[master] Imported from libpng-1.6.35.tar
diff --git a/ANNOUNCE b/ANNOUNCE
index 0f66c0d..9fc9021 100644
--- a/ANNOUNCE
+++ b/ANNOUNCE
@@ -1,35 +1,48 @@
-Libpng 1.6.34 - September 29, 2017
+Libpng 1.6.35 - July 15, 2018
-This is a public release of libpng, intended for use in production codes.
+This is a public release of libpng, intended for use in production code.
Files available for download:
-Source files with LF line endings (for Unix/Linux) and with a
-"configure" script
+Source files with LF line endings (for Unix/Linux):
- libpng-1.6.34.tar.xz (LZMA-compressed, recommended)
- libpng-1.6.34.tar.gz
+ libpng-1.6.35.tar.xz (LZMA-compressed, recommended)
+ libpng-1.6.35.tar.gz
-Source files with CRLF line endings (for Windows), without the
-"configure" script
+Source files with CRLF line endings (for Windows):
- lpng1634.7z (LZMA-compressed, recommended)
- lpng1634.zip
+ lp1635.7z (LZMA-compressed, recommended)
+ lp1635.zip
Other information:
- libpng-1.6.34-README.txt
- libpng-1.6.34-LICENSE.txt
- libpng-1.6.34-*.asc (armored detached GPG signatures)
+ libpng-1.6.35-README.txt
+ libpng-1.6.35-LICENSE.txt
-Changes since the last public release (1.6.33):
- Removed contrib/pngsuite/i*.png; some of these were incorrect and caused
- test failures.
+Changes since the last public release (1.6.34):
+
+ Restored 21 of the contrib/pngsuite/i*.png, which do not cause test
+ failures. Placed the remainder in contrib/pngsuite/interlaced/i*.png.
+ Added calls to png_set_*() transforms commonly used by browsers to
+ the fuzzer.
+ Removed some unnecessary brackets in pngrtran.c
+ Fixed miscellaneous typos (Patch by github user "luzpaz").
+ Change "ASM C" to "C ASM" in CMakeLists.txt
+ Fixed incorrect handling of bKGD chunk in sub-8-bit files (Cosmin)
+ Added hardware optimization directories to zip and 7z distributions.
+ Fixed incorrect bitmask for options.
+ Fixed many spelling typos.
+ Make png_get_iCCP consistent with man page (allow compression-type argument
+ to be NULL, bug report by Lenard Szolnoki).
+ Replaced the remaining uses of png_size_t with size_t (Cosmin)
+ Fixed the calculation of row_factor in png_check_chunk_length
+ (reported by Thuan Pham in SourceForge issue #278)
+ Added missing parentheses to a macro definition
+ (suggested by "irwir" in GitHub issue #216)
Send comments/corrections/commendations to png-mng-implement at lists.sf.net
(subscription required; visit
https://lists.sourceforge.net/lists/listinfo/png-mng-implement
-to subscribe)
-or to glennrp at users.sourceforge.net
+to subscribe).
Glenn R-P
diff --git a/CHANGES b/CHANGES
index 4b82118..0ed6a11 100644
--- a/CHANGES
+++ b/CHANGES
@@ -1,4 +1,3 @@
-#if 0
CHANGES - changes for libpng
version 0.1 [March 29, 1995]
@@ -1454,7 +1453,7 @@
sequential read support.
Added some "#if PNG_WRITE_SUPPORTED" blocks.
Added #ifdef to remove some redundancy in png_malloc_default().
- Use png_malloc instead of png_zalloc to allocate the pallete.
+ Use png_malloc instead of png_zalloc to allocate the palette.
Version 1.0.16rc1 and 1.2.6rc1 [August 4, 2004]
Fixed buffer overflow vulnerability (CVE-2004-0597) in png_handle_tRNS().
@@ -3259,7 +3258,7 @@
Revised PNG_EXPORTA macro to not use an empty parameter, to accommodate the
old VisualC++ preprocessor.
Turned on interlace handling in png_read_png().
- Fixed gcc pendantic warnings.
+ Fixed gcc pedantic warnings.
Handle longjmp in Cygwin.
Fixed png_get_current_row_number() in the interlaced case.
Cleaned up ALPHA flags and transformations.
@@ -3359,7 +3358,7 @@
Pass "" instead of '\0' to png_default_error() in png_err(). This mistake
was introduced in libpng-1.2.20beta01. This fixes CVE-2011-2691.
Added PNG_WRITE_OPTIMIZE_CMF_SUPPORTED macro to make the zlib "CMF" byte
- optimization configureable.
+ optimization configurable.
IDAT compression failed if preceded by a compressed text chunk (bug
introduced in libpng-1.5.3beta01-02). This was because the attempt to
reset the zlib stream in png_write_IDAT happened after the first IDAT
@@ -3643,7 +3642,7 @@
Fixed bug in png_write_chunk_header() debug print, introduced in 1.5.6beta01.
Version 1.5.6beta06 [October 17, 2011]
- Removed two redundant tests for unitialized row.
+ Removed two redundant tests for uninitialized row.
Fixed a relatively harmless memory overwrite in compressed text writing
with a 1 byte zlib buffer.
Add ability to call png_read_update_info multiple times to pngvalid.c.
@@ -3689,7 +3688,7 @@
crash. The pngmem.c implementation of png_malloc() included a cast
to png_size_t which would fail on large allocations on 16-bit systems.
Fix for the preprocessor of the Intel C compiler. The preprocessor
- splits adjacent @ signs with a space; this changes the concatentation
+ splits adjacent @ signs with a space; this changes the concatenation
token from @-@-@ to PNG_JOIN; that should work with all compiler
preprocessors.
Paeth filter speed improvements from work by Siarhei Siamashka. This
@@ -3735,7 +3734,7 @@
gray (on palette) itself.
Fixes for C++ compilation using g++ When libpng source is compiled
using g++. The compiler imposes C++ rules on the C source; thus it
- is desireable to make the source work with either C or C++ rules
+ is desirable to make the source work with either C or C++ rules
without throwing away useful error information. This change adds
png_voidcast to allow C semantic (void*) cases or the corresponding
C++ static_cast operation, as appropriate.
@@ -4061,7 +4060,7 @@
possible to call png_inflate() incrementally. A warning is no longer
issued if the language tag or translated keyword in the iTXt chunk
has zero length.
- If benign errors are disabled use maximum window on ancilliary inflate.
+ If benign errors are disabled use maximum window on ancillary inflate.
This works round a bug introduced in 1.5.4 where compressed ancillary
chunks could end up with a too-small windowBits value in the deflate
header.
@@ -4176,7 +4175,7 @@
declared even though the functions are never actually defined. This
change provides a dummy definition so that the declarations work, yet any
implementation will fail to compile because of an incomplete type.
- Re-eliminated the use of strcpy() in pngtest.c. An unncessary use of
+ Re-eliminated the use of strcpy() in pngtest.c. An unnecessary use of
strcpy() was accidentally re-introduced in libpng16; this change replaces
it with strncpy().
Eliminated use of png_sizeof(); use sizeof() instead.
@@ -4309,7 +4308,7 @@
resulting in VS2010 having to update the files.
Removed non-working ICC profile support code that was mostly added to
libpng-1.6.0beta29 and beta30. There was too much code for too little
- gain; implementing full ICC color correction may be desireable but is left
+ gain; implementing full ICC color correction may be desirable but is left
up to applications.
Version 1.6.0beta32 [November 25, 2012]
@@ -4592,7 +4591,7 @@
the optimizations ('check' vs 'api') are exposed in the public header files
except that the new setting PNG_ARM_NEON_OPT documents how libpng makes the
decision about whether or not to use the optimizations.
- Protect symbol prefixing against CC/CPPFLAGS/CFLAGS useage.
+ Protect symbol prefixing against CC/CPPFLAGS/CFLAGS usage.
Previous iOS/Xcode fixes for the ARM NEON optimizations moved the test
on __ARM_NEON__ from configure time to compile time. This breaks symbol
prefixing because the definition of the special png_init_filter_functions
@@ -5635,7 +5634,7 @@
to All and adds a list of the warnings that need to be turned off. This is
semi-documentary; the intent is to tell libpng users which warnings have
been examined and judged non-fixable at present. The warning about
- structure padding is fixable, but it would be a signficant change (moving
+ structure padding is fixable, but it would be a significant change (moving
structure members around).
Version 1.6.24beta03 [July 4, 2016]
@@ -5781,7 +5780,7 @@
Added option to Cmake build allowing a custom location of zlib to be
specified in a scenario where libpng is being built as a subproject
alongside zlib by another project (Sam Serrels).
- Changed png_ptr->options from a png_byte to png_uint_32, to accomodate
+ Changed png_ptr->options from a png_byte to png_uint_32, to accommodate
up to 16 options.
Version 1.6.28rc02 [January 4, 2017]
@@ -5932,7 +5931,7 @@
Update libpng.3 and libpng-manual.txt about eXIf functions.
Version 1.6.32beta05 [August 2, 2017]
- Restored png_get_eXIf() and png_set_eXIf() to maintain API compatability.
+ Restored png_get_eXIf() and png_set_eXIf() to maintain API compatibility.
Version 1.6.32beta06 [August 2, 2017]
Removed png_get_eXIf_1() and png_set_eXIf_1().
@@ -6038,14 +6037,35 @@
Add end_info structure and png_read_end() to the libpng fuzzer.
Version 1.6.34 [September 29, 2017]
- Removed contrib/pngsuite/i*.png; some of these were incorrect and caused
- test failures.
+ Removed contrib/pngsuite/i*.png; some of them caused test failures.
+
+Version 1.6.35beta01 [March 6, 2018]
+ Restored 21 of the contrib/pngsuite/i*.png, which do not cause test
+ failures. Placed the remainder in contrib/pngsuite/interlaced/i*.png.
+ Added calls to png_set_*() transforms commonly used by browsers to
+ the fuzzer.
+ Removed some unnecessary brackets in pngrtran.c
+ Fixed miscellaneous typos (Patch by github user "luzpaz").
+ Change "ASM C" to "C ASM" in CMakeLists.txt
+ Fixed incorrect handling of bKGD chunk in sub-8-bit files (Cosmin)
+ Added hardware optimization directories to zip and 7z distributions.
+ Fixed incorrect bitmask for options.
+ Fixed many spelling typos.
+
+Version 1.6.35beta02 [March 28, 2018]
+ Make png_get_iCCP consistent with man page (allow compression-type argument
+ to be NULL, bug report by Lenard Szolnoki).
+
+Version 1.6.35 [July 15, 2018]
+ Replaced the remaining uses of png_size_t with size_t (Cosmin)
+ Fixed the calculation of row_factor in png_check_chunk_length
+ (reported by Thuan Pham in SourceForge issue #278)
+ Added missing parentheses to a macro definition
+ (suggested by "irwir" in GitHub issue #216)
Send comments/corrections/commendations to png-mng-implement at lists.sf.net
(subscription required; visit
https://lists.sourceforge.net/lists/listinfo/png-mng-implement
-to subscribe)
-or to glennrp at users.sourceforge.net
+to subscribe).
Glenn R-P
-#endif
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 48c6fa2..4db9bb8 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -1,6 +1,6 @@
# CMakeLists.txt
-# Copyright (C) 2007,2009-2017 Glenn Randers-Pehrson
+# Copyright (C) 2007,2009-2018 Glenn Randers-Pehrson
# Written by Christian Ehrlicher, 2007
# Revised by Roger Lowman, 2009-2010
# Revised by Clifford Yapp, 2011-2012
@@ -31,12 +31,12 @@
set(CMAKE_CONFIGURATION_TYPES "Release;Debug;MinSizeRel;RelWithDebInfo")
-project(libpng ASM C)
+project(libpng C ASM)
enable_testing()
set(PNGLIB_MAJOR 1)
set(PNGLIB_MINOR 6)
-set(PNGLIB_RELEASE 34)
+set(PNGLIB_RELEASE 35)
set(PNGLIB_NAME libpng${PNGLIB_MAJOR}${PNGLIB_MINOR})
set(PNGLIB_VERSION ${PNGLIB_MAJOR}.${PNGLIB_MINOR}.${PNGLIB_RELEASE})
@@ -424,7 +424,7 @@
WORKING_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}")
# A single target handles generation of all generated files. If
- # they are dependend upon separately by multiple targets, this
+ # they are depended upon separately by multiple targets, this
# confuses parallel make (it would require a separate top-level
# target for each file to track the dependencies properly).
add_custom_target(genfiles DEPENDS
@@ -844,7 +844,7 @@
# SET UP LINKS
if(PNG_SHARED)
set_target_properties(png PROPERTIES
-# VERSION 16.${PNGLIB_RELEASE}.1.6.34
+# VERSION 16.${PNGLIB_RELEASE}.1.6.35
VERSION 16.${PNGLIB_RELEASE}.0
SOVERSION 16
CLEAN_DIRECT_OUTPUT 1)
diff --git a/INSTALL b/INSTALL
index e8edb72..4c17022 100644
--- a/INSTALL
+++ b/INSTALL
@@ -284,7 +284,7 @@
XIV. Enabling or disabling hardware optimizations
-Certain hardware capabilites, such as the Intel SSE instructions,
+Certain hardware capabilities, such as the Intel SSE instructions,
are normally detected at run time. Enable them with configure options
such as one of
diff --git a/LICENSE b/LICENSE
index 4cda4fa..6ee9c8f 100644
--- a/LICENSE
+++ b/LICENSE
@@ -10,8 +10,8 @@
This code is released under the libpng license.
-libpng versions 1.0.7, July 1, 2000 through 1.6.34, September 29, 2017 are
-Copyright (c) 2000-2002, 2004, 2006-2017 Glenn Randers-Pehrson, are
+libpng versions 1.0.7, July 1, 2000 through 1.6.35, July 15, 2018 are
+Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson, are
derived from libpng-1.0.6, and are distributed according to the same
disclaimer and license as libpng-1.0.6 with the following individuals
added to the list of Contributing Authors:
@@ -130,4 +130,4 @@
Glenn Randers-Pehrson
glennrp at users.sourceforge.net
-September 29, 2017
+July 15, 2018
diff --git a/Makefile.in b/Makefile.in
new file mode 100644
index 0000000..79d2b88
--- /dev/null
+++ b/Makefile.in
@@ -0,0 +1,2419 @@
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am, the source file for Makefile.in (and hence Makefile), is
+#
+# Copyright (c) 2004-2016 Glenn Randers-Pehrson
+# Last changed in libpng 1.6.25 [September 1, 2016]
+#
+# This code is released under the libpng license.
+# For conditions of distribution and use, see the disclaimer
+# and license in png.h
+
+
+
+
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
+am__make_running_with_option = \
+ case $${target_option-} in \
+ ?) ;; \
+ *) echo "am__make_running_with_option: internal error: invalid" \
+ "target option '$${target_option-}' specified" >&2; \
+ exit 1;; \
+ esac; \
+ has_opt=no; \
+ sane_makeflags=$$MAKEFLAGS; \
+ if $(am__is_gnu_make); then \
+ sane_makeflags=$$MFLAGS; \
+ else \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ bs=\\; \
+ sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+ | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
+ esac; \
+ fi; \
+ skip_next=no; \
+ strip_trailopt () \
+ { \
+ flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+ }; \
+ for flg in $$sane_makeflags; do \
+ test $$skip_next = yes && { skip_next=no; continue; }; \
+ case $$flg in \
+ *=*|--*) continue;; \
+ -*I) strip_trailopt 'I'; skip_next=yes;; \
+ -*I?*) strip_trailopt 'I';; \
+ -*O) strip_trailopt 'O'; skip_next=yes;; \
+ -*O?*) strip_trailopt 'O';; \
+ -*l) strip_trailopt 'l'; skip_next=yes;; \
+ -*l?*) strip_trailopt 'l';; \
+ -[dEDm]) skip_next=yes;; \
+ -[JT]) skip_next=yes;; \
+ esac; \
+ case $$flg in \
+ *$$target_option*) has_opt=yes; break;; \
+ esac; \
+ done; \
+ test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+check_PROGRAMS = pngtest$(EXEEXT) pngunknown$(EXEEXT) \
+ pngstest$(EXEEXT) pngvalid$(EXEEXT) pngimage$(EXEEXT) \
+ pngcp$(EXEEXT) $(am__EXEEXT_1)
+@HAVE_CLOCK_GETTIME_TRUE@am__append_1 = timepng
+bin_PROGRAMS = pngfix$(EXEEXT) png-fix-itxt$(EXEEXT)
+@PNG_ARM_NEON_TRUE@am__append_2 = arm/arm_init.c\
+@PNG_ARM_NEON_TRUE@ arm/filter_neon.S arm/filter_neon_intrinsics.c
+
+@PNG_MIPS_MSA_TRUE@am__append_3 = mips/mips_init.c\
+@PNG_MIPS_MSA_TRUE@ mips/filter_msa_intrinsics.c
+
+@PNG_INTEL_SSE_TRUE@am__append_4 = intel/intel_init.c\
+@PNG_INTEL_SSE_TRUE@ intel/filter_sse2_intrinsics.c
+
+@PNG_POWERPC_VSX_TRUE@am__append_5 = powerpc/powerpc_init.c\
+@PNG_POWERPC_VSX_TRUE@ powerpc/filter_vsx_intrinsics.c
+
+
+# Versioned symbols and restricted exports
+@HAVE_LD_VERSION_SCRIPT_TRUE@@HAVE_SOLARIS_LD_TRUE@am__append_6 = -Wl,-M -Wl,libpng.vers
+@HAVE_LD_VERSION_SCRIPT_TRUE@@HAVE_SOLARIS_LD_FALSE@am__append_7 = -Wl,--version-script=libpng.vers
+# Only restricted exports when possible
+@HAVE_LD_VERSION_SCRIPT_FALSE@am__append_8 = -export-symbols libpng.sym
+@DO_PNG_PREFIX_TRUE@am__append_9 = -DPNG_PREFIX='@PNG_PREFIX@'
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/scripts/libtool.m4 \
+ $(top_srcdir)/scripts/ltoptions.m4 \
+ $(top_srcdir)/scripts/ltsugar.m4 \
+ $(top_srcdir)/scripts/ltversion.m4 \
+ $(top_srcdir)/scripts/lt~obsolete.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(pkginclude_HEADERS) $(am__DIST_COMMON)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = libpng.pc libpng-config
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libdir)" \
+ "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man3dir)" \
+ "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(pkgconfigdir)" \
+ "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)"
+@HAVE_CLOCK_GETTIME_TRUE@am__EXEEXT_1 = timepng$(EXEEXT)
+PROGRAMS = $(bin_PROGRAMS)
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LIBADD =
+am__libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES_DIST = png.c \
+ pngerror.c pngget.c pngmem.c pngpread.c pngread.c pngrio.c \
+ pngrtran.c pngrutil.c pngset.c pngtrans.c pngwio.c pngwrite.c \
+ pngwtran.c pngwutil.c png.h pngconf.h pngdebug.h pnginfo.h \
+ pngpriv.h pngstruct.h pngusr.dfa arm/arm_init.c \
+ arm/filter_neon.S arm/filter_neon_intrinsics.c \
+ mips/mips_init.c mips/filter_msa_intrinsics.c \
+ intel/intel_init.c intel/filter_sse2_intrinsics.c \
+ powerpc/powerpc_init.c powerpc/filter_vsx_intrinsics.c
+am__dirstamp = $(am__leading_dot)dirstamp
+@PNG_ARM_NEON_TRUE@am__objects_1 = arm/arm_init.lo arm/filter_neon.lo \
+@PNG_ARM_NEON_TRUE@ arm/filter_neon_intrinsics.lo
+@PNG_MIPS_MSA_TRUE@am__objects_2 = mips/mips_init.lo \
+@PNG_MIPS_MSA_TRUE@ mips/filter_msa_intrinsics.lo
+@PNG_INTEL_SSE_TRUE@am__objects_3 = intel/intel_init.lo \
+@PNG_INTEL_SSE_TRUE@ intel/filter_sse2_intrinsics.lo
+@PNG_POWERPC_VSX_TRUE@am__objects_4 = powerpc/powerpc_init.lo \
+@PNG_POWERPC_VSX_TRUE@ powerpc/filter_vsx_intrinsics.lo
+am_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = png.lo pngerror.lo \
+ pngget.lo pngmem.lo pngpread.lo pngread.lo pngrio.lo \
+ pngrtran.lo pngrutil.lo pngset.lo pngtrans.lo pngwio.lo \
+ pngwrite.lo pngwtran.lo pngwutil.lo $(am__objects_1) \
+ $(am__objects_2) $(am__objects_3) $(am__objects_4)
+nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS =
+libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS = \
+ $(am_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) \
+ $(nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS)
+AM_V_lt = $(am__v_lt_@AM_V@)
+am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
+am__v_lt_0 = --silent
+am__v_lt_1 =
+libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LINK = $(LIBTOOL) $(AM_V_lt) \
+ --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \
+ $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS) $(LDFLAGS) -o \
+ $@
+am_png_fix_itxt_OBJECTS = contrib/tools/png-fix-itxt.$(OBJEXT)
+png_fix_itxt_OBJECTS = $(am_png_fix_itxt_OBJECTS)
+png_fix_itxt_LDADD = $(LDADD)
+am_pngcp_OBJECTS = contrib/tools/pngcp.$(OBJEXT)
+pngcp_OBJECTS = $(am_pngcp_OBJECTS)
+pngcp_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+am_pngfix_OBJECTS = contrib/tools/pngfix.$(OBJEXT)
+pngfix_OBJECTS = $(am_pngfix_OBJECTS)
+pngfix_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+am_pngimage_OBJECTS = contrib/libtests/pngimage.$(OBJEXT)
+pngimage_OBJECTS = $(am_pngimage_OBJECTS)
+pngimage_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+am_pngstest_OBJECTS = contrib/libtests/pngstest.$(OBJEXT)
+pngstest_OBJECTS = $(am_pngstest_OBJECTS)
+pngstest_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+am_pngtest_OBJECTS = pngtest.$(OBJEXT)
+pngtest_OBJECTS = $(am_pngtest_OBJECTS)
+pngtest_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+am_pngunknown_OBJECTS = contrib/libtests/pngunknown.$(OBJEXT)
+pngunknown_OBJECTS = $(am_pngunknown_OBJECTS)
+pngunknown_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+am_pngvalid_OBJECTS = contrib/libtests/pngvalid.$(OBJEXT)
+pngvalid_OBJECTS = $(am_pngvalid_OBJECTS)
+pngvalid_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+am_timepng_OBJECTS = contrib/libtests/timepng.$(OBJEXT)
+timepng_OBJECTS = $(am_timepng_OBJECTS)
+timepng_DEPENDENCIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+SCRIPTS = $(bin_SCRIPTS)
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo " GEN " $@;
+am__v_GEN_1 =
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 =
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/png.Plo ./$(DEPDIR)/pngerror.Plo \
+ ./$(DEPDIR)/pngget.Plo ./$(DEPDIR)/pngmem.Plo \
+ ./$(DEPDIR)/pngpread.Plo ./$(DEPDIR)/pngread.Plo \
+ ./$(DEPDIR)/pngrio.Plo ./$(DEPDIR)/pngrtran.Plo \
+ ./$(DEPDIR)/pngrutil.Plo ./$(DEPDIR)/pngset.Plo \
+ ./$(DEPDIR)/pngtest.Po ./$(DEPDIR)/pngtrans.Plo \
+ ./$(DEPDIR)/pngwio.Plo ./$(DEPDIR)/pngwrite.Plo \
+ ./$(DEPDIR)/pngwtran.Plo ./$(DEPDIR)/pngwutil.Plo \
+ arm/$(DEPDIR)/arm_init.Plo arm/$(DEPDIR)/filter_neon.Plo \
+ arm/$(DEPDIR)/filter_neon_intrinsics.Plo \
+ contrib/libtests/$(DEPDIR)/pngimage.Po \
+ contrib/libtests/$(DEPDIR)/pngstest.Po \
+ contrib/libtests/$(DEPDIR)/pngunknown.Po \
+ contrib/libtests/$(DEPDIR)/pngvalid.Po \
+ contrib/libtests/$(DEPDIR)/timepng.Po \
+ contrib/tools/$(DEPDIR)/png-fix-itxt.Po \
+ contrib/tools/$(DEPDIR)/pngcp.Po \
+ contrib/tools/$(DEPDIR)/pngfix.Po \
+ intel/$(DEPDIR)/filter_sse2_intrinsics.Plo \
+ intel/$(DEPDIR)/intel_init.Plo \
+ mips/$(DEPDIR)/filter_msa_intrinsics.Plo \
+ mips/$(DEPDIR)/mips_init.Plo \
+ powerpc/$(DEPDIR)/filter_vsx_intrinsics.Plo \
+ powerpc/$(DEPDIR)/powerpc_init.Plo
+am__mv = mv -f
+CPPASCOMPILE = $(CCAS) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CCASFLAGS) $(CCASFLAGS)
+LTCPPASCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CCAS) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CCASFLAGS) $(CCASFLAGS)
+AM_V_CPPAS = $(am__v_CPPAS_@AM_V@)
+am__v_CPPAS_ = $(am__v_CPPAS_@AM_DEFAULT_V@)
+am__v_CPPAS_0 = @echo " CPPAS " $@;
+am__v_CPPAS_1 =
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=compile $(CC) $(DEFS) \
+ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
+ $(AM_CFLAGS) $(CFLAGS)
+AM_V_CC = $(am__v_CC_@AM_V@)
+am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
+am__v_CC_0 = @echo " CC " $@;
+am__v_CC_1 =
+CCLD = $(CC)
+LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(AM_LDFLAGS) $(LDFLAGS) -o $@
+AM_V_CCLD = $(am__v_CCLD_@AM_V@)
+am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
+am__v_CCLD_0 = @echo " CCLD " $@;
+am__v_CCLD_1 =
+SOURCES = $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES) \
+ $(nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES) \
+ $(png_fix_itxt_SOURCES) $(pngcp_SOURCES) $(pngfix_SOURCES) \
+ $(pngimage_SOURCES) $(pngstest_SOURCES) $(pngtest_SOURCES) \
+ $(pngunknown_SOURCES) $(pngvalid_SOURCES) $(timepng_SOURCES)
+DIST_SOURCES = \
+ $(am__libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES_DIST) \
+ $(png_fix_itxt_SOURCES) $(pngcp_SOURCES) $(pngfix_SOURCES) \
+ $(pngimage_SOURCES) $(pngstest_SOURCES) $(pngtest_SOURCES) \
+ $(pngunknown_SOURCES) $(pngvalid_SOURCES) $(timepng_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+man3dir = $(mandir)/man3
+man5dir = $(mandir)/man5
+NROFF = nroff
+MANS = $(dist_man_MANS)
+DATA = $(pkgconfig_DATA)
+HEADERS = $(nodist_pkginclude_HEADERS) $(pkginclude_HEADERS)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
+ $(LISP)config.h.in
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates. Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+ BEGIN { nonempty = 0; } \
+ { items[$$0] = 1; nonempty = 1; } \
+ END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique. This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+ list='$(am__tagged_files)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | $(am__uniquify_input)`
+ETAGS = etags
+CTAGS = ctags
+CSCOPE = cscope
+AM_RECURSIVE_TARGETS = cscope check recheck
+am__tty_colors_dummy = \
+ mgn= red= grn= lgn= blu= brg= std=; \
+ am__color_tests=no
+am__tty_colors = { \
+ $(am__tty_colors_dummy); \
+ if test "X$(AM_COLOR_TESTS)" = Xno; then \
+ am__color_tests=no; \
+ elif test "X$(AM_COLOR_TESTS)" = Xalways; then \
+ am__color_tests=yes; \
+ elif test "X$$TERM" != Xdumb && { test -t 1; } 2>/dev/null; then \
+ am__color_tests=yes; \
+ fi; \
+ if test $$am__color_tests = yes; then \
+ red='[0;31m'; \
+ grn='[0;32m'; \
+ lgn='[1;32m'; \
+ blu='[1;34m'; \
+ mgn='[0;35m'; \
+ brg='[1m'; \
+ std='[m'; \
+ fi; \
+}
+am__recheck_rx = ^[ ]*:recheck:[ ]*
+am__global_test_result_rx = ^[ ]*:global-test-result:[ ]*
+am__copy_in_global_log_rx = ^[ ]*:copy-in-global-log:[ ]*
+# A command that, given a newline-separated list of test names on the
+# standard input, print the name of the tests that are to be re-run
+# upon "make recheck".
+am__list_recheck_tests = $(AWK) '{ \
+ recheck = 1; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ { \
+ if ((getline line2 < ($$0 ".log")) < 0) \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[nN][Oo]/) \
+ { \
+ recheck = 0; \
+ break; \
+ } \
+ else if (line ~ /$(am__recheck_rx)[yY][eE][sS]/) \
+ { \
+ break; \
+ } \
+ }; \
+ if (recheck) \
+ print $$0; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# A command that, given a newline-separated list of test names on the
+# standard input, create the global log from their .trs and .log files.
+am__create_global_log = $(AWK) ' \
+function fatal(msg) \
+{ \
+ print "fatal: making $@: " msg | "cat >&2"; \
+ exit 1; \
+} \
+function rst_section(header) \
+{ \
+ print header; \
+ len = length(header); \
+ for (i = 1; i <= len; i = i + 1) \
+ printf "="; \
+ printf "\n\n"; \
+} \
+{ \
+ copy_in_global_log = 1; \
+ global_test_result = "RUN"; \
+ while ((rc = (getline line < ($$0 ".trs"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".trs"); \
+ if (line ~ /$(am__global_test_result_rx)/) \
+ { \
+ sub("$(am__global_test_result_rx)", "", line); \
+ sub("[ ]*$$", "", line); \
+ global_test_result = line; \
+ } \
+ else if (line ~ /$(am__copy_in_global_log_rx)[nN][oO]/) \
+ copy_in_global_log = 0; \
+ }; \
+ if (copy_in_global_log) \
+ { \
+ rst_section(global_test_result ": " $$0); \
+ while ((rc = (getline line < ($$0 ".log"))) != 0) \
+ { \
+ if (rc < 0) \
+ fatal("failed to read from " $$0 ".log"); \
+ print line; \
+ }; \
+ printf "\n"; \
+ }; \
+ close ($$0 ".trs"); \
+ close ($$0 ".log"); \
+}'
+# Restructured Text title.
+am__rst_title = { sed 's/.*/ & /;h;s/./=/g;p;x;s/ *$$//;p;g' && echo; }
+# Solaris 10 'make', and several other traditional 'make' implementations,
+# pass "-e" to $(SHELL), and POSIX 2008 even requires this. Work around it
+# by disabling -e (using the XSI extension "set +e") if it's set.
+am__sh_e_setup = case $$- in *e*) set +e;; esac
+# Default flags passed to test drivers.
+am__common_driver_flags = \
+ --color-tests "$$am__color_tests" \
+ --enable-hard-errors "$$am__enable_hard_errors" \
+ --expect-failure "$$am__expect_failure"
+# To be inserted before the command running the test. Creates the
+# directory for the log if needed. Stores in $dir the directory
+# containing $f, in $tst the test, in $log the log. Executes the
+# developer- defined test setup AM_TESTS_ENVIRONMENT (if any), and
+# passes TESTS_ENVIRONMENT. Set up options for the wrapper that
+# will run the test scripts (or their associated LOG_COMPILER, if
+# thy have one).
+am__check_pre = \
+$(am__sh_e_setup); \
+$(am__vpath_adj_setup) $(am__vpath_adj) \
+$(am__tty_colors); \
+srcdir=$(srcdir); export srcdir; \
+case "$@" in \
+ */*) am__odir=`echo "./$@" | sed 's|/[^/]*$$||'`;; \
+ *) am__odir=.;; \
+esac; \
+test "x$$am__odir" = x"." || test -d "$$am__odir" \
+ || $(MKDIR_P) "$$am__odir" || exit $$?; \
+if test -f "./$$f"; then dir=./; \
+elif test -f "$$f"; then dir=; \
+else dir="$(srcdir)/"; fi; \
+tst=$$dir$$f; log='$@'; \
+if test -n '$(DISABLE_HARD_ERRORS)'; then \
+ am__enable_hard_errors=no; \
+else \
+ am__enable_hard_errors=yes; \
+fi; \
+case " $(XFAIL_TESTS) " in \
+ *[\ \ ]$$f[\ \ ]* | *[\ \ ]$$dir$$f[\ \ ]*) \
+ am__expect_failure=yes;; \
+ *) \
+ am__expect_failure=no;; \
+esac; \
+$(AM_TESTS_ENVIRONMENT) $(TESTS_ENVIRONMENT)
+# A shell command to get the names of the tests scripts with any registered
+# extension removed (i.e., equivalently, the names of the test logs, with
+# the '.log' extension removed). The result is saved in the shell variable
+# '$bases'. This honors runtime overriding of TESTS and TEST_LOGS. Sadly,
+# we cannot use something simpler, involving e.g., "$(TEST_LOGS:.log=)",
+# since that might cause problem with VPATH rewrites for suffix-less tests.
+# See also 'test-harness-vpath-rewrite.sh' and 'test-trs-basic.sh'.
+am__set_TESTS_bases = \
+ bases='$(TEST_LOGS)'; \
+ bases=`for i in $$bases; do echo $$i; done | sed 's/\.log$$//'`; \
+ bases=`echo $$bases`
+RECHECK_LOGS = $(TEST_LOGS)
+TEST_SUITE_LOG = test-suite.log
+TEST_EXTENSIONS = @EXEEXT@ .test
+LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+LOG_COMPILE = $(LOG_COMPILER) $(AM_LOG_FLAGS) $(LOG_FLAGS)
+am__set_b = \
+ case '$@' in \
+ */*) \
+ case '$*' in \
+ */*) b='$*';; \
+ *) b=`echo '$@' | sed 's/\.log$$//'`; \
+ esac;; \
+ *) \
+ b='$*';; \
+ esac
+am__test_logs1 = $(TESTS:=.log)
+am__test_logs2 = $(am__test_logs1:@EXEEXT@.log=.log)
+TEST_LOGS = $(am__test_logs2:.test.log=.log)
+TEST_LOG_DRIVER = $(SHELL) $(top_srcdir)/test-driver
+TEST_LOG_COMPILE = $(TEST_LOG_COMPILER) $(AM_TEST_LOG_FLAGS) \
+ $(TEST_LOG_FLAGS)
+am__DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.in \
+ $(srcdir)/config.h.in $(srcdir)/libpng-config.in \
+ $(srcdir)/libpng.pc.in INSTALL README TODO compile \
+ config.guess config.sub depcomp install-sh ltmain.sh missing \
+ test-driver
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+am__post_remove_distdir = $(am__remove_distdir)
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.xz
+GZIP_ENV = --best
+DIST_TARGETS = dist-xz dist-gzip
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+
+#distribute headers in /usr/include/libpng/*
+pkgincludedir = $(includedir)/$(PNGLIB_BASENAME)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AS = @AS@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCAS = @CCAS@
+CCASDEPMODE = @CCASDEPMODE@
+CCASFLAGS = @CCASFLAGS@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+
+# DFNCPP is normally just CPP - the C preprocessor - but on Solaris and maybe
+# other operating systems (NeXT?) the C preprocessor selected by configure
+# checks input tokens for validity - effectively it performs part of the ANSI-C
+# parsing - and therefore fails with the .df files. configure.ac has special
+# checks for this and sets DFNCPP appropriately.
+DFNCPP = @DFNCPP@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PNGLIB_MAJOR = @PNGLIB_MAJOR@
+PNGLIB_MINOR = @PNGLIB_MINOR@
+PNGLIB_RELEASE = @PNGLIB_RELEASE@
+PNGLIB_VERSION = @PNGLIB_VERSION@
+
+# PNG_COPTS give extra options for the C compiler to be used on all compilation
+# steps (unless targe_CFLAGS is specified; that will take precedence over
+# AM_CFLAGS)
+PNG_COPTS = @PNG_COPTS@
+PNG_PREFIX = @PNG_PREFIX@
+POW_LIB = @POW_LIB@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+SYMBOL_PREFIX = @SYMBOL_PREFIX@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+
+# generate the -config scripts if required
+binconfigs = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+
+# pkg-config stuff, note that libpng.pc is always required in order
+# to get the correct library
+pkgconfigdir = @pkgconfigdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+PNGLIB_BASENAME = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@
+ACLOCAL_AMFLAGS = -I scripts
+
+# This ensures that pnglibconf.h gets built at the start of 'make all' or
+# 'make check', but it does not add dependencies to the individual programs,
+# this is done below.
+#
+# IMPORTANT: always add the object modules of new programs to the list below
+# because otherwise the sequence 'configure; make new-program' will *sometimes*
+# result in the installed (system) pnglibconf.h being used and the result is
+# always wrong and always very confusing.
+BUILT_SOURCES = pnglibconf.h
+pngtest_SOURCES = pngtest.c
+pngtest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+pngvalid_SOURCES = contrib/libtests/pngvalid.c
+pngvalid_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+pngstest_SOURCES = contrib/libtests/pngstest.c
+pngstest_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+pngunknown_SOURCES = contrib/libtests/pngunknown.c
+pngunknown_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+pngimage_SOURCES = contrib/libtests/pngimage.c
+pngimage_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+timepng_SOURCES = contrib/libtests/timepng.c
+timepng_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+pngfix_SOURCES = contrib/tools/pngfix.c
+pngfix_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+png_fix_itxt_SOURCES = contrib/tools/png-fix-itxt.c
+pngcp_SOURCES = contrib/tools/pngcp.c
+pngcp_LDADD = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+
+# Generally these are single line shell scripts to run a test with a particular
+# set of parameters:
+TESTS = \
+ tests/pngtest\
+ tests/pngtest-badpngs\
+ tests/pngvalid-gamma-16-to-8 tests/pngvalid-gamma-alpha-mode\
+ tests/pngvalid-gamma-background tests/pngvalid-gamma-expand16-alpha-mode\
+ tests/pngvalid-gamma-expand16-background\
+ tests/pngvalid-gamma-expand16-transform tests/pngvalid-gamma-sbit\
+ tests/pngvalid-gamma-threshold tests/pngvalid-gamma-transform\
+ tests/pngvalid-progressive-size\
+ tests/pngvalid-progressive-interlace-standard\
+ tests/pngvalid-transform\
+ tests/pngvalid-progressive-standard tests/pngvalid-standard\
+ tests/pngstest-1.8 tests/pngstest-1.8-alpha tests/pngstest-linear\
+ tests/pngstest-linear-alpha tests/pngstest-none tests/pngstest-none-alpha\
+ tests/pngstest-sRGB tests/pngstest-sRGB-alpha tests/pngunknown-IDAT\
+ tests/pngunknown-discard tests/pngunknown-if-safe tests/pngunknown-sAPI\
+ tests/pngunknown-sTER tests/pngunknown-save tests/pngunknown-vpAg\
+ tests/pngimage-quick tests/pngimage-full
+
+
+# man pages
+dist_man_MANS = libpng.3 libpngpf.3 png.5
+EXTRA_SCRIPTS = libpng-config libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config
+bin_SCRIPTS = @binconfigs@
+
+# rules to build libpng, only build the old library on request
+lib_LTLIBRARIES = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la
+# EXTRA_LTLIBRARIES= libpng.la
+libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = png.c pngerror.c \
+ pngget.c pngmem.c pngpread.c pngread.c pngrio.c pngrtran.c \
+ pngrutil.c pngset.c pngtrans.c pngwio.c pngwrite.c pngwtran.c \
+ pngwutil.c png.h pngconf.h pngdebug.h pnginfo.h pngpriv.h \
+ pngstruct.h pngusr.dfa $(am__append_2) $(am__append_3) \
+ $(am__append_4) $(am__append_5)
+nodist_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_SOURCES = pnglibconf.h
+libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LDFLAGS = -no-undefined \
+ -export-dynamic -version-number \
+ @PNGLIB_MAJOR@@PNGLIB_MINOR@:@PNGLIB_RELEASE@:0 \
+ $(am__append_6) $(am__append_7) $(am__append_8)
+@HAVE_LD_VERSION_SCRIPT_FALSE@libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.sym
+@HAVE_LD_VERSION_SCRIPT_TRUE@libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES = libpng.vers
+pkginclude_HEADERS = png.h pngconf.h
+nodist_pkginclude_HEADERS = pnglibconf.h
+pkgconfig_DATA = libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc
+
+# Extra source distribution files, '${srcdir}' is used below to stop build files
+# from those directories being included. This only works if the configure is
+# not done in the source directory!
+EXTRA_DIST = \
+ ANNOUNCE CHANGES INSTALL LICENSE README TODO \
+ pngtest.png pngbar.png pngnow.png pngbar.jpg autogen.sh \
+ ${srcdir}/contrib ${srcdir}/projects ${srcdir}/scripts \
+ $(TESTS) $(XFAIL_TESTS) tests/pngstest \
+ CMakeLists.txt example.c libpng-manual.txt
+
+SCRIPT_CLEANFILES = scripts/*.out scripts/*.chk
+CLEANFILES = *.tf? pngout.png libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.pc \
+ libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@-config libpng.vers libpng.sym \
+ check.new pnglibconf.h pngprefix.h symbols.new pngtest-log.txt \
+ pnglibconf.out pnglibconf.c pnglibconf.pre pnglibconf.dfn \
+ $(SCRIPT_CLEANFILES)
+
+MAINTAINERCLEANFILES = Makefile.in aclocal.m4 config.guess config.h.in \
+config.sub configure depcomp install-sh ltmain.sh missing
+
+AM_CFLAGS = ${PNG_COPTS}
+SUFFIXES = .chk .out
+
+# We must use -DPNG_NO_USE_READ_MACROS here even when the library may actually
+# be built with PNG_USE_READ_MACROS; this prevents the read macros from
+# interfering with the symbol file format.
+SYMBOL_CFLAGS = -DPNGLIB_LIBNAME='PNG@PNGLIB_MAJOR@@PNGLIB_MINOR@_0' \
+ -DPNGLIB_VERSION='@PNGLIB_VERSION@' \
+ -DSYMBOL_PREFIX='$(SYMBOL_PREFIX)' -DPNG_NO_USE_READ_MACROS \
+ -DPNG_BUILDING_SYMBOL_TABLE $(am__append_9)
+
+# EXT_LIST is a list of the possibly library directory extensions, this exists
+# because we can't find a good way of discovering the file extensions that are
+# actually installed on a given system, so instead we check for every extension
+# we have seen.
+EXT_LIST = a dll.a so so.@PNGLIB_MAJOR@@PNGLIB_MINOR@.@PNGLIB_RELEASE@ la sl dylib
+all: $(BUILT_SOURCES) config.h
+ $(MAKE) $(AM_MAKEFLAGS) all-am
+
+.SUFFIXES:
+.SUFFIXES: .chk .out .S .c .lo .log .o .obj .test .test$(EXEEXT) .trs
+am--refresh: Makefile
+ @:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+ $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --foreign Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ $(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+ $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+ @test -f $@ || rm -f stamp-h1
+ @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+ @rm -f stamp-h1
+ cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+ ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+ rm -f stamp-h1
+ touch $@
+
+distclean-hdr:
+ -rm -f config.h stamp-h1
+libpng.pc: $(top_builddir)/config.status $(srcdir)/libpng.pc.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+libpng-config: $(top_builddir)/config.status $(srcdir)/libpng-config.in
+ cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binPROGRAMS: $(bin_PROGRAMS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed 's/$(EXEEXT)$$//' | \
+ while read p p1; do if test -f $$p \
+ || test -f $$p1 \
+ ; then echo "$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n;h' \
+ -e 's|.*|.|' \
+ -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+ sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) files[d] = files[d] " " $$1; \
+ else { print "f", $$3 "/" $$4, $$1; } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binPROGRAMS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+ -e 's/$$/$(EXEEXT)/' \
+ `; \
+ test -n "$$list" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+ @list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+
+clean-checkPROGRAMS:
+ @list='$(check_PROGRAMS)'; test -n "$$list" || exit 0; \
+ echo " rm -f" $$list; \
+ rm -f $$list || exit $$?; \
+ test -n "$(EXEEXT)" || exit 0; \
+ list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+ echo " rm -f" $$list; \
+ rm -f $$list
+
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+ @$(NORMAL_INSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ list2=; for p in $$list; do \
+ if test -f $$p; then \
+ list2="$$list2 $$p"; \
+ else :; fi; \
+ done; \
+ test -z "$$list2" || { \
+ echo " $(MKDIR_P) '$(DESTDIR)$(libdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(libdir)" || exit 1; \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+ }
+
+uninstall-libLTLIBRARIES:
+ @$(NORMAL_UNINSTALL)
+ @list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+ $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+ done
+
+clean-libLTLIBRARIES:
+ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+ @list='$(lib_LTLIBRARIES)'; \
+ locs=`for p in $$list; do echo $$p; done | \
+ sed 's|^[^/]*$$|.|; s|/[^/]*$$||; s|$$|/so_locations|' | \
+ sort -u`; \
+ test -z "$$locs" || { \
+ echo rm -f $${locs}; \
+ rm -f $${locs}; \
+ }
+arm/$(am__dirstamp):
+ @$(MKDIR_P) arm
+ @: > arm/$(am__dirstamp)
+arm/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) arm/$(DEPDIR)
+ @: > arm/$(DEPDIR)/$(am__dirstamp)
+arm/arm_init.lo: arm/$(am__dirstamp) arm/$(DEPDIR)/$(am__dirstamp)
+arm/filter_neon.lo: arm/$(am__dirstamp) arm/$(DEPDIR)/$(am__dirstamp)
+arm/filter_neon_intrinsics.lo: arm/$(am__dirstamp) \
+ arm/$(DEPDIR)/$(am__dirstamp)
+mips/$(am__dirstamp):
+ @$(MKDIR_P) mips
+ @: > mips/$(am__dirstamp)
+mips/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) mips/$(DEPDIR)
+ @: > mips/$(DEPDIR)/$(am__dirstamp)
+mips/mips_init.lo: mips/$(am__dirstamp) mips/$(DEPDIR)/$(am__dirstamp)
+mips/filter_msa_intrinsics.lo: mips/$(am__dirstamp) \
+ mips/$(DEPDIR)/$(am__dirstamp)
+intel/$(am__dirstamp):
+ @$(MKDIR_P) intel
+ @: > intel/$(am__dirstamp)
+intel/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) intel/$(DEPDIR)
+ @: > intel/$(DEPDIR)/$(am__dirstamp)
+intel/intel_init.lo: intel/$(am__dirstamp) \
+ intel/$(DEPDIR)/$(am__dirstamp)
+intel/filter_sse2_intrinsics.lo: intel/$(am__dirstamp) \
+ intel/$(DEPDIR)/$(am__dirstamp)
+powerpc/$(am__dirstamp):
+ @$(MKDIR_P) powerpc
+ @: > powerpc/$(am__dirstamp)
+powerpc/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) powerpc/$(DEPDIR)
+ @: > powerpc/$(DEPDIR)/$(am__dirstamp)
+powerpc/powerpc_init.lo: powerpc/$(am__dirstamp) \
+ powerpc/$(DEPDIR)/$(am__dirstamp)
+powerpc/filter_vsx_intrinsics.lo: powerpc/$(am__dirstamp) \
+ powerpc/$(DEPDIR)/$(am__dirstamp)
+
+libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@.la: $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES) $(EXTRA_libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_DEPENDENCIES)
+ $(AM_V_CCLD)$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LINK) -rpath $(libdir) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS) $(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_LIBADD) $(LIBS)
+contrib/tools/$(am__dirstamp):
+ @$(MKDIR_P) contrib/tools
+ @: > contrib/tools/$(am__dirstamp)
+contrib/tools/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) contrib/tools/$(DEPDIR)
+ @: > contrib/tools/$(DEPDIR)/$(am__dirstamp)
+contrib/tools/png-fix-itxt.$(OBJEXT): contrib/tools/$(am__dirstamp) \
+ contrib/tools/$(DEPDIR)/$(am__dirstamp)
+
+png-fix-itxt$(EXEEXT): $(png_fix_itxt_OBJECTS) $(png_fix_itxt_DEPENDENCIES) $(EXTRA_png_fix_itxt_DEPENDENCIES)
+ @rm -f png-fix-itxt$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(png_fix_itxt_OBJECTS) $(png_fix_itxt_LDADD) $(LIBS)
+contrib/tools/pngcp.$(OBJEXT): contrib/tools/$(am__dirstamp) \
+ contrib/tools/$(DEPDIR)/$(am__dirstamp)
+
+pngcp$(EXEEXT): $(pngcp_OBJECTS) $(pngcp_DEPENDENCIES) $(EXTRA_pngcp_DEPENDENCIES)
+ @rm -f pngcp$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(pngcp_OBJECTS) $(pngcp_LDADD) $(LIBS)
+contrib/tools/pngfix.$(OBJEXT): contrib/tools/$(am__dirstamp) \
+ contrib/tools/$(DEPDIR)/$(am__dirstamp)
+
+pngfix$(EXEEXT): $(pngfix_OBJECTS) $(pngfix_DEPENDENCIES) $(EXTRA_pngfix_DEPENDENCIES)
+ @rm -f pngfix$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(pngfix_OBJECTS) $(pngfix_LDADD) $(LIBS)
+contrib/libtests/$(am__dirstamp):
+ @$(MKDIR_P) contrib/libtests
+ @: > contrib/libtests/$(am__dirstamp)
+contrib/libtests/$(DEPDIR)/$(am__dirstamp):
+ @$(MKDIR_P) contrib/libtests/$(DEPDIR)
+ @: > contrib/libtests/$(DEPDIR)/$(am__dirstamp)
+contrib/libtests/pngimage.$(OBJEXT): contrib/libtests/$(am__dirstamp) \
+ contrib/libtests/$(DEPDIR)/$(am__dirstamp)
+
+pngimage$(EXEEXT): $(pngimage_OBJECTS) $(pngimage_DEPENDENCIES) $(EXTRA_pngimage_DEPENDENCIES)
+ @rm -f pngimage$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(pngimage_OBJECTS) $(pngimage_LDADD) $(LIBS)
+contrib/libtests/pngstest.$(OBJEXT): contrib/libtests/$(am__dirstamp) \
+ contrib/libtests/$(DEPDIR)/$(am__dirstamp)
+
+pngstest$(EXEEXT): $(pngstest_OBJECTS) $(pngstest_DEPENDENCIES) $(EXTRA_pngstest_DEPENDENCIES)
+ @rm -f pngstest$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(pngstest_OBJECTS) $(pngstest_LDADD) $(LIBS)
+
+pngtest$(EXEEXT): $(pngtest_OBJECTS) $(pngtest_DEPENDENCIES) $(EXTRA_pngtest_DEPENDENCIES)
+ @rm -f pngtest$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(pngtest_OBJECTS) $(pngtest_LDADD) $(LIBS)
+contrib/libtests/pngunknown.$(OBJEXT): \
+ contrib/libtests/$(am__dirstamp) \
+ contrib/libtests/$(DEPDIR)/$(am__dirstamp)
+
+pngunknown$(EXEEXT): $(pngunknown_OBJECTS) $(pngunknown_DEPENDENCIES) $(EXTRA_pngunknown_DEPENDENCIES)
+ @rm -f pngunknown$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(pngunknown_OBJECTS) $(pngunknown_LDADD) $(LIBS)
+contrib/libtests/pngvalid.$(OBJEXT): contrib/libtests/$(am__dirstamp) \
+ contrib/libtests/$(DEPDIR)/$(am__dirstamp)
+
+pngvalid$(EXEEXT): $(pngvalid_OBJECTS) $(pngvalid_DEPENDENCIES) $(EXTRA_pngvalid_DEPENDENCIES)
+ @rm -f pngvalid$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(pngvalid_OBJECTS) $(pngvalid_LDADD) $(LIBS)
+contrib/libtests/timepng.$(OBJEXT): contrib/libtests/$(am__dirstamp) \
+ contrib/libtests/$(DEPDIR)/$(am__dirstamp)
+
+timepng$(EXEEXT): $(timepng_OBJECTS) $(timepng_DEPENDENCIES) $(EXTRA_timepng_DEPENDENCIES)
+ @rm -f timepng$(EXEEXT)
+ $(AM_V_CCLD)$(LINK) $(timepng_OBJECTS) $(timepng_LDADD) $(LIBS)
+install-binSCRIPTS: $(bin_SCRIPTS)
+ @$(NORMAL_INSTALL)
+ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+ done | \
+ sed -e 'p;s,.*/,,;n' \
+ -e 'h;s|.*|.|' \
+ -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+ $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+ { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+ if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+ if (++n[d] == $(am__install_max)) { \
+ print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+ else { print "f", d "/" $$4, $$1 } } \
+ END { for (d in files) print "f", d, files[d] }' | \
+ while read type dir files; do \
+ if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+ test -z "$$files" || { \
+ echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+ $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+ } \
+ ; done
+
+uninstall-binSCRIPTS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+ files=`for p in $$list; do echo "$$p"; done | \
+ sed -e 's,.*/,,;$(transform)'`; \
+ dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
+
+mostlyclean-compile:
+ -rm -f *.$(OBJEXT)
+ -rm -f arm/*.$(OBJEXT)
+ -rm -f arm/*.lo
+ -rm -f contrib/libtests/*.$(OBJEXT)
+ -rm -f contrib/tools/*.$(OBJEXT)
+ -rm -f intel/*.$(OBJEXT)
+ -rm -f intel/*.lo
+ -rm -f mips/*.$(OBJEXT)
+ -rm -f mips/*.lo
+ -rm -f powerpc/*.$(OBJEXT)
+ -rm -f powerpc/*.lo
+
+distclean-compile:
+ -rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/png.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngerror.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngget.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngmem.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngpread.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngread.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrio.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrtran.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngrutil.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngset.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtest.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngtrans.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwio.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwrite.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwtran.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pngwutil.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/arm_init.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/filter_neon.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@arm/$(DEPDIR)/filter_neon_intrinsics.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngimage.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngstest.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngunknown.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/pngvalid.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@contrib/libtests/$(DEPDIR)/timepng.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@contrib/tools/$(DEPDIR)/png-fix-itxt.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@contrib/tools/$(DEPDIR)/pngcp.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@contrib/tools/$(DEPDIR)/pngfix.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@intel/$(DEPDIR)/filter_sse2_intrinsics.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@intel/$(DEPDIR)/intel_init.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@mips/$(DEPDIR)/filter_msa_intrinsics.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@mips/$(DEPDIR)/mips_init.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@powerpc/$(DEPDIR)/filter_vsx_intrinsics.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@powerpc/$(DEPDIR)/powerpc_init.Plo@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+ @$(MKDIR_P) $(@D)
+ @echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
+
+.S.o:
+@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ $<
+
+.S.obj:
+@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCCAS_TRUE@ $(CPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(CPPASCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.S.lo:
+@am__fastdepCCAS_TRUE@ $(AM_V_CPPAS)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCCAS_TRUE@ $(LTCPPASCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCCAS_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCCAS_FALSE@ DEPDIR=$(DEPDIR) $(CCASDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCCAS_FALSE@ $(AM_V_CPPAS@am__nodep@)$(LTCPPASCOMPILE) -c -o $@ $<
+
+.c.o:
+@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
+
+.c.obj:
+@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
+@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
+@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@ $(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.lo$$||'`;\
+@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
+@am__fastdepCC_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(AM_V_CC)source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@ $(AM_V_CC@am__nodep@)$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+ -rm -rf arm/.libs arm/_libs
+ -rm -rf intel/.libs intel/_libs
+ -rm -rf mips/.libs mips/_libs
+ -rm -rf powerpc/.libs powerpc/_libs
+
+distclean-libtool:
+ -rm -f libtool config.lt
+install-man3: $(dist_man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(dist_man_MANS)'; \
+ test -n "$(man3dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.3[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man3:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man3dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.3[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
+install-man5: $(dist_man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(dist_man_MANS)'; \
+ test -n "$(man5dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.5[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man5:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man5dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.5[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+install-pkgconfigDATA: $(pkgconfig_DATA)
+ @$(NORMAL_INSTALL)
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+ done
+
+uninstall-pkgconfigDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
+install-nodist_pkgincludeHEADERS: $(nodist_pkginclude_HEADERS)
+ @$(NORMAL_INSTALL)
+ @list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
+ done
+
+uninstall-nodist_pkgincludeHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(nodist_pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)
+install-pkgincludeHEADERS: $(pkginclude_HEADERS)
+ @$(NORMAL_INSTALL)
+ @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pkgincludedir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pkgincludedir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(pkgincludedir)'"; \
+ $(INSTALL_HEADER) $$files "$(DESTDIR)$(pkgincludedir)" || exit $$?; \
+ done
+
+uninstall-pkgincludeHEADERS:
+ @$(NORMAL_UNINSTALL)
+ @list='$(pkginclude_HEADERS)'; test -n "$(pkgincludedir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ dir='$(DESTDIR)$(pkgincludedir)'; $(am__uninstall_files_from_dir)
+
+ID: $(am__tagged_files)
+ $(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-am
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ set x; \
+ here=`pwd`; \
+ $(am__define_uniq_tagged_files); \
+ shift; \
+ if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ if test $$# -gt 0; then \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ "$$@" $$unique; \
+ else \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$unique; \
+ fi; \
+ fi
+ctags: ctags-am
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+ $(am__define_uniq_tagged_files); \
+ test -z "$(CTAGS_ARGS)$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && $(am__cd) $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) "$$here"
+cscope: cscope.files
+ test ! -s cscope.files \
+ || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
+clean-cscope:
+ -rm -f cscope.files
+cscope.files: clean-cscope cscopelist
+cscopelist: cscopelist-am
+
+cscopelist-am: $(am__tagged_files)
+ list='$(am__tagged_files)'; \
+ case "$(srcdir)" in \
+ [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+ *) sdir=$(subdir)/$(srcdir) ;; \
+ esac; \
+ for i in $$list; do \
+ if test -f "$$i"; then \
+ echo "$(subdir)/$$i"; \
+ else \
+ echo "$$sdir/$$i"; \
+ fi; \
+ done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+ -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
+
+# Recover from deleted '.trs' file; this should ensure that
+# "rm -f foo.log; make foo.trs" re-run 'foo.test', and re-create
+# both 'foo.log' and 'foo.trs'. Break the recipe in two subshells
+# to avoid problems with "make -n".
+.log.trs:
+ rm -f $< $@
+ $(MAKE) $(AM_MAKEFLAGS) $<
+
+# Leading 'am--fnord' is there to ensure the list of targets does not
+# expand to empty, as could happen e.g. with make check TESTS=''.
+am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
+am--force-recheck:
+ @:
+
+$(TEST_SUITE_LOG): $(TEST_LOGS)
+ @$(am__set_TESTS_bases); \
+ am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
+ redo_bases=`for i in $$bases; do \
+ am__f_ok $$i.trs && am__f_ok $$i.log || echo $$i; \
+ done`; \
+ if test -n "$$redo_bases"; then \
+ redo_logs=`for i in $$redo_bases; do echo $$i.log; done`; \
+ redo_results=`for i in $$redo_bases; do echo $$i.trs; done`; \
+ if $(am__make_dryrun); then :; else \
+ rm -f $$redo_logs && rm -f $$redo_results || exit 1; \
+ fi; \
+ fi; \
+ if test -n "$$am__remaking_logs"; then \
+ echo "fatal: making $(TEST_SUITE_LOG): possible infinite" \
+ "recursion detected" >&2; \
+ elif test -n "$$redo_logs"; then \
+ am__remaking_logs=yes $(MAKE) $(AM_MAKEFLAGS) $$redo_logs; \
+ fi; \
+ if $(am__make_dryrun); then :; else \
+ st=0; \
+ errmsg="fatal: making $(TEST_SUITE_LOG): failed to create"; \
+ for i in $$redo_bases; do \
+ test -f $$i.trs && test -r $$i.trs \
+ || { echo "$$errmsg $$i.trs" >&2; st=1; }; \
+ test -f $$i.log && test -r $$i.log \
+ || { echo "$$errmsg $$i.log" >&2; st=1; }; \
+ done; \
+ test $$st -eq 0 || exit 1; \
+ fi
+ @$(am__sh_e_setup); $(am__tty_colors); $(am__set_TESTS_bases); \
+ ws='[ ]'; \
+ results=`for b in $$bases; do echo $$b.trs; done`; \
+ test -n "$$results" || results=/dev/null; \
+ all=` grep "^$$ws*:test-result:" $$results | wc -l`; \
+ pass=` grep "^$$ws*:test-result:$$ws*PASS" $$results | wc -l`; \
+ fail=` grep "^$$ws*:test-result:$$ws*FAIL" $$results | wc -l`; \
+ skip=` grep "^$$ws*:test-result:$$ws*SKIP" $$results | wc -l`; \
+ xfail=`grep "^$$ws*:test-result:$$ws*XFAIL" $$results | wc -l`; \
+ xpass=`grep "^$$ws*:test-result:$$ws*XPASS" $$results | wc -l`; \
+ error=`grep "^$$ws*:test-result:$$ws*ERROR" $$results | wc -l`; \
+ if test `expr $$fail + $$xpass + $$error` -eq 0; then \
+ success=true; \
+ else \
+ success=false; \
+ fi; \
+ br='==================='; br=$$br$$br$$br$$br; \
+ result_count () \
+ { \
+ if test x"$$1" = x"--maybe-color"; then \
+ maybe_colorize=yes; \
+ elif test x"$$1" = x"--no-color"; then \
+ maybe_colorize=no; \
+ else \
+ echo "$@: invalid 'result_count' usage" >&2; exit 4; \
+ fi; \
+ shift; \
+ desc=$$1 count=$$2; \
+ if test $$maybe_colorize = yes && test $$count -gt 0; then \
+ color_start=$$3 color_end=$$std; \
+ else \
+ color_start= color_end=; \
+ fi; \
+ echo "$${color_start}# $$desc $$count$${color_end}"; \
+ }; \
+ create_testsuite_report () \
+ { \
+ result_count $$1 "TOTAL:" $$all "$$brg"; \
+ result_count $$1 "PASS: " $$pass "$$grn"; \
+ result_count $$1 "SKIP: " $$skip "$$blu"; \
+ result_count $$1 "XFAIL:" $$xfail "$$lgn"; \
+ result_count $$1 "FAIL: " $$fail "$$red"; \
+ result_count $$1 "XPASS:" $$xpass "$$red"; \
+ result_count $$1 "ERROR:" $$error "$$mgn"; \
+ }; \
+ { \
+ echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" | \
+ $(am__rst_title); \
+ create_testsuite_report --no-color; \
+ echo; \
+ echo ".. contents:: :depth: 2"; \
+ echo; \
+ for b in $$bases; do echo $$b; done \
+ | $(am__create_global_log); \
+ } >$(TEST_SUITE_LOG).tmp || exit 1; \
+ mv $(TEST_SUITE_LOG).tmp $(TEST_SUITE_LOG); \
+ if $$success; then \
+ col="$$grn"; \
+ else \
+ col="$$red"; \
+ test x"$$VERBOSE" = x || cat $(TEST_SUITE_LOG); \
+ fi; \
+ echo "$${col}$$br$${std}"; \
+ echo "$${col}Testsuite summary for $(PACKAGE_STRING)$${std}"; \
+ echo "$${col}$$br$${std}"; \
+ create_testsuite_report --maybe-color; \
+ echo "$$col$$br$$std"; \
+ if $$success; then :; else \
+ echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}"; \
+ if test -n "$(PACKAGE_BUGREPORT)"; then \
+ echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}"; \
+ fi; \
+ echo "$$col$$br$$std"; \
+ fi; \
+ $$success || exit 1
+
+check-TESTS: $(check_PROGRAMS)
+ @list='$(RECHECK_LOGS)'; test -z "$$list" || rm -f $$list
+ @list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ trs_list=`for i in $$bases; do echo $$i.trs; done`; \
+ log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
+ exit $$?;
+recheck: all $(check_PROGRAMS)
+ @test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+ @set +e; $(am__set_TESTS_bases); \
+ bases=`for i in $$bases; do echo $$i; done \
+ | $(am__list_recheck_tests)` || exit 1; \
+ log_list=`for i in $$bases; do echo $$i.log; done`; \
+ log_list=`echo $$log_list`; \
+ $(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) \
+ am__force_recheck=am--force-recheck \
+ TEST_LOGS="$$log_list"; \
+ exit $$?
+tests/pngtest.log: tests/pngtest
+ @p='tests/pngtest'; \
+ b='tests/pngtest'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngtest-badpngs.log: tests/pngtest-badpngs
+ @p='tests/pngtest-badpngs'; \
+ b='tests/pngtest-badpngs'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-16-to-8.log: tests/pngvalid-gamma-16-to-8
+ @p='tests/pngvalid-gamma-16-to-8'; \
+ b='tests/pngvalid-gamma-16-to-8'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-alpha-mode.log: tests/pngvalid-gamma-alpha-mode
+ @p='tests/pngvalid-gamma-alpha-mode'; \
+ b='tests/pngvalid-gamma-alpha-mode'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-background.log: tests/pngvalid-gamma-background
+ @p='tests/pngvalid-gamma-background'; \
+ b='tests/pngvalid-gamma-background'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-expand16-alpha-mode.log: tests/pngvalid-gamma-expand16-alpha-mode
+ @p='tests/pngvalid-gamma-expand16-alpha-mode'; \
+ b='tests/pngvalid-gamma-expand16-alpha-mode'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-expand16-background.log: tests/pngvalid-gamma-expand16-background
+ @p='tests/pngvalid-gamma-expand16-background'; \
+ b='tests/pngvalid-gamma-expand16-background'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-expand16-transform.log: tests/pngvalid-gamma-expand16-transform
+ @p='tests/pngvalid-gamma-expand16-transform'; \
+ b='tests/pngvalid-gamma-expand16-transform'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-sbit.log: tests/pngvalid-gamma-sbit
+ @p='tests/pngvalid-gamma-sbit'; \
+ b='tests/pngvalid-gamma-sbit'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-threshold.log: tests/pngvalid-gamma-threshold
+ @p='tests/pngvalid-gamma-threshold'; \
+ b='tests/pngvalid-gamma-threshold'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-gamma-transform.log: tests/pngvalid-gamma-transform
+ @p='tests/pngvalid-gamma-transform'; \
+ b='tests/pngvalid-gamma-transform'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-progressive-size.log: tests/pngvalid-progressive-size
+ @p='tests/pngvalid-progressive-size'; \
+ b='tests/pngvalid-progressive-size'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-progressive-interlace-standard.log: tests/pngvalid-progressive-interlace-standard
+ @p='tests/pngvalid-progressive-interlace-standard'; \
+ b='tests/pngvalid-progressive-interlace-standard'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-transform.log: tests/pngvalid-transform
+ @p='tests/pngvalid-transform'; \
+ b='tests/pngvalid-transform'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-progressive-standard.log: tests/pngvalid-progressive-standard
+ @p='tests/pngvalid-progressive-standard'; \
+ b='tests/pngvalid-progressive-standard'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngvalid-standard.log: tests/pngvalid-standard
+ @p='tests/pngvalid-standard'; \
+ b='tests/pngvalid-standard'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngstest-1.8.log: tests/pngstest-1.8
+ @p='tests/pngstest-1.8'; \
+ b='tests/pngstest-1.8'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngstest-1.8-alpha.log: tests/pngstest-1.8-alpha
+ @p='tests/pngstest-1.8-alpha'; \
+ b='tests/pngstest-1.8-alpha'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngstest-linear.log: tests/pngstest-linear
+ @p='tests/pngstest-linear'; \
+ b='tests/pngstest-linear'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngstest-linear-alpha.log: tests/pngstest-linear-alpha
+ @p='tests/pngstest-linear-alpha'; \
+ b='tests/pngstest-linear-alpha'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngstest-none.log: tests/pngstest-none
+ @p='tests/pngstest-none'; \
+ b='tests/pngstest-none'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngstest-none-alpha.log: tests/pngstest-none-alpha
+ @p='tests/pngstest-none-alpha'; \
+ b='tests/pngstest-none-alpha'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngstest-sRGB.log: tests/pngstest-sRGB
+ @p='tests/pngstest-sRGB'; \
+ b='tests/pngstest-sRGB'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngstest-sRGB-alpha.log: tests/pngstest-sRGB-alpha
+ @p='tests/pngstest-sRGB-alpha'; \
+ b='tests/pngstest-sRGB-alpha'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngunknown-IDAT.log: tests/pngunknown-IDAT
+ @p='tests/pngunknown-IDAT'; \
+ b='tests/pngunknown-IDAT'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngunknown-discard.log: tests/pngunknown-discard
+ @p='tests/pngunknown-discard'; \
+ b='tests/pngunknown-discard'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngunknown-if-safe.log: tests/pngunknown-if-safe
+ @p='tests/pngunknown-if-safe'; \
+ b='tests/pngunknown-if-safe'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngunknown-sAPI.log: tests/pngunknown-sAPI
+ @p='tests/pngunknown-sAPI'; \
+ b='tests/pngunknown-sAPI'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngunknown-sTER.log: tests/pngunknown-sTER
+ @p='tests/pngunknown-sTER'; \
+ b='tests/pngunknown-sTER'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngunknown-save.log: tests/pngunknown-save
+ @p='tests/pngunknown-save'; \
+ b='tests/pngunknown-save'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngunknown-vpAg.log: tests/pngunknown-vpAg
+ @p='tests/pngunknown-vpAg'; \
+ b='tests/pngunknown-vpAg'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngimage-quick.log: tests/pngimage-quick
+ @p='tests/pngimage-quick'; \
+ b='tests/pngimage-quick'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+tests/pngimage-full.log: tests/pngimage-full
+ @p='tests/pngimage-full'; \
+ b='tests/pngimage-full'; \
+ $(am__check_pre) $(LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_LOG_DRIVER_FLAGS) $(LOG_DRIVER_FLAGS) -- $(LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+.test.log:
+ @p='$<'; \
+ $(am__set_b); \
+ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+ --log-file $$b.log --trs-file $$b.trs \
+ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+ "$$tst" $(AM_TESTS_FD_REDIRECT)
+@am__EXEEXT_TRUE@.test$(EXEEXT).log:
+@am__EXEEXT_TRUE@ @p='$<'; \
+@am__EXEEXT_TRUE@ $(am__set_b); \
+@am__EXEEXT_TRUE@ $(am__check_pre) $(TEST_LOG_DRIVER) --test-name "$$f" \
+@am__EXEEXT_TRUE@ --log-file $$b.log --trs-file $$b.trs \
+@am__EXEEXT_TRUE@ $(am__common_driver_flags) $(AM_TEST_LOG_DRIVER_FLAGS) $(TEST_LOG_DRIVER_FLAGS) -- $(TEST_LOG_COMPILE) \
+@am__EXEEXT_TRUE@ "$$tst" $(AM_TESTS_FD_REDIRECT)
+
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+ $(am__remove_distdir)
+ test -d "$(distdir)" || mkdir "$(distdir)"
+ @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+ list='$(DISTFILES)'; \
+ dist_files=`for file in $$list; do echo $$file; done | \
+ sed -e "s|^$$srcdirstrip/||;t" \
+ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+ case $$dist_files in \
+ */*) $(MKDIR_P) `echo "$$dist_files" | \
+ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+ sort -u` ;; \
+ esac; \
+ for file in $$dist_files; do \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+ else \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
+ || exit 1; \
+ fi; \
+ done
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$(top_distdir)" distdir="$(distdir)" \
+ dist-hook
+ -test -n "$(am__skip_mode_fix)" \
+ || find "$(distdir)" -type d ! -perm -755 \
+ -exec chmod u+rwx,go+rx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
+ $(am__post_remove_distdir)
+
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
+ $(am__post_remove_distdir)
+
+dist-lzip: distdir
+ tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
+ $(am__post_remove_distdir)
+dist-xz: distdir
+ tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
+ $(am__post_remove_distdir)
+
+dist-tarZ: distdir
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__post_remove_distdir)
+
+dist-shar: distdir
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
+ @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
+ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
+ $(am__post_remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__post_remove_distdir)
+
+dist dist-all:
+ $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
+ $(am__post_remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.lz*) \
+ lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
+ *.tar.xz*) \
+ xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir)
+ chmod u+w $(distdir)
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
+ chmod a-w $(distdir)
+ test -d $(distdir)/_build || exit 0; \
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && am__cwd=`pwd` \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
+ $(AM_DISTCHECK_CONFIGURE_FLAGS) \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+ && cd "$$am__cwd" \
+ || exit 1
+ $(am__post_remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+ @test -n '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: trying to run $@ with an empty' \
+ '$$(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ $(am__cd) '$(distuninstallcheck_dir)' || { \
+ echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
+ exit 1; \
+ }; \
+ test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+ $(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
+ $(MAKE) $(AM_MAKEFLAGS) check-TESTS
+check: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) check-am
+all-am: Makefile $(PROGRAMS) $(LTLIBRARIES) $(SCRIPTS) $(MANS) $(DATA) \
+ $(HEADERS) config.h
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(pkgincludedir)" "$(DESTDIR)$(pkgincludedir)"; do \
+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+ done
+install: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ if test -z '$(STRIP)'; then \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ install; \
+ else \
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+ fi
+mostlyclean-generic:
+ -test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
+ -test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
+ -test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+
+clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -rm -f arm/$(DEPDIR)/$(am__dirstamp)
+ -rm -f arm/$(am__dirstamp)
+ -rm -f contrib/libtests/$(DEPDIR)/$(am__dirstamp)
+ -rm -f contrib/libtests/$(am__dirstamp)
+ -rm -f contrib/tools/$(DEPDIR)/$(am__dirstamp)
+ -rm -f contrib/tools/$(am__dirstamp)
+ -rm -f intel/$(DEPDIR)/$(am__dirstamp)
+ -rm -f intel/$(am__dirstamp)
+ -rm -f mips/$(DEPDIR)/$(am__dirstamp)
+ -rm -f mips/$(am__dirstamp)
+ -rm -f powerpc/$(DEPDIR)/$(am__dirstamp)
+ -rm -f powerpc/$(am__dirstamp)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
+@DO_INSTALL_LIBPNG_CONFIG_FALSE@@DO_INSTALL_LINKS_FALSE@install-exec-hook:
+@DO_INSTALL_LIBPNG_PC_FALSE@@DO_INSTALL_LINKS_FALSE@install-data-hook:
+@DO_INSTALL_LIBPNG_CONFIG_FALSE@@DO_INSTALL_LIBPNG_PC_FALSE@@DO_INSTALL_LINKS_FALSE@uninstall-hook:
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-checkPROGRAMS clean-generic \
+ clean-libLTLIBRARIES clean-libtool mostlyclean-am
+
+distclean: distclean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f ./$(DEPDIR)/png.Plo
+ -rm -f ./$(DEPDIR)/pngerror.Plo
+ -rm -f ./$(DEPDIR)/pngget.Plo
+ -rm -f ./$(DEPDIR)/pngmem.Plo
+ -rm -f ./$(DEPDIR)/pngpread.Plo
+ -rm -f ./$(DEPDIR)/pngread.Plo
+ -rm -f ./$(DEPDIR)/pngrio.Plo
+ -rm -f ./$(DEPDIR)/pngrtran.Plo
+ -rm -f ./$(DEPDIR)/pngrutil.Plo
+ -rm -f ./$(DEPDIR)/pngset.Plo
+ -rm -f ./$(DEPDIR)/pngtest.Po
+ -rm -f ./$(DEPDIR)/pngtrans.Plo
+ -rm -f ./$(DEPDIR)/pngwio.Plo
+ -rm -f ./$(DEPDIR)/pngwrite.Plo
+ -rm -f ./$(DEPDIR)/pngwtran.Plo
+ -rm -f ./$(DEPDIR)/pngwutil.Plo
+ -rm -f arm/$(DEPDIR)/arm_init.Plo
+ -rm -f arm/$(DEPDIR)/filter_neon.Plo
+ -rm -f arm/$(DEPDIR)/filter_neon_intrinsics.Plo
+ -rm -f contrib/libtests/$(DEPDIR)/pngimage.Po
+ -rm -f contrib/libtests/$(DEPDIR)/pngstest.Po
+ -rm -f contrib/libtests/$(DEPDIR)/pngunknown.Po
+ -rm -f contrib/libtests/$(DEPDIR)/pngvalid.Po
+ -rm -f contrib/libtests/$(DEPDIR)/timepng.Po
+ -rm -f contrib/tools/$(DEPDIR)/png-fix-itxt.Po
+ -rm -f contrib/tools/$(DEPDIR)/pngcp.Po
+ -rm -f contrib/tools/$(DEPDIR)/pngfix.Po
+ -rm -f intel/$(DEPDIR)/filter_sse2_intrinsics.Plo
+ -rm -f intel/$(DEPDIR)/intel_init.Plo
+ -rm -f mips/$(DEPDIR)/filter_msa_intrinsics.Plo
+ -rm -f mips/$(DEPDIR)/mips_init.Plo
+ -rm -f powerpc/$(DEPDIR)/filter_vsx_intrinsics.Plo
+ -rm -f powerpc/$(DEPDIR)/powerpc_init.Plo
+ -rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+ distclean-hdr distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man install-nodist_pkgincludeHEADERS \
+ install-pkgconfigDATA install-pkgincludeHEADERS
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-data-hook
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-binSCRIPTS \
+ install-libLTLIBRARIES
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man3 install-man5
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f ./$(DEPDIR)/png.Plo
+ -rm -f ./$(DEPDIR)/pngerror.Plo
+ -rm -f ./$(DEPDIR)/pngget.Plo
+ -rm -f ./$(DEPDIR)/pngmem.Plo
+ -rm -f ./$(DEPDIR)/pngpread.Plo
+ -rm -f ./$(DEPDIR)/pngread.Plo
+ -rm -f ./$(DEPDIR)/pngrio.Plo
+ -rm -f ./$(DEPDIR)/pngrtran.Plo
+ -rm -f ./$(DEPDIR)/pngrutil.Plo
+ -rm -f ./$(DEPDIR)/pngset.Plo
+ -rm -f ./$(DEPDIR)/pngtest.Po
+ -rm -f ./$(DEPDIR)/pngtrans.Plo
+ -rm -f ./$(DEPDIR)/pngwio.Plo
+ -rm -f ./$(DEPDIR)/pngwrite.Plo
+ -rm -f ./$(DEPDIR)/pngwtran.Plo
+ -rm -f ./$(DEPDIR)/pngwutil.Plo
+ -rm -f arm/$(DEPDIR)/arm_init.Plo
+ -rm -f arm/$(DEPDIR)/filter_neon.Plo
+ -rm -f arm/$(DEPDIR)/filter_neon_intrinsics.Plo
+ -rm -f contrib/libtests/$(DEPDIR)/pngimage.Po
+ -rm -f contrib/libtests/$(DEPDIR)/pngstest.Po
+ -rm -f contrib/libtests/$(DEPDIR)/pngunknown.Po
+ -rm -f contrib/libtests/$(DEPDIR)/pngvalid.Po
+ -rm -f contrib/libtests/$(DEPDIR)/timepng.Po
+ -rm -f contrib/tools/$(DEPDIR)/png-fix-itxt.Po
+ -rm -f contrib/tools/$(DEPDIR)/pngcp.Po
+ -rm -f contrib/tools/$(DEPDIR)/pngfix.Po
+ -rm -f intel/$(DEPDIR)/filter_sse2_intrinsics.Plo
+ -rm -f intel/$(DEPDIR)/intel_init.Plo
+ -rm -f mips/$(DEPDIR)/filter_msa_intrinsics.Plo
+ -rm -f mips/$(DEPDIR)/mips_init.Plo
+ -rm -f powerpc/$(DEPDIR)/filter_vsx_intrinsics.Plo
+ -rm -f powerpc/$(DEPDIR)/powerpc_init.Plo
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+ uninstall-libLTLIBRARIES uninstall-man \
+ uninstall-nodist_pkgincludeHEADERS uninstall-pkgconfigDATA \
+ uninstall-pkgincludeHEADERS
+ @$(NORMAL_INSTALL)
+ $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
+uninstall-man: uninstall-man3 uninstall-man5
+
+.MAKE: all check check-am install install-am install-data-am \
+ install-exec-am install-strip uninstall-am
+
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles am--refresh check \
+ check-TESTS check-am clean clean-binPROGRAMS \
+ clean-checkPROGRAMS clean-cscope clean-generic \
+ clean-libLTLIBRARIES clean-libtool cscope cscopelist-am ctags \
+ ctags-am dist dist-all dist-bzip2 dist-gzip dist-hook \
+ dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
+ distclean distclean-compile distclean-generic distclean-hdr \
+ distclean-libtool distclean-tags distcleancheck distdir \
+ distuninstallcheck dvi dvi-am html html-am info info-am \
+ install install-am install-binPROGRAMS install-binSCRIPTS \
+ install-data install-data-am install-data-hook install-dvi \
+ install-dvi-am install-exec install-exec-am install-exec-hook \
+ install-html install-html-am install-info install-info-am \
+ install-libLTLIBRARIES install-man install-man3 install-man5 \
+ install-nodist_pkgincludeHEADERS install-pdf install-pdf-am \
+ install-pkgconfigDATA install-pkgincludeHEADERS install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool pdf pdf-am ps ps-am recheck tags tags-am \
+ uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-binSCRIPTS uninstall-hook uninstall-libLTLIBRARIES \
+ uninstall-man uninstall-man3 uninstall-man5 \
+ uninstall-nodist_pkgincludeHEADERS uninstall-pkgconfigDATA \
+ uninstall-pkgincludeHEADERS
+
+.PRECIOUS: Makefile
+
+
+$(PNGLIB_BASENAME).pc: libpng.pc
+ cp libpng.pc $@
+
+$(PNGLIB_BASENAME)-config: libpng-config
+ cp libpng-config $@
+
+scripts/sym.out scripts/vers.out: png.h pngconf.h pnglibconf.h
+scripts/prefix.out: png.h pngconf.h pnglibconf.out
+scripts/symbols.out: png.h pngconf.h $(srcdir)/scripts/pnglibconf.h.prebuilt
+scripts/intprefix.out: pnglibconf.h
+
+libpng.sym: scripts/sym.out
+ rm -f $@
+ cp $? $@
+libpng.vers: scripts/vers.out
+ rm -f $@
+ cp $? $@
+
+# Rename functions in scripts/prefix.out with a PNG_PREFIX prefix.
+# Rename macros in scripts/macro.lst from PNG_PREFIXpng_ to PNG_ (the actual
+# implementation of the macro).
+@DO_PNG_PREFIX_TRUE@pnglibconf.h: pnglibconf.out scripts/prefix.out scripts/macro.lst
+@DO_PNG_PREFIX_TRUE@ rm -f $@
+@DO_PNG_PREFIX_TRUE@ $(AWK) 's==0 && NR>1{print prev}\
+@DO_PNG_PREFIX_TRUE@ s==0{prev=$$0}\
+@DO_PNG_PREFIX_TRUE@ s==1{print "#define", $$1, "@PNG_PREFIX@" $$1}\
+@DO_PNG_PREFIX_TRUE@ s==2{print "#define @PNG_PREFIX@png_" $$1, "PNG_" $$1}\
+@DO_PNG_PREFIX_TRUE@ END{print prev}' s=0 pnglibconf.out s=1 scripts/prefix.out\
+@DO_PNG_PREFIX_TRUE@ s=2 ${srcdir}/scripts/macro.lst >pnglibconf.tf8
+@DO_PNG_PREFIX_TRUE@ mv pnglibconf.tf8 $@
+
+@DO_PNG_PREFIX_TRUE@pngprefix.h: scripts/intprefix.out
+@DO_PNG_PREFIX_TRUE@ rm -f pngprefix.tf1
+@DO_PNG_PREFIX_TRUE@ $(AWK) '{print "#define", $$1, "@PNG_PREFIX@" $$1}' $? >pngprefix.tf1
+@DO_PNG_PREFIX_TRUE@ mv pngprefix.tf1 $@
+@DO_PNG_PREFIX_FALSE@pnglibconf.h: pnglibconf.out
+@DO_PNG_PREFIX_FALSE@ rm -f $@
+@DO_PNG_PREFIX_FALSE@ cp $? $@
+
+@DO_PNG_PREFIX_FALSE@pngprefix.h: # is empty
+@DO_PNG_PREFIX_FALSE@ :>$@
+
+$(srcdir)/scripts/pnglibconf.h.prebuilt:
+ @echo "Attempting to build $@" >&2
+ @echo "This is a machine generated file, but if you want to make" >&2
+ @echo "a new one simply make 'scripts/pnglibconf.out', copy that" >&2
+ @echo "AND set PNG_ZLIB_VERNUM to 0 (you MUST do this)" >&2
+ @exit 1
+
+# The following is necessary to ensure that the local pnglibconf.h is used, not
+# an installed one (this can happen immediately after on a clean system if
+# 'make test' is the first thing the user does.) Only files which include
+# one of the png source files (typically png.h or pngpriv.h) need to be listed
+# here:
+pngtest.o: pnglibconf.h
+
+contrib/libtests/makepng.o: pnglibconf.h
+contrib/libtests/pngstest.o: pnglibconf.h
+contrib/libtests/pngunknown.o: pnglibconf.h
+contrib/libtests/pngimage.o: pnglibconf.h
+contrib/libtests/pngvalid.o: pnglibconf.h
+contrib/libtests/readpng.o: pnglibconf.h
+contrib/libtests/tarith.o: pnglibconf.h
+contrib/libtests/timepng.o: pnglibconf.h
+
+contrib/tools/makesRGB.o: pnglibconf.h
+contrib/tools/pngfix.o: pnglibconf.h
+contrib/tools/pngcp.o: pnglibconf.h
+
+.c.out:
+ rm -f $@ $*.tf[12]
+ test -d scripts || mkdir scripts || test -d scripts
+ $(DFNCPP) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES)\
+ $(CPPFLAGS) $(SYMBOL_CFLAGS) $< > $*.tf1
+ $(AWK) -f "${srcdir}/scripts/dfn.awk" out="$*.tf2" $*.tf1 1>&2
+ rm -f $*.tf1
+ mv $*.tf2 $@
+
+# The .c file for pnglibconf.h is machine generated
+pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h pngusr.dfa $(DFA_XTRA)
+ rm -f $@ $*.tf[45]
+ $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf4 version=search\
+ ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\
+ ${srcdir}/pngusr.dfa $(DFA_XTRA) 1>&2
+ $(AWK) -f ${srcdir}/scripts/options.awk out=$*.tf5 $*.tf4 1>&2
+ rm $*.tf4
+ mv $*.tf5 $@
+
+# Symbol checks (.def and .out files should match)
+scripts/symbols.chk: scripts/checksym.awk scripts/symbols.def scripts/symbols.out
+
+.out.chk:
+ rm -f $@ $*.new
+ $(AWK) -f ${srcdir}/scripts/checksym.awk ${srcdir}/scripts/${*F}.def\
+ of="$*.new" $< >&2
+ mv $*.new $@
+
+# used on demand to regenerate the standard header, CPPFLAGS should
+# be empty - no non-standard defines
+scripts/pnglibconf.c: scripts/pnglibconf.dfa scripts/options.awk pngconf.h
+ rm -f $@ pnglibconf.tf[67]
+ test -z "$(CPPFLAGS)"
+ echo "com @PNGLIB_VERSION@ STANDARD API DEFINITION" |\
+ $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf6\
+ logunsupported=1 version=search ${srcdir}/pngconf.h -\
+ ${srcdir}/scripts/pnglibconf.dfa 1>&2
+ $(AWK) -f ${srcdir}/scripts/options.awk out=pnglibconf.tf7\
+ pnglibconf.tf6 1>&2
+ rm pnglibconf.tf6
+ mv pnglibconf.tf7 $@
+
+$(libpng@PNGLIB_MAJOR@@PNGLIB_MINOR@_la_OBJECTS): png.h pngconf.h \
+ pnglibconf.h pngpriv.h pngdebug.h pnginfo.h pngstruct.h pngprefix.h
+
+test: check-am
+
+# Extra checks
+check: scripts/symbols.chk
+
+# Don't distribute the generated script files
+dist-hook:
+ cd '$(top_distdir)'; rm -f $(SCRIPT_CLEANFILES)
+
+# Make links between installed files with release-specific names and the generic
+# file names. If this install rule is run the generic names will be deleted and
+# recreated - this has obvious issues for systems with multiple installations.
+
+install-header-links:
+ @set -ex; cd '$(DESTDIR)$(includedir)'; for f in $(HEADERS); do \
+ rm -f "$$f"; $(LN_S) "$(PNGLIB_BASENAME)/$$f" "$$f"; done
+
+uninstall-header-links:
+ cd '$(DESTDIR)$(includedir)'; rm -f $(HEADERS)
+
+install-libpng-pc:
+ @set -ex; cd '$(DESTDIR)$(pkgconfigdir)'; rm -f libpng.pc; \
+ $(LN_S) '$(PNGLIB_BASENAME).pc' libpng.pc
+
+uninstall-libpng-pc:
+ rm -f '$(DESTDIR)$(pkgconfigdir)/libpng.pc'
+
+install-library-links:
+ @set -x; cd '$(DESTDIR)$(libdir)';\
+ for ext in $(EXT_LIST); do\
+ rm -f "libpng.$$ext";\
+ if test -f "$(PNGLIB_BASENAME).$$ext"; then\
+ $(LN_S) "$(PNGLIB_BASENAME).$$ext" "libpng.$$ext" || exit 1;\
+ fi;\
+ done
+
+uninstall-library-links:
+ @set -x; cd '$(DESTDIR)$(libdir)'; for ext in $(EXT_LIST); do\
+ rm -f "libpng.$$ext"; done
+
+install-libpng-config:
+ @set -ex; cd '$(DESTDIR)$(bindir)'; rm -f libpng-config; \
+ $(LN_S) '$(PNGLIB_BASENAME)-config' libpng-config
+
+uninstall-libpng-config:
+ rm -f '$(DESTDIR)$(bindir)/libpng-config'
+
+# If --enable-unversioned-links is specified the header and lib file links
+# will be automatically made on a 'make install':
+
+@DO_INSTALL_LINKS_TRUE@install-data-hook: install-header-links
+@DO_INSTALL_LINKS_TRUE@uninstall-hook: uninstall-header-links
+@DO_INSTALL_LINKS_TRUE@install-exec-hook: install-library-links
+@DO_INSTALL_LINKS_TRUE@uninstall-hook: uninstall-library-links
+
+# Likewise, --install-pc causes libpng.pc to be constructed:
+
+@DO_INSTALL_LIBPNG_PC_TRUE@install-data-hook: install-libpng-pc
+@DO_INSTALL_LIBPNG_PC_TRUE@uninstall-hook: uninstall-libpng-pc
+
+# And --install-config:
+
+@DO_INSTALL_LIBPNG_CONFIG_TRUE@install-exec-hook: install-libpng-config
+@DO_INSTALL_LIBPNG_CONFIG_TRUE@uninstall-hook: uninstall-libpng-config
+
+# The following addition ensures that 'make all' always builds the test programs
+# too. It used to, but some change either in libpng or configure stopped this
+# working.
+all-am: $(check_PROGRAMS)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/README b/README
index 0da5a5e..f098b27 100644
--- a/README
+++ b/README
@@ -1,4 +1,4 @@
-README for libpng version 1.6.34 - September 29, 2017 (shared library 16.0)
+README for libpng version 1.6.35 - July 15, 2018 (shared library 16.0)
See the note about version numbers near the top of png.h
See INSTALL for instructions on how to install libpng.
@@ -118,7 +118,7 @@
Send comments/corrections/commendations to png-mng-implement at
lists.sourceforge.net (subscription required; visit
https://lists.sourceforge.net/lists/listinfo/png-mng-implement
-to subscribe) or to glennrp at users.sourceforge.net
+to subscribe).
You can't reach Guy, the original libpng author, at the addresses
given in previous versions of this document. He and Andreas will
diff --git a/aclocal.m4 b/aclocal.m4
new file mode 100644
index 0000000..bc18c34
--- /dev/null
+++ b/aclocal.m4
@@ -0,0 +1,1196 @@
+# generated automatically by aclocal 1.16.1 -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically 'autoreconf'.])])
+
+# Copyright (C) 2002-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_AUTOMAKE_VERSION(VERSION)
+# ----------------------------
+# Automake X.Y traces this macro to ensure aclocal.m4 has been
+# generated from the m4 files accompanying Automake X.Y.
+# (This private macro should not be called outside this file.)
+AC_DEFUN([AM_AUTOMAKE_VERSION],
+[am__api_version='1.16'
+dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
+dnl require some minimum version. Point them to the right macro.
+m4_if([$1], [1.16.1], [],
+ [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
+])
+
+# _AM_AUTOCONF_VERSION(VERSION)
+# -----------------------------
+# aclocal traces this macro to find the Autoconf version.
+# This is a private macro too. Using m4_define simplifies
+# the logic in aclocal, which can simply ignore this definition.
+m4_define([_AM_AUTOCONF_VERSION], [])
+
+# AM_SET_CURRENT_AUTOMAKE_VERSION
+# -------------------------------
+# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
+# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
+AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
+[AM_AUTOMAKE_VERSION([1.16.1])dnl
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
+
+# Figure out how to run the assembler. -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_AS
+# ----------
+AC_DEFUN([AM_PROG_AS],
+[# By default we simply use the C compiler to build assembly code.
+AC_REQUIRE([AC_PROG_CC])
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+AC_ARG_VAR([CCAS], [assembler compiler command (defaults to CC)])
+AC_ARG_VAR([CCASFLAGS], [assembler compiler flags (defaults to CFLAGS)])
+_AM_IF_OPTION([no-dependencies],, [_AM_DEPENDENCIES([CCAS])])dnl
+])
+
+# AM_AUX_DIR_EXPAND -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
+# $ac_aux_dir to '$srcdir/foo'. In other projects, it is set to
+# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
+#
+# Of course, Automake must honor this variable whenever it calls a
+# tool from the auxiliary directory. The problem is that $srcdir (and
+# therefore $ac_aux_dir as well) can be either absolute or relative,
+# depending on how configure is run. This is pretty annoying, since
+# it makes $ac_aux_dir quite unusable in subdirectories: in the top
+# source directory, any form will work fine, but in subdirectories a
+# relative path needs to be adjusted first.
+#
+# $ac_aux_dir/missing
+# fails when called from a subdirectory if $ac_aux_dir is relative
+# $top_srcdir/$ac_aux_dir/missing
+# fails if $ac_aux_dir is absolute,
+# fails when called from a subdirectory in a VPATH build with
+# a relative $ac_aux_dir
+#
+# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
+# are both prefixed by $srcdir. In an in-source build this is usually
+# harmless because $srcdir is '.', but things will broke when you
+# start a VPATH build or use an absolute $srcdir.
+#
+# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
+# iff we strip the leading $srcdir from $ac_aux_dir. That would be:
+# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
+# and then we would define $MISSING as
+# MISSING="\${SHELL} $am_aux_dir/missing"
+# This will work as long as MISSING is not called from configure, because
+# unfortunately $(top_srcdir) has no meaning in configure.
+# However there are other variables, like CC, which are often used in
+# configure, and could therefore not use this "fixed" $ac_aux_dir.
+#
+# Another solution, used here, is to always expand $ac_aux_dir to an
+# absolute PATH. The drawback is that using absolute paths prevent a
+# configured tree to be moved without reconfiguration.
+
+AC_DEFUN([AM_AUX_DIR_EXPAND],
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+])
+
+# AM_CONDITIONAL -*- Autoconf -*-
+
+# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_CONDITIONAL(NAME, SHELL-CONDITION)
+# -------------------------------------
+# Define a conditional.
+AC_DEFUN([AM_CONDITIONAL],
+[AC_PREREQ([2.52])dnl
+ m4_if([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])],
+ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
+AC_SUBST([$1_TRUE])dnl
+AC_SUBST([$1_FALSE])dnl
+_AM_SUBST_NOTMAKE([$1_TRUE])dnl
+_AM_SUBST_NOTMAKE([$1_FALSE])dnl
+m4_define([_AM_COND_VALUE_$1], [$2])dnl
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi
+AC_CONFIG_COMMANDS_PRE(
+[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
+ AC_MSG_ERROR([[conditional "$1" was never defined.
+Usually this means the macro was only invoked conditionally.]])
+fi])])
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+
+# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
+# written in clear, in which case automake, when reading aclocal.m4,
+# will think it sees a *use*, and therefore will trigger all it's
+# C support machinery. Also note that it means that autoscan, seeing
+# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
+
+
+# _AM_DEPENDENCIES(NAME)
+# ----------------------
+# See how the compiler implements dependency checking.
+# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
+# We try a few techniques and use that to set a single cache variable.
+#
+# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
+# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
+# dependency, and given that the user is not expected to run this macro,
+# just rely on AC_PROG_CC.
+AC_DEFUN([_AM_DEPENDENCIES],
+[AC_REQUIRE([AM_SET_DEPDIR])dnl
+AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
+AC_REQUIRE([AM_MAKE_INCLUDE])dnl
+AC_REQUIRE([AM_DEP_TRACK])dnl
+
+m4_if([$1], [CC], [depcc="$CC" am_compiler_list=],
+ [$1], [CXX], [depcc="$CXX" am_compiler_list=],
+ [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
+ [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
+ [$1], [UPC], [depcc="$UPC" am_compiler_list=],
+ [$1], [GCJ], [depcc="$GCJ" am_compiler_list='gcc3 gcc'],
+ [depcc="$$1" am_compiler_list=])
+
+AC_CACHE_CHECK([dependency style of $depcc],
+ [am_cv_$1_dependencies_compiler_type],
+[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_$1_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
+ fi
+ am__universal=false
+ m4_case([$1], [CC],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac],
+ [CXX],
+ [case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac])
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_$1_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_$1_dependencies_compiler_type=none
+fi
+])
+AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
+AM_CONDITIONAL([am__fastdep$1], [
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
+])
+
+
+# AM_SET_DEPDIR
+# -------------
+# Choose a directory name for dependency files.
+# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
+AC_DEFUN([AM_SET_DEPDIR],
+[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
+])
+
+
+# AM_DEP_TRACK
+# ------------
+AC_DEFUN([AM_DEP_TRACK],
+[AC_ARG_ENABLE([dependency-tracking], [dnl
+AS_HELP_STRING(
+ [--enable-dependency-tracking],
+ [do not reject slow dependency extractors])
+AS_HELP_STRING(
+ [--disable-dependency-tracking],
+ [speeds up one-time build])])
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
+AC_SUBST([AMDEPBACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
+AC_SUBST([am__nodep])dnl
+_AM_SUBST_NOTMAKE([am__nodep])dnl
+])
+
+# Generate code to set up dependency tracking. -*- Autoconf -*-
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_OUTPUT_DEPENDENCY_COMMANDS
+# ------------------------------
+AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
+[{
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ # TODO: see whether this extra hack can be removed once we start
+ # requiring Autoconf 2.70 or later.
+ AS_CASE([$CONFIG_FILES],
+ [*\'*], [eval set x "$CONFIG_FILES"],
+ [*], [set x $CONFIG_FILES])
+ shift
+ # Used to flag and report bootstrapping failures.
+ am_rc=0
+ for am_mf
+ do
+ # Strip MF so we end up with the name of the file.
+ am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile which includes
+ # dependency-tracking related rules and includes.
+ # Grep'ing the whole file directly is not great: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+ || continue
+ am_dirpart=`AS_DIRNAME(["$am_mf"])`
+ am_filepart=`AS_BASENAME(["$am_mf"])`
+ AM_RUN_LOG([cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles]) || am_rc=$?
+ done
+ if test $am_rc -ne 0; then
+ AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
+ for automatic dependency tracking. Try re-running configure with the
+ '--disable-dependency-tracking' option to at least be able to build
+ the package (albeit without support for automatic dependency tracking).])
+ fi
+ AS_UNSET([am_dirpart])
+ AS_UNSET([am_filepart])
+ AS_UNSET([am_mf])
+ AS_UNSET([am_rc])
+ rm -f conftest-deps.mk
+}
+])# _AM_OUTPUT_DEPENDENCY_COMMANDS
+
+
+# AM_OUTPUT_DEPENDENCY_COMMANDS
+# -----------------------------
+# This macro should only be invoked once -- use via AC_REQUIRE.
+#
+# This code is only required when automatic dependency tracking is enabled.
+# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
+# order to bootstrap the dependency handling code.
+AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
+[AC_CONFIG_COMMANDS([depfiles],
+ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
+ [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
+
+# Do all the work for Automake. -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This macro actually does too much. Some checks are only needed if
+# your package does certain things. But this isn't really a big deal.
+
+dnl Redefine AC_PROG_CC to automatically invoke _AM_PROG_CC_C_O.
+m4_define([AC_PROG_CC],
+m4_defn([AC_PROG_CC])
+[_AM_PROG_CC_C_O
+])
+
+# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
+# AM_INIT_AUTOMAKE([OPTIONS])
+# -----------------------------------------------
+# The call with PACKAGE and VERSION arguments is the old style
+# call (pre autoconf-2.50), which is being phased out. PACKAGE
+# and VERSION should now be passed to AC_INIT and removed from
+# the call to AM_INIT_AUTOMAKE.
+# We support both call styles for the transition. After
+# the next Automake release, Autoconf can make the AC_INIT
+# arguments mandatory, and then we can depend on a new Autoconf
+# release and drop the old call support.
+AC_DEFUN([AM_INIT_AUTOMAKE],
+[AC_PREREQ([2.65])dnl
+dnl Autoconf wants to disallow AM_ names. We explicitly allow
+dnl the ones we care about.
+m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
+AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
+AC_REQUIRE([AC_PROG_INSTALL])dnl
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+AC_SUBST([CYGPATH_W])
+
+# Define the identity of the package.
+dnl Distinguish between old-style and new-style calls.
+m4_ifval([$2],
+[AC_DIAGNOSE([obsolete],
+ [$0: two- and three-arguments forms are deprecated.])
+m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
+ AC_SUBST([PACKAGE], [$1])dnl
+ AC_SUBST([VERSION], [$2])],
+[_AM_SET_OPTIONS([$1])dnl
+dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
+m4_if(
+ m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
+ [ok:ok],,
+ [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
+ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
+ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
+
+_AM_IF_OPTION([no-define],,
+[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
+ AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
+
+# Some tools Automake needs.
+AC_REQUIRE([AM_SANITY_CHECK])dnl
+AC_REQUIRE([AC_ARG_PROGRAM])dnl
+AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
+AM_MISSING_PROG([AUTOCONF], [autoconf])
+AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
+AM_MISSING_PROG([AUTOHEADER], [autoheader])
+AM_MISSING_PROG([MAKEINFO], [makeinfo])
+AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
+AC_REQUIRE([AC_PROG_MKDIR_P])dnl
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([AC_PROG_MAKE_SET])dnl
+AC_REQUIRE([AM_SET_LEADING_DOT])dnl
+_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
+ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
+ [_AM_PROG_TAR([v7])])])
+_AM_IF_OPTION([no-dependencies],,
+[AC_PROVIDE_IFELSE([AC_PROG_CC],
+ [_AM_DEPENDENCIES([CC])],
+ [m4_define([AC_PROG_CC],
+ m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [_AM_DEPENDENCIES([CXX])],
+ [m4_define([AC_PROG_CXX],
+ m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJC],
+ [_AM_DEPENDENCIES([OBJC])],
+ [m4_define([AC_PROG_OBJC],
+ m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
+AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
+ [_AM_DEPENDENCIES([OBJCXX])],
+ [m4_define([AC_PROG_OBJCXX],
+ m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])dnl
+])
+AC_REQUIRE([AM_SILENT_RULES])dnl
+dnl The testsuite driver may need to know about EXEEXT, so add the
+dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen. This
+dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
+AC_CONFIG_COMMANDS_PRE(dnl
+[m4_provide_if([_AM_COMPILER_EXEEXT],
+ [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
+ fi
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
+
+dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
+dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
+dnl mangled by Autoconf and run in a shell conditional statement.
+m4_define([_AC_COMPILER_EXEEXT],
+m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
+
+# When config.status generates a header, we must update the stamp-h file.
+# This file resides in the same directory as the config header
+# that is generated. The stamp files are numbered to have different names.
+
+# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
+# loop where config.status creates the headers, so we can generate
+# our stamp files there.
+AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
+[# Compute $1's index in $config_headers.
+_am_arg=$1
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_SH
+# ------------------
+# Define $install_sh.
+AC_DEFUN([AM_PROG_INSTALL_SH],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+AC_SUBST([install_sh])])
+
+# Copyright (C) 2003-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# Check whether the underlying file-system supports filenames
+# with a leading dot. For instance MS-DOS doesn't.
+AC_DEFUN([AM_SET_LEADING_DOT],
+[rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+AC_SUBST([am__leading_dot])])
+
+# Add --enable-maintainer-mode option to configure. -*- Autoconf -*-
+# From Jim Meyering
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAINTAINER_MODE([DEFAULT-MODE])
+# ----------------------------------
+# Control maintainer-specific portions of Makefiles.
+# Default is to disable them, unless 'enable' is passed literally.
+# For symmetry, 'disable' may be passed as well. Anyway, the user
+# can override the default with the --enable/--disable switch.
+AC_DEFUN([AM_MAINTAINER_MODE],
+[m4_case(m4_default([$1], [disable]),
+ [enable], [m4_define([am_maintainer_other], [disable])],
+ [disable], [m4_define([am_maintainer_other], [enable])],
+ [m4_define([am_maintainer_other], [enable])
+ m4_warn([syntax], [unexpected argument to AM@&t@_MAINTAINER_MODE: $1])])
+AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode's default is 'disable' unless 'enable' is passed
+ AC_ARG_ENABLE([maintainer-mode],
+ [AS_HELP_STRING([--]am_maintainer_other[-maintainer-mode],
+ am_maintainer_other[ make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer])],
+ [USE_MAINTAINER_MODE=$enableval],
+ [USE_MAINTAINER_MODE=]m4_if(am_maintainer_other, [enable], [no], [yes]))
+ AC_MSG_RESULT([$USE_MAINTAINER_MODE])
+ AM_CONDITIONAL([MAINTAINER_MODE], [test $USE_MAINTAINER_MODE = yes])
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST([MAINT])dnl
+]
+)
+
+# Check to see how 'make' treats includes. -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MAKE_INCLUDE()
+# -----------------
+# Check whether make has an 'include' directive that can support all
+# the idioms we need for our automatic dependency tracking code.
+AC_DEFUN([AM_MAKE_INCLUDE],
+[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
+cat > confinc.mk << 'END'
+am__doit:
+ @echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+ AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
+ AS_CASE([$?:`cat confinc.out 2>/dev/null`],
+ ['0:this is the am__doit target'],
+ [AS_CASE([$s],
+ [BSD], [am__include='.include' am__quote='"'],
+ [am__include='include' am__quote=''])])
+ if test "$am__include" != "#"; then
+ _am_result="yes ($s style)"
+ break
+ fi
+done
+rm -f confinc.* confmf.*
+AC_MSG_RESULT([${_am_result}])
+AC_SUBST([am__include])])
+AC_SUBST([am__quote])])
+
+# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
+
+# Copyright (C) 1997-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_MISSING_PROG(NAME, PROGRAM)
+# ------------------------------
+AC_DEFUN([AM_MISSING_PROG],
+[AC_REQUIRE([AM_MISSING_HAS_RUN])
+$1=${$1-"${am_missing_run}$2"}
+AC_SUBST($1)])
+
+# AM_MISSING_HAS_RUN
+# ------------------
+# Define MISSING if not defined so far and test if it is modern enough.
+# If it is, set am_missing_run to use it, otherwise, to nothing.
+AC_DEFUN([AM_MISSING_HAS_RUN],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([missing])dnl
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ AC_MSG_WARN(['missing' script is too old or missing])
+fi
+])
+
+# Helper functions for option handling. -*- Autoconf -*-
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_MANGLE_OPTION(NAME)
+# -----------------------
+AC_DEFUN([_AM_MANGLE_OPTION],
+[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
+
+# _AM_SET_OPTION(NAME)
+# --------------------
+# Set option NAME. Presently that only means defining a flag for this option.
+AC_DEFUN([_AM_SET_OPTION],
+[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
+
+# _AM_SET_OPTIONS(OPTIONS)
+# ------------------------
+# OPTIONS is a space-separated list of Automake options.
+AC_DEFUN([_AM_SET_OPTIONS],
+[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
+
+# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
+# -------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+AC_DEFUN([_AM_IF_OPTION],
+[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_CC_C_O
+# ---------------
+# Like AC_PROG_CC_C_O, but changed for automake. We rewrite AC_PROG_CC
+# to automatically call this.
+AC_DEFUN([_AM_PROG_CC_C_O],
+[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
+AC_REQUIRE_AUX_FILE([compile])dnl
+AC_LANG_PUSH([C])dnl
+AC_CACHE_CHECK(
+ [whether $CC understands -c and -o together],
+ [am_cv_prog_cc_c_o],
+ [AC_LANG_CONFTEST([AC_LANG_PROGRAM([])])
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if AM_RUN_LOG([$CC -c conftest.$ac_ext -o conftest2.$ac_objext]) \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i])
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+AC_LANG_POP([C])])
+
+# For backward compatibility.
+AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_RUN_LOG(COMMAND)
+# -------------------
+# Run COMMAND, save the exit status in ac_status, and log it.
+# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
+AC_DEFUN([AM_RUN_LOG],
+[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
+ ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ (exit $ac_status); }])
+
+# Check to make sure that the build environment is sane. -*- Autoconf -*-
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SANITY_CHECK
+# ---------------
+AC_DEFUN([AM_SANITY_CHECK],
+[AC_MSG_CHECKING([whether build environment is sane])
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[[\\\"\#\$\&\'\`$am_lf]]*)
+ AC_MSG_ERROR([unsafe absolute working directory name]);;
+esac
+case $srcdir in
+ *[[\\\"\#\$\&\'\`$am_lf\ \ ]]*)
+ AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$[*]" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$[*]" != "X $srcdir/configure conftest.file" \
+ && test "$[*]" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+ alias in your environment])
+ fi
+ if test "$[2]" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$[2]" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+AC_MSG_RESULT([yes])
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+AC_CONFIG_COMMANDS_PRE(
+ [AC_MSG_CHECKING([that generated files are newer than configure])
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ AC_MSG_RESULT([done])])
+rm -f conftest.file
+])
+
+# Copyright (C) 2009-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Enable less verbose build rules; with the default set to DEFAULT
+# ("yes" being less verbose, "no" or empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_ARG_ENABLE([silent-rules], [dnl
+AS_HELP_STRING(
+ [--enable-silent-rules],
+ [less verbose build output (undo: "make V=1")])
+AS_HELP_STRING(
+ [--disable-silent-rules],
+ [verbose build output (undo: "make V=0")])dnl
+])
+case $enable_silent_rules in @%:@ (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
+esac
+dnl
+dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
+dnl do not support nested variable expansions.
+dnl See automake bug#9928 and bug#10237.
+am_make=${MAKE-make}
+AC_CACHE_CHECK([whether $am_make supports nested variables],
+ [am_cv_make_support_nested_variables],
+ [if AS_ECHO([['TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit']]) | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi])
+if test $am_cv_make_support_nested_variables = yes; then
+ dnl Using '$V' instead of '$(V)' breaks IRIX make.
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AC_SUBST([AM_V])dnl
+AM_SUBST_NOTMAKE([AM_V])dnl
+AC_SUBST([AM_DEFAULT_V])dnl
+AM_SUBST_NOTMAKE([AM_DEFAULT_V])dnl
+AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
+AM_BACKSLASH='\'
+AC_SUBST([AM_BACKSLASH])dnl
+_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+])
+
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# AM_PROG_INSTALL_STRIP
+# ---------------------
+# One issue with vendor 'install' (even GNU) is that you can't
+# specify the program used to strip binaries. This is especially
+# annoying in cross-compiling environments, where the build's strip
+# is unlikely to handle the host's binaries.
+# Fortunately install-sh will honor a STRIPPROG variable, so we
+# always use install-sh in "make install-strip", and initialize
+# STRIPPROG with the value of the STRIP variable (set by the user).
+AC_DEFUN([AM_PROG_INSTALL_STRIP],
+[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
+if test "$cross_compiling" != no; then
+ AC_CHECK_TOOL([STRIP], [strip], :)
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+AC_SUBST([INSTALL_STRIP_PROGRAM])])
+
+# Copyright (C) 2006-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_SUBST_NOTMAKE(VARIABLE)
+# ---------------------------
+# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
+# This macro is traced by Automake.
+AC_DEFUN([_AM_SUBST_NOTMAKE])
+
+# AM_SUBST_NOTMAKE(VARIABLE)
+# --------------------------
+# Public sister of _AM_SUBST_NOTMAKE.
+AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
+
+# Check how to create a tarball. -*- Autoconf -*-
+
+# Copyright (C) 2004-2018 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_TAR(FORMAT)
+# --------------------
+# Check how to create a tarball in format FORMAT.
+# FORMAT should be one of 'v7', 'ustar', or 'pax'.
+#
+# Substitute a variable $(am__tar) that is a command
+# writing to stdout a FORMAT-tarball containing the directory
+# $tardir.
+# tardir=directory && $(am__tar) > result.tar
+#
+# Substitute a variable $(am__untar) that extract such
+# a tarball read from stdin.
+# $(am__untar) < result.tar
+#
+AC_DEFUN([_AM_PROG_TAR],
+[# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AC_SUBST([AMTAR], ['$${TAR-tar}'])
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
+
+m4_if([$1], [v7],
+ [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
+
+ [m4_case([$1],
+ [ustar],
+ [# The POSIX 1988 'ustar' format is defined with fixed-size fields.
+ # There is notably a 21 bits limit for the UID and the GID. In fact,
+ # the 'pax' utility can hang on bigger UID/GID (see automake bug#8343
+ # and bug#13588).
+ am_max_uid=2097151 # 2^21 - 1
+ am_max_gid=$am_max_uid
+ # The $UID and $GID variables are not portable, so we need to resort
+ # to the POSIX-mandated id(1) utility. Errors in the 'id' calls
+ # below are definitely unexpected, so allow the users to see them
+ # (that is, avoid stderr redirection).
+ am_uid=`id -u || echo unknown`
+ am_gid=`id -g || echo unknown`
+ AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
+ if test $am_uid -le $am_max_uid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi
+ AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
+ if test $am_gid -le $am_max_gid; then
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ _am_tools=none
+ fi],
+
+ [pax],
+ [],
+
+ [m4_fatal([Unknown tar format])])
+
+ AC_MSG_CHECKING([how to create a $1 tar archive])
+
+ # Go ahead even if we have the value already cached. We do so because we
+ # need to set the values for the 'am__tar' and 'am__untar' variables.
+ _am_tools=${am_cv_prog_tar_$1-$_am_tools}
+
+ for _am_tool in $_am_tools; do
+ case $_am_tool in
+ gnutar)
+ for _am_tar in tar gnutar gtar; do
+ AM_RUN_LOG([$_am_tar --version]) && break
+ done
+ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
+ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
+ am__untar="$_am_tar -xf -"
+ ;;
+ plaintar)
+ # Must skip GNU tar: if it does not support --format= it doesn't create
+ # ustar tarball either.
+ (tar --version) >/dev/null 2>&1 && continue
+ am__tar='tar chf - "$$tardir"'
+ am__tar_='tar chf - "$tardir"'
+ am__untar='tar xf -'
+ ;;
+ pax)
+ am__tar='pax -L -x $1 -w "$$tardir"'
+ am__tar_='pax -L -x $1 -w "$tardir"'
+ am__untar='pax -r'
+ ;;
+ cpio)
+ am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
+ am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
+ am__untar='cpio -i -H $1 -d'
+ ;;
+ none)
+ am__tar=false
+ am__tar_=false
+ am__untar=false
+ ;;
+ esac
+
+ # If the value was cached, stop now. We just wanted to have am__tar
+ # and am__untar set.
+ test -n "${am_cv_prog_tar_$1}" && break
+
+ # tar/untar a dummy directory, and stop if the command works.
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ echo GrepMe > conftest.dir/file
+ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
+ rm -rf conftest.dir
+ if test -s conftest.tar; then
+ AM_RUN_LOG([$am__untar <conftest.tar])
+ AM_RUN_LOG([cat conftest.dir/file])
+ grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
+ fi
+ done
+ rm -rf conftest.dir
+
+ AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
+ AC_MSG_RESULT([$am_cv_prog_tar_$1])])
+
+AC_SUBST([am__tar])
+AC_SUBST([am__untar])
+]) # _AM_PROG_TAR
+
+m4_include([scripts/libtool.m4])
+m4_include([scripts/ltoptions.m4])
+m4_include([scripts/ltsugar.m4])
+m4_include([scripts/ltversion.m4])
+m4_include([scripts/lt~obsolete.m4])
diff --git a/autogen.sh b/autogen.sh
index 9160717..a46daf6 100755
--- a/autogen.sh
+++ b/autogen.sh
@@ -194,7 +194,7 @@
if test -d .git
then
exec >&2
- echo "ERROR: running autoreconf on an initialized sytem"
+ echo "ERROR: running autoreconf on an initialized system"
echo " This is not necessary; it is only necessary to remake the"
echo " autotools generated files if Makefile.am or configure.ac"
echo " change and make does the right thing with:"
diff --git a/compile b/compile
new file mode 100755
index 0000000..99e5052
--- /dev/null
+++ b/compile
@@ -0,0 +1,348 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" "" $nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+ file=$1
+ case $file in
+ / | /[!/]*) # absolute file, and not a UNC file
+ if test -z "$file_conv"; then
+ # lazily determine how to convert abs files
+ case `uname -s` in
+ MINGW*)
+ file_conv=mingw
+ ;;
+ CYGWIN*)
+ file_conv=cygwin
+ ;;
+ *)
+ file_conv=wine
+ ;;
+ esac
+ fi
+ case $file_conv/,$2, in
+ *,$file_conv,*)
+ ;;
+ mingw/*)
+ file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+ ;;
+ cygwin/*)
+ file=`cygpath -m "$file" || echo "$file"`
+ ;;
+ wine/*)
+ file=`winepath -w "$file" || echo "$file"`
+ ;;
+ esac
+ ;;
+ esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+ func_file_conv "$1"
+ if test -z "$lib_path"; then
+ lib_path=$file
+ else
+ lib_path="$lib_path;$file"
+ fi
+ linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+ lib=$1
+ found=no
+ save_IFS=$IFS
+ IFS=';'
+ for dir in $lib_path $LIB
+ do
+ IFS=$save_IFS
+ if $shared && test -f "$dir/$lib.dll.lib"; then
+ found=yes
+ lib=$dir/$lib.dll.lib
+ break
+ fi
+ if test -f "$dir/$lib.lib"; then
+ found=yes
+ lib=$dir/$lib.lib
+ break
+ fi
+ if test -f "$dir/lib$lib.a"; then
+ found=yes
+ lib=$dir/lib$lib.a
+ break
+ fi
+ done
+ IFS=$save_IFS
+
+ if test "$found" != yes; then
+ lib=$lib.lib
+ fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+ # Assume a capable shell
+ lib_path=
+ shared=:
+ linker_opts=
+ for arg
+ do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ eat=1
+ case $2 in
+ *.o | *.[oO][bB][jJ])
+ func_file_conv "$2"
+ set x "$@" -Fo"$file"
+ shift
+ ;;
+ *)
+ func_file_conv "$2"
+ set x "$@" -Fe"$file"
+ shift
+ ;;
+ esac
+ ;;
+ -I)
+ eat=1
+ func_file_conv "$2" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -I*)
+ func_file_conv "${1#-I}" mingw
+ set x "$@" -I"$file"
+ shift
+ ;;
+ -l)
+ eat=1
+ func_cl_dashl "$2"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -l*)
+ func_cl_dashl "${1#-l}"
+ set x "$@" "$lib"
+ shift
+ ;;
+ -L)
+ eat=1
+ func_cl_dashL "$2"
+ ;;
+ -L*)
+ func_cl_dashL "${1#-L}"
+ ;;
+ -static)
+ shared=false
+ ;;
+ -Wl,*)
+ arg=${1#-Wl,}
+ save_ifs="$IFS"; IFS=','
+ for flag in $arg; do
+ IFS="$save_ifs"
+ linker_opts="$linker_opts $flag"
+ done
+ IFS="$save_ifs"
+ ;;
+ -Xlinker)
+ eat=1
+ linker_opts="$linker_opts $2"
+ ;;
+ -*)
+ set x "$@" "$1"
+ shift
+ ;;
+ *.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+ func_file_conv "$1"
+ set x "$@" -Tp"$file"
+ shift
+ ;;
+ *.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+ func_file_conv "$1" mingw
+ set x "$@" "$file"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+ done
+ if test -n "$linker_opts"; then
+ linker_opts="-link$linker_opts"
+ fi
+ exec "$@" $linker_opts
+ exit 1
+}
+
+eat=
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "compile $scriptversion"
+ exit $?
+ ;;
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
+ func_cl_wrapper "$@" # Doesn't return...
+ ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+ if test -n "$eat"; then
+ eat=
+ else
+ case $1 in
+ -o)
+ # configure might choose to run compile as 'compile cc -o foo foo.c'.
+ # So we strip '-o arg' only if arg is an object.
+ eat=1
+ case $2 in
+ *.o | *.obj)
+ ofile=$2
+ ;;
+ *)
+ set x "$@" -o "$2"
+ shift
+ ;;
+ esac
+ ;;
+ *.c)
+ cfile=$1
+ set x "$@" "$1"
+ shift
+ ;;
+ *)
+ set x "$@" "$1"
+ shift
+ ;;
+ esac
+ fi
+ shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+ # If no '-o' option was seen then we might have been invoked from a
+ # pattern rule where we don't need one. That is ok -- this is a
+ # normal compilation that the losing compiler can handle. If no
+ # '.c' file was seen then we are probably linking. That is also
+ # ok.
+ exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file. Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+ if mkdir "$lockdir" >/dev/null 2>&1; then
+ break
+ fi
+ sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+ test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+ test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/config.guess b/config.guess
new file mode 100755
index 0000000..256083a
--- /dev/null
+++ b/config.guess
@@ -0,0 +1,1476 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright 1992-2018 Free Software Foundation, Inc.
+
+timestamp='2018-03-08'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+#
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
+#
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+#
+# Please send patches to <config-patches@gnu.org>.
+
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Options:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright 1992-2018 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > "$dummy.c" ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+case "$UNAME_SYSTEM" in
+Linux|GNU|GNU/*)
+ # If the system lacks a compiler, then just pick glibc.
+ # We could probably try harder.
+ LIBC=gnu
+
+ eval "$set_cc_for_build"
+ cat <<-EOF > "$dummy.c"
+ #include <features.h>
+ #if defined(__UCLIBC__)
+ LIBC=uclibc
+ #elif defined(__dietlibc__)
+ LIBC=dietlibc
+ #else
+ LIBC=gnu
+ #endif
+ EOF
+ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
+
+ # If ldd exists, use it to detect musl libc.
+ if command -v ldd >/dev/null && \
+ ldd --version 2>&1 | grep -q ^musl
+ then
+ LIBC=musl
+ fi
+ ;;
+esac
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+ "/sbin/$sysctl" 2>/dev/null || \
+ "/usr/sbin/$sysctl" 2>/dev/null || \
+ echo unknown)`
+ case "$UNAME_MACHINE_ARCH" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ earmv*)
+ arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+ endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
+ machine="${arch}${endian}"-unknown
+ ;;
+ *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently (or will in the future) and ABI.
+ case "$UNAME_MACHINE_ARCH" in
+ earm*)
+ os=netbsdelf
+ ;;
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval "$set_cc_for_build"
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # Determine ABI tags.
+ case "$UNAME_MACHINE_ARCH" in
+ earm*)
+ expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+ abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "$UNAME_VERSION" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "$machine-${os}${release}${abi}"
+ exit ;;
+ *:Bitrig:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
+ echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
+ exit ;;
+ *:OpenBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+ echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
+ exit ;;
+ *:LibertyBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+ echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
+ exit ;;
+ *:MidnightBSD:*:*)
+ echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
+ exit ;;
+ *:ekkoBSD:*:*)
+ echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
+ exit ;;
+ *:SolidBSD:*:*)
+ echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
+ exit ;;
+ macppc:MirBSD:*:*)
+ echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
+ exit ;;
+ *:MirBSD:*:*)
+ echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
+ exit ;;
+ *:Sortix:*:*)
+ echo "$UNAME_MACHINE"-unknown-sortix
+ exit ;;
+ *:Redox:*:*)
+ echo "$UNAME_MACHINE"-unknown-redox
+ exit ;;
+ mips:OSF1:*.*)
+ echo mips-dec-osf1
+ exit ;;
+ alpha:OSF1:*:*)
+ case $UNAME_RELEASE in
+ *4.0)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+ ;;
+ *5.*)
+ UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+ ;;
+ esac
+ # According to Compaq, /usr/sbin/psrinfo has been available on
+ # OSF/1 and Tru64 systems produced since 1995. I hope that
+ # covers most systems running today. This code pipes the CPU
+ # types through head -n 1, so we only detect the type of CPU 0.
+ ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+ case "$ALPHA_CPU_TYPE" in
+ "EV4 (21064)")
+ UNAME_MACHINE=alpha ;;
+ "EV4.5 (21064)")
+ UNAME_MACHINE=alpha ;;
+ "LCA4 (21066/21068)")
+ UNAME_MACHINE=alpha ;;
+ "EV5 (21164)")
+ UNAME_MACHINE=alphaev5 ;;
+ "EV5.6 (21164A)")
+ UNAME_MACHINE=alphaev56 ;;
+ "EV5.6 (21164PC)")
+ UNAME_MACHINE=alphapca56 ;;
+ "EV5.7 (21164PC)")
+ UNAME_MACHINE=alphapca57 ;;
+ "EV6 (21264)")
+ UNAME_MACHINE=alphaev6 ;;
+ "EV6.7 (21264A)")
+ UNAME_MACHINE=alphaev67 ;;
+ "EV6.8CB (21264C)")
+ UNAME_MACHINE=alphaev68 ;;
+ "EV6.8AL (21264B)")
+ UNAME_MACHINE=alphaev68 ;;
+ "EV6.8CX (21264D)")
+ UNAME_MACHINE=alphaev68 ;;
+ "EV6.9A (21264/EV69A)")
+ UNAME_MACHINE=alphaev69 ;;
+ "EV7 (21364)")
+ UNAME_MACHINE=alphaev7 ;;
+ "EV7.9 (21364A)")
+ UNAME_MACHINE=alphaev79 ;;
+ esac
+ # A Pn.n version is a patched version.
+ # A Vn.n version is a released version.
+ # A Tn.n version is a released field test version.
+ # A Xn.n version is an unreleased experimental baselevel.
+ # 1.2 uses "1.2" for uname -r.
+ echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
+ # Reset EXIT trap before exiting to avoid spurious non-zero exit code.
+ exitcode=$?
+ trap '' 0
+ exit $exitcode ;;
+ Amiga*:UNIX_System_V:4.0:*)
+ echo m68k-unknown-sysv4
+ exit ;;
+ *:[Aa]miga[Oo][Ss]:*:*)
+ echo "$UNAME_MACHINE"-unknown-amigaos
+ exit ;;
+ *:[Mm]orph[Oo][Ss]:*:*)
+ echo "$UNAME_MACHINE"-unknown-morphos
+ exit ;;
+ *:OS/390:*:*)
+ echo i370-ibm-openedition
+ exit ;;
+ *:z/VM:*:*)
+ echo s390-ibm-zvmoe
+ exit ;;
+ *:OS400:*:*)
+ echo powerpc-ibm-os400
+ exit ;;
+ arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+ echo arm-acorn-riscix"$UNAME_RELEASE"
+ exit ;;
+ arm*:riscos:*:*|arm*:RISCOS:*:*)
+ echo arm-unknown-riscos
+ exit ;;
+ SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+ echo hppa1.1-hitachi-hiuxmpp
+ exit ;;
+ Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+ # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+ if test "`(/bin/universe) 2>/dev/null`" = att ; then
+ echo pyramid-pyramid-sysv3
+ else
+ echo pyramid-pyramid-bsd
+ fi
+ exit ;;
+ NILE*:*:*:dcosx)
+ echo pyramid-pyramid-svr4
+ exit ;;
+ DRS?6000:unix:4.0:6*)
+ echo sparc-icl-nx6
+ exit ;;
+ DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+ case `/usr/bin/uname -p` in
+ sparc) echo sparc-icl-nx7; exit ;;
+ esac ;;
+ s390x:SunOS:*:*)
+ echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
+ exit ;;
+ sun4H:SunOS:5.*:*)
+ echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+ exit ;;
+ sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+ echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
+ exit ;;
+ i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
+ echo i386-pc-auroraux"$UNAME_RELEASE"
+ exit ;;
+ i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
+ eval "$set_cc_for_build"
+ SUN_ARCH=i386
+ # If there is a compiler, see if it is configured for 64-bit objects.
+ # Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
+ # This test works for both compilers.
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ SUN_ARCH=x86_64
+ fi
+ fi
+ echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+ exit ;;
+ sun4*:SunOS:6*:*)
+ # According to config.sub, this is the proper way to canonicalize
+ # SunOS6. Hard to guess exactly what SunOS6 will be like, but
+ # it's likely to be more like Solaris than SunOS4.
+ echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+ exit ;;
+ sun4*:SunOS:*:*)
+ case "`/usr/bin/arch -k`" in
+ Series*|S4*)
+ UNAME_RELEASE=`uname -v`
+ ;;
+ esac
+ # Japanese Language versions have a version number like `4.1.3-JL'.
+ echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
+ exit ;;
+ sun3*:SunOS:*:*)
+ echo m68k-sun-sunos"$UNAME_RELEASE"
+ exit ;;
+ sun*:*:4.2BSD:*)
+ UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+ test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
+ case "`/bin/arch`" in
+ sun3)
+ echo m68k-sun-sunos"$UNAME_RELEASE"
+ ;;
+ sun4)
+ echo sparc-sun-sunos"$UNAME_RELEASE"
+ ;;
+ esac
+ exit ;;
+ aushp:SunOS:*:*)
+ echo sparc-auspex-sunos"$UNAME_RELEASE"
+ exit ;;
+ # The situation for MiNT is a little confusing. The machine name
+ # can be virtually everything (everything which is not
+ # "atarist" or "atariste" at least should have a processor
+ # > m68000). The system name ranges from "MiNT" over "FreeMiNT"
+ # to the lowercase version "mint" (or "freemint"). Finally
+ # the system name "TOS" denotes a system which is actually not
+ # MiNT. But MiNT is downward compatible to TOS, so this should
+ # be no problem.
+ atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint"$UNAME_RELEASE"
+ exit ;;
+ atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+ echo m68k-atari-mint"$UNAME_RELEASE"
+ exit ;;
+ *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+ echo m68k-atari-mint"$UNAME_RELEASE"
+ exit ;;
+ milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+ echo m68k-milan-mint"$UNAME_RELEASE"
+ exit ;;
+ hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+ echo m68k-hades-mint"$UNAME_RELEASE"
+ exit ;;
+ *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+ echo m68k-unknown-mint"$UNAME_RELEASE"
+ exit ;;
+ m68k:machten:*:*)
+ echo m68k-apple-machten"$UNAME_RELEASE"
+ exit ;;
+ powerpc:machten:*:*)
+ echo powerpc-apple-machten"$UNAME_RELEASE"
+ exit ;;
+ RISC*:Mach:*:*)
+ echo mips-dec-mach_bsd4.3
+ exit ;;
+ RISC*:ULTRIX:*:*)
+ echo mips-dec-ultrix"$UNAME_RELEASE"
+ exit ;;
+ VAX*:ULTRIX*:*:*)
+ echo vax-dec-ultrix"$UNAME_RELEASE"
+ exit ;;
+ 2020:CLIX:*:* | 2430:CLIX:*:*)
+ echo clipper-intergraph-clix"$UNAME_RELEASE"
+ exit ;;
+ mips:*:*:UMIPS | mips:*:*:RISCos)
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
+#ifdef __cplusplus
+#include <stdio.h> /* for printf() prototype */
+ int main (int argc, char *argv[]) {
+#else
+ int main (argc, argv) int argc; char *argv[]; {
+#endif
+ #if defined (host_mips) && defined (MIPSEB)
+ #if defined (SYSTYPE_SYSV)
+ printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_SVR4)
+ printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
+ #endif
+ #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+ printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
+ #endif
+ #endif
+ exit (-1);
+ }
+EOF
+ $CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
+ dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo mips-mips-riscos"$UNAME_RELEASE"
+ exit ;;
+ Motorola:PowerMAX_OS:*:*)
+ echo powerpc-motorola-powermax
+ exit ;;
+ Motorola:*:4.3:PL8-*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+ echo powerpc-harris-powermax
+ exit ;;
+ Night_Hawk:Power_UNIX:*:*)
+ echo powerpc-harris-powerunix
+ exit ;;
+ m88k:CX/UX:7*:*)
+ echo m88k-harris-cxux7
+ exit ;;
+ m88k:*:4*:R4*)
+ echo m88k-motorola-sysv4
+ exit ;;
+ m88k:*:3*:R3*)
+ echo m88k-motorola-sysv3
+ exit ;;
+ AViiON:dgux:*:*)
+ # DG/UX returns AViiON for all architectures
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ]
+ then
+ if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \
+ [ "$TARGET_BINARY_INTERFACE"x = x ]
+ then
+ echo m88k-dg-dgux"$UNAME_RELEASE"
+ else
+ echo m88k-dg-dguxbcs"$UNAME_RELEASE"
+ fi
+ else
+ echo i586-dg-dgux"$UNAME_RELEASE"
+ fi
+ exit ;;
+ M88*:DolphinOS:*:*) # DolphinOS (SVR3)
+ echo m88k-dolphin-sysv3
+ exit ;;
+ M88*:*:R3*:*)
+ # Delta 88k system running SVR3
+ echo m88k-motorola-sysv3
+ exit ;;
+ XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+ echo m88k-tektronix-sysv3
+ exit ;;
+ Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+ echo m68k-tektronix-bsd
+ exit ;;
+ *:IRIX*:*:*)
+ echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
+ exit ;;
+ ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+ echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
+ exit ;; # Note that: echo "'`uname -s`'" gives 'AIX '
+ i*86:AIX:*:*)
+ echo i386-ibm-aix
+ exit ;;
+ ia64:AIX:*:*)
+ if [ -x /usr/bin/oslevel ] ; then
+ IBM_REV=`/usr/bin/oslevel`
+ else
+ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+ fi
+ echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
+ exit ;;
+ *:AIX:2:3)
+ if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
+ #include <sys/systemcfg.h>
+
+ main()
+ {
+ if (!__power_pc())
+ exit(1);
+ puts("powerpc-ibm-aix3.2.5");
+ exit(0);
+ }
+EOF
+ if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
+ then
+ echo "$SYSTEM_NAME"
+ else
+ echo rs6000-ibm-aix3.2.5
+ fi
+ elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+ echo rs6000-ibm-aix3.2.4
+ else
+ echo rs6000-ibm-aix3.2
+ fi
+ exit ;;
+ *:AIX:*:[4567])
+ IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+ if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
+ IBM_ARCH=rs6000
+ else
+ IBM_ARCH=powerpc
+ fi
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
+ else
+ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
+ fi
+ echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
+ exit ;;
+ *:AIX:*:*)
+ echo rs6000-ibm-aix
+ exit ;;
+ ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
+ echo romp-ibm-bsd4.4
+ exit ;;
+ ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
+ echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to
+ exit ;; # report: romp-ibm BSD 4.3
+ *:BOSX:*:*)
+ echo rs6000-bull-bosx
+ exit ;;
+ DPX/2?00:B.O.S.:*:*)
+ echo m68k-bull-sysv3
+ exit ;;
+ 9000/[34]??:4.3bsd:1.*:*)
+ echo m68k-hp-bsd
+ exit ;;
+ hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+ echo m68k-hp-bsd4.4
+ exit ;;
+ 9000/[34678]??:HP-UX:*:*)
+ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+ case "$UNAME_MACHINE" in
+ 9000/31?) HP_ARCH=m68000 ;;
+ 9000/[34]??) HP_ARCH=m68k ;;
+ 9000/[678][0-9][0-9])
+ if [ -x /usr/bin/getconf ]; then
+ sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+ sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+ case "$sc_cpu_version" in
+ 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
+ 532) # CPU_PA_RISC2_0
+ case "$sc_kernel_bits" in
+ 32) HP_ARCH=hppa2.0n ;;
+ 64) HP_ARCH=hppa2.0w ;;
+ '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
+ esac ;;
+ esac
+ fi
+ if [ "$HP_ARCH" = "" ]; then
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
+
+ #define _HPUX_SOURCE
+ #include <stdlib.h>
+ #include <unistd.h>
+
+ int main ()
+ {
+ #if defined(_SC_KERNEL_BITS)
+ long bits = sysconf(_SC_KERNEL_BITS);
+ #endif
+ long cpu = sysconf (_SC_CPU_VERSION);
+
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+ case CPU_PA_RISC2_0:
+ #if defined(_SC_KERNEL_BITS)
+ switch (bits)
+ {
+ case 64: puts ("hppa2.0w"); break;
+ case 32: puts ("hppa2.0n"); break;
+ default: puts ("hppa2.0"); break;
+ } break;
+ #else /* !defined(_SC_KERNEL_BITS) */
+ puts ("hppa2.0"); break;
+ #endif
+ default: puts ("hppa1.0"); break;
+ }
+ exit (0);
+ }
+EOF
+ (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
+ test -z "$HP_ARCH" && HP_ARCH=hppa
+ fi ;;
+ esac
+ if [ "$HP_ARCH" = hppa2.0w ]
+ then
+ eval "$set_cc_for_build"
+
+ # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+ # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
+ # generating 64-bit code. GNU and HP use different nomenclature:
+ #
+ # $ CC_FOR_BUILD=cc ./config.guess
+ # => hppa2.0w-hp-hpux11.23
+ # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+ # => hppa64-hp-hpux11.23
+
+ if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
+ grep -q __LP64__
+ then
+ HP_ARCH=hppa2.0w
+ else
+ HP_ARCH=hppa64
+ fi
+ fi
+ echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
+ exit ;;
+ ia64:HP-UX:*:*)
+ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux"$HPUX_REV"
+ exit ;;
+ 3050*:HI-UX:*:*)
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
+ #include <unistd.h>
+ int
+ main ()
+ {
+ long cpu = sysconf (_SC_CPU_VERSION);
+ /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+ true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
+ results, however. */
+ if (CPU_IS_PA_RISC (cpu))
+ {
+ switch (cpu)
+ {
+ case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+ case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+ default: puts ("hppa-hitachi-hiuxwe2"); break;
+ }
+ }
+ else if (CPU_IS_HP_MC68K (cpu))
+ puts ("m68k-hitachi-hiuxwe2");
+ else puts ("unknown-hitachi-hiuxwe2");
+ exit (0);
+ }
+EOF
+ $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
+ { echo "$SYSTEM_NAME"; exit; }
+ echo unknown-hitachi-hiuxwe2
+ exit ;;
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
+ echo hppa1.1-hp-bsd
+ exit ;;
+ 9000/8??:4.3bsd:*:*)
+ echo hppa1.0-hp-bsd
+ exit ;;
+ *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+ echo hppa1.0-hp-mpeix
+ exit ;;
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
+ echo hppa1.1-hp-osf
+ exit ;;
+ hp8??:OSF1:*:*)
+ echo hppa1.0-hp-osf
+ exit ;;
+ i*86:OSF1:*:*)
+ if [ -x /usr/sbin/sysversion ] ; then
+ echo "$UNAME_MACHINE"-unknown-osf1mk
+ else
+ echo "$UNAME_MACHINE"-unknown-osf1
+ fi
+ exit ;;
+ parisc*:Lites*:*:*)
+ echo hppa1.1-hp-lites
+ exit ;;
+ C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+ echo c1-convex-bsd
+ exit ;;
+ C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+ if getsysinfo -f scalar_acc
+ then echo c32-convex-bsd
+ else echo c2-convex-bsd
+ fi
+ exit ;;
+ C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+ echo c34-convex-bsd
+ exit ;;
+ C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+ echo c38-convex-bsd
+ exit ;;
+ C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+ echo c4-convex-bsd
+ exit ;;
+ CRAY*Y-MP:*:*:*)
+ echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*[A-Z]90:*:*:*)
+ echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
+ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+ -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+ -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*TS:*:*:*)
+ echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*T3E:*:*:*)
+ echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ CRAY*SV1:*:*:*)
+ echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ *:UNICOS/mp:*:*)
+ echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
+ exit ;;
+ F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+ FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
+ echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ 5000:UNIX_System_V:4.*:*)
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
+ echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+ exit ;;
+ i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+ echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
+ exit ;;
+ sparc*:BSD/OS:*:*)
+ echo sparc-unknown-bsdi"$UNAME_RELEASE"
+ exit ;;
+ *:BSD/OS:*:*)
+ echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
+ exit ;;
+ *:FreeBSD:*:*)
+ UNAME_PROCESSOR=`/usr/bin/uname -p`
+ case "$UNAME_PROCESSOR" in
+ amd64)
+ UNAME_PROCESSOR=x86_64 ;;
+ i386)
+ UNAME_PROCESSOR=i586 ;;
+ esac
+ echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
+ exit ;;
+ i*:CYGWIN*:*)
+ echo "$UNAME_MACHINE"-pc-cygwin
+ exit ;;
+ *:MINGW64*:*)
+ echo "$UNAME_MACHINE"-pc-mingw64
+ exit ;;
+ *:MINGW*:*)
+ echo "$UNAME_MACHINE"-pc-mingw32
+ exit ;;
+ *:MSYS*:*)
+ echo "$UNAME_MACHINE"-pc-msys
+ exit ;;
+ i*:PW*:*)
+ echo "$UNAME_MACHINE"-pc-pw32
+ exit ;;
+ *:Interix*:*)
+ case "$UNAME_MACHINE" in
+ x86)
+ echo i586-pc-interix"$UNAME_RELEASE"
+ exit ;;
+ authenticamd | genuineintel | EM64T)
+ echo x86_64-unknown-interix"$UNAME_RELEASE"
+ exit ;;
+ IA64)
+ echo ia64-unknown-interix"$UNAME_RELEASE"
+ exit ;;
+ esac ;;
+ i*:UWIN*:*)
+ echo "$UNAME_MACHINE"-pc-uwin
+ exit ;;
+ amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
+ echo x86_64-unknown-cygwin
+ exit ;;
+ prep*:SunOS:5.*:*)
+ echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
+ exit ;;
+ *:GNU:*:*)
+ # the GNU system
+ echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
+ exit ;;
+ *:GNU/*:*:*)
+ # other systems with GNU libc and userland
+ echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
+ exit ;;
+ i*86:Minix:*:*)
+ echo "$UNAME_MACHINE"-pc-minix
+ exit ;;
+ aarch64:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ aarch64_be:Linux:*:*)
+ UNAME_MACHINE=aarch64_be
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ alpha:Linux:*:*)
+ case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+ EV5) UNAME_MACHINE=alphaev5 ;;
+ EV56) UNAME_MACHINE=alphaev56 ;;
+ PCA56) UNAME_MACHINE=alphapca56 ;;
+ PCA57) UNAME_MACHINE=alphapca56 ;;
+ EV6) UNAME_MACHINE=alphaev6 ;;
+ EV67) UNAME_MACHINE=alphaev67 ;;
+ EV68*) UNAME_MACHINE=alphaev68 ;;
+ esac
+ objdump --private-headers /bin/sh | grep -q ld.so.1
+ if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ arc:Linux:*:* | arceb:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ arm*:Linux:*:*)
+ eval "$set_cc_for_build"
+ if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_EABI__
+ then
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ else
+ if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ARM_PCS_VFP
+ then
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
+ else
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
+ fi
+ fi
+ exit ;;
+ avr32*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ cris:Linux:*:*)
+ echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+ exit ;;
+ crisv32:Linux:*:*)
+ echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+ exit ;;
+ e2k:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ frv:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ hexagon:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ i*86:Linux:*:*)
+ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
+ exit ;;
+ ia64:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ k1om:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ m32r*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ m68*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ mips:Linux:*:* | mips64:Linux:*:*)
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
+ #undef CPU
+ #undef ${UNAME_MACHINE}
+ #undef ${UNAME_MACHINE}el
+ #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+ CPU=${UNAME_MACHINE}el
+ #else
+ #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+ CPU=${UNAME_MACHINE}
+ #else
+ CPU=
+ #endif
+ #endif
+EOF
+ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`"
+ test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; }
+ ;;
+ mips64el:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-"$LIBC"
+ exit ;;
+ or32:Linux:*:* | or1k*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ padre:Linux:*:*)
+ echo sparc-unknown-linux-"$LIBC"
+ exit ;;
+ parisc64:Linux:*:* | hppa64:Linux:*:*)
+ echo hppa64-unknown-linux-"$LIBC"
+ exit ;;
+ parisc:Linux:*:* | hppa:Linux:*:*)
+ # Look for CPU level
+ case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+ PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
+ PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
+ *) echo hppa-unknown-linux-"$LIBC" ;;
+ esac
+ exit ;;
+ ppc64:Linux:*:*)
+ echo powerpc64-unknown-linux-"$LIBC"
+ exit ;;
+ ppc:Linux:*:*)
+ echo powerpc-unknown-linux-"$LIBC"
+ exit ;;
+ ppc64le:Linux:*:*)
+ echo powerpc64le-unknown-linux-"$LIBC"
+ exit ;;
+ ppcle:Linux:*:*)
+ echo powerpcle-unknown-linux-"$LIBC"
+ exit ;;
+ riscv32:Linux:*:* | riscv64:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ s390:Linux:*:* | s390x:Linux:*:*)
+ echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
+ exit ;;
+ sh64*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ sh*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ sparc:Linux:*:* | sparc64:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ tile*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ vax:Linux:*:*)
+ echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
+ exit ;;
+ x86_64:Linux:*:*)
+ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
+ exit ;;
+ xtensa*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ i*86:DYNIX/ptx:4*:*)
+ # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+ # earlier versions are messed up and put the nodename in both
+ # sysname and nodename.
+ echo i386-sequent-sysv4
+ exit ;;
+ i*86:UNIX_SV:4.2MP:2.*)
+ # Unixware is an offshoot of SVR4, but it has its own version
+ # number series starting with 2...
+ # I am not positive that other SVR4 systems won't match this,
+ # I just have to hope. -- rms.
+ # Use sysv4.2uw... so that sysv4* matches it.
+ echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
+ exit ;;
+ i*86:OS/2:*:*)
+ # If we were able to find `uname', then EMX Unix compatibility
+ # is probably installed.
+ echo "$UNAME_MACHINE"-pc-os2-emx
+ exit ;;
+ i*86:XTS-300:*:STOP)
+ echo "$UNAME_MACHINE"-unknown-stop
+ exit ;;
+ i*86:atheos:*:*)
+ echo "$UNAME_MACHINE"-unknown-atheos
+ exit ;;
+ i*86:syllable:*:*)
+ echo "$UNAME_MACHINE"-pc-syllable
+ exit ;;
+ i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
+ echo i386-unknown-lynxos"$UNAME_RELEASE"
+ exit ;;
+ i*86:*DOS:*:*)
+ echo "$UNAME_MACHINE"-pc-msdosdjgpp
+ exit ;;
+ i*86:*:4.*:*)
+ UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
+ if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+ echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
+ else
+ echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
+ fi
+ exit ;;
+ i*86:*:5:[678]*)
+ # UnixWare 7.x, OpenUNIX and OpenServer 6.
+ case `/bin/uname -X | grep "^Machine"` in
+ *486*) UNAME_MACHINE=i486 ;;
+ *Pentium) UNAME_MACHINE=i586 ;;
+ *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+ esac
+ echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}"
+ exit ;;
+ i*86:*:3.2:*)
+ if test -f /usr/options/cb.name; then
+ UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+ echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
+ elif /bin/uname -X 2>/dev/null >/dev/null ; then
+ UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+ (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+ (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+ && UNAME_MACHINE=i586
+ (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+ && UNAME_MACHINE=i686
+ (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+ && UNAME_MACHINE=i686
+ echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
+ else
+ echo "$UNAME_MACHINE"-pc-sysv32
+ fi
+ exit ;;
+ pc:*:*:*)
+ # Left here for compatibility:
+ # uname -m prints for DJGPP always 'pc', but it prints nothing about
+ # the processor, so we play safe by assuming i586.
+ # Note: whatever this is, it MUST be the same as what config.sub
+ # prints for the "djgpp" host, or else GDB configure will decide that
+ # this is a cross-build.
+ echo i586-pc-msdosdjgpp
+ exit ;;
+ Intel:Mach:3*:*)
+ echo i386-pc-mach3
+ exit ;;
+ paragon:*:*:*)
+ echo i860-intel-osf1
+ exit ;;
+ i860:*:4.*:*) # i860-SVR4
+ if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+ echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
+ else # Add other i860-SVR4 vendors below as they are discovered.
+ echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4
+ fi
+ exit ;;
+ mini*:CTIX:SYS*5:*)
+ # "miniframe"
+ echo m68010-convergent-sysv
+ exit ;;
+ mc68k:UNIX:SYSTEM5:3.51m)
+ echo m68k-convergent-sysv
+ exit ;;
+ M680?0:D-NIX:5.3:*)
+ echo m68k-diab-dnix
+ exit ;;
+ M68*:*:R3V[5678]*:*)
+ test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+ 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+ OS_REL=''
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+ 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4; exit; } ;;
+ NCR*:*:4.2:* | MPRAS*:*:4.2:*)
+ OS_REL='.3'
+ test -r /etc/.relid \
+ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+ /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
+ /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
+ m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+ echo m68k-unknown-lynxos"$UNAME_RELEASE"
+ exit ;;
+ mc68030:UNIX_System_V:4.*:*)
+ echo m68k-atari-sysv4
+ exit ;;
+ TSUNAMI:LynxOS:2.*:*)
+ echo sparc-unknown-lynxos"$UNAME_RELEASE"
+ exit ;;
+ rs6000:LynxOS:2.*:*)
+ echo rs6000-unknown-lynxos"$UNAME_RELEASE"
+ exit ;;
+ PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
+ echo powerpc-unknown-lynxos"$UNAME_RELEASE"
+ exit ;;
+ SM[BE]S:UNIX_SV:*:*)
+ echo mips-dde-sysv"$UNAME_RELEASE"
+ exit ;;
+ RM*:ReliantUNIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ RM*:SINIX-*:*:*)
+ echo mips-sni-sysv4
+ exit ;;
+ *:SINIX-*:*:*)
+ if uname -p 2>/dev/null >/dev/null ; then
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ echo "$UNAME_MACHINE"-sni-sysv4
+ else
+ echo ns32k-sni-sysv
+ fi
+ exit ;;
+ PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+ # says <Richard.M.Bartel@ccMail.Census.GOV>
+ echo i586-unisys-sysv4
+ exit ;;
+ *:UNIX_System_V:4*:FTX*)
+ # From Gerald Hewes <hewes@openmarket.com>.
+ # How about differentiating between stratus architectures? -djm
+ echo hppa1.1-stratus-sysv4
+ exit ;;
+ *:*:*:FTX*)
+ # From seanf@swdc.stratus.com.
+ echo i860-stratus-sysv4
+ exit ;;
+ i*86:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo "$UNAME_MACHINE"-stratus-vos
+ exit ;;
+ *:VOS:*:*)
+ # From Paul.Green@stratus.com.
+ echo hppa1.1-stratus-vos
+ exit ;;
+ mc68*:A/UX:*:*)
+ echo m68k-apple-aux"$UNAME_RELEASE"
+ exit ;;
+ news*:NEWS-OS:6*:*)
+ echo mips-sony-newsos6
+ exit ;;
+ R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+ if [ -d /usr/nec ]; then
+ echo mips-nec-sysv"$UNAME_RELEASE"
+ else
+ echo mips-unknown-sysv"$UNAME_RELEASE"
+ fi
+ exit ;;
+ BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
+ echo powerpc-be-beos
+ exit ;;
+ BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
+ echo powerpc-apple-beos
+ exit ;;
+ BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
+ echo i586-pc-beos
+ exit ;;
+ BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
+ echo i586-pc-haiku
+ exit ;;
+ x86_64:Haiku:*:*)
+ echo x86_64-unknown-haiku
+ exit ;;
+ SX-4:SUPER-UX:*:*)
+ echo sx4-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ SX-5:SUPER-UX:*:*)
+ echo sx5-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ SX-6:SUPER-UX:*:*)
+ echo sx6-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ SX-7:SUPER-UX:*:*)
+ echo sx7-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ SX-8:SUPER-UX:*:*)
+ echo sx8-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ SX-8R:SUPER-UX:*:*)
+ echo sx8r-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ SX-ACE:SUPER-UX:*:*)
+ echo sxace-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ Power*:Rhapsody:*:*)
+ echo powerpc-apple-rhapsody"$UNAME_RELEASE"
+ exit ;;
+ *:Rhapsody:*:*)
+ echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
+ exit ;;
+ *:Darwin:*:*)
+ UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+ eval "$set_cc_for_build"
+ if test "$UNAME_PROCESSOR" = unknown ; then
+ UNAME_PROCESSOR=powerpc
+ fi
+ if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
+ # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+ if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_PPC >/dev/null
+ then
+ UNAME_PROCESSOR=powerpc
+ fi
+ fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
+ fi
+ echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
+ exit ;;
+ *:procnto*:*:* | *:QNX:[0123456789]*:*)
+ UNAME_PROCESSOR=`uname -p`
+ if test "$UNAME_PROCESSOR" = x86; then
+ UNAME_PROCESSOR=i386
+ UNAME_MACHINE=pc
+ fi
+ echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
+ exit ;;
+ *:QNX:*:4*)
+ echo i386-pc-qnx
+ exit ;;
+ NEO-*:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ NSE-*:NONSTOP_KERNEL:*:*)
+ echo nse-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ NSR-*:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ NSV-*:NONSTOP_KERNEL:*:*)
+ echo nsv-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ NSX-*:NONSTOP_KERNEL:*:*)
+ echo nsx-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ *:NonStop-UX:*:*)
+ echo mips-compaq-nonstopux
+ exit ;;
+ BS2000:POSIX*:*:*)
+ echo bs2000-siemens-sysv
+ exit ;;
+ DS/*:UNIX_System_V:*:*)
+ echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
+ exit ;;
+ *:Plan9:*:*)
+ # "uname -m" is not consistent, so use $cputype instead. 386
+ # is converted to i386 for consistency with other x86
+ # operating systems.
+ if test "$cputype" = 386; then
+ UNAME_MACHINE=i386
+ else
+ UNAME_MACHINE="$cputype"
+ fi
+ echo "$UNAME_MACHINE"-unknown-plan9
+ exit ;;
+ *:TOPS-10:*:*)
+ echo pdp10-unknown-tops10
+ exit ;;
+ *:TENEX:*:*)
+ echo pdp10-unknown-tenex
+ exit ;;
+ KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+ echo pdp10-dec-tops20
+ exit ;;
+ XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+ echo pdp10-xkl-tops20
+ exit ;;
+ *:TOPS-20:*:*)
+ echo pdp10-unknown-tops20
+ exit ;;
+ *:ITS:*:*)
+ echo pdp10-unknown-its
+ exit ;;
+ SEI:*:*:SEIUX)
+ echo mips-sei-seiux"$UNAME_RELEASE"
+ exit ;;
+ *:DragonFly:*:*)
+ echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
+ exit ;;
+ *:*VMS:*:*)
+ UNAME_MACHINE=`(uname -p) 2>/dev/null`
+ case "$UNAME_MACHINE" in
+ A*) echo alpha-dec-vms ; exit ;;
+ I*) echo ia64-dec-vms ; exit ;;
+ V*) echo vax-dec-vms ; exit ;;
+ esac ;;
+ *:XENIX:*:SysV)
+ echo i386-pc-xenix
+ exit ;;
+ i*86:skyos:*:*)
+ echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
+ exit ;;
+ i*86:rdos:*:*)
+ echo "$UNAME_MACHINE"-pc-rdos
+ exit ;;
+ i*86:AROS:*:*)
+ echo "$UNAME_MACHINE"-pc-aros
+ exit ;;
+ x86_64:VMkernel:*:*)
+ echo "$UNAME_MACHINE"-unknown-esx
+ exit ;;
+ amd64:Isilon\ OneFS:*:*)
+ echo x86_64-unknown-onefs
+ exit ;;
+esac
+
+echo "$0: unable to guess system type" >&2
+
+case "$UNAME_MACHINE:$UNAME_SYSTEM" in
+ mips:Linux | mips64:Linux)
+ # If we got here on MIPS GNU/Linux, output extra information.
+ cat >&2 <<EOF
+
+NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
+the system type. Please install a C compiler and try again.
+EOF
+ ;;
+esac
+
+cat >&2 <<EOF
+
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite *all*
+copies of config.guess and config.sub with the latest versions from:
+
+ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
+and
+ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo = `(hostinfo) 2>/dev/null`
+/bin/universe = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = "$UNAME_MACHINE"
+UNAME_RELEASE = "$UNAME_RELEASE"
+UNAME_SYSTEM = "$UNAME_SYSTEM"
+UNAME_VERSION = "$UNAME_VERSION"
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/config.h.in b/config.h.in
new file mode 100644
index 0000000..a0ec9bc
--- /dev/null
+++ b/config.h.in
@@ -0,0 +1,129 @@
+/* config.h.in. Generated from configure.ac by autoheader. */
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the `feenableexcept' function. */
+#undef HAVE_FEENABLEEXCEPT
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the `m' library (-lm). */
+#undef HAVE_LIBM
+
+/* Define to 1 if you have the `z' library (-lz). */
+#undef HAVE_LIBZ
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define to 1 if you have the `memset' function. */
+#undef HAVE_MEMSET
+
+/* Define to 1 if you have the `pow' function. */
+#undef HAVE_POW
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#undef LT_OBJDIR
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* Turn on ARM Neon optimizations at run-time */
+#undef PNG_ARM_NEON_API_SUPPORTED
+
+/* Check for ARM Neon support at run-time */
+#undef PNG_ARM_NEON_CHECK_SUPPORTED
+
+/* Enable ARM Neon optimizations */
+#undef PNG_ARM_NEON_OPT
+
+/* Enable Intel SSE optimizations */
+#undef PNG_INTEL_SSE_OPT
+
+/* Turn on MIPS MSA optimizations at run-time */
+#undef PNG_MIPS_MSA_API_SUPPORTED
+
+/* Check for MIPS MSA support at run-time */
+#undef PNG_MIPS_MSA_CHECK_SUPPORTED
+
+/* Enable MIPS MSA optimizations */
+#undef PNG_MIPS_MSA_OPT
+
+/* Turn on POWERPC VSX optimizations at run-time */
+#undef PNG_POWERPC_VSX_API_SUPPORTED
+
+/* Check for POWERPC VSX support at run-time */
+#undef PNG_POWERPC_VSX_CHECK_SUPPORTED
+
+/* Enable POWERPC VSX optimizations */
+#undef PNG_POWERPC_VSX_OPT
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to 1 if your <sys/time.h> declares `struct tm'. */
+#undef TM_IN_SYS_TIME
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to the equivalent of the C99 'restrict' keyword, or to
+ nothing if this is not supported. Do not define if restrict is
+ supported directly. */
+#undef restrict
+/* Work around a bug in Sun C++: it does not support _Restrict or
+ __restrict__, even though the corresponding Sun C compiler ends up with
+ "#define restrict _Restrict" or "#define restrict __restrict__" in the
+ previous line. Perhaps some future version of Sun C++ will work with
+ restrict; if so, hopefully it defines __RESTRICT like Sun C does. */
+#if defined __SUNPRO_CC && !defined __RESTRICT
+# define _Restrict
+# define __restrict__
+#endif
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
diff --git a/config.sub b/config.sub
new file mode 100755
index 0000000..9ccf09a
--- /dev/null
+++ b/config.sub
@@ -0,0 +1,1801 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright 1992-2018 Free Software Foundation, Inc.
+
+timestamp='2018-03-08'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that
+# program. This Exception is an additional permission under section 7
+# of the GNU General Public License, version 3 ("GPLv3").
+
+
+# Please send patches to <config-patches@gnu.org>.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
+
+Canonicalize a configuration name.
+
+Options:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright 1992-2018 Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo "$1"
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
+ kopensolaris*-gnu* | cloudabi*-eabi* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
+ *)
+ basic_machine=`echo "$1" | sed 's/-[^-]*$//'`
+ if [ "$basic_machine" != "$1" ]
+ then os=`echo "$1" | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze*)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
+ os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2v[4-9]*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5v6*)
+ # Don't forget version if it is 3.2v4 or newer.
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco*)
+ os=-sco3.2v2
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -udk*)
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -isc)
+ os=-isc2.2
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -clix*)
+ basic_machine=clipper-intergraph
+ ;;
+ -isc*)
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -lynx*178)
+ os=-lynxos178
+ ;;
+ -lynx*5)
+ os=-lynxos5
+ ;;
+ -lynx*)
+ os=-lynxos
+ ;;
+ -ptx*)
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'`
+ ;;
+ -psos*)
+ os=-psos
+ ;;
+ -mint | -mint[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+ # Recognize the basic CPU types without company name.
+ # Some are omitted here because they have special meanings below.
+ 1750a | 580 \
+ | a29k \
+ | aarch64 | aarch64_be \
+ | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+ | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+ | am33_2.0 \
+ | arc | arceb \
+ | arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
+ | avr | avr32 \
+ | ba \
+ | be32 | be64 \
+ | bfin \
+ | c4x | c8051 | clipper \
+ | d10v | d30v | dlx | dsp16xx \
+ | e2k | epiphany \
+ | fido | fr30 | frv | ft32 \
+ | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+ | hexagon \
+ | i370 | i860 | i960 | ia16 | ia64 \
+ | ip2k | iq2000 \
+ | k1om \
+ | le32 | le64 \
+ | lm32 \
+ | m32c | m32r | m32rle | m68000 | m68k | m88k \
+ | maxq | mb | microblaze | microblazeel | mcore | mep | metag \
+ | mips | mipsbe | mipseb | mipsel | mipsle \
+ | mips16 \
+ | mips64 | mips64el \
+ | mips64octeon | mips64octeonel \
+ | mips64orion | mips64orionel \
+ | mips64r5900 | mips64r5900el \
+ | mips64vr | mips64vrel \
+ | mips64vr4100 | mips64vr4100el \
+ | mips64vr4300 | mips64vr4300el \
+ | mips64vr5000 | mips64vr5000el \
+ | mips64vr5900 | mips64vr5900el \
+ | mipsisa32 | mipsisa32el \
+ | mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
+ | mipsisa64 | mipsisa64el \
+ | mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
+ | mipsisa64sb1 | mipsisa64sb1el \
+ | mipsisa64sr71k | mipsisa64sr71kel \
+ | mipsr5900 | mipsr5900el \
+ | mipstx39 | mipstx39el \
+ | mn10200 | mn10300 \
+ | moxie \
+ | mt \
+ | msp430 \
+ | nds32 | nds32le | nds32be \
+ | nios | nios2 | nios2eb | nios2el \
+ | ns16k | ns32k \
+ | open8 | or1k | or1knd | or32 \
+ | pdp10 | pj | pjl \
+ | powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pru \
+ | pyramid \
+ | riscv32 | riscv64 \
+ | rl78 | rx \
+ | score \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh64 | sh64le \
+ | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
+ | sparcv8 | sparcv9 | sparcv9b | sparcv9v \
+ | spu \
+ | tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
+ | ubicom32 \
+ | v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+ | visium \
+ | wasm32 \
+ | x86 | xc16x | xstormy16 | xtensa \
+ | z8k | z80)
+ basic_machine=$basic_machine-unknown
+ ;;
+ c54x)
+ basic_machine=tic54x-unknown
+ ;;
+ c55x)
+ basic_machine=tic55x-unknown
+ ;;
+ c6x)
+ basic_machine=tic6x-unknown
+ ;;
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65)
+ ;;
+ ms1)
+ basic_machine=mt-unknown
+ ;;
+
+ strongarm | thumb | xscale)
+ basic_machine=arm-unknown
+ ;;
+ xgate)
+ basic_machine=$basic_machine-unknown
+ os=-none
+ ;;
+ xscaleeb)
+ basic_machine=armeb-unknown
+ ;;
+
+ xscaleel)
+ basic_machine=armel-unknown
+ ;;
+
+ # We use `pc' rather than `unknown'
+ # because (1) that's what they normally are, and
+ # (2) the word "unknown" tends to confuse beginning users.
+ i*86 | x86_64)
+ basic_machine=$basic_machine-pc
+ ;;
+ # Object if more than one company name word.
+ *-*-*)
+ echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
+ exit 1
+ ;;
+ # Recognize the basic CPU types with company name.
+ 580-* \
+ | a29k-* \
+ | aarch64-* | aarch64_be-* \
+ | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+ | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+ | alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
+ | arm-* | armbe-* | armle-* | armeb-* | armv*-* \
+ | avr-* | avr32-* \
+ | ba-* \
+ | be32-* | be64-* \
+ | bfin-* | bs2000-* \
+ | c[123]* | c30-* | [cjt]90-* | c4x-* \
+ | c8051-* | clipper-* | craynv-* | cydra-* \
+ | d10v-* | d30v-* | dlx-* \
+ | e2k-* | elxsi-* \
+ | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
+ | h8300-* | h8500-* \
+ | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+ | hexagon-* \
+ | i*86-* | i860-* | i960-* | ia16-* | ia64-* \
+ | ip2k-* | iq2000-* \
+ | k1om-* \
+ | le32-* | le64-* \
+ | lm32-* \
+ | m32c-* | m32r-* | m32rle-* \
+ | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+ | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \
+ | microblaze-* | microblazeel-* \
+ | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+ | mips16-* \
+ | mips64-* | mips64el-* \
+ | mips64octeon-* | mips64octeonel-* \
+ | mips64orion-* | mips64orionel-* \
+ | mips64r5900-* | mips64r5900el-* \
+ | mips64vr-* | mips64vrel-* \
+ | mips64vr4100-* | mips64vr4100el-* \
+ | mips64vr4300-* | mips64vr4300el-* \
+ | mips64vr5000-* | mips64vr5000el-* \
+ | mips64vr5900-* | mips64vr5900el-* \
+ | mipsisa32-* | mipsisa32el-* \
+ | mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
+ | mipsisa64-* | mipsisa64el-* \
+ | mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
+ | mipsisa64sb1-* | mipsisa64sb1el-* \
+ | mipsisa64sr71k-* | mipsisa64sr71kel-* \
+ | mipsr5900-* | mipsr5900el-* \
+ | mipstx39-* | mipstx39el-* \
+ | mmix-* \
+ | mt-* \
+ | msp430-* \
+ | nds32-* | nds32le-* | nds32be-* \
+ | nios-* | nios2-* | nios2eb-* | nios2el-* \
+ | none-* | np1-* | ns16k-* | ns32k-* \
+ | open8-* \
+ | or1k*-* \
+ | orion-* \
+ | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+ | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pru-* \
+ | pyramid-* \
+ | riscv32-* | riscv64-* \
+ | rl78-* | romp-* | rs6000-* | rx-* \
+ | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
+ | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+ | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
+ | sparclite-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
+ | tahoe-* \
+ | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+ | tile*-* \
+ | tron-* \
+ | ubicom32-* \
+ | v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
+ | vax-* \
+ | visium-* \
+ | wasm32-* \
+ | we32k-* \
+ | x86-* | x86_64-* | xc16x-* | xps100-* \
+ | xstormy16-* | xtensa*-* \
+ | ymp-* \
+ | z8k-* | z80-*)
+ ;;
+ # Recognize the basic CPU types without company name, with glob match.
+ xtensa*)
+ basic_machine=$basic_machine-unknown
+ ;;
+ # Recognize the various machine names and aliases which stand
+ # for a CPU type and a company and sometimes even an OS.
+ 386bsd)
+ basic_machine=i386-pc
+ os=-bsd
+ ;;
+ 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+ basic_machine=m68000-att
+ ;;
+ 3b*)
+ basic_machine=we32k-att
+ ;;
+ a29khif)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ abacus)
+ basic_machine=abacus-unknown
+ ;;
+ adobe68k)
+ basic_machine=m68010-adobe
+ os=-scout
+ ;;
+ alliant | fx80)
+ basic_machine=fx80-alliant
+ ;;
+ altos | altos3068)
+ basic_machine=m68k-altos
+ ;;
+ am29k)
+ basic_machine=a29k-none
+ os=-bsd
+ ;;
+ amd64)
+ basic_machine=x86_64-pc
+ ;;
+ amd64-*)
+ basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ amdahl)
+ basic_machine=580-amdahl
+ os=-sysv
+ ;;
+ amiga | amiga-*)
+ basic_machine=m68k-unknown
+ ;;
+ amigaos | amigados)
+ basic_machine=m68k-unknown
+ os=-amigaos
+ ;;
+ amigaunix | amix)
+ basic_machine=m68k-unknown
+ os=-sysv4
+ ;;
+ apollo68)
+ basic_machine=m68k-apollo
+ os=-sysv
+ ;;
+ apollo68bsd)
+ basic_machine=m68k-apollo
+ os=-bsd
+ ;;
+ aros)
+ basic_machine=i386-pc
+ os=-aros
+ ;;
+ asmjs)
+ basic_machine=asmjs-unknown
+ ;;
+ aux)
+ basic_machine=m68k-apple
+ os=-aux
+ ;;
+ balance)
+ basic_machine=ns32k-sequent
+ os=-dynix
+ ;;
+ blackfin)
+ basic_machine=bfin-unknown
+ os=-linux
+ ;;
+ blackfin-*)
+ basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ bluegene*)
+ basic_machine=powerpc-ibm
+ os=-cnk
+ ;;
+ c54x-*)
+ basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ c55x-*)
+ basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ c6x-*)
+ basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ c90)
+ basic_machine=c90-cray
+ os=-unicos
+ ;;
+ cegcc)
+ basic_machine=arm-unknown
+ os=-cegcc
+ ;;
+ convex-c1)
+ basic_machine=c1-convex
+ os=-bsd
+ ;;
+ convex-c2)
+ basic_machine=c2-convex
+ os=-bsd
+ ;;
+ convex-c32)
+ basic_machine=c32-convex
+ os=-bsd
+ ;;
+ convex-c34)
+ basic_machine=c34-convex
+ os=-bsd
+ ;;
+ convex-c38)
+ basic_machine=c38-convex
+ os=-bsd
+ ;;
+ cray | j90)
+ basic_machine=j90-cray
+ os=-unicos
+ ;;
+ craynv)
+ basic_machine=craynv-cray
+ os=-unicosmp
+ ;;
+ cr16 | cr16-*)
+ basic_machine=cr16-unknown
+ os=-elf
+ ;;
+ crds | unos)
+ basic_machine=m68k-crds
+ ;;
+ crisv32 | crisv32-* | etraxfs*)
+ basic_machine=crisv32-axis
+ ;;
+ cris | cris-* | etrax*)
+ basic_machine=cris-axis
+ ;;
+ crx)
+ basic_machine=crx-unknown
+ os=-elf
+ ;;
+ da30 | da30-*)
+ basic_machine=m68k-da30
+ ;;
+ decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+ basic_machine=mips-dec
+ ;;
+ decsystem10* | dec10*)
+ basic_machine=pdp10-dec
+ os=-tops10
+ ;;
+ decsystem20* | dec20*)
+ basic_machine=pdp10-dec
+ os=-tops20
+ ;;
+ delta | 3300 | motorola-3300 | motorola-delta \
+ | 3300-motorola | delta-motorola)
+ basic_machine=m68k-motorola
+ ;;
+ delta88)
+ basic_machine=m88k-motorola
+ os=-sysv3
+ ;;
+ dicos)
+ basic_machine=i686-pc
+ os=-dicos
+ ;;
+ djgpp)
+ basic_machine=i586-pc
+ os=-msdosdjgpp
+ ;;
+ dpx20 | dpx20-*)
+ basic_machine=rs6000-bull
+ os=-bosx
+ ;;
+ dpx2*)
+ basic_machine=m68k-bull
+ os=-sysv3
+ ;;
+ e500v[12])
+ basic_machine=powerpc-unknown
+ os=$os"spe"
+ ;;
+ e500v[12]-*)
+ basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ os=$os"spe"
+ ;;
+ ebmon29k)
+ basic_machine=a29k-amd
+ os=-ebmon
+ ;;
+ elxsi)
+ basic_machine=elxsi-elxsi
+ os=-bsd
+ ;;
+ encore | umax | mmax)
+ basic_machine=ns32k-encore
+ ;;
+ es1800 | OSE68k | ose68k | ose | OSE)
+ basic_machine=m68k-ericsson
+ os=-ose
+ ;;
+ fx2800)
+ basic_machine=i860-alliant
+ ;;
+ genix)
+ basic_machine=ns32k-ns
+ ;;
+ gmicro)
+ basic_machine=tron-gmicro
+ os=-sysv
+ ;;
+ go32)
+ basic_machine=i386-pc
+ os=-go32
+ ;;
+ h3050r* | hiux*)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ h8300hms)
+ basic_machine=h8300-hitachi
+ os=-hms
+ ;;
+ h8300xray)
+ basic_machine=h8300-hitachi
+ os=-xray
+ ;;
+ h8500hms)
+ basic_machine=h8500-hitachi
+ os=-hms
+ ;;
+ harris)
+ basic_machine=m88k-harris
+ os=-sysv3
+ ;;
+ hp300-*)
+ basic_machine=m68k-hp
+ ;;
+ hp300bsd)
+ basic_machine=m68k-hp
+ os=-bsd
+ ;;
+ hp300hpux)
+ basic_machine=m68k-hp
+ os=-hpux
+ ;;
+ hp3k9[0-9][0-9] | hp9[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k2[0-9][0-9] | hp9k31[0-9])
+ basic_machine=m68000-hp
+ ;;
+ hp9k3[2-9][0-9])
+ basic_machine=m68k-hp
+ ;;
+ hp9k6[0-9][0-9] | hp6[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hp9k7[0-79][0-9] | hp7[0-79][0-9])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k78[0-9] | hp78[0-9])
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+ # FIXME: really hppa2.0-hp
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][13679] | hp8[0-9][13679])
+ basic_machine=hppa1.1-hp
+ ;;
+ hp9k8[0-9][0-9] | hp8[0-9][0-9])
+ basic_machine=hppa1.0-hp
+ ;;
+ hppaosf)
+ basic_machine=hppa1.1-hp
+ os=-osf
+ ;;
+ hppro)
+ basic_machine=hppa1.1-hp
+ os=-proelf
+ ;;
+ i370-ibm* | ibm*)
+ basic_machine=i370-ibm
+ ;;
+ i*86v32)
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
+ os=-sysv32
+ ;;
+ i*86v4*)
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
+ os=-sysv4
+ ;;
+ i*86v)
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
+ os=-sysv
+ ;;
+ i*86sol2)
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
+ os=-solaris2
+ ;;
+ i386mach)
+ basic_machine=i386-mach
+ os=-mach
+ ;;
+ vsta)
+ basic_machine=i386-unknown
+ os=-vsta
+ ;;
+ iris | iris4d)
+ basic_machine=mips-sgi
+ case $os in
+ -irix*)
+ ;;
+ *)
+ os=-irix4
+ ;;
+ esac
+ ;;
+ isi68 | isi)
+ basic_machine=m68k-isi
+ os=-sysv
+ ;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'`
+ ;;
+ m68knommu)
+ basic_machine=m68k-unknown
+ os=-linux
+ ;;
+ m68knommu-*)
+ basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ magnum | m3230)
+ basic_machine=mips-mips
+ os=-sysv
+ ;;
+ merlin)
+ basic_machine=ns32k-utek
+ os=-sysv
+ ;;
+ microblaze*)
+ basic_machine=microblaze-xilinx
+ ;;
+ mingw64)
+ basic_machine=x86_64-pc
+ os=-mingw64
+ ;;
+ mingw32)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ mingw32ce)
+ basic_machine=arm-unknown
+ os=-mingw32ce
+ ;;
+ miniframe)
+ basic_machine=m68000-convergent
+ ;;
+ *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+ basic_machine=m68k-atari
+ os=-mint
+ ;;
+ mips3*-*)
+ basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`
+ ;;
+ mips3*)
+ basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown
+ ;;
+ monitor)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ morphos)
+ basic_machine=powerpc-unknown
+ os=-morphos
+ ;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
+ msdos)
+ basic_machine=i386-pc
+ os=-msdos
+ ;;
+ ms1-*)
+ basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'`
+ ;;
+ msys)
+ basic_machine=i686-pc
+ os=-msys
+ ;;
+ mvs)
+ basic_machine=i370-ibm
+ os=-mvs
+ ;;
+ nacl)
+ basic_machine=le32-unknown
+ os=-nacl
+ ;;
+ ncr3000)
+ basic_machine=i486-ncr
+ os=-sysv4
+ ;;
+ netbsd386)
+ basic_machine=i386-unknown
+ os=-netbsd
+ ;;
+ netwinder)
+ basic_machine=armv4l-rebel
+ os=-linux
+ ;;
+ news | news700 | news800 | news900)
+ basic_machine=m68k-sony
+ os=-newsos
+ ;;
+ news1000)
+ basic_machine=m68030-sony
+ os=-newsos
+ ;;
+ news-3600 | risc-news)
+ basic_machine=mips-sony
+ os=-newsos
+ ;;
+ necv70)
+ basic_machine=v70-nec
+ os=-sysv
+ ;;
+ next | m*-next)
+ basic_machine=m68k-next
+ case $os in
+ -nextstep* )
+ ;;
+ -ns2*)
+ os=-nextstep2
+ ;;
+ *)
+ os=-nextstep3
+ ;;
+ esac
+ ;;
+ nh3000)
+ basic_machine=m68k-harris
+ os=-cxux
+ ;;
+ nh[45]000)
+ basic_machine=m88k-harris
+ os=-cxux
+ ;;
+ nindy960)
+ basic_machine=i960-intel
+ os=-nindy
+ ;;
+ mon960)
+ basic_machine=i960-intel
+ os=-mon960
+ ;;
+ nonstopux)
+ basic_machine=mips-compaq
+ os=-nonstopux
+ ;;
+ np1)
+ basic_machine=np1-gould
+ ;;
+ neo-tandem)
+ basic_machine=neo-tandem
+ ;;
+ nse-tandem)
+ basic_machine=nse-tandem
+ ;;
+ nsr-tandem)
+ basic_machine=nsr-tandem
+ ;;
+ nsv-tandem)
+ basic_machine=nsv-tandem
+ ;;
+ nsx-tandem)
+ basic_machine=nsx-tandem
+ ;;
+ op50n-* | op60c-*)
+ basic_machine=hppa1.1-oki
+ os=-proelf
+ ;;
+ openrisc | openrisc-*)
+ basic_machine=or32-unknown
+ ;;
+ os400)
+ basic_machine=powerpc-ibm
+ os=-os400
+ ;;
+ OSE68000 | ose68000)
+ basic_machine=m68000-ericsson
+ os=-ose
+ ;;
+ os68k)
+ basic_machine=m68k-none
+ os=-os68k
+ ;;
+ pa-hitachi)
+ basic_machine=hppa1.1-hitachi
+ os=-hiuxwe2
+ ;;
+ paragon)
+ basic_machine=i860-intel
+ os=-osf
+ ;;
+ parisc)
+ basic_machine=hppa-unknown
+ os=-linux
+ ;;
+ parisc-*)
+ basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ os=-linux
+ ;;
+ pbd)
+ basic_machine=sparc-tti
+ ;;
+ pbb)
+ basic_machine=m68k-tti
+ ;;
+ pc532 | pc532-*)
+ basic_machine=ns32k-pc532
+ ;;
+ pc98)
+ basic_machine=i386-pc
+ ;;
+ pc98-*)
+ basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ pentium | p5 | k5 | k6 | nexgen | viac3)
+ basic_machine=i586-pc
+ ;;
+ pentiumpro | p6 | 6x86 | athlon | athlon_*)
+ basic_machine=i686-pc
+ ;;
+ pentiumii | pentium2 | pentiumiii | pentium3)
+ basic_machine=i686-pc
+ ;;
+ pentium4)
+ basic_machine=i786-pc
+ ;;
+ pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+ basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ pentiumpro-* | p6-* | 6x86-* | athlon-*)
+ basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+ basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ pentium4-*)
+ basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ pn)
+ basic_machine=pn-gould
+ ;;
+ power) basic_machine=power-ibm
+ ;;
+ ppc | ppcbe) basic_machine=powerpc-unknown
+ ;;
+ ppc-* | ppcbe-*)
+ basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ ppcle | powerpclittle)
+ basic_machine=powerpcle-unknown
+ ;;
+ ppcle-* | powerpclittle-*)
+ basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ ppc64) basic_machine=powerpc64-unknown
+ ;;
+ ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ ppc64le | powerpc64little)
+ basic_machine=powerpc64le-unknown
+ ;;
+ ppc64le-* | powerpc64little-*)
+ basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ ps2)
+ basic_machine=i386-ibm
+ ;;
+ pw32)
+ basic_machine=i586-unknown
+ os=-pw32
+ ;;
+ rdos | rdos64)
+ basic_machine=x86_64-pc
+ os=-rdos
+ ;;
+ rdos32)
+ basic_machine=i386-pc
+ os=-rdos
+ ;;
+ rom68k)
+ basic_machine=m68k-rom68k
+ os=-coff
+ ;;
+ rm[46]00)
+ basic_machine=mips-siemens
+ ;;
+ rtpc | rtpc-*)
+ basic_machine=romp-ibm
+ ;;
+ s390 | s390-*)
+ basic_machine=s390-ibm
+ ;;
+ s390x | s390x-*)
+ basic_machine=s390x-ibm
+ ;;
+ sa29200)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ sb1)
+ basic_machine=mipsisa64sb1-unknown
+ ;;
+ sb1el)
+ basic_machine=mipsisa64sb1el-unknown
+ ;;
+ sde)
+ basic_machine=mipsisa32-sde
+ os=-elf
+ ;;
+ sei)
+ basic_machine=mips-sei
+ os=-seiux
+ ;;
+ sequent)
+ basic_machine=i386-sequent
+ ;;
+ sh5el)
+ basic_machine=sh5le-unknown
+ ;;
+ simso-wrs)
+ basic_machine=sparclite-wrs
+ os=-vxworks
+ ;;
+ sps7)
+ basic_machine=m68k-bull
+ os=-sysv2
+ ;;
+ spur)
+ basic_machine=spur-unknown
+ ;;
+ st2000)
+ basic_machine=m68k-tandem
+ ;;
+ stratus)
+ basic_machine=i860-stratus
+ os=-sysv4
+ ;;
+ strongarm-* | thumb-*)
+ basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ ;;
+ sun2)
+ basic_machine=m68000-sun
+ ;;
+ sun2os3)
+ basic_machine=m68000-sun
+ os=-sunos3
+ ;;
+ sun2os4)
+ basic_machine=m68000-sun
+ os=-sunos4
+ ;;
+ sun3os3)
+ basic_machine=m68k-sun
+ os=-sunos3
+ ;;
+ sun3os4)
+ basic_machine=m68k-sun
+ os=-sunos4
+ ;;
+ sun4os3)
+ basic_machine=sparc-sun
+ os=-sunos3
+ ;;
+ sun4os4)
+ basic_machine=sparc-sun
+ os=-sunos4
+ ;;
+ sun4sol2)
+ basic_machine=sparc-sun
+ os=-solaris2
+ ;;
+ sun3 | sun3-*)
+ basic_machine=m68k-sun
+ ;;
+ sun4)
+ basic_machine=sparc-sun
+ ;;
+ sun386 | sun386i | roadrunner)
+ basic_machine=i386-sun
+ ;;
+ sv1)
+ basic_machine=sv1-cray
+ os=-unicos
+ ;;
+ symmetry)
+ basic_machine=i386-sequent
+ os=-dynix
+ ;;
+ t3e)
+ basic_machine=alphaev5-cray
+ os=-unicos
+ ;;
+ t90)
+ basic_machine=t90-cray
+ os=-unicos
+ ;;
+ tile*)
+ basic_machine=$basic_machine-unknown
+ os=-linux-gnu
+ ;;
+ tx39)
+ basic_machine=mipstx39-unknown
+ ;;
+ tx39el)
+ basic_machine=mipstx39el-unknown
+ ;;
+ toad1)
+ basic_machine=pdp10-xkl
+ os=-tops20
+ ;;
+ tower | tower-32)
+ basic_machine=m68k-ncr
+ ;;
+ tpf)
+ basic_machine=s390x-ibm
+ os=-tpf
+ ;;
+ udi29k)
+ basic_machine=a29k-amd
+ os=-udi
+ ;;
+ ultra3)
+ basic_machine=a29k-nyu
+ os=-sym1
+ ;;
+ v810 | necv810)
+ basic_machine=v810-nec
+ os=-none
+ ;;
+ vaxv)
+ basic_machine=vax-dec
+ os=-sysv
+ ;;
+ vms)
+ basic_machine=vax-dec
+ os=-vms
+ ;;
+ vpp*|vx|vx-*)
+ basic_machine=f301-fujitsu
+ ;;
+ vxworks960)
+ basic_machine=i960-wrs
+ os=-vxworks
+ ;;
+ vxworks68)
+ basic_machine=m68k-wrs
+ os=-vxworks
+ ;;
+ vxworks29k)
+ basic_machine=a29k-wrs
+ os=-vxworks
+ ;;
+ w65*)
+ basic_machine=w65-wdc
+ os=-none
+ ;;
+ w89k-*)
+ basic_machine=hppa1.1-winbond
+ os=-proelf
+ ;;
+ x64)
+ basic_machine=x86_64-pc
+ ;;
+ xbox)
+ basic_machine=i686-pc
+ os=-mingw32
+ ;;
+ xps | xps100)
+ basic_machine=xps100-honeywell
+ ;;
+ xscale-* | xscalee[bl]-*)
+ basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'`
+ ;;
+ ymp)
+ basic_machine=ymp-cray
+ os=-unicos
+ ;;
+ none)
+ basic_machine=none-none
+ os=-none
+ ;;
+
+# Here we handle the default manufacturer of certain CPU types. It is in
+# some cases the only manufacturer, in others, it is the most popular.
+ w89k)
+ basic_machine=hppa1.1-winbond
+ ;;
+ op50n)
+ basic_machine=hppa1.1-oki
+ ;;
+ op60c)
+ basic_machine=hppa1.1-oki
+ ;;
+ romp)
+ basic_machine=romp-ibm
+ ;;
+ mmix)
+ basic_machine=mmix-knuth
+ ;;
+ rs6000)
+ basic_machine=rs6000-ibm
+ ;;
+ vax)
+ basic_machine=vax-dec
+ ;;
+ pdp11)
+ basic_machine=pdp11-dec
+ ;;
+ we32k)
+ basic_machine=we32k-att
+ ;;
+ sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
+ basic_machine=sh-unknown
+ ;;
+ cydra)
+ basic_machine=cydra-cydrome
+ ;;
+ orion)
+ basic_machine=orion-highlevel
+ ;;
+ orion105)
+ basic_machine=clipper-highlevel
+ ;;
+ mac | mpw | mac-mpw)
+ basic_machine=m68k-apple
+ ;;
+ pmac | pmac-mpw)
+ basic_machine=powerpc-apple
+ ;;
+ *-unknown)
+ # Make sure to match an already-canonicalized machine name.
+ ;;
+ *)
+ echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+ *-digital*)
+ basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'`
+ ;;
+ *-commodore*)
+ basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'`
+ ;;
+ *)
+ ;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+ # First match some system type aliases that might get confused
+ # with valid system types.
+ # -solaris* is a basic system type, with this one exception.
+ -auroraux)
+ os=-auroraux
+ ;;
+ -solaris1 | -solaris1.*)
+ os=`echo $os | sed -e 's|solaris1|sunos4|'`
+ ;;
+ -solaris)
+ os=-solaris2
+ ;;
+ -unixware*)
+ os=-sysv4.2uw
+ ;;
+ -gnu/linux*)
+ os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+ ;;
+ # es1800 is here to avoid being matched by es* (a different OS)
+ -es1800*)
+ os=-ose
+ ;;
+ # Now accept the basic system types.
+ # The portable systems comes first.
+ # Each alternative MUST end in a * to match a version number.
+ # -sysv* is not here because it comes later, after sysvr4.
+ -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+ | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
+ | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
+ | -sym* | -kopensolaris* | -plan9* \
+ | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+ | -aos* | -aros* | -cloudabi* | -sortix* \
+ | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+ | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+ | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
+ | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+ | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* | -hcos* \
+ | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
+ | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+ | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -linux-newlib* | -linux-musl* | -linux-uclibc* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \
+ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+ | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+ | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+ | -morphos* | -superux* | -rtmk* | -windiss* \
+ | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+ | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \
+ | -midnightbsd*)
+ # Remember, each alternative MUST END IN *, to match a version number.
+ ;;
+ -qnx*)
+ case $basic_machine in
+ x86-* | i*86-*)
+ ;;
+ *)
+ os=-nto$os
+ ;;
+ esac
+ ;;
+ -nto-qnx*)
+ ;;
+ -nto*)
+ os=`echo $os | sed -e 's|nto|nto-qnx|'`
+ ;;
+ -sim | -xray | -os68k* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* \
+ | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+ ;;
+ -mac*)
+ os=`echo "$os" | sed -e 's|mac|macos|'`
+ ;;
+ -linux-dietlibc)
+ os=-linux-dietlibc
+ ;;
+ -linux*)
+ os=`echo $os | sed -e 's|linux|linux-gnu|'`
+ ;;
+ -sunos5*)
+ os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
+ ;;
+ -sunos6*)
+ os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
+ ;;
+ -opened*)
+ os=-openedition
+ ;;
+ -os400*)
+ os=-os400
+ ;;
+ -wince*)
+ os=-wince
+ ;;
+ -utek*)
+ os=-bsd
+ ;;
+ -dynix*)
+ os=-bsd
+ ;;
+ -acis*)
+ os=-aos
+ ;;
+ -atheos*)
+ os=-atheos
+ ;;
+ -syllable*)
+ os=-syllable
+ ;;
+ -386bsd)
+ os=-bsd
+ ;;
+ -ctix* | -uts*)
+ os=-sysv
+ ;;
+ -nova*)
+ os=-rtmk-nova
+ ;;
+ -ns2)
+ os=-nextstep2
+ ;;
+ -nsk*)
+ os=-nsk
+ ;;
+ # Preserve the version number of sinix5.
+ -sinix5.*)
+ os=`echo $os | sed -e 's|sinix|sysv|'`
+ ;;
+ -sinix*)
+ os=-sysv4
+ ;;
+ -tpf*)
+ os=-tpf
+ ;;
+ -triton*)
+ os=-sysv3
+ ;;
+ -oss*)
+ os=-sysv3
+ ;;
+ -svr4*)
+ os=-sysv4
+ ;;
+ -svr3)
+ os=-sysv3
+ ;;
+ -sysvr4)
+ os=-sysv4
+ ;;
+ # This must come after -sysvr4.
+ -sysv*)
+ ;;
+ -ose*)
+ os=-ose
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ os=-mint
+ ;;
+ -zvmoe)
+ os=-zvmoe
+ ;;
+ -dicos*)
+ os=-dicos
+ ;;
+ -pikeos*)
+ # Until real need of OS specific support for
+ # particular features comes up, bare metal
+ # configurations are quite functional.
+ case $basic_machine in
+ arm*)
+ os=-eabi
+ ;;
+ *)
+ os=-elf
+ ;;
+ esac
+ ;;
+ -nacl*)
+ ;;
+ -ios)
+ ;;
+ -none)
+ ;;
+ *)
+ # Get rid of the `-' at the beginning of $os.
+ os=`echo $os | sed 's/[^-]*-//'`
+ echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
+ exit 1
+ ;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system. Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+ score-*)
+ os=-elf
+ ;;
+ spu-*)
+ os=-elf
+ ;;
+ *-acorn)
+ os=-riscix1.2
+ ;;
+ arm*-rebel)
+ os=-linux
+ ;;
+ arm*-semi)
+ os=-aout
+ ;;
+ c4x-* | tic4x-*)
+ os=-coff
+ ;;
+ c8051-*)
+ os=-elf
+ ;;
+ hexagon-*)
+ os=-elf
+ ;;
+ tic54x-*)
+ os=-coff
+ ;;
+ tic55x-*)
+ os=-coff
+ ;;
+ tic6x-*)
+ os=-coff
+ ;;
+ # This must come before the *-dec entry.
+ pdp10-*)
+ os=-tops20
+ ;;
+ pdp11-*)
+ os=-none
+ ;;
+ *-dec | vax-*)
+ os=-ultrix4.2
+ ;;
+ m68*-apollo)
+ os=-domain
+ ;;
+ i386-sun)
+ os=-sunos4.0.2
+ ;;
+ m68000-sun)
+ os=-sunos3
+ ;;
+ m68*-cisco)
+ os=-aout
+ ;;
+ mep-*)
+ os=-elf
+ ;;
+ mips*-cisco)
+ os=-elf
+ ;;
+ mips*-*)
+ os=-elf
+ ;;
+ or32-*)
+ os=-coff
+ ;;
+ *-tti) # must be before sparc entry or we get the wrong os.
+ os=-sysv3
+ ;;
+ sparc-* | *-sun)
+ os=-sunos4.1.1
+ ;;
+ pru-*)
+ os=-elf
+ ;;
+ *-be)
+ os=-beos
+ ;;
+ *-ibm)
+ os=-aix
+ ;;
+ *-knuth)
+ os=-mmixware
+ ;;
+ *-wec)
+ os=-proelf
+ ;;
+ *-winbond)
+ os=-proelf
+ ;;
+ *-oki)
+ os=-proelf
+ ;;
+ *-hp)
+ os=-hpux
+ ;;
+ *-hitachi)
+ os=-hiux
+ ;;
+ i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+ os=-sysv
+ ;;
+ *-cbm)
+ os=-amigaos
+ ;;
+ *-dg)
+ os=-dgux
+ ;;
+ *-dolphin)
+ os=-sysv3
+ ;;
+ m68k-ccur)
+ os=-rtu
+ ;;
+ m88k-omron*)
+ os=-luna
+ ;;
+ *-next)
+ os=-nextstep
+ ;;
+ *-sequent)
+ os=-ptx
+ ;;
+ *-crds)
+ os=-unos
+ ;;
+ *-ns)
+ os=-genix
+ ;;
+ i370-*)
+ os=-mvs
+ ;;
+ *-gould)
+ os=-sysv
+ ;;
+ *-highlevel)
+ os=-bsd
+ ;;
+ *-encore)
+ os=-bsd
+ ;;
+ *-sgi)
+ os=-irix
+ ;;
+ *-siemens)
+ os=-sysv4
+ ;;
+ *-masscomp)
+ os=-rtu
+ ;;
+ f30[01]-fujitsu | f700-fujitsu)
+ os=-uxpv
+ ;;
+ *-rom68k)
+ os=-coff
+ ;;
+ *-*bug)
+ os=-coff
+ ;;
+ *-apple)
+ os=-macos
+ ;;
+ *-atari*)
+ os=-mint
+ ;;
+ *)
+ os=-none
+ ;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer. We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+ *-unknown)
+ case $os in
+ -riscix*)
+ vendor=acorn
+ ;;
+ -sunos*)
+ vendor=sun
+ ;;
+ -cnk*|-aix*)
+ vendor=ibm
+ ;;
+ -beos*)
+ vendor=be
+ ;;
+ -hpux*)
+ vendor=hp
+ ;;
+ -mpeix*)
+ vendor=hp
+ ;;
+ -hiux*)
+ vendor=hitachi
+ ;;
+ -unos*)
+ vendor=crds
+ ;;
+ -dgux*)
+ vendor=dg
+ ;;
+ -luna*)
+ vendor=omron
+ ;;
+ -genix*)
+ vendor=ns
+ ;;
+ -mvs* | -opened*)
+ vendor=ibm
+ ;;
+ -os400*)
+ vendor=ibm
+ ;;
+ -ptx*)
+ vendor=sequent
+ ;;
+ -tpf*)
+ vendor=ibm
+ ;;
+ -vxsim* | -vxworks* | -windiss*)
+ vendor=wrs
+ ;;
+ -aux*)
+ vendor=apple
+ ;;
+ -hms*)
+ vendor=hitachi
+ ;;
+ -mpw* | -macos*)
+ vendor=apple
+ ;;
+ -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+ vendor=atari
+ ;;
+ -vos*)
+ vendor=stratus
+ ;;
+ esac
+ basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"`
+ ;;
+esac
+
+echo "$basic_machine$os"
+exit
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:
diff --git a/configure b/configure
new file mode 100755
index 0000000..984f3e4
--- /dev/null
+++ b/configure
@@ -0,0 +1,16129 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for libpng 1.6.35.
+#
+# Report bugs to <png-mng-implement@lists.sourceforge.net>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1
+
+ test -n \"\${ZSH_VERSION+set}\${BASH_VERSION+set}\" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ ECHO=\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO\$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test \"X\`printf %s \$ECHO\`\" = \"X\$ECHO\" \\
+ || test \"X\`print -r -- \$ECHO\`\" = \"X\$ECHO\" ) || exit 1"
+ if (eval "$as_required") 2>/dev/null; then :
+ as_have_required=yes
+else
+ as_have_required=no
+fi
+ if test x$as_have_required = xyes && (eval "$as_suggested") 2>/dev/null; then :
+
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+as_found=false
+for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ as_found=:
+ case $as_dir in #(
+ /*)
+ for as_base in sh bash ksh sh5; do
+ # Try only shells that exist, to save several forks.
+ as_shell=$as_dir/$as_base
+ if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ CONFIG_SHELL=$as_shell as_have_required=yes
+ if { $as_echo "$as_bourne_compatible""$as_suggested" | as_run=a "$as_shell"; } 2>/dev/null; then :
+ break 2
+fi
+fi
+ done;;
+ esac
+ as_found=false
+done
+$as_found || { if { test -f "$SHELL" || test -f "$SHELL.exe"; } &&
+ { $as_echo "$as_bourne_compatible""$as_required" | as_run=a "$SHELL"; } 2>/dev/null; then :
+ CONFIG_SHELL=$SHELL as_have_required=yes
+fi; }
+IFS=$as_save_IFS
+
+
+ if test "x$CONFIG_SHELL" != x; then :
+ export CONFIG_SHELL
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+exit 255
+fi
+
+ if test x$as_have_required = xno; then :
+ $as_echo "$0: This script requires a shell more modern than all"
+ $as_echo "$0: the shells that I found on your system."
+ if test x${ZSH_VERSION+set} = xset ; then
+ $as_echo "$0: In particular, zsh $ZSH_VERSION has bugs and should"
+ $as_echo "$0: be upgraded to zsh 4.3.4 or later."
+ else
+ $as_echo "$0: Please tell bug-autoconf@gnu.org and
+$0: png-mng-implement@lists.sourceforge.net about your
+$0: system, including any error possibly output before this
+$0: message. Then install a modern shell, or manually run
+$0: the script under such a shell if you do have one."
+ fi
+ exit 1
+fi
+fi
+fi
+SHELL=${CONFIG_SHELL-/bin/sh}
+export SHELL
+# Unset more variables known to interfere with behavior of common tools.
+CLICOLOR_FORCE= GREP_OPTIONS=
+unset CLICOLOR_FORCE GREP_OPTIONS
+
+## --------------------- ##
+## M4sh Shell Functions. ##
+## --------------------- ##
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+
+ as_lineno_1=$LINENO as_lineno_1a=$LINENO
+ as_lineno_2=$LINENO as_lineno_2a=$LINENO
+ eval 'test "x$as_lineno_1'$as_run'" != "x$as_lineno_2'$as_run'" &&
+ test "x`expr $as_lineno_1'$as_run' + 1`" = "x$as_lineno_2'$as_run'"' || {
+ # Blame Lee E. McMahon (1931-1989) for sed's syntax. :-)
+ sed -n '
+ p
+ /[$]LINENO/=
+ ' <$as_myself |
+ sed '
+ s/[$]LINENO.*/&-/
+ t lineno
+ b
+ :lineno
+ N
+ :loop
+ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
+ t loop
+ s/-\n.*//
+ ' >$as_me.lineno &&
+ chmod +x "$as_me.lineno" ||
+ { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2; as_fn_exit 1; }
+
+ # If we had to re-execute with $CONFIG_SHELL, we're ensured to have
+ # already done that, so ensure we don't try to do so again and fall
+ # in an infinite loop. This has already happened in practice.
+ _as_can_reexec=no; export _as_can_reexec
+ # Don't try to exec as it changes $[0], causing all sort of problems
+ # (the dirname of $[0] is not the place where we might find the
+ # original and so on. Autoconf is especially sensitive to this).
+ . "./$as_me.lineno"
+ # Exit status is that of the last command.
+ exit
+}
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+SHELL=${CONFIG_SHELL-/bin/sh}
+
+
+test -n "$DJDIR" || exec 7<&0 </dev/null
+exec 6>&1
+
+# Name of the host.
+# hostname on some systems (SVR3.2, old GNU/Linux) returns a bogus exit status,
+# so uname gets run too.
+ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
+
+#
+# Initializations.
+#
+ac_default_prefix=/usr/local
+ac_clean_files=
+ac_config_libobj_dir=.
+LIBOBJS=
+cross_compiling=no
+subdirs=
+MFLAGS=
+MAKEFLAGS=
+
+# Identity of this package.
+PACKAGE_NAME='libpng'
+PACKAGE_TARNAME='libpng'
+PACKAGE_VERSION='1.6.35'
+PACKAGE_STRING='libpng 1.6.35'
+PACKAGE_BUGREPORT='png-mng-implement@lists.sourceforge.net'
+PACKAGE_URL=''
+
+ac_unique_file="pngget.c"
+# Factoring default headers for most tests.
+ac_includes_default="\
+#include <stdio.h>
+#ifdef HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+#ifdef HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+#ifdef STDC_HEADERS
+# include <stdlib.h>
+# include <stddef.h>
+#else
+# ifdef HAVE_STDLIB_H
+# include <stdlib.h>
+# endif
+#endif
+#ifdef HAVE_STRING_H
+# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
+# include <memory.h>
+# endif
+# include <string.h>
+#endif
+#ifdef HAVE_STRINGS_H
+# include <strings.h>
+#endif
+#ifdef HAVE_INTTYPES_H
+# include <inttypes.h>
+#endif
+#ifdef HAVE_STDINT_H
+# include <stdint.h>
+#endif
+#ifdef HAVE_UNISTD_H
+# include <unistd.h>
+#endif"
+
+ac_subst_vars='am__EXEEXT_FALSE
+am__EXEEXT_TRUE
+LTLIBOBJS
+PNG_POWERPC_VSX_FALSE
+PNG_POWERPC_VSX_TRUE
+PNG_INTEL_SSE_FALSE
+PNG_INTEL_SSE_TRUE
+PNG_MIPS_MSA_FALSE
+PNG_MIPS_MSA_TRUE
+PNG_ARM_NEON_FALSE
+PNG_ARM_NEON_TRUE
+DO_INSTALL_LIBPNG_CONFIG_FALSE
+DO_INSTALL_LIBPNG_CONFIG_TRUE
+DO_INSTALL_LIBPNG_PC_FALSE
+DO_INSTALL_LIBPNG_PC_TRUE
+DO_INSTALL_LINKS_FALSE
+DO_INSTALL_LINKS_TRUE
+DO_PNG_PREFIX_FALSE
+DO_PNG_PREFIX_TRUE
+PNG_PREFIX
+binconfigs
+pkgconfigdir
+PNGLIB_RELEASE
+PNGLIB_MINOR
+PNGLIB_MAJOR
+PNGLIB_VERSION
+SYMBOL_PREFIX
+HAVE_LD_VERSION_SCRIPT_FALSE
+HAVE_LD_VERSION_SCRIPT_TRUE
+HAVE_SOLARIS_LD_FALSE
+HAVE_SOLARIS_LD_TRUE
+HAVE_CLOCK_GETTIME_FALSE
+HAVE_CLOCK_GETTIME_TRUE
+LIBOBJS
+POW_LIB
+PNG_COPTS
+DFNCPP
+LT_SYS_LIBRARY_PATH
+OTOOL64
+OTOOL
+LIPO
+NMEDIT
+DSYMUTIL
+MANIFEST_TOOL
+RANLIB
+ac_ct_AR
+AR
+NM
+ac_ct_DUMPBIN
+DUMPBIN
+LIBTOOL
+OBJDUMP
+DLLTOOL
+AS
+LN_S
+CPP
+LD
+FGREP
+EGREP
+GREP
+SED
+host_os
+host_vendor
+host_cpu
+host
+build_os
+build_vendor
+build_cpu
+build
+am__fastdepCCAS_FALSE
+am__fastdepCCAS_TRUE
+CCASDEPMODE
+CCASFLAGS
+CCAS
+am__fastdepCC_FALSE
+am__fastdepCC_TRUE
+CCDEPMODE
+am__nodep
+AMDEPBACKSLASH
+AMDEP_FALSE
+AMDEP_TRUE
+am__include
+DEPDIR
+OBJEXT
+EXEEXT
+ac_ct_CC
+CPPFLAGS
+LDFLAGS
+CFLAGS
+CC
+MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
+AM_BACKSLASH
+AM_DEFAULT_VERBOSITY
+AM_DEFAULT_V
+AM_V
+am__untar
+am__tar
+AMTAR
+am__leading_dot
+SET_MAKE
+AWK
+mkdir_p
+MKDIR_P
+INSTALL_STRIP_PROGRAM
+STRIP
+install_sh
+MAKEINFO
+AUTOHEADER
+AUTOMAKE
+AUTOCONF
+ACLOCAL
+VERSION
+PACKAGE
+CYGPATH_W
+am__isrc
+INSTALL_DATA
+INSTALL_SCRIPT
+INSTALL_PROGRAM
+target_alias
+host_alias
+build_alias
+LIBS
+ECHO_T
+ECHO_N
+ECHO_C
+DEFS
+mandir
+localedir
+libdir
+psdir
+pdfdir
+dvidir
+htmldir
+infodir
+docdir
+oldincludedir
+includedir
+localstatedir
+sharedstatedir
+sysconfdir
+datadir
+datarootdir
+libexecdir
+sbindir
+bindir
+program_transform_name
+prefix
+exec_prefix
+PACKAGE_URL
+PACKAGE_BUGREPORT
+PACKAGE_STRING
+PACKAGE_VERSION
+PACKAGE_TARNAME
+PACKAGE_NAME
+PATH_SEPARATOR
+SHELL
+am__quote'
+ac_subst_files=''
+ac_user_opts='
+enable_option_checking
+enable_silent_rules
+enable_maintainer_mode
+enable_dependency_tracking
+with_gnu_ld
+enable_shared
+enable_static
+with_pic
+enable_fast_install
+with_aix_soname
+with_sysroot
+enable_libtool_lock
+enable_werror
+with_zlib_prefix
+with_pkgconfigdir
+with_binconfigs
+with_libpng_prefix
+enable_unversioned_links
+enable_unversioned_libpng_pc
+enable_unversioned_libpng_config
+enable_hardware_optimizations
+enable_arm_neon
+enable_mips_msa
+enable_intel_sse
+enable_powerpc_vsx
+'
+ ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+LIBS
+CPPFLAGS
+CCAS
+CCASFLAGS
+CPP
+LT_SYS_LIBRARY_PATH
+PNG_COPTS'
+
+
+# Initialize some variables set by options.
+ac_init_help=
+ac_init_version=false
+ac_unrecognized_opts=
+ac_unrecognized_sep=
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+cache_file=/dev/null
+exec_prefix=NONE
+no_create=
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+verbose=
+x_includes=NONE
+x_libraries=NONE
+
+# Installation directory options.
+# These are left unexpanded so users can "make install exec_prefix=/foo"
+# and all the variables that are supposed to be based on exec_prefix
+# by default will actually change.
+# Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
+
+ac_prev=
+ac_dashdash=
+for ac_option
+do
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval $ac_prev=\$ac_option
+ ac_prev=
+ continue
+ fi
+
+ case $ac_option in
+ *=?*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+ *=) ac_optarg= ;;
+ *) ac_optarg=yes ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case $ac_dashdash$ac_option in
+ --)
+ ac_dashdash=yes ;;
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir=$ac_optarg ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build_alias ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build_alias=$ac_optarg ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file=$ac_optarg ;;
+
+ --config-cache | -C)
+ cache_file=config.cache ;;
+
+ -datadir | --datadir | --datadi | --datad)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=*)
+ datadir=$ac_optarg ;;
+
+ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+ | --dataroo | --dataro | --datar)
+ ac_prev=datarootdir ;;
+ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+ datarootdir=$ac_optarg ;;
+
+ -disable-* | --disable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=no ;;
+
+ -docdir | --docdir | --docdi | --doc | --do)
+ ac_prev=docdir ;;
+ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+ docdir=$ac_optarg ;;
+
+ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+ ac_prev=dvidir ;;
+ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+ dvidir=$ac_optarg ;;
+
+ -enable-* | --enable-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid feature name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"enable_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval enable_$ac_useropt=\$ac_optarg ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix=$ac_optarg ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he | -h)
+ ac_init_help=long ;;
+ -help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
+ ac_init_help=recursive ;;
+ -help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
+ ac_init_help=short ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host_alias ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host_alias=$ac_optarg ;;
+
+ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+ ac_prev=htmldir ;;
+ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+ | --ht=*)
+ htmldir=$ac_optarg ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir=$ac_optarg ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir=$ac_optarg ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir=$ac_optarg ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir=$ac_optarg ;;
+
+ -localedir | --localedir | --localedi | --localed | --locale)
+ ac_prev=localedir ;;
+ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+ localedir=$ac_optarg ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst | --locals)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
+ localstatedir=$ac_optarg ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir=$ac_optarg ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c | -n)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir=$ac_optarg ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix=$ac_optarg ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix=$ac_optarg ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix=$ac_optarg ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name=$ac_optarg ;;
+
+ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+ ac_prev=pdfdir ;;
+ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+ pdfdir=$ac_optarg ;;
+
+ -psdir | --psdir | --psdi | --psd | --ps)
+ ac_prev=psdir ;;
+ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+ psdir=$ac_optarg ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir=$ac_optarg ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir=$ac_optarg ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site=$ac_optarg ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir=$ac_optarg ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir=$ac_optarg ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target_alias ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target_alias=$ac_optarg ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers | -V)
+ ac_init_version=: ;;
+
+ -with-* | --with-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=\$ac_optarg ;;
+
+ -without-* | --without-*)
+ ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'`
+ # Reject names that are not valid shell variable names.
+ expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null &&
+ as_fn_error $? "invalid package name: $ac_useropt"
+ ac_useropt_orig=$ac_useropt
+ ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'`
+ case $ac_user_opts in
+ *"
+"with_$ac_useropt"
+"*) ;;
+ *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig"
+ ac_unrecognized_sep=', ';;
+ esac
+ eval with_$ac_useropt=no ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes=$ac_optarg ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries=$ac_optarg ;;
+
+ -*) as_fn_error $? "unrecognized option: \`$ac_option'
+Try \`$0 --help' for more information"
+ ;;
+
+ *=*)
+ ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
+ # Reject names that are not valid shell variable names.
+ case $ac_envvar in #(
+ '' | [0-9]* | *[!_$as_cr_alnum]* )
+ as_fn_error $? "invalid variable name: \`$ac_envvar'" ;;
+ esac
+ eval $ac_envvar=\$ac_optarg
+ export $ac_envvar ;;
+
+ *)
+ # FIXME: should be removed in autoconf 3.0.
+ $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2
+ expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
+ $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2
+ : "${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ ac_option=--`echo $ac_prev | sed 's/_/-/g'`
+ as_fn_error $? "missing argument to $ac_option"
+fi
+
+if test -n "$ac_unrecognized_opts"; then
+ case $enable_option_checking in
+ no) ;;
+ fatal) as_fn_error $? "unrecognized options: $ac_unrecognized_opts" ;;
+ *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;;
+ esac
+fi
+
+# Check all directory arguments for consistency.
+for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
+ datadir sysconfdir sharedstatedir localstatedir includedir \
+ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+ libdir localedir mandir
+do
+ eval ac_val=\$$ac_var
+ # Remove trailing slashes.
+ case $ac_val in
+ */ )
+ ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'`
+ eval $ac_var=\$ac_val;;
+ esac
+ # Be sure to have absolute directory names.
+ case $ac_val in
+ [\\/$]* | ?:[\\/]* ) continue;;
+ NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
+ esac
+ as_fn_error $? "expected an absolute directory name for --$ac_var: $ac_val"
+done
+
+# There might be people who depend on the old broken behavior: `$host'
+# used to hold the argument of --host etc.
+# FIXME: To remove some day.
+build=$build_alias
+host=$host_alias
+target=$target_alias
+
+# FIXME: To remove some day.
+if test "x$host_alias" != x; then
+ if test "x$build_alias" = x; then
+ cross_compiling=maybe
+ elif test "x$build_alias" != "x$host_alias"; then
+ cross_compiling=yes
+ fi
+fi
+
+ac_tool_prefix=
+test -n "$host_alias" && ac_tool_prefix=$host_alias-
+
+test "$silent" = yes && exec 6>/dev/null
+
+
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+ as_fn_error $? "working directory cannot be determined"
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+ as_fn_error $? "pwd does not report name of working directory"
+
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then the parent directory.
+ ac_confdir=`$as_dirname -- "$as_myself" ||
+$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_myself" : 'X\(//\)[^/]' \| \
+ X"$as_myself" : 'X\(//\)$' \| \
+ X"$as_myself" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_myself" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ srcdir=$ac_confdir
+ if test ! -r "$srcdir/$ac_unique_file"; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r "$srcdir/$ac_unique_file"; then
+ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+ as_fn_error $? "cannot find sources ($ac_unique_file) in $srcdir"
+fi
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+ cd "$srcdir" && test -r "./$ac_unique_file" || as_fn_error $? "$ac_msg"
+ pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+ srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+ eval ac_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_env_${ac_var}_value=\$${ac_var}
+ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+ eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
+
+#
+# Report the --help message.
+#
+if test "$ac_init_help" = "long"; then
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat <<_ACEOF
+\`configure' configures libpng 1.6.35 to adapt to many kinds of systems.
+
+Usage: $0 [OPTION]... [VAR=VALUE]...
+
+To assign environment variables (e.g., CC, CFLAGS...), specify them as
+VAR=VALUE. See below for descriptions of some of the useful variables.
+
+Defaults for the options are specified in brackets.
+
+Configuration:
+ -h, --help display this help and exit
+ --help=short display options specific to this package
+ --help=recursive display the short help of all the included packages
+ -V, --version display version information and exit
+ -q, --quiet, --silent do not print \`checking ...' messages
+ --cache-file=FILE cache test results in FILE [disabled]
+ -C, --config-cache alias for \`--cache-file=config.cache'
+ -n, --no-create do not create output files
+ --srcdir=DIR find the sources in DIR [configure dir or \`..']
+
+Installation directories:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [PREFIX]
+
+By default, \`make install' will install all the files in
+\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
+an installation prefix other than \`$ac_default_prefix' using \`--prefix',
+for instance \`--prefix=\$HOME'.
+
+For better control, use the options below.
+
+Fine tuning of the installation directories:
+ --bindir=DIR user executables [EPREFIX/bin]
+ --sbindir=DIR system admin executables [EPREFIX/sbin]
+ --libexecdir=DIR program executables [EPREFIX/libexec]
+ --sysconfdir=DIR read-only single-machine data [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data [PREFIX/var]
+ --libdir=DIR object code libraries [EPREFIX/lib]
+ --includedir=DIR C header files [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc [/usr/include]
+ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
+ --datadir=DIR read-only architecture-independent data [DATAROOTDIR]
+ --infodir=DIR info documentation [DATAROOTDIR/info]
+ --localedir=DIR locale-dependent data [DATAROOTDIR/locale]
+ --mandir=DIR man documentation [DATAROOTDIR/man]
+ --docdir=DIR documentation root [DATAROOTDIR/doc/libpng]
+ --htmldir=DIR html documentation [DOCDIR]
+ --dvidir=DIR dvi documentation [DOCDIR]
+ --pdfdir=DIR pdf documentation [DOCDIR]
+ --psdir=DIR ps documentation [DOCDIR]
+_ACEOF
+
+ cat <<\_ACEOF
+
+Program names:
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM run sed PROGRAM on installed program names
+
+System types:
+ --build=BUILD configure for building on BUILD [guessed]
+ --host=HOST cross-compile to build programs to run on HOST [BUILD]
+_ACEOF
+fi
+
+if test -n "$ac_init_help"; then
+ case $ac_init_help in
+ short | recursive ) echo "Configuration of libpng 1.6.35:";;
+ esac
+ cat <<\_ACEOF
+
+Optional Features:
+ --disable-option-checking ignore unrecognized --enable/--with options
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --enable-silent-rules less verbose build output (undo: "make V=1")
+ --disable-silent-rules verbose build output (undo: "make V=0")
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful (and
+ sometimes confusing) to the casual installer
+ --enable-dependency-tracking
+ do not reject slow dependency extractors
+ --disable-dependency-tracking
+ speeds up one-time build
+ --enable-shared[=PKGS] build shared libraries [default=yes]
+ --enable-static[=PKGS] build static libraries [default=yes]
+ --enable-fast-install[=PKGS]
+ optimize for fast installation [default=yes]
+ --disable-libtool-lock avoid locking (might break parallel builds)
+ --enable-werror[=OPT] Pass -Werror or the given argument to the compiler
+ if it is supported
+ --enable-unversioned-links
+ Installed libpng header files are placed in a
+ versioned subdirectory and installed libpng library
+ (including DLL) files are versioned. If this option
+ is enabled unversioned links will be created
+ pointing to the corresponding installed files. If
+ you use libpng.pc or libpng-config for all builds
+ you do not need these links, but if you compile
+ programs directly they will typically #include
+ <png.h> and link with -lpng; in that case you need
+ the links. The links can be installed manually using
+ 'make install-header-links' and 'make
+ install-library-links' and can be removed using the
+ corresponding uninstall- targets. If you do enable
+ this option every libpng 'make install' will
+ recreate the links to point to the just installed
+ version of libpng. The default is to create the
+ links; use --disable-unversioned-links to change
+ this
+ --enable-unversioned-libpng-pc
+ Install the configuration file 'libpng.pc' as a link
+ to the versioned version. This is done by default -
+ use --disable-unversioned-libpng-pc to change this.
+ --enable-unversioned-libpng-config
+ Install the configuration file 'libpng-config' as a
+ link to the versioned version. This is done by
+ default - use --disable-unversioned-libpng-config to
+ change this.
+ --enable-hardware-optimizations
+ Enable hardware optimizations: =no/off, yes/on:
+ --enable-arm-neon Enable ARM NEON optimizations: =no/off, check, api,
+ yes/on: no/off: disable the optimizations; check:
+ use internal checking code (deprecated and poorly
+ supported); api: disable by default, enable by a
+ call to png_set_option; yes/on: turn on
+ unconditionally. If not specified: determined by the
+ compiler.
+ --enable-mips-msa Enable MIPS MSA optimizations: =no/off, check, api,
+ yes/on: no/off: disable the optimizations; check:
+ use internal checking code (deprecated and poorly
+ supported); api: disable by default, enable by a
+ call to png_set_option; yes/on: turn on
+ unconditionally. If not specified: determined by the
+ compiler.
+ --enable-intel-sse Enable Intel SSE optimizations: =no/off, yes/on:
+ no/off: disable the optimizations; yes/on: enable
+ the optimizations. If not specified: determined by
+ the compiler.
+ --enable-powerpc-vsx Enable POWERPC VSX optimizations: =no/off, check,
+ api, yes/on: no/off: disable the optimizations;
+ check: use internal checking code api: disable by
+ default, enable by a call to png_set_option yes/on:
+ turn on unconditionally. If not specified:
+ determined by the compiler.
+
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-gnu-ld assume the C compiler uses GNU ld [default=no]
+ --with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
+ both]
+ --with-aix-soname=aix|svr4|both
+ shared library versioning (aka "SONAME") variant to
+ provide on AIX, [default=aix].
+ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the
+ compiler's sysroot if not specified).
+ --with-zlib-prefix prefix that may have been used in installed zlib
+ --with-pkgconfigdir Use the specified pkgconfig dir (default is
+ libdir/pkgconfig)
+ --with-binconfigs Generate shell libpng-config scripts as well as
+ pkg-config data [default=yes]
+ --with-libpng-prefix prefix libpng exported function (API) names with the
+ given value
+
+Some influential environment variables:
+ CC C compiler command
+ CFLAGS C compiler flags
+ LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
+ nonstandard directory <lib dir>
+ LIBS libraries to pass to the linker, e.g. -l<library>
+ CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
+ you have headers in a nonstandard directory <include dir>
+ CCAS assembler compiler command (defaults to CC)
+ CCASFLAGS assembler compiler flags (defaults to CFLAGS)
+ CPP C preprocessor
+ LT_SYS_LIBRARY_PATH
+ User-defined run-time library search path.
+ PNG_COPTS additional flags for the C compiler, use this for options that
+ would cause configure itself to fail
+
+Use these variables to override the choices made by `configure' or to help
+it to find libraries and programs with nonstandard names/locations.
+
+Report bugs to <png-mng-implement@lists.sourceforge.net>.
+_ACEOF
+ac_status=$?
+fi
+
+if test "$ac_init_help" = "recursive"; then
+ # If there are subdirs, report their specific --help.
+ for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
+ test -d "$ac_dir" ||
+ { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } ||
+ continue
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+ cd "$ac_dir" || { ac_status=$?; continue; }
+ # Check for guested configure.
+ if test -f "$ac_srcdir/configure.gnu"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+ elif test -f "$ac_srcdir/configure"; then
+ echo &&
+ $SHELL "$ac_srcdir/configure" --help=recursive
+ else
+ $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
+ fi || ac_status=$?
+ cd "$ac_pwd" || { ac_status=$?; break; }
+ done
+fi
+
+test -n "$ac_init_help" && exit $ac_status
+if $ac_init_version; then
+ cat <<\_ACEOF
+libpng configure 1.6.35
+generated by GNU Autoconf 2.69
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This configure script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it.
+_ACEOF
+ exit
+fi
+
+## ------------------------ ##
+## Autoconf initialization. ##
+## ------------------------ ##
+
+# ac_fn_c_try_compile LINENO
+# --------------------------
+# Try to compile conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext
+ if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest.$ac_objext; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_compile
+
+# ac_fn_c_try_cpp LINENO
+# ----------------------
+# Try to preprocess conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_cpp ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } > conftest.i && {
+ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_cpp
+
+# ac_fn_c_try_link LINENO
+# -----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded.
+ac_fn_c_try_link ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ rm -f conftest.$ac_objext conftest$ac_exeext
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ grep -v '^ *+' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ mv -f conftest.er1 conftest.err
+ fi
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && {
+ test -z "$ac_c_werror_flag" ||
+ test ! -s conftest.err
+ } && test -s conftest$ac_exeext && {
+ test "$cross_compiling" = yes ||
+ test -x conftest$ac_exeext
+ }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=1
+fi
+ # Delete the IPA/IPO (Inter Procedural Analysis/Optimization) information
+ # created by the PGI compiler (conftest_ipa8_conftest.oo), as it would
+ # interfere with the next link command; also delete a directory that is
+ # left behind by Apple's compiler. We do this before executing the actions.
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_link
+
+# ac_fn_c_check_header_compile LINENO HEADER VAR INCLUDES
+# -------------------------------------------------------
+# Tests whether HEADER exists and can be compiled using the include files in
+# INCLUDES, setting the cache variable VAR accordingly.
+ac_fn_c_check_header_compile ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+#include <$2>
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_header_compile
+
+# ac_fn_c_try_run LINENO
+# ----------------------
+# Try to link conftest.$ac_ext, and return whether this succeeded. Assumes
+# that executables *can* be run.
+ac_fn_c_try_run ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && { ac_try='./conftest$ac_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then :
+ ac_retval=0
+else
+ $as_echo "$as_me: program exited with status $ac_status" >&5
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+ ac_retval=$ac_status
+fi
+ rm -rf conftest.dSYM conftest_ipa8_conftest.oo
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+ as_fn_set_status $ac_retval
+
+} # ac_fn_c_try_run
+
+# ac_fn_c_check_func LINENO FUNC VAR
+# ----------------------------------
+# Tests whether FUNC exists, setting the cache variable VAR accordingly
+ac_fn_c_check_func ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+/* Define $2 to an innocuous variant, in case <limits.h> declares $2.
+ For example, HP-UX 11i <limits.h> declares gettimeofday. */
+#define $2 innocuous_$2
+
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $2 (); below.
+ Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ <limits.h> exists even on freestanding compilers. */
+
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+
+#undef $2
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char $2 ();
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined __stub_$2 || defined __stub___$2
+choke me
+#endif
+
+int
+main ()
+{
+return $2 ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$3=yes"
+else
+ eval "$3=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_func
+
+# ac_fn_c_check_type LINENO TYPE VAR INCLUDES
+# -------------------------------------------
+# Tests whether TYPE exists after having included INCLUDES, setting cache
+# variable VAR accordingly.
+ac_fn_c_check_type ()
+{
+ as_lineno=${as_lineno-"$1"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for $2" >&5
+$as_echo_n "checking for $2... " >&6; }
+if eval \${$3+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ eval "$3=no"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof ($2))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+$4
+int
+main ()
+{
+if (sizeof (($2)))
+ return 0;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ eval "$3=yes"
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+eval ac_res=\$$3
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+ eval $as_lineno_stack; ${as_lineno_stack:+:} unset as_lineno
+
+} # ac_fn_c_check_type
+cat >config.log <<_ACEOF
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+
+It was created by libpng $as_me 1.6.35, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ $ $0 $@
+
+_ACEOF
+exec 5>>config.log
+{
+cat <<_ASUNAME
+## --------- ##
+## Platform. ##
+## --------- ##
+
+hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
+/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
+
+/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
+/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
+/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
+/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
+/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
+/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
+
+_ASUNAME
+
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ $as_echo "PATH: $as_dir"
+ done
+IFS=$as_save_IFS
+
+} >&5
+
+cat >&5 <<_ACEOF
+
+
+## ----------- ##
+## Core tests. ##
+## ----------- ##
+
+_ACEOF
+
+
+# Keep a trace of the command line.
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Strip out --silent because we don't want to record it for future runs.
+# Also quote any args containing shell meta-characters.
+# Make two passes to allow for proper duplicate-argument suppression.
+ac_configure_args=
+ac_configure_args0=
+ac_configure_args1=
+ac_must_keep_next=false
+for ac_pass in 1 2
+do
+ for ac_arg
+ do
+ case $ac_arg in
+ -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ continue ;;
+ *\'*)
+ ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ case $ac_pass in
+ 1) as_fn_append ac_configure_args0 " '$ac_arg'" ;;
+ 2)
+ as_fn_append ac_configure_args1 " '$ac_arg'"
+ if test $ac_must_keep_next = true; then
+ ac_must_keep_next=false # Got value, back to normal.
+ else
+ case $ac_arg in
+ *=* | --config-cache | -C | -disable-* | --disable-* \
+ | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
+ | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
+ | -with-* | --with-* | -without-* | --without-* | --x)
+ case "$ac_configure_args0 " in
+ "$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
+ esac
+ ;;
+ -* ) ac_must_keep_next=true ;;
+ esac
+ fi
+ as_fn_append ac_configure_args " '$ac_arg'"
+ ;;
+ esac
+ done
+done
+{ ac_configure_args0=; unset ac_configure_args0;}
+{ ac_configure_args1=; unset ac_configure_args1;}
+
+# When interrupted or exit'd, cleanup temporary files, and complete
+# config.log. We remove comments because anyway the quotes in there
+# would cause problems or look ugly.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
+trap 'exit_status=$?
+ # Save into config.log some information that might help in debugging.
+ {
+ echo
+
+ $as_echo "## ---------------- ##
+## Cache variables. ##
+## ---------------- ##"
+ echo
+ # The following way of writing the cache mishandles newlines in values,
+(
+ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+ (set) 2>&1 |
+ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ sed -n \
+ "s/'\''/'\''\\\\'\'''\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+ ;; #(
+ *)
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+)
+ echo
+
+ $as_echo "## ----------------- ##
+## Output variables. ##
+## ----------------- ##"
+ echo
+ for ac_var in $ac_subst_vars
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+
+ if test -n "$ac_subst_files"; then
+ $as_echo "## ------------------- ##
+## File substitutions. ##
+## ------------------- ##"
+ echo
+ for ac_var in $ac_subst_files
+ do
+ eval ac_val=\$$ac_var
+ case $ac_val in
+ *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+ esac
+ $as_echo "$ac_var='\''$ac_val'\''"
+ done | sort
+ echo
+ fi
+
+ if test -s confdefs.h; then
+ $as_echo "## ----------- ##
+## confdefs.h. ##
+## ----------- ##"
+ echo
+ cat confdefs.h
+ echo
+ fi
+ test "$ac_signal" != 0 &&
+ $as_echo "$as_me: caught signal $ac_signal"
+ $as_echo "$as_me: exit $exit_status"
+ } >&5
+ rm -f core *.core core.conftest.* &&
+ rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
+ exit $exit_status
+' 0
+for ac_signal in 1 2 13 15; do
+ trap 'ac_signal='$ac_signal'; as_fn_exit 1' $ac_signal
+done
+ac_signal=0
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -f -r conftest* confdefs.h
+
+$as_echo "/* confdefs.h */" > confdefs.h
+
+# Predefined preprocessor variables.
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_NAME "$PACKAGE_NAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_VERSION "$PACKAGE_VERSION"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_STRING "$PACKAGE_STRING"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
+_ACEOF
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE_URL "$PACKAGE_URL"
+_ACEOF
+
+
+# Let the site file select an alternate cache file if it wants to.
+# Prefer an explicitly selected file to automatically selected ones.
+ac_site_file1=NONE
+ac_site_file2=NONE
+if test -n "$CONFIG_SITE"; then
+ # We do not want a PATH search for config.site.
+ case $CONFIG_SITE in #((
+ -*) ac_site_file1=./$CONFIG_SITE;;
+ */*) ac_site_file1=$CONFIG_SITE;;
+ *) ac_site_file1=./$CONFIG_SITE;;
+ esac
+elif test "x$prefix" != xNONE; then
+ ac_site_file1=$prefix/share/config.site
+ ac_site_file2=$prefix/etc/config.site
+else
+ ac_site_file1=$ac_default_prefix/share/config.site
+ ac_site_file2=$ac_default_prefix/etc/config.site
+fi
+for ac_site_file in "$ac_site_file1" "$ac_site_file2"
+do
+ test "x$ac_site_file" = xNONE && continue
+ if test /dev/null != "$ac_site_file" && test -r "$ac_site_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading site script $ac_site_file" >&5
+$as_echo "$as_me: loading site script $ac_site_file" >&6;}
+ sed 's/^/| /' "$ac_site_file" >&5
+ . "$ac_site_file" \
+ || { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "failed to load site script $ac_site_file
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+done
+
+if test -r "$cache_file"; then
+ # Some versions of bash will fail to source /dev/null (special files
+ # actually), so we avoid doing that. DJGPP emulates it as a regular file.
+ if test /dev/null != "$cache_file" && test -f "$cache_file"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: loading cache $cache_file" >&5
+$as_echo "$as_me: loading cache $cache_file" >&6;}
+ case $cache_file in
+ [\\/]* | ?:[\\/]* ) . "$cache_file";;
+ *) . "./$cache_file";;
+ esac
+ fi
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating cache $cache_file" >&5
+$as_echo "$as_me: creating cache $cache_file" >&6;}
+ >$cache_file
+fi
+
+# Check that the precious variables saved in the cache have kept the same
+# value.
+ac_cache_corrupted=false
+for ac_var in $ac_precious_vars; do
+ eval ac_old_set=\$ac_cv_env_${ac_var}_set
+ eval ac_new_set=\$ac_env_${ac_var}_set
+ eval ac_old_val=\$ac_cv_env_${ac_var}_value
+ eval ac_new_val=\$ac_env_${ac_var}_value
+ case $ac_old_set,$ac_new_set in
+ set,)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,set)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' was not set in the previous run" >&5
+$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
+ ac_cache_corrupted=: ;;
+ ,);;
+ *)
+ if test "x$ac_old_val" != "x$ac_new_val"; then
+ # differences in whitespace do not lead to failure.
+ ac_old_val_w=`echo x $ac_old_val`
+ ac_new_val_w=`echo x $ac_new_val`
+ if test "$ac_old_val_w" != "$ac_new_val_w"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: \`$ac_var' has changed since the previous run:" >&5
+$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
+ ac_cache_corrupted=:
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5
+$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;}
+ eval $ac_var=\$ac_old_val
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: former value: \`$ac_old_val'" >&5
+$as_echo "$as_me: former value: \`$ac_old_val'" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: current value: \`$ac_new_val'" >&5
+$as_echo "$as_me: current value: \`$ac_new_val'" >&2;}
+ fi;;
+ esac
+ # Pass precious variables to config.status.
+ if test "$ac_new_set" = set; then
+ case $ac_new_val in
+ *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+ *) ac_arg=$ac_var=$ac_new_val ;;
+ esac
+ case " $ac_configure_args " in
+ *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
+ *) as_fn_append ac_configure_args " '$ac_arg'" ;;
+ esac
+ fi
+done
+if $ac_cache_corrupted; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+ { $as_echo "$as_me:${as_lineno-$LINENO}: error: changes in the environment can compromise the build" >&5
+$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;}
+ as_fn_error $? "run \`make distclean' and/or \`rm $cache_file' and start over" "$LINENO" 5
+fi
+## -------------------- ##
+## Main body of script. ##
+## -------------------- ##
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+
+
+# libpng does not follow GNU file name conventions (hence 'foreign')
+# color-tests requires automake 1.11 or later
+# silent-rules requires automake 1.11 or later
+# dist-xz requires automake 1.11 or later
+# 1.12.2 fixes a security issue in 1.11.2 and 1.12.1
+# 1.13 is required for parallel tests
+am__api_version='1.16'
+
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AmigaOS /C/install, which installs bootblocks on floppy discs
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# OS/2's system install, which has a completely different semantic
+# ./install, which can be erroneously created by make from ./install.sh.
+# Reject install programs that cannot install multiple files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a BSD-compatible install" >&5
+$as_echo_n "checking for a BSD-compatible install... " >&6; }
+if test -z "$INSTALL"; then
+if ${ac_cv_path_install+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ # Account for people who put trailing slashes in PATH elements.
+case $as_dir/ in #((
+ ./ | .// | /[cC]/* | \
+ /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
+ ?:[\\/]os2[\\/]install[\\/]* | ?:[\\/]OS2[\\/]INSTALL[\\/]* | \
+ /usr/ucb/* ) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+ if test $ac_prog = install &&
+ grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ elif test $ac_prog = install &&
+ grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
+ # program-specific install script used by HP pwplus--don't use.
+ :
+ else
+ rm -rf conftest.one conftest.two conftest.dir
+ echo one > conftest.one
+ echo two > conftest.two
+ mkdir conftest.dir
+ if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" &&
+ test -s conftest.one && test -s conftest.two &&
+ test -s conftest.dir/conftest.one &&
+ test -s conftest.dir/conftest.two
+ then
+ ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
+ break 3
+ fi
+ fi
+ fi
+ done
+ done
+ ;;
+esac
+
+ done
+IFS=$as_save_IFS
+
+rm -rf conftest.one conftest.two conftest.dir
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL=$ac_cv_path_install
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ INSTALL=$ac_install_sh
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $INSTALL" >&5
+$as_echo "$INSTALL" >&6; }
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
+$as_echo_n "checking whether build environment is sane... " >&6; }
+# Reject unsafe characters in $srcdir or the absolute working directory
+# name. Accept space and tab only in the latter.
+am_lf='
+'
+case `pwd` in
+ *[\\\"\#\$\&\'\`$am_lf]*)
+ as_fn_error $? "unsafe absolute working directory name" "$LINENO" 5;;
+esac
+case $srcdir in
+ *[\\\"\#\$\&\'\`$am_lf\ \ ]*)
+ as_fn_error $? "unsafe srcdir value: '$srcdir'" "$LINENO" 5;;
+esac
+
+# Do 'set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ am_has_slept=no
+ for am_try in 1 2; do
+ echo "timestamp, slept: $am_has_slept" > conftest.file
+ set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t "$srcdir/configure" conftest.file`
+ fi
+ if test "$*" != "X $srcdir/configure conftest.file" \
+ && test "$*" != "X conftest.file $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ as_fn_error $? "ls -t appears to fail. Make sure there is not a broken
+ alias in your environment" "$LINENO" 5
+ fi
+ if test "$2" = conftest.file || test $am_try -eq 2; then
+ break
+ fi
+ # Just in case.
+ sleep 1
+ am_has_slept=yes
+ done
+ test "$2" = conftest.file
+ )
+then
+ # Ok.
+ :
+else
+ as_fn_error $? "newly created file is older than distributed files!
+Check your system clock" "$LINENO" 5
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+# If we didn't sleep, we still need to ensure time stamps of config.status and
+# generated files are strictly newer.
+am_sleep_pid=
+if grep 'slept: no' conftest.file >/dev/null 2>&1; then
+ ( sleep 1 ) &
+ am_sleep_pid=$!
+fi
+
+rm -f conftest.file
+
+test "$program_prefix" != NONE &&
+ program_transform_name="s&^&$program_prefix&;$program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s&\$&$program_suffix&;$program_transform_name"
+# Double any \ or $.
+# By default was `s,x,x', remove it if useless.
+ac_script='s/[\\$]/&&/g;s/;s,x,x,$//'
+program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"`
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
+
+if test x"${MISSING+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
+ *)
+ MISSING="\${SHELL} $am_aux_dir/missing" ;;
+ esac
+fi
+# Use eval to expand $SHELL
+if eval "$MISSING --is-lightweight"; then
+ am_missing_run="$MISSING "
+else
+ am_missing_run=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: 'missing' script is too old or missing" >&5
+$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
+fi
+
+if test x"${install_sh+set}" != xset; then
+ case $am_aux_dir in
+ *\ * | *\ *)
+ install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
+ *)
+ install_sh="\${SHELL} $am_aux_dir/install-sh"
+ esac
+fi
+
+# Installed binaries are usually stripped using 'strip' when the user
+# run "make install-strip". However 'strip' might not be the right
+# tool to use in cross-compilation environments, therefore Automake
+# will honor the 'STRIP' environment variable to overrule this program.
+if test "$cross_compiling" != no; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+fi
+INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a thread-safe mkdir -p" >&5
+$as_echo_n "checking for a thread-safe mkdir -p... " >&6; }
+if test -z "$MKDIR_P"; then
+ if ${ac_cv_path_mkdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in mkdir gmkdir; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ as_fn_executable_p "$as_dir/$ac_prog$ac_exec_ext" || continue
+ case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #(
+ 'mkdir (GNU coreutils) '* | \
+ 'mkdir (coreutils) '* | \
+ 'mkdir (fileutils) '4.1*)
+ ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext
+ break 3;;
+ esac
+ done
+ done
+ done
+IFS=$as_save_IFS
+
+fi
+
+ test -d ./--version && rmdir ./--version
+ if test "${ac_cv_path_mkdir+set}" = set; then
+ MKDIR_P="$ac_cv_path_mkdir -p"
+ else
+ # As a last resort, use the slow shell script. Don't cache a
+ # value for MKDIR_P within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the value is a relative name.
+ MKDIR_P="$ac_install_sh -d"
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MKDIR_P" >&5
+$as_echo "$MKDIR_P" >&6; }
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+rm -rf .tst 2>/dev/null
+mkdir .tst 2>/dev/null
+if test -d .tst; then
+ am__leading_dot=.
+else
+ am__leading_dot=_
+fi
+rmdir .tst 2>/dev/null
+
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=1;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
+if test "`cd $srcdir && pwd`" != "`pwd`"; then
+ # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
+ # is not polluted with repeated "-I."
+ am__isrc=' -I$(srcdir)'
+ # test to see if srcdir already configured
+ if test -f $srcdir/config.status; then
+ as_fn_error $? "source directory already configured; run \"make distclean\" there first" "$LINENO" 5
+ fi
+fi
+
+# test whether we have cygpath
+if test -z "$CYGPATH_W"; then
+ if (cygpath --version) >/dev/null 2>/dev/null; then
+ CYGPATH_W='cygpath -w'
+ else
+ CYGPATH_W=echo
+ fi
+fi
+
+
+# Define the identity of the package.
+ PACKAGE='libpng'
+ VERSION='1.6.35'
+
+
+cat >>confdefs.h <<_ACEOF
+#define PACKAGE "$PACKAGE"
+_ACEOF
+
+
+cat >>confdefs.h <<_ACEOF
+#define VERSION "$VERSION"
+_ACEOF
+
+# Some tools Automake needs.
+
+ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
+
+
+AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
+
+
+AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
+
+
+AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
+
+
+MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
+
+# For better backward compatibility. To be removed once Automake 1.9.x
+# dies out for good. For more background, see:
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+mkdir_p='$(MKDIR_P)'
+
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
+# Always define AMTAR for backward compatibility. Yes, it's still used
+# in the wild :-( We should find a proper way to deprecate it ...
+AMTAR='$${TAR-tar}'
+
+
+# We'll loop over all known methods to create a tar archive until one works.
+_am_tools='gnutar pax cpio none'
+
+am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'
+
+
+
+
+
+
+# POSIX will say in a future version that running "rm -f" with no argument
+# is OK; and we want to be able to make that assumption in our Makefile
+# recipes. So use an aggressive probe to check that the usage we want is
+# actually supported "in the wild" to an acceptable degree.
+# See automake bug#10828.
+# To make any issue more visible, cause the running configure to be aborted
+# by default if the 'rm' program in use doesn't match our expectations; the
+# user can still override this though.
+if rm -f && rm -fr && rm -rf; then : OK; else
+ cat >&2 <<'END'
+Oops!
+
+Your 'rm' program seems unable to run without file operands specified
+on the command line, even when the '-f' option is present. This is contrary
+to the behaviour of most rm programs out there, and not conforming with
+the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
+
+Please tell bug-automake@gnu.org about your system, including the value
+of your $PATH and any error possibly output before this message. This
+can help us improve future automake versions.
+
+END
+ if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
+ echo 'Configuration will proceed anyway, since you have set the' >&2
+ echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
+ echo >&2
+ else
+ cat >&2 <<'END'
+Aborting the configuration process, to ensure you take notice of the issue.
+
+You can download and install GNU coreutils to get an 'rm' implementation
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
+
+If you want to complete the configuration process using your problematic
+'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
+to "yes", and re-run configure.
+
+END
+ as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
+ fi
+fi
+
+# The following line causes --disable-maintainer-mode to be the default to
+# configure. This is necessary because libpng distributions cannot rely on the
+# time stamps of the autotools generated files being correct
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then :
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+
+PNGLIB_VERSION=1.6.35
+PNGLIB_MAJOR=1
+PNGLIB_MINOR=6
+PNGLIB_RELEASE=35
+
+
+
+ac_config_headers="$ac_config_headers config.h"
+
+
+# Checks for programs.
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_CC"; then
+ ac_ct_CC=$CC
+ # Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="gcc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+else
+ CC="$ac_cv_prog_CC"
+fi
+
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+set dummy ${ac_tool_prefix}cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="${ac_tool_prefix}cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ fi
+fi
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ ac_prog_rejected=no
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# != 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
+ fi
+fi
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$CC"; then
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in cl.exe
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+CC=$ac_cv_prog_CC
+if test -n "$CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $CC" >&5
+$as_echo "$CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$CC" && break
+ done
+fi
+if test -z "$CC"; then
+ ac_ct_CC=$CC
+ for ac_prog in cl.exe
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_CC+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_CC"; then
+ ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_CC="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_CC=$ac_cv_prog_ac_ct_CC
+if test -n "$ac_ct_CC"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_CC" >&5
+$as_echo "$ac_ct_CC" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_CC" && break
+done
+
+ if test "x$ac_ct_CC" = x; then
+ CC=""
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ CC=$ac_ct_CC
+ fi
+fi
+
+fi
+
+
+test -z "$CC" && { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "no acceptable C compiler found in \$PATH
+See \`config.log' for more details" "$LINENO" 5; }
+
+# Provide some information about the compiler.
+$as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler version" >&5
+set X $ac_compile
+ac_compiler=$2
+for ac_option in --version -v -V -qversion; do
+ { { ac_try="$ac_compiler $ac_option >&5"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compiler $ac_option >&5") 2>conftest.err
+ ac_status=$?
+ if test -s conftest.err; then
+ sed '10a\
+... rest of stderr output deleted ...
+ 10q' conftest.err >conftest.er1
+ cat conftest.er1 >&5
+ fi
+ rm -f conftest.er1 conftest.err
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+done
+
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out"
+# Try to create an executable without -o first, disregard a.out.
+# It will help us diagnose broken compilers, and finding out an intuition
+# of exeext.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler works" >&5
+$as_echo_n "checking whether the C compiler works... " >&6; }
+ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
+
+# The possible output files:
+ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*"
+
+ac_rmfiles=
+for ac_file in $ac_files
+do
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+ esac
+done
+rm -f $ac_rmfiles
+
+if { { ac_try="$ac_link_default"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link_default") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile. We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files ''
+do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj )
+ ;;
+ [ab].out )
+ # We found the default executable, but exeext='' is most
+ # certainly right.
+ break;;
+ *.* )
+ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+ then :; else
+ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ fi
+ # We set ac_cv_exeext here because the later test for it is not
+ # safe: cross compilers may not add the suffix if given an `-o'
+ # argument, so we may need to know it at that point already.
+ # Even if this section looks crufty: it has the advantage of
+ # actually working.
+ break;;
+ * )
+ break;;
+ esac
+done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
+else
+ ac_file=''
+fi
+if test -z "$ac_file"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+$as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 77 "C compiler cannot create executables
+See \`config.log' for more details" "$LINENO" 5; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C compiler default output file name" >&5
+$as_echo_n "checking for C compiler default output file name... " >&6; }
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_file" >&5
+$as_echo "$ac_file" >&6; }
+ac_exeext=$ac_cv_exeext
+
+rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of executables" >&5
+$as_echo_n "checking for suffix of executables... " >&6; }
+if { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ # If both `conftest.exe' and `conftest' are `present' (well, observable)
+# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
+# work properly (i.e., refer to `conftest.exe'), while it won't with
+# `rm'.
+for ac_file in conftest.exe conftest conftest.*; do
+ test -f "$ac_file" || continue
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;;
+ *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+ break;;
+ * ) break;;
+ esac
+done
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of executables: cannot compile and link
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest conftest$ac_cv_exeext
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_exeext" >&5
+$as_echo "$ac_cv_exeext" >&6; }
+
+rm -f conftest.$ac_ext
+EXEEXT=$ac_cv_exeext
+ac_exeext=$EXEEXT
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdio.h>
+int
+main ()
+{
+FILE *f = fopen ("conftest.out", "w");
+ return ferror (f) || fclose (f) != 0;
+
+ ;
+ return 0;
+}
+_ACEOF
+ac_clean_files="$ac_clean_files conftest.out"
+# Check that the compiler produces executables we can run. If not, either
+# the compiler is broken, or we cross compile.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are cross compiling" >&5
+$as_echo_n "checking whether we are cross compiling... " >&6; }
+if test "$cross_compiling" != yes; then
+ { { ac_try="$ac_link"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_link") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if { ac_try='./conftest$ac_cv_exeext'
+ { { case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_try") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; }; then
+ cross_compiling=no
+ else
+ if test "$cross_compiling" = maybe; then
+ cross_compiling=yes
+ else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot run C compiled programs.
+If you meant to cross compile, use \`--host'.
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $cross_compiling" >&5
+$as_echo "$cross_compiling" >&6; }
+
+rm -f conftest.$ac_ext conftest$ac_cv_exeext conftest.out
+ac_clean_files=$ac_clean_files_save
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for suffix of object files" >&5
+$as_echo_n "checking for suffix of object files... " >&6; }
+if ${ac_cv_objext+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+rm -f conftest.o conftest.obj
+if { { ac_try="$ac_compile"
+case "(($ac_try" in
+ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+ *) ac_try_echo=$ac_try;;
+esac
+eval ac_try_echo="\"\$as_me:${as_lineno-$LINENO}: $ac_try_echo\""
+$as_echo "$ac_try_echo"; } >&5
+ (eval "$ac_compile") 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then :
+ for ac_file in conftest.o conftest.obj conftest.*; do
+ test -f "$ac_file" || continue;
+ case $ac_file in
+ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;;
+ *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
+ break;;
+ esac
+done
+else
+ $as_echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+{ { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "cannot compute suffix of object files: cannot compile
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+rm -f conftest.$ac_cv_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_objext" >&5
+$as_echo "$ac_cv_objext" >&6; }
+OBJEXT=$ac_cv_objext
+ac_objext=$OBJEXT
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether we are using the GNU C compiler" >&5
+$as_echo_n "checking whether we are using the GNU C compiler... " >&6; }
+if ${ac_cv_c_compiler_gnu+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+#ifndef __GNUC__
+ choke me
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_compiler_gnu=yes
+else
+ ac_compiler_gnu=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ac_cv_c_compiler_gnu=$ac_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_compiler_gnu" >&5
+$as_echo "$ac_cv_c_compiler_gnu" >&6; }
+if test $ac_compiler_gnu = yes; then
+ GCC=yes
+else
+ GCC=
+fi
+ac_test_CFLAGS=${CFLAGS+set}
+ac_save_CFLAGS=$CFLAGS
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC accepts -g" >&5
+$as_echo_n "checking whether $CC accepts -g... " >&6; }
+if ${ac_cv_prog_cc_g+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_save_c_werror_flag=$ac_c_werror_flag
+ ac_c_werror_flag=yes
+ ac_cv_prog_cc_g=no
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+else
+ CFLAGS=""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+
+else
+ ac_c_werror_flag=$ac_save_c_werror_flag
+ CFLAGS="-g"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_g=yes
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ ac_c_werror_flag=$ac_save_c_werror_flag
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_g" >&5
+$as_echo "$ac_cv_prog_cc_g" >&6; }
+if test "$ac_test_CFLAGS" = set; then
+ CFLAGS=$ac_save_CFLAGS
+elif test $ac_cv_prog_cc_g = yes; then
+ if test "$GCC" = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-g"
+ fi
+else
+ if test "$GCC" = yes; then
+ CFLAGS="-O2"
+ else
+ CFLAGS=
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $CC option to accept ISO C89" >&5
+$as_echo_n "checking for $CC option to accept ISO C89... " >&6; }
+if ${ac_cv_prog_cc_c89+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_prog_cc_c89=no
+ac_save_CC=$CC
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdarg.h>
+#include <stdio.h>
+struct stat;
+/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
+struct buf { int x; };
+FILE * (*rcsopen) (struct buf *, struct stat *, int);
+static char *e (p, i)
+ char **p;
+ int i;
+{
+ return p[i];
+}
+static char *f (char * (*g) (char **, int), char **p, ...)
+{
+ char *s;
+ va_list v;
+ va_start (v,p);
+ s = g (p, va_arg (v,int));
+ va_end (v);
+ return s;
+}
+
+/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
+ function prototypes and stuff, but not '\xHH' hex character constants.
+ These don't provoke an error unfortunately, instead are silently treated
+ as 'x'. The following induces an error, until -std is added to get
+ proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
+ array size at least. It's necessary to write '\x00'==0 to get something
+ that's true only with -std. */
+int osf4_cc_array ['\x00' == 0 ? 1 : -1];
+
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+ inside strings and character constants. */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
+int test (int i, double x);
+struct s1 {int (*f) (int a);};
+struct s2 {int (*f) (double a);};
+int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
+int argc;
+char **argv;
+int
+main ()
+{
+return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
+ ;
+ return 0;
+}
+_ACEOF
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+do
+ CC="$ac_save_CC $ac_arg"
+ if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_prog_cc_c89=$ac_arg
+fi
+rm -f core conftest.err conftest.$ac_objext
+ test "x$ac_cv_prog_cc_c89" != "xno" && break
+done
+rm -f conftest.$ac_ext
+CC=$ac_save_CC
+
+fi
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+ x)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none needed" >&5
+$as_echo "none needed" >&6; } ;;
+ xno)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: unsupported" >&5
+$as_echo "unsupported" >&6; } ;;
+ *)
+ CC="$CC $ac_cv_prog_cc_c89"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_prog_cc_c89" >&5
+$as_echo "$ac_cv_prog_cc_c89" >&6; } ;;
+esac
+if test "x$ac_cv_prog_cc_c89" != xno; then :
+
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC understands -c and -o together" >&5
+$as_echo_n "checking whether $CC understands -c and -o together... " >&6; }
+if ${am_cv_prog_cc_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+ # Make sure it works both with $CC and with simple cc.
+ # Following AC_PROG_CC_C_O, we do the test twice because some
+ # compilers refuse to overwrite an existing .o file with -o,
+ # though they will create one.
+ am_cv_prog_cc_c_o=yes
+ for am_i in 1 2; do
+ if { echo "$as_me:$LINENO: $CC -c conftest.$ac_ext -o conftest2.$ac_objext" >&5
+ ($CC -c conftest.$ac_ext -o conftest2.$ac_objext) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } \
+ && test -f conftest2.$ac_objext; then
+ : OK
+ else
+ am_cv_prog_cc_c_o=no
+ break
+ fi
+ done
+ rm -f core conftest*
+ unset am_i
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_prog_cc_c_o" >&5
+$as_echo "$am_cv_prog_cc_c_o" >&6; }
+if test "$am_cv_prog_cc_c_o" != yes; then
+ # Losing compiler, so override with the script.
+ # FIXME: It is wrong to rewrite CC.
+ # But if we don't then we get into trouble of one sort or another.
+ # A longer-term fix would be to have automake use am__CC in this case,
+ # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)"
+ CC="$am_aux_dir/compile $CC"
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+DEPDIR="${am__leading_dot}deps"
+
+ac_config_commands="$ac_config_commands depfiles"
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
+$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
+cat > confinc.mk << 'END'
+am__doit:
+ @echo this is the am__doit target >confinc.out
+.PHONY: am__doit
+END
+am__include="#"
+am__quote=
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+ { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
+ (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ case $?:`cat confinc.out 2>/dev/null` in #(
+ '0:this is the am__doit target') :
+ case $s in #(
+ BSD) :
+ am__include='.include' am__quote='"' ;; #(
+ *) :
+ am__include='include' am__quote='' ;;
+esac ;; #(
+ *) :
+ ;;
+esac
+ if test "$am__include" != "#"; then
+ _am_result="yes ($s style)"
+ break
+ fi
+done
+rm -f confinc.* confmf.*
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
+$as_echo "${_am_result}" >&6; }
+
+# Check whether --enable-dependency-tracking was given.
+if test "${enable_dependency_tracking+set}" = set; then :
+ enableval=$enable_dependency_tracking;
+fi
+
+if test "x$enable_dependency_tracking" != xno; then
+ am_depcomp="$ac_aux_dir/depcomp"
+ AMDEPBACKSLASH='\'
+ am__nodep='_no'
+fi
+ if test "x$enable_dependency_tracking" != xno; then
+ AMDEP_TRUE=
+ AMDEP_FALSE='#'
+else
+ AMDEP_TRUE='#'
+ AMDEP_FALSE=
+fi
+
+
+
+depcc="$CC" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CC_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CC_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+ case " $depcc " in #(
+ *\ -arch\ *\ -arch\ *) am__universal=true ;;
+ esac
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CC_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CC_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CC_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; }
+CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
+ am__fastdepCC_TRUE=
+ am__fastdepCC_FALSE='#'
+else
+ am__fastdepCC_TRUE='#'
+ am__fastdepCC_FALSE=
+fi
+
+
+# By default we simply use the C compiler to build assembly code.
+
+test "${CCAS+set}" = set || CCAS=$CC
+test "${CCASFLAGS+set}" = set || CCASFLAGS=$CFLAGS
+
+
+
+depcc="$CCAS" am_compiler_list=
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dependency style of $depcc" >&5
+$as_echo_n "checking dependency style of $depcc... " >&6; }
+if ${am_cv_CCAS_dependencies_compiler_type+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+ # We make a subdir and do the tests there. Otherwise we can end up
+ # making bogus files that we don't know about and never remove. For
+ # instance it was reported that on HP-UX the gcc test will end up
+ # making a dummy file named 'D' -- because '-MD' means "put the output
+ # in D".
+ rm -rf conftest.dir
+ mkdir conftest.dir
+ # Copy depcomp to subdir because otherwise we won't find it if we're
+ # using a relative directory.
+ cp "$am_depcomp" conftest.dir
+ cd conftest.dir
+ # We will build objects and dependencies in a subdirectory because
+ # it helps to detect inapplicable dependency modes. For instance
+ # both Tru64's cc and ICC support -MD to output dependencies as a
+ # side effect of compilation, but ICC will put the dependencies in
+ # the current directory while Tru64 will put them in the object
+ # directory.
+ mkdir sub
+
+ am_cv_CCAS_dependencies_compiler_type=none
+ if test "$am_compiler_list" = ""; then
+ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
+ fi
+ am__universal=false
+
+
+ for depmode in $am_compiler_list; do
+ # Setup a source with many dependencies, because some compilers
+ # like to wrap large dependency lists on column 80 (with \), and
+ # we should not choose a depcomp mode which is confused by this.
+ #
+ # We need to recreate these files for each test, as the compiler may
+ # overwrite some of them when testing with obscure command lines.
+ # This happens at least with the AIX C compiler.
+ : > sub/conftest.c
+ for i in 1 2 3 4 5 6; do
+ echo '#include "conftst'$i'.h"' >> sub/conftest.c
+ # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
+ # Solaris 10 /bin/sh.
+ echo '/* dummy */' > sub/conftst$i.h
+ done
+ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
+
+ # We check with '-c' and '-o' for the sake of the "dashmstdout"
+ # mode. It turns out that the SunPro C++ compiler does not properly
+ # handle '-M -o', and we need to detect this. Also, some Intel
+ # versions had trouble with output in subdirs.
+ am__obj=sub/conftest.${OBJEXT-o}
+ am__minus_obj="-o $am__obj"
+ case $depmode in
+ gcc)
+ # This depmode causes a compiler race in universal mode.
+ test "$am__universal" = false || continue
+ ;;
+ nosideeffect)
+ # After this tag, mechanisms are not by side-effect, so they'll
+ # only be used when explicitly requested.
+ if test "x$enable_dependency_tracking" = xyes; then
+ continue
+ else
+ break
+ fi
+ ;;
+ msvc7 | msvc7msys | msvisualcpp | msvcmsys)
+ # This compiler won't grok '-c -o', but also, the minuso test has
+ # not run yet. These depmodes are late enough in the game, and
+ # so weak that their functioning should not be impacted.
+ am__obj=conftest.${OBJEXT-o}
+ am__minus_obj=
+ ;;
+ none) break ;;
+ esac
+ if depmode=$depmode \
+ source=sub/conftest.c object=$am__obj \
+ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
+ $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
+ >/dev/null 2>conftest.err &&
+ grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
+ grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
+ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
+ # icc doesn't choke on unknown options, it will just issue warnings
+ # or remarks (even with -Werror). So we grep stderr for any message
+ # that says an option was ignored or not supported.
+ # When given -MP, icc 7.0 and 7.1 complain thusly:
+ # icc: Command line warning: ignoring option '-M'; no argument required
+ # The diagnosis changed in icc 8.0:
+ # icc: Command line remark: option '-MP' not supported
+ if (grep 'ignoring option' conftest.err ||
+ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
+ am_cv_CCAS_dependencies_compiler_type=$depmode
+ break
+ fi
+ fi
+ done
+
+ cd ..
+ rm -rf conftest.dir
+else
+ am_cv_CCAS_dependencies_compiler_type=none
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_CCAS_dependencies_compiler_type" >&5
+$as_echo "$am_cv_CCAS_dependencies_compiler_type" >&6; }
+CCASDEPMODE=depmode=$am_cv_CCAS_dependencies_compiler_type
+
+ if
+ test "x$enable_dependency_tracking" != xno \
+ && test "$am_cv_CCAS_dependencies_compiler_type" = gcc3; then
+ am__fastdepCCAS_TRUE=
+ am__fastdepCCAS_FALSE='#'
+else
+ am__fastdepCCAS_TRUE='#'
+ am__fastdepCCAS_FALSE=
+fi
+
+
+# Make sure we can run config.sub.
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+ as_fn_error $? "cannot run $SHELL $ac_aux_dir/config.sub" "$LINENO" 5
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking build system type" >&5
+$as_echo_n "checking build system type... " >&6; }
+if ${ac_cv_build+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
+ as_fn_error $? "cannot guess build type; you must specify one" "$LINENO" 5
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $ac_build_alias failed" "$LINENO" 5
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_build" >&5
+$as_echo "$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical build" "$LINENO" 5;;
+esac
+build=$ac_cv_build
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking host system type" >&5
+$as_echo_n "checking host system type... " >&6; }
+if ${ac_cv_host+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "x$host_alias" = x; then
+ ac_cv_host=$ac_cv_build
+else
+ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+ as_fn_error $? "$SHELL $ac_aux_dir/config.sub $host_alias failed" "$LINENO" 5
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_host" >&5
+$as_echo "$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) as_fn_error $? "invalid value of canonical host" "$LINENO" 5;;
+esac
+host=$ac_cv_host
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5
+$as_echo_n "checking for a sed that does not truncate output... " >&6; }
+if ${ac_cv_path_SED+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for ac_i in 1 2 3 4 5 6 7; do
+ ac_script="$ac_script$as_nl$ac_script"
+ done
+ echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed
+ { ac_script=; unset ac_script;}
+ if test -z "$SED"; then
+ ac_path_SED_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_SED="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_SED" || continue
+# Check for GNU ac_path_SED and select it if it is found.
+ # Check for GNU $ac_path_SED
+case `"$ac_path_SED" --version 2>&1` in
+*GNU*)
+ ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo '' >> "conftest.nl"
+ "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_SED_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_SED="$ac_path_SED"
+ ac_path_SED_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_SED_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_SED"; then
+ as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5
+ fi
+else
+ ac_cv_path_SED=$SED
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5
+$as_echo "$ac_cv_path_SED" >&6; }
+ SED="$ac_cv_path_SED"
+ rm -f conftest.sed
+
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for grep that handles long lines and -e" >&5
+$as_echo_n "checking for grep that handles long lines and -e... " >&6; }
+if ${ac_cv_path_GREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$GREP"; then
+ ac_path_GREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in grep ggrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_GREP" || continue
+# Check for GNU ac_path_GREP and select it if it is found.
+ # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'GREP' >> "conftest.nl"
+ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_GREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_GREP="$ac_path_GREP"
+ ac_path_GREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_GREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_GREP"; then
+ as_fn_error $? "no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_GREP=$GREP
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_GREP" >&5
+$as_echo "$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for egrep" >&5
+$as_echo_n "checking for egrep... " >&6; }
+if ${ac_cv_path_EGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+ then ac_cv_path_EGREP="$GREP -E"
+ else
+ if test -z "$EGREP"; then
+ ac_path_EGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in egrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_EGREP" || continue
+# Check for GNU ac_path_EGREP and select it if it is found.
+ # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'EGREP' >> "conftest.nl"
+ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_EGREP="$ac_path_EGREP"
+ ac_path_EGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_EGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_EGREP"; then
+ as_fn_error $? "no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_EGREP=$EGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_EGREP" >&5
+$as_echo "$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for fgrep" >&5
+$as_echo_n "checking for fgrep... " >&6; }
+if ${ac_cv_path_FGREP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1
+ then ac_cv_path_FGREP="$GREP -F"
+ else
+ if test -z "$FGREP"; then
+ ac_path_FGREP_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in fgrep; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_FGREP" || continue
+# Check for GNU ac_path_FGREP and select it if it is found.
+ # Check for GNU $ac_path_FGREP
+case `"$ac_path_FGREP" --version 2>&1` in
+*GNU*)
+ ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;;
+*)
+ ac_count=0
+ $as_echo_n 0123456789 >"conftest.in"
+ while :
+ do
+ cat "conftest.in" "conftest.in" >"conftest.tmp"
+ mv "conftest.tmp" "conftest.in"
+ cp "conftest.in" "conftest.nl"
+ $as_echo 'FGREP' >> "conftest.nl"
+ "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break
+ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+ as_fn_arith $ac_count + 1 && ac_count=$as_val
+ if test $ac_count -gt ${ac_path_FGREP_max-0}; then
+ # Best one so far, save it but keep looking for a better one
+ ac_cv_path_FGREP="$ac_path_FGREP"
+ ac_path_FGREP_max=$ac_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test $ac_count -gt 10 && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+ $ac_path_FGREP_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_FGREP"; then
+ as_fn_error $? "no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" "$LINENO" 5
+ fi
+else
+ ac_cv_path_FGREP=$FGREP
+fi
+
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_FGREP" >&5
+$as_echo "$ac_cv_path_FGREP" >&6; }
+ FGREP="$ac_cv_path_FGREP"
+
+
+test -z "$GREP" && GREP=grep
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to print strings" >&5
+$as_echo_n "checking how to print strings... " >&6; }
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO ""
+}
+
+case $ECHO in
+ printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
+$as_echo "printf" >&6; } ;;
+ print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
+$as_echo "print -r" >&6; } ;;
+ *) { $as_echo "$as_me:${as_lineno-$LINENO}: result: cat" >&5
+$as_echo "cat" >&6; } ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-gnu-ld was given.
+if test "${with_gnu_ld+set}" = set; then :
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
+else
+ with_gnu_ld=no
+fi
+
+ac_prog=ld
+if test yes = "$GCC"; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
+$as_echo_n "checking for ld used by $CC... " >&6; }
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return, which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [\\/]* | ?:[\\/]*)
+ re_direlt='/[^/][^/]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD=$ac_prog
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test yes = "$with_gnu_ld"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
+$as_echo_n "checking for GNU ld... " >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for non-GNU ld" >&5
+$as_echo_n "checking for non-GNU ld... " >&6; }
+fi
+if ${lt_cv_path_LD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -z "$LD"; then
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD=$ac_dir/$ac_prog
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test no != "$with_gnu_ld" && break
+ ;;
+ *)
+ test yes != "$with_gnu_ld" && break
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+else
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi
+fi
+
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
+$as_echo "$LD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+test -z "$LD" && as_fn_error $? "no acceptable ld found in \$PATH" "$LINENO" 5
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if the linker ($LD) is GNU ld" >&5
+$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; }
+if ${lt_cv_prog_gnu_ld+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_gnu_ld" >&5
+$as_echo "$lt_cv_prog_gnu_ld" >&6; }
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+
+
+
+
+
+
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to run the C preprocessor" >&5
+$as_echo_n "checking how to run the C preprocessor... " >&6; }
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+ if ${ac_cv_prog_CPP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ # Double quotes because CPP needs to be expanded
+ for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
+ do
+ ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+ break
+fi
+
+ done
+ ac_cv_prog_CPP=$CPP
+
+fi
+ CPP=$ac_cv_prog_CPP
+else
+ ac_cv_prog_CPP=$CPP
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $CPP" >&5
+$as_echo "$CPP" >&6; }
+ac_preproc_ok=false
+for ac_c_preproc_warn_flag in '' yes
+do
+ # Use a header file that comes with gcc, so configuring glibc
+ # with a fresh cross-compiler works.
+ # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
+ # <limits.h> exists even on freestanding compilers.
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp. "Syntax error" is here to catch this case.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#ifdef __STDC__
+# include <limits.h>
+#else
+# include <assert.h>
+#endif
+ Syntax error
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+
+else
+ # Broken: fails on valid input.
