| 2006-04-01 Paul D. Smith <psmith@gnu.org> |
| |
| Version 3.81 released. |
| |
| * NEWS: Updated for 3.81. |
| |
| * README.cvs: Mention that vpath builds are not supported out of |
| CVS. Fixes Savannah bug #16236. |
| Remove update of make.texi from the list of things to do; we use |
| version.texi now. |
| |
| 2006-03-26 Paul D. Smith <psmith@gnu.org> |
| |
| * doc/make.texi: Clean up licensing. Use @copying and version.texi |
| support from automake, as described in the Texinfo manual. |
| |
| 2006-03-25 Eli Zaretskii <eliz@gnu.org> |
| |
| * implicit.c (pattern_search) [HAVE_DOS_PATHS]: Don't compare b |
| with lastslash, since the latter points to filename, not to |
| target. |
| * job.c (construct_command_argv_internal) [HAVE_DOS_PATHS]: |
| Declare and define sh_chars_sh[]. |
| |
| 2006-03-23 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in: Look for build.sh.in in $srcdir so it will be |
| built for remote configurations as well. |
| |
| * Makefile.am: Make sure to clean up build.sh during distclean. |
| Fixes Savannah bug #16166. |
| |
| * misc.c (log_access): Takes a const char *. |
| * function.c (fold_newlines): Takes an unsigned int *. |
| Both fixes for Savannah bug #16170. |
| |
| 2006-03-22 Boris Kolpackov <boris@kolpackov.net> |
| |
| * implicit.c (pattern_search): Call set_file_variables only |
| if we have prerequisites that need second expansion. Fixes |
| Savannah bug #16140. |
| |
| 2006-03-19 Paul D. Smith <psmith@gnu.org> |
| |
| * remake.c (update_file): Add alloca(0) to clean up alloca'd |
| memory on hosts that don't support it directly. |
| |
| * README.cvs: Add information on steps for making a release (to |
| make sure I don't forget any). |
| |
| * main.c (clean_jobserver): Move jobserver cleanup code into a new |
| function. |
| (die): Cleanup code was removed from here; call the new function. |
| (main): If we are re-execing, clean up the jobserver first so we |
| don't leak file descriptors. |
| Fix bug reported by Craig Fithian <craig.fithian@citigroup.com>. |
| |
| 2006-03-17 Paul D. Smith <psmith@gnu.org> |
| |
| * maintMakefile (do-po-update): Rewrite this rule to clean up and |
| allow multiple concurrent runs. |
| Patch from Joseph Myers <joseph@codesourcery.com> |
| |
| 2006-03-17 Boris Kolpackov <boris@kolpackov.net> |
| |
| * dep.h (struct dep): Add the stem field. |
| * misc.c (alloc_dep, free_dep): New functions. |
| (copy_dep_chain): Copy stem. |
| (free_dep_chain): Use free_dep. |
| * read.c (record_files): Store stem in the dependency line. |
| * file.c (expand_deps): Use stem stored in the dependency line. Use |
| free_dep_chain instead of free_ns_chain. |
| * implicit.c (pattern_search): Use alloc_dep and free_dep. |
| * read.c (read_all_makefiles, eval_makefile, eval): Ditto. |
| * main.c (main, handle_non_switch_argument): Ditto. |
| * remake.c (check_dep): Ditto. |
| * rule.c (convert_suffix_rule, freerule): Ditto. |
| |
| 2006-03-14 Paul D. Smith <psmith@gnu.org> |
| |
| * expand.c (variable_append): Instead of appending everything then |
| expanding the result, we expand (or not, if it's simple) each part |
| as we add it. |
| (allocated_variable_append): Don't expand the final result. |
| Fixes Savannah bug #15913. |
| |
| 2006-03-09 Paul Smith <psmith@gnu.org> |
| |
| * remake.c (update_file_1): Revert the change of 3 Jan 2006 which |
| listed non-existent files as changed. Turns out there's a bug in |
| the Linux kernel builds which means that this change causes |
| everything to rebuild every time. We will re-introduce this fix |
| in the next release, to give them time to fix their build system. |
| Fixes Savannah bug #16002. |
| Introduces Savannah bug #16051. |
| |
| * implicit.c (pattern_search) [DOS_PATHS]: Look for DOS paths if |
| we *don't* find UNIX "/". |
| Reported by David Ergo <david.ergo@alterface.com> |
| |
| 2006-03-04 Eli Zaretskii <eliz@gnu.org> |
| |
| * variable.c (do_variable_definition) [WINDOWS32]: Call the shell |
| locator function find_and_set_default_shell if SHELL came from the |
| command line. |
| |
| 2006-02-20 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (merge_variable_set_lists): It's legal for *setlist0 |
| to be null; don't core in that case. |
| |
| 2006-02-19 Paul D. Smith <psmith@gnu.org> |
| |
| * commands.c (set_file_variables): Realloc, not malloc, the static |
| string values to avoid memory leaks. |
| |
| * expand.c (recursively_expand_for_file): Only set reading_file to |
| an initialized value. |
| |
| * implicit.c (pattern_search): We need to make a copy of the stem |
| if we get it from an intermediate dep, since those get freed. |
| |
| * file.c (lookup_file) [VMS]: Don't lowercase special targets that |
| begin with ".". |
| (enter_file) [VMS]: Ditto. |
| Patch provided by Hartmut Becker <Hartmut.Becker@hp.com>. |
| |
| 2006-02-24 Eli Zaretskii <eliz@gnu.org> |
| |
| * job.c (construct_command_argv_internal): Fix last change. |
| |
| * w32/subproc/sub_proc.c (process_pipe_io): Make dwStdin, |
| dwStdout, and dwStderr unsigned int: avoids compiler warnings in |
| the calls to _beginthreadex. |
| |
| * expand.c (recursively_expand_for_file): Initialize `save' to |
| prevent compiler warnings. |
| |
| 2006-02-18 Eli Zaretskii <eliz@gnu.org> |
| |
| * job.c (construct_command_argv_internal): Don't create a temporary |
| script/batch file if we are under -n. Call _setmode to switch the |
| script file stream to text mode. |
| |
| 2006-02-17 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (merge_variable_set_lists): Don't try to merge the |
| global_setlist. Not only is this useless, but it can lead to |
| circularities in the linked list, if global_setlist->next in one |
| list gets set to point to another list which also ends in |
| global_setlist. |
| Fixes Savannah bug #15757. |
| |
| 2006-02-15 Paul D. Smith <psmith@gnu.org> |
| |
| Fix for Savannah bug #106. |
| |
| * expand.c (expanding_var): Keep track of which variable we're |
| expanding. If no variable is being expanded, it's the same as |
| reading_file. |
| * make.h (expanding_var): Declare it. |
| * expand.c (recursively_expand_for_file): Set expanding_var to the |
| current variable we're expanding, unless there's no file info in |
| it (could happen if it comes from the command line or a default |
| variable). Restore it before we exit. |
| * expand.c (variable_expand_string): Use the expanding_var file |
| info instead of the reading_file info. |
| * function.c (check_numeric): Ditto. |
| (func_word): Ditto. |
| (func_wordlist): Ditto. |
| (func_error): Ditto. |
| (expand_builtin_function): Ditto. |
| (handle_function): Ditto. |
| |
| 2006-02-14 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (eval): Even if the included filenames expands to the |
| empty string we still need to free the allocated buffer. |
| |
| * implicit.c (pattern_search): If we allocated a variable set for |
| an impossible file, free it. |
| * variable.c (free_variable_set): New function. |
| * variable.h: Declare it. |
| |
| * read.c (read_all_makefiles): Makefile names are kept in the |
| strcache, so there's never any need to alloc/free them. |
| (eval): Ditto. |
| |
| * main.c (main): Add "archives" to the .FEATURES variable if |
| archive support is enabled. |
| * doc/make.texi (Special Variables): Document it. |
| |
| 2006-02-13 Paul D. Smith <psmith@gnu.org> |
| |
| * implicit.c (pattern_search): Add checking for DOS pathnames to |
| the pattern rule target LASTSLASH manipulation. |
| Fixes Savannah bug #11183. |
| |
| 2006-02-11 Paul D. Smith <psmith@gnu.org> |
| |
| * (ALL FILES): Updated copyright and license notices. |
| |
| 2006-02-10 Paul D. Smith <psmith@gnu.org> |
| |
| A new internal capability: the string cache is a read-only cache |
| of strings, with a hash table interface for fast lookup. Nothing |
| in the cache will ever be freed, so there's no need for reference |
| counting, etc. This is the beginning of a full solution for |
| Savannah bug #15182, but for now we only store makefile names here. |
| |
| * strcache.c: New file. Implement a read-only string cache. |
| * make.h: Add prototypes for new functions. |
| * main.c (initialize_global_hash_tables): Initialize the string cache. |
| (print_data_base): Print string cache stats. |
| * read.c (eval_makefile): Use the string cache to store makefile |
| names. Rewrite the string allocation to be sure we free everything. |
| |
| 2006-02-10 Eli Zaretskii <eliz@gnu.org> |
| |
| * dir.c (dir_contents_file_exists_p): Don't opendir if the |
| directory time stamp didn't change, except on FAT filesystems. |
| Suggested by J. David Bryan <jdbryan@acm.org>. |
| |
| 2006-02-09 Paul D. Smith <psmith@gnu.org> |
| |
| * function.c (func_or): Implement a short-circuiting OR function. |
| (func_and): Implement a short-circuiting AND function. |
| (function_table_init): Update the table with the new functions. |
| * doc/make.texi (Conditional Functions): Changed the "if" section |
| to one on general conditional functions. Added documentation for |
| $(and ...) and $(or ...) functions. |
| * NEWS: Note new $(and ...) and $(or ...) functions. |
| |
| 2006-02-08 Boris Kolpackov <boris@kolpackov.net> |
| |
| * job.h (struct child): Add the dontcare bitfield. |
| * job.c (new_job): Cache dontcare flag. |
| * job.c (reap_children): Use cached dontcare flag instead of the |
| one in struct file. Fixes Savannah bug #15641. |
| |
| 2006-02-06 Paul D. Smith <psmith@gnu.org> |
| |
| * vpath.c (selective_vpath_search): If the file we find has a |
| timestamp from -o or -W, use that instead of the real time. |
| * remake.c (f_mtime): If the mtime is a special token from -o or |
| -W, don't overwrite it with the real mtime. |
| Fixes Savannah bug #15341. |
| |
| Updates from Markus Mauhart <qwe123@chello.at>: |
| |
| * w32/subproc/sub_proc.c (process_begin): Remove no-op tests. |
| (process_signal, process_last_err, process_exit_code): Manage |
| invalid handle values. |
| (process_{outbuf,errbuf,outcnt,errcnt,pipes}): Unused and don't |
| manage invalid handles; remove them. |
| * job.c (start_job_command) [WINDOWS32]: Jump out on error. |
| * config.h.W32.template [WINDOWS32]: Set flags for Windows builds. |
| * README.cvs: Updates for building from CVS. |
| |
| 2006-02-05 Paul D. Smith <psmith@gnu.org> |
| |
| * file.c (enter_file): Keep track of the last double_colon entry, |
| to avoid walking the list every time we want to add a new one. |
| Fixes Savannah bug #15533. |
| * filedef.h (struct file): Add a new LAST pointer. |
| |
| * dir.c (directory_contents_hash_cmp): Don't use subtraction to do |
| the comparison. For 64-bits systems the result of the subtraction |
| might not fit into an int. Use comparison instead. |
| Fixes Savannah bug #15534. |
| |
| * doc/make.texi: Update the chapter on writing commands to reflect |
| the changes made in 3.81 for backslash/newline and SHELL handling. |
| |
| 2006-02-01 Paul D. Smith <psmith@gnu.org> |
| |
| * dir.c (dir_contents_file_exists_p) [WINDOWS32]: Make sure |
| variable st is not used when it's not initialized. |
| Patch from Eli Zaretskii <eliz@gnu.org>. |
| |
| 2006-01-31 Paul D. Smith <psmith@gnu.org> |
| |
| * README.W32.template: Applied patch #4785 from |
| Markus Mauhart <qwe123@chello.at>. |
| * README.cvs: Applied patch #4786 from |
| Markus Mauhart <qwe123@chello.at>. |
| * make_msvc_net2003.vcproj [WINDOWS32]: New version from |
| J. Grant <jg@jguk.org>. |
| |
| * main.c: Update the copyright year in the version output. |
| * prepare_w32.bat: Remove this file from the distribution. |
| |
| 2006-01-21 Eli Zaretskii <eliz@gnu.org> |
| |
| * remake.c (update_goal_chain): Set g->changed instead of |
| incrementing it, as it is only 8-bit wide, and could overflow if |
| many commands got started in update_file. |
| |
| * w32/include/sub_proc.h: Add a prototype for process_used_slots. |
| |
| * w32/subproc/sub_proc.c: Change dimension of proc_array[] to |
| MAXIMUM_WAIT_OBJECTS. |
| (process_wait_for_any_private): Change dimension of handles[] |
| array to MAXIMUM_WAIT_OBJECTS. |
| (process_used_slots): New function. |
| (process_register): Don't register more processes than the |
| available number of slots. |
| (process_easy): Don't start new processes if all slots are used up. |
| |
| * job.c (load_too_high, start_waiting_jobs) [WINDOWS32]: If there |
| are already more children than sub_proc.c can handle, behave as if |
| the load were too high. |
| (start_job_command): Fix a typo in error message when process_easy |
| fails. |
| |
| 2006-01-14 Eli Zaretskii <eliz@gnu.org> |
| |
| * main.c (main) [WINDOWS32]: Don't refuse to run with -jN, even if |
| the shell is not sh.exe. |
| |
| * job.c (create_batch_file): Renamed from create_batch_filename; |
| all callers changed. Don't close the temporary file; return its |
| file descriptor instead. New arg FD allows to return the file |
| descriptor. |
| (construct_command_argv_internal): Use _fdopen instead of fopen to |
| open the batch file. |
| |
| 2006-01-04 Paul D. Smith <psmith@gnu.org> |
| |
| * readme.vms: Updates for case-insensitive VMS file systems from |
| Hartmut Becker <Hartmut.Becker@hp.com>. |
| * dir.c (vms_hash): Ditto. |
| * vmsify.c (copyto): Ditto. |
| * vmsfunctions.c (readdir): Ditto. |
| |
| * make.1: Add a section on the exit codes for make. |
| |
| * doc/make.texi: A number of minor updates to the documentation. |
| |
| 2006-01-03 Paul D. Smith <psmith@gnu.org> |
| |
| * remake.c (update_file_1): Mark a prerequisite changed if it |
| doesn't exist. |
| |
| * read.c (eval): Be sure to strip off trailing whitespace from the |
| prerequisites list properly. Also, initialize all fields in |
| struct dep when creating a new one. |
| |
| 2005-12-28 Paul D. Smith <psmith@gnu.org> |
| |
| * config.h.W32.template [WINDOWS32]: Add in some pragmas to |
| disable warnings for MSC. |
| Patch by Rob Tulloh <rtulloh@yahoo.com>. |
| |
| 2005-12-17 Eli Zaretskii <eliz@gnu.org> |
| |
| * doc/make.texi (Execution): Add a footnote about changes in |
| handling of backslash-newline sequences. Mention the differences |
| on MS-DOS and MS-Windows. |
| |
| * NEWS: More details about building the MinGW port and a pointer |
| to README.W32. Fix the section name that describes the new |
