| /* |
| * wpa_supplicant/hostapd / common helper functions, etc. |
| * Copyright (c) 2002-2007, Jouni Malinen <j@w1.fi> |
| * |
| * This software may be distributed under the terms of the BSD license. |
| * See README for more details. |
| */ |
| |
| #include "includes.h" |
| |
| #include "common.h" |
| |
| |
| static int hex2num(char c) |
| { |
| if (c >= '0' && c <= '9') |
| return c - '0'; |
| if (c >= 'a' && c <= 'f') |
| return c - 'a' + 10; |
| if (c >= 'A' && c <= 'F') |
| return c - 'A' + 10; |
| return -1; |
| } |
| |
| |
| int hex2byte(const char *hex) |
| { |
| int a, b; |
| a = hex2num(*hex++); |
| if (a < 0) |
| return -1; |
| b = hex2num(*hex++); |
| if (b < 0) |
| return -1; |
| return (a << 4) | b; |
| } |
| |
| |
| /** |
| * hwaddr_aton - Convert ASCII string to MAC address (colon-delimited format) |
| * @txt: MAC address as a string (e.g., "00:11:22:33:44:55") |
| * @addr: Buffer for the MAC address (ETH_ALEN = 6 bytes) |
| * Returns: 0 on success, -1 on failure (e.g., string not a MAC address) |
| */ |
| int hwaddr_aton(const char *txt, u8 *addr) |
| { |
| int i; |
| |
| for (i = 0; i < 6; i++) { |
| int a, b; |
| |
| a = hex2num(*txt++); |
| if (a < 0) |
| return -1; |
| b = hex2num(*txt++); |
| if (b < 0) |
| return -1; |
| *addr++ = (a << 4) | b; |
| if (i < 5 && *txt++ != ':') |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * hwaddr_compact_aton - Convert ASCII string to MAC address (no colon delimitors format) |
| * @txt: MAC address as a string (e.g., "001122334455") |
| * @addr: Buffer for the MAC address (ETH_ALEN = 6 bytes) |
| * Returns: 0 on success, -1 on failure (e.g., string not a MAC address) |
| */ |
| int hwaddr_compact_aton(const char *txt, u8 *addr) |
| { |
| int i; |
| |
| for (i = 0; i < 6; i++) { |
| int a, b; |
| |
| a = hex2num(*txt++); |
| if (a < 0) |
| return -1; |
| b = hex2num(*txt++); |
| if (b < 0) |
| return -1; |
| *addr++ = (a << 4) | b; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * hwaddr_aton2 - Convert ASCII string to MAC address (in any known format) |
| * @txt: MAC address as a string (e.g., 00:11:22:33:44:55 or 0011.2233.4455) |
| * @addr: Buffer for the MAC address (ETH_ALEN = 6 bytes) |
| * Returns: Characters used (> 0) on success, -1 on failure |
| */ |
| int hwaddr_aton2(const char *txt, u8 *addr) |
| { |
| int i; |
| const char *pos = txt; |
| |
| for (i = 0; i < 6; i++) { |
| int a, b; |
| |
| while (*pos == ':' || *pos == '.' || *pos == '-') |
| pos++; |
| |
| a = hex2num(*pos++); |
| if (a < 0) |
| return -1; |
| b = hex2num(*pos++); |
| if (b < 0) |
| return -1; |
| *addr++ = (a << 4) | b; |
| } |
| |
| return pos - txt; |
| } |
| |
| |
| /** |
| * hexstr2bin - Convert ASCII hex string into binary data |
| * @hex: ASCII hex string (e.g., "01ab") |
| * @buf: Buffer for the binary data |
| * @len: Length of the text to convert in bytes (of buf); hex will be double |
| * this size |
| * Returns: 0 on success, -1 on failure (invalid hex string) |
| */ |
| int hexstr2bin(const char *hex, u8 *buf, size_t len) |
| { |
| size_t i; |
| int a; |
| const char *ipos = hex; |
| u8 *opos = buf; |