+continue
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+ # OK, works on sane cases. Now check whether nonexistent headers
+ # can be detected and how.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ac_nonexistent.h>
+_ACEOF
+if ac_fn_c_try_cpp "$LINENO"; then :
+ # Broken: success on invalid input.
+continue
+else
+ # Passes both tests.
+ac_preproc_ok=:
+break
+fi
+rm -f conftest.err conftest.i conftest.$ac_ext
+
+done
+# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
+rm -f conftest.i conftest.err conftest.$ac_ext
+if $ac_preproc_ok; then :
+
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "C preprocessor \"$CPP\" fails sanity check
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+for ac_prog in gawk mawk nawk awk
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AWK+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AWK"; then
+ ac_cv_prog_AWK="$AWK" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AWK="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AWK=$ac_cv_prog_AWK
+if test -n "$AWK"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AWK" >&5
+$as_echo "$AWK" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AWK" && break
+done
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ln -s works" >&5
+$as_echo_n "checking whether ln -s works... " >&6; }
+LN_S=$as_ln_s
+if test "$LN_S" = "ln -s"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no, using $LN_S" >&5
+$as_echo "no, using $LN_S" >&6; }
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; }
+set x ${MAKE-make}
+ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if eval \${ac_cv_prog_make_${ac_make}_set+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
+all:
+ @echo '@@@%%%=$(MAKE)=@@@%%%'
+_ACEOF
+# GNU make sometimes prints "make[1]: Entering ...", which would confuse us.
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+ *@@@%%%=?*=@@@%%%*)
+ eval ac_cv_prog_make_${ac_make}_set=yes;;
+ *)
+ eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
+rm -f conftest.make
+fi
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ SET_MAKE=
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+
+case `pwd` in
+ *\ * | *\ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
+$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;;
+esac
+
+
+
+macro_version='2.4.6'
+macro_revision='2.4.6'
+
+
+
+
+
+
+
+
+
+
+
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\(["`$\\]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for BSD- or MS-compatible name lister (nm)" >&5
+$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; }
+if ${lt_cv_path_NM+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM=$NM
+else
+ lt_nm_to_check=${ac_tool_prefix}nm
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break 2
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break 2
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+ done
+ : ${lt_cv_path_NM=no}
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
+$as_echo "$lt_cv_path_NM" >&6; }
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ if test -n "$ac_tool_prefix"; then
+ for ac_prog in dumpbin "link -dump"
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DUMPBIN"; then
+ ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DUMPBIN=$ac_cv_prog_DUMPBIN
+if test -n "$DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DUMPBIN" >&5
+$as_echo "$DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$DUMPBIN" && break
+ done
+fi
+if test -z "$DUMPBIN"; then
+ ac_ct_DUMPBIN=$DUMPBIN
+ for ac_prog in dumpbin "link -dump"
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DUMPBIN+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DUMPBIN"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DUMPBIN="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN
+if test -n "$ac_ct_DUMPBIN"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DUMPBIN" >&5
+$as_echo "$ac_ct_DUMPBIN" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_DUMPBIN" && break
+done
+
+ if test "x$ac_ct_DUMPBIN" = x; then
+ DUMPBIN=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DUMPBIN=$ac_ct_DUMPBIN
+ fi
+fi
+
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols -headers"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
+ fi
+fi
+test -z "$NM" && NM=nm
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the name lister ($NM) interface" >&5
+$as_echo_n "checking the name lister ($NM) interface... " >&6; }
+if ${lt_cv_nm_interface+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&5)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&5)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&5
+ (eval echo "\"\$as_me:$LINENO: output\"" >&5)
+ cat conftest.out >&5
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_nm_interface" >&5
+$as_echo "$lt_cv_nm_interface" >&6; }
+
+# find the maximum length of command line arguments
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking the maximum length of command line arguments" >&5
+$as_echo_n "checking the maximum length of command line arguments... " >&6; }
+if ${lt_cv_sys_max_cmd_len+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ i=0
+ teststring=ABCD
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test 17 != "$i" # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+
+fi
+
+if test -n "$lt_cv_sys_max_cmd_len"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
+$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: none" >&5
+$as_echo "none" >&6; }
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+
+
+
+
+
+
+: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+
+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+
+
+
+
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to $host format" >&5
+$as_echo_n "checking how to convert $build file names to $host format... " >&6; }
+if ${lt_cv_to_host_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+
+fi
+
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_host_file_cmd" >&5
+$as_echo "$lt_cv_to_host_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to convert $build file names to toolchain format" >&5
+$as_echo_n "checking how to convert $build file names to toolchain format... " >&6; }
+if ${lt_cv_to_tool_file_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ #assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_to_tool_file_cmd" >&5
+$as_echo "$lt_cv_to_tool_file_cmd" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $LD option to reload object files" >&5
+$as_echo_n "checking for $LD option to reload object files... " >&6; }
+if ${lt_cv_ld_reload_flag+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_reload_flag" >&5
+$as_echo "$lt_cv_ld_reload_flag" >&6; }
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test yes != "$GCC"; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to recognize dependent libraries" >&5
+$as_echo_n "checking how to recognize dependent libraries... " >&6; }
+if ${lt_cv_deplibs_check_method+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[4-9]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[45]*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]'
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9]\.[0-9]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[3-9]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_deplibs_check_method" >&5
+$as_echo "$lt_cv_deplibs_check_method" >&6; }
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[\1]\/[\1]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to associate runtime and link libraries" >&5
+$as_echo_n "checking how to associate runtime and link libraries... " >&6; }
+if ${lt_cv_sharedlib_from_linklib_cmd+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
+ ;;
+esac
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sharedlib_from_linklib_cmd" >&5
+$as_echo "$lt_cv_sharedlib_from_linklib_cmd" >&6; }
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ for ac_prog in ar
+ do
+ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
+set dummy $ac_tool_prefix$ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AR="$ac_tool_prefix$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AR=$ac_cv_prog_AR
+if test -n "$AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AR" >&5
+$as_echo "$AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$AR" && break
+ done
+fi
+if test -z "$AR"; then
+ ac_ct_AR=$AR
+ for ac_prog in ar
+do
+ # Extract the first word of "$ac_prog", so it can be a program name with args.
+set dummy $ac_prog; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AR+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AR"; then
+ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AR="$ac_prog"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AR=$ac_cv_prog_ac_ct_AR
+if test -n "$ac_ct_AR"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AR" >&5
+$as_echo "$ac_ct_AR" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ test -n "$ac_ct_AR" && break
+done
+
+ if test "x$ac_ct_AR" = x; then
+ AR="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AR=$ac_ct_AR
+ fi
+fi
+
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for archiver @FILE support" >&5
+$as_echo_n "checking for archiver @FILE support... " >&6; }
+if ${lt_cv_ar_at_file+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ar_at_file=no
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&5'
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test 0 -eq "$ac_status"; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
+ (eval $lt_ar_try) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ if test 0 -ne "$ac_status"; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
+$as_echo "$lt_cv_ar_at_file" >&6; }
+
+if test no = "$lt_cv_ar_at_file"; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+STRIP=$ac_cv_prog_STRIP
+if test -n "$STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $STRIP" >&5
+$as_echo "$STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_STRIP"; then
+ ac_ct_STRIP=$STRIP
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_STRIP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_STRIP"; then
+ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_STRIP="strip"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
+if test -n "$ac_ct_STRIP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_STRIP" >&5
+$as_echo "$ac_ct_STRIP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_STRIP" = x; then
+ STRIP=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ STRIP=$ac_ct_STRIP
+ fi
+else
+ STRIP="$ac_cv_prog_STRIP"
+fi
+
+test -z "$STRIP" && STRIP=:
+
+
+
+
+
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+RANLIB=$ac_cv_prog_RANLIB
+if test -n "$RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $RANLIB" >&5
+$as_echo "$RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_RANLIB"; then
+ ac_ct_RANLIB=$RANLIB
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_RANLIB+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_RANLIB"; then
+ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_RANLIB="ranlib"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
+if test -n "$ac_ct_RANLIB"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_RANLIB" >&5
+$as_echo "$ac_ct_RANLIB" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_RANLIB" = x; then
+ RANLIB=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ RANLIB=$ac_ct_RANLIB
+ fi
+else
+ RANLIB="$ac_cv_prog_RANLIB"
+fi
+
+test -z "$RANLIB" && RANLIB=:
+
+
+
+
+
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ bitrig* | openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking command to parse $NM output from $compiler object" >&5
+$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; }
+if ${lt_cv_sys_global_symbol_pipe+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[BCDEGRST]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[BCDT]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[ABCDGISTW]'
+ ;;
+hpux*)
+ if test ia64 = "$host_cpu"; then
+ symcode='[ABCDEGRST]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[BCDEGRST]'
+ ;;
+osf*)
+ symcode='[BCDEGQRST]'
+ ;;
+solaris*)
+ symcode='[BDRT]'
+ ;;
+sco3.2v5*)
+ symcode='[DT]'
+ ;;
+sysv4.2uw2*)
+ symcode='[DT]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[ABDT]'
+ ;;
+sysv4)
+ symcode='[DFNSTU]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[ABCDGIRSTW]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK '"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist\""; } >&5
+ (eval $NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS=conftstm.$ac_objext
+ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s conftest$ac_exeext; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&5
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&5
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
+ fi
+ else
+ echo "$progname: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test yes = "$pipe_works"; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+
+fi
+
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: failed" >&5
+$as_echo "failed" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[@]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
+$as_echo_n "checking for sysroot... " >&6; }
+
+# Check whether --with-sysroot was given.
+if test "${with_sysroot+set}" = set; then :
+ withval=$with_sysroot;
+else
+ with_sysroot=no
+fi
+
+
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+ if test yes = "$GCC"; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
+ as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
+ ;;
+esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${lt_sysroot:-no}" >&5
+$as_echo "${lt_sysroot:-no}" >&6; }
+
+
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+ ac_path_lt_DD_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in dd; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+ $ac_path_lt_DD_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_lt_DD"; then
+ :
+ fi
+else
+ ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+# Check whether --enable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then :
+ enableval=$enable_libtool_lock;
+fi
+
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE=32
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE=64
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS -belf"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
+$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
+if ${lt_cv_cc_needs_belf+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_cc_needs_belf=yes
+else
+ lt_cv_cc_needs_belf=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
+$as_echo "$lt_cv_cc_needs_belf" >&6; }
+ if test yes != "$lt_cv_cc_needs_belf"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS=$SAVE_CFLAGS
+ fi
+ ;;
+*-*solaris*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo 'int i;' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*|x86_64-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD=${LD-ld}_sol2
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks=$enable_libtool_lock
+
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
+set dummy ${ac_tool_prefix}mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$MANIFEST_TOOL"; then
+ ac_cv_prog_MANIFEST_TOOL="$MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_MANIFEST_TOOL="${ac_tool_prefix}mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+MANIFEST_TOOL=$ac_cv_prog_MANIFEST_TOOL
+if test -n "$MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MANIFEST_TOOL" >&5
+$as_echo "$MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_MANIFEST_TOOL"; then
+ ac_ct_MANIFEST_TOOL=$MANIFEST_TOOL
+ # Extract the first word of "mt", so it can be a program name with args.
+set dummy mt; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_MANIFEST_TOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_MANIFEST_TOOL"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="$ac_ct_MANIFEST_TOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_MANIFEST_TOOL="mt"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_MANIFEST_TOOL=$ac_cv_prog_ac_ct_MANIFEST_TOOL
+if test -n "$ac_ct_MANIFEST_TOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_MANIFEST_TOOL" >&5
+$as_echo "$ac_ct_MANIFEST_TOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_MANIFEST_TOOL" = x; then
+ MANIFEST_TOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ MANIFEST_TOOL=$ac_ct_MANIFEST_TOOL
+ fi
+else
+ MANIFEST_TOOL="$ac_cv_prog_MANIFEST_TOOL"
+fi
+
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $MANIFEST_TOOL is a manifest tool" >&5
+$as_echo_n "checking if $MANIFEST_TOOL is a manifest tool... " >&6; }
+if ${lt_cv_path_mainfest_tool+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&5
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&5
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
+$as_echo "$lt_cv_path_mainfest_tool" >&6; }
+if test yes != "$lt_cv_path_mainfest_tool"; then
+ MANIFEST_TOOL=:
+fi
+
+
+
+
+
+
+ case $host_os in
+ rhapsody* | darwin*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DSYMUTIL"; then
+ ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DSYMUTIL=$ac_cv_prog_DSYMUTIL
+if test -n "$DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DSYMUTIL" >&5
+$as_echo "$DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DSYMUTIL"; then
+ ac_ct_DSYMUTIL=$DSYMUTIL
+ # Extract the first word of "dsymutil", so it can be a program name with args.
+set dummy dsymutil; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DSYMUTIL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DSYMUTIL"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DSYMUTIL="dsymutil"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL
+if test -n "$ac_ct_DSYMUTIL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DSYMUTIL" >&5
+$as_echo "$ac_ct_DSYMUTIL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DSYMUTIL" = x; then
+ DSYMUTIL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DSYMUTIL=$ac_ct_DSYMUTIL
+ fi
+else
+ DSYMUTIL="$ac_cv_prog_DSYMUTIL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args.
+set dummy ${ac_tool_prefix}nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$NMEDIT"; then
+ ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+NMEDIT=$ac_cv_prog_NMEDIT
+if test -n "$NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $NMEDIT" >&5
+$as_echo "$NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_NMEDIT"; then
+ ac_ct_NMEDIT=$NMEDIT
+ # Extract the first word of "nmedit", so it can be a program name with args.
+set dummy nmedit; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_NMEDIT+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_NMEDIT"; then
+ ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_NMEDIT="nmedit"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT
+if test -n "$ac_ct_NMEDIT"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_NMEDIT" >&5
+$as_echo "$ac_ct_NMEDIT" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_NMEDIT" = x; then
+ NMEDIT=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ NMEDIT=$ac_ct_NMEDIT
+ fi
+else
+ NMEDIT="$ac_cv_prog_NMEDIT"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args.
+set dummy ${ac_tool_prefix}lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$LIPO"; then
+ ac_cv_prog_LIPO="$LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_LIPO="${ac_tool_prefix}lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+LIPO=$ac_cv_prog_LIPO
+if test -n "$LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $LIPO" >&5
+$as_echo "$LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_LIPO"; then
+ ac_ct_LIPO=$LIPO
+ # Extract the first word of "lipo", so it can be a program name with args.
+set dummy lipo; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_LIPO+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_LIPO"; then
+ ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_LIPO="lipo"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO
+if test -n "$ac_ct_LIPO"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_LIPO" >&5
+$as_echo "$ac_ct_LIPO" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_LIPO" = x; then
+ LIPO=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ LIPO=$ac_ct_LIPO
+ fi
+else
+ LIPO="$ac_cv_prog_LIPO"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL"; then
+ ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL="${ac_tool_prefix}otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL=$ac_cv_prog_OTOOL
+if test -n "$OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
+$as_echo "$OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL"; then
+ ac_ct_OTOOL=$OTOOL
+ # Extract the first word of "otool", so it can be a program name with args.
+set dummy otool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL"; then
+ ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL="otool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL
+if test -n "$ac_ct_OTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL" >&5
+$as_echo "$ac_ct_OTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL" = x; then
+ OTOOL=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL=$ac_ct_OTOOL
+ fi
+else
+ OTOOL="$ac_cv_prog_OTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args.
+set dummy ${ac_tool_prefix}otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OTOOL64"; then
+ ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OTOOL64=$ac_cv_prog_OTOOL64
+if test -n "$OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL64" >&5
+$as_echo "$OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OTOOL64"; then
+ ac_ct_OTOOL64=$OTOOL64
+ # Extract the first word of "otool64", so it can be a program name with args.
+set dummy otool64; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OTOOL64+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OTOOL64"; then
+ ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OTOOL64="otool64"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64
+if test -n "$ac_ct_OTOOL64"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OTOOL64" >&5
+$as_echo "$ac_ct_OTOOL64" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OTOOL64" = x; then
+ OTOOL64=":"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OTOOL64=$ac_ct_OTOOL64
+ fi
+else
+ OTOOL64="$ac_cv_prog_OTOOL64"
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -single_module linker flag" >&5
+$as_echo_n "checking for -single_module linker flag... " >&6; }
+if ${lt_cv_apple_cc_single_mod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_apple_cc_single_mod=no
+ if test -z "$LT_MULTI_MODULE"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&5
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_apple_cc_single_mod" >&5
+$as_echo "$lt_cv_apple_cc_single_mod" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -exported_symbols_list linker flag" >&5
+$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; }
+if ${lt_cv_ld_exported_symbols_list+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_ld_exported_symbols_list=yes
+else
+ lt_cv_ld_exported_symbols_list=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
+$as_echo "$lt_cv_ld_exported_symbols_list" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for -force_load linker flag" >&5
+$as_echo_n "checking for -force_load linker flag... " >&6; }
+if ${lt_cv_ld_force_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&5
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&5
+ echo "$AR cru libconftest.a conftest.o" >&5
+ $AR cru libconftest.a conftest.o 2>&5
+ echo "$RANLIB libconftest.a" >&5
+ $RANLIB libconftest.a 2>&5
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&5
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&5
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&5
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_force_load" >&5
+$as_echo "$lt_cv_ld_force_load" >&6; }
+ case $host_os in
+ rhapsody* | darwin1.[012])
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[91]*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+ fi
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+# On IRIX 5.3, sys/types and inttypes.h are conflicting.
+for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
+ inttypes.h stdint.h unistd.h
+do :
+ as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
+ac_fn_c_check_header_compile "$LINENO" "$ac_header" "$as_ac_Header" "$ac_includes_default
+"
+if eval test \"x\$"$as_ac_Header"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1
+_ACEOF
+
+fi
+
+done
+
+
+for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+
+fi
+
+done
+
+
+
+
+
+# Set options
+enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_AS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+AS=$ac_cv_prog_AS
+if test -n "$AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $AS" >&5
+$as_echo "$AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_AS"; then
+ ac_ct_AS=$AS
+ # Extract the first word of "as", so it can be a program name with args.
+set dummy as; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_AS+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_AS"; then
+ ac_cv_prog_ac_ct_AS="$ac_ct_AS" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_AS="as"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_AS=$ac_cv_prog_ac_ct_AS
+if test -n "$ac_ct_AS"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_AS" >&5
+$as_echo "$ac_ct_AS" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_AS" = x; then
+ AS="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ AS=$ac_ct_AS
+ fi
+else
+ AS="$ac_cv_prog_AS"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args.
+set dummy ${ac_tool_prefix}dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$DLLTOOL"; then
+ ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+DLLTOOL=$ac_cv_prog_DLLTOOL
+if test -n "$DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $DLLTOOL" >&5
+$as_echo "$DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_DLLTOOL"; then
+ ac_ct_DLLTOOL=$DLLTOOL
+ # Extract the first word of "dlltool", so it can be a program name with args.
+set dummy dlltool; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_DLLTOOL+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_DLLTOOL"; then
+ ac_cv_prog_ac_ct_DLLTOOL="$ac_ct_DLLTOOL" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_DLLTOOL="dlltool"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_DLLTOOL=$ac_cv_prog_ac_ct_DLLTOOL
+if test -n "$ac_ct_DLLTOOL"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_DLLTOOL" >&5
+$as_echo "$ac_ct_DLLTOOL" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_DLLTOOL" = x; then
+ DLLTOOL="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ DLLTOOL=$ac_ct_DLLTOOL
+ fi
+else
+ DLLTOOL="$ac_cv_prog_DLLTOOL"
+fi
+
+ if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args.
+set dummy ${ac_tool_prefix}objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$OBJDUMP"; then
+ ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+OBJDUMP=$ac_cv_prog_OBJDUMP
+if test -n "$OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OBJDUMP" >&5
+$as_echo "$OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+fi
+if test -z "$ac_cv_prog_OBJDUMP"; then
+ ac_ct_OBJDUMP=$OBJDUMP
+ # Extract the first word of "objdump", so it can be a program name with args.
+set dummy objdump; ac_word=$2
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
+$as_echo_n "checking for $ac_word... " >&6; }
+if ${ac_cv_prog_ac_ct_OBJDUMP+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test -n "$ac_ct_OBJDUMP"; then
+ ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test.
+else
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+ ac_cv_prog_ac_ct_OBJDUMP="objdump"
+ $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
+ break 2
+ fi
+done
+ done
+IFS=$as_save_IFS
+
+fi
+fi
+ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP
+if test -n "$ac_ct_OBJDUMP"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_ct_OBJDUMP" >&5
+$as_echo "$ac_ct_OBJDUMP" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+ if test "x$ac_ct_OBJDUMP" = x; then
+ OBJDUMP="false"
+ else
+ case $cross_compiling:$ac_tool_warned in
+yes:)
+{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: using cross tools not prefixed with host triplet" >&5
+$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;}
+ac_tool_warned=yes ;;
+esac
+ OBJDUMP=$ac_ct_OBJDUMP
+ fi
+else
+ OBJDUMP="$ac_cv_prog_OBJDUMP"
+fi
+
+ ;;
+esac
+
+test -z "$AS" && AS=as
+
+
+
+
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+
+
+
+
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+
+
+
+
+
+
+
+ enable_dlopen=no
+
+
+
+ # Check whether --enable-shared was given.
+if test "${enable_shared+set}" = set; then :
+ enableval=$enable_shared; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
+else
+ enable_shared=yes
+fi
+
+
+
+
+
+
+
+
+
+ # Check whether --enable-static was given.
+if test "${enable_static+set}" = set; then :
+ enableval=$enable_static; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
+else
+ enable_static=yes
+fi
+
+
+
+
+
+
+
+
+
+
+# Check whether --with-pic was given.
+if test "${with_pic+set}" = set; then :
+ withval=$with_pic; lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for lt_pkg in $withval; do
+ IFS=$lt_save_ifs
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
+else
+ pic_mode=default
+fi
+
+
+
+
+
+
+
+
+ # Check whether --enable-fast-install was given.
+if test "${enable_fast_install+set}" = set; then :
+ enableval=$enable_fast_install; p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac
+else
+ enable_fast_install=yes
+fi
+
+
+
+
+
+
+
+
+ shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+ withval=$with_aix_soname; case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname
+else
+ if ${lt_cv_with_aix_soname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_with_aix_soname=aix
+fi
+
+ with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+test -z "$LN_S" && LN_S="ln -s"
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for objdir" >&5
+$as_echo_n "checking for objdir... " >&6; }
+if ${lt_cv_objdir+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_objdir" >&5
+$as_echo "$lt_cv_objdir" >&6; }
+objdir=$lt_cv_objdir
+
+
+
+
+
+cat >>confdefs.h <<_ACEOF
+#define LT_OBJDIR "$lt_cv_objdir/"
+_ACEOF
+
+
+
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
+
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ac_tool_prefix}file" >&5
+$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/${ac_tool_prefix}file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
+ ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+
+
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for file" >&5
+$as_echo_n "checking for file... " >&6; }
+if ${lt_cv_path_MAGIC_CMD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ case $MAGIC_CMD in
+[\\/*] | ?:[\\/]*)
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
+ for ac_dir in $ac_dummy; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
+ ;;
+esac
+fi
+
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
+$as_echo "$MAGIC_CMD" >&6; }
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+
+lt_save_CC=$CC
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+objext=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+
+
+
+
+
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+
+lt_prog_compiler_no_builtin_flag=
+
+if test yes = "$GCC"; then
+ case $cc_basename in
+ nvcc*)
+ lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
+ *)
+ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ;;
+ esac
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; }
+if ${lt_cv_prog_compiler_rtti_exceptions+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_rtti_exceptions=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_rtti_exceptions=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
+ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
+else
+ :
+fi
+
+fi
+
+
+
+
+
+
+ lt_prog_compiler_wl=
+lt_prog_compiler_pic=
+lt_prog_compiler_static=
+
+
+ if test yes = "$GCC"; then
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_static='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
+ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ lt_prog_compiler_static=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[3-9]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ lt_prog_compiler_can_build_shared=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ lt_prog_compiler_pic='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ lt_prog_compiler_wl='-Xlinker '
+ if test -n "$lt_prog_compiler_pic"; then
+ lt_prog_compiler_pic="-Xcompiler $lt_prog_compiler_pic"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ lt_prog_compiler_wl='-Wl,'
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ lt_prog_compiler_static='-Bstatic'
+ else
+ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ lt_prog_compiler_pic='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ lt_prog_compiler_static='$wl-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ lt_prog_compiler_wl='-Wl,'
+ # PIC (with -KPIC) is the default.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ # old Intel for x86_64, which still supported -KPIC.
+ ecc*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='--shared'
+ lt_prog_compiler_static='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ ccc*)
+ lt_prog_compiler_wl='-Wl,'
+ # All Alpha code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-qpic'
+ lt_prog_compiler_static='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [1-7].* | *Sun*Fortran*\ 8.[0-3]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ lt_prog_compiler_wl='-Wl,'
+ ;;
+ *Intel*\ [CF]*Compiler*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
+ *Portland\ Group*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fpic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ lt_prog_compiler_pic='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ lt_prog_compiler_wl='-Wl,'
+ # All OSF/1 code is PIC.
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ rdos*)
+ lt_prog_compiler_static='-non_shared'
+ ;;
+
+ solaris*)
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ lt_prog_compiler_wl='-Qoption ld ';;
+ *)
+ lt_prog_compiler_wl='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ lt_prog_compiler_wl='-Qoption ld '
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ lt_prog_compiler_pic='-Kconform_pic'
+ lt_prog_compiler_static='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-KPIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ unicos*)
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_can_build_shared=no
+ ;;
+
+ uts4*)
+ lt_prog_compiler_pic='-pic'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+
+ *)
+ lt_prog_compiler_can_build_shared=no
+ ;;
+ esac
+ fi
+
+case $host_os in
+ # For platforms that do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ lt_prog_compiler_pic=
+ ;;
+ *)
+ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
+ ;;
+esac
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $compiler option to produce PIC" >&5
+$as_echo_n "checking for $compiler option to produce PIC... " >&6; }
+if ${lt_cv_prog_compiler_pic+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic=$lt_prog_compiler_pic
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic" >&5
+$as_echo "$lt_cv_prog_compiler_pic" >&6; }
+lt_prog_compiler_pic=$lt_cv_prog_compiler_pic
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$lt_prog_compiler_pic"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; }
+if ${lt_cv_prog_compiler_pic_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_pic_works=no
+ ac_outfile=conftest.$ac_objext
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_pic_works=yes
+ fi
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
+$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
+ case $lt_prog_compiler_pic in
+ "" | " "*) ;;
+ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
+ esac
+else
+ lt_prog_compiler_pic=
+ lt_prog_compiler_can_build_shared=no
+fi
+
+fi
+
+
+
+
+
+
+
+
+
+
+
+#
+# Check to make sure the static flag actually works.
+#
+wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; }
+if ${lt_cv_prog_compiler_static_works+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_static_works=no
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ else
+ lt_cv_prog_compiler_static_works=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
+$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
+
+if test yes = "$lt_cv_prog_compiler_static_works"; then
+ :
+else
+ lt_prog_compiler_static=
+fi
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $compiler supports -c -o file.$ac_objext" >&5
+$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; }
+if ${lt_cv_prog_compiler_c_o+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler_c_o=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&5)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&5
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler_c_o=yes
+ fi
+ fi
+ chmod u+w . 2>&5
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_c_o" >&5
+$as_echo "$lt_cv_prog_compiler_c_o" >&6; }
+
+
+
+
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
+ # do not overwrite the value of need_locks provided by the user
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
+$as_echo_n "checking if we can lock with hard links... " >&6; }
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
+$as_echo "$hard_links" >&6; }
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; }
+
+ runpath_var=
+ allow_undefined_flag=
+ always_export_symbols=no
+ archive_cmds=
+ archive_expsym_cmds=
+ compiler_needs_object=no
+ enable_shared_with_static_runtimes=no
+ export_dynamic_flag_spec=
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ hardcode_automatic=no
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ hardcode_libdir_flag_spec=
+ hardcode_libdir_separator=
+ hardcode_minus_L=no
+ hardcode_shlibpath_var=unsupported
+ inherit_rpath=no
+ link_all_deplibs=unknown
+ module_cmds=
+ module_expsym_cmds=
+ old_archive_from_new_cmds=
+ old_archive_from_expsyms_cmds=
+ thread_safe_flag_spec=
+ whole_archive_flag_spec=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ include_expsyms=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
+ exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test yes != "$GCC"; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd* | bitrig*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ ld_shlibs=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test yes = "$with_gnu_ld"; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[2-9]*) ;;
+ *\ \(GNU\ Binutils\)\ [3-9]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test yes = "$lt_use_gnu_ld_interface"; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='$wl'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec='$wl--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ else
+ whole_archive_flag_spec=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[3-9]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test ia64 != "$host_cpu"; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ allow_undefined_flag=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
+ # as there is no search path for DLLs.
+ hardcode_libdir_flag_spec='-L$libdir'
+ export_dynamic_flag_spec='$wl--export-all-symbols'
+ allow_undefined_flag=unsupported
+ always_export_symbols=no
+ enable_shared_with_static_runtimes=yes
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/;s/^.*[ ]__nm__\([^ ]*\)[ ][^ ]*/\1 DATA/;/^I[ ]/d;/^[AITW][ ]/s/.* //'\'' | sort | uniq > $export_symbols'
+ exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ haiku*)
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ link_all_deplibs=yes
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ interix[3-9]*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test linux-dietlibc = "$host_os"; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test no = "$tmp_diet"
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ whole_archive_flag_spec=
+ tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
+ xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ compiler_needs_object=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ compiler_needs_object=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+ if test yes = "$supports_anon_versioning"; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ tcc*)
+ export_dynamic_flag_spec='-rdynamic'
+ ;;
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
+ archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*)
+ ld_shlibs=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ ld_shlibs=no
+ fi
+ ;;
+ esac
+
+ if test no = "$ld_shlibs"; then
+ runpath_var=
+ hardcode_libdir_flag_spec=
+ export_dynamic_flag_spec=
+ whole_archive_flag_spec=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ hardcode_minus_L=yes
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ hardcode_direct=unsupported
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test ia64 = "$host_cpu"; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+ else
+ export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
+ case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
+ for ld_flag in $LDFLAGS; do
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ archive_cmds=''
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ file_list_spec='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ ;;
+ esac
+
+ if test yes = "$GCC"; then
+ case $host_os in aix4.[012]|aix4.[012].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`$CC -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ hardcode_direct=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ hardcode_minus_L=yes
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_libdir_separator=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
+ fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
+ else
+ # not using gcc
+ if test ia64 = "$host_cpu"; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
+ else
+ shared_flag='$wl-bM:SRE'
+ fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
+ fi
+ fi
+
+ export_dynamic_flag_spec='$wl-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ always_export_symbols=yes
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ allow_undefined_flag='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=/usr/lib:/lib
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+ else
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
+ allow_undefined_flag="-z nodefs"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ if ${lt_cv_aix_libpath_+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+
+ lt_aix_libpath_sed='
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }'
+ lt_cv_aix_libpath_=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ if test -z "$lt_cv_aix_libpath_"; then
+ lt_cv_aix_libpath_=/usr/lib:/lib
+ fi
+
+fi
+
+ aix_libpath=$lt_cv_aix_libpath_
+fi
+
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ no_undefined_flag=' $wl-bernotok'
+ allow_undefined_flag=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ whole_archive_flag_spec='$convenience'
+ fi
+ archive_cmds_need_lc=yes
+ archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds=''
+ ;;
+ m68k)
+ archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[45]*)
+ export_dynamic_flag_spec=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ always_export_symbols=yes
+ file_list_spec='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, )='true'
+ enable_shared_with_static_runtimes=yes
+ exclude_expsyms='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1,DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ old_postinstall_cmds='chmod 644 $oldlib'
+ postlink_cmds='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ hardcode_libdir_flag_spec=' '
+ allow_undefined_flag=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ old_archive_from_new_cmds='true'
+ # FIXME: Should let the user specify the lib program.
+ old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ enable_shared_with_static_runtimes=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+
+
+ archive_cmds_need_lc=no
+ hardcode_direct=no
+ hardcode_automatic=yes
+ hardcode_shlibpath_var=unsupported
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+
+ else
+ whole_archive_flag_spec=''
+ fi
+ link_all_deplibs=yes
+ allow_undefined_flag=$_lt_dar_allow_undefined
+ case $cc_basename in
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test yes = "$_lt_dar_can_shared"; then
+ output_verbose_link_cmd=func_echo_all
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+
+ else
+ ld_shlibs=no
+ fi
+
+ ;;
+
+ dgux*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ hpux9*)
+ if test yes = "$GCC"; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ else
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ fi
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ export_dynamic_flag_spec='$wl-E'
+ ;;
+
+ hpux10*)
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+ hardcode_libdir_separator=:
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='$wl-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if $CC understands -b" >&5
+$as_echo_n "checking if $CC understands -b... " >&6; }
+if ${lt_cv_prog_compiler__b+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_prog_compiler__b=no
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -b"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&5
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ lt_cv_prog_compiler__b=yes
+ fi
+ else
+ lt_cv_prog_compiler__b=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS=$save_LDFLAGS
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
+$as_echo "$lt_cv_prog_compiler__b" >&6; }
+
+if test yes = "$lt_cv_prog_compiler__b"; then
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+else
+ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+fi
+
+ ;;
+ esac
+ fi
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
+ hardcode_libdir_separator=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ hardcode_direct=no
+ hardcode_shlibpath_var=no
+ ;;
+ *)
+ hardcode_direct=yes
+ hardcode_direct_absolute=yes
+ export_dynamic_flag_spec='$wl-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ hardcode_minus_L=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the $host_os linker accepts -exported_symbol" >&5
+$as_echo_n "checking whether the $host_os linker accepts -exported_symbol... " >&6; }
+if ${lt_cv_irix_exported_symbol+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+int foo (void) { return 0; }
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ lt_cv_irix_exported_symbol=yes
+else
+ lt_cv_irix_exported_symbol=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
+$as_echo "$lt_cv_irix_exported_symbol" >&6; }
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+ fi
+ else
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ hardcode_libdir_separator=:
+ inherit_rpath=yes
+ link_all_deplibs=yes
+ ;;
+
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ ld_shlibs=yes
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ newsos6)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ hardcode_libdir_separator=:
+ hardcode_shlibpath_var=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd* | bitrig*)
+ if test -f /usr/libexec/ld.so; then
+ hardcode_direct=yes
+ hardcode_shlibpath_var=no
+ hardcode_direct_absolute=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
+ else
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ fi
+ else
+ ld_shlibs=no
+ fi
+ ;;
+
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
+ osf3*)
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ hardcode_libdir_separator=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ else
+ allow_undefined_flag=' -expect_unresolved \*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ hardcode_libdir_flag_spec='-rpath $libdir'
+ fi
+ archive_cmds_need_lc='no'
+ hardcode_libdir_separator=:
+ ;;
+
+ solaris*)
+ no_undefined_flag=' -z defs'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='$wl'
+ archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ hardcode_libdir_flag_spec='-R$libdir'
+ hardcode_shlibpath_var=no
+ case $host_os in
+ solaris2.[0-5] | solaris2.[0-5].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test yes = "$GCC"; then
+ whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+ else
+ whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ link_all_deplibs=yes
+ ;;
+
+ sunos4*)
+ if test sequent = "$host_vendor"; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_direct=yes
+ hardcode_minus_L=yes
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ reload_cmds='$CC -r -o $output$reload_objs'
+ hardcode_direct=no
+ ;;
+ motorola)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_direct=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ hardcode_shlibpath_var=no
+ ;;
+
+ sysv4.3*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ export_dynamic_flag_spec='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_shlibpath_var=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ ld_shlibs=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
+ no_undefined_flag='$wl-z,text'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ runpath_var='LD_RUN_PATH'
+
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We CANNOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ no_undefined_flag='$wl-z,text'
+ allow_undefined_flag='$wl-z,nodefs'
+ archive_cmds_need_lc=no
+ hardcode_shlibpath_var=no
+ hardcode_libdir_flag_spec='$wl-R,$libdir'
+ hardcode_libdir_separator=':'
+ link_all_deplibs=yes
+ export_dynamic_flag_spec='$wl-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_shlibpath_var=no
+ ;;
+
+ *)
+ ld_shlibs=no
+ ;;
+ esac
+
+ if test sni = "$host_vendor"; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ export_dynamic_flag_spec='$wl-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
+$as_echo "$ld_shlibs" >&6; }
+test no = "$ld_shlibs" && can_build_shared=no
+
+with_gnu_ld=$with_gnu_ld
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$archive_cmds_need_lc" in
+x|xyes)
+ # Assume -lc should be added
+ archive_cmds_need_lc=yes
+
+ if test yes,yes = "$GCC,$enable_shared"; then
+ case $archive_cmds in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether -lc should be explicitly linked in" >&5
+$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; }
+if ${lt_cv_archive_cmds_need_lc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ $RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$lt_prog_compiler_wl
+ pic_flag=$lt_prog_compiler_pic
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$allow_undefined_flag
+ allow_undefined_flag=
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\""; } >&5
+ (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }
+ then
+ lt_cv_archive_cmds_need_lc=no
+ else
+ lt_cv_archive_cmds_need_lc=yes
+ fi
+ allow_undefined_flag=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_archive_cmds_need_lc" >&5
+$as_echo "$lt_cv_archive_cmds_need_lc" >&6; }
+ archive_cmds_need_lc=$lt_cv_archive_cmds_need_lc
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
+$as_echo_n "checking dynamic linker characteristics... " >&6; }
+
+if test yes = "$GCC"; then
+ case $host_os in
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary...
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo = "/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[lt_foo]++; }
+ if (lt_freq[lt_foo] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+
+aix[4-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 supports IA64
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[01] | aix4.[01].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='$libname$shared_ext'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[45]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([a-zA-Z]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec=$LIB
+ if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[23].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[01]* | freebsdelf3.[01]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \
+ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+ fi
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[3-9]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ if ${lt_cv_shlibpath_overrides_runpath+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \
+ LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\""
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then :
+ lt_cv_shlibpath_overrides_runpath=yes
+fi
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+
+fi
+
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd* | bitrig*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec=/usr/lib
+ need_lib_prefix=no
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+os2*)
+ libname_spec='$name'
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test yes = "$with_gnu_ld"; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=sco
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test yes = "$with_gnu_ld"; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
+$as_echo "$dynamic_linker" >&6; }
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking how to hardcode library paths into programs" >&5
+$as_echo_n "checking how to hardcode library paths into programs... " >&6; }
+hardcode_action=
+if test -n "$hardcode_libdir_flag_spec" ||
+ test -n "$runpath_var" ||
+ test yes = "$hardcode_automatic"; then
+
+ # We can hardcode non-existent directories.
+ if test no != "$hardcode_direct" &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+ test no != "$hardcode_minus_L"; then
+ # Linking always hardcodes the temporary library directory.
+ hardcode_action=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ hardcode_action=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ hardcode_action=unsupported
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
+$as_echo "$hardcode_action" >&6; }
+
+if test relink = "$hardcode_action" ||
+ test yes = "$inherit_rpath"; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+
+
+
+
+
+
+ if test yes != "$enable_dlopen"; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen=load_add_on
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen=LoadLibrary
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else
+
+ lt_cv_dlopen=dyld
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+
+fi
+
+ ;;
+
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
+ *)
+ ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
+if test "x$ac_cv_func_shl_load" = xyes; then :
+ lt_cv_dlopen=shl_load
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
+$as_echo_n "checking for shl_load in -ldld... " >&6; }
+if ${ac_cv_lib_dld_shl_load+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char shl_load ();
+int
+main ()
+{
+return shl_load ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_shl_load=yes
+else
+ ac_cv_lib_dld_shl_load=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
+$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
+if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
+ lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
+else
+ ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
+if test "x$ac_cv_func_dlopen" = xyes; then :
+ lt_cv_dlopen=dlopen
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
+$as_echo_n "checking for dlopen in -ldl... " >&6; }
+if ${ac_cv_lib_dl_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldl $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dl_dlopen=yes
+else
+ ac_cv_lib_dl_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
+$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
+if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
+$as_echo_n "checking for dlopen in -lsvld... " >&6; }
+if ${ac_cv_lib_svld_dlopen+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lsvld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dlopen ();
+int
+main ()
+{
+return dlopen ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_svld_dlopen=yes
+else
+ ac_cv_lib_svld_dlopen=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
+$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
+if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
+$as_echo_n "checking for dld_link in -ldld... " >&6; }
+if ${ac_cv_lib_dld_dld_link+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-ldld $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char dld_link ();
+int
+main ()
+{
+return dld_link ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_dld_dld_link=yes
+else
+ ac_cv_lib_dld_dld_link=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
+$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
+if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
+ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+
+fi
+
+ ;;
+ esac
+
+ if test no = "$lt_cv_dlopen"; then
+ enable_dlopen=no
+ else
+ enable_dlopen=yes
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS=$LDFLAGS
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS=$LIBS
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
+$as_echo_n "checking whether a program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test yes = "$cross_compiling"; then :
+ lt_cv_dlopen_self=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
+$as_echo "$lt_cv_dlopen_self" >&6; }
+
+ if test yes = "$lt_cv_dlopen_self"; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
+$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
+if ${lt_cv_dlopen_self_static+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test yes = "$cross_compiling"; then :
+ lt_cv_dlopen_self_static=cross
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}
+_LT_EOF
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
+ (eval $ac_link) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
+ (./conftest; exit; ) >&5 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
+ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;;
+ esac
+ else :
+ # compilation failed
+ lt_cv_dlopen_self_static=no
+ fi
+fi
+rm -fr conftest*
+
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self_static" >&5
+$as_echo "$lt_cv_dlopen_self_static" >&6; }
+ fi
+
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+striplib=
+old_striplib=
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether stripping libraries is possible" >&5
+$as_echo_n "checking whether stripping libraries is possible... " >&6; }
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP"; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ fi
+ ;;
+ *)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ ;;
+ esac
+fi
+
+
+
+
+
+
+
+
+
+
+
+
+ # Report what library types will actually be built
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
+$as_echo_n "checking if libtool supports shared libraries... " >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
+$as_echo "$can_build_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
+$as_echo_n "checking whether to build shared libraries... " >&6; }
+ test no = "$can_build_shared" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test yes = "$enable_shared" && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[4-9]*)
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
+ fi
+ ;;
+ esac
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_shared" >&5
+$as_echo "$enable_shared" >&6; }
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
+$as_echo_n "checking whether to build static libraries... " >&6; }
+ # Make sure either enable_shared or enable_static is yes.
+ test yes = "$enable_shared" || enable_static=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
+$as_echo "$enable_static" >&6; }
+
+
+
+
+fi
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+CC=$lt_save_CC
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ ac_config_commands="$ac_config_commands libtool"
+
+
+
+
+# Only expand once:
+
+
+
+
+# Some awks crash when confronted with pnglibconf.dfa, do a test run now
+# to make sure this doesn't happen
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that AWK works" >&5
+$as_echo_n "checking that AWK works... " >&6; }
+if ${AWK} -f ${srcdir}/scripts/options.awk out="/dev/null" version=search\
+ ${srcdir}/pngconf.h ${srcdir}/scripts/pnglibconf.dfa\
+ ${srcdir}/pngusr.dfa 1>&2
+then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: ok" >&5
+$as_echo "ok" >&6; }
+else
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error 1 "failed
+See \`config.log' for more details" "$LINENO" 5; }
+fi
+
+# This is a remnant of the old cc -E validation, where it may have been
+# necessary to use a different preprocessor for .dfn files
+DFNCPP="$CPP"
+
+
+# -Werror cannot be passed to GCC in CFLAGS because configure will fail (it
+# checks the compiler with a program that generates a warning), add the
+# following option to deal with this
+
+# Check whether --enable-werror was given.
+if test "${enable_werror+set}" = set; then :
+ enableval=$enable_werror; test "$enable_werror" = "yes" && enable_werror="-Werror"
+ if test "$enable_werror" != "no"; then
+ sav_CFLAGS="$CFLAGS"
+ CFLAGS="$enable_werror $CFLAGS"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking if the compiler allows $enable_werror" >&5
+$as_echo_n "checking if the compiler allows $enable_werror... " >&6; }
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ int main(int argc, char **argv){
+ return argv[argc-1][0];
+ }
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ PNG_COPTS="$PNG_COPTS $enable_werror"
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ CFLAGS="$sav_CFLAGS"
+ fi
+fi
+
+
+# For GCC 5 the default mode for C is -std=gnu11 instead of -std=gnu89
+# In pngpriv.h we request just the POSIX 1003.1 and C89 APIs by defining _POSIX_SOURCE to 1
+# This is incompatible with the new default mode, so we test for that and force the
+# "-std=c89" compiler option:
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we need to force back C standard to C89" >&5
+$as_echo_n "checking if we need to force back C standard to C89... " >&6; }
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+ #define _POSIX_SOURCE 1
+ #include <stdio.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+else
+
+ if test "x$GCC" != "xyes"; then
+ as_fn_error $? "Forcing back to C89 is required but the flags are only known for GCC" "$LINENO" 5
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+ CFLAGS="$CFLAGS -std=c89"
+
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+# Checks for header files.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5
+$as_echo_n "checking for ANSI C header files... " >&6; }
+if ${ac_cv_header_stdc+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+
+int
+main ()
+{
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_header_stdc=yes
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <string.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "memchr" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <stdlib.h>
+
+_ACEOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ $EGREP "free" >/dev/null 2>&1; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+ if test "$cross_compiling" = yes; then :
+ :
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <ctype.h>
+#include <stdlib.h>
+#if ((' ' & 0x0FF) == 0x020)
+# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#else
+# define ISLOWER(c) \
+ (('a' <= (c) && (c) <= 'i') \
+ || ('j' <= (c) && (c) <= 'r') \
+ || ('s' <= (c) && (c) <= 'z'))
+# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
+#endif
+
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int
+main ()
+{
+ int i;
+ for (i = 0; i < 256; i++)
+ if (XOR (islower (i), ISLOWER (i))
+ || toupper (i) != TOUPPER (i))
+ return 2;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+
+else
+ ac_cv_header_stdc=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_header_stdc" >&5
+$as_echo "$ac_cv_header_stdc" >&6; }
+if test $ac_cv_header_stdc = yes; then
+
+$as_echo "#define STDC_HEADERS 1" >>confdefs.h
+
+fi
+
+
+# Checks for typedefs, structures, and compiler characteristics.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for an ANSI C-conforming const" >&5
+$as_echo_n "checking for an ANSI C-conforming const... " >&6; }
+if ${ac_cv_c_const+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+int
+main ()
+{
+
+#ifndef __cplusplus
+ /* Ultrix mips cc rejects this sort of thing. */
+ typedef int charset[2];
+ const charset cs = { 0, 0 };
+ /* SunOS 4.1.1 cc rejects this. */
+ char const *const *pcpcc;
+ char **ppc;
+ /* NEC SVR4.0.2 mips cc rejects this. */
+ struct point {int x, y;};
+ static struct point const zero = {0,0};
+ /* AIX XL C 1.02.0.0 rejects this.
+ It does not let you subtract one const X* pointer from another in
+ an arm of an if-expression whose if-part is not a constant
+ expression */
+ const char *g = "string";
+ pcpcc = &g + (g ? g-g : 0);
+ /* HPUX 7.0 cc rejects these. */
+ ++pcpcc;
+ ppc = (char**) pcpcc;
+ pcpcc = (char const *const *) ppc;
+ { /* SCO 3.2v4 cc rejects this sort of thing. */
+ char tx;
+ char *t = &tx;
+ char const *s = 0 ? (char *) 0 : (char const *) 0;
+
+ *t++ = 0;
+ if (s) return 0;
+ }
+ { /* Someone thinks the Sun supposedly-ANSI compiler will reject this. */
+ int x[] = {25, 17};
+ const int *foo = &x[0];
+ ++foo;
+ }
+ { /* Sun SC1.0 ANSI compiler rejects this -- but not the above. */
+ typedef const int *iptr;
+ iptr p = 0;
+ ++p;
+ }
+ { /* AIX XL C 1.02.0.0 rejects this sort of thing, saying
+ "k.c", line 2.27: 1506-025 (S) Operand must be a modifiable lvalue. */
+ struct s { int j; const int *ap[3]; } bx;
+ struct s *b = &bx; b->j = 5;
+ }
+ { /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */
+ const int foo = 10;
+ if (!foo) return 0;
+ }
+ return !cs[0] && !zero.x;
+#endif
+
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_const=yes
+else
+ ac_cv_c_const=no
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_const" >&5
+$as_echo "$ac_cv_c_const" >&6; }
+if test $ac_cv_c_const = no; then
+
+$as_echo "#define const /**/" >>confdefs.h
+
+fi
+
+ac_fn_c_check_type "$LINENO" "size_t" "ac_cv_type_size_t" "$ac_includes_default"
+if test "x$ac_cv_type_size_t" = xyes; then :
+
+else
+
+cat >>confdefs.h <<_ACEOF
+#define size_t unsigned int
+_ACEOF
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether struct tm is in sys/time.h or time.h" >&5
+$as_echo_n "checking whether struct tm is in sys/time.h or time.h... " >&6; }
+if ${ac_cv_struct_tm+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+#include <sys/types.h>
+#include <time.h>
+
+int
+main ()
+{
+struct tm tm;
+ int *p = &tm.tm_sec;
+ return !p;
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_struct_tm=time.h
+else
+ ac_cv_struct_tm=sys/time.h
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_struct_tm" >&5
+$as_echo "$ac_cv_struct_tm" >&6; }
+if test $ac_cv_struct_tm = sys/time.h; then
+
+$as_echo "#define TM_IN_SYS_TIME 1" >>confdefs.h
+
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for C/C++ restrict keyword" >&5
+$as_echo_n "checking for C/C++ restrict keyword... " >&6; }
+if ${ac_cv_c_restrict+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_cv_c_restrict=no
+ # The order here caters to the fact that C++ does not require restrict.
+ for ac_kw in __restrict __restrict__ _Restrict restrict; do
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+typedef int * int_ptr;
+ int foo (int_ptr $ac_kw ip) {
+ return ip[0];
+ }
+int
+main ()
+{
+int s[1];
+ int * $ac_kw t = s;
+ t[0] = 0;
+ return foo(t)
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_compile "$LINENO"; then :
+ ac_cv_c_restrict=$ac_kw
+fi
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+ test "$ac_cv_c_restrict" != no && break
+ done
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_c_restrict" >&5
+$as_echo "$ac_cv_c_restrict" >&6; }
+
+ case $ac_cv_c_restrict in
+ restrict) ;;
+ no) $as_echo "#define restrict /**/" >>confdefs.h
+ ;;
+ *) cat >>confdefs.h <<_ACEOF
+#define restrict $ac_cv_c_restrict
+_ACEOF
+ ;;
+ esac
+
+
+# Checks for library functions.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for working strtod" >&5
+$as_echo_n "checking for working strtod... " >&6; }
+if ${ac_cv_func_strtod+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if test "$cross_compiling" = yes; then :
+ ac_cv_func_strtod=no
+else
+ cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+$ac_includes_default
+#ifndef strtod
+double strtod ();
+#endif
+int
+main()
+{
+ {
+ /* Some versions of Linux strtod mis-parse strings with leading '+'. */
+ char *string = " +69";
+ char *term;
+ double value;
+ value = strtod (string, &term);
+ if (value != 69 || term != (string + 4))
+ return 1;
+ }
+
+ {
+ /* Under Solaris 2.4, strtod returns the wrong value for the
+ terminating character under some conditions. */
+ char *string = "NaN";
+ char *term;
+ strtod (string, &term);
+ if (term != string && *(term - 1) == 0)
+ return 1;
+ }
+ return 0;
+}
+
+_ACEOF
+if ac_fn_c_try_run "$LINENO"; then :
+ ac_cv_func_strtod=yes
+else
+ ac_cv_func_strtod=no
+fi
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext \
+ conftest.$ac_objext conftest.beam conftest.$ac_ext
+fi
+
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_func_strtod" >&5
+$as_echo "$ac_cv_func_strtod" >&6; }
+if test $ac_cv_func_strtod = no; then
+ case " $LIBOBJS " in
+ *" strtod.$ac_objext "* ) ;;
+ *) LIBOBJS="$LIBOBJS strtod.$ac_objext"
+ ;;
+esac
+
+ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow"
+if test "x$ac_cv_func_pow" = xyes; then :
+
+fi
+
+if test $ac_cv_func_pow = no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5
+$as_echo_n "checking for pow in -lm... " >&6; }
+if ${ac_cv_lib_m_pow+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pow ();
+int
+main ()
+{
+return pow ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_m_pow=yes
+else
+ ac_cv_lib_m_pow=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5
+$as_echo "$ac_cv_lib_m_pow" >&6; }
+if test "x$ac_cv_lib_m_pow" = xyes; then :
+ POW_LIB=-lm
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cannot find library containing definition of pow" >&5
+$as_echo "$as_me: WARNING: cannot find library containing definition of pow" >&2;}
+fi
+
+fi
+
+fi
+
+for ac_func in memset
+do :
+ ac_fn_c_check_func "$LINENO" "memset" "ac_cv_func_memset"
+if test "x$ac_cv_func_memset" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_MEMSET 1
+_ACEOF
+
+else
+ as_fn_error $? "memset not found in libc" "$LINENO" 5
+fi
+done
+
+for ac_func in pow
+do :
+ ac_fn_c_check_func "$LINENO" "pow" "ac_cv_func_pow"
+if test "x$ac_cv_func_pow" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_POW 1
+_ACEOF
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pow in -lm" >&5
+$as_echo_n "checking for pow in -lm... " >&6; }
+if ${ac_cv_lib_m_pow+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char pow ();
+int
+main ()
+{
+return pow ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_m_pow=yes
+else
+ ac_cv_lib_m_pow=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_pow" >&5
+$as_echo "$ac_cv_lib_m_pow" >&6; }
+if test "x$ac_cv_lib_m_pow" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBM 1
+_ACEOF
+
+ LIBS="-lm $LIBS"
+
+else
+ as_fn_error $? "cannot find pow" "$LINENO" 5
+fi
+
+fi
+done
+
+
+# Some later POSIX 1003.1 functions are required for test programs, failure here
+# is soft (the corresponding test program is not built).
+ac_fn_c_check_func "$LINENO" "clock_gettime" "ac_cv_func_clock_gettime"
+if test "x$ac_cv_func_clock_gettime" = xyes; then :
+
+else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: not building timepng" >&5
+$as_echo "$as_me: WARNING: not building timepng" >&2;}
+fi
+
+ if test "$ac_cv_func_clock_gettime" = "yes"; then
+ HAVE_CLOCK_GETTIME_TRUE=
+ HAVE_CLOCK_GETTIME_FALSE='#'
+else
+ HAVE_CLOCK_GETTIME_TRUE='#'
+ HAVE_CLOCK_GETTIME_FALSE=
+fi
+
+
+
+# Check whether --with-zlib-prefix was given.
+if test "${with_zlib_prefix+set}" = set; then :
+ withval=$with_zlib_prefix; ZPREFIX=${withval}
+else
+ ZPREFIX='z_'
+fi
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for zlibVersion in -lz" >&5
+$as_echo_n "checking for zlibVersion in -lz... " >&6; }
+if ${ac_cv_lib_z_zlibVersion+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lz $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char zlibVersion ();
+int
+main ()
+{
+return zlibVersion ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_z_zlibVersion=yes
+else
+ ac_cv_lib_z_zlibVersion=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_z_zlibVersion" >&5
+$as_echo "$ac_cv_lib_z_zlibVersion" >&6; }
+if test "x$ac_cv_lib_z_zlibVersion" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBZ 1
+_ACEOF
+
+ LIBS="-lz $LIBS"
+
+else
+ as_ac_Lib=`$as_echo "ac_cv_lib_z_${ZPREFIX}zlibVersion" | $as_tr_sh`
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ZPREFIX}zlibVersion in -lz" >&5
+$as_echo_n "checking for ${ZPREFIX}zlibVersion in -lz... " >&6; }
+if eval \${$as_ac_Lib+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lz $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char ${ZPREFIX}zlibVersion ();
+int
+main ()
+{
+return ${ZPREFIX}zlibVersion ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ eval "$as_ac_Lib=yes"
+else
+ eval "$as_ac_Lib=no"
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+eval ac_res=\$$as_ac_Lib
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_res" >&5
+$as_echo "$ac_res" >&6; }
+if eval test \"x\$"$as_ac_Lib"\" = x"yes"; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBZ 1
+_ACEOF
+
+ LIBS="-lz $LIBS"
+
+else
+ as_fn_error $? "zlib not installed" "$LINENO" 5
+fi
+
+fi
+
+
+# The following is for pngvalid, to ensure it catches FP errors even on
+# platforms that don't enable FP exceptions, the function appears in the math
+# library (typically), it's not an error if it is not found.
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for feenableexcept in -lm" >&5
+$as_echo_n "checking for feenableexcept in -lm... " >&6; }
+if ${ac_cv_lib_m_feenableexcept+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lm $LIBS"
+cat confdefs.h - <<_ACEOF >conftest.$ac_ext
+/* end confdefs.h. */
+
+/* Override any GCC internal prototype to avoid an error.
+ Use char because int might match the return type of a GCC
+ builtin and then its argument prototype would still apply. */
+#ifdef __cplusplus
+extern "C"
+#endif
+char feenableexcept ();
+int
+main ()
+{
+return feenableexcept ();
+ ;
+ return 0;
+}
+_ACEOF
+if ac_fn_c_try_link "$LINENO"; then :
+ ac_cv_lib_m_feenableexcept=yes
+else
+ ac_cv_lib_m_feenableexcept=no
+fi
+rm -f core conftest.err conftest.$ac_objext \
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_m_feenableexcept" >&5
+$as_echo "$ac_cv_lib_m_feenableexcept" >&6; }
+if test "x$ac_cv_lib_m_feenableexcept" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_LIBM 1
+_ACEOF
+
+ LIBS="-lm $LIBS"
+
+fi
+
+for ac_func in feenableexcept
+do :
+ ac_fn_c_check_func "$LINENO" "feenableexcept" "ac_cv_func_feenableexcept"
+if test "x$ac_cv_func_feenableexcept" = xyes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_FEENABLEEXCEPT 1
+_ACEOF
+
+fi
+done
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if using Solaris linker" >&5
+$as_echo_n "checking if using Solaris linker... " >&6; }
+SLD=`$LD --version 2>&1 | grep Solaris`
+if test "$SLD"; then
+ have_solaris_ld=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ have_solaris_ld=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+fi
+ if test "$have_solaris_ld" = "yes"; then
+ HAVE_SOLARIS_LD_TRUE=
+ HAVE_SOLARIS_LD_FALSE='#'
+else
+ HAVE_SOLARIS_LD_TRUE='#'
+ HAVE_SOLARIS_LD_FALSE=
+fi
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libraries can be versioned" >&5
+$as_echo_n "checking if libraries can be versioned... " >&6; }
+# Special case for PE/COFF platforms: ld reports
+# support for version-script, but doesn't actually
+# DO anything with it.
+case $host in
+*cygwin* | *mingw32* | *interix* )
+ have_ld_version_script=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+;;
+* )
+
+if test "$have_solaris_ld" = "yes"; then
+ GLD=`$LD --help < /dev/null 2>&1 | grep 'M mapfile'`
+else
+ GLD=`$LD --help < /dev/null 2>/dev/null | grep version-script`
+fi
+
+if test "$GLD"; then
+ have_ld_version_script=yes
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
+$as_echo "yes" >&6; }
+else
+ have_ld_version_script=no
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
+$as_echo "no" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: *** You have not enabled versioned symbols." >&5
+$as_echo "$as_me: WARNING: *** You have not enabled versioned symbols." >&2;}
+fi
+;;
+esac
+
+ if test "$have_ld_version_script" = "yes"; then
+ HAVE_LD_VERSION_SCRIPT_TRUE=
+ HAVE_LD_VERSION_SCRIPT_FALSE='#'
+else
+ HAVE_LD_VERSION_SCRIPT_TRUE='#'
+ HAVE_LD_VERSION_SCRIPT_FALSE=
+fi
+
+
+if test "$have_ld_version_script" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for symbol prefix" >&5
+$as_echo_n "checking for symbol prefix... " >&6; }
+ SYMBOL_PREFIX=`echo "PREFIX=__USER_LABEL_PREFIX__" \
+ | ${CPP-${CC-gcc} -E} - 2>&1 \
+ | ${EGREP-grep} "^PREFIX=" \
+ | ${SED-sed} -e "s:^PREFIX=::" -e "s:__USER_LABEL_PREFIX__::"`
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $SYMBOL_PREFIX" >&5
+$as_echo "$SYMBOL_PREFIX" >&6; }
+fi
+
+# Substitutions for .in files
+
+
+
+
+
+# Additional arguments (and substitutions)
+# Allow the pkg-config directory to be set
+
+# Check whether --with-pkgconfigdir was given.
+if test "${with_pkgconfigdir+set}" = set; then :
+ withval=$with_pkgconfigdir; pkgconfigdir=${withval}
+else
+ pkgconfigdir='${libdir}/pkgconfig'
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: pkgconfig directory is ${pkgconfigdir}" >&5
+$as_echo "$as_me: pkgconfig directory is ${pkgconfigdir}" >&6;}
+
+# Make the *-config binary config scripts optional
+
+# Check whether --with-binconfigs was given.
+if test "${with_binconfigs+set}" = set; then :
+ withval=$with_binconfigs; if test "${withval}" = no; then
+ binconfigs=
+ { $as_echo "$as_me:${as_lineno-$LINENO}: libpng-config scripts will not be built" >&5
+$as_echo "$as_me: libpng-config scripts will not be built" >&6;}
+ else
+ binconfigs='${binconfigs}'
+ fi
+else
+ binconfigs='${binconfigs}'
+fi
+
+
+
+# Support for prefixes to the API function names; this will generate defines
+# at the start of the build to rename exported library functions
+
+# Check whether --with-libpng-prefix was given.
+if test "${with_libpng_prefix+set}" = set; then :
+ withval=$with_libpng_prefix; if test "${withval:-no}" != "no"; then
+ PNG_PREFIX=${withval}
+
+ fi
+fi
+
+ if test "${with_libpng_prefix:-no}" != "no"; then
+ DO_PNG_PREFIX_TRUE=
+ DO_PNG_PREFIX_FALSE='#'
+else
+ DO_PNG_PREFIX_TRUE='#'
+ DO_PNG_PREFIX_FALSE=
+fi
+
+
+# Control over what links are made for installed files. Versioned files are
+# always installed, when the following options are turned on corresponding
+# unversioned links are also created (normally as symbolic links):
+# Check whether --enable-unversioned-links was given.
+if test "${enable_unversioned_links+set}" = set; then :
+ enableval=$enable_unversioned_links;
+fi
+
+
+# The AM_CONDITIONAL test is written so that the default is enabled;
+# --disable-unversioned-links must be given to turn the option off.
+ if test "$enable_unversioned_links" != "no"; then
+ DO_INSTALL_LINKS_TRUE=
+ DO_INSTALL_LINKS_FALSE='#'
+else
+ DO_INSTALL_LINKS_TRUE='#'
+ DO_INSTALL_LINKS_FALSE=
+fi
+
+
+# Check whether --enable-unversioned-libpng-pc was given.
+if test "${enable_unversioned_libpng_pc+set}" = set; then :
+ enableval=$enable_unversioned_libpng_pc;
+fi
+
+ if test "$enable_unversioned_libpng_pc" != "no"; then
+ DO_INSTALL_LIBPNG_PC_TRUE=
+ DO_INSTALL_LIBPNG_PC_FALSE='#'
+else
+ DO_INSTALL_LIBPNG_PC_TRUE='#'
+ DO_INSTALL_LIBPNG_PC_FALSE=
+fi
+
+
+# Check whether --enable-unversioned-libpng-config was given.
+if test "${enable_unversioned_libpng_config+set}" = set; then :
+ enableval=$enable_unversioned_libpng_config;
+fi
+
+ if test "$enable_unversioned_libpng_config" != "no"; then
+ DO_INSTALL_LIBPNG_CONFIG_TRUE=
+ DO_INSTALL_LIBPNG_CONFIG_FALSE='#'
+else
+ DO_INSTALL_LIBPNG_CONFIG_TRUE='#'
+ DO_INSTALL_LIBPNG_CONFIG_FALSE=
+fi
+
+
+# HOST SPECIFIC OPTIONS
+# =====================
+#
+# DEFAULT
+# =======
+#
+# Check whether --enable-hardware-optimizations was given.
+if test "${enable_hardware_optimizations+set}" = set; then :
+ enableval=$enable_hardware_optimizations; case "$enableval" in
+ no|off)
+ # disable hardware optimization on all systems:
+ enable_arm_neon=no
+
+$as_echo "#define PNG_ARM_NEON_OPT 0" >>confdefs.h
+
+ enable_mips_msa=no
+
+$as_echo "#define PNG_MIPS_MSA_OPT 0" >>confdefs.h
+
+ enable_powerpc_vsx=no
+
+$as_echo "#define PNG_POWERPC_VSX_OPT 0" >>confdefs.h
+
+ enable_intel_sse=no
+
+$as_echo "#define PNG_INTEL_SSE_OPT 0" >>confdefs.h
+
+ ;;
+ *)
+ # allow enabling hardware optimization on any system:
+ case "$host_cpu" in
+ arm*|aarch64*)
+ enable_arm_neon=yes
+
+$as_echo "#define PNG_ARM_NEON_OPT 0" >>confdefs.h
+
+ ;;
+ mipsel*|mips64el*)
+ enable_mips_msa=yes
+
+$as_echo "#define PNG_MIPS_MSA_OPT 0" >>confdefs.h
+
+ ;;
+ i?86|x86_64)
+ enable_intel_sse=yes
+
+$as_echo "#define PNG_INTEL_SSE_OPT 1" >>confdefs.h
+
+ ;;
+ powerpc*|ppc64*)
+ enable_powerpc_vsx=yes
+
+$as_echo "#define PNG_POWERPC_VSX_OPT 2" >>confdefs.h
+
+ ;;
+ esac
+ ;;
+ esac
+fi
+
+
+# ARM
+# ===
+#
+# ARM NEON (SIMD) support.
+
+# Check whether --enable-arm-neon was given.
+if test "${enable_arm_neon+set}" = set; then :
+ enableval=$enable_arm_neon; case "$enableval" in
+ no|off)
+ # disable the default enabling on __ARM_NEON__ systems:
+
+$as_echo "#define PNG_ARM_NEON_OPT 0" >>confdefs.h
+
+ # Prevent inclusion of the assembler files below:
+ enable_arm_neon=no;;
+ check)
+
+$as_echo "#define PNG_ARM_NEON_CHECK_SUPPORTED /**/" >>confdefs.h
+;;
+ api)
+
+$as_echo "#define PNG_ARM_NEON_API_SUPPORTED /**/" >>confdefs.h
+;;
+ yes|on)
+
+$as_echo "#define PNG_ARM_NEON_OPT 2" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-arm-neon: please specify 'check' or 'api', if
+ you want the optimizations unconditionally pass -mfpu=neon
+ to the compiler." >&5
+$as_echo "$as_me: WARNING: --enable-arm-neon: please specify 'check' or 'api', if
+ you want the optimizations unconditionally pass -mfpu=neon
+ to the compiler." >&2;};;
+ *)
+ as_fn_error $? "--enable-arm-neon=${enable_arm_neon}: invalid value" "$LINENO" 5
+ esac
+fi
+
+
+# Add ARM specific files to all builds where the host_cpu is arm ('arm*') or
+# where ARM optimizations were explicitly requested (this allows a fallback if a
+# future host CPU does not match 'arm*')
+
+ if test "$enable_arm_neon" != 'no' &&
+ case "$host_cpu" in
+ arm*|aarch64*) :;;
+ *) test "$enable_arm_neon" != '';;
+ esac; then
+ PNG_ARM_NEON_TRUE=
+ PNG_ARM_NEON_FALSE='#'
+else
+ PNG_ARM_NEON_TRUE='#'
+ PNG_ARM_NEON_FALSE=
+fi
+
+
+# MIPS
+# ===
+#
+# MIPS MSA (SIMD) support.
+
+# Check whether --enable-mips-msa was given.
+if test "${enable_mips_msa+set}" = set; then :
+ enableval=$enable_mips_msa; case "$enableval" in
+ no|off)
+ # disable the default enabling on __mips_msa systems:
+
+$as_echo "#define PNG_MIPS_MSA_OPT 0" >>confdefs.h
+
+ # Prevent inclusion of the assembler files below:
+ enable_mips_msa=no;;
+ check)
+
+$as_echo "#define PNG_MIPS_MSA_CHECK_SUPPORTED /**/" >>confdefs.h
+;;
+ api)
+
+$as_echo "#define PNG_MIPS_MSA_API_SUPPORTED /**/" >>confdefs.h
+;;
+ yes|on)
+
+$as_echo "#define PNG_MIPS_MSA_OPT 2" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-mips-msa: please specify 'check' or 'api', if
+ you want the optimizations unconditionally pass '-mmsa -mfp64'
+ to the compiler." >&5
+$as_echo "$as_me: WARNING: --enable-mips-msa: please specify 'check' or 'api', if
+ you want the optimizations unconditionally pass '-mmsa -mfp64'
+ to the compiler." >&2;};;
+ *)
+ as_fn_error $? "--enable-mips-msa=${enable_mips_msa}: invalid value" "$LINENO" 5
+ esac
+fi
+
+
+# Add MIPS specific files to all builds where the host_cpu is mips ('mips*') or
+# where MIPS optimizations were explicitly requested (this allows a fallback if a
+# future host CPU does not match 'mips*')
+
+ if test "$enable_mips_msa" != 'no' &&
+ case "$host_cpu" in
+ mipsel*|mips64el*) :;;
+ esac; then
+ PNG_MIPS_MSA_TRUE=
+ PNG_MIPS_MSA_FALSE='#'
+else
+ PNG_MIPS_MSA_TRUE='#'
+ PNG_MIPS_MSA_FALSE=
+fi
+
+
+# INTEL
+# =====
+#
+# INTEL SSE (SIMD) support.
+
+# Check whether --enable-intel-sse was given.
+if test "${enable_intel_sse+set}" = set; then :
+ enableval=$enable_intel_sse; case "$enableval" in
+ no|off)
+ # disable the default enabling:
+
+$as_echo "#define PNG_INTEL_SSE_OPT 0" >>confdefs.h
+
+ # Prevent inclusion of the assembler files below:
+ enable_intel_sse=no;;
+ yes|on)
+
+$as_echo "#define PNG_INTEL_SSE_OPT 1" >>confdefs.h
+;;
+ *)
+ as_fn_error $? "--enable-intel-sse=${enable_intel_sse}: invalid value" "$LINENO" 5
+ esac
+fi
+
+
+# Add Intel specific files to all builds where the host_cpu is Intel ('x86*')
+# or where Intel optimizations were explicitly requested (this allows a
+# fallback if a future host CPU does not match 'x86*')
+ if test "$enable_intel_sse" != 'no' &&
+ case "$host_cpu" in
+ i?86|x86_64) :;;
+ *) test "$enable_intel_sse" != '';;
+ esac; then
+ PNG_INTEL_SSE_TRUE=
+ PNG_INTEL_SSE_FALSE='#'
+else
+ PNG_INTEL_SSE_TRUE='#'
+ PNG_INTEL_SSE_FALSE=
+fi
+
+
+# PowerPC
+# ===
+#
+# PowerPC VSX (SIMD) support.
+
+# Check whether --enable-powerpc-vsx was given.
+if test "${enable_powerpc_vsx+set}" = set; then :
+ enableval=$enable_powerpc_vsx; case "$enableval" in
+ no|off)
+ # disable the default enabling on __ppc64__ systems:
+
+$as_echo "#define PNG_POWERPC_VSX_OPT 0" >>confdefs.h
+
+ # Prevent inclusion of the platform specific files below:
+ enable_powerpc_vsx=no;;
+ check)
+
+$as_echo "#define PNG_POWERPC_VSX_CHECK_SUPPORTED /**/" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-powerpc-vsx Please check contrib/powerpc/README file
+ for the list of supported OSes." >&5
+$as_echo "$as_me: WARNING: --enable-powerpc-vsx Please check contrib/powerpc/README file
+ for the list of supported OSes." >&2;};;
+ api)
+
+$as_echo "#define PNG_POWERPC_VSX_API_SUPPORTED /**/" >>confdefs.h
+;;
+ yes|on)
+
+$as_echo "#define PNG_POWERPC_VSX_OPT 2" >>confdefs.h
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-powerpc-vsx: please specify 'check' or 'api', if
+ you want the optimizations unconditionally pass '-maltivec -mvsx'
+ or '-mcpu=power8'to the compiler." >&5
+$as_echo "$as_me: WARNING: --enable-powerpc-vsx: please specify 'check' or 'api', if
+ you want the optimizations unconditionally pass '-maltivec -mvsx'
+ or '-mcpu=power8'to the compiler." >&2;};;
+ *)
+ as_fn_error $? "--enable-powerpc-vsx=${enable_powerpc_vsx}: invalid value" "$LINENO" 5
+ esac
+fi
+
+
+# Add PowerPC specific files to all builds where the host_cpu is powerpc('powerpc*') or
+# where POWERPC optimizations were explicitly requested (this allows a fallback if a
+# future host CPU does not match 'powerpc*')
+
+ if test "$enable_powerpc_vsx" != 'no' &&
+ case "$host_cpu" in
+ powerpc*|ppc64*) :;;
+ esac; then
+ PNG_POWERPC_VSX_TRUE=
+ PNG_POWERPC_VSX_FALSE='#'
+else
+ PNG_POWERPC_VSX_TRUE='#'
+ PNG_POWERPC_VSX_FALSE=
+fi
+
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: Extra options for compiler: $PNG_COPTS" >&5
+$as_echo "$as_me: Extra options for compiler: $PNG_COPTS" >&6;}
+
+# Config files, substituting as above
+ac_config_files="$ac_config_files Makefile libpng.pc:libpng.pc.in"
+
+ac_config_files="$ac_config_files libpng-config:libpng-config.in"
+
+
+cat >confcache <<\_ACEOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs, see configure's option --config-cache.
+# It is not useful on other systems. If it contains results you don't
+# want to keep, you may remove or edit it.
+#
+# config.status only pays attention to the cache file if you give it
+# the --recheck option to rerun configure.
+#
+# `ac_cv_env_foo' variables (set or unset) will be overridden when
+# loading this file, other *unset* `ac_cv_foo' will be assigned the
+# following values.
+
+_ACEOF
+
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, we kill variables containing newlines.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(
+ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+ eval ac_val=\$$ac_var
+ case $ac_val in #(
+ *${as_nl}*)
+ case $ac_var in #(
+ *_cv_*) { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: cache variable $ac_var contains a newline" >&5
+$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;;
+ esac
+ case $ac_var in #(
+ _ | IFS | as_nl) ;; #(
+ BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #(
+ *) { eval $ac_var=; unset $ac_var;} ;;
+ esac ;;
+ esac
+ done
+
+ (set) 2>&1 |
+ case $as_nl`(ac_space=' '; set) 2>&1` in #(
+ *${as_nl}ac_space=\ *)
+ # `set' does not quote correctly, so add quotes: double-quote
+ # substitution turns \\\\ into \\, and sed turns \\ into \.
+ sed -n \
+ "s/'/'\\\\''/g;
+ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
+ ;; #(
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
+ ;;
+ esac |
+ sort
+) |
+ sed '
+ /^ac_cv_env_/b end
+ t clear
+ :clear
+ s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
+ t end
+ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+ :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+ if test -w "$cache_file"; then
+ if test "x$cache_file" != "x/dev/null"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: updating cache $cache_file" >&5
+$as_echo "$as_me: updating cache $cache_file" >&6;}
+ if test ! -f "$cache_file" || test -h "$cache_file"; then
+ cat confcache >"$cache_file"
+ else
+ case $cache_file in #(
+ */* | ?:*)
+ mv -f confcache "$cache_file"$$ &&
+ mv -f "$cache_file"$$ "$cache_file" ;; #(
+ *)
+ mv -f confcache "$cache_file" ;;
+ esac
+ fi
+ fi
+ else
+ { $as_echo "$as_me:${as_lineno-$LINENO}: not updating unwritable cache $cache_file" >&5
+$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;}
+ fi
+fi
+rm -f confcache
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+DEFS=-DHAVE_CONFIG_H
+
+ac_libobjs=
+ac_ltlibobjs=
+U=
+for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
+ # 1. Remove the extension, and $U if already installed.
+ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+ ac_i=`$as_echo "$ac_i" | sed "$ac_script"`
+ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
+ # will be set to the directory where LIBOBJS objects are built.
+ as_fn_append ac_libobjs " \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+ as_fn_append ac_ltlibobjs " \${LIBOBJDIR}$ac_i"'$U.lo'
+done
+LIBOBJS=$ac_libobjs
+
+LTLIBOBJS=$ac_ltlibobjs
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking that generated files are newer than configure" >&5
+$as_echo_n "checking that generated files are newer than configure... " >&6; }
+ if test -n "$am_sleep_pid"; then
+ # Hide warnings about reused PIDs.
+ wait $am_sleep_pid 2>/dev/null
+ fi
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: done" >&5
+$as_echo "done" >&6; }
+ if test -n "$EXEEXT"; then
+ am__EXEEXT_TRUE=
+ am__EXEEXT_FALSE='#'
+else
+ am__EXEEXT_TRUE='#'
+ am__EXEEXT_FALSE=
+fi
+
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error $? "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
+ as_fn_error $? "conditional \"AMDEP\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${am__fastdepCCAS_TRUE}" && test -z "${am__fastdepCCAS_FALSE}"; then
+ as_fn_error $? "conditional \"am__fastdepCCAS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_CLOCK_GETTIME_TRUE}" && test -z "${HAVE_CLOCK_GETTIME_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_CLOCK_GETTIME\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_SOLARIS_LD_TRUE}" && test -z "${HAVE_SOLARIS_LD_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_SOLARIS_LD\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${HAVE_LD_VERSION_SCRIPT_TRUE}" && test -z "${HAVE_LD_VERSION_SCRIPT_FALSE}"; then
+ as_fn_error $? "conditional \"HAVE_LD_VERSION_SCRIPT\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DO_PNG_PREFIX_TRUE}" && test -z "${DO_PNG_PREFIX_FALSE}"; then
+ as_fn_error $? "conditional \"DO_PNG_PREFIX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DO_INSTALL_LINKS_TRUE}" && test -z "${DO_INSTALL_LINKS_FALSE}"; then
+ as_fn_error $? "conditional \"DO_INSTALL_LINKS\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DO_INSTALL_LIBPNG_PC_TRUE}" && test -z "${DO_INSTALL_LIBPNG_PC_FALSE}"; then
+ as_fn_error $? "conditional \"DO_INSTALL_LIBPNG_PC\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${DO_INSTALL_LIBPNG_CONFIG_TRUE}" && test -z "${DO_INSTALL_LIBPNG_CONFIG_FALSE}"; then
+ as_fn_error $? "conditional \"DO_INSTALL_LIBPNG_CONFIG\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${PNG_ARM_NEON_TRUE}" && test -z "${PNG_ARM_NEON_FALSE}"; then
+ as_fn_error $? "conditional \"PNG_ARM_NEON\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${PNG_MIPS_MSA_TRUE}" && test -z "${PNG_MIPS_MSA_FALSE}"; then
+ as_fn_error $? "conditional \"PNG_MIPS_MSA\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${PNG_INTEL_SSE_TRUE}" && test -z "${PNG_INTEL_SSE_FALSE}"; then
+ as_fn_error $? "conditional \"PNG_INTEL_SSE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+if test -z "${PNG_POWERPC_VSX_TRUE}" && test -z "${PNG_POWERPC_VSX_FALSE}"; then
+ as_fn_error $? "conditional \"PNG_POWERPC_VSX\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
+
+: "${CONFIG_STATUS=./config.status}"
+ac_write_fail=0
+ac_clean_files_save=$ac_clean_files
+ac_clean_files="$ac_clean_files $CONFIG_STATUS"
+{ $as_echo "$as_me:${as_lineno-$LINENO}: creating $CONFIG_STATUS" >&5
+$as_echo "$as_me: creating $CONFIG_STATUS" >&6;}
+as_write_fail=0
+cat >$CONFIG_STATUS <<_ASEOF || as_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+# Run this file to recreate the current configuration.
+# Compiler output produced by configure, useful for debugging
+# configure, is in config.log if it exists.
+
+debug=false
+ac_cs_recheck=false
+ac_cs_silent=false
+
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$CONFIG_STATUS <<\_ASEOF || as_write_fail=1
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+
+# as_fn_error STATUS ERROR [LINENO LOG_FD]
+# ----------------------------------------
+# Output "`basename $0`: error: ERROR" to stderr. If LINENO and LOG_FD are
+# provided, also output the error to LOG_FD, referencing LINENO. Then exit the
+# script with STATUS, using 1 if that was 0.
+as_fn_error ()
+{
+ as_status=$1; test $as_status -eq 0 && as_status=1
+ if test "$4"; then
+ as_lineno=${as_lineno-"$3"} as_lineno_stack=as_lineno_stack=$as_lineno_stack
+ $as_echo "$as_me:${as_lineno-$LINENO}: error: $2" >&$4
+ fi
+ $as_echo "$as_me: error: $2" >&2
+ as_fn_exit $as_status
+} # as_fn_error
+
+
+# as_fn_set_status STATUS
+# -----------------------
+# Set $? to STATUS, without forking.
+as_fn_set_status ()
+{
+ return $1
+} # as_fn_set_status
+
+# as_fn_exit STATUS
+# -----------------
+# Exit the shell with STATUS, even in a "trap 0" or "set -e" context.
+as_fn_exit ()
+{
+ set +e
+ as_fn_set_status $1
+ exit $1
+} # as_fn_exit
+
+# as_fn_unset VAR
+# ---------------
+# Portably unset VAR.
+as_fn_unset ()
+{
+ { eval $1=; unset $1;}
+}
+as_unset=as_fn_unset
+# as_fn_append VAR VALUE
+# ----------------------
+# Append the text in VALUE to the end of the definition contained in VAR. Take
+# advantage of any shell optimizations that allow amortized linear growth over
+# repeated appends, instead of the typical quadratic growth present in naive
+# implementations.
+if (eval "as_var=1; as_var+=2; test x\$as_var = x12") 2>/dev/null; then :
+ eval 'as_fn_append ()
+ {
+ eval $1+=\$2
+ }'
+else
+ as_fn_append ()
+ {
+ eval $1=\$$1\$2
+ }
+fi # as_fn_append
+
+# as_fn_arith ARG...
+# ------------------
+# Perform arithmetic evaluation on the ARGs, and store the result in the
+# global $as_val. Take advantage of shells that can avoid forks. The arguments
+# must be portable across $(()) and expr.
+if (eval "test \$(( 1 + 1 )) = 2") 2>/dev/null; then :
+ eval 'as_fn_arith ()
+ {
+ as_val=$(( $* ))
+ }'
+else
+ as_fn_arith ()
+ {
+ as_val=`expr "$@" || test $? -eq 1`
+ }
+fi # as_fn_arith
+
+
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+ test "X`expr 00001 : '.*\(...\)'`" = X001; then
+ as_expr=expr
+else
+ as_expr=false
+fi
+
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
+ as_basename=basename
+else
+ as_basename=false
+fi
+
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+ as_dirname=dirname
+else
+ as_dirname=false
+fi
+
+as_me=`$as_basename -- "$0" ||
+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$0" : 'X\(//\)$' \| \
+ X"$0" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$0" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in #(((((
+-n*)
+ case `echo 'xy\c'` in
+ *c*) ECHO_T=' ';; # ECHO_T is single tab character.
+ xy) ECHO_C='\c';;
+ *) echo `echo ksh88 bug on AIX 6.1` > /dev/null
+ ECHO_T=' ';;
+ esac;;
+*)
+ ECHO_N='-n';;
+esac
+
+rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+ rm -f conf$$.dir/conf$$.file
+else
+ rm -f conf$$.dir
+ mkdir conf$$.dir 2>/dev/null
+fi
+if (echo >conf$$.file) 2>/dev/null; then
+ if ln -s conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s='ln -s'
+ # ... but there are two gotchas:
+ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+ # In both cases, we have to default to `cp -pR'.
+ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
+ as_ln_s='cp -pR'
+ elif ln conf$$.file conf$$ 2>/dev/null; then
+ as_ln_s=ln
+ else
+ as_ln_s='cp -pR'
+ fi
+else
+ as_ln_s='cp -pR'
+fi
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
+
+
+# as_fn_mkdir_p
+# -------------
+# Create "$as_dir" as a directory, including parents if necessary.
+as_fn_mkdir_p ()
+{
+
+ case $as_dir in #(
+ -*) as_dir=./$as_dir;;
+ esac
+ test -d "$as_dir" || eval $as_mkdir_p || {
+ as_dirs=
+ while :; do
+ case $as_dir in #(
+ *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'(
+ *) as_qdir=$as_dir;;
+ esac
+ as_dirs="'$as_qdir' $as_dirs"
+ as_dir=`$as_dirname -- "$as_dir" ||
+$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$as_dir" : 'X\(//\)[^/]' \| \
+ X"$as_dir" : 'X\(//\)$' \| \
+ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$as_dir" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ test -d "$as_dir" && break
+ done
+ test -z "$as_dirs" || eval "mkdir $as_dirs"
+ } || test -d "$as_dir" || as_fn_error $? "cannot create directory $as_dir"
+
+
+} # as_fn_mkdir_p
+if mkdir -p . 2>/dev/null; then
+ as_mkdir_p='mkdir -p "$as_dir"'
+else
+ test -d ./-p && rmdir ./-p
+ as_mkdir_p=false
+fi
+
+
+# as_fn_executable_p FILE
+# -----------------------
+# Test if FILE is an executable regular file.
+as_fn_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+} # as_fn_executable_p
+as_test_x='test -x'
+as_executable_p=as_fn_executable_p
+
+# Sed expression to map a string onto a valid CPP name.
+as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
+
+# Sed expression to map a string onto a valid variable name.
+as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
+
+
+exec 6>&1
+## ----------------------------------- ##
+## Main body of $CONFIG_STATUS script. ##
+## ----------------------------------- ##
+_ASEOF
+test $as_write_fail = 0 && chmod +x $CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# Save the log message, to keep $0 and so on meaningful, and to
+# report actual input values of CONFIG_FILES etc. instead of their
+# values after options handling.
+ac_log="
+This file was extended by libpng $as_me 1.6.35, which was
+generated by GNU Autoconf 2.69. Invocation command line was
+
+ CONFIG_FILES = $CONFIG_FILES
+ CONFIG_HEADERS = $CONFIG_HEADERS
+ CONFIG_LINKS = $CONFIG_LINKS
+ CONFIG_COMMANDS = $CONFIG_COMMANDS
+ $ $0 $@
+
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
+_ACEOF
+
+case $ac_config_files in *"
+"*) set x $ac_config_files; shift; ac_config_files=$*;;
+esac
+
+case $ac_config_headers in *"
+"*) set x $ac_config_headers; shift; ac_config_headers=$*;;
+esac
+
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+# Files that config.status was made for.
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ac_cs_usage="\
+\`$as_me' instantiates files and other configuration actions
+from templates according to the current configuration. Unless the files
+and actions are specified as TAGs, all are instantiated by default.
+
+Usage: $0 [OPTION]... [TAG]...
+
+ -h, --help print this help, then exit
+ -V, --version print version number and configuration settings, then exit
+ --config print configuration, then exit
+ -q, --quiet, --silent
+ do not print progress messages
+ -d, --debug don't remove temporary files
+ --recheck update $as_me by reconfiguring in the same conditions
+ --file=FILE[:TEMPLATE]
+ instantiate the configuration file FILE
+ --header=FILE[:TEMPLATE]
+ instantiate the configuration header FILE
+
+Configuration files:
+$config_files
+
+Configuration headers:
+$config_headers
+
+Configuration commands:
+$config_commands
+
+Report bugs to <png-mng-implement@lists.sourceforge.net>."
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`"
+ac_cs_version="\\
+libpng config.status 1.6.35
+configured by $0, generated by GNU Autoconf 2.69,
+ with options \\"\$ac_cs_config\\"
+
+Copyright (C) 2012 Free Software Foundation, Inc.
+This config.status script is free software; the Free Software Foundation
+gives unlimited permission to copy, distribute and modify it."
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
+MKDIR_P='$MKDIR_P'
+AWK='$AWK'
+test -n "\$AWK" || AWK=awk
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# The default lists apply if the user does not specify any file.
+ac_need_defaults=:
+while test $# != 0
+do
+ case $1 in
+ --*=?*)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
+ ac_shift=:
+ ;;
+ --*=)
+ ac_option=`expr "X$1" : 'X\([^=]*\)='`
+ ac_optarg=
+ ac_shift=:
+ ;;
+ *)
+ ac_option=$1
+ ac_optarg=$2
+ ac_shift=shift
+ ;;
+ esac
+
+ case $ac_option in
+ # Handling of the options.
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ ac_cs_recheck=: ;;
+ --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+ $as_echo "$ac_cs_version"; exit ;;
+ --config | --confi | --conf | --con | --co | --c )
+ $as_echo "$ac_cs_config"; exit ;;
+ --debug | --debu | --deb | --de | --d | -d )
+ debug=: ;;
+ --file | --fil | --fi | --f )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ '') as_fn_error $? "missing file argument" ;;
+ esac
+ as_fn_append CONFIG_FILES " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --header | --heade | --head | --hea )
+ $ac_shift
+ case $ac_optarg in
+ *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;;
+ esac
+ as_fn_append CONFIG_HEADERS " '$ac_optarg'"
+ ac_need_defaults=false;;
+ --he | --h)
+ # Conflict between --help and --header
+ as_fn_error $? "ambiguous option: \`$1'
+Try \`$0 --help' for more information.";;
+ --help | --hel | -h )
+ $as_echo "$ac_cs_usage"; exit ;;
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil | --si | --s)
+ ac_cs_silent=: ;;
+
+ # This is an error.
+ -*) as_fn_error $? "unrecognized option: \`$1'
+Try \`$0 --help' for more information." ;;
+
+ *) as_fn_append ac_config_targets " $1"
+ ac_need_defaults=false ;;
+
+ esac
+ shift
+done
+
+ac_configure_extra_args=
+
+if $ac_cs_silent; then
+ exec 6>/dev/null
+ ac_configure_extra_args="$ac_configure_extra_args --silent"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+if \$ac_cs_recheck; then
+ set X $SHELL '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+ shift
+ \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6
+ CONFIG_SHELL='$SHELL'
+ export CONFIG_SHELL
+ exec "\$@"
+fi
+
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+exec 5>>config.log
+{
+ echo
+ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+ $as_echo "$ac_log"
+} >&5
+
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+#
+# INIT-COMMANDS
+#
+AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
+
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+SED='`$ECHO "$SED" | $SED "$delay_single_quote_subst"`'
+Xsed='`$ECHO "$Xsed" | $SED "$delay_single_quote_subst"`'
+GREP='`$ECHO "$GREP" | $SED "$delay_single_quote_subst"`'
+EGREP='`$ECHO "$EGREP" | $SED "$delay_single_quote_subst"`'
+FGREP='`$ECHO "$FGREP" | $SED "$delay_single_quote_subst"`'
+SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
+ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
+LD='`$ECHO "$LD" | $SED "$delay_single_quote_subst"`'
+macro_version='`$ECHO "$macro_version" | $SED "$delay_single_quote_subst"`'
+macro_revision='`$ECHO "$macro_revision" | $SED "$delay_single_quote_subst"`'
+AS='`$ECHO "$AS" | $SED "$delay_single_quote_subst"`'
+DLLTOOL='`$ECHO "$DLLTOOL" | $SED "$delay_single_quote_subst"`'
+OBJDUMP='`$ECHO "$OBJDUMP" | $SED "$delay_single_quote_subst"`'
+enable_shared='`$ECHO "$enable_shared" | $SED "$delay_single_quote_subst"`'
+enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
+pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
+enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
+PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
+host_alias='`$ECHO "$host_alias" | $SED "$delay_single_quote_subst"`'
+host='`$ECHO "$host" | $SED "$delay_single_quote_subst"`'
+host_os='`$ECHO "$host_os" | $SED "$delay_single_quote_subst"`'
+build_alias='`$ECHO "$build_alias" | $SED "$delay_single_quote_subst"`'
+build='`$ECHO "$build" | $SED "$delay_single_quote_subst"`'
+build_os='`$ECHO "$build_os" | $SED "$delay_single_quote_subst"`'
+NM='`$ECHO "$NM" | $SED "$delay_single_quote_subst"`'
+LN_S='`$ECHO "$LN_S" | $SED "$delay_single_quote_subst"`'
+max_cmd_len='`$ECHO "$max_cmd_len" | $SED "$delay_single_quote_subst"`'
+ac_objext='`$ECHO "$ac_objext" | $SED "$delay_single_quote_subst"`'
+exeext='`$ECHO "$exeext" | $SED "$delay_single_quote_subst"`'
+lt_unset='`$ECHO "$lt_unset" | $SED "$delay_single_quote_subst"`'
+lt_SP2NL='`$ECHO "$lt_SP2NL" | $SED "$delay_single_quote_subst"`'
+lt_NL2SP='`$ECHO "$lt_NL2SP" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_host_file_cmd='`$ECHO "$lt_cv_to_host_file_cmd" | $SED "$delay_single_quote_subst"`'
+lt_cv_to_tool_file_cmd='`$ECHO "$lt_cv_to_tool_file_cmd" | $SED "$delay_single_quote_subst"`'
+reload_flag='`$ECHO "$reload_flag" | $SED "$delay_single_quote_subst"`'
+reload_cmds='`$ECHO "$reload_cmds" | $SED "$delay_single_quote_subst"`'
+deplibs_check_method='`$ECHO "$deplibs_check_method" | $SED "$delay_single_quote_subst"`'
+file_magic_cmd='`$ECHO "$file_magic_cmd" | $SED "$delay_single_quote_subst"`'
+file_magic_glob='`$ECHO "$file_magic_glob" | $SED "$delay_single_quote_subst"`'
+want_nocaseglob='`$ECHO "$want_nocaseglob" | $SED "$delay_single_quote_subst"`'
+sharedlib_from_linklib_cmd='`$ECHO "$sharedlib_from_linklib_cmd" | $SED "$delay_single_quote_subst"`'
+AR='`$ECHO "$AR" | $SED "$delay_single_quote_subst"`'
+AR_FLAGS='`$ECHO "$AR_FLAGS" | $SED "$delay_single_quote_subst"`'
+archiver_list_spec='`$ECHO "$archiver_list_spec" | $SED "$delay_single_quote_subst"`'
+STRIP='`$ECHO "$STRIP" | $SED "$delay_single_quote_subst"`'
+RANLIB='`$ECHO "$RANLIB" | $SED "$delay_single_quote_subst"`'
+old_postinstall_cmds='`$ECHO "$old_postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_postuninstall_cmds='`$ECHO "$old_postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_cmds='`$ECHO "$old_archive_cmds" | $SED "$delay_single_quote_subst"`'
+lock_old_archive_extraction='`$ECHO "$lock_old_archive_extraction" | $SED "$delay_single_quote_subst"`'
+CC='`$ECHO "$CC" | $SED "$delay_single_quote_subst"`'
+CFLAGS='`$ECHO "$CFLAGS" | $SED "$delay_single_quote_subst"`'
+compiler='`$ECHO "$compiler" | $SED "$delay_single_quote_subst"`'
+GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
+nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
+lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
+objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
+MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_pic='`$ECHO "$lt_prog_compiler_pic" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_wl='`$ECHO "$lt_prog_compiler_wl" | $SED "$delay_single_quote_subst"`'
+lt_prog_compiler_static='`$ECHO "$lt_prog_compiler_static" | $SED "$delay_single_quote_subst"`'
+lt_cv_prog_compiler_c_o='`$ECHO "$lt_cv_prog_compiler_c_o" | $SED "$delay_single_quote_subst"`'
+need_locks='`$ECHO "$need_locks" | $SED "$delay_single_quote_subst"`'
+MANIFEST_TOOL='`$ECHO "$MANIFEST_TOOL" | $SED "$delay_single_quote_subst"`'
+DSYMUTIL='`$ECHO "$DSYMUTIL" | $SED "$delay_single_quote_subst"`'
+NMEDIT='`$ECHO "$NMEDIT" | $SED "$delay_single_quote_subst"`'
+LIPO='`$ECHO "$LIPO" | $SED "$delay_single_quote_subst"`'
+OTOOL='`$ECHO "$OTOOL" | $SED "$delay_single_quote_subst"`'
+OTOOL64='`$ECHO "$OTOOL64" | $SED "$delay_single_quote_subst"`'
+libext='`$ECHO "$libext" | $SED "$delay_single_quote_subst"`'
+shrext_cmds='`$ECHO "$shrext_cmds" | $SED "$delay_single_quote_subst"`'
+extract_expsyms_cmds='`$ECHO "$extract_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds_need_lc='`$ECHO "$archive_cmds_need_lc" | $SED "$delay_single_quote_subst"`'
+enable_shared_with_static_runtimes='`$ECHO "$enable_shared_with_static_runtimes" | $SED "$delay_single_quote_subst"`'
+export_dynamic_flag_spec='`$ECHO "$export_dynamic_flag_spec" | $SED "$delay_single_quote_subst"`'
+whole_archive_flag_spec='`$ECHO "$whole_archive_flag_spec" | $SED "$delay_single_quote_subst"`'
+compiler_needs_object='`$ECHO "$compiler_needs_object" | $SED "$delay_single_quote_subst"`'
+old_archive_from_new_cmds='`$ECHO "$old_archive_from_new_cmds" | $SED "$delay_single_quote_subst"`'
+old_archive_from_expsyms_cmds='`$ECHO "$old_archive_from_expsyms_cmds" | $SED "$delay_single_quote_subst"`'
+archive_cmds='`$ECHO "$archive_cmds" | $SED "$delay_single_quote_subst"`'
+archive_expsym_cmds='`$ECHO "$archive_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+module_cmds='`$ECHO "$module_cmds" | $SED "$delay_single_quote_subst"`'
+module_expsym_cmds='`$ECHO "$module_expsym_cmds" | $SED "$delay_single_quote_subst"`'
+with_gnu_ld='`$ECHO "$with_gnu_ld" | $SED "$delay_single_quote_subst"`'
+allow_undefined_flag='`$ECHO "$allow_undefined_flag" | $SED "$delay_single_quote_subst"`'
+no_undefined_flag='`$ECHO "$no_undefined_flag" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_flag_spec='`$ECHO "$hardcode_libdir_flag_spec" | $SED "$delay_single_quote_subst"`'
+hardcode_libdir_separator='`$ECHO "$hardcode_libdir_separator" | $SED "$delay_single_quote_subst"`'
+hardcode_direct='`$ECHO "$hardcode_direct" | $SED "$delay_single_quote_subst"`'
+hardcode_direct_absolute='`$ECHO "$hardcode_direct_absolute" | $SED "$delay_single_quote_subst"`'
+hardcode_minus_L='`$ECHO "$hardcode_minus_L" | $SED "$delay_single_quote_subst"`'
+hardcode_shlibpath_var='`$ECHO "$hardcode_shlibpath_var" | $SED "$delay_single_quote_subst"`'
+hardcode_automatic='`$ECHO "$hardcode_automatic" | $SED "$delay_single_quote_subst"`'
+inherit_rpath='`$ECHO "$inherit_rpath" | $SED "$delay_single_quote_subst"`'
+link_all_deplibs='`$ECHO "$link_all_deplibs" | $SED "$delay_single_quote_subst"`'
+always_export_symbols='`$ECHO "$always_export_symbols" | $SED "$delay_single_quote_subst"`'
+export_symbols_cmds='`$ECHO "$export_symbols_cmds" | $SED "$delay_single_quote_subst"`'
+exclude_expsyms='`$ECHO "$exclude_expsyms" | $SED "$delay_single_quote_subst"`'
+include_expsyms='`$ECHO "$include_expsyms" | $SED "$delay_single_quote_subst"`'
+prelink_cmds='`$ECHO "$prelink_cmds" | $SED "$delay_single_quote_subst"`'
+postlink_cmds='`$ECHO "$postlink_cmds" | $SED "$delay_single_quote_subst"`'
+file_list_spec='`$ECHO "$file_list_spec" | $SED "$delay_single_quote_subst"`'
+variables_saved_for_relink='`$ECHO "$variables_saved_for_relink" | $SED "$delay_single_quote_subst"`'
+need_lib_prefix='`$ECHO "$need_lib_prefix" | $SED "$delay_single_quote_subst"`'
+need_version='`$ECHO "$need_version" | $SED "$delay_single_quote_subst"`'
+version_type='`$ECHO "$version_type" | $SED "$delay_single_quote_subst"`'
+runpath_var='`$ECHO "$runpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_var='`$ECHO "$shlibpath_var" | $SED "$delay_single_quote_subst"`'
+shlibpath_overrides_runpath='`$ECHO "$shlibpath_overrides_runpath" | $SED "$delay_single_quote_subst"`'
+libname_spec='`$ECHO "$libname_spec" | $SED "$delay_single_quote_subst"`'
+library_names_spec='`$ECHO "$library_names_spec" | $SED "$delay_single_quote_subst"`'
+soname_spec='`$ECHO "$soname_spec" | $SED "$delay_single_quote_subst"`'
+install_override_mode='`$ECHO "$install_override_mode" | $SED "$delay_single_quote_subst"`'
+postinstall_cmds='`$ECHO "$postinstall_cmds" | $SED "$delay_single_quote_subst"`'
+postuninstall_cmds='`$ECHO "$postuninstall_cmds" | $SED "$delay_single_quote_subst"`'
+finish_cmds='`$ECHO "$finish_cmds" | $SED "$delay_single_quote_subst"`'
+finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
+hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
+sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
+hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
+enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
+enable_dlopen_self_static='`$ECHO "$enable_dlopen_self_static" | $SED "$delay_single_quote_subst"`'
+old_striplib='`$ECHO "$old_striplib" | $SED "$delay_single_quote_subst"`'
+striplib='`$ECHO "$striplib" | $SED "$delay_single_quote_subst"`'
+
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in SED \
+GREP \
+EGREP \
+FGREP \
+SHELL \
+ECHO \
+LD \
+AS \
+DLLTOOL \
+OBJDUMP \
+PATH_SEPARATOR \
+NM \
+LN_S \
+lt_SP2NL \
+lt_NL2SP \
+reload_flag \
+deplibs_check_method \
+file_magic_cmd \
+file_magic_glob \
+want_nocaseglob \
+sharedlib_from_linklib_cmd \
+AR \
+AR_FLAGS \
+archiver_list_spec \
+STRIP \
+RANLIB \
+CC \
+CFLAGS \
+compiler \
+lt_cv_sys_global_symbol_pipe \
+lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
+lt_cv_sys_global_symbol_to_c_name_address \
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
+nm_file_list_spec \
+lt_cv_truncate_bin \
+lt_prog_compiler_no_builtin_flag \
+lt_prog_compiler_pic \
+lt_prog_compiler_wl \
+lt_prog_compiler_static \
+lt_cv_prog_compiler_c_o \
+need_locks \
+MANIFEST_TOOL \
+DSYMUTIL \
+NMEDIT \
+LIPO \
+OTOOL \
+OTOOL64 \
+shrext_cmds \
+export_dynamic_flag_spec \
+whole_archive_flag_spec \
+compiler_needs_object \
+with_gnu_ld \
+allow_undefined_flag \
+no_undefined_flag \
+hardcode_libdir_flag_spec \
+hardcode_libdir_separator \
+exclude_expsyms \
+include_expsyms \
+file_list_spec \
+variables_saved_for_relink \
+libname_spec \
+library_names_spec \
+soname_spec \
+install_override_mode \
+finish_eval \
+old_striplib \
+striplib; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in reload_cmds \
+old_postinstall_cmds \
+old_postuninstall_cmds \
+old_archive_cmds \
+extract_expsyms_cmds \
+old_archive_from_new_cmds \
+old_archive_from_expsyms_cmds \
+archive_cmds \
+archive_expsym_cmds \
+module_cmds \
+module_expsym_cmds \
+export_symbols_cmds \
+prelink_cmds \
+postlink_cmds \
+postinstall_cmds \
+postuninstall_cmds \
+finish_cmds \
+sys_lib_search_path_spec \
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path; do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[\\\\\\\`\\"\\\$]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+ac_aux_dir='$ac_aux_dir'
+
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+
+
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ RM='$RM'
+ ofile='$ofile'
+
+
+
+
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+
+# Handling of arguments.
+for ac_config_target in $ac_config_targets
+do
+ case $ac_config_target in
+ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+ "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
+ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+ "libpng.pc") CONFIG_FILES="$CONFIG_FILES libpng.pc:libpng.pc.in" ;;
+ "libpng-config") CONFIG_FILES="$CONFIG_FILES libpng-config:libpng-config.in" ;;
+
+ *) as_fn_error $? "invalid argument: \`$ac_config_target'" "$LINENO" 5;;
+ esac
+done
+
+
+# If the user did not use the arguments to specify the items to instantiate,
+# then the envvar interface is used. Set only those that are not.
+# We use the long form for the default assignment because of an extremely
+# bizarre bug on SunOS 4.1.3.
+if $ac_need_defaults; then
+ test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
+ test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
+ test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
+fi
+
+# Have a temporary directory for convenience. Make it in the build tree
+# simply because there is no reason against having it here, and in addition,
+# creating and moving files from /tmp can sometimes cause problems.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
+$debug ||
+{
+ tmp= ac_tmp=
+ trap 'exit_status=$?
+ : "${ac_tmp:=$tmp}"
+ { test ! -d "$ac_tmp" || rm -fr "$ac_tmp"; } && exit $exit_status
+' 0
+ trap 'as_fn_exit 1' 1 2 13 15
+}
+# Create a (secure) tmp directory for tmp files.
+
+{
+ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
+ test -d "$tmp"
+} ||
+{
+ tmp=./conf$$-$RANDOM
+ (umask 077 && mkdir "$tmp")
+} || as_fn_error $? "cannot create a temporary directory in ." "$LINENO" 5
+ac_tmp=$tmp
+
+# Set up the scripts for CONFIG_FILES section.
+# No need to generate them if there are no CONFIG_FILES.
+# This happens for instance with `./config.status config.h'.
+if test -n "$CONFIG_FILES"; then
+
+
+ac_cr=`echo X | tr X '\015'`
+# On cygwin, bash can eat \r inside `` if the user requested igncr.
+# But we know of no other shell where ac_cr would be empty at this
+# point, so we can use a bashism as a fallback.
+if test "x$ac_cr" = x; then
+ eval ac_cr=\$\'\\r\'
+fi
+ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null`
+if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then
+ ac_cs_awk_cr='\\r'
+else
+ ac_cs_awk_cr=$ac_cr
+fi
+
+echo 'BEGIN {' >"$ac_tmp/subs1.awk" &&
+_ACEOF
+
+
+{
+ echo "cat >conf$$subs.awk <<_ACEOF" &&
+ echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' &&
+ echo "_ACEOF"
+} >conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ac_delim_num=`echo "$ac_subst_vars" | grep -c '^'`
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+ . ./conf$$subs.sh ||
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+
+ ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X`
+ if test $ac_delim_n = $ac_delim_num; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_STATUS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+rm -f conf$$subs.sh
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+cat >>"\$ac_tmp/subs1.awk" <<\\_ACAWK &&
+_ACEOF
+sed -n '
+h
+s/^/S["/; s/!.*/"]=/
+p
+g
+s/^[^!]*!//
+:repl
+t repl
+s/'"$ac_delim"'$//
+t delim
+:nl
+h
+s/\(.\{148\}\)..*/\1/
+t more1
+s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/
+p
+n
+b repl
+:more1
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t nl
+:delim
+h
+s/\(.\{148\}\)..*/\1/
+t more2
+s/["\\]/\\&/g; s/^/"/; s/$/"/
+p
+b
+:more2
+s/["\\]/\\&/g; s/^/"/; s/$/"\\/
+p
+g
+s/.\{148\}//
+t delim
+' <conf$$subs.awk | sed '
+/^[^""]/{
+ N
+ s/\n//
+}
+' >>$CONFIG_STATUS || ac_write_fail=1
+rm -f conf$$subs.awk
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+_ACAWK
+cat >>"\$ac_tmp/subs1.awk" <<_ACAWK &&
+ for (key in S) S_is_set[key] = 1
+ FS = ""
+
+}
+{
+ line = $ 0
+ nfields = split(line, field, "@")
+ substed = 0
+ len = length(field[1])
+ for (i = 2; i < nfields; i++) {
+ key = field[i]
+ keylen = length(key)
+ if (S_is_set[key]) {
+ value = S[key]
+ line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3)
+ len += length(value) + length(field[++i])
+ substed = 1
+ } else
+ len += 1 + keylen
+ }
+
+ print line
+}
+
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then
+ sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g"
+else
+ cat
+fi < "$ac_tmp/subs1.awk" > "$ac_tmp/subs.awk" \
+ || as_fn_error $? "could not setup config files machinery" "$LINENO" 5
+_ACEOF
+
+# VPATH may cause trouble with some makes, so we remove sole $(srcdir),
+# ${srcdir} and @srcdir@ entries from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[ ]*/{
+h
+s///
+s/^/:/
+s/[ ]*$/:/
+s/:\$(srcdir):/:/g
+s/:\${srcdir}:/:/g
+s/:@srcdir@:/:/g
+s/^:*//
+s/:*$//
+x
+s/\(=[ ]*\).*/\1/
+G
+s/\n//
+s/^[^=]*=[ ]*$//
+}'
+fi
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+fi # test -n "$CONFIG_FILES"
+
+# Set up the scripts for CONFIG_HEADERS section.
+# No need to generate them if there are no CONFIG_HEADERS.
+# This happens for instance with `./config.status Makefile'.
+if test -n "$CONFIG_HEADERS"; then
+cat >"$ac_tmp/defines.awk" <<\_ACAWK ||
+BEGIN {
+_ACEOF
+
+# Transform confdefs.h into an awk script `defines.awk', embedded as
+# here-document in config.status, that substitutes the proper values into
+# config.h.in to produce config.h.
+
+# Create a delimiter string that does not exist in confdefs.h, to ease
+# handling of long lines.
+ac_delim='%!_!# '
+for ac_last_try in false false :; do
+ ac_tt=`sed -n "/$ac_delim/p" confdefs.h`
+ if test -z "$ac_tt"; then
+ break
+ elif $ac_last_try; then
+ as_fn_error $? "could not make $CONFIG_HEADERS" "$LINENO" 5
+ else
+ ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+ fi
+done
+
+# For the awk script, D is an array of macro values keyed by name,
+# likewise P contains macro parameters if any. Preserve backslash
+# newline sequences.
+
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+sed -n '
+s/.\{148\}/&'"$ac_delim"'/g
+t rset
+:rset
+s/^[ ]*#[ ]*define[ ][ ]*/ /
+t def
+d
+:def
+s/\\$//
+t bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3"/p
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p
+d
+:bsnl
+s/["\\]/\\&/g
+s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\
+D["\1"]=" \3\\\\\\n"\\/p
+t cont
+s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p
+t cont
+d
+:cont
+n
+s/.\{148\}/&'"$ac_delim"'/g
+t clear
+:clear
+s/\\$//
+t bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/"/p
+d
+:bsnlc
+s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p
+b cont
+' <confdefs.h | sed '
+s/'"$ac_delim"'/"\\\
+"/g' >>$CONFIG_STATUS || ac_write_fail=1
+
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ for (key in D) D_is_set[key] = 1
+ FS = ""
+}
+/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ {
+ line = \$ 0
+ split(line, arg, " ")
+ if (arg[1] == "#") {
+ defundef = arg[2]
+ mac1 = arg[3]
+ } else {
+ defundef = substr(arg[1], 2)
+ mac1 = arg[2]
+ }
+ split(mac1, mac2, "(") #)
+ macro = mac2[1]
+ prefix = substr(line, 1, index(line, defundef) - 1)
+ if (D_is_set[macro]) {
+ # Preserve the white space surrounding the "#".
+ print prefix "define", macro P[macro] D[macro]
+ next
+ } else {
+ # Replace #undef with comments. This is necessary, for example,
+ # in the case of _POSIX_SOURCE, which is predefined and required
+ # on some systems where configure will not decide to define it.
+ if (defundef == "undef") {
+ print "/*", prefix defundef, macro, "*/"
+ next
+ }
+ }
+}
+{ print }
+_ACAWK
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+ as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
+fi # test -n "$CONFIG_HEADERS"
+
+
+eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS"
+shift
+for ac_tag
+do
+ case $ac_tag in
+ :[FHLC]) ac_mode=$ac_tag; continue;;
+ esac
+ case $ac_mode$ac_tag in
+ :[FHL]*:*);;
+ :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
+ :[FH]-) ac_tag=-:-;;
+ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+ esac
+ ac_save_IFS=$IFS
+ IFS=:
+ set x $ac_tag
+ IFS=$ac_save_IFS
+ shift
+ ac_file=$1
+ shift
+
+ case $ac_mode in
+ :L) ac_source=$1;;
+ :[FH])
+ ac_file_inputs=
+ for ac_f
+ do
+ case $ac_f in
+ -) ac_f="$ac_tmp/stdin";;
+ *) # Look for the file first in the build tree, then in the source tree
+ # (if the path is not absolute). The absolute path cannot be DOS-style,
+ # because $ac_f cannot contain `:'.
+ test -f "$ac_f" ||
+ case $ac_f in
+ [\\/$]*) false;;
+ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+ esac ||
+ as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
+ esac
+ case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
+ as_fn_append ac_file_inputs " '$ac_f'"
+ done
+
+ # Let's still pretend it is `configure' which instantiates (i.e., don't
+ # use $as_me), people would be surprised to read:
+ # /* config.h. Generated by config.status. */
+ configure_input='Generated from '`
+ $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
+ `' by configure.'
+ if test x"$ac_file" != x-; then
+ configure_input="$ac_file. $configure_input"
+ { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
+$as_echo "$as_me: creating $ac_file" >&6;}
+ fi
+ # Neutralize special characters interpreted by sed in replacement strings.
+ case $configure_input in #(
+ *\&* | *\|* | *\\* )
+ ac_sed_conf_input=`$as_echo "$configure_input" |
+ sed 's/[\\\\&|]/\\\\&/g'`;; #(
+ *) ac_sed_conf_input=$configure_input;;
+ esac
+
+ case $ac_tag in
+ *:-:* | *:-) cat >"$ac_tmp/stdin" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
+ esac
+ ;;
+ esac
+
+ ac_dir=`$as_dirname -- "$ac_file" ||
+$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$ac_file" : 'X\(//\)[^/]' \| \
+ X"$ac_file" : 'X\(//\)$' \| \
+ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$ac_file" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ as_dir="$ac_dir"; as_fn_mkdir_p
+ ac_builddir=.
+
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
+ ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
+ # A ".." for each directory in $ac_dir_suffix.
+ ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
+ case $ac_top_builddir_sub in
+ "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+ esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
+
+case $srcdir in
+ .) # We are building in place.
+ ac_srcdir=.
+ ac_top_srcdir=$ac_top_builddir_sub
+ ac_abs_top_srcdir=$ac_pwd ;;
+ [\\/]* | ?:[\\/]* ) # Absolute name.
+ ac_srcdir=$srcdir$ac_dir_suffix;
+ ac_top_srcdir=$srcdir
+ ac_abs_top_srcdir=$srcdir ;;
+ *) # Relative name.
+ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+ ac_top_srcdir=$ac_top_build_prefix$srcdir
+ ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
+esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
+
+
+ case $ac_mode in
+ :F)
+ #
+ # CONFIG_FILE
+ #
+
+ case $INSTALL in
+ [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
+ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
+ esac
+ ac_MKDIR_P=$MKDIR_P
+ case $MKDIR_P in
+ [\\/$]* | ?:[\\/]* ) ;;
+ */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
+ esac
+_ACEOF
+
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+ac_sed_dataroot='
+/datarootdir/ {
+ p
+ q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p'
+case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
+_ACEOF
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ ac_datarootdir_hack='
+ s&@datadir@&$datadir&g
+ s&@docdir@&$docdir&g
+ s&@infodir@&$infodir&g
+ s&@localedir@&$localedir&g
+ s&@mandir@&$mandir&g
+ s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
+ac_sed_extra="$ac_vpsub
+$extrasub
+_ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
+:t
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
+s|@configure_input@|$ac_sed_conf_input|;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@top_build_prefix@&$ac_top_build_prefix&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+s&@MKDIR_P@&$ac_MKDIR_P&;t t
+$ac_datarootdir_hack
+"
+eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
+ >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+ { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
+ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' \
+ "$ac_tmp/out"`; test -z "$ac_out"; } &&
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&5
+$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined. Please make sure it is defined" >&2;}
+
+ rm -f "$ac_tmp/stdin"
+ case $ac_file in
+ -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
+ *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
+ esac \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ ;;
+ :H)
+ #
+ # CONFIG_HEADER
+ #
+ if test x"$ac_file" != x-; then
+ {
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
+ } >"$ac_tmp/config.h" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
+$as_echo "$as_me: $ac_file is unchanged" >&6;}
+ else
+ rm -f "$ac_file"
+ mv "$ac_tmp/config.h" "$ac_file" \
+ || as_fn_error $? "could not create $ac_file" "$LINENO" 5
+ fi
+ else
+ $as_echo "/* $configure_input */" \
+ && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
+ || as_fn_error $? "could not create -" "$LINENO" 5
+ fi
+# Compute "$ac_file"'s index in $config_headers.
+_am_arg="$ac_file"
+_am_stamp_count=1
+for _am_header in $config_headers :; do
+ case $_am_header in
+ $_am_arg | $_am_arg:* )
+ break ;;
+ * )
+ _am_stamp_count=`expr $_am_stamp_count + 1` ;;
+ esac
+done
+echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
+$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$_am_arg" : 'X\(//\)[^/]' \| \
+ X"$_am_arg" : 'X\(//\)$' \| \
+ X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$_am_arg" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
+
+ :C) { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
+$as_echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+ esac
+
+
+ case $ac_file$ac_mode in
+ "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
+ # Older Autoconf quotes --file arguments for eval, but not when files
+ # are listed without --file. Let's play safe and only enable the eval
+ # if we detect the quoting.
+ # TODO: see whether this extra hack can be removed once we start
+ # requiring Autoconf 2.70 or later.
+ case $CONFIG_FILES in #(
+ *\'*) :
+ eval set x "$CONFIG_FILES" ;; #(
+ *) :
+ set x $CONFIG_FILES ;; #(
+ *) :
+ ;;
+esac
+ shift
+ # Used to flag and report bootstrapping failures.
+ am_rc=0
+ for am_mf
+ do
+ # Strip MF so we end up with the name of the file.
+ am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile which includes
+ # dependency-tracking related rules and includes.
+ # Grep'ing the whole file directly is not great: AIX grep has a line
+ # limit of 2048, but all sed's we know have understand at least 4000.
+ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+ || continue
+ am_dirpart=`$as_dirname -- "$am_mf" ||
+$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$am_mf" : 'X\(//\)[^/]' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$am_mf" |
+ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)[^/].*/{
+ s//\1/
+ q
+ }
+ /^X\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ am_filepart=`$as_basename -- "$am_mf" ||
+$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$am_mf" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\/\)$/{
+ s//\1/
+ q
+ }
+ /^X\/\(\/\).*/{
+ s//\1/
+ q
+ }
+ s/.*/./; q'`
+ { echo "$as_me:$LINENO: cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles" >&5
+ (cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } || am_rc=$?
+ done
+ if test $am_rc -ne 0; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "Something went wrong bootstrapping makefile fragments
+ for automatic dependency tracking. Try re-running configure with the
+ '--disable-dependency-tracking' option to at least be able to build
+ the package (albeit without support for automatic dependency tracking).
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ { am_dirpart=; unset am_dirpart;}
+ { am_filepart=; unset am_filepart;}
+ { am_mf=; unset am_mf;}
+ { am_rc=; unset am_rc;}
+ rm -f conftest-deps.mk
+}
+ ;;
+ "libtool":C)
+
+ # See if we are running on zsh, and set the options that allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile=${ofile}T
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+# The names of the tagged configurations supported by this script.
+available_tags=''
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+
+# A sed program that does not truncate output.
+SED=$lt_SED
+
+# Sed that helps us avoid accidentally triggering echo(1) options like -n.
+Xsed="\$SED -e 1s/^X//"
+
+# A grep program that handles long lines.
+GREP=$lt_GREP
+
+# An ERE matcher.
+EGREP=$lt_EGREP
+
+# A literal string matcher.
+FGREP=$lt_FGREP
+
+# Shell to use when invoking shell scripts.
+SHELL=$lt_SHELL
+
+# An echo program that protects backslashes.
+ECHO=$lt_ECHO
+
+# Which release of libtool.m4 was used?
+macro_version=$macro_version
+macro_revision=$macro_revision
+
+# Assembler program.
+AS=$lt_AS
+
+# DLL creation program.
+DLLTOOL=$lt_DLLTOOL
+
+# Object dumper program.
+OBJDUMP=$lt_OBJDUMP
+
+# Whether or not to build shared libraries.
+build_libtool_libs=$enable_shared
+
+# Whether or not to build static libraries.
+build_old_libs=$enable_static
+
+# What type of objects to build.
+pic_mode=$pic_mode
+
+# Whether or not to optimize for fast installation.
+fast_install=$enable_fast_install
+
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
+# The PATH separator for the build system.
+PATH_SEPARATOR=$lt_PATH_SEPARATOR
+
+# The host system.
+host_alias=$host_alias
+host=$host
+host_os=$host_os
+
+# The build system.
+build_alias=$build_alias
+build=$build
+build_os=$build_os
+
+# A BSD- or MS-compatible name lister.
+NM=$lt_NM
+
+# Whether we need soft or hard links.
+LN_S=$lt_LN_S
+
+# What is the maximum length of a command?
+max_cmd_len=$max_cmd_len
+
+# Object file suffix (normally "o").
+objext=$ac_objext
+
+# Executable file suffix (normally "").
+exeext=$exeext
+
+# whether the shell understands "unset".
+lt_unset=$lt_unset
+
+# turn spaces into newlines.
+SP2NL=$lt_lt_SP2NL
+
+# turn newlines into spaces.
+NL2SP=$lt_lt_NL2SP
+
+# convert \$build file names to \$host format.
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+
+# convert \$build files to toolchain format.
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+
+# Method to check whether dependent libraries are shared objects.
+deplibs_check_method=$lt_deplibs_check_method
+
+# Command to use when deplibs_check_method = "file_magic".
+file_magic_cmd=$lt_file_magic_cmd
+
+# How to find potential files when deplibs_check_method = "file_magic".
+file_magic_glob=$lt_file_magic_glob
+
+# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
+want_nocaseglob=$lt_want_nocaseglob
+
+# Command to associate shared and link libraries.
+sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd
+
+# The archiver.
+AR=$lt_AR
+
+# Flags to create an archive.
+AR_FLAGS=$lt_AR_FLAGS
+
+# How to feed a file listing to the archiver.
+archiver_list_spec=$lt_archiver_list_spec
+
+# A symbol stripping program.
+STRIP=$lt_STRIP
+
+# Commands used to install an old-style archive.
+RANLIB=$lt_RANLIB
+old_postinstall_cmds=$lt_old_postinstall_cmds
+old_postuninstall_cmds=$lt_old_postuninstall_cmds
+
+# Whether to use a lock for old archive extraction.
+lock_old_archive_extraction=$lock_old_archive_extraction
+
+# A C compiler.
+LTCC=$lt_CC
+
+# LTCC compiler flags.
+LTCFLAGS=$lt_CFLAGS
+
+# Take the output of nm and produce a listing of raw symbols and C names.
+global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
+
+# Transform the output of nm in a proper C declaration.
+global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
+# Transform the output of nm in a C name address pair.
+global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
+
+# Transform the output of nm in a C name address pair when lib prefix is needed.
+global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
+# Specify filename containing input files for \$NM.
+nm_file_list_spec=$lt_nm_file_list_spec
+
+# The root where to search for dependent libraries,and where our libraries should be installed.
+lt_sysroot=$lt_sysroot
+
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
+# The name of the directory that contains temporary libtool files.
+objdir=$objdir
+
+# Used to examine libraries when file_magic_cmd begins with "file".
+MAGIC_CMD=$MAGIC_CMD
+
+# Must we lock files when doing compilation?
+need_locks=$lt_need_locks
+
+# Manifest tool.
+MANIFEST_TOOL=$lt_MANIFEST_TOOL
+
+# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
+DSYMUTIL=$lt_DSYMUTIL
+
+# Tool to change global to local symbols on Mac OS X.
+NMEDIT=$lt_NMEDIT
+
+# Tool to manipulate fat objects and archives on Mac OS X.
+LIPO=$lt_LIPO
+
+# ldd/readelf like tool for Mach-O binaries on Mac OS X.
+OTOOL=$lt_OTOOL
+
+# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
+OTOOL64=$lt_OTOOL64
+
+# Old archive suffix (normally "a").
+libext=$libext
+
+# Shared library suffix (normally ".so").
+shrext_cmds=$lt_shrext_cmds
+
+# The commands to extract the exported symbol list from a shared archive.
+extract_expsyms_cmds=$lt_extract_expsyms_cmds
+
+# Variables whose values should be saved in libtool wrapper scripts and
+# restored at link time.
+variables_saved_for_relink=$lt_variables_saved_for_relink
+
+# Do we need the "lib" prefix for modules?
+need_lib_prefix=$need_lib_prefix
+
+# Do we need a version for libraries?
+need_version=$need_version
+
+# Library versioning type.
+version_type=$version_type
+
+# Shared library runtime path variable.
+runpath_var=$runpath_var
+
+# Shared library path variable.
+shlibpath_var=$shlibpath_var
+
+# Is shlibpath searched before the hard-coded library search path?
+shlibpath_overrides_runpath=$shlibpath_overrides_runpath
+
+# Format of library name prefix.
+libname_spec=$lt_libname_spec
+
+# List of archive names. First name is the real one, the rest are links.
+# The last name is the one that the linker finds with -lNAME
+library_names_spec=$lt_library_names_spec
+
+# The coded name of the library, if different from the real name.
+soname_spec=$lt_soname_spec
+
+# Permission mode override for installation of shared libraries.
+install_override_mode=$lt_install_override_mode
+
+# Command to use after installation of a shared archive.
+postinstall_cmds=$lt_postinstall_cmds
+
+# Command to use after uninstallation of a shared archive.
+postuninstall_cmds=$lt_postuninstall_cmds
+
+# Commands used to finish a libtool library installation in a directory.
+finish_cmds=$lt_finish_cmds
+
+# As "finish_cmds", except a single script fragment to be evaled but
+# not shown.
+finish_eval=$lt_finish_eval
+
+# Whether we should hardcode library paths into libraries.
+hardcode_into_libs=$hardcode_into_libs
+
+# Compile-time system search path for libraries.
+sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
+
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
+
+# Whether dlopen is supported.
+dlopen_support=$enable_dlopen
+
+# Whether dlopen of programs is supported.
+dlopen_self=$enable_dlopen_self
+
+# Whether dlopen of statically linked programs is supported.
+dlopen_self_static=$enable_dlopen_self_static
+
+# Commands to strip libraries.
+old_striplib=$lt_old_striplib
+striplib=$lt_striplib
+
+
+# The linker used to build libraries.
+LD=$lt_LD
+
+# How to create reloadable object files.
+reload_flag=$lt_reload_flag
+reload_cmds=$lt_reload_cmds
+
+# Commands used to build an old-style archive.
+old_archive_cmds=$lt_old_archive_cmds
+
+# A language specific compiler.
+CC=$lt_compiler
+
+# Is the compiler the GNU compiler?
+with_gcc=$GCC
+
+# Compiler flag to turn off builtin functions.
+no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
+
+# Additional compiler flags for building library objects.
+pic_flag=$lt_lt_prog_compiler_pic
+
+# How to pass a linker flag through the compiler.
+wl=$lt_lt_prog_compiler_wl
+
+# Compiler flag to prevent dynamic linking.
+link_static_flag=$lt_lt_prog_compiler_static
+
+# Does compiler simultaneously support -c and -o options?
+compiler_c_o=$lt_lt_cv_prog_compiler_c_o
+
+# Whether or not to add -lc for building shared libraries.
+build_libtool_need_lc=$archive_cmds_need_lc
+
+# Whether or not to disallow shared libs when runtime libs are static.
+allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
+
+# Compiler flag to allow reflexive dlopens.
+export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
+
+# Compiler flag to generate shared objects directly from archives.
+whole_archive_flag_spec=$lt_whole_archive_flag_spec
+
+# Whether the compiler copes with passing no objects directly.
+compiler_needs_object=$lt_compiler_needs_object
+
+# Create an old-style archive from a shared archive.
+old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
+
+# Create a temporary old-style archive to link instead of a shared archive.
+old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
+
+# Commands used to build a shared archive.
+archive_cmds=$lt_archive_cmds
+archive_expsym_cmds=$lt_archive_expsym_cmds
+
+# Commands used to build a loadable module if different from building
+# a shared archive.
+module_cmds=$lt_module_cmds
+module_expsym_cmds=$lt_module_expsym_cmds
+
+# Whether we are building with GNU ld or not.
+with_gnu_ld=$lt_with_gnu_ld
+
+# Flag that allows shared libraries with undefined symbols to be built.
+allow_undefined_flag=$lt_allow_undefined_flag
+
+# Flag that enforces no undefined symbols.
+no_undefined_flag=$lt_no_undefined_flag
+
+# Flag to hardcode \$libdir into a binary during linking.
+# This must work even if \$libdir does not exist
+hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
+
+# Whether we need a single "-rpath" flag with a separated argument.
+hardcode_libdir_separator=$lt_hardcode_libdir_separator
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary.
+hardcode_direct=$hardcode_direct
+
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
+# DIR into the resulting binary and the resulting library dependency is
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
+# library is relocated.
+hardcode_direct_absolute=$hardcode_direct_absolute
+
+# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+# into the resulting binary.
+hardcode_minus_L=$hardcode_minus_L
+
+# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+# into the resulting binary.
+hardcode_shlibpath_var=$hardcode_shlibpath_var
+
+# Set to "yes" if building a shared library automatically hardcodes DIR
+# into the library and all subsequent libraries and executables linked
+# against it.
+hardcode_automatic=$hardcode_automatic
+
+# Set to yes if linker adds runtime paths of dependent libraries
+# to runtime path list.
+inherit_rpath=$inherit_rpath
+
+# Whether libtool must link a program against all its dependency libraries.
+link_all_deplibs=$link_all_deplibs
+
+# Set to "yes" if exported symbols are required.
+always_export_symbols=$always_export_symbols
+
+# The commands to list exported symbols.
+export_symbols_cmds=$lt_export_symbols_cmds
+
+# Symbols that should not be listed in the preloaded symbols.
+exclude_expsyms=$lt_exclude_expsyms
+
+# Symbols that must always be exported.
+include_expsyms=$lt_include_expsyms
+
+# Commands necessary for linking programs (against libraries) with templates.
+prelink_cmds=$lt_prelink_cmds
+
+# Commands necessary for finishing linking programs.
+postlink_cmds=$lt_postlink_cmds
+
+# Specify filename containing input files.
+file_list_spec=$lt_file_list_spec
+
+# How to hardcode a shared library path into an executable.
+hardcode_action=$hardcode_action
+
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+
+ltmain=$ac_aux_dir/ltmain.sh
+
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+
+ ;;
+ "libpng-config":F) chmod +x libpng-config ;;
+
+ esac
+done # for ac_tag
+
+
+as_fn_exit 0
+_ACEOF
+ac_clean_files=$ac_clean_files_save
+
+test $ac_write_fail = 0 ||
+ as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5
+
+
+# configure is writing to config.log, and then calls config.status.
+# config.status does its own redirection, appending to config.log.
+# Unfortunately, on DOS this fails, as config.log is still kept open
+# by configure, so config.status won't be able to write to it; its
+# output is simply discarded. So we exec the FD to /dev/null,
+# effectively closing config.log, so it can be properly (re)opened and
+# appended to by config.status. When coming back to configure, we
+# need to make the FD available again.
+if test "$no_create" != yes; then
+ ac_cs_success=:
+ ac_config_status_args=
+ test "$silent" = yes &&
+ ac_config_status_args="$ac_config_status_args --quiet"
+ exec 5>/dev/null
+ $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
+ exec 5>>config.log
+ # Use ||, not &&, to avoid exiting from the if with $? = 1, which
+ # would make configure fail if this is the last instruction.
+ $ac_cs_success || as_fn_exit 1
+fi
+if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
+$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
+fi
+
diff --git a/configure.ac b/configure.ac
index e3cfafd..d1787c5 100644
--- a/configure.ac
+++ b/configure.ac
@@ -25,7 +25,7 @@
dnl Version number stuff here:
-AC_INIT([libpng],[1.6.34],[png-mng-implement@lists.sourceforge.net])
+AC_INIT([libpng],[1.6.35],[png-mng-implement@lists.sourceforge.net])
AC_CONFIG_MACRO_DIR([scripts])
# libpng does not follow GNU file name conventions (hence 'foreign')
@@ -46,10 +46,10 @@
dnl AM_PREREQ([1.11.2])
dnl stop configure from automagically running automake
-PNGLIB_VERSION=1.6.34
+PNGLIB_VERSION=1.6.35
PNGLIB_MAJOR=1
PNGLIB_MINOR=6
-PNGLIB_RELEASE=34
+PNGLIB_RELEASE=35
dnl End of version number stuff
diff --git a/contrib/conftest/pngcp.dfa b/contrib/conftest/pngcp.dfa
index 15a856e..acf200d 100644
--- a/contrib/conftest/pngcp.dfa
+++ b/contrib/conftest/pngcp.dfa
@@ -33,7 +33,7 @@
option WRITE_FILTER on
# pngcp needs this to preserve unknown chunks, switching all these on means that
-# pngcp can work without explicit known chunk reading suppport
+# pngcp can work without explicit known chunk reading support
option UNKNOWN_CHUNKS on
option SET_UNKNOWN_CHUNKS on
option HANDLE_AS_UNKNOWN on
diff --git a/contrib/examples/iccfrompng.c b/contrib/examples/iccfrompng.c
index 603037e..00056ab 100644
--- a/contrib/examples/iccfrompng.c
+++ b/contrib/examples/iccfrompng.c
@@ -10,7 +10,7 @@
* without processing the image. Notice that some header information may occur
* after the image data. Textual data and comments are an example; the approach
* in this file won't work reliably for such data because it only looks for the
- * information in the section of the file that preceeds the image data.