| backward-incompatible processing of backslash-newline sequences. |
| The special processing of SHELL set to "cmd" is only relevant to |
| MS-Windows, not MS-DOS. |
| |
| 2005-12-17 Eli Zaretskii <eliz@gnu.org> |
| |
| * main.c (handle_runtime_exceptions): Cast exrec->ExceptionAddress |
| to DWORD, to avoid compiler warnings. |
| * job.c (exec_command): Cast hWaitPID and hPID to DWORD, and |
| use %ld in format, to avoid compiler warnings. |
| |
| * doc/make.texi (Special Targets): Fix a typo. |
| (Appending): Fix cross-reference to Setting. |
| (Special Variables, Secondary Expansion, File Name Functions) |
| (Flavor Function, Pattern Match, Quick Reference): Ensure two |
| periods after a sentence. |
| (Execution): Add @: after "e.g.". |
| (Environment): Fix punctuation. |
| (Target-specific, Call Function, Quick Reference): Add @: after "etc." |
| (Shell Function, Target-specific): Add @: after "vs." |
| |
| 2005-12-14 Boris Kolpackov <boris@kolpackov.net> |
| |
| * read.c (record_target_var): Initialize variable's export field |
| with v_default instead of leaving it "initialized" by whatever |
| garbage happened to be on the heap. |
| |
| 2005-12-12 Paul D. Smith <psmith@gnu.org> |
| |
| * make.1: Fix some display errors and document all existing options. |
| Patch provided by Mike Frysinger <vapier@gentoo.org>. |
| |
| 2005-12-11 Paul D. Smith <psmith@gnu.org> |
| |
| * implicit.c (pattern_search): If 2nd expansion is not set for |
| this implicit rule, replace the pattern with the stem directly, |
| and don't re-expand the variable list. Along with the other |
| .SECONDEXPANSION changes below, fixes bug #13781. |
| |
| 2005-12-09 Boris Kolpackov <boris@kolpackov.net> |
| |
| * implicit.c (pattern_search): Mark other files that this rule |
| builds as targets so that they are not treated as intermediates |
| by the pattern rule search algorithm. Fixes bug #13022. |
| |
| 2005-12-07 Boris Kolpackov <boris@kolpackov.net> |
| |
| * remake.c (notice_finished_file): Propagate the change of |
| modification time to all the double-colon entries only if |
| it is the last one to be updated. Fixes bug #14334. |
| |
| 2005-11-17 Boris Kolpackov <boris@kolpackov.net> |
| |
| * function.c (func_flavor): Implement the flavor function which |
| returns the flavor of a variable. |
| * doc/make.texi (Functions for Transforming Text): Document it. |
| * NEWS: Add it to the list of new functions. |
| |
| 2005-11-14 Boris Kolpackov <boris@kolpackov.net> |
| |
| * read.c (construct_include_path): Set the .INCLUDE_DIRS special |
| variable. |
| * doc/make.texi (Special Variables): Document .INCLUDE_DIRS. |
| * NEWS: Add .INCLUDE_DIRS to the list of new special variables. |
| |
| 2005-10-26 Paul Smith <psmith@gnu.org> |
| |
| * read.c (record_files): Don't set deps flags if there are no deps. |
| * maintMakefile: We only need to build the templates when we are |
| creating a distribution, so don't do it for "all". |
| |
| 2005-10-24 Paul D. Smith <psmith@gnu.org> |
| |
| Make secondary expansion optional: its enabled by declaring the |
| special target .SECONDEXPANSION. |
| |
| * NEWS: Update information on second expansion capabilities. |
| * doc/make.texi (Secondary Expansion): Document the |
| .SECONDEXPANSION special target and its behavior. |
| * dep.h (struct dep): Add a flag STATICPATTERN, set to true if the |
| prerequisite list was found in a static pattern rule. |
| (free_dep_chain): Declare a prototype. |
| * file.c (parse_prereqs): New function: break out some complexity |
| from expand_deps(). |
| (expand_deps): If we aren't doing second expansion, replace % with |
| the stem for static pattern rules. Call the new function. |
| * filedef.h (parse_prereqs): Declare a prototype. |
| * implicit.c (pattern_search): Initialize the new staticpattern |
| field. |
| * main.c (second_expansion): Declare a global variable to remember |
| if the special target has been seen. Initialize the new |
| staticpattern field for prerequisites. |
| * make.h: Extern for second_expansion. |
| * misc.c (free_dep_chain): New function: frees a struct dep list. |
| * read.c (read_all_makefiles): Initialize the staticpattern field. |
| (eval_makefile): Ditto. |
| (record_files): Check for the .SECONDEXPANSION target and set |
| second_expansion global if it's found. |
| Use the new free_dep_chain() instead of doing it by hand. |
| Set the staticpattern field for prereqs of static pattern targets. |
| |
| 2005-10-16 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (main): Set CURDIR to be a file variable instead of a |
| default, so that values of CURDIR inherited from the environment |
| won't override the make value. |
| |
| 2005-09-26 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c (construct_command_argv_internal): If the line is empty |
| remember to free the temporary argv strings. |
| Fixes bug # 14527. |
| |
| 2005-09-16 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c (start_job_command): The noerror flag is a boolean (single |
| bit); set it appropriately. |
| Reported by Mark Eichin <eichin@metacarta.com> |
| |
| 2005-08-29 Paul D. Smith <psmith@gnu.org> |
| |
| * function.c (func_error): On Windows, output from $(info ...) |
| seems to come in the wrong order. Try to force it with fflush(). |
| |
| 2005-08-10 Boris Kolpackov <boris@kolpackov.net> |
| |
| * read.c (record_files): Move code that sets stem for static |
| pattern rules out of the if (!two_colon) condition so it is |
| also executed for two-colon rules. Fixes Savannah bug #13881. |
| |
| 2005-08-08 Paul D. Smith <psmith@gnu.org> |
| |
| * make.h: Don't test that __STDC__ is non-0. Some compilers |
| (Windows for example) set it to 0 to denote "ISO C + extensions". |
| Fixes bug # 13594. |
| |
| 2005-08-07 Paul D. Smith <psmith@gnu.org> |
| |
| * w32/pathstuff.c (getcwd_fs): Fix warning about assignment in a |
| conditional (slightly different version of a fix from Eli). |
| |
| Fix a bug reported by Michael Matz <matz@suse.de>: patch included. |
| If make is running in parallel without -k and two jobs die in a |
| row, but not too close to each other, then make will quit without |
| waiting for the rest of the jobs to die. |
| |
| * main.c (die): Don't reset err before calling reap_children() the |
| second time: we still want it to be in the error condition. |
| * job.c (reap_children): Use a static variable, rather than err, |
| to control whether or not the error message should be printed. |
| |
| 2005-08-06 Eli Zaretskii <eliz@gnu.org> |
| |
| * w32/subproc/sub_proc.c: Include signal.h. |
| (process_pipe_io, process_file_io): Pass a pointer to a local |
| DWORD variable to GetExitCodeProcess. If the exit code is |
| CONTROL_C_EXIT, put SIGINT into pproc->signal. |
| |
| * job.c [WINDOWS32]: Include windows.h. |
| (main_thread) [WINDOWS32]: New global variable. |
| (reap_children) [WINDOWS32]: Get the handle for the main thread |
| and store it in main_thread. |
| |
| * commands.c [WINDOWS32]: Include windows.h and w32err.h. |
| (fatal_error_signal) [WINDOWS32]: Suspend the main thread before |
| doing anything else. When we are done, close the main thread |
| handle and exit with status 130. |
| |
| 2005-07-30 Eli Zaretskii <eliz@gnu.org> |
| |
| * w32/subproc/sub_proc.c (process_begin): Don't pass a NULL |
| pointer to fprintf. |
| |
| * main.c (find_and_set_default_shell): If found a DOSish shell, |
| set sh_found and the value of default_shell, and report the |
| findings in debug mode. |
| |
| * job.c (construct_command_argv_internal): Check unixy_shell, not |
| no_default_sh_exe, to decide whether to use Unixy or DOSish |
| builtin commands. |
| |
| * README.W32: Update with info about the MinGW build. |
| |
| * build_w32.bat: Support MinGW. |
| |
| * w32/subproc/build.bat: Likewise. |
| |
| * w32/subproc/sub_proc.c (process_easy): Fix format strings for |
| printing DWORD args. |
| |
| * function.c (windows32_openpipe): Fix format strings for printing |
| DWORD args. |
| |
| * job.c (reap_children) [WINDOWS32]: Don't declare 'status' and |
| 'reap_mode'. |
| (start_job_command): Fix format string for printing the result of |
| process_easy. |
| (start_job_command) [WINDOWS32]: Do not define. |
| (exec_command): Fix format string for printing HANDLE args. |
| |
| * main.c (handle_runtime_exceptions): Fix sprintf format strings |
| to avoid compiler warnings. |
| (open_tmpfile): Declare fd only if HAVE_FDOPEN is defined. |
| (Note: some of these fixes were submitted independently by J. Grant) |
| |
| 2005-07-30 J. Grant <jg@jguk.org> |
| |
| * prepare_w32.bat: Copy config.h.w32 to config.h if not exist. |
| * make_msvc_net2003.vcproj, make_msvc_net2003.sln: MSVC Project files. |
| * Makefile.am (EXTRA_DIST): Add MSVC Project files. |
| |
| 2005-07-15 Paul Smith <psmith@gnu.org> |
| |
| * job.c (construct_command_argv_internal) [DOS,WINDOWS32,OS/2]: If |
| we don't have a POSIX shell, then revert to the old |
| backslash-newline behavior (where they are stripped). |
| Fixes bug #13665. |
| |
| 2005-07-08 Paul D. Smith <psmith@gnu.org> |
| |
| * config.h.W32.template: Reorder to match the standard config.h, |
| for easier comparisons. |
| From J. Grant <jg@jguk.org> |
| |
| * maintMakefile: Remove .dep_segment before overwriting it, in |
| case it's not writable or noclobber is set. |
| * expand.c (variable_expand_string): Cast result of pointer |
| arithmetic to avoid a warning. |
| * main.c (switches): Add full-fledged final initializer. |
| |
| 2005-07-06 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in: IRIX has _sys_siglist. Tru64 UNIX has __sys_siglist. |
| * signame.c (strsignal): If we found _sys_siglist[] or |
| __sys_siglist[] use those instead of sys_siglist[]. |
| From Albert Chin <china@thewrittenword.com> |
| |
| 2005-07-04 Paul D. Smith <psmith@gnu.org> |
| |
| * config.h-vms.template [VMS]: Latest VMS has its own glob() and |
| globfree(); set up to use the GNU versions. |
| From Martin Zinser <zinser@zinser.no-ip.info> |
| |
| 2005-07-03 Paul D. Smith <psmith@gnu.org> |
| |
| From J. Grant <jg@jguk.org>: |
| |
| * README.W32.template: Update the Windows and tested MSVC versions. |
| * NMakefile.template (CFLAGS_any): Change warning level from W3 to W4. |
| * w32/subproc/NMakefile (CFLAGS_any): Ditto. |
| * build_w32.bat: Ditto. |
| * w32/subproc/build.bat: Ditto. |
| |
| 2005-06-28 Paul D. Smith <psmith@gnu.org> |
| |
| * signame.c: HAVE_DECL_* macros are set to 0, not undef, if the |
| declaration was checked but not present. |
| |
| 2005-06-27 Paul D. Smith <psmith@gnu.org> |
| |
| * dir.c (find_directory): Change type of fs_serno/fs_flags/fs_len |
| to unsigned long. Fixes Savannah bug #13550. |
| |
| * w32/subproc/sub_proc.c: Remove (HANDLE) casts on lvalues. |
| (process_pipe_io): Initialize tStdin/tStdout/tStderr variables. |
| Fixes Savannah bug #13551. |
| |
| 2005-06-26 Paul D. Smith <psmith@gnu.org> |
| |
| * make.h: Fix bug in ANSI_STRING/strerror() handling; only define |
| it if ANSI_STRING is not set. |
| |
| 2005-06-25 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (eval): If no filenames are passed to any of the |
| "include" variants, don't print an error. |
| * doc/make.texi (Include): Document this. |
| Fixes Savannah bug #1761. |
| |
| * job.c (construct_command_argv_internal): Sanitize handling of |
| backslash/newline pairs according to POSIX: that is, keep the |
| backslash-newline in the command script, but remove a following |
| TAB character, if present. In the fast path, make sure that the |
| behavior matches what the shell would do both inside and outside |
| of quotes. In the slow path, quote the backslash and put a |
| literal newline in the string. |
| Fixes Savannah bug #1332. |
| * doc/make.texi (Execution): Document the new behavior and give |
| some examples. |
| * NEWS: Make a note of the new behavior. |
| |
| * make.h [WINDOWS32]: #include <direct.h>. |
| Fixes Savannah bug #13478. |
| |
| * remake.c (name_mtime): If the stat() of a file fails and the -L |
| option was given and the file is a symlink, take the best mtime of |
| the symlink we can get as the mtime of the file and don't fail. |
| Fixes Savannah bug #13280. |
| |
| * read.c (find_char_unquote): Accept a new argument IGNOREVARS. |
| If it's set, then don't stop on STOPCHARs or BLANKs if they're |
| inside a variable reference. Make this function static as it's |
| only used here. |
| (eval): Call find_char_unquote() with IGNOREVARS set when we're |
| parsing an unexpanded line looking for semicolons. |
| Fixes Savannah bug #1454. |
| * misc.c (remove_comments): Move this to read.c and make it static |
| as it's only used there. Call find_char_unquote() with new arg. |
| * make.h: Remove prototypes for find_char_unquote() and |
| remove_comments() since they're static now. |
| |
| * main.c (main): If we see MAKE_RESTARTS in the environment, unset |
| its export flag and obtain its value. When we need to re-exec, |
| increment the value and add it into the environment. |
| * doc/make.texi (Special Variables): Document MAKE_RESTARTS. |
| * NEWS: Mention MAKE_RESTARTS. |
| * main.c (always_make_set): New variable. Change the -B option to |
| set this one instead. |
| (main): When checking makefiles, only set always_make_flag if |
| always_make_set is set AND the restarts flag is 0. When building |
| normal targets, set it IFF always_make_set is set. |
| (main): Avoid infinite recursion with -W, too: only set what-if |
| files to NEW before we check makefiles if we've never restarted |
| before. If we have restarted, set what-if files to NEW _after_ we |
| check makefiles. |
| Fixes Savannah bug #7566: |
| |
| 2005-06-17 Paul D. Smith <psmith@gnu.org> |
| |
| * default.c: Change VMS implicit rules to use $$$$ instead of $$ |
| in the prerequisites list. |
| |
| 2005-06-12 Paul D. Smith <psmith@gnu.org> |
| |
| Fix Savannah bug # 1328. |
| |
| * configure.in: Check for atexit(). |
| * misc.c (close_stdout): Test stdout to see if writes to it have |
| failed. If so, be sure to exit with a non-0 error code. Based on |
| code found in gnulib. |
| * make.h: Prototype. |
| * main.c (main): Install close_stdout() with atexit(). |
| |
| 2005-06-10 Paul D. Smith <psmith@gnu.org> |
| |
