* Add man page to autoconf goo
* Bump the version in autoconf
* Add missing LICENSE file
diff --git a/ChangeLog b/ChangeLog
index c40208e..8cb104a 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,16 @@
+2008-04-07 Jon Dugan <jdugan@x1024.net>
+
+* Add man page to autoconf goo
+* Bump the version in autoconf
+* Add missing LICENSE file
+
+2008-04-04 Jon Dugan <jdugan@x1024.net>
+
+* Incorporate help string fixes from Claus Klein
+* Incorporate patch to restore header line in stats output from Claus Klein
+* Reworked help string code to remove redundancy
+* Add initial man page
+
2008-03-19 Stephen Hemminger <shemminger@linux-foundation.org>
* Add new option to allow selecting the sender congestion control
diff --git a/LICENSE b/LICENSE
new file mode 100644
index 0000000..9a8683d
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1,40 @@
+Copyright (c) 1999-2007, The Board of Trustees of the University of Illinois
+All Rights Reserved.
+
+Iperf performance test
+Mark Gates
+Ajay Tirumala
+Jim Ferguson
+Jon Dugan
+Feng Qin
+Kevin Gibbs
+John Estabrook
+National Laboratory for Applied Network Research
+National Center for Supercomputing Applications
+University of Illinois at Urbana-Champaign
+http://www.ncsa.uiuc.edu
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software (Iperf) and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation the
+rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+sell copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+
+Redistributions of source code must retain the above copyright notice, this
+list of conditions and the following disclaimers.
+
+Redistributions in binary form must reproduce the above copyright notice, this
+list of conditions and the following disclaimers in the documentation and/or
+other materials provided with the distribution.
+
+Neither the names of the University of Illinois, NCSA, nor the names of its
+contributors may be used to endorse or promote products derived from this
+Software without specific prior written permission. THE SOFTWARE IS PROVIDED
+"AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT
+LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
+AND NONINFRINGEMENT. IN NO EVENT SHALL THE CONTIBUTORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
+CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
diff --git a/Makefile.am b/Makefile.am
index 26b258a..cb100d9 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -1,4 +1,5 @@
-SUBDIRS = compat doc include src
+AUTOMAKE_OPTIONS = foreign
+SUBDIRS = compat doc include src man
AM_CPPFLAGS = @STRIP_BEGIN@ \
-I$(top_srcdir)/include \
diff --git a/Makefile.in b/Makefile.in
index 9a77fed..dfc0188 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -176,7 +176,8 @@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
-SUBDIRS = compat doc include src
+AUTOMAKE_OPTIONS = foreign
+SUBDIRS = compat doc include src man
AM_CPPFLAGS = @STRIP_BEGIN@ \
-I$(top_srcdir)/include \
-I$(top_builddir)/include \
diff --git a/aclocal.m4 b/aclocal.m4
index 15ecea1..66def51 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -11,6 +11,31 @@
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
+# isc-posix.m4 serial 2 (gettext-0.11.2)
+dnl Copyright (C) 1995-2002 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+# This file is not needed with autoconf-2.53 and newer. Remove it in 2005.
+
+# This test replaces the one in autoconf.
+# Currently this macro should have the same name as the autoconf macro
+# because gettext's gettext.m4 (distributed in the automake package)
+# still uses it. Otherwise, the use in gettext.m4 makes autoheader
+# give these diagnostics:
+# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
+# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX
+
+undefine([AC_ISC_POSIX])
+
+AC_DEFUN([AC_ISC_POSIX],
+ [
+ dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
+ AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
+ ]
+)
+
# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
diff --git a/configure b/configure
index 8e250c3..27a5ce7 100755
--- a/configure
+++ b/configure
@@ -1,6 +1,6 @@
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.60 for Iperf 2.0.2.