+ * information in the section of the file that precedes the image data.
*
* Compile and link against libpng and zlib, plus anything else required on the
* system you use.
diff --git a/contrib/libtests/makepng.c b/contrib/libtests/makepng.c
index 9dff048..e58a61d 100644
--- a/contrib/libtests/makepng.c
+++ b/contrib/libtests/makepng.c
@@ -950,7 +950,7 @@
int passes = 1;
# endif /* !WRITE_INTERLACING */
int pass;
- png_size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr);
+ size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr);
row = malloc(rowbytes);
@@ -1094,7 +1094,7 @@
return 0;
}
-static png_size_t
+static size_t
load_fake(png_charp param, png_bytepp profile)
{
char *endptr = NULL;
@@ -1164,7 +1164,7 @@
{
case '<':
{
- png_size_t filelen = load_file(params[1]+1, &profile);
+ size_t filelen = load_file(params[1]+1, &profile);
if (filelen > 0xfffffffc) /* Maximum profile length */
{
fprintf(stderr, "%s: file too long (%lu) for an ICC profile\n",
@@ -1179,7 +1179,7 @@
case '0': case '1': case '2': case '3': case '4':
case '5': case '6': case '7': case '8': case '9':
{
- png_size_t fake_len = load_fake(params[1], &profile);
+ size_t fake_len = load_fake(params[1], &profile);
if (fake_len > 0) /* else a simple parameter */
{
@@ -1274,7 +1274,7 @@
case '5': case '6': case '7': case '8': case '9':
{
png_bytep data = NULL;
- png_size_t fake_len = load_fake(param, &data);
+ size_t fake_len = load_fake(param, &data);
if (fake_len > 0) /* else a simple parameter */
{
diff --git a/contrib/libtests/pngimage.c b/contrib/libtests/pngimage.c
index 9ae402c..998d58c 100644
--- a/contrib/libtests/pngimage.c
+++ b/contrib/libtests/pngimage.c
@@ -551,7 +551,7 @@
png_structp original_pp; /* used on the original read */
png_infop original_ip; /* set by the original read */
- png_size_t original_rowbytes; /* of the original rows: */
+ size_t original_rowbytes; /* of the original rows: */
png_bytepp original_rows; /* from the original read */
/* Original chunks valid */
@@ -807,7 +807,7 @@
static void
buffer_read(struct display *dp, struct buffer *bp, png_bytep data,
- png_size_t size)
+ size_t size)
{
struct buffer_list *last = bp->current;
size_t read_count = bp->read_count;
@@ -855,7 +855,7 @@
}
static void PNGCBAPI
-read_function(png_structp pp, png_bytep data, png_size_t size)
+read_function(png_structp pp, png_bytep data, size_t size)
{
buffer_read(get_dp(pp), get_buffer(pp), data, size);
}
@@ -927,7 +927,7 @@
png_structp pp;
png_infop ip;
- /* Now perform the initial read with a 0 tranform. */
+ /* Now perform the initial read with a 0 transform. */
read_png(dp, &dp->original_file, "original read", 0/*no transform*/);
/* Move the result to the 'original' fields */
@@ -1267,7 +1267,7 @@
#ifdef PNG_WRITE_PNG_SUPPORTED
static void
buffer_write(struct display *dp, struct buffer *buffer, png_bytep data,
- png_size_t size)
+ size_t size)
/* Generic write function used both from the write callback provided to
* libpng and from the generic read code.
*/
@@ -1311,7 +1311,7 @@
}
static void PNGCBAPI
-write_function(png_structp pp, png_bytep data, png_size_t size)
+write_function(png_structp pp, png_bytep data, size_t size)
{
buffer_write(get_dp(pp), get_buffer(pp), data, size);
}
diff --git a/contrib/libtests/pngstest.c b/contrib/libtests/pngstest.c
index ab45089..74c8d10 100644
--- a/contrib/libtests/pngstest.c
+++ b/contrib/libtests/pngstest.c
@@ -578,11 +578,11 @@
int stride_extra;
FILE *input_file;
png_voidp input_memory;
- png_size_t input_memory_size;
+ size_t input_memory_size;
png_bytep buffer;
ptrdiff_t stride;
- png_size_t bufsize;
- png_size_t allocsize;
+ size_t bufsize;
+ size_t allocsize;
char tmpfile_name[32];
png_uint_16 colormap[256*4];
}
@@ -665,7 +665,7 @@
static void
allocbuffer(Image *image)
{
- png_size_t size = PNG_IMAGE_BUFFER_SIZE(image->image, image->stride);
+ size_t size = PNG_IMAGE_BUFFER_SIZE(image->image, image->stride);
if (size+32 > image->bufsize)
{
@@ -1142,7 +1142,7 @@
}
}
-/* Convertion between pixel formats. The code above effectively eliminates the
+/* Conversion between pixel formats. The code above effectively eliminates the
* component ordering changes leaving three basic changes:
*
* 1) Remove an alpha channel by pre-multiplication or compositing on a
@@ -2036,7 +2036,7 @@
/* Precalculated values: */
int in_opaque; /* Value of input alpha that is opaque */
int is_palette; /* Sample values come from the palette */
- int accumulate; /* Accumlate component errors (don't log) */
+ int accumulate; /* Accumulate component errors (don't log) */
int output_8bit; /* Output is 8-bit (else 16-bit) */
void (*in_gp)(Pixel*, png_const_voidp);
diff --git a/contrib/libtests/pngunknown.c b/contrib/libtests/pngunknown.c
index 12eab72..d9cc448 100644
--- a/contrib/libtests/pngunknown.c
+++ b/contrib/libtests/pngunknown.c
@@ -85,7 +85,7 @@
#define PNG_WRITE_16BIT_SUPPORTED
#define PNG_READ_16BIT_SUPPORTED
-/* This comes from pnglibconf.h afer 1.5: */
+/* This comes from pnglibconf.h after 1.5: */
#define PNG_FP_1 100000
#define PNG_GAMMA_THRESHOLD_FIXED\
((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1))
diff --git a/contrib/libtests/pngvalid.c b/contrib/libtests/pngvalid.c
index 4dc4f84..e66f2fa 100644
--- a/contrib/libtests/pngvalid.c
+++ b/contrib/libtests/pngvalid.c
@@ -102,7 +102,7 @@
#define PNG_WRITE_16BIT_SUPPORTED
#define PNG_READ_16BIT_SUPPORTED
-/* This comes from pnglibconf.h afer 1.5: */
+/* This comes from pnglibconf.h after 1.5: */
#define PNG_FP_1 100000
#define PNG_GAMMA_THRESHOLD_FIXED\
((png_fixed_point)(PNG_GAMMA_THRESHOLD * PNG_FP_1))
@@ -711,7 +711,7 @@
unsigned int IDAT_bits; /* Number of bits in IDAT size */
png_uint_32 IDAT_size; /* Total size of IDAT data */
png_uint_32 id; /* must be correct (see FILEID) */
- png_size_t datacount; /* In this (the last) buffer */
+ size_t datacount; /* In this (the last) buffer */
png_store_buffer data; /* Last buffer in file */
int npalette; /* Number of entries in palette */
store_palette_entry* palette; /* May be NULL */
@@ -777,10 +777,10 @@
png_infop piread;
png_store_file* current; /* Set when reading */
png_store_buffer* next; /* Set when reading */
- png_size_t readpos; /* Position in *next */
+ size_t readpos; /* Position in *next */
png_byte* image; /* Buffer for reading interlaced images */
- png_size_t cb_image; /* Size of this buffer */
- png_size_t cb_row; /* Row size of the image(s) */
+ size_t cb_image; /* Size of this buffer */
+ size_t cb_row; /* Row size of the image(s) */
uLong IDAT_crc;
png_uint_32 IDAT_len; /* Used when re-chunking IDAT chunks */
png_uint_32 IDAT_pos; /* Used when re-chunking IDAT chunks */
@@ -791,7 +791,7 @@
png_store_file* saved;
png_structp pwrite; /* Used when writing a new file */
png_infop piwrite;
- png_size_t writepos; /* Position in .new */
+ size_t writepos; /* Position in .new */
char wname[FILE_NAME_SIZE];
png_store_buffer new; /* The end of the new PNG file being written. */
store_pool write_memory_pool;
@@ -1125,7 +1125,7 @@
store_image_row(const png_store* ps, png_const_structp pp, int nImage,
png_uint_32 y)
{
- png_size_t coffset = (nImage * ps->image_h + y) * (ps->cb_row + 5) + 2;
+ size_t coffset = (nImage * ps->image_h + y) * (ps->cb_row + 5) + 2;
if (ps->image == NULL)
png_error(pp, "no allocated image");
@@ -1160,9 +1160,9 @@
static void
store_ensure_image(png_store *ps, png_const_structp pp, int nImages,
- png_size_t cbRow, png_uint_32 cRows)
+ size_t cbRow, png_uint_32 cRows)
{
- png_size_t cb = nImages * cRows * (cbRow + 5);
+ size_t cb = nImages * cRows * (cbRow + 5);
if (ps->cb_image < cb)
{
@@ -1234,7 +1234,7 @@
png_error(pp, "image overwrite");
else
{
- png_size_t cbRow = ps->cb_row;
+ size_t cbRow = ps->cb_row;
png_uint_32 rows = ps->image_h;
image += iImage * (cbRow+5) * ps->image_h;
@@ -1278,7 +1278,7 @@
}
static void PNGCBAPI
-store_write(png_structp ppIn, png_bytep pb, png_size_t st)
+store_write(png_structp ppIn, png_bytep pb, size_t st)
{
png_const_structp pp = ppIn;
png_store *ps = voidcast(png_store*, png_get_io_ptr(pp));
@@ -1346,13 +1346,13 @@
else /* chunkpos >= 8 */
{
- png_size_t cb = st;
+ size_t cb = st;
if (cb > STORE_BUFFER_SIZE - writepos)
cb = STORE_BUFFER_SIZE - writepos;
if (cb > chunklen - chunkpos/* bytes left in chunk*/)
- cb = (png_size_t)/*SAFE*/(chunklen - chunkpos);
+ cb = (size_t)/*SAFE*/(chunklen - chunkpos);
memcpy(ps->new.buffer + writepos, pb, cb);
chunkpos += (png_uint_32)/*SAFE*/cb;
@@ -1440,7 +1440,7 @@
* during progressive read, where the io_ptr is set internally by libpng.
*/
static void
-store_read_imp(png_store *ps, png_bytep pb, png_size_t st)
+store_read_imp(png_store *ps, png_bytep pb, size_t st)
{
if (ps->current == NULL || ps->next == NULL)
png_error(ps->pread, "store state damaged");
@@ -1463,14 +1463,13 @@
}
}
-static png_size_t
-store_read_chunk(png_store *ps, png_bytep pb, const png_size_t max,
- const png_size_t min)
+static size_t
+store_read_chunk(png_store *ps, png_bytep pb, size_t max, size_t min)
{
png_uint_32 chunklen = ps->chunklen;
png_uint_32 chunktype = ps->chunktype;
png_uint_32 chunkpos = ps->chunkpos;
- png_size_t st = max;
+ size_t st = max;
if (st > 0) do
{
@@ -1601,8 +1600,8 @@
store_read_imp(ps, pb, avail);
ps->IDAT_crc = crc32(ps->IDAT_crc, pb, avail);
- pb += (png_size_t)/*SAFE*/avail;
- st -= (png_size_t)/*SAFE*/avail;
+ pb += (size_t)/*SAFE*/avail;
+ st -= (size_t)/*SAFE*/avail;
chunkpos += (png_uint_32)/*SAFE*/avail;
IDAT_size -= (png_uint_32)/*SAFE*/avail;
IDAT_pos += (png_uint_32)/*SAFE*/avail;
@@ -1669,10 +1668,10 @@
else /* Return chunk bytes, including the CRC */
{
- png_size_t avail = st;
+ size_t avail = st;
if (avail > chunklen - chunkpos)
- avail = (png_size_t)/*SAFE*/(chunklen - chunkpos);
+ avail = (size_t)/*SAFE*/(chunklen - chunkpos);
store_read_imp(ps, pb, avail);
pb += avail;
@@ -1698,7 +1697,7 @@
}
static void PNGCBAPI
-store_read(png_structp ppIn, png_bytep pb, png_size_t st)
+store_read(png_structp ppIn, png_bytep pb, size_t st)
{
png_const_structp pp = ppIn;
png_store *ps = voidcast(png_store*, png_get_io_ptr(pp));
@@ -1724,7 +1723,7 @@
while (store_read_buffer_avail(ps) > 0)
{
static png_uint_32 noise = 2;
- png_size_t cb;
+ size_t cb;
png_byte buffer[512];
/* Generate 15 more bits of stuff: */
@@ -2991,7 +2990,7 @@
* png_struct.
*/
static void
-modifier_read_imp(png_modifier *pm, png_bytep pb, png_size_t st)
+modifier_read_imp(png_modifier *pm, png_bytep pb, size_t st)
{
while (st > 0)
{
@@ -3137,7 +3136,7 @@
*/
if (len+12 <= sizeof pm->buffer)
{
- png_size_t s = len+12-pm->buffer_count;
+ size_t s = len+12-pm->buffer_count;
store_read_chunk(&pm->this, pm->buffer+pm->buffer_count, s, s);
pm->buffer_count = len+12;
@@ -3196,7 +3195,7 @@
/* The callback: */
static void PNGCBAPI
-modifier_read(png_structp ppIn, png_bytep pb, png_size_t st)
+modifier_read(png_structp ppIn, png_bytep pb, size_t st)
{
png_const_structp pp = ppIn;
png_modifier *pm = voidcast(png_modifier*, png_get_io_ptr(pp));
@@ -3226,7 +3225,7 @@
for (;;)
{
static png_uint_32 noise = 1;
- png_size_t cb, cbAvail;
+ size_t cb, cbAvail;
png_byte buffer[512];
/* Generate 15 more bits of stuff: */
@@ -5001,7 +5000,7 @@
dp->npalette = 0;
/* Preset the transparent color to black: */
memset(&dp->transparent, 0, sizeof dp->transparent);
- /* Preset the palette to full intensity/opaque througout: */
+ /* Preset the palette to full intensity/opaque throughout: */
memset(dp->palette, 0xff, sizeof dp->palette);
}
@@ -5270,7 +5269,7 @@
*/
standard_palette_validate(dp, pp, pi);
- /* In any case always check for a tranparent color (notice that the
+ /* In any case always check for a transparent color (notice that the
* colour type 3 case must not give a successful return on the get_tRNS call
* with these arguments!)
*/
@@ -6780,7 +6779,7 @@
store_image_check(dp->this.ps, pp, 0);
/* Read the palette corresponding to the output if the output colour type
- * indicates a palette, othewise set out_palette to garbage.
+ * indicates a palette, otherwise set out_palette to garbage.
*/
if (out_ct == PNG_COLOR_TYPE_PALETTE)
{
@@ -7991,7 +7990,7 @@
/* Now calculate the actual gray values. Although the error in the
* coefficients depends on whether they were specified on the command
* line (in which case truncation to 15 bits happened) or not (rounding
- * was used) the maxium error in an individual coefficient is always
+ * was used) the maximum error in an individual coefficient is always
* 2/32768, because even in the rounding case the requirement that
* coefficients add up to 32768 can cause a larger rounding error.
*
@@ -8207,7 +8206,7 @@
that->bluef = that->greenf = that->redf = gray;
that->bluee = that->greene = that->rede = err;
- /* The sBIT is the minium of the three colour channel sBITs. */
+ /* The sBIT is the minimum of the three colour channel sBITs. */
if (that->red_sBIT > that->green_sBIT)
that->red_sBIT = that->green_sBIT;
if (that->red_sBIT > that->blue_sBIT)
@@ -9746,7 +9745,7 @@
*
* pngvalid calculations:
* input_sample: linear result; i linearized and composed, range 0..1
- * encoded_sample: encoded result; input_sample scaled to ouput bit depth
+ * encoded_sample: encoded result; input_sample scaled to output bit depth
*
* libpng calculations:
* output: linear result; od scaled to 0..1 and linearized
@@ -10183,10 +10182,10 @@
* Since the library must quantize the output to 8 or 16 bits there is
* a fundamental limit on the accuracy of the output of +/-.5 - this
* quantization limit is included in addition to the other limits
- * specified by the paramaters to the API. (Effectively, add .5
+ * specified by the parameters to the API. (Effectively, add .5
* everywhere.)
*
- * The behavior of the 'sbit' paramter is defined by section 12.5
+ * The behavior of the 'sbit' parameter is defined by section 12.5
* (sample depth scaling) of the PNG spec. That section forces the
* decoder to assume that the PNG values have been scaled if sBIT is
* present:
@@ -11729,7 +11728,7 @@
/* Some default values (set the behavior for 'make check' here).
* These values simply control the maximum error permitted in the gamma
- * transformations. The practial limits for human perception are described
+ * transformations. The practical limits for human perception are described
* below (the setting for maxpc16), however for 8 bit encodings it isn't
* possible to meet the accepted capabilities of human vision - i.e. 8 bit
* images can never be good enough, regardless of encoding.
diff --git a/contrib/libtests/readpng.c b/contrib/libtests/readpng.c
index 3336d4e..60a2d46 100644
--- a/contrib/libtests/readpng.c
+++ b/contrib/libtests/readpng.c
@@ -60,7 +60,7 @@
png_read_info(png_ptr, info_ptr);
{
- png_size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr);
+ size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr);
/* Failure to initialize these is harmless */
row = malloc(rowbytes);
diff --git a/contrib/libtests/tarith.c b/contrib/libtests/tarith.c
index cb17ffa..c95226f 100644
--- a/contrib/libtests/tarith.c
+++ b/contrib/libtests/tarith.c
@@ -108,7 +108,7 @@
do
{
- png_size_t index;
+ size_t index;
int state, failed = 0;
char buffer[64];
@@ -176,7 +176,7 @@
}
else if (PNG_FP_IS_POSITIVE(state) && !(test > 0))
{
- fprintf(stderr, "%g[%d] -> '%s' but postive value not so reported\n",
+ fprintf(stderr, "%g[%d] -> '%s' but positive value not so reported\n",
test, precision, buffer);
failed = 1;
assert(!PNG_FP_IS_NEGATIVE(state));
@@ -329,7 +329,7 @@
{
/* Test this character (ch) to ensure the parser does the correct thing.
*/
- png_size_t index = 0;
+ size_t index = 0;
const char test = (char)ch;
const int number_is_valid = png_check_fp_number(&test, 1, &c.state, &index);
const int character_accepted = (index == 1);
diff --git a/contrib/libtests/timepng.c b/contrib/libtests/timepng.c
index 3bcfde5..23d8b17 100644
--- a/contrib/libtests/timepng.c
+++ b/contrib/libtests/timepng.c
@@ -65,7 +65,7 @@
} io_data;
static PNG_CALLBACK(void, read_and_copy,
- (png_structp png_ptr, png_bytep buffer, png_size_t cb))
+ (png_structp png_ptr, png_bytep buffer, size_t cb))
{
io_data *io = (io_data*)png_get_io_ptr(png_ptr);
@@ -100,7 +100,7 @@
png_read_info(png_ptr, info_ptr);
{
- png_size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr);
+ size_t rowbytes = png_get_rowbytes(png_ptr, info_ptr);
row = voidcast(png_bytep,malloc(rowbytes));
display = voidcast(png_bytep,malloc(rowbytes));
diff --git a/contrib/oss-fuzz/Dockerfile b/contrib/oss-fuzz/Dockerfile
index 7e4d1eb..f5bc1a9 100644
--- a/contrib/oss-fuzz/Dockerfile
+++ b/contrib/oss-fuzz/Dockerfile
@@ -16,9 +16,10 @@
FROM gcr.io/oss-fuzz-base/base-builder
MAINTAINER glennrp@gmail.com
-RUN apt-get update && apt-get install -y make autoconf automake libtool zlib1g-dev
+RUN apt-get update && \
+ apt-get install -y make autoconf automake libtool
+RUN git clone --depth 1 https://github.com/madler/zlib.git
RUN git clone --depth 1 https://github.com/glennrp/libpng.git
-RUN (cd libpng; git log | head -1)
+RUN cp libpng/contrib/oss-fuzz/build.sh $SRC
WORKDIR libpng
-COPY build.sh $SRC/
diff --git a/contrib/oss-fuzz/README.txt b/contrib/oss-fuzz/README.txt
index a2b6736..3b3656f 100644
--- a/contrib/oss-fuzz/README.txt
+++ b/contrib/oss-fuzz/README.txt
@@ -24,13 +24,13 @@
Filename or derived Copyright License
========================= ========== ================ ==========
Dockerfile* derived 2017, Glenn R-P Apache 2.0
- build.sh* derived 2017, Glenn R-P Apache 2.0
+ build.sh derived 2017, Glenn R-P Apache 2.0
libpng_read_fuzzer.cc derived 2017, Glenn R-P Chromium
libpng_read_fuzzer.options original 2015, Chrome Devs Chromium
png.dict original 2015, Chrome Devs Chromium
README.txt (this file) original 2017, Glenn R-P libpng
- * Dockerfile and build.sh are copies of the files used by oss-fuzz.
+ * Dockerfile is a copy of the file used by oss-fuzz. build.sh,
png.dict and libpng_read_fuzzer.* are the actual files used by oss-fuzz,
which retrieves them from the libpng repository at Github.
diff --git a/contrib/oss-fuzz/build.sh b/contrib/oss-fuzz/build.sh
index d2137b1..f9e1b07 100755
--- a/contrib/oss-fuzz/build.sh
+++ b/contrib/oss-fuzz/build.sh
@@ -1,5 +1,5 @@
#!/bin/bash -eu
-# Copyright 2017 Glenn Randers-Pehrson
+# Copyright 2017-2018 Glenn Randers-Pehrson
# Copyright 2016 Google Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
@@ -14,12 +14,13 @@
# See the License for the specific language governing permissions and
# limitations under the License.
#
-# Last changed in libpng 1.6.33 [September 28, 2017]
+# Last changed in libpng 1.6.35 [July 15, 2018]
#
-# Revisions by Glenn Randers-Pehson, 2017:
+# Revisions by Glenn Randers-Pehrson, 2017:
# 1. Build only the library, not the tools (changed "make -j$(nproc) all" to
# "make -j$(nproc) libpng16.la").
# 2. Disabled WARNING and WRITE options in pnglibconf.dfa.
+# 3. Build zlib alongside libpng
################################################################################
# Disable logging via library build configuration control.
@@ -30,9 +31,9 @@
> scripts/pnglibconf.dfa.temp
mv scripts/pnglibconf.dfa.temp scripts/pnglibconf.dfa
-# build the library.
+# build the libpng library.
autoreconf -f -i
-./configure
+./configure --with-libpng-prefix=OSS_FUZZ_
make -j$(nproc) clean
make -j$(nproc) libpng16.la
diff --git a/contrib/oss-fuzz/libpng_read_fuzzer.cc b/contrib/oss-fuzz/libpng_read_fuzzer.cc
index 78c7c9f..7b30550 100644
--- a/contrib/oss-fuzz/libpng_read_fuzzer.cc
+++ b/contrib/oss-fuzz/libpng_read_fuzzer.cc
@@ -1,11 +1,11 @@
// libpng_read_fuzzer.cc
-// Copyright 2017 Glenn Randers-Pehrson
+// Copyright 2017-2018 Glenn Randers-Pehrson
// Copyright 2015 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that may
// be found in the LICENSE file https://cs.chromium.org/chromium/src/LICENSE
-// Last changed in libpng 1.6.32 [August 24, 2017]
+// Last changed in libpng 1.6.35 [July 15, 2018]
// The modifications in 2017 by Glenn Randers-Pehrson include
// 1. addition of a PNG_CLEANUP macro,
@@ -13,6 +13,7 @@
// 3. adding "#include <string.h>" which is needed on some platforms
// to provide memcpy().
// 4. adding read_end_info() and creating an end_info structure.
+// 5. adding calls to png_set_*() transforms commonly used by browsers.
#include <stddef.h>
#include <stdint.h>
@@ -67,7 +68,7 @@
}
};
-void user_read_data(png_structp png_ptr, png_bytep data, png_size_t length) {
+void user_read_data(png_structp png_ptr, png_bytep data, size_t length) {
BufState* buf_state = static_cast<BufState*>(png_get_io_ptr(png_ptr));
if (length > buf_state->bytes_left) {
png_error(png_ptr, "read error");
@@ -136,9 +137,6 @@
// Reading.
png_read_info(png_handler.png_ptr, png_handler.info_ptr);
- png_handler.row_ptr = png_malloc(
- png_handler.png_ptr, png_get_rowbytes(png_handler.png_ptr,
- png_handler.info_ptr));
// reset error handler to put png_deleter into scope.
if (setjmp(png_jmpbuf(png_handler.png_ptr))) {
@@ -163,8 +161,20 @@
return 0;
}
+ // Set several transforms that browsers typically use:
+ png_set_gray_to_rgb(png_handler.png_ptr);
+ png_set_expand(png_handler.png_ptr);
+ png_set_packing(png_handler.png_ptr);
+ png_set_scale_16(png_handler.png_ptr);
+ png_set_tRNS_to_alpha(png_handler.png_ptr);
+
int passes = png_set_interlace_handling(png_handler.png_ptr);
- png_start_read_image(png_handler.png_ptr);
+
+ png_read_update_info(png_handler.png_ptr, png_handler.info_ptr);
+
+ png_handler.row_ptr = png_malloc(
+ png_handler.png_ptr, png_get_rowbytes(png_handler.png_ptr,
+ png_handler.info_ptr));
for (int pass = 0; pass < passes; ++pass) {
for (png_uint_32 y = 0; y < height; ++y) {
diff --git a/contrib/oss-fuzz/newcc b/contrib/oss-fuzz/newcc
deleted file mode 100644
index 0fc9e20..0000000
--- a/contrib/oss-fuzz/newcc
+++ /dev/null
@@ -1,190 +0,0 @@
-
-// libpng_read_fuzzer.cc
-// Copyright 2017 Glenn Randers-Pehrson
-// Copyright 2015 The Chromium Authors. All rights reserved.
-// Use of this source code is governed by a BSD-style license that may
-// be found in the LICENSE file https://cs.chromium.org/chromium/src/LICENSE
-
-// Last changed in libpng 1.6.33beta03 [September 27, 2017]
-
-// The modifications in 2017 by Glenn Randers-Pehrson include
-// 1. addition of a PNG_CLEANUP macro,
-// 2. setting the option to ignore ADLER32 checksums,
-// 3. adding "#include <string.h>" which is needed on some platforms
-// to provide memcpy().
-// 4. adding read_end_info() and creating an end_info structure.
-
-#include <stddef.h>
-#include <stdint.h>
-#include <string.h>
-
-#include <vector>
-
-#define PNG_INTERNAL
-#include "png.h"
-
-struct BufState {
- const uint8_t* data;
- size_t bytes_left;
-};
-
-struct PngObjectHandler {
- png_infop info_ptr = nullptr;
- png_structp png_ptr = nullptr;
- png_infop end_info_ptr = nullptr;
- png_voidp row_ptr = nullptr;
- BufState* buf_state = nullptr;
-
- ~PngObjectHandler() {
- if (row_ptr)
- png_free(png_ptr, row_ptr);
- if (end_info_ptr)
- png_destroy_read_struct(&png_ptr, &info_ptr, &end_info_ptr);
- else if (info_ptr)
- png_destroy_read_struct(&png_ptr, &info_ptr, nullptr);
- else
- png_destroy_read_struct(&png_ptr, nullptr, nullptr);
- delete buf_state;
- }
-};
-
-void user_read_data(png_structp png_ptr, png_bytep data, png_size_t length) {
- BufState* buf_state = static_cast<BufState*>(png_get_io_ptr(png_ptr));
- if (length > buf_state->bytes_left) {
- png_error(png_ptr, "read error");
- }
- memcpy(data, buf_state->data, length);
- buf_state->bytes_left -= length;
- buf_state->data += length;
-}
-
-static const int kPngHeaderSize = 8;
-
-// Entry point for LibFuzzer.
-// Roughly follows the libpng book example:
-// http://www.libpng.org/pub/png/book/chapter13.html
-
-extern "C" int LLVMFuzzerTestOneInput(const uint8_t* data, size_t size) {
- if (size < kPngHeaderSize) {
- return 0;
- }
-
- std::vector<unsigned char> v(data, data + size);
- if (png_sig_cmp(v.data(), 0, kPngHeaderSize)) {
- // not a PNG.
- return 0;
- }
-
- PngObjectHandler png_handler;
- png_handler.png_ptr = nullptr;
- png_handler.row_ptr = nullptr;
- png_handler.info_ptr = nullptr;
- png_handler.end_info_ptr = nullptr;
-
- png_handler.png_ptr = png_create_read_struct
- (PNG_LIBPNG_VER_STRING, nullptr, nullptr, nullptr);
- if (!png_handler.png_ptr) {
- return 0;
- }
-
-#define PNG_CLEANUP \
- if(png_handler.png_ptr) \
- { \
- if (png_handler.row_ptr) \
- png_free(png_handler.png_ptr, png_handler.row_ptr); \
- if (png_handler.end_info_ptr) \
- png_destroy_read_struct(&png_handler.png_ptr, &png_handler.info_ptr,\
- &png_handler.end_info_ptr); \
- else if (png_handler.info_ptr) \
- png_destroy_read_struct(&png_handler.png_ptr, &png_handler.info_ptr,\
- nullptr); \
- else \
- png_destroy_read_struct(&png_handler.png_ptr, nullptr, nullptr); \
- png_handler.png_ptr = nullptr; \
- png_handler.row_ptr = nullptr; \
- png_handler.info_ptr = nullptr; \
- png_handler.end_info_ptr = nullptr; \
- }
-
- png_handler.info_ptr = png_create_info_struct(png_handler.png_ptr);
- if (!png_handler.info_ptr) {
- PNG_CLEANUP
- return 0;
- }
-
- png_handler.end_info_ptr = png_create_info_struct(png_handler.png_ptr);
- if (!png_handler.end_info_ptr) {
- PNG_CLEANUP
- return 0;
- }
-
- /* Treat benign errors as warnings */
- png_set_benign_errors(png_handler.png_ptr, 1);
-
- png_set_crc_action(png_handler.png_ptr, PNG_CRC_QUIET_USE, PNG_CRC_QUIET_USE);
-
-#ifdef PNG_IGNORE_ADLER32
- png_set_option(png_handler.png_ptr, PNG_IGNORE_ADLER32, PNG_OPTION_ON);
-#endif
-
- // Setting up reading from buffer.
- png_handler.buf_state = new BufState();
- png_handler.buf_state->data = data + kPngHeaderSize;
- png_handler.buf_state->bytes_left = size - kPngHeaderSize;
- png_set_read_fn(png_handler.png_ptr, png_handler.buf_state, user_read_data);
- png_set_sig_bytes(png_handler.png_ptr, kPngHeaderSize);
-
- if (setjmp(png_jmpbuf(png_handler.png_ptr))) {
- PNG_CLEANUP
- return 0;
- }
-
- // Reading.
- png_read_info(png_handler.png_ptr, png_handler.info_ptr);
- png_read_update_info(png_handler.png_ptr, png_handler.info_ptr);
- png_handler.row_ptr = png_malloc(
- png_handler.png_ptr, png_get_rowbytes(png_handler.png_ptr,
- png_handler.info_ptr));
-
- // reset error handler to put png_deleter into scope.
- if (setjmp(png_jmpbuf(png_handler.png_ptr))) {
- PNG_CLEANUP
- return 0;
- }
-
- png_uint_32 width, height;
- int bit_depth, color_type, interlace_type, compression_type;
- int filter_type;
-
- if (!png_get_IHDR(png_handler.png_ptr, png_handler.info_ptr, &width,
- &height, &bit_depth, &color_type, &interlace_type,
- &compression_type, &filter_type)) {
- PNG_CLEANUP
- return 0;
- }
-
- // This is going to be too slow.
- if (width && height > 100000000 / width) {
- PNG_CLEANUP
- return 0;
- }
-
- int passes = png_set_interlace_handling(png_handler.png_ptr);
- png_start_read_image(png_handler.png_ptr);
-
- /* To do: prevent the optimizer from removing this code entirely */
- for (int pass = 0; pass < passes; ++pass) {
- for (png_uint_32 y = 0; y < height; ++y) {
- png_read_row(png_handler.png_ptr,
- static_cast<png_bytep>(png_handler.row_ptr), nullptr);
- }
- }
-
- png_read_end(png_handler.png_ptr, png_handler.end_info_ptr);
-
- PNG_CLEANUP
-
- /* TO do: exercise the progressive reader here */
-
- return 0;
-}
diff --git a/contrib/pngminus/README b/contrib/pngminus/README
index fbcfc98..23614a8 100644
--- a/contrib/pngminus/README
+++ b/contrib/pngminus/README
@@ -17,7 +17,7 @@
Some history
------------
Soon after the creation of PNG in 1995, the need was felt for a set of
-pnmtopng / pngtopnm utilities. Independantly Alexander Lehmann and I
+pnmtopng / pngtopnm utilities. Independently Alexander Lehmann and I
(Willem van Schaik) started such a project. Luckily we discovered this
and merged the two together into pnmtopng.tar.gz, which is available
from a/o ftp://ftp.simplesystems.org/pub/libpng/png/.
diff --git a/contrib/pngminus/png2pnm.bat b/contrib/pngminus/png2pnm.bat
index 449cf36..a2798c3 100755
--- a/contrib/pngminus/png2pnm.bat
+++ b/contrib/pngminus/png2pnm.bat
@@ -7,7 +7,7 @@
REM -- full-color
png2pnm.exe -noraw ..\pngsuite\basn2c08.png basn2c08.ppm
png2pnm.exe -noraw ..\pngsuite\basn2c16.png basn2c16.ppm
-REM -- palletted
+REM -- paletted
png2pnm.exe -noraw ..\pngsuite\basn3p01.png basn3p01.ppm
png2pnm.exe -noraw ..\pngsuite\basn3p02.png basn3p02.ppm
png2pnm.exe -noraw ..\pngsuite\basn3p04.png basn3p04.ppm
@@ -27,7 +27,7 @@
REM -- full-color
png2pnm.exe -raw ..\pngsuite\basn2c08.png rawn2c08.ppm
png2pnm.exe -raw ..\pngsuite\basn2c16.png rawn2c16.ppm
-REM -- palletted
+REM -- paletted
png2pnm.exe -raw ..\pngsuite\basn3p01.png rawn3p01.ppm
png2pnm.exe -raw ..\pngsuite\basn3p02.png rawn3p02.ppm
png2pnm.exe -raw ..\pngsuite\basn3p04.png rawn3p04.ppm
diff --git a/contrib/pngminus/png2pnm.sh b/contrib/pngminus/png2pnm.sh
index b1c0537..756126a 100755
--- a/contrib/pngminus/png2pnm.sh
+++ b/contrib/pngminus/png2pnm.sh
@@ -8,7 +8,7 @@
# -- full-color
./png2pnm -noraw ../pngsuite/basn2c08.png basn2c08.ppm
./png2pnm -noraw ../pngsuite/basn2c16.png basn2c16.ppm
-# -- palletted
+# -- paletted
./png2pnm -noraw ../pngsuite/basn3p01.png basn3p01.ppm
./png2pnm -noraw ../pngsuite/basn3p02.png basn3p02.ppm
./png2pnm -noraw ../pngsuite/basn3p04.png basn3p04.ppm
@@ -28,7 +28,7 @@
# -- full-color
./png2pnm -raw ../pngsuite/basn2c08.png rawn2c08.ppm
./png2pnm -raw ../pngsuite/basn2c16.png rawn2c16.ppm
-# -- palletted
+# -- paletted
./png2pnm -raw ../pngsuite/basn3p01.png rawn3p01.ppm
./png2pnm -raw ../pngsuite/basn3p02.png rawn3p02.ppm
./png2pnm -raw ../pngsuite/basn3p04.png rawn3p04.ppm
diff --git a/contrib/pngminus/pnm2png.bat b/contrib/pngminus/pnm2png.bat
index f756cb8..c02b80b 100755
--- a/contrib/pngminus/pnm2png.bat
+++ b/contrib/pngminus/pnm2png.bat
@@ -7,7 +7,7 @@
REM -- full-color
pnm2png.exe basn2c08.ppm basn2c08.png
pnm2png.exe basn2c16.ppm basn2c16.png
-REM -- palletted
+REM -- paletted
pnm2png.exe basn3p01.ppm basn3p01.png
pnm2png.exe basn3p02.ppm basn3p02.png
pnm2png.exe basn3p04.ppm basn3p04.png
@@ -27,7 +27,7 @@
REM -- full-color
pnm2png.exe rawn2c08.ppm rawn2c08.png
pnm2png.exe rawn2c16.ppm rawn2c16.png
-REM -- palletted
+REM -- paletted
pnm2png.exe rawn3p01.ppm rawn3p01.png
pnm2png.exe rawn3p02.ppm rawn3p02.png
pnm2png.exe rawn3p04.ppm rawn3p04.png
diff --git a/contrib/pngminus/pnm2png.sh b/contrib/pngminus/pnm2png.sh
index d79df2f..2ad17a6 100755
--- a/contrib/pngminus/pnm2png.sh
+++ b/contrib/pngminus/pnm2png.sh
@@ -8,7 +8,7 @@
# -- full-color
./pnm2png basn2c08.ppm basn2c08.png
./pnm2png basn2c16.ppm basn2c16.png
-# -- palletted
+# -- paletted
./pnm2png basn3p01.ppm basn3p01.png
./pnm2png basn3p02.ppm basn3p02.png
./pnm2png basn3p04.ppm basn3p04.png
@@ -28,7 +28,7 @@
# -- full-color
./pnm2png rawn2c08.ppm rawn2c08.png
./pnm2png rawn2c16.ppm rawn2c16.png
-# -- palletted
+# -- paletted
./pnm2png rawn3p01.ppm rawn3p01.png
./pnm2png rawn3p02.ppm rawn3p02.png
./pnm2png rawn3p04.ppm rawn3p04.png
diff --git a/contrib/pngsuite/README b/contrib/pngsuite/README
index 53ba5c8..d236b02 100644
--- a/contrib/pngsuite/README
+++ b/contrib/pngsuite/README
@@ -16,6 +16,8 @@
The "ft*.png" images are "free/libre" replacements for the transparent
corresponding t*.png images in the PngSuite.
+The "i*.png" images are the same images, but interlaced.
+
The images in this directory represent the basic PNG color-types:
grayscale (1-16 bit deep), full color (8 or 16 bit), paletted
(1-8 bit) and grayscale or color images with alpha channel. You
diff --git a/contrib/pngsuite/bad_interlace_conversions.txt b/contrib/pngsuite/bad_interlace_conversions.txt
new file mode 100644
index 0000000..8afbde7
--- /dev/null
+++ b/contrib/pngsuite/bad_interlace_conversions.txt
@@ -0,0 +1,9 @@
+basn0g01.png
+basn0g02.png
+basn0g04.png
+basn3p01.png
+basn3p02.png
+basn3p04.png
+ftbbn0g01.png
+ftbbn0g02.png
+ftbbn0g04.png
diff --git a/contrib/pngsuite/ibasn0g08.png b/contrib/pngsuite/ibasn0g08.png
new file mode 100644
index 0000000..90b5305
--- /dev/null
+++ b/contrib/pngsuite/ibasn0g08.png
Binary files differ
diff --git a/contrib/pngsuite/ibasn0g16.png b/contrib/pngsuite/ibasn0g16.png
new file mode 100644
index 0000000..c82f230
--- /dev/null
+++ b/contrib/pngsuite/ibasn0g16.png
Binary files differ
diff --git a/contrib/pngsuite/ibasn2c08.png b/contrib/pngsuite/ibasn2c08.png
new file mode 100644
index 0000000..05d4688
--- /dev/null
+++ b/contrib/pngsuite/ibasn2c08.png
Binary files differ
diff --git a/contrib/pngsuite/ibasn2c16.png b/contrib/pngsuite/ibasn2c16.png
new file mode 100644
index 0000000..399f1be
--- /dev/null
+++ b/contrib/pngsuite/ibasn2c16.png
Binary files differ
diff --git a/contrib/pngsuite/ibasn3p08.png b/contrib/pngsuite/ibasn3p08.png
new file mode 100644
index 0000000..6df8370
--- /dev/null
+++ b/contrib/pngsuite/ibasn3p08.png
Binary files differ
diff --git a/contrib/pngsuite/ibasn4a08.png b/contrib/pngsuite/ibasn4a08.png
new file mode 100644
index 0000000..bda8e3c
--- /dev/null
+++ b/contrib/pngsuite/ibasn4a08.png
Binary files differ
diff --git a/contrib/pngsuite/ibasn4a16.png b/contrib/pngsuite/ibasn4a16.png
new file mode 100644
index 0000000..500f912
--- /dev/null
+++ b/contrib/pngsuite/ibasn4a16.png
Binary files differ
diff --git a/contrib/pngsuite/ibasn6a08.png b/contrib/pngsuite/ibasn6a08.png
new file mode 100644
index 0000000..258f940
--- /dev/null
+++ b/contrib/pngsuite/ibasn6a08.png
Binary files differ
diff --git a/contrib/pngsuite/ibasn6a16.png b/contrib/pngsuite/ibasn6a16.png
new file mode 100644
index 0000000..e4de69f
--- /dev/null
+++ b/contrib/pngsuite/ibasn6a16.png
Binary files differ
diff --git a/contrib/pngsuite/iftbbn2c16.png b/contrib/pngsuite/iftbbn2c16.png
new file mode 100644
index 0000000..64a9cdf
--- /dev/null
+++ b/contrib/pngsuite/iftbbn2c16.png
Binary files differ
diff --git a/contrib/pngsuite/iftbbn3p08.png b/contrib/pngsuite/iftbbn3p08.png
new file mode 100644
index 0000000..47d6eeb
--- /dev/null
+++ b/contrib/pngsuite/iftbbn3p08.png
Binary files differ
diff --git a/contrib/pngsuite/iftbgn2c16.png b/contrib/pngsuite/iftbgn2c16.png
new file mode 100644
index 0000000..64a9cdf
--- /dev/null
+++ b/contrib/pngsuite/iftbgn2c16.png
Binary files differ
diff --git a/contrib/pngsuite/iftbgn3p08.png b/contrib/pngsuite/iftbgn3p08.png
new file mode 100644
index 0000000..47d6eeb
--- /dev/null
+++ b/contrib/pngsuite/iftbgn3p08.png
Binary files differ
diff --git a/contrib/pngsuite/iftbrn2c08.png b/contrib/pngsuite/iftbrn2c08.png
new file mode 100644
index 0000000..08ebbae
--- /dev/null
+++ b/contrib/pngsuite/iftbrn2c08.png
Binary files differ
diff --git a/contrib/pngsuite/iftbwn0g16.png b/contrib/pngsuite/iftbwn0g16.png
new file mode 100644
index 0000000..4b7537e
--- /dev/null
+++ b/contrib/pngsuite/iftbwn0g16.png
Binary files differ
diff --git a/contrib/pngsuite/iftbwn3p08.png b/contrib/pngsuite/iftbwn3p08.png
new file mode 100644
index 0000000..47d6eeb
--- /dev/null
+++ b/contrib/pngsuite/iftbwn3p08.png
Binary files differ
diff --git a/contrib/pngsuite/iftbyn3p08.png b/contrib/pngsuite/iftbyn3p08.png
new file mode 100644
index 0000000..47d6eeb
--- /dev/null
+++ b/contrib/pngsuite/iftbyn3p08.png
Binary files differ
diff --git a/contrib/pngsuite/iftp0n0g08.png b/contrib/pngsuite/iftp0n0g08.png
new file mode 100644
index 0000000..aa826b8
--- /dev/null
+++ b/contrib/pngsuite/iftp0n0g08.png
Binary files differ
diff --git a/contrib/pngsuite/iftp0n2c08.png b/contrib/pngsuite/iftp0n2c08.png
new file mode 100644
index 0000000..b12bd0a
--- /dev/null
+++ b/contrib/pngsuite/iftp0n2c08.png
Binary files differ
diff --git a/contrib/pngsuite/iftp0n3p08.png b/contrib/pngsuite/iftp0n3p08.png
new file mode 100644
index 0000000..37aa0cb
--- /dev/null
+++ b/contrib/pngsuite/iftp0n3p08.png
Binary files differ
diff --git a/contrib/pngsuite/iftp1n3p08.png b/contrib/pngsuite/iftp1n3p08.png
new file mode 100644
index 0000000..47d6eeb
--- /dev/null
+++ b/contrib/pngsuite/iftp1n3p08.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/README b/contrib/pngsuite/interlaced/README
new file mode 100644
index 0000000..f171eee
--- /dev/null
+++ b/contrib/pngsuite/interlaced/README
@@ -0,0 +1,2 @@
+
+These images fail the "pngimage-quick" and "pngimage-full" tests.
diff --git a/contrib/pngsuite/interlaced/ibasn0g01.png b/contrib/pngsuite/interlaced/ibasn0g01.png
new file mode 100644
index 0000000..828fa76
--- /dev/null
+++ b/contrib/pngsuite/interlaced/ibasn0g01.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/ibasn0g02.png b/contrib/pngsuite/interlaced/ibasn0g02.png
new file mode 100644
index 0000000..7fc17e3
--- /dev/null
+++ b/contrib/pngsuite/interlaced/ibasn0g02.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/ibasn0g04.png b/contrib/pngsuite/interlaced/ibasn0g04.png
new file mode 100644
index 0000000..1beade2
--- /dev/null
+++ b/contrib/pngsuite/interlaced/ibasn0g04.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/ibasn3p01.png b/contrib/pngsuite/interlaced/ibasn3p01.png
new file mode 100644
index 0000000..f91e723
--- /dev/null
+++ b/contrib/pngsuite/interlaced/ibasn3p01.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/ibasn3p02.png b/contrib/pngsuite/interlaced/ibasn3p02.png
new file mode 100644
index 0000000..0f9ce76
--- /dev/null
+++ b/contrib/pngsuite/interlaced/ibasn3p02.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/ibasn3p04.png b/contrib/pngsuite/interlaced/ibasn3p04.png
new file mode 100644
index 0000000..b2ca720
--- /dev/null
+++ b/contrib/pngsuite/interlaced/ibasn3p04.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/iftbbn0g01.png b/contrib/pngsuite/interlaced/iftbbn0g01.png
new file mode 100644
index 0000000..6eb27d1
--- /dev/null
+++ b/contrib/pngsuite/interlaced/iftbbn0g01.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/iftbbn0g02.png b/contrib/pngsuite/interlaced/iftbbn0g02.png
new file mode 100644
index 0000000..46ba497
--- /dev/null
+++ b/contrib/pngsuite/interlaced/iftbbn0g02.png
Binary files differ
diff --git a/contrib/pngsuite/interlaced/iftbbn0g04.png b/contrib/pngsuite/interlaced/iftbbn0g04.png
new file mode 100644
index 0000000..e9db0ad
--- /dev/null
+++ b/contrib/pngsuite/interlaced/iftbbn0g04.png
Binary files differ
diff --git a/contrib/powerpc-vsx/README b/contrib/powerpc-vsx/README
index e566147..4970a52 100644
--- a/contrib/powerpc-vsx/README
+++ b/contrib/powerpc-vsx/README
@@ -46,7 +46,7 @@
static int png_have_vsx(png_structp png_ptr);
-That function must return 1 if ARM NEON instructions are supported, 0 if not.
+That function must return 1 if POWERPC_VSX instructions are supported, 0 if not.
It must not execute png_error unless it detects a bug. A png_error will prevent
the reading of the PNG and in the future, writing too.
diff --git a/contrib/testpngs/makepngs.sh b/contrib/testpngs/makepngs.sh
index 059503e..eb1c15f 100755
--- a/contrib/testpngs/makepngs.sh
+++ b/contrib/testpngs/makepngs.sh
@@ -74,7 +74,7 @@
--coverage)
# Comments below indicate cases known to be required and not duplicated
# in other (required) cases; the aim is to get a minimal set that gives
- # the maxium code coverage.
+ # the maximum code coverage.
mpg none gray-alpha 8 # required: code coverage, sRGB opaque component
mpg none palette 8 # required: basic palette read
mpg 1.8 gray 2 # required: tests gamma threshold code
diff --git a/contrib/tools/chkfmt b/contrib/tools/chkfmt
index a1b88cc..95181fd 100755
--- a/contrib/tools/chkfmt
+++ b/contrib/tools/chkfmt
@@ -54,7 +54,7 @@
}
# In beta versions the version string which appears in files can be a little
-# long and cause spuriously overlong lines. To avoid this subtitute the version
+# long and cause spuriously overlong lines. To avoid this substitute the version
# string with a 'standard' version a.b.cc before checking for long lines.
if test -r png.h
then
diff --git a/contrib/tools/pngcp.c b/contrib/tools/pngcp.c
index e82dddc..f6a0d50 100644
--- a/contrib/tools/pngcp.c
+++ b/contrib/tools/pngcp.c
@@ -191,7 +191,7 @@
/* This controls the order of search. */
{ "huffman", Z_HUFFMAN_ONLY },
{ "RLE", Z_RLE },
- { "fixed", Z_FIXED }, /* the remainder do window searchs */
+ { "fixed", Z_FIXED }, /* the remainder do window searches */
{ "filtered", Z_FILTERED },
{ "default", Z_DEFAULT_STRATEGY },
{ all, 0 }
@@ -336,7 +336,7 @@
# define VLC(name) VLCIDAT(name) VLCiCCP(name) VLCzTXt(name)
# ifdef PNG_SW_COMPRESS_png_level
- /* The libpng compression level isn't searched beause it justs sets the
+ /* The libpng compression level isn't searched because it justs sets the
* other things that are searched!
*/
VLO("compression", compression, 0)
@@ -1725,7 +1725,7 @@
}
static void PNGCBAPI
-read_function(png_structp pp, png_bytep data, png_size_t size)
+read_function(png_structp pp, png_bytep data, size_t size)
{
struct display *dp = get_dp(pp);
@@ -1881,7 +1881,7 @@
}
static void PNGCBAPI
-write_function(png_structp pp, png_bytep data, png_size_t size)
+write_function(png_structp pp, png_bytep data, size_t size)
{
struct display *dp = get_dp(pp);
@@ -2117,7 +2117,7 @@
*
* This function looks through the stack from the bottom up looking for an
* option that does not match the current best value. When it finds one it
- * checks to see if it is more or less desireable and returns true or false
+ * checks to see if it is more or less desirable and returns true or false
* as appropriate.
*
* Notice that this means that the order options are pushed onto the stack
diff --git a/contrib/tools/pngfix.c b/contrib/tools/pngfix.c
index 69ffc17..f494230 100644
--- a/contrib/tools/pngfix.c
+++ b/contrib/tools/pngfix.c
@@ -2363,7 +2363,7 @@
flush = Z_NO_FLUSH;
out_bytes = 0;
- /* NOTE: expression 3 is only evaluted on 'continue', because of the
+ /* NOTE: expression 3 is only evaluated on 'continue', because of the
* 'break' at the end of this loop below.
*/
for (;endrc == ZLIB_OK;
@@ -2664,7 +2664,7 @@
* this case, so do the optimization anyway.
*/
if (zlib.cksum)
- chunk_message(zlib.chunk, "zlib checkum");
+ chunk_message(zlib.chunk, "zlib checksum");
break;
@@ -3678,7 +3678,7 @@
size_t i;
static const char *usage_string[] = {
" Tests, optimizes and optionally fixes the zlib header in PNG files.",
-" Optionally, when fixing, strips ancilliary chunks from the file.",
+" Optionally, when fixing, strips ancillary chunks from the file.",
0,
"OPTIONS",
" OPERATION",
diff --git a/contrib/visupng/PngFile.c b/contrib/visupng/PngFile.c
index d46318f..cf943f3 100644
--- a/contrib/visupng/PngFile.c
+++ b/contrib/visupng/PngFile.c
@@ -410,15 +410,14 @@
#ifndef PNG_STDIO_SUPPORTED
static void
-png_read_data(png_structp png_ptr, png_bytep data, png_size_t length)
+png_read_data(png_structp png_ptr, png_bytep data, size_t length)
{
- png_size_t check;
+ size_t check;
- /* fread() returns 0 on error, so it is OK to store this in a png_size_t
+ /* fread() returns 0 on error, so it is OK to store this in a size_t
* instead of an int, which is what fread() actually returns.
*/
- check = (png_size_t)fread(data, (png_size_t)1, length,
- (FILE *)png_ptr->io_ptr);
+ check = fread(data, 1, length, (FILE *)png_ptr->io_ptr);
if (check != length)
{
@@ -427,7 +426,7 @@
}
static void
-png_write_data(png_structp png_ptr, png_bytep data, png_size_t length)
+png_write_data(png_structp png_ptr, png_bytep data, size_t length)
{
png_uint_32 check;
diff --git a/contrib/visupng/PngFile.h b/contrib/visupng/PngFile.h
index 474426c..1b7b9be 100644
--- a/contrib/visupng/PngFile.h
+++ b/contrib/visupng/PngFile.h
@@ -23,8 +23,8 @@
int iWidth, int iHeight, png_color BkgColor);
#ifndef PNG_STDIO_SUPPORTED
-static void png_read_data(png_structp png_ptr, png_bytep data, png_size_t length);
-static void png_write_data(png_structp png_ptr, png_bytep data, png_size_t length);
+static void png_read_data(png_structp png_ptr, png_bytep data, size_t length);
+static void png_write_data(png_structp png_ptr, png_bytep data, size_t length);
static void png_flush(png_structp png_ptr);
#endif
diff --git a/contrib/visupng/VisualPng.c b/contrib/visupng/VisualPng.c
index 20e1625..6baa3b6 100644
--- a/contrib/visupng/VisualPng.c
+++ b/contrib/visupng/VisualPng.c
@@ -716,7 +716,7 @@
png_color bkgGray = {127, 127, 127};
png_color bkgWhite = {255, 255, 255};
- /* allocate memory for the Device Independant bitmap */
+ /* allocate memory for the Device Independent bitmap */
wDIRowBytes = (WORD) ((3 * cxWinSize + 3L) >> 2) << 2;
diff --git a/depcomp b/depcomp
new file mode 100755
index 0000000..65cbf70
--- /dev/null
+++ b/depcomp
@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say). Also, it might not be
+## supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'. On the theory
+## that the space means something, we add a space to the output as
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
+ "$@" -MDupdate "$tmpdepfile"
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+
+ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
+ echo "$object : \\" > "$depfile"
+ # Clip off the initial element (the dependent). Don't try to be
+ # clever and replace this with sed code, as IRIX sed won't handle
+ # lines with more than a fixed number of characters (4096 in
+ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
+ # the IRIX cc adds comments like '#:fec' to the end of the
+ # dependency line.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
+ echo >> "$depfile"
+ # The second pass generates a dummy entry for each header file.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
+ else
+ make_dummy_depfile
+ fi
+ rm -f "$tmpdepfile"
+ ;;
+
+xlc)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+aix)
+ # The C for AIX Compiler uses -M and outputs the dependencies
+ # in a .u file. In older versions, this file always lives in the
+ # current directory. Also, the AIX compiler puts '$object:' at the
+ # start of each line; $object doesn't have directory information.
+ # Version 6 uses the directory in both cases.
+ set_dir_from "$object"
+ set_base_from "$object"
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$base.u
+ tmpdepfile3=$dir.libs/$base.u
+ "$@" -Wc,-M
+ else
+ tmpdepfile1=$dir$base.u
+ tmpdepfile2=$dir$base.u
+ tmpdepfile3=$dir$base.u
+ "$@" -M
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ aix_post_process_depfile
+ ;;
+
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file. A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+ # Portland's C compiler understands '-MD'.
+ # Will always output deps to 'file.d' where file is the root name of the
+ # source file under compilation, even if file resides in a subdirectory.
+ # The object file name does not affect the name of the '.d' file.
+ # pgcc 10.2 will output
+ # foo.o: sub/foo.c sub/foo.h
+ # and will wrap long lines using '\' :
+ # foo.o: sub/foo.c ... \
+ # sub/foo.h ... \
+ # ...
+ set_dir_from "$object"
+ # Use the source, not the object, to determine the base name, since
+ # that's sadly what pgcc will do too.
+ set_base_from "$source"
+ tmpdepfile=$base.d
+
+ # For projects that build the same source file twice into different object
+ # files, the pgcc approach of using the *source* file root name can cause
+ # problems in parallel builds. Use a locking strategy to avoid stomping on
+ # the same $tmpdepfile.
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
+ numtries=100
+ i=$numtries
+ while test $i -gt 0; do
+ # mkdir is a portable test-and-set.
+ if mkdir "$lockdir" 2>/dev/null; then
+ # This process acquired the lock.
+ "$@" -MD
+ stat=$?
+ # Release the lock.
+ rmdir "$lockdir"
+ break
+ else
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
+ sleep 1
+ i=`expr $i - 1`
+ done
+ fi
+ i=`expr $i - 1`
+ done
+ trap - 1 2 13 15
+ if test $i -le 0; then
+ echo "$0: failed to acquire lock after $numtries attempts" >&2
+ echo "$0: check lockdir '$lockdir'" >&2
+ exit 1
+ fi
+
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+ # Do two passes, one to just change these to
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp2)
+ # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+ # compilers, which have integrated preprocessors. The correct option
+ # to use with these is +Maked; it writes dependencies to a file named
+ # 'foo.d', which lands next to the object file, wherever that
+ # happens to be.
+ # Much of this is similar to the tru64 case; see comments there.
+ set_dir_from "$object"
+ set_base_from "$object"
+ if test "$libtool" = yes; then
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir.libs/$base.d
+ "$@" -Wc,+Maked
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ "$@" +Maked
+ fi
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ if test -f "$tmpdepfile"; then
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+ # Add 'dependent.h:' lines.
+ sed -ne '2,${
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
+ else
+ make_dummy_depfile
+ fi
+ rm -f "$tmpdepfile" "$tmpdepfile2"
+ ;;
+
+tru64)
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
+
+msvc7)
+ if test "$libtool" = yes; then
+ showIncludes=-Wc,-showIncludes
+ else
+ showIncludes=-showIncludes
+ fi
+ "$@" $showIncludes > "$tmpdepfile"
+ stat=$?
+ grep -v '^Note: including file: ' "$tmpdepfile"
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ # The first sed program below extracts the file names and escapes
+ # backslashes for cygpath. The second sed program outputs the file
+ # name when reading, but also accumulates all include files in the
+ # hold buffer in order to output them again at the end. This only
+ # works with sed implementations that can handle large buffers.
+ sed < "$tmpdepfile" -n '
+/^Note: including file: *\(.*\)/ {
+ s//\1/
+ s/\\/\\\\/g
+ p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+ s/.*/'"$tab"'/
+ G
+ p
+}' >> "$depfile"
+ echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+ rm -f "$tmpdepfile"
+ ;;
+
+msvc7msys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+#nosideeffect)
+ # This comment above is used by automake to tell side-effect
+ # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout, regardless of -o.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ test -z "$dashmflag" && dashmflag=-M
+ # Require at least two characters before searching for ':'
+ # in the target name. This is to cope with DOS-style filenames:
+ # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+ "$@" $dashmflag |
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+ rm -f "$depfile"
+ cat < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+dashXmstdout)
+ # This case only exists to satisfy depend.m4. It is never actually
+ # run, as this mode is specially recognized in the preamble.
+ exit 1
+ ;;
+
+makedepend)
+ "$@" || exit $?
+ # Remove any Libtool call
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+ # X makedepend
+ shift
+ cleared=no eat=no
+ for arg
+ do
+ case $cleared in
+ no)
+ set ""; shift
+ cleared=yes ;;
+ esac
+ if test $eat = yes; then
+ eat=no
+ continue
+ fi
+ case "$arg" in
+ -D*|-I*)
+ set fnord "$@" "$arg"; shift ;;
+ # Strip any option that makedepend may not understand. Remove
+ # the object too, otherwise makedepend will parse it as a source file.
+ -arch)
+ eat=yes ;;
+ -*|$object)
+ ;;
+ *)
+ set fnord "$@" "$arg"; shift ;;
+ esac
+ done
+ obj_suffix=`echo "$object" | sed 's/^.*\././'`
+ touch "$tmpdepfile"
+ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+ rm -f "$depfile"
+ # makedepend may prepend the VPATH from the source file name to the object.
+ # No need to regex-escape $object, excess matching of '.' is harmless.
+ sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile" "$tmpdepfile".bak
+ ;;
+
+cpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ # Remove '-o $object'.
+ IFS=" "
+ for arg
+ do
+ case $arg in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift # fnord
+ shift # $arg
+ ;;
+ esac
+ done
+
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ cat < "$tmpdepfile" >> "$depfile"
+ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvisualcpp)
+ # Important note: in order to support this mode, a compiler *must*
+ # always write the preprocessed file to stdout.
+ "$@" || exit $?
+
+ # Remove the call to Libtool.
+ if test "$libtool" = yes; then
+ while test "X$1" != 'X--mode=compile'; do
+ shift
+ done
+ shift
+ fi
+
+ IFS=" "
+ for arg
+ do
+ case "$arg" in
+ -o)
+ shift
+ ;;
+ $object)
+ shift
+ ;;
+ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+ set fnord "$@"
+ shift
+ shift
+ ;;
+ *)
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
+ esac
+ done
+ "$@" -E 2>/dev/null |
+ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+ echo "$tab" >> "$depfile"
+ sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+msvcmsys)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+none)
+ exec "$@"
+ ;;
+
+*)
+ echo "Unknown depmode $depmode" 1>&2
+ exit 1
+ ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/example.c b/example.c
index 99d2f05..34ecfde 100644
--- a/example.c
+++ b/example.c
@@ -2,13 +2,14 @@
#if 0 /* in case someone actually tries to compile this */
/* example.c - an example of using libpng
- * Last changed in libpng 1.6.24 [August 4, 2016]
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Maintained 2018 Cosmin Truta
* Maintained 1998-2016 Glenn Randers-Pehrson
* Maintained 1996, 1997 Andreas Dilger)
* Written 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
* To the extent possible under law, the authors have waived
* all copyright and related or neighboring rights to this file.
- * This work is published from: United States.
+ * This work is published from: United States, Canada.
*/
/* This is an example of how to use libpng to read and write PNG files.
@@ -257,7 +258,7 @@
/* Compare the first PNG_BYTES_TO_CHECK bytes of the signature.
Return nonzero (true) if they match */
- return(!png_sig_cmp(buf, (png_size_t)0, PNG_BYTES_TO_CHECK));
+ return(!png_sig_cmp(buf, 0, PNG_BYTES_TO_CHECK));
}
/* Read a PNG file. You may want to return an error code if the read
diff --git a/install-sh b/install-sh
new file mode 100755
index 0000000..8175c64
--- /dev/null
+++ b/install-sh
@@ -0,0 +1,518 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2018-03-11.20; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab=' '
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) is_target_a_directory=never;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
+ fi
+ # It's OK to call 'install-sh -d' without argument.
+ # This can happen when creating conditional directories.
+ exit 0
+fi
+
+if test -z "$dir_arg"; then
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+
+if test -z "$dir_arg"; then
+ do_exit='(exit $ret); exit $ret'
+ trap "ret=129; $do_exit" 1
+ trap "ret=130; $do_exit" 2
+ trap "ret=141; $do_exit" 13
+ trap "ret=143; $do_exit" 15
+
+ # Set umask so as not to create temps with too-generous modes.
+ # However, 'strip' requires both read and write access to temps.
+ case $mode in
+ # Optimize common cases.
+ *644) cp_umask=133;;
+ *755) cp_umask=22;;
+
+ *[0-7])
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw='% 200'
+ fi
+ cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+ *)
+ if test -z "$stripcmd"; then
+ u_plus_rw=
+ else
+ u_plus_rw=,u+rw
+ fi
+ cp_umask=$mode$u_plus_rw;;
+ esac
+fi
+
+for src
+do
+ # Protect names problematic for 'test' and other utilities.
+ case $src in
+ -* | [=\(\)!]) src=./$src;;
+ esac
+
+ if test -n "$dir_arg"; then
+ dst=$src
+ dstdir=$dst
+ test -d "$dstdir"
+ dstdir_status=$?
+ else
+
+ # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+ # might cause directories to be created, which would be especially bad
+ # if $src (and thus $dsttmp) contains '*'.
+ if test ! -f "$src" && test ! -d "$src"; then
+ echo "$0: $src does not exist." >&2
+ exit 1
+ fi
+
+ if test -z "$dst_arg"; then
+ echo "$0: no destination specified." >&2
+ exit 1
+ fi
+ dst=$dst_arg
+
+ # If destination is a directory, append the input filename.
+ if test -d "$dst"; then
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
+ fi
+ dstdir=$dst
+ dstbase=`basename "$src"`
+ case $dst in
+ */) dst=$dst$dstbase;;
+ *) dst=$dst/$dstbase;;
+ esac
+ dstdir_status=0
+ else
+ dstdir=`dirname "$dst"`
+ test -d "$dstdir"
+ dstdir_status=$?
+ fi
+ fi
+
+ case $dstdir in
+ */) dstdirslash=$dstdir;;
+ *) dstdirslash=$dstdir/;;
+ esac
+
+ obsolete_mkdir_used=false
+
+ if test $dstdir_status != 0; then
+ case $posix_mkdir in
+ '')
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
+
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
+
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ # Note that $RANDOM variable is not portable (e.g. dash); Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+
+ trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p' feature.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
+ esac
+
+ if
+ $posix_mkdir && (
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ )
+ then :
+ else
+
+ # The umask is ridiculous, or mkdir does not conform to POSIX,
+ # or it failed possibly due to a race condition. Create the
+ # directory the slow way, step by step, checking for races as we go.
+
+ case $dstdir in
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
+ esac
+
+ oIFS=$IFS
+ IFS=/
+ set -f
+ set fnord $dstdir
+ shift
+ set +f
+ IFS=$oIFS
+
+ prefixes=
+
+ for d
+ do
+ test X"$d" = X && continue
+
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
+ done
+
+ if test -n "$prefixes"; then
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
+ fi
+ fi
+ fi
+
+ if test -n "$dir_arg"; then
+ { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+ { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+ else
+
+ # Make a couple of temp file names in the proper directory.
+ dsttmp=${dstdirslash}_inst.$$_
+ rmtmp=${dstdirslash}_rm.$$_
+
+ # Trap to clean up those temp files at exit.
+ trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+ # Copy the file name to the temp name.
+ (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+ # and set any options; do chmod last to preserve setuid bits.
+ #
+ # If any of these fail, we abort the whole thing. If we want to
+ # ignore errors from any of these, just make sure not to ignore
+ # errors from the above "$doit $cpprog $src $dsttmp" command.
+ #
+ { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+ { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+ { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+ { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+ # If -C, don't bother to copy if it wouldn't change the file.
+ if $copy_on_change &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
+ set X $old && old=:$2:$4:$5:$6 &&
+ set X $new && new=:$2:$4:$5:$6 &&
+ set +f &&
+ test "$old" = "$new" &&
+ $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+ then
+ rm -f "$dsttmp"
+ else
+ # Rename the file to the real destination.
+ $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+ # The rename failed, perhaps because mv can't rename something else
+ # to itself, or perhaps because mv is so ancient that it does not
+ # support -f.
+ {
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
+
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
+ }
+ fi || exit 1
+
+ trap '' 0
+ fi
+done
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/intel/filter_sse2_intrinsics.c b/intel/filter_sse2_intrinsics.c
index 5e8553f..ef1fc7d 100644
--- a/intel/filter_sse2_intrinsics.c
+++ b/intel/filter_sse2_intrinsics.c
@@ -71,7 +71,7 @@
* There is no pixel to the left of the first pixel. It's encoded directly.
* That works with our main loop if we just say that left pixel was zero.
*/
- png_size_t rb;
+ size_t rb;
__m128i a, d = _mm_setzero_si128();
@@ -104,7 +104,7 @@
* There is no pixel to the left of the first pixel. It's encoded directly.
* That works with our main loop if we just say that left pixel was zero.
*/
- png_size_t rb;
+ size_t rb;
__m128i a, d = _mm_setzero_si128();
@@ -131,7 +131,7 @@
* perfectly with our loop if we make sure a starts at zero.
*/
- png_size_t rb;
+ size_t rb;
const __m128i zero = _mm_setzero_si128();
@@ -185,7 +185,7 @@
* predicted to be half of the pixel above it. So again, this works
* perfectly with our loop if we make sure a starts at zero.
*/
- png_size_t rb;
+ size_t rb;
const __m128i zero = _mm_setzero_si128();
__m128i b;
__m128i a, d = zero;
@@ -257,7 +257,7 @@
* Here we zero b and d, which become c and a respectively at the start of
* the loop.
*/
- png_size_t rb;
+ size_t rb;
const __m128i zero = _mm_setzero_si128();
__m128i c, b = zero,
a, d = zero;
@@ -356,7 +356,7 @@
* Here we zero b and d, which become c and a respectively at the start of
* the loop.
*/
- png_size_t rb;
+ size_t rb;
const __m128i zero = _mm_setzero_si128();
__m128i pa,pb,pc,smallest,nearest;
__m128i c, b = zero,
diff --git a/libpng-manual.txt b/libpng-manual.txt
index d4407ef..b14a534 100644
--- a/libpng-manual.txt
+++ b/libpng-manual.txt
@@ -1,9 +1,8 @@
libpng-manual.txt - A description on how to use and modify libpng
- libpng version 1.6.34 - September 29, 2017
+ libpng version 1.6.35 - July 15, 2018
Updated and distributed by Glenn Randers-Pehrson
- <glennrp at users.sourceforge.net>
- Copyright (c) 1998-2017 Glenn Randers-Pehrson
+ Copyright (c) 1998-2018 Glenn Randers-Pehrson
This document is released under the libpng license.
For conditions of distribution and use, see the disclaimer
@@ -11,7 +10,7 @@
Based on:
- libpng versions 0.97, January 1998, through 1.6.34 - September 29, 2017
+ libpng versions 0.97, January 1998, through 1.6.35 - July 15, 2018
Updated and distributed by Glenn Randers-Pehrson
Copyright (c) 1998-2017 Glenn Randers-Pehrson
@@ -348,18 +347,18 @@
FILE *fp = fopen(file_name, "rb");
if (!fp)
{
- return (ERROR);
+ return ERROR;
}
if (fread(header, 1, number, fp) != number)
{
- return (ERROR);
+ return ERROR;
}
is_png = !png_sig_cmp(header, 0, number);
if (!is_png)
{
- return (NOT_PNG);
+ return NOT_PNG;
}
Next, png_struct and png_info need to be allocated and initialized. In
@@ -378,7 +377,7 @@
user_error_fn, user_warning_fn);
if (!png_ptr)
- return (ERROR);
+ return ERROR;
png_infop info_ptr = png_create_info_struct(png_ptr);
@@ -386,7 +385,7 @@
{
png_destroy_read_struct(&png_ptr,
(png_infopp)NULL, (png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
If you want to use your own memory allocation routines,
@@ -421,7 +420,7 @@
png_destroy_read_struct(&png_ptr, &info_ptr,
&end_info);
fclose(fp);
- return (ERROR);
+ return ERROR;
}
Pass (png_infopp)NULL instead of &end_info if you didn't create
@@ -503,7 +502,7 @@
png_byte name[5];
png_byte *data;
- png_size_t size;
+ size_t size;
/* Note that libpng has already taken care of
the CRC handling */
@@ -512,9 +511,9 @@
unknown chunk structure, process it, and return one
of the following: */
- return (-n); /* chunk had an error */
- return (0); /* did not recognize */
- return (n); /* success */
+ return -n; /* chunk had an error */
+ return 0; /* did not recognize */
+ return n; /* success */
}
(You can give your function another name that you like instead of
@@ -1003,7 +1002,7 @@
png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
In this case the output is assumed to be something like an sRGB conformant
-display preceeded by a power-law lookup table of power 1.45. This is how
+display preceded by a power-law lookup table of power 1.45. This is how
early Mac systems behaved.
png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR);
@@ -1055,7 +1054,7 @@
When the default gamma of PNG files doesn't match the output gamma.
If you have PNG files with no gamma information png_set_alpha_mode allows
-you to provide a default gamma, but it also sets the ouput gamma to the
+you to provide a default gamma, but it also sets the output gamma to the
matching value. If you know your PNG files have a gamma that doesn't
match the output you can take advantage of the fact that
png_set_alpha_mode always sets the output gamma but only sets the PNG
@@ -2409,7 +2408,7 @@
{
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
png_read_end(png_ptr, end_info);
@@ -2549,7 +2548,7 @@
user_error_fn, user_warning_fn);
if (!png_ptr)
- return (ERROR);
+ return ERROR;
info_ptr = png_create_info_struct(png_ptr);
@@ -2557,14 +2556,14 @@
{
png_destroy_read_struct(&png_ptr,
(png_infopp)NULL, (png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
if (setjmp(png_jmpbuf(png_ptr)))
{
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
/* This one's new. You can provide functions
@@ -2598,7 +2597,7 @@
{
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
/* This one's new also. Simply give it a chunk
@@ -2742,7 +2741,7 @@
FILE *fp = fopen(file_name, "wb");
if (!fp)
- return (ERROR);
+ return ERROR;
Next, png_struct and png_info need to be allocated and initialized.
As these can be both relatively large, you may not want to store these
@@ -2757,14 +2756,14 @@
user_error_fn, user_warning_fn);
if (!png_ptr)
- return (ERROR);
+ return ERROR;
png_infop info_ptr = png_create_info_struct(png_ptr);
if (!info_ptr)
{
png_destroy_write_struct(&png_ptr,
(png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
If you want to use your own memory allocation routines,
@@ -2791,7 +2790,7 @@
{
png_destroy_write_struct(&png_ptr, &info_ptr);
fclose(fp);
- return (ERROR);
+ return ERROR;
}
...
return;
@@ -3779,7 +3778,7 @@
formats do not accommodate your needs then you can, and should, use the more
sophisticated APIs above - these support a wide variety of in-memory formats
and a wide variety of sophisticated transformations to those formats as well
-as a wide variety of APIs to manipulate ancilliary information.
+as a wide variety of APIs to manipulate ancillary information.
To read a PNG file using the simplified API:
@@ -4102,7 +4101,7 @@
The PNG header is read from the stdio FILE object.
int png_image_begin_read_from_memory(png_imagep image,
- png_const_voidp memory, png_size_t size)
+ png_const_voidp memory, size_t size)
The PNG header is read from the given memory buffer.
@@ -4255,10 +4254,10 @@
The replacement I/O functions must have prototypes as follows:
void user_read_data(png_structp png_ptr,
- png_bytep data, png_size_t length);
+ png_bytep data, size_t length);
void user_write_data(png_structp png_ptr,
- png_bytep data, png_size_t length);
+ png_bytep data, size_t length);
void user_flush_data(png_structp png_ptr);
@@ -4784,7 +4783,7 @@
the process.
We changed the prototypes of png_get_compression_buffer_size() and
-png_set_compression_buffer_size() to work with png_size_t instead of
+png_set_compression_buffer_size() to work with size_t instead of
png_uint_32.
Support for numbered error messages was removed by default, since we
@@ -5255,9 +5254,8 @@
https://github.com/glennrp/libpng or
https://sourceforge.net/p/libpng/code/ci/libpng16/tree/
-Patches can be sent to glennrp at users.sourceforge.net or to
-png-mng-implement at lists.sourceforge.net or you can upload them to
-the libpng bug tracker at
+Patches can be sent to png-mng-implement at lists.sourceforge.net or
+you can upload them to the libpng bug tracker at
https://libpng.sourceforge.io/
@@ -5266,9 +5264,9 @@
https://github.com/glennrp/libpng/pulls
We also accept patches built from the tar or zip distributions, and
-simple verbal discriptions of bug fixes, reported either to the
+simple verbal descriptions of bug fixes, reported either to the
SourceForge bug tracker, to the png-mng-implement at lists.sf.net
-mailing list, as github issues, or directly to glennrp.
+mailing list, as github issues.
XV. Coding style
@@ -5289,7 +5287,7 @@
The braces can be omitted from simple one-line actions:
if (condition)
- return (0);
+ return 0;
We use 3-space indentation, except for continued statements which
are usually indented the same as the first line of the statement
@@ -5414,7 +5412,7 @@
an official declaration.
This is your unofficial assurance that libpng from version 0.71 and
-upward through 1.6.34 are Y2K compliant. It is my belief that earlier
+upward through 1.6.35 are Y2K compliant. It is my belief that earlier
versions were also Y2K compliant.
Libpng only has two year fields. One is a 2-byte unsigned integer
diff --git a/libpng.3 b/libpng.3
index 3c8d62a..01cd905 100644
--- a/libpng.3
+++ b/libpng.3
@@ -1,6 +1,6 @@
-.TH LIBPNG 3 "September 29, 2017"
+.TH LIBPNG 3 "July 15, 2018"
.SH NAME
-libpng \- Portable Network Graphics (PNG) Reference Library 1.6.34
+libpng \- Portable Network Graphics (PNG) Reference Library 1.6.35
.SH SYNOPSIS
\fB
#include <png.h>\fP
@@ -225,7 +225,7 @@
\fBint png_image_begin_read_from_stdio (png_imagep \fP\fIimage\fP\fB, FILE* \fIfile\fP\fB);\fP
-\fBint, png_image_begin_read_from_memory (png_imagep \fP\fIimage\fP\fB, png_const_voidp \fP\fImemory\fP\fB, png_size_t \fIsize\fP\fB);\fP
+\fBint, png_image_begin_read_from_memory (png_imagep \fP\fIimage\fP\fB, png_const_voidp \fP\fImemory\fP\fB, size_t \fIsize\fP\fB);\fP
\fBint png_image_finish_read (png_imagep \fP\fIimage\fP\fB, png_colorp \fP\fIbackground\fP\fB, void \fP\fI*buffer\fP\fB, png_int_32 \fP\fIrow_stride\fP\fB, void \fI*colormap\fP\fB);\fP
@@ -237,7 +237,7 @@
\fBint png_image_write_to_stdio (png_imagep \fP\fIimage\fP\fB, FILE \fP\fI*file\fP\fB, int \fP\fIconvert_to_8_bit\fP\fB, const void \fP\fI*buffer\fP\fB, png_int_32 \fP\fIrow_stride\fP\fB, void \fI*colormap)\fP\fB);\fP
-\fBvoid png_info_init_3 (png_infopp \fP\fIinfo_ptr\fP\fB, png_size_t \fIpng_info_struct_size\fP\fB);\fP
+\fBvoid png_info_init_3 (png_infopp \fP\fIinfo_ptr\fP\fB, size_t \fIpng_info_struct_size\fP\fB);\fP
\fBvoid png_init_io (png_structp \fP\fIpng_ptr\fP\fB, FILE \fI*fp\fP\fB);\fP
@@ -251,9 +251,9 @@
\fBpng_uint_32 png_permit_mng_features (png_structp \fP\fIpng_ptr\fP\fB, png_uint_32 \fImng_features_permitted\fP\fB);\fP
-\fBvoid png_process_data (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_bytep \fP\fIbuffer\fP\fB, png_size_t \fIbuffer_size\fP\fB);\fP
+\fBvoid png_process_data (png_structp \fP\fIpng_ptr\fP\fB, png_infop \fP\fIinfo_ptr\fP\fB, png_bytep \fP\fIbuffer\fP\fB, size_t \fIbuffer_size\fP\fB);\fP
-\fBpng_size_t png_process_data_pause \fP\fI(png_structp\fP\fB, int \fIsave\fP\fB);\fP
+\fBsize_t png_process_data_pause \fP\fI(png_structp\fP\fB, int \fIsave\fP\fB);\fP
\fBpng_uint_32 png_process_data_skip \fI(png_structp\fP\fB);\fP
@@ -475,15 +475,15 @@
\fBvoid png_set_write_user_transform_fn (png_structp \fP\fIpng_ptr\fP\fB, png_user_transform_ptr \fIwrite_user_transform_fn\fP\fB);\fP
-\fBint png_sig_cmp (png_bytep \fP\fIsig\fP\fB, png_size_t \fP\fIstart\fP\fB, png_size_t \fInum_to_check\fP\fB);\fP
+\fBint png_sig_cmp (png_bytep \fP\fIsig\fP\fB, size_t \fP\fIstart\fP\fB, size_t \fInum_to_check\fP\fB);\fP
\fBvoid png_start_read_image (png_structp \fIpng_ptr\fP\fB);\fP
\fBvoid png_warning (png_structp \fP\fIpng_ptr\fP\fB, png_const_charp \fImessage\fP\fB);\fP
-\fBvoid png_write_chunk (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIchunk_name\fP\fB, png_bytep \fP\fIdata\fP\fB, png_size_t \fIlength\fP\fB);\fP
+\fBvoid png_write_chunk (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIchunk_name\fP\fB, png_bytep \fP\fIdata\fP\fB, size_t \fIlength\fP\fB);\fP
-\fBvoid png_write_chunk_data (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIdata\fP\fB, png_size_t \fIlength\fP\fB);\fP
+\fBvoid png_write_chunk_data (png_structp \fP\fIpng_ptr\fP\fB, png_bytep \fP\fIdata\fP\fB, size_t \fIlength\fP\fB);\fP
\fBvoid png_write_chunk_end (png_structp \fIpng_ptr\fP\fB);\fP
@@ -518,10 +518,9 @@
.SH LIBPNG.TXT
libpng-manual.txt - A description on how to use and modify libpng
- libpng version 1.6.34 - September 29, 2017
+ libpng version 1.6.35 - July 15, 2018
Updated and distributed by Glenn Randers-Pehrson
- <glennrp at users.sourceforge.net>
- Copyright (c) 1998-2017 Glenn Randers-Pehrson
+ Copyright (c) 1998-2018 Glenn Randers-Pehrson
This document is released under the libpng license.
For conditions of distribution and use, see the disclaimer
@@ -529,7 +528,7 @@
Based on:
- libpng versions 0.97, January 1998, through 1.6.34 - September 29, 2017
+ libpng versions 0.97, January 1998, through 1.6.35 - July 15, 2018
Updated and distributed by Glenn Randers-Pehrson
Copyright (c) 1998-2017 Glenn Randers-Pehrson
@@ -866,18 +865,18 @@
FILE *fp = fopen(file_name, "rb");
if (!fp)
{
- return (ERROR);
+ return ERROR;
}
if (fread(header, 1, number, fp) != number)
{
- return (ERROR);
+ return ERROR;
}
is_png = !png_sig_cmp(header, 0, number);
if (!is_png)
{
- return (NOT_PNG);
+ return NOT_PNG;
}
Next, png_struct and png_info need to be allocated and initialized. In
@@ -896,7 +895,7 @@
user_error_fn, user_warning_fn);
if (!png_ptr)
- return (ERROR);
+ return ERROR;
png_infop info_ptr = png_create_info_struct(png_ptr);
@@ -904,7 +903,7 @@
{
png_destroy_read_struct(&png_ptr,
(png_infopp)NULL, (png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
If you want to use your own memory allocation routines,
@@ -939,7 +938,7 @@
png_destroy_read_struct(&png_ptr, &info_ptr,
&end_info);
fclose(fp);
- return (ERROR);
+ return ERROR;
}
Pass (png_infopp)NULL instead of &end_info if you didn't create
@@ -1021,7 +1020,7 @@
png_byte name[5];
png_byte *data;
- png_size_t size;
+ size_t size;
/* Note that libpng has already taken care of
the CRC handling */
@@ -1030,9 +1029,9 @@
unknown chunk structure, process it, and return one
of the following: */
- return (\-n); /* chunk had an error */
- return (0); /* did not recognize */
- return (n); /* success */
+ return \-n; /* chunk had an error */
+ return 0; /* did not recognize */
+ return n; /* success */
}
(You can give your function another name that you like instead of
@@ -1521,7 +1520,7 @@
png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
In this case the output is assumed to be something like an sRGB conformant
-display preceeded by a power-law lookup table of power 1.45. This is how
+display preceded by a power-law lookup table of power 1.45. This is how
early Mac systems behaved.
png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR);
@@ -1573,7 +1572,7 @@
When the default gamma of PNG files doesn't match the output gamma.
If you have PNG files with no gamma information png_set_alpha_mode allows
-you to provide a default gamma, but it also sets the ouput gamma to the
+you to provide a default gamma, but it also sets the output gamma to the
matching value. If you know your PNG files have a gamma that doesn't
match the output you can take advantage of the fact that
png_set_alpha_mode always sets the output gamma but only sets the PNG
@@ -2927,7 +2926,7 @@
{
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
png_read_end(png_ptr, end_info);
@@ -3067,7 +3066,7 @@
user_error_fn, user_warning_fn);
if (!png_ptr)
- return (ERROR);
+ return ERROR;
info_ptr = png_create_info_struct(png_ptr);
@@ -3075,14 +3074,14 @@
{
png_destroy_read_struct(&png_ptr,
(png_infopp)NULL, (png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
if (setjmp(png_jmpbuf(png_ptr)))
{
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
/* This one's new. You can provide functions
@@ -3116,7 +3115,7 @@
{
png_destroy_read_struct(&png_ptr, &info_ptr,
(png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
/* This one's new also. Simply give it a chunk
@@ -3260,7 +3259,7 @@
FILE *fp = fopen(file_name, "wb");
if (!fp)
- return (ERROR);
+ return ERROR;
Next, png_struct and png_info need to be allocated and initialized.
As these can be both relatively large, you may not want to store these
@@ -3275,14 +3274,14 @@
user_error_fn, user_warning_fn);
if (!png_ptr)
- return (ERROR);
+ return ERROR;
png_infop info_ptr = png_create_info_struct(png_ptr);
if (!info_ptr)
{
png_destroy_write_struct(&png_ptr,
(png_infopp)NULL);
- return (ERROR);
+ return ERROR;
}
If you want to use your own memory allocation routines,
@@ -3309,7 +3308,7 @@
{
png_destroy_write_struct(&png_ptr, &info_ptr);
fclose(fp);
- return (ERROR);
+ return ERROR;
}
...
return;
@@ -4297,7 +4296,7 @@
formats do not accommodate your needs then you can, and should, use the more
sophisticated APIs above - these support a wide variety of in-memory formats
and a wide variety of sophisticated transformations to those formats as well
-as a wide variety of APIs to manipulate ancilliary information.
+as a wide variety of APIs to manipulate ancillary information.
To read a PNG file using the simplified API:
@@ -4620,7 +4619,7 @@
The PNG header is read from the stdio FILE object.
int png_image_begin_read_from_memory(png_imagep image,
- png_const_voidp memory, png_size_t size)
+ png_const_voidp memory, size_t size)
The PNG header is read from the given memory buffer.
@@ -4773,10 +4772,10 @@
The replacement I/O functions must have prototypes as follows:
void user_read_data(png_structp png_ptr,
- png_bytep data, png_size_t length);
+ png_bytep data, size_t length);
void user_write_data(png_structp png_ptr,
- png_bytep data, png_size_t length);
+ png_bytep data, size_t length);
void user_flush_data(png_structp png_ptr);
@@ -5302,7 +5301,7 @@
the process.
We changed the prototypes of png_get_compression_buffer_size() and
-png_set_compression_buffer_size() to work with png_size_t instead of
+png_set_compression_buffer_size() to work with size_t instead of
png_uint_32.
Support for numbered error messages was removed by default, since we
@@ -5773,9 +5772,8 @@
https://github.com/glennrp/libpng or
https://sourceforge.net/p/libpng/code/ci/libpng16/tree/
-Patches can be sent to glennrp at users.sourceforge.net or to
-png-mng-implement at lists.sourceforge.net or you can upload them to
-the libpng bug tracker at
+Patches can be sent to png-mng-implement at lists.sourceforge.net or
+uploaded to the libpng bug tracker at
https://libpng.sourceforge.io/
@@ -5784,9 +5782,9 @@
https://github.com/glennrp/libpng/pulls
We also accept patches built from the tar or zip distributions, and
-simple verbal discriptions of bug fixes, reported either to the
+simple verbal descriptions of bug fixes, reported either to the
SourceForge bug tracker, to the png-mng-implement at lists.sf.net
-mailing list, as github issues, or directly to glennrp.
+mailing list, as github issues.
.SH XV. Coding style
@@ -5807,7 +5805,7 @@
The braces can be omitted from simple one-line actions:
if (condition)
- return (0);
+ return 0;
We use 3-space indentation, except for continued statements which
are usually indented the same as the first line of the statement
@@ -5932,7 +5930,7 @@
an official declaration.
This is your unofficial assurance that libpng from version 0.71 and
-upward through 1.6.34 are Y2K compliant. It is my belief that earlier
+upward through 1.6.35 are Y2K compliant. It is my belief that earlier
versions were also Y2K compliant.
Libpng only has two year fields. One is a 2-byte unsigned integer
@@ -6034,7 +6032,7 @@
...
1.5.30 15 10530 15.so.15.30[.0]
...
- 1.6.34 16 10634 16.so.16.34[.0]
+ 1.6.35 16 10635 16.so.16.35[.0]
Henceforth the source version will match the shared-library minor
and patch numbers; the shared-library major version number will be
@@ -6090,9 +6088,9 @@
Thanks to Frank J. T. Wojcik for helping with the documentation.
-Libpng version 1.6.34 - September 29, 2017:
+Libpng version 1.6.35 - July 15, 2018:
Initially created in 1995 by Guy Eric Schalnat, then of Group 42, Inc.
-Currently maintained by Glenn Randers-Pehrson (glennrp at users.sourceforge.net).
+Maintained by Glenn Randers-Pehrson.
Supported by the PNG development group
.br
@@ -6115,8 +6113,8 @@
This code is released under the libpng license.
-libpng versions 1.0.7, July 1, 2000 through 1.6.34, September 29, 2017 are
-Copyright (c) 2000-2002, 2004, 2006-2017 Glenn Randers-Pehrson, are
+libpng versions 1.0.7, July 1, 2000 through 1.6.35, July 15, 2018 are
+Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson, are
derived from libpng-1.0.6, and are distributed according to the same
disclaimer and license as libpng-1.0.6 with the following individuals
added to the list of Contributing Authors:
@@ -6242,8 +6240,6 @@
files "pngbar.png" and "pngbar.jpg (88x31) and "pngnow.png" (98x31).
Glenn Randers-Pehrson
-glennrp at users.sourceforge.net
-September 29, 2017
+July 15, 2018
.\" end of man page
-
diff --git a/libpngpf.3 b/libpngpf.3
index 8cea87a..ed371a4 100644
--- a/libpngpf.3
+++ b/libpngpf.3
@@ -1,11 +1,15 @@
-.TH LIBPNGPF 3 "April 1, 2017"
+.TH LIBPNGPF 3 "July 15, 2018"
.SH NAME
-libpng \- Portable Network Graphics (PNG) Reference Library 1.6.34
+libpng \- Portable Network Graphics (PNG) Reference Library 1.6.35
(private functions)
.SH SYNOPSIS
-\fB\fB#include \fI\fI"pngpriv.h"
+\fB#include \fI"pngpriv.h"
-\fB\fBAs of libpng version \fP\fI\fP\fI1.5.1\fP\fB\fP\fB, this section is no longer \fP\fI\fP\fImaintained\fP\fB\fP\fB, now that the private function prototypes are hidden in pngpriv.h and not accessible to applications. Look in pngpriv.h for the prototypes and a short description of each \fI\fIfunction.
+\fBAs of libpng version \fP\fI1.5.1\fP\fB, this section is no longer
+\fP\fImaintained\fP\fB, now that the private function prototypes are hidden in
+\fP\fIpngpriv.h\fP\fB and not accessible to applications. Look in
+\fP\fIpngpriv.h\fP\fB for the prototypes and a short description of each
+function.
.SH DESCRIPTION
The functions previously listed here are used privately by libpng and are not
diff --git a/ltmain.sh b/ltmain.sh
new file mode 100755
index 0000000..0f0a2da
--- /dev/null
+++ b/ltmain.sh
@@ -0,0 +1,11147 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+## by inline-source v2014-01-03.01
+
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.6
+package_revision=2.4.6
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
+fi
+
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test set = \"\${$_G_var+set}\"; then
+ save_$_G_var=\$$_G_var
+ $_G_var=C
+ export $_G_var
+ _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
+ fi"
+done
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp $nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+ _G_progs_list=$1
+ _G_check_func=$2
+ _G_PATH=${3-"$PATH"}
+
+ _G_path_prog_max=0
+ _G_path_prog_found=false
+ _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+ for _G_dir in $_G_PATH; do
+ IFS=$_G_save_IFS
+ test -z "$_G_dir" && _G_dir=.
+ for _G_prog_name in $_G_progs_list; do
+ for _exeext in '' .EXE; do
+ _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+ func_executable_p "$_G_path_prog" || continue
+ case `"$_G_path_prog" --version 2>&1` in
+ *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+ *) $_G_check_func $_G_path_prog
+ func_path_progs_result=$func_check_prog_result
+ ;;
+ esac
+ $_G_path_prog_found && break 3
+ done
+ done
+ done
+ IFS=$_G_save_IFS
+ test -z "$func_path_progs_result" && {
+ echo "no acceptable sed could be found in \$PATH" >&2
+ exit 1
+ }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+ _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for _G_i in 1 2 3 4 5 6 7; do
+ _G_sed_script=$_G_sed_script$nl$_G_sed_script
+ done
+ echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+ _G_sed_script=
+
+ func_check_prog_sed ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo '' >> conftest.nl
+ "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+ rm -f conftest.sed
+ SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+ func_check_prog_grep ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ _G_path_prog_max=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo 'GREP' >> conftest.nl
+ "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+ GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables. These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same. If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion. Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+ s/$_G_bs4/&\\
+/g
+ s/^$_G_bs2$_G_dollar/$_G_bs&/
+ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+ s/\n//g"
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+# exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+ progdir=`cd "$progdir" && pwd`
+ progpath=$progdir/$progname
+ ;;
+ *)
+ _G_IFS=$IFS
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS=$_G_IFS
+ test -x "$progdir/$progname" && break
+ done
+ IFS=$_G_IFS
+ test -n "$progdir" || progdir=`pwd`
+ progpath=$progdir/$progname
+ ;;
+esac
+
+
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
+
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
+
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
+
+# Categories 'all' and 'none' are always available. Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
+
+# By default, display warnings according to 'opt_warning_types'. Set
+# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
+
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
+
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+ $debug_cmd
+
+ test -t 1 && {
+ # COLORTERM and USE_ANSI_COLORS environment variables take
+ # precedence, because most terminfo databases neglect to describe
+ # whether color sequences are supported.
+ test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+ if test 1 = "$USE_ANSI_COLORS"; then
+ # Standard ANSI escape sequences
+ tc_reset='[0m'
+ tc_bold='[1m'; tc_standout='[7m'
+ tc_red='[31m'; tc_green='[32m'
+ tc_blue='[34m'; tc_cyan='[36m'
+ else
+ # Otherwise trust the terminfo database after all.
+ test -n "`tput sgr0 2>/dev/null`" && {
+ tc_reset=`tput sgr0`
+ test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+ tc_standout=$tc_bold
+ test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+ test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+ test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+ test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+ test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+ }
+ fi
+ }
+
+ require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+ # We should try to minimise forks, especially on Windows where they are
+ # unreasonably slow, so skip the feature probes when bash or zsh are
+ # being used:
+ if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+ : ${_G_HAVE_ARITH_OP="yes"}
+ : ${_G_HAVE_XSI_OPS="yes"}
+ # The += operator was introduced in bash 3.1
+ case $BASH_VERSION in
+ [12].* | 3.0 | 3.0*) ;;
+ *)
+ : ${_G_HAVE_PLUSEQ_OP="yes"}
+ ;;
+ esac
+ fi
+
+ # _G_HAVE_PLUSEQ_OP
+ # Can be empty, in which case the shell is probed, "yes" if += is
+ # useable or anything else if it does not work.
+ test -z "$_G_HAVE_PLUSEQ_OP" \
+ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+ && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_append ()
+ {
+ $debug_cmd
+
+ eval "$1+=\$2"
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_append ()
+ {
+ $debug_cmd
+
+ eval "$1=\$$1\$2"
+ }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+ eval 'func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1+=\\ \$func_quote_for_eval_result"
+ }'
+else
+ func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1=\$$1\\ \$func_quote_for_eval_result"
+ }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE. For example:
+#
+# func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+ $debug_cmd
+
+ eval _G_current_value='`$ECHO $'$1'`'
+ _G_delim=`expr "$2" : '\(.\)'`
+
+ case $_G_delim$_G_current_value$_G_delim in
+ *"$2$_G_delim"*) ;;
+ *) func_append "$@" ;;
+ esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+ test -z "$_G_HAVE_ARITH_OP" \
+ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+ && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+ eval 'func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=$(( $* ))
+ }'
+else
+ func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=`expr "$@"`
+ }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ # If this shell supports suffix pattern removal, then use it to avoid
+ # forking. Hide the definitions single quotes in case the shell chokes
+ # on unsupported syntax...
+ _b='func_basename_result=${1##*/}'
+ _d='case $1 in
+ */*) func_dirname_result=${1%/*}$2 ;;
+ * ) func_dirname_result=$3 ;;
+ esac'
+
+else
+ # ...otherwise fall back to using sed.
+ _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+ _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
+ if test "X$func_dirname_result" = "X$1"; then
+ func_dirname_result=$3
+ else
+ func_append func_dirname_result "$2"
+ fi'
+fi
+
+eval 'func_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+eval 'func_dirname ()
+{
+ $debug_cmd
+
+ '"$_d"'
+}'
+
+
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+ '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ _G_infix=$1; shift
+ _G_indent=$_G_infix
+ _G_prefix="$progname: $_G_infix: "
+ _G_message=$*
+
+ # Strip color escape sequences before counting printable length
+ for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+ do
+ test -n "$_G_tc" && {
+ _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+ _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+ }
+ done
+ _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
+
+ func_echo_infix_1_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_infix_1_IFS
+ $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+ _G_prefix=$_G_indent
+ done
+ IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ $debug_cmd
+
+ func_error "$*"
+ exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $debug_cmd
+
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+ test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=${#1}
+ }'
+else
+ func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+ }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ $debug_cmd
+
+ _G_directory_path=$1
+ _G_dir_list=
+
+ if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+ # Protect directory names starting with '-'
+ case $_G_directory_path in
+ -*) _G_directory_path=./$_G_directory_path ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$_G_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ _G_dir_list=$_G_directory_path:$_G_dir_list
+
+ # If the last portion added has no slash in it, the list is done
+ case $_G_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+ done
+ _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+ func_mkdir_p_IFS=$IFS; IFS=:
+ for _G_dir in $_G_dir_list; do
+ IFS=$func_mkdir_p_IFS
+ # mkdir can fail with a 'File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$_G_dir" 2>/dev/null || :
+ done
+ IFS=$func_mkdir_p_IFS
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$_G_directory_path" || \
+ func_fatal_error "Failed to create '$1'"
+ fi
+}
+
+
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
+{
+ $debug_cmd
+
+ _G_template=${TMPDIR-/tmp}/${1-$progname}
+
+ if test : = "$opt_dry_run"; then
+ # Return a directory name, but don't create it in dry-run mode
+ _G_tmpdir=$_G_template-$$
+ else
+
+ # If mktemp works, use that first and foremost
+ _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$_G_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+ func_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$_G_tmpdir"
+ umask $func_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$_G_tmpdir" || \
+ func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+ fi
+
+ $ECHO "$_G_tmpdir"
+}
+
+
+# func_normal_abspath PATH
+# ------------------------
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+func_normal_abspath ()
+{
+ $debug_cmd
+
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ _G_pathcar='s|^/\([^/]*\).*$|\1|'
+ _G_pathcdr='s|^/[^/]*||'
+ _G_removedotparts=':dotsl
+ s|/\./|/|g
+ t dotsl
+ s|/\.$|/|'
+ _G_collapseslashes='s|/\{1,\}|/|g'
+ _G_finalslash='s|/*$|/|'
+
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
+ "")
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
+ ;;
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
+ ;;
+ *)
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+ ;;
+ esac
+
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test / = "$func_normal_abspath_tpath"; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result"; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
+{
+ $debug_cmd
+
+ $opt_quiet || func_echo ${1+"$@"}
+
+ # A bug in bash halts the script if the last line of a function
+ # fails when set -e is in force, so we need another command to
+ # work around that:
+ :
+}
+
+
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
+{
+ $debug_cmd
+
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
+
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=$func_dirname_result
+ if test -z "$func_relative_path_tlibdir"; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test -n "$func_stripname_result"; then
+ func_append func_relative_path_result "/$func_stripname_result"
+ fi
+
+ # Normalisation. If bindir is libdir, return '.' else relative path.
+ if test -n "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ fi
+
+ test -n "$func_relative_path_result" || func_relative_path_result=.
+
+ :
+}
+
+
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+# i) func_quote_for_eval_result
+# double-quoted, suitable for a subsequent eval
+# ii) func_quote_for_eval_unquoted_result
+# has all characters that are still active within double
+# quotes backslashified.
+func_quote_for_eval ()
+{
+ $debug_cmd
+
+ func_quote_for_eval_unquoted_result=
+ func_quote_for_eval_result=
+ while test 0 -lt $#; do
+ case $1 in
+ *[\\\`\"\$]*)
+ _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+ *)
+ _G_unquoted_arg=$1 ;;
+ esac
+ if test -n "$func_quote_for_eval_unquoted_result"; then
+ func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+ else
+ func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+ fi
+
+ case $_G_unquoted_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and variable expansion
+ # for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_quoted_arg=\"$_G_unquoted_arg\"
+ ;;
+ *)
+ _G_quoted_arg=$_G_unquoted_arg
+ ;;
+ esac
+
+ if test -n "$func_quote_for_eval_result"; then
+ func_append func_quote_for_eval_result " $_G_quoted_arg"
+ else
+ func_append func_quote_for_eval_result "$_G_quoted_arg"
+ fi
+ shift
+ done
+}
+
+
+# func_quote_for_expand ARG
+# -------------------------
+# Aesthetically quote ARG to be evaled later; same as above,
+# but do not quote variable references.
+func_quote_for_expand ()
+{
+ $debug_cmd
+
+ case $1 in
+ *[\\\`\"]*)
+ _G_arg=`$ECHO "$1" | $SED \
+ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
+ *)
+ _G_arg=$1 ;;
+ esac
+
+ case $_G_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting and command substitution for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_arg=\"$_G_arg\"
+ ;;
+ esac
+
+ func_quote_for_expand_result=$_G_arg
+}
+
+
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_stripname ()
+ {
+ $debug_cmd
+
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary variable first.
+ func_stripname_result=$3
+ func_stripname_result=${func_stripname_result#"$1"}
+ func_stripname_result=${func_stripname_result%"$2"}
+ }'
+else
+ func_stripname ()
+ {
+ $debug_cmd
+
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+ esac
+ }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it.
+func_show_eval ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ func_quote_for_expand "$_G_cmd"
+ eval "func_notquiet $func_quote_for_expand_result"
+
+ $opt_dry_run || {
+ eval "$_G_cmd"
+ _G_status=$?
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
+# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
+# is given, then evaluate it. Use the saved locale for evaluation.
+func_show_eval_locale ()
+{
+ $debug_cmd
+
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ $opt_quiet || {
+ func_quote_for_expand "$_G_cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+
+ $opt_dry_run || {
+ eval "$_G_user_locale
+ $_G_cmd"
+ _G_status=$?
+ eval "$_G_safe_locale"
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
+ fi
+ }
+}
+
+
+# func_tr_sh
+# ----------
+# Turn $1 into a string suitable for a shell variable name.
+# Result is stored in $func_tr_sh_result. All characters
+# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
+# if $1 begins with a digit, a '_' is prepended as well.
+func_tr_sh ()
+{
+ $debug_cmd
+
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
+}
+
+
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
+{
+ $debug_cmd
+
+ $opt_verbose && func_echo "$*"
+
+ :
+}
+
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
+}
+
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+ $debug_cmd
+
+ # CATEGORY must be in the warning_categories list!
+ case " $warning_categories " in
+ *" $1 "*) ;;
+ *) func_internal_error "invalid warning category '$1'" ;;
+ esac
+
+ _G_category=$1
+ shift
+
+ case " $opt_warning_types " in
+ *" $_G_category "*) $warning_func ${1+"$@"} ;;
+ esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+ $debug_cmd
+
+ printf '%s\n%s\n' "$1" "$2" \
+ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false. Use it like this:
+#
+# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+ $debug_cmd
+
+ test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+# #!/bin/sh
+# . relative/path/to/funclib.sh
+# . relative/path/to/options-parser
+# scriptversion=1.0
+# func_options ${1+"$@"}
+# eval set dummy "$func_options_result"; shift
+# ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'. Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+ --debug enable verbose shell tracing
+ -W, --warnings=CATEGORY
+ report the warnings falling in CATEGORY [all]
+ -v, --verbose verbosely report processing
+ --version print version information and exit
+ -h, --help print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+ 'all' show all warnings
+ 'none' turn off all the warnings
+ 'error' warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code. A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+ $debug_cmd
+
+ func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not accept hook functions." ;;
+ esac
+
+ eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+ $debug_cmd
+
+ eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+ esac
+
+ eval _G_hook_fns=\$$1_hooks; shift
+
+ for _G_hook in $_G_hook_fns; do
+ eval $_G_hook '"$@"'
+
+ # store returned options list back into positional
+ # parameters for next 'cmd' execution.
+ eval _G_hook_result=\$${_G_hook}_result
+ eval set dummy "$_G_hook_result"; shift
+ done
+
+ func_quote_for_eval ${1+"$@"}
+ func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'. Like this:
+#
+# my_options_prep ()
+# {
+# $debug_cmd
+#
+# # Extend the existing usage message.
+# usage_message=$usage_message'
+# -s, --silent don'\''t print informational messages
+# '
+#
+# func_quote_for_eval ${1+"$@"}
+# my_options_prep_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_options_prep my_options_prep
+#
+#
+# my_silent_option ()
+# {
+# $debug_cmd
+#
+# # Note that for efficiency, we parse as many options as we can
+# # recognise in a loop before passing the remainder back to the
+# # caller on the first unrecognised argument we encounter.
+# while test $# -gt 0; do
+# opt=$1; shift
+# case $opt in
+# --silent|-s) opt_silent=: ;;
+# # Separate non-argument short options:
+# -s*) func_split_short_opt "$_G_opt"
+# set dummy "$func_split_short_opt_name" \
+# "-$func_split_short_opt_arg" ${1+"$@"}
+# shift
+# ;;
+# *) set dummy "$_G_opt" "$*"; shift; break ;;
+# esac
+# done
+#
+# func_quote_for_eval ${1+"$@"}
+# my_silent_option_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_parse_options my_silent_option
+#
+#
+# my_option_validation ()
+# {
+# $debug_cmd
+#
+# $opt_silent && $opt_verbose && func_fatal_help "\
+# '--silent' and '--verbose' options are mutually exclusive."
+#
+# func_quote_for_eval ${1+"$@"}
+# my_option_validation_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse. It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+ $debug_cmd
+
+ func_options_prep ${1+"$@"}
+ eval func_parse_options \
+ ${func_options_prep_result+"$func_options_prep_result"}
+ eval func_validate_options \
+ ${func_parse_options_result+"$func_parse_options_result"}
+
+ eval func_run_hooks func_options \
+ ${func_validate_options_result+"$func_validate_options_result"}
+
+ # save modified positional parameters for caller
+ func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters. If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+ $debug_cmd
+
+ # Option defaults:
+ opt_verbose=false
+ opt_warning_types=
+
+ func_run_hooks func_options_prep ${1+"$@"}
+
+ # save modified positional parameters for caller
+ func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+ $debug_cmd
+
+ func_parse_options_result=
+
+ # this just eases exit handling
+ while test $# -gt 0; do
+ # Defer to hook functions for initial option parsing, so they
+ # get priority in the event of reusing an option name.
+ func_run_hooks func_parse_options ${1+"$@"}
+
+ # Adjust func_parse_options positional parameters to match
+ eval set dummy "$func_run_hooks_result"; shift
+
+ # Break out of the loop if we already parsed every option.
+ test $# -gt 0 || break
+
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --debug|-x) debug_cmd='set -x'
+ func_echo "enabling shell trace mode"
+ $debug_cmd
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ set dummy --warnings none ${1+"$@"}
+ shift
+ ;;
+
+ --warnings|--warning|-W)
+ test $# = 0 && func_missing_arg $_G_opt && break
+ case " $warning_categories $1" in
+ *" $1 "*)
+ # trailing space prevents matching last $1 above
+ func_append_uniq opt_warning_types " $1"
+ ;;
+ *all)
+ opt_warning_types=$warning_categories
+ ;;
+ *none)
+ opt_warning_types=none
+ warning_func=:
+ ;;
+ *error)
+ opt_warning_types=$warning_categories
+ warning_func=func_fatal_error
+ ;;
+ *)
+ func_fatal_error \
+ "unsupported warning category: '$1'"
+ ;;
+ esac
+ shift
+ ;;
+
+ --verbose|-v) opt_verbose=: ;;
+ --version) func_version ;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+
+ # Separate optargs to long options (plugins may need this):
+ --*=*) func_split_equals "$_G_opt"
+ set dummy "$func_split_equals_lhs" \
+ "$func_split_equals_rhs" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate optargs to short options:
+ -W*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-v*|-x*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+ $debug_cmd
+
+ # Display all warnings if -W was not given.
+ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+ func_run_hooks func_validate_options ${1+"$@"}
+
+ # Bail if the options were screwed!
+ $exit_cmd $EXIT_FAILURE
+
+ # save modified positional parameters for caller
+ func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ $debug_cmd
+
+ eval \$ECHO \""Usage: $usage"\"
+ eval \$ECHO \""$fatal_help"\"
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
+func_help ()
+{
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message"
+ exit 0
+}
+
+
+# func_missing_arg ARGNAME
+# ------------------------
+# Echo program name prefixed message to standard error and set global
+# exit_cmd.
+func_missing_arg ()
+{
+ $debug_cmd
+
+ func_error "Missing argument for '$1'."
+ exit_cmd=exit
+}
+
+
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=${1%%=*}
+ func_split_equals_rhs=${1#*=}
+ test "x$func_split_equals_lhs" = "x$1" \
+ && func_split_equals_rhs=
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+ func_split_equals_rhs=
+ test "x$func_split_equals_lhs" = "x$1" \
+ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+ }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
+# Set func_split_short_opt_name and func_split_short_opt_arg shell
+# variables after splitting SHORTOPT after the 2nd character.
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+ func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+ }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
+{
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+ exit 0
+}
+
+
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
+{
+ $debug_cmd
+
+ eval \$ECHO \""Usage: $usage"\"
+ echo
+ $SED -n 's|^# ||
+ /^Written by/{
+ x;p;x
+ }
+ h
+ /^Written by/q' < "$progpath"
+ echo
+ eval \$ECHO \""$usage_message"\"
+}
+
+
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
+{
+ $debug_cmd
+
+ printf '%s\n' "$progname $scriptversion"
+ $SED -n '
+ /(C)/!b go
+ :more
+ /\./!{
+ N
+ s|\n# | |
+ b more
+ }
+ :go
+ /^# Written by /,/# warranty; / {
+ s|^# ||
+ s|^# *$||
+ s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+ p
+ }
+ /^# Written by / {
+ s|^# ||
+ p
+ }
+ /^warranty; /q' < "$progpath"
+
+ exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
+{
+ $debug_cmd
+
+ $warning_func ${1+"$@"}
+}
+
+
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+ -n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --mode=MODE use operation mode MODE
+ --no-warnings equivalent to '-Wnone'
+ --preserve-dup-deps don't remove duplicate dependency libraries
+ --quiet, --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ -v, --verbose print more informational messages than default
+ --version print version information
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
+ -h, --help, --help-all print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
+{
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+ host-triplet: $host
+ shell: $SHELL
+ compiler: $LTCC
+ compiler flags: $LTCFLAGS
+ linker: $LD (gnu? $with_gnu_ld)
+ version: $progname (GNU libtool) 2.4.6
+ automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+ autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+ exit 0
+}
+
+
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_lo2o ()
+ {
+ case $1 in
+ *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+ * ) func_lo2o_result=$1 ;;
+ esac
+ }'
+
+ # func_xform LIBOBJ-OR-SOURCE
+ # ---------------------------
+ # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+ # suffix to a '.lo' libtool-object suffix.
+ eval 'func_xform ()
+ {
+ func_xform_result=${1%.*}.lo
+ }'
+else
+ # ...otherwise fall back to using sed.
+ func_lo2o ()
+ {
+ func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+ }
+
+ func_xform ()
+ {
+ func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+ }
+fi
+
+
+# func_fatal_configuration ARG...
+# -------------------------------
+# Echo program name prefixed message to standard error, followed by
+# a configuration failure hint, and exit.
+func_fatal_configuration ()
+{
+ func__fatal_error ${1+"$@"} \
+ "See the $PACKAGE documentation for more information." \
+ "Fatal configuration error."
+}
+
+
+# func_config
+# -----------
+# Display the configuration for all the tags in this script.
+func_config ()
+{
+ re_begincf='^# ### BEGIN LIBTOOL'
+ re_endcf='^# ### END LIBTOOL'
+
+ # Default configuration.
+ $SED "1,/$re_begincf CONFIG/d;/$re_endcf CONFIG/,\$d" < "$progpath"
+
+ # Now print the configurations for the tags.
+ for tagname in $taglist; do
+ $SED -n "/$re_begincf TAG CONFIG: $tagname\$/,/$re_endcf TAG CONFIG: $tagname\$/p" < "$progpath"
+ done
+
+ exit $?
+}
+
+
+# func_features
+# -------------
+# Display the features supported by this script.
+func_features ()
+{
+ echo "host: $host"
+ if test yes = "$build_libtool_libs"; then
+ echo "enable shared libraries"
+ else
+ echo "disable shared libraries"
+ fi
+ if test yes = "$build_old_libs"; then
+ echo "enable static libraries"
+ else
+ echo "disable static libraries"
+ fi
+
+ exit $?
+}
+
+
+# func_enable_tag TAGNAME
+# -----------------------
+# Verify that TAGNAME is valid, and either flag an error and exit, or
+# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
+# variable here.
+func_enable_tag ()
+{
+ # Global variable:
+ tagname=$1
+
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf=/$re_begincf/,/$re_endcf/p
+
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
+
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
+ *)
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
+
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
+}
+
+
+# func_check_version_match
+# ------------------------
+# Ensure that we are using m4 macros, and libtool script from the same
+# release of libtool.
+func_check_version_match ()
+{
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from an older release.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
+$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
+$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
+$progname: and run autoconf again.
+_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
+$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
+$progname: but the definition of this LT_INIT comes from revision $macro_revision.
+$progname: You should recreate aclocal.m4 with macros from revision $package_revision
+$progname: of $PACKAGE $VERSION and run autoconf again.
+_LT_EOF
+ fi
+
+ exit $EXIT_MISMATCH
+ fi
+}
+
+
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
+{
+ $debug_mode
+
+ # Option defaults:
+ opt_config=false
+ opt_dlopen=
+ opt_dry_run=false
+ opt_help=false
+ opt_mode=
+ opt_preserve_dup_deps=false
+ opt_quiet=false
+
+ nonopt=
+ preserve_args=
+
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
+ esac
+
+ # Pass back the list of options.
+ func_quote_for_eval ${1+"$@"}
+ libtool_options_prep_result=$func_quote_for_eval_result
+}
+func_add_hook func_options_prep libtool_options_prep
+
+
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+ $debug_cmd
+
+ # Perform our own loop to consume as many options as possible in
+ # each iteration.
+ while test $# -gt 0; do
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+
+ --config) func_config ;;
+
+ --dlopen|-dlopen)
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=: ;;
+
+ --features) func_features ;;
+
+ --finish) set dummy --mode finish ${1+"$@"}; shift ;;
+
+ --help) opt_help=: ;;
+
+ --help-all) opt_help=': help-all' ;;
+
+ --mode) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_mode=$1
+ case $1 in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $_G_opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+ shift
+ ;;
+
+ --no-silent|--no-quiet)
+ opt_quiet=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ opt_warning=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-verbose)
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --silent|--quiet)
+ opt_quiet=:
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --tag) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_tag=$1
+ func_append preserve_args " $_G_opt $1"
+ func_enable_tag "$1"
+ shift
+ ;;
+
+ --verbose|-v) opt_quiet=false
+ opt_verbose=:
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ # An option not handled by this hook function:
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+ # save first non-option argument
+ if test 0 -lt $#; then
+ nonopt=$1
+ shift
+ fi
+
+ # preserve --debug
+ test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+ case $host in
+ # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+ # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ test yes != "$build_libtool_libs" \
+ && test yes != "$build_old_libs" \
+ && func_fatal_configuration "not configured to build any kind of library"
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+ func_error "unrecognized option '-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help=$help
+ help="Try '$progname --help --mode=$opt_mode' for more information."
+ }
+
+ # Pass back the unparsed argument list
+ func_quote_for_eval ${1+"$@"}
+ libtool_validate_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
+
+
+## ----------- ##
+## Main. ##
+## ----------- ##
+
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+ $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
+# func_lalib_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_lalib_p ()
+{
+ test -f "$1" &&
+ $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_lalib_unsafe_p file
+# True iff FILE is a libtool '.la' library or '.lo' object file.
+# This function implements the same check as func_lalib_p without
+# resorting to external programs. To this end, it redirects stdin and
+# closes it afterwards, without saving the original file descriptor.
+# As a safety measure, use it only where a negative result would be
+# fatal anyway. Works if 'file' does not exist.
+func_lalib_unsafe_p ()
+{
+ lalib_p=no
+ if test -f "$1" && test -r "$1" && exec 5<&0 <"$1"; then
+ for lalib_p_l in 1 2 3 4
+ do
+ read lalib_p_line
+ case $lalib_p_line in
+ \#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
+ esac
+ done
+ exec 0<&5 5<&-
+ fi
+ test yes = "$lalib_p"
+}
+
+# func_ltwrapper_script_p file
+# True iff FILE is a libtool wrapper script
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_script_p ()
+{
+ test -f "$1" &&
+ $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
+}
+
+# func_ltwrapper_executable_p file
+# True iff FILE is a libtool wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_executable_p ()
+{
+ func_ltwrapper_exec_suffix=
+ case $1 in
+ *.exe) ;;
+ *) func_ltwrapper_exec_suffix=.exe ;;
+ esac
+ $GREP "$magic_exe" "$1$func_ltwrapper_exec_suffix" >/dev/null 2>&1
+}
+
+# func_ltwrapper_scriptname file
+# Assumes file is an ltwrapper_executable
+# uses $file to determine the appropriate filename for a
+# temporary ltwrapper_script.
+func_ltwrapper_scriptname ()
+{
+ func_dirname_and_basename "$1" "" "."
+ func_stripname '' '.exe' "$func_basename_result"
+ func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
+}
+
+# func_ltwrapper_p file
+# True iff FILE is a libtool wrapper script or wrapper executable
+# This function is only a basic sanity check; it will hardly flush out
+# determined imposters.
+func_ltwrapper_p ()
+{
+ func_ltwrapper_script_p "$1" || func_ltwrapper_executable_p "$1"
+}
+
+
+# func_execute_cmds commands fail_cmd
+# Execute tilde-delimited COMMANDS.
+# If FAIL_CMD is given, eval that upon failure.
+# FAIL_CMD may read-access the current command in variable CMD!
+func_execute_cmds ()
+{
+ $debug_cmd
+
+ save_ifs=$IFS; IFS='~'
+ for cmd in $1; do
+ IFS=$sp$nl
+ eval cmd=\"$cmd\"
+ IFS=$save_ifs
+ func_show_eval "$cmd" "${2-:}"
+ done
+ IFS=$save_ifs
+}
+
+
+# func_source file
+# Source FILE, adding directory component if necessary.
+# Note that it is not necessary on cygwin/mingw to append a dot to
+# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
+# behavior happens only for exec(3), not for open(2)! Also, sourcing
+# 'FILE.' does not work on cygwin managed mounts.
+func_source ()
+{
+ $debug_cmd
+
+ case $1 in
+ */* | *\\*) . "$1" ;;
+ *) . "./$1" ;;
+ esac
+}
+
+
+# func_resolve_sysroot PATH
+# Replace a leading = in PATH with a sysroot. Store the result into
+# func_resolve_sysroot_result
+func_resolve_sysroot ()
+{
+ func_resolve_sysroot_result=$1
+ case $func_resolve_sysroot_result in
+ =*)
+ func_stripname '=' '' "$func_resolve_sysroot_result"
+ func_resolve_sysroot_result=$lt_sysroot$func_stripname_result
+ ;;
+ esac
+}
+
+# func_replace_sysroot PATH
+# If PATH begins with the sysroot, replace it with = and
+# store the result into func_replace_sysroot_result.
+func_replace_sysroot ()
+{
+ case $lt_sysroot:$1 in
+ ?*:"$lt_sysroot"*)
+ func_stripname "$lt_sysroot" '' "$1"
+ func_replace_sysroot_result='='$func_stripname_result
+ ;;
+ *)
+ # Including no sysroot.
+ func_replace_sysroot_result=$1
+ ;;
+ esac
+}
+
+# func_infer_tag arg
+# Infer tagged configuration to use if any are available and
+# if one wasn't chosen via the "--tag" command line option.
+# Only attempt this if the compiler in the base compile
+# command doesn't match the default compiler.
+# arg is usually of the form 'gcc ...'
+func_infer_tag ()
+{
+ $debug_cmd
+
+ if test -n "$available_tags" && test -z "$tagname"; then
+ CC_quoted=
+ for arg in $CC; do
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case $@ in
+ # Blanks in the command may have been stripped by the calling shell,
+ # but not from the CC environment variable when configure was run.
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
+ # Blanks at the start of $base_compile will cause this to fail
+ # if we don't check for them as well.
+ *)
+ for z in $available_tags; do
+ if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
+ # Evaluate the configuration.
+ eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ CC_quoted=
+ for arg in $CC; do
+ # Double-quote args containing other shell metacharacters.
+ func_append_quoted CC_quoted "$arg"
+ done
+ CC_expanded=`func_echo_all $CC`
+ CC_quoted_expanded=`func_echo_all $CC_quoted`
+ case "$@ " in
+ " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+ " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
+ # The compiler in the base compile command matches
+ # the one in the tagged configuration.
+ # Assume this is the tagged configuration we want.
+ tagname=$z
+ break
+ ;;
+ esac
+ fi
+ done
+ # If $tagname still isn't set, then no tagged configuration
+ # was found and let the user know that the "--tag" command
+ # line option must be used.
+ if test -z "$tagname"; then
+ func_echo "unable to infer tagged configuration"
+ func_fatal_error "specify a tag with '--tag'"
+# else
+# func_verbose "using $tagname tagged configuration"
+ fi
+ ;;
+ esac
+ fi
+}
+
+
+
+# func_write_libtool_object output_name pic_name nonpic_name
+# Create a libtool object file (analogous to a ".la" file),
+# but don't create it if we're doing a dry run.
+func_write_libtool_object ()
+{
+ write_libobj=$1
+ if test yes = "$build_libtool_libs"; then
+ write_lobj=\'$2\'
+ else
+ write_lobj=none
+ fi
+
+ if test yes = "$build_old_libs"; then
+ write_oldobj=\'$3\'
+ else
+ write_oldobj=none
+ fi
+
+ $opt_dry_run || {
+ cat >${write_libobj}T <<EOF
+# $write_libobj - a libtool object file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# Name of the PIC object.
+pic_object=$write_lobj
+
+# Name of the non-PIC object
+non_pic_object=$write_oldobj
+
+EOF
+ $MV "${write_libobj}T" "$write_libobj"
+ }
+}
+
+
+##################################################
+# FILE NAME AND PATH CONVERSION HELPER FUNCTIONS #
+##################################################
+
+# func_convert_core_file_wine_to_w32 ARG
+# Helper function used by file name conversion functions when $build is *nix,
+# and $host is mingw, cygwin, or some other w32 environment. Relies on a
+# correctly configured wine environment available, with the winepath program
+# in $build's $PATH.
+#
+# ARG is the $build file name to be converted to w32 format.
+# Result is available in $func_convert_core_file_wine_to_w32_result, and will
+# be empty on error (or when ARG is empty)
+func_convert_core_file_wine_to_w32 ()
+{
+ $debug_cmd
+
+ func_convert_core_file_wine_to_w32_result=$1
+ if test -n "$1"; then
+ # Unfortunately, winepath does not exit with a non-zero error code, so we
+ # are forced to check the contents of stdout. On the other hand, if the
+ # command is not found, the shell will set an exit code of 127 and print
+ # *an error message* to stdout. So we must check for both error code of
+ # zero AND non-empty stdout, which explains the odd construction:
+ func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
+ if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
+ func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
+ $SED -e "$sed_naive_backslashify"`
+ else
+ func_convert_core_file_wine_to_w32_result=
+ fi
+ fi
+}
+# end: func_convert_core_file_wine_to_w32
+
+
+# func_convert_core_path_wine_to_w32 ARG
+# Helper function used by path conversion functions when $build is *nix, and
+# $host is mingw, cygwin, or some other w32 environment. Relies on a correctly
+# configured wine environment available, with the winepath program in $build's
+# $PATH. Assumes ARG has no leading or trailing path separator characters.
+#
+# ARG is path to be converted from $build format to win32.
+# Result is available in $func_convert_core_path_wine_to_w32_result.
+# Unconvertible file (directory) names in ARG are skipped; if no directory names
+# are convertible, then the result may be empty.
+func_convert_core_path_wine_to_w32 ()
+{
+ $debug_cmd
+
+ # unfortunately, winepath doesn't convert paths, only file names
+ func_convert_core_path_wine_to_w32_result=
+ if test -n "$1"; then
+ oldIFS=$IFS
+ IFS=:
+ for func_convert_core_path_wine_to_w32_f in $1; do
+ IFS=$oldIFS
+ func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
+ if test -n "$func_convert_core_file_wine_to_w32_result"; then
+ if test -z "$func_convert_core_path_wine_to_w32_result"; then
+ func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
+ else
+ func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
+ fi
+ fi
+ done
+ IFS=$oldIFS
+ fi
+}
+# end: func_convert_core_path_wine_to_w32
+
+
+# func_cygpath ARGS...
+# Wrapper around calling the cygpath program via LT_CYGPATH. This is used when
+# when (1) $build is *nix and Cygwin is hosted via a wine environment; or (2)
+# $build is MSYS and $host is Cygwin, or (3) $build is Cygwin. In case (1) or
+# (2), returns the Cygwin file name or path in func_cygpath_result (input
+# file name or path is assumed to be in w32 format, as previously converted
+# from $build's *nix or MSYS format). In case (3), returns the w32 file name
+# or path in func_cygpath_result (input file name or path is assumed to be in
+# Cygwin format). Returns an empty string on error.
+#
+# ARGS are passed to cygpath, with the last one being the file name or path to
+# be converted.
+#
+# Specify the absolute *nix (or w32) name to cygpath in the LT_CYGPATH
+# environment variable; do not put it in $PATH.
+func_cygpath ()
+{
+ $debug_cmd
+
+ if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
+ func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
+ if test "$?" -ne 0; then
+ # on failure, ensure result is empty
+ func_cygpath_result=
+ fi
+ else
+ func_cygpath_result=
+ func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
+ fi
+}
+#end: func_cygpath
+
+
+# func_convert_core_msys_to_w32 ARG
+# Convert file name or path ARG from MSYS format to w32 format. Return
+# result in func_convert_core_msys_to_w32_result.
+func_convert_core_msys_to_w32 ()
+{
+ $debug_cmd
+
+ # awkward: cmd appends spaces to result
+ func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
+ $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
+}
+#end: func_convert_core_msys_to_w32
+
+
+# func_convert_file_check ARG1 ARG2
+# Verify that ARG1 (a file name in $build format) was converted to $host
+# format in ARG2. Otherwise, emit an error message, but continue (resetting
+# func_to_host_file_result to ARG1).
+func_convert_file_check ()
+{
+ $debug_cmd
+
+ if test -z "$2" && test -n "$1"; then
+ func_error "Could not determine host file name corresponding to"
+ func_error " '$1'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback:
+ func_to_host_file_result=$1
+ fi
+}
+# end func_convert_file_check
+
+
+# func_convert_path_check FROM_PATHSEP TO_PATHSEP FROM_PATH TO_PATH
+# Verify that FROM_PATH (a path in $build format) was converted to $host
+# format in TO_PATH. Otherwise, emit an error message, but continue, resetting
+# func_to_host_file_result to a simplistic fallback value (see below).
+func_convert_path_check ()
+{
+ $debug_cmd
+
+ if test -z "$4" && test -n "$3"; then
+ func_error "Could not determine the host path corresponding to"
+ func_error " '$3'"
+ func_error "Continuing, but uninstalled executables may not work."
+ # Fallback. This is a deliberately simplistic "conversion" and
+ # should not be "improved". See libtool.info.
+ if test "x$1" != "x$2"; then
+ lt_replace_pathsep_chars="s|$1|$2|g"
+ func_to_host_path_result=`echo "$3" |
+ $SED -e "$lt_replace_pathsep_chars"`
+ else
+ func_to_host_path_result=$3
+ fi
+ fi
+}
+# end func_convert_path_check
+
+
+# func_convert_path_front_back_pathsep FRONTPAT BACKPAT REPL ORIG
+# Modifies func_to_host_path_result by prepending REPL if ORIG matches FRONTPAT
+# and appending REPL if ORIG matches BACKPAT.
+func_convert_path_front_back_pathsep ()
+{
+ $debug_cmd
+
+ case $4 in
+ $1 ) func_to_host_path_result=$3$func_to_host_path_result
+ ;;
+ esac
+ case $4 in
+ $2 ) func_append func_to_host_path_result "$3"
+ ;;
+ esac
+}
+# end func_convert_path_front_back_pathsep
+
+
+##################################################
+# $build to $host FILE NAME CONVERSION FUNCTIONS #
+##################################################
+# invoked via '$to_host_file_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# Result will be available in $func_to_host_file_result.
+
+
+# func_to_host_file ARG
+# Converts the file name ARG from $build format to $host format. Return result
+# in func_to_host_file_result.
+func_to_host_file ()
+{
+ $debug_cmd
+
+ $to_host_file_cmd "$1"
+}
+# end func_to_host_file
+
+
+# func_to_tool_file ARG LAZY
+# converts the file name ARG from $build format to toolchain format. Return
+# result in func_to_tool_file_result. If the conversion in use is listed
+# in (the comma separated) LAZY, no conversion takes place.
+func_to_tool_file ()
+{
+ $debug_cmd
+
+ case ,$2, in
+ *,"$to_tool_file_cmd",*)
+ func_to_tool_file_result=$1
+ ;;
+ *)
+ $to_tool_file_cmd "$1"
+ func_to_tool_file_result=$func_to_host_file_result
+ ;;
+ esac
+}
+# end func_to_tool_file
+
+
+# func_convert_file_noop ARG
+# Copy ARG to func_to_host_file_result.
+func_convert_file_noop ()
+{
+ func_to_host_file_result=$1
+}
+# end func_convert_file_noop
+
+
+# func_convert_file_msys_to_w32 ARG
+# Convert file name ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_file_result.
+func_convert_file_msys_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_to_host_file_result=$func_convert_core_msys_to_w32_result
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_w32
+
+
+# func_convert_file_cygwin_to_w32 ARG
+# Convert file name ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_file_cygwin_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ # because $build is cygwin, we call "the" cygpath in $PATH; no need to use
+ # LT_CYGPATH in this case.
+ func_to_host_file_result=`cygpath -m "$1"`
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_cygwin_to_w32
+
+
+# func_convert_file_nix_to_w32 ARG
+# Convert file name ARG from *nix to w32 format. Requires a wine environment
+# and a working winepath. Returns result in func_to_host_file_result.
+func_convert_file_nix_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ func_convert_core_file_wine_to_w32 "$1"
+ func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_w32
+
+
+# func_convert_file_msys_to_cygwin ARG
+# Convert file name ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_file_msys_to_cygwin ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ func_convert_core_msys_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result=$func_cygpath_result
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_msys_to_cygwin
+
+
+# func_convert_file_nix_to_cygwin ARG
+# Convert file name ARG from *nix to Cygwin format. Requires Cygwin installed
+# in a wine environment, working winepath, and LT_CYGPATH set. Returns result
+# in func_to_host_file_result.
+func_convert_file_nix_to_cygwin ()
+{
+ $debug_cmd
+
+ func_to_host_file_result=$1
+ if test -n "$1"; then
+ # convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
+ func_convert_core_file_wine_to_w32 "$1"
+ func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result=$func_cygpath_result
+ fi
+ func_convert_file_check "$1" "$func_to_host_file_result"
+}
+# end func_convert_file_nix_to_cygwin
+
+
+#############################################
+# $build to $host PATH CONVERSION FUNCTIONS #
+#############################################
+# invoked via '$to_host_path_cmd ARG'
+#
+# In each case, ARG is the path to be converted from $build to $host format.
+# The result will be available in $func_to_host_path_result.
+#
+# Path separators are also converted from $build format to $host format. If
+# ARG begins or ends with a path separator character, it is preserved (but
+# converted to $host format) on output.
+#
+# All path conversion functions are named using the following convention:
+# file name conversion function : func_convert_file_X_to_Y ()
+# path conversion function : func_convert_path_X_to_Y ()
+# where, for any given $build/$host combination the 'X_to_Y' value is the
+# same. If conversion functions are added for new $build/$host combinations,
+# the two new functions must follow this pattern, or func_init_to_host_path_cmd
+# will break.
+
+
+# func_init_to_host_path_cmd
+# Ensures that function "pointer" variable $to_host_path_cmd is set to the
+# appropriate value, based on the value of $to_host_file_cmd.
