| #!/usr/bin/python |
| # |
| # WPS tests |
| # Copyright (c) 2013, Jouni Malinen <j@w1.fi> |
| # |
| # This software may be distributed under the terms of the BSD license. |
| # See README for more details. |
| |
| import time |
| import subprocess |
| import logging |
| logger = logging.getLogger() |
| |
| import hwsim_utils |
| import hostapd |
| |
| def test_ap_wps_init(dev, apdev): |
| """Initial AP configuration with first WPS Enrollee""" |
| ssid = "test-wps" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": ssid, "eap_server": "1", "wps_state": "1" }) |
| hapd = hostapd.Hostapd(apdev[0]['ifname']) |
| logger.info("WPS provisioning step") |
| hapd.request("WPS_PBC") |
| dev[0].request("SET ignore_old_scan_res 1") |
| dev[0].dump_monitor() |
| dev[0].request("WPS_PBC") |
| ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30) |
| if ev is None: |
| raise Exception("Association with the AP timed out") |
| status = dev[0].get_status() |
| if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']: |
| raise Exception("Not fully connected") |
| if status['ssid'] != ssid: |
| raise Exception("Unexpected SSID") |
| if status['pairwise_cipher'] != 'CCMP': |
| raise Exception("Unexpected encryption configuration") |
| if status['key_mgmt'] != 'WPA2-PSK': |
| raise Exception("Unexpected key_mgmt") |
| |
| def test_ap_wps_conf(dev, apdev): |
| """WPS PBC provisioning with configured AP""" |
| ssid = "test-wps-conf" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": ssid, "eap_server": "1", "wps_state": "2", |
| "wpa_passphrase": "12345678", "wpa": "2", |
| "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}) |
| hapd = hostapd.Hostapd(apdev[0]['ifname']) |
| logger.info("WPS provisioning step") |
| hapd.request("WPS_PBC") |
| dev[0].dump_monitor() |
| dev[0].request("WPS_PBC") |
| ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30) |
| if ev is None: |
| raise Exception("Association with the AP timed out") |
| status = dev[0].get_status() |
| if status['wpa_state'] != 'COMPLETED': |
| raise Exception("Not fully connected") |
| if status['bssid'] != apdev[0]['bssid']: |
| raise Exception("Unexpected BSSID") |
| if status['ssid'] != ssid: |
| raise Exception("Unexpected SSID") |
| if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP': |
| raise Exception("Unexpected encryption configuration") |
| if status['key_mgmt'] != 'WPA2-PSK': |
| raise Exception("Unexpected key_mgmt") |
| |
| def test_ap_wps_conf_pin(dev, apdev): |
| """WPS PIN provisioning with configured AP""" |
| ssid = "test-wps-conf-pin" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": ssid, "eap_server": "1", "wps_state": "2", |
| "wpa_passphrase": "12345678", "wpa": "2", |
| "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}) |
| hapd = hostapd.Hostapd(apdev[0]['ifname']) |
| logger.info("WPS provisioning step") |
| pin = dev[0].wps_read_pin() |
| hapd.request("WPS_PIN any " + pin) |
| dev[0].request("SET ignore_old_scan_res 1") |
| dev[0].dump_monitor() |
| dev[0].request("WPS_PIN any " + pin) |
| ev = dev[0].wait_event(["CTRL-EVENT-CONNECTED"], timeout=30) |
| if ev is None: |
| raise Exception("Association with the AP timed out") |
| status = dev[0].get_status() |
| if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']: |
| raise Exception("Not fully connected") |
| if status['ssid'] != ssid: |
| raise Exception("Unexpected SSID") |
| if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP': |
| raise Exception("Unexpected encryption configuration") |
| if status['key_mgmt'] != 'WPA2-PSK': |
| raise Exception("Unexpected key_mgmt") |
| |
| def test_ap_wps_reg_connect(dev, apdev): |
| """WPS registrar using AP PIN to connect""" |
| ssid = "test-wps-reg-ap-pin" |
| appin = "12345670" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": ssid, "eap_server": "1", "wps_state": "2", |
| "wpa_passphrase": "12345678", "wpa": "2", |
| "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP", |
| "ap_pin": appin}) |
| logger.info("WPS provisioning step") |
| dev[0].request("SET ignore_old_scan_res 1") |
| dev[0].dump_monitor() |
| dev[0].wps_reg(apdev[0]['bssid'], appin) |
| status = dev[0].get_status() |
| if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']: |
| raise Exception("Not fully connected") |
| if status['ssid'] != ssid: |
