| ##### hostapd configuration file ############################################## |
| # Empty lines and lines starting with # are ignored |
| |
| # Example configuration file for wired authenticator. See hostapd.conf for |
| # more details. |
| |
| interface=eth0 |
| driver=wired |
| logger_stdout=-1 |
| logger_stdout_level=1 |
| debug=2 |
| dump_file=/tmp/hostapd.dump |
| |
| ieee8021x=1 |
| eap_reauth_period=3600 |
| |
| use_pae_group_addr=1 |
| |
| |
| ##### RADIUS configuration #################################################### |
| # for IEEE 802.1X with external Authentication Server, IEEE 802.11 |
| # authentication with external ACL for MAC addresses, and accounting |
| |
| # The own IP address of the access point (used as NAS-IP-Address) |
| own_ip_addr=127.0.0.1 |
| |
| # Optional NAS-Identifier string for RADIUS messages. When used, this should be |
| # a unique to the NAS within the scope of the RADIUS server. For example, a |
| # fully qualified domain name can be used here. |
| nas_identifier=ap.example.com |
| |
| # RADIUS authentication server |
| auth_server_addr=127.0.0.1 |
| auth_server_port=1812 |
| auth_server_shared_secret=radius |
| |
| # RADIUS accounting server |
| acct_server_addr=127.0.0.1 |
| acct_server_port=1813 |
| acct_server_shared_secret=radius |
