| # IBSS test cases |
| # Copyright (c) 2013, Jouni Malinen <j@w1.fi> |
| # |
| # This software may be distributed under the terms of the BSD license. |
| # See README for more details. |
| |
| import logging |
| logger = logging.getLogger() |
| import time |
| import re |
| |
| import hwsim_utils |
| |
| def connect_ibss_cmd(dev, id): |
| dev.dump_monitor() |
| dev.select_network(id, freq="2412") |
| |
| def wait_ibss_connection(dev): |
| logger.info(dev.ifname + " waiting for IBSS start/join to complete") |
| ev = dev.wait_event(["CTRL-EVENT-CONNECTED"], timeout=20) |
| if ev is None: |
| raise Exception("Connection to the IBSS timed out") |
| exp = r'<.>(CTRL-EVENT-CONNECTED) - Connection to ([0-9a-f:]*) completed.*' |
| s = re.split(exp, ev) |
| if len(s) < 3: |
| return None |
| return s[2] |
| |
| def wait_4way_handshake(dev1, dev2): |
| logger.info(dev1.ifname + " waiting for 4-way handshake completion with " + dev2.ifname + " " + dev2.p2p_interface_addr()) |
| ev = dev1.wait_event(["IBSS-RSN-COMPLETED " + dev2.p2p_interface_addr()], |
| timeout=20) |
| if ev is None: |
| raise Exception("4-way handshake in IBSS timed out") |
| |
| def wait_4way_handshake2(dev1, dev2, dev3): |
| logger.info(dev1.ifname + " waiting for 4-way handshake completion with " + dev2.ifname + " " + dev2.p2p_interface_addr() + " and " + dev3.p2p_interface_addr()) |
| ev = dev1.wait_event(["IBSS-RSN-COMPLETED " + dev2.p2p_interface_addr(), |
| "IBSS-RSN-COMPLETED " + dev3.p2p_interface_addr()], |
| timeout=20) |
| if ev is None: |
| raise Exception("4-way handshake in IBSS timed out") |
| ev = dev1.wait_event(["IBSS-RSN-COMPLETED " + dev2.p2p_interface_addr(), |
| "IBSS-RSN-COMPLETED " + dev3.p2p_interface_addr()], |
| timeout=20) |
| if ev is None: |
| raise Exception("4-way handshake in IBSS timed out") |
| |
| def add_ibss(dev, ssid, psk=None, proto=None, key_mgmt=None, pairwise=None, group=None, beacon_int=None, bssid=None): |
| id = dev.add_network() |
| dev.set_network(id, "mode", "1") |
| dev.set_network(id, "frequency", "2412") |
| dev.set_network_quoted(id, "ssid", ssid) |
| if psk: |
| dev.set_network_quoted(id, "psk", psk) |
| if proto: |
| dev.set_network(id, "proto", proto) |
| if key_mgmt: |
| dev.set_network(id, "key_mgmt", key_mgmt) |
| if pairwise: |
| dev.set_network(id, "pairwise", pairwise) |
| if group: |
| dev.set_network(id, "group", group) |
| if beacon_int: |
| dev.set_network(id, "beacon_int", beacon_int) |
| if bssid: |
| dev.set_network(id, "bssid", bssid) |
| dev.request("ENABLE_NETWORK " + str(id) + " no-connect") |
| return id |
| |
| def add_ibss_rsn(dev, ssid): |
| return add_ibss(dev, ssid, "12345678", "RSN", "WPA-PSK", "CCMP", "CCMP") |
| |
| def add_ibss_wpa_none(dev, ssid): |
| return add_ibss(dev, ssid, "12345678", "WPA", "WPA-NONE", "TKIP", "TKIP") |
| |
| def add_ibss_wpa_none_ccmp(dev, ssid): |
| return add_ibss(dev, ssid, "12345678", "WPA", "WPA-NONE", "CCMP", "CCMP") |
| |
| def test_ibss_rsn(dev): |
| """IBSS RSN""" |
| ssid="ibss-rsn" |
| |
| logger.info("Start IBSS on the first STA") |
| id = add_ibss_rsn(dev[0], ssid) |
| connect_ibss_cmd(dev[0], id) |
| bssid0 = wait_ibss_connection(dev[0]) |
| |
| logger.info("Join two STAs to the IBSS") |
| |
| id = add_ibss_rsn(dev[1], ssid) |
| connect_ibss_cmd(dev[1], id) |
| bssid1 = wait_ibss_connection(dev[1]) |
| if bssid0 != bssid1: |
| logger.info("STA0 BSSID " + bssid0 + " differs from STA1 BSSID " + bssid1) |
| # try to merge with a scan |
| dev[1].scan() |
| wait_4way_handshake(dev[0], dev[1]) |
| wait_4way_handshake(dev[1], dev[0]) |
| |
| id = add_ibss_rsn(dev[2], ssid) |
| connect_ibss_cmd(dev[2], id) |
| bssid2 = wait_ibss_connection(dev[2]) |
| if bssid0 != bssid2: |
| logger.info("STA0 BSSID " + bssid0 + " differs from STA2 BSSID " + bssid2) |
| # try to merge with a scan |
| dev[2].scan() |
| wait_4way_handshake(dev[0], dev[2]) |
| wait_4way_handshake2(dev[2], dev[0], dev[1]) |
| |
| # Allow some time for all peers to complete key setup |
| time.sleep(3) |
| hwsim_utils.test_connectivity(dev[0].ifname, dev[1].ifname) |
| hwsim_utils.test_connectivity(dev[0].ifname, dev[2].ifname) |
| hwsim_utils.test_connectivity(dev[1].ifname, dev[2].ifname) |
| |
| dev[1].request("REMOVE_NETWORK all") |
| time.sleep(1) |
| id = add_ibss_rsn(dev[1], ssid) |
| connect_ibss_cmd(dev[1], id) |
| bssid1 = wait_ibss_connection(dev[1]) |
| if bssid0 != bssid1: |
| logger.info("STA0 BSSID " + bssid0 + " differs from STA1 BSSID " + bssid1) |
| # try to merge with a scan |
| dev[1].scan() |
| wait_4way_handshake(dev[0], dev[1]) |
| wait_4way_handshake(dev[1], dev[0]) |
| time.sleep(3) |
| hwsim_utils.test_connectivity(dev[0].ifname, dev[1].ifname) |
| |
| def test_ibss_wpa_none(dev): |
| """IBSS WPA-None""" |
| ssid="ibss-wpa-none" |
| |
| logger.info("Start IBSS on the first STA") |
| id = add_ibss_wpa_none(dev[0], ssid) |
| connect_ibss_cmd(dev[0], id) |
| bssid0 = wait_ibss_connection(dev[0]) |
| |
| # This is a bit ugly, but no one really cares about WPA-None, so there may |
| # not be enough justification to clean this up.. For now, wpa_supplicant |
| # will show two connection events with mac80211_hwsim where the first one |
| # comes with all zeros address. |
| if bssid0 == "00:00:00:00:00:00": |
| logger.info("Waiting for real BSSID on the first STA") |
| bssid0 = wait_ibss_connection(dev[0]) |
| |
| logger.info("Join two STAs to the IBSS") |
| |
| id = add_ibss_wpa_none(dev[1], ssid) |
| connect_ibss_cmd(dev[1], id) |
| id = add_ibss_wpa_none(dev[2], ssid) |
| connect_ibss_cmd(dev[2], id) |
| |
| bssid1 = wait_ibss_connection(dev[1]) |
| if bssid0 != bssid1: |
| logger.info("STA0 BSSID " + bssid0 + " differs from STA1 BSSID " + bssid1) |
| bssid1 = wait_ibss_connection(dev[1]) |
| |
| bssid2 = wait_ibss_connection(dev[2]) |
| if bssid0 != bssid2: |
| logger.info("STA0 BSSID " + bssid0 + " differs from STA2 BSSID " + bssid2) |
| bssid2 = wait_ibss_connection(dev[2]) |
| |
| print bssid0 |
| print bssid1 |
| print bssid2 |
| |
| # Allow some time for all peers to complete key setup |
| time.sleep(1) |
| |
| # This is supposed to work, but looks like WPA-None does not work with |
| # mac80211 currently.. |
| try: |
| hwsim_utils.test_connectivity(dev[0].ifname, dev[1].ifname) |