+to_host_path_cmd=
+func_init_to_host_path_cmd ()
+{
+ $debug_cmd
+
+ if test -z "$to_host_path_cmd"; then
+ func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
+ to_host_path_cmd=func_convert_path_$func_stripname_result
+ fi
+}
+
+
+# func_to_host_path ARG
+# Converts the path ARG from $build format to $host format. Return result
+# in func_to_host_path_result.
+func_to_host_path ()
+{
+ $debug_cmd
+
+ func_init_to_host_path_cmd
+ $to_host_path_cmd "$1"
+}
+# end func_to_host_path
+
+
+# func_convert_path_noop ARG
+# Copy ARG to func_to_host_path_result.
+func_convert_path_noop ()
+{
+ func_to_host_path_result=$1
+}
+# end func_convert_path_noop
+
+
+# func_convert_path_msys_to_w32 ARG
+# Convert path ARG from (mingw) MSYS to (mingw) w32 format; automatic
+# conversion to w32 is not available inside the cwrapper. Returns result in
+# func_to_host_path_result.
+func_convert_path_msys_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from ARG. MSYS
+ # behavior is inconsistent here; cygpath turns them into '.;' and ';.';
+ # and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result=$func_convert_core_msys_to_w32_result
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_msys_to_w32
+
+
+# func_convert_path_cygwin_to_w32 ARG
+# Convert path ARG from Cygwin to w32 format. Returns result in
+# func_to_host_file_result.
+func_convert_path_cygwin_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_to_host_path_result=`cygpath -m -p "$func_to_host_path_tmp1"`
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_cygwin_to_w32
+
+
+# func_convert_path_nix_to_w32 ARG
+# Convert path ARG from *nix to w32 format. Requires a wine environment and
+# a working winepath. Returns result in func_to_host_file_result.
+func_convert_path_nix_to_w32 ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
+ func_convert_path_check : ";" \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
+ fi
+}
+# end func_convert_path_nix_to_w32
+
+
+# func_convert_path_msys_to_cygwin ARG
+# Convert path ARG from MSYS to Cygwin format. Requires LT_CYGPATH set.
+# Returns result in func_to_host_file_result.
+func_convert_path_msys_to_cygwin ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # See func_convert_path_msys_to_w32:
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result=$func_cygpath_result
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_msys_to_cygwin
+
+
+# func_convert_path_nix_to_cygwin ARG
+# Convert path ARG from *nix to Cygwin format. Requires Cygwin installed in a
+# a wine environment, working winepath, and LT_CYGPATH set. Returns result in
+# func_to_host_file_result.
+func_convert_path_nix_to_cygwin ()
+{
+ $debug_cmd
+
+ func_to_host_path_result=$1
+ if test -n "$1"; then
+ # Remove leading and trailing path separator characters from
+ # ARG. msys behavior is inconsistent here, cygpath turns them
+ # into '.;' and ';.', and winepath ignores them completely.
+ func_stripname : : "$1"
+ func_to_host_path_tmp1=$func_stripname_result
+ func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
+ func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result=$func_cygpath_result
+ func_convert_path_check : : \
+ "$func_to_host_path_tmp1" "$func_to_host_path_result"
+ func_convert_path_front_back_pathsep ":*" "*:" : "$1"
+ fi
+}
+# end func_convert_path_nix_to_cygwin
+
+
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+ $debug_cmd
+
+ func_dll_def_p_tmp=`$SED -n \
+ -e 's/^[ ]*//' \
+ -e '/^\(;.*\)*$/d' \
+ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
+ -e q \
+ "$1"`
+ test DEF = "$func_dll_def_p_tmp"
+}
+
+
+# func_mode_compile arg...
+func_mode_compile ()
+{
+ $debug_cmd
+
+ # Get the compilation command and the source file.
+ base_compile=
+ srcfile=$nonopt # always keep a non-empty value in "srcfile"
+ suppress_opt=yes
+ suppress_output=
+ arg_mode=normal
+ libobj=
+ later=
+ pie_flag=
+
+ for arg
+ do
+ case $arg_mode in
+ arg )
+ # do not "continue". Instead, add this to base_compile
+ lastarg=$arg
+ arg_mode=normal
+ ;;
+
+ target )
+ libobj=$arg
+ arg_mode=normal
+ continue
+ ;;
+
+ normal )
+ # Accept any command-line options.
+ case $arg in
+ -o)
+ test -n "$libobj" && \
+ func_fatal_error "you cannot specify '-o' more than once"
+ arg_mode=target
+ continue
+ ;;
+
+ -pie | -fpie | -fPIE)
+ func_append pie_flag " $arg"
+ continue
+ ;;
+
+ -shared | -static | -prefer-pic | -prefer-non-pic)
+ func_append later " $arg"
+ continue
+ ;;
+
+ -no-suppress)
+ suppress_opt=no
+ continue
+ ;;
+
+ -Xcompiler)
+ arg_mode=arg # the next one goes into the "base_compile" arg list
+ continue # The current "srcfile" will either be retained or
+ ;; # replaced later. I would guess that would be a bug.
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ lastarg=
+ save_ifs=$IFS; IFS=,
+ for arg in $args; do
+ IFS=$save_ifs
+ func_append_quoted lastarg "$arg"
+ done
+ IFS=$save_ifs
+ func_stripname ' ' '' "$lastarg"
+ lastarg=$func_stripname_result
+
+ # Add the arguments to base_compile.
+ func_append base_compile " $lastarg"
+ continue
+ ;;
+
+ *)
+ # Accept the current argument as the source file.
+ # The previous "srcfile" becomes the current argument.
+ #
+ lastarg=$srcfile
+ srcfile=$arg
+ ;;
+ esac # case $arg
+ ;;
+ esac # case $arg_mode
+
+ # Aesthetically quote the previous argument.
+ func_append_quoted base_compile "$lastarg"
+ done # for arg
+
+ case $arg_mode in
+ arg)
+ func_fatal_error "you must specify an argument for -Xcompile"
+ ;;
+ target)
+ func_fatal_error "you must specify a target with '-o'"
+ ;;
+ *)
+ # Get the name of the library object.
+ test -z "$libobj" && {
+ func_basename "$srcfile"
+ libobj=$func_basename_result
+ }
+ ;;
+ esac
+
+ # Recognize several different file suffixes.
+ # If the user specifies -o file.o, it is replaced with file.lo
+ case $libobj in
+ *.[cCFSifmso] | \
+ *.ada | *.adb | *.ads | *.asm | \
+ *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
+ *.[fF][09]? | *.for | *.java | *.go | *.obj | *.sx | *.cu | *.cup)
+ func_xform "$libobj"
+ libobj=$func_xform_result
+ ;;
+ esac
+
+ case $libobj in
+ *.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
+ *)
+ func_fatal_error "cannot determine name of library object from '$libobj'"
+ ;;
+ esac
+
+ func_infer_tag $base_compile
+
+ for arg in $later; do
+ case $arg in
+ -shared)
+ test yes = "$build_libtool_libs" \
+ || func_fatal_configuration "cannot build a shared library"
+ build_old_libs=no
+ continue
+ ;;
+
+ -static)
+ build_libtool_libs=no
+ build_old_libs=yes
+ continue
+ ;;
+
+ -prefer-pic)
+ pic_mode=yes
+ continue
+ ;;
+
+ -prefer-non-pic)
+ pic_mode=no
+ continue
+ ;;
+ esac
+ done
+
+ func_quote_for_eval "$libobj"
+ test "X$libobj" != "X$func_quote_for_eval_result" \
+ && $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
+ && func_warning "libobj name '$libobj' may not contain shell special characters."
+ func_dirname_and_basename "$obj" "/" ""
+ objname=$func_basename_result
+ xdir=$func_dirname_result
+ lobj=$xdir$objdir/$objname
+
+ test -z "$base_compile" && \
+ func_fatal_help "you must specify a compilation command"
+
+ # Delete any leftover library objects.
+ if test yes = "$build_old_libs"; then
+ removelist="$obj $lobj $libobj ${libobj}T"
+ else
+ removelist="$lobj $libobj ${libobj}T"
+ fi
+
+ # On Cygwin there's no "real" PIC flag so we must build both object types
+ case $host_os in
+ cygwin* | mingw* | pw32* | os2* | cegcc*)
+ pic_mode=default
+ ;;
+ esac
+ if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
+ # non-PIC code in shared libraries is not supported
+ pic_mode=default
+ fi
+
+ # Calculate the filename of the output object if compiler does
+ # not support -o with -c
+ if test no = "$compiler_c_o"; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+ lockfile=$output_obj.lock
+ else
+ output_obj=
+ need_locks=no
+ lockfile=
+ fi
+
+ # Lock this critical section if it is needed
+ # We use this script file to make the link, it avoids creating a new file
+ if test yes = "$need_locks"; then
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ elif test warn = "$need_locks"; then
+ if test -f "$lockfile"; then
+ $ECHO "\
+*** ERROR, $lockfile exists and contains:
+`cat $lockfile 2>/dev/null`
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+ func_append removelist " $output_obj"
+ $ECHO "$srcfile" > "$lockfile"
+ fi
+
+ $opt_dry_run || $RM $removelist
+ func_append removelist " $lockfile"
+ trap '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE' 1 2 15
+
+ func_to_tool_file "$srcfile" func_convert_file_msys_to_w32
+ srcfile=$func_to_tool_file_result
+ func_quote_for_eval "$srcfile"
+ qsrcfile=$func_quote_for_eval_result
+
+ # Only build a PIC object if we are building libtool libraries.
+ if test yes = "$build_libtool_libs"; then
+ # Without this assignment, base_compile gets emptied.
+ fbsd_hideous_sh_bug=$base_compile
+
+ if test no != "$pic_mode"; then
+ command="$base_compile $qsrcfile $pic_flag"
+ else
+ # Don't build PIC code
+ command="$base_compile $qsrcfile"
+ fi
+
+ func_mkdir_p "$xdir$objdir"
+
+ if test -z "$output_obj"; then
+ # Place PIC objects in $objdir
+ func_append command " -o $lobj"
+ fi
+
+ func_show_eval_locale "$command" \
+ 'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
+
+ if test warn = "$need_locks" &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed, then go on to compile the next one
+ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then
+ func_show_eval '$MV "$output_obj" "$lobj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+
+ # Allow error messages only from the first compilation.
+ if test yes = "$suppress_opt"; then
+ suppress_output=' >/dev/null 2>&1'
+ fi
+ fi
+
+ # Only build a position-dependent object if we build old libraries.
+ if test yes = "$build_old_libs"; then
+ if test yes != "$pic_mode"; then
+ # Don't build PIC code
+ command="$base_compile $qsrcfile$pie_flag"
+ else
+ command="$base_compile $qsrcfile $pic_flag"
+ fi
+ if test yes = "$compiler_c_o"; then
+ func_append command " -o $obj"
+ fi
+
+ # Suppress compiler output if we already did a PIC compilation.
+ func_append command "$suppress_output"
+ func_show_eval_locale "$command" \
+ '$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
+
+ if test warn = "$need_locks" &&
+ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
+ $ECHO "\
+*** ERROR, $lockfile contains:
+`cat $lockfile 2>/dev/null`
+
+but it should contain:
+$srcfile
+
+This indicates that another process is trying to use the same
+temporary object file, and libtool could not work around it because
+your compiler does not support '-c' and '-o' together. If you
+repeat this compilation, it may succeed, by chance, but you had better
+avoid parallel builds (make -j) in this platform, or get a better
+compiler."
+
+ $opt_dry_run || $RM $removelist
+ exit $EXIT_FAILURE
+ fi
+
+ # Just move the object if needed
+ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then
+ func_show_eval '$MV "$output_obj" "$obj"' \
+ 'error=$?; $opt_dry_run || $RM $removelist; exit $error'
+ fi
+ fi
+
+ $opt_dry_run || {
+ func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
+
+ # Unlock the critical section if it was locked
+ if test no != "$need_locks"; then
+ removelist=$lockfile
+ $RM "$lockfile"
+ fi
+ }
+
+ exit $EXIT_SUCCESS
+}
+
+$opt_help || {
+ test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
+}
+
+func_mode_help ()
+{
+ # We need to display help for each of the modes.
+ case $opt_mode in
+ "")
+ # Generic help is extracted from the usage comments
+ # at the start of this file.
+ func_help
+ ;;
+
+ clean)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=clean RM [RM-OPTION]... FILE...
+
+Remove files from the build directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, object or program, all the files associated
+with it are deleted. Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ compile)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE
+
+Compile a source file into a libtool library object.
+
+This mode accepts the following additional options:
+
+ -o OUTPUT-FILE set the output file name to OUTPUT-FILE
+ -no-suppress do not suppress compiler output for multiple passes
+ -prefer-pic try to build PIC objects only
+ -prefer-non-pic try to build non-PIC objects only
+ -shared do not build a '.o' file suitable for static linking
+ -static only build a '.o' file suitable for static linking
+ -Wc,FLAG pass FLAG directly to the compiler
+
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
+from the given SOURCEFILE.
+
+The output file name is determined by removing the directory component from
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
+ ;;
+
+ execute)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=execute COMMAND [ARGS]...
+
+Automatically set library path, then run a program.
+
+This mode accepts the following additional options:
+
+ -dlopen FILE add the directory containing FILE to the library path
+
+This mode sets the library path environment variable according to '-dlopen'
+flags.
+
+If any of the ARGS are libtool executable wrappers, then they are translated
+into their corresponding uninstalled binary, and any of their required library
+directories are added to the library path.
+
+Then, COMMAND is executed, with ARGS as arguments."
+ ;;
+
+ finish)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=finish [LIBDIR]...
+
+Complete the installation of libtool libraries.
+
+Each LIBDIR is a directory that contains libtool libraries.
+
+The commands that this mode executes may require superuser privileges. Use
+the '--dry-run' option if you just want to see what would be executed."
+ ;;
+
+ install)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=install INSTALL-COMMAND...
+
+Install executables or libraries.
+
+INSTALL-COMMAND is the installation command. The first component should be
+either the 'install' or 'cp' program.
+
+The following components of INSTALL-COMMAND are treated specially:
+
+ -inst-prefix-dir PREFIX-DIR Use PREFIX-DIR as a staging area for installation
+
+The rest of the components are interpreted as arguments to that command (only
+BSD-compatible install options are recognized)."
+ ;;
+
+ link)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=link LINK-COMMAND...
+
+Link object files or libraries together to form another library, or to
+create an executable program.
+
+LINK-COMMAND is a command using the C compiler that you would use to create
+a program from several object files.
+
+The following components of LINK-COMMAND are treated specially:
+
+ -all-static do not do any dynamic linking at all
+ -avoid-version do not add a version suffix if possible
+ -bindir BINDIR specify path to binaries directory (for systems where
+ libraries must be found in the PATH setting at runtime)
+ -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
+ -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+ -export-symbols SYMFILE
+ try to export only the symbols listed in SYMFILE
+ -export-symbols-regex REGEX
+ try to export only the symbols matching REGEX
+ -LLIBDIR search LIBDIR for required installed libraries
+ -lNAME OUTPUT-FILE requires the installed library libNAME
+ -module build a library that can dlopened
+ -no-fast-install disable the fast-install mode
+ -no-install link a not-installable executable
+ -no-undefined declare that a library does not refer to external symbols
+ -o OUTPUT-FILE create OUTPUT-FILE from the specified objects
+ -objectlist FILE use a list of object files found in FILE to specify objects
+ -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
+ -precious-files-regex REGEX
+ don't remove output files matching REGEX
+ -release RELEASE specify package release information
+ -rpath LIBDIR the created library will eventually be installed in LIBDIR
+ -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries
+ -shared only do dynamic linking of libtool libraries
+ -shrext SUFFIX override the standard shared library file extension
+ -static do not do any dynamic linking of uninstalled libtool libraries
+ -static-libtool-libs
+ do not do any dynamic linking of libtool libraries
+ -version-info CURRENT[:REVISION[:AGE]]
+ specify library version info [each variable defaults to 0]
+ -weak LIBNAME declare that the target provides the LIBNAME interface
+ -Wc,FLAG
+ -Xcompiler FLAG pass linker-specific FLAG directly to the compiler
+ -Wl,FLAG
+ -Xlinker FLAG pass linker-specific FLAG directly to the linker
+ -XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
+
+All other options (arguments beginning with '-') are ignored.
+
+Every other argument is treated as a filename. Files ending in '.la' are
+treated as uninstalled libtool libraries, other files are standard or library
+object files.
+
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
+required, except when creating a convenience library.
+
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
+
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
+is created, otherwise an executable program is created."
+ ;;
+
+ uninstall)
+ $ECHO \
+"Usage: $progname [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE...
+
+Remove libraries from an installation directory.
+
+RM is the name of the program to use to delete files associated with each FILE
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
+to RM.
+
+If FILE is a libtool library, all the files associated with it are deleted.
+Otherwise, only FILE itself is deleted using RM."
+ ;;
+
+ *)
+ func_fatal_help "invalid operation mode '$opt_mode'"
+ ;;
+ esac
+
+ echo
+ $ECHO "Try '$progname --help' for more information about other modes."
+}
+
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+ if test : = "$opt_help"; then
+ func_mode_help
+ else
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ func_mode_help
+ done
+ } | $SED -n '1p; 2,$s/^Usage:/ or: /p'
+ {
+ func_help noexit
+ for opt_mode in compile link execute install finish uninstall clean; do
+ echo
+ func_mode_help
+ done
+ } |
+ $SED '1d
+ /^When reporting/,/^Report/{
+ H
+ d
+ }
+ $x
+ /information about other modes/d
+ /more detailed .*MODE/d
+ s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+ fi
+ exit $?
+fi
+
+
+# func_mode_execute arg...
+func_mode_execute ()
+{
+ $debug_cmd
+
+ # The first argument is the command name.
+ cmd=$nonopt
+ test -z "$cmd" && \
+ func_fatal_help "you must specify a COMMAND"
+
+ # Handle -dlopen flags immediately.
+ for file in $opt_dlopen; do
+ test -f "$file" \
+ || func_fatal_help "'$file' is not a file"
+
+ dir=
+ case $file in
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "'$lib' is not a valid libtool archive"
+
+ # Read the libtool library.
+ dlname=
+ library_names=
+ func_source "$file"
+
+ # Skip this library if it cannot be dlopened.
+ if test -z "$dlname"; then
+ # Warn if it was a shared library.
+ test -n "$library_names" && \
+ func_warning "'$file' was not linked with '-export-dynamic'"
+ continue
+ fi
+
+ func_dirname "$file" "" "."
+ dir=$func_dirname_result
+
+ if test -f "$dir/$objdir/$dlname"; then
+ func_append dir "/$objdir"
+ else
+ if test ! -f "$dir/$dlname"; then
+ func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
+ fi
+ fi
+ ;;
+
+ *.lo)
+ # Just add the directory containing the .lo file.
+ func_dirname "$file" "" "."
+ dir=$func_dirname_result
+ ;;
+
+ *)
+ func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
+ continue
+ ;;
+ esac
+
+ # Get the absolute pathname.
+ absdir=`cd "$dir" && pwd`
+ test -n "$absdir" && dir=$absdir
+
+ # Now add the directory to shlibpath_var.
+ if eval "test -z \"\$$shlibpath_var\""; then
+ eval "$shlibpath_var=\"\$dir\""
+ else
+ eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\""
+ fi
+ done
+
+ # This variable tells wrapper scripts just to set shlibpath_var
+ # rather than running their programs.
+ libtool_execute_magic=$magic
+
+ # Check if any of the arguments is a wrapper script.
+ args=
+ for file
+ do
+ case $file in
+ -* | *.la | *.lo ) ;;
+ *)
+ # Do a test to see if this is really a libtool program.
+ if func_ltwrapper_script_p "$file"; then
+ func_source "$file"
+ # Transform arg to wrapped name.
+ file=$progdir/$program
+ elif func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ func_source "$func_ltwrapper_scriptname_result"
+ # Transform arg to wrapped name.
+ file=$progdir/$program
+ fi
+ ;;
+ esac
+ # Quote arguments (to preserve shell metacharacters).
+ func_append_quoted args "$file"
+ done
+
+ if $opt_dry_run; then
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ else
+ if test -n "$shlibpath_var"; then
+ # Export the shlibpath_var.
+ eval "export $shlibpath_var"
+ fi
+
+ # Restore saved environment variables
+ for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+ do
+ eval "if test \"\${save_$lt_var+set}\" = set; then
+ $lt_var=\$save_$lt_var; export $lt_var
+ else
+ $lt_unset $lt_var
+ fi"
+ done
+
+ # Now prepare to actually exec the command.
+ exec_cmd=\$cmd$args
+ fi
+}
+
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
+
+
+# func_mode_finish arg...
+func_mode_finish ()
+{
+ $debug_cmd
+
+ libs=
+ libdirs=
+ admincmds=
+
+ for opt in "$nonopt" ${1+"$@"}
+ do
+ if test -d "$opt"; then
+ func_append libdirs " $opt"
+
+ elif test -f "$opt"; then
+ if func_lalib_unsafe_p "$opt"; then
+ func_append libs " $opt"
+ else
+ func_warning "'$opt' is not a valid libtool archive"
+ fi
+
+ else
+ func_fatal_error "invalid argument '$opt'"
+ fi
+ done
+
+ if test -n "$libs"; then
+ if test -n "$lt_sysroot"; then
+ sysroot_regex=`$ECHO "$lt_sysroot" | $SED "$sed_make_literal_regex"`
+ sysroot_cmd="s/\([ ']\)$sysroot_regex/\1/g;"
+ else
+ sysroot_cmd=
+ fi
+
+ # Remove sysroot references
+ if $opt_dry_run; then
+ for lib in $libs; do
+ echo "removing references to $lt_sysroot and '=' prefixes from $lib"
+ done
+ else
+ tmpdir=`func_mktempdir`
+ for lib in $libs; do
+ $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ > $tmpdir/tmp-la
+ mv -f $tmpdir/tmp-la $lib
+ done
+ ${RM}r "$tmpdir"
+ fi
+ fi
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ for libdir in $libdirs; do
+ if test -n "$finish_cmds"; then
+ # Do each command in the finish commands.
+ func_execute_cmds "$finish_cmds" 'admincmds="$admincmds
+'"$cmd"'"'
+ fi
+ if test -n "$finish_eval"; then
+ # Do the single finish_eval.
+ eval cmds=\"$finish_eval\"
+ $opt_dry_run || eval "$cmds" || func_append admincmds "
+ $cmds"
+ fi
+ done
+ fi
+
+ # Exit here if they wanted silent mode.
+ $opt_quiet && exit $EXIT_SUCCESS
+
+ if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
+ echo "----------------------------------------------------------------------"
+ echo "Libraries have been installed in:"
+ for libdir in $libdirs; do
+ $ECHO " $libdir"
+ done
+ echo
+ echo "If you ever happen to want to link against installed libraries"
+ echo "in a given directory, LIBDIR, you must either use libtool, and"
+ echo "specify the full pathname of the library, or use the '-LLIBDIR'"
+ echo "flag during linking and do at least one of the following:"
+ if test -n "$shlibpath_var"; then
+ echo " - add LIBDIR to the '$shlibpath_var' environment variable"
+ echo " during execution"
+ fi
+ if test -n "$runpath_var"; then
+ echo " - add LIBDIR to the '$runpath_var' environment variable"
+ echo " during linking"
+ fi
+ if test -n "$hardcode_libdir_flag_spec"; then
+ libdir=LIBDIR
+ eval flag=\"$hardcode_libdir_flag_spec\"
+
+ $ECHO " - use the '$flag' linker flag"
+ fi
+ if test -n "$admincmds"; then
+ $ECHO " - have your system administrator run these commands:$admincmds"
+ fi
+ if test -f /etc/ld.so.conf; then
+ echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
+ fi
+ echo
+
+ echo "See any operating system documentation about shared libraries for"
+ case $host in
+ solaris2.[6789]|solaris2.1[0-9])
+ echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+ echo "pages."
+ ;;
+ *)
+ echo "more information, such as the ld(1) and ld.so(8) manual pages."
+ ;;
+ esac
+ echo "----------------------------------------------------------------------"
+ fi
+ exit $EXIT_SUCCESS
+}
+
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
+
+
+# func_mode_install arg...
+func_mode_install ()
+{
+ $debug_cmd
+
+ # There may be an optional sh(1) argument at the beginning of
+ # install_prog (especially on Windows NT).
+ if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
+ # Allow the use of GNU shtool's install command.
+ case $nonopt in *shtool*) :;; *) false;; esac
+ then
+ # Aesthetically quote it.
+ func_quote_for_eval "$nonopt"
+ install_prog="$func_quote_for_eval_result "
+ arg=$1
+ shift
+ else
+ install_prog=
+ arg=$nonopt
+ fi
+
+ # The real first argument should be the name of the installation program.
+ # Aesthetically quote it.
+ func_quote_for_eval "$arg"
+ func_append install_prog "$func_quote_for_eval_result"
+ install_shared_prog=$install_prog
+ case " $install_prog " in
+ *[\\\ /]cp\ *) install_cp=: ;;
+ *) install_cp=false ;;
+ esac
+
+ # We need to accept at least all the BSD install flags.
+ dest=
+ files=
+ opts=
+ prev=
+ install_type=
+ isdir=false
+ stripme=
+ no_mode=:
+ for arg
+ do
+ arg2=
+ if test -n "$dest"; then
+ func_append files " $dest"
+ dest=$arg
+ continue
+ fi
+
+ case $arg in
+ -d) isdir=: ;;
+ -f)
+ if $install_cp; then :; else
+ prev=$arg
+ fi
+ ;;
+ -g | -m | -o)
+ prev=$arg
+ ;;
+ -s)
+ stripme=" -s"
+ continue
+ ;;
+ -*)
+ ;;
+ *)
+ # If the previous option needed an argument, then skip it.
+ if test -n "$prev"; then
+ if test X-m = "X$prev" && test -n "$install_override_mode"; then
+ arg2=$install_override_mode
+ no_mode=false
+ fi
+ prev=
+ else
+ dest=$arg
+ continue
+ fi
+ ;;
+ esac
+
+ # Aesthetically quote the argument.
+ func_quote_for_eval "$arg"
+ func_append install_prog " $func_quote_for_eval_result"
+ if test -n "$arg2"; then
+ func_quote_for_eval "$arg2"
+ fi
+ func_append install_shared_prog " $func_quote_for_eval_result"
+ done
+
+ test -z "$install_prog" && \
+ func_fatal_help "you must specify an install program"
+
+ test -n "$prev" && \
+ func_fatal_help "the '$prev' option requires an argument"
+
+ if test -n "$install_override_mode" && $no_mode; then
+ if $install_cp; then :; else
+ func_quote_for_eval "$install_override_mode"
+ func_append install_shared_prog " -m $func_quote_for_eval_result"
+ fi
+ fi
+
+ if test -z "$files"; then
+ if test -z "$dest"; then
+ func_fatal_help "no file or destination specified"
+ else
+ func_fatal_help "you must specify a destination"
+ fi
+ fi
+
+ # Strip any trailing slash from the destination.
+ func_stripname '' '/' "$dest"
+ dest=$func_stripname_result
+
+ # Check to see that the destination is a directory.
+ test -d "$dest" && isdir=:
+ if $isdir; then
+ destdir=$dest
+ destname=
+ else
+ func_dirname_and_basename "$dest" "" "."
+ destdir=$func_dirname_result
+ destname=$func_basename_result
+
+ # Not a directory, so check to see that there is only one file specified.
+ set dummy $files; shift
+ test "$#" -gt 1 && \
+ func_fatal_help "'$dest' is not a directory"
+ fi
+ case $destdir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ for file in $files; do
+ case $file in
+ *.lo) ;;
+ *)
+ func_fatal_help "'$destdir' must be an absolute directory name"
+ ;;
+ esac
+ done
+ ;;
+ esac
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic=$magic
+
+ staticlibs=
+ future_libdirs=
+ current_libdirs=
+ for file in $files; do
+
+ # Do each installation.
+ case $file in
+ *.$libext)
+ # Do the static libraries later.
+ func_append staticlibs " $file"
+ ;;
+
+ *.la)
+ func_resolve_sysroot "$file"
+ file=$func_resolve_sysroot_result
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$file" \
+ || func_fatal_help "'$file' is not a valid libtool archive"
+
+ library_names=
+ old_library=
+ relink_command=
+ func_source "$file"
+
+ # Add the libdir to current_libdirs if it is the destination.
+ if test "X$destdir" = "X$libdir"; then
+ case "$current_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append current_libdirs " $libdir" ;;
+ esac
+ else
+ # Note the libdir as a future libdir.
+ case "$future_libdirs " in
+ *" $libdir "*) ;;
+ *) func_append future_libdirs " $libdir" ;;
+ esac
+ fi
+
+ func_dirname "$file" "/" ""
+ dir=$func_dirname_result
+ func_append dir "$objdir"
+
+ if test -n "$relink_command"; then
+ # Determine the prefix the user has applied to our future dir.
+ inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
+
+ # Don't allow the user to place us outside of our expected
+ # location b/c this prevents finding dependent libraries that
+ # are installed to the same prefix.
+ # At present, this check doesn't affect windows .dll's that
+ # are installed into $libdir/../bin (currently, that works fine)
+ # but it's something to keep an eye on.
+ test "$inst_prefix_dir" = "$destdir" && \
+ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
+
+ if test -n "$inst_prefix_dir"; then
+ # Stick the inst_prefix_dir data into the link command.
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+ else
+ relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
+ fi
+
+ func_warning "relinking '$file'"
+ func_show_eval "$relink_command" \
+ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
+ fi
+
+ # See the names of the shared library.
+ set dummy $library_names; shift
+ if test -n "$1"; then
+ realname=$1
+ shift
+
+ srcname=$realname
+ test -n "$relink_command" && srcname=${realname}T
+
+ # Install the shared library and build the symlinks.
+ func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
+ 'exit $?'
+ tstripme=$stripme
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $realname in
+ *.dll.a)
+ tstripme=
+ ;;
+ esac
+ ;;
+ os2*)
+ case $realname in
+ *_dll.a)
+ tstripme=
+ ;;
+ esac
+ ;;
+ esac
+ if test -n "$tstripme" && test -n "$striplib"; then
+ func_show_eval "$striplib $destdir/$realname" 'exit $?'
+ fi
+
+ if test "$#" -gt 0; then
+ # Delete the old symlinks, and create new ones.
+ # Try 'ln -sf' first, because the 'ln' binary might depend on
+ # the symlink we replace! Solaris /bin/ln does not understand -f,
+ # so we also need to try rm && ln -s.
+ for linkname
+ do
+ test "$linkname" != "$realname" \
+ && func_show_eval "(cd $destdir && { $LN_S -f $realname $linkname || { $RM $linkname && $LN_S $realname $linkname; }; })"
+ done
+ fi
+
+ # Do each command in the postinstall commands.
+ lib=$destdir/$realname
+ func_execute_cmds "$postinstall_cmds" 'exit $?'
+ fi
+
+ # Install the pseudo-library for information purposes.
+ func_basename "$file"
+ name=$func_basename_result
+ instname=$dir/${name}i
+ func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
+
+ # Maybe install the static library, too.
+ test -n "$old_library" && func_append staticlibs " $dir/$old_library"
+ ;;
+
+ *.lo)
+ # Install (i.e. copy) a libtool object.
+
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile=$destdir/$destname
+ else
+ func_basename "$file"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
+ fi
+
+ # Deduce the name of the destination old-style object file.
+ case $destfile in
+ *.lo)
+ func_lo2o "$destfile"
+ staticdest=$func_lo2o_result
+ ;;
+ *.$objext)
+ staticdest=$destfile
+ destfile=
+ ;;
+ *)
+ func_fatal_help "cannot copy a libtool object to '$destfile'"
+ ;;
+ esac
+
+ # Install the libtool object if requested.
+ test -n "$destfile" && \
+ func_show_eval "$install_prog $file $destfile" 'exit $?'
+
+ # Install the old object if enabled.
+ if test yes = "$build_old_libs"; then
+ # Deduce the name of the old-style object file.
+ func_lo2o "$file"
+ staticobj=$func_lo2o_result
+ func_show_eval "$install_prog \$staticobj \$staticdest" 'exit $?'
+ fi
+ exit $EXIT_SUCCESS
+ ;;
+
+ *)
+ # Figure out destination file name, if it wasn't already specified.
+ if test -n "$destname"; then
+ destfile=$destdir/$destname
+ else
+ func_basename "$file"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
+ fi
+
+ # If the file is missing, and there is a .exe on the end, strip it
+ # because it is most likely a libtool script we actually want to
+ # install
+ stripped_ext=
+ case $file in
+ *.exe)
+ if test ! -f "$file"; then
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ stripped_ext=.exe
+ fi
+ ;;
+ esac
+
+ # Do a test to see if this is really a libtool program.
+ case $host in
+ *cygwin* | *mingw*)
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ wrapper=$func_ltwrapper_scriptname_result
+ else
+ func_stripname '' '.exe' "$file"
+ wrapper=$func_stripname_result
+ fi
+ ;;
+ *)
+ wrapper=$file
+ ;;
+ esac
+ if func_ltwrapper_script_p "$wrapper"; then
+ notinst_deplibs=
+ relink_command=
+
+ func_source "$wrapper"
+
+ # Check the variables that should have been set.
+ test -z "$generated_by_libtool_version" && \
+ func_fatal_error "invalid libtool wrapper script '$wrapper'"
+
+ finalize=:
+ for lib in $notinst_deplibs; do
+ # Check to see that each library is installed.
+ libdir=
+ if test -f "$lib"; then
+ func_source "$lib"
+ fi
+ libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
+ if test -n "$libdir" && test ! -f "$libfile"; then
+ func_warning "'$lib' has not been installed in '$libdir'"
+ finalize=false
+ fi
+ done
+
+ relink_command=
+ func_source "$wrapper"
+
+ outputname=
+ if test no = "$fast_install" && test -n "$relink_command"; then
+ $opt_dry_run || {
+ if $finalize; then
+ tmpdir=`func_mktempdir`
+ func_basename "$file$stripped_ext"
+ file=$func_basename_result
+ outputname=$tmpdir/$file
+ # Replace the output file specification.
+ relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
+
+ $opt_quiet || {
+ func_quote_for_expand "$relink_command"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ if eval "$relink_command"; then :
+ else
+ func_error "error: relink '$file' with the above command before installing it"
+ $opt_dry_run || ${RM}r "$tmpdir"
+ continue
+ fi
+ file=$outputname
+ else
+ func_warning "cannot relink '$file'"
+ fi
+ }
+ else
+ # Install the binary that we compiled earlier.
+ file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
+ fi
+ fi
+
+ # remove .exe since cygwin /usr/bin/install will append another
+ # one anyway
+ case $install_prog,$host in
+ */usr/bin/install*,*cygwin*)
+ case $file:$destfile in
+ *.exe:*.exe)
+ # this is ok
+ ;;
+ *.exe:*)
+ destfile=$destfile.exe
+ ;;
+ *:*.exe)
+ func_stripname '' '.exe' "$destfile"
+ destfile=$func_stripname_result
+ ;;
+ esac
+ ;;
+ esac
+ func_show_eval "$install_prog\$stripme \$file \$destfile" 'exit $?'
+ $opt_dry_run || if test -n "$outputname"; then
+ ${RM}r "$tmpdir"
+ fi
+ ;;
+ esac
+ done
+
+ for file in $staticlibs; do
+ func_basename "$file"
+ name=$func_basename_result
+
+ # Set up the ranlib parameters.
+ oldlib=$destdir/$name
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+
+ func_show_eval "$install_prog \$file \$oldlib" 'exit $?'
+
+ if test -n "$stripme" && test -n "$old_striplib"; then
+ func_show_eval "$old_striplib $tool_oldlib" 'exit $?'
+ fi
+
+ # Do each command in the postinstall commands.
+ func_execute_cmds "$old_postinstall_cmds" 'exit $?'
+ done
+
+ test -n "$future_libdirs" && \
+ func_warning "remember to run '$progname --finish$future_libdirs'"
+
+ if test -n "$current_libdirs"; then
+ # Maybe just do a dry run.
+ $opt_dry_run && current_libdirs=" -n$current_libdirs"
+ exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
+ else
+ exit $EXIT_SUCCESS
+ fi
+}
+
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
+
+
+# func_generate_dlsyms outputname originator pic_p
+# Extract symbols from dlprefiles and create ${outputname}S.o with
+# a dlpreopen symbol table.
+func_generate_dlsyms ()
+{
+ $debug_cmd
+
+ my_outputname=$1
+ my_originator=$2
+ my_pic_p=${3-false}
+ my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
+ my_dlsyms=
+
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ if test -n "$NM" && test -n "$global_symbol_pipe"; then
+ my_dlsyms=${my_outputname}S.c
+ else
+ func_error "not configured to extract global symbols from dlpreopened files"
+ fi
+ fi
+
+ if test -n "$my_dlsyms"; then
+ case $my_dlsyms in
+ "") ;;
+ *.c)
+ # Discover the nlist of each of the dlfiles.
+ nlist=$output_objdir/$my_outputname.nm
+
+ func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
+
+ # Parse the name list into a source file.
+ func_verbose "creating $output_objdir/$my_dlsyms"
+
+ $opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
+
+#ifdef __cplusplus
+extern \"C\" {
+#endif
+
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data. */
+# define LT_DLSYM_CONST
+#else
+# define LT_DLSYM_CONST const
+#endif
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* External symbol declarations for the compiler. */\
+"
+
+ if test yes = "$dlself"; then
+ func_verbose "generating symbol list for '$output'"
+
+ $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
+
+ # Add our own program objects to the symbol list.
+ progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ for progfile in $progfiles; do
+ func_to_tool_file "$progfile" func_convert_file_msys_to_w32
+ func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
+ $opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
+ done
+
+ if test -n "$exclude_expsyms"; then
+ $opt_dry_run || {
+ eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ if test -n "$export_symbols_regex"; then
+ $opt_dry_run || {
+ eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ }
+ fi
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ export_symbols=$output_objdir/$outputname.exp
+ $opt_dry_run || {
+ $RM $export_symbols
+ eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ else
+ $opt_dry_run || {
+ eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
+ eval '$MV "$nlist"T "$nlist"'
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
+ eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
+ ;;
+ esac
+ }
+ fi
+ fi
+
+ for dlprefile in $dlprefiles; do
+ func_verbose "extracting global C symbols from '$dlprefile'"
+ func_basename "$dlprefile"
+ name=$func_basename_result
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ # if an import library, we need to obtain dlname
+ if func_win32_import_lib_p "$dlprefile"; then
+ func_tr_sh "$dlprefile"
+ eval "curr_lafile=\$libfile_$func_tr_sh_result"
+ dlprefile_dlbasename=
+ if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
+ # Use subshell, to avoid clobbering current variable values
+ dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
+ if test -n "$dlprefile_dlname"; then
+ func_basename "$dlprefile_dlname"
+ dlprefile_dlbasename=$func_basename_result
+ else
+ # no lafile. user explicitly requested -dlpreopen <import library>.
+ $sharedlib_from_linklib_cmd "$dlprefile"
+ dlprefile_dlbasename=$sharedlib_from_linklib_result
+ fi
+ fi
+ $opt_dry_run || {
+ if test -n "$dlprefile_dlbasename"; then
+ eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
+ else
+ func_warning "Could not compute DLL name from $name"
+ eval '$ECHO ": $name " >> "$nlist"'
+ fi
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe |
+ $SED -e '/I __imp/d' -e 's/I __nm_/D /;s/_nm__//' >> '$nlist'"
+ }
+ else # not an import lib
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ fi
+ ;;
+ *)
+ $opt_dry_run || {
+ eval '$ECHO ": $name " >> "$nlist"'
+ func_to_tool_file "$dlprefile" func_convert_file_msys_to_w32
+ eval "$NM \"$func_to_tool_file_result\" 2>/dev/null | $global_symbol_pipe >> '$nlist'"
+ }
+ ;;
+ esac
+ done
+
+ $opt_dry_run || {
+ # Make sure we have at least an empty file.
+ test -f "$nlist" || : > "$nlist"
+
+ if test -n "$exclude_expsyms"; then
+ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T
+ $MV "$nlist"T "$nlist"
+ fi
+
+ # Try sorting and uniquifying the output.
+ if $GREP -v "^: " < "$nlist" |
+ if sort -k 3 </dev/null >/dev/null 2>&1; then
+ sort -k 3
+ else
+ sort +2
+ fi |
+ uniq > "$nlist"S; then
+ :
+ else
+ $GREP -v "^: " < "$nlist" > "$nlist"S
+ fi
+
+ if test -f "$nlist"S; then
+ eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
+ else
+ echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
+ fi
+
+ func_show_eval '$RM "${nlist}I"'
+ if test -n "$global_symbol_to_import"; then
+ eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+ fi
+
+ echo >> "$output_objdir/$my_dlsyms" "\
+
+/* The mapping between symbol names and symbols. */
+typedef struct {
+ const char *name;
+ void *address;
+} lt_dlsymlist;
+extern LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+ LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+ for (; symbol->name; ++symbol)
+ {"
+ $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+ echo >> "$output_objdir/$my_dlsyms" "\
+ }
+}"
+ fi
+ echo >> "$output_objdir/$my_dlsyms" "\
+LT_DLSYM_CONST lt_dlsymlist
+lt_${my_prefix}_LTX_preloaded_symbols[] =
+{ {\"$my_originator\", (void *) 0},"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {\"@INIT@\", (void *) <_syminit},"
+ fi
+
+ case $need_lib_prefix in
+ no)
+ eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ *)
+ eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
+ ;;
+ esac
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt_${my_prefix}_LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif\
+"
+ } # !$opt_dry_run
+
+ pic_flag_for_symtable=
+ case "$compile_command " in
+ *" -static "*) ;;
+ *)
+ case $host in
+ # compiling the symbol table file with pic_flag works around
+ # a FreeBSD bug that causes programs to crash when -lm is
+ # linked before any other PIC object. But we must not use
+ # pic_flag when linking with -static. The problem exists in
+ # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1.
+ *-*-freebsd2.*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
+ pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND" ;;
+ *-*-hpux*)
+ pic_flag_for_symtable=" $pic_flag" ;;
+ *)
+ $my_pic_p && pic_flag_for_symtable=" $pic_flag"
+ ;;
+ esac
+ ;;
+ esac
+ symtab_cflags=
+ for arg in $LTCFLAGS; do
+ case $arg in
+ -pie | -fpie | -fPIE) ;;
+ *) func_append symtab_cflags " $arg" ;;
+ esac
+ done
+
+ # Now compile the dynamic symbol file.
+ func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
+
+ # Clean up the generated files.
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
+
+ # Transform the symbol file into the correct name.
+ symfileobj=$output_objdir/${my_outputname}S.$objext
+ case $host in
+ *cygwin* | *mingw* | *cegcc* )
+ if test -f "$output_objdir/$my_outputname.def"; then
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+ else
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ fi
+ ;;
+ *)
+ compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+ ;;
+ esac
+ ;;
+ *)
+ func_fatal_error "unknown suffix for '$my_dlsyms'"
+ ;;
+ esac
+ else
+ # We keep going just in case the user didn't refer to
+ # lt_preloaded_symbols. The linker will fail if global_symbol_pipe
+ # really was required.
+
+ # Nullify the symbol file.
+ compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+ finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
+ fi
+}
+
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
+# func_win32_libid arg
+# return the library type of file 'arg'
+#
+# Need a lot of goo to handle *both* DLLs and import libs
+# Has to be a shell function in order to 'eat' the argument
+# that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
+func_win32_libid ()
+{
+ $debug_cmd
+
+ win32_libid_type=unknown
+ win32_fileres=`file -L $1 2>/dev/null`
+ case $win32_fileres in
+ *ar\ archive\ import\ library*) # definitely import
+ win32_libid_type="x86 archive import"
+ ;;
+ *ar\ archive*) # could be an import, or static
+ # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
+ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
+ $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
+ case $nm_interface in
+ "MS dumpbin")
+ if func_cygming_ms_implib_p "$1" ||
+ func_cygming_gnu_implib_p "$1"
+ then
+ win32_nmres=import
+ else
+ win32_nmres=
+ fi
+ ;;
+ *)
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
+ 1,100{
+ / I /{
+ s|.*|import|
+ p
+ q
+ }
+ }'`
+ ;;
+ esac
+ case $win32_nmres in
+ import*) win32_libid_type="x86 archive import";;
+ *) win32_libid_type="x86 archive static";;
+ esac
+ fi
+ ;;
+ *DLL*)
+ win32_libid_type="x86 DLL"
+ ;;
+ *executable*) # but shell scripts are "executable" too...
+ case $win32_fileres in
+ *MS\ Windows\ PE\ Intel*)
+ win32_libid_type="x86 DLL"
+ ;;
+ esac
+ ;;
+ esac
+ $ECHO "$win32_libid_type"
+}
+
+# func_cygming_dll_for_implib ARG
+#
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib ()
+{
+ $debug_cmd
+
+ sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
+}
+
+# func_cygming_dll_for_implib_fallback_core SECTION_NAME LIBNAMEs
+#
+# The is the core of a fallback implementation of a
+# platform-specific function to extract the name of the
+# DLL associated with the specified import library LIBNAME.
+#
+# SECTION_NAME is either .idata$6 or .idata$7, depending
+# on the platform and compiler that created the implib.
+#
+# Echos the name of the DLL associated with the
+# specified import library.
+func_cygming_dll_for_implib_fallback_core ()
+{
+ $debug_cmd
+
+ match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
+ $OBJDUMP -s --section "$1" "$2" 2>/dev/null |
+ $SED '/^Contents of section '"$match_literal"':/{
+ # Place marker at beginning of archive member dllname section
+ s/.*/====MARK====/
+ p
+ d
+ }
+ # These lines can sometimes be longer than 43 characters, but
+ # are always uninteresting
+ /:[ ]*file format pe[i]\{,1\}-/d
+ /^In archive [^:]*:/d
+ # Ensure marker is printed
+ /^====MARK====/p
+ # Remove all lines with less than 43 characters
+ /^.\{43\}/!d
+ # From remaining lines, remove first 43 characters
+ s/^.\{43\}//' |
+ $SED -n '
+ # Join marker and all lines until next marker into a single line
+ /^====MARK====/ b para
+ H
+ $ b para
+ b
+ :para
+ x
+ s/\n//g
+ # Remove the marker
+ s/^====MARK====//
+ # Remove trailing dots and whitespace
+ s/[\. \t]*$//
+ # Print
+ /./p' |
+ # we now have a list, one entry per line, of the stringified
+ # contents of the appropriate section of all members of the
+ # archive that possess that section. Heuristic: eliminate
+ # all those that have a first or second character that is
+ # a '.' (that is, objdump's representation of an unprintable
+ # character.) This should work for all archives with less than
+ # 0x302f exports -- but will fail for DLLs whose name actually
+ # begins with a literal '.' or a single character followed by
+ # a '.'.
+ #
+ # Of those that remain, print the first one.
+ $SED -e '/^\./d;/^.\./d;q'
+}
+
+# func_cygming_dll_for_implib_fallback ARG
+# Platform-specific function to extract the
+# name of the DLL associated with the specified
+# import library ARG.
+#
+# This fallback implementation is for use when $DLLTOOL
+# does not support the --identify-strict option.
+# Invoked by eval'ing the libtool variable
+# $sharedlib_from_linklib_cmd
+# Result is available in the variable
+# $sharedlib_from_linklib_result
+func_cygming_dll_for_implib_fallback ()
+{
+ $debug_cmd
+
+ if func_cygming_gnu_implib_p "$1"; then
+ # binutils import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
+ elif func_cygming_ms_implib_p "$1"; then
+ # ms-generated import library
+ sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
+ else
+ # unknown
+ sharedlib_from_linklib_result=
+ fi
+}
+
+
+# func_extract_an_archive dir oldlib
+func_extract_an_archive ()
+{
+ $debug_cmd
+
+ f_ex_an_ar_dir=$1; shift
+ f_ex_an_ar_oldlib=$1
+ if test yes = "$lock_old_archive_extraction"; then
+ lockfile=$f_ex_an_ar_oldlib.lock
+ until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+ func_echo "Waiting for $lockfile to be removed"
+ sleep 2
+ done
+ fi
+ func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+ 'stat=$?; rm -f "$lockfile"; exit $stat'
+ if test yes = "$lock_old_archive_extraction"; then
+ $opt_dry_run || rm -f "$lockfile"
+ fi
+ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ func_fatal_error "object name conflicts in archive: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib"
+ fi
+}
+
+
+# func_extract_archives gentop oldlib ...
+func_extract_archives ()
+{
+ $debug_cmd
+
+ my_gentop=$1; shift
+ my_oldlibs=${1+"$@"}
+ my_oldobjs=
+ my_xlib=
+ my_xabs=
+ my_xdir=
+
+ for my_xlib in $my_oldlibs; do
+ # Extract the objects.
+ case $my_xlib in
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
+ *) my_xabs=`pwd`"/$my_xlib" ;;
+ esac
+ func_basename "$my_xlib"
+ my_xlib=$func_basename_result
+ my_xlib_u=$my_xlib
+ while :; do
+ case " $extracted_archives " in
+ *" $my_xlib_u "*)
+ func_arith $extracted_serial + 1
+ extracted_serial=$func_arith_result
+ my_xlib_u=lt$extracted_serial-$my_xlib ;;
+ *) break ;;
+ esac
+ done
+ extracted_archives="$extracted_archives $my_xlib_u"
+ my_xdir=$my_gentop/$my_xlib_u
+
+ func_mkdir_p "$my_xdir"
+
+ case $host in
+ *-darwin*)
+ func_verbose "Extracting $my_xabs"
+ # Do not bother doing anything if just a dry run
+ $opt_dry_run || {
+ darwin_orig_dir=`pwd`
+ cd $my_xdir || exit $?
+ darwin_archive=$my_xabs
+ darwin_curdir=`pwd`
+ func_basename "$darwin_archive"
+ darwin_base_archive=$func_basename_result
+ darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
+ if test -n "$darwin_arches"; then
+ darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
+ darwin_arch=
+ func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
+ for darwin_arch in $darwin_arches; do
+ func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+ $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+ cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+ func_extract_an_archive "`pwd`" "$darwin_base_archive"
+ cd "$darwin_curdir"
+ $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
+ done # $darwin_arches
+ ## Okay now we've a bunch of thin objects, gotta fatten them up :)
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
+ darwin_file=
+ darwin_files=
+ for darwin_file in $darwin_filelist; do
+ darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
+ $LIPO -create -output "$darwin_file" $darwin_files
+ done # $darwin_filelist
+ $RM -rf unfat-$$
+ cd "$darwin_orig_dir"
+ else
+ cd $darwin_orig_dir
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ fi # $darwin_arches
+ } # !$opt_dry_run
+ ;;
+ *)
+ func_extract_an_archive "$my_xdir" "$my_xabs"
+ ;;
+ esac
+ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
+ done
+
+ func_extract_archives_result=$my_oldobjs
+}
+
+
+# func_emit_wrapper [arg=no]
+#
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable. Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take. If 'yes', then the emitted script
+# will assume that the directory where it is stored is
+# the $objdir directory. This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
+{
+ func_emit_wrapper_arg1=${1-no}
+
+ $ECHO "\
+#! $SHELL
+
+# $output - temporary wrapper script for $objdir/$outputname
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# The $output program cannot be directly executed until all the libtool
+# libraries that it depends on are installed.
+#
+# This wrapper script should never be moved out of the build directory.
+# If it is, it will not operate correctly.
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='$sed_quote_subst'
+
+# Be Bourne compatible
+if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+relink_command=\"$relink_command\"
+
+# This environment variable determines our operation mode.
+if test \"\$libtool_install_magic\" = \"$magic\"; then
+ # install mode needs the following variables:
+ generated_by_libtool_version='$macro_version'
+ notinst_deplibs='$notinst_deplibs'
+else
+ # When we are sourced in execute mode, \$file and \$ECHO are already set.
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ file=\"\$0\""
+
+ qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+ $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+ ECHO=\"$qECHO\"
+ fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ that is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options that match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+ lt_script_arg0=\$0
+ shift
+ for lt_opt
+ do
+ case \"\$lt_opt\" in
+ --lt-debug) lt_option_debug=1 ;;
+ --lt-dump-script)
+ lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+ test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+ lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+ cat \"\$lt_dump_D/\$lt_dump_F\"
+ exit 0
+ ;;
+ --lt-*)
+ \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+ exit 1
+ ;;
+ esac
+ done
+
+ # Print the debug banner immediately:
+ if test -n \"\$lt_option_debug\"; then
+ echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
+ fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+ lt_dump_args_N=1;
+ for lt_arg
+ do
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+ done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
+"
+ case $host in
+ # Backslashes separate directories on plain windows
+ *-*-mingw | *-*-os2* | *-cegcc*)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+ ;;
+
+ *)
+ $ECHO "\
+ if test -n \"\$lt_option_debug\"; then
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
+ func_lt_dump_args \${1+\"\$@\"} 1>&2
+ fi
+ exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+ ;;
+ esac
+ $ECHO "\
+ \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+ exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+ case \" \$* \" in
+ *\\ --lt-*)
+ for lt_wr_arg
+ do
+ case \$lt_wr_arg in
+ --lt-*) ;;
+ *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+ esac
+ shift
+ done ;;
+ esac
+ func_exec_program_core \${1+\"\$@\"}
+}
+
+ # Parse options
+ func_parse_lt_options \"\$0\" \${1+\"\$@\"}
+
+ # Find the directory that this script lives in.
+ thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
+ test \"x\$thisdir\" = \"x\$file\" && thisdir=.
+
+ # Follow symbolic links until we get to the real thisdir.
+ file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
+ while test -n \"\$file\"; do
+ destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
+
+ # If there was a directory component, then change thisdir.
+ if test \"x\$destdir\" != \"x\$file\"; then
+ case \"\$destdir\" in
+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;;
+ *) thisdir=\"\$thisdir/\$destdir\" ;;
+ esac
+ fi
+
+ file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+ file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
+ done
+
+ # Usually 'no', except on cygwin/mingw when embedded into
+ # the cwrapper.
+ WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
+ if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
+ # special case for '.'
+ if test \"\$thisdir\" = \".\"; then
+ thisdir=\`pwd\`
+ fi
+ # remove .libs from thisdir
+ case \"\$thisdir\" in
+ *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
+ $objdir ) thisdir=. ;;
+ esac
+ fi
+
+ # Try to get the absolute directory name.
+ absdir=\`cd \"\$thisdir\" && pwd\`
+ test -n \"\$absdir\" && thisdir=\"\$absdir\"
+"
+
+ if test yes = "$fast_install"; then
+ $ECHO "\
+ program=lt-'$outputname'$exeext
+ progdir=\"\$thisdir/$objdir\"
+
+ if test ! -f \"\$progdir/\$program\" ||
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then
+
+ file=\"\$\$-\$program\"
+
+ if test ! -d \"\$progdir\"; then
+ $MKDIR \"\$progdir\"
+ else
+ $RM \"\$progdir/\$file\"
+ fi"
+
+ $ECHO "\
+
+ # relink executable if necessary
+ if test -n \"\$relink_command\"; then
+ if relink_command_output=\`eval \$relink_command 2>&1\`; then :
+ else
+ \$ECHO \"\$relink_command_output\" >&2
+ $RM \"\$progdir/\$file\"
+ exit 1
+ fi
+ fi
+
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null ||
+ { $RM \"\$progdir/\$program\";
+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; }
+ $RM \"\$progdir/\$file\"
+ fi"
+ else
+ $ECHO "\
+ program='$outputname'
+ progdir=\"\$thisdir/$objdir\"
+"
+ fi
+
+ $ECHO "\
+
+ if test -f \"\$progdir/\$program\"; then"
+
+ # fixup the dll searchpath if we need to.
+ #
+ # Fix the DLL searchpath if we need to. Do this before prepending
+ # to shlibpath, because on Windows, both are PATH and uninstalled
+ # libraries must come first.
+ if test -n "$dllsearchpath"; then
+ $ECHO "\
+ # Add the dll search path components to the executable PATH
+ PATH=$dllsearchpath:\$PATH
+"
+ fi
+
+ # Export our shlibpath_var if we have one.
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ $ECHO "\
+ # Add our own library path to $shlibpath_var
+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
+
+ # Some systems cannot cope with colon-terminated $shlibpath_var
+ # The second colon is a workaround for a bug in BeOS R4 sed
+ $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
+
+ export $shlibpath_var
+"
+ fi
+
+ $ECHO "\
+ if test \"\$libtool_execute_magic\" != \"$magic\"; then
+ # Run the actual program with our arguments.
+ func_exec_program \${1+\"\$@\"}
+ fi
+ else
+ # The program doesn't exist.
+ \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
+ \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+ exit 1
+ fi
+fi\
+"
+}
+
+
+# func_emit_cwrapperexe_src
+# emit the source code for a wrapper executable on stdout
+# Must ONLY be called from within func_mode_link because
+# it depends on a number of variable set therein.
+func_emit_cwrapperexe_src ()
+{
+ cat <<EOF
+
+/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
+ Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+
+ The $output program cannot be directly executed until all the libtool
+ libraries that it depends on are installed.
+
+ This wrapper executable should never be moved out of the build directory.
+ If it is, it will not operate correctly.
+*/
+EOF
+ cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+#include <stdio.h>
+#include <stdlib.h>
+#ifdef _MSC_VER
+# include <direct.h>
+# include <process.h>
+# include <io.h>
+#else
+# include <unistd.h>
+# include <stdint.h>
+# ifdef __CYGWIN__
+# include <io.h>
+# endif
+#endif
+#include <malloc.h>
+#include <stdarg.h>
+#include <assert.h>
+#include <string.h>
+#include <ctype.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <sys/stat.h>
+
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
+/* declarations of non-ANSI functions */
+#if defined __MINGW32__
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined __CYGWIN__
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined other_platform || defined ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined _MSC_VER
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+# define S_IXUSR _S_IEXEC
+#elif defined __MINGW32__
+# define setmode _setmode
+# define stat _stat
+# define chmod _chmod
+# define getcwd _getcwd
+# define putenv _putenv
+#elif defined __CYGWIN__
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined other platforms ... */
+#endif
+
+#if defined PATH_MAX
+# define LT_PATHMAX PATH_MAX
+#elif defined MAXPATHLEN
+# define LT_PATHMAX MAXPATHLEN
+#else
+# define LT_PATHMAX 1024
+#endif
+
+#ifndef S_IXOTH
+# define S_IXOTH 0
+#endif
+#ifndef S_IXGRP
+# define S_IXGRP 0
+#endif
+
+/* path handling portability macros */
+#ifndef DIR_SEPARATOR
+# define DIR_SEPARATOR '/'
+# define PATH_SEPARATOR ':'
+#endif
+
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+ defined __OS2__
+# define HAVE_DOS_BASED_FILE_SYSTEM
+# define FOPEN_WB "wb"
+# ifndef DIR_SEPARATOR_2
+# define DIR_SEPARATOR_2 '\\'
+# endif
+# ifndef PATH_SEPARATOR_2
+# define PATH_SEPARATOR_2 ';'
+# endif
+#endif
+
+#ifndef DIR_SEPARATOR_2
+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR)
+#else /* DIR_SEPARATOR_2 */
+# define IS_DIR_SEPARATOR(ch) \
+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2))
+#endif /* DIR_SEPARATOR_2 */
+
+#ifndef PATH_SEPARATOR_2
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR)
+#else /* PATH_SEPARATOR_2 */
+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
+#endif /* PATH_SEPARATOR_2 */
+
+#ifndef FOPEN_WB
+# define FOPEN_WB "w"
+#endif
+#ifndef _O_BINARY
+# define _O_BINARY 0
+#endif
+
+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
+#define XFREE(stale) do { \
+ if (stale) { free (stale); stale = 0; } \
+} while (0)
+
+#if defined LT_DEBUGWRAPPER
+static int lt_debug = 1;
+#else
+static int lt_debug = 0;
+#endif
+
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
+
+void *xmalloc (size_t num);
+char *xstrdup (const char *string);
+const char *base_name (const char *name);
+char *find_executable (const char *wrapper);
+char *chase_symlinks (const char *pathspec);
+int make_executable (const char *path);
+int check_executable (const char *path);
+char *strendzap (char *str, const char *pat);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
+void lt_setenv (const char *name, const char *value);
+char *lt_extend_str (const char *orig_value, const char *add, int to_end);
+void lt_update_exe_path (const char *name, const char *value);
+void lt_update_lib_path (const char *name, const char *value);
+char **prepare_spawn (char **argv);
+void lt_dump_script (FILE *f);
+EOF
+
+ cat <<EOF
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
+const char * LIB_PATH_VARNAME = "$shlibpath_var";
+EOF
+
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ func_to_host_path "$temp_rpath"
+ cat <<EOF
+const char * LIB_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * LIB_PATH_VALUE = "";
+EOF
+ fi
+
+ if test -n "$dllsearchpath"; then
+ func_to_host_path "$dllsearchpath:"
+ cat <<EOF
+const char * EXE_PATH_VARNAME = "PATH";
+const char * EXE_PATH_VALUE = "$func_to_host_path_result";
+EOF
+ else
+ cat <<"EOF"
+const char * EXE_PATH_VARNAME = "";
+const char * EXE_PATH_VALUE = "";
+EOF
+ fi
+
+ if test yes = "$fast_install"; then
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
+EOF
+ else
+ cat <<EOF
+const char * TARGET_PROGRAM_NAME = "$outputname"; /* hopefully, no .exe */
+EOF
+ fi
+
+
+ cat <<"EOF"
+
+#define LTWRAPPER_OPTION_PREFIX "--lt-"
+
+static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
+static const char *dumpscript_opt = LTWRAPPER_OPTION_PREFIX "dump-script";
+static const char *debug_opt = LTWRAPPER_OPTION_PREFIX "debug";
+
+int
+main (int argc, char *argv[])
+{
+ char **newargz;
+ int newargc;
+ char *tmp_pathspec;
+ char *actual_cwrapper_path;
+ char *actual_cwrapper_name;
+ char *target_name;
+ char *lt_argv_zero;
+ int rval = 127;
+
+ int i;
+
+ program_name = (char *) xstrdup (base_name (argv[0]));
+ newargz = XMALLOC (char *, (size_t) argc + 1);
+
+ /* very simple arg parsing; don't want to rely on getopt
+ * also, copy all non cwrapper options to newargz, except
+ * argz[0], which is handled differently
+ */
+ newargc=0;
+ for (i = 1; i < argc; i++)
+ {
+ if (STREQ (argv[i], dumpscript_opt))
+ {
+EOF
+ case $host in
+ *mingw* | *cygwin* )
+ # make stdout use "unix" line endings
+ echo " setmode(1,_O_BINARY);"
+ ;;
+ esac
+
+ cat <<"EOF"
+ lt_dump_script (stdout);
+ return 0;
+ }
+ if (STREQ (argv[i], debug_opt))
+ {
+ lt_debug = 1;
+ continue;
+ }
+ if (STREQ (argv[i], ltwrapper_option_prefix))
+ {
+ /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+ namespace, but it is not one of the ones we know about and
+ have already dealt with, above (inluding dump-script), then
+ report an error. Otherwise, targets might begin to believe
+ they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+ namespace. The first time any user complains about this, we'll
+ need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+ or a configure.ac-settable value.
+ */
+ lt_fatal (__FILE__, __LINE__,
+ "unrecognized %s option: '%s'",
+ ltwrapper_option_prefix, argv[i]);
+ }
+ /* otherwise ... */
+ newargz[++newargc] = xstrdup (argv[i]);
+ }
+ newargz[++newargc] = NULL;
+
+EOF
+ cat <<EOF
+ /* The GNU banner must be the first non-error debug message */
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
+EOF
+ cat <<"EOF"
+ lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
+
+ tmp_pathspec = find_executable (argv[0]);
+ if (tmp_pathspec == NULL)
+ lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (before symlink chase) at: %s\n",
+ tmp_pathspec);
+
+ actual_cwrapper_path = chase_symlinks (tmp_pathspec);
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) found exe (after symlink chase) at: %s\n",
+ actual_cwrapper_path);
+ XFREE (tmp_pathspec);
+
+ actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
+ strendzap (actual_cwrapper_path, actual_cwrapper_name);
+
+ /* wrapper name transforms */
+ strendzap (actual_cwrapper_name, ".exe");
+ tmp_pathspec = lt_extend_str (actual_cwrapper_name, ".exe", 1);
+ XFREE (actual_cwrapper_name);
+ actual_cwrapper_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ /* target_name transforms -- use actual target program name; might have lt- prefix */
+ target_name = xstrdup (base_name (TARGET_PROGRAM_NAME));
+ strendzap (target_name, ".exe");
+ tmp_pathspec = lt_extend_str (target_name, ".exe", 1);
+ XFREE (target_name);
+ target_name = tmp_pathspec;
+ tmp_pathspec = 0;
+
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) libtool target name: %s\n",
+ target_name);
+EOF
+
+ cat <<EOF
+ newargz[0] =
+ XMALLOC (char, (strlen (actual_cwrapper_path) +
+ strlen ("$objdir") + 1 + strlen (actual_cwrapper_name) + 1));
+ strcpy (newargz[0], actual_cwrapper_path);
+ strcat (newargz[0], "$objdir");
+ strcat (newargz[0], "/");
+EOF
+
+ cat <<"EOF"
+ /* stop here, and copy so we don't have to do this twice */
+ tmp_pathspec = xstrdup (newargz[0]);
+
+ /* do NOT want the lt- prefix here, so use actual_cwrapper_name */
+ strcat (newargz[0], actual_cwrapper_name);
+
+ /* DO want the lt- prefix here if it exists, so use target_name */
+ lt_argv_zero = lt_extend_str (tmp_pathspec, target_name, 1);
+ XFREE (tmp_pathspec);
+ tmp_pathspec = NULL;
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ {
+ char* p;
+ while ((p = strchr (newargz[0], '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ while ((p = strchr (lt_argv_zero, '\\')) != NULL)
+ {
+ *p = '/';
+ }
+ }
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+ XFREE (target_name);
+ XFREE (actual_cwrapper_path);
+ XFREE (actual_cwrapper_name);
+
+ lt_setenv ("BIN_SH", "xpg4"); /* for Tru64 */
+ lt_setenv ("DUALCASE", "1"); /* for MSK sh */
+ /* Update the DLL searchpath. EXE_PATH_VALUE ($dllsearchpath) must
+ be prepended before (that is, appear after) LIB_PATH_VALUE ($temp_rpath)
+ because on Windows, both *_VARNAMEs are PATH but uninstalled
+ libraries must come first. */
+ lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
+ lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
+
+ lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+ nonnull (lt_argv_zero));
+ for (i = 0; i < newargc; i++)
+ {
+ lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+ i, nonnull (newargz[i]));
+ }
+
+EOF
+
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+ /* execv doesn't actually work on mingw as expected on unix */
+ newargz = prepare_spawn (newargz);
+ rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ if (rval == -1)
+ {
+ /* failed to start process */
+ lt_debugprintf (__FILE__, __LINE__,
+ "(main) failed to launch target \"%s\": %s\n",
+ lt_argv_zero, nonnull (strerror (errno)));
+ return 127;
+ }
+ return rval;
+EOF
+ ;;
+ *)
+ cat <<"EOF"
+ execv (lt_argv_zero, newargz);
+ return rval; /* =127, but avoids unused variable warning */
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+}
+
+void *
+xmalloc (size_t num)
+{
+ void *p = (void *) malloc (num);
+ if (!p)
+ lt_fatal (__FILE__, __LINE__, "memory exhausted");
+
+ return p;
+}
+
+char *
+xstrdup (const char *string)
+{
+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1),
+ string) : NULL;
+}
+
+const char *
+base_name (const char *name)
+{
+ const char *base;
+
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+ /* Skip over the disk name in MSDOS pathnames. */
+ if (isalpha ((unsigned char) name[0]) && name[1] == ':')
+ name += 2;
+#endif
+
+ for (base = name; *name; name++)
+ if (IS_DIR_SEPARATOR (*name))
+ base = name + 1;
+ return base;
+}
+
+int
+check_executable (const char *path)
+{
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if ((stat (path, &st) >= 0)
+ && (st.st_mode & (S_IXUSR | S_IXGRP | S_IXOTH)))
+ return 1;
+ else
+ return 0;
+}
+
+int
+make_executable (const char *path)
+{
+ int rval = 0;
+ struct stat st;
+
+ lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+ nonempty (path));
+ if ((!path) || (!*path))
+ return 0;
+
+ if (stat (path, &st) >= 0)
+ {
+ rval = chmod (path, st.st_mode | S_IXOTH | S_IXGRP | S_IXUSR);
+ }
+ return rval;
+}
+
+/* Searches for the full path of the wrapper. Returns
+ newly allocated full path name if found, NULL otherwise
+ Does not chase symlinks, even on platforms that support them.
+*/
+char *
+find_executable (const char *wrapper)
+{
+ int has_slash = 0;
+ const char *p;
+ const char *p_next;
+ /* static buffer for getcwd */
+ char tmp[LT_PATHMAX + 1];
+ size_t tmp_len;
+ char *concat_name;
+
+ lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+ nonempty (wrapper));
+
+ if ((wrapper == NULL) || (*wrapper == '\0'))
+ return NULL;
+
+ /* Absolute path? */
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+ if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ else
+ {
+#endif
+ if (IS_DIR_SEPARATOR (wrapper[0]))
+ {
+ concat_name = xstrdup (wrapper);
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
+ }
+#endif
+
+ for (p = wrapper; *p; p++)
+ if (*p == '/')
+ {
+ has_slash = 1;
+ break;
+ }
+ if (!has_slash)
+ {
+ /* no slashes; search PATH */
+ const char *path = getenv ("PATH");
+ if (path != NULL)
+ {
+ for (p = path; *p; p = p_next)
+ {
+ const char *q;
+ size_t p_len;
+ for (q = p; *q; q++)
+ if (IS_PATH_SEPARATOR (*q))
+ break;
+ p_len = (size_t) (q - p);
+ p_next = (*q == '\0' ? q : q + 1);
+ if (p_len == 0)
+ {
+ /* empty path: current directory */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name =
+ XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+ }
+ else
+ {
+ concat_name =
+ XMALLOC (char, p_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, p, p_len);
+ concat_name[p_len] = '/';
+ strcpy (concat_name + p_len + 1, wrapper);
+ }
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ }
+ }
+ /* not found in PATH; assume curdir */
+ }
+ /* Relative path | not found in path: prepend cwd */
+ if (getcwd (tmp, LT_PATHMAX) == NULL)
+ lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+ nonnull (strerror (errno)));
+ tmp_len = strlen (tmp);
+ concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
+ memcpy (concat_name, tmp, tmp_len);
+ concat_name[tmp_len] = '/';
+ strcpy (concat_name + tmp_len + 1, wrapper);
+
+ if (check_executable (concat_name))
+ return concat_name;
+ XFREE (concat_name);
+ return NULL;
+}
+
+char *
+chase_symlinks (const char *pathspec)
+{
+#ifndef S_ISLNK
+ return xstrdup (pathspec);
+#else
+ char buf[LT_PATHMAX];
+ struct stat s;
+ char *tmp_pathspec = xstrdup (pathspec);
+ char *p;
+ int has_symlinks = 0;
+ while (strlen (tmp_pathspec) && !has_symlinks)
+ {
+ lt_debugprintf (__FILE__, __LINE__,
+ "checking path component for symlinks: %s\n",
+ tmp_pathspec);
+ if (lstat (tmp_pathspec, &s) == 0)
+ {
+ if (S_ISLNK (s.st_mode) != 0)
+ {
+ has_symlinks = 1;
+ break;
+ }
+
+ /* search backwards for last DIR_SEPARATOR */
+ p = tmp_pathspec + strlen (tmp_pathspec) - 1;
+ while ((p > tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ p--;
+ if ((p == tmp_pathspec) && (!IS_DIR_SEPARATOR (*p)))
+ {
+ /* no more DIR_SEPARATORS left */
+ break;
+ }
+ *p = '\0';
+ }
+ else
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "error accessing file \"%s\": %s",
+ tmp_pathspec, nonnull (strerror (errno)));
+ }
+ }
+ XFREE (tmp_pathspec);
+
+ if (!has_symlinks)
+ {
+ return xstrdup (pathspec);
+ }
+
+ tmp_pathspec = realpath (pathspec, buf);
+ if (tmp_pathspec == 0)
+ {
+ lt_fatal (__FILE__, __LINE__,
+ "could not follow symlinks for %s", pathspec);
+ }
+ return xstrdup (tmp_pathspec);
+#endif
+}
+
+char *
+strendzap (char *str, const char *pat)
+{
+ size_t len, patlen;
+
+ assert (str != NULL);
+ assert (pat != NULL);
+
+ len = strlen (str);
+ patlen = strlen (pat);
+
+ if (patlen <= len)
+ {
+ str += len - patlen;
+ if (STREQ (str, pat))
+ *str = '\0';
+ }
+ return str;
+}
+
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+ va_list args;
+ if (lt_debug)
+ {
+ (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+ va_start (args, fmt);
+ (void) vfprintf (stderr, fmt, args);
+ va_end (args);
+ }
+}
+
+static void
+lt_error_core (int exit_status, const char *file,
+ int line, const char *mode,
+ const char *message, va_list ap)
+{
+ fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
+ vfprintf (stderr, message, ap);
+ fprintf (stderr, ".\n");
+
+ if (exit_status >= 0)
+ exit (exit_status);
+}
+
+void
+lt_fatal (const char *file, int line, const char *message, ...)
+{
+ va_list ap;
+ va_start (ap, message);
+ lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
+ va_end (ap);
+}
+
+static const char *
+nonnull (const char *s)
+{
+ return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+ return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
+void
+lt_setenv (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_setenv) setting '%s' to '%s'\n",
+ nonnull (name), nonnull (value));
+ {
+#ifdef HAVE_SETENV
+ /* always make a copy, for consistency with !HAVE_SETENV */
+ char *str = xstrdup (value);
+ setenv (name, str, 1);
+#else
+ size_t len = strlen (name) + 1 + strlen (value) + 1;
+ char *str = XMALLOC (char, len);
+ sprintf (str, "%s=%s", name, value);
+ if (putenv (str) != EXIT_SUCCESS)
+ {
+ XFREE (str);
+ }
+#endif
+ }
+}
+
+char *
+lt_extend_str (const char *orig_value, const char *add, int to_end)
+{
+ char *new_value;
+ if (orig_value && *orig_value)
+ {
+ size_t orig_value_len = strlen (orig_value);
+ size_t add_len = strlen (add);
+ new_value = XMALLOC (char, add_len + orig_value_len + 1);
+ if (to_end)
+ {
+ strcpy (new_value, orig_value);
+ strcpy (new_value + orig_value_len, add);
+ }
+ else
+ {
+ strcpy (new_value, add);
+ strcpy (new_value + add_len, orig_value);
+ }
+ }
+ else
+ {
+ new_value = xstrdup (add);
+ }
+ return new_value;
+}
+
+void
+lt_update_exe_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ /* some systems can't cope with a ':'-terminated path #' */
+ size_t len = strlen (new_value);
+ while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ {
+ new_value[--len] = '\0';
+ }
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+void
+lt_update_lib_path (const char *name, const char *value)
+{
+ lt_debugprintf (__FILE__, __LINE__,
+ "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+ nonnull (name), nonnull (value));
+
+ if (name && *name && value && *value)
+ {
+ char *new_value = lt_extend_str (getenv (name), value, 0);
+ lt_setenv (name, new_value);
+ XFREE (new_value);
+ }
+}
+
+EOF
+ case $host_os in
+ mingw*)
+ cat <<"EOF"
+
+/* Prepares an argument vector before calling spawn().
+ Note that spawn() does not by itself call the command interpreter
+ (getenv ("COMSPEC") != NULL ? getenv ("COMSPEC") :
+ ({ OSVERSIONINFO v; v.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
+ GetVersionEx(&v);
+ v.dwPlatformId == VER_PLATFORM_WIN32_NT;
+ }) ? "cmd.exe" : "command.com").
+ Instead it simply concatenates the arguments, separated by ' ', and calls
+ CreateProcess(). We must quote the arguments since Win32 CreateProcess()
+ interprets characters like ' ', '\t', '\\', '"' (but not '<' and '>') in a
+ special way:
+ - Space and tab are interpreted as delimiters. They are not treated as
+ delimiters if they are surrounded by double quotes: "...".
+ - Unescaped double quotes are removed from the input. Their only effect is
+ that within double quotes, space and tab are treated like normal
+ characters.
+ - Backslashes not followed by double quotes are not special.
+ - But 2*n+1 backslashes followed by a double quote become
+ n backslashes followed by a double quote (n >= 0):
+ \" -> "
+ \\\" -> \"
+ \\\\\" -> \\"
+ */
+#define SHELL_SPECIAL_CHARS "\"\\ \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+#define SHELL_SPACE_CHARS " \001\002\003\004\005\006\007\010\011\012\013\014\015\016\017\020\021\022\023\024\025\026\027\030\031\032\033\034\035\036\037"
+char **
+prepare_spawn (char **argv)
+{
+ size_t argc;
+ char **new_argv;
+ size_t i;
+
+ /* Count number of arguments. */
+ for (argc = 0; argv[argc] != NULL; argc++)
+ ;
+
+ /* Allocate new argument vector. */
+ new_argv = XMALLOC (char *, argc + 1);
+
+ /* Put quoted arguments into the new argument vector. */
+ for (i = 0; i < argc; i++)
+ {
+ const char *string = argv[i];
+
+ if (string[0] == '\0')
+ new_argv[i] = xstrdup ("\"\"");
+ else if (strpbrk (string, SHELL_SPECIAL_CHARS) != NULL)
+ {
+ int quote_around = (strpbrk (string, SHELL_SPACE_CHARS) != NULL);
+ size_t length;
+ unsigned int backslashes;
+ const char *s;
+ char *quoted_string;
+ char *p;
+
+ length = 0;
+ backslashes = 0;
+ if (quote_around)
+ length++;
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ length += backslashes + 1;
+ length++;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ length += backslashes + 1;
+
+ quoted_string = XMALLOC (char, length + 1);
+
+ p = quoted_string;
+ backslashes = 0;
+ if (quote_around)
+ *p++ = '"';
+ for (s = string; *s != '\0'; s++)
+ {
+ char c = *s;
+ if (c == '"')
+ {
+ unsigned int j;
+ for (j = backslashes + 1; j > 0; j--)
+ *p++ = '\\';
+ }
+ *p++ = c;
+ if (c == '\\')
+ backslashes++;
+ else
+ backslashes = 0;
+ }
+ if (quote_around)
+ {
+ unsigned int j;
+ for (j = backslashes; j > 0; j--)
+ *p++ = '\\';
+ *p++ = '"';
+ }
+ *p = '\0';
+
+ new_argv[i] = quoted_string;
+ }
+ else
+ new_argv[i] = (char *) string;
+ }
+ new_argv[argc] = NULL;
+
+ return new_argv;
+}
+EOF
+ ;;
+ esac
+
+ cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+ func_emit_wrapper yes |
+ $SED -n -e '
+s/^\(.\{79\}\)\(..*\)/\1\
+\2/
+h
+s/\([\\"]\)/\\\1/g
+s/$/\\n/
+s/\([^\n]*\).*/ fputs ("\1", f);/p
+g
+D'
+ cat <<"EOF"
+}
+EOF
+}
+# end: func_emit_cwrapperexe_src
+
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+ $debug_cmd
+
+ case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+ *import*) : ;;
+ *) false ;;
+ esac
+}
+
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+ $debug_cmd
+
+ case " $compile_command " in
+ *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+ suncc_use_cstd_abi=no
+ ;;
+ *)
+ suncc_use_cstd_abi=yes
+ ;;
+ esac
+}
+
+# func_mode_link arg...
+func_mode_link ()
+{
+ $debug_cmd
+
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ # It is impossible to link a dll without this setting, and
+ # we shouldn't force the makefile maintainer to figure out
+ # what system we are compiling for in order to pass an extra
+ # flag for every libtool invocation.
+ # allow_undefined=no
+
+ # FIXME: Unfortunately, there are problems with the above when trying
+ # to make a dll that has undefined symbols, in which case not
+ # even a static library is built. For now, we need to specify
+ # -no-undefined on the libtool link line when we can be certain
+ # that all symbols are satisfied, otherwise we get a static library.
+ allow_undefined=yes
+ ;;
+ *)
+ allow_undefined=yes
+ ;;
+ esac
+ libtool_args=$nonopt
+ base_compile="$nonopt $@"
+ compile_command=$nonopt
+ finalize_command=$nonopt
+
+ compile_rpath=
+ finalize_rpath=
+ compile_shlibpath=
+ finalize_shlibpath=
+ convenience=
+ old_convenience=
+ deplibs=
+ old_deplibs=
+ compiler_flags=
+ linker_flags=
+ dllsearchpath=
+ lib_search_path=`pwd`
+ inst_prefix_dir=
+ new_inherited_linker_flags=
+
+ avoid_version=no
+ bindir=
+ dlfiles=
+ dlprefiles=
+ dlself=no
+ export_dynamic=no
+ export_symbols=
+ export_symbols_regex=
+ generated=
+ libobjs=
+ ltlibs=
+ module=no
+ no_install=no
+ objs=
+ os2dllname=
+ non_pic_objects=
+ precious_files_regex=
+ prefer_static_libs=no
+ preload=false
+ prev=
+ prevarg=
+ release=
+ rpath=
+ xrpath=
+ perm_rpath=
+ temp_rpath=
+ thread_safe=no
+ vinfo=
+ vinfo_number=no
+ weak_libs=
+ single_module=$wl-single_module
+ func_infer_tag $base_compile
+
+ # We need to know -static, to get the right output filenames.
+ for arg
+ do
+ case $arg in
+ -shared)
+ test yes != "$build_libtool_libs" \
+ && func_fatal_configuration "cannot build a shared library"
+ build_old_libs=no
+ break
+ ;;
+ -all-static | -static | -static-libtool-libs)
+ case $arg in
+ -all-static)
+ if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
+ func_warning "complete static linking is impossible in this configuration"
+ fi
+ if test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ -static)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=built
+ ;;
+ -static-libtool-libs)
+ if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ dlopen_self=$dlopen_self_static
+ fi
+ prefer_static_libs=yes
+ ;;
+ esac
+ build_libtool_libs=no
+ build_old_libs=yes
+ break
+ ;;
+ esac
+ done
+
+ # See if our shared archives depend on static archives.
+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes
+
+ # Go through the arguments, transforming them on the way.
+ while test "$#" -gt 0; do
+ arg=$1
+ shift
+ func_quote_for_eval "$arg"
+ qarg=$func_quote_for_eval_unquoted_result
+ func_append libtool_args " $func_quote_for_eval_result"
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$prev"; then
+ case $prev in
+ output)
+ func_append compile_command " @OUTPUT@"
+ func_append finalize_command " @OUTPUT@"
+ ;;
+ esac
+
+ case $prev in
+ bindir)
+ bindir=$arg
+ prev=
+ continue
+ ;;
+ dlfiles|dlprefiles)
+ $preload || {
+ # Add the symbol object into the linking commands.
+ func_append compile_command " @SYMFILE@"
+ func_append finalize_command " @SYMFILE@"
+ preload=:
+ }
+ case $arg in
+ *.la | *.lo) ;; # We handle these cases below.
+ force)
+ if test no = "$dlself"; then
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ self)
+ if test dlprefiles = "$prev"; then
+ dlself=yes
+ elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
+ dlself=yes
+ else
+ dlself=needless
+ export_dynamic=yes
+ fi
+ prev=
+ continue
+ ;;
+ *)
+ if test dlfiles = "$prev"; then
+ func_append dlfiles " $arg"
+ else
+ func_append dlprefiles " $arg"
+ fi
+ prev=
+ continue
+ ;;
+ esac
+ ;;
+ expsyms)
+ export_symbols=$arg
+ test -f "$arg" \
+ || func_fatal_error "symbol file '$arg' does not exist"
+ prev=
+ continue
+ ;;
+ expsyms_regex)
+ export_symbols_regex=$arg
+ prev=
+ continue
+ ;;
+ framework)
+ case $host in
+ *-*-darwin*)
+ case "$deplibs " in
+ *" $qarg.ltframework "*) ;;
+ *) func_append deplibs " $qarg.ltframework" # this is fixed later
+ ;;
+ esac
+ ;;
+ esac
+ prev=
+ continue
+ ;;
+ inst_prefix)
+ inst_prefix_dir=$arg
+ prev=
+ continue
+ ;;
+ mllvm)
+ # Clang does not use LLVM to link, so we can simply discard any
+ # '-mllvm $arg' options when doing the link step.
+ prev=
+ continue
+ ;;
+ objectlist)
+ if test -f "$arg"; then
+ save_arg=$arg
+ moreargs=
+ for fil in `cat "$save_arg"`
+ do
+# func_append moreargs " $fil"
+ arg=$fil
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir=$func_dirname_result
+
+ if test none != "$pic_object"; then
+ # Prepend the subdirectory the object is found in.
+ pic_object=$xdir$pic_object
+
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test dlprefiles = "$prev"; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg=$pic_object
+ fi
+
+ # Non-PIC object.
+ if test none != "$non_pic_object"; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object=$xdir$non_pic_object
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object=$pic_object
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir=$func_dirname_result
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "'$arg' is not a valid libtool object"
+ fi
+ fi
+ done
+ else
+ func_fatal_error "link input file '$arg' does not exist"
+ fi
+ arg=$save_arg
+ prev=
+ continue
+ ;;
+ os2dllname)
+ os2dllname=$arg
+ prev=
+ continue
+ ;;
+ precious_regex)
+ precious_files_regex=$arg
+ prev=
+ continue
+ ;;
+ release)
+ release=-$arg
+ prev=
+ continue
+ ;;
+ rpath | xrpath)
+ # We need an absolute path.
+ case $arg in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ if test rpath = "$prev"; then
+ case "$rpath " in
+ *" $arg "*) ;;
+ *) func_append rpath " $arg" ;;
+ esac
+ else
+ case "$xrpath " in
+ *" $arg "*) ;;
+ *) func_append xrpath " $arg" ;;
+ esac
+ fi
+ prev=
+ continue
+ ;;
+ shrext)
+ shrext_cmds=$arg
+ prev=
+ continue
+ ;;
+ weak)
+ func_append weak_libs " $arg"
+ prev=
+ continue
+ ;;
+ xcclinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xcompiler)
+ func_append compiler_flags " $qarg"
+ prev=
+ func_append compile_command " $qarg"
+ func_append finalize_command " $qarg"
+ continue
+ ;;
+ xlinker)
+ func_append linker_flags " $qarg"
+ func_append compiler_flags " $wl$qarg"
+ prev=
+ func_append compile_command " $wl$qarg"
+ func_append finalize_command " $wl$qarg"
+ continue
+ ;;
+ *)
+ eval "$prev=\"\$arg\""
+ prev=
+ continue
+ ;;
+ esac
+ fi # test -n "$prev"
+
+ prevarg=$arg
+
+ case $arg in
+ -all-static)
+ if test -n "$link_static_flag"; then
+ # See comment for -static flag below, for more details.
+ func_append compile_command " $link_static_flag"
+ func_append finalize_command " $link_static_flag"
+ fi
+ continue
+ ;;
+
+ -allow-undefined)
+ # FIXME: remove this flag sometime in the future.
+ func_fatal_error "'-allow-undefined' must not be used because it is the default"
+ ;;
+
+ -avoid-version)
+ avoid_version=yes
+ continue
+ ;;
+
+ -bindir)
+ prev=bindir
+ continue
+ ;;
+
+ -dlopen)
+ prev=dlfiles
+ continue
+ ;;
+
+ -dlpreopen)
+ prev=dlprefiles
+ continue
+ ;;
+
+ -export-dynamic)
+ export_dynamic=yes
+ continue
+ ;;
+
+ -export-symbols | -export-symbols-regex)
+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
+ func_fatal_error "more than one -exported-symbols argument is not allowed"
+ fi
+ if test X-export-symbols = "X$arg"; then
+ prev=expsyms
+ else
+ prev=expsyms_regex
+ fi
+ continue
+ ;;
+
+ -framework)
+ prev=framework
+ continue
+ ;;
+
+ -inst-prefix-dir)
+ prev=inst_prefix
+ continue
+ ;;
+
+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:*
+ # so, if we see these flags be careful not to treat them like -L
+ -L[A-Z][A-Z]*:*)
+ case $with_gcc/$host in
+ no/*-*-irix* | /*-*-irix*)
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ ;;
+ esac
+ continue
+ ;;
+
+ -L*)
+ func_stripname "-L" '' "$arg"
+ if test -z "$func_stripname_result"; then
+ if test "$#" -gt 0; then
+ func_fatal_error "require no space between '-L' and '$1'"
+ else
+ func_fatal_error "need path for '-L' option"
+ fi
+ fi
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ test -z "$absdir" && \
+ func_fatal_error "cannot determine absolute directory name of '$dir'"
+ dir=$absdir
+ ;;
+ esac
+ case "$deplibs " in
+ *" -L$dir "* | *" $arg "*)
+ # Will only happen for absolute or sysroot arguments
+ ;;
+ *)
+ # Preserve sysroot, but never include relative directories
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]* | =*) func_append deplibs " $arg" ;;
+ *) func_append deplibs " -L$dir" ;;
+ esac
+ func_append lib_search_path " $dir"
+ ;;
+ esac
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$dir:"*) ;;
+ ::) dllsearchpath=$dir;;
+ *) func_append dllsearchpath ":$dir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ continue
+ ;;
+
+ -l*)
+ if test X-lc = "X$arg" || test X-lm = "X$arg"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # These systems don't actually have a C or math library (as such)
+ continue
+ ;;
+ *-*-os2*)
+ # These systems don't actually have a C library (as such)
+ test X-lc = "X$arg" && continue
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+ # Do not include libc due to us having libc/libc_r.
+ test X-lc = "X$arg" && continue
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C and math libraries are in the System framework
+ func_append deplibs " System.ltframework"
+ continue
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ test X-lc = "X$arg" && continue
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ test X-lc = "X$arg" && continue
+ ;;
+ esac
+ elif test X-lc_r = "X$arg"; then
+ case $host in
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
+ # Do not include libc_r directly, use -pthread flag.
+ continue
+ ;;
+ esac
+ fi
+ func_append deplibs " $arg"
+ continue
+ ;;
+
+ -mllvm)
+ prev=mllvm
+ continue
+ ;;
+
+ -module)
+ module=yes
+ continue
+ ;;
+
+ # Tru64 UNIX uses -model [arg] to determine the layout of C++
+ # classes, name mangling, and exception handling.
+ # Darwin uses the -arch flag to determine output architecture.
+ -model|-arch|-isysroot|--sysroot)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ prev=xcompiler
+ continue
+ ;;
+
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ func_append compiler_flags " $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case "$new_inherited_linker_flags " in
+ *" $arg "*) ;;
+ * ) func_append new_inherited_linker_flags " $arg" ;;
+ esac
+ continue
+ ;;
+
+ -multi_module)
+ single_module=$wl-multi_module
+ continue
+ ;;
+
+ -no-fast-install)
+ fast_install=no
+ continue
+ ;;
+
+ -no-install)
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
+ # The PATH hackery in wrapper scripts is required on Windows
+ # and Darwin in order for the loader to find any dlls it needs.
+ func_warning "'-no-install' is ignored for $host"
+ func_warning "assuming '-no-fast-install' instead"
+ fast_install=no
+ ;;
+ *) no_install=yes ;;
+ esac
+ continue
+ ;;
+
+ -no-undefined)
+ allow_undefined=no
+ continue
+ ;;
+
+ -objectlist)
+ prev=objectlist
+ continue
+ ;;
+
+ -os2dllname)
+ prev=os2dllname
+ continue
+ ;;
+
+ -o) prev=output ;;
+
+ -precious-files-regex)
+ prev=precious_regex
+ continue
+ ;;
+
+ -release)
+ prev=release
+ continue
+ ;;
+
+ -rpath)
+ prev=rpath
+ continue
+ ;;
+
+ -R)
+ prev=xrpath
+ continue
+ ;;
+
+ -R*)
+ func_stripname '-R' '' "$arg"
+ dir=$func_stripname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) ;;
+ =*)
+ func_stripname '=' '' "$dir"
+ dir=$lt_sysroot$func_stripname_result
+ ;;
+ *)
+ func_fatal_error "only absolute run-paths are allowed"
+ ;;
+ esac
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ continue
+ ;;
+
+ -shared)
+ # The effects of -shared are defined in a previous loop.
+ continue
+ ;;
+
+ -shrext)
+ prev=shrext
+ continue
+ ;;
+
+ -static | -static-libtool-libs)
+ # The effects of -static are defined in a previous loop.
+ # We used to do the same as -all-static on platforms that
+ # didn't have a PIC flag, but the assumption that the effects
+ # would be equivalent was wrong. It would break on at least
+ # Digital Unix and AIX.
+ continue
+ ;;
+
+ -thread-safe)
+ thread_safe=yes
+ continue
+ ;;
+
+ -version-info)
+ prev=vinfo
+ continue
+ ;;
+
+ -version-number)
+ prev=vinfo
+ vinfo_number=yes
+ continue
+ ;;
+
+ -weak)
+ prev=weak
+ continue
+ ;;
+
+ -Wc,*)
+ func_stripname '-Wc,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs=$IFS; IFS=,
+ for flag in $args; do
+ IFS=$save_ifs
+ func_quote_for_eval "$flag"
+ func_append arg " $func_quote_for_eval_result"
+ func_append compiler_flags " $func_quote_for_eval_result"
+ done
+ IFS=$save_ifs
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Wl,*)
+ func_stripname '-Wl,' '' "$arg"
+ args=$func_stripname_result
+ arg=
+ save_ifs=$IFS; IFS=,
+ for flag in $args; do
+ IFS=$save_ifs
+ func_quote_for_eval "$flag"
+ func_append arg " $wl$func_quote_for_eval_result"
+ func_append compiler_flags " $wl$func_quote_for_eval_result"
+ func_append linker_flags " $func_quote_for_eval_result"
+ done
+ IFS=$save_ifs
+ func_stripname ' ' '' "$arg"
+ arg=$func_stripname_result
+ ;;
+
+ -Xcompiler)
+ prev=xcompiler
+ continue
+ ;;
+
+ -Xlinker)
+ prev=xlinker
+ continue
+ ;;
+
+ -XCClinker)
+ prev=xcclinker
+ continue
+ ;;
+
+ # -msg_* for osf cc
+ -msg_*)
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ ;;
+
+ # Flags to be passed through unchanged, with rationale:
+ # -64, -mips[0-9] enable 64-bit mode for the SGI compiler
+ # -r[0-9][0-9]* specify processor for the SGI compiler
+ # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+ # +DA*, +DD* enable 64-bit mode for the HP compiler
+ # -q* compiler args for the IBM compiler
+ # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+ # -F/path path to uninstalled frameworks, gcc on darwin
+ # -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # -fstack-protector* stack protector flags for GCC
+ # @file GCC response files
+ # -tp=* Portland pgcc target processor selection
+ # --sysroot=* for sysroot support
+ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -stdlib=* select c++ std lib with clang
+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
+ -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
+ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ func_append compiler_flags " $arg"
+ continue
+ ;;
+
+ -Z*)
+ if test os2 = "`expr $host : '.*\(os2\)'`"; then
+ # OS/2 uses -Zxxx to specify OS/2-specific options
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case $arg in
+ -Zlinker | -Zstack)
+ prev=xcompiler
+ ;;
+ esac
+ continue
+ else
+ # Otherwise treat like 'Some other compiler flag' below
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ fi
+ ;;
+
+ # Some other compiler flag.
+ -* | +*)
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ ;;
+
+ *.$objext)
+ # A standard object.
+ func_append objs " $arg"
+ ;;
+
+ *.lo)
+ # A libtool-controlled object.
+
+ # Check to see that this really is a libtool object.
+ if func_lalib_unsafe_p "$arg"; then
+ pic_object=
+ non_pic_object=
+
+ # Read the .lo file
+ func_source "$arg"
+
+ if test -z "$pic_object" ||
+ test -z "$non_pic_object" ||
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
+ fi
+
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir=$func_dirname_result
+
+ test none = "$pic_object" || {
+ # Prepend the subdirectory the object is found in.
+ pic_object=$xdir$pic_object
+
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
+ func_append dlfiles " $pic_object"
+ prev=
+ continue
+ else
+ # If libtool objects are unsupported, then we need to preload.
+ prev=dlprefiles
+ fi
+ fi
+
+ # CHECK ME: I think I busted this. -Ossama
+ if test dlprefiles = "$prev"; then
+ # Preload the old-style object.
+ func_append dlprefiles " $pic_object"
+ prev=
+ fi
+
+ # A PIC object.
+ func_append libobjs " $pic_object"
+ arg=$pic_object
+ }
+
+ # Non-PIC object.
+ if test none != "$non_pic_object"; then
+ # Prepend the subdirectory the object is found in.
+ non_pic_object=$xdir$non_pic_object
+
+ # A standard non-PIC object
+ func_append non_pic_objects " $non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
+ fi
+ else
+ # If the PIC object exists, use it instead.
+ # $xdir was prepended to $pic_object above.
+ non_pic_object=$pic_object
+ func_append non_pic_objects " $non_pic_object"
+ fi
+ else
+ # Only an error if not doing a dry-run.
+ if $opt_dry_run; then
+ # Extract subdirectory from the argument.
+ func_dirname "$arg" "/" ""
+ xdir=$func_dirname_result
+
+ func_lo2o "$arg"
+ pic_object=$xdir$objdir/$func_lo2o_result
+ non_pic_object=$xdir$func_lo2o_result
+ func_append libobjs " $pic_object"
+ func_append non_pic_objects " $non_pic_object"
+ else
+ func_fatal_error "'$arg' is not a valid libtool object"
+ fi
+ fi
+ ;;
+
+ *.$libext)
+ # An archive.
+ func_append deplibs " $arg"
+ func_append old_deplibs " $arg"
+ continue
+ ;;
+
+ *.la)
+ # A libtool-controlled library.
+
+ func_resolve_sysroot "$arg"
+ if test dlfiles = "$prev"; then
+ # This library was specified with -dlopen.
+ func_append dlfiles " $func_resolve_sysroot_result"
+ prev=
+ elif test dlprefiles = "$prev"; then
+ # The library was specified with -dlpreopen.
+ func_append dlprefiles " $func_resolve_sysroot_result"
+ prev=
+ else
+ func_append deplibs " $func_resolve_sysroot_result"
+ fi
+ continue
+ ;;
+
+ # Some other compiler argument.
+ *)
+ # Unknown arguments in both finalize_command and compile_command need
+ # to be aesthetically quoted because they are evaled later.
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ ;;
+ esac # arg
+
+ # Now actually substitute the argument into the commands.
+ if test -n "$arg"; then
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+ done # argument parsing loop
+
+ test -n "$prev" && \
+ func_fatal_help "the '$prevarg' option requires an argument"
+
+ if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
+ eval arg=\"$export_dynamic_flag_spec\"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ fi
+
+ oldlibs=
+ # calculate the name of the file, without its directory
+ func_basename "$output"
+ outputname=$func_basename_result
+ libobjs_save=$libobjs
+
+ if test -n "$shlibpath_var"; then
+ # get the directories listed in $shlibpath_var
+ eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
+ else
+ shlib_search_path=
+ fi
+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+
+ # Definition is injected by LT_CONFIG during libtool generation.
+ func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
+ func_dirname "$output" "/" ""
+ output_objdir=$func_dirname_result$objdir
+ func_to_tool_file "$output_objdir/"
+ tool_output_objdir=$func_to_tool_file_result
+ # Create the object directory.
+ func_mkdir_p "$output_objdir"
+
+ # Determine the type of output
+ case $output in
+ "")
+ func_fatal_help "you must specify an output file"
+ ;;
+ *.$libext) linkmode=oldlib ;;
+ *.lo | *.$objext) linkmode=obj ;;
+ *.la) linkmode=lib ;;
+ *) linkmode=prog ;; # Anything else should be a program.
+ esac
+
+ specialdeplibs=
+
+ libs=
+ # Find all interdependent deplibs by searching for libraries
+ # that are linked more than once (e.g. -la -lb -la)
+ for deplib in $deplibs; do
+ if $opt_preserve_dup_deps; then
+ case "$libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append libs " $deplib"
+ done
+
+ if test lib = "$linkmode"; then
+ libs="$predeps $libs $compiler_lib_search_path $postdeps"
+
+ # Compute libraries that are listed more than once in $predeps
+ # $postdeps and mark them as special (i.e., whose duplicates are
+ # not to be eliminated).
+ pre_post_deps=
+ if $opt_duplicate_compiler_generated_deps; then
+ for pre_post_dep in $predeps $postdeps; do
+ case "$pre_post_deps " in
+ *" $pre_post_dep "*) func_append specialdeplibs " $pre_post_deps" ;;
+ esac
+ func_append pre_post_deps " $pre_post_dep"
+ done
+ fi
+ pre_post_deps=
+ fi
+
+ deplibs=
+ newdependency_libs=
+ newlib_search_path=
+ need_relink=no # whether we're linking any uninstalled libtool libraries
+ notinst_deplibs= # not-installed libtool libraries
+ notinst_path= # paths that contain not-installed libtool libraries
+
+ case $linkmode in
+ lib)
+ passes="conv dlpreopen link"
+ for file in $dlfiles $dlprefiles; do
+ case $file in
+ *.la) ;;
+ *)
+ func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
+ ;;
+ esac
+ done
+ ;;
+ prog)
+ compile_deplibs=
+ finalize_deplibs=
+ alldeplibs=false
+ newdlfiles=
+ newdlprefiles=
+ passes="conv scan dlopen dlpreopen link"
+ ;;
+ *) passes="conv"
+ ;;
+ esac
+
+ for pass in $passes; do
+ # The preopen pass in lib mode reverses $deplibs; put it back here
+ # so that -L comes before libs that need it for instance...
+ if test lib,link = "$linkmode,$pass"; then
+ ## FIXME: Find the place where the list is rebuilt in the wrong
+ ## order, and fix it there properly
+ tmp_deplibs=
+ for deplib in $deplibs; do
+ tmp_deplibs="$deplib $tmp_deplibs"
+ done
+ deplibs=$tmp_deplibs
+ fi
+
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass"; then
+ libs=$deplibs
+ deplibs=
+ fi
+ if test prog = "$linkmode"; then
+ case $pass in
+ dlopen) libs=$dlfiles ;;
+ dlpreopen) libs=$dlprefiles ;;
+ link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
+ esac
+ fi
+ if test lib,dlpreopen = "$linkmode,$pass"; then
+ # Collect and forward deplibs of preopened libtool libs
+ for lib in $dlprefiles; do
+ # Ignore non-libtool-libs
+ dependency_libs=
+ func_resolve_sysroot "$lib"
+ case $lib in
+ *.la) func_source "$func_resolve_sysroot_result" ;;
+ esac
+
+ # Collect preopened libtool deplibs, except any this library
+ # has declared as weak libs
+ for deplib in $dependency_libs; do
+ func_basename "$deplib"
+ deplib_base=$func_basename_result
+ case " $weak_libs " in
+ *" $deplib_base "*) ;;
+ *) func_append deplibs " $deplib" ;;
+ esac
+ done
+ done
+ libs=$dlprefiles
+ fi
+ if test dlopen = "$pass"; then
+ # Collect dlpreopened libraries
+ save_deplibs=$deplibs
+ deplibs=
+ fi
+
+ for deplib in $libs; do
+ lib=
+ found=false
+ case $deplib in
+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
+ |-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append compiler_flags " $deplib"
+ if test lib = "$linkmode"; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -l*)
+ if test lib != "$linkmode" && test prog != "$linkmode"; then
+ func_warning "'-l' is ignored for archives/objects"
+ continue
+ fi
+ func_stripname '-l' '' "$deplib"
+ name=$func_stripname_result
+ if test lib = "$linkmode"; then
+ searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
+ else
+ searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
+ fi
+ for searchdir in $searchdirs; do
+ for search_ext in .la $std_shrext .so .a; do
+ # Search the libtool library
+ lib=$searchdir/lib$name$search_ext
+ if test -f "$lib"; then
+ if test .la = "$search_ext"; then
+ found=:
+ else
+ found=false
+ fi
+ break 2
+ fi
+ done
+ done
+ if $found; then
+ # deplib is a libtool library
+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
+ # We need to do some special things here, and not later.
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $deplib "*)
+ if func_lalib_p "$lib"; then
+ library_names=
+ old_library=
+ func_source "$lib"
+ for l in $old_library $library_names; do
+ ll=$l
+ done
+ if test "X$ll" = "X$old_library"; then # only static version available
+ found=false
+ func_dirname "$lib" "" "."
+ ladir=$func_dirname_result
+ lib=$ladir/$old_library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ fi
+ ;;
+ *) ;;
+ esac
+ fi
+ else
+ # deplib doesn't seem to be a libtool library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
+ fi
+ ;; # -l
+ *.ltframework)
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ if test lib = "$linkmode"; then
+ case "$new_inherited_linker_flags " in
+ *" $deplib "*) ;;
+ * ) func_append new_inherited_linker_flags " $deplib" ;;
+ esac
+ fi
+ fi
+ continue
+ ;;
+ -L*)
+ case $linkmode in
+ lib)
+ deplibs="$deplib $deplibs"
+ test conv = "$pass" && continue
+ newdependency_libs="$deplib $newdependency_libs"
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ prog)
+ if test conv = "$pass"; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ if test scan = "$pass"; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ *)
+ func_warning "'-L' is ignored for archives/objects"
+ ;;
+ esac # linkmode
+ continue
+ ;; # -L
+ -R*)
+ if test link = "$pass"; then
+ func_stripname '-R' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ dir=$func_resolve_sysroot_result
+ # Make sure the xrpath contains only unique directories.
+ case "$xrpath " in
+ *" $dir "*) ;;
+ *) func_append xrpath " $dir" ;;
+ esac
+ fi
+ deplibs="$deplib $deplibs"
+ continue
+ ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ lib=$func_resolve_sysroot_result
+ ;;
+ *.$libext)
+ if test conv = "$pass"; then
+ deplibs="$deplib $deplibs"
+ continue
+ fi
+ case $linkmode in
+ lib)
+ # Linking convenience modules into shared libraries is allowed,
+ # but linking other static libraries is non-portable.
+ case " $dlpreconveniencelibs " in
+ *" $deplib "*) ;;
+ *)
+ valid_a_lib=false
+ case $deplibs_check_method in
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
+ | $EGREP "$match_pattern_regex" > /dev/null; then
+ valid_a_lib=:
+ fi
+ ;;
+ pass_all)
+ valid_a_lib=:
+ ;;
+ esac
+ if $valid_a_lib; then
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ else
+ echo
+ $ECHO "*** Warning: Trying to link with static lib archive $deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because the file extensions .$libext of this argument makes me believe"
+ echo "*** that it is just a static archive that I should not use here."
+ fi
+ ;;
+ esac
+ continue
+ ;;
+ prog)
+ if test link != "$pass"; then
+ deplibs="$deplib $deplibs"
+ else
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ fi
+ continue
+ ;;
+ esac # linkmode
+ ;; # *.$libext
+ *.lo | *.$objext)
+ if test conv = "$pass"; then
+ deplibs="$deplib $deplibs"
+ elif test prog = "$linkmode"; then
+ if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
+ # If there is no dlopen support or we're linking statically,
+ # we need to preload.
+ func_append newdlprefiles " $deplib"
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ func_append newdlfiles " $deplib"
+ fi
+ fi
+ continue
+ ;;
+ %DEPLIBS%)
+ alldeplibs=:
+ continue
+ ;;
+ esac # case $deplib
+
+ $found || test -f "$lib" \
+ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
+
+ # Check to see that this really is a libtool archive.
+ func_lalib_unsafe_p "$lib" \
+ || func_fatal_error "'$lib' is not a valid libtool archive"
+
+ func_dirname "$lib" "" "."
+ ladir=$func_dirname_result
+
+ dlname=
+ dlopen=
+ dlpreopen=
+ libdir=
+ library_names=
+ old_library=
+ inherited_linker_flags=
+ # If the library was installed with an old release of libtool,
+ # it will not redefine variables installed, or shouldnotlink
+ installed=yes
+ shouldnotlink=no
+ avoidtemprpath=
+
+
+ # Read the .la file
+ func_source "$lib"
+
+ # Convert "-framework foo" to "foo.ltframework"
+ if test -n "$inherited_linker_flags"; then
+ tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
+ case " $new_inherited_linker_flags " in
+ *" $tmp_inherited_linker_flag "*) ;;
+ *) func_append new_inherited_linker_flags " $tmp_inherited_linker_flag";;
+ esac
+ done
+ fi
+ dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass" ||
+ { test prog != "$linkmode" && test lib != "$linkmode"; }; then
+ test -n "$dlopen" && func_append dlfiles " $dlopen"
+ test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
+ fi
+
+ if test conv = "$pass"; then
+ # Only check for convenience libraries
+ deplibs="$lib $deplibs"
+ if test -z "$libdir"; then
+ if test -z "$old_library"; then
+ func_fatal_error "cannot find name of link library for '$lib'"
+ fi
+ # It is a libtool convenience library, so add in its objects.
+ func_append convenience " $ladir/$objdir/$old_library"
+ func_append old_convenience " $ladir/$objdir/$old_library"
+ elif test prog != "$linkmode" && test lib != "$linkmode"; then
+ func_fatal_error "'$lib' is not a convenience library"
+ fi
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ deplibs="$deplib $deplibs"
+ if $opt_preserve_dup_deps; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done
+ continue
+ fi # $pass = conv
+
+
+ # Get the name of the library we link against.
+ linklib=
+ if test -n "$old_library" &&
+ { test yes = "$prefer_static_libs" ||
+ test built,no = "$prefer_static_libs,$installed"; }; then
+ linklib=$old_library
+ else
+ for l in $old_library $library_names; do
+ linklib=$l
+ done
+ fi
+ if test -z "$linklib"; then
+ func_fatal_error "cannot find name of link library for '$lib'"
+ fi
+
+ # This library was specified with -dlopen.
+ if test dlopen = "$pass"; then
+ test -z "$libdir" \
+ && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
+ if test -z "$dlname" ||
+ test yes != "$dlopen_support" ||
+ test no = "$build_libtool_libs"
+ then
+ # If there is no dlname, no dlopen support or we're linking
+ # statically, we need to preload. We also need to preload any
+ # dependent libraries so libltdl's deplib preloader doesn't
+ # bomb out in the load deplibs phase.
+ func_append dlprefiles " $lib $dependency_libs"
+ else
+ func_append newdlfiles " $lib"
+ fi
+ continue
+ fi # $pass = dlopen
+
+ # We need an absolute path.
+ case $ladir in
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
+ *)
+ abs_ladir=`cd "$ladir" && pwd`
+ if test -z "$abs_ladir"; then
+ func_warning "cannot determine absolute directory name of '$ladir'"
+ func_warning "passing it literally to the linker, although it might fail"
+ abs_ladir=$ladir
+ fi
+ ;;
+ esac
+ func_basename "$lib"
+ laname=$func_basename_result
+
+ # Find the relevant object directory and library name.
+ if test yes = "$installed"; then
+ if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ func_warning "library '$lib' was moved."
+ dir=$ladir
+ absdir=$abs_ladir
+ libdir=$abs_ladir
+ else
+ dir=$lt_sysroot$libdir
+ absdir=$lt_sysroot$libdir
+ fi
+ test yes = "$hardcode_automatic" && avoidtemprpath=yes
+ else
+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
+ dir=$ladir
+ absdir=$abs_ladir
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ else
+ dir=$ladir/$objdir
+ absdir=$abs_ladir/$objdir
+ # Remove this search path later
+ func_append notinst_path " $abs_ladir"
+ fi
+ fi # $installed = yes
+ func_stripname 'lib' '.la' "$laname"
+ name=$func_stripname_result
+
+ # This library was specified with -dlpreopen.
+ if test dlpreopen = "$pass"; then
+ if test -z "$libdir" && test prog = "$linkmode"; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
+ fi
+ case $host in
+ # special handling for platforms with PE-DLLs.
+ *cygwin* | *mingw* | *cegcc* )
+ # Linker will automatically link against shared library if both
+ # static and shared are present. Therefore, ensure we extract
+ # symbols from the import library if a shared library is present
+ # (otherwise, the dlopen module name will be incorrect). We do
+ # this by putting the import library name into $newdlprefiles.
+ # We recover the dlopen module name by 'saving' the la file
+ # name in a special purpose variable, and (later) extracting the
+ # dlname from the la file.
+ if test -n "$dlname"; then
+ func_tr_sh "$dir/$linklib"
+ eval "libfile_$func_tr_sh_result=\$abs_ladir/\$laname"
+ func_append newdlprefiles " $dir/$linklib"
+ else
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ fi
+ ;;
+ * )
+ # Prefer using a static library (so that no silly _DYNAMIC symbols
+ # are required to link).
+ if test -n "$old_library"; then
+ func_append newdlprefiles " $dir/$old_library"
+ # Keep a list of preopened convenience libraries to check
+ # that they are being used correctly in the link pass.
+ test -z "$libdir" && \
+ func_append dlpreconveniencelibs " $dir/$old_library"
+ # Otherwise, use the dlname, so that lt_dlopen finds it.
+ elif test -n "$dlname"; then
+ func_append newdlprefiles " $dir/$dlname"
+ else
+ func_append newdlprefiles " $dir/$linklib"
+ fi
+ ;;
+ esac
+ fi # $pass = dlpreopen
+
+ if test -z "$libdir"; then
+ # Link the convenience library
+ if test lib = "$linkmode"; then
+ deplibs="$dir/$old_library $deplibs"
+ elif test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$dir/$old_library $compile_deplibs"
+ finalize_deplibs="$dir/$old_library $finalize_deplibs"
+ else
+ deplibs="$lib $deplibs" # used for prog,scan pass
+ fi
+ continue
+ fi
+
+
+ if test prog = "$linkmode" && test link != "$pass"; then
+ func_append newlib_search_path " $ladir"
+ deplibs="$lib $deplibs"
+
+ linkalldeplibs=false
+ if test no != "$link_all_deplibs" || test -z "$library_names" ||
+ test no = "$build_libtool_libs"; then
+ linkalldeplibs=:
+ fi
+
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result"
+ func_append newlib_search_path " $func_resolve_sysroot_result"
+ ;;
+ esac
+ # Need to link against all dependency_libs?
+ if $linkalldeplibs; then
+ deplibs="$deplib $deplibs"
+ else
+ # Need to hardcode shared library paths
+ # or/and link against static libraries
+ newdependency_libs="$deplib $newdependency_libs"
+ fi
+ if $opt_preserve_dup_deps; then
+ case "$tmp_libs " in
+ *" $deplib "*) func_append specialdeplibs " $deplib" ;;
+ esac
+ fi
+ func_append tmp_libs " $deplib"
+ done # for deplib
+ continue
+ fi # $linkmode = prog...
+
+ if test prog,link = "$linkmode,$pass"; then
+ if test -n "$library_names" &&
+ { { test no = "$prefer_static_libs" ||
+ test built,yes = "$prefer_static_libs,$installed"; } ||
+ test -z "$old_library"; }; then
+ # We need to hardcode the library path
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
+ # Make sure the rpath contains only unique directories.
+ case $temp_rpath: in
+ *"$absdir:"*) ;;
+ *) func_append temp_rpath "$absdir:" ;;
+ esac
+ fi
+
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi # $linkmode,$pass = prog,link...
+
+ if $alldeplibs &&
+ { test pass_all = "$deplibs_check_method" ||
+ { test yes = "$build_libtool_libs" &&
+ test -n "$library_names"; }; }; then
+ # We only need to search for static libraries
+ continue
+ fi
+ fi
+
+ link_static=no # Whether the deplib will be linked statically
+ use_static_libs=$prefer_static_libs
+ if test built = "$use_static_libs" && test yes = "$installed"; then
+ use_static_libs=no
+ fi
+ if test -n "$library_names" &&
+ { test no = "$use_static_libs" || test -z "$old_library"; }; then
+ case $host in
+ *cygwin* | *mingw* | *cegcc* | *os2*)
+ # No point in relinking DLLs because paths are not encoded
+ func_append notinst_deplibs " $lib"
+ need_relink=no
+ ;;
+ *)
+ if test no = "$installed"; then
+ func_append notinst_deplibs " $lib"
+ need_relink=yes
+ fi
+ ;;
+ esac
+ # This is a shared library
+
+ # Warn about portability, can't link against -module's on some
+ # systems (darwin). Don't bleat about dlopened modules though!
+ dlopenmodule=
+ for dlpremoduletest in $dlprefiles; do
+ if test "X$dlpremoduletest" = "X$lib"; then
+ dlopenmodule=$dlpremoduletest
+ break
+ fi
+ done
+ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
+ echo
+ if test prog = "$linkmode"; then
+ $ECHO "*** Warning: Linking the executable $output against the loadable module"
+ else
+ $ECHO "*** Warning: Linking the shared library $output against the loadable module"
+ fi
+ $ECHO "*** $linklib is not portable!"
+ fi
+ if test lib = "$linkmode" &&
+ test yes = "$hardcode_into_libs"; then
+ # Hardcode the library path.
+ # Skip directories that are in the system default run-time
+ # search path.
+ case " $sys_lib_dlsearch_path " in
+ *" $absdir "*) ;;
+ *)
+ case "$compile_rpath " in
+ *" $absdir "*) ;;
+ *) func_append compile_rpath " $absdir" ;;
+ esac
+ ;;
+ esac
+ case " $sys_lib_dlsearch_path " in
+ *" $libdir "*) ;;
+ *)
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ ;;
+ esac
+ fi
+
+ if test -n "$old_archive_from_expsyms_cmds"; then
+ # figure out the soname
+ set dummy $library_names
+ shift
+ realname=$1
+ shift
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ # use dlname if we got it. it's perfectly good, no?
+ if test -n "$dlname"; then
+ soname=$dlname
+ elif test -n "$soname_spec"; then
+ # bleh windows
+ case $host in
+ *cygwin* | mingw* | *cegcc* | *os2*)
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix=-$major
+ ;;
+ esac
+ eval soname=\"$soname_spec\"
+ else
+ soname=$realname
+ fi
+
+ # Make a new name for the extract_expsyms_cmds to use
+ soroot=$soname
+ func_basename "$soroot"
+ soname=$func_basename_result
+ func_stripname 'lib' '.dll' "$soname"
+ newlib=libimp-$func_stripname_result.a
+
+ # If the library has no export list, then create one now
+ if test -f "$output_objdir/$soname-def"; then :
+ else
+ func_verbose "extracting exported symbol list from '$soname'"
+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
+ fi
+
+ # Create $newlib
+ if test -f "$output_objdir/$newlib"; then :; else
+ func_verbose "generating import library for '$soname'"
+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
+ fi
+ # make sure the library variables are pointing to the new library
+ dir=$output_objdir
+ linklib=$newlib
+ fi # test -n "$old_archive_from_expsyms_cmds"
+
+ if test prog = "$linkmode" || test relink != "$opt_mode"; then
+ add_shlibpath=
+ add_dir=
+ add=
+ lib_linked=yes
+ case $hardcode_action in
+ immediate | unsupported)
+ if test no = "$hardcode_direct"; then
+ add=$dir/$linklib
+ case $host in
+ *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+ *-*-sysv4*uw2*) add_dir=-L$dir ;;
+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
+ *-*-unixware7*) add_dir=-L$dir ;;
+ *-*-darwin* )
+ # if the lib is a (non-dlopened) module then we cannot
+ # link against it, someone is ignoring the earlier warnings
+ if /usr/bin/file -L $add 2> /dev/null |
+ $GREP ": [^:]* bundle" >/dev/null; then
+ if test "X$dlopenmodule" != "X$lib"; then
+ $ECHO "*** Warning: lib $linklib is a module, not a shared library"
+ if test -z "$old_library"; then
+ echo
+ echo "*** And there doesn't seem to be a static archive available"
+ echo "*** The link will probably fail, sorry"
+ else
+ add=$dir/$old_library
+ fi
+ elif test -n "$old_library"; then
+ add=$dir/$old_library
+ fi
+ fi
+ esac
+ elif test no = "$hardcode_minus_L"; then
+ case $host in
+ *-*-sunos*) add_shlibpath=$dir ;;
+ esac
+ add_dir=-L$dir
+ add=-l$name
+ elif test no = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
+ else
+ lib_linked=no
+ fi
+ ;;
+ relink)
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$dir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$absdir
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
+ else
+ lib_linked=no
+ fi
+ ;;
+ *) lib_linked=no ;;
+ esac
+
+ if test yes != "$lib_linked"; then
+ func_fatal_configuration "unsupported hardcode properties"
+ fi
+
+ if test -n "$add_shlibpath"; then
+ case :$compile_shlibpath: in
+ *":$add_shlibpath:"*) ;;
+ *) func_append compile_shlibpath "$add_shlibpath:" ;;
+ esac
+ fi
+ if test prog = "$linkmode"; then
+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
+ test -n "$add" && compile_deplibs="$add $compile_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ if test yes != "$hardcode_direct" &&
+ test yes != "$hardcode_minus_L" &&
+ test yes = "$hardcode_shlibpath_var"; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ fi
+ fi
+ fi
+
+ if test prog = "$linkmode" || test relink = "$opt_mode"; then
+ add_shlibpath=
+ add_dir=
+ add=
+ # Finalize command for both is simple: just hardcode it.
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$libdir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$libdir
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ case :$finalize_shlibpath: in
+ *":$libdir:"*) ;;
+ *) func_append finalize_shlibpath "$libdir:" ;;
+ esac
+ add=-l$name
+ elif test yes = "$hardcode_automatic"; then
+ if test -n "$inst_prefix_dir" &&
+ test -f "$inst_prefix_dir$libdir/$linklib"; then
+ add=$inst_prefix_dir$libdir/$linklib
+ else
+ add=$libdir/$linklib
+ fi
+ else
+ # We cannot seem to hardcode it, guess we'll fake it.
+ add_dir=-L$libdir
+ # Try looking first in the location we're being installed to.
+ if test -n "$inst_prefix_dir"; then
+ case $libdir in
+ [\\/]*)
+ func_append add_dir " -L$inst_prefix_dir$libdir"
+ ;;
+ esac
+ fi
+ add=-l$name
+ fi
+
+ if test prog = "$linkmode"; then
+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
+ else
+ test -n "$add_dir" && deplibs="$add_dir $deplibs"
+ test -n "$add" && deplibs="$add $deplibs"
+ fi
+ fi
+ elif test prog = "$linkmode"; then
+ # Here we assume that one of hardcode_direct or hardcode_minus_L
+ # is not unsupported. This is valid on all known static and
+ # shared platforms.
+ if test unsupported != "$hardcode_direct"; then
+ test -n "$old_library" && linklib=$old_library
+ compile_deplibs="$dir/$linklib $compile_deplibs"
+ finalize_deplibs="$dir/$linklib $finalize_deplibs"
+ else
+ compile_deplibs="-l$name -L$dir $compile_deplibs"
+ finalize_deplibs="-l$name -L$dir $finalize_deplibs"
+ fi
+ elif test yes = "$build_libtool_libs"; then
+ # Not a shared library
+ if test pass_all != "$deplibs_check_method"; then
+ # We're trying link a shared library against a static one
+ # but the system doesn't support it.
+
+ # Just print a warning and add the library to dependency_libs so
+ # that the program can be linked against the static library.
+ echo
+ $ECHO "*** Warning: This system cannot link to static lib archive $lib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have."
+ if test yes = "$module"; then
+ echo "*** But as you try to build a module library, libtool will still create "
+ echo "*** a static module, that should work as long as the dlopening application"
+ echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test no = "$build_old_libs"; then
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ else
+ deplibs="$dir/$old_library $deplibs"
+ link_static=yes
+ fi
+ fi # link shared/static library?
+
+ if test lib = "$linkmode"; then
+ if test -n "$dependency_libs" &&
+ { test yes != "$hardcode_into_libs" ||
+ test yes = "$build_old_libs" ||
+ test yes = "$link_static"; }; then
+ # Extract -R from dependency_libs
+ temp_deplibs=
+ for libdir in $dependency_libs; do
+ case $libdir in
+ -R*) func_stripname '-R' '' "$libdir"
+ temp_xrpath=$func_stripname_result
+ case " $xrpath " in
+ *" $temp_xrpath "*) ;;
+ *) func_append xrpath " $temp_xrpath";;
+ esac;;
+ *) func_append temp_deplibs " $libdir";;
+ esac
+ done
+ dependency_libs=$temp_deplibs
+ fi
+
+ func_append newlib_search_path " $absdir"
+ # Link against this library
+ test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ # ... and its dependency_libs
+ tmp_libs=
+ for deplib in $dependency_libs; do
+ newdependency_libs="$deplib $newdependency_libs"
+ case $deplib in
+ -L*) func_stripname '-L' '' "$deplib"
+ func_resolve_sysroot "$func_stripname_result";;
+ *) func_resolve_sysroot "$deplib" ;;
+ esac
+ if $opt_preserve_dup_deps; then
+ case "$tmp_libs " in
+ *" $func_resolve_sysroot_result "*)
+ func_append specialdeplibs " $func_resolve_sysroot_result" ;;
+ esac
+ fi
+ func_append tmp_libs " $func_resolve_sysroot_result"
+ done
+
+ if test no != "$link_all_deplibs"; then
+ # Add the search paths of all dependency libraries
+ for deplib in $dependency_libs; do
+ path=
+ case $deplib in
+ -L*) path=$deplib ;;
+ *.la)
+ func_resolve_sysroot "$deplib"
+ deplib=$func_resolve_sysroot_result
+ func_dirname "$deplib" "" "."
+ dir=$func_dirname_result
+ # We need an absolute path.
+ case $dir in
+ [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
+ *)
+ absdir=`cd "$dir" && pwd`
+ if test -z "$absdir"; then
+ func_warning "cannot determine absolute directory name of '$dir'"
+ absdir=$dir
+ fi
+ ;;
+ esac
+ if $GREP "^installed=no" $deplib > /dev/null; then
+ case $host in
+ *-*-darwin*)
+ depdepl=
+ eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names"; then
+ for tmp in $deplibrary_names; do
+ depdepl=$tmp
+ done
+ if test -f "$absdir/$objdir/$depdepl"; then
+ depdepl=$absdir/$objdir/$depdepl
+ darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -z "$darwin_install_name"; then
+ darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ fi
+ func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+ func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
+ path=
+ fi
+ fi
+ ;;
+ *)
+ path=-L$absdir/$objdir
+ ;;
+ esac
+ else
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ test -z "$libdir" && \
+ func_fatal_error "'$deplib' is not a valid libtool archive"
+ test "$absdir" != "$libdir" && \
+ func_warning "'$deplib' seems to be moved"
+
+ path=-L$absdir
+ fi
+ ;;
+ esac
+ case " $deplibs " in
+ *" $path "*) ;;
+ *) deplibs="$path $deplibs" ;;
+ esac
+ done
+ fi # link_all_deplibs != no
+ fi # linkmode = lib
+ done # for deplib in $libs
+ if test link = "$pass"; then
+ if test prog = "$linkmode"; then
+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
+ else
+ compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ fi
+ fi
+ dependency_libs=$newdependency_libs
+ if test dlpreopen = "$pass"; then
+ # Link the dlpreopened libraries before other libraries
+ for deplib in $save_deplibs; do
+ deplibs="$deplib $deplibs"
+ done
+ fi
+ if test dlopen != "$pass"; then
+ test conv = "$pass" || {
+ # Make sure lib_search_path contains only unique directories.
+ lib_search_path=
+ for dir in $newlib_search_path; do
+ case "$lib_search_path " in
+ *" $dir "*) ;;
+ *) func_append lib_search_path " $dir" ;;
+ esac
+ done
+ newlib_search_path=
+ }
+
+ if test prog,link = "$linkmode,$pass"; then
+ vars="compile_deplibs finalize_deplibs"
+ else
+ vars=deplibs
+ fi
+ for var in $vars dependency_libs; do
+ # Add libraries to $var in reverse order
+ eval tmp_libs=\"\$$var\"
+ new_libs=
+ for deplib in $tmp_libs; do
+ # FIXME: Pedantically, this is the right thing to do, so
+ # that some nasty dependency loop isn't accidentally
+ # broken:
+ #new_libs="$deplib $new_libs"
+ # Pragmatically, this seems to cause very few problems in
+ # practice:
+ case $deplib in
+ -L*) new_libs="$deplib $new_libs" ;;
+ -R*) ;;
+ *)
+ # And here is the reason: when a library appears more
+ # than once as an explicit dependence of a library, or
+ # is implicitly linked in more than once by the
+ # compiler, it is considered special, and multiple
+ # occurrences thereof are not removed. Compare this
+ # with having the same library being listed as a
+ # dependency of multiple other libraries: in this case,
+ # we know (pedantically, we assume) the library does not
+ # need to be listed more than once, so we keep only the
+ # last copy. This is not always right, but it is rare
+ # enough that we require users that really mean to play
+ # such unportable linking tricks to link the library
+ # using -Wl,-lname, so that libtool does not consider it
+ # for duplicate removal.
+ case " $specialdeplibs " in
+ *" $deplib "*) new_libs="$deplib $new_libs" ;;
+ *)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) new_libs="$deplib $new_libs" ;;
+ esac
+ ;;
+ esac
+ ;;
+ esac
+ done
+ tmp_libs=
+ for deplib in $new_libs; do
+ case $deplib in
+ -L*)
+ case " $tmp_libs " in
+ *" $deplib "*) ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append tmp_libs " $deplib" ;;
+ esac
+ done
+ eval $var=\"$tmp_libs\"
+ done # for var
+ fi
+
+ # Add Sun CC postdeps if required:
+ test CXX = "$tagname" && {
+ case $host_os in
+ linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C++ 5.9
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ func_cc_basename "$CC"
+ case $func_cc_basename_result in
+ CC* | sunCC*)
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ }
+
+ # Last step: remove runtime libs from dependency_libs
+ # (they stay in deplibs)
+ tmp_libs=
+ for i in $dependency_libs; do
+ case " $predeps $postdeps $compiler_lib_search_path " in
+ *" $i "*)
+ i=
+ ;;
+ esac
+ if test -n "$i"; then
+ func_append tmp_libs " $i"
+ fi
+ done
+ dependency_libs=$tmp_libs
+ done # for pass
+ if test prog = "$linkmode"; then
+ dlfiles=$newdlfiles
+ fi
+ if test prog = "$linkmode" || test lib = "$linkmode"; then
+ dlprefiles=$newdlprefiles
+ fi
+
+ case $linkmode in
+ oldlib)
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for archives"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "'-l' and '-L' are ignored for archives" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "'-rpath' is ignored for archives"
+
+ test -n "$xrpath" && \
+ func_warning "'-R' is ignored for archives"
+
+ test -n "$vinfo" && \
+ func_warning "'-version-info/-version-number' is ignored for archives"
+
+ test -n "$release" && \
+ func_warning "'-release' is ignored for archives"
+
+ test -n "$export_symbols$export_symbols_regex" && \
+ func_warning "'-export-symbols' is ignored for archives"
+
+ # Now set the variables for building old libraries.
+ build_libtool_libs=no
+ oldlibs=$output
+ func_append objs "$old_deplibs"
+ ;;
+
+ lib)
+ # Make sure we only generate libraries of the form 'libNAME.la'.
+ case $outputname in
+ lib*)
+ func_stripname 'lib' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ ;;
+ *)
+ test no = "$module" \
+ && func_fatal_help "libtool library '$output' must begin with 'lib'"
+
+ if test no != "$need_lib_prefix"; then
+ # Add the "lib" prefix for modules if required
+ func_stripname '' '.la' "$outputname"
+ name=$func_stripname_result
+ eval shared_ext=\"$shrext_cmds\"
+ eval libname=\"$libname_spec\"
+ else
+ func_stripname '' '.la' "$outputname"
+ libname=$func_stripname_result
+ fi
+ ;;
+ esac
+
+ if test -n "$objs"; then
+ if test pass_all != "$deplibs_check_method"; then
+ func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
+ else
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
+ $ECHO "*** objects $objs is not portable!"
+ func_append libobjs " $objs"
+ fi
+ fi
+
+ test no = "$dlself" \
+ || func_warning "'-dlopen self' is ignored for libtool libraries"
+
+ set dummy $rpath
+ shift
+ test 1 -lt "$#" \
+ && func_warning "ignoring multiple '-rpath's for a libtool library"
+
+ install_libdir=$1
+
+ oldlibs=
+ if test -z "$rpath"; then
+ if test yes = "$build_libtool_libs"; then
+ # Building a libtool convenience library.
+ # Some compilers have problems with a '.al' extension so
+ # convenience libraries should have the same extension an
+ # archive normally would.
+ oldlibs="$output_objdir/$libname.$libext $oldlibs"
+ build_libtool_libs=convenience
+ build_old_libs=yes
+ fi
+
+ test -n "$vinfo" && \
+ func_warning "'-version-info/-version-number' is ignored for convenience libraries"
+
+ test -n "$release" && \
+ func_warning "'-release' is ignored for convenience libraries"
+ else
+
+ # Parse the version information argument.
+ save_ifs=$IFS; IFS=:
+ set dummy $vinfo 0 0 0
+ shift
+ IFS=$save_ifs
+
+ test -n "$7" && \
+ func_fatal_help "too many parameters to '-version-info'"
+
+ # convert absolute version numbers to libtool ages
+ # this retains compatibility with .la files and attempts
+ # to make the code below a bit more comprehensible
+
+ case $vinfo_number in
+ yes)
+ number_major=$1
+ number_minor=$2
+ number_revision=$3
+ #
+ # There are really only two kinds -- those that
+ # use the current revision as the major version
+ # and those that subtract age and use age as
+ # a minor version. But, then there is irix
+ # that has an extra 1 added just for fun
+ #
+ case $version_type in
+ # correct linux to gnu/linux during the next big refactor
+ darwin|freebsd-elf|linux|osf|windows|none)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age=$number_minor
+ revision=$number_revision
+ ;;
+ freebsd-aout|qnx|sunos)
+ current=$number_major
+ revision=$number_minor
+ age=0
+ ;;
+ irix|nonstopux)
+ func_arith $number_major + $number_minor
+ current=$func_arith_result
+ age=$number_minor
+ revision=$number_minor
+ lt_irix_increment=no
+ ;;
+ esac
+ ;;
+ no)
+ current=$1
+ revision=$2
+ age=$3
+ ;;
+ esac
+
+ # Check that each of the things are valid numbers.
