| /* |
| * This file define a set of standard wireless extensions |
| * |
| * Version : 9 16.10.99 |
| * |
| * Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com> |
| */ |
| |
| #ifndef _LINUX_WIRELESS_H |
| #define _LINUX_WIRELESS_H |
| |
| /************************** DOCUMENTATION **************************/ |
| /* |
| * Basically, the wireless extensions are for now a set of standard ioctl |
| * call + /proc/net/wireless |
| * |
| * The entry /proc/net/wireless give statistics and information on the |
| * driver. |
| * This is better than having each driver having its entry because |
| * its centralised and we may remove the driver module safely. |
| * |
| * Ioctl are used to configure the driver and issue commands. This is |
| * better than command line options of insmod because we may want to |
| * change dynamically (while the driver is running) some parameters. |
| * |
| * The ioctl mechanimsm are copied from standard devices ioctl. |
| * We have the list of command plus a structure descibing the |
| * data exchanged... |
| * Note that to add these ioctl, I was obliged to modify : |
| * net/core/dev.c (two place + add include) |
| * net/ipv4/af_inet.c (one place + add include) |
| * |
| * /proc/net/wireless is a copy of /proc/net/dev. |
| * We have a structure for data passed from the driver to /proc/net/wireless |
| * Too add this, I've modified : |
| * net/core/dev.c (two other places) |
| * include/linux/netdevice.h (one place) |
| * include/linux/proc_fs.h (one place) |
| * |
| * Do not add here things that are redundant with other mechanisms |
| * (drivers init, ifconfig, /proc/net/dev, ...) and with are not |
| * wireless specific. |
| * |
| * These wireless extensions are not magic : each driver has to provide |
| * support for them... |
| * |
| * IMPORTANT NOTE : As everything in the kernel, this is very much a |
| * work in progress. Contact me if you have ideas of improvements... |
| */ |
| |
| /***************************** INCLUDES *****************************/ |
| |
| #include <linux/types.h> /* for "caddr_t" et al */ |
| #include <linux/socket.h> /* for "struct sockaddr" et al */ |
| #include <linux/if.h> /* for IFNAMSIZ and co... */ |
| |
| /**************************** CONSTANTS ****************************/ |
| |
| /* --------------------------- VERSION --------------------------- */ |
| /* |
| * This constant is used to know the availability of the wireless |
| * extensions and to know which version of wireless extensions it is |
| * (there is some stuff that will be added in the future...) |
| * I just plan to increment with each new version. |
| */ |
| #define WIRELESS_EXT 9 |
| |
| /* |
| * Changes : |
| * |
| * V2 to V3 |
| * -------- |
| * Alan Cox start some incompatibles changes. I've integrated a bit more. |
| * - Encryption renamed to Encode to avoid US regulation problems |
| * - Frequency changed from float to struct to avoid problems on old 386 |
| * |
| * V3 to V4 |
| * -------- |
| * - Add sensitivity |
| * |
| * V4 to V5 |
| * -------- |
| * - Missing encoding definitions in range |
| * - Access points stuff |
| * |
| * V5 to V6 |
| * -------- |
| * - 802.11 support (ESSID ioctls) |
| * |
| * V6 to V7 |
| * -------- |
| * - define IW_ESSID_MAX_SIZE and IW_MAX_AP |
| * |
| * V7 to V8 |
| * -------- |
| * - Changed my e-mail address |
| * - More 802.11 support (nickname, rate, rts, frag) |
| * - List index in frequencies |
| * |
| * V8 to V9 |
| * -------- |
| * - Support for 'mode of operation' (ad-hoc, managed...) |
| * - Support for unicast and multicast power saving |
| * - Change encoding to support larger tokens (>64 bits) |
| * - Updated iw_params (disable, flags) and use it for NWID |
| * - Extracted iw_point from iwreq for clarity |
| */ |
| |
| /* -------------------------- IOCTL LIST -------------------------- */ |
| |
| /* Basic operations */ |
| #define SIOCSIWNAME 0x8B00 /* Unused ??? */ |
| #define SIOCGIWNAME 0x8B01 /* get name */ |
| #define SIOCSIWNWID 0x8B02 /* set network id (the cell) */ |
| #define SIOCGIWNWID 0x8B03 /* get network id */ |
| #define SIOCSIWFREQ 0x8B04 /* set channel/frequency */ |
| #define SIOCGIWFREQ 0x8B05 /* get channel/frequency */ |
| #define SIOCSIWMODE 0x8B06 /* set operation mode */ |
| #define SIOCGIWMODE 0x8B07 /* get operation mode */ |
| #define SIOCSIWSENS 0x8B08 /* set sensitivity */ |
| #define SIOCGIWSENS 0x8B09 /* get sensitivity */ |
| |
| /* Informative stuff */ |
| #define SIOCSIWRANGE 0x8B0A /* Unused ??? */ |
| #define SIOCGIWRANGE 0x8B0B /* Get range of parameters */ |
| #define SIOCSIWPRIV 0x8B0C /* Unused ??? */ |
| #define SIOCGIWPRIV 0x8B0D /* get private ioctl interface info */ |
| |
| /* Mobile IP support */ |
| #define SIOCSIWSPY 0x8B10 /* set spy addresses */ |
| #define SIOCGIWSPY 0x8B11 /* get spy info (quality of link) */ |
| |
| /* Access Point manipulation */ |
| #define SIOCSIWAP 0x8B14 /* set access point MAC addresses */ |
| #define SIOCGIWAP 0x8B15 /* get access point MAC addresses */ |
| #define SIOCGIWAPLIST 0x8B17 /* get list of access point in range */ |
| |
| /* 802.11 specific support */ |
| #define SIOCSIWESSID 0x8B1A /* set ESSID (network name) */ |
| #define SIOCGIWESSID 0x8B1B /* get ESSID */ |
| #define SIOCSIWNICKN 0x8B1C /* set node name/nickname */ |
| #define SIOCGIWNICKN 0x8B1D /* get node name/nickname */ |
| /* As the ESSID and NICKN are strings up to 32 bytes long, it doesn't fit |
| * within the 'iwreq' structure, so we need to use the 'data' member to |
| * point to a string in user space, like it is done for RANGE... |
| * The "flags" member indicate if the ESSID is active or not (promiscuous). |
| */ |
| |
| /* Other parameters usefull in 802.11 and some other devices */ |
| #define SIOCSIWRATE 0x8B20 /* set default bit rate (bps) */ |
| #define SIOCGIWRATE 0x8B21 /* get default bit rate (bps) */ |
| #define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */ |
| #define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */ |
| #define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */ |
| #define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) */ |
| |
| /* Encoding stuff (scrambling, hardware security, WEP...) */ |
| #define SIOCSIWENCODE 0x8B2A /* set encoding token & mode */ |
| #define SIOCGIWENCODE 0x8B2B /* get encoding token & mode */ |
| /* Power saving stuff (power management, unicast and multicast) */ |
| #define SIOCSIWPOWER 0x8B2C /* set Power Management settings */ |
| #define SIOCGIWPOWER 0x8B2D /* get Power Management settings */ |
| |
| /* ------------------------- IOCTL STUFF ------------------------- */ |
| |
| /* The first and the last (range) */ |
| #define SIOCIWFIRST 0x8B00 |
| #define SIOCIWLAST 0x8B30 |
| |
| /* Even : get (world access), odd : set (root access) */ |
| #define IW_IS_SET(cmd) (!((cmd) & 0x1)) |
| #define IW_IS_GET(cmd) ((cmd) & 0x1) |
| |
| /* ------------------------- PRIVATE INFO ------------------------- */ |
| /* |
| * The following is used with SIOCGIWPRIV. It allow a driver to define |
| * the interface (name, type of data) for its private ioctl. |
| * Privates ioctl are SIOCDEVPRIVATE -> SIOCDEVPRIVATE + 0xF |
| */ |
| |
| #define IW_PRIV_TYPE_MASK 0x7000 /* Type of arguments */ |
| #define IW_PRIV_TYPE_NONE 0x0000 |
| #define IW_PRIV_TYPE_BYTE 0x1000 /* Char as number */ |
| #define IW_PRIV_TYPE_CHAR 0x2000 /* Char as character */ |
| #define IW_PRIV_TYPE_INT 0x4000 /* 32 bits int */ |
| #define IW_PRIV_TYPE_FLOAT 0x5000 |
| |
| #define IW_PRIV_SIZE_FIXED 0x0800 /* Variable or fixed nuber of args */ |
| |
| #define IW_PRIV_SIZE_MASK 0x07FF /* Max number of those args */ |
| |
| /* |
| * Note : if the number of args is fixed and the size < 16 octets, |
| * instead of passing a pointer we will put args in the iwreq struct... |
| */ |
| |
| /* ----------------------- OTHER CONSTANTS ----------------------- */ |
| |
| /* Maximum frequencies in the range struct */ |
| #define IW_MAX_FREQUENCIES 16 |
| /* Note : if you have something like 80 frequencies, |
| * don't increase this constant and don't fill the frequency list. |
| * The user will be able to set by channel anyway... */ |
| |
| /* Maximum bit rates in the range struct */ |
| #define IW_MAX_BITRATES 8 |
| |
| /* Maximum of address that you may set with SPY */ |
| #define IW_MAX_SPY 8 |
| |
| /* Maximum of address that you may get in the |
| list of access points in range */ |
| #define IW_MAX_AP 8 |
| |
| /* Maximum size of the ESSID and NICKN strings */ |
| #define IW_ESSID_MAX_SIZE 32 |
| |
| /* Modes of operation */ |
| #define IW_MODE_AUTO 0 /* Let the driver decides */ |
| #define IW_MODE_ADHOC 1 /* Single cell network */ |
| #define IW_MODE_INFRA 2 /* Multi cell network, roaming, ... */ |
| #define IW_MODE_MASTER 3 /* Synchronisation master or Access Point */ |
| #define IW_MODE_REPEAT 4 /* Wireless Repeater (forwarder) */ |
| #define IW_MODE_SECOND 5 /* Secondary master/repeater (backup) */ |
| |
| /* Maximum number of size of encoding token available |
| * they are listed in the range structure */ |
| #define IW_MAX_ENCODING_SIZES 8 |
| |
| /* Maximum size of the encoding token in bytes */ |
| #define IW_ENCODING_TOKEN_MAX 32 /* 256 bits (for now) */ |
| |
| /* Flags for encoding (along with the token) */ |
| #define IW_ENCODE_INDEX 0x00FF /* Token index (if needed) */ |
| #define IW_ENCODE_FLAGS 0xF000 /* Flags defined below */ |
| #define IW_ENCODE_DISABLED 0x8000 /* Encoding disabled */ |
| #define IW_ENCODE_ENABLED 0x0000 /* Encoding enabled */ |
| #define IW_ENCODE_RESTRICTED 0x4000 /* Refuse non-encoded packets */ |
| #define IW_ENCODE_OPEN 0x2000 /* Accept non-encoded packets */ |
| |
| /* Power management flags available (along with the value, if any) */ |
| #define IW_POWER_ON 0x0000 /* No details... */ |
| #define IW_POWER_TYPE 0xF000 /* Type of parameter */ |
| #define IW_POWER_PERIOD 0x1000 /* Value is a period/duration of */ |
| #define IW_POWER_TIMEOUT 0x2000 /* Value is a timeout (to go asleep) */ |
| #define IW_POWER_MODE 0x0F00 /* Power Management mode */ |
| #define IW_POWER_UNICAST_R 0x0100 /* Receive only unicast messages */ |
| #define IW_POWER_MULTICAST_R 0x0200 /* Receive only multicast messages */ |
| #define IW_POWER_ALL_R 0x0300 /* Receive all messages though PM */ |
| #define IW_POWER_FORCE_S 0x0400 /* Force PM procedure for sending unicast */ |
| #define IW_POWER_REPEATER 0x0800 /* Repeat broadcast messages in PM period */ |
| |
| /****************************** TYPES ******************************/ |
| |
| /* --------------------------- SUBTYPES --------------------------- */ |
| /* |
| * Generic format for most parameters that fit in an int |
| */ |
| struct iw_param |
| { |
| __s32 value; /* The value of the parameter itself */ |
| __u8 fixed; /* Hardware should not use auto select */ |
| __u8 disabled; /* Disable the feature */ |
| __u16 flags; /* Various specifc flags (if any) */ |
| }; |
| |
| /* |
| * For all data larger than 16 octets, we need to use a |
| * pointer to memory alocated in user space. |
| */ |
| struct iw_point |
| { |
| caddr_t pointer; /* Pointer to the data (in user space) */ |
| __u16 length; /* number of fields or size in bytes */ |
| __u16 flags; /* Optional params */ |
| }; |
| |
| /* |
| * A frequency |
| * For numbers lower than 10^9, we encode the number in 'm' and |
| * set 'e' to 0 |
| * For number greater than 10^9, we divide it by the lowest power |
| * of 10 to get 'm' lower than 10^9, with 'm'= f / (10^'e')... |
| * The power of 10 is in 'e', the result of the division is in 'm'. |
| */ |
| struct iw_freq |
| { |
| __u32 m; /* Mantissa */ |
| __u16 e; /* Exponent */ |
| __u8 i; /* List index (when in range struct) */ |
| }; |
| |
| /* |
| * Quality of the link |
| */ |
| struct iw_quality |
| { |
| __u8 qual; /* link quality (%retries, SNR or better...) */ |
| __u8 level; /* signal level */ |
| __u8 noise; /* noise level */ |
| __u8 updated; /* Flags to know if updated */ |
| }; |
| |
| /* |
| * Packet discarded in the wireless adapter due to |
| * "wireless" specific problems... |
| */ |
| struct iw_discarded |
| { |
| __u32 nwid; /* Wrong nwid */ |
| __u32 code; /* Unable to code/decode */ |
| __u32 misc; /* Others cases */ |
| }; |
| |
| /* ------------------------ WIRELESS STATS ------------------------ */ |
| /* |
| * Wireless statistics (used for /proc/net/wireless) |
| */ |
| struct iw_statistics |
| { |
| __u16 status; /* Status |
| * - device dependent for now */ |