| raise Exception("Unexpected SSID") |
| if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP': |
| raise Exception("Unexpected encryption configuration") |
| if status['key_mgmt'] != 'WPA2-PSK': |
| raise Exception("Unexpected key_mgmt") |
| |
| def test_ap_wps_reg_config(dev, apdev): |
| """WPS registrar configuring and AP using AP PIN""" |
| ssid = "test-wps-init-ap-pin" |
| appin = "12345670" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": ssid, "eap_server": "1", "wps_state": "2", |
| "ap_pin": appin}) |
| logger.info("WPS configuration step") |
| dev[0].request("SET ignore_old_scan_res 1") |
| dev[0].dump_monitor() |
| new_ssid = "wps-new-ssid" |
| new_passphrase = "1234567890" |
| dev[0].wps_reg(apdev[0]['bssid'], appin, new_ssid, "WPA2PSK", "CCMP", |
| new_passphrase) |
| status = dev[0].get_status() |
| if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']: |
| raise Exception("Not fully connected") |
| if status['ssid'] != new_ssid: |
| raise Exception("Unexpected SSID") |
| if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP': |
| raise Exception("Unexpected encryption configuration") |
| if status['key_mgmt'] != 'WPA2-PSK': |
| raise Exception("Unexpected key_mgmt") |
| |
| def test_ap_wps_pbc_overlap_2ap(dev, apdev): |
| """WPS PBC session overlap with two active APs""" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": "wps1", "eap_server": "1", "wps_state": "2", |
| "wpa_passphrase": "12345678", "wpa": "2", |
| "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP", |
| "wps_independent": "1"}) |
| hostapd.add_ap(apdev[1]['ifname'], |
| { "ssid": "wps2", "eap_server": "1", "wps_state": "2", |
| "wpa_passphrase": "123456789", "wpa": "2", |
| "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP", |
| "wps_independent": "1"}) |
| hapd = hostapd.Hostapd(apdev[0]['ifname']) |
| hapd.request("WPS_PBC") |
| hapd2 = hostapd.Hostapd(apdev[1]['ifname']) |
| hapd2.request("WPS_PBC") |
| logger.info("WPS provisioning step") |
| dev[0].dump_monitor() |
| dev[0].request("WPS_PBC") |
| ev = dev[0].wait_event(["WPS-OVERLAP-DETECTED"], timeout=15) |
| if ev is None: |
| raise Exception("PBC session overlap not detected") |
| |
| def test_ap_wps_pbc_overlap_2sta(dev, apdev): |
| """WPS PBC session overlap with two active STAs""" |
| ssid = "test-wps-pbc-overlap" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": ssid, "eap_server": "1", "wps_state": "2", |
| "wpa_passphrase": "12345678", "wpa": "2", |
| "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP"}) |
| hapd = hostapd.Hostapd(apdev[0]['ifname']) |
| logger.info("WPS provisioning step") |
| hapd.request("WPS_PBC") |
| dev[0].request("SET ignore_old_scan_res 1") |
| dev[1].request("SET ignore_old_scan_res 1") |
| dev[0].dump_monitor() |
| dev[1].dump_monitor() |
| dev[0].request("WPS_PBC") |
| dev[1].request("WPS_PBC") |
| ev = dev[0].wait_event(["WPS-M2D"], timeout=15) |
| if ev is None: |
| raise Exception("PBC session overlap not detected (dev0)") |
| if "config_error=12" not in ev: |
| raise Exception("PBC session overlap not correctly reported (dev0)") |
| ev = dev[1].wait_event(["WPS-M2D"], timeout=15) |
| if ev is None: |
| raise Exception("PBC session overlap not detected (dev1)") |
| if "config_error=12" not in ev: |
| raise Exception("PBC session overlap not correctly reported (dev1)") |
| |
| def test_ap_wps_er_add_enrollee(dev, apdev): |
| """WPS ER configuring AP and adding a new enrollee using PIN""" |
| ssid = "wps-er-add-enrollee" |
| ap_pin = "12345670" |
| ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": ssid, "eap_server": "1", "wps_state": "1", |
| "device_name": "Wireless AP", "manufacturer": "Company", |
| "model_name": "WAP", "model_number": "123", |
| "serial_number": "12345", "device_type": "6-0050F204-1", |
| "os_version": "01020300", |
| "config_methods": "label push_button", |
| "ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}) |
| logger.info("WPS configuration step") |
| new_passphrase = "1234567890" |
| dev[0].dump_monitor() |
| dev[0].request("SET ignore_old_scan_res 1") |
| dev[0].wps_reg(apdev[0]['bssid'], ap_pin, ssid, "WPA2PSK", "CCMP", |
| new_passphrase) |
| status = dev[0].get_status() |
| if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']: |
