| /* Copyright (c) 2004-2007, Sara Golemon <sarag@libssh2.org> |
| * Copyright (c) 2009 by Daniel Stenberg |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, |
| * with or without modification, are permitted provided |
| * that the following conditions are met: |
| * |
| * Redistributions of source code must retain the above |
| * copyright notice, this list of conditions and the |
| * following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above |
| * copyright notice, this list of conditions and the following |
| * disclaimer in the documentation and/or other materials |
| * provided with the distribution. |
| * |
| * Neither the name of the copyright holder nor the names |
| * of any other contributors may be used to endorse or |
| * promote products derived from this software without |
| * specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND |
| * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, |
| * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES |
| * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING |
| * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY |
| * OF SUCH DAMAGE. |
| */ |
| |
| #include "libssh2_priv.h" |
| |
| #include <ctype.h> |
| #include <stdio.h> |
| |
| /* Needed for struct iovec on some platforms */ |
| #ifdef HAVE_SYS_UIO_H |
| #include <sys/uio.h> |
| #endif |
| |
| #include "transport.h" |
| |
| /* libssh2_userauth_list |
| * |
| * List authentication methods |
| * Will yield successful login if "none" happens to be allowable for this user |
| * Not a common configuration for any SSH server though |
| * username should be NULL, or a null terminated string |
| */ |
| static char *userauth_list(LIBSSH2_SESSION *session, const char *username, |
| unsigned int username_len) |
| { |
| static const unsigned char reply_codes[3] = |
| { SSH_MSG_USERAUTH_SUCCESS, SSH_MSG_USERAUTH_FAILURE, 0 }; |
| /* packet_type(1) + username_len(4) + service_len(4) + |
| service(14)"ssh-connection" + method_len(4) + method(4)"none" */ |
| unsigned long methods_len; |
| unsigned char *s; |
| int rc; |
| |
| if (session->userauth_list_state == libssh2_NB_state_idle) { |
| /* Zero the whole thing out */ |
| memset(&session->userauth_list_packet_requirev_state, 0, |
| sizeof(session->userauth_list_packet_requirev_state)); |
| |
| session->userauth_list_data_len = username_len + 31; |
| |
| s = session->userauth_list_data = |
| LIBSSH2_ALLOC(session, session->userauth_list_data_len); |
| if (!session->userauth_list_data) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for userauth_list", 0); |
| return NULL; |
| } |
| |
| *(s++) = SSH_MSG_USERAUTH_REQUEST; |
| _libssh2_htonu32(s, username_len); |
| s += 4; |
| if (username) { |
| memcpy(s, username, username_len); |
| s += username_len; |
| } |
| |
| _libssh2_htonu32(s, 14); |
| s += 4; |
| memcpy(s, "ssh-connection", 14); |
| s += 14; |
| |
| _libssh2_htonu32(s, 4); |
| s += 4; |
| memcpy(s, "none", 4); |
| s += 4; |
| |
| session->userauth_list_state = libssh2_NB_state_created; |
| } |
| |
| if (session->userauth_list_state == libssh2_NB_state_created) { |
| rc = _libssh2_transport_write(session, session->userauth_list_data, |
| session->userauth_list_data_len); |
| if (rc == PACKET_EAGAIN) { |
| libssh2_error(session, LIBSSH2_ERROR_EAGAIN, |
| "Would block requesting userauth list", 0); |
| return NULL; |
| } else if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_SOCKET_SEND, |
| "Unable to send userauth-none request", 0); |
| LIBSSH2_FREE(session, session->userauth_list_data); |
| session->userauth_list_data = NULL; |
| session->userauth_list_state = libssh2_NB_state_idle; |
| return NULL; |
| } |
| LIBSSH2_FREE(session, session->userauth_list_data); |
| session->userauth_list_data = NULL; |
| |
| session->userauth_list_state = libssh2_NB_state_sent; |
| } |
| |
| if (session->userauth_list_state == libssh2_NB_state_sent) { |
| rc = _libssh2_packet_requirev(session, reply_codes, |
| &session->userauth_list_data, |
| &session->userauth_list_data_len, 0, |
| NULL, 0, |
| &session->userauth_list_packet_requirev_state); |
| if (rc == PACKET_EAGAIN) { |
| libssh2_error(session, LIBSSH2_ERROR_EAGAIN, |
| "Would block requesting userauth list", 0); |
| return NULL; |
| } else if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_NONE, "No error", 0); |
| session->userauth_list_state = libssh2_NB_state_idle; |
| return NULL; |
| } |
| |
| if (session->userauth_list_data[0] == SSH_MSG_USERAUTH_SUCCESS) { |
| /* Wow, who'dve thought... */ |
| libssh2_error(session, LIBSSH2_ERROR_NONE, "No error", 0); |
| LIBSSH2_FREE(session, session->userauth_list_data); |
| session->userauth_list_data = NULL; |
| session->state |= LIBSSH2_STATE_AUTHENTICATED; |
| session->userauth_list_state = libssh2_NB_state_idle; |
| return NULL; |
| } |
| |
| methods_len = _libssh2_ntohu32(session->userauth_list_data + 1); |
| |
| /* Do note that the memory areas overlap! */ |
| memmove(session->userauth_list_data, session->userauth_list_data + 5, |
| methods_len); |
| session->userauth_list_data[methods_len] = '\0'; |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, "Permitted auth methods: %s", |
| session->userauth_list_data); |
| } |
| |
| session->userauth_list_state = libssh2_NB_state_idle; |
| return (char *) session->userauth_list_data; |
| } |
| |
| /* libssh2_userauth_list |
| * |
| * List authentication methods |
| * Will yield successful login if "none" happens to be allowable for this user |
| * Not a common configuration for any SSH server though |
| * username should be NULL, or a null terminated string |
| */ |
| LIBSSH2_API char * |
| libssh2_userauth_list(LIBSSH2_SESSION * session, const char *user, |
| unsigned int user_len) |
| { |
| char *ptr; |
| BLOCK_ADJUST_ERRNO(ptr, session, |
| userauth_list(session, user, user_len)); |
| return ptr; |
| } |
| |
| /* |
| * libssh2_userauth_authenticated |
| * |
| * Returns: 0 if not yet authenticated |
| * non-zero is already authenticated |
| */ |
| LIBSSH2_API int |
| libssh2_userauth_authenticated(LIBSSH2_SESSION * session) |
| { |
| return session->state & LIBSSH2_STATE_AUTHENTICATED; |
| } |
| |
| |
| |
| /* userauth_password |
