| # glib |
| # Young-Ho Cha <ganadist@chollian.net>, 2002 |
| # Changwoo Ryu <cwryu@debian.org>, 2002, 2004 |
| # |
| msgid "" |
| msgstr "" |
| "Project-Id-Version: glib 2.3.1\n" |
| "Report-Msgid-Bugs-To: \n" |
| "POT-Creation-Date: 2004-10-08 14:13-0400\n" |
| "PO-Revision-Date: 2004-05-09 21:47+0900\n" |
| "Last-Translator: Changwoo Ryu <cwryu@debian.org>\n" |
| "Language-Team: GNOME Korea <gnome-kr-hackers@lists.kldp.net>\n" |
| "MIME-Version: 1.0\n" |
| "Content-Type: text/plain; charset=UTF-8\n" |
| "Content-Transfer-Encoding: 8bit\n" |
| |
| #: glib/gconvert.c:402 |
| #, c-format |
| msgid "Conversion from character set '%s' to '%s' is not supported" |
| msgstr "문자셋 '%s'에서 '%s'(으)로 변환은 지원되지 않습니다" |
| |
| #: glib/gconvert.c:406 |
| #, c-format |
| msgid "Could not open converter from '%s' to '%s'" |
| msgstr "'%s'에서 '%s'(으)로 변환하는 변환기를 열 수 없습니다" |
| |
| #: glib/gconvert.c:604 glib/gconvert.c:891 glib/giochannel.c:1315 |
| #: glib/giochannel.c:1357 glib/giochannel.c:2199 glib/gutf8.c:910 |
| #: glib/gutf8.c:1355 |
| msgid "Invalid byte sequence in conversion input" |
| msgstr "변환 입력에서 잘못된 바이트 순서" |
| |
| #: glib/gconvert.c:609 glib/gconvert.c:824 glib/giochannel.c:1322 |
| #: glib/giochannel.c:2211 |
| #, c-format |
| msgid "Error during conversion: %s" |
| msgstr "변환중 오류: %s" |
| |
| #: glib/gconvert.c:627 glib/gutf8.c:906 glib/gutf8.c:1106 glib/gutf8.c:1247 |
| #: glib/gutf8.c:1351 |
| msgid "Partial character sequence at end of input" |
| msgstr "입력의 끝에서 부분적인 문자 순서" |
| |
| #: glib/gconvert.c:800 |
| #, c-format |
| msgid "Cannot convert fallback '%s' to codeset '%s'" |
| msgstr "코드셋 '%2$s'에서 대체하는 '%1$s'(으)로 변환 못함" |
| |
| #: glib/gconvert.c:1497 |
| #, c-format |
| msgid "The URI '%s' is not an absolute URI using the file scheme" |
| msgstr "URI '%s'은(는) 파일스키마를 사용하는 완전한 URI가 아닙니다" |
| |
| #: glib/gconvert.c:1507 |
| #, c-format |
| msgid "The local file URI '%s' may not include a '#'" |
| msgstr "로컬 파일 URI '%s'은(는) '#'를 포함하지 않습니다" |
| |
| #: glib/gconvert.c:1524 |
| #, c-format |
| msgid "The URI '%s' is invalid" |
| msgstr "URI '%s'이(가) 잘못되었습니다" |
| |
| #: glib/gconvert.c:1536 |
| #, c-format |
| msgid "The hostname of the URI '%s' is invalid" |
| msgstr "URI '%s'의 호스트 이름이 잘못되었습니다" |
| |
| #: glib/gconvert.c:1552 |
| #, c-format |
| msgid "The URI '%s' contains invalidly escaped characters" |
| msgstr "URI '%s'은(는) 잘못된 이스케이프 문자를 포함합니다" |
| |
| #: glib/gconvert.c:1622 |
| #, c-format |
| msgid "The pathname '%s' is not an absolute path" |
| msgstr "경로이름 '%s'은(는) 절대 경로가 아닙니다" |
| |
| #: glib/gconvert.c:1632 |
| msgid "Invalid hostname" |
| msgstr "잘못된 호스트 이름" |
| |
| #: glib/gdir.c:83 |
| #, c-format |
| msgid "Error opening directory '%s': %s" |
| msgstr "디렉토리 '%s' 여는 중 오류 : %s" |
| |
| #: glib/gfileutils.c:395 glib/gfileutils.c:469 |