+# Generated by GNU Autoconf 2.60 for Iperf 2.0.4.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
@@ -557,8 +557,8 @@
# Identity of this package.
PACKAGE_NAME='Iperf'
PACKAGE_TARNAME='iperf'
-PACKAGE_VERSION='2.0.2'
-PACKAGE_STRING='Iperf 2.0.2'
+PACKAGE_VERSION='2.0.4'
+PACKAGE_STRING='Iperf 2.0.4'
PACKAGE_BUGREPORT=''
# Factoring default headers for most tests.
@@ -1215,7 +1215,7 @@
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures Iperf 2.0.2 to adapt to many kinds of systems.
+\`configure' configures Iperf 2.0.4 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
@@ -1285,7 +1285,7 @@
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of Iperf 2.0.2:";;
+ short | recursive ) echo "Configuration of Iperf 2.0.4:";;
esac
cat <<\_ACEOF
@@ -1374,7 +1374,7 @@
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
-Iperf configure 2.0.2
+Iperf configure 2.0.4
generated by GNU Autoconf 2.60
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
@@ -1388,7 +1388,7 @@
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by Iperf $as_me 2.0.2, which was
+It was created by Iperf $as_me 2.0.4, which was
generated by GNU Autoconf 2.60. Invocation command line was
$ $0 $@
@@ -2060,7 +2060,7 @@
# Define the identity of the package.
PACKAGE='iperf'
- VERSION='2.0.2'
+ VERSION='2.0.4'
cat >>confdefs.h <<_ACEOF
@@ -3960,12 +3960,14 @@
CFLAGS=`echo " $CFLAGS " | sed -e "s/ -g / /"` # do not want it implicitly
-{ echo "$as_me:$LINENO: checking for library containing strerror" >&5
-echo $ECHO_N "checking for library containing strerror... $ECHO_C" >&6; }
-if test "${ac_cv_search_strerror+set}" = set; then
+
+ { echo "$as_me:$LINENO: checking for strerror in -lcposix" >&5
+echo $ECHO_N "checking for strerror in -lcposix... $ECHO_C" >&6; }
+if test "${ac_cv_lib_cposix_strerror+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_func_search_save_LIBS=$LIBS
+ ac_check_lib_save_LIBS=$LIBS
+LIBS="-lcposix $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -3988,14 +3990,7 @@
return 0;
}
_ACEOF
-for ac_lib in '' cposix; do
- if test -z "$ac_lib"; then
- ac_res="none required"
- else
- ac_res=-l$ac_lib
- LIBS="-l$ac_lib $ac_func_search_save_LIBS"
- fi
- rm -f conftest.$ac_objext conftest$ac_exeext
+rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
@@ -4029,35 +4024,25 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_search_strerror=$ac_res
+ ac_cv_lib_cposix_strerror=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-
+ ac_cv_lib_cposix_strerror=no
fi
rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext
- if test "${ac_cv_search_strerror+set}" = set; then
- break
+ conftest$ac_exeext conftest.$ac_ext
+LIBS=$ac_check_lib_save_LIBS
fi
-done
-if test "${ac_cv_search_strerror+set}" = set; then
- :
-else
- ac_cv_search_strerror=no
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_cposix_strerror" >&5
+echo "${ECHO_T}$ac_cv_lib_cposix_strerror" >&6; }
+if test $ac_cv_lib_cposix_strerror = yes; then
+ LIBS="$LIBS -lcposix"
fi
-rm conftest.$ac_ext
-LIBS=$ac_func_search_save_LIBS
-fi
-{ echo "$as_me:$LINENO: result: $ac_cv_search_strerror" >&5
-echo "${ECHO_T}$ac_cv_search_strerror" >&6; }
-ac_res=$ac_cv_search_strerror
-if test "$ac_res" != no; then
- test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
-fi
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -14296,7 +14281,7 @@
-ac_config_files="$ac_config_files Makefile compat/Makefile doc/Makefile include/Makefile src/Makefile"
+ac_config_files="$ac_config_files Makefile compat/Makefile doc/Makefile include/Makefile src/Makefile man/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
@@ -14702,7 +14687,7 @@
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
-This file was extended by Iperf $as_me 2.0.2, which was
+This file was extended by Iperf $as_me 2.0.4, which was
generated by GNU Autoconf 2.60. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
@@ -14755,7 +14740,7 @@
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-Iperf config.status 2.0.2
+Iperf config.status 2.0.4
configured by $0, generated by GNU Autoconf 2.60,
with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
