acinclude.m4

## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
## Copyright (C) 1996-1999 Free Software Foundation, Inc.
## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
## General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
##
## As a special exception to the GNU General Public License, if you
## distribute this file as part of a program that contains a
## configuration script generated by Autoconf, you may include it under
## the same distribution terms that you use for the rest of that program.

# serial 40 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl

# Save cache, so that ltconfig can load it
AC_CACHE_SAVE

# Actually configure libtool.  ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])

# Reload cache, that may have been modified by ltconfig
AC_CACHE_LOAD

# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"

# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
AC_SUBST(LIBTOOL)dnl

# Redirect the config.log output again, so that the ltconfig log is not
# clobbered by the next message.
exec 5>>./config.log
])

AC_DEFUN(AC_LIBTOOL_SETUP,
[AC_PREREQ(2.13)dnl
AC_REQUIRE([AC_ENABLE_SHARED])dnl
AC_REQUIRE([AC_ENABLE_STATIC])dnl
AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl

# Check for any special flags to pass to ltconfig.
libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
  [  --disable-libtool-lock  avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"

# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case "$host" in
*-*-irix6*)
  # Find out which ABI we are using.
  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
  if AC_TRY_EVAL(ac_compile); then
    case "`/usr/bin/file conftest.o`" in
    *32-bit*)
      LD="${LD-ld} -32"
      ;;
    *N32*)
      LD="${LD-ld} -n32"
      ;;
    *64-bit*)
      LD="${LD-ld} -64"
      ;;
    esac
  fi
  rm -rf conftest*
  ;;

*-*-sco3.2v5*)
  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
  SAVE_CFLAGS="$CFLAGS"
  CFLAGS="$CFLAGS -belf"
  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
    [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])])
  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
    CFLAGS="$SAVE_CFLAGS"
  fi
  ;;

ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
  AC_CHECK_TOOL(DLLTOOL, dlltool, false)
  AC_CHECK_TOOL(AS, as, false)
  AC_CHECK_TOOL(OBJDUMP, objdump, false)
  ;;
])
esac
])

# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])

# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])

# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<<  --enable-shared[=PKGS]  build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
  enable_shared=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_shared=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])

# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])

# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<<  --enable-static[=PKGS]  build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
  enable_static=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_static=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])

# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])


# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
#   Where DEFAULT is either `yes' or `no'.  If omitted, it defaults to
#   `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<<  --enable-fast-install[=PKGS]  optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
changequote([, ])dnl
[p=${PACKAGE-default}
case "$enableval" in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
  enable_fast_install=no
  # Look at the argument we got.  We use all the common list separators.
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
  for pkg in $enableval; do
    if test "X$pkg" = "X$p"; then
      enable_fast_install=yes
    fi
  done
  IFS="$ac_save_ifs"
  ;;
esac],
enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])

# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])

# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
[AC_ARG_WITH(gnu-ld,
[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_CANONICAL_BUILD])dnl
ac_prog=ld
if test "$ac_cv_prog_gcc" = yes; then
  # Check if gcc -print-prog-name=ld gives a path.
  AC_MSG_CHECKING([for ld used by GCC])
  ac_prog=`($CC -print-prog-name=ld) 2>&5`
  case "$ac_prog" in
    # Accept absolute paths.
changequote(,)dnl
    [\\/]* | [A-Za-z]:[\\/]*)
      re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
      # Canonicalize the path of ld
      ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
      while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
	ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
      done
      test -z "$LD" && LD="$ac_prog"
      ;;
  "")
    # If it fails, then pretend we aren't using GCC.
    ac_prog=ld
    ;;
  *)
    # If it is relative, then search for the first ld in PATH.
    with_gnu_ld=unknown
    ;;
  esac
elif test "$with_gnu_ld" = yes; then
  AC_MSG_CHECKING([for GNU ld])
else
  AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH; do
    test -z "$ac_dir" && ac_dir=.
    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
      ac_cv_path_LD="$ac_dir/$ac_prog"
      # Check to see if the program is GNU ld.  I'd rather use --version,
      # but apparently some GNU ld's only accept -v.
      # Break only if it was the GNU/non-GNU ld that we prefer.
      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
	test "$with_gnu_ld" != no && break
      else
	test "$with_gnu_ld" != yes && break
      fi
    fi
  done
  IFS="$ac_save_ifs"
else
  ac_cv_path_LD="$LD" # Let the user override the test with a path.
fi])
LD="$ac_cv_path_LD"
if test -n "$LD"; then
  AC_MSG_RESULT($LD)
else
  AC_MSG_RESULT(no)
fi
test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
AC_SUBST(LD)
AC_PROG_LD_GNU
])