| |
| for (i = 0; i < len; i++) { |
| a = hex2byte(ipos); |
| if (a < 0) |
| return -1; |
| *opos++ = a; |
| ipos += 2; |
| } |
| return 0; |
| } |
| |
| |
| /** |
| * inc_byte_array - Increment arbitrary length byte array by one |
| * @counter: Pointer to byte array |
| * @len: Length of the counter in bytes |
| * |
| * This function increments the last byte of the counter by one and continues |
| * rolling over to more significant bytes if the byte was incremented from |
| * 0xff to 0x00. |
| */ |
| void inc_byte_array(u8 *counter, size_t len) |
| { |
| int pos = len - 1; |
| while (pos >= 0) { |
| counter[pos]++; |
| if (counter[pos] != 0) |
| break; |
| pos--; |
| } |
| } |
| |
| |
| void wpa_get_ntp_timestamp(u8 *buf) |
| { |
| struct os_time now; |
| u32 sec, usec; |
| be32 tmp; |
| |
| /* 64-bit NTP timestamp (time from 1900-01-01 00:00:00) */ |
| os_get_time(&now); |
| sec = now.sec + 2208988800U; /* Epoch to 1900 */ |
| /* Estimate 2^32/10^6 = 4295 - 1/32 - 1/512 */ |
| usec = now.usec; |
| usec = 4295 * usec - (usec >> 5) - (usec >> 9); |
| tmp = host_to_be32(sec); |
| os_memcpy(buf, (u8 *) &tmp, 4); |
| tmp = host_to_be32(usec); |
| os_memcpy(buf + 4, (u8 *) &tmp, 4); |
| } |
| |
| |
| static inline int _wpa_snprintf_hex(char *buf, size_t buf_size, const u8 *data, |
| size_t len, int uppercase) |
| { |
| size_t i; |
| char *pos = buf, *end = buf + buf_size; |
| int ret; |
| if (buf_size == 0) |
| return 0; |
| for (i = 0; i < len; i++) { |
| ret = os_snprintf(pos, end - pos, uppercase ? "%02X" : "%02x", |
| data[i]); |
| if (ret < 0 || ret >= end - pos) { |
| end[-1] = '\0'; |
| return pos - buf; |
| } |
| pos += ret; |
| } |
| end[-1] = '\0'; |
| return pos - buf; |
| } |
| |
| /** |
| * wpa_snprintf_hex - Print data as a hex string into a buffer |
| * @buf: Memory area to use as the output buffer |
| * @buf_size: Maximum buffer size in bytes (should be at least 2 * len + 1) |
| * @data: Data to be printed |
| * @len: Length of data in bytes |
| * Returns: Number of bytes written |
| */ |
| int wpa_snprintf_hex(char *buf, size_t buf_size, const u8 *data, size_t len) |
| { |
| return _wpa_snprintf_hex(buf, buf_size, data, len, 0); |
| } |
| |
| |
| /** |
| * wpa_snprintf_hex_uppercase - Print data as a upper case hex string into buf |
| * @buf: Memory area to use as the output buffer |
| * @buf_size: Maximum buffer size in bytes (should be at least 2 * len + 1) |
| * @data: Data to be printed |
| * @len: Length of data in bytes |
| * Returns: Number of bytes written |
| */ |
| int wpa_snprintf_hex_uppercase(char *buf, size_t buf_size, const u8 *data, |
| size_t len) |
| { |
| return _wpa_snprintf_hex(buf, buf_size, data, len, 1); |
| } |
| |
| |
| #ifdef CONFIG_ANSI_C_EXTRA |
| |
| #ifdef _WIN32_WCE |
| void perror(const char *s) |
| { |
| wpa_printf(MSG_ERROR, "%s: GetLastError: %d", |
| s, (int) GetLastError()); |
| } |
| #endif /* _WIN32_WCE */ |
| |
| |
| int optind = 1; |
| int optopt; |
| char *optarg; |
| |
| int getopt(int argc, char *const argv[], const char *optstring) |
| { |
| static int optchr = 1; |
| char *cp; |
| |
| if (optchr == 1) { |