| #, c-format |
| msgid "Could not allocate %lu bytes to read file \"%s\"" |
| msgstr "파일 \"%2$s\"을(를) 읽은 %1$lu 바이트를 할당할 수 없습니다" |
| |
| #: glib/gfileutils.c:411 |
| #, c-format |
| msgid "Error reading file '%s': %s" |
| msgstr "파일 '%s'을(를) 읽는 중 오류: %s" |
| |
| #: glib/gfileutils.c:494 |
| #, c-format |
| msgid "Failed to read from file '%s': %s" |
| msgstr "파일 '%s'에서 읽기 실패 : %s" |
| |
| #: glib/gfileutils.c:545 glib/gfileutils.c:626 |
| #, c-format |
| msgid "Failed to open file '%s': %s" |
| msgstr "파일 '%s' 열기 실패 : %s" |
| |
| #: glib/gfileutils.c:562 |
| #, c-format |
| msgid "Failed to get attributes of file '%s': fstat() failed: %s" |
| msgstr "파일 '%s'의 속성을 가져오기 실패 : fstat() 실패: %s" |
| |
| #: glib/gfileutils.c:593 |
| #, c-format |
| msgid "Failed to open file '%s': fdopen() failed: %s" |
| msgstr "파일 '%s' 열기 실패: fdopen() 실패: %s" |
| |
| #: glib/gfileutils.c:812 |
| #, c-format |
| msgid "Template '%s' invalid, should not contain a '%s'" |
| msgstr "템플리트 '%s'이(가) 잘못되었습니다, '%s'을(를) 포함하지 않아야 합니다" |
| |
| #: glib/gfileutils.c:824 |
| #, c-format |
| msgid "Template '%s' doesn't end with XXXXXX" |
| msgstr "템플리트 '%s'이(가) XXXXXX로 끝나지 않았습니다" |
| |
| #: glib/gfileutils.c:845 |
| #, c-format |
| msgid "Failed to create file '%s': %s" |
| msgstr "파일 '%s' 만들기 실패: %s" |
| |
| #: glib/gfileutils.c:1188 |
| #, c-format |
| msgid "Failed to read the symbolic link '%s': %s" |
| msgstr "심볼릭 링크 '%s' 읽기 실패: %s" |
| |
| #: glib/gfileutils.c:1209 |
| msgid "Symbolic links not supported" |
| msgstr "심볼릭 링크를 지원하지 않습니다" |
| |
| #: glib/giochannel.c:1143 |
| #, c-format |
| msgid "Conversion from character set `%s' to `%s' is not supported" |
| msgstr "문자셋 `%s'에서 `%s'(으)로 변환을 지원하지 않습니다" |
| |
| #: glib/giochannel.c:1147 |
| #, c-format |
| msgid "Could not open converter from `%s' to `%s': %s" |
| msgstr "`%s'에서 `%s'(으)로 변환하는 변환기를 열 수 없음: %s" |
| |
| #: glib/giochannel.c:1492 |
| msgid "Can't do a raw read in g_io_channel_read_line_string" |
| msgstr "g_io_channel_read_line_string으로 raw 일기를 할 수 없습니다" |
| |
| #: glib/giochannel.c:1539 glib/giochannel.c:1796 glib/giochannel.c:1882 |
| msgid "Leftover unconverted data in read buffer" |
| msgstr "읽기 버퍼에서 변환되지 않은 데이터를 남겨둠" |
| |
| #: glib/giochannel.c:1619 glib/giochannel.c:1696 |
| msgid "Channel terminates in a partial character" |
| msgstr "일부 문자에서 채널 끝냄" |
| |
| #: glib/giochannel.c:1682 |
| msgid "Can't do a raw read in g_io_channel_read_to_end" |
| msgstr "g_io_channel_read_to_endi로 raw 읽기를 할 수 없습니다" |
| |
| #: glib/gmarkup.c:225 |
| #, c-format |
| msgid "Error on line %d char %d: %s" |
| msgstr "%d째 줄 %d 문자에서 오류: %s" |
| |
| #: glib/gmarkup.c:309 |
| #, c-format |
| msgid "Error on line %d: %s" |
| msgstr "%d째 줄에서 오류: %s" |
| |
| #: glib/gmarkup.c:414 |
| msgid "" |
| "Empty entity '&;' seen; valid entities are: & " < > '" |