+ case $current in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "CURRENT '$current' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $revision in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "REVISION '$revision' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
+ ;;
+ esac
+
+ case $age in
+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
+ *)
+ func_error "AGE '$age' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
+ ;;
+ esac
+
+ if test "$age" -gt "$current"; then
+ func_error "AGE '$age' is greater than the current interface number '$current'"
+ func_fatal_error "'$vinfo' is not valid version information"
+ fi
+
+ # Calculate the version variables.
+ major=
+ versuffix=
+ verstring=
+ case $version_type in
+ none) ;;
+
+ darwin)
+ # Like Linux, but with the current version available in
+ # verstring for coding it into the library header
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
+ # Darwin ld doesn't like 0 for these options...
+ func_arith $current + 1
+ minor_current=$func_arith_result
+ xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ # On Darwin other compilers
+ case $CC in
+ nagfor*)
+ verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+ ;;
+ *)
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+ esac
+ ;;
+
+ freebsd-aout)
+ major=.$current
+ versuffix=.$current.$revision
+ ;;
+
+ freebsd-elf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
+ ;;
+
+ irix | nonstopux)
+ if test no = "$lt_irix_increment"; then
+ func_arith $current - $age
+ else
+ func_arith $current - $age + 1
+ fi
+ major=$func_arith_result
+
+ case $version_type in
+ nonstopux) verstring_prefix=nonstopux ;;
+ *) verstring_prefix=sgi ;;
+ esac
+ verstring=$verstring_prefix$major.$revision
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$revision
+ while test 0 -ne "$loop"; do
+ func_arith $revision - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring=$verstring_prefix$major.$iface:$verstring
+ done
+
+ # Before this point, $major must not contain '.'.
+ major=.$major
+ versuffix=$major.$revision
+ ;;
+
+ linux) # correct to gnu/linux during the next big refactor
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
+ ;;
+
+ osf)
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=.$current.$age.$revision
+ verstring=$current.$age.$revision
+
+ # Add in all the interfaces that we are compatible with.
+ loop=$age
+ while test 0 -ne "$loop"; do
+ func_arith $current - $loop
+ iface=$func_arith_result
+ func_arith $loop - 1
+ loop=$func_arith_result
+ verstring=$verstring:$iface.0
+ done
+
+ # Make executables depend on our current version.
+ func_append verstring ":$current.0"
+ ;;
+
+ qnx)
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sco)
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sunos)
+ major=.$current
+ versuffix=.$current.$revision
+ ;;
+
+ windows)
+ # Use '-' rather than '.', since we only want one
+ # extension on DOS 8.3 file systems.
+ func_arith $current - $age
+ major=$func_arith_result
+ versuffix=-$major
+ ;;
+
+ *)
+ func_fatal_configuration "unknown library version type '$version_type'"
+ ;;
+ esac
+
+ # Clear the version info if we defaulted, and they specified a release.
+ if test -z "$vinfo" && test -n "$release"; then
+ major=
+ case $version_type in
+ darwin)
+ # we can't check for "0.0" in archive_cmds due to quoting
+ # problems, so we reset it completely
+ verstring=
+ ;;
+ *)
+ verstring=0.0
+ ;;
+ esac
+ if test no = "$need_version"; then
+ versuffix=
+ else
+ versuffix=.0.0
+ fi
+ fi
+
+ # Remove version info from name if versioning should be avoided
+ if test yes,no = "$avoid_version,$need_version"; then
+ major=
+ versuffix=
+ verstring=
+ fi
+
+ # Check to see if the archive will have undefined symbols.
+ if test yes = "$allow_undefined"; then
+ if test unsupported = "$allow_undefined_flag"; then
+ if test yes = "$build_old_libs"; then
+ func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+ build_libtool_libs=no
+ else
+ func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+ fi
+ fi
+ else
+ # Don't allow undefined symbols.
+ allow_undefined_flag=$no_undefined_flag
+ fi
+
+ fi
+
+ func_generate_dlsyms "$libname" "$libname" :
+ func_append libobjs " $symfileobj"
+ test " " = "$libobjs" && libobjs=
+
+ if test relink != "$opt_mode"; then
+ # Remove our outputs, but don't remove object files since they
+ # may have been created when compiling PIC objects.
+ removelist=
+ tempremovelist=`$ECHO "$output_objdir/*"`
+ for p in $tempremovelist; do
+ case $p in
+ *.$objext | *.gcno)
+ ;;
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+ if test -n "$precious_files_regex"; then
+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
+ then
+ continue
+ fi
+ fi
+ func_append removelist " $p"
+ ;;
+ *) ;;
+ esac
+ done
+ test -n "$removelist" && \
+ func_show_eval "${RM}r \$removelist"
+ fi
+
+ # Now set the variables for building old libraries.
+ if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
+ func_append oldlibs " $output_objdir/$libname.$libext"
+
+ # Transform .lo files to .o files.
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
+ fi
+
+ # Eliminate all temporary directories.
+ #for path in $notinst_path; do
+ # lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+ # deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+ # dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
+ #done
+
+ if test -n "$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ temp_xrpath=
+ for libdir in $xrpath; do
+ func_replace_sysroot "$libdir"
+ func_append temp_xrpath " -R$func_replace_sysroot_result"
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
+ dependency_libs="$temp_xrpath $dependency_libs"
+ fi
+ fi
+
+ # Make sure dlfiles contains only unique files that won't be dlpreopened
+ old_dlfiles=$dlfiles
+ dlfiles=
+ for lib in $old_dlfiles; do
+ case " $dlprefiles $dlfiles " in
+ *" $lib "*) ;;
+ *) func_append dlfiles " $lib" ;;
+ esac
+ done
+
+ # Make sure dlprefiles contains only unique files
+ old_dlprefiles=$dlprefiles
+ dlprefiles=
+ for lib in $old_dlprefiles; do
+ case "$dlprefiles " in
+ *" $lib "*) ;;
+ *) func_append dlprefiles " $lib" ;;
+ esac
+ done
+
+ if test yes = "$build_libtool_libs"; then
+ if test -n "$rpath"; then
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
+ # these systems don't actually have a c library (as such)!
+ ;;
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # Rhapsody C library is in the System framework
+ func_append deplibs " System.ltframework"
+ ;;
+ *-*-netbsd*)
+ # Don't link with libc until the a.out ld.so is fixed.
+ ;;
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ # Do not include libc due to us having libc/libc_r.
+ ;;
+ *-*-sco3.2v5* | *-*-sco5v6*)
+ # Causes problems with __ctype
+ ;;
+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
+ # Compiler inserts libc in the correct place for threads to work
+ ;;
+ *)
+ # Add libc to deplibs on all other systems if necessary.
+ if test yes = "$build_libtool_need_lc"; then
+ func_append deplibs " -lc"
+ fi
+ ;;
+ esac
+ fi
+
+ # Transform deplibs into only deplibs that can be linked in shared.
+ name_save=$name
+ libname_save=$libname
+ release_save=$release
+ versuffix_save=$versuffix
+ major_save=$major
+ # I'm not sure if I'm treating the release correctly. I think
+ # release should show up in the -l (ie -lgmp5) so we don't want to
+ # add it in twice. Is that correct?
+ release=
+ versuffix=
+ major=
+ newdeplibs=
+ droppeddeps=no
+ case $deplibs_check_method in
+ pass_all)
+ # Don't check for shared/static. Everything works.
+ # This might be a little naive. We might want to check
+ # whether the library exists or not. But this is on
+ # osf3 & osf4 and I'm not really sure... Just
+ # implementing what was already the behavior.
+ newdeplibs=$deplibs
+ ;;
+ test_compile)
+ # This code stresses the "libraries are programs" paradigm to its
+ # limits. Maybe even breaks it. We compile a program, linking it
+ # against the deplibs as a proxy for the library. Then we can check
+ # whether they linked in statically or dynamically with ldd.
+ $opt_dry_run || $RM conftest.c
+ cat > conftest.c <<EOF
+ int main() { return 0; }
+EOF
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ ldd_output=`ldd conftest`
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=
+ ;;
+ esac
+ fi
+ if test -n "$i"; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which I believe you do not have"
+ echo "*** because a test_compile did reveal that the linker did not use it for"
+ echo "*** its dynamic dependency list that programs get resolved with at runtime."
+ fi
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ else
+ # Error occurred in the first compile. Let's try to salvage
+ # the situation: Compile a separate program for each library.
+ for i in $deplibs; do
+ case $i in
+ -l*)
+ func_stripname -l '' "$i"
+ name=$func_stripname_result
+ $opt_dry_run || $RM conftest
+ if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ ldd_output=`ldd conftest`
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $i "*)
+ func_append newdeplibs " $i"
+ i=
+ ;;
+ esac
+ fi
+ if test -n "$i"; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
+ set dummy $deplib_matches; shift
+ deplib_match=$1
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
+ func_append newdeplibs " $i"
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: dynamic linker does not accept needed library $i."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because a test_compile did reveal that the linker did not use this one"
+ echo "*** as a dynamic dependency that programs can get resolved with at runtime."
+ fi
+ fi
+ else
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning! Library $i is needed by this library but I was not able to"
+ echo "*** make it link in! You will probably need to install it or some"
+ echo "*** library that it depends on before this library will be fully"
+ echo "*** functional. Installing it before continuing would be even better."
+ fi
+ ;;
+ *)
+ func_append newdeplibs " $i"
+ ;;
+ esac
+ done
+ fi
+ ;;
+ file_magic*)
+ set dummy $deplibs_check_method; shift
+ file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib"; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ if test -n "$file_magic_glob"; then
+ libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
+ else
+ libnameglob=$libname
+ fi
+ test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ if test yes = "$want_nocaseglob"; then
+ shopt -s nocaseglob
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ $nocaseglob
+ else
+ potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
+ fi
+ for potent_lib in $potential_libs; do
+ # Follow soft links.
+ if ls -lLd "$potent_lib" 2>/dev/null |
+ $GREP " -> " >/dev/null; then
+ continue
+ fi
+ # The statement above tries to avoid entering an
+ # endless loop below, in case of cyclic links.
+ # We might still enter an endless loop, since a link
+ # loop can be closed while we follow links,
+ # but so what?
+ potlib=$potent_lib
+ while test -h "$potlib" 2>/dev/null; do
+ potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
+ case $potliblink in
+ [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+ *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
+ esac
+ done
+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
+ $SED -e 10q |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib"; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib"; then
+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a file magic. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ match_pattern*)
+ set dummy $deplibs_check_method; shift
+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
+ for a_deplib in $deplibs; do
+ case $a_deplib in
+ -l*)
+ func_stripname -l '' "$a_deplib"
+ name=$func_stripname_result
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ case " $predeps $postdeps " in
+ *" $a_deplib "*)
+ func_append newdeplibs " $a_deplib"
+ a_deplib=
+ ;;
+ esac
+ fi
+ if test -n "$a_deplib"; then
+ libname=`eval "\\$ECHO \"$libname_spec\""`
+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
+ for potent_lib in $potential_libs; do
+ potlib=$potent_lib # see symlink-check above in file_magic test
+ if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
+ $EGREP "$match_pattern_regex" > /dev/null; then
+ func_append newdeplibs " $a_deplib"
+ a_deplib=
+ break 2
+ fi
+ done
+ done
+ fi
+ if test -n "$a_deplib"; then
+ droppeddeps=yes
+ echo
+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib."
+ echo "*** I have the capability to make that library automatically link in when"
+ echo "*** you link to this library. But I can only do this if you have a"
+ echo "*** shared version of the library, which you do not appear to have"
+ echo "*** because I did check the linker path looking for a file starting"
+ if test -z "$potlib"; then
+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
+ else
+ $ECHO "*** with $libname and none of the candidates passed a file format test"
+ $ECHO "*** using a regex pattern. Last file checked: $potlib"
+ fi
+ fi
+ ;;
+ *)
+ # Add a -L argument.
+ func_append newdeplibs " $a_deplib"
+ ;;
+ esac
+ done # Gone through all deplibs.
+ ;;
+ none | unknown | *)
+ newdeplibs=
+ tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ for i in $predeps $postdeps; do
+ # can't use Xsed below, because $i might contain '/'
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
+ done
+ fi
+ case $tmp_deplibs in
+ *[!\ \ ]*)
+ echo
+ if test none = "$deplibs_check_method"; then
+ echo "*** Warning: inter-library dependencies are not supported in this platform."
+ else
+ echo "*** Warning: inter-library dependencies are not known to be supported."
+ fi
+ echo "*** All declared inter-library dependencies are being dropped."
+ droppeddeps=yes
+ ;;
+ esac
+ ;;
+ esac
+ versuffix=$versuffix_save
+ major=$major_save
+ release=$release_save
+ libname=$libname_save
+ name=$name_save
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library with the System framework
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ if test yes = "$droppeddeps"; then
+ if test yes = "$module"; then
+ echo
+ echo "*** Warning: libtool could not satisfy all declared inter-library"
+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create"
+ echo "*** a static module, that should work as long as the dlopening"
+ echo "*** application is linked with the -dlopen flag."
+ if test -z "$global_symbol_pipe"; then
+ echo
+ echo "*** However, this would only work if libtool was able to extract symbol"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
+ echo "*** not find such a program. So, this module is probably useless."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
+ fi
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ else
+ echo "*** The inter-library dependencies that have been dropped here will be"
+ echo "*** automatically added whenever a program is linked with this library"
+ echo "*** or is declared to -dlopen it."
+
+ if test no = "$allow_undefined"; then
+ echo
+ echo "*** Since this library must not contain undefined symbols,"
+ echo "*** because either the platform does not support them or"
+ echo "*** it was explicitly requested with -no-undefined,"
+ echo "*** libtool will only create a static version of it."
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
+ build_libtool_libs=module
+ build_old_libs=yes
+ else
+ build_libtool_libs=no
+ fi
+ fi
+ fi
+ fi
+ # Done checking deplibs!
+ deplibs=$newdeplibs
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ case $host in
+ *-*-darwin*)
+ newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ deplibs=$new_libs
+
+ # All the library-specific variables (install_libdir is set above).
+ library_names=
+ old_library=
+ dlname=
+
+ # Test again, we may have decided not to build it any more
+ if test yes = "$build_libtool_libs"; then
+ # Remove $wl instances when linking with ld.
+ # FIXME: should test the right _cmds variable.
+ case $archive_cmds in
+ *\$LD\ *) wl= ;;
+ esac
+ if test yes = "$hardcode_into_libs"; then
+ # Hardcode the library paths
+ hardcode_libdirs=
+ dep_rpath=
+ rpath=$finalize_rpath
+ test relink = "$opt_mode" || rpath=$compile_rpath$rpath
+ for libdir in $rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ func_replace_sysroot "$libdir"
+ libdir=$func_replace_sysroot_result
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs=$libdir
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append dep_rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir=$hardcode_libdirs
+ eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
+ fi
+ if test -n "$runpath_var" && test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var"
+ fi
+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
+ fi
+
+ shlibpath=$finalize_shlibpath
+ test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
+ if test -n "$shlibpath"; then
+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
+ fi
+
+ # Get the real and link names of the library.
+ eval shared_ext=\"$shrext_cmds\"
+ eval library_names=\"$library_names_spec\"
+ set dummy $library_names
+ shift
+ realname=$1
+ shift
+
+ if test -n "$soname_spec"; then
+ eval soname=\"$soname_spec\"
+ else
+ soname=$realname
+ fi
+ if test -z "$dlname"; then
+ dlname=$soname
+ fi
+
+ lib=$output_objdir/$realname
+ linknames=
+ for link
+ do
+ func_append linknames " $link"
+ done
+
+ # Use standard objects if they are pic
+ test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ test "X$libobjs" = "X " && libobjs=
+
+ delfiles=
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
+ export_symbols=$output_objdir/$libname.uexp
+ func_append delfiles " $export_symbols"
+ fi
+
+ orig_export_symbols=
+ case $host_os in
+ cygwin* | mingw* | cegcc*)
+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
+ # exporting using user supplied symfile
+ func_dll_def_p "$export_symbols" || {
+ # and it's NOT already a .def file. Must figure out
+ # which of the given symbols are data symbols and tag
+ # them as such. So, trigger use of export_symbols_cmds.
+ # export_symbols gets reassigned inside the "prepare
+ # the list of exported symbols" if statement, so the
+ # include_expsyms logic still works.
+ orig_export_symbols=$export_symbols
+ export_symbols=
+ always_export_symbols=yes
+ }
+ fi
+ ;;
+ esac
+
+ # Prepare the list of exported symbols
+ if test -z "$export_symbols"; then
+ if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
+ $opt_dry_run || $RM $export_symbols
+ cmds=$export_symbols_cmds
+ save_ifs=$IFS; IFS='~'
+ for cmd1 in $cmds; do
+ IFS=$save_ifs
+ # Take the normal branch if the nm_file_list_spec branch
+ # doesn't work or if tool conversion is not needed.
+ case $nm_file_list_spec~$to_tool_file_cmd in
+ *~func_convert_file_noop | *~func_convert_file_msys_to_w32 | ~*)
+ try_normal_branch=yes
+ eval cmd=\"$cmd1\"
+ func_len " $cmd"
+ len=$func_len_result
+ ;;
+ *)
+ try_normal_branch=no
+ ;;
+ esac
+ if test yes = "$try_normal_branch" \
+ && { test "$len" -lt "$max_cmd_len" \
+ || test "$max_cmd_len" -le -1; }
+ then
+ func_show_eval "$cmd" 'exit $?'
+ skipped_export=false
+ elif test -n "$nm_file_list_spec"; then
+ func_basename "$output"
+ output_la=$func_basename_result
+ save_libobjs=$libobjs
+ save_output=$output
+ output=$output_objdir/$output_la.nm
+ func_to_tool_file "$output"
+ libobjs=$nm_file_list_spec$func_to_tool_file_result
+ func_append delfiles " $output"
+ func_verbose "creating $NM input file list: $output"
+ for obj in $save_libobjs; do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > "$output"
+ eval cmd=\"$cmd1\"
+ func_show_eval "$cmd" 'exit $?'
+ output=$save_output
+ libobjs=$save_libobjs
+ skipped_export=false
+ else
+ # The command line is too long to execute in one step.
+ func_verbose "using reloadable object file for export list..."
+ skipped_export=:
+ # Break out early, otherwise skipped_export may be
+ # set to false by a later but shorter cmd.
+ break
+ fi
+ done
+ IFS=$save_ifs
+ if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+ fi
+
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands, which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+
+ tmp_deplibs=
+ for test_deplib in $deplibs; do
+ case " $convenience " in
+ *" $test_deplib "*) ;;
+ *)
+ func_append tmp_deplibs " $test_deplib"
+ ;;
+ esac
+ done
+ deplibs=$tmp_deplibs
+
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec" &&
+ test yes = "$compiler_needs_object" &&
+ test -z "$libobjs"; then
+ # extract the archives, so we have objects to list.
+ # TODO: could optimize this to just extract one archive.
+ whole_archive_flag_spec=
+ fi
+ if test -n "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ else
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ fi
+
+ if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
+ eval flag=\"$thread_safe_flag_spec\"
+ func_append linker_flags " $flag"
+ fi
+
+ # Make a backup of the uninstalled library when relinking
+ if test relink = "$opt_mode"; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
+ fi
+
+ # Do each of the archive commands.
+ if test yes = "$module" && test -n "$module_cmds"; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ eval test_cmds=\"$module_expsym_cmds\"
+ cmds=$module_expsym_cmds
+ else
+ eval test_cmds=\"$module_cmds\"
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ eval test_cmds=\"$archive_expsym_cmds\"
+ cmds=$archive_expsym_cmds
+ else
+ eval test_cmds=\"$archive_cmds\"
+ cmds=$archive_cmds
+ fi
+ fi
+
+ if test : != "$skipped_export" &&
+ func_len " $test_cmds" &&
+ len=$func_len_result &&
+ test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ :
+ else
+ # The command line is too long to link in one step, link piecewise
+ # or, if using GNU ld and skipped_export is not :, use a linker
+ # script.
+
+ # Save the value of $output and $libobjs because we want to
+ # use them later. If we have whole_archive_flag_spec, we
+ # want to use save_libobjs as it was before
+ # whole_archive_flag_spec was expanded, because we can't
+ # assume the linker understands whole_archive_flag_spec.
+ # This may have to be revisited, in case too many
+ # convenience libraries get linked in and end up exceeding
+ # the spec.
+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then
+ save_libobjs=$libobjs
+ fi
+ save_output=$output
+ func_basename "$output"
+ output_la=$func_basename_result
+
+ # Clear the reloadable object creation command queue and
+ # initialize k to one.
+ test_cmds=
+ concat_cmds=
+ objlist=
+ last_robj=
+ k=1
+
+ if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+ output=$output_objdir/$output_la.lnkscript
+ func_verbose "creating GNU ld script: $output"
+ echo 'INPUT (' > $output
+ for obj in $save_libobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ echo ')' >> $output
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$func_to_tool_file_result
+ elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+ output=$output_objdir/$output_la.lnk
+ func_verbose "creating linker input file list: $output"
+ : > $output
+ set x $save_libobjs
+ shift
+ firstobj=
+ if test yes = "$compiler_needs_object"; then
+ firstobj="$1 "
+ shift
+ fi
+ for obj
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result" >> $output
+ done
+ func_append delfiles " $output"
+ func_to_tool_file "$output"
+ output=$firstobj\"$file_list_spec$func_to_tool_file_result\"
+ else
+ if test -n "$save_libobjs"; then
+ func_verbose "creating reloadable object files..."
+ output=$output_objdir/$output_la-$k.$objext
+ eval test_cmds=\"$reload_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+
+ # Loop over the list of objects to be linked.
+ for obj in $save_libobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ if test -z "$objlist" ||
+ test "$len" -lt "$max_cmd_len"; then
+ func_append objlist " $obj"
+ else
+ # The command $test_cmds is almost too long, add a
+ # command to the queue.
+ if test 1 -eq "$k"; then
+ # The first file doesn't have a previous command to add.
+ reload_objs=$objlist
+ eval concat_cmds=\"$reload_cmds\"
+ else
+ # All subsequent reloadable object files will link in
+ # the last one created.
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
+ fi
+ last_robj=$output_objdir/$output_la-$k.$objext
+ func_arith $k + 1
+ k=$func_arith_result
+ output=$output_objdir/$output_la-$k.$objext
+ objlist=" $obj"
+ func_len " $last_robj"
+ func_arith $len0 + $func_len_result
+ len=$func_arith_result
+ fi
+ done
+ # Handle the remaining objects by creating one last
+ # reloadable object file. All subsequent reloadable object
+ # files will link in the last one created.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ reload_objs="$objlist $last_robj"
+ eval concat_cmds=\"\$concat_cmds$reload_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ func_append delfiles " $output"
+
+ else
+ output=
+ fi
+
+ ${skipped_export-false} && {
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
+ $opt_dry_run || $RM $export_symbols
+ libobjs=$output
+ # Append the command to create the export file.
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\"
+ if test -n "$last_robj"; then
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
+ fi
+ }
+
+ test -n "$save_libobjs" &&
+ func_verbose "creating a temporary reloadable object file: $output"
+
+ # Loop through the commands generated above and execute them.
+ save_ifs=$IFS; IFS='~'
+ for cmd in $concat_cmds; do
+ IFS=$save_ifs
+ $opt_quiet || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test relink = "$opt_mode"; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS=$save_ifs
+
+ if test -n "$export_symbols_regex" && ${skipped_export-false}; then
+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
+ fi
+ fi
+
+ ${skipped_export-false} && {
+ if test -n "$export_symbols" && test -n "$include_expsyms"; then
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
+ $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
+ fi
+
+ if test -n "$orig_export_symbols"; then
+ # The given exports_symbols file has to be filtered, so filter it.
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
+ # FIXME: $output_objdir/$libname.filter potentially contains lots of
+ # 's' commands, which not all seds can handle. GNU sed should be fine
+ # though. Also, the filter scales superlinearly with the number of
+ # global variables. join(1) would be nice here, but unfortunately
+ # isn't a blessed tool.
+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter
+ func_append delfiles " $export_symbols $output_objdir/$libname.filter"
+ export_symbols=$output_objdir/$libname.def
+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
+ fi
+ }
+
+ libobjs=$output
+ # Restore the value of output.
+ output=$save_output
+
+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then
+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+ # Expand the library linking commands again to reset the
+ # value of $libobjs for piecewise linking.
+
+ # Do each of the archive commands.
+ if test yes = "$module" && test -n "$module_cmds"; then
+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
+ cmds=$module_expsym_cmds
+ else
+ cmds=$module_cmds
+ fi
+ else
+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then
+ cmds=$archive_expsym_cmds
+ else
+ cmds=$archive_cmds
+ fi
+ fi
+ fi
+
+ if test -n "$delfiles"; then
+ # Append the command to remove temporary files to $cmds.
+ eval cmds=\"\$cmds~\$RM $delfiles\"
+ fi
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append libobjs " $func_extract_archives_result"
+ test "X$libobjs" = "X " && libobjs=
+ fi
+
+ save_ifs=$IFS; IFS='~'
+ for cmd in $cmds; do
+ IFS=$sp$nl
+ eval cmd=\"$cmd\"
+ IFS=$save_ifs
+ $opt_quiet || {
+ func_quote_for_expand "$cmd"
+ eval "func_echo $func_quote_for_expand_result"
+ }
+ $opt_dry_run || eval "$cmd" || {
+ lt_exit=$?
+
+ # Restore the uninstalled library and exit
+ if test relink = "$opt_mode"; then
+ ( cd "$output_objdir" && \
+ $RM "${realname}T" && \
+ $MV "${realname}U" "$realname" )
+ fi
+
+ exit $lt_exit
+ }
+ done
+ IFS=$save_ifs
+
+ # Restore the uninstalled library and exit
+ if test relink = "$opt_mode"; then
+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
+
+ if test -n "$convenience"; then
+ if test -z "$whole_archive_flag_spec"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ # Create links to the real library.
+ for linkname in $linknames; do
+ if test "$realname" != "$linkname"; then
+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?'
+ fi
+ done
+
+ # If -module or -export-dynamic was specified, set the dlname.
+ if test yes = "$module" || test yes = "$export_dynamic"; then
+ # On all known operating systems, these are identical.
+ dlname=$soname
+ fi
+ fi
+ ;;
+
+ obj)
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for objects"
+ fi
+
+ case " $deplibs" in
+ *\ -l* | *\ -L*)
+ func_warning "'-l' and '-L' are ignored for objects" ;;
+ esac
+
+ test -n "$rpath" && \
+ func_warning "'-rpath' is ignored for objects"
+
+ test -n "$xrpath" && \
+ func_warning "'-R' is ignored for objects"
+
+ test -n "$vinfo" && \
+ func_warning "'-version-info' is ignored for objects"
+
+ test -n "$release" && \
+ func_warning "'-release' is ignored for objects"
+
+ case $output in
+ *.lo)
+ test -n "$objs$old_deplibs" && \
+ func_fatal_error "cannot build library object '$output' from non-libtool objects"
+
+ libobj=$output
+ func_lo2o "$libobj"
+ obj=$func_lo2o_result
+ ;;
+ *)
+ libobj=
+ obj=$output
+ ;;
+ esac
+
+ # Delete the old objects.
+ $opt_dry_run || $RM $obj $libobj
+
+ # Objects from convenience libraries. This assumes
+ # single-version convenience libraries. Whenever we create
+ # different ones for PIC/non-PIC, this we'll have to duplicate
+ # the extraction.
+ reload_conv_objs=
+ gentop=
+ # if reload_cmds runs $LD directly, get rid of -Wl from
+ # whole_archive_flag_spec and hope we can get by with turning comma
+ # into space.
+ case $reload_cmds in
+ *\$LD[\ \$]*) wl= ;;
+ esac
+ if test -n "$convenience"; then
+ if test -n "$whole_archive_flag_spec"; then
+ eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
+ test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
+ else
+ gentop=$output_objdir/${obj}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $convenience
+ reload_conv_objs="$reload_objs $func_extract_archives_result"
+ fi
+ fi
+
+ # If we're not building shared, we need to use non_pic_objs
+ test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
+
+ # Create the old-style object.
+ reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
+
+ output=$obj
+ func_execute_cmds "$reload_cmds" 'exit $?'
+
+ # Exit if we aren't doing a library object file.
+ if test -z "$libobj"; then
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ test yes = "$build_libtool_libs" || {
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ # Create an invalid libtool object if no PIC, so that we don't
+ # accidentally link it into a program.
+ # $show "echo timestamp > $libobj"
+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
+ exit $EXIT_SUCCESS
+ }
+
+ if test -n "$pic_flag" || test default != "$pic_mode"; then
+ # Only do commands if we really have different PIC objects.
+ reload_objs="$libobjs $reload_conv_objs"
+ output=$libobj
+ func_execute_cmds "$reload_cmds" 'exit $?'
+ fi
+
+ if test -n "$gentop"; then
+ func_show_eval '${RM}r "$gentop"'
+ fi
+
+ exit $EXIT_SUCCESS
+ ;;
+
+ prog)
+ case $host in
+ *cygwin*) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result.exe;;
+ esac
+ test -n "$vinfo" && \
+ func_warning "'-version-info' is ignored for programs"
+
+ test -n "$release" && \
+ func_warning "'-release' is ignored for programs"
+
+ $preload \
+ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
+
+ case $host in
+ *-*-rhapsody* | *-*-darwin1.[012])
+ # On Rhapsody replace the C library is the System framework
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
+ ;;
+ esac
+
+ case $host in
+ *-*-darwin*)
+ # Don't allow lazy linking, it breaks C++ global constructors
+ # But is supposedly fixed on 10.4 or later (yay!).
+ if test CXX = "$tagname"; then
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
+ 10.[0123])
+ func_append compile_command " $wl-bind_at_load"
+ func_append finalize_command " $wl-bind_at_load"
+ ;;
+ esac
+ fi
+ # Time to change all our "foo.ltframework" stuff back to "-framework foo"
+ compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+ ;;
+ esac
+
+
+ # move library search paths that coincide with paths to not yet
+ # installed libraries to the beginning of the library search list
+ new_libs=
+ for path in $notinst_path; do
+ case " $new_libs " in
+ *" -L$path/$objdir "*) ;;
+ *)
+ case " $compile_deplibs " in
+ *" -L$path/$objdir "*)
+ func_append new_libs " -L$path/$objdir" ;;
+ esac
+ ;;
+ esac
+ done
+ for deplib in $compile_deplibs; do
+ case $deplib in
+ -L*)
+ case " $new_libs " in
+ *" $deplib "*) ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ ;;
+ *) func_append new_libs " $deplib" ;;
+ esac
+ done
+ compile_deplibs=$new_libs
+
+
+ func_append compile_command " $compile_deplibs"
+ func_append finalize_command " $finalize_deplibs"
+
+ if test -n "$rpath$xrpath"; then
+ # If the user specified any rpath flags, then add them.
+ for libdir in $rpath $xrpath; do
+ # This is the magic to use -rpath.
+ case "$finalize_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_rpath " $libdir" ;;
+ esac
+ done
+ fi
+
+ # Now hardcode the library paths
+ rpath=
+ hardcode_libdirs=
+ for libdir in $compile_rpath $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs=$libdir
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append perm_rpath " $libdir" ;;
+ esac
+ fi
+ case $host in
+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
+ testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
+ case :$dllsearchpath: in
+ *":$libdir:"*) ;;
+ ::) dllsearchpath=$libdir;;
+ *) func_append dllsearchpath ":$libdir";;
+ esac
+ case :$dllsearchpath: in
+ *":$testbindir:"*) ;;
+ ::) dllsearchpath=$testbindir;;
+ *) func_append dllsearchpath ":$testbindir";;
+ esac
+ ;;
+ esac
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir=$hardcode_libdirs
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ compile_rpath=$rpath
+
+ rpath=
+ hardcode_libdirs=
+ for libdir in $finalize_rpath; do
+ if test -n "$hardcode_libdir_flag_spec"; then
+ if test -n "$hardcode_libdir_separator"; then
+ if test -z "$hardcode_libdirs"; then
+ hardcode_libdirs=$libdir
+ else
+ # Just accumulate the unique libdirs.
+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*)
+ ;;
+ *)
+ func_append hardcode_libdirs "$hardcode_libdir_separator$libdir"
+ ;;
+ esac
+ fi
+ else
+ eval flag=\"$hardcode_libdir_flag_spec\"
+ func_append rpath " $flag"
+ fi
+ elif test -n "$runpath_var"; then
+ case "$finalize_perm_rpath " in
+ *" $libdir "*) ;;
+ *) func_append finalize_perm_rpath " $libdir" ;;
+ esac
+ fi
+ done
+ # Substitute the hardcoded libdirs into the rpath.
+ if test -n "$hardcode_libdir_separator" &&
+ test -n "$hardcode_libdirs"; then
+ libdir=$hardcode_libdirs
+ eval rpath=\" $hardcode_libdir_flag_spec\"
+ fi
+ finalize_rpath=$rpath
+
+ if test -n "$libobjs" && test yes = "$build_old_libs"; then
+ # Transform all the library objects into standard objects.
+ compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+ fi
+
+ func_generate_dlsyms "$outputname" "@PROGRAM@" false
+
+ # template prelinking step
+ if test -n "$prelink_cmds"; then
+ func_execute_cmds "$prelink_cmds" 'exit $?'
+ fi
+
+ wrappers_required=:
+ case $host in
+ *cegcc* | *mingw32ce*)
+ # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+ wrappers_required=false
+ ;;
+ *cygwin* | *mingw* )
+ test yes = "$build_libtool_libs" || wrappers_required=false
+ ;;
+ *)
+ if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+ wrappers_required=false
+ fi
+ ;;
+ esac
+ $wrappers_required || {
+ # Replace the output file specification.
+ compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ link_command=$compile_command$compile_rpath
+
+ # We have no uninstalled library dependencies, so finalize right now.
+ exit_status=0
+ func_show_eval "$link_command" 'exit_status=$?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Delete the generated files.
+ if test -f "$output_objdir/${outputname}S.$objext"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
+ fi
+
+ exit $exit_status
+ }
+
+ if test -n "$compile_shlibpath$finalize_shlibpath"; then
+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
+ fi
+ if test -n "$finalize_shlibpath"; then
+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command"
+ fi
+
+ compile_var=
+ finalize_var=
+ if test -n "$runpath_var"; then
+ if test -n "$perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ if test -n "$finalize_perm_rpath"; then
+ # We should set the runpath_var.
+ rpath=
+ for dir in $finalize_perm_rpath; do
+ func_append rpath "$dir:"
+ done
+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" "
+ fi
+ fi
+
+ if test yes = "$no_install"; then
+ # We don't need to create a wrapper script.
+ link_command=$compile_var$compile_command$compile_rpath
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
+ # Delete the old output file.
+ $opt_dry_run || $RM $output
+ # Link the executable and exit
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ exit $EXIT_SUCCESS
+ fi
+
+ case $hardcode_action,$fast_install in
+ relink,*)
+ # Fast installation is not supported
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "'$output' will be relinked during installation"
+ ;;
+ *,yes)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ ;;
+ *,no)
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+ ;;
+ *,needless)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=
+ ;;
+ esac
+
+ # Replace the output file specification.
+ link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+
+ # Delete the old output files.
+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
+
+ func_show_eval "$link_command" 'exit $?'
+
+ if test -n "$postlink_cmds"; then
+ func_to_tool_file "$output_objdir/$outputname"
+ postlink_cmds=`func_echo_all "$postlink_cmds" | $SED -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g' -e 's%@TOOL_OUTPUT@%'"$func_to_tool_file_result"'%g'`
+ func_execute_cmds "$postlink_cmds" 'exit $?'
+ fi
+
+ # Now create the wrapper script.
+ func_verbose "creating $output"
+
+ # Quote the relink command for shipping.
+ if test -n "$relink_command"; then
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ relink_command="(cd `pwd`; $relink_command)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ fi
+
+ # Only actually do things if not in dry run mode.
+ $opt_dry_run || {
+ # win32 will think the script is a binary if it has
+ # a .exe suffix, so we strip it off here.
+ case $output in
+ *.exe) func_stripname '' '.exe' "$output"
+ output=$func_stripname_result ;;
+ esac
+ # test for cygwin because mv fails w/o .exe extensions
+ case $host in
+ *cygwin*)
+ exeext=.exe
+ func_stripname '' '.exe' "$outputname"
+ outputname=$func_stripname_result ;;
+ *) exeext= ;;
+ esac
+ case $host in
+ *cygwin* | *mingw* )
+ func_dirname_and_basename "$output" "" "."
+ output_name=$func_basename_result
+ output_path=$func_dirname_result
+ cwrappersource=$output_path/$objdir/lt-$output_name.c
+ cwrapper=$output_path/$output_name.exe
+ $RM $cwrappersource $cwrapper
+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_cwrapperexe_src > $cwrappersource
+
+ # The wrapper executable is built using the $host compiler,
+ # because it contains $host paths and files. If cross-
+ # compiling, it, like the target executable, must be
+ # executed on the $host or under an emulation environment.
+ $opt_dry_run || {
+ $LTCC $LTCFLAGS -o $cwrapper $cwrappersource
+ $STRIP $cwrapper
+ }
+
+ # Now, create the wrapper script for func_source use:
+ func_ltwrapper_scriptname $cwrapper
+ $RM $func_ltwrapper_scriptname_result
+ trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
+ $opt_dry_run || {
+ # note: this script will not be executed, so do not chmod.
+ if test "x$build" = "x$host"; then
+ $cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
+ else
+ func_emit_wrapper no > $func_ltwrapper_scriptname_result
+ fi
+ }
+ ;;
+ * )
+ $RM $output
+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15
+
+ func_emit_wrapper no > $output
+ chmod +x $output
+ ;;
+ esac
+ }
+ exit $EXIT_SUCCESS
+ ;;
+ esac
+
+ # See if we need to build an old-fashioned archive.
+ for oldlib in $oldlibs; do
+
+ case $build_libtool_libs in
+ convenience)
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs=$convenience
+ build_libtool_libs=no
+ ;;
+ module)
+ oldobjs=$libobjs_save
+ addlibs=$old_convenience
+ build_libtool_libs=no
+ ;;
+ *)
+ oldobjs="$old_deplibs $non_pic_objects"
+ $preload && test -f "$symfileobj" \
+ && func_append oldobjs " $symfileobj"
+ addlibs=$old_convenience
+ ;;
+ esac
+
+ if test -n "$addlibs"; then
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $addlibs
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # Do each command in the archive commands.
+ if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
+ cmds=$old_archive_from_new_cmds
+ else
+
+ # Add any objects from preloaded convenience libraries
+ if test -n "$dlprefiles"; then
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+
+ func_extract_archives $gentop $dlprefiles
+ func_append oldobjs " $func_extract_archives_result"
+ fi
+
+ # POSIX demands no paths to be encoded in archives. We have
+ # to avoid creating archives with duplicate basenames if we
+ # might have to extract them afterwards, e.g., when creating a
+ # static archive out of a convenience library, or when linking
+ # the entirety of a libtool archive into another (currently
+ # not supported by libtool).
+ if (for obj in $oldobjs
+ do
+ func_basename "$obj"
+ $ECHO "$func_basename_result"
+ done | sort | sort -uc >/dev/null 2>&1); then
+ :
+ else
+ echo "copying selected object files to avoid basename conflicts..."
+ gentop=$output_objdir/${outputname}x
+ func_append generated " $gentop"
+ func_mkdir_p "$gentop"
+ save_oldobjs=$oldobjs
+ oldobjs=
+ counter=1
+ for obj in $save_oldobjs
+ do
+ func_basename "$obj"
+ objbase=$func_basename_result
+ case " $oldobjs " in
+ " ") oldobjs=$obj ;;
+ *[\ /]"$objbase "*)
+ while :; do
+ # Make sure we don't pick an alternate name that also
+ # overlaps.
+ newobj=lt$counter-$objbase
+ func_arith $counter + 1
+ counter=$func_arith_result
+ case " $oldobjs " in
+ *[\ /]"$newobj "*) ;;
+ *) if test ! -f "$gentop/$newobj"; then break; fi ;;
+ esac
+ done
+ func_show_eval "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj"
+ func_append oldobjs " $gentop/$newobj"
+ ;;
+ *) func_append oldobjs " $obj" ;;
+ esac
+ done
+ fi
+ func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
+ tool_oldlib=$func_to_tool_file_result
+ eval cmds=\"$old_archive_cmds\"
+
+ func_len " $cmds"
+ len=$func_len_result
+ if test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
+ cmds=$old_archive_cmds
+ elif test -n "$archiver_list_spec"; then
+ func_verbose "using command file archive linking..."
+ for obj in $oldobjs
+ do
+ func_to_tool_file "$obj"
+ $ECHO "$func_to_tool_file_result"
+ done > $output_objdir/$libname.libcmd
+ func_to_tool_file "$output_objdir/$libname.libcmd"
+ oldobjs=" $archiver_list_spec$func_to_tool_file_result"
+ cmds=$old_archive_cmds
+ else
+ # the command line is too long to link in one step, link in parts
+ func_verbose "using piecewise archive linking..."
+ save_RANLIB=$RANLIB
+ RANLIB=:
+ objlist=
+ concat_cmds=
+ save_oldobjs=$oldobjs
+ oldobjs=
+ # Is there a better way of finding the last object in the list?
+ for obj in $save_oldobjs
+ do
+ last_oldobj=$obj
+ done
+ eval test_cmds=\"$old_archive_cmds\"
+ func_len " $test_cmds"
+ len0=$func_len_result
+ len=$len0
+ for obj in $save_oldobjs
+ do
+ func_len " $obj"
+ func_arith $len + $func_len_result
+ len=$func_arith_result
+ func_append objlist " $obj"
+ if test "$len" -lt "$max_cmd_len"; then
+ :
+ else
+ # the above command should be used before it gets too long
+ oldobjs=$objlist
+ if test "$obj" = "$last_oldobj"; then
+ RANLIB=$save_RANLIB
+ fi
+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~
+ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
+ objlist=
+ len=$len0
+ fi
+ done
+ RANLIB=$save_RANLIB
+ oldobjs=$objlist
+ if test -z "$oldobjs"; then
+ eval cmds=\"\$concat_cmds\"
+ else
+ eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
+ fi
+ fi
+ fi
+ func_execute_cmds "$cmds" 'exit $?'
+ done
+
+ test -n "$generated" && \
+ func_show_eval "${RM}r$generated"
+
+ # Now create the libtool archive.
+ case $output in
+ *.la)
+ old_library=
+ test yes = "$build_old_libs" && old_library=$libname.$libext
+ func_verbose "creating $output"
+
+ # Preserve any variables that may affect compiler behavior
+ for var in $variables_saved_for_relink; do
+ if eval test -z \"\${$var+set}\"; then
+ relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command"
+ elif eval var_value=\$$var; test -z "$var_value"; then
+ relink_command="$var=; export $var; $relink_command"
+ else
+ func_quote_for_eval "$var_value"
+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command"
+ fi
+ done
+ # Quote the link command for shipping.
+ relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
+ if test yes = "$hardcode_automatic"; then
+ relink_command=
+ fi
+
+ # Only create the output if not a dry run.
+ $opt_dry_run || {
+ for installed in no yes; do
+ if test yes = "$installed"; then
+ if test -z "$install_libdir"; then
+ break
+ fi
+ output=$output_objdir/${outputname}i
+ # Replace all uninstalled libtool libraries with the installed ones
+ newdependency_libs=
+ for deplib in $dependency_libs; do
+ case $deplib in
+ *.la)
+ func_basename "$deplib"
+ name=$func_basename_result
+ func_resolve_sysroot "$deplib"
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ test -z "$libdir" && \
+ func_fatal_error "'$deplib' is not a valid libtool archive"
+ func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ -L*)
+ func_stripname -L '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -L$func_replace_sysroot_result"
+ ;;
+ -R*)
+ func_stripname -R '' "$deplib"
+ func_replace_sysroot "$func_stripname_result"
+ func_append newdependency_libs " -R$func_replace_sysroot_result"
+ ;;
+ *) func_append newdependency_libs " $deplib" ;;
+ esac
+ done
+ dependency_libs=$newdependency_libs
+ newdlfiles=
+
+ for lib in $dlfiles; do
+ case $lib in
+ *.la)
+ func_basename "$lib"
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "'$lib' is not a valid libtool archive"
+ func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ *) func_append newdlfiles " $lib" ;;
+ esac
+ done
+ dlfiles=$newdlfiles
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ *.la)
+ # Only pass preopened files to the pseudo-archive (for
+ # eventual linking with the app. that links it) if we
+ # didn't already link the preopened objects directly into
+ # the library:
+ func_basename "$lib"
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ test -z "$libdir" && \
+ func_fatal_error "'$lib' is not a valid libtool archive"
+ func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
+ ;;
+ esac
+ done
+ dlprefiles=$newdlprefiles
+ else
+ newdlfiles=
+ for lib in $dlfiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlfiles " $abs"
+ done
+ dlfiles=$newdlfiles
+ newdlprefiles=
+ for lib in $dlprefiles; do
+ case $lib in
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
+ *) abs=`pwd`"/$lib" ;;
+ esac
+ func_append newdlprefiles " $abs"
+ done
+ dlprefiles=$newdlprefiles
+ fi
+ $RM $output
+ # place dlname in correct position for cygwin
+ # In fact, it would be nice if we could use this code for all target
+ # systems that can't hard-code library paths into their executables
+ # and that have no shared library path variable independent of PATH,
+ # but it turns out we can't easily determine that from inspecting
+ # libtool variables, so we have to hard-code the OSs to which it
+ # applies here; at the moment, that means platforms that use the PE
+ # object format with DLL files. See the long comment at the top of
+ # tests/bindir.at for full details.
+ tdlname=$dlname
+ case $host,$output,$installed,$module,$dlname in
+ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+ # If a -bindir argument was supplied, place the dll there.
+ if test -n "$bindir"; then
+ func_relative_path "$install_libdir" "$bindir"
+ tdlname=$func_relative_path_result/$dlname
+ else
+ # Otherwise fall back on heuristic.
+ tdlname=../bin/$dlname
+ fi
+ ;;
+ esac
+ $ECHO > $output "\
+# $outputname - a libtool library file
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
+#
+# Please DO NOT delete this file!
+# It is necessary for linking the library.
+
+# The name that we can dlopen(3).
+dlname='$tdlname'
+
+# Names of this library.
+library_names='$library_names'
+
+# The name of the static archive.
+old_library='$old_library'
+
+# Linker flags that cannot go in dependency_libs.
+inherited_linker_flags='$new_inherited_linker_flags'
+
+# Libraries that this one depends upon.
+dependency_libs='$dependency_libs'
+
+# Names of additional weak libraries provided by this library
+weak_library_names='$weak_libs'
+
+# Version information for $libname.
+current=$current
+age=$age
+revision=$revision
+
+# Is this an already installed library?
+installed=$installed
+
+# Should we warn about portability when linking against -modules?
+shouldnotlink=$module
+
+# Files to dlopen/dlpreopen
+dlopen='$dlfiles'
+dlpreopen='$dlprefiles'
+
+# Directory that this library needs to be installed in:
+libdir='$install_libdir'"
+ if test no,yes = "$installed,$need_relink"; then
+ $ECHO >> $output "\
+relink_command=\"$relink_command\""
+ fi
+ done
+ }
+
+ # Do a symbolic link so that the libtool archive can be found in
+ # LD_LIBRARY_PATH before the program is installed.
+ func_show_eval '( cd "$output_objdir" && $RM "$outputname" && $LN_S "../$outputname" "$outputname" )' 'exit $?'
+ ;;
+ esac
+ exit $EXIT_SUCCESS
+}
+
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+ func_mode_link ${1+"$@"}
+fi
+
+
+# func_mode_uninstall arg...
+func_mode_uninstall ()
+{
+ $debug_cmd
+
+ RM=$nonopt
+ files=
+ rmforce=false
+ exit_status=0
+
+ # This variable tells wrapper scripts just to set variables rather
+ # than running their programs.
+ libtool_install_magic=$magic
+
+ for arg
+ do
+ case $arg in
+ -f) func_append RM " $arg"; rmforce=: ;;
+ -*) func_append RM " $arg" ;;
+ *) func_append files " $arg" ;;
+ esac
+ done
+
+ test -z "$RM" && \
+ func_fatal_help "you must specify an RM program"
+
+ rmdirs=
+
+ for file in $files; do
+ func_dirname "$file" "" "."
+ dir=$func_dirname_result
+ if test . = "$dir"; then
+ odir=$objdir
+ else
+ odir=$dir/$objdir
+ fi
+ func_basename "$file"
+ name=$func_basename_result
+ test uninstall = "$opt_mode" && odir=$dir
+
+ # Remember odir for removal later, being careful to avoid duplicates
+ if test clean = "$opt_mode"; then
+ case " $rmdirs " in
+ *" $odir "*) ;;
+ *) func_append rmdirs " $odir" ;;
+ esac
+ fi
+
+ # Don't error if the file doesn't exist and rm -f was used.
+ if { test -L "$file"; } >/dev/null 2>&1 ||
+ { test -h "$file"; } >/dev/null 2>&1 ||
+ test -f "$file"; then
+ :
+ elif test -d "$file"; then
+ exit_status=1
+ continue
+ elif $rmforce; then
+ continue
+ fi
+
+ rmfiles=$file
+
+ case $name in
+ *.la)
+ # Possibly a libtool archive, so verify it.
+ if func_lalib_p "$file"; then
+ func_source $dir/$name
+
+ # Delete the libtool libraries and symlinks.
+ for n in $library_names; do
+ func_append rmfiles " $odir/$n"
+ done
+ test -n "$old_library" && func_append rmfiles " $odir/$old_library"
+
+ case $opt_mode in
+ clean)
+ case " $library_names " in
+ *" $dlname "*) ;;
+ *) test -n "$dlname" && func_append rmfiles " $odir/$dlname" ;;
+ esac
+ test -n "$libdir" && func_append rmfiles " $odir/$name $odir/${name}i"
+ ;;
+ uninstall)
+ if test -n "$library_names"; then
+ # Do each command in the postuninstall commands.
+ func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
+ fi
+
+ if test -n "$old_library"; then
+ # Do each command in the old_postuninstall commands.
+ func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
+ fi
+ # FIXME: should reinstall the best remaining shared library.
+ ;;
+ esac
+ fi
+ ;;
+
+ *.lo)
+ # Possibly a libtool object, so verify it.
+ if func_lalib_p "$file"; then
+
+ # Read the .lo file
+ func_source $dir/$name
+
+ # Add PIC object to the list of files to remove.
+ if test -n "$pic_object" && test none != "$pic_object"; then
+ func_append rmfiles " $dir/$pic_object"
+ fi
+
+ # Add non-PIC object to the list of files to remove.
+ if test -n "$non_pic_object" && test none != "$non_pic_object"; then
+ func_append rmfiles " $dir/$non_pic_object"
+ fi
+ fi
+ ;;
+
+ *)
+ if test clean = "$opt_mode"; then
+ noexename=$name
+ case $file in
+ *.exe)
+ func_stripname '' '.exe' "$file"
+ file=$func_stripname_result
+ func_stripname '' '.exe' "$name"
+ noexename=$func_stripname_result
+ # $file with .exe has already been added to rmfiles,
+ # add $file without .exe
+ func_append rmfiles " $file"
+ ;;
+ esac
+ # Do a test to see if this is a libtool program.
+ if func_ltwrapper_p "$file"; then
+ if func_ltwrapper_executable_p "$file"; then
+ func_ltwrapper_scriptname "$file"
+ relink_command=
+ func_source $func_ltwrapper_scriptname_result
+ func_append rmfiles " $func_ltwrapper_scriptname_result"
+ else
+ relink_command=
+ func_source $dir/$noexename
+ fi
+
+ # note $name still contains .exe if it was in $file originally
+ # as does the version of $file that was added into $rmfiles
+ func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+ if test yes = "$fast_install" && test -n "$relink_command"; then
+ func_append rmfiles " $odir/lt-$name"
+ fi
+ if test "X$noexename" != "X$name"; then
+ func_append rmfiles " $odir/lt-$noexename.c"
+ fi
+ fi
+ fi
+ ;;
+ esac
+ func_show_eval "$RM $rmfiles" 'exit_status=1'
+ done
+
+ # Try to remove the $objdir's in the directories where we deleted files
+ for dir in $rmdirs; do
+ if test -d "$dir"; then
+ func_show_eval "rmdir $dir >/dev/null 2>&1"
+ fi
+ done
+
+ exit $exit_status
+}
+
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+ func_mode_uninstall ${1+"$@"}
+fi
+
+test -z "$opt_mode" && {
+ help=$generic_help
+ func_fatal_help "you must specify a MODE"
+}
+
+test -z "$exec_cmd" && \
+ func_fatal_help "invalid operation mode '$opt_mode'"
+
+if test -n "$exec_cmd"; then
+ eval exec "$exec_cmd"
+ exit $EXIT_FAILURE
+fi
+
+exit $exit_status
+
+
+# The TAGs below are defined such that we never get into a situation
+# where we disable both kinds of libraries. Given conflicting
+# choices, we go for a static library, that is the most portable,
+# since we can't tell whether shared libraries were disabled because
+# the user asked for that or because the platform doesn't support
+# them. This is particularly important on AIX, because we don't
+# support having both static and shared libraries enabled at the same
+# time on that platform, so we default to a shared-only configuration.
+# If a disable-shared tag is given, we'll fallback to a static-only
+# configuration. But we'll never go from static-only to shared-only.
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-shared
+build_libtool_libs=no
+build_old_libs=yes
+# ### END LIBTOOL TAG CONFIG: disable-shared
+
+# ### BEGIN LIBTOOL TAG CONFIG: disable-static
+build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac`
+# ### END LIBTOOL TAG CONFIG: disable-static
+
+# Local Variables:
+# mode:shell-script
+# sh-indentation:2
+# End:
diff --git a/mips/filter_msa_intrinsics.c b/mips/filter_msa_intrinsics.c
index 943bb3d..5705628 100644
--- a/mips/filter_msa_intrinsics.c
+++ b/mips/filter_msa_intrinsics.c
@@ -366,8 +366,8 @@
void png_read_filter_row_up_msa(png_row_infop row_info, png_bytep row,
png_const_bytep prev_row)
{
- png_size_t i, cnt, cnt16, cnt32;
- png_size_t istop = row_info->rowbytes;
+ size_t i, cnt, cnt16, cnt32;
+ size_t istop = row_info->rowbytes;
png_bytep rp = row;
png_const_bytep pp = prev_row;
v16u8 src0, src1, src2, src3, src4, src5, src6, src7;
@@ -457,8 +457,8 @@
void png_read_filter_row_sub4_msa(png_row_infop row_info, png_bytep row,
png_const_bytep prev_row)
{
- png_size_t count;
- png_size_t istop = row_info->rowbytes;
+ size_t count;
+ size_t istop = row_info->rowbytes;
png_bytep src = row;
png_bytep nxt = row + 4;
int32_t inp0;
@@ -496,8 +496,8 @@
void png_read_filter_row_sub3_msa(png_row_infop row_info, png_bytep row,
png_const_bytep prev_row)
{
- png_size_t count;
- png_size_t istop = row_info->rowbytes;
+ size_t count;
+ size_t istop = row_info->rowbytes;
png_bytep src = row;
png_bytep nxt = row + 3;
int64_t out0;
@@ -541,11 +541,11 @@
void png_read_filter_row_avg4_msa(png_row_infop row_info, png_bytep row,
png_const_bytep prev_row)
{
- png_size_t i;
+ size_t i;
png_bytep src = row;
png_bytep nxt = row;
png_const_bytep pp = prev_row;
- png_size_t istop = row_info->rowbytes - 4;
+ size_t istop = row_info->rowbytes - 4;
int32_t inp0, inp1, out0;
v16u8 src0, src1, src2, src3, src4, src5, src6, src7, src8, src9, dst0, dst1;
v16u8 zero = { 0 };
@@ -592,11 +592,11 @@
void png_read_filter_row_avg3_msa(png_row_infop row_info, png_bytep row,
png_const_bytep prev_row)
{
- png_size_t i;
+ size_t i;
png_bytep src = row;
png_bytep nxt = row;
png_const_bytep pp = prev_row;
- png_size_t istop = row_info->rowbytes - 3;
+ size_t istop = row_info->rowbytes - 3;
int64_t out0;
int32_t inp0, inp1, out1;
int16_t out2;
diff --git a/missing b/missing
new file mode 100755
index 0000000..625aeb1
--- /dev/null
+++ b/missing
@@ -0,0 +1,215 @@
+#! /bin/sh
+# Common wrapper for a few potentially missing GNU programs.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
+# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+fi
+
+case $1 in
+
+ --is-lightweight)
+ # Used by our autoconf macros to check whether the available missing
+ # script is modern enough.
+ exit 0
+ ;;
+
+ --run)
+ # Back-compat with the calling convention used by older automake.
+ shift
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
+to PROGRAM being missing or too old.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+
+Supported PROGRAM values:
+ aclocal autoconf autoheader autom4te automake makeinfo
+ bison yacc flex lex help2man
+
+Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
+'g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: unknown '$1' option"
+ echo 1>&2 "Try '$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# Run the given program, remember its exit status.
+"$@"; st=$?
+
+# If it succeeded, we are done.
+test $st -eq 0 && exit 0
+
+# Also exit now if we it failed (or wasn't found), and '--version' was
+# passed; such an option is passed most likely to detect whether the
+# program is present and works.
+case $2 in --version|--help) exit $st;; esac
+
+# Exit code 63 means version mismatch. This often happens when the user
+# tries to use an ancient version of a tool on a file that requires a
+# minimum version.
+if test $st -eq 63; then
+ msg="probably too old"
+elif test $st -eq 127; then
+ # Program was missing.
+ msg="missing on your system"
+else
+ # Program was found and executed, but failed. Give up.
+ exit $st
+fi
+
+perl_URL=https://www.perl.org/
+flex_URL=https://github.com/westes/flex
+gnu_software_URL=https://www.gnu.org/software
+
+program_details ()
+{
+ case $1 in
+ aclocal|automake)
+ echo "The '$1' program is part of the GNU Automake package:"
+ echo "<$gnu_software_URL/automake>"
+ echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/autoconf>"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ autoconf|autom4te|autoheader)
+ echo "The '$1' program is part of the GNU Autoconf package:"
+ echo "<$gnu_software_URL/autoconf/>"
+ echo "It also requires GNU m4 and Perl in order to run:"
+ echo "<$gnu_software_URL/m4/>"
+ echo "<$perl_URL>"
+ ;;
+ esac
+}
+
+give_advice ()
+{
+ # Normalize program name to check for.
+ normalized_program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+ printf '%s\n' "'$1' is $msg."
+
+ configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
+ case $normalized_program in
+ autoconf*)
+ echo "You should only need it if you modified 'configure.ac',"
+ echo "or m4 files included by it."
+ program_details 'autoconf'
+ ;;
+ autoheader*)
+ echo "You should only need it if you modified 'acconfig.h' or"
+ echo "$configure_deps."
+ program_details 'autoheader'
+ ;;
+ automake*)
+ echo "You should only need it if you modified 'Makefile.am' or"
+ echo "$configure_deps."
+ program_details 'automake'
+ ;;
+ aclocal*)
+ echo "You should only need it if you modified 'acinclude.m4' or"
+ echo "$configure_deps."
+ program_details 'aclocal'
+ ;;
+ autom4te*)
+ echo "You might have modified some maintainer files that require"
+ echo "the 'autom4te' program to be rebuilt."
+ program_details 'autom4te'
+ ;;
+ bison*|yacc*)
+ echo "You should only need it if you modified a '.y' file."
+ echo "You may want to install the GNU Bison package:"
+ echo "<$gnu_software_URL/bison/>"
+ ;;
+ lex*|flex*)
+ echo "You should only need it if you modified a '.l' file."
+ echo "You may want to install the Fast Lexical Analyzer package:"
+ echo "<$flex_URL>"
+ ;;
+ help2man*)
+ echo "You should only need it if you modified a dependency" \
+ "of a man page."
+ echo "You may want to install the GNU Help2man package:"
+ echo "<$gnu_software_URL/help2man/>"
+ ;;
+ makeinfo*)
+ echo "You should only need it if you modified a '.texi' file, or"
+ echo "any other file indirectly affecting the aspect of the manual."
+ echo "You might want to install the Texinfo package:"
+ echo "<$gnu_software_URL/texinfo/>"
+ echo "The spurious makeinfo call might also be the consequence of"
+ echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
+ echo "want to install GNU make:"
+ echo "<$gnu_software_URL/make/>"
+ ;;
+ *)
+ echo "You might have modified some files without having the proper"
+ echo "tools for further handling them. Check the 'README' file, it"
+ echo "often tells you about the needed prerequisites for installing"
+ echo "this package. You may also peek at any GNU archive site, in"
+ echo "case some other package contains this missing '$1' program."
+ ;;
+ esac
+}
+
+give_advice "$1" | sed -e '1s/^/WARNING: /' \
+ -e '2,$s/^/ /' >&2
+
+# Propagate the correct exit status (expected to be 127 for a program
+# not found, 63 for a program that failed due to version mismatch).
+exit $st
+
+# Local variables:
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
diff --git a/png.c b/png.c
index ff02c56..a25afeb 100644
--- a/png.c
+++ b/png.c
@@ -1,8 +1,8 @@
/* png.c - location for general purpose libpng functions
*
- * Last changed in libpng 1.6.33 [September 28, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -14,7 +14,7 @@
#include "pngpriv.h"
/* Generate a compiler error if there is an old png.h in the search path. */
-typedef png_libpng_version_1_6_34 Your_png_h_is_not_version_1_6_34;
+typedef png_libpng_version_1_6_35 Your_png_h_is_not_version_1_6_35;
#ifdef __GNUC__
/* The version tests may need to be added to, but the problem warning has
@@ -71,7 +71,7 @@
* PNG signature (this is the same behavior as strcmp, memcmp, etc).
*/
int PNGAPI
-png_sig_cmp(png_const_bytep sig, png_size_t start, png_size_t num_to_check)
+png_sig_cmp(png_const_bytep sig, size_t start, size_t num_to_check)
{
png_byte png_signature[8] = {137, 80, 78, 71, 13, 10, 26, 10};
@@ -136,7 +136,7 @@
* trouble of calculating it.
*/
void /* PRIVATE */
-png_calculate_crc(png_structrp png_ptr, png_const_bytep ptr, png_size_t length)
+png_calculate_crc(png_structrp png_ptr, png_const_bytep ptr, size_t length)
{
int need_crc = 1;
@@ -421,7 +421,7 @@
* those cases where it does anything other than a memset.
*/
PNG_FUNCTION(void,PNGAPI
-png_info_init_3,(png_infopp ptr_ptr, png_size_t png_info_struct_size),
+png_info_init_3,(png_infopp ptr_ptr, size_t png_info_struct_size),
PNG_DEPRECATED)
{
png_inforp info_ptr = *ptr_ptr;
@@ -816,15 +816,15 @@
#else
# ifdef __STDC__
return PNG_STRING_NEWLINE \
- "libpng version 1.6.34 - September 29, 2017" PNG_STRING_NEWLINE \
- "Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson" \
+ "libpng version 1.6.35 - July 15, 2018" PNG_STRING_NEWLINE \
+ "Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson" \
PNG_STRING_NEWLINE \
"Copyright (c) 1996-1997 Andreas Dilger" PNG_STRING_NEWLINE \
"Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc." \
PNG_STRING_NEWLINE;
# else
- return "libpng version 1.6.34 - September 29, 2017\
- Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson\
+ return "libpng version 1.6.35 - July 15, 2018\
+ Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson\
Copyright (c) 1996-1997 Andreas Dilger\
Copyright (c) 1995-1996 Guy Eric Schalnat, Group 42, Inc.";
# endif
@@ -942,7 +942,7 @@
/* The code is the fifth byte after each four byte string. Historically this
* code was always searched from the end of the list, this is no longer
- * necessary because the 'set' routine handles duplicate entries correcty.
+ * necessary because the 'set' routine handles duplicate entries correctly.
*/
do /* num_chunk_list > 0, so at least one */
{
@@ -2067,7 +2067,7 @@
*/
/* Data checks (could be skipped). These checks must be independent of the
- * version number; however, the version number doesn't accomodate changes in
+ * version number; however, the version number doesn't accommodate changes in
* the header fields (just the known tags and the interpretation of the
* data.)
*/
@@ -2707,7 +2707,7 @@
#if defined(PNG_sCAL_SUPPORTED) || defined(PNG_pCAL_SUPPORTED)
/* ASCII to fp functions */
-/* Check an ASCII formated floating point value, see the more detailed
+/* Check an ASCII formatted floating point value, see the more detailed
* comments in pngpriv.h
*/
/* The following is used internally to preserve the sticky flags */
@@ -2715,11 +2715,11 @@
#define png_fp_set(state, value) ((state) = (value) | ((state) & PNG_FP_STICKY))
int /* PRIVATE */
-png_check_fp_number(png_const_charp string, png_size_t size, int *statep,
+png_check_fp_number(png_const_charp string, size_t size, int *statep,
png_size_tp whereami)
{
int state = *statep;
- png_size_t i = *whereami;
+ size_t i = *whereami;
while (i < size)
{
@@ -2842,10 +2842,10 @@
/* The same but for a complete string. */
int
-png_check_fp_string(png_const_charp string, png_size_t size)
+png_check_fp_string(png_const_charp string, size_t size)
{
int state=0;
- png_size_t char_index=0;
+ size_t char_index=0;
if (png_check_fp_number(string, size, &state, &char_index) != 0 &&
(char_index == size || string[char_index] == 0))
@@ -2906,7 +2906,7 @@
#pragma GCC diagnostic warning "-Wstrict-overflow=2"
#endif /* GCC_STRICT_OVERFLOW */
void /* PRIVATE */
-png_ascii_from_fp(png_const_structrp png_ptr, png_charp ascii, png_size_t size,
+png_ascii_from_fp(png_const_structrp png_ptr, png_charp ascii, size_t size,
double fp, unsigned int precision)
{
/* We use standard functions from math.h, but not printf because
@@ -3237,7 +3237,7 @@
*/
void /* PRIVATE */
png_ascii_from_fixed(png_const_structrp png_ptr, png_charp ascii,
- png_size_t size, png_fixed_point fp)
+ size_t size, png_fixed_point fp)
{
/* Require space for 10 decimal digits, a decimal point, a minus sign and a
* trailing \0, 13 characters:
@@ -4344,7 +4344,7 @@
png_uint_32 setting = (2U + (onoff != 0)) << option;
png_uint_32 current = png_ptr->options;
- png_ptr->options = (png_uint_32)(((current & ~mask) | setting) & 0xff);
+ png_ptr->options = (png_uint_32)((current & ~mask) | setting);
return (int)(current & mask) >> option;
}
diff --git a/png.h b/png.h
index 4c873f5..19e464c 100644
--- a/png.h
+++ b/png.h
@@ -1,9 +1,9 @@
/* png.h - header file for PNG reference library
*
- * libpng version 1.6.34, September 29, 2017
+ * libpng version 1.6.35, July 15, 2018
*
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -12,7 +12,7 @@
* Authors and maintainers:
* libpng versions 0.71, May 1995, through 0.88, January 1996: Guy Schalnat
* libpng versions 0.89, June 1996, through 0.96, May 1997: Andreas Dilger
- * libpng versions 0.97, January 1998, through 1.6.34, September 29, 2017:
+ * libpng versions 0.97, January 1998, through 1.6.35, July 15, 2018:
* Glenn Randers-Pehrson.
* See also "Contributing Authors", below.
*/
@@ -25,8 +25,8 @@
*
* This code is released under the libpng license.
*
- * libpng versions 1.0.7, July 1, 2000 through 1.6.34, September 29, 2017 are
- * Copyright (c) 2000-2002, 2004, 2006-2017 Glenn Randers-Pehrson, are
+ * libpng versions 1.0.7, July 1, 2000 through 1.6.35, July 15, 2018 are
+ * Copyright (c) 2000-2002, 2004, 2006-2018 Glenn Randers-Pehrson, are
* derived from libpng-1.0.6, and are distributed according to the same
* disclaimer and license as libpng-1.0.6 with the following individuals
* added to the list of Contributing Authors:
@@ -213,7 +213,7 @@
* ...
* 1.5.30 15 10527 15.so.15.30[.0]
* ...
- * 1.6.34 16 10633 16.so.16.34[.0]
+ * 1.6.35 16 10635 16.so.16.35[.0]
*
* Henceforth the source version will match the shared-library major
* and minor numbers; the shared-library major version number will be
@@ -241,13 +241,13 @@
* Y2K compliance in libpng:
* =========================
*
- * September 29, 2017
+ * July 15, 2018
*
* Since the PNG Development group is an ad-hoc body, we can't make
* an official declaration.
*
* This is your unofficial assurance that libpng from version 0.71 and
- * upward through 1.6.34 are Y2K compliant. It is my belief that
+ * upward through 1.6.35 are Y2K compliant. It is my belief that
* earlier versions were also Y2K compliant.
*
* Libpng only has two year fields. One is a 2-byte unsigned integer
@@ -309,8 +309,8 @@
*/
/* Version information for png.h - this should match the version in png.c */
-#define PNG_LIBPNG_VER_STRING "1.6.34"
-#define PNG_HEADER_VERSION_STRING " libpng version 1.6.34 - September 29, 2017\n"
+#define PNG_LIBPNG_VER_STRING "1.6.35"
+#define PNG_HEADER_VERSION_STRING " libpng version 1.6.35 - July 15, 2018\n"
#define PNG_LIBPNG_VER_SONUM 16
#define PNG_LIBPNG_VER_DLLNUM 16
@@ -318,13 +318,13 @@
/* These should match the first 3 components of PNG_LIBPNG_VER_STRING: */
#define PNG_LIBPNG_VER_MAJOR 1
#define PNG_LIBPNG_VER_MINOR 6
-#define PNG_LIBPNG_VER_RELEASE 34
+#define PNG_LIBPNG_VER_RELEASE 35
/* This should match the numeric part of the final component of
* PNG_LIBPNG_VER_STRING, omitting any leading zero:
*/
-#define PNG_LIBPNG_VER_BUILD 0
+#define PNG_LIBPNG_VER_BUILD 02
/* Release Status */
#define PNG_LIBPNG_BUILD_ALPHA 1
@@ -341,7 +341,7 @@
#define PNG_LIBPNG_BUILD_SPECIAL 32 /* Cannot be OR'ed with
PNG_LIBPNG_BUILD_PRIVATE */
-#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_STABLE
+#define PNG_LIBPNG_BUILD_BASE_TYPE PNG_LIBPNG_BUILD_BETA
/* Careful here. At one time, Guy wanted to use 082, but that would be octal.
* We must not include leading zeros.
@@ -349,7 +349,7 @@
* version 1.0.0 was mis-numbered 100 instead of 10000). From
* version 1.0.1 it's xxyyzz, where x=major, y=minor, z=release
*/
-#define PNG_LIBPNG_VER 10634 /* 1.6.34 */
+#define PNG_LIBPNG_VER 10635 /* 1.6.35 */
/* Library configuration: these options cannot be changed after
* the library has been built.
@@ -459,7 +459,7 @@
/* This triggers a compiler error in png.c, if png.c and png.h
* do not agree upon the version number.
*/
-typedef char* png_libpng_version_1_6_34;
+typedef char* png_libpng_version_1_6_35;
/* Basic control structions. Read libpng-manual.txt or libpng.3 for more info.
*
@@ -600,8 +600,8 @@
png_charp key; /* keyword, 1-79 character description of "text" */
png_charp text; /* comment, may be an empty string (ie "")
or a NULL pointer */
- png_size_t text_length; /* length of the text string */
- png_size_t itxt_length; /* length of the itxt string */
+ size_t text_length; /* length of the text string */
+ size_t itxt_length; /* length of the itxt string */
png_charp lang; /* language code, 0-79 characters
or a NULL pointer */
png_charp lang_key; /* keyword translated UTF-8 string, 0 or more
@@ -654,7 +654,7 @@
{
png_byte name[5]; /* Textual chunk name with '\0' terminator */
png_byte *data; /* Data, should not be modified on read! */
- png_size_t size;
+ size_t size;
/* On write 'location' must be set using the flag values listed below.
* Notice that on read it is set by libpng however the values stored have
@@ -679,7 +679,7 @@
/* Maximum positive integer used in PNG is (2^31)-1 */
#define PNG_UINT_31_MAX ((png_uint_32)0x7fffffffL)
#define PNG_UINT_32_MAX ((png_uint_32)(-1))
-#define PNG_SIZE_MAX ((png_size_t)(-1))
+#define PNG_SIZE_MAX ((size_t)(-1))
/* These are constants for fixed point values encoded in the
* PNG specification manner (x100000)
@@ -785,7 +785,7 @@
typedef struct png_row_info_struct
{
png_uint_32 width; /* width of row */
- png_size_t rowbytes; /* number of bytes in row */
+ size_t rowbytes; /* number of bytes in row */
png_byte color_type; /* color type of row */
png_byte bit_depth; /* bit depth of row */
png_byte channels; /* number of channels (1, 2, 3, or 4) */
@@ -804,7 +804,7 @@
* expected to return the read data in the buffer.
*/
typedef PNG_CALLBACK(void, *png_error_ptr, (png_structp, png_const_charp));
-typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, png_size_t));
+typedef PNG_CALLBACK(void, *png_rw_ptr, (png_structp, png_bytep, size_t));
typedef PNG_CALLBACK(void, *png_flush_ptr, (png_structp));
typedef PNG_CALLBACK(void, *png_read_status_ptr, (png_structp, png_uint_32,
int));
@@ -941,8 +941,8 @@
* signature, and non-zero otherwise. Having num_to_check == 0 or
* start > 7 will always fail (ie return non-zero).
*/
-PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, png_size_t start,
- png_size_t num_to_check));
+PNG_EXPORT(3, int, png_sig_cmp, (png_const_bytep sig, size_t start,
+ size_t num_to_check));
/* Simple signature checking function. This is the same as calling
* png_check_sig(sig, n) := !png_sig_cmp(sig, 0, n).
@@ -961,11 +961,11 @@
png_error_ptr warn_fn),
PNG_ALLOCATED);
-PNG_EXPORT(6, png_size_t, png_get_compression_buffer_size,
+PNG_EXPORT(6, size_t, png_get_compression_buffer_size,
(png_const_structrp png_ptr));
PNG_EXPORT(7, void, png_set_compression_buffer_size, (png_structrp png_ptr,
- png_size_t size));
+ size_t size));
/* Moved from pngconf.h in 1.4.0 and modified to ensure setjmp/longjmp
* match up.
@@ -1018,7 +1018,7 @@
/* Write a PNG chunk - size, type, (optional) data, CRC. */
PNG_EXPORT(14, void, png_write_chunk, (png_structrp png_ptr, png_const_bytep
- chunk_name, png_const_bytep data, png_size_t length));
+ chunk_name, png_const_bytep data, size_t length));
/* Write the start of a PNG chunk - length and chunk name. */
PNG_EXPORT(15, void, png_write_chunk_start, (png_structrp png_ptr,
@@ -1026,7 +1026,7 @@
/* Write the data of a PNG chunk started with png_write_chunk_start(). */
PNG_EXPORT(16, void, png_write_chunk_data, (png_structrp png_ptr,
- png_const_bytep data, png_size_t length));
+ png_const_bytep data, size_t length));
/* Finish a chunk started with png_write_chunk_start() (includes CRC). */
PNG_EXPORT(17, void, png_write_chunk_end, (png_structrp png_ptr));
@@ -1040,7 +1040,7 @@
* the API will be removed in the future.
*/
PNG_EXPORTA(19, void, png_info_init_3, (png_infopp info_ptr,
- png_size_t png_info_struct_size), PNG_DEPRECATED);
+ size_t png_info_struct_size), PNG_DEPRECATED);
/* Writes all the PNG information before the image. */
PNG_EXPORT(20, void, png_write_info_before_PLTE,
@@ -1137,7 +1137,7 @@
* corresponding composited pixel, and the color channels are unassociated
* (not premultiplied). The gamma encoded color channels must be scaled
* according to the contribution and to do this it is necessary to undo
- * the encoding, scale the color values, perform the composition and reencode
+ * the encoding, scale the color values, perform the composition and re-encode
* the values. This is the 'PNG' mode.
*
* The alternative is to 'associate' the alpha with the color information by
@@ -1193,7 +1193,7 @@
*
* png_set_alpha_mode(pp, PNG_ALPHA_PNG, PNG_GAMMA_MAC);
* In this case the output is assumed to be something like an sRGB conformant
- * display preceeded by a power-law lookup table of power 1.45. This is how
+ * display preceded by a power-law lookup table of power 1.45. This is how
* early Mac systems behaved.
*
* png_set_alpha_mode(pp, PNG_ALPHA_STANDARD, PNG_GAMMA_LINEAR);
@@ -1240,7 +1240,7 @@
*
* When the default gamma of PNG files doesn't match the output gamma.
* If you have PNG files with no gamma information png_set_alpha_mode allows
- * you to provide a default gamma, but it also sets the ouput gamma to the
+ * you to provide a default gamma, but it also sets the output gamma to the
* matching value. If you know your PNG files have a gamma that doesn't
* match the output you can take advantage of the fact that
* png_set_alpha_mode always sets the output gamma but only sets the PNG
@@ -1691,7 +1691,7 @@
* chunk will cause an error at this point unless it is to be saved.
* positive: The chunk was handled, libpng will ignore/discard it.
*
- * See "INTERACTION WTIH USER CHUNK CALLBACKS" below for important notes about
+ * See "INTERACTION WITH USER CHUNK CALLBACKS" below for important notes about
* how this behavior will change in libpng 1.7
*/
PNG_EXPORT(88, void, png_set_read_user_chunk_fn, (png_structrp png_ptr,
@@ -1716,7 +1716,7 @@
/* Function to be called when data becomes available */
PNG_EXPORT(92, void, png_process_data, (png_structrp png_ptr,
- png_inforp info_ptr, png_bytep buffer, png_size_t buffer_size));
+ png_inforp info_ptr, png_bytep buffer, size_t buffer_size));
/* A function which may be called *only* within png_process_data to stop the
* processing of any more data. The function returns the number of bytes
@@ -1725,7 +1725,7 @@
* 'save' is set to true the routine will first save all the pending data and
* will always return 0.
*/
-PNG_EXPORT(219, png_size_t, png_process_data_pause, (png_structrp, int save));
+PNG_EXPORT(219, size_t, png_process_data_pause, (png_structrp, int save));
/* A function which may be called *only* outside (after) a call to
* png_process_data. It returns the number of bytes of data to skip in the
@@ -1870,7 +1870,7 @@
png_const_inforp info_ptr, png_uint_32 flag));
/* Returns number of bytes needed to hold a transformed row. */
-PNG_EXPORT(111, png_size_t, png_get_rowbytes, (png_const_structrp png_ptr,
+PNG_EXPORT(111, size_t, png_get_rowbytes, (png_const_structrp png_ptr,
png_const_inforp info_ptr));
#ifdef PNG_INFO_IMAGE_SUPPORTED
@@ -2239,7 +2239,7 @@
* to specifying "NEVER", however when "AS_DEFAULT" is used for specific chunks
* it simply resets the behavior to the libpng default.
*
- * INTERACTION WTIH USER CHUNK CALLBACKS:
+ * INTERACTION WITH USER CHUNK CALLBACKS:
* The per-chunk handling is always used when there is a png_user_chunk_ptr
* callback and the callback returns 0; the chunk is then always stored *unless*
* it is critical and the per-chunk setting is other than ALWAYS. Notice that
@@ -2658,7 +2658,7 @@
* The simplified API hides the details of both libpng and the PNG file format
* itself. It allows PNG files to be read into a very limited number of
* in-memory bitmap formats or to be written from the same formats. If these
- * formats do not accomodate your needs then you can, and should, use the more
+ * formats do not accommodate your needs then you can, and should, use the more
* sophisticated APIs above - these support a wide variety of in-memory formats
* and a wide variety of sophisticated transformations to those formats as well
* as a wide variety of APIs to manipulate ancillary information.
@@ -3020,7 +3020,7 @@
#endif /* STDIO */
PNG_EXPORT(236, int, png_image_begin_read_from_memory, (png_imagep image,
- png_const_voidp memory, png_size_t size));
+ png_const_voidp memory, size_t size));
/* The PNG header is read from the given memory buffer. */
PNG_EXPORT(237, int, png_image_finish_read, (png_imagep image,
@@ -3133,7 +3133,7 @@
* than or equal to the original value.
*
* If the function returns false and *memory_bytes was not changed an error
- * occured during write. If *memory_bytes was changed, or is not 0 if
+ * occurred during write. If *memory_bytes was changed, or is not 0 if
* 'memory' was NULL, the write would have succeeded but for the memory
* buffer being too small. *memory_bytes contains the required number of
* bytes and will be bigger that the original value.
@@ -3217,7 +3217,7 @@
* option and 'onoff' is 0 (off) or non-0 (on). The value returned is given
* by the PNG_OPTION_ defines below.
*
- * HARDWARE: normally hardware capabilites, such as the Intel SSE instructions,
+ * HARDWARE: normally hardware capabilities, such as the Intel SSE instructions,
* are detected at run time, however sometimes it may be impossible
* to do this in user mode, in which case it is necessary to discover
* the capabilities in an OS specific way. Such capabilities are
diff --git a/pngconf.h b/pngconf.h
index d13b13e..a4646ba 100644
--- a/pngconf.h
+++ b/pngconf.h
@@ -1,9 +1,9 @@
/* pngconf.h - machine configurable file for libpng
*
- * libpng version 1.6.34, September 29, 2017
+ * libpng version 1.6.35, July 15, 2018
*
- * Copyright (c) 1998-2002,2004,2006-2016 Glenn Randers-Pehrson
+ * Copyright (c) 1998-2002,2004,2006-2016,2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -127,7 +127,7 @@
*
* These cases only differ if the operating system does not use the C
* calling convention, at present this just means the above cases
- * (x86 DOS/Windows sytems) and, even then, this does not apply to
+ * (x86 DOS/Windows systems) and, even then, this does not apply to
* Cygwin running on those systems.
*
* Note that the value must be defined in pnglibconf.h so that what
@@ -515,8 +515,10 @@
# error "libpng requires an unsigned 32-bit (or more) type"
#endif
-/* Prior to 1.6.0 it was possible to disable the use of size_t, 1.6.0, however,
- * requires an ISOC90 compiler and relies on consistent behavior of sizeof.
+/* Prior to 1.6.0, it was possible to disable the use of size_t and ptrdiff_t.
+ * From 1.6.0 onwards, an ISO C90 compiler, as well as a standard-compliant
+ * behavior of sizeof and ptrdiff_t are required.
+ * The legacy typedefs are provided here for backwards compatibility.
*/
typedef size_t png_size_t;
typedef ptrdiff_t png_ptrdiff_t;
@@ -537,13 +539,12 @@
# endif
#endif
-/* png_alloc_size_t is guaranteed to be no smaller than png_size_t, and no
- * smaller than png_uint_32. Casts from png_size_t or png_uint_32 to
- * png_alloc_size_t are not necessary; in fact, it is recommended not to use
- * them at all so that the compiler can complain when something turns out to be
- * problematic.
+/* png_alloc_size_t is guaranteed to be no smaller than size_t, and no smaller
+ * than png_uint_32. Casts from size_t or png_uint_32 to png_alloc_size_t are
+ * not necessary; in fact, it is recommended not to use them at all, so that
+ * the compiler can complain when something turns out to be problematic.
*
- * Casts in the other direction (from png_alloc_size_t to png_size_t or
+ * Casts in the other direction (from png_alloc_size_t to size_t or
* png_uint_32) should be explicitly applied; however, we do not expect to
* encounter practical situations that require such conversions.
*
@@ -553,7 +554,7 @@
#ifdef PNG_SMALL_SIZE_T
typedef png_uint_32 png_alloc_size_t;
#else
- typedef png_size_t png_alloc_size_t;
+ typedef size_t png_alloc_size_t;
#endif
/* Prior to 1.6.0 libpng offered limited support for Microsoft C compiler
@@ -589,8 +590,8 @@
typedef const char * png_const_charp;
typedef png_fixed_point * png_fixed_point_p;
typedef const png_fixed_point * png_const_fixed_point_p;
-typedef png_size_t * png_size_tp;
-typedef const png_size_t * png_const_size_tp;
+typedef size_t * png_size_tp;
+typedef const size_t * png_const_size_tp;
#ifdef PNG_STDIO_SUPPORTED
typedef FILE * png_FILE_p;
diff --git a/pngget.c b/pngget.c
index 26e9fb1..2325508 100644
--- a/pngget.c
+++ b/pngget.c
@@ -1,8 +1,8 @@
/* pngget.c - retrieval of values from info struct
*
- * Last changed in libpng 1.6.32 [August 24, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -26,7 +26,7 @@
return(0);
}
-png_size_t PNGAPI
+size_t PNGAPI
png_get_rowbytes(png_const_structrp png_ptr, png_const_inforp info_ptr)
{
if (png_ptr != NULL && info_ptr != NULL)
@@ -367,7 +367,7 @@
static png_fixed_point
png_fixed_inches_from_microns(png_const_structrp png_ptr, png_int_32 microns)
{
- /* Convert from metres * 1,000,000 to inches * 100,000, meters to
+ /* Convert from meters * 1,000,000 to inches * 100,000, meters to
* inches is simply *(100/2.54), so we want *(10/2.54) == 500/127.
* Notice that this can overflow - a warning is output and 0 is
* returned.
@@ -741,8 +741,7 @@
if (png_ptr != NULL && info_ptr != NULL &&
(info_ptr->valid & PNG_INFO_iCCP) != 0 &&
- name != NULL && compression_type != NULL && profile != NULL &&
- proflen != NULL)
+ name != NULL && profile != NULL && proflen != NULL)
{
*name = info_ptr->iccp_name;
*profile = info_ptr->iccp_profile;
@@ -750,11 +749,13 @@
/* This is somewhat irrelevant since the profile data returned has
* actually been uncompressed.
*/
- *compression_type = PNG_COMPRESSION_TYPE_BASE;
+ if (compression_type != NULL)
+ *compression_type = PNG_COMPRESSION_TYPE_BASE;
return (PNG_INFO_iCCP);
}
return (0);
+
}
#endif
@@ -1164,7 +1165,7 @@
}
#endif
-png_size_t PNGAPI
+size_t PNGAPI
png_get_compression_buffer_size(png_const_structrp png_ptr)
{
if (png_ptr == NULL)
diff --git a/pnginfo.h b/pnginfo.h
index d5f6149..2fcf868 100644
--- a/pnginfo.h
+++ b/pnginfo.h
@@ -1,8 +1,8 @@
/* pnginfo.h - header file for PNG reference library
*
- * Last changed in libpng 1.6.1 [March 28, 2013]
- * Copyright (c) 1998-2002,2004,2006-2013 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2013,2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -55,10 +55,10 @@
struct png_info_def
{
/* The following are necessary for every PNG file */
- png_uint_32 width; /* width of image in pixels (from IHDR) */
- png_uint_32 height; /* height of image in pixels (from IHDR) */
- png_uint_32 valid; /* valid chunk data (see PNG_INFO_ below) */
- png_size_t rowbytes; /* bytes needed to hold an untransformed row */
+ png_uint_32 width; /* width of image in pixels (from IHDR) */
+ png_uint_32 height; /* height of image in pixels (from IHDR) */
+ png_uint_32 valid; /* valid chunk data (see PNG_INFO_ below) */
+ size_t rowbytes; /* bytes needed to hold an untransformed row */
png_colorp palette; /* array of color values (valid & PNG_INFO_PLTE) */
png_uint_16 num_palette; /* number of color entries in "palette" (PLTE) */
png_uint_16 num_trans; /* number of transparent palette color (tRNS) */
@@ -247,7 +247,7 @@
/* The sCAL chunk describes the actual physical dimensions of the
* subject matter of the graphic. The chunk contains a unit specification
* a byte value, and two ASCII strings representing floating-point
- * values. The values are width and height corresponsing to one pixel
+ * values. The values are width and height corresponding to one pixel
* in the image. Data values are valid if (valid & PNG_INFO_sCAL) is
* non-zero.
*/
diff --git a/pngpread.c b/pngpread.c
index fbe361d..c4ba51c 100644
--- a/pngpread.c
+++ b/pngpread.c
@@ -1,8 +1,8 @@
/* pngpread.c - read a png file in push mode
*
- * Last changed in libpng 1.6.32 [August 24, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -34,7 +34,7 @@
void PNGAPI
png_process_data(png_structrp png_ptr, png_inforp info_ptr,
- png_bytep buffer, png_size_t buffer_size)
+ png_bytep buffer, size_t buffer_size)
{
if (png_ptr == NULL || info_ptr == NULL)
return;
@@ -47,7 +47,7 @@
}
}
-png_size_t PNGAPI
+size_t PNGAPI
png_process_data_pause(png_structrp png_ptr, int save)
{
if (png_ptr != NULL)
@@ -60,7 +60,7 @@
else
{
/* This includes any pending saved bytes: */
- png_size_t remaining = png_ptr->buffer_size;
+ size_t remaining = png_ptr->buffer_size;
png_ptr->buffer_size = 0;
/* So subtract the saved buffer size, unless all the data
@@ -133,8 +133,8 @@
void /* PRIVATE */
png_push_read_sig(png_structrp png_ptr, png_inforp info_ptr)
{
- png_size_t num_checked = png_ptr->sig_bytes, /* SAFE, does not exceed 8 */
- num_to_check = 8 - num_checked;
+ size_t num_checked = png_ptr->sig_bytes; /* SAFE, does not exceed 8 */
+ size_t num_to_check = 8 - num_checked;
if (png_ptr->buffer_size < num_to_check)
{
@@ -418,7 +418,7 @@
}
void PNGCBAPI
-png_push_fill_buffer(png_structp png_ptr, png_bytep buffer, png_size_t length)
+png_push_fill_buffer(png_structp png_ptr, png_bytep buffer, size_t length)
{
png_bytep ptr;
@@ -428,7 +428,7 @@
ptr = buffer;
if (png_ptr->save_buffer_size != 0)
{
- png_size_t save_size;
+ size_t save_size;
if (length < png_ptr->save_buffer_size)
save_size = length;
@@ -445,7 +445,7 @@
}
if (length != 0 && png_ptr->current_buffer_size != 0)
{
- png_size_t save_size;
+ size_t save_size;
if (length < png_ptr->current_buffer_size)
save_size = length;
@@ -467,7 +467,7 @@
{
if (png_ptr->save_buffer_ptr != png_ptr->save_buffer)
{
- png_size_t i, istop;
+ size_t i, istop;
png_bytep sp;
png_bytep dp;
@@ -482,7 +482,7 @@
if (png_ptr->save_buffer_size + png_ptr->current_buffer_size >
png_ptr->save_buffer_max)
{
- png_size_t new_max;
+ size_t new_max;
png_bytep old_buffer;
if (png_ptr->save_buffer_size > PNG_SIZE_MAX -
@@ -494,7 +494,7 @@
new_max = png_ptr->save_buffer_size + png_ptr->current_buffer_size + 256;
old_buffer = png_ptr->save_buffer;
png_ptr->save_buffer = (png_bytep)png_malloc_warn(png_ptr,
- (png_size_t)new_max);
+ (size_t)new_max);
if (png_ptr->save_buffer == NULL)
{
@@ -522,7 +522,7 @@
void /* PRIVATE */
png_push_restore_buffer(png_structrp png_ptr, png_bytep buffer,
- png_size_t buffer_length)
+ size_t buffer_length)
{
png_ptr->current_buffer = buffer;
png_ptr->current_buffer_size = buffer_length;
@@ -562,7 +562,7 @@
if (png_ptr->idat_size != 0 && png_ptr->save_buffer_size != 0)
{
- png_size_t save_size = png_ptr->save_buffer_size;
+ size_t save_size = png_ptr->save_buffer_size;
png_uint_32 idat_size = png_ptr->idat_size;
/* We want the smaller of 'idat_size' and 'current_buffer_size', but they
@@ -572,7 +572,7 @@
* will break on either 16-bit or 64-bit platforms.
*/
if (idat_size < save_size)
- save_size = (png_size_t)idat_size;
+ save_size = (size_t)idat_size;
else
idat_size = (png_uint_32)save_size;
@@ -589,7 +589,7 @@
if (png_ptr->idat_size != 0 && png_ptr->current_buffer_size != 0)
{
- png_size_t save_size = png_ptr->current_buffer_size;
+ size_t save_size = png_ptr->current_buffer_size;
png_uint_32 idat_size = png_ptr->idat_size;
/* We want the smaller of 'idat_size' and 'current_buffer_size', but they
@@ -598,7 +598,7 @@
* larger - this cannot overflow.
*/
if (idat_size < save_size)
- save_size = (png_size_t)idat_size;
+ save_size = (size_t)idat_size;
else
idat_size = (png_uint_32)save_size;
@@ -625,7 +625,7 @@
void /* PRIVATE */
png_process_IDAT_data(png_structrp png_ptr, png_bytep buffer,
- png_size_t buffer_length)
+ size_t buffer_length)
{
/* The caller checks for a non-zero buffer length. */
if (!(buffer_length > 0) || buffer == NULL)
diff --git a/pngpriv.h b/pngpriv.h
index 1f2e90f..3581f67 100644
--- a/pngpriv.h
+++ b/pngpriv.h
@@ -1,8 +1,8 @@
/* pngpriv.h - private declarations for use inside libpng
*
- * Last changed in libpng 1.6.32 [August 24, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -210,7 +210,11 @@
defined(__SSE2__) || defined(_M_X64) || defined(_M_AMD64) || \
(defined(_M_IX86_FP) && _M_IX86_FP >= 2)
# define PNG_INTEL_SSE_OPT 1
+# else
+# define PNG_INTEL_SSE_OPT 0
# endif
+# else
+# define PNG_INTEL_SSE_OPT 0
# endif
#endif
@@ -234,6 +238,8 @@
# if PNG_INTEL_SSE_IMPLEMENTATION > 0
# define PNG_FILTER_OPTIMIZATIONS png_init_filter_functions_sse2
# endif
+#else
+# define PNG_INTEL_SSE_IMPLEMENTATION 0
#endif
#if PNG_MIPS_MSA_OPT > 0
@@ -728,8 +734,8 @@
/* Added to libpng-1.2.6 JB */
#define PNG_ROWBYTES(pixel_bits, width) \
((pixel_bits) >= 8 ? \
- ((png_size_t)(width) * (((png_size_t)(pixel_bits)) >> 3)) : \
- (( ((png_size_t)(width) * ((png_size_t)(pixel_bits))) + 7) >> 3) )
+ ((size_t)(width) * (((size_t)(pixel_bits)) >> 3)) : \
+ (( ((size_t)(width) * ((size_t)(pixel_bits))) + 7) >> 3) )
/* This returns the number of trailing bits in the last byte of a row, 0 if the
* last byte is completely full of pixels. It is, in principle, (pixel_bits x
@@ -917,7 +923,7 @@
* PNG files the -I directives must match.
*
* The most likely explanation is that you passed a -I in CFLAGS. This will
- * not work; all the preprocessor directories and in particular all the -I
+ * not work; all the preprocessor directives and in particular all the -I
* directives must be in CPPFLAGS.
*/
#endif
@@ -1046,15 +1052,15 @@
*/
PNG_INTERNAL_FUNCTION(void PNGCBAPI,png_default_read_data,(png_structp png_ptr,
- png_bytep data, png_size_t length),PNG_EMPTY);
+ png_bytep data, size_t length),PNG_EMPTY);
#ifdef PNG_PROGRESSIVE_READ_SUPPORTED
PNG_INTERNAL_FUNCTION(void PNGCBAPI,png_push_fill_buffer,(png_structp png_ptr,
- png_bytep buffer, png_size_t length),PNG_EMPTY);
+ png_bytep buffer, size_t length),PNG_EMPTY);
#endif
PNG_INTERNAL_FUNCTION(void PNGCBAPI,png_default_write_data,(png_structp png_ptr,
- png_bytep data, png_size_t length),PNG_EMPTY);
+ png_bytep data, size_t length),PNG_EMPTY);
#ifdef PNG_WRITE_FLUSH_SUPPORTED
# ifdef PNG_STDIO_SUPPORTED
@@ -1068,7 +1074,7 @@
/* Write the "data" buffer to whatever output you are using */
PNG_INTERNAL_FUNCTION(void,png_write_data,(png_structrp png_ptr,
- png_const_bytep data, png_size_t length),PNG_EMPTY);
+ png_const_bytep data, size_t length),PNG_EMPTY);
/* Read and check the PNG file signature */
PNG_INTERNAL_FUNCTION(void,png_read_sig,(png_structrp png_ptr,
@@ -1080,7 +1086,7 @@
/* Read data from whatever input you are using into the "data" buffer */
PNG_INTERNAL_FUNCTION(void,png_read_data,(png_structrp png_ptr, png_bytep data,
- png_size_t length),PNG_EMPTY);
+ size_t length),PNG_EMPTY);
/* Read bytes into buf, and update png_ptr->crc */
PNG_INTERNAL_FUNCTION(void,png_crc_read,(png_structrp png_ptr, png_bytep buf,
@@ -1098,7 +1104,7 @@
* since this is the maximum buffer size we can specify.
*/
PNG_INTERNAL_FUNCTION(void,png_calculate_crc,(png_structrp png_ptr,
- png_const_bytep ptr, png_size_t length),PNG_EMPTY);
+ png_const_bytep ptr, size_t length),PNG_EMPTY);
#ifdef PNG_WRITE_FLUSH_SUPPORTED
PNG_INTERNAL_FUNCTION(void,png_flush,(png_structrp png_ptr),PNG_EMPTY);
@@ -1181,7 +1187,7 @@
/* Chunks that have keywords */
#ifdef PNG_WRITE_tEXt_SUPPORTED
PNG_INTERNAL_FUNCTION(void,png_write_tEXt,(png_structrp png_ptr,
- png_const_charp key, png_const_charp text, png_size_t text_len),PNG_EMPTY);
+ png_const_charp key, png_const_charp text, size_t text_len),PNG_EMPTY);
#endif
#ifdef PNG_WRITE_zTXt_SUPPORTED
@@ -1574,10 +1580,10 @@
PNG_INTERNAL_FUNCTION(void,png_push_save_buffer,(png_structrp png_ptr),
PNG_EMPTY);
PNG_INTERNAL_FUNCTION(void,png_push_restore_buffer,(png_structrp png_ptr,
- png_bytep buffer, png_size_t buffer_length),PNG_EMPTY);
+ png_bytep buffer, size_t buffer_length),PNG_EMPTY);
PNG_INTERNAL_FUNCTION(void,png_push_read_IDAT,(png_structrp png_ptr),PNG_EMPTY);
PNG_INTERNAL_FUNCTION(void,png_process_IDAT_data,(png_structrp png_ptr,
- png_bytep buffer, png_size_t buffer_length),PNG_EMPTY);
+ png_bytep buffer, size_t buffer_length),PNG_EMPTY);
PNG_INTERNAL_FUNCTION(void,png_push_process_row,(png_structrp png_ptr),
PNG_EMPTY);
PNG_INTERNAL_FUNCTION(void,png_push_handle_unknown,(png_structrp png_ptr,
@@ -1847,13 +1853,13 @@
#ifdef PNG_FLOATING_POINT_SUPPORTED
PNG_INTERNAL_FUNCTION(void,png_ascii_from_fp,(png_const_structrp png_ptr,
- png_charp ascii, png_size_t size, double fp, unsigned int precision),
+ png_charp ascii, size_t size, double fp, unsigned int precision),
PNG_EMPTY);
#endif /* FLOATING_POINT */
#ifdef PNG_FIXED_POINT_SUPPORTED
PNG_INTERNAL_FUNCTION(void,png_ascii_from_fixed,(png_const_structrp png_ptr,
- png_charp ascii, png_size_t size, png_fixed_point fp),PNG_EMPTY);
+ png_charp ascii, size_t size, png_fixed_point fp),PNG_EMPTY);
#endif /* FIXED_POINT */
#endif /* sCAL */
@@ -1946,7 +1952,7 @@
* the problem character.) This has not been tested within libpng.
*/
PNG_INTERNAL_FUNCTION(int,png_check_fp_number,(png_const_charp string,
- png_size_t size, int *statep, png_size_tp whereami),PNG_EMPTY);
+ size_t size, int *statep, png_size_tp whereami),PNG_EMPTY);
/* This is the same but it checks a complete string and returns true
* only if it just contains a floating point number. As of 1.5.4 this
@@ -1955,7 +1961,7 @@
* for negative or zero values using the sticky flag.
*/
PNG_INTERNAL_FUNCTION(int,png_check_fp_string,(png_const_charp string,
- png_size_t size),PNG_EMPTY);
+ size_t size),PNG_EMPTY);
#endif /* pCAL || sCAL */
#if defined(PNG_GAMMA_SUPPORTED) ||\
@@ -2030,7 +2036,7 @@
png_voidp error_buf; /* Always a jmp_buf at present. */
png_const_bytep memory; /* Memory buffer. */
- png_size_t size; /* Size of the memory buffer. */
+ size_t size; /* Size of the memory buffer. */
unsigned int for_write :1; /* Otherwise it is a read structure */
unsigned int owned_file :1; /* We own the file in io_ptr */
diff --git a/pngread.c b/pngread.c
index da32e9a..bff7503 100644
--- a/pngread.c
+++ b/pngread.c
@@ -1,8 +1,8 @@
/* pngread.c - read a PNG file
*
- * Last changed in libpng 1.6.33 [September 28, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -1532,7 +1532,7 @@
#endif /* STDIO */
static void PNGCBAPI
-png_image_memory_read(png_structp png_ptr, png_bytep out, png_size_t need)
+png_image_memory_read(png_structp png_ptr, png_bytep out, size_t need)
{
if (png_ptr != NULL)
{
@@ -1543,7 +1543,7 @@
if (cp != NULL)
{
png_const_bytep memory = cp->memory;
- png_size_t size = cp->size;
+ size_t size = cp->size;
if (memory != NULL && size >= need)
{
@@ -1562,7 +1562,7 @@
}
int PNGAPI png_image_begin_read_from_memory(png_imagep image,
- png_const_voidp memory, png_size_t size)
+ png_const_voidp memory, size_t size)
{
if (image != NULL && image->version == PNG_IMAGE_VERSION)
{
@@ -4150,7 +4150,7 @@
*
* NOTE: this will be changed in 1.7 because PNG_IMAGE_BUFFER_SIZE
* will be changed to use png_alloc_size_t; bigger images can be
- * accomodated on 64-bit systems.
+ * accommodated on 64-bit systems.
*/
if (image->height <=
0xffffffffU/PNG_IMAGE_PIXEL_COMPONENT_SIZE(image->format)/check)
diff --git a/pngrio.c b/pngrio.c
index 7e26e85..3722214 100644
--- a/pngrio.c
+++ b/pngrio.c
@@ -1,8 +1,8 @@
/* pngrio.c - functions for data input
*
- * Last changed in libpng 1.6.24 [August 4, 2016]
- * Copyright (c) 1998-2002,2004,2006-2016 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2016,2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -29,7 +29,7 @@
* to read more than 64K on a 16-bit machine.
*/
void /* PRIVATE */
-png_read_data(png_structrp png_ptr, png_bytep data, png_size_t length)
+png_read_data(png_structrp png_ptr, png_bytep data, size_t length)
{
png_debug1(4, "reading %d bytes", (int)length);
@@ -47,14 +47,14 @@
* than changing the library.
*/
void PNGCBAPI
-png_default_read_data(png_structp png_ptr, png_bytep data, png_size_t length)
+png_default_read_data(png_structp png_ptr, png_bytep data, size_t length)
{
- png_size_t check;
+ size_t check;
if (png_ptr == NULL)
return;
- /* fread() returns 0 on error, so it is OK to store this in a png_size_t
+ /* fread() returns 0 on error, so it is OK to store this in a size_t
* instead of an int, which is what fread() actually returns.
*/
check = fread(data, 1, length, png_voidcast(png_FILE_p, png_ptr->io_ptr));
diff --git a/pngrtran.c b/pngrtran.c
index c189650..67d1f24 100644
--- a/pngrtran.c
+++ b/pngrtran.c
@@ -1,8 +1,8 @@
/* pngrtran.c - transforms the data in a row for PNG readers
*
- * Last changed in libpng 1.6.33 [September 28, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -292,7 +292,7 @@
* who use the inverse of the gamma value accidentally! Since some of these
* values are reasonable this may have to be changed:
*
- * 1.6.x: changed from 0.07..3 to 0.01..100 (to accomodate the optimal 16-bit
+ * 1.6.x: changed from 0.07..3 to 0.01..100 (to accommodate the optimal 16-bit
* gamma of 36, and its reciprocal.)
*/
if (output_gamma < 1000 || output_gamma > 10000000)
@@ -747,7 +747,7 @@
int num_red = (1 << PNG_QUANTIZE_RED_BITS);
int num_green = (1 << PNG_QUANTIZE_GREEN_BITS);
int num_blue = (1 << PNG_QUANTIZE_BLUE_BITS);
- png_size_t num_entries = ((png_size_t)1 << total_bits);
+ size_t num_entries = ((size_t)1 << total_bits);
png_ptr->palette_lookup = (png_bytep)png_calloc(png_ptr,
(png_alloc_size_t)(num_entries * (sizeof (png_byte))));
@@ -1317,7 +1317,7 @@
else if (png_ptr->screen_gamma != 0)
/* The converse - assume the file matches the screen, note that this
- * perhaps undesireable default can (from 1.5.4) be changed by calling
+ * perhaps undesirable default can (from 1.5.4) be changed by calling
* png_set_alpha_mode (even if the alpha handling mode isn't required
* or isn't changed from the default.)
*/
@@ -1885,7 +1885,7 @@
png_ptr->transformations &= ~PNG_SHIFT;
- /* significant bits can be in the range 1 to 7 for a meaninful result, if
+ /* significant bits can be in the range 1 to 7 for a meaningful result, if
* the number of significant bits is 0 then no shift is done (this is an
* error condition which is silently ignored.)
*/
@@ -2151,8 +2151,8 @@
{
case 1:
{
- png_bytep sp = row + (png_size_t)((row_width - 1) >> 3);
- png_bytep dp = row + (png_size_t)row_width - 1;
+ png_bytep sp = row + (size_t)((row_width - 1) >> 3);
+ png_bytep dp = row + (size_t)row_width - 1;
png_uint_32 shift = 7U - ((row_width + 7U) & 0x07);
for (i = 0; i < row_width; i++)
{
@@ -2175,8 +2175,8 @@
case 2:
{
- png_bytep sp = row + (png_size_t)((row_width - 1) >> 2);
- png_bytep dp = row + (png_size_t)row_width - 1;
+ png_bytep sp = row + (size_t)((row_width - 1) >> 2);
+ png_bytep dp = row + (size_t)row_width - 1;
png_uint_32 shift = ((3U - ((row_width + 3U) & 0x03)) << 1);
for (i = 0; i < row_width; i++)
{
@@ -2198,8 +2198,8 @@
case 4:
{
- png_bytep sp = row + (png_size_t)((row_width - 1) >> 1);
- png_bytep dp = row + (png_size_t)row_width - 1;
+ png_bytep sp = row + (size_t)((row_width - 1) >> 1);
+ png_bytep dp = row + (size_t)row_width - 1;
png_uint_32 shift = ((1U - ((row_width + 1U) & 0x01)) << 2);
for (i = 0; i < row_width; i++)
{
@@ -2463,95 +2463,94 @@
static void
png_do_read_swap_alpha(png_row_infop row_info, png_bytep row)
{
+ png_uint_32 row_width = row_info->width;
+
png_debug(1, "in png_do_read_swap_alpha");
+ if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA)
{
- png_uint_32 row_width = row_info->width;
- if (row_info->color_type == PNG_COLOR_TYPE_RGB_ALPHA)
+ /* This converts from RGBA to ARGB */
+ if (row_info->bit_depth == 8)
{
- /* This converts from RGBA to ARGB */
- if (row_info->bit_depth == 8)
+ png_bytep sp = row + row_info->rowbytes;
+ png_bytep dp = sp;
+ png_byte save;
+ png_uint_32 i;
+
+ for (i = 0; i < row_width; i++)
{
- png_bytep sp = row + row_info->rowbytes;
- png_bytep dp = sp;
- png_byte save;
- png_uint_32 i;
-
- for (i = 0; i < row_width; i++)
- {
- save = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = save;
- }
+ save = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = save;
}
-
-#ifdef PNG_READ_16BIT_SUPPORTED
- /* This converts from RRGGBBAA to AARRGGBB */
- else
- {
- png_bytep sp = row + row_info->rowbytes;
- png_bytep dp = sp;
- png_byte save[2];
- png_uint_32 i;
-
- for (i = 0; i < row_width; i++)
- {
- save[0] = *(--sp);
- save[1] = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = save[0];
- *(--dp) = save[1];
- }
- }
-#endif
}
- else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA)
+#ifdef PNG_READ_16BIT_SUPPORTED
+ /* This converts from RRGGBBAA to AARRGGBB */
+ else
{
- /* This converts from GA to AG */
- if (row_info->bit_depth == 8)
- {
- png_bytep sp = row + row_info->rowbytes;
- png_bytep dp = sp;
- png_byte save;
- png_uint_32 i;
+ png_bytep sp = row + row_info->rowbytes;
+ png_bytep dp = sp;
+ png_byte save[2];
+ png_uint_32 i;
- for (i = 0; i < row_width; i++)
- {
- save = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = save;
- }
+ for (i = 0; i < row_width; i++)
+ {
+ save[0] = *(--sp);
+ save[1] = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = save[0];
+ *(--dp) = save[1];
}
+ }
+#endif
+ }
+
+ else if (row_info->color_type == PNG_COLOR_TYPE_GRAY_ALPHA)
+ {
+ /* This converts from GA to AG */
+ if (row_info->bit_depth == 8)
+ {
+ png_bytep sp = row + row_info->rowbytes;
+ png_bytep dp = sp;
+ png_byte save;
+ png_uint_32 i;
+
+ for (i = 0; i < row_width; i++)
+ {
+ save = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = save;
+ }
+ }
#ifdef PNG_READ_16BIT_SUPPORTED
- /* This converts from GGAA to AAGG */
- else
- {
- png_bytep sp = row + row_info->rowbytes;
- png_bytep dp = sp;
- png_byte save[2];
- png_uint_32 i;
+ /* This converts from GGAA to AAGG */
+ else
+ {
+ png_bytep sp = row + row_info->rowbytes;
+ png_bytep dp = sp;
+ png_byte save[2];
+ png_uint_32 i;
- for (i = 0; i < row_width; i++)
- {
- save[0] = *(--sp);
- save[1] = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = *(--sp);
- *(--dp) = save[0];
- *(--dp) = save[1];
- }
+ for (i = 0; i < row_width; i++)
+ {
+ save[0] = *(--sp);
+ save[1] = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = *(--sp);
+ *(--dp) = save[0];
+ *(--dp) = save[1];
}
-#endif
}
+#endif
}
}
#endif
@@ -2681,8 +2680,8 @@
if ((flags & PNG_FLAG_FILLER_AFTER) != 0)
{
/* This changes the data from G to GX */
- png_bytep sp = row + (png_size_t)row_width;
- png_bytep dp = sp + (png_size_t)row_width;
+ png_bytep sp = row + (size_t)row_width;
+ png_bytep dp = sp + (size_t)row_width;
for (i = 1; i < row_width; i++)
{
*(--dp) = lo_filler;
@@ -2697,8 +2696,8 @@
else
{
/* This changes the data from G to XG */
- png_bytep sp = row + (png_size_t)row_width;
- png_bytep dp = sp + (png_size_t)row_width;
+ png_bytep sp = row + (size_t)row_width;
+ png_bytep dp = sp + (size_t)row_width;
for (i = 0; i < row_width; i++)
{
*(--dp) = *(--sp);
@@ -2716,8 +2715,8 @@
if ((flags & PNG_FLAG_FILLER_AFTER) != 0)
{
/* This changes the data from GG to GGXX */
- png_bytep sp = row + (png_size_t)row_width * 2;
- png_bytep dp = sp + (png_size_t)row_width * 2;
+ png_bytep sp = row + (size_t)row_width * 2;
+ png_bytep dp = sp + (size_t)row_width * 2;
for (i = 1; i < row_width; i++)
{
*(--dp) = lo_filler;
@@ -2735,8 +2734,8 @@
else
{
/* This changes the data from GG to XXGG */
- png_bytep sp = row + (png_size_t)row_width * 2;
- png_bytep dp = sp + (png_size_t)row_width * 2;
+ png_bytep sp = row + (size_t)row_width * 2;
+ png_bytep dp = sp + (size_t)row_width * 2;
for (i = 0; i < row_width; i++)
{
*(--dp) = *(--sp);
@@ -2758,8 +2757,8 @@
if ((flags & PNG_FLAG_FILLER_AFTER) != 0)
{
/* This changes the data from RGB to RGBX */
- png_bytep sp = row + (png_size_t)row_width * 3;
- png_bytep dp = sp + (png_size_t)row_width;
+ png_bytep sp = row + (size_t)row_width * 3;
+ png_bytep dp = sp + (size_t)row_width;
for (i = 1; i < row_width; i++)
{
*(--dp) = lo_filler;
@@ -2776,8 +2775,8 @@
else
{
/* This changes the data from RGB to XRGB */
- png_bytep sp = row + (png_size_t)row_width * 3;
- png_bytep dp = sp + (png_size_t)row_width;
+ png_bytep sp = row + (size_t)row_width * 3;
+ png_bytep dp = sp + (size_t)row_width;
for (i = 0; i < row_width; i++)
{
*(--dp) = *(--sp);
@@ -2797,8 +2796,8 @@
if ((flags & PNG_FLAG_FILLER_AFTER) != 0)
{
/* This changes the data from RRGGBB to RRGGBBXX */
- png_bytep sp = row + (png_size_t)row_width * 6;
- png_bytep dp = sp + (png_size_t)row_width * 2;
+ png_bytep sp = row + (size_t)row_width * 6;
+ png_bytep dp = sp + (size_t)row_width * 2;
for (i = 1; i < row_width; i++)
{
*(--dp) = lo_filler;
@@ -2820,8 +2819,8 @@
else
{
/* This changes the data from RRGGBB to XXRRGGBB */
- png_bytep sp = row + (png_size_t)row_width * 6;
- png_bytep dp = sp + (png_size_t)row_width * 2;
+ png_bytep sp = row + (size_t)row_width * 6;
+ png_bytep dp = sp + (size_t)row_width * 2;
for (i = 0; i < row_width; i++)
{
*(--dp) = *(--sp);
@@ -2862,8 +2861,8 @@
if (row_info->bit_depth == 8)
{
/* This changes G to RGB */
- png_bytep sp = row + (png_size_t)row_width - 1;
- png_bytep dp = sp + (png_size_t)row_width * 2;
+ png_bytep sp = row + (size_t)row_width - 1;
+ png_bytep dp = sp + (size_t)row_width * 2;
for (i = 0; i < row_width; i++)
{
*(dp--) = *sp;
@@ -2875,8 +2874,8 @@
else
{
/* This changes GG to RRGGBB */
- png_bytep sp = row + (png_size_t)row_width * 2 - 1;
- png_bytep dp = sp + (png_size_t)row_width * 4;
+ png_bytep sp = row + (size_t)row_width * 2 - 1;
+ png_bytep dp = sp + (size_t)row_width * 4;
for (i = 0; i < row_width; i++)
{
*(dp--) = *sp;
@@ -2894,8 +2893,8 @@
if (row_info->bit_depth == 8)
{
/* This changes GA to RGBA */
- png_bytep sp = row + (png_size_t)row_width * 2 - 1;
- png_bytep dp = sp + (png_size_t)row_width * 2;
+ png_bytep sp = row + (size_t)row_width * 2 - 1;
+ png_bytep dp = sp + (size_t)row_width * 2;
for (i = 0; i < row_width; i++)
{
*(dp--) = *(sp--);
@@ -2908,8 +2907,8 @@
else
{
/* This changes GGAA to RRGGBBAA */
- png_bytep sp = row + (png_size_t)row_width * 4 - 1;
- png_bytep dp = sp + (png_size_t)row_width * 4;
+ png_bytep sp = row + (size_t)row_width * 4 - 1;
+ png_bytep dp = sp + (size_t)row_width * 4;
for (i = 0; i < row_width; i++)
{
*(dp--) = *(sp--);
@@ -2980,7 +2979,7 @@
* values this results in an implicit assumption that the original PNG RGB
* values were linear.
*
- * Other integer coefficents can be used via png_set_rgb_to_gray(). Because
+ * Other integer coefficients can be used via png_set_rgb_to_gray(). Because
* the API takes just red and green coefficients the blue coefficient is
* calculated to make the sum 32768. This will result in different rounding
* to that used above.