| VMS build updates from Hartmut Becker <Hartmut.Becker@hp.com>: |
| |
| * vmsjobs.c [VMS]: Updates to compile on VMS: add some missing |
| headers; make vmsWaitForChildren() static; extern vmsify(). |
| * job.c [VMS]: Move vmsWaitForChildren() prototype to be global. |
| Don't create child_execute_job() here (it's in vmsjobs.c). |
| * makefile.vms (job.obj) [VMS]: Add vmsjobs.c as a prerequisite. |
| |
| 2005-06-09 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (push_new_variable_scope): File variables point |
| directly to the global_setlist variable. So, inserting a new |
| scope in front of that has no effect on those variables: they |
| don't go through current_variable_set_list. If we're pushing a |
| scope and the current scope is global, push it "the other way" so |
| that the new setlist is in the global_setlist variable, and |
| next points to a new setlist with the global variable set. |
| (pop_variable_scope): Properly undo a push with the new |
| semantics. |
| Fixes Savannah bug #11913. |
| |
| 2005-05-31 Boris Kolpackov <boris@kolpackov.net> |
| |
| * job.c (reap_children): Don't die of the command failed but |
| the dontcare flag is set. Fixes Savannah bug #13216. |
| |
| * implicit.c (pattern_search): When creating a target from |
| an implicit rule match, lookup pattern target and set precious |
| flag in a newly created target. Fixes Savannah bug #13218. |
| |
| 2005-05-13 Paul D. Smith <psmith@gnu.org> |
| |
| Implement "if... else if... endif" syntax. |
| |
| * read.c (eval): Push all checks for conditional words ("ifeq", |
| "else", etc.) down into the conditional_line() function. |
| (conditional_line): Rework to allow "else if..." clause. New |
| return value -2 for lines which are not conditionals. The |
| ignoring flag can now also be 2, which means "already parsed a |
| true branch". If that value is seen no other branch of this |
| conditional can be considered true. In the else parsing if there |
| is extra text after the else, invoke conditional_line() |
| recursively to see if it's another conditional. If not, it's an |
| error. If so, raise the conditional value to this level instead |
| of creating a new conditional nesting level. Special check for |
| "else" and "endif", which aren't allowed on the "else" line. |
| * doc/make.texi (Conditional Syntax): Document the new syntax. |
| |
| 2005-05-09 Paul D. Smith <psmith@gnu.org> |
| |
| * Makefile.am (EXTRA_make_SOURCES): Add vmsjobs.c |
| (MAYBE_W32): Rework how SUBDIRS are handled so that "make dist" |
| recurses to the w32 directory, even on non-Windows systems. Use |
| the method suggested in the automake manual. |
| * configure.in: Add w32/Makefile to AC_CONFIG_FILES. |
| * maintMakefile (gnulib-url): They moved the texinfo.tex files. |
| |
| 2005-05-07 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (die): If we're dying with a fatal error (not that a |
| command has failed), write back any leftover tokens before we go. |
| |
| * job.c (set_child_handler_action_flags): If there are jobs |
| waiting for the load to go down, set an alarm to go off in 1 |
| second. This allows us to wake up from a potentially long-lasting |
| read() and start a new job if the load has gone down. Turn it off |
| after the read. |
| (job_noop): Dummy signal handler function. |
| (new_job): Invoke it with the new semantics. |
| |
| * docs/make.texi: Document secondary expansion. Various cleanups |
| and random work. |
| |
| 2005-05-03 Paul D. Smith <psmith@gnu.org> |
| |
| Rename .DEFAULT_TARGET to .DEFAULT_GOAL: in GNU make terminology |
| the targets which are to ultimately be made are called "goals"; |
| see the GNU make manual. Also, MAKECMDGOALS, etc. |
| |
| * filedef.h, read.c, main.c: Change .DEFAULT_TARGET to |
| .DEFAULT_GOAL, and default_target_name to default_goal_name. |
| * doc/make.texi (Special Variables): Document .DEFAULT_GOAL. |
| |
| 2005-05-02 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c, vmsjobs.c (vmsWaitForChildren, vms_redirect, |
| vms_handle_apos, vmsHandleChildTerm, reEnableAst, astHandler, |
| tryToSetupYAst, child_execute_job) [VMS]: Move VMS-specific |
| functions to vmsjobs.c. #include it into jobs.c. |
| |
| Grant Taylor <gtaylor@picante.com> reports that -j# can lose |
| jobserver tokens. I found that this happens when an exported |
| recursive variable contains a $(shell ...) function reference: in |
| this situation we could "forget" to write back a token. |
| |
| * job.c, job.h: Add variable jobserver_tokens: counts the tokens |
| we have. It's not reliable to depend on the number of children in |
| our linked list so keep a separate count. |
| (new_job): Check jobserver_tokens rather than children && |
| waiting_jobs. Increment jobserver_tokens when we get one. |
| (free_child): If jobserver_tokens is 0, internal error. If it's |
| >1, write a token back to the jobserver pipe (we don't write a |
| token for the "free" job). Decrement jobserver_tokens. |
| |
| * main.c: Add variable master_job_slots. |
| (main): Set it to hold the number of jobs requested if we're the |
| master process, when using the jobserver. |
| (die): Sanity checks: first test jobserver_tokens to make sure |
| this process isn't holding any tokens we didn't write back. |
| Second, if master_job_slots is set count the tokens left in the |
| jobserver pipe and ensure it's the same as master_job_slots (- 1). |
| |
| 2005-04-24 Paul D. Smith <psmith@gnu.org> |
| |
| Grant Taylor <gtaylor@picante.com> reports that -j# in conjunction |
| with -l# can lose jobserver tokens, because waiting jobs are not |
| consulted properly when checking for the "free" token. |
| |
| * job.c (free_child): Count waiting_jobs as having tokens. |
| * job.c (new_job): Ditto. Plus, call start_waiting_jobs() here to |
| handle jobs waiting for the load to drop. |
| |
| 2005-04-23 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (main): Be careful to not core if a variable setting in |
| the environment doesn't contain an '='. This is illegal but can |
| happen in broken setups. |
| Reported by Joerg Schilling <schilling@fokus.fraunhofer.de>. |
| |
| 2005-04-12 Paul D. Smith <psmith@gnu.org> |
| |
| The second expansion feature causes significant slowdown. Timing |
| a complex makefile (GCC 4.1) shows a slowdown from .25s to just |
| read the makefile before the feature, to 11+s to do the same |
| operations after the feature. Additionally, memory usage |
| increased drastically. To fix this I added some intelligence that |
| avoids the overhead of the second expansion unless it's required. |
| |
| * dep.h: Add a new boolean field, need_2nd_expansion. |
| |
| * read.c (eval): When creating the struct dep for the target, |
| check if the name contains a "$"; if so set need_2nd_expansion to 1. |
| (record_files): If there's a "%" in a static pattern rule, it gets |
| converted to "$*" so set need_2nd_expansion to 1. |
| |
| * file.c (expand_deps): Rework to be more efficient. Only perform |
| initialize_file_variables(), set_file_variables(), and |
| variable_expand_for_file() if the need_2nd_expansion is set. |
| |
| * implicit.c (pattern_search): Default need_2nd_expansion to 0. |
| (pattern_search): Ditto. |
| * main.c (handle_non_switch_argument): Ditto. |
| (main): Ditto. |
| * read.c (read_all_makefiles): Ditto. |
| (eval_makefile): Ditto. |
| |
| 2005-04-07 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (main) [WINDOWS32]: Export PATH to sub-shells, not Path. |
| * variable.c (sync_Path_environment): Ditto. |
| Patch by Alessandro Vesely. Fixes Savannah bug #12209. |
| |
| * main.c (main): Define the .FEATURES variable. |
| * NEWS: Announce .FEATURES. |
| * doc/make.texi (Special Variables): Document .FEATURES. |
| |
| * remake.c (check_dep): If a file is .PHONY, update it even if |
| it's marked intermediate. Fixes Savannah bug #12331. |
| |
| 2005-03-15 Boris Kolpackov <boris@kolpackov.net> |
| |
| * file.c (expand_deps): Factor out the second expansion and |
| prerequisite line parsing logic from snap_deps(). |
| |
| * file.c (snap_deps): Use expand_deps(). Expand and parse |
| prerequisites of the .SUFFIXES special target first. Fixes |
| Savannah bug #12320. |
| |
| 2005-03-13 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (main) [MSDOS]: Export SHELL in MSDOS. Requested by Eli |
| Zaretskii. |
| |
| 2005-03-11 Paul D. Smith <psmith@gnu.org> |
| |
| * signame.c (strsignal): HAVE_DECL_SYS_SIGLIST is 0 when not |
| available, not undefined (from Earnie Boyd). |
| |
| 2005-03-10 Boris Kolpackov <boris@kolpackov.net> |
| |
| * implicit.c (pattern_search): Mark an intermediate target as |
| precious if it happened to be a prerequisite of some (other) |
| target. Fixes Savannah bug #12267. |
| |
| 2005-03-09 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (eval_makefile): Add alloca(0). |
| (eval_buffer): Ditto. |
| |
| 2005-03-09 Boris Kolpackov <boris@kolpackov.net> |
| |
| * main.c (main): Use o_file instead of o_default when defining |
| the .DEFAULT_TARGET special variable. |
| * read.c (eval): Use define_variable_global() instead of |
| define_variable() when setting new value for the .DEFAULT_TARGET |
| special variable. Fixes Savannah bug #12266. |
| |
| 2005-03-04 Boris Kolpackov <boris@kolpackov.net> |
| |
| * imlicit.c (pattern_search): Mark files for which an implicit |
| rule has been found as targets. Fixes Savannah bug #12202. |
| |
| 2005-03-04 Paul D. Smith <psmith@gnu.org> |
| |
| * AUTHORS: Update. |
| * doc/make.texi (Automatic Variables): Document $|. |
| |
| 2005-03-03 Boris Kolpackov <boris@kolpackov.net> |
| |
| * read.c (record_files): Instead of substituting % with |
| actual stem value in dependency list replace it with $*. |
| This fixes stem triple expansion bug. |
| |
| * implicit.c (pattern_search): Copy stem to a separate |
| buffer and make it a properly terminated string. Assign |
| this buffer instead of STEM (which is not terminated) to |
| f->stem. Instead of substituting % with actual stem value |
| in dependency list replace it with $*. This fixes stem |
| triple expansion bug. |
| |
| 2005-03-01 Paul D. Smith <psmith@gnu.org> |
| |
| * commands.c (fatal_error_signal) [WINDOWS32]: Don't call kill() |
| on Windows, as it takes a handle not a pid. Just exit. |
| Fix from patch #3679, provided by Alessandro Vesely. |
| |
| * configure.in: Update check for sys_siglist[] from autoconf manual. |
| * signame.c (strsignal): Update to use the new autoconf macro. |
| |
| 2005-03-01 Boris Kolpackov <boris@kolpackov.net> |
| |
| * read.c (record_files): Add a check for the list of prerequisites |
| of a static pattern rule being empty. Fixes Savannah bug #12180. |
| |
| 2005-02-28 Paul D. Smith <psmith@gnu.org> |
| |
| * doc/make.texi (Text Functions): Update docs to allow the end |
| ordinal for $(wordlist ...) to be 0. |
| * function.c (func_wordlist): Fail if the start ordinal for |
| $(wordlist ...) is <1. Matches documentation. |
| Resolves Savannah support request #103195. |
| |
| * remake.c (update_goal_chain): Fix logic for stopping in -q: |
| previously we were stopping when !-q, exactly the opposite. This |
| has been wrong since version 1.34, in 1994! |
| (update_file): If we got an error don't break out to run more |
| double-colon rules: just return immediately. |
| Fixes Savannah bug #7144. |
| |
| 2005-02-27 Paul D. Smith <psmith@gnu.org> |
| |
| * misc.c (end_of_token): Make argument const. |
| * make.h: Update prototype. |
| |
| * function.c (abspath, func_realpath, func_abspath): Use |
| PATH_VAR() and GET_PATH_MAX instead of PATH_MAX. |
| * dir.c (downcase): Use PATH_VAR() instead of PATH_MAX. |
| * read.c (record_files): Ditto. |
| * variable.c (do_variable_definition): Ditto. |
| |
| * function.c (func_error): Create a new function $(info ...) that |
| simply prints the message to stdout with no extras. |
| (function_table_init): Add new function to the table. |
| * NEWS: Add $(info ...) reference. |
| * doc/make.texi (Make Control Functions): Document it. |
| |
| New feature: if the system supports symbolic links, and the user |
| provides the -L/--check-symlink-time flag, then use the latest |
| mtime between the symlink(s) and the target file. |
| |
| * configure.in (MAKE_SYMLINKS): Check for lstat() and |
| readlink(). If both are available, define MAKE_SYMLINKS. |
| * main.c: New variable: check_symlink_flag. |
| (usage): Add a line for -L/--check-symlink-times to the help string. |
| (switches): Add -L/--check-symlink-times command line argument. |
| (main): If MAKE_SYMLINKS is not defined but the user specified -L, |
| print a warning and disable it again. |
| * make.h: Declare check_symlink_flag. |
| * remake.c (name_mtime): If MAKE_SYMLINKS and check_symlink_flag, |
| if the file is a symlink then check each link in the chain and |
| choose the NEWEST mtime we find as the mtime for the file. The |
| newest mtime might be the file itself! |
| * NEWS: Add information about this new feature. |
| * doc/make.texi (Options Summary): Add -L/--check-symlink-times docs. |
| |
| Avoid core dumps described in Savannah bug # 12124: |
| |
| * file.c: New variable snapped_deps remember whether we've run |
| snap_deps(). |
| (snap_deps): Set it. |
| * filedef.h: Extern it. |
| * read.c (record_files): Check snapped_deps; if it's set then |
| we're trying to eval a new target/prerequisite relationship from |
| within a command script, which we don't support. Fatal. |
| |
| 2005-02-28 Boris Kolpackov <boris@kolpackov.net> |
| |
| Implementation of the .DEFAULT_TARGET special variable. |
| |
| * read.c (eval): If necessary, update default_target_name when |
| reading rules. |
| * read.c (record_files): Update default_target_file if |
| default_target_name has changed. |
| * main.c (default_target_name): Define. |
| * main.c (main): Enter .DEFAULT_TARGET as make variable. If |
| default_target_name is set use default_target_file as a root |
| target to make. |
| * filedef.h (default_target_name): Declare. |
| * dep.h (free_dep_chain): |
| * misc.c (free_dep_chain): Change to operate on struct nameseq |
| and change name to free_ns_chain. |
| * file.c (snap_deps): Update to use free_ns_chain. |
| |
| 2005-02-27 Boris Kolpackov <boris@kolpackov.net> |
| |
| Implementation of the second expansion in explicit rules, |