| * Plain ol' login |
| */ |
| static int |
| userauth_password(LIBSSH2_SESSION *session, const char *username, |
| unsigned int username_len, const char *password, |
| unsigned int password_len, |
| LIBSSH2_PASSWD_CHANGEREQ_FUNC((*passwd_change_cb))) |
| { |
| unsigned char *s; |
| static const unsigned char reply_codes[4] = |
| { SSH_MSG_USERAUTH_SUCCESS, SSH_MSG_USERAUTH_FAILURE, |
| SSH_MSG_USERAUTH_PASSWD_CHANGEREQ, 0 |
| }; |
| int rc; |
| |
| if (session->userauth_pswd_state == libssh2_NB_state_idle) { |
| /* Zero the whole thing out */ |
| memset(&session->userauth_pswd_packet_requirev_state, 0, |
| sizeof(session->userauth_pswd_packet_requirev_state)); |
| |
| /* |
| * 40 = acket_type(1) + username_len(4) + service_len(4) + |
| * service(14)"ssh-connection" + method_len(4) + method(8)"password" + |
| * chgpwdbool(1) + password_len(4) */ |
| session->userauth_pswd_data_len = username_len + password_len + 40; |
| |
| session->userauth_pswd_data0 = ~SSH_MSG_USERAUTH_PASSWD_CHANGEREQ; |
| |
| s = session->userauth_pswd_data = |
| LIBSSH2_ALLOC(session, session->userauth_pswd_data_len); |
| if (!session->userauth_pswd_data) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for userauth-password" |
| " request", 0); |
| return -1; |
| } |
| |
| *(s++) = SSH_MSG_USERAUTH_REQUEST; |
| _libssh2_htonu32(s, username_len); |
| s += 4; |
| memcpy(s, username, username_len); |
| s += username_len; |
| |
| _libssh2_htonu32(s, sizeof("ssh-connection") - 1); |
| s += 4; |
| memcpy(s, "ssh-connection", sizeof("ssh-connection") - 1); |
| s += sizeof("ssh-connection") - 1; |
| |
| _libssh2_htonu32(s, sizeof("password") - 1); |
| s += 4; |
| memcpy(s, "password", sizeof("password") - 1); |
| s += sizeof("password") - 1; |
| |
| *s = '\0'; |
| s++; |
| |
| _libssh2_htonu32(s, password_len); |
| s += 4; |
| memcpy(s, password, password_len); |
| s += password_len; |
| |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Attempting to login using password authentication"); |
| |
| session->userauth_pswd_state = libssh2_NB_state_created; |
| } |
| |
| if (session->userauth_pswd_state == libssh2_NB_state_created) { |
| rc = _libssh2_transport_write(session, session->userauth_pswd_data, |
| session->userauth_pswd_data_len); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_SOCKET_SEND, |
| "Unable to send userauth-password request", 0); |
| LIBSSH2_FREE(session, session->userauth_pswd_data); |
| session->userauth_pswd_data = NULL; |
| session->userauth_pswd_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| LIBSSH2_FREE(session, session->userauth_pswd_data); |
| session->userauth_pswd_data = NULL; |
| |
| session->userauth_pswd_state = libssh2_NB_state_sent; |
| } |
| |
| password_response: |
| |
| if ((session->userauth_pswd_state == libssh2_NB_state_sent) |
| || (session->userauth_pswd_state == libssh2_NB_state_sent1) |
| || (session->userauth_pswd_state == libssh2_NB_state_sent2)) { |
| if (session->userauth_pswd_state == libssh2_NB_state_sent) { |
| rc = _libssh2_packet_requirev(session, reply_codes, |
| &session->userauth_pswd_data, |
| &session->userauth_pswd_data_len, |
| 0, NULL, 0, |
| &session-> |
| userauth_pswd_packet_requirev_state); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| session->userauth_pswd_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| if (session->userauth_pswd_data[0] == SSH_MSG_USERAUTH_SUCCESS) { |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Password authentication successful"); |
| LIBSSH2_FREE(session, session->userauth_pswd_data); |
| session->userauth_pswd_data = NULL; |
| session->state |= LIBSSH2_STATE_AUTHENTICATED; |
| session->userauth_pswd_state = libssh2_NB_state_idle; |
| return 0; |
| } |
| |
| session->userauth_pswd_newpw = NULL; |
| session->userauth_pswd_newpw_len = 0; |
| |
| session->userauth_pswd_state = libssh2_NB_state_sent1; |
| } |
| |
| if ((session->userauth_pswd_data[0] == |
| SSH_MSG_USERAUTH_PASSWD_CHANGEREQ) |
| || (session->userauth_pswd_data0 == |
| SSH_MSG_USERAUTH_PASSWD_CHANGEREQ)) { |
| session->userauth_pswd_data0 = SSH_MSG_USERAUTH_PASSWD_CHANGEREQ; |
| |
| if ((session->userauth_pswd_state == libssh2_NB_state_sent1) || |
| (session->userauth_pswd_state == libssh2_NB_state_sent2)) { |
| if (session->userauth_pswd_state == libssh2_NB_state_sent1) { |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Password change required"); |
| LIBSSH2_FREE(session, session->userauth_pswd_data); |
| session->userauth_pswd_data = NULL; |
| } |
| if (passwd_change_cb) { |
| if (session->userauth_pswd_state == libssh2_NB_state_sent1) { |
| passwd_change_cb(session, |
| &session->userauth_pswd_newpw, |
| &session->userauth_pswd_newpw_len, |
| &session->abstract); |
| if (!session->userauth_pswd_newpw) { |
| libssh2_error(session, |
| LIBSSH2_ERROR_PASSWORD_EXPIRED, |
| "Password expired, and callback failed", |
| 0); |
| return -1; |
| } |
| |
| /* basic data_len + newpw_len(4) */ |
| session->userauth_pswd_data_len = |
| username_len + password_len + 44 + |
| session->userauth_pswd_newpw_len; |
| |
| s = session->userauth_pswd_data = |
| LIBSSH2_ALLOC(session, |
| session->userauth_pswd_data_len); |
| if (!session->userauth_pswd_data) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for userauth-password-change request", |
| 0); |
| LIBSSH2_FREE(session, |
| session->userauth_pswd_newpw); |
| session->userauth_pswd_newpw = NULL; |
| return -1; |
| } |
| |
| *(s++) = SSH_MSG_USERAUTH_REQUEST; |
| _libssh2_htonu32(s, username_len); |
| s += 4; |
| memcpy(s, username, username_len); |
| s += username_len; |
| |
| _libssh2_htonu32(s, sizeof("ssh-connection") - 1); |
| s += 4; |
| memcpy(s, "ssh-connection", |
| sizeof("ssh-connection") - 1); |
| s += sizeof("ssh-connection") - 1; |
| |
| _libssh2_htonu32(s, sizeof("password") - 1); |
| s += 4; |
| memcpy(s, "password", sizeof("password") - 1); |
| s += sizeof("password") - 1; |
| |
| *s = 0x01; |
| s++; |
| |
| _libssh2_htonu32(s, password_len); |
| s += 4; |
| memcpy(s, password, password_len); |
| s += password_len; |
| |
| _libssh2_htonu32(s, session->userauth_pswd_newpw_len); |
| s += 4; |
| memcpy(s, session->userauth_pswd_newpw, |
| session->userauth_pswd_newpw_len); |