@@ -3209,419 +3208,229 @@
png_debug(1, "in png_do_compose");
+ switch (row_info->color_type)
{
- switch (row_info->color_type)
+ case PNG_COLOR_TYPE_GRAY:
{
- case PNG_COLOR_TYPE_GRAY:
+ switch (row_info->bit_depth)
{
- switch (row_info->bit_depth)
+ case 1:
{
- case 1:
+ sp = row;
+ shift = 7;
+ for (i = 0; i < row_width; i++)
{
- sp = row;
- shift = 7;
- for (i = 0; i < row_width; i++)
+ if ((png_uint_16)((*sp >> shift) & 0x01)
+ == png_ptr->trans_color.gray)
{
- if ((png_uint_16)((*sp >> shift) & 0x01)
- == png_ptr->trans_color.gray)
- {
- unsigned int tmp = *sp & (0x7f7f >> (7 - shift));
- tmp |=
- (unsigned int)(png_ptr->background.gray << shift);
- *sp = (png_byte)(tmp & 0xff);
- }
-
- if (shift == 0)
- {
- shift = 7;
- sp++;
- }
-
- else
- shift--;
+ unsigned int tmp = *sp & (0x7f7f >> (7 - shift));
+ tmp |=
+ (unsigned int)(png_ptr->background.gray << shift);
+ *sp = (png_byte)(tmp & 0xff);
}
- break;
- }
- case 2:
- {
-#ifdef PNG_READ_GAMMA_SUPPORTED
- if (gamma_table != NULL)
+ if (shift == 0)
{
- sp = row;
- shift = 6;
- for (i = 0; i < row_width; i++)
- {
- if ((png_uint_16)((*sp >> shift) & 0x03)
- == png_ptr->trans_color.gray)
- {
- unsigned int tmp = *sp & (0x3f3f >> (6 - shift));
- tmp |=
- (unsigned int)png_ptr->background.gray << shift;
- *sp = (png_byte)(tmp & 0xff);
- }
-
- else
- {
- unsigned int p = (*sp >> shift) & 0x03;
- unsigned int g = (gamma_table [p | (p << 2) |
- (p << 4) | (p << 6)] >> 6) & 0x03;
- unsigned int tmp = *sp & (0x3f3f >> (6 - shift));
- tmp |= (unsigned int)(g << shift);
- *sp = (png_byte)(tmp & 0xff);
- }
-
- if (shift == 0)
- {
- shift = 6;
- sp++;
- }
-
- else
- shift -= 2;
- }
+ shift = 7;
+ sp++;
}
else
-#endif
- {
- sp = row;
- shift = 6;
- for (i = 0; i < row_width; i++)
- {
- if ((png_uint_16)((*sp >> shift) & 0x03)
- == png_ptr->trans_color.gray)
- {
- unsigned int tmp = *sp & (0x3f3f >> (6 - shift));
- tmp |=
- (unsigned int)png_ptr->background.gray << shift;
- *sp = (png_byte)(tmp & 0xff);
- }
-
- if (shift == 0)
- {
- shift = 6;
- sp++;
- }
-
- else
- shift -= 2;
- }
- }
- break;
+ shift--;
}
-
- case 4:
- {
-#ifdef PNG_READ_GAMMA_SUPPORTED
- if (gamma_table != NULL)
- {
- sp = row;
- shift = 4;
- for (i = 0; i < row_width; i++)
- {
- if ((png_uint_16)((*sp >> shift) & 0x0f)
- == png_ptr->trans_color.gray)
- {
- unsigned int tmp = *sp & (0x0f0f >> (4 - shift));
- tmp |=
- (unsigned int)(png_ptr->background.gray << shift);
- *sp = (png_byte)(tmp & 0xff);
- }
-
- else
- {
- unsigned int p = (*sp >> shift) & 0x0f;
- unsigned int g = (gamma_table[p | (p << 4)] >> 4) &
- 0x0f;
- unsigned int tmp = *sp & (0x0f0f >> (4 - shift));
- tmp |= (unsigned int)(g << shift);
- *sp = (png_byte)(tmp & 0xff);
- }
-
- if (shift == 0)
- {
- shift = 4;
- sp++;
- }
-
- else
- shift -= 4;
- }
- }
-
- else
-#endif
- {
- sp = row;
- shift = 4;
- for (i = 0; i < row_width; i++)
- {
- if ((png_uint_16)((*sp >> shift) & 0x0f)
- == png_ptr->trans_color.gray)
- {
- unsigned int tmp = *sp & (0x0f0f >> (4 - shift));
- tmp |=
- (unsigned int)(png_ptr->background.gray << shift);
- *sp = (png_byte)(tmp & 0xff);
- }
-
- if (shift == 0)
- {
- shift = 4;
- sp++;
- }
-
- else
- shift -= 4;
- }
- }
- break;
- }
-
- case 8:
- {
-#ifdef PNG_READ_GAMMA_SUPPORTED
- if (gamma_table != NULL)
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp++)
- {
- if (*sp == png_ptr->trans_color.gray)
- *sp = (png_byte)png_ptr->background.gray;
-
- else
- *sp = gamma_table[*sp];
- }
- }
- else
-#endif
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp++)
- {
- if (*sp == png_ptr->trans_color.gray)
- *sp = (png_byte)png_ptr->background.gray;
- }
- }
- break;
- }
-
- case 16:
- {
-#ifdef PNG_READ_GAMMA_SUPPORTED
- if (gamma_16 != NULL)
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 2)
- {
- png_uint_16 v;
-
- v = (png_uint_16)(((*sp) << 8) + *(sp + 1));
-
- if (v == png_ptr->trans_color.gray)
- {
- /* Background is already in screen gamma */
- *sp = (png_byte)((png_ptr->background.gray >> 8)
- & 0xff);
- *(sp + 1) = (png_byte)(png_ptr->background.gray
- & 0xff);
- }
-
- else
- {
- v = gamma_16[*(sp + 1) >> gamma_shift][*sp];
- *sp = (png_byte)((v >> 8) & 0xff);
- *(sp + 1) = (png_byte)(v & 0xff);
- }
- }
- }
- else
-#endif
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 2)
- {
- png_uint_16 v;
-
- v = (png_uint_16)(((*sp) << 8) + *(sp + 1));
-
- if (v == png_ptr->trans_color.gray)
- {
- *sp = (png_byte)((png_ptr->background.gray >> 8)
- & 0xff);
- *(sp + 1) = (png_byte)(png_ptr->background.gray
- & 0xff);
- }
- }
- }
- break;
- }
-
- default:
- break;
+ break;
}
- break;
- }
- case PNG_COLOR_TYPE_RGB:
- {
- if (row_info->bit_depth == 8)
+ case 2:
{
#ifdef PNG_READ_GAMMA_SUPPORTED
if (gamma_table != NULL)
{
sp = row;
- for (i = 0; i < row_width; i++, sp += 3)
+ shift = 6;
+ for (i = 0; i < row_width; i++)
{
- if (*sp == png_ptr->trans_color.red &&
- *(sp + 1) == png_ptr->trans_color.green &&
- *(sp + 2) == png_ptr->trans_color.blue)
+ if ((png_uint_16)((*sp >> shift) & 0x03)
+ == png_ptr->trans_color.gray)
{
- *sp = (png_byte)png_ptr->background.red;
- *(sp + 1) = (png_byte)png_ptr->background.green;
- *(sp + 2) = (png_byte)png_ptr->background.blue;
+ unsigned int tmp = *sp & (0x3f3f >> (6 - shift));
+ tmp |=
+ (unsigned int)png_ptr->background.gray << shift;
+ *sp = (png_byte)(tmp & 0xff);
}
else
{
- *sp = gamma_table[*sp];
- *(sp + 1) = gamma_table[*(sp + 1)];
- *(sp + 2) = gamma_table[*(sp + 2)];
+ unsigned int p = (*sp >> shift) & 0x03;
+ unsigned int g = (gamma_table [p | (p << 2) |
+ (p << 4) | (p << 6)] >> 6) & 0x03;
+ unsigned int tmp = *sp & (0x3f3f >> (6 - shift));
+ tmp |= (unsigned int)(g << shift);
+ *sp = (png_byte)(tmp & 0xff);
}
+
+ if (shift == 0)
+ {
+ shift = 6;
+ sp++;
+ }
+
+ else
+ shift -= 2;
+ }
+ }
+
+ else
+#endif
+ {
+ sp = row;
+ shift = 6;
+ for (i = 0; i < row_width; i++)
+ {
+ if ((png_uint_16)((*sp >> shift) & 0x03)
+ == png_ptr->trans_color.gray)
+ {
+ unsigned int tmp = *sp & (0x3f3f >> (6 - shift));
+ tmp |=
+ (unsigned int)png_ptr->background.gray << shift;
+ *sp = (png_byte)(tmp & 0xff);
+ }
+
+ if (shift == 0)
+ {
+ shift = 6;
+ sp++;
+ }
+
+ else
+ shift -= 2;
+ }
+ }
+ break;
+ }
+
+ case 4:
+ {
+#ifdef PNG_READ_GAMMA_SUPPORTED
+ if (gamma_table != NULL)
+ {
+ sp = row;
+ shift = 4;
+ for (i = 0; i < row_width; i++)
+ {
+ if ((png_uint_16)((*sp >> shift) & 0x0f)
+ == png_ptr->trans_color.gray)
+ {
+ unsigned int tmp = *sp & (0x0f0f >> (4 - shift));
+ tmp |=
+ (unsigned int)(png_ptr->background.gray << shift);
+ *sp = (png_byte)(tmp & 0xff);
+ }
+
+ else
+ {
+ unsigned int p = (*sp >> shift) & 0x0f;
+ unsigned int g = (gamma_table[p | (p << 4)] >> 4) &
+ 0x0f;
+ unsigned int tmp = *sp & (0x0f0f >> (4 - shift));
+ tmp |= (unsigned int)(g << shift);
+ *sp = (png_byte)(tmp & 0xff);
+ }
+
+ if (shift == 0)
+ {
+ shift = 4;
+ sp++;
+ }
+
+ else
+ shift -= 4;
+ }
+ }
+
+ else
+#endif
+ {
+ sp = row;
+ shift = 4;
+ for (i = 0; i < row_width; i++)
+ {
+ if ((png_uint_16)((*sp >> shift) & 0x0f)
+ == png_ptr->trans_color.gray)
+ {
+ unsigned int tmp = *sp & (0x0f0f >> (4 - shift));
+ tmp |=
+ (unsigned int)(png_ptr->background.gray << shift);
+ *sp = (png_byte)(tmp & 0xff);
+ }
+
+ if (shift == 0)
+ {
+ shift = 4;
+ sp++;
+ }
+
+ else
+ shift -= 4;
+ }
+ }
+ break;
+ }
+
+ case 8:
+ {
+#ifdef PNG_READ_GAMMA_SUPPORTED
+ if (gamma_table != NULL)
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp++)
+ {
+ if (*sp == png_ptr->trans_color.gray)
+ *sp = (png_byte)png_ptr->background.gray;
+
+ else
+ *sp = gamma_table[*sp];
}
}
else
#endif
{
sp = row;
- for (i = 0; i < row_width; i++, sp += 3)
+ for (i = 0; i < row_width; i++, sp++)
{
- if (*sp == png_ptr->trans_color.red &&
- *(sp + 1) == png_ptr->trans_color.green &&
- *(sp + 2) == png_ptr->trans_color.blue)
- {
- *sp = (png_byte)png_ptr->background.red;
- *(sp + 1) = (png_byte)png_ptr->background.green;
- *(sp + 2) = (png_byte)png_ptr->background.blue;
- }
+ if (*sp == png_ptr->trans_color.gray)
+ *sp = (png_byte)png_ptr->background.gray;
}
}
+ break;
}
- else /* if (row_info->bit_depth == 16) */
+
+ case 16:
{
#ifdef PNG_READ_GAMMA_SUPPORTED
if (gamma_16 != NULL)
{
sp = row;
- for (i = 0; i < row_width; i++, sp += 6)
- {
- png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1));
-
- png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8)
- + *(sp + 3));
-
- png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8)
- + *(sp + 5));
-
- if (r == png_ptr->trans_color.red &&
- g == png_ptr->trans_color.green &&
- b == png_ptr->trans_color.blue)
- {
- /* Background is already in screen gamma */
- *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff);
- *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff);
- *(sp + 2) = (png_byte)((png_ptr->background.green >> 8)
- & 0xff);
- *(sp + 3) = (png_byte)(png_ptr->background.green
- & 0xff);
- *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8)
- & 0xff);
- *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff);
- }
-
- else
- {
- png_uint_16 v = gamma_16[*(sp + 1) >> gamma_shift][*sp];
- *sp = (png_byte)((v >> 8) & 0xff);
- *(sp + 1) = (png_byte)(v & 0xff);
-
- v = gamma_16[*(sp + 3) >> gamma_shift][*(sp + 2)];
- *(sp + 2) = (png_byte)((v >> 8) & 0xff);
- *(sp + 3) = (png_byte)(v & 0xff);
-
- v = gamma_16[*(sp + 5) >> gamma_shift][*(sp + 4)];
- *(sp + 4) = (png_byte)((v >> 8) & 0xff);
- *(sp + 5) = (png_byte)(v & 0xff);
- }
- }
- }
-
- else
-#endif
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 6)
- {
- png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1));
-
- png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8)
- + *(sp + 3));
-
- png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8)
- + *(sp + 5));
-
- if (r == png_ptr->trans_color.red &&
- g == png_ptr->trans_color.green &&
- b == png_ptr->trans_color.blue)
- {
- *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff);
- *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff);
- *(sp + 2) = (png_byte)((png_ptr->background.green >> 8)
- & 0xff);
- *(sp + 3) = (png_byte)(png_ptr->background.green
- & 0xff);
- *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8)
- & 0xff);
- *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff);
- }
- }
- }
- }
- break;
- }
-
- case PNG_COLOR_TYPE_GRAY_ALPHA:
- {
- if (row_info->bit_depth == 8)
- {
-#ifdef PNG_READ_GAMMA_SUPPORTED
- if (gamma_to_1 != NULL && gamma_from_1 != NULL &&
- gamma_table != NULL)
- {
- sp = row;
for (i = 0; i < row_width; i++, sp += 2)
{
- png_uint_16 a = *(sp + 1);
+ png_uint_16 v;
- if (a == 0xff)
- *sp = gamma_table[*sp];
+ v = (png_uint_16)(((*sp) << 8) + *(sp + 1));
- else if (a == 0)
+ if (v == png_ptr->trans_color.gray)
{
/* Background is already in screen gamma */
- *sp = (png_byte)png_ptr->background.gray;
+ *sp = (png_byte)((png_ptr->background.gray >> 8)
+ & 0xff);
+ *(sp + 1) = (png_byte)(png_ptr->background.gray
+ & 0xff);
}
else
{
- png_byte v, w;
-
- v = gamma_to_1[*sp];
- png_composite(w, v, a, png_ptr->background_1.gray);
- if (optimize == 0)
- w = gamma_from_1[w];
- *sp = w;
+ v = gamma_16[*(sp + 1) >> gamma_shift][*sp];
+ *sp = (png_byte)((v >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(v & 0xff);
}
}
}
@@ -3631,298 +3440,486 @@
sp = row;
for (i = 0; i < row_width; i++, sp += 2)
{
- png_byte a = *(sp + 1);
+ png_uint_16 v;
- if (a == 0)
- *sp = (png_byte)png_ptr->background.gray;
+ v = (png_uint_16)(((*sp) << 8) + *(sp + 1));
- else if (a < 0xff)
- png_composite(*sp, *sp, a, png_ptr->background.gray);
- }
- }
- }
- else /* if (png_ptr->bit_depth == 16) */
- {
-#ifdef PNG_READ_GAMMA_SUPPORTED
- if (gamma_16 != NULL && gamma_16_from_1 != NULL &&
- gamma_16_to_1 != NULL)
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 4)
- {
- png_uint_16 a = (png_uint_16)(((*(sp + 2)) << 8)
- + *(sp + 3));
-
- if (a == (png_uint_16)0xffff)
- {
- png_uint_16 v;
-
- v = gamma_16[*(sp + 1) >> gamma_shift][*sp];
- *sp = (png_byte)((v >> 8) & 0xff);
- *(sp + 1) = (png_byte)(v & 0xff);
- }
-
- else if (a == 0)
- {
- /* Background is already in screen gamma */
- *sp = (png_byte)((png_ptr->background.gray >> 8)
- & 0xff);
- *(sp + 1) = (png_byte)(png_ptr->background.gray & 0xff);
- }
-
- else
- {
- png_uint_16 g, v, w;
-
- g = gamma_16_to_1[*(sp + 1) >> gamma_shift][*sp];
- png_composite_16(v, g, a, png_ptr->background_1.gray);
- if (optimize != 0)
- w = v;
- else
- w = gamma_16_from_1[(v & 0xff) >>
- gamma_shift][v >> 8];
- *sp = (png_byte)((w >> 8) & 0xff);
- *(sp + 1) = (png_byte)(w & 0xff);
- }
- }
- }
- else
-#endif
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 4)
- {
- png_uint_16 a = (png_uint_16)(((*(sp + 2)) << 8)
- + *(sp + 3));
-
- if (a == 0)
+ if (v == png_ptr->trans_color.gray)
{
*sp = (png_byte)((png_ptr->background.gray >> 8)
- & 0xff);
- *(sp + 1) = (png_byte)(png_ptr->background.gray & 0xff);
- }
-
- else if (a < 0xffff)
- {
- png_uint_16 g, v;
-
- g = (png_uint_16)(((*sp) << 8) + *(sp + 1));
- png_composite_16(v, g, a, png_ptr->background.gray);
- *sp = (png_byte)((v >> 8) & 0xff);
- *(sp + 1) = (png_byte)(v & 0xff);
+ & 0xff);
+ *(sp + 1) = (png_byte)(png_ptr->background.gray
+ & 0xff);
}
}
}
+ break;
}
- break;
+
+ default:
+ break;
}
-
- case PNG_COLOR_TYPE_RGB_ALPHA:
- {
- if (row_info->bit_depth == 8)
- {
-#ifdef PNG_READ_GAMMA_SUPPORTED
- if (gamma_to_1 != NULL && gamma_from_1 != NULL &&
- gamma_table != NULL)
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 4)
- {
- png_byte a = *(sp + 3);
-
- if (a == 0xff)
- {
- *sp = gamma_table[*sp];
- *(sp + 1) = gamma_table[*(sp + 1)];
- *(sp + 2) = gamma_table[*(sp + 2)];
- }
-
- else if (a == 0)
- {
- /* Background is already in screen gamma */
- *sp = (png_byte)png_ptr->background.red;
- *(sp + 1) = (png_byte)png_ptr->background.green;
- *(sp + 2) = (png_byte)png_ptr->background.blue;
- }
-
- else
- {
- png_byte v, w;
-
- v = gamma_to_1[*sp];
- png_composite(w, v, a, png_ptr->background_1.red);
- if (optimize == 0) w = gamma_from_1[w];
- *sp = w;
-
- v = gamma_to_1[*(sp + 1)];
- png_composite(w, v, a, png_ptr->background_1.green);
- if (optimize == 0) w = gamma_from_1[w];
- *(sp + 1) = w;
-
- v = gamma_to_1[*(sp + 2)];
- png_composite(w, v, a, png_ptr->background_1.blue);
- if (optimize == 0) w = gamma_from_1[w];
- *(sp + 2) = w;
- }
- }
- }
- else
-#endif
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 4)
- {
- png_byte a = *(sp + 3);
-
- if (a == 0)
- {
- *sp = (png_byte)png_ptr->background.red;
- *(sp + 1) = (png_byte)png_ptr->background.green;
- *(sp + 2) = (png_byte)png_ptr->background.blue;
- }
-
- else if (a < 0xff)
- {
- png_composite(*sp, *sp, a, png_ptr->background.red);
-
- png_composite(*(sp + 1), *(sp + 1), a,
- png_ptr->background.green);
-
- png_composite(*(sp + 2), *(sp + 2), a,
- png_ptr->background.blue);
- }
- }
- }
- }
- else /* if (row_info->bit_depth == 16) */
- {
-#ifdef PNG_READ_GAMMA_SUPPORTED
- if (gamma_16 != NULL && gamma_16_from_1 != NULL &&
- gamma_16_to_1 != NULL)
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 8)
- {
- png_uint_16 a = (png_uint_16)(((png_uint_16)(*(sp + 6))
- << 8) + (png_uint_16)(*(sp + 7)));
-
- if (a == (png_uint_16)0xffff)
- {
- png_uint_16 v;
-
- v = gamma_16[*(sp + 1) >> gamma_shift][*sp];
- *sp = (png_byte)((v >> 8) & 0xff);
- *(sp + 1) = (png_byte)(v & 0xff);
-
- v = gamma_16[*(sp + 3) >> gamma_shift][*(sp + 2)];
- *(sp + 2) = (png_byte)((v >> 8) & 0xff);
- *(sp + 3) = (png_byte)(v & 0xff);
-
- v = gamma_16[*(sp + 5) >> gamma_shift][*(sp + 4)];
- *(sp + 4) = (png_byte)((v >> 8) & 0xff);
- *(sp + 5) = (png_byte)(v & 0xff);
- }
-
- else if (a == 0)
- {
- /* Background is already in screen gamma */
- *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff);
- *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff);
- *(sp + 2) = (png_byte)((png_ptr->background.green >> 8)
- & 0xff);
- *(sp + 3) = (png_byte)(png_ptr->background.green
- & 0xff);
- *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8)
- & 0xff);
- *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff);
- }
-
- else
- {
- png_uint_16 v, w;
-
- v = gamma_16_to_1[*(sp + 1) >> gamma_shift][*sp];
- png_composite_16(w, v, a, png_ptr->background_1.red);
- if (optimize == 0)
- w = gamma_16_from_1[((w & 0xff) >> gamma_shift)][w >>
- 8];
- *sp = (png_byte)((w >> 8) & 0xff);
- *(sp + 1) = (png_byte)(w & 0xff);
-
- v = gamma_16_to_1[*(sp + 3) >> gamma_shift][*(sp + 2)];
- png_composite_16(w, v, a, png_ptr->background_1.green);
- if (optimize == 0)
- w = gamma_16_from_1[((w & 0xff) >> gamma_shift)][w >>
- 8];
-
- *(sp + 2) = (png_byte)((w >> 8) & 0xff);
- *(sp + 3) = (png_byte)(w & 0xff);
-
- v = gamma_16_to_1[*(sp + 5) >> gamma_shift][*(sp + 4)];
- png_composite_16(w, v, a, png_ptr->background_1.blue);
- if (optimize == 0)
- w = gamma_16_from_1[((w & 0xff) >> gamma_shift)][w >>
- 8];
-
- *(sp + 4) = (png_byte)((w >> 8) & 0xff);
- *(sp + 5) = (png_byte)(w & 0xff);
- }
- }
- }
-
- else
-#endif
- {
- sp = row;
- for (i = 0; i < row_width; i++, sp += 8)
- {
- png_uint_16 a = (png_uint_16)(((png_uint_16)(*(sp + 6))
- << 8) + (png_uint_16)(*(sp + 7)));
-
- if (a == 0)
- {
- *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff);
- *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff);
- *(sp + 2) = (png_byte)((png_ptr->background.green >> 8)
- & 0xff);
- *(sp + 3) = (png_byte)(png_ptr->background.green
- & 0xff);
- *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8)
- & 0xff);
- *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff);
- }
-
- else if (a < 0xffff)
- {
- png_uint_16 v;
-
- png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1));
- png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8)
- + *(sp + 3));
- png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8)
- + *(sp + 5));
-
- png_composite_16(v, r, a, png_ptr->background.red);
- *sp = (png_byte)((v >> 8) & 0xff);
- *(sp + 1) = (png_byte)(v & 0xff);
-
- png_composite_16(v, g, a, png_ptr->background.green);
- *(sp + 2) = (png_byte)((v >> 8) & 0xff);
- *(sp + 3) = (png_byte)(v & 0xff);
-
- png_composite_16(v, b, a, png_ptr->background.blue);
- *(sp + 4) = (png_byte)((v >> 8) & 0xff);
- *(sp + 5) = (png_byte)(v & 0xff);
- }
- }
- }
- }
- break;
- }
-
- default:
- break;
+ break;
}
+
+ case PNG_COLOR_TYPE_RGB:
+ {
+ if (row_info->bit_depth == 8)
+ {
+#ifdef PNG_READ_GAMMA_SUPPORTED
+ if (gamma_table != NULL)
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 3)
+ {
+ if (*sp == png_ptr->trans_color.red &&
+ *(sp + 1) == png_ptr->trans_color.green &&
+ *(sp + 2) == png_ptr->trans_color.blue)
+ {
+ *sp = (png_byte)png_ptr->background.red;
+ *(sp + 1) = (png_byte)png_ptr->background.green;
+ *(sp + 2) = (png_byte)png_ptr->background.blue;
+ }
+
+ else
+ {
+ *sp = gamma_table[*sp];
+ *(sp + 1) = gamma_table[*(sp + 1)];
+ *(sp + 2) = gamma_table[*(sp + 2)];
+ }
+ }
+ }
+ else
+#endif
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 3)
+ {
+ if (*sp == png_ptr->trans_color.red &&
+ *(sp + 1) == png_ptr->trans_color.green &&
+ *(sp + 2) == png_ptr->trans_color.blue)
+ {
+ *sp = (png_byte)png_ptr->background.red;
+ *(sp + 1) = (png_byte)png_ptr->background.green;
+ *(sp + 2) = (png_byte)png_ptr->background.blue;
+ }
+ }
+ }
+ }
+ else /* if (row_info->bit_depth == 16) */
+ {
+#ifdef PNG_READ_GAMMA_SUPPORTED
+ if (gamma_16 != NULL)
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 6)
+ {
+ png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1));
+
+ png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8)
+ + *(sp + 3));
+
+ png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8)
+ + *(sp + 5));
+
+ if (r == png_ptr->trans_color.red &&
+ g == png_ptr->trans_color.green &&
+ b == png_ptr->trans_color.blue)
+ {
+ /* Background is already in screen gamma */
+ *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff);
+ *(sp + 2) = (png_byte)((png_ptr->background.green >> 8)
+ & 0xff);
+ *(sp + 3) = (png_byte)(png_ptr->background.green
+ & 0xff);
+ *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8)
+ & 0xff);
+ *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff);
+ }
+
+ else
+ {
+ png_uint_16 v = gamma_16[*(sp + 1) >> gamma_shift][*sp];
+ *sp = (png_byte)((v >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(v & 0xff);
+
+ v = gamma_16[*(sp + 3) >> gamma_shift][*(sp + 2)];
+ *(sp + 2) = (png_byte)((v >> 8) & 0xff);
+ *(sp + 3) = (png_byte)(v & 0xff);
+
+ v = gamma_16[*(sp + 5) >> gamma_shift][*(sp + 4)];
+ *(sp + 4) = (png_byte)((v >> 8) & 0xff);
+ *(sp + 5) = (png_byte)(v & 0xff);
+ }
+ }
+ }
+
+ else
+#endif
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 6)
+ {
+ png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1));
+
+ png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8)
+ + *(sp + 3));
+
+ png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8)
+ + *(sp + 5));
+
+ if (r == png_ptr->trans_color.red &&
+ g == png_ptr->trans_color.green &&
+ b == png_ptr->trans_color.blue)
+ {
+ *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff);
+ *(sp + 2) = (png_byte)((png_ptr->background.green >> 8)
+ & 0xff);
+ *(sp + 3) = (png_byte)(png_ptr->background.green
+ & 0xff);
+ *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8)
+ & 0xff);
+ *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff);
+ }
+ }
+ }
+ }
+ break;
+ }
+
+ case PNG_COLOR_TYPE_GRAY_ALPHA:
+ {
+ if (row_info->bit_depth == 8)
+ {
+#ifdef PNG_READ_GAMMA_SUPPORTED
+ if (gamma_to_1 != NULL && gamma_from_1 != NULL &&
+ gamma_table != NULL)
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 2)
+ {
+ png_uint_16 a = *(sp + 1);
+
+ if (a == 0xff)
+ *sp = gamma_table[*sp];
+
+ else if (a == 0)
+ {
+ /* Background is already in screen gamma */
+ *sp = (png_byte)png_ptr->background.gray;
+ }
+
+ else
+ {
+ png_byte v, w;
+
+ v = gamma_to_1[*sp];
+ png_composite(w, v, a, png_ptr->background_1.gray);
+ if (optimize == 0)
+ w = gamma_from_1[w];
+ *sp = w;
+ }
+ }
+ }
+ else
+#endif
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 2)
+ {
+ png_byte a = *(sp + 1);
+
+ if (a == 0)
+ *sp = (png_byte)png_ptr->background.gray;
+
+ else if (a < 0xff)
+ png_composite(*sp, *sp, a, png_ptr->background.gray);
+ }
+ }
+ }
+ else /* if (png_ptr->bit_depth == 16) */
+ {
+#ifdef PNG_READ_GAMMA_SUPPORTED
+ if (gamma_16 != NULL && gamma_16_from_1 != NULL &&
+ gamma_16_to_1 != NULL)
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 4)
+ {
+ png_uint_16 a = (png_uint_16)(((*(sp + 2)) << 8)
+ + *(sp + 3));
+
+ if (a == (png_uint_16)0xffff)
+ {
+ png_uint_16 v;
+
+ v = gamma_16[*(sp + 1) >> gamma_shift][*sp];
+ *sp = (png_byte)((v >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(v & 0xff);
+ }
+
+ else if (a == 0)
+ {
+ /* Background is already in screen gamma */
+ *sp = (png_byte)((png_ptr->background.gray >> 8)
+ & 0xff);
+ *(sp + 1) = (png_byte)(png_ptr->background.gray & 0xff);
+ }
+
+ else
+ {
+ png_uint_16 g, v, w;
+
+ g = gamma_16_to_1[*(sp + 1) >> gamma_shift][*sp];
+ png_composite_16(v, g, a, png_ptr->background_1.gray);
+ if (optimize != 0)
+ w = v;
+ else
+ w = gamma_16_from_1[(v & 0xff) >>
+ gamma_shift][v >> 8];
+ *sp = (png_byte)((w >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(w & 0xff);
+ }
+ }
+ }
+ else
+#endif
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 4)
+ {
+ png_uint_16 a = (png_uint_16)(((*(sp + 2)) << 8)
+ + *(sp + 3));
+
+ if (a == 0)
+ {
+ *sp = (png_byte)((png_ptr->background.gray >> 8)
+ & 0xff);
+ *(sp + 1) = (png_byte)(png_ptr->background.gray & 0xff);
+ }
+
+ else if (a < 0xffff)
+ {
+ png_uint_16 g, v;
+
+ g = (png_uint_16)(((*sp) << 8) + *(sp + 1));
+ png_composite_16(v, g, a, png_ptr->background.gray);
+ *sp = (png_byte)((v >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(v & 0xff);
+ }
+ }
+ }
+ }
+ break;
+ }
+
+ case PNG_COLOR_TYPE_RGB_ALPHA:
+ {
+ if (row_info->bit_depth == 8)
+ {
+#ifdef PNG_READ_GAMMA_SUPPORTED
+ if (gamma_to_1 != NULL && gamma_from_1 != NULL &&
+ gamma_table != NULL)
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 4)
+ {
+ png_byte a = *(sp + 3);
+
+ if (a == 0xff)
+ {
+ *sp = gamma_table[*sp];
+ *(sp + 1) = gamma_table[*(sp + 1)];
+ *(sp + 2) = gamma_table[*(sp + 2)];
+ }
+
+ else if (a == 0)
+ {
+ /* Background is already in screen gamma */
+ *sp = (png_byte)png_ptr->background.red;
+ *(sp + 1) = (png_byte)png_ptr->background.green;
+ *(sp + 2) = (png_byte)png_ptr->background.blue;
+ }
+
+ else
+ {
+ png_byte v, w;
+
+ v = gamma_to_1[*sp];
+ png_composite(w, v, a, png_ptr->background_1.red);
+ if (optimize == 0) w = gamma_from_1[w];
+ *sp = w;
+
+ v = gamma_to_1[*(sp + 1)];
+ png_composite(w, v, a, png_ptr->background_1.green);
+ if (optimize == 0) w = gamma_from_1[w];
+ *(sp + 1) = w;
+
+ v = gamma_to_1[*(sp + 2)];
+ png_composite(w, v, a, png_ptr->background_1.blue);
+ if (optimize == 0) w = gamma_from_1[w];
+ *(sp + 2) = w;
+ }
+ }
+ }
+ else
+#endif
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 4)
+ {
+ png_byte a = *(sp + 3);
+
+ if (a == 0)
+ {
+ *sp = (png_byte)png_ptr->background.red;
+ *(sp + 1) = (png_byte)png_ptr->background.green;
+ *(sp + 2) = (png_byte)png_ptr->background.blue;
+ }
+
+ else if (a < 0xff)
+ {
+ png_composite(*sp, *sp, a, png_ptr->background.red);
+
+ png_composite(*(sp + 1), *(sp + 1), a,
+ png_ptr->background.green);
+
+ png_composite(*(sp + 2), *(sp + 2), a,
+ png_ptr->background.blue);
+ }
+ }
+ }
+ }
+ else /* if (row_info->bit_depth == 16) */
+ {
+#ifdef PNG_READ_GAMMA_SUPPORTED
+ if (gamma_16 != NULL && gamma_16_from_1 != NULL &&
+ gamma_16_to_1 != NULL)
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 8)
+ {
+ png_uint_16 a = (png_uint_16)(((png_uint_16)(*(sp + 6))
+ << 8) + (png_uint_16)(*(sp + 7)));
+
+ if (a == (png_uint_16)0xffff)
+ {
+ png_uint_16 v;
+
+ v = gamma_16[*(sp + 1) >> gamma_shift][*sp];
+ *sp = (png_byte)((v >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(v & 0xff);
+
+ v = gamma_16[*(sp + 3) >> gamma_shift][*(sp + 2)];
+ *(sp + 2) = (png_byte)((v >> 8) & 0xff);
+ *(sp + 3) = (png_byte)(v & 0xff);
+
+ v = gamma_16[*(sp + 5) >> gamma_shift][*(sp + 4)];
+ *(sp + 4) = (png_byte)((v >> 8) & 0xff);
+ *(sp + 5) = (png_byte)(v & 0xff);
+ }
+
+ else if (a == 0)
+ {
+ /* Background is already in screen gamma */
+ *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff);
+ *(sp + 2) = (png_byte)((png_ptr->background.green >> 8)
+ & 0xff);
+ *(sp + 3) = (png_byte)(png_ptr->background.green
+ & 0xff);
+ *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8)
+ & 0xff);
+ *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff);
+ }
+
+ else
+ {
+ png_uint_16 v, w;
+
+ v = gamma_16_to_1[*(sp + 1) >> gamma_shift][*sp];
+ png_composite_16(w, v, a, png_ptr->background_1.red);
+ if (optimize == 0)
+ w = gamma_16_from_1[((w & 0xff) >> gamma_shift)][w >>
+ 8];
+ *sp = (png_byte)((w >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(w & 0xff);
+
+ v = gamma_16_to_1[*(sp + 3) >> gamma_shift][*(sp + 2)];
+ png_composite_16(w, v, a, png_ptr->background_1.green);
+ if (optimize == 0)
+ w = gamma_16_from_1[((w & 0xff) >> gamma_shift)][w >>
+ 8];
+
+ *(sp + 2) = (png_byte)((w >> 8) & 0xff);
+ *(sp + 3) = (png_byte)(w & 0xff);
+
+ v = gamma_16_to_1[*(sp + 5) >> gamma_shift][*(sp + 4)];
+ png_composite_16(w, v, a, png_ptr->background_1.blue);
+ if (optimize == 0)
+ w = gamma_16_from_1[((w & 0xff) >> gamma_shift)][w >>
+ 8];
+
+ *(sp + 4) = (png_byte)((w >> 8) & 0xff);
+ *(sp + 5) = (png_byte)(w & 0xff);
+ }
+ }
+ }
+
+ else
+#endif
+ {
+ sp = row;
+ for (i = 0; i < row_width; i++, sp += 8)
+ {
+ png_uint_16 a = (png_uint_16)(((png_uint_16)(*(sp + 6))
+ << 8) + (png_uint_16)(*(sp + 7)));
+
+ if (a == 0)
+ {
+ *sp = (png_byte)((png_ptr->background.red >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(png_ptr->background.red & 0xff);
+ *(sp + 2) = (png_byte)((png_ptr->background.green >> 8)
+ & 0xff);
+ *(sp + 3) = (png_byte)(png_ptr->background.green
+ & 0xff);
+ *(sp + 4) = (png_byte)((png_ptr->background.blue >> 8)
+ & 0xff);
+ *(sp + 5) = (png_byte)(png_ptr->background.blue & 0xff);
+ }
+
+ else if (a < 0xffff)
+ {
+ png_uint_16 v;
+
+ png_uint_16 r = (png_uint_16)(((*sp) << 8) + *(sp + 1));
+ png_uint_16 g = (png_uint_16)(((*(sp + 2)) << 8)
+ + *(sp + 3));
+ png_uint_16 b = (png_uint_16)(((*(sp + 4)) << 8)
+ + *(sp + 5));
+
+ png_composite_16(v, r, a, png_ptr->background.red);
+ *sp = (png_byte)((v >> 8) & 0xff);
+ *(sp + 1) = (png_byte)(v & 0xff);
+
+ png_composite_16(v, g, a, png_ptr->background.green);
+ *(sp + 2) = (png_byte)((v >> 8) & 0xff);
+ *(sp + 3) = (png_byte)(v & 0xff);
+
+ png_composite_16(v, b, a, png_ptr->background.blue);
+ *(sp + 4) = (png_byte)((v >> 8) & 0xff);
+ *(sp + 5) = (png_byte)(v & 0xff);
+ }
+ }
+ }
+ }
+ break;
+ }
+
+ default:
+ break;
}
}
#endif /* READ_BACKGROUND || READ_ALPHA_MODE */
@@ -4220,8 +4217,8 @@
{
case 1:
{
- sp = row + (png_size_t)((row_width - 1) >> 3);
- dp = row + (png_size_t)row_width - 1;
+ sp = row + (size_t)((row_width - 1) >> 3);
+ dp = row + (size_t)row_width - 1;
shift = 7 - (int)((row_width + 7) & 0x07);
for (i = 0; i < row_width; i++)
{
@@ -4247,8 +4244,8 @@
case 2:
{
- sp = row + (png_size_t)((row_width - 1) >> 2);
- dp = row + (png_size_t)row_width - 1;
+ sp = row + (size_t)((row_width - 1) >> 2);
+ dp = row + (size_t)row_width - 1;
shift = (int)((3 - ((row_width + 3) & 0x03)) << 1);
for (i = 0; i < row_width; i++)
{
@@ -4270,8 +4267,8 @@
case 4:
{
- sp = row + (png_size_t)((row_width - 1) >> 1);
- dp = row + (png_size_t)row_width - 1;
+ sp = row + (size_t)((row_width - 1) >> 1);
+ dp = row + (size_t)row_width - 1;
shift = (int)((row_width & 0x01) << 2);
for (i = 0; i < row_width; i++)
{
@@ -4304,8 +4301,8 @@
{
if (num_trans > 0)
{
- sp = row + (png_size_t)row_width - 1;
- dp = row + ((png_size_t)row_width << 2) - 1;
+ sp = row + (size_t)row_width - 1;
+ dp = row + ((size_t)row_width << 2) - 1;
for (i = 0; i < row_width; i++)
{
@@ -4329,8 +4326,8 @@
else
{
- sp = row + (png_size_t)row_width - 1;
- dp = row + (png_size_t)(row_width * 3) - 1;
+ sp = row + (size_t)row_width - 1;
+ dp = row + (size_t)(row_width * 3) - 1;
for (i = 0; i < row_width; i++)
{
@@ -4365,195 +4362,130 @@
png_debug(1, "in png_do_expand");
+ if (row_info->color_type == PNG_COLOR_TYPE_GRAY)
{
- if (row_info->color_type == PNG_COLOR_TYPE_GRAY)
+ unsigned int gray = trans_color != NULL ? trans_color->gray : 0;
+
+ if (row_info->bit_depth < 8)
{
- unsigned int gray = trans_color != NULL ? trans_color->gray : 0;
-
- if (row_info->bit_depth < 8)
+ switch (row_info->bit_depth)
{
- switch (row_info->bit_depth)
+ case 1:
{
- case 1:
- {
- gray = (gray & 0x01) * 0xff;
- sp = row + (png_size_t)((row_width - 1) >> 3);
- dp = row + (png_size_t)row_width - 1;
- shift = 7 - (int)((row_width + 7) & 0x07);
- for (i = 0; i < row_width; i++)
- {
- if ((*sp >> shift) & 0x01)
- *dp = 0xff;
-
- else
- *dp = 0;
-
- if (shift == 7)
- {
- shift = 0;
- sp--;
- }
-
- else
- shift++;
-
- dp--;
- }
- break;
- }
-
- case 2:
- {
- gray = (gray & 0x03) * 0x55;
- sp = row + (png_size_t)((row_width - 1) >> 2);
- dp = row + (png_size_t)row_width - 1;
- shift = (int)((3 - ((row_width + 3) & 0x03)) << 1);
- for (i = 0; i < row_width; i++)
- {
- value = (*sp >> shift) & 0x03;
- *dp = (png_byte)(value | (value << 2) | (value << 4) |
- (value << 6));
- if (shift == 6)
- {
- shift = 0;
- sp--;
- }
-
- else
- shift += 2;
-
- dp--;
- }
- break;
- }
-
- case 4:
- {
- gray = (gray & 0x0f) * 0x11;
- sp = row + (png_size_t)((row_width - 1) >> 1);
- dp = row + (png_size_t)row_width - 1;
- shift = (int)((1 - ((row_width + 1) & 0x01)) << 2);
- for (i = 0; i < row_width; i++)
- {
- value = (*sp >> shift) & 0x0f;
- *dp = (png_byte)(value | (value << 4));
- if (shift == 4)
- {
- shift = 0;
- sp--;
- }
-
- else
- shift = 4;
-
- dp--;
- }
- break;
- }
-
- default:
- break;
- }
-
- row_info->bit_depth = 8;
- row_info->pixel_depth = 8;
- row_info->rowbytes = row_width;
- }
-
- if (trans_color != NULL)
- {
- if (row_info->bit_depth == 8)
- {
- gray = gray & 0xff;
- sp = row + (png_size_t)row_width - 1;
- dp = row + ((png_size_t)row_width << 1) - 1;
-
+ gray = (gray & 0x01) * 0xff;
+ sp = row + (size_t)((row_width - 1) >> 3);
+ dp = row + (size_t)row_width - 1;
+ shift = 7 - (int)((row_width + 7) & 0x07);
for (i = 0; i < row_width; i++)
{
- if ((*sp & 0xffU) == gray)
- *dp-- = 0;
+ if ((*sp >> shift) & 0x01)
+ *dp = 0xff;
else
- *dp-- = 0xff;
+ *dp = 0;
- *dp-- = *sp--;
- }
- }
-
- else if (row_info->bit_depth == 16)
- {
- unsigned int gray_high = (gray >> 8) & 0xff;
- unsigned int gray_low = gray & 0xff;
- sp = row + row_info->rowbytes - 1;
- dp = row + (row_info->rowbytes << 1) - 1;
- for (i = 0; i < row_width; i++)
- {
- if ((*(sp - 1) & 0xffU) == gray_high &&
- (*(sp) & 0xffU) == gray_low)
+ if (shift == 7)
{
- *dp-- = 0;
- *dp-- = 0;
+ shift = 0;
+ sp--;
}
else
- {
- *dp-- = 0xff;
- *dp-- = 0xff;
- }
+ shift++;
- *dp-- = *sp--;
- *dp-- = *sp--;
+ dp--;
}
+ break;
}
- row_info->color_type = PNG_COLOR_TYPE_GRAY_ALPHA;
- row_info->channels = 2;
- row_info->pixel_depth = (png_byte)(row_info->bit_depth << 1);
- row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth,
- row_width);
+ case 2:
+ {
+ gray = (gray & 0x03) * 0x55;
+ sp = row + (size_t)((row_width - 1) >> 2);
+ dp = row + (size_t)row_width - 1;
+ shift = (int)((3 - ((row_width + 3) & 0x03)) << 1);
+ for (i = 0; i < row_width; i++)
+ {
+ value = (*sp >> shift) & 0x03;
+ *dp = (png_byte)(value | (value << 2) | (value << 4) |
+ (value << 6));
+ if (shift == 6)
+ {
+ shift = 0;
+ sp--;
+ }
+
+ else
+ shift += 2;
+
+ dp--;
+ }
+ break;
+ }
+
+ case 4:
+ {
+ gray = (gray & 0x0f) * 0x11;
+ sp = row + (size_t)((row_width - 1) >> 1);
+ dp = row + (size_t)row_width - 1;
+ shift = (int)((1 - ((row_width + 1) & 0x01)) << 2);
+ for (i = 0; i < row_width; i++)
+ {
+ value = (*sp >> shift) & 0x0f;
+ *dp = (png_byte)(value | (value << 4));
+ if (shift == 4)
+ {
+ shift = 0;
+ sp--;
+ }
+
+ else
+ shift = 4;
+
+ dp--;
+ }
+ break;
+ }
+
+ default:
+ break;
}
+
+ row_info->bit_depth = 8;
+ row_info->pixel_depth = 8;
+ row_info->rowbytes = row_width;
}
- else if (row_info->color_type == PNG_COLOR_TYPE_RGB &&
- trans_color != NULL)
+
+ if (trans_color != NULL)
{
if (row_info->bit_depth == 8)
{
- png_byte red = (png_byte)(trans_color->red & 0xff);
- png_byte green = (png_byte)(trans_color->green & 0xff);
- png_byte blue = (png_byte)(trans_color->blue & 0xff);
- sp = row + (png_size_t)row_info->rowbytes - 1;
- dp = row + ((png_size_t)row_width << 2) - 1;
+ gray = gray & 0xff;
+ sp = row + (size_t)row_width - 1;
+ dp = row + ((size_t)row_width << 1) - 1;
+
for (i = 0; i < row_width; i++)
{
- if (*(sp - 2) == red && *(sp - 1) == green && *(sp) == blue)
+ if ((*sp & 0xffU) == gray)
*dp-- = 0;
else
*dp-- = 0xff;
*dp-- = *sp--;
- *dp-- = *sp--;
- *dp-- = *sp--;
}
}
+
else if (row_info->bit_depth == 16)
{
- png_byte red_high = (png_byte)((trans_color->red >> 8) & 0xff);
- png_byte green_high = (png_byte)((trans_color->green >> 8) & 0xff);
- png_byte blue_high = (png_byte)((trans_color->blue >> 8) & 0xff);
- png_byte red_low = (png_byte)(trans_color->red & 0xff);
- png_byte green_low = (png_byte)(trans_color->green & 0xff);
- png_byte blue_low = (png_byte)(trans_color->blue & 0xff);
+ unsigned int gray_high = (gray >> 8) & 0xff;
+ unsigned int gray_low = gray & 0xff;
sp = row + row_info->rowbytes - 1;
- dp = row + ((png_size_t)row_width << 3) - 1;
+ dp = row + (row_info->rowbytes << 1) - 1;
for (i = 0; i < row_width; i++)
{
- if (*(sp - 5) == red_high &&
- *(sp - 4) == red_low &&
- *(sp - 3) == green_high &&
- *(sp - 2) == green_low &&
- *(sp - 1) == blue_high &&
- *(sp ) == blue_low)
+ if ((*(sp - 1) & 0xffU) == gray_high &&
+ (*(sp) & 0xffU) == gray_low)
{
*dp-- = 0;
*dp-- = 0;
@@ -4567,18 +4499,81 @@
*dp-- = *sp--;
*dp-- = *sp--;
- *dp-- = *sp--;
- *dp-- = *sp--;
- *dp-- = *sp--;
- *dp-- = *sp--;
}
}
- row_info->color_type = PNG_COLOR_TYPE_RGB_ALPHA;
- row_info->channels = 4;
- row_info->pixel_depth = (png_byte)(row_info->bit_depth << 2);
- row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, row_width);
+
+ row_info->color_type = PNG_COLOR_TYPE_GRAY_ALPHA;
+ row_info->channels = 2;
+ row_info->pixel_depth = (png_byte)(row_info->bit_depth << 1);
+ row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth,
+ row_width);
}
}
+ else if (row_info->color_type == PNG_COLOR_TYPE_RGB &&
+ trans_color != NULL)
+ {
+ if (row_info->bit_depth == 8)
+ {
+ png_byte red = (png_byte)(trans_color->red & 0xff);
+ png_byte green = (png_byte)(trans_color->green & 0xff);
+ png_byte blue = (png_byte)(trans_color->blue & 0xff);
+ sp = row + (size_t)row_info->rowbytes - 1;
+ dp = row + ((size_t)row_width << 2) - 1;
+ for (i = 0; i < row_width; i++)
+ {
+ if (*(sp - 2) == red && *(sp - 1) == green && *(sp) == blue)
+ *dp-- = 0;
+
+ else
+ *dp-- = 0xff;
+
+ *dp-- = *sp--;
+ *dp-- = *sp--;
+ *dp-- = *sp--;
+ }
+ }
+ else if (row_info->bit_depth == 16)
+ {
+ png_byte red_high = (png_byte)((trans_color->red >> 8) & 0xff);
+ png_byte green_high = (png_byte)((trans_color->green >> 8) & 0xff);
+ png_byte blue_high = (png_byte)((trans_color->blue >> 8) & 0xff);
+ png_byte red_low = (png_byte)(trans_color->red & 0xff);
+ png_byte green_low = (png_byte)(trans_color->green & 0xff);
+ png_byte blue_low = (png_byte)(trans_color->blue & 0xff);
+ sp = row + row_info->rowbytes - 1;
+ dp = row + ((size_t)row_width << 3) - 1;
+ for (i = 0; i < row_width; i++)
+ {
+ if (*(sp - 5) == red_high &&
+ *(sp - 4) == red_low &&
+ *(sp - 3) == green_high &&
+ *(sp - 2) == green_low &&
+ *(sp - 1) == blue_high &&
+ *(sp ) == blue_low)
+ {
+ *dp-- = 0;
+ *dp-- = 0;
+ }
+
+ else
+ {
+ *dp-- = 0xff;
+ *dp-- = 0xff;
+ }
+
+ *dp-- = *sp--;
+ *dp-- = *sp--;
+ *dp-- = *sp--;
+ *dp-- = *sp--;
+ *dp-- = *sp--;
+ *dp-- = *sp--;
+ }
+ }
+ row_info->color_type = PNG_COLOR_TYPE_RGB_ALPHA;
+ row_info->channels = 4;
+ row_info->pixel_depth = (png_byte)(row_info->bit_depth << 2);
+ row_info->rowbytes = PNG_ROWBYTES(row_info->pixel_depth, row_width);
+ }
}
#endif
@@ -4760,8 +4755,7 @@
&(png_ptr->trans_color));
else
- png_do_expand(row_info, png_ptr->row_buf + 1,
- NULL);
+ png_do_expand(row_info, png_ptr->row_buf + 1, NULL);
}
}
#endif
@@ -4985,7 +4979,7 @@
(png_ptr, /* png_ptr */
row_info, /* row_info: */
/* png_uint_32 width; width of row */
- /* png_size_t rowbytes; number of bytes in row */
+ /* size_t rowbytes; number of bytes in row */
/* png_byte color_type; color type of pixels */
/* png_byte bit_depth; bit depth of samples */
/* png_byte channels; number of channels (1-4) */
diff --git a/pngrutil.c b/pngrutil.c
index 8692933..7001f19 100644
--- a/pngrutil.c
+++ b/pngrutil.c
@@ -1,8 +1,8 @@
/* pngrutil.c - utilities to read a PNG file
*
- * Last changed in libpng 1.6.33 [September 28, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -102,7 +102,7 @@
png_uint_16 (PNGAPI
png_get_uint_16)(png_const_bytep buf)
{
- /* ANSI-C requires an int value to accomodate at least 16 bits so this
+ /* ANSI-C requires an int value to accommodate at least 16 bits so this
* works and allows the compiler not to worry about possible narrowing
* on 32-bit systems. (Pre-ANSI systems did not make integers smaller
* than 16 bits either.)
@@ -120,7 +120,7 @@
void /* PRIVATE */
png_read_sig(png_structrp png_ptr, png_inforp info_ptr)
{
- png_size_t num_checked, num_to_check;
+ size_t num_checked, num_to_check;
/* Exit if the user application does not expect a signature. */
if (png_ptr->sig_bytes >= 8)
@@ -1648,7 +1648,7 @@
int entry_size, i;
png_uint_32 skip = 0;
png_uint_32 dl;
- png_size_t max_dl;
+ size_t max_dl;
png_debug(1, "in png_handle_sPLT");
@@ -1997,6 +1997,15 @@
else if ((png_ptr->color_type & PNG_COLOR_MASK_COLOR) == 0) /* GRAY */
{
+ if (png_ptr->bit_depth <= 8)
+ {
+ if (buf[0] != 0 || buf[1] >= (unsigned int)(1 << png_ptr->bit_depth))
+ {
+ png_chunk_benign_error(png_ptr, "invalid gray level");
+ return;
+ }
+ }
+
background.index = 0;
background.red =
background.green =
@@ -2006,6 +2015,15 @@
else
{
+ if (png_ptr->bit_depth <= 8)
+ {
+ if (buf[0] != 0 || buf[2] != 0 || buf[4] != 0)
+ {
+ png_chunk_benign_error(png_ptr, "invalid color");
+ return;
+ }
+ }
+
background.index = 0;
background.red = png_get_uint_16(buf);
background.green = png_get_uint_16(buf + 2);
@@ -2359,7 +2377,7 @@
png_handle_sCAL(png_structrp png_ptr, png_inforp info_ptr, png_uint_32 length)
{
png_bytep buffer;
- png_size_t i;
+ size_t i;
int state;
png_debug(1, "in png_handle_sCAL");
@@ -2429,7 +2447,7 @@
else
{
- png_size_t heighti = i;
+ size_t heighti = i;
state = 0;
if (png_check_fp_number((png_const_charp)buffer, length,
@@ -2867,7 +2885,7 @@
{
PNG_CSTRING_FROM_CHUNK(png_ptr->unknown_chunk.name, png_ptr->chunk_name);
/* The following is safe because of the PNG_SIZE_MAX init above */
- png_ptr->unknown_chunk.size = (png_size_t)length/*SAFE*/;
+ png_ptr->unknown_chunk.size = (size_t)length/*SAFE*/;
/* 'mode' is a flag array, only the bottom four bits matter here */
png_ptr->unknown_chunk.location = (png_byte)png_ptr->mode/*SAFE*/;
@@ -3149,10 +3167,13 @@
{
png_alloc_size_t idat_limit = PNG_UINT_31_MAX;
size_t row_factor =
- (png_ptr->width * png_ptr->channels * (png_ptr->bit_depth > 8? 2: 1)
- + 1 + (png_ptr->interlaced? 6: 0));
+ (size_t)png_ptr->width
+ * (size_t)png_ptr->channels
+ * (png_ptr->bit_depth > 8? 2: 1)
+ + 1
+ + (png_ptr->interlaced? 6: 0);
if (png_ptr->height > PNG_UINT_32_MAX/row_factor)
- idat_limit=PNG_UINT_31_MAX;
+ idat_limit = PNG_UINT_31_MAX;
else
idat_limit = png_ptr->height * row_factor;
row_factor = row_factor > 32566? 32566 : row_factor;
@@ -3679,8 +3700,8 @@
{
case 1:
{
- png_bytep sp = row + (png_size_t)((row_info->width - 1) >> 3);
- png_bytep dp = row + (png_size_t)((final_width - 1) >> 3);
+ png_bytep sp = row + (size_t)((row_info->width - 1) >> 3);
+ png_bytep dp = row + (size_t)((final_width - 1) >> 3);
unsigned int sshift, dshift;
unsigned int s_start, s_end;
int s_inc;
@@ -3806,8 +3827,8 @@
case 4:
{
- png_bytep sp = row + (png_size_t)((row_info->width - 1) >> 1);
- png_bytep dp = row + (png_size_t)((final_width - 1) >> 1);
+ png_bytep sp = row + (size_t)((row_info->width - 1) >> 1);
+ png_bytep dp = row + (size_t)((final_width - 1) >> 1);
unsigned int sshift, dshift;
unsigned int s_start, s_end;
int s_inc;
@@ -3869,12 +3890,12 @@
default:
{
- png_size_t pixel_bytes = (row_info->pixel_depth >> 3);
+ size_t pixel_bytes = (row_info->pixel_depth >> 3);
- png_bytep sp = row + (png_size_t)(row_info->width - 1)
+ png_bytep sp = row + (size_t)(row_info->width - 1)
* pixel_bytes;
- png_bytep dp = row + (png_size_t)(final_width - 1) * pixel_bytes;
+ png_bytep dp = row + (size_t)(final_width - 1) * pixel_bytes;
int jstop = (int)png_pass_inc[pass];
png_uint_32 i;
@@ -3911,8 +3932,8 @@
png_read_filter_row_sub(png_row_infop row_info, png_bytep row,
png_const_bytep prev_row)
{
- png_size_t i;
- png_size_t istop = row_info->rowbytes;
+ size_t i;
+ size_t istop = row_info->rowbytes;
unsigned int bpp = (row_info->pixel_depth + 7) >> 3;
png_bytep rp = row + bpp;
@@ -3929,8 +3950,8 @@
png_read_filter_row_up(png_row_infop row_info, png_bytep row,
png_const_bytep prev_row)
{
- png_size_t i;
- png_size_t istop = row_info->rowbytes;
+ size_t i;
+ size_t istop = row_info->rowbytes;
png_bytep rp = row;
png_const_bytep pp = prev_row;
@@ -3945,11 +3966,11 @@
png_read_filter_row_avg(png_row_infop row_info, png_bytep row,
png_const_bytep prev_row)
{
- png_size_t i;
+ size_t i;
png_bytep rp = row;
png_const_bytep pp = prev_row;
unsigned int bpp = (row_info->pixel_depth + 7) >> 3;
- png_size_t istop = row_info->rowbytes - bpp;
+ size_t istop = row_info->rowbytes - bpp;
for (i = 0; i < bpp; i++)
{
@@ -4385,7 +4406,7 @@
static PNG_CONST png_byte png_pass_yinc[7] = {8, 8, 8, 4, 4, 2, 2};
unsigned int max_pixel_depth;
- png_size_t row_bytes;
+ size_t row_bytes;
png_debug(1, "in png_read_start_row");
diff --git a/pngset.c b/pngset.c
index 6f3a1ee..7cf54d9 100644
--- a/pngset.c
+++ b/pngset.c
@@ -1,8 +1,8 @@
/* pngset.c - storage of image information into info struct
*
- * Last changed in libpng 1.6.32 [August 24, 2017]
- * Copyright (c) 1998-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -313,7 +313,7 @@
png_const_charp purpose, png_int_32 X0, png_int_32 X1, int type,
int nparams, png_const_charp units, png_charpp params)
{
- png_size_t length;
+ size_t length;
int i;
png_debug1(1, "in %s storage function", "pCAL");
@@ -390,7 +390,7 @@
memcpy(info_ptr->pcal_units, units, length);
info_ptr->pcal_params = png_voidcast(png_charpp, png_malloc_warn(png_ptr,
- (png_size_t)(((unsigned int)nparams + 1) * (sizeof (png_charp)))));
+ (size_t)(((unsigned int)nparams + 1) * (sizeof (png_charp)))));
if (info_ptr->pcal_params == NULL)
{
@@ -430,7 +430,7 @@
png_set_sCAL_s(png_const_structrp png_ptr, png_inforp info_ptr,
int unit, png_const_charp swidth, png_const_charp sheight)
{
- png_size_t lengthw = 0, lengthh = 0;
+ size_t lengthw = 0, lengthh = 0;
png_debug1(1, "in %s storage function", "sCAL");
@@ -691,7 +691,7 @@
{
png_charp new_iccp_name;
png_bytep new_iccp_profile;
- png_size_t length;
+ size_t length;
png_debug1(1, "in %s storage function", "iCCP");
@@ -1018,7 +1018,7 @@
/* Changed from num_trans to PNG_MAX_PALETTE_LENGTH in version 1.2.1 */
info_ptr->trans_alpha = png_voidcast(png_bytep,
png_malloc(png_ptr, PNG_MAX_PALETTE_LENGTH));
- memcpy(info_ptr->trans_alpha, trans_alpha, (png_size_t)num_trans);
+ memcpy(info_ptr->trans_alpha, trans_alpha, (size_t)num_trans);
}
png_ptr->trans_alpha = info_ptr->trans_alpha;
}
@@ -1098,7 +1098,7 @@
do
{
- png_size_t length;
+ size_t length;
/* Skip invalid input entries */
if (entries->name == NULL || entries->entries == NULL)
@@ -1563,7 +1563,7 @@
#endif
void PNGAPI
-png_set_compression_buffer_size(png_structrp png_ptr, png_size_t size)
+png_set_compression_buffer_size(png_structrp png_ptr, size_t size)
{
if (png_ptr == NULL)
return;
diff --git a/pngstruct.h b/pngstruct.h
index d83f971..699e8ac 100644
--- a/pngstruct.h
+++ b/pngstruct.h
@@ -1,8 +1,8 @@
/* pngstruct.h - header file for PNG reference library
*
- * Last changed in libpng 1.6.32 [August 24, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -47,7 +47,7 @@
/* zlib.h declares a magic type 'uInt' that limits the amount of data that zlib
* can handle at once. This type need be no larger than 16 bits (so maximum of
* 65535), this define allows us to discover how big it is, but limited by the
- * maximuum for png_size_t. The value can be overriden in a library build
+ * maximum for size_t. The value can be overridden in a library build
* (pngusr.h, or set it in CPPFLAGS) and it works to set it to a considerably
* lower value (e.g. 255 works). A lower value may help memory usage (slightly)
* and may even improve performance on some systems (and degrade it on others.)
@@ -214,7 +214,7 @@
png_uint_32 height; /* height of image in pixels */
png_uint_32 num_rows; /* number of rows in current pass */
png_uint_32 usr_width; /* width of row at start of write */
- png_size_t rowbytes; /* size of row in bytes */
+ size_t rowbytes; /* size of row in bytes */
png_uint_32 iwidth; /* width of current interlaced row in pixels */
png_uint_32 row_number; /* current row in interlace pass */
png_uint_32 chunk_name; /* PNG_CHUNK() id of current chunk */
@@ -232,7 +232,7 @@
png_bytep try_row; /* buffer to save trial row when filtering */
png_bytep tst_row; /* buffer to save best trial row when filtering */
#endif
- png_size_t info_rowbytes; /* Added in 1.5.4: cache of updated row bytes */
+ size_t info_rowbytes; /* Added in 1.5.4: cache of updated row bytes */
png_uint_32 idat_size; /* current IDAT size for read */
png_uint_32 crc; /* current chunk CRC value */
@@ -307,7 +307,7 @@
#endif
#if defined(PNG_READ_SHIFT_SUPPORTED) || defined(PNG_WRITE_SHIFT_SUPPORTED)
- png_color_8 shift; /* shift for significant bit tranformation */
+ png_color_8 shift; /* shift for significant bit transformation */
#endif
#if defined(PNG_tRNS_SUPPORTED) || defined(PNG_READ_BACKGROUND_SUPPORTED) \
@@ -328,10 +328,10 @@
png_bytep current_buffer; /* buffer for recently used data */
png_uint_32 push_length; /* size of current input chunk */
png_uint_32 skip_length; /* bytes to skip in input data */
- png_size_t save_buffer_size; /* amount of data now in save_buffer */
- png_size_t save_buffer_max; /* total size of save_buffer */
- png_size_t buffer_size; /* total amount of available input data */
- png_size_t current_buffer_size; /* amount of data now in current_buffer */
+ size_t save_buffer_size; /* amount of data now in save_buffer */
+ size_t save_buffer_max; /* total size of save_buffer */
+ size_t buffer_size; /* total amount of available input data */
+ size_t current_buffer_size; /* amount of data now in current_buffer */
int process_mode; /* what push library is currently doing */
int cur_palette; /* current push library palette index */
@@ -451,7 +451,7 @@
#endif
/* New member added in libpng-1.2.26 */
- png_size_t old_big_row_buf_size;
+ size_t old_big_row_buf_size;
#ifdef PNG_READ_SUPPORTED
/* New member added in libpng-1.2.30 */
diff --git a/pngtest.c b/pngtest.c
index 9d50757..4411fd9 100644
--- a/pngtest.c
+++ b/pngtest.c
@@ -1,8 +1,8 @@
/* pngtest.c - a simple test program to test libpng
*
- * Last changed in libpng 1.6.32 [August 24, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -345,10 +345,10 @@
#ifdef PNG_IO_STATE_SUPPORTED
void
-pngtest_check_io_state(png_structp png_ptr, png_size_t data_length,
+pngtest_check_io_state(png_structp png_ptr, size_t data_length,
png_uint_32 io_op);
void
-pngtest_check_io_state(png_structp png_ptr, png_size_t data_length,
+pngtest_check_io_state(png_structp png_ptr, size_t data_length,
png_uint_32 io_op)
{
png_uint_32 io_state = png_get_io_state(png_ptr);
@@ -386,12 +386,12 @@
#endif
static void PNGCBAPI
-pngtest_read_data(png_structp png_ptr, png_bytep data, png_size_t length)
+pngtest_read_data(png_structp png_ptr, png_bytep data, size_t length)
{
- png_size_t check = 0;
+ size_t check = 0;
png_voidp io_ptr;
- /* fread() returns 0 on error, so it is OK to store this in a png_size_t
+ /* fread() returns 0 on error, so it is OK to store this in a size_t
* instead of an int, which is what fread() actually returns.
*/
io_ptr = png_get_io_ptr(png_ptr);
@@ -425,9 +425,9 @@
* than changing the library.
*/
static void PNGCBAPI
-pngtest_write_data(png_structp png_ptr, png_bytep data, png_size_t length)
+pngtest_write_data(png_structp png_ptr, png_bytep data, size_t length)
{
- png_size_t check;
+ size_t check;
check = fwrite(data, 1, length, (png_FILE_p)png_get_io_ptr(png_ptr));
@@ -705,7 +705,7 @@
* The unknown chunk structure contains the chunk data:
* png_byte name[5];
* png_byte *data;
- * png_size_t size;
+ * size_t size;
*
* Note that libpng has already taken care of the CRC handling.
*/
@@ -1726,7 +1726,7 @@
for (;;)
{
static int wrote_question = 0;
- png_size_t num_in, num_out;
+ size_t num_in, num_out;
char inbuf[256], outbuf[256];
num_in = fread(inbuf, 1, sizeof inbuf, fpin);
@@ -2153,4 +2153,4 @@
#endif
/* Generate a compiler error if there is an old png.h in the search path. */
-typedef png_libpng_version_1_6_34 Your_png_h_is_not_version_1_6_34;
+typedef png_libpng_version_1_6_35 Your_png_h_is_not_version_1_6_35;
diff --git a/pngtrans.c b/pngtrans.c
index 6882f0f..de84aa6 100644
--- a/pngtrans.c
+++ b/pngtrans.c
@@ -1,8 +1,8 @@
/* pngtrans.c - transforms the data in a row (used by both readers and writers)
*
- * Last changed in libpng 1.6.33 [September 28, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -269,8 +269,8 @@
if (row_info->color_type == PNG_COLOR_TYPE_GRAY)
{
png_bytep rp = row;
- png_size_t i;
- png_size_t istop = row_info->rowbytes;
+ size_t i;
+ size_t istop = row_info->rowbytes;
for (i = 0; i < istop; i++)
{
@@ -283,8 +283,8 @@
row_info->bit_depth == 8)
{
png_bytep rp = row;
- png_size_t i;
- png_size_t istop = row_info->rowbytes;
+ size_t i;
+ size_t istop = row_info->rowbytes;
for (i = 0; i < istop; i += 2)
{
@@ -298,8 +298,8 @@
row_info->bit_depth == 16)
{
png_bytep rp = row;
- png_size_t i;
- png_size_t istop = row_info->rowbytes;
+ size_t i;
+ size_t istop = row_info->rowbytes;
for (i = 0; i < istop; i += 4)
{
@@ -609,7 +609,7 @@
return; /* The filler channel has gone already */
/* Fix the rowbytes value. */
- row_info->rowbytes = (png_size_t)(dp-row);
+ row_info->rowbytes = (size_t)(dp-row);
}
#endif
diff --git a/pngwio.c b/pngwio.c
index 37c7c3a..e539168 100644
--- a/pngwio.c
+++ b/pngwio.c
@@ -1,8 +1,8 @@
/* pngwio.c - functions for data output
*
- * Last changed in libpng 1.6.24 [August 4, 2016]
- * Copyright (c) 1998-2002,2004,2006-2014,2016 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2014,2016,2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -30,7 +30,7 @@
*/
void /* PRIVATE */
-png_write_data(png_structrp png_ptr, png_const_bytep data, png_size_t length)
+png_write_data(png_structrp png_ptr, png_const_bytep data, size_t length)
{
/* NOTE: write_data_fn must not change the buffer! */
if (png_ptr->write_data_fn != NULL )
@@ -48,9 +48,9 @@
* than changing the library.
*/
void PNGCBAPI
-png_default_write_data(png_structp png_ptr, png_bytep data, png_size_t length)
+png_default_write_data(png_structp png_ptr, png_bytep data, size_t length)
{
- png_size_t check;
+ size_t check;
if (png_ptr == NULL)
return;
diff --git a/pngwrite.c b/pngwrite.c
index a16d77c..5bd87f3 100644
--- a/pngwrite.c
+++ b/pngwrite.c
@@ -1,8 +1,8 @@
/* pngwrite.c - general routines to write a PNG file
*
- * Last changed in libpng 1.6.32 [August 24, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -1636,7 +1636,7 @@
* calculation can be done to 15 bits of accuracy; however, the output needs to
* be scaled in the range 0..255*65535, so include that scaling here.
*/
-# define UNP_RECIPROCAL(alpha) ((((0xffff*0xff)<<7)+(alpha>>1))/alpha)
+# define UNP_RECIPROCAL(alpha) ((((0xffff*0xff)<<7)+((alpha)>>1))/(alpha))
static png_byte
png_unpremultiply(png_uint_32 component, png_uint_32 alpha,
@@ -2162,8 +2162,7 @@
static void (PNGCBAPI
-image_memory_write)(png_structp png_ptr, png_bytep/*const*/ data,
- png_size_t size)
+image_memory_write)(png_structp png_ptr, png_bytep/*const*/ data, size_t size)
{
png_image_write_control *display = png_voidcast(png_image_write_control*,
png_ptr->io_ptr/*backdoor: png_get_io_ptr(png_ptr)*/);
diff --git a/pngwtran.c b/pngwtran.c
index 377b43e..3a1e0a2 100644
--- a/pngwtran.c
+++ b/pngwtran.c
@@ -1,8 +1,8 @@
/* pngwtran.c - transforms the data in a row for PNG writers
*
- * Last changed in libpng 1.6.26 [October 20, 2016]
- * Copyright (c) 1998-2002,2004,2006-2016 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2016,2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -212,9 +212,9 @@
if (row_info->bit_depth < 8)
{
png_bytep bp = row;
- png_size_t i;
+ size_t i;
unsigned int mask;
- png_size_t row_bytes = row_info->rowbytes;
+ size_t row_bytes = row_info->rowbytes;
if (bit_depth->gray == 1 && row_info->bit_depth == 2)
mask = 0x55;
@@ -514,7 +514,7 @@
(png_ptr, /* png_ptr */
row_info, /* row_info: */
/* png_uint_32 width; width of row */
- /* png_size_t rowbytes; number of bytes in row */
+ /* size_t rowbytes; number of bytes in row */
/* png_byte color_type; color type of pixels */
/* png_byte bit_depth; bit depth of samples */
/* png_byte channels; number of channels (1-4) */
diff --git a/pngwutil.c b/pngwutil.c
index 0d4fb13..ab431e7 100644
--- a/pngwutil.c
+++ b/pngwutil.c
@@ -1,8 +1,8 @@
/* pngwutil.c - utilities to write a PNG file
*
- * Last changed in libpng 1.6.32 [August 24, 2017]
- * Copyright (c) 1998-2002,2004,2006-2017 Glenn Randers-Pehrson
+ * Last changed in libpng 1.6.35 [July 15, 2018]
+ * Copyright (c) 1998-2002,2004,2006-2018 Glenn Randers-Pehrson
* (Version 0.96 Copyright (c) 1996, 1997 Andreas Dilger)
* (Version 0.88 Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc.)
*
@@ -59,7 +59,7 @@
/* Write the rest of the 8 byte signature */
png_write_data(png_ptr, &png_signature[png_ptr->sig_bytes],
- (png_size_t)(8 - png_ptr->sig_bytes));
+ (size_t)(8 - png_ptr->sig_bytes));
if (png_ptr->sig_bytes < 3)
png_ptr->mode |= PNG_HAVE_PNG_SIGNATURE;
@@ -124,8 +124,7 @@
* given to png_write_chunk_header().
*/
void PNGAPI
-png_write_chunk_data(png_structrp png_ptr, png_const_bytep data,
- png_size_t length)
+png_write_chunk_data(png_structrp png_ptr, png_const_bytep data, size_t length)
{
/* Write the data, and run the CRC over it */
if (png_ptr == NULL)
@@ -160,7 +159,7 @@
/* Write the crc in a single operation */
png_save_uint_32(buf, png_ptr->crc);
- png_write_data(png_ptr, buf, (png_size_t)4);
+ png_write_data(png_ptr, buf, 4);
}
/* Write a PNG chunk all at once. The type is an array of ASCII characters
@@ -174,7 +173,7 @@
*/
static void
png_write_complete_chunk(png_structrp png_ptr, png_uint_32 chunk_name,
- png_const_bytep data, png_size_t length)
+ png_const_bytep data, size_t length)
{
if (png_ptr == NULL)
return;
@@ -191,7 +190,7 @@
/* This is the API that calls the internal function above. */
void PNGAPI
png_write_chunk(png_structrp png_ptr, png_const_bytep chunk_string,
- png_const_bytep data, png_size_t length)
+ png_const_bytep data, size_t length)
{
png_write_complete_chunk(png_ptr, PNG_CHUNK_FROM_STRING(chunk_string), data,
length);
@@ -820,7 +819,7 @@
buf[12] = (png_byte)interlace_type;
/* Write the chunk */
- png_write_complete_chunk(png_ptr, png_IHDR, buf, (png_size_t)13);
+ png_write_complete_chunk(png_ptr, png_IHDR, buf, 13);
if ((png_ptr->do_filter) == PNG_NO_FILTERS)
{
@@ -889,7 +888,7 @@
buf[0] = pal_ptr->red;
buf[1] = pal_ptr->green;
buf[2] = pal_ptr->blue;
- png_write_chunk_data(png_ptr, buf, (png_size_t)3);
+ png_write_chunk_data(png_ptr, buf, 3);
}
#else
@@ -903,7 +902,7 @@
buf[0] = pal_ptr[i].red;
buf[1] = pal_ptr[i].green;
buf[2] = pal_ptr[i].blue;
- png_write_chunk_data(png_ptr, buf, (png_size_t)3);
+ png_write_chunk_data(png_ptr, buf, 3);
}
#endif
@@ -1075,7 +1074,7 @@
{
png_debug(1, "in png_write_IEND");
- png_write_complete_chunk(png_ptr, png_IEND, NULL, (png_size_t)0);
+ png_write_complete_chunk(png_ptr, png_IEND, NULL, 0);
png_ptr->mode |= PNG_HAVE_IEND;
}
@@ -1090,7 +1089,7 @@
/* file_gamma is saved in 1/100,000ths */
png_save_uint_32(buf, (png_uint_32)file_gamma);
- png_write_complete_chunk(png_ptr, png_gAMA, buf, (png_size_t)4);
+ png_write_complete_chunk(png_ptr, png_gAMA, buf, 4);
}
#endif
@@ -1108,7 +1107,7 @@
"Invalid sRGB rendering intent specified");
buf[0]=(png_byte)srgb_intent;
- png_write_complete_chunk(png_ptr, png_sRGB, buf, (png_size_t)1);
+ png_write_complete_chunk(png_ptr, png_sRGB, buf, 1);
}
#endif
@@ -1182,8 +1181,8 @@
png_uint_32 name_len;
png_byte new_name[80];
png_byte entrybuf[10];
- png_size_t entry_size = (spalette->depth == 8 ? 6 : 10);
- png_size_t palette_size = entry_size * (png_size_t)spalette->nentries;
+ size_t entry_size = (spalette->depth == 8 ? 6 : 10);
+ size_t palette_size = entry_size * (size_t)spalette->nentries;
png_sPLT_entryp ep;
#ifndef PNG_POINTER_INDEXING_SUPPORTED
int i;
@@ -1200,10 +1199,9 @@
png_write_chunk_header(png_ptr, png_sPLT,
(png_uint_32)(name_len + 2 + palette_size));
- png_write_chunk_data(png_ptr, (png_bytep)new_name,
- (png_size_t)(name_len + 1));
+ png_write_chunk_data(png_ptr, (png_bytep)new_name, (size_t)(name_len + 1));
- png_write_chunk_data(png_ptr, &spalette->depth, (png_size_t)1);
+ png_write_chunk_data(png_ptr, &spalette->depth, 1);
/* Loop through each palette entry, writing appropriately */
#ifdef PNG_POINTER_INDEXING_SUPPORTED
@@ -1265,7 +1263,7 @@
png_write_sBIT(png_structrp png_ptr, png_const_color_8p sbit, int color_type)
{
png_byte buf[4];
- png_size_t size;
+ size_t size;
png_debug(1, "in png_write_sBIT");
@@ -1365,7 +1363,7 @@
/* Write the chunk out as it is */
png_write_complete_chunk(png_ptr, png_tRNS, trans_alpha,
- (png_size_t)num_trans);
+ (size_t)num_trans);
}
else if (color_type == PNG_COLOR_TYPE_GRAY)
@@ -1380,7 +1378,7 @@
}
png_save_uint_16(buf, tran->gray);
- png_write_complete_chunk(png_ptr, png_tRNS, buf, (png_size_t)2);
+ png_write_complete_chunk(png_ptr, png_tRNS, buf, 2);
}
else if (color_type == PNG_COLOR_TYPE_RGB)
@@ -1400,7 +1398,7 @@
return;
}
- png_write_complete_chunk(png_ptr, png_tRNS, buf, (png_size_t)6);
+ png_write_complete_chunk(png_ptr, png_tRNS, buf, 6);
}
else
@@ -1433,7 +1431,7 @@
}
buf[0] = back->index;
- png_write_complete_chunk(png_ptr, png_bKGD, buf, (png_size_t)1);
+ png_write_complete_chunk(png_ptr, png_bKGD, buf, 1);
}
else if ((color_type & PNG_COLOR_MASK_COLOR) != 0)
@@ -1454,7 +1452,7 @@
return;
}
- png_write_complete_chunk(png_ptr, png_bKGD, buf, (png_size_t)6);
+ png_write_complete_chunk(png_ptr, png_bKGD, buf, 6);
}
else
@@ -1468,7 +1466,7 @@
}
png_save_uint_16(buf, back->gray);
- png_write_complete_chunk(png_ptr, png_bKGD, buf, (png_size_t)2);
+ png_write_complete_chunk(png_ptr, png_bKGD, buf, 2);
}
}
#endif
@@ -1488,7 +1486,7 @@
for (i = 0; i < num_exif; i++)
{
buf[0] = exif[i];
- png_write_chunk_data(png_ptr, buf, (png_size_t)1);
+ png_write_chunk_data(png_ptr, buf, 1);
}
png_write_chunk_end(png_ptr);
@@ -1519,7 +1517,7 @@
for (i = 0; i < num_hist; i++)
{
png_save_uint_16(buf, hist[i]);
- png_write_chunk_data(png_ptr, buf, (png_size_t)2);
+ png_write_chunk_data(png_ptr, buf, 2);
}
png_write_chunk_end(png_ptr);
@@ -1530,7 +1528,7 @@
/* Write a tEXt chunk */
void /* PRIVATE */
png_write_tEXt(png_structrp png_ptr, png_const_charp key, png_const_charp text,
- png_size_t text_len)
+ size_t text_len)
{
png_uint_32 key_len;
png_byte new_key[80];
@@ -1627,7 +1625,7 @@
png_const_charp lang, png_const_charp lang_key, png_const_charp text)
{
png_uint_32 key_len, prefix_len;
- png_size_t lang_len, lang_key_len;
+ size_t lang_len, lang_key_len;
png_byte new_key[82];
compression_state comp;
@@ -1737,7 +1735,7 @@
png_save_int_32(buf + 4, y_offset);
buf[8] = (png_byte)unit_type;
- png_write_complete_chunk(png_ptr, png_oFFs, buf, (png_size_t)9);
+ png_write_complete_chunk(png_ptr, png_oFFs, buf, 9);
}
#endif
#ifdef PNG_WRITE_pCAL_SUPPORTED
@@ -1748,7 +1746,7 @@
png_charpp params)
{
png_uint_32 purpose_len;
- png_size_t units_len, total_len;
+ size_t units_len, total_len;
png_size_tp params_len;
png_byte buf[10];
png_byte new_purpose[80];
@@ -1772,7 +1770,7 @@
total_len = purpose_len + units_len + 10;
params_len = (png_size_tp)png_malloc(png_ptr,
- (png_alloc_size_t)((png_alloc_size_t)nparams * (sizeof (png_size_t))));
+ (png_alloc_size_t)((png_alloc_size_t)nparams * (sizeof (size_t))));
/* Find the length of each parameter, making sure we don't count the
* null terminator for the last parameter.
@@ -1792,8 +1790,8 @@
png_save_int_32(buf + 4, X1);
buf[8] = (png_byte)type;
buf[9] = (png_byte)nparams;
- png_write_chunk_data(png_ptr, buf, (png_size_t)10);
- png_write_chunk_data(png_ptr, (png_const_bytep)units, (png_size_t)units_len);
+ png_write_chunk_data(png_ptr, buf, 10);
+ png_write_chunk_data(png_ptr, (png_const_bytep)units, (size_t)units_len);
for (i = 0; i < nparams; i++)
{
@@ -1812,7 +1810,7 @@
png_const_charp height)
{
png_byte buf[64];
- png_size_t wlen, hlen, total_len;
+ size_t wlen, hlen, total_len;
png_debug(1, "in png_write_sCAL_s");
@@ -1853,7 +1851,7 @@
png_save_uint_32(buf + 4, y_pixels_per_unit);
buf[8] = (png_byte)unit_type;
- png_write_complete_chunk(png_ptr, png_pHYs, buf, (png_size_t)9);
+ png_write_complete_chunk(png_ptr, png_pHYs, buf, 9);
}
#endif
@@ -1883,7 +1881,7 @@
buf[5] = mod_time->minute;
buf[6] = mod_time->second;
- png_write_complete_chunk(png_ptr, png_tIME, buf, (png_size_t)7);
+ png_write_complete_chunk(png_ptr, png_tIME, buf, 7);
}
#endif
@@ -2073,8 +2071,8 @@
{
if (png_ptr->prev_row != NULL)
memset(png_ptr->prev_row, 0,
- (png_size_t)(PNG_ROWBYTES(png_ptr->usr_channels*
- png_ptr->usr_bit_depth, png_ptr->width)) + 1);
+ PNG_ROWBYTES(png_ptr->usr_channels *
+ png_ptr->usr_bit_depth, png_ptr->width) + 1);
return;
}
@@ -2130,7 +2128,7 @@
for (i = png_pass_start[pass]; i < row_width;
i += png_pass_inc[pass])
{
- sp = row + (png_size_t)(i >> 3);
+ sp = row + (size_t)(i >> 3);
value = (int)(*sp >> (7 - (int)(i & 0x07))) & 0x01;
d |= (value << shift);
@@ -2168,7 +2166,7 @@
for (i = png_pass_start[pass]; i < row_width;
i += png_pass_inc[pass])
{
- sp = row + (png_size_t)(i >> 2);
+ sp = row + (size_t)(i >> 2);
value = (*sp >> ((3 - (int)(i & 0x03)) << 1)) & 0x03;
d |= (value << shift);
@@ -2204,7 +2202,7 @@
for (i = png_pass_start[pass]; i < row_width;
i += png_pass_inc[pass])
{
- sp = row + (png_size_t)(i >> 1);
+ sp = row + (size_t)(i >> 1);
value = (*sp >> ((1 - (int)(i & 0x01)) << 2)) & 0x0f;
d |= (value << shift);
@@ -2230,7 +2228,7 @@
png_bytep dp;
png_uint_32 i;
png_uint_32 row_width = row_info->width;
- png_size_t pixel_bytes;
+ size_t pixel_bytes;
/* Start at the beginning */
dp = row;
@@ -2243,7 +2241,7 @@
i += png_pass_inc[pass])
{
/* Find out where the original pixel is */
- sp = row + (png_size_t)i * pixel_bytes;
+ sp = row + (size_t)i * pixel_bytes;
/* Move the pixel */
if (dp != sp)
@@ -2274,16 +2272,16 @@
*/
static void /* PRIVATE */
png_write_filtered_row(png_structrp png_ptr, png_bytep filtered_row,
- png_size_t row_bytes);
+ size_t row_bytes);
#ifdef PNG_WRITE_FILTER_SUPPORTED
-static png_size_t /* PRIVATE */
+static size_t /* PRIVATE */
png_setup_sub_row(png_structrp png_ptr, const png_uint_32 bpp,
- const png_size_t row_bytes, const png_size_t lmins)
+ size_t row_bytes, size_t lmins)
{
png_bytep rp, dp, lp;
- png_size_t i;
- png_size_t sum = 0;
+ size_t i;
+ size_t sum = 0;
unsigned int v;
png_ptr->try_row[0] = PNG_FILTER_VALUE_SUB;
@@ -2318,10 +2316,10 @@
static void /* PRIVATE */
png_setup_sub_row_only(png_structrp png_ptr, const png_uint_32 bpp,
- const png_size_t row_bytes)
+ size_t row_bytes)
{
png_bytep rp, dp, lp;
- png_size_t i;
+ size_t i;
png_ptr->try_row[0] = PNG_FILTER_VALUE_SUB;
@@ -2338,13 +2336,12 @@
}
}
-static png_size_t /* PRIVATE */
-png_setup_up_row(png_structrp png_ptr, const png_size_t row_bytes,
- const png_size_t lmins)
+static size_t /* PRIVATE */
+png_setup_up_row(png_structrp png_ptr, size_t row_bytes, size_t lmins)
{
png_bytep rp, dp, pp;
- png_size_t i;
- png_size_t sum = 0;
+ size_t i;
+ size_t sum = 0;
unsigned int v;
png_ptr->try_row[0] = PNG_FILTER_VALUE_UP;
@@ -2367,10 +2364,10 @@
return (sum);
}
static void /* PRIVATE */
-png_setup_up_row_only(png_structrp png_ptr, const png_size_t row_bytes)
+png_setup_up_row_only(png_structrp png_ptr, size_t row_bytes)
{
png_bytep rp, dp, pp;
- png_size_t i;
+ size_t i;
png_ptr->try_row[0] = PNG_FILTER_VALUE_UP;
@@ -2382,13 +2379,13 @@
}
}
-static png_size_t /* PRIVATE */
+static size_t /* PRIVATE */
png_setup_avg_row(png_structrp png_ptr, const png_uint_32 bpp,
- const png_size_t row_bytes, const png_size_t lmins)
+ size_t row_bytes, size_t lmins)
{
png_bytep rp, dp, pp, lp;
png_uint_32 i;
- png_size_t sum = 0;
+ size_t sum = 0;
unsigned int v;
png_ptr->try_row[0] = PNG_FILTER_VALUE_AVG;
@@ -2424,7 +2421,7 @@
}
static void /* PRIVATE */
png_setup_avg_row_only(png_structrp png_ptr, const png_uint_32 bpp,
- const png_size_t row_bytes)
+ size_t row_bytes)
{
png_bytep rp, dp, pp, lp;
png_uint_32 i;
@@ -2444,13 +2441,13 @@
}
}
-static png_size_t /* PRIVATE */
+static size_t /* PRIVATE */
png_setup_paeth_row(png_structrp png_ptr, const png_uint_32 bpp,
- const png_size_t row_bytes, const png_size_t lmins)
+ size_t row_bytes, size_t lmins)
{
png_bytep rp, dp, pp, cp, lp;
- png_size_t i;
- png_size_t sum = 0;
+ size_t i;
+ size_t sum = 0;
unsigned int v;
png_ptr->try_row[0] = PNG_FILTER_VALUE_PAETH;
@@ -2507,10 +2504,10 @@
}
static void /* PRIVATE */
png_setup_paeth_row_only(png_structrp png_ptr, const png_uint_32 bpp,
- const png_size_t row_bytes)
+ size_t row_bytes)
{
png_bytep rp, dp, pp, cp, lp;
- png_size_t i;
+ size_t i;
png_ptr->try_row[0] = PNG_FILTER_VALUE_PAETH;
@@ -2559,8 +2556,8 @@
png_bytep row_buf;
png_bytep best_row;
png_uint_32 bpp;
- png_size_t mins;
- png_size_t row_bytes = row_info->rowbytes;
+ size_t mins;
+ size_t row_bytes = row_info->rowbytes;
png_debug(1, "in png_write_find_filter");
@@ -2615,8 +2612,8 @@
* 'none' filter.
*/
png_bytep rp;
- png_size_t sum = 0;
- png_size_t i;
+ size_t sum = 0;
+ size_t i;
unsigned int v;
{
@@ -2644,8 +2641,8 @@
else if ((filter_to_do & PNG_FILTER_SUB) != 0)
{
- png_size_t sum;
- png_size_t lmins = mins;
+ size_t sum;
+ size_t lmins = mins;
sum = png_setup_sub_row(png_ptr, bpp, row_bytes, lmins);
@@ -2670,8 +2667,8 @@
else if ((filter_to_do & PNG_FILTER_UP) != 0)
{
- png_size_t sum;
- png_size_t lmins = mins;
+ size_t sum;
+ size_t lmins = mins;
sum = png_setup_up_row(png_ptr, row_bytes, lmins);
@@ -2696,8 +2693,8 @@
else if ((filter_to_do & PNG_FILTER_AVG) != 0)
{
- png_size_t sum;
- png_size_t lmins = mins;
+ size_t sum;
+ size_t lmins = mins;
sum= png_setup_avg_row(png_ptr, bpp, row_bytes, lmins);
@@ -2722,8 +2719,8 @@
else if ((filter_to_do & PNG_FILTER_PAETH) != 0)
{
- png_size_t sum;
- png_size_t lmins = mins;
+ size_t sum;
+ size_t lmins = mins;
sum = png_setup_paeth_row(png_ptr, bpp, row_bytes, lmins);
@@ -2748,7 +2745,7 @@
/* Do the actual writing of a previously filtered row. */
static void
png_write_filtered_row(png_structrp png_ptr, png_bytep filtered_row,
- png_size_t full_row_length/*includes filter byte*/)
+ size_t full_row_length/*includes filter byte*/)
{
png_debug(1, "in png_write_filtered_row");
diff --git a/powerpc/filter_vsx_intrinsics.c b/powerpc/filter_vsx_intrinsics.c
index e3de496..39521cf 100644
--- a/powerpc/filter_vsx_intrinsics.c
+++ b/powerpc/filter_vsx_intrinsics.c
@@ -42,8 +42,8 @@
png_byte i;\
png_bytep rp = row + offset;\
png_const_bytep pp = prev_row;\
- png_size_t unaligned_top = 16 - (((png_size_t)rp % 16));\
- png_size_t istop;\
+ size_t unaligned_top = 16 - (((size_t)rp % 16));\
+ size_t istop;\
if(unaligned_top == 16)\
unaligned_top = 0;\
istop = row_info->rowbytes;\
diff --git a/projects/owatcom/pngconfig.mak b/projects/owatcom/pngconfig.mak
index 3ef2948..11f1aa7 100644
--- a/projects/owatcom/pngconfig.mak
+++ b/projects/owatcom/pngconfig.mak
@@ -117,7 +117,7 @@
<<
@$(COPY) << pngconfig.dfa
$# pngconfig.dfa: this file contains configuration options for libpng.
-$# If emtpy the standard configuration will be built. For this file to be
+$# If empty the standard configuration will be built. For this file to be
$# used a working version of the program 'awk' is required and the program
$# must be identified in the 'before' rule of the project.
$#
@@ -144,7 +144,7 @@
$#
$# If awk isn't set then this file is bypassed. If you just want the standard
$# configuration it is automatically produced from the distributed version
-$# (scripts\pnglibconf.h.prebuilt) by editting PNG_API_RULE to 2 (to force use
+$# (scripts\pnglibconf.h.prebuilt) by editing PNG_API_RULE to 2 (to force use
$# of the OpenWatcom library calling convention.)
$#
<<
diff --git a/projects/visualc71/README.txt b/projects/visualc71/README.txt
index 34565e4..4e1c8fa 100644
--- a/projects/visualc71/README.txt
+++ b/projects/visualc71/README.txt
@@ -12,7 +12,7 @@
* The libpng source files are in ..\..
* The zlib source files are in ..\..\..\zlib
* The zlib project file is in . /* Warning: This is until the zlib project
- files get intergrated into the next zlib release. The final zlib project
+ files get integrated into the next zlib release. The final zlib project
directory will then be ..\..\..\zlib\projects\visualc71. */
To use:
diff --git a/projects/vstudio/README.txt b/projects/vstudio/README.txt
index 71d3ba2..b8b4a3a 100644
--- a/projects/vstudio/README.txt
+++ b/projects/vstudio/README.txt
@@ -1,7 +1,7 @@
VisualStudio instructions
-libpng version 1.6.34 - September 29, 2017
+libpng version 1.6.35 - July 15, 2018
Copyright (c) 2010,2013,2015 Glenn Randers-Pehrson
diff --git a/projects/vstudio/zlib.props b/projects/vstudio/zlib.props
index 8e3682a..5bf6e28 100644
--- a/projects/vstudio/zlib.props
+++ b/projects/vstudio/zlib.props
@@ -2,7 +2,7 @@
<!--
* zlib.props - location of zlib source
*
- * libpng version 1.6.34 - September 29, 2017
+ * libpng version 1.6.35 - July 15, 2018
*
* Copyright (c) 1998-2011 Glenn Randers-Pehrson
*
diff --git a/scripts/README.txt b/scripts/README.txt
index 793506e..4faf115 100644
--- a/scripts/README.txt
+++ b/scripts/README.txt
@@ -1,11 +1,11 @@
-Makefiles for libpng version 1.6.34 - September 29, 2017
+Makefiles for libpng version 1.6.35 - July 15, 2018
pnglibconf.h.prebuilt => Stores configuration settings
makefile.linux => Linux/ELF makefile
- (gcc, creates libpng16.so.16.1.6.34)
+ (gcc, creates libpng16.so.16.1.6.35)
makefile.linux-opt=> Linux/ELF makefile with hardware optimizations on
- (gcc, creates libpng16.so.16.1.6.34)
+ (gcc, creates libpng16.so.16.1.6.35)
makefile.gcc => Generic makefile (gcc, creates static libpng.a)
makefile.knr => Archaic UNIX Makefile that converts files with
ansi2knr (Requires ansi2knr.c from
@@ -35,12 +35,12 @@
makefile.os2 => OS/2 Makefile (gcc and emx, requires libpng.def)
makefile.sco => For SCO OSr5 ELF and Unixware 7 with Native cc
makefile.sggcc => Silicon Graphics (gcc,
- creates libpng16.so.16.1.6.34)
+ creates libpng16.so.16.1.6.35)
makefile.sgi => Silicon Graphics IRIX makefile (cc, creates static lib)
makefile.solaris => Solaris 2.X makefile (gcc,
- creates libpng16.so.16.1.6.34)
+ creates libpng16.so.16.1.6.35)
makefile.so9 => Solaris 9 makefile (gcc,
- creates libpng16.so.16.1.6.34)
+ creates libpng16.so.16.1.6.35)
makefile.std => Generic UNIX makefile (cc, creates static libpng.a)
makefile.sunos => Sun makefile
makefile.32sunu => Sun Ultra 32-bit makefile
diff --git a/scripts/def.c b/scripts/def.c
index 23bdbad..5a15905 100644
--- a/scripts/def.c
+++ b/scripts/def.c
@@ -21,7 +21,7 @@
PNG_DFN "OS2 CODE PRELOAD MOVEABLE DISCARDABLE"
PNG_DFN ""
PNG_DFN "EXPORTS"
-PNG_DFN ";Version 1.6.34"
+PNG_DFN ";Version 1.6.35"
#define PNG_EXPORTA(ordinal, type, name, args, attributes)\
PNG_DFN "@" SYMBOL_PREFIX "@@" name "@"
diff --git a/scripts/libpng-config-head.in b/scripts/libpng-config-head.in
index 64dd398..c601ccd 100644
--- a/scripts/libpng-config-head.in
+++ b/scripts/libpng-config-head.in
@@ -11,7 +11,7 @@
# Modeled after libxml-config.
-version=1.6.34
+version=1.6.35
prefix=""
libdir=""
libs=""
diff --git a/scripts/libpng.pc.in b/scripts/libpng.pc.in
index 33c6576..985db64 100644
--- a/scripts/libpng.pc.in
+++ b/scripts/libpng.pc.in
@@ -5,6 +5,6 @@
Name: libpng
Description: Loads and saves PNG files
-Version: 1.6.34
+Version: 1.6.35
Libs: -L${libdir} -lpng16
Cflags: -I${includedir}
diff --git a/scripts/libtool.m4 b/scripts/libtool.m4
new file mode 100644
index 0000000..a3bc337
--- /dev/null
+++ b/scripts/libtool.m4
@@ -0,0 +1,8369 @@
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+])
+
+# serial 58 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS=$ltmain
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in @S|@*""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
+m4_defun([_LT_CC_BASENAME],
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
+
+_LT_CONFIG_LIBTOOL_INIT([
+# See if we are running on zsh, and set the options that allow our
+# commands through without removal of \ escapes INIT.
+if test -n "\${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+])
+if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+fi
+
+_LT_CHECK_OBJDIR
+
+m4_require([_LT_TAG_COMPILER])dnl
+
+case $host_os in
+aix3*)
+ # AIX sometimes has problems with the GCC collect2 program. For some
+ # reason, if we set the COLLECT_NAMES environment variable, the problems
+ # vanish in a puff of smoke.
+ if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+ fi
+ ;;
+esac
+
+# Global variables:
+ofile=libtool
+can_build_shared=yes
+
+# All known linkers require a '.a' archive for static linking (except MSVC,
+# which needs '.lib').
+libext=a
+
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+old_CC=$CC
+old_CFLAGS=$CFLAGS
+
+# Set sane defaults for various variables
+test -z "$CC" && CC=cc
+test -z "$LTCC" && LTCC=$CC
+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
+test -z "$LD" && LD=ld
+test -z "$ac_objext" && ac_objext=o
+
+_LT_CC_BASENAME([$compiler])
+
+# Only perform the check for file, if the check method requires it
+test -z "$MAGIC_CMD" && MAGIC_CMD=file
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ _LT_PATH_MAGIC
+ fi
+ ;;
+esac
+
+# Use C for the default configuration in the libtool script
+LT_SUPPORTED_TAG([CC])
+_LT_LANG_C_CONFIG
+_LT_LANG_DEFAULT_CONFIG
+_LT_CONFIG_COMMANDS
+])# _LT_SETUP
+
+
+# _LT_PREPARE_SED_QUOTE_VARS
+# --------------------------
+# Define a few sed substitution that help us do robust quoting.
+m4_defun([_LT_PREPARE_SED_QUOTE_VARS],
+[# Backslashify metacharacters that are still active within
+# double-quoted strings.
+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
+
+# Same as above, but do not quote variable references.
+double_quote_subst='s/\([["`\\]]\)/\\\1/g'
+
+# Sed substitution to delay expansion of an escaped shell variable in a
+# double_quote_subst'ed string.
+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
+
+# Sed substitution to delay expansion of an escaped single quote.
+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
+
+# Sed substitution to avoid accidental globbing in evaled expressions
+no_glob_subst='s/\*/\\\*/g'
+])
+
+# _LT_PROG_LTMAIN
+# ---------------
+# Note that this code is called both from 'configure', and 'config.status'
+# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
+# so we pass a copy along to make sure it has a sensible value anyway.
+m4_defun([_LT_PROG_LTMAIN],
+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
+ltmain=$ac_aux_dir/ltmain.sh
+])# _LT_PROG_LTMAIN
+
+
+## ------------------------------------- ##
+## Accumulate code for creating libtool. ##
+## ------------------------------------- ##
+
+# So that we can recreate a full libtool script including additional
+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
+# in macros and then make a single call at the end using the 'libtool'
+# label.
+
+
+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
+# ----------------------------------------
+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL_INIT],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_INIT])
+
+
+# _LT_CONFIG_LIBTOOL([COMMANDS])
+# ------------------------------
+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
+m4_define([_LT_CONFIG_LIBTOOL],
+[m4_ifval([$1],
+ [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
+ [$1
+])])])
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
+
+
+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
+# -----------------------------------------------------
+m4_defun([_LT_CONFIG_SAVE_COMMANDS],
+[_LT_CONFIG_LIBTOOL([$1])
+_LT_CONFIG_LIBTOOL_INIT([$2])
+])
+
+
+# _LT_FORMAT_COMMENT([COMMENT])
+# -----------------------------
+# Add leading comment marks to the start of each line, and a trailing
+# full-stop to the whole comment if one is not present already.
+m4_define([_LT_FORMAT_COMMENT],
+[m4_ifval([$1], [
+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
+ [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
+)])
+
+
+
+## ------------------------ ##
+## FIXME: Eliminate VARNAME ##
+## ------------------------ ##
+
+
+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
+# -------------------------------------------------------------------
+# CONFIGNAME is the name given to the value in the libtool script.
+# VARNAME is the (base) name used in the configure script.
+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
+# VARNAME. Any other value will be used directly.
+m4_define([_LT_DECL],
+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
+ [m4_ifval([$1], [$1], [$2])])
+ lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
+ m4_ifval([$4],
+ [lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
+ lt_dict_add_subkey([lt_decl_dict], [$2],
+ [tagged?], [m4_ifval([$5], [yes], [no])])])
+])
+
+
+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
+# --------------------------------------------------------
+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
+
+
+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_tag_varnames],
+[_lt_decl_filter([tagged?], [yes], $@)])
+
+
+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
+# ---------------------------------------------------------
+m4_define([_lt_decl_filter],
+[m4_case([$#],
+ [0], [m4_fatal([$0: too few arguments: $#])],
+ [1], [m4_fatal([$0: too few arguments: $#: $1])],
+ [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
+ [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
+ [lt_dict_filter([lt_decl_dict], $@)])[]dnl
+])
+
+
+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
+# --------------------------------------------------
+m4_define([lt_decl_quote_varnames],
+[_lt_decl_filter([value], [1], $@)])
+
+
+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_dquote_varnames],
+[_lt_decl_filter([value], [2], $@)])
+
+
+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
+# ---------------------------------------------------
+m4_define([lt_decl_varnames_tagged],
+[m4_assert([$# <= 2])dnl
+_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
+ m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
+m4_define([_lt_decl_varnames_tagged],
+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
+
+
+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
+# ------------------------------------------------
+m4_define([lt_decl_all_varnames],
+[_$0(m4_quote(m4_default([$1], [[, ]])),
+ m4_if([$2], [],
+ m4_quote(lt_decl_varnames),
+ m4_quote(m4_shift($@))))[]dnl
+])
+m4_define([_lt_decl_all_varnames],
+[lt_join($@, lt_decl_varnames_tagged([$1],
+ lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
+])
+
+
+# _LT_CONFIG_STATUS_DECLARE([VARNAME])
+# ------------------------------------
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'. VARNAME
+# must have a single quote delimited value for this to work.
+m4_define([_LT_CONFIG_STATUS_DECLARE],
+[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
+
+
+# _LT_CONFIG_STATUS_DECLARATIONS
+# ------------------------------
+# We delimit libtool config variables with single quotes, so when
+# we write them to config.status, we have to be sure to quote all
+# embedded single quotes properly. In configure, this macro expands
+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
+#
+# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'
+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
+ [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAGS
+# ----------------
+# Output comment and list of tags supported by the script
+m4_defun([_LT_LIBTOOL_TAGS],
+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
+available_tags='_LT_TAGS'dnl
+])
+
+
+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
+# -----------------------------------
+# Extract the dictionary values for VARNAME (optionally with TAG) and
+# expand to a commented shell variable setting:
+#
+# # Some comment about what VAR is for.
+# visible_name=$lt_internal_name
+m4_define([_LT_LIBTOOL_DECLARE],
+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
+ [description])))[]dnl
+m4_pushdef([_libtool_name],
+ m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
+ [0], [_libtool_name=[$]$1],
+ [1], [_libtool_name=$lt_[]$1],
+ [2], [_libtool_name=$lt_[]$1],
+ [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
+])
+
+
+# _LT_LIBTOOL_CONFIG_VARS
+# -----------------------
+# Produce commented declarations of non-tagged libtool config variables
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
+# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
+# section) are produced by _LT_LIBTOOL_TAG_VARS.
+m4_defun([_LT_LIBTOOL_CONFIG_VARS],
+[m4_foreach([_lt_var],
+ m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
+
+
+# _LT_LIBTOOL_TAG_VARS(TAG)
+# -------------------------
+m4_define([_LT_LIBTOOL_TAG_VARS],
+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
+ [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
+
+
+# _LT_TAGVAR(VARNAME, [TAGNAME])
+# ------------------------------
+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
+
+
+# _LT_CONFIG_COMMANDS
+# -------------------
+# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
+# variables for single and double quote escaping we saved from calls
+# to _LT_DECL, we can put quote escaped variables declarations
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'. Finally, any additional code accumulated
+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
+m4_defun([_LT_CONFIG_COMMANDS],
+[AC_PROVIDE_IFELSE([LT_OUTPUT],
+ dnl If the libtool generation code has been placed in $CONFIG_LT,
+ dnl instead of duplicating it all over again into config.status,
+ dnl then we will have config.status run $CONFIG_LT later, so it
+ dnl needs to know what name is stored there:
+ [AC_CONFIG_COMMANDS([libtool],
+ [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
+ dnl If the libtool generation code is destined for config.status,
+ dnl expand the accumulated commands and init code now:
+ [AC_CONFIG_COMMANDS([libtool],
+ [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
+])#_LT_CONFIG_COMMANDS
+
+
+# Initialize.
+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
+[
+
+# The HP-UX ksh and POSIX shell print the target directory to stdout
+# if CDPATH is set.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+sed_quote_subst='$sed_quote_subst'
+double_quote_subst='$double_quote_subst'
+delay_variable_subst='$delay_variable_subst'
+_LT_CONFIG_STATUS_DECLARATIONS
+LTCC='$LTCC'
+LTCFLAGS='$LTCFLAGS'
+compiler='$compiler_DEFAULT'
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+\$[]1
+_LTECHO_EOF'
+}
+
+# Quote evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_quote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+# Double-quote double-evaled strings.
+for var in lt_decl_all_varnames([[ \
+]], lt_decl_dquote_varnames); do
+ case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
+ *[[\\\\\\\`\\"\\\$]]*)
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
+ ;;
+ *)
+ eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
+ ;;
+ esac
+done
+
+_LT_OUTPUT_LIBTOOL_INIT
+])
+
+# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])
+# ------------------------------------
+# Generate a child script FILE with all initialization necessary to
+# reuse the environment learned by the parent script, and make the
+# file executable. If COMMENT is supplied, it is inserted after the
+# '#!' sequence but before initialization text begins. After this
+# macro, additional text can be appended to FILE to form the body of
+# the child script. The macro ends with non-zero status if the
+# file could not be fully written (such as if the disk is full).
+m4_ifdef([AS_INIT_GENERATED],
+[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],
+[m4_defun([_LT_GENERATED_FILE_INIT],
+[m4_require([AS_PREPARE])]dnl
+[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl
+[lt_write_fail=0
+cat >$1 <<_ASEOF || lt_write_fail=1
+#! $SHELL
+# Generated by $as_me.
+$2
+SHELL=\${CONFIG_SHELL-$SHELL}
+export SHELL
+_ASEOF
+cat >>$1 <<\_ASEOF || lt_write_fail=1
+AS_SHELL_SANITIZE
+_AS_PREPARE
+exec AS_MESSAGE_FD>&1
+_ASEOF
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
+m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
+
+# LT_OUTPUT
+# ---------
+# This macro allows early generation of the libtool script (before
+# AC_OUTPUT is called), incase it is used in configure for compilation
+# tests.
+AC_DEFUN([LT_OUTPUT],
+[: ${CONFIG_LT=./config.lt}
+AC_MSG_NOTICE([creating $CONFIG_LT])
+_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],
+[# Run this file to recreate a libtool stub with the current configuration.])
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+lt_cl_silent=false
+exec AS_MESSAGE_LOG_FD>>config.log
+{
+ echo
+ AS_BOX([Running $as_me.])
+} >&AS_MESSAGE_LOG_FD
+
+lt_cl_help="\
+'$as_me' creates a local libtool stub from the current configuration,
+for use in further configure time tests before the real libtool is
+generated.
+
+Usage: $[0] [[OPTIONS]]
+
+ -h, --help print this help, then exit
+ -V, --version print version number, then exit
+ -q, --quiet do not print progress messages
+ -d, --debug don't remove temporary files
+
+Report bugs to <bug-libtool@gnu.org>."
+
+lt_cl_version="\
+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
+configured by $[0], generated by m4_PACKAGE_STRING.
+
+Copyright (C) 2011 Free Software Foundation, Inc.
+This config.lt script is free software; the Free Software Foundation
+gives unlimited permision to copy, distribute and modify it."
+
+while test 0 != $[#]
+do
+ case $[1] in
+ --version | --v* | -V )
+ echo "$lt_cl_version"; exit 0 ;;
+ --help | --h* | -h )
+ echo "$lt_cl_help"; exit 0 ;;
+ --debug | --d* | -d )
+ debug=: ;;
+ --quiet | --q* | --silent | --s* | -q )
+ lt_cl_silent=: ;;
+
+ -*) AC_MSG_ERROR([unrecognized option: $[1]
+Try '$[0] --help' for more information.]) ;;
+
+ *) AC_MSG_ERROR([unrecognized argument: $[1]
+Try '$[0] --help' for more information.]) ;;
+ esac
+ shift
+done
+
+if $lt_cl_silent; then
+ exec AS_MESSAGE_FD>/dev/null
+fi
+_LTEOF
+
+cat >>"$CONFIG_LT" <<_LTEOF
+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
+_LTEOF
+
+cat >>"$CONFIG_LT" <<\_LTEOF
+AC_MSG_NOTICE([creating $ofile])
+_LT_OUTPUT_LIBTOOL_COMMANDS
+AS_EXIT(0)
+_LTEOF
+chmod +x "$CONFIG_LT"
+
+# configure is writing to config.log, but config.lt does its own redirection,
+# appending to config.log, which fails on DOS, as config.log is still kept
+# open by configure. Here we exec the FD to /dev/null, effectively closing
+# config.log, so it can be properly (re)opened and appended to by config.lt.
+lt_cl_success=:
+test yes = "$silent" &&
+ lt_config_lt_args="$lt_config_lt_args --quiet"
+exec AS_MESSAGE_LOG_FD>/dev/null
+$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
+exec AS_MESSAGE_LOG_FD>>config.log
+$lt_cl_success || AS_EXIT(1)
+])# LT_OUTPUT
+
+
+# _LT_CONFIG(TAG)
+# ---------------
+# If TAG is the built-in tag, create an initial libtool script with a
+# default configuration from the untagged config vars. Otherwise add code
+# to config.status for appending the configuration named by TAG from the
+# matching tagged config vars.
+m4_defun([_LT_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_CONFIG_SAVE_COMMANDS([
+ m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
+ m4_if(_LT_TAG, [C], [
+ # See if we are running on zsh, and set the options that allow our
+ # commands through without removal of \ escapes.
+ if test -n "${ZSH_VERSION+set}"; then
+ setopt NO_GLOB_SUBST
+ fi
+
+ cfgfile=${ofile}T
+ trap "$RM \"$cfgfile\"; exit 1" 1 2 15
+ $RM "$cfgfile"
+
+ cat <<_LT_EOF >> "$cfgfile"
+#! $SHELL
+# Generated automatically by $as_me ($PACKAGE) $VERSION
+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+_LT_COPYING
+_LT_LIBTOOL_TAGS
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
+# ### BEGIN LIBTOOL CONFIG
+_LT_LIBTOOL_CONFIG_VARS
+_LT_LIBTOOL_TAG_VARS
+# ### END LIBTOOL CONFIG
+
+_LT_EOF
+
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
+ case $host_os in
+ aix3*)
+ cat <<\_LT_EOF >> "$cfgfile"
+# AIX sometimes has problems with the GCC collect2 program. For some
+# reason, if we set the COLLECT_NAMES environment variable, the problems
+# vanish in a puff of smoke.
+if test set != "${COLLECT_NAMES+set}"; then
+ COLLECT_NAMES=
+ export COLLECT_NAMES
+fi
+_LT_EOF
+ ;;
+ esac
+
+ _LT_PROG_LTMAIN
+
+ # We use sed instead of cat because bash on DJGPP gets confused if
+ # if finds mixed CR/LF and LF-only lines. Since sed operates in
+ # text mode, it properly converts lines to CR/LF. This bash problem
+ # is reportedly fixed, but why not run on old versions too?
+ sed '$q' "$ltmain" >> "$cfgfile" \
+ || (rm -f "$cfgfile"; exit 1)
+
+ mv -f "$cfgfile" "$ofile" ||
+ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
+ chmod +x "$ofile"
+],
+[cat <<_LT_EOF >> "$ofile"
+
+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
+dnl in a comment (ie after a #).
+# ### BEGIN LIBTOOL TAG CONFIG: $1
+_LT_LIBTOOL_TAG_VARS(_LT_TAG)
+# ### END LIBTOOL TAG CONFIG: $1
+_LT_EOF
+])dnl /m4_if
+],
+[m4_if([$1], [], [
+ PACKAGE='$PACKAGE'
+ VERSION='$VERSION'
+ RM='$RM'
+ ofile='$ofile'], [])
+])dnl /_LT_CONFIG_SAVE_COMMANDS
+])# _LT_CONFIG
+
+
+# LT_SUPPORTED_TAG(TAG)
+# ---------------------
+# Trace this macro to discover what tags are supported by the libtool
+# --tag option, using:
+# autoconf --trace 'LT_SUPPORTED_TAG:$1'
+AC_DEFUN([LT_SUPPORTED_TAG], [])
+
+
+# C support is built-in for now
+m4_define([_LT_LANG_C_enabled], [])
+m4_define([_LT_TAGS], [])
+
+
+# LT_LANG(LANG)
+# -------------
+# Enable libtool support for the given language if not already enabled.
+AC_DEFUN([LT_LANG],
+[AC_BEFORE([$0], [LT_OUTPUT])dnl
+m4_case([$1],
+ [C], [_LT_LANG(C)],
+ [C++], [_LT_LANG(CXX)],
+ [Go], [_LT_LANG(GO)],
+ [Java], [_LT_LANG(GCJ)],
+ [Fortran 77], [_LT_LANG(F77)],
+ [Fortran], [_LT_LANG(FC)],
+ [Windows Resource], [_LT_LANG(RC)],
+ [m4_ifdef([_LT_LANG_]$1[_CONFIG],
+ [_LT_LANG($1)],
+ [m4_fatal([$0: unsupported language: "$1"])])])dnl
+])# LT_LANG
+
+
+# _LT_LANG(LANGNAME)
+# ------------------
+m4_defun([_LT_LANG],
+[m4_ifdef([_LT_LANG_]$1[_enabled], [],
+ [LT_SUPPORTED_TAG([$1])dnl
+ m4_append([_LT_TAGS], [$1 ])dnl
+ m4_define([_LT_LANG_]$1[_enabled], [])dnl
+ _LT_LANG_$1_CONFIG($1)])dnl
+])# _LT_LANG
+
+
+m4_ifndef([AC_PROG_GO], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_GO. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+m4_defun([AC_PROG_GO],
+[AC_LANG_PUSH(Go)dnl
+AC_ARG_VAR([GOC], [Go compiler command])dnl
+AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl
+_AC_ARG_VAR_LDFLAGS()dnl
+AC_CHECK_TOOL(GOC, gccgo)
+if test -z "$GOC"; then
+ if test -n "$ac_tool_prefix"; then
+ AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])
+ fi
+fi
+if test -z "$GOC"; then
+ AC_CHECK_PROG(GOC, gccgo, gccgo, false)
+fi
+])#m4_defun
+])#m4_ifndef
+
+
+# _LT_LANG_DEFAULT_CONFIG
+# -----------------------
+m4_defun([_LT_LANG_DEFAULT_CONFIG],
+[AC_PROVIDE_IFELSE([AC_PROG_CXX],
+ [LT_LANG(CXX)],
+ [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_F77],
+ [LT_LANG(F77)],
+ [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
+
+AC_PROVIDE_IFELSE([AC_PROG_FC],
+ [LT_LANG(FC)],
+ [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
+
+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
+dnl pulling things in needlessly.
+AC_PROVIDE_IFELSE([AC_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
+ [LT_LANG(GCJ)],
+ [m4_ifdef([AC_PROG_GCJ],
+ [m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([A][M_PROG_GCJ],
+ [m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
+ m4_ifdef([LT_PROG_GCJ],
+ [m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
+
+AC_PROVIDE_IFELSE([AC_PROG_GO],
+ [LT_LANG(GO)],
+ [m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])
+
+AC_PROVIDE_IFELSE([LT_PROG_RC],
+ [LT_LANG(RC)],
+ [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
+])# _LT_LANG_DEFAULT_CONFIG
+
+# Obsolete macros:
+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
+AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
+dnl AC_DEFUN([AC_LIBTOOL_F77], [])
+dnl AC_DEFUN([AC_LIBTOOL_FC], [])
+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
+dnl AC_DEFUN([AC_LIBTOOL_RC], [])
+
+
+# _LT_TAG_COMPILER
+# ----------------
+m4_defun([_LT_TAG_COMPILER],
+[AC_REQUIRE([AC_PROG_CC])dnl
+
+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
+
+# If no C compiler was specified, use CC.
+LTCC=${LTCC-"$CC"}
+
+# If no C compiler flags were specified, use CFLAGS.
+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
+
+# Allow CC to be a program name with arguments.
+compiler=$CC
+])# _LT_TAG_COMPILER
+
+
+# _LT_COMPILER_BOILERPLATE
+# ------------------------
+# Check for compiler boilerplate output or warnings with
+# the simple compiler test code.
+m4_defun([_LT_COMPILER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_compile_test_code" >conftest.$ac_ext
+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_compiler_boilerplate=`cat conftest.err`
+$RM conftest*
+])# _LT_COMPILER_BOILERPLATE
+
+
+# _LT_LINKER_BOILERPLATE
+# ----------------------
+# Check for linker boilerplate output or warnings with
+# the simple link test code.
+m4_defun([_LT_LINKER_BOILERPLATE],
+[m4_require([_LT_DECL_SED])dnl
+ac_outfile=conftest.$ac_objext
+echo "$lt_simple_link_test_code" >conftest.$ac_ext
+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
+_lt_linker_boilerplate=`cat conftest.err`
+$RM -r conftest*
+])# _LT_LINKER_BOILERPLATE
+
+# _LT_REQUIRED_DARWIN_CHECKS
+# -------------------------
+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
+ case $host_os in
+ rhapsody* | darwin*)
+ AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
+ AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
+ AC_CHECK_TOOL([LIPO], [lipo], [:])
+ AC_CHECK_TOOL([OTOOL], [otool], [:])
+ AC_CHECK_TOOL([OTOOL64], [otool64], [:])
+ _LT_DECL([], [DSYMUTIL], [1],
+ [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
+ _LT_DECL([], [NMEDIT], [1],
+ [Tool to change global to local symbols on Mac OS X])
+ _LT_DECL([], [LIPO], [1],
+ [Tool to manipulate fat objects and archives on Mac OS X])
+ _LT_DECL([], [OTOOL], [1],
+ [ldd/readelf like tool for Mach-O binaries on Mac OS X])
+ _LT_DECL([], [OTOOL64], [1],
+ [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
+
+ AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
+ [lt_cv_apple_cc_single_mod=no
+ if test -z "$LT_MULTI_MODULE"; then
+ # By default we will add the -single_module flag. You can override
+ # by either setting the environment variable LT_MULTI_MODULE
+ # non-empty at configure time, or by adding -multi_module to the
+ # link flags.
+ rm -rf libconftest.dylib*
+ echo "int foo(void){return 1;}" > conftest.c
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
+ -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
+ _lt_result=$?
+ # If there is a non-empty error log, and "single_module"
+ # appears in it, assume the flag caused a linker warning
+ if test -s conftest.err && $GREP single_module conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ # Otherwise, if the output was created with a 0 exit code from
+ # the compiler, it worked.
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
+ lt_cv_apple_cc_single_mod=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -rf libconftest.dylib*
+ rm -f conftest.*
+ fi])
+
+ AC_CACHE_CHECK([for -exported_symbols_list linker flag],
+ [lt_cv_ld_exported_symbols_list],
+ [lt_cv_ld_exported_symbols_list=no
+ save_LDFLAGS=$LDFLAGS
+ echo "_main" > conftest.sym
+ LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [lt_cv_ld_exported_symbols_list=yes],
+ [lt_cv_ld_exported_symbols_list=no])
+ LDFLAGS=$save_LDFLAGS
+ ])
+
+ AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
+ [lt_cv_ld_force_load=no
+ cat > conftest.c << _LT_EOF
+int forced_loaded() { return 2;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS -c -o conftest.o conftest.c" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS -c -o conftest.o conftest.c 2>&AS_MESSAGE_LOG_FD
+ echo "$AR cru libconftest.a conftest.o" >&AS_MESSAGE_LOG_FD
+ $AR cru libconftest.a conftest.o 2>&AS_MESSAGE_LOG_FD
+ echo "$RANLIB libconftest.a" >&AS_MESSAGE_LOG_FD
+ $RANLIB libconftest.a 2>&AS_MESSAGE_LOG_FD
+ cat > conftest.c << _LT_EOF
+int main() { return 0;}
+_LT_EOF
+ echo "$LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a" >&AS_MESSAGE_LOG_FD
+ $LTCC $LTCFLAGS $LDFLAGS -o conftest conftest.c -Wl,-force_load,./libconftest.a 2>conftest.err
+ _lt_result=$?
+ if test -s conftest.err && $GREP force_load conftest.err; then
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
+ lt_cv_ld_force_load=yes
+ else
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ fi
+ rm -f conftest.err libconftest.a conftest conftest.c
+ rm -rf conftest.dSYM
+ ])
+ case $host_os in
+ rhapsody* | darwin1.[[012]])
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
+ darwin1.*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ darwin*) # darwin 5.x on
+ # if running on 10.5 or later, the deployment target defaults
+ # to the OS version, if on x86, and 10.4, the deployment
+ # target defaults to 10.4. Don't you love it?
+ case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
+ 10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]][[,.]]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
+ 10.*)
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ esac
+ ;;
+ esac
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
+ _lt_dar_single_mod='$single_module'
+ fi
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
+ else
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
+ fi
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
+ _lt_dsymutil='~$DSYMUTIL $lib || :'
+ else
+ _lt_dsymutil=
+ fi
+ ;;
+ esac
+])
+
+
+# _LT_DARWIN_LINKER_FEATURES([TAG])
+# ---------------------------------
+# Checks for linker and compiler features on darwin
+m4_defun([_LT_DARWIN_LINKER_FEATURES],
+[
+ m4_require([_LT_REQUIRED_DARWIN_CHECKS])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_automatic, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ if test yes = "$lt_cv_ld_force_load"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
+ [FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=''
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
+ case $cc_basename in
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
+ *) _lt_dar_can_shared=$GCC ;;
+ esac
+ if test yes = "$_lt_dar_can_shared"; then
+ output_verbose_link_cmd=func_echo_all
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
+ m4_if([$1], [CXX],
+[ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
+ fi
+],[])
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+])
+
+# _LT_SYS_MODULE_PATH_AIX([TAGNAME])
+# ----------------------------------
+# Links a minimal program and checks the executable
+# for the system default hardcoded library path. In most cases,
+# this is /usr/lib:/lib, but when the MPI compilers are used
+# the location of the communication and MPI libs are included too.
+# If we don't find anything, use the default library path according
+# to the aix ld manual.
+# Store the results from the different compilers for each TAGNAME.
+# Allow to override them for all tags through lt_cv_aix_libpath.
+m4_defun([_LT_SYS_MODULE_PATH_AIX],
+[m4_require([_LT_DECL_SED])dnl
+if test set = "${lt_cv_aix_libpath+set}"; then
+ aix_libpath=$lt_cv_aix_libpath
+else
+ AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
+ [AC_LINK_IFELSE([AC_LANG_PROGRAM],[
+ lt_aix_libpath_sed='[
+ /Import File Strings/,/^$/ {
+ /^0/ {
+ s/^0 *\([^ ]*\) *$/\1/
+ p
+ }
+ }]'
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ # Check for a 64-bit object if we didn't find anything.
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
+ fi],[])
+ if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
+ fi
+ ])
+ aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
+fi
+])# _LT_SYS_MODULE_PATH_AIX
+
+
+# _LT_SHELL_INIT(ARG)
+# -------------------
+m4_define([_LT_SHELL_INIT],
+[m4_divert_text([M4SH-INIT], [$1
+])])# _LT_SHELL_INIT
+
+
+
+# _LT_PROG_ECHO_BACKSLASH
+# -----------------------
+# Find how we can fake an echo command that does not interpret backslash.
+# In particular, with Autoconf 2.60 or later we add some code to the start
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
+m4_defun([_LT_PROG_ECHO_BACKSLASH],
+[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+
+AC_MSG_CHECKING([how to print strings])
+# Test print first, because it will be a builtin if present.
+if test "X`( print -r -- -n ) 2>/dev/null`" = X-n && \
+ test "X`print -r -- $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='print -r --'
+elif test "X`printf %s $ECHO 2>/dev/null`" = "X$ECHO"; then
+ ECHO='printf %s\n'
+else
+ # Use this function as a fallback that always works.
+ func_fallback_echo ()
+ {
+ eval 'cat <<_LTECHO_EOF
+$[]1
+_LTECHO_EOF'
+ }
+ ECHO='func_fallback_echo'
+fi
+
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+case $ECHO in
+ printf*) AC_MSG_RESULT([printf]) ;;
+ print*) AC_MSG_RESULT([print -r]) ;;
+ *) AC_MSG_RESULT([cat]) ;;
+esac
+
+m4_ifdef([_AS_DETECT_SUGGESTED],
+[_AS_DETECT_SUGGESTED([
+ test -n "${ZSH_VERSION+set}${BASH_VERSION+set}" || (
+ ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
+ ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO$ECHO
+ PATH=/empty FPATH=/empty; export PATH FPATH
+ test "X`printf %s $ECHO`" = "X$ECHO" \
+ || test "X`print -r -- $ECHO`" = "X$ECHO" )])])
+
+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
+_LT_DECL([], [ECHO], [1], [An echo program that protects backslashes])
+])# _LT_PROG_ECHO_BACKSLASH
+
+
+# _LT_WITH_SYSROOT
+# ----------------
+AC_DEFUN([_LT_WITH_SYSROOT],
+[AC_MSG_CHECKING([for sysroot])
+AC_ARG_WITH([sysroot],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+ [Search for dependent libraries within DIR (or the compiler's sysroot
+ if not specified).])],
+[], [with_sysroot=no])
+
+dnl lt_sysroot will always be passed unquoted. We quote it here
+dnl in case the user passed a directory name.
+lt_sysroot=
+case $with_sysroot in #(
+ yes)
+ if test yes = "$GCC"; then
+ lt_sysroot=`$CC --print-sysroot 2>/dev/null`
+ fi
+ ;; #(
+ /*)
+ lt_sysroot=`echo "$with_sysroot" | sed -e "$sed_quote_subst"`
+ ;; #(
+ no|'')
+ ;; #(
+ *)
+ AC_MSG_RESULT([$with_sysroot])
+ AC_MSG_ERROR([The sysroot must be an absolute path.])
+ ;;
+esac
+
+ AC_MSG_RESULT([${lt_sysroot:-no}])
+_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
+[dependent libraries, and where our libraries should be installed.])])
+
+# _LT_ENABLE_LOCK
+# ---------------
+m4_defun([_LT_ENABLE_LOCK],
+[AC_ARG_ENABLE([libtool-lock],
+ [AS_HELP_STRING([--disable-libtool-lock],
+ [avoid locking (might break parallel builds)])])
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
+
+# Some flags need to be propagated to the compiler or linker for good
+# libtool support.
+case $host in
+ia64-*-hpux*)
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *ELF-32*)
+ HPUX_IA64_MODE=32
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE=64
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+*-*-irix6*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -32"
+ ;;
+ *N32*)
+ LD="${LD-ld} -n32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -64"
+ ;;
+ esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *32-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_i386_fbsd"
+ ;;
+ x86_64-*linux*)
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
+ ;;
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*kfreebsd*-gnu)
+ LD="${LD-ld} -m elf_x86_64_fbsd"
+ ;;
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*|s390*-*tpf*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+*-*-sco3.2v5*)
+ # On SCO OpenServer 5, we need -belf to get full-featured binaries.
+ SAVE_CFLAGS=$CFLAGS
+ CFLAGS="$CFLAGS -belf"
+ AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
+ [AC_LANG_PUSH(C)
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
+ AC_LANG_POP])
+ if test yes != "$lt_cv_cc_needs_belf"; then
+ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
+ CFLAGS=$SAVE_CFLAGS
+ fi
+ ;;
+*-*solaris*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo 'int i;' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ case `/usr/bin/file conftest.o` in
+ *64-bit*)
+ case $lt_cv_prog_gnu_ld in
+ yes*)
+ case $host in
+ i?86-*-solaris*|x86_64-*-solaris*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ sparc*-*-solaris*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ # GNU ld 2.21 introduced _sol2 emulations. Use them if available.
+ if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
+ LD=${LD-ld}_sol2
+ fi
+ ;;
+ *)
+ if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
+ LD="${LD-ld} -64"
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+esac
+
+need_locks=$enable_libtool_lock
+])# _LT_ENABLE_LOCK
+
+
+# _LT_PROG_AR
+# -----------
+m4_defun([_LT_PROG_AR],
+[AC_CHECK_TOOLS(AR, [ar], false)
+: ${AR=ar}
+: ${AR_FLAGS=cru}
+_LT_DECL([], [AR], [1], [The archiver])
+_LT_DECL([], [AR_FLAGS], [1], [Flags to create an archive])
+
+AC_CACHE_CHECK([for archiver @FILE support], [lt_cv_ar_at_file],
+ [lt_cv_ar_at_file=no
+ AC_COMPILE_IFELSE([AC_LANG_PROGRAM],
+ [echo conftest.$ac_objext > conftest.lst
+ lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
+ AC_TRY_EVAL([lt_ar_try])
+ if test 0 -eq "$ac_status"; then
+ # Ensure the archiver fails upon bogus file names.
+ rm -f conftest.$ac_objext libconftest.a
+ AC_TRY_EVAL([lt_ar_try])
+ if test 0 -ne "$ac_status"; then
+ lt_cv_ar_at_file=@
+ fi
+ fi
+ rm -f conftest.* libconftest.a
+ ])
+ ])
+
+if test no = "$lt_cv_ar_at_file"; then
+ archiver_list_spec=
+else
+ archiver_list_spec=$lt_cv_ar_at_file
+fi
+_LT_DECL([], [archiver_list_spec], [1],
+ [How to feed a file listing to the archiver])
+])# _LT_PROG_AR
+
+
+# _LT_CMD_OLD_ARCHIVE
+# -------------------
+m4_defun([_LT_CMD_OLD_ARCHIVE],
+[_LT_PROG_AR
+
+AC_CHECK_TOOL(STRIP, strip, :)
+test -z "$STRIP" && STRIP=:
+_LT_DECL([], [STRIP], [1], [A symbol stripping program])
+
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+test -z "$RANLIB" && RANLIB=:
+_LT_DECL([], [RANLIB], [1],
+ [Commands used to install an old-style archive])
+
+# Determine commands to create old-style static archives.
+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
+old_postinstall_cmds='chmod 644 $oldlib'
+old_postuninstall_cmds=
+
+if test -n "$RANLIB"; then
+ case $host_os in
+ bitrig* | openbsd*)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
+ ;;
+ *)
+ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$tool_oldlib"
+ ;;
+ esac
+ old_archive_cmds="$old_archive_cmds~\$RANLIB \$tool_oldlib"
+fi
+
+case $host_os in
+ darwin*)
+ lock_old_archive_extraction=yes ;;
+ *)
+ lock_old_archive_extraction=no ;;
+esac
+_LT_DECL([], [old_postinstall_cmds], [2])
+_LT_DECL([], [old_postuninstall_cmds], [2])
+_LT_TAGDECL([], [old_archive_cmds], [2],
+ [Commands used to build an old-style archive])
+_LT_DECL([], [lock_old_archive_extraction], [0],
+ [Whether to use a lock for old archive extraction])
+])# _LT_CMD_OLD_ARCHIVE
+
+
+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------------------
+# Check whether the given compiler option works
+AC_DEFUN([_LT_COMPILER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+ lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ # The option is referenced via a variable to avoid confusing sed.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>conftest.err)
+ ac_status=$?
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s "$ac_outfile"; then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings other than the usual output.
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' >conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ fi
+ $RM conftest*
+])
+
+if test yes = "[$]$2"; then
+ m4_if([$5], , :, [$5])
+else
+ m4_if([$6], , :, [$6])
+fi
+])# _LT_COMPILER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
+
+
+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
+# [ACTION-SUCCESS], [ACTION-FAILURE])
+# ----------------------------------------------------
+# Check whether the given linker option works
+AC_DEFUN([_LT_LINKER_OPTION],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_SED])dnl
+AC_CACHE_CHECK([$1], [$2],
+ [$2=no
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS $3"
+ echo "$lt_simple_link_test_code" > conftest.$ac_ext
+ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
+ # The linker can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ if test -s conftest.err; then
+ # Append any errors to the config.log.
+ cat conftest.err 1>&AS_MESSAGE_LOG_FD
+ $ECHO "$_lt_linker_boilerplate" | $SED '/^$/d' > conftest.exp
+ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
+ if diff conftest.exp conftest.er2 >/dev/null; then
+ $2=yes
+ fi
+ else
+ $2=yes
+ fi
+ fi
+ $RM -r conftest*
+ LDFLAGS=$save_LDFLAGS
+])
+
+if test yes = "[$]$2"; then
+ m4_if([$4], , :, [$4])
+else
+ m4_if([$5], , :, [$5])
+fi
+])# _LT_LINKER_OPTION
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
+
+
+# LT_CMD_MAX_LEN
+#---------------
+AC_DEFUN([LT_CMD_MAX_LEN],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+# find the maximum length of command line arguments
+AC_MSG_CHECKING([the maximum length of command line arguments])
+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
+ i=0
+ teststring=ABCD
+
+ case $build_os in
+ msdosdjgpp*)
+ # On DJGPP, this test can blow up pretty badly due to problems in libc
+ # (any single argument exceeding 2000 bytes causes a buffer overrun
+ # during glob expansion). Even if it were fixed, the result of this
+ # check would be larger than it should be.
+ lt_cv_sys_max_cmd_len=12288; # 12K is about right
+ ;;
+
+ gnu*)
+ # Under GNU Hurd, this test is not required because there is
+ # no limit to the length of command line arguments.
+ # Libtool will interpret -1 as no limit whatsoever
+ lt_cv_sys_max_cmd_len=-1;
+ ;;
+
+ cygwin* | mingw* | cegcc*)
+ # On Win9x/ME, this test blows up -- it succeeds, but takes
+ # about 5 minutes as the teststring grows exponentially.
+ # Worse, since 9x/ME are not pre-emptively multitasking,
+ # you end up with a "frozen" computer, even though with patience
+ # the test eventually succeeds (with a max line length of 256k).
+ # Instead, let's just punt: use the minimum linelength reported by
+ # all of the supported platforms: 8192 (on NT/2K/XP).
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ mint*)
+ # On MiNT this can take a long time and run out of memory.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ amigaos*)
+ # On AmigaOS with pdksh, this test takes hours, literally.
+ # So we just punt and use a minimum line length of 8192.
+ lt_cv_sys_max_cmd_len=8192;
+ ;;
+
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
+ # This has been around since 386BSD, at least. Likely further.
+ if test -x /sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
+ elif test -x /usr/sbin/sysctl; then
+ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
+ else
+ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
+ fi
+ # And add a safety zone
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ ;;
+
+ interix*)
+ # We know the value 262144 and hardcode it with a safety zone (like BSD)
+ lt_cv_sys_max_cmd_len=196608
+ ;;
+
+ os2*)
+ # The test takes a long time on OS/2.
+ lt_cv_sys_max_cmd_len=8192
+ ;;
+
+ osf*)
+ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
+ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
+ # nice to cause kernel panics so lets avoid the loop below.
+ # First set a reasonable default.
+ lt_cv_sys_max_cmd_len=16384
+ #
+ if test -x /sbin/sysconfig; then
+ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
+ *1*) lt_cv_sys_max_cmd_len=-1 ;;
+ esac
+ fi
+ ;;
+ sco3.2v5*)
+ lt_cv_sys_max_cmd_len=102400
+ ;;
+ sysv5* | sco5v6* | sysv4.2uw2*)
+ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
+ if test -n "$kargmax"; then
+ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
+ else
+ lt_cv_sys_max_cmd_len=32768
+ fi
+ ;;
+ *)
+ lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
+ else
+ # Make teststring a little bigger before we do anything with it.
+ # a 1K string should be a reasonable start.
+ for i in 1 2 3 4 5 6 7 8; do
+ teststring=$teststring$teststring
+ done
+ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
+ # If test is not a shell built-in, we'll probably end up computing a
+ # maximum length that is only half of the actual maximum length, but
+ # we can't tell.
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
+ = "X$teststring$teststring"; } >/dev/null 2>&1 &&
+ test 17 != "$i" # 1/2 MB should be enough
+ do
+ i=`expr $i + 1`
+ teststring=$teststring$teststring
+ done
+ # Only check the string length outside the loop.
+ lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
+ teststring=
+ # Add a significant safety factor because C++ compilers can tack on
+ # massive amounts of additional arguments before passing them to the
+ # linker. It appears as though 1/2 is a usable value.
+ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
+ fi
+ ;;
+ esac
+])
+if test -n "$lt_cv_sys_max_cmd_len"; then
+ AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
+else
+ AC_MSG_RESULT(none)
+fi
+max_cmd_len=$lt_cv_sys_max_cmd_len
+_LT_DECL([], [max_cmd_len], [0],
+ [What is the maximum length of a command?])
+])# LT_CMD_MAX_LEN
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
+
+
+# _LT_HEADER_DLFCN
+# ----------------
+m4_defun([_LT_HEADER_DLFCN],
+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
+])# _LT_HEADER_DLFCN
+
+
+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
+# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
+# ----------------------------------------------------------------
+m4_defun([_LT_TRY_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test yes = "$cross_compiling"; then :
+ [$4]
+else
+ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
+ lt_status=$lt_dlunknown
+ cat > conftest.$ac_ext <<_LT_EOF
+[#line $LINENO "configure"
+#include "confdefs.h"
+
+#if HAVE_DLFCN_H
+#include <dlfcn.h>
+#endif
+
+#include <stdio.h>
+
+#ifdef RTLD_GLOBAL
+# define LT_DLGLOBAL RTLD_GLOBAL
+#else
+# ifdef DL_GLOBAL
+# define LT_DLGLOBAL DL_GLOBAL
+# else
+# define LT_DLGLOBAL 0
+# endif
+#endif
+
+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
+ find out it does not work in some platform. */
+#ifndef LT_DLLAZY_OR_NOW
+# ifdef RTLD_LAZY
+# define LT_DLLAZY_OR_NOW RTLD_LAZY
+# else
+# ifdef DL_LAZY
+# define LT_DLLAZY_OR_NOW DL_LAZY
+# else
+# ifdef RTLD_NOW
+# define LT_DLLAZY_OR_NOW RTLD_NOW
+# else
+# ifdef DL_NOW
+# define LT_DLLAZY_OR_NOW DL_NOW
+# else
+# define LT_DLLAZY_OR_NOW 0
+# endif
+# endif
+# endif
+# endif
+#endif
+
+/* When -fvisibility=hidden is used, assume the code has been annotated
+ correspondingly for the symbols needed. */
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+int fnord () __attribute__((visibility("default")));
+#endif
+
+int fnord () { return 42; }
+int main ()
+{
+ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
+ int status = $lt_dlunknown;
+
+ if (self)
+ {
+ if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
+ else
+ {
+ if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
+ else puts (dlerror ());
+ }
+ /* dlclose (self); */
+ }
+ else
+ puts (dlerror ());
+
+ return status;
+}]
+_LT_EOF
+ if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
+ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
+ lt_status=$?
+ case x$lt_status in
+ x$lt_dlno_uscore) $1 ;;
+ x$lt_dlneed_uscore) $2 ;;
+ x$lt_dlunknown|x*) $3 ;;
+ esac
+ else :
+ # compilation failed
+ $3
+ fi
+fi
+rm -fr conftest*
+])# _LT_TRY_DLOPEN_SELF
+
+
+# LT_SYS_DLOPEN_SELF
+# ------------------
+AC_DEFUN([LT_SYS_DLOPEN_SELF],
+[m4_require([_LT_HEADER_DLFCN])dnl
+if test yes != "$enable_dlopen"; then
+ enable_dlopen=unknown
+ enable_dlopen_self=unknown
+ enable_dlopen_self_static=unknown
+else
+ lt_cv_dlopen=no
+ lt_cv_dlopen_libs=
+
+ case $host_os in
+ beos*)
+ lt_cv_dlopen=load_add_on
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ;;
+
+ mingw* | pw32* | cegcc*)
+ lt_cv_dlopen=LoadLibrary
+ lt_cv_dlopen_libs=
+ ;;
+
+ cygwin*)
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ ;;
+
+ darwin*)
+ # if libdl is installed we need to link against it
+ AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+ lt_cv_dlopen=dyld
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=yes
+ ])
+ ;;
+
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
+ *)
+ AC_CHECK_FUNC([shl_load],
+ [lt_cv_dlopen=shl_load],
+ [AC_CHECK_LIB([dld], [shl_load],
+ [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
+ [AC_CHECK_FUNC([dlopen],
+ [lt_cv_dlopen=dlopen],
+ [AC_CHECK_LIB([dl], [dlopen],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
+ [AC_CHECK_LIB([svld], [dlopen],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
+ [AC_CHECK_LIB([dld], [dld_link],
+ [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
+ ])
+ ])
+ ])
+ ])
+ ])
+ ;;
+ esac
+
+ if test no = "$lt_cv_dlopen"; then
+ enable_dlopen=no
+ else
+ enable_dlopen=yes
+ fi
+
+ case $lt_cv_dlopen in
+ dlopen)
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+
+ save_LDFLAGS=$LDFLAGS
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
+
+ save_LIBS=$LIBS
+ LIBS="$lt_cv_dlopen_libs $LIBS"
+
+ AC_CACHE_CHECK([whether a program can dlopen itself],
+ lt_cv_dlopen_self, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
+ lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
+ ])
+
+ if test yes = "$lt_cv_dlopen_self"; then
+ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
+ AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
+ lt_cv_dlopen_self_static, [dnl
+ _LT_TRY_DLOPEN_SELF(
+ lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
+ lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
+ ])
+ fi
+
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
+ ;;
+ esac
+
+ case $lt_cv_dlopen_self in
+ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
+ *) enable_dlopen_self=unknown ;;
+ esac
+
+ case $lt_cv_dlopen_self_static in
+ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
+ *) enable_dlopen_self_static=unknown ;;
+ esac
+fi
+_LT_DECL([dlopen_support], [enable_dlopen], [0],
+ [Whether dlopen is supported])
+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
+ [Whether dlopen of programs is supported])
+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
+ [Whether dlopen of statically linked programs is supported])
+])# LT_SYS_DLOPEN_SELF
+
+# Old name:
+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
+
+
+# _LT_COMPILER_C_O([TAGNAME])
+# ---------------------------
+# Check to see if options -c and -o are simultaneously supported by compiler.
+# This macro does not hard code the compiler like AC_PROG_CC_C_O.
+m4_defun([_LT_COMPILER_C_O],
+[m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
+ $RM -r conftest 2>/dev/null
+ mkdir conftest
+ cd conftest
+ mkdir out
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ lt_compiler_flag="-o out/conftest2.$ac_objext"
+ # Insert the option either (1) after the last *FLAGS variable, or
+ # (2) before a word containing "conftest.", or (3) at the end.
+ # Note that $ac_compile itself does not contain backslashes and begins
+ # with a dollar sign (not a hyphen), so the echo should work correctly.
+ lt_compile=`echo "$ac_compile" | $SED \
+ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
+ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
+ -e 's:$: $lt_compiler_flag:'`
+ (eval echo "\"\$as_me:$LINENO: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$lt_compile" 2>out/conftest.err)
+ ac_status=$?
+ cat out/conftest.err >&AS_MESSAGE_LOG_FD
+ echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
+ if (exit $ac_status) && test -s out/conftest2.$ac_objext
+ then
+ # The compiler can only warn and ignore the option if not recognized
+ # So say no if there are warnings
+ $ECHO "$_lt_compiler_boilerplate" | $SED '/^$/d' > out/conftest.exp
+ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
+ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
+ _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+ fi
+ fi
+ chmod u+w . 2>&AS_MESSAGE_LOG_FD
+ $RM conftest*
+ # SGI C++ compiler will create directory out/ii_files/ for
+ # template instantiation
+ test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
+ $RM out/* && rmdir out
+ cd ..
+ $RM -r conftest
+ $RM conftest*
+])
+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
+ [Does compiler simultaneously support -c and -o options?])
+])# _LT_COMPILER_C_O
+
+
+# _LT_COMPILER_FILE_LOCKS([TAGNAME])
+# ----------------------------------
+# Check to see if we can do hard links to lock some files if needed
+m4_defun([_LT_COMPILER_FILE_LOCKS],
+[m4_require([_LT_ENABLE_LOCK])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+_LT_COMPILER_C_O([$1])
+
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
+ # do not overwrite the value of need_locks provided by the user
+ AC_MSG_CHECKING([if we can lock with hard links])
+ hard_links=yes
+ $RM conftest*
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ touch conftest.a
+ ln conftest.a conftest.b 2>&5 || hard_links=no
+ ln conftest.a conftest.b 2>/dev/null && hard_links=no
+ AC_MSG_RESULT([$hard_links])
+ if test no = "$hard_links"; then
+ AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
+ need_locks=warn
+ fi
+else
+ need_locks=no
+fi
+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
+])# _LT_COMPILER_FILE_LOCKS
+
+
+# _LT_CHECK_OBJDIR
+# ----------------
+m4_defun([_LT_CHECK_OBJDIR],
+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
+[rm -f .libs 2>/dev/null
+mkdir .libs 2>/dev/null
+if test -d .libs; then
+ lt_cv_objdir=.libs
+else
+ # MS-DOS does not allow filenames that begin with a dot.
+ lt_cv_objdir=_libs
+fi
+rmdir .libs 2>/dev/null])
+objdir=$lt_cv_objdir
+_LT_DECL([], [objdir], [0],
+ [The name of the directory that contains temporary libtool files])dnl
+m4_pattern_allow([LT_OBJDIR])dnl
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+ [Define to the sub-directory where libtool stores uninstalled libraries.])
+])# _LT_CHECK_OBJDIR
+
+
+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
+# --------------------------------------
+# Check hardcoding attributes.
+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
+[AC_MSG_CHECKING([how to hardcode library paths into programs])
+_LT_TAGVAR(hardcode_action, $1)=
+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
+ test -n "$_LT_TAGVAR(runpath_var, $1)" ||
+ test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
+
+ # We can hardcode non-existent directories.
+ if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
+ # If the only mechanism to avoid hardcoding is shlibpath_var, we
+ # have to relink, otherwise we might link with an installed library
+ # when we should be linking with a yet-to-be-installed one
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+ test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
+ # Linking always hardcodes the temporary library directory.
+ _LT_TAGVAR(hardcode_action, $1)=relink
+ else
+ # We can link without hardcoding, and we can hardcode nonexisting dirs.
+ _LT_TAGVAR(hardcode_action, $1)=immediate
+ fi
+else
+ # We cannot hardcode anything, or else we can only hardcode existing
+ # directories.
+ _LT_TAGVAR(hardcode_action, $1)=unsupported
+fi
+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
+
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+ test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
+ # Fast installation is not supported
+ enable_fast_install=no
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
+ # Fast installation is not necessary
+ enable_fast_install=needless
+fi
+_LT_TAGDECL([], [hardcode_action], [0],
+ [How to hardcode a shared library path into an executable])
+])# _LT_LINKER_HARDCODE_LIBPATH
+
+
+# _LT_CMD_STRIPLIB
+# ----------------
+m4_defun([_LT_CMD_STRIPLIB],
+[m4_require([_LT_DECL_EGREP])
+striplib=
+old_striplib=
+AC_MSG_CHECKING([whether stripping libraries is possible])
+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
+ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
+ test -z "$striplib" && striplib="$STRIP --strip-unneeded"
+ AC_MSG_RESULT([yes])
+else
+# FIXME - insert some real tests, host_os isn't really good enough
+ case $host_os in
+ darwin*)
+ if test -n "$STRIP"; then
+ striplib="$STRIP -x"
+ old_striplib="$STRIP -S"
+ AC_MSG_RESULT([yes])
+ else
+ AC_MSG_RESULT([no])
+ fi
+ ;;
+ *)
+ AC_MSG_RESULT([no])
+ ;;
+ esac
+fi
+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
+_LT_DECL([], [striplib], [1])
+])# _LT_CMD_STRIPLIB
+
+
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x@S|@2 in
+ x)
+ ;;
+ *:)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+ ;;
+ x:*)
+ eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+ ;;
+ *)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
+# _LT_SYS_DYNAMIC_LINKER([TAG])
+# -----------------------------
+# PORTME Fill in your ld.so characteristics
+m4_defun([_LT_SYS_DYNAMIC_LINKER],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_OBJDUMP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
+AC_MSG_CHECKING([dynamic linker characteristics])
+m4_if([$1],
+ [], [
+if test yes = "$GCC"; then
+ case $host_os in
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
+ esac
+ case $host_os in
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
+ esac
+ lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
+ case $lt_search_path_spec in
+ *\;*)
+ # if the path contains ";" then we assume it to be the separator
+ # otherwise default to the standard path separator (i.e. ":") - it is
+ # assumed that no part of a normal pathname contains ";" but that should
+ # okay in the real world where ";" in dirpaths is itself problematic.