| static pattern rules and implicit rules. |
| |
| * read.c (eval): Refrain from chopping up rule's dependencies. |
| Store them in a struct dep as a single dependency line. Remove |
| the code that implements SySV-style automatic variables. |
| |
| * read.c (record_files): Adjust the code that handles static |
| pattern rules to expand all percents instead of only the first |
| one. Reverse the order in which dependencies are stored so that |
| when the second expansion reverses them again they appear in |
| the makefile order (with some exceptions, see comments in |
| the code). Remove the code that implements SySV-style automatic |
| variables. |
| |
| * file.c (snap_deps): Implement the second expansion and chopping |
| of dependency lines for explicit rules. |
| |
| * implicit.c (struct idep): Define an auxiliary data type to hold |
| implicit rule's dependencies after stem substitution and |
| expansion. |
| |
| * implicit.c (free_idep_chain): Implement. |
| |
| * implicit.c (get_next_word): Implement helper function for |
| parsing implicit rule's dependency lines into words taking |
| into account variable expansion requests. Used in the stem |
| splitting code. |
| |
| * implicit.c (pattern_search): Implement the second expansion |
| for implicit rules. Also fixes bug #12091. |
| |
| * commands.h (set_file_variables): Declare. |
| * commands.c (set_file_variables): Remove static specifier. |
| |
| * dep.h (free_dep_chain): Declare. |
| * misc.c (free_dep_chain): Implement. |
| |
| * variable.h (variable_expand_for_file): Declare. |
| * expand.c (variable_expand_for_file): Remove static specifier. |
| |
| * make.h (strip_whitespace): Declare. |
| * function.c (strip_whitespace): Remove static specifier. |
| |
| 2005-02-26 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (main): Check for ferror() when reading makefiles from stdin. |
| Apparently some shells in Windows don't close pipes properly and |
| require this check. |
| |
| 2005-02-24 Jonathan Grant <jg@jguk.org> |
| |
| * configure.in: Add MinGW configuration options, and extra w32 code |
| directory. |
| * Makefile.am: Add MinGW configuration options, and extra w32 code |
| directory. |
| * main.c: Determine correct program string (after last \ without .exe). |
| * subproc/sub_proc.c: `GetExitCodeProcess' from incompatible pointer |
| type fix x2 |
| * w32/Makefile.am: Import to build win32 lib of sub_proc etc. |
| * subproc/w32err.c: MSVC thread directive not applied to MinGW builds. |
| * tests/run_make_tests.pl, tests/test_driver.pl: MSYS testing |
| environment support. |
| |
| 2004-04-16 Dmitry V. Levin <ldv@altlinux.org> |
| |
| * function.c (func_shell): When initializing error_prefix, check |
| that reading file name is not null. This fixes long-standing |
| segfault in cases like "make 'a1=$(shell :)' 'a2:=$(a1)'". |
| |
| 2005-02-09 Paul D. Smith <psmith@gnu.org> |
| |
| * maintMakefile: Update the CVS download URL to simplify them. |
| Also, the ftp://ftp.gnu.org/GNUinfo site was removed so I'm |
| downloading the .texi files from Savannah now. |
| |
| Fixed these issues reported by Markus Mauhart <qwe123@chello.at>: |
| |
| * main.c (handle_non_switch_argument): Only add variables to |
| command_variables if they're not already there: duplicate settings |
| waste space and can be confusing to read. |
| |
| * w32/include/sub_proc.h: Remove WINDOWS32. It's not needed since |
| this header is never included by non-WINDOWS32 code, and it |
| requires <config.h> to define which isn't always included first. |
| |
| * dir.c (read_dirstream) [MINGW]: Use proper macro names when |
| testing MINGW32 versions. |
| |
| * main.c (log_working_directory): flush stdout to be sure the WD |
| change is printed before any stderr messages show up. |
| |
| 2005-02-01 Paul D. Smith <psmith@gnu.org> |
| |
| * maintMakefile (po_repo): Update the GNU translation site URL. |
| |
| 2004-12-01 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (main): Change char* env_shell to struct variable shell_var. |
| * variable.c (target_environment): Use new shell_var. |
| |
| 2004-11-30 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in: The old way we avoided creating build.sh from |
| build.sh.in before build.sh.in exists doesn't work anymore; we |
| have to use raw M4 (thanks to Andreas Schwab <schwab@suse.de> for |
| the help!). This also keeps automake from complaining. |
| * Makefile.am (README): Add a dummy target so automake won't |
| complain that this file doesn't exist when we checkout from CVS. |
| * maintMakefile (.dep_segment): Rewrite this rule since newer |
| versions of automake don't provide DEP_FILES. |
| |
| 2004-11-30 Boris Kolpackov <boris@kolpackov.net> |
| |
| Implementation of `realpath' and `abspath' built-in functions. |
| |
| * configure.in: Check for realpath. |
| * function.c (abspath): Return an absolute file name that does |
| not contain any `.' or `..' components, nor repeated `/'. |
| * function.c (func_abspath): For each name call abspath. |
| * function.c (func_realpath): For each name call realpath |
| from libc or delegate to abspath if realpath is not available. |
| * doc/make.texi (Functions for File Names): Document new functions. |
| * doc/make.texi (Quick Reference): Ditto. |
| |
| 2004-11-28 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (main) [WINDOWS32]: Remove any trailing slashes from -C |
| arguments. Fixes bug #10252. |
| |
| Fix for bug #1276: Handle SHELL according to POSIX requirements. |
| |
| * main.c (main): Set SHELL to v_noexport by default. Remember the |
| original environment setting of SHELL in the env_shell variable. |
| * main.h: Export new env_shell variable. |
| * variable.c (target_environment): If we find a v_noexport |
| variable for SHELL, add a SHELL variable with the env_shell value. |
| * doc/make.texi (Quick Reference): Document the POSIX behavior. |
| * doc/make.texi (Variables/Recursion): Ditto. |
| |
| 2004-11-28 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (find_and_set_default_shell) [WINDOWS32]: check for |
| equality of "cmd"/"cmd.exe", not inequality. Fixes bug #11155. |
| Patch by Alessandro Vesely. |
| |
| 2004-11-12 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c (child_execute_job) [VMS]: Don't treat "#" as a comment on |
| the command line if it's inside a string. |
| Patch by: Hartmut Becker <Hartmut.Becker@hp.com> |
| |
| 2004-10-21 Boris Kolpackov <boris@kolpackov.net> |
| |
| * function.c (func_lastword): New function: return last word |
| from the list of words. |
| * doc/make.texi: Document $(lastword ). Fix broken links in |
| Quick Reference section. |
| |
| 2004-10-06 Paul D. Smith <psmith@gnu.org> |
| |
| Apply patch from Alessandro Vesely, provided with bug # 9748. |
| Fix use of tmpnam() to work with Borland C. |
| |
| * job.c (construct_command_argv_internal) [WINDOWS32]: Remove |
| construction of a temporary filename, and call new function |
| create_batch_filename(). |
| (create_batch_filename) [WINDOWS32]: New function to create a |
| temporary filename. |
| |
| 2004-10-05 Boris Kolpackov <boris@kolpackov.net> |
| |
| * read.c (record_target_var): Expand simple pattern-specific |
| variable. |
| * variable.c (initialize_file_variables): Do not expand simple |
| pattern-specific variable. |
| |
| 2004-09-28 Boris Kolpackov <boris@kolpackov.net> |
| |
| * remake.c (update_file_1): When rebuilding makefiles inherit |
| dontcare flag from a target that triggered update. |
| |
| 2004-09-27 Boris Kolpackov <boris@kolpackov.net> |
| |
| * variable.c (initialize_file_variables): Mark pattern-specific |
| variable as a per-target and copy export status. |
| |
| 2004-09-21 Boris Kolpackov <boris@kolpackov.net> |
| |
| * file.c (snap_deps): Mark .PHONY prerequisites as targets. |
| |
| * implicit.c (pattern_search): When considering an implicit rule's |
| prerequisite check that it is actually a target rather then |
| just an entry in the file hashtable. |
| |
| 2004-09-21 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (readstring): Fix some logic errors in backslash handling. |
| (eval): Remove some unnecessary processing in buffer handling. |
| (record_target_var): Assert that parse_variable_definition() succeeded. |
| Reported by: Markus Mauhart <qwe123@chello.at>. |
| |
| * misc.c: Removed the sindex() function. All instances of this |
| function were trivially replaceable by the standard strstr() |
| function, and that function will always have better (or certainly |
| no worse) performance than the very simple-minded algorithm |
| sindex() used. This can matter with complex makefiles. |
| * make.h: Remove the prototype for sindex(). |
| * function.c (subst_expand): Convert sindex() call to strstr(). |
| This means we no longer need to track the TLEN value so remove that. |
| (func_findstring): Convert sindex() to strstr(). |
| * commands.c (chop_commands): Convert sindex() calls to strstr(). |
| Suggested by: Markus Mauhart <qwe123@chello.at>. |
| |
| * main.c (find_and_set_default_shell) [WINDOWS32]: Implement the |
| idea behind Savannah Patch #3144 from david.baird@homemail.com. |
| If SHELL is set to CMD.EXE then assume it's batch-mode and |
| non-unixy. I wrote the code differently from the patch, though, |
| to make it safer. This also resolves bug #9174. |
| |
| 2004-09-20 Paul D. Smith <psmith@gnu.org> |
| |
| * expand.c (variable_expand_string): Modify to invoke |
| patsubst_expand() instead of subst_expand(); the latter didn't |
| handle suffix patterns correctly. |
| * function.c (subst_expand): Remove the SUFFIX_ONLY parameter; it |
| was used only from variable_expand_string() and is no longer used |
| there. |
| (func_subst): Ditto, on call to subst_expand(). |
| (patsubst_expand): Require the percent pointers to point to the |
| character after the %, not to the % itself. |
| * read.c (record_files): New call criteria for patsubst_expand(). |
| * variable.h: Remove SUFFIX_ONLY from subst_expand() prototype. |
| This is to fix a bug reported by Markus Mauhart <qwe123@chello.at>. |
| |
| 2004-09-19 Paul D. Smith <psmith@gnu.org> |
| |
| * function.c (subst_expand): Fix a check in by_word: look for a |
| previous blank if we're beyond the beginning of the string, not |
| the beginning of the word. |
| Bugs reported by Markus Mauhart <qwe123@chello.at>. |
| |
| 2004-05-16 Paul D. Smith <psmith@gnu.org> |
| |
| * remake.c (update_goal_chain): Change the argument specifying |
| whether we're rebuilding makefiles to be a global variable, |
| REBUILDING_MAKEFILES. |
| (complain): Extract the code that complains about no rules to make |
| a target into a separate function. |
| (update_file_1): If we tried to rebuild a file during the makefile |
| rebuild phase and it was dontcare, then no message was printed. |
| If we then try to build the same file during the normal build, |
| print a message this time. |
| (remake_file): Don't complain about un-remake-able files when |
| we're rebuilding makefiles. |
| |
| 2004-05-11 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c (construct_command_argv_internal): OS/2 patches from |
| Andreas Buening <andreas.buening@nexgo.de>. |
| |
| 2004-05-10 Paul D. Smith <psmith@gnu.org> |
| |
| * remake.c (update_file): Don't walk the double-colon chain unless |
| this is a double-colon rule. Fix suggested by Boris Kolpackov |
| <boris@kolpackov.net>. |
| |
| * makefile.vms (CFLAGS): Remove glob/globfree (see readme.vms docs) |
| * readme.vms: New section describing OpenVMS support and issues. |
| * default.c (default_variables): Add support for IA64. |
| * job.c (tryToSetupYAst) [VMS]: On VMS running make in batch mode |
| without some privilege aborts make with the error |
| %SYSTEM-F-NOPRIV. It happens when setting up a handler for |
| pressing Ctrl+Y and the input device is no terminal. The change |
| catches this error and just continues. |
| |
| Patches by Hartmut Becker <Hartmut.Becker@hp.com> |
| |
| 2004-04-25 Paul D. Smith <psmith@gnu.org> |
| |
| * commands.c (set_file_variables): Set $< properly in the face of |
| order-only prerequisites. |
| Patch from Boris Kolpackov <boris@kolpackov.net> |
| |
| 2004-04-21 Bob Byrnes <byrnes@curl.com> |
| |
| * main.c (main): Notice failures to remake makefiles. |
| |
| 2004-03-28 Paul D. Smith <psmith@gnu.org> |
| |
| Patches for Acorn RISC OS by Peter Naulls <peter@chocky.org> |
| |
| * job.c: No default shell for RISC OS. |
| (load_too_high): Hard-code the return to 1. |
| (construct_command_argv_internal): No sh_chars or sh_cmds. |
| * getloadavg.c: Don't set LOAD_AVE_TYPE on RISC OS. |
| |
| 2004-03-20 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (do_variable_definition): Don't append from the |
| global set if a previous non-appending target-specific variable |
| definition exists. Reported by Oliver Schmidt <oschmidt@gmx.net> |
| (with fix). |
| |
| * expand.c (reference_variable): Don't give up on variables with |
| no value that have the target-specific append flag set: they might |
| have a value after all. Reported by Oliver Schmidt |
| <oschmidt@gmx.net> (with fix) and also by Maksim A. Nikulin |
| <nikulin@dx1cmd.inp.nsk.su>. |
| |
| * rule.c (count_implicit_rule_limits): Don't delete patterns which |
| refer to absolute pathnames in directories that don't exist: some |
| portion of the makefile could create those directories before we |
| match the pattern. Fixes bugs #775 and #108. |
| |
| Fixes from Jonathan R. Grant <jg-make@jguk.org>: |
| |
| * main.c (main): Free makefile_mtimes if we have any. |
| * README.W32.template: Update documentation for the current status |
| of the MS-Windows port. |
| * NMakefile.template (MAKE): Add "MAKE = nmake". A conflicting |
| environment variable is sometimes already defined which causes the |
| build to fail. |
| * main.c (debug_signal_handler): Only define this function if |
| SIGUSR1 is available. |
| |
| Fixes for OS/2 from Andreas Beuning <andreas.buening@nexgo.de>: |
| |
| * configure.in [OS/2]: Relocate setting of HAVE_SA_RESTART for OS/2. |
| * README.OS2.template: Documentation updates. |
| * build.template: Add LIBINTL into LOADLIBES. Add $CFLAGS to the |
| link line for safety. |
| * maintMakefile (build.sh.in): Remove an extraneous ")". |