| s += session->userauth_pswd_newpw_len; |
| |
| session->userauth_pswd_state = libssh2_NB_state_sent2; |
| } |
| |
| if (session->userauth_pswd_state == libssh2_NB_state_sent2) { |
| rc = _libssh2_transport_write(session, |
| session->userauth_pswd_data, |
| session-> |
| userauth_pswd_data_len); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_SOCKET_SEND, |
| "Unable to send userauth-password-change request", |
| 0); |
| LIBSSH2_FREE(session, session->userauth_pswd_data); |
| session->userauth_pswd_data = NULL; |
| LIBSSH2_FREE(session, |
| session->userauth_pswd_newpw); |
| session->userauth_pswd_newpw = NULL; |
| return -1; |
| } |
| LIBSSH2_FREE(session, session->userauth_pswd_data); |
| session->userauth_pswd_data = NULL; |
| LIBSSH2_FREE(session, session->userauth_pswd_newpw); |
| session->userauth_pswd_newpw = NULL; |
| |
| /* |
| * Ugliest use of goto ever. Blame it on the |
| * askN => requirev migration. |
| */ |
| session->userauth_pswd_state = libssh2_NB_state_sent; |
| goto password_response; |
| } |
| } |
| } else { |
| libssh2_error(session, LIBSSH2_ERROR_PASSWORD_EXPIRED, |
| "Password Expired, and no callback specified", |
| 0); |
| session->userauth_pswd_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| } |
| } |
| |
| /* FAILURE */ |
| LIBSSH2_FREE(session, session->userauth_pswd_data); |
| session->userauth_pswd_data = NULL; |
| session->userauth_pswd_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| /* |
| * libssh2_userauth_password_ex |
| * |
| * Plain ol' login |
| */ |
| |
| LIBSSH2_API int |
| libssh2_userauth_password_ex(LIBSSH2_SESSION *session, const char *username, |
| unsigned int username_len, const char *password, |
| unsigned int password_len, |
| LIBSSH2_PASSWD_CHANGEREQ_FUNC((*passwd_change_cb))) |
| { |
| int rc; |
| BLOCK_ADJUST(rc, session, |
| userauth_password(session, username, username_len, |
| password, password_len, |
| passwd_change_cb)); |
| return rc; |
| } |
| |
| /* |
| * file_read_publickey |
| * |
| * Read a public key from an id_???.pub style file |
| * |
| * Returns an allocated string in *pubkeydata on success. |
| */ |
| static int |
| file_read_publickey(LIBSSH2_SESSION * session, unsigned char **method, |
| unsigned long *method_len, |
| unsigned char **pubkeydata, |
| unsigned long *pubkeydata_len, |
| const char *pubkeyfile) |
| { |
| FILE *fd; |
| char c; |
| unsigned char *pubkey = NULL, *sp1, *sp2, *tmp; |
| size_t pubkey_len = 0; |
| unsigned int tmp_len; |
| |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, "Loading public key file: %s", |
| pubkeyfile); |
| /* Read Public Key */ |
| fd = fopen(pubkeyfile, "r"); |
| if (!fd) { |
| libssh2_error(session, LIBSSH2_ERROR_FILE, |
| "Unable to open public key file", 0); |
| return -1; |
| } |
| while (!feof(fd) && (c = fgetc(fd)) != '\r' && c != '\n') |
| pubkey_len++; |
| if (feof(fd)) { |
| /* the last character was EOF */ |
| pubkey_len--; |
| } |
| rewind(fd); |
| |
| if (pubkey_len <= 1) { |
| libssh2_error(session, LIBSSH2_ERROR_FILE, |
| "Invalid data in public key file", 0); |
| fclose(fd); |
| return -1; |
| } |
| |
| pubkey = LIBSSH2_ALLOC(session, pubkey_len); |
| if (!pubkey) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for public key data", 0); |
| fclose(fd); |
| return -1; |
| } |
| if (fread(pubkey, 1, pubkey_len, fd) != pubkey_len) { |
| libssh2_error(session, LIBSSH2_ERROR_FILE, |
| "Unable to read public key from file", 0); |
| LIBSSH2_FREE(session, pubkey); |
| fclose(fd); |
| return -1; |
| } |
| fclose(fd); |
| /* |
| * Remove trailing whitespace |
| */ |
| while (pubkey_len && isspace(pubkey[pubkey_len - 1])) |
| pubkey_len--; |
| |
| if (!pubkey_len) { |
| libssh2_error(session, LIBSSH2_ERROR_FILE, "Missing public key data", |
| 0); |
| LIBSSH2_FREE(session, pubkey); |
| return -1; |
| } |
| |
| if ((sp1 = memchr(pubkey, ' ', pubkey_len)) == NULL) { |
| libssh2_error(session, LIBSSH2_ERROR_FILE, "Invalid public key data", |
| 0); |
| LIBSSH2_FREE(session, pubkey); |
| return -1; |
| } |
| /* Wasting some bytes here (okay, more than some), |
| * but since it's likely to be freed soon anyway, |
| * we'll just avoid the extra free/alloc and call it a wash */ |
| *method = pubkey; |
| *method_len = sp1 - pubkey; |
| |
| sp1++; |
| |
| if ((sp2 = memchr(sp1, ' ', pubkey_len - *method_len)) == NULL) { |
| /* Assume that the id string is missing, but that it's okay */ |
| sp2 = pubkey + pubkey_len; |
| } |
| |
| if (libssh2_base64_decode(session, (char **) &tmp, &tmp_len, |
| (char *) sp1, sp2 - sp1)) { |
| libssh2_error(session, LIBSSH2_ERROR_FILE, |
| "Invalid key data, not base64 encoded", 0); |
| LIBSSH2_FREE(session, pubkey); |
| return -1; |
| } |
| *pubkeydata = tmp; |
| *pubkeydata_len = tmp_len; |
| |
| return 0; |
| } |
| |
| |
| |
| /* libssh2_file_read_privatekey |
| * Read a PEM encoded private key from an id_??? style file |
| */ |
| static int |
| file_read_privatekey(LIBSSH2_SESSION * session, |
| const LIBSSH2_HOSTKEY_METHOD ** hostkey_method, |
| void **hostkey_abstract, |
| const unsigned char *method, int method_len, |
| const char *privkeyfile, const char *passphrase) |
| { |
| const LIBSSH2_HOSTKEY_METHOD **hostkey_methods_avail = |
| libssh2_hostkey_methods(); |
| |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, "Loading private key file: %s", |
| privkeyfile); |
| *hostkey_method = NULL; |
| *hostkey_abstract = NULL; |
| while (*hostkey_methods_avail && (*hostkey_methods_avail)->name) { |
| if ((*hostkey_methods_avail)->initPEM |
| && strncmp((*hostkey_methods_avail)->name, (const char *) method, |
| method_len) == 0) { |
| *hostkey_method = *hostkey_methods_avail; |
| break; |
| } |
| hostkey_methods_avail++; |
| } |
| if (!*hostkey_method) { |
| libssh2_error(session, LIBSSH2_ERROR_METHOD_NONE, |
| "No handler for specified private key", 0); |
| return -1; |
| } |
| |
| if ((*hostkey_method)-> |
| initPEM(session, privkeyfile, (unsigned char *) passphrase, |
| hostkey_abstract)) { |
| libssh2_error(session, LIBSSH2_ERROR_FILE, |
| "Unable to initialize private key from file", 0); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| |
| |
| /* userauth_hostbased_fromfile |