@@ -14894,6 +14879,7 @@
"doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"include/Makefile") CONFIG_FILES="$CONFIG_FILES include/Makefile" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+ "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
*) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
diff --git a/configure.ac b/configure.ac
index be4e660..4a92ead 100644
--- a/configure.ac
+++ b/configure.ac
@@ -5,7 +5,7 @@
AC_PREREQ(2.59)
-AC_INIT(Iperf,2.0.2)
+AC_INIT(Iperf,2.0.4)
AC_CONFIG_HEADER([config.h])
AM_INIT_AUTOMAKE()
@@ -263,5 +263,6 @@
compat/Makefile
doc/Makefile
include/Makefile
- src/Makefile])
+ src/Makefile
+ man/Makefile])
AC_OUTPUT
diff --git a/include/version.h b/include/version.h
index 8e4744b..21c4d2a 100644
--- a/include/version.h
+++ b/include/version.h
@@ -1,2 +1,2 @@
#define IPERF_VERSION "2.0.4"
-#define IPERF_VERSION_DATE "4 Apr 2008"
+#define IPERF_VERSION_DATE "7 Apr 2008"
diff --git a/man/Makefile.am b/man/Makefile.am
new file mode 100644
index 0000000..ed97bc6
--- /dev/null
+++ b/man/Makefile.am
@@ -0,0 +1,2 @@
+man_MANS = iperf.1
+dist_man_MANS = $(man_MANS)
diff --git a/man/Makefile.in b/man/Makefile.in
new file mode 100644
index 0000000..12b3779
--- /dev/null
+++ b/man/Makefile.in
@@ -0,0 +1,364 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = man
+DIST_COMMON = $(dist_man_MANS) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
+ $(top_srcdir)/m4/ax_create_stdint_h.m4 \
+ $(top_srcdir)/m4/dast.m4 $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+man1dir = $(mandir)/man1
+am__installdirs = "$(DESTDIR)$(man1dir)"
+NROFF = nroff
+MANS = $(dist_man_MANS) $(man_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PTHREAD_CC = @PTHREAD_CC@
+PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
+PTHREAD_LIBS = @PTHREAD_LIBS@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+STRIP_BEGIN = @STRIP_BEGIN@
+STRIP_DUMMY = @STRIP_DUMMY@
+STRIP_END = @STRIP_END@
+VERSION = @VERSION@
+WEB100_CFLAGS = @WEB100_CFLAGS@
+WEB100_CONFIG = @WEB100_CONFIG@
+WEB100_LIBS = @WEB100_LIBS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+acx_pthread_config = @acx_pthread_config@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+man_MANS = iperf.1
+dist_man_MANS = $(man_MANS)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign man/Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --foreign man/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+uninstall-info-am:
+install-man1: $(man1_MANS) $(man_MANS)
+ @$(NORMAL_INSTALL)
+ test -z "$(man1dir)" || $(mkdir_p) "$(DESTDIR)$(man1dir)"
+ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+ else file=$$i; fi; \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
+ done
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
+ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+ for i in $$l2; do \
+ case "$$i" in \
+ *.1*) list="$$list $$i" ;; \
+ esac; \
+ done; \
+ for i in $$list; do \
+ ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+ case "$$ext" in \
+ 1*) ;; \
+ *) ext='1' ;; \
+ esac; \
+ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+ inst=`echo $$inst | sed -e 's/^.*\///'`; \
+ inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+ echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
+ rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
+ done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+ for dir in "$(DESTDIR)$(man1dir)"; do \
+ test -z "$$dir" || $(mkdir_p) "$$dir"; \
+ done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man: install-man1
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-info-am uninstall-man
+
+uninstall-man: uninstall-man1
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+ distclean-generic distdir dvi dvi-am html html-am info info-am \
+ install install-am install-data install-data-am install-exec \
+ install-exec-am install-info install-info-am install-man \
+ install-man1 install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+ uninstall-am uninstall-info-am uninstall-man uninstall-man1
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
