpa
     done
 }

 extract_xml_results() {
     qpas=$*
     while IFS= read -r testcase; do
         testcase=${testcase%,*}
         extract_xml_result $testcase $qpas
     done
 }

 # Generate junit results
 generate_junit() {
     results=$1
     echo "<?xml version=\"1.0\" encoding=\"utf-8\"?>"
     echo "<testsuites>"
     echo "<testsuite name=\"$DEQP_VER-$CI_NODE_INDEX\">"
     while read line; do
         testcase=${line%,*}
         result=${line#*,}
         # avoid counting Skip's in the # of tests:
         if [ "$result" = "Skip" ]; then
             continue;
         fi
         echo "<testcase name=\"$testcase\">"
         if [ "$result" != "Pass" ]; then
             echo "<failure type=\"$result\">"
             echo "$result: See $CI_JOB_URL/artifacts/results/$testcase.xml"
             echo "</failure>"
         fi
         echo "</testcase>"
     done < $results
     echo "</testsuite>"
     echo "</testsuites>"
 }

 # wrapper to supress +x to avoid spamming the log
 quiet() {
     set +x
     "$@"
     set -x
 }

 run_cts $DEQP /tmp/case-list.txt $RESULTS/cts-runner-results.txt
 DEQP_EXITCODE=$?

 quiet generate_junit $RESULTS/cts-runner-results.txt > $RESULTS/results.xml

 if [ $DEQP_EXITCODE -ne 0 ]; then
     # preserve caselist files in case of failures:
     cp /tmp/deqp_runner.*.txt $RESULTS/
     echo "Some unexpected results found (see cts-runner-results.txt in artifacts for full results):"
     cat $RESULTS/cts-runner-results.txt | \
         grep -v ",Pass" | \
         grep -v ",Skip" | \
         grep -v ",ExpectedFail" > \
         $RESULTS/cts-runner-unexpected-results.txt
     head -n 50 $RESULTS/cts-runner-unexpected-results.txt

     if [ -z "$DEQP_NO_SAVE_RESULTS" ]; then
         # Save the logs for up to the first 50 unexpected results:
         head -n 50 $RESULTS/cts-runner-unexpected-results.txt | quiet extract_xml_results /tmp/*.qpa
     fi

     count=`cat $RESULTS/cts-runner-unexpected-results.txt | wc -l`

     # Re-run fails to detect flakes.  But use a small threshold, if
     # something was fundamentally broken, we don't want to re-run
     # the entire caselist
 else
     cat $RESULTS/cts-runner-results.txt | \
         grep ",Flake" > \
         $RESULTS/cts-runner-flakes.txt

     count=`cat $RESULTS/cts-runner-flakes.txt | wc -l`
     if [ $count -gt 0 ]; then
         echo "Some flakes found (see cts-runner-flakes.txt in artifacts for full results):"
         head -n 50 $RESULTS/cts-runner-flakes.txt

         if [ -z "$DEQP_NO_SAVE_RESULTS" ]; then
             # Save the logs for up to the first 50 flakes:
             head -n 50 $RESULTS/cts-runner-flakes.txt | quiet extract_xml_results /tmp/*.qpa
         fi

         # Report the flakes to IRC channel for monitoring (if configured):
         quiet report_flakes $RESULTS/cts-runner-flakes.txt
     else
         # no flakes, so clean-up:
         rm $RESULTS/cts-runner-flakes.txt
     fi
 fi

 exit $DEQP_EXITCODE
	#!/bin/sh

	set -ex

	DEQP_OPTIONS="--deqp-surface-width=256 --deqp-surface-height=256"
	DEQP_OPTIONS="$DEQP_OPTIONS --deqp-surface-type=pbuffer"
	DEQP_OPTIONS="$DEQP_OPTIONS --deqp-gl-config-name=rgba8888d24s8ms0"
	DEQP_OPTIONS="$DEQP_OPTIONS --deqp-visibility=hidden"