AC_DEFUN(AC_PROG_LD_GNU,
[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
  ac_cv_prog_gnu_ld=yes
else
  ac_cv_prog_gnu_ld=no
fi])
])

# AC_PROG_NM - find the path to a BSD-compatible name lister
AC_DEFUN(AC_PROG_NM,
[AC_MSG_CHECKING([for BSD-compatible nm])
AC_CACHE_VAL(ac_cv_path_NM,
[if test -n "$NM"; then
  # Let the user override the test.
  ac_cv_path_NM="$NM"
else
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
  for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
      # Check to see if the nm accepts a BSD-compat flag.
      # Adding the `sed 1q' prevents false positives on HP-UX, which says:
      #   nm: unknown option "B" ignored
      if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -B"
	break
      elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
	ac_cv_path_NM="$ac_dir/nm -p"
	break
      else
	ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
	continue # so that we can try to find one that supports BSD flags
      fi
    fi
  done
  IFS="$ac_save_ifs"
  test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
fi])
NM="$ac_cv_path_NM"
AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])

# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
LIBM=
case "$host" in
*-*-beos* | *-*-cygwin*)
  # These system don't have libm
  ;;
*-ncr-sysv4.3*)
  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
  AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
  ;;
*)
  AC_CHECK_LIB(m, main, LIBM="-lm")
  ;;
esac
])

# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl convenience library, adds --enable-ltdl-convenience to
# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  case "$enable_ltdl_convenience" in
  no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
  "") enable_ltdl_convenience=yes
      ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
  esac
  LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la
  INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
])

# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
# the libltdl installable library, and adds --enable-ltdl-install to
# the configure arguments.  Note that LIBLTDL is not AC_SUBSTed, nor
# is AC_CONFIG_SUBDIRS called.  If DIR is not provided, it is assumed
# to be `${top_builddir}/libltdl'.  Make sure you start DIR with
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
  AC_CHECK_LIB(ltdl, main,
  [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
  [if test x"$enable_ltdl_install" = xno; then
     AC_MSG_WARN([libltdl not installed, but installation disabled])
   else
     enable_ltdl_install=yes
   fi
  ])
  if test x"$enable_ltdl_install" = x"yes"; then
    ac_configure_args="$ac_configure_args --enable-ltdl-install"
    LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
    INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl'])
  else
    ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
    LIBLTDL="-lltdl"
    INCLTDL=
  fi
])

dnl old names
AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl

dnl This is just to silence aclocal about the macro not being used
ifelse([AC_DISABLE_FAST_INSTALL])dnl


# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# Modified to never use included libintl. 
# Owen Taylor <otaylor@redhat.com>, 12/15/1998
#
#
# This file can be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU Public License
# but which still want to provide support for the GNU gettext functionality.
# Please note that the actual code is *not* freely available.
#
#
# If you make changes to this file, you MUST update the copy in
# acinclude.m4. [ aclocal dies on duplicate macros, so if
# we run 'aclocal -I macros/' then we'll run into problems
# once we've installed glib-gettext.m4 :-( ]
#

# serial 5

AC_DEFUN(AM_GLIB_WITH_NLS,
  [AC_MSG_CHECKING([whether NLS is requested])
    dnl Default is enabled NLS
    AC_ARG_ENABLE(nls,
      [  --disable-nls           do not use Native Language Support],
      USE_NLS=$enableval, USE_NLS=yes)
    AC_MSG_RESULT($USE_NLS)
    AC_SUBST(USE_NLS)

