| # Makefile.in generated by automake 1.15 from Makefile.am. |
| # @configure_input@ |
| |
| # Copyright (C) 1994-2014 Free Software Foundation, Inc. |
| |
| # This Makefile.in is free software; the Free Software Foundation |
| # gives unlimited permission to copy and/or distribute it, |
| # with or without modifications, as long as this notice is preserved. |
| |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| # PARTICULAR PURPOSE. |
| |
| @SET_MAKE@ |
| |
| # This is a -*-Makefile-*-, or close enough |
| # |
| # Copyright (C) 1997-2016 Free Software Foundation, Inc. |
| # This file is part of GNU Make. |
| # |
| # GNU Make is free software; you can redistribute it and/or modify it under |
| # the terms of the GNU General Public License as published by the Free Software |
| # Foundation; either version 3 of the License, or (at your option) any later |
| # version. |
| # |
| # GNU Make is distributed in the hope that it will be useful, but WITHOUT ANY |
| # WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS |
| # FOR A PARTICULAR PURPOSE. See the GNU General Public License for more |
| # details. |
| # |
| # You should have received a copy of the GNU General Public License along with |
| # this program. If not, see <http://www.gnu.org/licenses/>. |
| |
| |
| VPATH = @srcdir@ |
| am__is_gnu_make = { \ |
| if test -z '$(MAKELEVEL)'; then \ |
| false; \ |
| elif test -n '$(MAKE_HOST)'; then \ |
| true; \ |
| elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ |
| true; \ |
| else \ |
| false; \ |
| fi; \ |
| } |
| am__make_running_with_option = \ |
| case $${target_option-} in \ |
| ?) ;; \ |
| *) echo "am__make_running_with_option: internal error: invalid" \ |
| "target option '$${target_option-}' specified" >&2; \ |
| exit 1;; \ |
| esac; \ |
| has_opt=no; \ |
| sane_makeflags=$$MAKEFLAGS; \ |
| if $(am__is_gnu_make); then \ |
| sane_makeflags=$$MFLAGS; \ |
| else \ |
| case $$MAKEFLAGS in \ |
| *\\[\ \ ]*) \ |
| bs=\\; \ |
| sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ |
| | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ |
| esac; \ |
| fi; \ |
| skip_next=no; \ |
| strip_trailopt () \ |
| { \ |
| flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ |
| }; \ |
| for flg in $$sane_makeflags; do \ |
| test $$skip_next = yes && { skip_next=no; continue; }; \ |
| case $$flg in \ |
| *=*|--*) continue;; \ |
| -*I) strip_trailopt 'I'; skip_next=yes;; \ |
| -*I?*) strip_trailopt 'I';; \ |
| -*O) strip_trailopt 'O'; skip_next=yes;; \ |
| -*O?*) strip_trailopt 'O';; \ |
| -*l) strip_trailopt 'l'; skip_next=yes;; \ |
| -*l?*) strip_trailopt 'l';; \ |
| -[dEDm]) skip_next=yes;; \ |
| -[JT]) skip_next=yes;; \ |
| esac; \ |
| case $$flg in \ |
| *$$target_option*) has_opt=yes; break;; \ |
| esac; \ |
| done; \ |
| test $$has_opt = yes |
| am__make_dryrun = (target_option=n; $(am__make_running_with_option)) |
| am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) |
| pkgdatadir = $(datadir)/@PACKAGE@ |
| pkgincludedir = $(includedir)/@PACKAGE@ |
| pkglibdir = $(libdir)/@PACKAGE@ |
| pkglibexecdir = $(libexecdir)/@PACKAGE@ |
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd |
| install_sh_DATA = $(install_sh) -c -m 644 |
| install_sh_PROGRAM = $(install_sh) -c |
| install_sh_SCRIPT = $(install_sh) -c |
| INSTALL_HEADER = $(INSTALL_DATA) |
| transform = $(program_transform_name) |
| NORMAL_INSTALL = : |
| PRE_INSTALL = : |
| POST_INSTALL = : |
| NORMAL_UNINSTALL = : |
| PRE_UNINSTALL = : |
| POST_UNINSTALL = : |
| build_triplet = @build@ |
| host_triplet = @host@ |
| bin_PROGRAMS = make$(EXEEXT) |
| # Only process if target is MS-Windows |
| @WINDOWSENV_TRUE@am__append_1 = $(W32LIB) |
| # Only process if target is MS-Windows |
| @WINDOWSENV_TRUE@am__append_2 = $(W32INC) |
| check_PROGRAMS = loadavg$(EXEEXT) |
| subdir = . |
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 |
| am__aclocal_m4_deps = $(top_srcdir)/config/dospaths.m4 \ |
| $(top_srcdir)/config/gettext.m4 $(top_srcdir)/config/iconv.m4 \ |
| $(top_srcdir)/config/intlmacosx.m4 \ |
| $(top_srcdir)/config/lib-ld.m4 \ |
| $(top_srcdir)/config/lib-link.m4 \ |
| $(top_srcdir)/config/lib-prefix.m4 \ |
| $(top_srcdir)/config/longlong.m4 $(top_srcdir)/config/nls.m4 \ |
| $(top_srcdir)/config/po.m4 $(top_srcdir)/config/progtest.m4 \ |
| $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac |
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ |
| $(ACLOCAL_M4) |
| DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ |
| $(am__configure_deps) $(include_HEADERS) $(noinst_HEADERS) \ |
| $(am__DIST_COMMON) |
| am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ |
| configure.lineno config.status.lineno |
| mkinstalldirs = $(install_sh) -d |
| CONFIG_HEADER = config.h |
| CONFIG_CLEAN_FILES = tests/config-flags.pm |
| CONFIG_CLEAN_VPATH_FILES = |
| am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" \ |
| "$(DESTDIR)$(includedir)" |
| PROGRAMS = $(bin_PROGRAMS) |
| nodist_loadavg_OBJECTS = loadavg-getloadavg.$(OBJEXT) |
| loadavg_OBJECTS = $(nodist_loadavg_OBJECTS) |
| loadavg_DEPENDENCIES = |
| am__make_SOURCES_DIST = ar.c arscan.c commands.c default.c dir.c \ |
| expand.c file.c function.c getopt.c getopt1.c guile.c \ |
| implicit.c job.c load.c loadapi.c main.c misc.c posixos.c \ |
| output.c read.c remake.c rule.c signame.c strcache.c \ |
| variable.c version.c vpath.c hash.c remote-stub.c \ |
| remote-cstms.c |
| @WINDOWSENV_FALSE@am__objects_1 = posixos.$(OBJEXT) |
| @USE_CUSTOMS_FALSE@am__objects_2 = remote-stub.$(OBJEXT) |
| @USE_CUSTOMS_TRUE@am__objects_2 = remote-cstms.$(OBJEXT) |
| am_make_OBJECTS = ar.$(OBJEXT) arscan.$(OBJEXT) commands.$(OBJEXT) \ |
| default.$(OBJEXT) dir.$(OBJEXT) expand.$(OBJEXT) \ |
| file.$(OBJEXT) function.$(OBJEXT) getopt.$(OBJEXT) \ |
| getopt1.$(OBJEXT) guile.$(OBJEXT) implicit.$(OBJEXT) \ |
| job.$(OBJEXT) load.$(OBJEXT) loadapi.$(OBJEXT) main.$(OBJEXT) \ |
| misc.$(OBJEXT) $(am__objects_1) output.$(OBJEXT) \ |