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED 's/;/ /g'`
+ ;;
+ *)
+ lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ esac
+ # Ok, now we have the path, separated by spaces, we can step through it
+ # and add multilib dir if necessary...
+ lt_tmp_lt_search_path_spec=
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
+ for lt_sys_path in $lt_search_path_spec; do
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
+ test -d "$lt_sys_path" && \
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
+ fi
+ done
+ lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
+ for (lt_i = NF; lt_i > 0; lt_i--) {
+ if ($lt_i != "" && $lt_i != ".") {
+ if ($lt_i == "..") {
+ lt_count++;
+ } else {
+ if (lt_count == 0) {
+ lt_foo = "/" $lt_i lt_foo;
+ } else {
+ lt_count--;
+ }
+ }
+ }
+ }
+ if (lt_foo != "") { lt_freq[[lt_foo]]++; }
+ if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
+}'`
+ # AWK program above erroneously prepends '/' to C:/dos/paths
+ # for these hosts.
+ case $host_os in
+ mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
+ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
+ esac
+ sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
+else
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+fi])
+library_names_spec=
+libname_spec='lib$name'
+soname_spec=
+shrext_cmds=.so
+postinstall_cmds=
+postuninstall_cmds=
+finish_cmds=
+finish_eval=
+shlibpath_var=
+shlibpath_overrides_runpath=unknown
+version_type=none
+dynamic_linker="$host_os ld.so"
+sys_lib_dlsearch_path_spec="/lib /usr/lib"
+need_lib_prefix=unknown
+hardcode_into_libs=no
+
+# when you set need_version to no, make sure it does not cause -set_version
+# flags to be left without arguments
+need_version=unknown
+
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
+case $host_os in
+aix3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
+ shlibpath_var=LIBPATH
+
+ # AIX 3 has no versioning support, so we append a major version to the name.
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+
+aix[[4-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ hardcode_into_libs=yes
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 supports IA64
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ else
+ # With GCC up to 2.95.x, collect2 would create an import file
+ # for dependence libraries. The import file would start with
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
+ # development snapshots of GCC prior to 3.0.
+ case $host_os in
+ aix4 | aix4.[[01]] | aix4.[[01]].*)
+ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
+ echo ' yes '
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
+ :
+ else
+ can_build_shared=no
+ fi
+ ;;
+ esac
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
+ # soname into executable. Probably we can add versioning support to
+ # collect2, so additional links can be useful in future.
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
+ # If using run time linking (on AIX 4.2 or later) use lib<name>.so
+ # instead of lib<name>.a to let people know that these are not
+ # typical AIX shared libraries.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a[(]lib.so.V[)]'
+ # We preserve .a as extension for shared libraries through AIX4.2
+ # and later when we are not doing run time linking.
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
+ shlibpath_var=LIBPATH
+ fi
+ ;;
+
+amigaos*)
+ case $host_cpu in
+ powerpc)
+ # Since July 2007 AmigaOS4 officially supports .so libraries.
+ # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ m68k)
+ library_names_spec='$libname.ixlibrary $libname.a'
+ # Create ${libname}_ixlibrary.a entries in /sys/libs.
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ ;;
+ esac
+ ;;
+
+beos*)
+ library_names_spec='$libname$shared_ext'
+ dynamic_linker="$host_os ld.so"
+ shlibpath_var=LIBRARY_PATH
+ ;;
+
+bsdi[[45]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
+ # the default ld.so.conf also contains /usr/contrib/lib and
+ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
+ # libtool to hard-code these into programs
+ ;;
+
+cygwin* | mingw* | pw32* | cegcc*)
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+
+ case $GCC,$cc_basename in
+ yes,*)
+ # gcc
+ library_names_spec='$libname.dll.a'
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+
+ case $host_os in
+ cygwin*)
+ # Cygwin DLLs use 'cyg' prefix rather than 'lib'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
+ ;;
+ mingw* | cegcc*)
+ # MinGW DLLs use traditional 'lib' prefix
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ ;;
+ pw32*)
+ # pw32 DLLs use 'pw' prefix rather than 'lib'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ ;;
+ esac
+ dynamic_linker='Win32 ld.exe'
+ ;;
+
+ *,cl*)
+ # Native MSVC
+ libname_spec='$name'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
+
+ case $build_os in
+ mingw*)
+ sys_lib_search_path_spec=
+ lt_save_ifs=$IFS
+ IFS=';'
+ for lt_path in $LIB
+ do
+ IFS=$lt_save_ifs
+ # Let DOS variable expansion print the short 8.3 style file name.
+ lt_path=`cd "$lt_path" 2>/dev/null && cmd //C "for %i in (".") do @echo %~si"`
+ sys_lib_search_path_spec="$sys_lib_search_path_spec $lt_path"
+ done
+ IFS=$lt_save_ifs
+ # Convert to MSYS style.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | sed -e 's|\\\\|/|g' -e 's| \\([[a-zA-Z]]\\):| /\\1|g' -e 's|^ ||'`
+ ;;
+ cygwin*)
+ # Convert to unix form, then to dos form, then back to unix form
+ # but this time dos style (no spaces!) so that the unix form looks
+ # like /cygdrive/c/PROGRA~1:/cygdr...
+ sys_lib_search_path_spec=`cygpath --path --unix "$LIB"`
+ sys_lib_search_path_spec=`cygpath --path --dos "$sys_lib_search_path_spec" 2>/dev/null`
+ sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ ;;
+ *)
+ sys_lib_search_path_spec=$LIB
+ if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
+ # It is most probably a Windows format PATH.
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
+ else
+ sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
+ fi
+ # FIXME: find the short name or the path components, as spaces are
+ # common. (e.g. "Program Files" -> "PROGRA~1")
+ ;;
+ esac
+
+ # DLL is installed to $(libdir)/../bin by postinstall_cmds
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ shlibpath_overrides_runpath=yes
+ dynamic_linker='Win32 link.exe'
+ ;;
+
+ *)
+ # Assume MSVC wrapper
+ library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
+ dynamic_linker='Win32 ld.exe'
+ ;;
+ esac
+ # FIXME: first we should search . and the directory the executable is in
+ shlibpath_var=PATH
+ ;;
+
+darwin* | rhapsody*)
+ dynamic_linker="$host_os dyld"
+ version_type=darwin
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
+ shlibpath_overrides_runpath=yes
+ shlibpath_var=DYLD_LIBRARY_PATH
+ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
+m4_if([$1], [],[
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
+ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
+ ;;
+
+dgux*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+freebsd* | dragonfly*)
+ # DragonFly does not have aout. When/if they implement a new
+ # versioning mechanism, adjust this.
+ if test -x /usr/bin/objformat; then
+ objformat=`/usr/bin/objformat`
+ else
+ case $host_os in
+ freebsd[[23]].*) objformat=aout ;;
+ *) objformat=elf ;;
+ esac
+ fi
+ version_type=freebsd-$objformat
+ case $version_type in
+ freebsd-elf*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ need_version=no
+ need_lib_prefix=no
+ ;;
+ freebsd-*)
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ need_version=yes
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_os in
+ freebsd2.*)
+ shlibpath_overrides_runpath=yes
+ ;;
+ freebsd3.[[01]]* | freebsdelf3.[[01]]*)
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
+ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+ *) # from 4.6 on, and DragonFly
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+ esac
+ ;;
+
+haiku*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ dynamic_linker="$host_os runtime_loader"
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
+ hardcode_into_libs=yes
+ ;;
+
+hpux9* | hpux10* | hpux11*)
+ # Give a soname corresponding to the major version so that dld.sl refuses to
+ # link against other versions.
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ case $host_cpu in
+ ia64*)
+ shrext_cmds='.so'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.so"
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
+ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
+ else
+ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
+ fi
+ ;;
+ hppa*64*)
+ shrext_cmds='.sl'
+ hardcode_into_libs=yes
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
+ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+ *)
+ shrext_cmds='.sl'
+ dynamic_linker="$host_os dld.sl"
+ shlibpath_var=SHLIB_PATH
+ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ esac
+ # HP-UX runs *really* slowly unless shared libraries are mode 555, ...
+ postinstall_cmds='chmod 555 $lib'
+ # or fails outright, so override atomically:
+ install_override_mode=555
+ ;;
+
+interix[[3-9]]*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $host_os in
+ nonstopux*) version_type=nonstopux ;;
+ *)
+ if test yes = "$lt_cv_prog_gnu_ld"; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ else
+ version_type=irix
+ fi ;;
+ esac
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
+ case $host_os in
+ irix5* | nonstopux*)
+ libsuff= shlibsuff=
+ ;;
+ *)
+ case $LD in # libtool.m4 will add one of these switches to LD
+ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
+ libsuff= shlibsuff= libmagic=32-bit;;
+ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
+ libsuff=32 shlibsuff=N32 libmagic=N32;;
+ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
+ libsuff=64 shlibsuff=64 libmagic=64-bit;;
+ *) libsuff= shlibsuff= libmagic=never-match;;
+ esac
+ ;;
+ esac
+ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
+ hardcode_into_libs=yes
+ ;;
+
+# No shared lib support for Linux oldld, aout, or coff.
+linux*oldld* | linux*aout* | linux*coff*)
+ dynamic_linker=no
+ ;;
+
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+
+ # Some binutils ld are patched to set DT_RUNPATH
+ AC_CACHE_VAL([lt_cv_shlibpath_overrides_runpath],
+ [lt_cv_shlibpath_overrides_runpath=no
+ save_LDFLAGS=$LDFLAGS
+ save_libdir=$libdir
+ eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
+ LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
+ AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
+ [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
+ [lt_cv_shlibpath_overrides_runpath=yes])])
+ LDFLAGS=$save_LDFLAGS
+ libdir=$save_libdir
+ ])
+ shlibpath_overrides_runpath=$lt_cv_shlibpath_overrides_runpath
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
+ if test -f /etc/ld.so.conf; then
+ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
+ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
+ fi
+
+ # We used to test for /lib/ld.so.1 and disable shared libraries on
+ # powerpc, because MkLinux only supported shared libraries with the
+ # GNU dynamic linker. Since this was broken with cross compilers,
+ # most powerpc-linux boxes support dynamic linking these days and
+ # people can always --disable-shared, the test was removed, and we
+ # assume the GNU/Linux dynamic linker is in use.
+ dynamic_linker='GNU/Linux ld.so'
+ ;;
+
+netbsd*)
+ version_type=sunos
+ need_lib_prefix=no
+ need_version=no
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ dynamic_linker='NetBSD (a.out) ld.so'
+ else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ dynamic_linker='NetBSD ld.elf_so'
+ fi
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ ;;
+
+newsos6)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+*nto* | *qnx*)
+ version_type=qnx
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ dynamic_linker='ldqnx.so'
+ ;;
+
+openbsd* | bitrig*)
+ version_type=sunos
+ sys_lib_dlsearch_path_spec=/usr/lib
+ need_lib_prefix=no
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ ;;
+
+os2*)
+ libname_spec='$name'
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
+ need_lib_prefix=no
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
+ dynamic_linker='OS/2 ld.exe'
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
+ ;;
+
+osf3* | osf4* | osf5*)
+ version_type=osf
+ need_lib_prefix=no
+ need_version=no
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ ;;
+
+rdos*)
+ dynamic_linker=no
+ ;;
+
+solaris*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ # ldd complains unless libraries are executable
+ postinstall_cmds='chmod +x $lib'
+ ;;
+
+sunos4*)
+ version_type=sunos
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
+ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ if test yes = "$with_gnu_ld"; then
+ need_lib_prefix=no
+ fi
+ need_version=yes
+ ;;
+
+sysv4 | sysv4.3*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ case $host_vendor in
+ sni)
+ shlibpath_overrides_runpath=no
+ need_lib_prefix=no
+ runpath_var=LD_RUN_PATH
+ ;;
+ siemens)
+ need_lib_prefix=no
+ ;;
+ motorola)
+ need_lib_prefix=no
+ need_version=no
+ shlibpath_overrides_runpath=no
+ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
+ ;;
+ esac
+ ;;
+
+sysv4*MP*)
+ if test -d /usr/nec; then
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ fi
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ version_type=sco
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+ hardcode_into_libs=yes
+ if test yes = "$with_gnu_ld"; then
+ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
+ else
+ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
+ case $host_os in
+ sco3.2v5*)
+ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
+ ;;
+ esac
+ fi
+ sys_lib_dlsearch_path_spec='/usr/lib'
+ ;;
+
+tpf*)
+ # TPF is a cross-target only. Preferred cross-host = GNU/Linux.
+ version_type=linux # correct to gnu/linux during the next big refactor
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=no
+ hardcode_into_libs=yes
+ ;;
+
+uts4*)
+ version_type=linux # correct to gnu/linux during the next big refactor
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ shlibpath_var=LD_LIBRARY_PATH
+ ;;
+
+*)
+ dynamic_linker=no
+ ;;
+esac
+AC_MSG_RESULT([$dynamic_linker])
+test no = "$dynamic_linker" && can_build_shared=no
+
+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
+if test yes = "$GCC"; then
+ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
+fi
+
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
+fi
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
+fi
+
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+_LT_DECL([], [variables_saved_for_relink], [1],
+ [Variables whose values should be saved in libtool wrapper scripts and
+ restored at link time])
+_LT_DECL([], [need_lib_prefix], [0],
+ [Do we need the "lib" prefix for modules?])
+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
+_LT_DECL([], [version_type], [0], [Library versioning type])
+_LT_DECL([], [runpath_var], [0], [Shared library runtime path variable])
+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
+_LT_DECL([], [shlibpath_overrides_runpath], [0],
+ [Is shlibpath searched before the hard-coded library search path?])
+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
+_LT_DECL([], [library_names_spec], [1],
+ [[List of archive names. First name is the real one, the rest are links.
+ The last name is the one that the linker finds with -lNAME]])
+_LT_DECL([], [soname_spec], [1],
+ [[The coded name of the library, if different from the real name]])
+_LT_DECL([], [install_override_mode], [1],
+ [Permission mode override for installation of shared libraries])
+_LT_DECL([], [postinstall_cmds], [2],
+ [Command to use after installation of a shared archive])
+_LT_DECL([], [postuninstall_cmds], [2],
+ [Command to use after uninstallation of a shared archive])
+_LT_DECL([], [finish_cmds], [2],
+ [Commands used to finish a libtool library installation in a directory])
+_LT_DECL([], [finish_eval], [1],
+ [[As "finish_cmds", except a single script fragment to be evaled but
+ not shown]])
+_LT_DECL([], [hardcode_into_libs], [0],
+ [Whether we should hardcode library paths into libraries])
+_LT_DECL([], [sys_lib_search_path_spec], [2],
+ [Compile-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+ [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+ [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
+])# _LT_SYS_DYNAMIC_LINKER
+
+
+# _LT_PATH_TOOL_PREFIX(TOOL)
+# --------------------------
+# find a file program that can recognize shared library
+AC_DEFUN([_LT_PATH_TOOL_PREFIX],
+[m4_require([_LT_DECL_EGREP])dnl
+AC_MSG_CHECKING([for $1])
+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
+[case $MAGIC_CMD in
+[[\\/*] | ?:[\\/]*])
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
+ ;;
+*)
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+dnl $ac_dummy forces splitting on constant user-supplied paths.
+dnl POSIX.2 word splitting is done only on the output of word expansions,
+dnl not every word. This closes a longstanding sh security hole.
+ ac_dummy="m4_if([$2], , $PATH, [$2])"
+ for ac_dir in $ac_dummy; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$1"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ $EGREP "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+_LT_EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
+ ;;
+esac])
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
+if test -n "$MAGIC_CMD"; then
+ AC_MSG_RESULT($MAGIC_CMD)
+else
+ AC_MSG_RESULT(no)
+fi
+_LT_DECL([], [MAGIC_CMD], [0],
+ [Used to examine libraries when file_magic_cmd begins with "file"])dnl
+])# _LT_PATH_TOOL_PREFIX
+
+# Old name:
+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
+
+
+# _LT_PATH_MAGIC
+# --------------
+# find a file program that can recognize a shared library
+m4_defun([_LT_PATH_MAGIC],
+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
+ else
+ MAGIC_CMD=:
+ fi
+fi
+])# _LT_PATH_MAGIC
+
+
+# LT_PATH_LD
+# ----------
+# find the pathname to the GNU or non-GNU linker
+AC_DEFUN([LT_PATH_LD],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PROG_ECHO_BACKSLASH])dnl
+
+AC_ARG_WITH([gnu-ld],
+ [AS_HELP_STRING([--with-gnu-ld],
+ [assume the C compiler uses GNU ld @<:@default=no@:>@])],
+ [test no = "$withval" || with_gnu_ld=yes],
+ [with_gnu_ld=no])dnl
+
+ac_prog=ld
+if test yes = "$GCC"; then
+ # Check if gcc -print-prog-name=ld gives a path.
+ AC_MSG_CHECKING([for ld used by $CC])
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return, which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
+ # Accept absolute paths.
+ [[\\/]]* | ?:[[\\/]]*)
+ re_direlt='/[[^/]][[^/]]*/\.\./'
+ # Canonicalize the pathname of ld
+ ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
+ while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
+ ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
+ done
+ test -z "$LD" && LD=$ac_prog
+ ;;
+ "")
+ # If it fails, then pretend we aren't using GCC.
+ ac_prog=ld
+ ;;
+ *)
+ # If it is relative, then search for the first ld in PATH.
+ with_gnu_ld=unknown
+ ;;
+ esac
+elif test yes = "$with_gnu_ld"; then
+ AC_MSG_CHECKING([for GNU ld])
+else
+ AC_MSG_CHECKING([for non-GNU ld])
+fi
+AC_CACHE_VAL(lt_cv_path_LD,
+[if test -z "$LD"; then
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
+ lt_cv_path_LD=$ac_dir/$ac_prog
+ # Check to see if the program is GNU ld. I'd rather use --version,
+ # but apparently some variants of GNU ld only accept -v.
+ # Break only if it was the GNU/non-GNU ld that we prefer.
+ case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
+ *GNU* | *'with BFD'*)
+ test no != "$with_gnu_ld" && break
+ ;;
+ *)
+ test yes != "$with_gnu_ld" && break
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+else
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
+fi])
+LD=$lt_cv_path_LD
+if test -n "$LD"; then
+ AC_MSG_RESULT($LD)
+else
+ AC_MSG_RESULT(no)
+fi
+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
+_LT_PATH_LD_GNU
+AC_SUBST([LD])
+
+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
+])# LT_PATH_LD
+
+# Old names:
+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_LD], [])
+dnl AC_DEFUN([AC_PROG_LD], [])
+
+
+# _LT_PATH_LD_GNU
+#- --------------
+m4_defun([_LT_PATH_LD_GNU],
+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
+[# I'd rather use --version here, but apparently some GNU lds only accept -v.
+case `$LD -v 2>&1 </dev/null` in
+*GNU* | *'with BFD'*)
+ lt_cv_prog_gnu_ld=yes
+ ;;
+*)
+ lt_cv_prog_gnu_ld=no
+ ;;
+esac])
+with_gnu_ld=$lt_cv_prog_gnu_ld
+])# _LT_PATH_LD_GNU
+
+
+# _LT_CMD_RELOAD
+# --------------
+# find reload flag for linker
+# -- PORTME Some linkers may need a different reload flag.
+m4_defun([_LT_CMD_RELOAD],
+[AC_CACHE_CHECK([for $LD option to reload object files],
+ lt_cv_ld_reload_flag,
+ [lt_cv_ld_reload_flag='-r'])
+reload_flag=$lt_cv_ld_reload_flag
+case $reload_flag in
+"" | " "*) ;;
+*) reload_flag=" $reload_flag" ;;
+esac
+reload_cmds='$LD$reload_flag -o $output$reload_objs'
+case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ if test yes != "$GCC"; then
+ reload_cmds=false
+ fi
+ ;;
+ darwin*)
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
+ else
+ reload_cmds='$LD$reload_flag -o $output$reload_objs'
+ fi
+ ;;
+esac
+_LT_TAGDECL([], [reload_flag], [1], [How to create reloadable object files])dnl
+_LT_TAGDECL([], [reload_cmds], [2])dnl
+])# _LT_CMD_RELOAD
+
+
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+ [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
+# _LT_CHECK_MAGIC_METHOD
+# ----------------------
+# how to check for library dependencies
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_MAGIC_METHOD],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+AC_CACHE_CHECK([how to recognize dependent libraries],
+lt_cv_deplibs_check_method,
+[lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# 'unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [[regex]]' -- check by looking for files in library path
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix[[4-9]]*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+bsdi[[45]]*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
+
+cygwin*)
+ # func_win32_libid is a shell function defined in ltmain.sh
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ ;;
+
+mingw* | pw32*)
+ # Base MSYS/MinGW do not provide the 'file' command needed by
+ # func_win32_libid shell function, so use a weaker test based on 'objdump',
+ # unless we find 'file', for example because we are cross-compiling.
+ if ( file / ) >/dev/null 2>&1; then
+ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
+ lt_cv_file_magic_cmd='func_win32_libid'
+ else
+ # Keep this pattern in sync with the one in func_win32_libid.
+ lt_cv_deplibs_check_method='file_magic file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ fi
+ ;;
+
+cegcc*)
+ # use the weaker test based on 'objdump'. See mingw*.
+ lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+freebsd* | dragonfly*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+haiku*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20* | hpux11*)
+ lt_cv_file_magic_cmd=/usr/bin/file
+ case $host_cpu in
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ hppa*64*)
+ [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF[ -][0-9][0-9])(-bit)?( [LM]SB)? shared object( file)?[, -]* PA-RISC [0-9]\.[0-9]']
+ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
+ ;;
+ *)
+ lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]]\.[[0-9]]) shared library'
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ esac
+ ;;
+
+interix[[3-9]]*)
+ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
+ ;;
+
+irix5* | irix6* | nonstopux*)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be glibc/ELF.
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
+ fi
+ ;;
+
+newos6*)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+*nto* | *qnx*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
+ fi
+ ;;
+
+osf3* | osf4* | osf5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+rdos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.3*)
+ case $host_vendor in
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ sequent)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
+ ;;
+ sni)
+ lt_cv_file_magic_cmd='/bin/file'
+ lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+ siemens)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ pc)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ esac
+ ;;
+
+tpf*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+esac
+])
+
+file_magic_glob=
+want_nocaseglob=no
+if test "$build" = "$host"; then
+ case $host_os in
+ mingw* | pw32*)
+ if ( shopt | grep nocaseglob ) >/dev/null 2>&1; then
+ want_nocaseglob=yes
+ else
+ file_magic_glob=`echo aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ | $SED -e "s/\(..\)/s\/[[\1]]\/[[\1]]\/g;/g"`
+ fi
+ ;;
+ esac
+fi
+
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+test -z "$deplibs_check_method" && deplibs_check_method=unknown
+
+_LT_DECL([], [deplibs_check_method], [1],
+ [Method to check whether dependent libraries are shared objects])
+_LT_DECL([], [file_magic_cmd], [1],
+ [Command to use when deplibs_check_method = "file_magic"])
+_LT_DECL([], [file_magic_glob], [1],
+ [How to find potential files when deplibs_check_method = "file_magic"])
+_LT_DECL([], [want_nocaseglob], [1],
+ [Find potential files using nocaseglob when deplibs_check_method = "file_magic"])
+])# _LT_CHECK_MAGIC_METHOD
+
+
+# LT_PATH_NM
+# ----------
+# find the pathname to a BSD- or MS-compatible name lister
+AC_DEFUN([LT_PATH_NM],
+[AC_REQUIRE([AC_PROG_CC])dnl
+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
+[if test -n "$NM"; then
+ # Let the user override the test.
+ lt_cv_path_NM=$NM
+else
+ lt_nm_to_check=${ac_tool_prefix}nm
+ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
+ lt_nm_to_check="$lt_nm_to_check nm"
+ fi
+ for lt_tmp_nm in $lt_nm_to_check; do
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
+ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
+ IFS=$lt_save_ifs
+ test -z "$ac_dir" && ac_dir=.
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
+ # Check to see if the nm accepts a BSD-compat flag.
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
+ # nm: unknown option "B" ignored
+ # Tru64's nm complains that /dev/null is an invalid object file
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
+ lt_cv_path_NM="$tmp_nm -B"
+ break 2
+ ;;
+ *)
+ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
+ */dev/null*)
+ lt_cv_path_NM="$tmp_nm -p"
+ break 2
+ ;;
+ *)
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
+ continue # so that we can try to find one that supports BSD flags
+ ;;
+ esac
+ ;;
+ esac
+ fi
+ done
+ IFS=$lt_save_ifs
+ done
+ : ${lt_cv_path_NM=no}
+fi])
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
+else
+ # Didn't find any BSD compatible name lister, look for dumpbin.
+ if test -n "$DUMPBIN"; then :
+ # Let the user override the test.
+ else
+ AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
+ *COFF*)
+ DUMPBIN="$DUMPBIN -symbols -headers"
+ ;;
+ *)
+ DUMPBIN=:
+ ;;
+ esac
+ fi
+ AC_SUBST([DUMPBIN])
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
+ fi
+fi
+test -z "$NM" && NM=nm
+AC_SUBST([NM])
+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
+
+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
+ [lt_cv_nm_interface="BSD nm"
+ echo "int some_variable = 0;" > conftest.$ac_ext
+ (eval echo "\"\$as_me:$LINENO: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$ac_compile" 2>conftest.err)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
+ (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ (eval echo "\"\$as_me:$LINENO: output\"" >&AS_MESSAGE_LOG_FD)
+ cat conftest.out >&AS_MESSAGE_LOG_FD
+ if $GREP 'External.*some_variable' conftest.out > /dev/null; then
+ lt_cv_nm_interface="MS dumpbin"
+ fi
+ rm -f conftest*])
+])# LT_PATH_NM
+
+# Old names:
+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_PROG_NM], [])
+dnl AC_DEFUN([AC_PROG_NM], [])
+
+# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+# --------------------------------
+# how to determine the name of the shared library
+# associated with a specific link library.
+# -- PORTME fill in with the dynamic library characteristics
+m4_defun([_LT_CHECK_SHAREDLIB_FROM_LINKLIB],
+[m4_require([_LT_DECL_EGREP])
+m4_require([_LT_DECL_OBJDUMP])
+m4_require([_LT_DECL_DLLTOOL])
+AC_CACHE_CHECK([how to associate runtime and link libraries],
+lt_cv_sharedlib_from_linklib_cmd,
+[lt_cv_sharedlib_from_linklib_cmd='unknown'
+
+case $host_os in
+cygwin* | mingw* | pw32* | cegcc*)
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
+ case `$DLLTOOL --help 2>&1` in
+ *--identify-strict*)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
+ ;;
+ *)
+ lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib_fallback
+ ;;
+ esac
+ ;;
+*)
+ # fallback: assume linklib IS sharedlib
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
+ ;;
+esac
+])
+sharedlib_from_linklib_cmd=$lt_cv_sharedlib_from_linklib_cmd
+test -z "$sharedlib_from_linklib_cmd" && sharedlib_from_linklib_cmd=$ECHO
+
+_LT_DECL([], [sharedlib_from_linklib_cmd], [1],
+ [Command to associate shared and link libraries])
+])# _LT_CHECK_SHAREDLIB_FROM_LINKLIB
+
+
+# _LT_PATH_MANIFEST_TOOL
+# ----------------------
+# locate the manifest tool
+m4_defun([_LT_PATH_MANIFEST_TOOL],
+[AC_CHECK_TOOL(MANIFEST_TOOL, mt, :)
+test -z "$MANIFEST_TOOL" && MANIFEST_TOOL=mt
+AC_CACHE_CHECK([if $MANIFEST_TOOL is a manifest tool], [lt_cv_path_mainfest_tool],
+ [lt_cv_path_mainfest_tool=no
+ echo "$as_me:$LINENO: $MANIFEST_TOOL '-?'" >&AS_MESSAGE_LOG_FD
+ $MANIFEST_TOOL '-?' 2>conftest.err > conftest.out
+ cat conftest.err >&AS_MESSAGE_LOG_FD
+ if $GREP 'Manifest Tool' conftest.out > /dev/null; then
+ lt_cv_path_mainfest_tool=yes
+ fi
+ rm -f conftest*])
+if test yes != "$lt_cv_path_mainfest_tool"; then
+ MANIFEST_TOOL=:
+fi
+_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
+])# _LT_PATH_MANIFEST_TOOL
+
+
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+ test DEF = "`$SED -n dnl
+ -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
+ -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
+ -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
+ -e q dnl Only consider the first "real" line
+ $1`" dnl
+])# _LT_DLL_DEF_P
+
+
+# LT_LIB_M
+# --------
+# check for math library
+AC_DEFUN([LT_LIB_M],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+LIBM=
+case $host in
+*-*-beos* | *-*-cegcc* | *-*-cygwin* | *-*-haiku* | *-*-pw32* | *-*-darwin*)
+ # These system don't have libm, or don't need it
+ ;;
+*-ncr-sysv4.3*)
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
+ AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
+ ;;
+*)
+ AC_CHECK_LIB(m, cos, LIBM=-lm)
+ ;;
+esac
+AC_SUBST([LIBM])
+])# LT_LIB_M
+
+# Old name:
+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_CHECK_LIBM], [])
+
+
+# _LT_COMPILER_NO_RTTI([TAGNAME])
+# -------------------------------
+m4_defun([_LT_COMPILER_NO_RTTI],
+[m4_require([_LT_TAG_COMPILER])dnl
+
+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+
+if test yes = "$GCC"; then
+ case $cc_basename in
+ nvcc*)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' ;;
+ esac
+
+ _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
+ lt_cv_prog_compiler_rtti_exceptions,
+ [-fno-rtti -fno-exceptions], [],
+ [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
+fi
+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
+ [Compiler flag to turn off builtin functions])
+])# _LT_COMPILER_NO_RTTI
+
+
+# _LT_CMD_GLOBAL_SYMBOLS
+# ----------------------
+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([AC_PROG_AWK])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+
+# Check for command to grab the raw symbol name followed by C symbol from nm.
+AC_MSG_CHECKING([command to parse $NM output from $compiler object])
+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
+[
+# These are sane defaults that work on at least a few old systems.
+# [They come from Ultrix. What could be older than Ultrix?!! ;)]
+
+# Character class describing NM global symbol codes.
+symcode='[[BCDEGRST]]'
+
+# Regexp to match symbols that can be accessed directly from C.
+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
+
+# Define system-specific variables.
+case $host_os in
+aix*)
+ symcode='[[BCDT]]'
+ ;;
+cygwin* | mingw* | pw32* | cegcc*)
+ symcode='[[ABCDGISTW]]'
+ ;;
+hpux*)
+ if test ia64 = "$host_cpu"; then
+ symcode='[[ABCDEGRST]]'
+ fi
+ ;;
+irix* | nonstopux*)
+ symcode='[[BCDEGRST]]'
+ ;;
+osf*)
+ symcode='[[BCDEGQRST]]'
+ ;;
+solaris*)
+ symcode='[[BDRT]]'
+ ;;
+sco3.2v5*)
+ symcode='[[DT]]'
+ ;;
+sysv4.2uw2*)
+ symcode='[[DT]]'
+ ;;
+sysv5* | sco5v6* | unixware* | OpenUNIX*)
+ symcode='[[ABDT]]'
+ ;;
+sysv4)
+ symcode='[[DFNSTU]]'
+ ;;
+esac
+
+# If we're using GNU nm, then use its standard symbol codes.
+case `$NM -V 2>&1` in
+*GNU* | *'with BFD'*)
+ symcode='[[ABCDGIRSTW]]' ;;
+esac
+
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
+# Transform an extracted symbol line into a proper C declaration.
+# Some systems (esp. on ia64) link data and code symbols differently,
+# so use this general approach.
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
+
+# Transform an extracted symbol line into symbol name and symbol address
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
+
+# Handle CRLF in mingw tool chain
+opt_cr=
+case $build_os in
+mingw*)
+ opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
+ ;;
+esac
+
+# Try without a prefix underscore, then with it.
+for ac_symprfx in "" "_"; do
+
+ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
+ symxfrm="\\1 $ac_symprfx\\2 \\2"
+
+ # Write the raw and C identifiers.
+ if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
+ # Also find C++ and __fastcall symbols from MSVC++,
+ # which start with @ or ?.
+ lt_cv_sys_global_symbol_pipe="$AWK ['"\
+" {last_section=section; section=\$ 3};"\
+" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
+" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
+" \$ 0!~/External *\|/{next};"\
+" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
+" {if(hide[section]) next};"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
+" ' prfx=^$ac_symprfx]"
+ else
+ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
+ fi
+ lt_cv_sys_global_symbol_pipe="$lt_cv_sys_global_symbol_pipe | sed '/ __gnu_lto/d'"
+
+ # Check to see that the pipe works correctly.
+ pipe_works=no
+
+ rm -f conftest*
+ cat > conftest.$ac_ext <<_LT_EOF
+#ifdef __cplusplus
+extern "C" {
+#endif
+char nm_test_var;
+void nm_test_func(void);
+void nm_test_func(void){}
+#ifdef __cplusplus
+}
+#endif
+int main(){nm_test_var='a';nm_test_func();return(0);}
+_LT_EOF
+
+ if AC_TRY_EVAL(ac_compile); then
+ # Now try to grab the symbols.
+ nlist=conftest.nm
+ if AC_TRY_EVAL(NM conftest.$ac_objext \| "$lt_cv_sys_global_symbol_pipe" \> $nlist) && test -s "$nlist"; then
+ # Try sorting and uniquifying the output.
+ if sort "$nlist" | uniq > "$nlist"T; then
+ mv -f "$nlist"T "$nlist"
+ else
+ rm -f "$nlist"T
+ fi
+
+ # Make sure that we snagged all the symbols we need.
+ if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
+ if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
+ cat <<_LT_EOF > conftest.$ac_ext
+/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
+ relocations are performed -- see ld's documentation on pseudo-relocs. */
+# define LT@&t@_DLSYM_CONST
+#elif defined __osf__
+/* This system does not cope well with relocations in const data. */
+# define LT@&t@_DLSYM_CONST
+#else
+# define LT@&t@_DLSYM_CONST const
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+_LT_EOF
+ # Now generate the symbol file.
+ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
+
+ cat <<_LT_EOF >> conftest.$ac_ext
+
+/* The mapping between symbol names and symbols. */
+LT@&t@_DLSYM_CONST struct {
+ const char *name;
+ void *address;
+}
+lt__PROGRAM__LTX_preloaded_symbols[[]] =
+{
+ { "@PROGRAM@", (void *) 0 },
+_LT_EOF
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ cat <<\_LT_EOF >> conftest.$ac_ext
+ {0, (void *) 0}
+};
+
+/* This works around a problem in FreeBSD linker */
+#ifdef FREEBSD_WORKAROUND
+static const void *lt_preloaded_setup() {
+ return lt__PROGRAM__LTX_preloaded_symbols;
+}
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+_LT_EOF
+ # Now try linking the two files.
+ mv conftest.$ac_objext conftstm.$ac_objext
+ lt_globsym_save_LIBS=$LIBS
+ lt_globsym_save_CFLAGS=$CFLAGS
+ LIBS=conftstm.$ac_objext
+ CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
+ pipe_works=yes
+ fi
+ LIBS=$lt_globsym_save_LIBS
+ CFLAGS=$lt_globsym_save_CFLAGS
+ else
+ echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
+ fi
+ else
+ echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
+ cat conftest.$ac_ext >&5
+ fi
+ rm -rf conftest* conftst*
+
+ # Do not use the global_symbol_pipe unless it works.
+ if test yes = "$pipe_works"; then
+ break
+ else
+ lt_cv_sys_global_symbol_pipe=
+ fi
+done
+])
+if test -z "$lt_cv_sys_global_symbol_pipe"; then
+ lt_cv_sys_global_symbol_to_cdecl=
+fi
+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
+ AC_MSG_RESULT(failed)
+else
+ AC_MSG_RESULT(ok)
+fi
+
+# Response file support.
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ nm_file_list_spec='@'
+elif $NM --help 2>/dev/null | grep '[[@]]FILE' >/dev/null; then
+ nm_file_list_spec='@'
+fi
+
+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
+ [Take the output of nm and produce a listing of raw symbols and C names])
+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
+ [Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+ [Transform the output of nm into a list of symbols to manually relocate])
+_LT_DECL([global_symbol_to_c_name_address],
+ [lt_cv_sys_global_symbol_to_c_name_address], [1],
+ [Transform the output of nm in a C name address pair])
+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
+ [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
+ [Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+ [The name lister interface])
+_LT_DECL([], [nm_file_list_spec], [1],
+ [Specify filename containing input files for $NM])
+]) # _LT_CMD_GLOBAL_SYMBOLS
+
+
+# _LT_COMPILER_PIC([TAGNAME])
+# ---------------------------
+m4_defun([_LT_COMPILER_PIC],
+[m4_require([_LT_TAG_COMPILER])dnl
+_LT_TAGVAR(lt_prog_compiler_wl, $1)=
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+_LT_TAGVAR(lt_prog_compiler_static, $1)=
+
+m4_if([$1], [CXX], [
+ # C++ specific cases for pic, static, wl, etc.
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+ *djgpp*)
+ # DJGPP does not support shared libraries at all
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ else
+ case $host_os in
+ aix[[4-9]]*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+ chorus*)
+ case $cc_basename in
+ cxch68*)
+ # Green Hills C++ Compiler
+ # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
+ ;;
+ esac
+ ;;
+ mingw* | cygwin* | os2* | pw32* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ ;;
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ freebsd* | dragonfly*)
+ # FreeBSD uses GNU C++
+ ;;
+ hpux9* | hpux10* | hpux11*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ fi
+ ;;
+ aCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ interix*)
+ # This is c89, which is MS Visual C++ (no shared libs)
+ # Anyone wants to do a port?
+ ;;
+ irix5* | irix6* | nonstopux*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ # CC pic flag -KPIC is the default.
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ KCC*)
+ # KAI C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ ecpc* )
+ # old Intel C++ for x86_64, which still supported -KPIC.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ icpc* )
+ # Intel C++, used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ cxx*)
+ # Compaq C++
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xlc* | xlC* | bgxl[[cC]]* | mpixl[[cC]]*)
+ # IBM XL 8.0, 9.0 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+ lynxos*)
+ ;;
+ m88k*)
+ ;;
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ netbsd*)
+ ;;
+ *qnx* | *nto*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ cxx*)
+ # Digital/Compaq C++
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # Make sure the PIC flag is empty. It appears that all Alpha
+ # Linux and Compaq Tru64 Unix objects are PIC.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ psos*)
+ ;;
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ lcc*)
+ # Lucid
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ ;;
+ *)
+ ;;
+ esac
+ ;;
+ vxworks*)
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+],
+[
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+
+ case $host_os in
+ aix*)
+ # All AIX code is PIC.
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ m68k)
+ # FIXME: we need at least 68020 code to build shared libraries, but
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
+ ;;
+ esac
+ ;;
+
+ beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
+ # PIC is the default for these OSes.
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ # Although the cygwin gcc ignores -fPIC, still need this for old-style
+ # (--disable-auto-import) libraries
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ ;;
+
+ haiku*)
+ # PIC is the default for Haiku.
+ # The "-static" flag exists, but is broken.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)=
+ ;;
+
+ hpux*)
+ # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
+ # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag
+ # sets the default TLS model and affects inlining.
+ case $host_cpu in
+ hppa*64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ # Interix 3.x gcc -fpic/-fPIC options generate broken code.
+ # Instead, we relocate shared libraries at runtime.
+ ;;
+
+ msdosdjgpp*)
+ # Just because we use GCC doesn't mean we suddenly get shared libraries
+ # on systems that don't support them.
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ enable_shared=no
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
+ fi
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ ;;
+ esac
+
+ case $cc_basename in
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Xlinker '
+ if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="-Xcompiler $_LT_TAGVAR(lt_prog_compiler_pic, $1)"
+ fi
+ ;;
+ esac
+ else
+ # PORTME Check for flag to pass linker flags through the system compiler.
+ case $host_os in
+ aix*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ if test ia64 = "$host_cpu"; then
+ # AIX 5 now supports IA64 processor
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ else
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
+ fi
+ ;;
+
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+
+ mingw* | cygwin* | pw32* | os2* | cegcc*)
+ # This hack is so that the source file can tell whether it is being
+ # built for inclusion in a dll (and should export symbols for example).
+ m4_if([$1], [GCJ], [],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
+ ;;
+
+ hpux9* | hpux10* | hpux11*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
+ # not for PA HP-UX.
+ case $host_cpu in
+ hppa*64*|ia64*)
+ # +Z the default
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
+ ;;
+ esac
+ # Is there a better lt_prog_compiler_static that works with the bundled CC?
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # PIC (with -KPIC) is the default.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ # old Intel for x86_64, which still supported -KPIC.
+ ecc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # icc used to be incompatible with GCC.
+ # ICC 10 doesn't accept -KPIC any more.
+ icc* | ifort*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ # Lahey Fortran 8.1.
+ lf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
+ ;;
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group compilers (*not* the Pentium gcc compiler,
+ # which looks to be a dead project)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ ccc*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All Alpha code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+ xl* | bgxl* | bgf* | mpixl*)
+ # IBM XL C 8.0/Fortran 10.1, 11.1 on PPC and BlueGene
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ Ceres\ Fortran* | *Sun*Fortran*\ [[1-7]].* | *Sun*Fortran*\ 8.[[0-3]]*)
+ # Sun Fortran 8.3 passes all unrecognized flags to the linker
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
+ ;;
+ *Sun\ F* | *Sun*Fortran*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ ;;
+ *Sun\ C*)
+ # Sun C 5.9
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ ;;
+ *Intel*\ [[CF]]*Compiler*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
+ *Portland\ Group*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *nto* | *qnx*)
+ # QNX uses GNU C++, but need to define -shared option too, otherwise
+ # it will coredump.
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
+ ;;
+
+ osf3* | osf4* | osf5*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ # All OSF/1 code is PIC.
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ rdos*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ case $cc_basename in
+ f77* | f90* | f95* | sunf77* | sunf90* | sunf95*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4 | sysv4.2uw2* | sysv4.3*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ fi
+ ;;
+
+ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ unicos*)
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+
+ *)
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
+ ;;
+ esac
+ fi
+])
+case $host_os in
+ # For platforms that do not support PIC, -DPIC is meaningless:
+ *djgpp*)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ ;;
+ *)
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
+ ;;
+esac
+
+AC_CACHE_CHECK([for $compiler option to produce PIC],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
+_LT_TAGVAR(lt_prog_compiler_pic, $1)=$_LT_TAGVAR(lt_cv_prog_compiler_pic, $1)
+
+#
+# Check to make sure the PIC flag actually works.
+#
+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
+ _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
+ [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
+ [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
+ [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
+ "" | " "*) ;;
+ *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
+ esac],
+ [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
+ _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
+fi
+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
+ [Additional compiler flags for building library objects])
+
+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
+ [How to pass a linker flag through the compiler])
+#
+# Check to make sure the static flag actually works.
+#
+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
+ _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
+ $lt_tmp_static_flag,
+ [],
+ [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
+ [Compiler flag to prevent dynamic linking])
+])# _LT_COMPILER_PIC
+
+
+# _LT_LINKER_SHLIBS([TAGNAME])
+# ----------------------------
+# See if the linker supports building shared libraries.
+m4_defun([_LT_LINKER_SHLIBS],
+[AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_DECL_SED])dnl
+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
+m4_require([_LT_TAG_COMPILER])dnl
+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+m4_if([$1], [CXX], [
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ case $host_os in
+ aix[[4-9]]*)
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+ fi
+ ;;
+ pw32*)
+ _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
+ ;;
+ cygwin* | mingw* | cegcc*)
+ case $cc_basename in
+ cl*)
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+ ;;
+ esac
+ ;;
+ *)
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ ;;
+ esac
+], [
+ runpath_var=
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(archive_cmds, $1)=
+ _LT_TAGVAR(archive_expsym_cmds, $1)=
+ _LT_TAGVAR(compiler_needs_object, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(hardcode_automatic, $1)=no
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ _LT_TAGVAR(hardcode_minus_L, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+ _LT_TAGVAR(inherit_rpath, $1)=no
+ _LT_TAGVAR(link_all_deplibs, $1)=unknown
+ _LT_TAGVAR(module_cmds, $1)=
+ _LT_TAGVAR(module_expsym_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)=
+ _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
+ _LT_TAGVAR(thread_safe_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ # include_expsyms should be a list of space-separated symbols to be *always*
+ # included in the symbol list
+ _LT_TAGVAR(include_expsyms, $1)=
+ # exclude_expsyms can be an extended regexp of symbols to exclude
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
+ _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
+ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
+ # platforms (ab)use it in PIC code, but their linkers get confused if
+ # the symbol is explicitly referenced. Since portable code cannot
+ # rely on this symbol name, it's probably fine to never include it in
+ # preloaded symbol tables.
+ # Exclude shared library initialization/finalization symbols.
+dnl Note also adjust exclude_expsyms for C++ above.
+ extract_expsyms_cmds=
+
+ case $host_os in
+ cygwin* | mingw* | pw32* | cegcc*)
+ # FIXME: the MSVC++ port hasn't been tested in a loooong time
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ if test yes != "$GCC"; then
+ with_gnu_ld=no
+ fi
+ ;;
+ interix*)
+ # we just hope/assume this is gcc and not c89 (= MSVC++)
+ with_gnu_ld=yes
+ ;;
+ openbsd* | bitrig*)
+ with_gnu_ld=no
+ ;;
+ esac
+
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+
+ # On some targets, GNU ld is compatible enough with the native linker
+ # that we're better off using the native interface for both.
+ lt_use_gnu_ld_interface=no
+ if test yes = "$with_gnu_ld"; then
+ case $host_os in
+ aix*)
+ # The AIX port of GNU ld has always aspired to compatibility
+ # with the native linker. However, as the warning in the GNU ld
+ # block says, versions before 2.19.5* couldn't really create working
+ # shared libraries, regardless of the interface used.
+ case `$LD -v 2>&1` in
+ *\ \(GNU\ Binutils\)\ 2.19.5*) ;;
+ *\ \(GNU\ Binutils\)\ 2.[[2-9]]*) ;;
+ *\ \(GNU\ Binutils\)\ [[3-9]]*) ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ ;;
+ *)
+ lt_use_gnu_ld_interface=yes
+ ;;
+ esac
+ fi
+
+ if test yes = "$lt_use_gnu_ld_interface"; then
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ wlarc='$wl'
+
+ # Set some defaults for GNU ld with shared library support. These
+ # are reset later if shared libraries are not supported. Putting them
+ # here allows them to be overridden if necessary.
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ supports_anon_versioning=no
+ case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
+ *GNU\ gold*) supports_anon_versioning=yes ;;
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
+ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
+ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
+ *\ 2.11.*) ;; # other 2.11 versions
+ *) supports_anon_versioning=yes ;;
+ esac
+
+ # See if GNU ld supports shared libraries.
+ case $host_os in
+ aix[[3-9]]*)
+ # On AIX/PPC, the GNU linker is very broken
+ if test ia64 != "$host_cpu"; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: the GNU linker, at least up to release 2.19, is reported
+*** to be unable to reliably create shared libraries on AIX.
+*** Therefore, libtool is disabling shared libraries support. If you
+*** really care for shared libraries, you may want to install binutils
+*** 2.20 or above, or modify your PATH so that a non-GNU linker is found.
+*** You will then need to restart the configuration process.
+
+_LT_EOF
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
+ _LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+
+ gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
+ tmp_diet=no
+ if test linux-dietlibc = "$host_os"; then
+ case $cc_basename in
+ diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
+ esac
+ fi
+ if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
+ && test no = "$tmp_diet"
+ then
+ tmp_addflag=' $pic_flag'
+ tmp_sharedflag='-shared'
+ case $cc_basename,$host_cpu in
+ pgcc*) # Portland Group C compiler
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ tmp_addflag=' $pic_flag'
+ ;;
+ pgf77* | pgf90* | pgf95* | pgfortran*)
+ # Portland Group f77 and f90 compilers
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ tmp_addflag=' $pic_flag -Mnomain' ;;
+ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
+ tmp_addflag=' -i_dynamic' ;;
+ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
+ tmp_addflag=' -i_dynamic -nofor_main' ;;
+ ifc* | ifort*) # Intel Fortran compiler
+ tmp_addflag=' -nofor_main' ;;
+ lf95*) # Lahey Fortran 8.1
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
+ xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
+ tmp_sharedflag='-qmkshrobj'
+ tmp_addflag= ;;
+ nvcc*) # Cuda Compiler Driver 2.2
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ ;;
+ esac
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C 5.9
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+ tmp_sharedflag='-G' ;;
+ *Sun\ F*) # Sun Fortran 8.3
+ tmp_sharedflag='-G' ;;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+
+ if test yes = "$supports_anon_versioning"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+ fi
+
+ case $cc_basename in
+ tcc*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+ ;;
+ xlf* | bgf* | bgxlf* | mpixlf*)
+ # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ esac
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
+ wlarc=
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ fi
+ ;;
+
+ solaris*)
+ if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: The releases 2.8.* of the GNU linker cannot reliably
+*** create shared libraries on Solaris systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.9.1 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
+ case `$LD -v 2>&1` in
+ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ cat <<_LT_EOF 1>&2
+
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
+*** reliably create shared libraries on SCO systems. Therefore, libtool
+*** is disabling shared libraries support. We urge you to upgrade GNU
+*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
+*** your PATH or compiler configuration so that the native linker is
+*** used, and then restart.
+
+_LT_EOF
+ ;;
+ *)
+ # For security reasons, it is highly recommended that you always
+ # use absolute paths for naming shared libraries, and exclude the
+ # DT_RUNPATH tag from executables and libraries. But doing so
+ # requires that you compile everything twice, which is a pain.
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ sunos4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+
+ if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
+ runpath_var=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ # PORTME fill in a description of your system's linker (not GNU ld)
+ case $host_os in
+ aix3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
+ # Note: this linker hardcodes the directories in LIBPATH if there
+ # are no directories specified by -L.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
+ # Neither direct hardcoding nor static linking is supported with a
+ # broken collect2.
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test ia64 = "$host_cpu"; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=
+ else
+ # If we're using GNU nm, then we don't want the "-C" option.
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
+ if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
+ else
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
+ fi
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
+ aix_use_runtimelinking=yes
+ break
+ fi
+ done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
+
+ if test yes = "$GCC"; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`$CC -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ ;;
+ esac
+ shared_flag='-shared'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
+ fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
+ else
+ # not using gcc
+ if test ia64 = "$host_cpu"; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
+ else
+ shared_flag='$wl-bM:SRE'
+ fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+ else
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
+ fi
+ fi
+ ;;
+
+ amigaos*)
+ case $host_cpu in
+ powerpc)
+ # see comment about AmigaOS4 .so support
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)=''
+ ;;
+ m68k)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ ;;
+
+ bsdi[[45]]*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ # When not using gcc, we currently assume that we are using
+ # Microsoft Visual C++.
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ case $cc_basename in
+ cl*)
+ # Native MSVC
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ _LT_TAGVAR(exclude_expsyms, $1)='_NULL_IMPORT_DESCRIPTOR|_IMPORT_DESCRIPTOR_.*'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1,DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # Assume MSVC wrapper
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
+ # The linker will automatically build a .lib file if we build a DLL.
+ _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ # FIXME: Should let the user specify the lib program.
+ _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+ esac
+ ;;
+
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ dgux*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
+ # support. Future versions do this automatically, but an explicit c++rt0.o
+ # does not break anything, and helps significantly (at the cost of a little
+ # extra space).
+ freebsd2.2*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # Unfortunately, older versions of FreeBSD 2 do not have this feature.
+ freebsd2.*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
+ freebsd* | dragonfly*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ hpux9*)
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ ;;
+
+ hpux10*)
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ fi
+ ;;
+
+ hpux11*)
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ else
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ m4_if($1, [], [
+ # Older versions of the 11.00 compiler do not understand -b yet
+ # (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
+ _LT_LINKER_OPTION([if $CC understands -b],
+ _LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ ;;
+ esac
+ fi
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+
+ # hardcode_minus_L: Not really in the search PATH,
+ # but as the default location of the library.
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ ;;
+ esac
+ fi
+ ;;
+
+ irix5* | irix6* | nonstopux*)
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ # Try to use the -exported_symbol ld option, if it does not
+ # work, assume that -exports_file does not work either and
+ # implicitly export all symbols.
+ # This should be the same for all languages, so no per-tag cache variable.
+ AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
+ [lt_cv_irix_exported_symbol],
+ [save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
+ AC_LINK_IFELSE(
+ [AC_LANG_SOURCE(
+ [AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
+ [C++], [[int foo (void) { return 0; }]],
+ [Fortran 77], [[
+ subroutine foo
+ end]],
+ [Fortran], [[
+ subroutine foo
+ end]])])],
+ [lt_cv_irix_exported_symbol=yes],
+ [lt_cv_irix_exported_symbol=no])
+ LDFLAGS=$save_LDFLAGS])
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
+ fi
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ newsos6)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *nto* | *qnx*)
+ ;;
+
+ openbsd* | bitrig*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ fi
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ osf3*)
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ osf4* | osf5*) # as osf3* with the addition of -msym flag
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ else
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
+
+ # Both c and cxx compiler support -rpath directly
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ ;;
+
+ solaris*)
+ _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ else
+ case `$CC -V 2>&1` in
+ *"Compilers 5.0"*)
+ wlarc=''
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ ;;
+ *)
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ ;;
+ esac
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
+ # but is careful enough not to reorder.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ fi
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ sunos4*)
+ if test sequent = "$host_vendor"; then
+ # Use $CC to link under sequent, because it throws in some extra .o
+ # files that make .init and .fini sections work.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
+ fi
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4)
+ case $host_vendor in
+ sni)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
+ ;;
+ siemens)
+ ## LD is ld it makes a PLAMLIB
+ ## CC just makes a GrossModule.
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ ;;
+ motorola)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
+ ;;
+ esac
+ runpath_var='LD_RUN_PATH'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ sysv4.3*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
+ ;;
+
+ sysv4*MP*)
+ if test -d /usr/nec; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var=LD_RUN_PATH
+ hardcode_runpath_var=yes
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ fi
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We CANNOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ fi
+ ;;
+
+ uts4*)
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+
+ *)
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ if test sni = "$host_vendor"; then
+ case $host in
+ sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
+ ;;
+ esac
+ fi
+ fi
+])
+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
+
+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
+
+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
+_LT_DECL([], [extract_expsyms_cmds], [2],
+ [The commands to extract the exported symbol list from a shared archive])
+
+#
+# Do we need to explicitly link libc?
+#
+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
+x|xyes)
+ # Assume -lc should be added
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+
+ if test yes,yes = "$GCC,$enable_shared"; then
+ case $_LT_TAGVAR(archive_cmds, $1) in
+ *'~'*)
+ # FIXME: we may have to deal with multi-command sequences.
+ ;;
+ '$CC '*)
+ # Test whether the compiler implicitly links with -lc since on some
+ # systems, -lgcc has to come before -lc. If gcc already passes -lc
+ # to ld, don't add -lc before -lgcc.
+ AC_CACHE_CHECK([whether -lc should be explicitly linked in],
+ [lt_cv_]_LT_TAGVAR(archive_cmds_need_lc, $1),
+ [$RM conftest*
+ echo "$lt_simple_compile_test_code" > conftest.$ac_ext
+
+ if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
+ soname=conftest
+ lib=conftest
+ libobjs=conftest.$ac_objext
+ deplibs=
+ wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
+ pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
+ compiler_flags=-v
+ linker_flags=-v
+ verstring=
+ output_objdir=.
+ libname=conftest
+ lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
+ _LT_TAGVAR(allow_undefined_flag, $1)=
+ if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
+ then
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ else
+ lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ fi
+ _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
+ else
+ cat conftest.err 1>&5
+ fi
+ $RM conftest*
+ ])
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=$lt_cv_[]_LT_TAGVAR(archive_cmds_need_lc, $1)
+ ;;
+ esac
+ fi
+ ;;
+esac
+
+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
+ [Whether or not to add -lc for building shared libraries])
+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
+ [enable_shared_with_static_runtimes], [0],
+ [Whether or not to disallow shared libs when runtime libs are static])
+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
+ [Compiler flag to allow reflexive dlopens])
+_LT_TAGDECL([], [whole_archive_flag_spec], [1],
+ [Compiler flag to generate shared objects directly from archives])
+_LT_TAGDECL([], [compiler_needs_object], [1],
+ [Whether the compiler copes with passing no objects directly])
+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
+ [Create an old-style archive from a shared archive])
+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
+ [Create a temporary old-style archive to link instead of a shared archive])
+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
+_LT_TAGDECL([], [archive_expsym_cmds], [2])
+_LT_TAGDECL([], [module_cmds], [2],
+ [Commands used to build a loadable module if different from building
+ a shared archive.])
+_LT_TAGDECL([], [module_expsym_cmds], [2])
+_LT_TAGDECL([], [with_gnu_ld], [1],
+ [Whether we are building with GNU ld or not])
+_LT_TAGDECL([], [allow_undefined_flag], [1],
+ [Flag that allows shared libraries with undefined symbols to be built])
+_LT_TAGDECL([], [no_undefined_flag], [1],
+ [Flag that enforces no undefined symbols])
+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
+ [Flag to hardcode $libdir into a binary during linking.
+ This must work even if $libdir does not exist])
+_LT_TAGDECL([], [hardcode_libdir_separator], [1],
+ [Whether we need a single "-rpath" flag with a separated argument])
+_LT_TAGDECL([], [hardcode_direct], [0],
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+ DIR into the resulting binary])
+_LT_TAGDECL([], [hardcode_direct_absolute], [0],
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
+ DIR into the resulting binary and the resulting library dependency is
+ "absolute", i.e impossible to change by setting $shlibpath_var if the
+ library is relocated])
+_LT_TAGDECL([], [hardcode_minus_L], [0],
+ [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
+ [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
+ into the resulting binary])
+_LT_TAGDECL([], [hardcode_automatic], [0],
+ [Set to "yes" if building a shared library automatically hardcodes DIR
+ into the library and all subsequent libraries and executables linked
+ against it])
+_LT_TAGDECL([], [inherit_rpath], [0],
+ [Set to yes if linker adds runtime paths of dependent libraries
+ to runtime path list])
+_LT_TAGDECL([], [link_all_deplibs], [0],
+ [Whether libtool must link a program against all its dependency libraries])
+_LT_TAGDECL([], [always_export_symbols], [0],
+ [Set to "yes" if exported symbols are required])
+_LT_TAGDECL([], [export_symbols_cmds], [2],
+ [The commands to list exported symbols])
+_LT_TAGDECL([], [exclude_expsyms], [1],
+ [Symbols that should not be listed in the preloaded symbols])
+_LT_TAGDECL([], [include_expsyms], [1],
+ [Symbols that must always be exported])
+_LT_TAGDECL([], [prelink_cmds], [2],
+ [Commands necessary for linking programs (against libraries) with templates])
+_LT_TAGDECL([], [postlink_cmds], [2],
+ [Commands necessary for finishing linking programs])
+_LT_TAGDECL([], [file_list_spec], [1],
+ [Specify filename containing input files])
+dnl FIXME: Not yet implemented
+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
+dnl [Compiler flag to generate thread safe objects])
+])# _LT_LINKER_SHLIBS
+
+
+# _LT_LANG_C_CONFIG([TAG])
+# ------------------------
+# Ensure that the configuration variables for a C compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_C_CONFIG],
+[m4_require([_LT_DECL_EGREP])dnl
+lt_save_CC=$CC
+AC_LANG_PUSH(C)
+
+# Source file extension for C test sources.
+ac_ext=c
+
+# Object file extension for compiled C test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="int some_variable = 0;"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='int main(){return(0);}'
+
+_LT_TAG_COMPILER
+# Save the default compiler, since it gets overwritten when the other
+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
+compiler_DEFAULT=$CC
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+ LT_SYS_DLOPEN_SELF
+ _LT_CMD_STRIPLIB
+
+ # Report what library types will actually be built
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test no = "$can_build_shared" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test yes = "$enable_shared" && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+
+ aix[[4-9]]*)
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test yes = "$enable_shared" || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_CONFIG($1)
+fi
+AC_LANG_POP
+CC=$lt_save_CC
+])# _LT_LANG_C_CONFIG
+
+
+# _LT_LANG_CXX_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a C++ compiler are suitably
+# defined. These variables are subsequently used by _LT_CONFIG to write
+# the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_CXX_CONFIG],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_DECL_EGREP])dnl
+m4_require([_LT_PATH_MANIFEST_TOOL])dnl
+if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
+ AC_PROG_CXXCPP
+else
+ _lt_caught_CXX_error=yes
+fi
+
+AC_LANG_PUSH(C++)
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(compiler_needs_object, $1)=no
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for C++ test sources.
+ac_ext=cpp
+
+# Object file extension for compiled C++ test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the CXX compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_caught_CXX_error"; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="int some_variable = 0;"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_CFLAGS=$CFLAGS
+ lt_save_LD=$LD
+ lt_save_GCC=$GCC
+ GCC=$GXX
+ lt_save_with_gnu_ld=$with_gnu_ld
+ lt_save_path_LD=$lt_cv_path_LD
+ if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
+ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
+ else
+ $as_unset lt_cv_prog_gnu_ld
+ fi
+ if test -n "${lt_cv_path_LDCXX+set}"; then
+ lt_cv_path_LD=$lt_cv_path_LDCXX
+ else
+ $as_unset lt_cv_path_LD
+ fi
+ test -z "${LDCXX+set}" || LD=$LDCXX
+ CC=${CXX-"c++"}
+ CFLAGS=$CXXFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ # We don't want -fno-exception when compiling C++ code, so set the
+ # no_builtin_flag separately
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
+ else
+ _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
+ fi
+
+ if test yes = "$GXX"; then
+ # Set up default GNU C++ configuration
+
+ LT_PATH_LD
+
+ # Check if GNU C++ uses GNU ld as the underlying linker, since the
+ # archiving commands below assume that GNU ld is being used.
+ if test yes = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+
+ # If archive_cmds runs LD, not CC, wlarc should be empty
+ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
+ # investigate it a little bit more. (MM)
+ wlarc='$wl'
+
+ # ancient GNU ld didn't support --whole-archive et. al.
+ if eval "`$CC -print-prog-name=ld` --help 2>&1" |
+ $GREP 'no-whole-archive' > /dev/null; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ else
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=
+ fi
+ else
+ with_gnu_ld=no
+ wlarc=
+
+ # A generic and very simple default shared library creation
+ # command for GNU C++ for the case where it uses the native
+ # linker, instead of GNU ld. If possible, this setting should
+ # overridden to take advantage of the native linker features on
+ # the platform it is being used on.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ fi
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ GXX=no
+ with_gnu_ld=no
+ wlarc=
+ fi
+
+ # PORTME: fill in a description of your system's C++ link characteristics
+ AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ case $host_os in
+ aix3*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aix[[4-9]]*)
+ if test ia64 = "$host_cpu"; then
+ # On IA64, the linker does run time linking by default, so we don't
+ # have to do anything special.
+ aix_use_runtimelinking=no
+ exp_sym_flag='-Bexport'
+ no_entry_flag=
+ else
+ aix_use_runtimelinking=no
+
+ # Test if we are trying to use run time linking or normal
+ # AIX style linking. If -brtl is somewhere in LDFLAGS, we
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
+ case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
+ for ld_flag in $LDFLAGS; do
+ case $ld_flag in
+ *-brtl*)
+ aix_use_runtimelinking=yes
+ break
+ ;;
+ esac
+ done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
+ ;;
+ esac
+
+ exp_sym_flag='-bexport'
+ no_entry_flag='-bnoentry'
+ fi
+
+ # When large executables or shared objects are built, AIX ld can
+ # have problems creating the table of contents. If linking a library
+ # or program results in "error TOC overflow" add -mminimal-toc to
+ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
+ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
+
+ _LT_TAGVAR(archive_cmds, $1)=''
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
+
+ if test yes = "$GXX"; then
+ case $host_os in aix4.[[012]]|aix4.[[012]].*)
+ # We only want to do this on AIX 4.2 and lower, the check
+ # below for broken collect2 doesn't work under 4.3+
+ collect2name=`$CC -print-prog-name=collect2`
+ if test -f "$collect2name" &&
+ strings "$collect2name" | $GREP resolve_lib_name >/dev/null
+ then
+ # We have reworked collect2
+ :
+ else
+ # We have old collect2
+ _LT_TAGVAR(hardcode_direct, $1)=unsupported
+ # It fails to find uninstalled libraries when the uninstalled
+ # path is not listed in the libpath. Setting hardcode_minus_L
+ # to unsupported forces relinking
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=
+ fi
+ esac
+ shared_flag='-shared'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
+ fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
+ else
+ # not using gcc
+ if test ia64 = "$host_cpu"; then
+ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
+ # chokes on -Wl,-G. The following line is correct:
+ shared_flag='-G'
+ else
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
+ else
+ shared_flag='$wl-bM:SRE'
+ fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
+ fi
+ fi
+
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
+ # It seems that -bexpall does not export symbols beginning with
+ # underscore (_), so it is better to generate a list of symbols to
+ # export.
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # Warning - without using the other runtime loading flags (-brtl),
+ # -berok will link without error, but may produce a broken library.
+ # The "-G" linker flag allows undefined symbols.
+ _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
+ # Determine the default libpath from the value encoded in an empty
+ # executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
+ else
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
+ _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
+ else
+ # Determine the default libpath from the value encoded in an
+ # empty executable.
+ _LT_SYS_MODULE_PATH_AIX([$1])
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ # Warning - without using the other run time loading flags,
+ # -berok will link without error, but may produce a broken library.
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
+ # We only use this code for GNU lds that support --whole-archive.
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+ else
+ # Exported symbols can be pulled into shared objects from archives
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
+ fi
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
+ fi
+ fi
+ ;;
+
+ beos*)
+ if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
+ # support --undefined. This deserves some investigation. FIXME
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ chorus*)
+ case $cc_basename in
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ cygwin* | mingw* | pw32* | cegcc*)
+ case $GXX,$cc_basename in
+ ,cl* | no,cl*)
+ # Native MSVC
+ # hardcode_libdir_flag_spec is actually meaningless, as there is
+ # no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=yes
+ _LT_TAGVAR(file_list_spec, $1)='@'
+ # Tell ltmain to make .lib files, not .a files.
+ libext=lib
+ # Tell ltmain to make .dll files, not .so files.
+ shrext_cmds=.dll
+ # FIXME: Setting linknames here is a bad hack.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
+ # The linker will not automatically build a static lib if we build a DLL.
+ # _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ # Don't use ranlib
+ _LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
+ _LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
+ ;;
+ *)
+ # g++
+ # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
+ # as there is no search path for DLLs.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ _LT_TAGVAR(always_export_symbols, $1)=no
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+
+ if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+ darwin* | rhapsody*)
+ _LT_DARWIN_LINKER_FEATURES($1)
+ ;;
+
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
+ dgux*)
+ case $cc_basename in
+ ec++*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ ghcx*)
+ # Green Hills C++ Compiler
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ freebsd2.*)
+ # C++ shared libraries reported to be fairly broken before
+ # switch to ELF
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ freebsd-elf*)
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ ;;
+
+ freebsd* | dragonfly*)
+ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
+ # conventions
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ haiku*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+
+ hpux9*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ hpux10*|hpux11*)
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ case $host_cpu in
+ hppa*64*|ia64*)
+ ;;
+ *)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ ;;
+ esac
+ fi
+ case $host_cpu in
+ hppa*64*|ia64*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ ;;
+ *)
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
+ # but as the default
+ # location of the library.
+ ;;
+ esac
+
+ case $cc_basename in
+ CC*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ aCC*)
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ case $host_cpu in
+ hppa*64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ ia64*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ ;;
+ esac
+ fi
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ interix[[3-9]]*)
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
+ # Instead, shared libraries are loaded at an image base (0x10000000 by
+ # default) and relocated if they conflict, which is a slow very memory
+ # consuming and fragmenting process. To avoid this, we pick a random,
+ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
+ # time. Moving up from 0x10000000 also allows more sbrk(2) space.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ ;;
+ irix5* | irix6*)
+ case $cc_basename in
+ CC*)
+ # SGI C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+
+ # Archives containing C++ object files must be created using
+ # "CC -ar", where "CC" is the IRIX C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
+ ;;
+ *)
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ else
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
+ fi
+ fi
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ ;;
+ esac
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+ _LT_TAGVAR(inherit_rpath, $1)=yes
+ ;;
+
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+
+ # Archives containing C++ object files must be created using
+ # "CC -Bstatic", where "CC" is the KAI C++ compiler.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
+ ;;
+ icpc* | ecpc* )
+ # Intel C++
+ with_gnu_ld=yes
+ # version 8.0 and above of icpc choke on multiply defined symbols
+ # if we add $predep_objects and $postdep_objects, however 7.1 and
+ # earlier do not add the objects themselves.
+ case `$CC -V 2>&1` in
+ *"Version 7."*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 8.0 or newer
+ tmp_idyn=
+ case $host_cpu in
+ ia64*) tmp_idyn=' -i_dynamic';;
+ esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
+ ;;
+ pgCC* | pgcpp*)
+ # Portland Group C++ compiler
+ case `$CC -V` in
+ *pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
+ _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
+ _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ *) # Version 6 and above use weak symbols
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ ;;
+ cxx*)
+ # Compaq C++
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
+
+ runpath_var=LD_RUN_PATH
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ ;;
+ xl* | mpixl* | bgxl*)
+ # IBM XL 8.0 on PPC, with GNU ld
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
+ fi
+ ;;
+ *)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*)
+ # Sun C++ 5.9
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
+ _LT_TAGVAR(compiler_needs_object, $1)=yes
+
+ # Not sure whether something based on
+ # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
+ # would be better.
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ esac
+ ;;
+ esac
+ ;;
+
+ lynxos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ m88k*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ mvs*)
+ case $cc_basename in
+ cxx*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ netbsd*)
+ if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
+ wlarc=
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ fi
+ # Workaround some broken pre-1.5 toolchains
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
+ ;;
+
+ *nto* | *qnx*)
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ ;;
+
+ openbsd* | bitrig*)
+ if test -f /usr/libexec/ld.so; then
+ _LT_TAGVAR(hardcode_direct, $1)=yes
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
+ fi
+ output_verbose_link_cmd=func_echo_all
+ else
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+
+ osf3* | osf4* | osf5*)
+ case $cc_basename in
+ KCC*)
+ # Kuck and Associates, Inc. (KAI) C++ Compiler
+
+ # KCC will only create a shared library if the output file
+ # ends with ".so" (or ".sl" for HP-UX), so rename the library
+ # to its proper name (with version) after linking.
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Archives containing C++ object files must be created using
+ # the KAI C++ compiler.
+ case $host in
+ osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
+ *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
+ esac
+ ;;
+ RCC*)
+ # Rational C++ 2.4.1
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ cxx*)
+ case $host in
+ osf3*)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ ;;
+ *)
+ _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ #
+ # There doesn't appear to be a way to prevent this compiler from
+ # explicitly linking system object files so we need to strip them
+ # from the output so that they don't get included in the library
+ # dependencies.
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ ;;
+ *)
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ case $host in
+ osf3*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ ;;
+ esac
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=:
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+
+ else
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ fi
+ ;;
+ esac
+ ;;
+
+ psos*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ sunos4*)
+ case $cc_basename in
+ CC*)
+ # Sun C++ 4.x
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ lcc*)
+ # Lucid
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ case $cc_basename in
+ CC* | sunCC*)
+ # Sun C++ 4.2, 5.x and Centerline C++
+ _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
+ _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ # The compiler driver will combine and reorder linker options,
+ # but understands '-z linker_flag'.
+ # Supported since Solaris 2.6 (maybe 2.5.1?)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
+ ;;
+ esac
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+
+ output_verbose_link_cmd='func_echo_all'
+
+ # Archives containing C++ object files must be created using
+ # "CC -xar", where "CC" is the Sun C++ compiler. This is
+ # necessary to make sure instantiated templates are included
+ # in the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
+ ;;
+ gcx*)
+ # Green Hills C++ Compiler
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+
+ # The C++ compiler must be used to create the archive.
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
+ ;;
+ *)
+ # GNU C++ compiler with Solaris linker
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
+ if $CC --version | $GREP -v '^2\.7' > /dev/null; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ else
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
+ # platform.
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+
+ # Commands to make compiler produce verbose output that lists
+ # what "hidden" libraries, object files and flags are used when
+ # linking a shared library.
+ output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
+ fi
+
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
+ case $host_os in
+ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
+ *)
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
+ ;;
+ esac
+ fi
+ ;;
+ esac
+ ;;
+
+ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ sysv5* | sco3.2v5* | sco5v6*)
+ # Note: We CANNOT use -z defs as we might desire, because we do not
+ # link with -lc, and that would cause any symbols used from libc to
+ # always be unresolved, which means just about no library would
+ # ever link correctly. If we're not using GNU ld we use -z text
+ # though, which does catch some bad symbols but isn't as heavy-handed
+ # as -z defs.
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
+ _LT_TAGVAR(archive_cmds_need_lc, $1)=no
+ _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
+ _LT_TAGVAR(link_all_deplibs, $1)=yes
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
+ runpath_var='LD_RUN_PATH'
+
+ case $cc_basename in
+ CC*)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ _LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
+ '"$_LT_TAGVAR(reload_cmds, $1)"
+ ;;
+ *)
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
+ tandem*)
+ case $cc_basename in
+ NCC*)
+ # NonStop-UX NCC 3.20
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+ ;;
+
+ vxworks*)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+
+ *)
+ # FIXME: insert proper C++ library support
+ _LT_TAGVAR(ld_shlibs, $1)=no
+ ;;
+ esac
+
+ AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
+ test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
+
+ _LT_TAGVAR(GCC, $1)=$GXX
+ _LT_TAGVAR(LD, $1)=$LD
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+ LDCXX=$LD
+ LD=$lt_save_LD
+ GCC=$lt_save_GCC
+ with_gnu_ld=$lt_save_with_gnu_ld
+ lt_cv_path_LDCXX=$lt_cv_path_LD
+ lt_cv_path_LD=$lt_save_path_LD
+ lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
+ lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
+fi # test yes != "$_lt_caught_CXX_error"
+
+AC_LANG_POP
+])# _LT_LANG_CXX_CONFIG
+
+
+# _LT_FUNC_STRIPNAME_CNF
+# ----------------------
+# func_stripname_cnf prefix suffix name
+# strip PREFIX and SUFFIX off of NAME.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+#
+# This function is identical to the (non-XSI) version of func_stripname,
+# except this one can be used by m4 code that may be executed by configure,
+# rather than the libtool script.
+m4_defun([_LT_FUNC_STRIPNAME_CNF],[dnl
+AC_REQUIRE([_LT_DECL_SED])
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
+func_stripname_cnf ()
+{
+ case @S|@2 in
+ .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+ *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
+ esac
+} # func_stripname_cnf
+])# _LT_FUNC_STRIPNAME_CNF
+
+
+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
+# ---------------------------------
+# Figure out "hidden" library dependencies from verbose
+# compiler output when linking a shared library.
+# Parse the compiler output and extract the necessary
+# objects, libraries and library flags.
+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+AC_REQUIRE([_LT_FUNC_STRIPNAME_CNF])dnl
+# Dependencies to place before and after the object being linked:
+_LT_TAGVAR(predep_objects, $1)=
+_LT_TAGVAR(postdep_objects, $1)=
+_LT_TAGVAR(predeps, $1)=
+_LT_TAGVAR(postdeps, $1)=
+_LT_TAGVAR(compiler_lib_search_path, $1)=
+
+dnl we can't use the lt_simple_compile_test_code here,
+dnl because it contains code intended for an executable,
+dnl not a library. It's possible we should let each
+dnl tag define a new lt_????_link_test_code variable,
+dnl but it's only used here...
+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
+int a;
+void foo (void) { a = 0; }
+_LT_EOF
+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
+class Foo
+{
+public:
+ Foo (void) { a = 0; }
+private:
+ int a;
+};
+_LT_EOF
+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer*4 a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
+ subroutine foo
+ implicit none
+ integer a
+ a=0
+ return
+ end
+_LT_EOF
+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
+public class foo {
+ private int a;
+ public void bar (void) {
+ a = 0;
+ }
+};
+_LT_EOF
+], [$1], [GO], [cat > conftest.$ac_ext <<_LT_EOF
+package foo
+func foo() {
+}
+_LT_EOF
+])
+
+_lt_libdeps_save_CFLAGS=$CFLAGS
+case "$CC $CFLAGS " in #(
+*\ -flto*\ *) CFLAGS="$CFLAGS -fno-lto" ;;
+*\ -fwhopr*\ *) CFLAGS="$CFLAGS -fno-whopr" ;;
+*\ -fuse-linker-plugin*\ *) CFLAGS="$CFLAGS -fno-use-linker-plugin" ;;
+esac
+
+dnl Parse the compiler output and extract the necessary
+dnl objects, libraries and library flags.
+if AC_TRY_EVAL(ac_compile); then
+ # Parse the compiler output and extract the necessary
+ # objects, libraries and library flags.
+
+ # Sentinel used to keep track of whether or not we are before
+ # the conftest object file.
+ pre_test_object_deps_done=no
+
+ for p in `eval "$output_verbose_link_cmd"`; do
+ case $prev$p in
+
+ -L* | -R* | -l*)
+ # Some compilers place space between "-{L,R}" and the path.
+ # Remove the space.
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
+ prev=$p
+ continue
+ fi
+
+ # Expand the sysroot to ease extracting the directories later.
+ if test -z "$prev"; then
+ case $p in
+ -L*) func_stripname_cnf '-L' '' "$p"; prev=-L; p=$func_stripname_result ;;
+ -R*) func_stripname_cnf '-R' '' "$p"; prev=-R; p=$func_stripname_result ;;
+ -l*) func_stripname_cnf '-l' '' "$p"; prev=-l; p=$func_stripname_result ;;
+ esac
+ fi
+ case $p in
+ =*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
+ esac
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
+ -L | -R)
+ # Internal compiler library paths should come after those
+ # provided the user. The postdeps already come after the
+ # user supplied libs so there is no need to process them.
+ if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
+ _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
+ else
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
+ fi
+ ;;
+ # The "-l" case would never come before the object being
+ # linked, so don't bother handling this case.
+ esac
+ else
+ if test -z "$_LT_TAGVAR(postdeps, $1)"; then
+ _LT_TAGVAR(postdeps, $1)=$prev$p
+ else
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
+ fi
+ fi
+ prev=
+ ;;
+
+ *.lto.$objext) ;; # Ignore GCC LTO objects
+ *.$objext)
+ # This assumes that the test object file only shows up
+ # once in the compiler output.
+ if test "$p" = "conftest.$objext"; then
+ pre_test_object_deps_done=yes
+ continue
+ fi
+
+ if test no = "$pre_test_object_deps_done"; then
+ if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
+ _LT_TAGVAR(predep_objects, $1)=$p
+ else
+ _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
+ fi
+ else
+ if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
+ _LT_TAGVAR(postdep_objects, $1)=$p
+ else
+ _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
+ fi
+ fi
+ ;;
+
+ *) ;; # Ignore the rest.
+
+ esac
+ done
+
+ # Clean up.
+ rm -f a.out a.exe
+else
+ echo "libtool.m4: error: problem compiling $1 test program"
+fi
+
+$RM -f confest.$objext
+CFLAGS=$_lt_libdeps_save_CFLAGS
+
+# PORTME: override above test on systems where it is broken
+m4_if([$1], [CXX],
+[case $host_os in
+interix[[3-9]]*)
+ # Interix 3.5 installs completely hosed .la files for C++, so rather than
+ # hack all around it, let's just trust "g++" to DTRT.
+ _LT_TAGVAR(predep_objects,$1)=
+ _LT_TAGVAR(postdep_objects,$1)=
+ _LT_TAGVAR(postdeps,$1)=
+ ;;
+esac
+])
+
+case " $_LT_TAGVAR(postdeps, $1) " in
+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
+esac
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=
+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
+fi
+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
+ [The directories searched by this compiler when creating a shared library])
+_LT_TAGDECL([], [predep_objects], [1],
+ [Dependencies to place before and after the objects being linked to
+ create a shared library])
+_LT_TAGDECL([], [postdep_objects], [1])
+_LT_TAGDECL([], [predeps], [1])
+_LT_TAGDECL([], [postdeps], [1])
+_LT_TAGDECL([], [compiler_lib_search_path], [1],
+ [The library search path used internally by the compiler when linking
+ a shared library])
+])# _LT_SYS_HIDDEN_LIBDEPS
+
+
+# _LT_LANG_F77_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for a Fortran 77 compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_F77_CONFIG],
+[AC_LANG_PUSH(Fortran 77)
+if test -z "$F77" || test no = "$F77"; then
+ _lt_disable_F77=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for f77 test sources.
+ac_ext=f
+
+# Object file extension for compiled f77 test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the F77 compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_disable_F77"; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${F77-"f77"}
+ CFLAGS=$FFLAGS
+ compiler=$CC
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+ GCC=$G77
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test no = "$can_build_shared" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test yes = "$enable_shared" && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test yes = "$enable_shared" || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)=$G77
+ _LT_TAGVAR(LD, $1)=$LD
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
+
+AC_LANG_POP
+])# _LT_LANG_F77_CONFIG
+
+
+# _LT_LANG_FC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for a Fortran compiler are
+# suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_FC_CONFIG],
+[AC_LANG_PUSH(Fortran)
+
+if test -z "$FC" || test no = "$FC"; then
+ _lt_disable_FC=yes
+fi
+
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+_LT_TAGVAR(allow_undefined_flag, $1)=
+_LT_TAGVAR(always_export_symbols, $1)=no
+_LT_TAGVAR(archive_expsym_cmds, $1)=
+_LT_TAGVAR(export_dynamic_flag_spec, $1)=
+_LT_TAGVAR(hardcode_direct, $1)=no
+_LT_TAGVAR(hardcode_direct_absolute, $1)=no
+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
+_LT_TAGVAR(hardcode_libdir_separator, $1)=
+_LT_TAGVAR(hardcode_minus_L, $1)=no
+_LT_TAGVAR(hardcode_automatic, $1)=no
+_LT_TAGVAR(inherit_rpath, $1)=no
+_LT_TAGVAR(module_cmds, $1)=
+_LT_TAGVAR(module_expsym_cmds, $1)=
+_LT_TAGVAR(link_all_deplibs, $1)=unknown
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+_LT_TAGVAR(no_undefined_flag, $1)=
+_LT_TAGVAR(whole_archive_flag_spec, $1)=
+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
+
+# Source file extension for fc test sources.
+ac_ext=${ac_fc_srcext-f}
+
+# Object file extension for compiled fc test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# No sense in running all these tests if we already determined that
+# the FC compiler isn't working. Some variables (like enable_shared)
+# are currently assumed to apply to all compilers on this platform,
+# and will be corrupted by setting them based on a non-working compiler.
+if test yes != "$_lt_disable_FC"; then
+ # Code to be used in simple compile tests
+ lt_simple_compile_test_code="\
+ subroutine t
+ return
+ end
+"
+
+ # Code to be used in simple link tests
+ lt_simple_link_test_code="\
+ program t
+ end
+"
+
+ # ltmain only uses $CC for tagged configurations so make sure $CC is set.
+ _LT_TAG_COMPILER
+
+ # save warnings/boilerplate of simple test code
+ _LT_COMPILER_BOILERPLATE
+ _LT_LINKER_BOILERPLATE
+
+ # Allow CC to be a program name with arguments.
+ lt_save_CC=$CC
+ lt_save_GCC=$GCC
+ lt_save_CFLAGS=$CFLAGS
+ CC=${FC-"f95"}
+ CFLAGS=$FCFLAGS
+ compiler=$CC
+ GCC=$ac_cv_fc_compiler_gnu
+
+ _LT_TAGVAR(compiler, $1)=$CC
+ _LT_CC_BASENAME([$compiler])
+
+ if test -n "$compiler"; then
+ AC_MSG_CHECKING([if libtool supports shared libraries])
+ AC_MSG_RESULT([$can_build_shared])
+
+ AC_MSG_CHECKING([whether to build shared libraries])
+ test no = "$can_build_shared" && enable_shared=no
+
+ # On AIX, shared libraries and static libraries use the same namespace, and
+ # are all built from PIC.
+ case $host_os in
+ aix3*)
+ test yes = "$enable_shared" && enable_static=no
+ if test -n "$RANLIB"; then
+ archive_cmds="$archive_cmds~\$RANLIB \$lib"
+ postinstall_cmds='$RANLIB $lib'
+ fi
+ ;;
+ aix[[4-9]]*)
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
+ fi
+ ;;
+ esac
+ AC_MSG_RESULT([$enable_shared])
+
+ AC_MSG_CHECKING([whether to build static libraries])
+ # Make sure either enable_shared or enable_static is yes.
+ test yes = "$enable_shared" || enable_static=yes
+ AC_MSG_RESULT([$enable_static])
+
+ _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+ _LT_TAGVAR(LD, $1)=$LD
+
+ ## CAVEAT EMPTOR:
+ ## There is no encapsulation within the following macros, do not change
+ ## the running order or otherwise move them around unless you know exactly
+ ## what you are doing...
+ _LT_SYS_HIDDEN_LIBDEPS($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_SYS_DYNAMIC_LINKER($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+ fi # test -n "$compiler"
+
+ GCC=$lt_save_GCC
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_FC"
+
+AC_LANG_POP
+])# _LT_LANG_FC_CONFIG
+
+
+# _LT_LANG_GCJ_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Java Compiler compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GCJ_CONFIG],
+[AC_REQUIRE([LT_PROG_GCJ])dnl
+AC_LANG_SAVE
+
+# Source file extension for Java test sources.
+ac_ext=java
+
+# Object file extension for compiled Java test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="class foo {}"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GCJ-"gcj"}
+CFLAGS=$GCJFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# GCJ did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GCJ_CONFIG
+
+
+# _LT_LANG_GO_CONFIG([TAG])
+# --------------------------
+# Ensure that the configuration variables for the GNU Go compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_GO_CONFIG],
+[AC_REQUIRE([LT_PROG_GO])dnl
+AC_LANG_SAVE
+
+# Source file extension for Go test sources.
+ac_ext=go
+
+# Object file extension for compiled Go test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code="package main; func main() { }"
+
+# Code to be used in simple link tests
+lt_simple_link_test_code='package main; func main() { }'
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=yes
+CC=${GOC-"gccgo"}
+CFLAGS=$GOFLAGS
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_TAGVAR(LD, $1)=$LD
+_LT_CC_BASENAME([$compiler])
+
+# Go did not exist at the time GCC didn't implicitly link libc in.
+_LT_TAGVAR(archive_cmds_need_lc, $1)=no
+
+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
+_LT_TAGVAR(reload_flag, $1)=$reload_flag
+_LT_TAGVAR(reload_cmds, $1)=$reload_cmds
+
+## CAVEAT EMPTOR:
+## There is no encapsulation within the following macros, do not change
+## the running order or otherwise move them around unless you know exactly
+## what you are doing...
+if test -n "$compiler"; then
+ _LT_COMPILER_NO_RTTI($1)
+ _LT_COMPILER_PIC($1)
+ _LT_COMPILER_C_O($1)
+ _LT_COMPILER_FILE_LOCKS($1)
+ _LT_LINKER_SHLIBS($1)
+ _LT_LINKER_HARDCODE_LIBPATH($1)
+
+ _LT_CONFIG($1)
+fi
+
+AC_LANG_RESTORE
+
+GCC=$lt_save_GCC
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_GO_CONFIG
+
+
+# _LT_LANG_RC_CONFIG([TAG])
+# -------------------------
+# Ensure that the configuration variables for the Windows resource compiler
+# are suitably defined. These variables are subsequently used by _LT_CONFIG
+# to write the compiler configuration to 'libtool'.
+m4_defun([_LT_LANG_RC_CONFIG],
+[AC_REQUIRE([LT_PROG_RC])dnl
+AC_LANG_SAVE
+
+# Source file extension for RC test sources.
+ac_ext=rc
+
+# Object file extension for compiled RC test sources.
+objext=o
+_LT_TAGVAR(objext, $1)=$objext
+
+# Code to be used in simple compile tests
+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
+
+# Code to be used in simple link tests
+lt_simple_link_test_code=$lt_simple_compile_test_code
+
+# ltmain only uses $CC for tagged configurations so make sure $CC is set.
+_LT_TAG_COMPILER
+
+# save warnings/boilerplate of simple test code
+_LT_COMPILER_BOILERPLATE
+_LT_LINKER_BOILERPLATE
+
+# Allow CC to be a program name with arguments.
+lt_save_CC=$CC
+lt_save_CFLAGS=$CFLAGS
+lt_save_GCC=$GCC
+GCC=
+CC=${RC-"windres"}
+CFLAGS=
+compiler=$CC
+_LT_TAGVAR(compiler, $1)=$CC
+_LT_CC_BASENAME([$compiler])
+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
+
+if test -n "$compiler"; then
+ :
+ _LT_CONFIG($1)
+fi
+
+GCC=$lt_save_GCC
+AC_LANG_RESTORE
+CC=$lt_save_CC
+CFLAGS=$lt_save_CFLAGS
+])# _LT_LANG_RC_CONFIG
+
+
+# LT_PROG_GCJ
+# -----------
+AC_DEFUN([LT_PROG_GCJ],
+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
+ [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
+ [AC_CHECK_TOOL(GCJ, gcj,)
+ test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
+ AC_SUBST(GCJFLAGS)])])[]dnl
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
+
+
+# LT_PROG_GO
+# ----------
+AC_DEFUN([LT_PROG_GO],
+[AC_CHECK_TOOL(GOC, gccgo,)
+])
+
+
+# LT_PROG_RC
+# ----------
+AC_DEFUN([LT_PROG_RC],
+[AC_CHECK_TOOL(RC, windres,)
+])
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_RC], [])
+
+
+# _LT_DECL_EGREP
+# --------------
+# If we don't have a new enough Autoconf to choose the best grep
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_EGREP],
+[AC_REQUIRE([AC_PROG_EGREP])dnl
+AC_REQUIRE([AC_PROG_FGREP])dnl
+test -z "$GREP" && GREP=grep
+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
+_LT_DECL([], [EGREP], [1], [An ERE matcher])
+_LT_DECL([], [FGREP], [1], [A literal string matcher])
+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
+AC_SUBST([GREP])
+])
+
+
+# _LT_DECL_OBJDUMP
+# --------------
+# If we don't have a new enough Autoconf to choose the best objdump
+# available, choose the one first in the user's PATH.
+m4_defun([_LT_DECL_OBJDUMP],
+[AC_CHECK_TOOL(OBJDUMP, objdump, false)
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
+AC_SUBST([OBJDUMP])
+])
+
+# _LT_DECL_DLLTOOL
+# ----------------
+# Ensure DLLTOOL variable is set.
+m4_defun([_LT_DECL_DLLTOOL],
+[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])
+AC_SUBST([DLLTOOL])
+])
+
+# _LT_DECL_SED
+# ------------
+# Check for a fully-functional sed program, that truncates
+# as few characters as possible. Prefer GNU sed if found.
+m4_defun([_LT_DECL_SED],
+[AC_PROG_SED
+test -z "$SED" && SED=sed
+Xsed="$SED -e 1s/^X//"
+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
+ [Sed that helps us avoid accidentally triggering echo(1) options like -n])
+])# _LT_DECL_SED
+
+m4_ifndef([AC_PROG_SED], [
+############################################################
+# NOTE: This macro has been submitted for inclusion into #
+# GNU Autoconf as AC_PROG_SED. When it is available in #
+# a released version of Autoconf we should remove this #
+# macro and use it instead. #
+############################################################
+
+m4_defun([AC_PROG_SED],
+[AC_MSG_CHECKING([for a sed that does not truncate output])
+AC_CACHE_VAL(lt_cv_path_SED,
+[# Loop through the user's path and test for sed and gsed.
+# Then use that list of sed's as ones to test for truncation.
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for lt_ac_prog in sed gsed; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
+ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
+ fi
+ done
+ done
+done
+IFS=$as_save_IFS
+lt_ac_max=0
+lt_ac_count=0
+# Add /usr/xpg4/bin/sed as it is typically found on Solaris
+# along with /bin/sed that truncates output.
+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
+ test ! -f "$lt_ac_sed" && continue
+ cat /dev/null > conftest.in
+ lt_ac_count=0
+ echo $ECHO_N "0123456789$ECHO_C" >conftest.in
+ # Check for GNU sed and select it if it is found.
+ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
+ lt_cv_path_SED=$lt_ac_sed
+ break
+ fi
+ while true; do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo >>conftest.nl
+ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
+ cmp -s conftest.out conftest.nl || break
+ # 10000 chars as input seems more than enough
+ test 10 -lt "$lt_ac_count" && break
+ lt_ac_count=`expr $lt_ac_count + 1`
+ if test "$lt_ac_count" -gt "$lt_ac_max"; then
+ lt_ac_max=$lt_ac_count
+ lt_cv_path_SED=$lt_ac_sed
+ fi
+ done
+done
+])
+SED=$lt_cv_path_SED
+AC_SUBST([SED])
+AC_MSG_RESULT([$SED])
+])#AC_PROG_SED
+])#m4_ifndef
+
+# Old name:
+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([LT_AC_PROG_SED], [])
+
+
+# _LT_CHECK_SHELL_FEATURES
+# ------------------------
+# Find out whether the shell is Bourne or XSI compatible,
+# or has some other useful features.
+m4_defun([_LT_CHECK_SHELL_FEATURES],
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+ lt_unset=unset
+else
+ lt_unset=false
+fi
+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
+
+# test EBCDIC or ASCII
+case `echo X|tr X '\101'` in
+ A) # ASCII based system
+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
+ lt_SP2NL='tr \040 \012'
+ lt_NL2SP='tr \015\012 \040\040'
+ ;;
+ *) # EBCDIC based system
+ lt_SP2NL='tr \100 \n'
+ lt_NL2SP='tr \r\n \100\100'
+ ;;
+esac
+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
+])# _LT_CHECK_SHELL_FEATURES
+
+
+# _LT_PATH_CONVERSION_FUNCTIONS
+# -----------------------------
+# Determine what file name conversion functions should be used by
+# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
+# for certain cross-compile configurations and native mingw.
+m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_MSG_CHECKING([how to convert $build file names to $host format])
+AC_CACHE_VAL(lt_cv_to_host_file_cmd,
+[case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_cygwin_to_w32
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_w32
+ ;;
+ esac
+ ;;
+ *-*-cygwin* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_host_file_cmd=func_convert_file_msys_to_cygwin
+ ;;
+ *-*-cygwin* )
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+ * ) # otherwise, assume *nix
+ lt_cv_to_host_file_cmd=func_convert_file_nix_to_cygwin
+ ;;
+ esac
+ ;;
+ * ) # unhandled hosts (and "normal" native builds)
+ lt_cv_to_host_file_cmd=func_convert_file_noop
+ ;;
+esac
+])
+to_host_file_cmd=$lt_cv_to_host_file_cmd
+AC_MSG_RESULT([$lt_cv_to_host_file_cmd])
+_LT_DECL([to_host_file_cmd], [lt_cv_to_host_file_cmd],
+ [0], [convert $build file names to $host format])dnl
+
+AC_MSG_CHECKING([how to convert $build file names to toolchain format])
+AC_CACHE_VAL(lt_cv_to_tool_file_cmd,
+[#assume ordinary cross tools, or native build.
+lt_cv_to_tool_file_cmd=func_convert_file_noop
+case $host in
+ *-*-mingw* )
+ case $build in
+ *-*-mingw* ) # actually msys
+ lt_cv_to_tool_file_cmd=func_convert_file_msys_to_w32
+ ;;
+ esac
+ ;;
+esac
+])
+to_tool_file_cmd=$lt_cv_to_tool_file_cmd
+AC_MSG_RESULT([$lt_cv_to_tool_file_cmd])
+_LT_DECL([to_tool_file_cmd], [lt_cv_to_tool_file_cmd],
+ [0], [convert $build files to toolchain format])dnl
+])# _LT_PATH_CONVERSION_FUNCTIONS
diff --git a/scripts/ltoptions.m4 b/scripts/ltoptions.m4
new file mode 100644
index 0000000..94b0829
--- /dev/null
+++ b/scripts/ltoptions.m4
@@ -0,0 +1,437 @@
+# Helper functions for option handling. -*- Autoconf -*-
+#
+# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+# Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 8 ltoptions.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
+
+
+# _LT_MANGLE_OPTION(MACRO-NAME, OPTION-NAME)
+# ------------------------------------------
+m4_define([_LT_MANGLE_OPTION],
+[[_LT_OPTION_]m4_bpatsubst($1__$2, [[^a-zA-Z0-9_]], [_])])
+
+
+# _LT_SET_OPTION(MACRO-NAME, OPTION-NAME)
+# ---------------------------------------
+# Set option OPTION-NAME for macro MACRO-NAME, and if there is a
+# matching handler defined, dispatch to it. Other OPTION-NAMEs are
+# saved as a flag.
+m4_define([_LT_SET_OPTION],
+[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
+m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
+ _LT_MANGLE_DEFUN([$1], [$2]),
+ [m4_warning([Unknown $1 option '$2'])])[]dnl
+])
+
+
+# _LT_IF_OPTION(MACRO-NAME, OPTION-NAME, IF-SET, [IF-NOT-SET])
+# ------------------------------------------------------------
+# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
+m4_define([_LT_IF_OPTION],
+[m4_ifdef(_LT_MANGLE_OPTION([$1], [$2]), [$3], [$4])])
+
+
+# _LT_UNLESS_OPTIONS(MACRO-NAME, OPTION-LIST, IF-NOT-SET)
+# -------------------------------------------------------
+# Execute IF-NOT-SET unless all options in OPTION-LIST for MACRO-NAME
+# are set.
+m4_define([_LT_UNLESS_OPTIONS],
+[m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [m4_ifdef(_LT_MANGLE_OPTION([$1], _LT_Option),
+ [m4_define([$0_found])])])[]dnl
+m4_ifdef([$0_found], [m4_undefine([$0_found])], [$3
+])[]dnl
+])
+
+
+# _LT_SET_OPTIONS(MACRO-NAME, OPTION-LIST)
+# ----------------------------------------
+# OPTION-LIST is a space-separated list of Libtool options associated
+# with MACRO-NAME. If any OPTION has a matching handler declared with
+# LT_OPTION_DEFINE, dispatch to that macro; otherwise complain about
+# the unknown option and exit.
+m4_defun([_LT_SET_OPTIONS],
+[# Set options
+m4_foreach([_LT_Option], m4_split(m4_normalize([$2])),
+ [_LT_SET_OPTION([$1], _LT_Option)])
+
+m4_if([$1],[LT_INIT],[
+ dnl
+ dnl Simply set some default values (i.e off) if boolean options were not
+ dnl specified:
+ _LT_UNLESS_OPTIONS([LT_INIT], [dlopen], [enable_dlopen=no
+ ])
+ _LT_UNLESS_OPTIONS([LT_INIT], [win32-dll], [enable_win32_dll=no
+ ])
+ dnl
+ dnl If no reference was made to various pairs of opposing options, then
+ dnl we run the default mode handler for the pair. For example, if neither
+ dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
+ dnl archives by default:
+ _LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
+ _LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
+ _LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
+ [_LT_ENABLE_FAST_INSTALL])
+ _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+ [_LT_WITH_AIX_SONAME([aix])])
+ ])
+])# _LT_SET_OPTIONS
+
+
+## --------------------------------- ##
+## Macros to handle LT_INIT options. ##
+## --------------------------------- ##
+
+# _LT_MANGLE_DEFUN(MACRO-NAME, OPTION-NAME)
+# -----------------------------------------
+m4_define([_LT_MANGLE_DEFUN],
+[[_LT_OPTION_DEFUN_]m4_bpatsubst(m4_toupper([$1__$2]), [[^A-Z0-9_]], [_])])
+
+
+# LT_OPTION_DEFINE(MACRO-NAME, OPTION-NAME, CODE)
+# -----------------------------------------------
+m4_define([LT_OPTION_DEFINE],
+[m4_define(_LT_MANGLE_DEFUN([$1], [$2]), [$3])[]dnl
+])# LT_OPTION_DEFINE
+
+
+# dlopen
+# ------
+LT_OPTION_DEFINE([LT_INIT], [dlopen], [enable_dlopen=yes
+])
+
+AU_DEFUN([AC_LIBTOOL_DLOPEN],
+[_LT_SET_OPTION([LT_INIT], [dlopen])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'dlopen' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN], [])
+
+
+# win32-dll
+# ---------
+# Declare package support for building win32 dll's.
+LT_OPTION_DEFINE([LT_INIT], [win32-dll],
+[enable_win32_dll=yes
+
+case $host in
+*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-cegcc*)
+ AC_CHECK_TOOL(AS, as, false)
+ AC_CHECK_TOOL(DLLTOOL, dlltool, false)
+ AC_CHECK_TOOL(OBJDUMP, objdump, false)
+ ;;
+esac
+
+test -z "$AS" && AS=as
+_LT_DECL([], [AS], [1], [Assembler program])dnl
+
+test -z "$DLLTOOL" && DLLTOOL=dlltool
+_LT_DECL([], [DLLTOOL], [1], [DLL creation program])dnl
+
+test -z "$OBJDUMP" && OBJDUMP=objdump
+_LT_DECL([], [OBJDUMP], [1], [Object dumper program])dnl
+])# win32-dll
+
+AU_DEFUN([AC_LIBTOOL_WIN32_DLL],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+_LT_SET_OPTION([LT_INIT], [win32-dll])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'win32-dll' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [])
+
+
+# _LT_ENABLE_SHARED([DEFAULT])
+# ----------------------------
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_SHARED],
+[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([shared],
+ [AS_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
+ [build shared libraries @<:@default=]_LT_ENABLE_SHARED_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_shared=yes ;;
+ no) enable_shared=no ;;
+ *)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
+
+ _LT_DECL([build_libtool_libs], [enable_shared], [0],
+ [Whether or not to build shared libraries])
+])# _LT_ENABLE_SHARED
+
+LT_OPTION_DEFINE([LT_INIT], [shared], [_LT_ENABLE_SHARED([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-shared], [_LT_ENABLE_SHARED([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[shared])
+])
+
+AC_DEFUN([AC_DISABLE_SHARED],
+[_LT_SET_OPTION([LT_INIT], [disable-shared])
+])
+
+AU_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
+AU_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_SHARED], [])
+dnl AC_DEFUN([AM_DISABLE_SHARED], [])
+
+
+
+# _LT_ENABLE_STATIC([DEFAULT])
+# ----------------------------
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_STATIC],
+[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([static],
+ [AS_HELP_STRING([--enable-static@<:@=PKGS@:>@],
+ [build static libraries @<:@default=]_LT_ENABLE_STATIC_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_static=yes ;;
+ no) enable_static=no ;;
+ *)
+ enable_static=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_static=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [enable_static=]_LT_ENABLE_STATIC_DEFAULT)
+
+ _LT_DECL([build_old_libs], [enable_static], [0],
+ [Whether or not to build static libraries])
+])# _LT_ENABLE_STATIC
+
+LT_OPTION_DEFINE([LT_INIT], [static], [_LT_ENABLE_STATIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-static], [_LT_ENABLE_STATIC([no])])
+
+# Old names:
+AC_DEFUN([AC_ENABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[static])
+])
+
+AC_DEFUN([AC_DISABLE_STATIC],
+[_LT_SET_OPTION([LT_INIT], [disable-static])
+])
+
+AU_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
+AU_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AM_ENABLE_STATIC], [])
+dnl AC_DEFUN([AM_DISABLE_STATIC], [])
+
+
+
+# _LT_ENABLE_FAST_INSTALL([DEFAULT])
+# ----------------------------------
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
+m4_define([_LT_ENABLE_FAST_INSTALL],
+[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
+AC_ARG_ENABLE([fast-install],
+ [AS_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
+ [optimize for fast installation @<:@default=]_LT_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
+ [p=${PACKAGE-default}
+ case $enableval in
+ yes) enable_fast_install=yes ;;
+ no) enable_fast_install=no ;;
+ *)
+ enable_fast_install=no
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for pkg in $enableval; do
+ IFS=$lt_save_ifs
+ if test "X$pkg" = "X$p"; then
+ enable_fast_install=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
+
+_LT_DECL([fast_install], [enable_fast_install], [0],
+ [Whether or not to optimize for fast installation])dnl
+])# _LT_ENABLE_FAST_INSTALL
+
+LT_OPTION_DEFINE([LT_INIT], [fast-install], [_LT_ENABLE_FAST_INSTALL([yes])])
+LT_OPTION_DEFINE([LT_INIT], [disable-fast-install], [_LT_ENABLE_FAST_INSTALL([no])])
+
+# Old names:
+AU_DEFUN([AC_ENABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the 'fast-install' option into LT_INIT's first parameter.])
+])
+
+AU_DEFUN([AC_DISABLE_FAST_INSTALL],
+[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you put
+the 'disable-fast-install' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_ENABLE_FAST_INSTALL], [])
+dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+
+
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+ AC_MSG_CHECKING([which variant of shared library versioning to provide])
+ AC_ARG_WITH([aix-soname],
+ [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+ [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+ [case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname],
+ [AC_CACHE_VAL([lt_cv_with_aix_soname],
+ [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+ with_aix_soname=$lt_cv_with_aix_soname])
+ AC_MSG_RESULT([$with_aix_soname])
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+ [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
+# _LT_WITH_PIC([MODE])
+# --------------------
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
+# LT_INIT options.
+# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
+m4_define([_LT_WITH_PIC],
+[AC_ARG_WITH([pic],
+ [AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
+ [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
+ [lt_p=${PACKAGE-default}
+ case $withval in
+ yes|no) pic_mode=$withval ;;
+ *)
+ pic_mode=default
+ # Look at the argument we got. We use all the common list separators.
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
+ for lt_pkg in $withval; do
+ IFS=$lt_save_ifs
+ if test "X$lt_pkg" = "X$lt_p"; then
+ pic_mode=yes
+ fi
+ done
+ IFS=$lt_save_ifs
+ ;;
+ esac],
+ [pic_mode=m4_default([$1], [default])])
+
+_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
+])# _LT_WITH_PIC
+
+LT_OPTION_DEFINE([LT_INIT], [pic-only], [_LT_WITH_PIC([yes])])
+LT_OPTION_DEFINE([LT_INIT], [no-pic], [_LT_WITH_PIC([no])])
+
+# Old name:
+AU_DEFUN([AC_LIBTOOL_PICMODE],
+[_LT_SET_OPTION([LT_INIT], [pic-only])
+AC_DIAGNOSE([obsolete],
+[$0: Remove this warning and the call to _LT_SET_OPTION when you
+put the 'pic-only' option into LT_INIT's first parameter.])
+])
+
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_LIBTOOL_PICMODE], [])
+
+## ----------------- ##
+## LTDL_INIT Options ##
+## ----------------- ##
+
+m4_define([_LTDL_MODE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [nonrecursive],
+ [m4_define([_LTDL_MODE], [nonrecursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [recursive],
+ [m4_define([_LTDL_MODE], [recursive])])
+LT_OPTION_DEFINE([LTDL_INIT], [subproject],
+ [m4_define([_LTDL_MODE], [subproject])])
+
+m4_define([_LTDL_TYPE], [])
+LT_OPTION_DEFINE([LTDL_INIT], [installable],
+ [m4_define([_LTDL_TYPE], [installable])])
+LT_OPTION_DEFINE([LTDL_INIT], [convenience],
+ [m4_define([_LTDL_TYPE], [convenience])])
diff --git a/scripts/ltsugar.m4 b/scripts/ltsugar.m4
new file mode 100644
index 0000000..48bc934
--- /dev/null
+++ b/scripts/ltsugar.m4
@@ -0,0 +1,124 @@
+# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
+#
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
+# Written by Gary V. Vaughan, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 6 ltsugar.m4
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTSUGAR_VERSION], [m4_if([0.1])])
+
+
+# lt_join(SEP, ARG1, [ARG2...])
+# -----------------------------
+# Produce ARG1SEPARG2...SEPARGn, omitting [] arguments and their
+# associated separator.
+# Needed until we can rely on m4_join from Autoconf 2.62, since all earlier
+# versions in m4sugar had bugs.
+m4_define([lt_join],
+[m4_if([$#], [1], [],
+ [$#], [2], [[$2]],
+ [m4_if([$2], [], [], [[$2]_])$0([$1], m4_shift(m4_shift($@)))])])
+m4_define([_lt_join],
+[m4_if([$#$2], [2], [],
+ [m4_if([$2], [], [], [[$1$2]])$0([$1], m4_shift(m4_shift($@)))])])
+
+
+# lt_car(LIST)
+# lt_cdr(LIST)
+# ------------
+# Manipulate m4 lists.
+# These macros are necessary as long as will still need to support
+# Autoconf-2.59, which quotes differently.
+m4_define([lt_car], [[$1]])
+m4_define([lt_cdr],
+[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
+ [$#], 1, [],
+ [m4_dquote(m4_shift($@))])])
+m4_define([lt_unquote], $1)
+
+
+# lt_append(MACRO-NAME, STRING, [SEPARATOR])
+# ------------------------------------------
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
+# Note that neither SEPARATOR nor STRING are expanded; they are appended
+# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
+# No SEPARATOR is output if MACRO-NAME was previously undefined (different
+# than defined and empty).
+#
+# This macro is needed until we can rely on Autoconf 2.62, since earlier
+# versions of m4sugar mistakenly expanded SEPARATOR but not STRING.
+m4_define([lt_append],
+[m4_define([$1],
+ m4_ifdef([$1], [m4_defn([$1])[$3]])[$2])])
+
+
+
+# lt_combine(SEP, PREFIX-LIST, INFIX, SUFFIX1, [SUFFIX2...])
+# ----------------------------------------------------------
+# Produce a SEP delimited list of all paired combinations of elements of
+# PREFIX-LIST with SUFFIX1 through SUFFIXn. Each element of the list
+# has the form PREFIXmINFIXSUFFIXn.
+# Needed until we can rely on m4_combine added in Autoconf 2.62.
+m4_define([lt_combine],
+[m4_if(m4_eval([$# > 3]), [1],
+ [m4_pushdef([_Lt_sep], [m4_define([_Lt_sep], m4_defn([lt_car]))])]]dnl
+[[m4_foreach([_Lt_prefix], [$2],
+ [m4_foreach([_Lt_suffix],
+ ]m4_dquote(m4_dquote(m4_shift(m4_shift(m4_shift($@)))))[,
+ [_Lt_sep([$1])[]m4_defn([_Lt_prefix])[$3]m4_defn([_Lt_suffix])])])])])
+
+
+# lt_if_append_uniq(MACRO-NAME, VARNAME, [SEPARATOR], [UNIQ], [NOT-UNIQ])
+# -----------------------------------------------------------------------
+# Iff MACRO-NAME does not yet contain VARNAME, then append it (delimited
+# by SEPARATOR if supplied) and expand UNIQ, else NOT-UNIQ.
+m4_define([lt_if_append_uniq],
+[m4_ifdef([$1],
+ [m4_if(m4_index([$3]m4_defn([$1])[$3], [$3$2$3]), [-1],
+ [lt_append([$1], [$2], [$3])$4],
+ [$5])],
+ [lt_append([$1], [$2], [$3])$4])])
+
+
+# lt_dict_add(DICT, KEY, VALUE)
+# -----------------------------
+m4_define([lt_dict_add],
+[m4_define([$1($2)], [$3])])
+
+
+# lt_dict_add_subkey(DICT, KEY, SUBKEY, VALUE)
+# --------------------------------------------
+m4_define([lt_dict_add_subkey],
+[m4_define([$1($2:$3)], [$4])])
+
+
+# lt_dict_fetch(DICT, KEY, [SUBKEY])
+# ----------------------------------
+m4_define([lt_dict_fetch],
+[m4_ifval([$3],
+ m4_ifdef([$1($2:$3)], [m4_defn([$1($2:$3)])]),
+ m4_ifdef([$1($2)], [m4_defn([$1($2)])]))])
+
+
+# lt_if_dict_fetch(DICT, KEY, [SUBKEY], VALUE, IF-TRUE, [IF-FALSE])
+# -----------------------------------------------------------------
+m4_define([lt_if_dict_fetch],
+[m4_if(lt_dict_fetch([$1], [$2], [$3]), [$4],
+ [$5],
+ [$6])])
+
+
+# lt_dict_filter(DICT, [SUBKEY], VALUE, [SEPARATOR], KEY, [...])
+# --------------------------------------------------------------
+m4_define([lt_dict_filter],
+[m4_if([$5], [], [],
+ [lt_join(m4_quote(m4_default([$4], [[, ]])),
+ lt_unquote(m4_split(m4_normalize(m4_foreach(_Lt_key, lt_car([m4_shiftn(4, $@)]),
+ [lt_if_dict_fetch([$1], _Lt_key, [$2], [$3], [_Lt_key ])])))))])[]dnl
+])
diff --git a/scripts/ltversion.m4 b/scripts/ltversion.m4
new file mode 100644
index 0000000..fa04b52
--- /dev/null
+++ b/scripts/ltversion.m4
@@ -0,0 +1,23 @@
+# ltversion.m4 -- version numbers -*- Autoconf -*-
+#
+# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
+# Written by Scott James Remnant, 2004
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# @configure_input@
+
+# serial 4179 ltversion.m4
+# This file is part of GNU Libtool
+
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
+
+AC_DEFUN([LTVERSION_VERSION],
+[macro_version='2.4.6'
+macro_revision='2.4.6'
+_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
+_LT_DECL(, macro_revision, 0)
+])
diff --git a/scripts/lt~obsolete.m4 b/scripts/lt~obsolete.m4
new file mode 100644
index 0000000..c6b26f8
--- /dev/null
+++ b/scripts/lt~obsolete.m4
@@ -0,0 +1,99 @@
+# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
+#
+# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+# Foundation, Inc.
+# Written by Scott James Remnant, 2004.
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+# serial 5 lt~obsolete.m4
+
+# These exist entirely to fool aclocal when bootstrapping libtool.
+#
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
+# which have later been changed to m4_define as they aren't part of the
+# exported API, or moved to Autoconf or Automake where they belong.
+#
+# The trouble is, aclocal is a bit thick. It'll see the old AC_DEFUN
+# in /usr/share/aclocal/libtool.m4 and remember it, then when it sees us
+# using a macro with the same name in our local m4/libtool.m4 it'll
+# pull the old libtool.m4 in (it doesn't see our shiny new m4_define
+# and doesn't know about Autoconf macros at all.)
+#
+# So we provide this file, which has a silly filename so it's always
+# included after everything else. This provides aclocal with the
+# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
+# because those macros already exist, or will be overwritten later.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+#
+# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
+# Yes, that means every name once taken will need to remain here until
+# we give up compatibility with versions before 1.7, at which point
+# we need to keep only those names which we still refer to.
+
+# This is to help aclocal find these macros, as it can't see m4_define.
+AC_DEFUN([LTOBSOLETE_VERSION], [m4_if([1])])
+
+m4_ifndef([AC_LIBTOOL_LINKER_OPTION], [AC_DEFUN([AC_LIBTOOL_LINKER_OPTION])])
+m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP])])
+m4_ifndef([_LT_AC_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_AC_SHELL_INIT], [AC_DEFUN([_LT_AC_SHELL_INIT])])
+m4_ifndef([_LT_AC_SYS_LIBPATH_AIX], [AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX])])
+m4_ifndef([_LT_PROG_LTMAIN], [AC_DEFUN([_LT_PROG_LTMAIN])])
+m4_ifndef([_LT_AC_TAGVAR], [AC_DEFUN([_LT_AC_TAGVAR])])
+m4_ifndef([AC_LTDL_ENABLE_INSTALL], [AC_DEFUN([AC_LTDL_ENABLE_INSTALL])])
+m4_ifndef([AC_LTDL_PREOPEN], [AC_DEFUN([AC_LTDL_PREOPEN])])
+m4_ifndef([_LT_AC_SYS_COMPILER], [AC_DEFUN([_LT_AC_SYS_COMPILER])])
+m4_ifndef([_LT_AC_LOCK], [AC_DEFUN([_LT_AC_LOCK])])
+m4_ifndef([AC_LIBTOOL_SYS_OLD_ARCHIVE], [AC_DEFUN([AC_LIBTOOL_SYS_OLD_ARCHIVE])])
+m4_ifndef([_LT_AC_TRY_DLOPEN_SELF], [AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF])])
+m4_ifndef([AC_LIBTOOL_PROG_CC_C_O], [AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O])])
+m4_ifndef([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS])])
+m4_ifndef([AC_LIBTOOL_OBJDIR], [AC_DEFUN([AC_LIBTOOL_OBJDIR])])
+m4_ifndef([AC_LTDL_OBJDIR], [AC_DEFUN([AC_LTDL_OBJDIR])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH])])
+m4_ifndef([AC_LIBTOOL_SYS_LIB_STRIP], [AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP])])
+m4_ifndef([AC_PATH_MAGIC], [AC_DEFUN([AC_PATH_MAGIC])])
+m4_ifndef([AC_PROG_LD_GNU], [AC_DEFUN([AC_PROG_LD_GNU])])
+m4_ifndef([AC_PROG_LD_RELOAD_FLAG], [AC_DEFUN([AC_PROG_LD_RELOAD_FLAG])])
+m4_ifndef([AC_DEPLIBS_CHECK_METHOD], [AC_DEFUN([AC_DEPLIBS_CHECK_METHOD])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI])])
+m4_ifndef([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE])])
+m4_ifndef([AC_LIBTOOL_PROG_COMPILER_PIC], [AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC])])
+m4_ifndef([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS])])
+m4_ifndef([AC_LIBTOOL_POSTDEP_PREDEP], [AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP])])
+m4_ifndef([LT_AC_PROG_EGREP], [AC_DEFUN([LT_AC_PROG_EGREP])])
+m4_ifndef([LT_AC_PROG_SED], [AC_DEFUN([LT_AC_PROG_SED])])
+m4_ifndef([_LT_CC_BASENAME], [AC_DEFUN([_LT_CC_BASENAME])])
+m4_ifndef([_LT_COMPILER_BOILERPLATE], [AC_DEFUN([_LT_COMPILER_BOILERPLATE])])
+m4_ifndef([_LT_LINKER_BOILERPLATE], [AC_DEFUN([_LT_LINKER_BOILERPLATE])])
+m4_ifndef([_AC_PROG_LIBTOOL], [AC_DEFUN([_AC_PROG_LIBTOOL])])
+m4_ifndef([AC_LIBTOOL_SETUP], [AC_DEFUN([AC_LIBTOOL_SETUP])])
+m4_ifndef([_LT_AC_CHECK_DLFCN], [AC_DEFUN([_LT_AC_CHECK_DLFCN])])
+m4_ifndef([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER])])
+m4_ifndef([_LT_AC_TAGCONFIG], [AC_DEFUN([_LT_AC_TAGCONFIG])])
+m4_ifndef([AC_DISABLE_FAST_INSTALL], [AC_DEFUN([AC_DISABLE_FAST_INSTALL])])
+m4_ifndef([_LT_AC_LANG_CXX], [AC_DEFUN([_LT_AC_LANG_CXX])])
+m4_ifndef([_LT_AC_LANG_F77], [AC_DEFUN([_LT_AC_LANG_F77])])
+m4_ifndef([_LT_AC_LANG_GCJ], [AC_DEFUN([_LT_AC_LANG_GCJ])])
+m4_ifndef([AC_LIBTOOL_LANG_C_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG])])
+m4_ifndef([_LT_AC_LANG_C_CONFIG], [AC_DEFUN([_LT_AC_LANG_C_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_CXX_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG])])
+m4_ifndef([_LT_AC_LANG_CXX_CONFIG], [AC_DEFUN([_LT_AC_LANG_CXX_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_F77_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG])])
+m4_ifndef([_LT_AC_LANG_F77_CONFIG], [AC_DEFUN([_LT_AC_LANG_F77_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_GCJ_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG])])
+m4_ifndef([_LT_AC_LANG_GCJ_CONFIG], [AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG])])
+m4_ifndef([AC_LIBTOOL_LANG_RC_CONFIG], [AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG])])
+m4_ifndef([_LT_AC_LANG_RC_CONFIG], [AC_DEFUN([_LT_AC_LANG_RC_CONFIG])])
+m4_ifndef([AC_LIBTOOL_CONFIG], [AC_DEFUN([AC_LIBTOOL_CONFIG])])
+m4_ifndef([_LT_AC_FILE_LTDLL_C], [AC_DEFUN([_LT_AC_FILE_LTDLL_C])])
+m4_ifndef([_LT_REQUIRED_DARWIN_CHECKS], [AC_DEFUN([_LT_REQUIRED_DARWIN_CHECKS])])
+m4_ifndef([_LT_AC_PROG_CXXCPP], [AC_DEFUN([_LT_AC_PROG_CXXCPP])])
+m4_ifndef([_LT_PREPARE_SED_QUOTE_VARS], [AC_DEFUN([_LT_PREPARE_SED_QUOTE_VARS])])
+m4_ifndef([_LT_PROG_ECHO_BACKSLASH], [AC_DEFUN([_LT_PROG_ECHO_BACKSLASH])])
+m4_ifndef([_LT_PROG_F77], [AC_DEFUN([_LT_PROG_F77])])
+m4_ifndef([_LT_PROG_FC], [AC_DEFUN([_LT_PROG_FC])])
+m4_ifndef([_LT_PROG_CXX], [AC_DEFUN([_LT_PROG_CXX])])
diff --git a/scripts/makefile.cegcc b/scripts/makefile.cegcc
index d85bed9..31d2078 100644
--- a/scripts/makefile.cegcc
+++ b/scripts/makefile.cegcc
@@ -23,7 +23,7 @@
VERMAJ = 1
VERMIN = 6
-VERMIC = 34
+VERMIC = 35
VER = $(VERMAJ).$(VERMIN).$(VERMIC)
NAME = libpng
PACKAGE = $(NAME)-$(VER)
diff --git a/scripts/makefile.linux b/scripts/makefile.linux
index f61087c..5568912 100644
--- a/scripts/makefile.linux
+++ b/scripts/makefile.linux
@@ -10,7 +10,7 @@
# Library name:
LIBNAME = libpng16
PNGMAJ = 16
-RELEASE = 34
+RELEASE = 35
# Shared library names:
LIBSO=$(LIBNAME).so
diff --git a/scripts/makefile.linux-opt b/scripts/makefile.linux-opt
index 017656c..d4a5e3b 100644
--- a/scripts/makefile.linux-opt
+++ b/scripts/makefile.linux-opt
@@ -10,7 +10,7 @@
# Library name:
LIBNAME = libpng16
PNGMAJ = 16
-RELEASE = 34
+RELEASE = 35
# Shared library names:
LIBSO=$(LIBNAME).so
diff --git a/scripts/makefile.msys b/scripts/makefile.msys
index 33b7721..209ad4f 100644
--- a/scripts/makefile.msys
+++ b/scripts/makefile.msys
@@ -18,7 +18,7 @@
# Library name:
LIBNAME = libpng16
PNGMAJ = 16
-RELEASE = 34
+RELEASE = 35
# Shared library names:
LIBSO=$(LIBNAME).dll
diff --git a/scripts/makefile.ne12bsd b/scripts/makefile.ne12bsd
index bc8dd8b..8a49035 100644
--- a/scripts/makefile.ne12bsd
+++ b/scripts/makefile.ne12bsd
@@ -17,7 +17,7 @@
LIB= png16
SHLIB_MAJOR= 0
-SHLIB_MINOR= 1.6.34
+SHLIB_MINOR= 1.6.35
SRCS= png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
pngwtran.c pngmem.c pngerror.c pngpread.c
diff --git a/scripts/makefile.netbsd b/scripts/makefile.netbsd
index ab1cedd..b1e8e95 100644
--- a/scripts/makefile.netbsd
+++ b/scripts/makefile.netbsd
@@ -17,7 +17,7 @@
LIB= png
SHLIB_MAJOR= 16
-SHLIB_MINOR= 1.6.34
+SHLIB_MINOR= 1.6.35
SRCS= png.c pngset.c pngget.c pngrutil.c pngtrans.c pngwutil.c \
pngread.c pngrio.c pngwio.c pngwrite.c pngrtran.c \
pngwtran.c pngmem.c pngerror.c pngpread.c
diff --git a/scripts/makefile.openbsd b/scripts/makefile.openbsd
index b32ea61..5edac0f 100644
--- a/scripts/makefile.openbsd
+++ b/scripts/makefile.openbsd
@@ -11,7 +11,7 @@
MANDIR= ${PREFIX}/man/cat
SHLIB_MAJOR= 16
-SHLIB_MINOR= 1.6.34
+SHLIB_MINOR= 1.6.35
LIB= png
SRCS= png.c pngerror.c pngget.c pngmem.c pngpread.c \
diff --git a/scripts/options.awk b/scripts/options.awk
index 81b82ff..fef5dfd 100755
--- a/scripts/options.awk
+++ b/scripts/options.awk
@@ -40,7 +40,7 @@
# the lines, for example by inserting spaces around operators, and all
# C preprocessors notice lines that start with '#', most remove comments.
# The technique adopted here is to make the final output lines into
- # C strings (enclosed in double quotes), preceeded by PNG_DFN. As a
+ # C strings (enclosed in double quotes), preceded by PNG_DFN. As a
# consequence the output cannot contain a 'raw' double quote - instead put
# @' in, this will be replaced by a single " afterward. See the parser
# script dfn.awk for more capabilities (not required here). Note that if
@@ -336,7 +336,7 @@
# chunk NAME [requires OPT] [enables LIST] [on|off|disabled]
# Expands to the 'option' settings appropriate to the reading and
-# writing of an ancilliary PNG chunk 'NAME':
+# writing of an ancillary PNG chunk 'NAME':
#
# option READ_NAME requires READ_ANCILLARY_CHUNKS [READ_OPT]
# option READ_NAME enables NAME LIST
@@ -805,8 +805,8 @@
print comment, "end of options", cend >out
# Do the 'setting' values second, the algorithm the standard
- # tree walk (O(1)) done in an O(2) while/for loop; interations
- # settings x depth, outputing the deepest required macros
+ # tree walk (O(1)) done in an O(2) while/for loop; iterations
+ # settings x depth, outputting the deepest required macros
# first.
print "" >out
print "/* SETTINGS */" >out
diff --git a/scripts/pnglibconf.dfa b/scripts/pnglibconf.dfa
index 52c0c74..b298a72 100644
--- a/scripts/pnglibconf.dfa
+++ b/scripts/pnglibconf.dfa
@@ -189,7 +189,7 @@
setting API_RULE default 0
-# This allows a prefix to be added to the front of every API functon name (and
+# This allows a prefix to be added to the front of every API function name (and
# therefore every symbol) by redefining all the function names with the prefix
# at the end of pnglibconf.h. It also turns on similar internal symbol renaming
# by causing a similar build-time only file, pngprefix.h, to be generated.
@@ -324,7 +324,7 @@
# By default recoverable errors on write should just generate warnings,
# not generally safe because this allows the application to write invalid
# PNG files. Applications should enable this themselves; it's useful
-# because it means that a failure to write an ancilliary chunk can often be
+# because it means that a failure to write an ancillary chunk can often be
# ignored.
option WARNINGS
@@ -395,7 +395,7 @@
option USER_LIMITS requires READ
# The default settings given below for the limits mean that libpng will
-# limit the size of images or the size of data in ancilliary chunks to less
+# limit the size of images or the size of data in ancillary chunks to less
# than the specification or implementation limits. Settings have the
# following interpretations:
#
@@ -559,7 +559,7 @@
option WRITE_CUSTOMIZE_COMPRESSION requires WRITE
# Any chunks you are not interested in, you can undef here. The
-# ones that allocate memory may be expecially important (hIST,
+# ones that allocate memory may be especially important (hIST,
# tEXt, zTXt, tRNS, pCAL). Others will just save time and make png_info
# a bit smaller.
@@ -715,7 +715,7 @@
setting ZBUF_SIZE default 8192
# This is the size of the decompression buffer used when counting or checking
-# the decompressed size of an LZ stream from a compressed ancilliary chunk; the
+# the decompressed size of an LZ stream from a compressed ancillary chunk; the
# decompressed data is never used so a different size may be optimal. This size
# was determined using contrib/libtests/timepng.c with compressed zTXt data
# around 11MByte in size. Slight speed improvements (up to about 14% in
diff --git a/scripts/pnglibconf.h.prebuilt b/scripts/pnglibconf.h.prebuilt
index 53b5e44..00acecc 100644
--- a/scripts/pnglibconf.h.prebuilt
+++ b/scripts/pnglibconf.h.prebuilt
@@ -1,10 +1,10 @@
-/* libpng 1.6.34 STANDARD API DEFINITION */
+/* libpng 1.6.35 STANDARD API DEFINITION */
/* pnglibconf.h - library build configuration */
-/* Libpng version 1.6.34 - September 29, 2017 */
+/* Libpng version 1.6.35 - July 15, 2018 */
-/* Copyright (c) 1998-2017 Glenn Randers-Pehrson */
+/* Copyright (c) 1998-2018 Glenn Randers-Pehrson */
/* This code is released under the libpng license. */
/* For conditions of distribution and use, see the disclaimer */
diff --git a/scripts/symbols.def b/scripts/symbols.def
index 5190190..a8f7ce2 100644
--- a/scripts/symbols.def
+++ b/scripts/symbols.def
@@ -1,4 +1,4 @@
-;Version 1.6.34
+;Version 1.6.35
;--------------------------------------------------------------
; LIBPNG symbol list as a Win32 DEF file
; Contains all the symbols that can be exported from libpng
diff --git a/test-driver b/test-driver
new file mode 100755
index 0000000..b8521a4
--- /dev/null
+++ b/test-driver
@@ -0,0 +1,148 @@
+#! /bin/sh
+# test-driver - basic testsuite driver script.
+
+scriptversion=2018-03-07.03; # UTC
+
+# Copyright (C) 2011-2018 Free Software Foundation, Inc.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+# Make unconditional expansion of undefined variables an error. This
+# helps a lot in preventing typo-related bugs.
+set -u
+
+usage_error ()
+{
+ echo "$0: $*" >&2
+ print_usage >&2
+ exit 2
+}
+
+print_usage ()
+{
+ cat <<END
+Usage:
+ test-driver --test-name=NAME --log-file=PATH --trs-file=PATH
+ [--expect-failure={yes|no}] [--color-tests={yes|no}]
+ [--enable-hard-errors={yes|no}] [--]
+ TEST-SCRIPT [TEST-SCRIPT-ARGUMENTS]
+The '--test-name', '--log-file' and '--trs-file' options are mandatory.
+END
+}
+
+test_name= # Used for reporting.
+log_file= # Where to save the output of the test script.
+trs_file= # Where to save the metadata of the test run.
+expect_failure=no
+color_tests=no
+enable_hard_errors=yes
+while test $# -gt 0; do
+ case $1 in
+ --help) print_usage; exit $?;;
+ --version) echo "test-driver $scriptversion"; exit $?;;
+ --test-name) test_name=$2; shift;;
+ --log-file) log_file=$2; shift;;
+ --trs-file) trs_file=$2; shift;;
+ --color-tests) color_tests=$2; shift;;
+ --expect-failure) expect_failure=$2; shift;;
+ --enable-hard-errors) enable_hard_errors=$2; shift;;
+ --) shift; break;;
+ -*) usage_error "invalid option: '$1'";;
+ *) break;;
+ esac
+ shift
+done
+
+missing_opts=
+test x"$test_name" = x && missing_opts="$missing_opts --test-name"
+test x"$log_file" = x && missing_opts="$missing_opts --log-file"
+test x"$trs_file" = x && missing_opts="$missing_opts --trs-file"
+if test x"$missing_opts" != x; then
+ usage_error "the following mandatory options are missing:$missing_opts"
+fi
+
+if test $# -eq 0; then
+ usage_error "missing argument"
+fi
+
+if test $color_tests = yes; then
+ # Keep this in sync with 'lib/am/check.am:$(am__tty_colors)'.
+ red='[0;31m' # Red.
+ grn='[0;32m' # Green.
+ lgn='[1;32m' # Light green.
+ blu='[1;34m' # Blue.
+ mgn='[0;35m' # Magenta.
+ std='[m' # No color.
+else
+ red= grn= lgn= blu= mgn= std=
+fi
+
+do_exit='rm -f $log_file $trs_file; (exit $st); exit $st'
+trap "st=129; $do_exit" 1
+trap "st=130; $do_exit" 2
+trap "st=141; $do_exit" 13
+trap "st=143; $do_exit" 15
+
+# Test script is run here.
+"$@" >$log_file 2>&1
+estatus=$?
+
+if test $enable_hard_errors = no && test $estatus -eq 99; then
+ tweaked_estatus=1
+else
+ tweaked_estatus=$estatus
+fi
+
+case $tweaked_estatus:$expect_failure in
+ 0:yes) col=$red res=XPASS recheck=yes gcopy=yes;;
+ 0:*) col=$grn res=PASS recheck=no gcopy=no;;
+ 77:*) col=$blu res=SKIP recheck=no gcopy=yes;;
+ 99:*) col=$mgn res=ERROR recheck=yes gcopy=yes;;
+ *:yes) col=$lgn res=XFAIL recheck=no gcopy=yes;;
+ *:*) col=$red res=FAIL recheck=yes gcopy=yes;;
+esac
+
+# Report the test outcome and exit status in the logs, so that one can
+# know whether the test passed or failed simply by looking at the '.log'
+# file, without the need of also peaking into the corresponding '.trs'
+# file (automake bug#11814).
+echo "$res $test_name (exit status: $estatus)" >>$log_file
+
+# Report outcome to console.
+echo "${col}${res}${std}: $test_name"
+
+# Register the test result, and other relevant metadata.
+echo ":test-result: $res" > $trs_file
+echo ":global-test-result: $res" >> $trs_file
+echo ":recheck: $recheck" >> $trs_file
+echo ":copy-in-global-log: $gcopy" >> $trs_file
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:
