docs/faq.rst - third_party/iperf - Git at Google

 .. _faq:

 iperf3 FAQ
 ==========

 What is the history of iperf3, and what is the difference between iperf2 and iperf3?
   iperf2 was orphaned in the late 2000s at version 2.0.5, despite some
   known bugs and issues. After spending some time trying to fix
   iperf2's problems, ESnet decided by 2010 that a new, simpler tool
   was needed, and began development of iperf3. The goal was make the
   tool as simple as possible, so others could contribute to the code
   base. For this reason, it was decided to make the tool single
   threaded, and not worry about backwards compatibility with
   iperf2. Many of the feature requests for iperf3 came from the
   perfSONAR project (http://www.perfsonar.net).

   Then in 2014, Bob (Robert) McMahon from Broadcom restarted
   development of iperf2 (See
   https://sourceforge.net/projects/iperf2/). He fixed many of the
   problems with iperf2, and added a number of new features similar to
   iperf3. iperf2.0.8, released in 2015, made iperf2 a useful tool. iperf2's
   current development is focused is on using UDP for latency testing, as well
   as broad platform support.

   As of this writing (2017), both iperf2 and iperf3 are being actively
   (although independently) developed.  We recommend being familiar with
   both tools, and use whichever tool’s features best match your needs.

   A feature comparison of iperf2, iperf3, and nuttcp is available at:
   https://fasterdata.es.net/performance-testing/network-troubleshooting-tools/throughput-tool-comparision/

 iperf3 parallel stream performance is much less than iperf2. Why?
   iperf3 is single threaded, and iperf2 is multi-threaded. We
   recommend using iperf2 for parallel streams.
   If you want to use multiple iperf3 streams use the method described `here <https://fasterdata.es.net/performance-testing/network-troubleshooting-tools/iperf/multi-stream-iperf3/>`_.

 I’m trying to use iperf3 on Windows, but having trouble. What should I do?
   iperf3 is not officially supported on Windows, but iperf2 is. We
   recommend you use iperf2.

   Some people are using Cygwin to run iperf3 in Windows, but not all
   options will work.  Some community-provided binaries of iperf3 for
   Windows exist.

 How can I build a statically-linked executable of iperf3?
   There are a number of reasons for building an iperf3 executable with
   no dependencies on any shared libraries.  Unfortunately this isn't
   quite a straight-forward process.

   The steps below have nominally been tested on CentOS 7.4, but
   can probably be adapted for use with other Linux distributions:

   #.  If necessary, install the static C libraries; for CentOS this is
       the ``glibc-static`` package.

   #.  If OpenSSL is installed, be sure that its static libraries are
       also installed, from the ``openssl-static`` package.

   #.  Be sure that ``lksctp-*`` packages are not installed, because
       as of this writing, there do not appear to be any static
       libraries available for SCTP.

   #.  Configure iperf3 thusly: ``configure "LDFLAGS=--static"
       --disable-shared`` These options are necessary to disable the
       generation of shared libraries and link the executable
       statically.

   #.  Compile as normal.

   It appears that for FreeBSD (tested on FreeBSD 11.1-RELEASE), only
   the last two steps are needed to produce a static executable.

 I'm seeing quite a bit of unexpected UDP loss. Why?
   First, confirm you are using iperf 3.1.5 or higher. There was an
   issue with the default UDP send size that was fixed in
   3.1.5. Second, try adding the flag ``-w2M`` to increase the socket
   buffer sizes. That seems to make a big difference on some hosts.

 iperf3 UDP does not seem to work at bandwidths less than 100Kbps. Why?
   You'll need to reduce the default packet length to get UDP rates of less that 100Kbps. Try ``-l100``.

 What congestion control algorithms are supported?
   On Linux, run this command to see the available congestion control
   algorithms (note that some algorithms are packaged as kernel
   modules, which must be loaded before they can be used)::

     /sbin/sysctl net.ipv4.tcp_available_congestion_control

 I’m using the ``--logfile`` option. How do I see file output in real time?
   Use the ``--forceflush`` flag.

 I'm using the --fq-rate flag, but it does not seem to be working. Why?
   You need to add 'net.core.default_qdisc = fq' to /etc/sysctl.conf for that option to work.

 I'm having trouble getting iperf3 to work on Windows, Android, etc. Where can I get help?
   iperf3 only supports Linux, FreeBSD, and OSX. For other platforms we recommend using iperf2.

 I managed to get a Windows executable built, but why do I get a BSOD on Windows 7?
   There seems to be a bug in Windows 7 where running iperf3 from a
   network filesystem can cause a system crash (in other words Blue
   Screen of Death, or BSOD).  This is a Windows bug addressed in kb2839149:

   https://support.microsoft.com/en-us/help/2839149/stop-error-0x00000027-in-the-rdbss-sys-process-in-windows-7-or-windows

   A hotfix is available under kb2732673:

   https://support.microsoft.com/en-us/help/2732673/-delayed-write-failed-error-message-when--pst-files-are-stored-on-a-ne

 Why can’t I run a UDP client with no server?
   This is potentially dangerous, and an attacker could use this for a
   denial of service attack.  We don't want iperf3 to be an attack tool.

 I'm trying to use iperf3 to test a 40G/100G link...What do I need to know?
   See the following pages on fasterdata.es.net:

    - https://fasterdata.es.net/host-tuning/100g-tuning/
    - https://fasterdata.es.net/performance-testing/network-troubleshooting-tools/iperf/multi-stream-iperf3/

 My receiver didn't get all the bytes that got sent but there was no loss.  Huh?
   iperf3 uses a control connection between the client and server to
   manage the start and end of each test.  Sometimes the commands on
   the control connection can be received and acted upon before all of
   the test data has been processed.  Thus the test ends with data
   still in flight.  This effect can be significant for short (a few
   seconds) tests, but is probably negligible for longer tests.

 A file sent using the ``-F`` option got corrupted...what happened?
   The ``-F`` option to iperf3 is not a file transfer utility.  It's a
   way of testing the end-to-end performance of a file transfer,
   including filesystem and disk overheads.  So while the test will
   mimic an actual file transfer, the data stored to disk may not be
   the same as what was sent.  In particular, the file size will be
   rounded up to the next larger multiple of the transfer block size,
   and for UDP tests, iperf's metadata (containing timestamps and
   sequence numbers) will overwrite the start of every UDP packet
   payload.

 I have a question regarding iperf3...what's the best way to get help?
   Searching on the Internet is a good first step.
   http://stackoverflow.com/ has a number of iperf3-related questions
   and answers, but a simple query into your favorite search engine can
   also yield some results.

   There is a mailing list nominally used for iperf3 development,
   iperf-dev@googlegroups.com.

   We discourage the use of the iperf3 issue tracker on GitHub for
   support questions.  Actual bug reports, enhancement requests, or
   pull requests are encouraged, however.
	.. _faq:

	iperf3 FAQ
	==========

	What is the history of iperf3, and what is the difference between iperf2 and iperf3?
	iperf2 was orphaned in the late 2000s at version 2.0.5, despite some
	known bugs and issues. After spending some time trying to fix
	iperf2's problems, ESnet decided by 2010 that a new, simpler tool
	was needed, and began development of iperf3. The goal was make the
	tool as simple as possible, so others could contribute to the code
	base. For this reason, it was decided to make the tool single
	threaded, and not worry about backwards compatibility with
	iperf2. Many of the feature requests for iperf3 came from the
	perfSONAR project (http://www.perfsonar.net).

	Then in 2014, Bob (Robert) McMahon from Broadcom restarted
	development of iperf2 (See
	https://sourceforge.net/projects/iperf2/). He fixed many of the
	problems with iperf2, and added a number of new features similar to
	iperf3. iperf2.0.8, released in 2015, made iperf2 a useful tool. iperf2's
	current development is focused is on using UDP for latency testing, as well
	as broad platform support.

	As of this writing (2017), both iperf2 and iperf3 are being actively
	(although independently) developed. We recommend being familiar with
	both tools, and use whichever tool’s features best match your needs.

	A feature comparison of iperf2, iperf3, and nuttcp is available at:
	https://fasterdata.es.net/performance-testing/network-troubleshooting-tools/throughput-tool-comparision/

	iperf3 parallel stream performance is much less than iperf2. Why?
	iperf3 is single threaded, and iperf2 is multi-threaded. We
	recommend using iperf2 for parallel streams.
	If you want to use multiple iperf3 streams use the method described `here <https://fasterdata.es.net/performance-testing/network-troubleshooting-tools/iperf/multi-stream-iperf3/>`_.

	I’m trying to use iperf3 on Windows, but having trouble. What should I do?
	iperf3 is not officially supported on Windows, but iperf2 is. We
	recommend you use iperf2.

	Some people are using Cygwin to run iperf3 in Windows, but not all
	options will work. Some community-provided binaries of iperf3 for
	Windows exist.

	How can I build a statically-linked executable of iperf3?
	There are a number of reasons for building an iperf3 executable with
	no dependencies on any shared libraries. Unfortunately this isn't
	quite a straight-forward process.