	# It would be nice to be able to enable the watchdog, so that hangs in a test
	# don't need to wait the full hour for the run to time out. However, some
	# shaders end up taking long enough to compile
	# (dEQP-GLES31.functional.ubo.random.all_per_block_buffers.20 for example)
	# that they'll sporadically trigger the watchdog.
	#DEQP_OPTIONS="$DEQP_OPTIONS --deqp-watchdog=enable"

	if [ -z "$DEQP_VER" ]; then
	echo 'DEQP_VER must be set to something like "gles2", "gles31" or "vk" for the test run'
	exit 1
	fi

	if [ "$DEQP_VER" = "vk" ]; then
	if [ -z "$VK_DRIVER" ]; then
	echo 'VK_DRIVER must be to something like "radeon" or "intel" for the test run'
	exit 1
	fi
	fi

	if [ -z "$DEQP_SKIPS" ]; then
	echo 'DEQP_SKIPS must be set to something like "deqp-default-skips.txt"'
	exit 1
	fi

	INSTALL=`pwd`/install

	# Set up the driver environment.
	export LD_LIBRARY_PATH=`pwd`/install/lib/
	export EGL_PLATFORM=surfaceless
	export VK_ICD_FILENAMES=`pwd`/install/share/vulkan/icd.d/"$VK_DRIVER"_icd.x86_64.json

	# the runner was failing to look for libkms in /usr/local/lib for some reason
	# I never figured out.
	export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib

	RESULTS=`pwd`/results
	mkdir -p $RESULTS

	# Generate test case list file.
	if [ "$DEQP_VER" = "vk" ]; then
	cp /deqp/mustpass/vk-master.txt /tmp/case-list.txt
	DEQP=/deqp/external/vulkancts/modules/vulkan/deqp-vk
	else
	cp /deqp/mustpass/$DEQP_VER-master.txt /tmp/case-list.txt
	DEQP=/deqp/modules/$DEQP_VER/deqp-$DEQP_VER
	fi

	# If the job is parallel, take the corresponding fraction of the caselist.
	# Note: N~M is a gnu sed extension to match every nth line (first line is #1).
	if [ -n "$CI_NODE_INDEX" ]; then
	sed -ni $CI_NODE_INDEX~$CI_NODE_TOTAL"p" /tmp/case-list.txt
	fi

	if [ ! -s /tmp/case-list.txt ]; then
	echo "Caselist generation failed"
	exit 1
	fi

	if [ -n "$DEQP_EXPECTED_FAILS" ]; then
	XFAIL="--xfail-list $INSTALL/$DEQP_EXPECTED_FAILS"
	fi

	set +e

	run_cts() {
	deqp=$1
	caselist=$2
	output=$3
	deqp-runner \
	--deqp $deqp \
	--output $output \
	--caselist $caselist \
	--exclude-list $INSTALL/$DEQP_SKIPS \
	$XFAIL \
	--job ${DEQP_PARALLEL:-1} \
	--allow-flakes true \
	$DEQP_RUNNER_OPTIONS \
	-- \
	$DEQP_OPTIONS
	}

	report_flakes() {
	if [ -z "$FLAKES_CHANNEL" ]; then
	return 0
	fi
	flakes=$1
	bot="$CI_RUNNER_DESCRIPTION-$CI_PIPELINE_ID"
	channel="$FLAKES_CHANNEL"
	(
	echo NICK $bot
	echo USER $bot unused unused :Gitlab CI Notifier
	sleep 10
	echo "JOIN $channel"
	sleep 1
	desc="Flakes detected in job: $CI_JOB_URL on $CI_RUNNER_DESCRIPTION"
	if [ -n "CI_MERGE_REQUEST_SOURCE_BRANCH_NAME" ]; then
	desc="$desc on branch $CI_MERGE_REQUEST_SOURCE_BRANCH_NAME ($CI_MERGE_REQUEST_TITLE)"
	fi
	echo "PRIVMSG $channel :$desc"
	for flake in `cat $flakes`; do
	echo "PRIVMSG $channel :$flake"
	done
	echo "PRIVMSG $channel :See $CI_JOB_URL/artifacts/browse/results/"
	echo "QUIT"
	) \| nc irc.freenode.net 6667 > /dev/null