| read.$(OBJEXT) remake.$(OBJEXT) rule.$(OBJEXT) \ |
| signame.$(OBJEXT) strcache.$(OBJEXT) variable.$(OBJEXT) \ |
| version.$(OBJEXT) vpath.$(OBJEXT) hash.$(OBJEXT) \ |
| $(am__objects_2) |
| make_OBJECTS = $(am_make_OBJECTS) |
| am__DEPENDENCIES_1 = |
| @WINDOWSENV_TRUE@am__DEPENDENCIES_2 = $(am__DEPENDENCIES_1) |
| make_DEPENDENCIES = @LIBOBJS@ @ALLOCA@ $(am__DEPENDENCIES_1) \ |
| $(am__DEPENDENCIES_1) $(am__DEPENDENCIES_2) |
| AM_V_P = $(am__v_P_@AM_V@) |
| am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) |
| am__v_P_0 = false |
| am__v_P_1 = : |
| AM_V_GEN = $(am__v_GEN_@AM_V@) |
| am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) |
| am__v_GEN_0 = @echo " GEN " $@; |
| am__v_GEN_1 = |
| AM_V_at = $(am__v_at_@AM_V@) |
| am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) |
| am__v_at_0 = @ |
| am__v_at_1 = |
| DEFAULT_INCLUDES = -I.@am__isrc@ |
| depcomp = $(SHELL) $(top_srcdir)/config/depcomp |
| am__depfiles_maybe = depfiles |
| am__mv = mv -f |
| AM_V_lt = $(am__v_lt_@AM_V@) |
| am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@) |
| am__v_lt_0 = --silent |
| am__v_lt_1 = |
| COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ |
| $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) |
| AM_V_CC = $(am__v_CC_@AM_V@) |
| am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@) |
| am__v_CC_0 = @echo " CC " $@; |
| am__v_CC_1 = |
| CCLD = $(CC) |
| LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ |
| AM_V_CCLD = $(am__v_CCLD_@AM_V@) |
| am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@) |
| am__v_CCLD_0 = @echo " CCLD " $@; |
| am__v_CCLD_1 = |
| SOURCES = $(nodist_loadavg_SOURCES) $(make_SOURCES) \ |
| $(EXTRA_make_SOURCES) |
| DIST_SOURCES = $(am__make_SOURCES_DIST) $(EXTRA_make_SOURCES) |
| RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ |
| ctags-recursive dvi-recursive html-recursive info-recursive \ |
| install-data-recursive install-dvi-recursive \ |
| install-exec-recursive install-html-recursive \ |
| install-info-recursive install-pdf-recursive \ |
| install-ps-recursive install-recursive installcheck-recursive \ |
| installdirs-recursive pdf-recursive ps-recursive \ |
| tags-recursive uninstall-recursive |
| am__can_run_installinfo = \ |
| case $$AM_UPDATE_INFO_DIR in \ |
| n|no|NO) false;; \ |
| *) (install-info --version) >/dev/null 2>&1;; \ |
| esac |
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; |
| am__vpath_adj = case $$p in \ |
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ |
| *) f=$$p;; \ |
| esac; |
| am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; |
| am__install_max = 40 |
| am__nobase_strip_setup = \ |
| srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` |
| am__nobase_strip = \ |
| for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" |
| am__nobase_list = $(am__nobase_strip_setup); \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ |
| $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ |
| if (++n[$$2] == $(am__install_max)) \ |
| { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ |
| END { for (dir in files) print dir, files[dir] }' |
| am__base_list = \ |
| sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ |
| sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' |
| am__uninstall_files_from_dir = { \ |
| test -z "$$files" \ |
| || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ |
| || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ |
| $(am__cd) "$$dir" && rm -f $$files; }; \ |
| } |
| man1dir = $(mandir)/man1 |
| NROFF = nroff |
| MANS = $(man_MANS) |
| HEADERS = $(include_HEADERS) $(noinst_HEADERS) |
| RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ |
| distclean-recursive maintainer-clean-recursive |
| am__recursive_targets = \ |
| $(RECURSIVE_TARGETS) \ |
| $(RECURSIVE_CLEAN_TARGETS) \ |
| $(am__extra_recursive_targets) |
| AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ |
| cscope distdir dist dist-all distcheck |
| am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \ |
| $(LISP)config.h.in |
| # Read a list of newline-separated strings from the standard input, |
| # and print each of them once, without duplicates. Input order is |
| # *not* preserved. |
| am__uniquify_input = $(AWK) '\ |
| BEGIN { nonempty = 0; } \ |
| { items[$$0] = 1; nonempty = 1; } \ |
| END { if (nonempty) { for (i in items) print i; }; } \ |
| ' |
| # Make sure the list of sources is unique. This is necessary because, |
| # e.g., the same source file might be shared among _SOURCES variables |
| # for different programs/libraries. |
| am__define_uniq_tagged_files = \ |
| list='$(am__tagged_files)'; \ |
| unique=`for i in $$list; do \ |
| if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ |
| done | $(am__uniquify_input)` |
| ETAGS = etags |
| CTAGS = ctags |
| CSCOPE = cscope |
| DIST_SUBDIRS = glob config po doc w32 |
| am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \ |
| $(top_srcdir)/config/ar-lib $(top_srcdir)/config/compile \ |
| $(top_srcdir)/config/config.guess \ |
| $(top_srcdir)/config/config.rpath \ |
| $(top_srcdir)/config/config.sub $(top_srcdir)/config/depcomp \ |
| $(top_srcdir)/config/install-sh $(top_srcdir)/config/missing \ |
| $(top_srcdir)/tests/config-flags.pm.in ABOUT-NLS AUTHORS \ |
| COPYING INSTALL NEWS README alloca.c getloadavg.c |
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) |
| distdir = $(PACKAGE)-$(VERSION) |
| top_distdir = $(distdir) |
| am__remove_distdir = \ |
| if test -d "$(distdir)"; then \ |
| find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ |
| && rm -rf "$(distdir)" \ |
| || { sleep 5 && rm -rf "$(distdir)"; }; \ |
| else :; fi |
| am__post_remove_distdir = $(am__remove_distdir) |
| am__relativize = \ |
| dir0=`pwd`; \ |
| sed_first='s,^\([^/]*\)/.*$$,\1,'; \ |
| sed_rest='s,^[^/]*/*,,'; \ |
| sed_last='s,^.*/\([^/]*\)$$,\1,'; \ |
| sed_butlast='s,/*[^/]*$$,,'; \ |
| while test -n "$$dir1"; do \ |