| |
| struct iw_quality qual; /* Quality of the link |
| * (instant/mean/max) */ |
| struct iw_discarded discard; /* Packet discarded counts */ |
| }; |
| |
| /* ------------------------ IOCTL REQUEST ------------------------ */ |
| /* |
| * The structure to exchange data for ioctl. |
| * This structure is the same as 'struct ifreq', but (re)defined for |
| * convenience... |
| * |
| * Note that it should fit on the same memory footprint ! |
| * You should check this when increasing the above structures (16 octets) |
| * 16 octets = 128 bits. Warning, pointers might be 64 bits wide... |
| */ |
| struct iwreq |
| { |
| union |
| { |
| char ifrn_name[IFNAMSIZ]; /* if name, e.g. "eth0" */ |
| } ifr_ifrn; |
| |
| /* Data part */ |
| union |
| { |
| /* Config - generic */ |
| char name[IFNAMSIZ]; |
| /* Name : used to verify the presence of wireless extensions. |
| * Name of the protocol/provider... */ |
| |
| struct iw_point essid; /* Extended network name */ |
| struct iw_param nwid; /* network id (or domain - the cell) */ |
| struct iw_freq freq; /* frequency or channel : |
| * 0-1000 = channel |
| * > 1000 = frequency in Hz */ |
| |
| struct iw_param sens; /* signal level threshold */ |
| struct iw_param bitrate; /* default bit rate */ |
| struct iw_param rts; /* RTS threshold threshold */ |
| struct iw_param frag; /* Fragmentation threshold */ |
| __u32 mode; /* Operation mode */ |
| |
| struct iw_point encoding; /* Encoding stuff : tokens */ |
| struct iw_param power; /* PM duration/timeout */ |
| |
| struct sockaddr ap_addr; /* Access point address */ |
| |
| struct iw_point data; /* Other large parameters */ |
| } u; |
| }; |
| |
| /* -------------------------- IOCTL DATA -------------------------- */ |
| /* |
| * For those ioctl which want to exchange mode data that what could |
| * fit in the above structure... |
| */ |
| |
| /* |
| * Range of parameters |
| */ |
| |
| struct iw_range |
| { |
| /* Informative stuff (to choose between different interface) */ |
| __u32 throughput; /* To give an idea... */ |
| /* In theory this value should be the maximum benchmarked |
| * TCP/IP throughput, because with most of these devices the |
| * bit rate is meaningless (overhead an co) to estimate how |
| * fast the connection will go and pick the fastest one. |
| * I suggest people to play with Netperf or any benchmark... |
| */ |
| |
| /* NWID (or domain id) */ |
| __u32 min_nwid; /* Minimal NWID we are able to set */ |
| __u32 max_nwid; /* Maximal NWID we are able to set */ |
| |
| /* Frequency */ |
| __u16 num_channels; /* Number of channels [0; num - 1] */ |
| __u8 num_frequency; /* Number of entry in the list */ |
| struct iw_freq freq[IW_MAX_FREQUENCIES]; /* list */ |
| /* Note : this frequency list doesn't need to fit channel numbers */ |
| |
| /* signal level threshold range */ |
| __s32 sensitivity; |
| |
| /* Quality of link & SNR stuff */ |
| struct iw_quality max_qual; /* Quality of the link */ |
| |
| /* Rates */ |
| __u8 num_bitrates; /* Number of entries in the list */ |
| __s32 bitrate[IW_MAX_BITRATES]; /* list, in bps */ |
| |
| /* RTS threshold */ |
| __s32 min_rts; /* Minimal RTS threshold */ |
| __s32 max_rts; /* Maximal RTS threshold */ |
| |
| /* Frag threshold */ |
| __s32 min_frag; /* Minimal frag threshold */ |
| __s32 max_frag; /* Maximal frag threshold */ |
| |
| /* Power Management duration & timeout */ |
| __s32 min_pmd; /* Minimal PM duration */ |
| __s32 max_pmd; /* Maximal PM duration */ |
| __s32 min_pmt; /* Minimal PM timeout */ |
| __s32 max_pmt; /* Maximal PM timeout */ |
| |
| /* Encoder stuff */ |
| __u16 encoding_size[IW_MAX_ENCODING_SIZES]; /* Different token sizes */ |
| __u8 num_encoding_sizes; /* Number of entry in the list */ |
| __u8 max_encoding_tokens; /* Max number of tokens */ |
| }; |
| |
| /* |
| * Private ioctl interface information |
| */ |
| |
| struct iw_priv_args |
| { |
| __u32 cmd; /* Number of the ioctl to issue */ |
| __u16 set_args; /* Type and number of args */ |
| __u16 get_args; /* Type and number of args */ |
| char name[IFNAMSIZ]; /* Name of the extension */ |
| }; |
| |
| #endif /* _LINUX_WIRELESS_H */ |