| if (optind >= argc) { |
| /* all arguments processed */ |
| return EOF; |
| } |
| |
| if (argv[optind][0] != '-' || argv[optind][1] == '\0') { |
| /* no option characters */ |
| return EOF; |
| } |
| } |
| |
| if (os_strcmp(argv[optind], "--") == 0) { |
| /* no more options */ |
| optind++; |
| return EOF; |
| } |
| |
| optopt = argv[optind][optchr]; |
| cp = os_strchr(optstring, optopt); |
| if (cp == NULL || optopt == ':') { |
| if (argv[optind][++optchr] == '\0') { |
| optchr = 1; |
| optind++; |
| } |
| return '?'; |
| } |
| |
| if (cp[1] == ':') { |
| /* Argument required */ |
| optchr = 1; |
| if (argv[optind][optchr + 1]) { |
| /* No space between option and argument */ |
| optarg = &argv[optind++][optchr + 1]; |
| } else if (++optind >= argc) { |
| /* option requires an argument */ |
| return '?'; |
| } else { |
| /* Argument in the next argv */ |
| optarg = argv[optind++]; |
| } |
| } else { |
| /* No argument */ |
| if (argv[optind][++optchr] == '\0') { |
| optchr = 1; |
| optind++; |
| } |
| optarg = NULL; |
| } |
| return *cp; |
| } |
| #endif /* CONFIG_ANSI_C_EXTRA */ |
| |
| |
| #ifdef CONFIG_NATIVE_WINDOWS |
| /** |
| * wpa_unicode2ascii_inplace - Convert unicode string into ASCII |
| * @str: Pointer to string to convert |
| * |
| * This function converts a unicode string to ASCII using the same |
| * buffer for output. If UNICODE is not set, the buffer is not |
| * modified. |
| */ |
| void wpa_unicode2ascii_inplace(TCHAR *str) |
| { |
| #ifdef UNICODE |
| char *dst = (char *) str; |
| while (*str) |
| *dst++ = (char) *str++; |
| *dst = '\0'; |
| #endif /* UNICODE */ |
| } |
| |
| |
| TCHAR * wpa_strdup_tchar(const char *str) |
| { |
| #ifdef UNICODE |
| TCHAR *buf; |
| buf = os_malloc((strlen(str) + 1) * sizeof(TCHAR)); |
| if (buf == NULL) |
| return NULL; |
| wsprintf(buf, L"%S", str); |
| return buf; |
| #else /* UNICODE */ |
| return os_strdup(str); |
| #endif /* UNICODE */ |
| } |
| #endif /* CONFIG_NATIVE_WINDOWS */ |
| |
| |
| /** |
| * wpa_ssid_txt - Convert SSID to a printable string |
| * @ssid: SSID (32-octet string) |
| * @ssid_len: Length of ssid in octets |
| * Returns: Pointer to a printable string |
| * |
| * This function can be used to convert SSIDs into printable form. In most |
| * cases, SSIDs do not use unprintable characters, but IEEE 802.11 standard |
| * does not limit the used character set, so anything could be used in an SSID. |
| * |
| * This function uses a static buffer, so only one call can be used at the |
| * time, i.e., this is not re-entrant and the returned buffer must be used |
| * before calling this again. |
| */ |
| const char * wpa_ssid_txt(const u8 *ssid, size_t ssid_len) |
| { |
| static char ssid_txt[33]; |
| char *pos; |
| |
| if (ssid_len > 32) |
| ssid_len = 32; |
| os_memcpy(ssid_txt, ssid, ssid_len); |
| ssid_txt[ssid_len] = '\0'; |
| for (pos = ssid_txt; *pos != '\0'; pos++) { |
| #ifndef WPA_UNICODE_SSID |
| if ((u8) *pos < 32 || (u8) *pos >= 127) |
| *pos = '_'; |
| #endif |
| } |
| return ssid_txt; |
| } |
| |
| |
| void * __hide_aliasing_typecast(void *foo) |
| { |
| return foo; |
| } |