| * job.c (child_execute_job): Close saved FDs. |
| * job.c (exec_command) [OS/2]: exec_command(): If the command |
| can't be exec'ed and if the shell is not Unix-sh, then try again |
| with argv = { "cmd", "/c", ... }. Normally, this code is never |
| reached for the cmd shell unless the command really doesn't exist. |
| (construct_command_argv_internal) [OS/2]: The code for cmd |
| handling now uses new_argv = { "cmd", "/c", "original line", NULL}. |
| The CMD builtin commands are case insensitive so use strcasecmp(). |
| |
| 2004-03-19 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (do_define): Re-order line counter increment so the count |
| is accurate (we were losing one line per define). Reported by |
| Dave Yost <Dave@Yost.com>. |
| |
| 2004-03-06 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in (HAVE_ANSI_COMPILER): Define if we have an ANSI/ISO |
| compiler. |
| * make.h: Convert uses of __STDC__ to HAVE_ANSI_COMPILER. |
| * misc.c (message,error,fatal): Ditto. |
| * configh.dos.template: Define HAVE_ANSI_COMPILER. |
| * config.h.W32.template: Ditto. |
| * config.h-vms.template: Ditto. |
| * config.ami.template: Ditto. |
| |
| 2004-03-04 Paul D. Smith <psmith@gnu.org> |
| |
| * README.template: Add a note about broken /bin/sh on SunOS |
| 4.1.3_U1 & 4.1.4. Fix up Savannah links. |
| |
| * misc.c (message, error, fatal): Don't use "..." if we're using |
| varargs. ansi2knr should handle this but it doesn't work: it |
| translates "..." to va_dcl etc. but _AFTER_ the preprocessor is |
| done. On many systems (SunOS for example) va_dcl is a #define. |
| So, force the use of the non-"..." version on pre-ANSI compilers. |
| |
| * maintMakefile (sign-dist): Create some rules to help automate |
| the new GNU ftp upload method. |
| |
| 2004-02-24 Paul D. Smith <psmith@gnu.org> |
| |
| * config.h.W32.template: Add HAVE_STDARG_H |
| * config.h-vms.template: Ditto. |
| * config.ami.template: Ditto. |
| |
| 2004-02-23 Jonathan Grant <jg-make@jguk.org> |
| |
| * README.W32.template: Add a notation about -j with BATCH_MODE_ONLY. |
| * build_w32.bat: Remove extra "+". |
| |
| 2004-02-23 Paul D. Smith <psmith@gnu.org> |
| |
| * make.h: Create an UNUSED macro to mark unused parameters. |
| * (many): Clean up warnings by applying UNUSED, fixing |
| signed/unsigned incompatibilities, etc. |
| |
| * acinclude.m4 (AC_STRUCT_ST_MTIM_NSEC): Add quoting to silence |
| autoconf warnings. |
| * filedef.h: Name the command_state enumeration. |
| * file.c (set_command_state): Use the enumeration in the function |
| argument. |
| |
| * configure.in: Explicitly set SET_MAKE to empty, to disable |
| MAKE=make even when no make already exists. Fix bug #3823. |
| |
| 2004-02-22 Paul D. Smith <psmith@gnu.org> |
| |
| * maintMakefile: Perl script to clean up all non-CVS files. Use |
| it on all the subdirectories for the cvs-clean target. |
| |
| * main.c (decode_switches): Require non-empty strings for all our |
| string command-line options. Fixes Debian bug # 164165. |
| |
| * configure.in: Check for stdarg.h and varargs.h. |
| * make.h (USE_VARIADIC): Set this if we can use variadic functions |
| for printing messages. |
| * misc.c: Check USE_VARIADIC instead of (obsolete) HAVE_STDVARARGS. |
| (message): Ditto. |
| (error): Ditto. |
| (fatal): Ditto. |
| |
| A number of patches for OS/2 support from Andreas Buening |
| <andreas.buening@nexgo.de>: |
| |
| * job.c (child_handler) [OS/2]: Allow this on OS/2 but we have to |
| disable the SIGCHLD handler. |
| (reap_children) [OS/2]: Remove special handling of job_rfd. |
| (set_child_handler_action_flags) [OS/2]: Use this function in OS/2. |
| (new_job) [OS/2]: Disable the SIGCHLD handler on OS/2. |
| * main.c (main) [OS/2]: Special handling for paths in OS/2. |
| * configure.in [OS/2]: Force SA_RESTART for OS/2. |
| * Makefile.am (check-regression): Use $(EXEEXT) for Windows-type |
| systems. |
| |
| 2004-02-21 Paul D. Smith <psmith@gnu.org> |
| |
| * w32/subproc/sub_proc.c (process_easy) [W32]: Christoph Schulz |
| <mail@kristov.de> reports that if process_begin() fails we don't |
| handle the error condition correctly in all cases. |
| * w32/subproc/w32err.c (map_windows32_error_to_string): Make sure |
| to have a newline on the message. |
| |
| * job.c (construct_command_argv_internal): Add "test" to UNIX |
| sh_cmds[]. Fixes Savannah bug # 7606. |
| |
| 2004-02-04 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c (vms_handle_apos) [VMS]: Fix various string handling |
| situations in VMS DCL. Fixes Savannah bug #5533. Fix provided by |
| Hartmut Becker <Hartmut.Becker@hp.com>. |
| |
| 2004-01-21 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c (load_too_high): Implement an algorithm to control the |
| "thundering herd" problem when using -l to control job creation |
| via the load average. The system only recomputes the load once a |
| second but we can start many jobs in a second. To solve this we |
| keep track of the number of jobs started in the last second and |
| apply a weight to try to guess what a correct load would be. |
| The algorithm was provided by Thomas Riedl <thomas.riedl@siemens.com>. |
| Also fixes bug #4693. |
| (reap_children): Decrease the job count for this second. |
| (start_job_command): Increase the job count for this second. |
| |
| * read.c (conditional_line): Expand the text after ifn?def before |
| checking to see if it's a single word. Fixes bug #7257. |
| |
| 2004-01-09 Paul D. Smith <psmith@gnu.org> |
| |
| * file.c (print_file): Recurse to print all targets in |
| double-colon rules. Fixes bug #4518, reported (with patch) by |
| Andrew Chatham <chatham@google.com>. |
| |
| 2004-01-07 Paul D. Smith <psmith@gnu.org> |
| |
| * acinclude.m4: Remove make_FUNC_SETVBUF_REVERSED. |
| * configure.in: Change make_FUNC_SETVBUF_REVERSED to |
| AC_FUNC_SETVBUF_REVERSED. |
| |
| * doc/make.texi (Target-specific): Fix Savannah bug #1772. |
| (MAKE Variable): Fix Savannah bug #4898. |
| |
| * job.c (construct_command_argv_internal): Add "!" to the list of |
| shell escape chars. POSIX sh allows it to appear before a |
| command, to negate the exit code. Fixes bug #6404. |
| |
| * implicit.c (pattern_search): When matching an implicit rule, |
| remember which dependencies have the ignore_mtime flag set. |
| Original fix provided in Savannah patch #2349, by Benoit |
| Poulot-Cazajous <Benoit.Poulot-Cazajous@jaluna.com>. |
| |
| 2003-11-22 Paul D. Smith <psmith@gnu.org> |
| |
| * README.W32.template (Outputs): Clarification on -j with |
| BATCH_MODE_ONLY_SEHLL suggested by Jonathan R. Grant |
| <jg-make@jguk.org>. |
| |
| 2003-11-02 Paul D. Smith <psmith@gnu.org> |
| |
| * function.c (func_if): Strip all the trailing whitespace from the |
| condition, then don't expand it. Fixed bug # 5798. |
| |
| * expand.c (recursively_expand_for_file): If we're expanding a |
| variable with no file context, then use the variable's context. |
| Fixes bug # 6195. |
| |
| 2003-10-21 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (log_working_directory): Add newlines to printf()s. |
| |
| * README.cvs: Add a note to ignore warnings during autoreconf. |
| |
| * maintMakefile (po_repo): Set a new URL for PO file updates. |
| (get-config/config.guess get-config/config.sub): Get these files |
| from the Savannah config project instead of ftp.gnu.org. |
| |
| 2003-10-05 Paul Eggert <eggert@twinsun.com> |
| |
| * main.c (main): Avoid potential subscript error if environ has |
| short strings. |
| |
| 2003-08-22 Paul D. Smith <psmith@gnu.org> |
| |
| * misc.c (xmalloc, xrealloc): Add one to 0 sizes, to cater to |
| systems which don't yet implement the C89 standard :-/. |
| |
| 2003-07-18 Paul D. Smith <psmith@gnu.org> |
| |
| * dir.c (directory_contents_hash_1, directory_contents_hash_1) |
| [WINDOWS32]: Initialize hash. |
| |
| 2003-06-19 Earnie Boyd <earnie@uses.sf.net> |
| |
| * dir.c (read_dirstream): Provide a workaround for broken versions of |
| the MinGW dirent structure. |
| |
| 2003-05-30 Earnie Boyd <earnie@users.sf.net> |
| |
| * w32/include/dirent.h: Add __MINGW32__ filter. |
| |
| 2003-05-30 Earnie Boyd <earnie@users.sf.net> |
| |
| * make.h: Add global declaration of *make_host. |
| * main.c (print_usage): Remove local declaration of *make_host. |
| (print_version): Display "This program built for ..." after Copyright |
| notice. |
| |
| 2003-05-30 Earnie Boyd <earnie@users.sf.net> |
| |
| * doc/make.texi: Change "ifinfo" to "ifnottex" as suggested by the |
| execution of "makeinfo --html make.texi". |
| |
| 2003-04-30 Paul D. Smith <psmith@gnu.org> |
| |
| * build.template: Make some changes to maybe allow this script to |
| work on DOS/Windows/OS2 systems. Suggested by Andreas Buening. |
| |
| * README.OS2.template: New file for OS/2 support. Original |
| contributed by Andreas Buening. |
| * configure.in: Invoke new pds_AC_DOS_PATHS macro to test for |
| DOS-style paths. |
| |
| 2003-04-19 Paul D. Smith <psmith@gnu.org> |
| |
| Fix bug #1405: allow a target to match multiple pattern-specific |
| variables. |
| |
| * rule.c (create_pattern_var, lookup_pattern_var): Move these to |
| variable.c, where they've always belonged. |
| * rule.h: Move the prototypes and struct pattern_var as well. |
| * variable.c (initialize_file_variables): Invoke |
| lookup_pattern_var() in a loop, until no more matches are found. |
| If a match is found, create a new variable set for the target's |
| pattern variables. Then merge the contents of each matching |
| pattern variable set into the target's pattern variable set. |
| (lookup_pattern_var): Change this function to be usable |
| in a loop. It takes a starting position: if NULL, start at the |
| beginning; if non-NULL, start with the pattern variable after that |
| position, and return the next matching pattern. |
| (create_pattern_var): Create a unique instance of |
| pattern-specific variables for every definition in the makefile. |
| Don't combine the same pattern together. This allows us to |
| process the variable handling properly even when the same pattern |
| is used multiple times. |
| (parse_variable_definition): New function: break out the parsing |
| of a variable definition line from try_variable_definition. |
| (try_variable_definition): Call parse_variable_definition to |
| parse. |
| (print_variable_data_base): Print out pattern-specific variables. |
| * variable.h (struct variable): Remember when a variable is |
| conditional. Also remember its flavor. |
| (struct pattern_var): Instead of keeping a variable set, we just |
| keep a single variable for each pattern. |
| * read.c (record_target_var): Each pattern variable contains only a |
| single variable, not a set, so create it properly. |
| * doc/make.texi (Pattern-specific): Document the new behavior. |
| |
| 2003-04-17 Paul D. Smith <psmith@gnu.org> |
| |
| * dir.c (file_exists_p) [VMS]: Patch provided with Bug #3018 by |
| Jean-Pierre Portier <portierjp2@free.fr>. I don't understand the |
| file/directory naming rules for VMS so I can't tell whether this |
| is correct or not. |
| |
| 2003-04-09 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in (HAVE_DOS_PATHS): Define this on systems that need |
| DOS-style pathnames: backslash separators and drive specifiers. |
| |
| 2003-03-28 Paul D. Smith <psmith@gnu.org> |
| |
| * file.c (snap_deps): If .SECONDARY with no targets is given, set |
| the intermediate flag on all targets. Fixes bug #2515. |
| |
| 2003-03-24 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in, Makefile.am, glob/Makefile.am, doc/Makefile.am: |
| Upgrade to autoconf 2.57 and automake 1.7.3. |
| |
| * job.c: More OS/2 changes from Andreas Buening. |
| |
| * file.c (print_file): Fix variable initialization. |
| Fixes bug #2892. |
| |
| * remake.c (notice_finished_file): |
| |
| * make.h (ENULLLOOP): Set errno = 0 before invoking the command; |
| some calls (like readdir()) return NULL in valid situations |
| without resetting errno. Fixes bug #2846. |
| |
| 2003-02-25 Paul D. Smith <psmith@gnu.org> |
| |
| Port to OS/2 (__EMX__) by Andreas Buening <andreas.buening@nexgo.de>. |
| |
| * job.c (_is_unixy_shell) [OS/2]: New function. |
| Set default shell to /bin/sh. |
| (reap_children): Close the job_rfd pipe here since we don't use a |
| SIGCHLD handler. |
| (set_child_handler_action_flags): define this to empty on OS/2. |
| (start_job_command): Close the jobserver pipe and use |
| child_execute_job() instead of fork/exec. |
| (child_execute_job): Rewrite to handle stdin/stdout FDs and spawn |
| rather than exec'ing, then reconfigure stdin/stdout. |
| (exec_command): Rewrite to use spawn instead of exec. Return the |
| PID of the child. |
| |
| * main.c (main) [OS/2]: Call initialize_main(). Handle argv[0] as |
| in DOS. Handle the TEMP environment variable as in DOS. Don't |
| use a SIGCHLD handler on OS/2. Choose a shell as in DOS. Don't |
| use -j in DOS mode. Use child_execute_job() instead of |
| exec_command(). |
| |
| * function.c (func_shell) [OS/2]: Can't use fork/exec on OS/2: use |
| spawn() instead. |
| |
| * job.h [OS/2]: Move CLOSE_ON_EXEC here from job.c. Add |
| prototypes that return values. |
| |
| * remake.c (f_mtime) [OS/2]: Handle FAT timestamp offsets for OS/2. |
| |
| * read.c (readline) [OS/2]: Don't handle CRLF specially on OS/2. |
| * default.c (default_suffixes) [OS/2]: Set proper default suffixes |
| for OS/2. |
| * vpath.c (construct_vpath_list) [OS/2]: Handle OS/2 paths like |
| DOS paths. |
| |
| 2003-02-24 Paul D. Smith <psmith@gnu.org> |
| |
| * default.c [VMS]: New default rules for .cxx -> .obj compiles. |
| * job.c (child_execute_job) [VMS]: New code for handling spawn(). |
| (child_execute_job) [VMS]: Handle error status properly. |
| Patches provided by Hartmut Becker <Hartmut.Becker@compaq.com>. |
| |
| * function.c (func_shell): Use EINTRLOOP() while reading from the |
| subshell pipe (Fixes bug #2502). |
| * job.c (free_child): Use EINTRLOOP() while writing tokens to the |
| jobserver pipe. |
| * main.c (main): Ditto. |
| |
| 2003-01-30 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (eval): eval() was not fully reentrant, because the |
| collapsed buffer was static. Change it to be an automatic |
| variable so that eval() can be invoked recursively. |