    USE_INCLUDED_LIBINTL=no

    dnl If we use NLS figure out what method
    if test "$USE_NLS" = "yes"; then
#      AC_DEFINE(ENABLE_NLS)
#      AC_MSG_CHECKING([whether included gettext is requested])
#      AC_ARG_WITH(included-gettext,
#        [  --with-included-gettext use the GNU gettext library included here],
#        nls_cv_force_use_gnu_gettext=$withval,
#        nls_cv_force_use_gnu_gettext=no)
#      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)
      nls_cv_force_use_gnu_gettext="no"

      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
        dnl User does not insist on using GNU NLS library.  Figure out what
        dnl to use.  If gettext or catgets are available (in this order) we
        dnl use this.  Else we have to fall back to GNU NLS library.
	dnl catgets is only used if permitted by option --with-catgets.
	nls_cv_header_intl=
	nls_cv_header_libgt=
	CATOBJEXT=NONE

	AC_CHECK_HEADER(libintl.h,
	  [AC_CACHE_CHECK([for dgettext in libc], gt_cv_func_dgettext_libc,
	    [AC_TRY_LINK([#include <libintl.h>], [return (int) dgettext ("","")],
	       gt_cv_func_dgettext_libc=yes, gt_cv_func_dgettext_libc=no)])

	   if test "$gt_cv_func_dgettext_libc" != "yes"; then
	     AC_CHECK_LIB(intl, bindtextdomain,
	       [AC_CACHE_CHECK([for dgettext in libintl],
		 gt_cv_func_dgettext_libintl,
		 [AC_CHECK_LIB(intl, dgettext,
		  gt_cv_func_dgettext_libintl=yes,
		  gt_cv_func_dgettext_libintl=no)],
		 gt_cv_func_dgettext_libintl=no)])
	   fi

           if test "$gt_cv_func_dgettext_libintl" = "yes"; then
	     LIBS="$LIBS -lintl";
           fi

	   if test "$gt_cv_func_dgettext_libc" = "yes" \
	      || test "$gt_cv_func_dgettext_libintl" = "yes"; then
	      AC_DEFINE(HAVE_GETTEXT)
	      AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
		[test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)dnl
	      if test "$MSGFMT" != "no"; then
		AC_CHECK_FUNCS(dcgettext)
		AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
		AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
		  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
		AC_TRY_LINK(, [extern int _nl_msg_cat_cntr;
			       return _nl_msg_cat_cntr],
		  [CATOBJEXT=.gmo
		   DATADIRNAME=share],
		  [CATOBJEXT=.mo
		   DATADIRNAME=lib])
		INSTOBJEXT=.mo
	      fi
	    fi

	    # Added by Martin Baulig 12/15/98 for libc5 systems
	    if test "$gt_cv_func_dgettext_libc" != "yes" \
	       && test "$gt_cv_func_dgettext_libintl" = "yes"; then
	       INTLLIBS=-lintl
	       LIBS=`echo $LIBS | sed -e 's/-lintl//'`
	    fi
	])

#        if test "$CATOBJEXT" = "NONE"; then
#	  AC_MSG_CHECKING([whether catgets can be used])
#	  AC_ARG_WITH(catgets,
#	    [  --with-catgets          use catgets functions if available],
#	    nls_cv_use_catgets=$withval, nls_cv_use_catgets=no)
#	  AC_MSG_RESULT($nls_cv_use_catgets)
#
#	  if test "$nls_cv_use_catgets" = "yes"; then
#	    dnl No gettext in C library.  Try catgets next.
#	    AC_CHECK_LIB(i, main)
#	    AC_CHECK_FUNC(catgets,
#	      [AC_DEFINE(HAVE_CATGETS)
#	       INTLOBJS="\$(CATOBJS)"
#	       AC_PATH_PROG(GENCAT, gencat, no)dnl
#	       if test "$GENCAT" != "no"; then
#		 AC_PATH_PROG(GMSGFMT, gmsgfmt, no)
#		 if test "$GMSGFMT" = "no"; then
#		   AM_PATH_PROG_WITH_TEST(GMSGFMT, msgfmt,
#		    [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], no)
#		 fi
#		 AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
#		   [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
#		 USE_INCLUDED_LIBINTL=yes
#		 CATOBJEXT=.cat
#		 INSTOBJEXT=.cat
#		 DATADIRNAME=lib
#		 INTLDEPS='$(top_builddir)/intl/libintl.a'
#		 INTLLIBS=$INTLDEPS
#		 LIBS=`echo $LIBS | sed -e 's/-lintl//'`
#		 nls_cv_header_intl=intl/libintl.h
#		 nls_cv_header_libgt=intl/libgettext.h
#              fi
#            ])
#	  fi
#        fi