| except Exception, e: |
| logger.info("Ignoring known connectivity failure: " + str(e)) |
| try: |
| hwsim_utils.test_connectivity(dev[0].ifname, dev[2].ifname) |
| except Exception, e: |
| logger.info("Ignoring known connectivity failure: " + str(e)) |
| try: |
| hwsim_utils.test_connectivity(dev[1].ifname, dev[2].ifname) |
| except Exception, e: |
| logger.info("Ignoring known connectivity failure: " + str(e)) |
| |
| def test_ibss_wpa_none_ccmp(dev): |
| """IBSS WPA-None/CCMP""" |
| ssid="ibss-wpa-none" |
| |
| logger.info("Start IBSS on the first STA") |
| id = add_ibss_wpa_none(dev[0], ssid) |
| connect_ibss_cmd(dev[0], id) |
| bssid0 = wait_ibss_connection(dev[0]) |
| |
| # This is a bit ugly, but no one really cares about WPA-None, so there may |
| # not be enough justification to clean this up.. For now, wpa_supplicant |
| # will show two connection events with mac80211_hwsim where the first one |
| # comes with all zeros address. |
| if bssid0 == "00:00:00:00:00:00": |
| logger.info("Waiting for real BSSID on the first STA") |
| bssid0 = wait_ibss_connection(dev[0]) |
| |
| |
| logger.info("Join a STA to the IBSS") |
| id = add_ibss_wpa_none(dev[1], ssid) |
| connect_ibss_cmd(dev[1], id) |
| |
| bssid1 = wait_ibss_connection(dev[1]) |
| if bssid0 != bssid1: |
| logger.info("STA0 BSSID " + bssid0 + " differs from STA1 BSSID " + bssid1) |
| bssid1 = wait_ibss_connection(dev[1]) |
| |
| print bssid0 |
| print bssid1 |
| |
| # Allow some time for all peers to complete key setup |
| time.sleep(1) |
| |
| # This is supposed to work, but looks like WPA-None does not work with |
| # mac80211 currently.. |
| try: |
| hwsim_utils.test_connectivity(dev[0].ifname, dev[1].ifname) |
| except Exception, e: |
| logger.info("Ignoring known connectivity failure: " + str(e)) |
| |
| def test_ibss_open(dev): |
| """IBSS open (no security)""" |
| ssid="ibss" |
| id = add_ibss(dev[0], ssid, key_mgmt="NONE", beacon_int="150") |
| connect_ibss_cmd(dev[0], id) |
| bssid0 = wait_ibss_connection(dev[0]) |
| |
| id = add_ibss(dev[1], ssid, key_mgmt="NONE", beacon_int="200") |
| connect_ibss_cmd(dev[1], id) |
| bssid1 = wait_ibss_connection(dev[1]) |
| if bssid0 != bssid1: |
| logger.info("STA0 BSSID " + bssid0 + " differs from STA1 BSSID " + bssid1) |
| |
| def test_ibss_open_fixed_bssid(dev): |
| """IBSS open (no security) and fixed BSSID""" |
| ssid="ibss" |
| bssid="02:11:22:33:44:55" |
| try: |
| dev[0].request("AP_SCAN 2") |
| add_ibss(dev[0], ssid, key_mgmt="NONE", bssid=bssid, beacon_int="150") |
| dev[0].request("REASSOCIATE") |
| |
| dev[1].request("AP_SCAN 2") |
| add_ibss(dev[1], ssid, key_mgmt="NONE", bssid=bssid, beacon_int="200") |
| dev[1].request("REASSOCIATE") |
| |
| bssid0 = wait_ibss_connection(dev[0]) |
| bssid1 = wait_ibss_connection(dev[1]) |
| if bssid0 != bssid: |
| raise Exception("STA0 BSSID " + bssid0 + " differs from fixed BSSID " + bssid) |
| if bssid1 != bssid: |
| raise Exception("STA0 BSSID " + bssid0 + " differs from fixed BSSID " + bssid) |
| finally: |
| dev[0].request("AP_SCAN 1") |
| dev[1].request("AP_SCAN 1") |