| * Authenticate using a keypair found in the named files |
| */ |
| static int |
| userauth_hostbased_fromfile(LIBSSH2_SESSION *session, |
| const char *username, unsigned int username_len, |
| const char *publickey, const char *privatekey, |
| const char *passphrase, const char *hostname, |
| unsigned int hostname_len, |
| const char *local_username, |
| unsigned int local_username_len) |
| { |
| static const unsigned char reply_codes[3] = |
| { SSH_MSG_USERAUTH_SUCCESS, SSH_MSG_USERAUTH_FAILURE, 0 }; |
| int rc; |
| |
| if (session->userauth_host_state == libssh2_NB_state_idle) { |
| const LIBSSH2_HOSTKEY_METHOD *privkeyobj; |
| unsigned char *pubkeydata, *sig; |
| unsigned long pubkeydata_len; |
| unsigned long sig_len; |
| void *abstract; |
| unsigned char buf[5]; |
| struct iovec datavec[4]; |
| |
| /* Zero the whole thing out */ |
| memset(&session->userauth_host_packet_requirev_state, 0, |
| sizeof(session->userauth_host_packet_requirev_state)); |
| |
| if (file_read_publickey(session, &session->userauth_host_method, |
| &session->userauth_host_method_len, |
| &pubkeydata, &pubkeydata_len, |
| publickey)) { |
| return -1; |
| } |
| |
| /* |
| * 48 = packet_type(1) + username_len(4) + servicename_len(4) + |
| * service_name(14)"ssh-connection" + authmethod_len(4) + |
| * authmethod(9)"hostbased" + method_len(4) + pubkeydata_len(4) + |
| * local_username_len(4) |
| */ |
| session->userauth_host_packet_len = |
| username_len + session->userauth_host_method_len + hostname_len + |
| local_username_len + pubkeydata_len + 48; |
| |
| /* |
| * Preallocate space for an overall length, method name again, |
| * and the signature, which won't be any larger than the size of |
| * the publickeydata itself |
| */ |
| session->userauth_host_s = session->userauth_host_packet = |
| LIBSSH2_ALLOC(session, |
| session->userauth_host_packet_len + 4 + |
| (4 + session->userauth_host_method_len) + |
| (4 + pubkeydata_len)); |
| if (!session->userauth_host_packet) { |
| LIBSSH2_FREE(session, session->userauth_host_method); |
| session->userauth_host_method = NULL; |
| LIBSSH2_FREE(session, pubkeydata); |
| return -1; |
| } |
| |
| *(session->userauth_host_s++) = SSH_MSG_USERAUTH_REQUEST; |
| _libssh2_htonu32(session->userauth_host_s, username_len); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, username, username_len); |
| session->userauth_host_s += username_len; |
| |
| /* TODO: change the hideous '14' to a nice defined */ |
| _libssh2_htonu32(session->userauth_host_s, 14); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, "ssh-connection", 14); |
| session->userauth_host_s += 14; |
| |
| /* TODO: change the hideous '9' to a nice defined */ |
| _libssh2_htonu32(session->userauth_host_s, 9); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, "hostbased", 9); |
| session->userauth_host_s += 9; |
| |
| _libssh2_htonu32(session->userauth_host_s, |
| session->userauth_host_method_len); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, session->userauth_host_method, |
| session->userauth_host_method_len); |
| session->userauth_host_s += session->userauth_host_method_len; |
| |
| _libssh2_htonu32(session->userauth_host_s, pubkeydata_len); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, pubkeydata, pubkeydata_len); |
| session->userauth_host_s += pubkeydata_len; |
| LIBSSH2_FREE(session, pubkeydata); |
| |
| _libssh2_htonu32(session->userauth_host_s, hostname_len); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, hostname, hostname_len); |
| session->userauth_host_s += hostname_len; |
| |
| _libssh2_htonu32(session->userauth_host_s, local_username_len); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, local_username, local_username_len); |
| session->userauth_host_s += local_username_len; |
| |
| if (file_read_privatekey(session, &privkeyobj, &abstract, |
| session->userauth_host_method, |
| session->userauth_host_method_len, |
| privatekey, passphrase)) { |
| LIBSSH2_FREE(session, session->userauth_host_method); |
| session->userauth_host_method = NULL; |
| LIBSSH2_FREE(session, session->userauth_host_packet); |
| session->userauth_host_packet = NULL; |
| return -1; |
| } |
| |
| _libssh2_htonu32(buf, session->session_id_len); |
| datavec[0].iov_base = buf; |
| datavec[0].iov_len = 4; |
| datavec[1].iov_base = session->session_id; |
| datavec[1].iov_len = session->session_id_len; |
| datavec[2].iov_base = session->userauth_host_packet; |
| datavec[2].iov_len = session->userauth_host_packet_len; |
| |
| if (privkeyobj->signv(session, &sig, &sig_len, 3, datavec, &abstract)) { |
| LIBSSH2_FREE(session, session->userauth_host_method); |
| session->userauth_host_method = NULL; |
| LIBSSH2_FREE(session, session->userauth_host_packet); |
| session->userauth_host_packet = NULL; |
| if (privkeyobj->dtor) { |
| privkeyobj->dtor(session, &abstract); |
| } |
| return -1; |
| } |
| |
| if (privkeyobj->dtor) { |
| privkeyobj->dtor(session, &abstract); |
| } |
| |
| if (sig_len > pubkeydata_len) { |
| unsigned char *newpacket; |
| /* Should *NEVER* happen, but...well.. better safe than sorry */ |
| newpacket = LIBSSH2_REALLOC(session, session->userauth_host_packet, |
| session->userauth_host_packet_len + 4 + |
| (4 + session->userauth_host_method_len) |
| + (4 + sig_len)); /* PK sigblob */ |
| if (!newpacket) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Failed allocating additional space for " |
| "userauth-hostbased packet", |
| 0); |
| LIBSSH2_FREE(session, sig); |
| LIBSSH2_FREE(session, session->userauth_host_packet); |
| session->userauth_host_packet = NULL; |
| LIBSSH2_FREE(session, session->userauth_host_method); |
| session->userauth_host_method = NULL; |
| return -1; |
| } |
| session->userauth_host_packet = newpacket; |
| } |
| |
| session->userauth_host_s = |
| session->userauth_host_packet + session->userauth_host_packet_len; |
| |
| _libssh2_htonu32(session->userauth_host_s, |
| 4 + session->userauth_host_method_len + 4 + sig_len); |
| session->userauth_host_s += 4; |
| |
| _libssh2_htonu32(session->userauth_host_s, |
| session->userauth_host_method_len); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, session->userauth_host_method, |
