examples/php/route_guide/route_guide_client.php

<?php
/*
 *
 * Copyright 2015 gRPC authors.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 *
 */

// php:generate protoc --proto_path=./../../protos  --php_out=./  --grpc_out=./ --plugin=protoc-gen-grpc=./../../../bins/opt/grpc_php_plugin ./../../protos/route_guide.proto

require dirname(__FILE__).'/../vendor/autoload.php';

define('COORD_FACTOR', 1e7);

$client = new Routeguide\RouteGuideClient('localhost:50051', [
    'credentials' => Grpc\ChannelCredentials::createInsecure(),
]);

function printFeature($feature)
{
    $name = $feature->getName();
    if (!$name) {
        $name_str = 'no feature';
    } else {
        $name_str = "feature called $name";
    }
    echo sprintf(
        "Found %s \n  at %f, %f\n",
        $name_str,
                 $feature->getLocation()->getLatitude() / COORD_FACTOR,
                 $feature->getLocation()->getLongitude() / COORD_FACTOR
    );
}

/**
 * Run the getFeature demo. Calls getFeature with a point known to have a
 * feature and a point known not to have a feature.
 */
function runGetFeature()
{
    echo "Running GetFeature...\n";
    global $client;

    $point = new Routeguide\Point();
    $points = array(
        array(409146138, -746188906),
        array(0, 0),
    );

    foreach ($points as $p) {
        $point->setLatitude($p[0]);
        $point->setLongitude($p[1]);
        // make a unary grpc call
        list($feature, $status) = $client->GetFeature($point)->wait();
        printFeature($feature);
    }
}

/**
 * Run the listFeatures demo. Calls listFeatures with a rectangle
 * containing all of the features in the pre-generated
 * database. Prints each response as it comes in.
 */
function runListFeatures()
{
    echo "Running ListFeatures...\n";
    global $client;

    $lo_point = new Routeguide\Point();
    $hi_point = new Routeguide\Point();

    $lo_point->setLatitude(400000000);
    $lo_point->setLongitude(-750000000);
    $hi_point->setLatitude(420000000);
    $hi_point->setLongitude(-730000000);

    $rectangle = new Routeguide\Rectangle();
    $rectangle->setLo($lo_point);
    $rectangle->setHi($hi_point);

    // start the server streaming call
    $call = $client->ListFeatures($rectangle);
    // an iterator over the server streaming responses
    $features = $call->responses();
    foreach ($features as $feature) {
        printFeature($feature);
    }
}

/**
 * Run the recordRoute demo. Sends several randomly chosen points from the
 * pre-generated feature database with a variable delay in between. Prints
 * the statistics when they are sent from the server.
 */
function runRecordRoute()
{
    echo "Running RecordRoute...\n";
    global $client, $argv;

    // start the client streaming call
    $call = $client->RecordRoute();

    $db = json_decode(file_get_contents($argv[1]), true);
    $num_points_in_db = count($db);
    $num_points = 10;
    for ($i = 0; $i < $num_points; ++$i) {
        $point = new Routeguide\Point();
        $index = rand(0, $num_points_in_db - 1);
        $lat = $db[$index]['location']['latitude'];
        $long = $db[$index]['location']['longitude'];
        $feature_name = $db[$index]['name'];
        $point->setLatitude($lat);
        $point->setLongitude($long);
        echo sprintf(
            "Visiting point %f, %f,\n  with feature name: %s\n",
                     $lat / COORD_FACTOR,
            $long / COORD_FACTOR,
                     $feature_name ? $feature_name : '<empty>'
        );
        usleep(rand(300000, 800000));
        $call->write($point);
    }
    list($route_summary, $status) = $call->wait();
    echo sprintf(
        "Finished trip with %d points\nPassed %d features\n".
                 "Travelled %d meters\nIt took %d seconds\n",
                 $route_summary->getPointCount(),
                 $route_summary->getFeatureCount(),
                 $route_summary->getDistance(),
                 $route_summary->getElapsedTime()
    );
}

/**
 * Run the routeChat demo. Send some chat messages, and print any chat
 * messages that are sent from the server.
 */
function runRouteChat()
{
    echo "Running RouteChat...\n";
    global $client;

    // start the bidirectional streaming call
    $call = $client->RouteChat();

    $notes = array(
        array(1, 1, 'first message'),
        array(1, 2, 'second message'),
        array(2, 1, 'third message'),
        array(1, 1, 'fourth message'),
        array(1, 1, 'fifth message'),
    );

    foreach ($notes as $n) {
        $point = new Routeguide\Point();
        $point->setLatitude($lat = $n[0]);
        $point->setLongitude($long = $n[1]);

        $route_note = new Routeguide\RouteNote();
        $route_note->setLocation($point);
        $route_note->setMessage($message = $n[2]);

        echo sprintf(
            "Sending message: '%s' at (%d, %d)\n",
                     $message,
            $lat,
            $long
        );
        // send a bunch of messages to the server
        $call->write($route_note);
    }
    $call->writesDone();

    // read from the server until there's no more
    while ($route_note_reply = $call->read()) {
        echo sprintf(
            "Previous left message at (%d, %d): '%s'\n",
                     $route_note_reply->getLocation()->getLatitude(),
                     $route_note_reply->getLocation()->getLongitude(),
                     $route_note_reply->getMessage()
        );
    }
}

/**
 * Run all of the demos in order.
 */
function main()
{
    runGetFeature();
    runListFeatures();
    runRecordRoute();
    runRouteChat();
}

if (empty($argv[1])) {
    echo 'Usage: php -d extension=grpc.so route_guide_client.php '.
        "<path to route_guide_db.json>\n";
    exit(1);
}
main();