tests: Dualband AP rejecting authentication from dualband STA on 2.4 GHz
Signed-off-by: Jouni Malinen <j@w1.fi>
diff --git a/tests/hwsim/test_ap_track.py b/tests/hwsim/test_ap_track.py
index c39dcfd..a12c1c6 100644
--- a/tests/hwsim/test_ap_track.py
+++ b/tests/hwsim/test_ap_track.py
@@ -112,3 +112,117 @@
if dev[0].get_bss(bssid):
raise Exception("2.4 GHz AP found unexpectedly")
+
+def test_ap_track_sta_no_auth(dev, apdev):
+ """Dualband AP rejecting authentication from dualband STA on 2.4 GHz"""
+ try:
+ _test_ap_track_sta_no_auth(dev, apdev)
+ finally:
+ subprocess.call(['iw', 'reg', 'set', '00'])
+
+def _test_ap_track_sta_no_auth(dev, apdev):
+ params = { "ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "track_sta_max_num": "100",
+ "no_auth_if_seen_on": apdev[1]['ifname'] }
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ bssid = apdev[0]['bssid']
+
+ params = { "ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "track_sta_max_num": "100" }
+ hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
+ bssid2 = apdev[1]['bssid']
+
+ dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
+ dev[0].scan_for_bss(bssid2, freq=5200, force_scan=True)
+ dev[1].scan_for_bss(bssid, freq=2437, force_scan=True)
+
+ dev[1].connect("track", key_mgmt="NONE", scan_freq="2437")
+
+ dev[0].connect("track", key_mgmt="NONE", scan_freq="2437",
+ freq_list="2437", wait_connect=False)
+ dev[1].request("DISCONNECT")
+ ev = dev[0].wait_event([ "CTRL-EVENT-CONNECTED",
+ "CTRL-EVENT-AUTH-REJECT" ], timeout=10)
+ if ev is None:
+ raise Exception("Unknown connection result")
+ if "CTRL-EVENT-CONNECTED" in ev:
+ raise Exception("Unexpected connection")
+ if "status_code=82" not in ev:
+ raise Exception("Unexpected rejection reason: " + ev)
+ if "ie=34" not in ev:
+ raise Exception("No Neighbor Report element: " + ev)
+ dev[0].request("DISCONNECT")
+
+def test_ap_track_sta_force_5ghz(dev, apdev):
+ """Dualband AP forcing dualband STA to connect on 5 GHz"""
+ try:
+ _test_ap_track_sta_force_5ghz(dev, apdev)
+ finally:
+ subprocess.call(['iw', 'reg', 'set', '00'])
+
+def _test_ap_track_sta_force_5ghz(dev, apdev):
+ params = { "ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "no_probe_resp_if_seen_on": apdev[1]['ifname'],
+ "no_auth_if_seen_on": apdev[1]['ifname'] }
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ bssid = apdev[0]['bssid']
+
+ params = { "ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "track_sta_max_num": "100" }
+ hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
+ bssid2 = apdev[1]['bssid']
+
+ dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
+ dev[0].scan_for_bss(bssid2, freq=5200, force_scan=True)
+
+ dev[0].connect("track", key_mgmt="NONE", scan_freq="2437 5200")
+ freq = dev[0].get_status_field('freq')
+ if freq != '5200':
+ raise Exception("Unexpected operating channel")
+ dev[0].request("DISCONNECT")
+
+def test_ap_track_sta_force_2ghz(dev, apdev):
+ """Dualband AP forcing dualband STA to connect on 2.4 GHz"""
+ try:
+ _test_ap_track_sta_force_2ghz(dev, apdev)
+ finally:
+ subprocess.call(['iw', 'reg', 'set', '00'])
+
+def _test_ap_track_sta_force_2ghz(dev, apdev):
+ params = { "ssid": "track",
+ "country_code": "US",
+ "hw_mode": "g",
+ "channel": "6",
+ "track_sta_max_num": "100" }
+ hapd = hostapd.add_ap(apdev[0]['ifname'], params)
+ bssid = apdev[0]['bssid']
+
+ params = { "ssid": "track",
+ "country_code": "US",
+ "hw_mode": "a",
+ "channel": "40",
+ "no_probe_resp_if_seen_on": apdev[0]['ifname'],
+ "no_auth_if_seen_on": apdev[0]['ifname'] }
+ hapd2 = hostapd.add_ap(apdev[1]['ifname'], params)
+ bssid2 = apdev[1]['bssid']
+
+ dev[0].scan_for_bss(bssid2, freq=5200, force_scan=True)
+ dev[0].scan_for_bss(bssid, freq=2437, force_scan=True)
+
+ dev[0].connect("track", key_mgmt="NONE", scan_freq="2437 5200")
+ freq = dev[0].get_status_field('freq')
+ if freq != '2437':
+ raise Exception("Unexpected operating channel")
+ dev[0].request("DISCONNECT")
diff --git a/tests/hwsim/wpasupplicant.py b/tests/hwsim/wpasupplicant.py
index d2e82e9..8e79c8b 100644
--- a/tests/hwsim/wpasupplicant.py
+++ b/tests/hwsim/wpasupplicant.py
@@ -858,7 +858,7 @@
not_quoted = [ "proto", "key_mgmt", "ieee80211w", "pairwise",
"group", "wep_key0", "wep_key1", "wep_key2", "wep_key3",
- "wep_tx_keyidx", "scan_freq", "eap",
+ "wep_tx_keyidx", "scan_freq", "freq_list", "eap",
"eapol_flags", "fragment_size", "scan_ssid", "auth_alg",
"wpa_ptk_rekey", "disable_ht", "disable_vht", "bssid",
"disable_max_amsdu", "ampdu_factor", "ampdu_density",