| raise Exception("Not fully connected") |
| if status['ssid'] != ssid: |
| raise Exception("Unexpected SSID") |
| if status['pairwise_cipher'] != 'CCMP' or status['group_cipher'] != 'CCMP': |
| raise Exception("Unexpected encryption configuration") |
| if status['key_mgmt'] != 'WPA2-PSK': |
| raise Exception("Unexpected key_mgmt") |
| |
| logger.info("Start ER") |
| dev[0].request("WPS_ER_START ifname=lo") |
| ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15) |
| if ev is None: |
| raise Exception("AP discovery timed out") |
| if ap_uuid not in ev: |
| raise Exception("Expected AP UUID not found") |
| |
| logger.info("Learn AP configuration through UPnP") |
| dev[0].dump_monitor() |
| dev[0].request("WPS_ER_LEARN " + ap_uuid + " " + ap_pin) |
| ev = dev[0].wait_event(["WPS-ER-AP-SETTINGS"], timeout=15) |
| if ev is None: |
| raise Exception("AP learn timed out") |
| if ap_uuid not in ev: |
| raise Exception("Expected AP UUID not in settings") |
| if "ssid=" + ssid not in ev: |
| raise Exception("Expected SSID not in settings") |
| if "key=" + new_passphrase not in ev: |
| raise Exception("Expected passphrase not in settings") |
| |
| logger.info("Add Enrollee using ER") |
| pin = dev[1].wps_read_pin() |
| dev[0].dump_monitor() |
| dev[0].request("WPS_ER_PIN any " + pin + " " + dev[1].p2p_interface_addr()) |
| dev[1].request("SET ignore_old_scan_res 1") |
| dev[1].dump_monitor() |
| dev[1].request("WPS_PIN any " + pin) |
| ev = dev[1].wait_event(["WPS-SUCCESS"], timeout=30) |
| if ev is None: |
| raise Exception("Enrollee did not report success") |
| ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"], timeout=15) |
| if ev is None: |
| raise Exception("Association with the AP timed out") |
| ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15) |
| if ev is None: |
| raise Exception("WPS ER did not report success") |
| hwsim_utils.test_connectivity_sta(dev[0], dev[1]) |
| |
| def test_ap_wps_er_add_enrollee_pbc(dev, apdev): |
| """WPS ER connected to AP and adding a new enrollee using PBC""" |
| ssid = "wps-er-add-enrollee-pbc" |
| ap_pin = "12345670" |
| ap_uuid = "27ea801a-9e5c-4e73-bd82-f89cbcd10d7e" |
| hostapd.add_ap(apdev[0]['ifname'], |
| { "ssid": ssid, "eap_server": "1", "wps_state": "2", |
| "wpa_passphrase": "12345678", "wpa": "2", |
| "wpa_key_mgmt": "WPA-PSK", "rsn_pairwise": "CCMP", |
| "device_name": "Wireless AP", "manufacturer": "Company", |
| "model_name": "WAP", "model_number": "123", |
| "serial_number": "12345", "device_type": "6-0050F204-1", |
| "os_version": "01020300", |
| "config_methods": "label push_button", |
| "ap_pin": ap_pin, "uuid": ap_uuid, "upnp_iface": "lo"}) |
| logger.info("Learn AP configuration") |
| dev[0].dump_monitor() |
| dev[0].request("SET ignore_old_scan_res 1") |
| dev[0].wps_reg(apdev[0]['bssid'], ap_pin) |
| status = dev[0].get_status() |
| if status['wpa_state'] != 'COMPLETED' or status['bssid'] != apdev[0]['bssid']: |
| raise Exception("Not fully connected") |
| |
| logger.info("Start ER") |
| dev[0].request("WPS_ER_START ifname=lo") |
| ev = dev[0].wait_event(["WPS-ER-AP-ADD"], timeout=15) |
| if ev is None: |
| raise Exception("AP discovery timed out") |
| if ap_uuid not in ev: |
| raise Exception("Expected AP UUID not found") |
| |
| logger.info("Use learned network configuration on ER") |
| dev[0].request("WPS_ER_SET_CONFIG " + ap_uuid + " 0") |
| |
| logger.info("Add Enrollee using ER and PBC") |
| dev[0].dump_monitor() |
| enrollee = dev[1].p2p_interface_addr() |
| dev[1].request("SET ignore_old_scan_res 1") |
| dev[1].dump_monitor() |
| dev[1].request("WPS_PBC") |
| |
| ev = dev[0].wait_event(["WPS-ER-ENROLLEE-ADD"], timeout=15) |
| if ev is None: |
| raise Exception("Enrollee discovery timed out") |
| if enrollee not in ev: |
| raise Exception("Expected Enrollee not found") |
| dev[0].request("WPS_ER_PBC " + enrollee) |
| |
| ev = dev[1].wait_event(["WPS-SUCCESS"], timeout=15) |
| if ev is None: |
| raise Exception("Enrollee did not report success") |
| ev = dev[1].wait_event(["CTRL-EVENT-CONNECTED"], timeout=15) |
| if ev is None: |
| raise Exception("Association with the AP timed out") |
| ev = dev[0].wait_event(["WPS-SUCCESS"], timeout=15) |
| if ev is None: |
| raise Exception("WPS ER did not report success") |
| hwsim_utils.test_connectivity_sta(dev[0], dev[1]) |