| first=`echo "$$dir1" | sed -e "$$sed_first"`; \ |
| if test "$$first" != "."; then \ |
| if test "$$first" = ".."; then \ |
| dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ |
| dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ |
| else \ |
| first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ |
| if test "$$first2" = "$$first"; then \ |
| dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ |
| else \ |
| dir2="../$$dir2"; \ |
| fi; \ |
| dir0="$$dir0"/"$$first"; \ |
| fi; \ |
| fi; \ |
| dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ |
| done; \ |
| reldir="$$dir2" |
| DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 |
| GZIP_ENV = --best |
| DIST_TARGETS = dist-bzip2 dist-gzip |
| distuninstallcheck_listfiles = find . -type f -print |
| am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ |
| | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' |
| distcleancheck_listfiles = find . -type f -print |
| ACLOCAL = @ACLOCAL@ |
| ALLOCA = @ALLOCA@ |
| AMTAR = @AMTAR@ |
| AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ |
| AM_LDFLAGS = @AM_LDFLAGS@ |
| AR = @AR@ |
| AUTOCONF = @AUTOCONF@ |
| AUTOHEADER = @AUTOHEADER@ |
| AUTOMAKE = @AUTOMAKE@ |
| AWK = @AWK@ |
| CC = @CC@ |
| CCDEPMODE = @CCDEPMODE@ |
| CFLAGS = @CFLAGS@ |
| CPP = @CPP@ |
| CPPFLAGS = @CPPFLAGS@ |
| CYGPATH_W = @CYGPATH_W@ |
| DEFS = -DLOCALEDIR=\"$(localedir)\" -DLIBDIR=\"$(libdir)\" -DINCLUDEDIR=\"$(includedir)\" @DEFS@ |
| DEPDIR = @DEPDIR@ |
| ECHO_C = @ECHO_C@ |
| ECHO_N = @ECHO_N@ |
| ECHO_T = @ECHO_T@ |
| EGREP = @EGREP@ |
| EXEEXT = @EXEEXT@ |
| GETLOADAVG_LIBS = @GETLOADAVG_LIBS@ |
| GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@ |
| GLOBINC = @GLOBINC@ |
| GLOBLIB = @GLOBLIB@ |
| GMSGFMT = @GMSGFMT@ |
| GMSGFMT_015 = @GMSGFMT_015@ |
| GREP = @GREP@ |
| GUILE_CFLAGS = @GUILE_CFLAGS@ |
| GUILE_LIBS = @GUILE_LIBS@ |
| INSTALL = @INSTALL@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ |
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ |
| INTLLIBS = @INTLLIBS@ |
| INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@ |
| KMEM_GROUP = @KMEM_GROUP@ |
| LDFLAGS = @LDFLAGS@ |
| LIBICONV = @LIBICONV@ |
| LIBINTL = @LIBINTL@ |
| LIBOBJS = @LIBOBJS@ |
| LIBS = @LIBS@ |
| LTLIBICONV = @LTLIBICONV@ |
| LTLIBINTL = @LTLIBINTL@ |
| LTLIBOBJS = @LTLIBOBJS@ |
| MAKEINFO = @MAKEINFO@ |
| MAKE_HOST = @MAKE_HOST@ |
| MKDIR_P = @MKDIR_P@ |
| MSGFMT = @MSGFMT@ |
| MSGFMT_015 = @MSGFMT_015@ |
| MSGMERGE = @MSGMERGE@ |
| NEED_SETGID = @NEED_SETGID@ |
| OBJEXT = @OBJEXT@ |
| PACKAGE = @PACKAGE@ |
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ |
| PACKAGE_NAME = @PACKAGE_NAME@ |
| PACKAGE_STRING = @PACKAGE_STRING@ |
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ |
| PACKAGE_URL = @PACKAGE_URL@ |
| PACKAGE_VERSION = @PACKAGE_VERSION@ |
| PATH_SEPARATOR = @PATH_SEPARATOR@ |
| PERL = @PERL@ |
| PKG_CONFIG = @PKG_CONFIG@ |
| PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@ |
| PKG_CONFIG_PATH = @PKG_CONFIG_PATH@ |
| POSUB = @POSUB@ |
| RANLIB = @RANLIB@ |
| REMOTE = @REMOTE@ |
| SED = @SED@ |
| SET_MAKE = @SET_MAKE@ |
| SHELL = @SHELL@ |
| STRIP = @STRIP@ |
| USE_NLS = @USE_NLS@ |
| VERSION = @VERSION@ |
| XGETTEXT = @XGETTEXT@ |
| XGETTEXT_015 = @XGETTEXT_015@ |
| XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@ |
| abs_builddir = @abs_builddir@ |
| abs_srcdir = @abs_srcdir@ |
| abs_top_builddir = @abs_top_builddir@ |
| abs_top_srcdir = @abs_top_srcdir@ |
| ac_ct_AR = @ac_ct_AR@ |
| ac_ct_CC = @ac_ct_CC@ |
| am__include = @am__include@ |
| am__leading_dot = @am__leading_dot@ |
| am__quote = @am__quote@ |
| am__tar = @am__tar@ |
| am__untar = @am__untar@ |
| bindir = @bindir@ |
| build = @build@ |
| build_alias = @build_alias@ |
| build_cpu = @build_cpu@ |
| build_os = @build_os@ |
| build_vendor = @build_vendor@ |
| builddir = @builddir@ |
| datadir = @datadir@ |
| datarootdir = @datarootdir@ |
| docdir = @docdir@ |
| dvidir = @dvidir@ |
| exec_prefix = @exec_prefix@ |
| host = @host@ |
| host_alias = @host_alias@ |
| host_cpu = @host_cpu@ |
| host_os = @host_os@ |
| host_vendor = @host_vendor@ |
| htmldir = @htmldir@ |
| includedir = @includedir@ |
| infodir = @infodir@ |
| install_sh = @install_sh@ |
| libdir = @libdir@ |
| libexecdir = @libexecdir@ |
| |
| # --------------- Internationalization Section |
| localedir = $(datadir)/locale |
| localstatedir = @localstatedir@ |
| mandir = @mandir@ |
| mkdir_p = @mkdir_p@ |
| oldincludedir = @oldincludedir@ |
| pdfdir = @pdfdir@ |
| prefix = @prefix@ |
| program_transform_name = @program_transform_name@ |
| psdir = @psdir@ |
| sbindir = @sbindir@ |
| sharedstatedir = @sharedstatedir@ |
| srcdir = @srcdir@ |
| sysconfdir = @sysconfdir@ |
| target_alias = @target_alias@ |
| top_build_prefix = @top_build_prefix@ |
| top_builddir = @top_builddir@ |
| top_srcdir = @top_srcdir@ |
| AUTOMAKE_OPTIONS = dist-bzip2 silent-rules std-options |
| ACLOCAL_AMFLAGS = -I config |
| |
| # Only process if target is MS-Windows |
| @WINDOWSENV_TRUE@MAYBE_W32 = w32 |
| @WINDOWSENV_TRUE@W32INC = -I $(top_srcdir)/w32/include |
| @WINDOWSENV_TRUE@W32LIB = -Lw32 -lw32 |
| @WINDOWSENV_FALSE@ossrc = posixos.c |
| @WINDOWSENV_TRUE@ossrc = |
| SUBDIRS = glob config po doc $(MAYBE_W32) |
| include_HEADERS = gnumake.h |
| @USE_CUSTOMS_FALSE@remote = remote-stub.c |
| @USE_CUSTOMS_TRUE@remote = remote-cstms.c |
| make_SOURCES = ar.c arscan.c commands.c default.c dir.c expand.c file.c \ |
| function.c getopt.c getopt1.c guile.c implicit.c job.c load.c \ |
| loadapi.c main.c misc.c $(ossrc) output.c read.c remake.c \ |
| rule.c signame.c strcache.c variable.c version.c vpath.c \ |
| hash.c $(remote) |
| |
| EXTRA_make_SOURCES = vmsjobs.c remote-stub.c remote-cstms.c |
| noinst_HEADERS = commands.h dep.h filedef.h job.h makeint.h rule.h variable.h \ |
| debug.h getopt.h gettext.h hash.h output.h os.h |
| |
| make_LDADD = @LIBOBJS@ @ALLOCA@ $(GLOBLIB) @GETLOADAVG_LIBS@ @LIBINTL@ \ |