| msgstr "" |
| "비어있는 엔티티 '&;'를 찾았습니다; 올바른 엔티티는 : & " < > " |
| "' 입니다" |
| |
| # FIXME: "escape"라는 동사를 번역? |
| #: glib/gmarkup.c:424 |
| #, c-format |
| msgid "" |
| "Character '%s' is not valid at the start of an entity name; the & character " |
| "begins an entity; if this ampersand isn't supposed to be an entity, escape " |
| "it as &" |
| msgstr "" |
| "'%s' 문자는 엔티티 이름의 시작에 쓸 수 없는 문자입니다. 엔티티는 & 문자로 시" |
| "작합니다. 이 & 기호가 엔티티에 사용되는 것이 아닌 경우에는, & 라고 쓰십" |
| "시오" |
| |
| #: glib/gmarkup.c:460 |
| #, c-format |
| msgid "Character '%s' is not valid inside an entity name" |
| msgstr "문자 '%s'은(는) 엔티티 이름에서 올바르지 않습니다" |
| |
| #: glib/gmarkup.c:504 |
| #, c-format |
| msgid "Entity name '%s' is not known" |
| msgstr "엔티티 이름 '%s'이(가) 알려져 있지 않습니다" |
| |
| # FIXME: "escape"라는 동사를 번역? |
| #: glib/gmarkup.c:514 |
| msgid "" |
| "Entity did not end with a semicolon; most likely you used an ampersand " |
| "character without intending to start an entity - escape ampersand as &" |
| msgstr "" |
| "엔티티가 세미콜론으로 끝나지 않습니다; 대부분의 경우 엔티티 시작에 사용하려" |
| "고 하지 않은 곳에서 & 기호를 사용한 경우일 것입니다 - 이런 경우 & 라고쓰" |
| "십시오" |
| |
| #: glib/gmarkup.c:560 |
| #, c-format |
| msgid "" |
| "Failed to parse '%s', which should have been a digit inside a character " |
| "reference (ê for example) - perhaps the digit is too large" |
| msgstr "" |
| "'%s'의 구문해석에 실패했습니다. 문자 참조에는 숫자를 써야 합니다 (예를 들어 " |
| "ê) - 숫자가 너무 클 수도 있습니다" |
| |
| #: glib/gmarkup.c:585 |
| #, c-format |
| msgid "Character reference '%s' does not encode a permitted character" |
| msgstr "문자 참조 '%s'에 대응되는 문자는 허용되지 않습니다" |
| |
| #: glib/gmarkup.c:602 |
| msgid "Empty character reference; should include a digit such as dž" |
| msgstr "문자 참조가 비어 있습니다; dž처럼 숫자를 써야 합니다" |
| |
| #: glib/gmarkup.c:612 |
| msgid "" |
| "Character reference did not end with a semicolon; most likely you used an " |
| "ampersand character without intending to start an entity - escape ampersand " |
| "as &" |
| msgstr "" |
| "문자 참조가 세미콜론으로 끝나지 않습니다; 대부분의 경우 엔티티 시작에 사용하" |
| "려고 하지 않은 곳에서 & 기호를 사용한 경우일 것입니다 - 이런 경우 & 라고" |
| "쓰십시오" |
| |
| #: glib/gmarkup.c:638 |
| msgid "Unfinished entity reference" |
| msgstr "엔티티 참조가 미완성입니다" |
| |
| #: glib/gmarkup.c:644 |
| msgid "Unfinished character reference" |
| msgstr "문자 참조가 미완성입니다" |
| |
| #: glib/gmarkup.c:895 glib/gmarkup.c:923 glib/gmarkup.c:954 |
| msgid "Invalid UTF-8 encoded text" |
| msgstr "잘못된 UTF-8 인코딩된 텍스트" |
| |
| #: glib/gmarkup.c:990 |
| msgid "Document must begin with an element (e.g. <book>)" |
| msgstr "문서는 엘리먼트로 시작하여야 합니다 (예 <book>)" |
| |
| #: glib/gmarkup.c:1029 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following a '<' character; it may not begin an " |
| "element name" |
| msgstr "" |
| "'%s'은(는) '<' 문자 다음에 쓸 수 없습니다; 이 문자로는 엘리먼트 이름을 시작" |
| "할 수 없습니다" |
| |