	The steps below have nominally been tested on CentOS 7.4, but
	can probably be adapted for use with other Linux distributions:

	#. If necessary, install the static C libraries; for CentOS this is
	the ``glibc-static`` package.

	#. If OpenSSL is installed, be sure that its static libraries are
	also installed, from the ``openssl-static`` package.

	#. Be sure that ``lksctp-*`` packages are not installed, because
	as of this writing, there do not appear to be any static
	libraries available for SCTP.

	#. Configure iperf3 thusly: ``configure "LDFLAGS=--static"
	--disable-shared`` These options are necessary to disable the
	generation of shared libraries and link the executable
	statically.

	#. Compile as normal.

	It appears that for FreeBSD (tested on FreeBSD 11.1-RELEASE), only
	the last two steps are needed to produce a static executable.

	I'm seeing quite a bit of unexpected UDP loss. Why?
	First, confirm you are using iperf 3.1.5 or higher. There was an
	issue with the default UDP send size that was fixed in
	3.1.5. Second, try adding the flag ``-w2M`` to increase the socket
	buffer sizes. That seems to make a big difference on some hosts.

	iperf3 UDP does not seem to work at bandwidths less than 100Kbps. Why?
	You'll need to reduce the default packet length to get UDP rates of less that 100Kbps. Try ``-l100``.

	What congestion control algorithms are supported?
	On Linux, run this command to see the available congestion control
	algorithms (note that some algorithms are packaged as kernel
	modules, which must be loaded before they can be used)::

	/sbin/sysctl net.ipv4.tcp_available_congestion_control

	I’m using the ``--logfile`` option. How do I see file output in real time?
	Use the ``--forceflush`` flag.

	I'm using the --fq-rate flag, but it does not seem to be working. Why?
	You need to add 'net.core.default_qdisc = fq' to /etc/sysctl.conf for that option to work.

	I'm having trouble getting iperf3 to work on Windows, Android, etc. Where can I get help?
	iperf3 only supports Linux, FreeBSD, and OSX. For other platforms we recommend using iperf2.

	I managed to get a Windows executable built, but why do I get a BSOD on Windows 7?
	There seems to be a bug in Windows 7 where running iperf3 from a
	network filesystem can cause a system crash (in other words Blue
	Screen of Death, or BSOD). This is a Windows bug addressed in kb2839149:

	https://support.microsoft.com/en-us/help/2839149/stop-error-0x00000027-in-the-rdbss-sys-process-in-windows-7-or-windows

	A hotfix is available under kb2732673:

	https://support.microsoft.com/en-us/help/2732673/-delayed-write-failed-error-message-when--pst-files-are-stored-on-a-ne

	Why can’t I run a UDP client with no server?
	This is potentially dangerous, and an attacker could use this for a
	denial of service attack. We don't want iperf3 to be an attack tool.

	I'm trying to use iperf3 to test a 40G/100G link...What do I need to know?
	See the following pages on fasterdata.es.net:

	- https://fasterdata.es.net/host-tuning/100g-tuning/
	- https://fasterdata.es.net/performance-testing/network-troubleshooting-tools/iperf/multi-stream-iperf3/

	My receiver didn't get all the bytes that got sent but there was no loss. Huh?
	iperf3 uses a control connection between the client and server to
	manage the start and end of each test. Sometimes the commands on
	the control connection can be received and acted upon before all of
	the test data has been processed. Thus the test ends with data
	still in flight. This effect can be significant for short (a few
	seconds) tests, but is probably negligible for longer tests.

	A file sent using the ``-F`` option got corrupted...what happened?
	The ``-F`` option to iperf3 is not a file transfer utility. It's a
	way of testing the end-to-end performance of a file transfer,
	including filesystem and disk overheads. So while the test will
	mimic an actual file transfer, the data stored to disk may not be
	the same as what was sent. In particular, the file size will be
	rounded up to the next larger multiple of the transfer block size,
	and for UDP tests, iperf's metadata (containing timestamps and
	sequence numbers) will overwrite the start of every UDP packet
	payload.

	I have a question regarding iperf3...what's the best way to get help?
	Searching on the Internet is a good first step.
	http://stackoverflow.com/ has a number of iperf3-related questions
	and answers, but a simple query into your favorite search engine can
	also yield some results.

	There is a mailing list nominally used for iperf3 development,
	iperf-dev@googlegroups.com.

	We discourage the use of the iperf3 issue tracker on GitHub for
	support questions. Actual bug reports, enhancement requests, or
	pull requests are encouraged, however.