| session->userauth_host_method_len); |
| session->userauth_host_s += session->userauth_host_method_len; |
| LIBSSH2_FREE(session, session->userauth_host_method); |
| session->userauth_host_method = NULL; |
| |
| _libssh2_htonu32(session->userauth_host_s, sig_len); |
| session->userauth_host_s += 4; |
| memcpy(session->userauth_host_s, sig, sig_len); |
| session->userauth_host_s += sig_len; |
| LIBSSH2_FREE(session, sig); |
| |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Attempting hostbased authentication"); |
| |
| session->userauth_host_state = libssh2_NB_state_created; |
| } |
| |
| if (session->userauth_host_state == libssh2_NB_state_created) { |
| rc = _libssh2_transport_write(session, session->userauth_host_packet, |
| session->userauth_host_s - |
| session->userauth_host_packet); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_SOCKET_SEND, |
| "Unable to send userauth-hostbased request", 0); |
| LIBSSH2_FREE(session, session->userauth_host_packet); |
| session->userauth_host_packet = NULL; |
| session->userauth_host_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| LIBSSH2_FREE(session, session->userauth_host_packet); |
| session->userauth_host_packet = NULL; |
| |
| session->userauth_host_state = libssh2_NB_state_sent; |
| } |
| |
| if (session->userauth_host_state == libssh2_NB_state_sent) { |
| unsigned long data_len; |
| rc = _libssh2_packet_requirev(session, reply_codes, |
| &session->userauth_host_data, |
| &data_len, 0, NULL, 0, |
| &session-> |
| userauth_host_packet_requirev_state); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } |
| |
| session->userauth_host_state = libssh2_NB_state_idle; |
| if (rc) |
| return -1; |
| |
| if (session->userauth_host_data[0] == SSH_MSG_USERAUTH_SUCCESS) { |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Hostbased authentication successful"); |
| /* We are us and we've proved it. */ |
| LIBSSH2_FREE(session, session->userauth_host_data); |
| session->userauth_host_data = NULL; |
| session->state |= LIBSSH2_STATE_AUTHENTICATED; |
| return 0; |
| } |
| } |
| |
| /* This public key is not allowed for this user on this server */ |
| LIBSSH2_FREE(session, session->userauth_host_data); |
| session->userauth_host_data = NULL; |
| libssh2_error(session, LIBSSH2_ERROR_PUBLICKEY_UNVERIFIED, |
| "Invalid signature for supplied public key, or bad " |
| "username/public key combination", |
| 0); |
| return -1; |
| } |
| |
| /* libssh2_userauth_hostbased_fromfile_ex |
| * Authenticate using a keypair found in the named files |
| */ |
| LIBSSH2_API int |
| libssh2_userauth_hostbased_fromfile_ex(LIBSSH2_SESSION *session, |
| const char *user, |
| unsigned int user_len, |
| const char *publickey, |
| const char *privatekey, |
| const char *passphrase, |
| const char *host, |
| unsigned int host_len, |
| const char *localuser, |
| unsigned int localuser_len) |
| { |
| int rc; |
| BLOCK_ADJUST(rc, session, |
| userauth_hostbased_fromfile(session, user, user_len, |
| publickey, privatekey, |
| passphrase, host, host_len, |
| localuser, localuser_len)); |
| return rc; |
| } |
| |
| |
| |
| /* |
| * userauth_publickey_fromfile |
| * Authenticate using a keypair found in the named files |
| */ |
| static int |
| userauth_publickey_fromfile(LIBSSH2_SESSION *session, |
| const char *username, |
| unsigned int username_len, |
| const char *publickey, |
| const char *privatekey, |
| const char *passphrase) |
| { |
| unsigned long pubkeydata_len = 0; |
| unsigned char reply_codes[4] = |
| { SSH_MSG_USERAUTH_SUCCESS, SSH_MSG_USERAUTH_FAILURE, |
| SSH_MSG_USERAUTH_PK_OK, 0 |
| }; |
| int rc; |
| |
| if (session->userauth_pblc_state == libssh2_NB_state_idle) { |
| unsigned char *pubkeydata; |
| |
| /* Zero the whole thing out */ |
| memset(&session->userauth_pblc_packet_requirev_state, 0, |
| sizeof(session->userauth_pblc_packet_requirev_state)); |
| |
| if (file_read_publickey(session, &session->userauth_pblc_method, |
| &session->userauth_pblc_method_len, |
| &pubkeydata, &pubkeydata_len,publickey)) { |
| return -1; |
| } |
| |
| /* |
| * 45 = packet_type(1) + username_len(4) + servicename_len(4) + |
| * service_name(14)"ssh-connection" + authmethod_len(4) + |
| * authmethod(9)"publickey" + sig_included(1)'\0' + algmethod_len(4) + |
| * publickey_len(4) |
| */ |
| session->userauth_pblc_packet_len = |
| username_len + session->userauth_pblc_method_len + pubkeydata_len + |
| 45; |
| |
| /* |
| * Preallocate space for an overall length, method name again, and |
| * the signature, which won't be any larger than the size of the |
| * publickeydata itself |
| */ |
| session->userauth_pblc_s = session->userauth_pblc_packet = |
| LIBSSH2_ALLOC(session, |
| session->userauth_pblc_packet_len + 4 + |
| (4 + session->userauth_pblc_method_len) |
| + (4 + pubkeydata_len)); |
| if (!session->userauth_pblc_packet) { |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| LIBSSH2_FREE(session, pubkeydata); |
| return -1; |
| } |
| |
| *(session->userauth_pblc_s++) = SSH_MSG_USERAUTH_REQUEST; |
| _libssh2_htonu32(session->userauth_pblc_s, username_len); |
| session->userauth_pblc_s += 4; |
| memcpy(session->userauth_pblc_s, username, username_len); |
| session->userauth_pblc_s += username_len; |
| |
| _libssh2_htonu32(session->userauth_pblc_s, 14); |
| session->userauth_pblc_s += 4; |
| memcpy(session->userauth_pblc_s, "ssh-connection", 14); |
| session->userauth_pblc_s += 14; |
| |
| _libssh2_htonu32(session->userauth_pblc_s, 9); |
| session->userauth_pblc_s += 4; |
| memcpy(session->userauth_pblc_s, "publickey", 9); |
| session->userauth_pblc_s += 9; |
| |
| session->userauth_pblc_b = session->userauth_pblc_s; |
| /* Not sending signature with *this* packet */ |
| *(session->userauth_pblc_s++) = 0; |
| |
| _libssh2_htonu32(session->userauth_pblc_s, |
| session->userauth_pblc_method_len); |
| session->userauth_pblc_s += 4; |
| memcpy(session->userauth_pblc_s, session->userauth_pblc_method, |
| session->userauth_pblc_method_len); |
| session->userauth_pblc_s += session->userauth_pblc_method_len; |
| |
| _libssh2_htonu32(session->userauth_pblc_s, pubkeydata_len); |
| session->userauth_pblc_s += 4; |
| memcpy(session->userauth_pblc_s, pubkeydata, pubkeydata_len); |