| $(GUILE_LIBS) $(am__append_1) |
| man_MANS = make.1 |
| AM_CPPFLAGS = $(GLOBINC) $(am__append_2) |
| AM_CFLAGS = $(GUILE_CFLAGS) |
| |
| # Extra stuff to include in the distribution. |
| EXTRA_DIST = ChangeLog README build.sh.in $(man_MANS) \ |
| README.customs README.OS2 \ |
| SCOPTIONS SMakefile \ |
| README.Amiga Makefile.ami config.ami make.lnk amiga.c amiga.h \ |
| README.DOS Makefile.DOS configure.bat dosbuild.bat configh.dos\ |
| README.W32 NMakefile config.h.W32 build_w32.bat subproc.bat \ |
| make_msvc_net2003.sln make_msvc_net2003.vcproj \ |
| README.VMS makefile.vms makefile.com config.h-vms \ |
| vmsdir.h vmsfunctions.c vmsify.c vms_exit.c vms_progname.c \ |
| vms_export_symbol.c vms_export_symbol_test.com \ |
| gmk-default.scm gmk-default.h |
| |
| |
| # This is built during configure, but behind configure's back |
| DISTCLEANFILES = build.sh |
| |
| # --------------- Local INSTALL Section |
| |
| # If necessary, change the gid of the app and turn on the setgid flag. |
| # |
| |
| # Whether or not make needs to be installed setgid. |
| # The value should be either 'true' or 'false'. |
| # On many systems, the getloadavg function (used to implement the '-l' |
| # switch) will not work unless make is installed setgid kmem. |
| # |
| inst_setgid = @NEED_SETGID@ |
| |
| # Install make setgid to this group so it can get the load average. |
| # |
| inst_group = @KMEM_GROUP@ |
| nodist_loadavg_SOURCES = getloadavg.c |
| loadavg_CPPFLAGS = -DTEST |
| loadavg_LDADD = @GETLOADAVG_LIBS@ |
| |
| # > check-regression |
| # |
| # Look for the make test suite, and run it if found and we can find perl. |
| # If we're building outside the tree, we use symlinks to make a local copy of |
| # the test suite. Unfortunately the test suite itself isn't localizable yet. |
| # |
| MAKETESTFLAGS = |
| all: config.h |
| $(MAKE) $(AM_MAKEFLAGS) all-recursive |
| |
| .SUFFIXES: |
| .SUFFIXES: .c .o .obj |
| am--refresh: Makefile |
| @: |
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) |
| @for dep in $?; do \ |
| case '$(am__configure_deps)' in \ |
| *$$dep*) \ |
| echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \ |
| $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \ |
| && exit 0; \ |
| exit 1;; \ |
| esac; \ |
| done; \ |
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ |
| $(am__cd) $(top_srcdir) && \ |
| $(AUTOMAKE) --foreign Makefile |
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status |
| @case '$?' in \ |
| *config.status*) \ |
| echo ' $(SHELL) ./config.status'; \ |
| $(SHELL) ./config.status;; \ |
| *) \ |
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ |
| cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ |
| esac; |
| |
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) |
| $(SHELL) ./config.status --recheck |
| |
| $(top_srcdir)/configure: $(am__configure_deps) |
| $(am__cd) $(srcdir) && $(AUTOCONF) |
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) |
| $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) |
| $(am__aclocal_m4_deps): |
| |
| config.h: stamp-h1 |
| @test -f $@ || rm -f stamp-h1 |
| @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1 |
| |
| stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status |
| @rm -f stamp-h1 |
| cd $(top_builddir) && $(SHELL) ./config.status config.h |
| $(srcdir)/config.h.in: $(am__configure_deps) |
| ($(am__cd) $(top_srcdir) && $(AUTOHEADER)) |
| rm -f stamp-h1 |
| touch $@ |
| |
| distclean-hdr: |
| -rm -f config.h stamp-h1 |
| tests/config-flags.pm: $(top_builddir)/config.status $(top_srcdir)/tests/config-flags.pm.in |
| cd $(top_builddir) && $(SHELL) ./config.status $@ |
| install-binPROGRAMS: $(bin_PROGRAMS) |
| @$(NORMAL_INSTALL) |
| @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do echo "$$p $$p"; done | \ |
| sed 's/$(EXEEXT)$$//' | \ |
| while read p p1; do if test -f $$p \ |
| ; then echo "$$p"; echo "$$p"; else :; fi; \ |
| done | \ |
| sed -e 'p;s,.*/,,;n;h' \ |
| -e 's|.*|.|' \ |
| -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \ |
| sed 'N;N;N;s,\n, ,g' | \ |
| $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \ |
| { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \ |
| if ($$2 == $$4) files[d] = files[d] " " $$1; \ |
| else { print "f", $$3 "/" $$4, $$1; } } \ |
| END { for (d in files) print "f", d, files[d] }' | \ |
| while read type dir files; do \ |
| if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \ |
| $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \ |
| } \ |
| ; done |
| |
| uninstall-binPROGRAMS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \ |
| files=`for p in $$list; do echo "$$p"; done | \ |
| sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \ |
| -e 's/$$/$(EXEEXT)/' \ |
| `; \ |
| test -n "$$list" || exit 0; \ |
| echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \ |
| cd "$(DESTDIR)$(bindir)" && rm -f $$files |
| |
| clean-binPROGRAMS: |
| -test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS) |
| |
| installcheck-binPROGRAMS: $(bin_PROGRAMS) |
| bad=0; pid=$$$$; list="$(bin_PROGRAMS)"; for p in $$list; do \ |
| case ' $(AM_INSTALLCHECK_STD_OPTIONS_EXEMPT) ' in \ |
| *" $$p "* | *" $(srcdir)/$$p "*) continue;; \ |
| esac; \ |
| f=`echo "$$p" | \ |
| sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ |
| for opt in --help --version; do \ |
| if "$(DESTDIR)$(bindir)/$$f" $$opt >c$${pid}_.out \ |
| 2>c$${pid}_.err </dev/null \ |
| && test -n "`cat c$${pid}_.out`" \ |
| && test -z "`cat c$${pid}_.err`"; then :; \ |
| else echo "$$f does not support $$opt" 1>&2; bad=1; fi; \ |
| done; \ |
| done; rm -f c$${pid}_.???; exit $$bad |
| |
| clean-checkPROGRAMS: |
| -test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS) |
| |
| loadavg$(EXEEXT): $(loadavg_OBJECTS) $(loadavg_DEPENDENCIES) $(EXTRA_loadavg_DEPENDENCIES) |
| @rm -f loadavg$(EXEEXT) |
| $(AM_V_CCLD)$(LINK) $(loadavg_OBJECTS) $(loadavg_LDADD) $(LIBS) |