        if test "$CATOBJEXT" = "NONE"; then
	  dnl Neither gettext nor catgets in included in the C library.
	  dnl Fall back on GNU gettext library.
	  nls_cv_use_gnu_gettext=yes
        fi
      fi

      if test "$nls_cv_use_gnu_gettext" != "yes"; then
        AC_DEFINE(ENABLE_NLS)
      else
         dnl Unset this variable since we use the non-zero value as a flag.
         CATOBJEXT=
#        dnl Mark actions used to generate GNU NLS library.
#        INTLOBJS="\$(GETTOBJS)"
#        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
#	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"], msgfmt)
#        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
#        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
#	  [test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"], :)
#        AC_SUBST(MSGFMT)
#	USE_INCLUDED_LIBINTL=yes
#        CATOBJEXT=.gmo
#        INSTOBJEXT=.mo
#        DATADIRNAME=share
#	INTLDEPS='$(top_builddir)/intl/libintl.a'
#	INTLLIBS=$INTLDEPS
#	LIBS=`echo $LIBS | sed -e 's/-lintl//'`
#        nls_cv_header_intl=intl/libintl.h
#        nls_cv_header_libgt=intl/libgettext.h
      fi

      dnl Test whether we really found GNU xgettext.
      if test "$XGETTEXT" != ":"; then
	dnl If it is no GNU xgettext we define it as : so that the
	dnl Makefiles still can work.
	if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
	  : ;
	else
	  AC_MSG_RESULT(
	    [found xgettext program is not GNU xgettext; ignore it])
	  XGETTEXT=":"
	fi
      fi

      # We need to process the po/ directory.
      POSUB=po
    else
      DATADIRNAME=share
#      nls_cv_header_intl=intl/libintl.h
#      nls_cv_header_libgt=intl/libgettext.h
    fi
#    AC_LINK_FILES($nls_cv_header_libgt, $nls_cv_header_intl)
    AC_OUTPUT_COMMANDS(
     [case "$CONFIG_FILES" in *po/Makefile.in*)
        sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile
      esac])


#    # If this is used in GNU gettext we have to set USE_NLS to `yes'
#    # because some of the sources are only built for this goal.
#    if test "$PACKAGE" = gettext; then
#      USE_NLS=yes
#      USE_INCLUDED_LIBINTL=yes
#    fi

    dnl These rules are solely for the distribution goal.  While doing this
    dnl we only have to keep exactly one list of the available catalogs
    dnl in configure.in.
    for lang in $ALL_LINGUAS; do
      GMOFILES="$GMOFILES $lang.gmo"
      POFILES="$POFILES $lang.po"
    done

    dnl Make all variables we use known to autoconf.
    AC_SUBST(USE_INCLUDED_LIBINTL)
    AC_SUBST(CATALOGS)
    AC_SUBST(CATOBJEXT)
    AC_SUBST(DATADIRNAME)
    AC_SUBST(GMOFILES)
    AC_SUBST(INSTOBJEXT)
    AC_SUBST(INTLDEPS)
    AC_SUBST(INTLLIBS)
    AC_SUBST(INTLOBJS)
    AC_SUBST(POFILES)
    AC_SUBST(POSUB)
  ])

AC_DEFUN(AM_GLIB_GNU_GETTEXT,
  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
   AC_REQUIRE([AC_PROG_CC])dnl
   AC_REQUIRE([AC_PROG_RANLIB])dnl
#   AC_REQUIRE([AC_ISC_POSIX])dnl
   AC_REQUIRE([AC_HEADER_STDC])dnl
   AC_REQUIRE([AC_C_CONST])dnl
   AC_REQUIRE([AC_C_INLINE])dnl
   AC_REQUIRE([AC_TYPE_OFF_T])dnl
   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
   AC_REQUIRE([AC_FUNC_MMAP])dnl