| session->userauth_pblc_s += pubkeydata_len; |
| LIBSSH2_FREE(session, pubkeydata); |
| |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Attempting publickey authentication"); |
| |
| session->userauth_pblc_state = libssh2_NB_state_created; |
| } |
| |
| if (session->userauth_pblc_state == libssh2_NB_state_created) { |
| rc = _libssh2_transport_write(session, session->userauth_pblc_packet, |
| session->userauth_pblc_packet_len); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_SOCKET_SEND, |
| "Unable to send userauth-publickey request", 0); |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| session->userauth_pblc_state = libssh2_NB_state_sent; |
| } |
| |
| if (session->userauth_pblc_state == libssh2_NB_state_sent) { |
| const LIBSSH2_HOSTKEY_METHOD *privkeyobj; |
| void *abstract; |
| unsigned char buf[5]; |
| struct iovec datavec[4]; |
| unsigned char *sig; |
| unsigned long sig_len; |
| |
| rc = _libssh2_packet_requirev(session, reply_codes, |
| &session->userauth_pblc_data, |
| &session->userauth_pblc_data_len, 0, |
| NULL, 0, |
| &session-> |
| userauth_pblc_packet_requirev_state); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| if (session->userauth_pblc_data[0] == SSH_MSG_USERAUTH_SUCCESS) { |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Pubkey authentication prematurely successful"); |
| /* |
| * God help any SSH server that allows an UNVERIFIED |
| * public key to validate the user |
| */ |
| LIBSSH2_FREE(session, session->userauth_pblc_data); |
| session->userauth_pblc_data = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| session->state |= LIBSSH2_STATE_AUTHENTICATED; |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return 0; |
| } |
| |
| if (session->userauth_pblc_data[0] == SSH_MSG_USERAUTH_FAILURE) { |
| /* This public key is not allowed for this user on this server */ |
| LIBSSH2_FREE(session, session->userauth_pblc_data); |
| session->userauth_pblc_data = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| libssh2_error(session, LIBSSH2_ERROR_PUBLICKEY_UNRECOGNIZED, |
| "Username/PublicKey combination invalid", 0); |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| /* Semi-Success! */ |
| LIBSSH2_FREE(session, session->userauth_pblc_data); |
| session->userauth_pblc_data = NULL; |
| |
| if (file_read_privatekey(session, &privkeyobj, &abstract, |
| session->userauth_pblc_method, |
| session->userauth_pblc_method_len, |
| privatekey, passphrase)) { |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| *session->userauth_pblc_b = 0x01; |
| |
| _libssh2_htonu32(buf, session->session_id_len); |
| datavec[0].iov_base = buf; |
| datavec[0].iov_len = 4; |
| datavec[1].iov_base = session->session_id; |
| datavec[1].iov_len = session->session_id_len; |
| datavec[2].iov_base = session->userauth_pblc_packet; |
| datavec[2].iov_len = session->userauth_pblc_packet_len; |
| |
| if (privkeyobj->signv(session, &sig, &sig_len, 3, datavec, &abstract)) { |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| if (privkeyobj->dtor) { |
| privkeyobj->dtor(session, &abstract); |
| } |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| if (privkeyobj->dtor) { |
| privkeyobj->dtor(session, &abstract); |
| } |
| |
| /* |
| * If this function was restarted, pubkeydata_len might still be 0 |
| * which will cause an unnecessary but harmless realloc here. |
| */ |
| if (sig_len > pubkeydata_len) { |
| unsigned char *newpacket; |
| /* Should *NEVER* happen, but...well.. better safe than sorry */ |
| newpacket = LIBSSH2_REALLOC(session, |
| session->userauth_pblc_packet, |
| session->userauth_pblc_packet_len + 4 + |
| (4 + session->userauth_pblc_method_len) |
| + (4 + sig_len)); /* PK sigblob */ |
| if (!newpacket) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Failed allocating additional space for " |
| "userauth-publickey packet", |
| 0); |
| LIBSSH2_FREE(session, sig); |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| session->userauth_pblc_packet = newpacket; |
| } |
| |
| session->userauth_pblc_s = |
| session->userauth_pblc_packet + session->userauth_pblc_packet_len; |
| session->userauth_pblc_b = NULL; |
| |
| _libssh2_htonu32(session->userauth_pblc_s, |
| 4 + session->userauth_pblc_method_len + 4 + sig_len); |
| session->userauth_pblc_s += 4; |
| |
| _libssh2_htonu32(session->userauth_pblc_s, |
| session->userauth_pblc_method_len); |
| session->userauth_pblc_s += 4; |
| memcpy(session->userauth_pblc_s, session->userauth_pblc_method, |
| session->userauth_pblc_method_len); |
| session->userauth_pblc_s += session->userauth_pblc_method_len; |
| LIBSSH2_FREE(session, session->userauth_pblc_method); |
| session->userauth_pblc_method = NULL; |
| |
| _libssh2_htonu32(session->userauth_pblc_s, sig_len); |
| session->userauth_pblc_s += 4; |
| memcpy(session->userauth_pblc_s, sig, sig_len); |
| session->userauth_pblc_s += sig_len; |
| LIBSSH2_FREE(session, sig); |
| |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Attempting publickey authentication -- phase 2"); |
| |
| session->userauth_pblc_state = libssh2_NB_state_sent1; |
| } |
| |
| if (session->userauth_pblc_state == libssh2_NB_state_sent1) { |
| rc = _libssh2_transport_write(session, session->userauth_pblc_packet, |
| session->userauth_pblc_s - |
| session->userauth_pblc_packet); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_SOCKET_SEND, |
| "Unable to send userauth-publickey request", 0); |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| LIBSSH2_FREE(session, session->userauth_pblc_packet); |
| session->userauth_pblc_packet = NULL; |
| |
| session->userauth_pblc_state = libssh2_NB_state_sent2; |
| } |
| |
| /* PK_OK is no longer valid */ |
| reply_codes[2] = 0; |
| |
| rc = _libssh2_packet_requirev(session, reply_codes, |
| &session->userauth_pblc_data, |
| &session->userauth_pblc_data_len, 0, NULL, 0, |
| &session->userauth_pblc_packet_requirev_state); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| if (session->userauth_pblc_data[0] == SSH_MSG_USERAUTH_SUCCESS) { |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Publickey authentication successful"); |
| /* We are us and we've proved it. */ |