| Fixes bug # 2238. |
| (eval): Apply patch # 1022: fix memory reference error on long |
| target-specific variable lines. |
| Patch provided by Steve Brown <Steve.Brown@macquarie.com>. |
| |
| * function.c (check_numeric): Combine the is_numeric() function |
| into this function, since it's only called from one place. |
| Constify this function. Have it print the incorrect string in the |
| error message. Fixes bug #2407. |
| (strip_whitespace): Constify. |
| (func_if): Constify. |
| * expand.c (expand_argument): Constify. |
| |
| 2003-01-29 Paul D. Smith <psmith@gnu.org> |
| |
| Fix bug # 2169, also reported by other people on various systems. |
| |
| * make.h: Some systems, such as Solaris and PTX, do not fully |
| implement POSIX-compliant SA_RESTART functionality; important |
| system calls like stat() and readdir() can still fail with EINTR |
| even if SA_RESTART has been set on the signal handler. So, |
| introduce macros EINTRLOOP() and ENULLLOOP() which can loop on |
| EINTR for system calls which return -1 or 0 (NULL), respectively, |
| on error. |
| Also, remove the old atomic_stat()/atomic_readdir() and |
| HAVE_BROKEN_RESTART handling. |
| |
| * configure.in: Remove setting of HAVE_BROKEN_RESTART. |
| |
| * arscan.c (ar_member_touch): Use EINTRLOOP() to wrap fstat(). |
| * remake.c (touch_file): Ditto. |
| |
| * commands.c (delete_target): Use EINTRLOOP() to wrap stat(). |
| * read.c (construct_include_path): Ditto. |
| * remake.c (name_mtime): Ditto. |
| * vpath.c (selective_vpath_search): Ditto. |
| * dir.c (find_directory): Ditto. |
| (local_stat): Ditto. |
| (find_directory): Use ENULLLOOP() to wrap opendir(). |
| (dir_contents_file_exists_p): Use ENULLLOOP() to wrap readdir(). |
| |
| * misc.c: Remove HAVE_BROKEN_RESTART, atomic_stat(), and |
| atomic_readdir() handling. |
| |
| 2003-01-22 Paul D. Smith <psmith@gnu.org> |
| |
| * function.c (func_call): Fix Bug #1744. If we're inside a |
| recursive invocation of $(call ...), mask any of the outer |
| invocation's arguments that aren't used by this one, so that this |
| invocation doesn't "inherit" them accidentally. |
| |
| 2002-12-05 Paul D. Smith <psmith@gnu.org> |
| |
| * function.c (subst_expand): Valery Khamenia reported a |
| pathological performance hit when doing substitutions on very |
| large values with lots of words: turns out we were invoking |
| strlen() a ridiculous number of times. Instead of having each |
| call to sindex() call strlen() again, keep track of how much of |
| the text we've seen and pass the length to sindex(). |
| |
| 2002-11-19 Paul D. Smith <psmith@gnu.org> |
| |
| * README.cvs, configure.in: Upgrade to require autoconf 2.56. |
| |
| |
| 2002-11-16 Paul D. Smith <psmith@gnu.org> |
| |
| * NMakefile.template (OBJS): Add hash.c object file. |
| * SMakefile.template (srcs): Ditto. |
| * Makefile.ami (objs): Ditto. |
| * build_w32.bat: Ditto. |
| |
| * Makefile.DOS.template: Remove extra dependencies. |
| |
| 2002-10-25 Paul D. Smith <psmith@gnu.org> |
| |
| * expand.c (install_variable_buffer): New function. Install a new |
| variable_buffer context and return the previous one. |
| (restore_variable_buffer): New function. Free the current |
| variable_buffer context and put a previously saved one back. |
| * variable.h: Prototypes for {install,restore}_variable_buffer. |
| * function.c (func_eval): Push a new variable_buffer context |
| before we eval, then restore the old one when we're done. |
| Fixes Bug #1517. |
| |
| * read.c (install_conditionals): New function. Install a new |
| conditional context and return the previous one. |
| (restore_conditionals): New function. Free the current |
| conditional context and put a previously saved one back. |
| (eval): Use the {install,restore}_conditionals for "include" |
| handling. |
| (eval_buffer): Use {install,restore}_conditionals to preserve the |
| present conditional state before we evaluate the buffer. |
| Fixes Bug #1516. |
| |
| * doc/make.texi (Quick Reference): Add references to $(eval ...) |
| and $(value ...). |
| (Recursion): Add a variable index entry for CURDIR. |
| |
| * README.cvs: Update to appropriate versions. |
| * Makefile.am (nodist_loadavg_SOURCES): automake gurus point out I |
| don't need to copy loadavg.c: automake is smart enough to create |
| it for me. Still have a bug in automake related to ansi2knr tho. |
| |
| 2002-10-14 Paul D. Smith <psmith@gnu.org> |
| |
| * remake.c (notice_finished_file): Only touch targets if they have |
| at least one command (as per POSIX). Resolve Bug #1418. |
| |
| * *.c: Convert to using ANSI C-style function definitions. |
| * Makefile.am: Enable the ansi2knr feature of automake. |
| * configure.in: ditto. |
| |
| 2002-10-13 Paul D. Smith <psmith@gnu.org> |
| |
| * commands.c (set_file_variables): Bug #1379: Don't use alloca() |
| for automatic variable values like $^, etc. In the case of very |
| large lists of prerequisites this causes problems. Instead reuse |
| a static buffer (resizeable) for each variable. |
| |
| * read.c (eval): Fix Bug #1391: allow "export" keyword in |
| target-specific variable definitions. Check for it and set an |
| "exported" flag. |
| (record_target_var): Set the export field to v_export if the |
| "exported" flag is set. |
| * doc/make.texi (Target-specific): Document the ability to use |
| "export". |
| |
| * doc/make.texi: Change the name of the section on automatic |
| variables from "Automatic" to "Automatic Variables". Added text |
| clarifying the scope of automatic variables. |
| |
| 2002-10-04 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (eval): Allow SysV $$@ variables to use {} braces as well |
| as () braces. |
| (record_files): Ditto. |
| |
| * expand.c (variable_expand_string): In $(A:x=y) expansion limit |
| the search for the '=' to only within the enclosing parens. |
| |
| 2002-10-03 Paul D. Smith <psmith@gnu.org> |
| |
| Version 3.80 released. |
| |
| * dir.c: Change hash functions to use K&R function definition style. |
| * function.c: Ditto. |
| * read.c: Ditto. |
| * variable.c: Ditto. |
| |
| Update to automake 1.7. |
| |
| * Makefile.am (AUTOMAKE_OPTIONS): Update to require 1.7. |
| (pdf): Remove this target as automake now provides one. |
| |
| * configure.in: Change AM_CONFIG_HEADER to AC_CONFIG_HEADERS. |
| |
| 2002-09-30 Martin P.J. Zinser <zinser@decus.de> |
| |
| * makefile.com: Updates for GNU make 3.80. |
| * makefile.vms: Ditto. |
| |
| 2002-09-23 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (enum make_word_type): Remove w_comment. |
| (get_next_mword): Don't treat comment characters as special; where |
| this function is used we will never see a comment (it's stripped |
| before we get here) and treating comments specially means that |
| targets like "foo\#bar" aren't handled properly. |
| |
| 2002-09-18 Paul D. Smith <psmith@gnu.org> |
| |
| * doc/make.texi (Bugs): Update with some info on Savannah, etc. |
| |
| * read.c (eval): Expansion of arguments to export/unexport was |
| ignoring all arguments after the first one. Change the algorithm |
| to expand the whole line once, then parse the results. |
| |
| 2002-09-17 Paul D. Smith <psmith@gnu.org> |
| |
| Fix Bug #940 (plus another bug I found while looking at this): |
| |
| * read.c (record_target_var): enter_file() will add a new entry if |
| it's a double-colon target: we don't want to do that in this |
| situation. Invoke lookup_file() and only enter_file() if it does |
| not already exist. If the file we get back is a double-colon then |
| add this variable to the "root" double-colon target. |
| |
| * variable.c (initialize_file_variables): If this file is a |
| double-colon target but is not the "root" target, then initialize |
| the root and make the root's variable list the parent of our |
| variable list. |
| |
| 2002-09-13 Paul D. Smith <psmith@gnu.org> |
| |
| * doc/make.texi (MAKE Variable): Add some indexing for "+". |
| |
| * hash.c (round_up_2): Get rid of a warning. |
| |
| 2002-09-12 Paul D. Smith <psmith@gnu.org> |
| |
| * Makefile.am (loadavg_SOURCES, loadavg.c): Tiptoe around automake |
| so it doesn't complain about getloadavg.c. |
| |
| * commands.c (set_file_variables): Make sure we always alloca() at |
| least 1 character for the value of $? (for '\0'). |
| |
| 2002-09-11 Paul D. Smith <psmith@gnu.org> |
| |
| * hash.h (STRING_COMPARE, ISTRING_COMPARE, STRING_N_COMPARE): Fix |
| macro to use RESULT instead of the incorrect _RESULT_. |
| |
| * make.h (HAVE_BROKEN_RESTART): Add prototypes for atomic_stat() |
| and atomic_readdir(). We need to #include dirent.h to get this to |
| work. |
| * misc.c (atomic_readdir): Fix typos. |
| |
| 2002-09-10 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (eval): Expand variable lists given to export and |
| unexport, so that "export $(LIST_OF_VARIABLES)" (etc.) works. |
| (conditional_line): Ditto for "ifdef". Fixes bug #103. |
| |
| * doc/make.texi (Variables/Recursion): Document this. |
| (Conditional Syntax): And here. |
| |
| 2002-09-09 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in: Check for memmove(). |
| |
| 2002-09-07 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in (HAVE_BROKEN_RESTART): Define this on PTX systems; |
| Michael Sterrett <msterret@coat.com> reports that while it has |
| SA_RESTART, it does not work properly. |
| |
| * misc.c (atomic_stat): If HAVE_BROKEN_RESTART, create a function |
| that invokes stat() and loops to do it again if it returns EINTR. |
| (atomic_readdir): Ditto, with readdir(). |
| |
| * make.h (stat, readdir): If HAVE_BROKEN_RESTART, alias stat() |
| and readdir() to atomic_stat() and atomic_readdir(). |
| |
| 2002-09-04 Paul D. Smith <psmith@gnu.org> |
| |
| * implicit.c (pattern_search): Daniel <barkalow@reputation.com> |
| reports that GNU make sometimes doesn't recognize that targets can |
| be made, when directories can be created as prerequisites. He |
| reports that changing the order of predicates in the DEP->changed |
| flag test so that lookup_file() is always performed, solves this |
| problem. |
| |
| 2002-08-08 Paul D. Smith <psmith@gnu.org> |
| |
| * configure.in: Require a newer version of gettext. |
| |
| * misc.c (perror_with_name): Translate the format string (for |
| right-to-left language support). |
| (pfatal_with_name): Ditto. |
| |
| * main.c: Create a static array of strings to store the usage |
| text. This is done to facilitate translations. |
| (struct command_switch): Remove argdesc and description fields. |
| (switches): Remove values for obsolete fields. |
| (print_usage): Print each element of the usage array. |
| |
| * hash.c: Change function definitions to be K&R style. |
| |
| 2002-08-02 Paul D. Smith <psmith@gnu.org> |
| |
| * NEWS: Remove the mention of .TARGETS; we aren't going to publish |
| this one because it's too hard to get right. We'll look at it for |
| a future release. |
| * main.c (main): Don't create the .TARGETS variable. |
| * variable.c (handle_special_var): Don't handle .TARGETS. |
| |
| 2002-08-01 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (switches): Add a new option, -B (--always-make). If |
| specified, make will rebuild all targets that it encounters even |
| if they don't appear to be out of date. |
| (always_make_flag): New flag. |
| * make.h: Extern always_make_flag. |
| * remake.c (update_file_1): Check always_make_flag; if it's set we |
| will always rebuild any target we can, even if none of its |
| prerequisites are newer. |
| * NEWS: Mention it. |
| |
| * doc/make.texi (Shell Function): Make it clear that make |
| variables marked as "export" are not passed to instances of the |
| shell function. |
| |
| Add new introspection variable .VARIABLES and .TARGETS. |
| |
| * variable.c (handle_special_var): New function. If the variable |
| reference passed in is "special" (.VARIABLES or .TARGETS), |
| calculate the new value if necessary. .VARIABLES is handled here: |
| walk through the hash of defined variables and construct a value |
| which is a list of the names. .TARGETS is handled by |
| build_target_list(). |
| (lookup_variable): Invoke handle_special_var(). |
| * file.c (build_target_list): Walk through the hask of known files |
| and construct a list of the names of all the ones marked as |
| targets. |
| * main.c (main): Initialize them to empty (and as simple variables). |
| * doc/make.texi (Special Variables): Document them. |
| * NEWS: Mention them. |
| |
| * variable.h (struct variable): Add a new flag "exportable" which |
| is true if the variable name is valid for export. |
| * variable.c (define_variable_in_set): Set "exportable" when a new |
| variable is defined. |
| (target_environment): Use the "exportable" flag instead of |
| re-checking the name here... an efficiency improvement. |
| |
| 2002-07-31 Paul D. Smith <psmith@gnu.org> |
| |
| * config.h-vms.template: Updates to build on VMS. Thanks to |
| Brian_Benning@aksteel.com for helping verify the build. |
| * makefile.com: Build the new hash.c file. |
| * hash.h: Use strcpmi(), not stricmp(), in the |
| HAVE_CASE_INSENSITIVE_FS case. |
| |
| 2002-07-30 Paul D. Smith <psmith@gnu.org> |
| |
| * hash.h (ISTRING_COMPARE, return_ISTRING_COMPARE): Add missing |
| backslashes to the HAVE_CASE_INSENSITIVE_FS case. |
| Reported by <Brian_Benning@aksteel.com>. |
| |
| 2002-07-10 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (pop_variable_scope): Remove variable made unused by |
| new hash infrastructure. |
| * read.c (dep_hash_cmp): Rewrite this to handle ignore_mtime |
| comparisons as well as name comparisons. |
| * variable.h: Add a prototype for new hash_init_function_table(). |
| * file.c (lookup_file): Remove variables made unused by new hash |
| infrastructure. |
| * dir.c (directory_contents_hash_2): Missing return of hash value. |
| (dir_contents_file_exists_p): Remove variables made unused by new |
| hash infrastructure. |
| |
| |
| Installed Greg McGary's integration of the hash functions from the |
| GNU id-utils package: |
| |
| 2002-07-10 Greg McGary <greg@mcgary.org> |
| |
| * scripts/functions/filter-out: Add literals to to the |
| pattern space in order to add complexity, and trigger |
| use of an internal hash table. Fix documentation strings. |
| * scripts/targets/INTERMEDIATE: Reverse order of files |