| |
| make$(EXEEXT): $(make_OBJECTS) $(make_DEPENDENCIES) $(EXTRA_make_DEPENDENCIES) |
| @rm -f make$(EXEEXT) |
| $(AM_V_CCLD)$(LINK) $(make_OBJECTS) $(make_LDADD) $(LIBS) |
| |
| mostlyclean-compile: |
| -rm -f *.$(OBJEXT) |
| |
| distclean-compile: |
| -rm -f *.tab.c |
| |
| @AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/alloca.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@$(DEPDIR)/getloadavg.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ar.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arscan.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/commands.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/default.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dir.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/expand.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/function.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/getopt1.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/guile.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hash.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/implicit.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/job.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/load.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loadapi.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/loadavg-getloadavg.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/output.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/posixos.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remake.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remote-cstms.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/remote-stub.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/rule.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/signame.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strcache.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/variable.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/version.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vmsjobs.Po@am__quote@ |
| @AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vpath.Po@am__quote@ |
| |
| .c.o: |
| @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< |
| @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $< |
| |
| .c.obj: |
| @am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` |
| @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'` |
| |
| loadavg-getloadavg.o: getloadavg.c |
| @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT loadavg-getloadavg.o -MD -MP -MF $(DEPDIR)/loadavg-getloadavg.Tpo -c -o loadavg-getloadavg.o `test -f 'getloadavg.c' || echo '$(srcdir)/'`getloadavg.c |
| @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/loadavg-getloadavg.Tpo $(DEPDIR)/loadavg-getloadavg.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='getloadavg.c' object='loadavg-getloadavg.o' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o loadavg-getloadavg.o `test -f 'getloadavg.c' || echo '$(srcdir)/'`getloadavg.c |
| |
| loadavg-getloadavg.obj: getloadavg.c |
| @am__fastdepCC_TRUE@ $(AM_V_CC)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -MT loadavg-getloadavg.obj -MD -MP -MF $(DEPDIR)/loadavg-getloadavg.Tpo -c -o loadavg-getloadavg.obj `if test -f 'getloadavg.c'; then $(CYGPATH_W) 'getloadavg.c'; else $(CYGPATH_W) '$(srcdir)/getloadavg.c'; fi` |
| @am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/loadavg-getloadavg.Tpo $(DEPDIR)/loadavg-getloadavg.Po |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='getloadavg.c' object='loadavg-getloadavg.obj' libtool=no @AMDEPBACKSLASH@ |
| @AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ |
| @am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(loadavg_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) -c -o loadavg-getloadavg.obj `if test -f 'getloadavg.c'; then $(CYGPATH_W) 'getloadavg.c'; else $(CYGPATH_W) '$(srcdir)/getloadavg.c'; fi` |
| install-man1: $(man_MANS) |
| @$(NORMAL_INSTALL) |
| @list1=''; \ |
| list2='$(man_MANS)'; \ |
| test -n "$(man1dir)" \ |
| && test -n "`echo $$list1$$list2`" \ |
| || exit 0; \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \ |
| { for i in $$list1; do echo "$$i"; done; \ |
| if test -n "$$list2"; then \ |
| for i in $$list2; do echo "$$i"; done \ |
| | sed -n '/\.1[a-z]*$$/p'; \ |
| fi; \ |
| } | while read p; do \ |
| if test -f $$p; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; echo "$$p"; \ |
| done | \ |
| sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ |
| -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \ |
| sed 'N;N;s,\n, ,g' | { \ |
| list=; while read file base inst; do \ |
| if test "$$base" = "$$inst"; then list="$$list $$file"; else \ |
| echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \ |
| $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \ |
| fi; \ |
| done; \ |
| for i in $$list; do echo "$$i"; done | $(am__base_list) | \ |
| while read files; do \ |
| test -z "$$files" || { \ |
| echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \ |
| $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \ |
| done; } |
| |
| uninstall-man1: |
| @$(NORMAL_UNINSTALL) |
| @list=''; test -n "$(man1dir)" || exit 0; \ |
| files=`{ for i in $$list; do echo "$$i"; done; \ |
| l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \ |
| sed -n '/\.1[a-z]*$$/p'; \ |
| } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \ |
| -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \ |
| dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir) |
| install-includeHEADERS: $(include_HEADERS) |
| @$(NORMAL_INSTALL) |
| @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ |
| if test -n "$$list"; then \ |
| echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \ |
| $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \ |
| fi; \ |
| for p in $$list; do \ |
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ |
| echo "$$d$$p"; \ |