| LIBSSH2_FREE(session, session->userauth_pblc_data); |
| session->userauth_pblc_data = NULL; |
| session->state |= LIBSSH2_STATE_AUTHENTICATED; |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return 0; |
| } |
| |
| /* This public key is not allowed for this user on this server */ |
| LIBSSH2_FREE(session, session->userauth_pblc_data); |
| session->userauth_pblc_data = NULL; |
| libssh2_error(session, LIBSSH2_ERROR_PUBLICKEY_UNVERIFIED, |
| "Invalid signature for supplied public key, or bad " |
| "username/public key combination", |
| 0); |
| session->userauth_pblc_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| /* libssh2_userauth_publickey_fromfile_ex |
| * Authenticate using a keypair found in the named files |
| */ |
| LIBSSH2_API int |
| libssh2_userauth_publickey_fromfile_ex(LIBSSH2_SESSION *session, |
| const char *user, |
| unsigned int user_len, |
| const char *publickey, |
| const char *privatekey, |
| const char *passphrase) |
| { |
| int rc; |
| BLOCK_ADJUST(rc, session, |
| userauth_publickey_fromfile(session, user, user_len, |
| publickey, privatekey, |
| passphrase)); |
| return rc; |
| } |
| |
| |
| |
| /* |
| * userauth_keyboard_interactive |
| * |
| * Authenticate using a challenge-response authentication |
| */ |
| static int |
| userauth_keyboard_interactive(LIBSSH2_SESSION * session, |
| const char *username, |
| unsigned int username_len, |
| LIBSSH2_USERAUTH_KBDINT_RESPONSE_FUNC((*response_callback))) |
| { |
| unsigned char *s; |
| int rc; |
| |
| static const unsigned char reply_codes[4] = { SSH_MSG_USERAUTH_SUCCESS, |
| SSH_MSG_USERAUTH_FAILURE, SSH_MSG_USERAUTH_INFO_REQUEST, 0 |
| }; |
| unsigned int language_tag_len; |
| unsigned int i; |
| |
| if (session->userauth_kybd_state == libssh2_NB_state_idle) { |
| session->userauth_kybd_auth_name = NULL; |
| session->userauth_kybd_auth_instruction = NULL; |
| session->userauth_kybd_num_prompts = 0; |
| session->userauth_kybd_auth_failure = 1; |
| session->userauth_kybd_prompts = NULL; |
| session->userauth_kybd_responses = NULL; |
| |
| /* Zero the whole thing out */ |
| memset(&session->userauth_kybd_packet_requirev_state, 0, |
| sizeof(session->userauth_kybd_packet_requirev_state)); |
| |
| session->userauth_kybd_packet_len = |
| 1 /* byte SSH_MSG_USERAUTH_REQUEST */ |
| + 4 + username_len /* string user name (ISO-10646 UTF-8, as |
| defined in [RFC-3629]) */ |
| + 4 + 14 /* string service name (US-ASCII) */ |
| + 4 + 20 /* string "keyboard-interactive" (US-ASCII) */ |
| + 4 + 0 /* string language tag (as defined in |
| [RFC-3066]) */ |
| + 4 + 0 /* string submethods (ISO-10646 UTF-8) */ |
| ; |
| |
| session->userauth_kybd_data = s = |
| LIBSSH2_ALLOC(session, session->userauth_kybd_packet_len); |
| if (!s) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for " |
| "keyboard-interactive authentication", |
| 0); |
| return -1; |
| } |
| |
| *s++ = SSH_MSG_USERAUTH_REQUEST; |
| |
| /* user name */ |
| _libssh2_htonu32(s, username_len); |
| s += 4; |
| memcpy(s, username, username_len); |
| s += username_len; |
| |
| /* service name */ |
| _libssh2_htonu32(s, sizeof("ssh-connection") - 1); |
| s += 4; |
| memcpy(s, "ssh-connection", sizeof("ssh-connection") - 1); |
| s += sizeof("ssh-connection") - 1; |
| |
| /* "keyboard-interactive" */ |
| _libssh2_htonu32(s, sizeof("keyboard-interactive") - 1); |
| s += 4; |
| memcpy(s, "keyboard-interactive", sizeof("keyboard-interactive") - 1); |
| s += sizeof("keyboard-interactive") - 1; |
| |
| /* language tag */ |
| _libssh2_htonu32(s, 0); |
| s += 4; |
| |
| /* submethods */ |
| _libssh2_htonu32(s, 0); |
| s += 4; |
| |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Attempting keyboard-interactive authentication"); |
| |
| session->userauth_kybd_state = libssh2_NB_state_created; |
| } |
| |
| if (session->userauth_kybd_state == libssh2_NB_state_created) { |
| rc = _libssh2_transport_write(session, session->userauth_kybd_data, |
| session->userauth_kybd_packet_len); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_SOCKET_SEND, |
| "Unable to send keyboard-interactive request", 0); |
| LIBSSH2_FREE(session, session->userauth_kybd_data); |
| session->userauth_kybd_data = NULL; |
| session->userauth_kybd_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| LIBSSH2_FREE(session, session->userauth_kybd_data); |
| session->userauth_kybd_data = NULL; |
| |
| session->userauth_kybd_state = libssh2_NB_state_sent; |
| } |
| |
| for(;;) { |
| if (session->userauth_kybd_state == libssh2_NB_state_sent) { |
| rc = _libssh2_packet_requirev(session, reply_codes, |
| &session->userauth_kybd_data, |
| &session->userauth_kybd_data_len, |
| 0, NULL, 0, |
| &session-> |
| userauth_kybd_packet_requirev_state); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } else if (rc) { |
| session->userauth_kybd_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| if (session->userauth_kybd_data[0] == SSH_MSG_USERAUTH_SUCCESS) { |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Keyboard-interactive authentication successful"); |
| LIBSSH2_FREE(session, session->userauth_kybd_data); |
| session->userauth_kybd_data = NULL; |
| session->state |= LIBSSH2_STATE_AUTHENTICATED; |
| session->userauth_kybd_state = libssh2_NB_state_idle; |
| return 0; |
| } |
| |
| if (session->userauth_kybd_data[0] == SSH_MSG_USERAUTH_FAILURE) { |
| LIBSSH2_FREE(session, session->userauth_kybd_data); |
| session->userauth_kybd_data = NULL; |
| session->userauth_kybd_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| /* server requested PAM-like conversation */ |
| |
| s = session->userauth_kybd_data + 1; |
| |
| /* string name (ISO-10646 UTF-8) */ |
| session->userauth_kybd_auth_name_len = _libssh2_ntohu32(s); |
| s += 4; |
| session->userauth_kybd_auth_name = |
| LIBSSH2_ALLOC(session, session->userauth_kybd_auth_name_len); |
| if (!session->userauth_kybd_auth_name) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for " |
| "keyboard-interactive 'name' request field", |
| 0); |
| goto cleanup; |
| } |
| memcpy(session->userauth_kybd_auth_name, s, |
| session->userauth_kybd_auth_name_len); |
| s += session->userauth_kybd_auth_name_len; |
| |
| /* string instruction (ISO-10646 UTF-8) */ |