| passed to expected `rm' command. |
| |
| 2002-07-10 Greg McGary <greg@mcgary.org> |
| |
| * Makefile.am (SRCS): Add hash.c (noinst_HEADERS): Add hash.h |
| * hash.c: New file, taken from id-utils. |
| * hash.h: New file, taken from id-utils. |
| |
| * make.h (HASH, HASHI): Remove macros. |
| (find_char_unquote): Change arglist in decl. |
| (hash_init_directories): New function decl. |
| * variable.h (hash.h): New #include. |
| (MAKELEVEL_NAME, MAKELEVEL_LENGTH): New constants. |
| * filedef.h (hash.h): New #include. |
| (struct file) [next]: Remove member. |
| (file_hash_enter): Remove function decl. |
| (init_hash_files): New function decl. |
| |
| * ar.c (ar_name): Delay call to strlen until needed. |
| * main.c (initialize_global_hash_tables): New function. |
| (main): Call it. Use MAKELEVEL_NAME & MAKELEVEL_LENGTH. |
| * misc.c (remove_comments): Pass char constants to find_char_unquote. |
| * remake.c (notice_finished_file): Update last_mtime on `prev' chain. |
| |
| * dir.c (hash.h): New #include. |
| (struct directory_contents) [next, files]: Remove members. |
| [ctime]: Add member for VMS. [dirfiles]: Add hash-table member. |
| (directory_contents_hash_1, directory_contents_hash_2, |
| directory_contents_hash_cmp): New functions. |
| (directories_contents): Change type to `struct hash_table'. |
| (struct directory) [next]: Remove member. |
| (directory_hash_1, directory_hash_2, directory_hash_cmp): New funcs. |
| (directory): Change type to `struct hash_table'. |
| (struct dirfile) [next]: Remove member. |
| [length]: Add member. [impossible]: widen type to fill alignment gap. |
| (dirfile_hash_1, dirfile_hash_2, dirfile_hash_cmp): New functions. |
| (find_directory): Use new hash table package. |
| (dir_contents_file_exists_p): Likewise. |
| (file_impossible): Likewise. |
| (file_impossible_p): Likewise. |
| (print_dir_data_base): Likewise. |
| (open_dirstream): Likewise. |
| (read_dirstream): Likewise. |
| (hash_init_directories): New function. |
| |
| * file.c (hash.h): New #include. |
| (file_hash_1, file_hash_2, file_hash_cmp): New functions. |
| (files): Change type to `struct hash_table'. |
| (lookup_file): Use new hash table package. |
| (enter_file): Likewise. |
| (remove_intermediates): Likewise. |
| (snap_deps): Likewise. |
| (print_file_data_base): Likewise. |
| |
| * function.c |
| (function_table_entry_hash_1, function_table_entry_hash_2, |
| function_table_entry_hash_cmp): New functions. |
| (lookup_function): Remove `table' argument. |
| Use new hash table package. |
| (struct a_word) [chain, length]: New members. |
| (a_word_hash_1, a_word_hash_2, a_word_hash_cmp): New functions. |
| (struct a_pattern): New struct. |
| (func_filter_filterout): Pass through patterns noting boundaries |
| and '%', if present. Note a_word length. Use a hash table if |
| arglists are large enough to justify cost. |
| (function_table_init): Renamed from function_table. |
| (function_table): Declare as `struct hash_table'. |
| (FUNCTION_TABLE_ENTRIES): New constant. |
| (hash_init_function_table): New function. |
| |
| * read.c (hash.h): New #include. |
| (read_makefile): Pass char constants to find_char_unquote. |
| (dep_hash_1, dep_hash_2, dep_hash_cmp): New functions. |
| (uniquize_deps): Use hash table to efficiently identify duplicates. |
| (find_char_unquote): Accept two char-constant stop chars, rather |
| than a string constant, avoiding zillions of calls to strchr. |
| Tighten inner search loops to test only for desired delimiters. |
| |
| * variable.c (variable_hash_1, variable_hash_2, |
| variable_hash_cmp): New functions. |
| (variable_table): Declare as `struct hash_table'. |
| (global_variable_set): Remove initialization. |
| (init_hash_global_variable_set): New function. |
| (define_variable_in_set): Use new hash table package. |
| (lookup_variable): Likewise. |
| (lookup_variable_in_set): Likewise. |
| (initialize_file_variables): Likewise. |
| (pop_variable_scope): Likewise. |
| (create_new_variable_set): Likewise. |
| (merge_variable_sets): Likewise. |
| (define_automatic_variables): Likewise. |
| (target_environment): Likewise. |
| (print_variable_set): Likewise. |
| |
| 2002-07-10 Paul D. Smith <psmith@gnu.org> |
| |
| Implement the SysV make syntax $$@, $$(@D), and $$(@F) in the |
| prerequisite list. A real SysV make will expand the entire |
| prerequisites list _twice_: we don't do that as it's a big |
| backward-compatibility problem. We only replace those specific |
| variables. |
| |
| * read.c (record_files): Replace any $@, $(@D), and $(@F) variable |
| references left in the list of prerequisites. Check for .POSIX as |
| we record targets, so we can disable non-POSIX behavior while |
| reading makefiles as well as running them. |
| (eval): Check the prerequisite list to see if we have anything |
| that looks like a SysV prerequisite variable reference. |
| |
| 2002-07-09 Paul D. Smith <psmith@gnu.org> |
| |
| * doc/make.texi (Prerequisite Types): Add a new section describing |
| order-only prerequisites. |
| |
| * read.c (uniquize_deps): If we have the same file as both a |
| normal and order-only prereq, get rid of the order-only prereq, |
| since the normal one supersedes it. |
| |
| 2002-07-08 Paul D. Smith <psmith@gnu.org> |
| |
| * AUTHORS: Added Greg McGary to the AUTHORS file. |
| * NEWS: Blurbed order-only prerequisites. |
| * file.c (print_file): Show order-only deps properly when printing |
| the database. |
| |
| * maintMakefile: Add "update" targets for wget'ing the latest |
| versions of various external files. Taken from Makefile.maint in |
| autoconf, etc. |
| |
| * dosbuild.bat: Somehow we got _double_ ^M's. Remove them. |
| Reported by Eli Zaretskii <eliz@is.elta.co.il>. |
| |
| 2002-07-07 Paul D. Smith <psmith@gnu.org> |
| |
| * po/*.po: Remove. We'll use wget to retrieve them at release |
| time. |
| |
| * variable.c (do_variable_definition) [W32]: On W32 using cmd |
| rather than a shell you get an exception. Make sure we look up |
| the variable. Patch provided by Eli Zaretskii <eliz@is.elta.co.il>. |
| |
| * remake.c (notice_finished_file): Fix handling of -t flag. |
| Patch provided by Henning Makholm <henning@makholm.net>. |
| |
| * implicit.c (pattern_search): Some systems apparently run short |
| of stack space, and using alloca() in this function caused an |
| overrun. I modified it to use xmalloc() on the two variables |
| which seemed like they might get large. Fixes Bug #476. |
| |
| * main.c (print_version): Update copyright notice to conform with |
| GNU standards. |
| (print_usage): Update help output. |
| |
| * function.c (func_eval): Create a new make function, $(eval |
| ...). Expand the arguments, put them into a buffer, then invoke |
| eval_buffer() on the resulting string. |
| (func_quote): Create a new function, $(quote VARNAME). Inserts |
| the value of the variable VARNAME without expanding it any |
| further. |
| |
| * read.c (struct ebuffer): Change the linebuffer structure to an |
| "eval buffer", which can be either a file or a buffer. |
| (eval_makefile): Move the code in the old read_makefile() which |
| located a makefile into here: create a struct ebuffer with that |
| information. Have it invoke the new function eval() with that |
| ebuffer. |
| (eval_buffer): Create a new function that creates a struct ebuffer |
| that holds a string buffer instead of a file. Have it invoke |
| eval() with that ebuffer. |
| (eval): New function that contains the guts of the old |
| read_makefile() function: this function parses makefiles. Obtains |
| data to parse from the provided ebuffer. Some modifications to |
| make the flow of the function cleaner and clearer. Still could |
| use some work here... |
| (do_define): Takes a struct ebuffer instead of a FILE*. Read the |
| contents of the define/endef variable from the ebuffer. |
| (readstring): Read the next line from a string-style ebuffer. |
| (readline): Read the next line from an ebuffer. If it's a string |
| ebuffer, invoke readstring(). If it's a FILE* ebuffer, read it |
| from the file. |
| |
| * dep.h (eval_buffer): Prototype eval_buffer(); |
| |
| * variable.c (do_variable_definition): Make sure that all |
| non-target-specific variables are registered in the global set. |
| If we're invoked from an $(eval ...) we might be inside a $(call |
| ...) or other function which has pushed a variable scope; we still |
| want to define our variables from evaluated makefile code in the |
| global scope. |
| |
| 2002-07-03 Greg McGary <greg@mcgary.org> |
| |
| * dep.h (struct dep) [ignore_mtime]: New member. |
| [changed]: convert to a bitfield. |
| * implicit.c (pattern_search): Zero ignore_mtime. |
| * main.c (main, handle_non_switch_argument): Likewise. |
| * rule.c (convert_suffix_rule): Likewise. |
| * read.c (read_all_makefiles, read_makefile, multi_glob): Likewise. |
| (read_makefile): Parse '|' in prerequisite list. |
| (uniquize_deps): Consider ignore_mtime when comparing deps. |
| * remake.c (update_file_1, check_dep): Don't force remake for |
| dependencies that have d->ignore_mtime. |
| * commands.c (FILE_LIST_SEPARATOR): New constant. |
| (set_file_variables): Don't include a |
| prerequisite in $+, $^ or $? if d->ignore_mtime. |
| Define $|. |
| |
| 2002-06-18 Paul D. Smith <psmith@gnu.org> |
| |
| * make.texinfo: Updates for next revision. New date/rev/etc. |
| Recreate all Info menus. Change license on the manual to the GNU |
| Free Documentation License. A number of typos. |
| (Variables Simplify): Don't use "-" before it's defined. |
| (Automatic Prerequisites): Rewrite the target example to work |
| properly if the compile fails. Remove incorrect comments about |
| how "set -e" behaves. |
| (Text Functions): Move the "word", "wordlist", "words", and |
| "firstword" functions here, from "File Name Functions". |
| * make-stds.texi: Update from latest GNU version. |
| * fdl.texi: (created) Import the latest GNU version. |
| |
| 2002-06-06 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (do_variable_definition): New function: extract the |
| part of try_variable_definition() that actually sets the value |
| into a separate function. |
| (try_variable_definition): Call do_variable_definition() after |
| parsing the variable definition string. |
| (define_variable_in_set): Make the name argument const. |
| |
| * variable.h (enum variable_flavor): Make public. |
| (do_variable_definition): Create prototype. |
| |
| * read.c (read_all_makefiles): Create a new built-in variable, |
| MAKEFILE_LIST. |
| (read_makefile): Add each makefile read in to this variable value. |
| |
| 2002-05-18 Eli Zaretskii <eliz@is.elta.co.il> |
| |
| * Makefile.DOS.template: Tweak according to changes in the |
| distribution. Add back the dependencies of *.o files. |
| |
| * configh.dos.template: Synchronize with config.h.in. |
| |
| 2002-05-09 Paul D. Smith <psmith@gnu.org> |
| |
| * file.c (file_timestamp_now): Use K&R function declaration. |
| |
| * getloadavg.c (getloadavg): Merge setlocale() fix from sh-utils |
| getloadavg.c. Autoconf thinks QNX is SVR4-like, but it isn't, so |
| #undef it. Remove predefined setup of NLIST_STRUCT. Decide |
| whether to include nlist.h based on HAVE_NLIST_H. Change obsolete |
| NLIST_NAME_UNION to new HAVE_STRUCT_NLIST_N_UN_N_NAME. |
| * configure.in (NLIST_STRUCT): Define this if we have nlist.h and |
| nlist.n_name is a pointer rather than an array. |
| |
| * acinclude.m4 (make_FUNC_SETVBUF_REVERSED): Grab the latest |
| version of AC_FUNC_SETVBUF_REVERSED from autoconf CVS. |
| * configure.in: Use it instead of the old version. |
| |
| * main.c (main): Prefer setvbuf() to setlinebuf(). |
| |
| 2002-05-08 Paul D. Smith <psmith@gnu.org> |
| |
| * Makefile.am (make_LDADD): Add GETLOADAVG_LIBS. |
| (loadavg_LDADD): Ditto. |
| |
| 2002-04-29 Paul D. Smith <psmith@gnu.org> |
| |
| * expand.c (recursively_expand_for_file): Rename |
| recursively_expand() to recursively_expand_for_file() and provide |
| an extra argument, struct file. If the argument is provided, set |
| the variable scope to that of the file before expanding. |
| * variable.h (recursively_expand): Make this a macro that invokes |
| recursively_expand_for_file() with a NULL file pointer. |
| * variable.c (target_environment): Call the renamed function and |
| provide the current file context. |
| Fixes Debian bug #144306. |
| |
| 2002-04-28 Paul D. Smith <psmith@gnu.org> |
| |
| Allow $(call ...) user-defined variables to be self-referencing |
| without throwing an error. Allows implementation of transitive |
| closures, among other possibly useful things. |
| Requested by: Philip Guenther <guenther@sendmail.com> |
| |
| * variable.h (struct variable): Add a new field: exp_count, and |
| new macros to hold its size and maximum value. |
| (warn_undefined): Make this a macro. |
| * variable.c (define_variable_in_set): Initialize it. |
| * expand.c (recursively_expand): If we detect recursive expansion |
| of a variable, check the exp_count field. If it's greater than 0 |
| allow the recursion and decrement the count. |
| (warn_undefined): Remove this (now a macro in variable.h). |
| * function.c (func_call): Before we expand the user-defined |
| function, modify its exp_count field to contain the maximum |
| number of recursive calls we'll allow. After the call, reset it |
| to 0. |
| |
| 2002-04-21 Paul D. Smith <psmith@gnu.org> |
| |
| Modified to use latest autoconf (2.53), automake (1.6.1), and |
| gettext (0.11.1). We're using gettext's new "external" support, |
| to avoid including libintl source with GNU make. |
| |
| * README.cvs: New file. Explain how to build GNU make from CVS. |
| |
| * configure.in: Modify checking for the system glob library. |
| Use AC_EGREP_CPP instead of AC_TRY_CPP. Remove the setting of |
| GLOBDIR (we will always put "glob" in SUBDIRS, so automake |
| etc. will manage it correctly). Set an automake conditional |
| USE_LOCAL_GLOB to decide whether to compile the glob library. |
| |
| * getloadavg.c (main): Include make.h in the "TEST" program to |
| avoid warnings. |
| |
| * Makefile.am: Remove special rules for loadavg. Replace them |
| with Automake capabilities for building extra programs. |
| |
| * signame.c: This file does nothing if the system provide |