   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h string.h \
unistd.h sys/param.h])
   AC_CHECK_FUNCS([getcwd munmap putenv setenv setlocale strchr strcasecmp \
strdup __argz_count __argz_stringify __argz_next])

#   if test "${ac_cv_func_stpcpy+set}" != "set"; then
#     AC_CHECK_FUNCS(stpcpy)
#   fi
#   if test "${ac_cv_func_stpcpy}" = "yes"; then
#     AC_DEFINE(HAVE_STPCPY)
#   fi

   AM_LC_MESSAGES
   AM_GLIB_WITH_NLS

   if test "x$CATOBJEXT" != "x"; then
     if test "x$ALL_LINGUAS" = "x"; then
       LINGUAS=
     else
       AC_MSG_CHECKING(for catalogs to be installed)
       NEW_LINGUAS=
       for lang in ${LINGUAS=$ALL_LINGUAS}; do
         case "$ALL_LINGUAS" in
          *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;;
         esac
       done
       LINGUAS=$NEW_LINGUAS
       AC_MSG_RESULT($LINGUAS)
     fi

     dnl Construct list of names of catalog files to be constructed.
     if test -n "$LINGUAS"; then
       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
     fi
   fi

#   dnl The reference to <locale.h> in the installed <libintl.h> file
#   dnl must be resolved because we cannot expect the users of this
#   dnl to define HAVE_LOCALE_H.
#   if test $ac_cv_header_locale_h = yes; then
#     INCLUDE_LOCALE_H="#include <locale.h>"
#   else
#     INCLUDE_LOCALE_H="\
#/* The system does not provide the header <locale.h>.  Take care yourself.  */"
#   fi
#   AC_SUBST(INCLUDE_LOCALE_H)

   dnl Determine which catalog format we have (if any is needed)
   dnl For now we know about two different formats:
   dnl   Linux libc-5 and the normal X/Open format
   test -d po || mkdir po
   if test "$CATOBJEXT" = ".cat"; then
     AC_CHECK_HEADER(linux/version.h, msgformat=linux, msgformat=xopen)

     dnl Transform the SED scripts while copying because some dumb SEDs
     dnl cannot handle comments.
     sed -e '/^#/d' $srcdir/po/$msgformat-msg.sed > po/po2msg.sed
   fi
   dnl po2tbl.sed is always needed.
   sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \
     $srcdir/po/po2tbl.sed.in > po/po2tbl.sed

#   dnl In the intl/Makefile.in we have a special dependency which makes
#   dnl only sense for gettext.  We comment this out for non-gettext
#   dnl packages.
#   if test "$PACKAGE" = "gettext"; then
#     GT_NO="#NO#"
#     GT_YES=
#   else
#     GT_NO=
#     GT_YES="#YES#"
#   fi
#   AC_SUBST(GT_NO)
#   AC_SUBST(GT_YES)

   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
   dnl find the mkinstalldirs script in another subdir but ($top_srcdir).
   dnl Try to locate is.
   MKINSTALLDIRS=
   if test -n "$ac_aux_dir"; then
     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
   fi
   if test -z "$MKINSTALLDIRS"; then
     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
   fi
   AC_SUBST(MKINSTALLDIRS)

#   dnl *** For now the libtool support in intl/Makefile is not for real.
#   l=
#   AC_SUBST(l)

   dnl Generate list of files to be processed by xgettext which will
   dnl be included in po/Makefile.
   test -d po || mkdir po
   if test "x$srcdir" != "x."; then
     if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then
       posrcprefix="$srcdir/"
     else
       posrcprefix="../$srcdir/"
     fi
   else
     posrcprefix="../"
   fi
   rm -f po/POTFILES
   sed -e "/^#/d" -e "/^\$/d" -e "s,.*,	$posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \
	< $srcdir/po/POTFILES.in > po/POTFILES
  ])