| session->userauth_kybd_auth_instruction_len = _libssh2_ntohu32(s); |
| s += 4; |
| session->userauth_kybd_auth_instruction = |
| LIBSSH2_ALLOC(session, |
| session->userauth_kybd_auth_instruction_len); |
| if (!session->userauth_kybd_auth_instruction) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for " |
| "keyboard-interactive 'instruction' " |
| "request field", |
| 0); |
| goto cleanup; |
| } |
| memcpy(session->userauth_kybd_auth_instruction, s, |
| session->userauth_kybd_auth_instruction_len); |
| s += session->userauth_kybd_auth_instruction_len; |
| |
| /* string language tag (as defined in [RFC-3066]) */ |
| language_tag_len = _libssh2_ntohu32(s); |
| s += 4; |
| /* ignoring this field as deprecated */ |
| s += language_tag_len; |
| |
| /* int num-prompts */ |
| session->userauth_kybd_num_prompts = _libssh2_ntohu32(s); |
| s += 4; |
| |
| session->userauth_kybd_prompts = |
| LIBSSH2_ALLOC(session, |
| sizeof(LIBSSH2_USERAUTH_KBDINT_PROMPT) * |
| session->userauth_kybd_num_prompts); |
| if (!session->userauth_kybd_prompts) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for " |
| "keyboard-interactive prompts array", |
| 0); |
| goto cleanup; |
| } |
| memset(session->userauth_kybd_prompts, 0, |
| sizeof(LIBSSH2_USERAUTH_KBDINT_PROMPT) * |
| session->userauth_kybd_num_prompts); |
| |
| session->userauth_kybd_responses = |
| LIBSSH2_ALLOC(session, |
| sizeof(LIBSSH2_USERAUTH_KBDINT_RESPONSE) * |
| session->userauth_kybd_num_prompts); |
| if (!session->userauth_kybd_responses) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for " |
| "keyboard-interactive responses array", |
| 0); |
| goto cleanup; |
| } |
| memset(session->userauth_kybd_responses, 0, |
| sizeof(LIBSSH2_USERAUTH_KBDINT_RESPONSE) * |
| session->userauth_kybd_num_prompts); |
| |
| for(i = 0; i != session->userauth_kybd_num_prompts; ++i) { |
| /* string prompt[1] (ISO-10646 UTF-8) */ |
| session->userauth_kybd_prompts[i].length = _libssh2_ntohu32(s); |
| s += 4; |
| session->userauth_kybd_prompts[i].text = |
| LIBSSH2_ALLOC(session, |
| session->userauth_kybd_prompts[i].length); |
| if (!session->userauth_kybd_prompts[i].text) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for " |
| "keyboard-interactive prompt message", |
| 0); |
| goto cleanup; |
| } |
| memcpy(session->userauth_kybd_prompts[i].text, s, |
| session->userauth_kybd_prompts[i].length); |
| s += session->userauth_kybd_prompts[i].length; |
| |
| /* boolean echo[1] */ |
| session->userauth_kybd_prompts[i].echo = *s++; |
| } |
| |
| response_callback(session->userauth_kybd_auth_name, |
| session->userauth_kybd_auth_name_len, |
| session->userauth_kybd_auth_instruction, |
| session->userauth_kybd_auth_instruction_len, |
| session->userauth_kybd_num_prompts, |
| session->userauth_kybd_prompts, |
| session->userauth_kybd_responses, |
| &session->abstract); |
| |
| _libssh2_debug(session, LIBSSH2_DBG_AUTH, |
| "Keyboard-interactive response callback function" |
| " invoked"); |
| |
| session->userauth_kybd_packet_len = |
| 1 /* byte SSH_MSG_USERAUTH_INFO_RESPONSE */ |
| + 4 /* int num-responses */ |
| ; |
| |
| for(i = 0; i != session->userauth_kybd_num_prompts; ++i) { |
| /* string response[1] (ISO-10646 UTF-8) */ |
| session->userauth_kybd_packet_len += |
| 4 + session->userauth_kybd_responses[i].length; |
| } |
| |
| session->userauth_kybd_data = s = |
| LIBSSH2_ALLOC(session, session->userauth_kybd_packet_len); |
| if (!s) { |
| libssh2_error(session, LIBSSH2_ERROR_ALLOC, |
| "Unable to allocate memory for keyboard-" |
| "interactive response packet", |
| 0); |
| goto cleanup; |
| } |
| |
| *s = SSH_MSG_USERAUTH_INFO_RESPONSE; |
| s++; |
| _libssh2_htonu32(s, session->userauth_kybd_num_prompts); |
| s += 4; |
| |
| for(i = 0; i != session->userauth_kybd_num_prompts; ++i) { |
| _libssh2_htonu32(s, session->userauth_kybd_responses[i].length); |
| s += 4; |
| memcpy(s, session->userauth_kybd_responses[i].text, |
| session->userauth_kybd_responses[i].length); |
| s += session->userauth_kybd_responses[i].length; |
| } |
| |
| session->userauth_kybd_state = libssh2_NB_state_sent1; |
| } |
| |
| if (session->userauth_kybd_state == libssh2_NB_state_sent1) { |
| rc = _libssh2_transport_write(session, session->userauth_kybd_data, |
| session->userauth_kybd_packet_len); |
| if (rc == PACKET_EAGAIN) { |
| return rc; |
| } |
| if (rc) { |
| libssh2_error(session, LIBSSH2_ERROR_SOCKET_SEND, |
| "Unable to send userauth-keyboard-interactive" |
| " request", |
| 0); |
| goto cleanup; |
| } |
| |
| session->userauth_kybd_auth_failure = 0; |
| } |
| |
| cleanup: |
| /* |
| * It's safe to clean all the data here, because unallocated pointers |
| * are filled by zeroes |
| */ |
| |
| LIBSSH2_FREE(session, session->userauth_kybd_data); |
| session->userauth_kybd_data = NULL; |
| |
| if (session->userauth_kybd_prompts) { |
| for(i = 0; i != session->userauth_kybd_num_prompts; ++i) { |
| LIBSSH2_FREE(session, session->userauth_kybd_prompts[i].text); |
| session->userauth_kybd_prompts[i].text = NULL; |
| } |
| } |
| |
| if (session->userauth_kybd_responses) { |
| for(i = 0; i != session->userauth_kybd_num_prompts; ++i) { |
| LIBSSH2_FREE(session, |
| session->userauth_kybd_responses[i].text); |
| session->userauth_kybd_responses[i].text = NULL; |
| } |
| } |
| |
| LIBSSH2_FREE(session, session->userauth_kybd_prompts); |
| session->userauth_kybd_prompts = NULL; |
| LIBSSH2_FREE(session, session->userauth_kybd_responses); |
| session->userauth_kybd_responses = NULL; |
| |
| if (session->userauth_kybd_auth_failure) { |
| session->userauth_kybd_state = libssh2_NB_state_idle; |
| return -1; |
| } |
| |
| session->userauth_kybd_state = libssh2_NB_state_sent; |
| } |
| } |
| |
| /* |
| * libssh2_userauth_keyboard_interactive_ex |
| * |
| * Authenticate using a challenge-response authentication |
| */ |
| LIBSSH2_API int |
| libssh2_userauth_keyboard_interactive_ex(LIBSSH2_SESSION *session, |
| const char *user, |
| unsigned int user_len, |
| LIBSSH2_USERAUTH_KBDINT_RESPONSE_FUNC((*response_callback))) |
| { |
| int rc; |
| BLOCK_ADJUST(rc, session, |
| userauth_keyboard_interactive(session, user, user_len, |
| response_callback)); |
| return rc; |
| } |
| |