| strsignal(). If not, it implements strsignal(). If the system |
| doesn't define sys_siglist, then we make our own; otherwise we use |
| the system version. |
| * signame.h: Removed. |
| |
| * main.c (main): No need to invoke signame_init(). Update copyright. |
| |
| * ABOUT-NLS: Removed. |
| * gettext.c: Removed. |
| * gettext.h: Get a simplified copy from the gettext package. |
| * po/*: Created. |
| * i18n/*.po: Moved to po/. |
| * i18n/: Removed. |
| |
| * config/*: Created. Contains package configuration helper files. |
| * config.guess, config.sub: Moved to config directory. |
| |
| * configure.in (AC_CONFIG_FILES): Add po/Makefile.in, config/Makefile. |
| Rework to use new-style autoconf features. Use the "external" |
| mode for gettext. Make the build.sh config file conditional on |
| whether build.sh.in exists, to avoid autoconf errors. |
| * acinclude.m4: Removed almost all macros as being obsolete. |
| Rewrote remaining macros to use AC_DEFINE. |
| * acconfig.h: Removed. |
| |
| * Makefile.am (EXTRA_DIST): Add config/config.rpath. Use a |
| conditional to handle customs support. Remove special handling |
| for i18n features. |
| |
| 2002-04-20 Paul D. Smith <psmith@gnu.org> |
| |
| * function.c (func_call): Don't mark the argument variables $1, |
| etc. as recursive. They've already been fully expanded so |
| there's no need to do it again, and doing so strips escaped $'s. |
| Reported by Sebastian Glita <glseba@yahoo.com>. |
| |
| * remake.c (notice_finished_file): Walk through double-colon |
| entries via the prev field, not the next field! |
| Reported by Greg McGary <greg@mcgary.org>. |
| |
| * main.c (main): If the user specifies -q and asks for a specific |
| target which is a makefile, we got an assert. In that case it |
| turns out we should continue normally instead. |
| |
| * i18n/de.po, i18n/fr.po: Installed an updated translation. |
| |
| * i18n/he.po: Installed a new translation. |
| |
| 2002-01-07 Paul D. Smith <psmith@gnu.org> |
| |
| * i18n/es.po, i18n/ru.po: Installed an updated translation. |
| |
| 2001-12-04 Paul D. Smith <psmith@gnu.org> |
| |
| * i18n/ja.po: Installed an updated translation. |
| |
| 2001-09-06 Paul Eggert <eggert@twinsun.com> |
| |
| * configure.in (AC_CHECK_HEADERS): Add sys/resource.h. |
| (AC_CHECK_FUNCS): Add getrlimit, setrlimit. |
| |
| * main.c: Include <sys/resource.h> if it, getrlimit, and setrlimit |
| are available. |
| (main): Get rid of any avoidable limit on stack size. |
| |
| 2001-09-04 Paul D. Smith <psmith@gnu.org> |
| |
| * i18n/da.po: Installed an updated translation. |
| |
| 2001-08-03 Paul D. Smith <psmith@gnu.org> |
| |
| * i18n/fr.po: Installed an updated translation. |
| Resolves Debian bug #106720. |
| |
| 2001-06-13 Paul D. Smith <psmith@gnu.org> |
| |
| * i18n/da.po, configure.in (ALL_LINGUAS): Installed a new |
| translation. |
| |
| 2001-06-11 Paul D. Smith <psmith@gnu.org> |
| |
| * i18n/ko.po: Installed a new translation. |
| |
| 2001-05-06 Paul D. Smith <psmith@gnu.org> |
| |
| Modify the EINTR handling. |
| |
| * job.c (new_job): Reorganize the jobserver algorithm. Reorder |
| the way in which we manage the file descriptor/signal handler race |
| trap to be more efficient. |
| |
| 2001-05-06 Paul Eggert <eggert@twinsun.com> |
| |
| Restart almost all system calls that are interrupted, instead |
| of worrying about EINTR. The lone exception is the read() for |
| job tokens. |
| |
| * configure.in (HAVE_SA_RESTART): New macro. |
| (MAKE_JOBSERVER): Define to 1 only if HAVE_SA_RESTART. |
| * main.c (main): Use SA_RESTART instead of the old, |
| nonstandard SA_INTERRUPT. |
| |
| * configure.in (AC_CHECK_FUNCS): Add bsd_signal. |
| * main.c (bsd_signal): New function or macro, |
| if the implementation doesn't supply it. |
| (The bsd_signal function will be in POSIX 1003.1-200x.) |
| (HANDLESIG): Remove. |
| (main, FATAL_SIG): Use bsd_signal instead of signal or HANDLESIG. |
| |
| * make.h (EINTR_SET): Remove. |
| (SA_RESTART): New macro. |
| |
| * arscan.c (ar_member_touch): Don't worry about EINTR. |
| * function.c (func_shell): Likewise. |
| * job.c (reap_children, free_child, new_job): Likewise. |
| * main.c (main): Likewise. |
| * remake.c (touch_file, name_mtime): Likewise. |
| |
| * arscan.c (ar_member_touch): Fix bug uncovered by EINTR removal; |
| if fstat failed with errno!=EINTR, the error was ignored. |
| |
| * job.c (set_child_handler_action_flags): New function. |
| (new_job): Use it to temporarily clear the SIGCHLD action flags |
| while reading the token. |
| |
| 2001-05-02 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c (start_job_command): Don't add define/endef per-line flags |
| to the top-level flags setting. |
| |
| 2001-04-03 Paul D. Smith <psmith@gnu.org> |
| |
| * arscan.c (VMS_get_member_info,ar_scan) [VMS]: VMS sets the low |
| bit on error, so check for odd return values, not non-0 return |
| values. |
| (VMS_get_member_info): Calculate the timezone differences correctly. |
| Reported by John Fowler <jfowler@nyx.net>. |
| |
| |
| 2001-03-14 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (lookup_variable) [VMS]: Null-terminate the variable |
| value before invoking define_variable(). |
| Reported by John Fowler <jfowler@nyx.net>. |
| |
| 2001-02-07 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (record_target_var): If we reset the variable due to a |
| command-line variable setting overriding it, turn off the "append" |
| flag. |
| |
| 2001-01-17 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (lookup_variable) [VMS]: When getting values from the |
| environment, allocate enough space for the _value_ plus escapes, |
| not enough space for the name plus escapes :-/. |
| Reported by John Fowler <jfowler@nyx.net>. |
| |
| * remake.c (f_mtime): Removed the "***" prefix from the mod time |
| warnings that make generates, so it doesn't look like an error. |
| Reported by Karl Berry <karl@gnu.org>. |
| |
| |
| Fix for PR/2020: Rework appended target-specific variables. I'm |
| fairly confident this algorithm is finally correct. |
| |
| * expand.c (allocated_variable_append): Rewrite. Instead of |
| expanding each appended variable then adding all the expanded |
| strings together, we append all the unexpanded values going up |
| through the variable set contexts, then expand the final result. |
| This behaves just like non-target-specific appended variable |
| values, while the old way didn't in various corner cases. |
| (variable_append): New function: recursively append the unexpanded |
| value of a variable, walking from the outermost variable scope to |
| the innermost. |
| * variable.c (lookup_variable): Remove the code that looked up the |
| variable set list if the found variable was "append". We don't |
| need this anymore. |
| (lookup_variable_in_set): Make this non-static so we can use it |
| elsewhere. |
| (try_variable_definition): Use lookup_variable_in_set() rather |
| than faking out current_variable_set_list by hand (cleanup). |
| * variable.h: Add a prototype for the now non-static |
| lookup_variable_in_set(). |
| |
| 2000-11-17 Paul D. Smith <psmith@gnu.org> |
| |
| * remake.c (f_mtime) [WINDOWS32]: On various advice, I changed the |
| WINDOWS32 port to assume timestamps can be up to 3 seconds away |
| before throwing a fit. |
| |
| 2000-11-17 Paul D. Smith <psmith@gnu.org> |
| |
| * read.c (readline): CRLF calculations had a hole, if you hit the |
| buffer grow scenario just right. Reworked the algorithm to avoid |
| the need for len or lastlen at all. Problem description with |
| sample code chages provided by Chris Faylor <cgf@redhat.com>. |
| |
| 2000-10-24 Paul D. Smith <psmith@gnu.org> |
| |
| * gettext.c (SWAP): Declare this with the prototype, otherwise |
| some systems don't work (non-32-bit? Reported for Cray T3E). |
| Reported by Thorstein Thorsteinsson <thor@signe.teokem.lu.se>. |
| |
| 2000-10-05 Paul D. Smith <psmith@gnu.org> |
| |
| * acinclude.m4 (AM_LC_MESSAGES): Remove undefined macro |
| AM_LC_MESSAGES; it doesn't seem to do anything anyway?? |
| |
| * i18n/gl.po, configure.in (ALL_LINGUAS): New Galician translation. |
| |
| 2000-09-22 Paul D. Smith <psmith@gnu.org> |
| |
| * gettext.c: Don't #define _GETTEXT_H here; we only include some |
| parts of the real gettext.h here, and we expect to really include |
| the real gettext.h later. If we keep this #define, it's ignored. |
| |
| 2000-09-21 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (log_working_directory): Rework the text to use complete |
| sentences, to make life simpler for the translators. |
| |
| 2000-08-29 Paul D. Smith <psmith@gnu.org> |
| |
| * file.c (remove_intermediates): Print a debug message before we |
| remove intermediate files, so the user (if she uses -d) knows |
| what's going on. |
| |
| 2000-08-21 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (try_variable_definition): Change how we handle |
| target-specific append variable defns: instead of just setting the |
| value, expand it as an append _but_ only within the current |
| target's context. Otherwise we lose all but the last value if the |
| variable is appended more than once within the current target |
| context. Fixes PR/1831. |
| |
| 2000-08-16 Paul D. Smith <psmith@gnu.org> |
| |
| * function.c (func_shell): Nul-terminate the buffer before |
| printing an exec error message (just in case it's not!). |
| Fixes PR/1860, reported by Joey Hess <joey@valinux.com>. |
| |
| 2000-07-25 Paul D. Smith <psmith@gnu.org> |
| |
| * job.c (construct_command_argv_internal): Add "~" to the list of |
| sh_chars[] which disallow optimizing out the shell call. |
| |
| 2000-07-23 Paul Eggert <eggert@twinsun.com> |
| |
| * NEWS, make.texinfo: Document .LOW_RESOLUTION_TIME, which |
| supersedes --disable-nsec-timestamps. |
| * make.texinfo: Consistently use "time stamp" instead of "timestamp". |
| * README: Remove --disable-nsec-timestamps. |
| |
| * filedef.h (struct file.low_resolution_time): New member. |
| * file.c (snap_deps): Add support for .LOW_RESOLUTION_TIME. |
| * remake.c (update_file_1): |
| Avoid spurious rebuilds due to low resolution time stamps, |
| generalizing the earlier code that applied only to archive members. |
| (f_mtime): Archive members always have low resolution time stamps. |
| |
| * configure.in: Remove --disable-nsec-timestamps, as this has |
| been superseded by .LOW_RESOLUTION_TIME. |
| |
| 2000-07-23 Paul Eggert <eggert@twinsun.com> |
| |
| * configure.in (enable_nsec_timestamps): Renamed from |
| make_cv_nsec_timestamps, since enable/disable options |
| shouldn't be cached. |
| |
| 2000-07-23 Bruno Haible <haible@clisp.cons.org> |
| and Paul Eggert <eggert@twinsun.com> |
| |
| * file.c (file_timestamp_now): |
| Use preprocessor-time check for FILE_TIMESTAMP_HI_RES |
| so that clock_gettime is not linked unless needed. |
| |
| * filedef.h (FILE_TIMESTAMP_HI_RES): |
| Remove definition; "configure" now does this. |
| |
| * configure.in (jm_AC_TYPE_UINTMAX_T): Move up, |
| to before high resolution file timestamp check, |
| since that check now uses uintmax_t. |
| (FILE_TIMESTAMP_HI_RES): Define to nonzero if the code should use |
| high resolution file timestamps. |
| (HAVE_CLOCK_GETTIME): Do not define if !FILE_TIMESTAMP_HI_RES, |
| so that we don't link in clock_gettime unnecessarily. |
| |
| 2000-07-17 Paul D. Smith <psmith@gnu.org> |
| |
| * i18n/ja.po: New version of the translation file. |
| |
| 2000-07-07 Paul D. Smith <psmith@gnu.org> |
| |
| * remake.c (f_mtime): If NO_FLOAT is defined, don't bother with |
| the offset calculation. |
| (name_mtime): Replace EINTR test with EINTR_SET macro. |
| |
| 2000-07-07 Paul Eggert <eggert@twinsun.com> |
| |
| Fix for PR/1811: |
| |
| * remake.c (update_file_1): |
| Avoid spurious rebuilds of archive members due to their |
| timestamp resolution being only one second. |
| (f_mtime): Avoid spurious warnings of timestamps in the future due to |
| the clock's resolution being lower than file timestamps'. |
| When warning about future timestamps, report only the discrepancy, |
| not the absolute value of the timestamp and the current time. |
| |
| * file.c (file_timestamp_now): New arg RESOLUTION. |
| * filedef.h (file_timestamp_now): Likewise. |
| (FILE_TIMESTAMP_NS): Now returns int. All uses changed. |
| |
| 2000-07-05 Paul D. Smith <psmith@gnu.org> |
| |
| * variable.c (lookup_variable) [VMS]: Remove vestigial references |
| to listp. Fixes PR/1793. |
| |
| 2000-06-26 Paul Eggert <eggert@twinsun.com> |
| |
| * Makefile.am (MAINTAINERCLEANFILES): New macro, with stamp-pot in it. |
| |
| * dir.c (vms_hash): Ensure ctype macro args are nonnegative. |
| |
| * remake.c (f_mtime): Remove unused var memtime. |
| |
| 2000-06-25 Martin Buchholz <martin@xemacs.org> |
| |
| * make.texinfo, NEWS, TODO.private: Minor spelling corrections. |
| Ran spell-check on make.texinfo. |
| |
| 2000-06-23 Paul D. Smith <psmith@gnu.org> |
| |
| * main.c (main): Replace EXIT_SUCCESS, EXIT_FAILURE, and |
| EXIT_TROUBLE with MAKE_SUCCESS, MAKE_FAILURE, and MAKE_TROUBLE. |
| * make.h: Define these macros. |
| |
| * Version 3.79.1 released. |
| |
| * configure.in: Add a new option, --disable-nsec-timestamps, to |
| avoid using sub-second timestamps on systems that support it. It |
| can lead to problems, e.g. if your makefile relies on "cp -p". |
| * README.template: Document the issue with "cp -p". |
| |
| * config.guess, config.sub: Updated. |
| |
| |
| |
| See ChangeLog.2, available in the CVS repository at: |
| |
| http://savannah.gnu.org/cvs/?group=make |
| |
| for earlier changes. |
| |
| |
| Copyright (C) 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software |
| Foundation, Inc. |
| This file is part of GNU Make. |
| |
| GNU Make is free software; you can redistribute it and/or modify it under the |
| terms of the GNU General Public License as published by the Free Software |
| Foundation; either version 2, or (at your option) any later version. |
| |
| GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR |
| A PARTICULAR PURPOSE. See the GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| GNU Make; see the file COPYING. If not, write to the Free Software |
| Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. |