	}

	extract_xml_result() {
	testcase=$1
	shift 1
	qpas=$*
	start="#beginTestCaseResult $testcase"
	for qpa in $qpas; do
	while IFS= read -r line; do
	if [ "$line" = "$start" ]; then
	dst="$testcase.qpa"
	echo "#beginSession" > $dst
	echo $line >> $dst
	while IFS= read -r line; do
	if [ "$line" = "#endTestCaseResult" ]; then
	echo $line >> $dst
	echo "#endSession" >> $dst
	/deqp/executor/testlog-to-xml $dst "$RESULTS/$testcase.xml"
	# copy the stylesheets here so they only end up in artifacts
	# if we have one or more result xml in artifacts
	cp /deqp/testlog.css "$RESULTS/"
	cp /deqp/testlog.xsl "$RESULTS/"
	return 0
	fi
	echo $line >> $dst
	done
	return 1
	fi
	done < $qpa
	done
	}

	extract_xml_results() {
	qpas=$*
	while IFS= read -r testcase; do
	testcase=${testcase%,*}
	extract_xml_result $testcase $qpas
	done
	}

	# Generate junit results
	generate_junit() {
	results=$1
	echo "<?xml version=\"1.0\" encoding=\"utf-8\"?>"
	echo "<testsuites>"
	echo "<testsuite name=\"$DEQP_VER-$CI_NODE_INDEX\">"
	while read line; do
	testcase=${line%,*}
	result=${line#*,}
	# avoid counting Skip's in the # of tests:
	if [ "$result" = "Skip" ]; then
	continue;
	fi
	echo "<testcase name=\"$testcase\">"
	if [ "$result" != "Pass" ]; then
	echo "<failure type=\"$result\">"
	echo "$result: See $CI_JOB_URL/artifacts/results/$testcase.xml"
	echo "</failure>"
	fi
	echo "</testcase>"
	done < $results
	echo "</testsuite>"
	echo "</testsuites>"
	}

	# wrapper to supress +x to avoid spamming the log
	quiet() {
	set +x
	"$@"
	set -x
	}

	run_cts $DEQP /tmp/case-list.txt $RESULTS/cts-runner-results.txt
	DEQP_EXITCODE=$?

	quiet generate_junit $RESULTS/cts-runner-results.txt > $RESULTS/results.xml

	if [ $DEQP_EXITCODE -ne 0 ]; then
	# preserve caselist files in case of failures:
	cp /tmp/deqp_runner.*.txt $RESULTS/
	echo "Some unexpected results found (see cts-runner-results.txt in artifacts for full results):"
	cat $RESULTS/cts-runner-results.txt \| \
	grep -v ",Pass" \| \
	grep -v ",Skip" \| \
	grep -v ",ExpectedFail" > \
	$RESULTS/cts-runner-unexpected-results.txt
	head -n 50 $RESULTS/cts-runner-unexpected-results.txt

	if [ -z "$DEQP_NO_SAVE_RESULTS" ]; then
	# Save the logs for up to the first 50 unexpected results:
	head -n 50 $RESULTS/cts-runner-unexpected-results.txt \| quiet extract_xml_results /tmp/*.qpa
	fi

	count=`cat $RESULTS/cts-runner-unexpected-results.txt \| wc -l`

	# Re-run fails to detect flakes. But use a small threshold, if
	# something was fundamentally broken, we don't want to re-run
	# the entire caselist
	else
	cat $RESULTS/cts-runner-results.txt \| \
	grep ",Flake" > \
	$RESULTS/cts-runner-flakes.txt

	count=`cat $RESULTS/cts-runner-flakes.txt \| wc -l`
	if [ $count -gt 0 ]; then
	echo "Some flakes found (see cts-runner-flakes.txt in artifacts for full results):"
	head -n 50 $RESULTS/cts-runner-flakes.txt

	if [ -z "$DEQP_NO_SAVE_RESULTS" ]; then
	# Save the logs for up to the first 50 flakes:
	head -n 50 $RESULTS/cts-runner-flakes.txt \| quiet extract_xml_results /tmp/*.qpa
	fi

	# Report the flakes to IRC channel for monitoring (if configured):
	quiet report_flakes $RESULTS/cts-runner-flakes.txt
	else
	# no flakes, so clean-up:
	rm $RESULTS/cts-runner-flakes.txt
	fi
	fi

	exit $DEQP_EXITCODE