| done | $(am__base_list) | \ |
| while read files; do \ |
| echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \ |
| $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \ |
| done |
| |
| uninstall-includeHEADERS: |
| @$(NORMAL_UNINSTALL) |
| @list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \ |
| files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ |
| dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir) |
| |
| # This directory's subdirectories are mostly independent; you can cd |
| # into them and run 'make' without going through this Makefile. |
| # To change the values of 'make' variables: instead of editing Makefiles, |
| # (1) if the variable is set in 'config.status', edit 'config.status' |
| # (which will cause the Makefiles to be regenerated when you run 'make'); |
| # (2) otherwise, pass the desired values on the 'make' command line. |
| $(am__recursive_targets): |
| @fail=; \ |
| if $(am__make_keepgoing); then \ |
| failcom='fail=yes'; \ |
| else \ |
| failcom='exit 1'; \ |
| fi; \ |
| dot_seen=no; \ |
| target=`echo $@ | sed s/-recursive//`; \ |
| case "$@" in \ |
| distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ |
| *) list='$(SUBDIRS)' ;; \ |
| esac; \ |
| for subdir in $$list; do \ |
| echo "Making $$target in $$subdir"; \ |
| if test "$$subdir" = "."; then \ |
| dot_seen=yes; \ |
| local_target="$$target-am"; \ |
| else \ |
| local_target="$$target"; \ |
| fi; \ |
| ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ |
| || eval $$failcom; \ |
| done; \ |
| if test "$$dot_seen" = "no"; then \ |
| $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ |
| fi; test -z "$$fail" |
| |
| ID: $(am__tagged_files) |
| $(am__define_uniq_tagged_files); mkid -fID $$unique |
| tags: tags-recursive |
| TAGS: tags |
| |
| tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| set x; \ |
| here=`pwd`; \ |
| if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ |
| include_option=--etags-include; \ |
| empty_fix=.; \ |
| else \ |
| include_option=--include; \ |
| empty_fix=; \ |
| fi; \ |
| list='$(SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| test ! -f $$subdir/TAGS || \ |
| set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ |
| fi; \ |
| done; \ |
| $(am__define_uniq_tagged_files); \ |
| shift; \ |
| if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ |
| test -n "$$unique" || unique=$$empty_fix; \ |
| if test $$# -gt 0; then \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| "$$@" $$unique; \ |
| else \ |
| $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ |
| $$unique; \ |
| fi; \ |
| fi |
| ctags: ctags-recursive |
| |
| CTAGS: ctags |
| ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) |
| $(am__define_uniq_tagged_files); \ |
| test -z "$(CTAGS_ARGS)$$unique" \ |
| || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ |
| $$unique |
| |
| GTAGS: |
| here=`$(am__cd) $(top_builddir) && pwd` \ |
| && $(am__cd) $(top_srcdir) \ |
| && gtags -i $(GTAGS_ARGS) "$$here" |
| cscope: cscope.files |
| test ! -s cscope.files \ |
| || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) |
| clean-cscope: |
| -rm -f cscope.files |
| cscope.files: clean-cscope cscopelist |
| cscopelist: cscopelist-recursive |
| |
| cscopelist-am: $(am__tagged_files) |
| list='$(am__tagged_files)'; \ |
| case "$(srcdir)" in \ |
| [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ |
| *) sdir=$(subdir)/$(srcdir) ;; \ |
| esac; \ |
| for i in $$list; do \ |
| if test -f "$$i"; then \ |
| echo "$(subdir)/$$i"; \ |
| else \ |
| echo "$$sdir/$$i"; \ |
| fi; \ |
| done >> $(top_builddir)/cscope.files |
| |
| distclean-tags: |
| -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags |
| -rm -f cscope.out cscope.in.out cscope.po.out cscope.files |
| |
| distdir: $(DISTFILES) |
| $(am__remove_distdir) |
| test -d "$(distdir)" || mkdir "$(distdir)" |
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ |
| list='$(DISTFILES)'; \ |
| dist_files=`for file in $$list; do echo $$file; done | \ |
| sed -e "s|^$$srcdirstrip/||;t" \ |
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ |
| case $$dist_files in \ |
| */*) $(MKDIR_P) `echo "$$dist_files" | \ |
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ |
| sort -u` ;; \ |
| esac; \ |
| for file in $$dist_files; do \ |
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ |
| if test -d $$d/$$file; then \ |
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ |
| if test -d "$(distdir)/$$file"; then \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ |
| cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ |
| find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ |
| fi; \ |
| cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ |
| else \ |
| test -f "$(distdir)/$$file" \ |
| || cp -p $$d/$$file "$(distdir)/$$file" \ |
| || exit 1; \ |
| fi; \ |
| done |
| @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ |
| if test "$$subdir" = .; then :; else \ |
| $(am__make_dryrun) \ |
| || test -d "$(distdir)/$$subdir" \ |
| || $(MKDIR_P) "$(distdir)/$$subdir" \ |
| || exit 1; \ |
| dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ |
| $(am__relativize); \ |
| new_distdir=$$reldir; \ |
| dir1=$$subdir; dir2="$(top_distdir)"; \ |
| $(am__relativize); \ |
| new_top_distdir=$$reldir; \ |
| echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ |
| echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ |
| ($(am__cd) $$subdir && \ |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$$new_top_distdir" \ |
| distdir="$$new_distdir" \ |
| am__remove_distdir=: \ |
| am__skip_length_check=: \ |
| am__skip_mode_fix=: \ |
| distdir) \ |
| || exit 1; \ |
| fi; \ |
| done |
| $(MAKE) $(AM_MAKEFLAGS) \ |
| top_distdir="$(top_distdir)" distdir="$(distdir)" \ |
| dist-hook |
| -test -n "$(am__skip_mode_fix)" \ |
| || find "$(distdir)" -type d ! -perm -755 \ |
| -exec chmod u+rwx,go+rx {} \; -o \ |
| ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ |
| ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ |
| || chmod -R a+r "$(distdir)" |
| dist-gzip: distdir |
| tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz |
| $(am__post_remove_distdir) |
| dist-bzip2: distdir |
| tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 |
| $(am__post_remove_distdir) |
| |
| dist-lzip: distdir |
| tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz |
| $(am__post_remove_distdir) |
| |
| dist-xz: distdir |
| tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz |
| $(am__post_remove_distdir) |
| |
| dist-tarZ: distdir |
| @echo WARNING: "Support for distribution archives compressed with" \ |
| "legacy program 'compress' is deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z |
| $(am__post_remove_distdir) |
| |
| dist-shar: distdir |
| @echo WARNING: "Support for shar distribution archives is" \ |
| "deprecated." >&2 |
| @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 |
| shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz |
| $(am__post_remove_distdir) |
| |
| dist-zip: distdir |
| -rm -f $(distdir).zip |
| zip -rq $(distdir).zip $(distdir) |
| $(am__post_remove_distdir) |
| |
| dist dist-all: |
| $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' |
| $(am__post_remove_distdir) |
| |
| # This target untars the dist file and tries a VPATH configuration. Then |
| # it guarantees that the distribution is self-contained by making another |
| # tarfile. |
| distcheck: dist |
| case '$(DIST_ARCHIVES)' in \ |
| *.tar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\ |
| *.tar.bz2*) \ |
| bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ |
| *.tar.lz*) \ |
| lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ |
| *.tar.xz*) \ |
| xz -dc $(distdir).tar.xz | $(am__untar) ;;\ |
| *.tar.Z*) \ |
| uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ |
| *.shar.gz*) \ |
| GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\ |
| *.zip*) \ |
| unzip $(distdir).zip ;;\ |
| esac |
| chmod -R a-w $(distdir) |
| chmod u+w $(distdir) |
| mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst |
| chmod a-w $(distdir) |
| test -d $(distdir)/_build || exit 0; \ |
| dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ |
| && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ |
| && am__cwd=`pwd` \ |
| && $(am__cd) $(distdir)/_build/sub \ |
| && ../../configure \ |
| $(AM_DISTCHECK_CONFIGURE_FLAGS) \ |
| $(DISTCHECK_CONFIGURE_FLAGS) \ |
| --srcdir=../.. --prefix="$$dc_install_base" \ |
| && $(MAKE) $(AM_MAKEFLAGS) \ |
| && $(MAKE) $(AM_MAKEFLAGS) dvi \ |
| && $(MAKE) $(AM_MAKEFLAGS) check \ |
| && $(MAKE) $(AM_MAKEFLAGS) install \ |
| && $(MAKE) $(AM_MAKEFLAGS) installcheck \ |
| && $(MAKE) $(AM_MAKEFLAGS) uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ |
| distuninstallcheck \ |
| && chmod -R a-w "$$dc_install_base" \ |
| && ({ \ |
| (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ |
| && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ |
| distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ |
| } || { rm -rf "$$dc_destdir"; exit 1; }) \ |
| && rm -rf "$$dc_destdir" \ |
| && $(MAKE) $(AM_MAKEFLAGS) dist \ |
| && rm -rf $(DIST_ARCHIVES) \ |
| && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ |
| && cd "$$am__cwd" \ |
| || exit 1 |
| $(am__post_remove_distdir) |
| @(echo "$(distdir) archives ready for distribution: "; \ |
| list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ |
| sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' |
| distuninstallcheck: |
| @test -n '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: trying to run $@ with an empty' \ |
| '$$(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| $(am__cd) '$(distuninstallcheck_dir)' || { \ |
| echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ |
| exit 1; \ |
| }; \ |
| test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left after uninstall:" ; \ |
| if test -n "$(DESTDIR)"; then \ |
| echo " (check DESTDIR support)"; \ |
| fi ; \ |
| $(distuninstallcheck_listfiles) ; \ |
| exit 1; } >&2 |
| distcleancheck: distclean |
| @if test '$(srcdir)' = . ; then \ |
| echo "ERROR: distcleancheck can only run from a VPATH build" ; \ |
| exit 1 ; \ |
| fi |
| @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ |
| || { echo "ERROR: files left in build directory after distclean:" ; \ |
| $(distcleancheck_listfiles) ; \ |
| exit 1; } >&2 |
| check-am: all-am |
| $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS) |
| $(MAKE) $(AM_MAKEFLAGS) check-local |
| check: check-recursive |
| all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) config.h |
| installdirs: installdirs-recursive |
| installdirs-am: |
| for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \ |
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ |
| done |
| install: install-recursive |
| install-exec: install-exec-recursive |
| install-data: install-data-recursive |
| uninstall: uninstall-recursive |
| |
| install-am: all-am |
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am |
| |
| installcheck: installcheck-recursive |
| install-strip: |
| if test -z '$(STRIP)'; then \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| install; \ |
| else \ |
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ |
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ |
| "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ |
| fi |
| mostlyclean-generic: |
| |
| clean-generic: |
| |
| distclean-generic: |
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) |
| -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) |
| -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) |
| |
| maintainer-clean-generic: |
| @echo "This command is intended for maintainers to use" |
| @echo "it deletes files that may require special tools to rebuild." |
| clean: clean-recursive |
| |
| clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \ |
| mostlyclean-am |
| |
| distclean: distclean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(DEPDIR) ./$(DEPDIR) |
| -rm -f Makefile |
| distclean-am: clean-am distclean-compile distclean-generic \ |
| distclean-hdr distclean-tags |
| |
| dvi: dvi-recursive |
| |
| dvi-am: |
| |
| html: html-recursive |
| |
| html-am: |
| |
| info: info-recursive |
| |
| info-am: |
| |
| install-data-am: install-includeHEADERS install-man |
| |
| install-dvi: install-dvi-recursive |
| |
| install-dvi-am: |
| |
| install-exec-am: install-binPROGRAMS install-exec-local |
| |
| install-html: install-html-recursive |
| |
| install-html-am: |
| |
| install-info: install-info-recursive |
| |
| install-info-am: |
| |
| install-man: install-man1 |
| |
| install-pdf: install-pdf-recursive |
| |
| install-pdf-am: |
| |
| install-ps: install-ps-recursive |
| |
| install-ps-am: |
| |
| installcheck-am: installcheck-binPROGRAMS |
| |
| maintainer-clean: maintainer-clean-recursive |
| -rm -f $(am__CONFIG_DISTCLEAN_FILES) |
| -rm -rf $(top_srcdir)/autom4te.cache |
| -rm -rf $(DEPDIR) ./$(DEPDIR) |
| -rm -f Makefile |
| maintainer-clean-am: distclean-am maintainer-clean-generic |
| |
| mostlyclean: mostlyclean-recursive |
| |
| mostlyclean-am: mostlyclean-compile mostlyclean-generic |
| |
| pdf: pdf-recursive |
| |
| pdf-am: |
| |
| ps: ps-recursive |
| |
| ps-am: |
| |
| uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \ |
| uninstall-man |
| |
| uninstall-man: uninstall-man1 |
| |
| .MAKE: $(am__recursive_targets) all check-am install-am install-strip |
| |
| .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ |
| am--refresh check check-am check-local clean clean-binPROGRAMS \ |
| clean-checkPROGRAMS clean-cscope clean-generic cscope \ |
| cscopelist-am ctags ctags-am dist dist-all dist-bzip2 \ |
| dist-gzip dist-hook dist-lzip dist-shar dist-tarZ dist-xz \ |
| dist-zip distcheck distclean distclean-compile \ |
| distclean-generic distclean-hdr distclean-tags distcleancheck \ |
| distdir distuninstallcheck dvi dvi-am html html-am info \ |
| info-am install install-am install-binPROGRAMS install-data \ |
| install-data-am install-dvi install-dvi-am install-exec \ |
| install-exec-am install-exec-local install-html \ |
| install-html-am install-includeHEADERS install-info \ |
| install-info-am install-man install-man1 install-pdf \ |
| install-pdf-am install-ps install-ps-am install-strip \ |
| installcheck installcheck-am installcheck-binPROGRAMS \ |
| installdirs installdirs-am maintainer-clean \ |
| maintainer-clean-generic mostlyclean mostlyclean-compile \ |
| mostlyclean-generic pdf pdf-am ps ps-am tags tags-am uninstall \ |
| uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \ |
| uninstall-man uninstall-man1 |
| |
| .PRECIOUS: Makefile |
| |
| |
| install-exec-local: |
| @if $(inst_setgid); then \ |
| app=$(DESTDIR)$(bindir)/`echo $(bin_PROGRAMS)|sed '$(transform)'`; \ |
| if chgrp $(inst_group) $$app && chmod g+s $$app; then \ |
| echo "chgrp $(inst_group) $$app && chmod g+s $$app"; \ |
| else \ |
| echo "$$app needs to be owned by group $(inst_group) and setgid;"; \ |
| echo "otherwise the '-l' option will probably not work."; \ |
| echo "You may need special privileges to complete the installation"; \ |
| echo "of $$app."; \ |
| fi; \ |
| else true; fi |
| |
| # --------------- Generate the Guile default module content |
| |
| guile.$(OBJEXT): gmk-default.h |
| gmk-default.h: $(srcdir)/gmk-default.scm |
| (echo 'static const char *const GUILE_module_defn = " '\\ \ |
| && sed -e 's/;.*//' -e '/^[ \t]*$$/d' -e 's/"/\\"/g' -e 's/$$/ \\/' \ |
| $(srcdir)/gmk-default.scm \ |
| && echo '";') > $@ |
| |
| # --------------- Local DIST Section |
| |
| # Install the w32 and tests subdirectories |
| # |
| dist-hook: |
| (cd $(srcdir); \ |
| sub=`find w32 tests -follow \( -name .git -o -name .deps -o -name work -o -name .gitignore -o -name \*.orig -o -name \*.rej -o -name \*~ -o -name Makefile \) -prune -o -type f -print`; \ |
| tar chf - $$sub) \ |
| | (cd $(distdir); tar xfBp -) |
| |
| # --------------- Local CHECK Section |
| |
| check-local: check-regression check-loadavg |
| @banner=" Regression PASSED: GNU Make $(VERSION) ($(MAKE_HOST)) built with $(CC) "; \ |
| dashes=`echo "$$banner" | sed s/./=/g`; \ |
| echo; \ |
| echo "$$dashes"; \ |
| echo "$$banner"; \ |
| echo "$$dashes"; \ |
| echo |
| |
| .PHONY: check-loadavg check-regression |
| |
| check-loadavg: loadavg$(EXEEXT) |
| @echo The system uptime program believes the load average to be: |
| -uptime |
| @echo The GNU load average checking code thinks: |
| -./loadavg$(EXEEXT) |
| |
| check-regression: tests/config-flags.pm |
| @if test -f '$(srcdir)/tests/run_make_tests'; then \ |
| ulimit -n 128; \ |
| if $(PERL) -v >/dev/null 2>&1; then \ |
| case `cd '$(srcdir)'; pwd` in `pwd`) : ;; \ |
| *) test -d tests || mkdir tests; \ |
| rm -f srctests; \ |
| if ln -s '$(srcdir)/tests' srctests; then \ |
| for f in run_make_tests run_make_tests.pl test_driver.pl scripts; do \ |
| rm -f tests/$$f; ln -s ../srctests/$$f tests; \ |
| done; fi ;; \ |
| esac; \ |
| echo "cd tests && $(PERL) ./run_make_tests.pl -srcdir $(abs_srcdir) -make ../make$(EXEEXT) $(MAKETESTFLAGS)"; \ |
| cd tests && $(PERL) ./run_make_tests.pl -srcdir '$(abs_srcdir)' -make '../make$(EXEEXT)' $(MAKETESTFLAGS); \ |
| else \ |
| echo "Can't find a working Perl ($(PERL)); the test suite requires Perl."; \ |
| fi; \ |
| else \ |
| echo "Can't find the GNU Make test suite ($(srcdir)/tests)."; \ |
| fi |
| |
| # --------------- Maintainer's Section |
| |
| # Tell automake that I haven't forgotten about this file and it will be |
| # created before we build a distribution (see maintMakefile in the Git |
| # distribution). |
| |
| README: |
| |
| @MAINT_MAKEFILE@ |
| |
| # Tell versions [3.59,3.63) of GNU make to not export all variables. |
| # Otherwise a system limit (for SysV at least) may be exceeded. |
| .NOEXPORT: |