| #: glib/gmarkup.c:1092 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '>' character to end the start tag of element " |
| "'%s'" |
| msgstr "" |
| "이상한 문자 '%s'. 엘리먼트 '%s'의 시작태그를 끝내는 '>'가 나타나야 합니다" |
| |
| #: glib/gmarkup.c:1180 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'" |
| msgstr "" |
| "이상한 문자 '%1$s'. 엘리먼트 '%3$s'의 애트리뷰트 이름 '%2$s' 다음에 '='이 나" |
| "타나야 합니다" |
| |
| #: glib/gmarkup.c:1221 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '>' or '/' character to end the start tag of " |
| "element '%s', or optionally an attribute; perhaps you used an invalid " |
| "character in an attribute name" |
| msgstr "" |
| "이상한 문자 '%s'. 엘리먼트 '%s'의 시작 태그를 끝내는 '>' 혹은 '/'가 나타나거" |
| "나, 애트리뷰트가 나와야 합니다; 아마도 애트리뷰트 이름에 잘못된 문자를 쓴 경" |
| "우일 것입니다" |
| |
| #: glib/gmarkup.c:1309 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected an open quote mark after the equals sign when " |
| "giving value for attribute '%s' of element '%s'" |
| msgstr "" |
| "이상한 문자 '%1$s'. 엘리먼트 '%3$s'의 애트리뷰트 '%2$s'의 값을 부여할 때 = " |
| "기호 다음에 따옴표가 나타나야 합니다" |
| |
| #: glib/gmarkup.c:1450 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following the characters '</'; '%s' may not " |
| "begin an element name" |
| msgstr "" |
| "'%s'은(는) '</' 다음에 쓸 수 있는 문자가 아닙니다; '%s'은(는) 엘리먼트 이름" |
| "을 시작할 수 없습니다" |
| |
| #: glib/gmarkup.c:1489 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following the close element name '%s'; the " |
| "allowed character is '>'" |
| msgstr "" |
| "'%s'은(는) 엘리먼트 '%s'을(를) 닫은 다음에 쓸 수 있는 문자가 아닙니다; '>' 문" |
| "자를 쓸 수 있습니다" |
| |
| #: glib/gmarkup.c:1500 |
| #, c-format |
| msgid "Element '%s' was closed, no element is currently open" |
| msgstr "'%s' 엘리먼트는 닫혔고, 현재 아무 엘리먼트도 열려 있지 않습니다" |
| |
| #: glib/gmarkup.c:1509 |
| #, c-format |
| msgid "Element '%s' was closed, but the currently open element is '%s'" |
| msgstr "'%s' 엘리먼트는 닫혔고, 현재 열려 있는 엘리먼트는 '%s'입니다" |
| |
| #: glib/gmarkup.c:1656 |
| msgid "Document was empty or contained only whitespace" |
| msgstr "문서가 비어있거나 공백문자만 포함하고 있습니다" |
| |
| #: glib/gmarkup.c:1670 |
| msgid "Document ended unexpectedly just after an open angle bracket '<'" |
| msgstr "'<' 바로 다음에 문서가 갑작스럽게 끝났습니다" |
| |
| #: glib/gmarkup.c:1678 glib/gmarkup.c:1722 |
| #, c-format |
| msgid "" |
| "Document ended unexpectedly with elements still open - '%s' was the last " |
| "element opened" |
| msgstr "" |
| "엘리먼트가 열려 있는 상태로 문서가 갑작스럽게 끝났습니다 - 마지막에 열려 있" |
| "던 엘리먼트는 '%s'입니다" |
| |
| #: glib/gmarkup.c:1686 |
| #, c-format |
| msgid "" |
| "Document ended unexpectedly, expected to see a close angle bracket ending " |
| "the tag <%s/>" |
| msgstr "" |
| "문서가 갑작스럽게 끝났습니다. <%s/> 태그를 끝내는 > 기호가 나타나야 합니다" |
| |
| #: glib/gmarkup.c:1692 |
| msgid "Document ended unexpectedly inside an element name" |
| msgstr "엘리먼트 이름에서 문서가 갑작스럽게 끝났습니다" |
| |
| #: glib/gmarkup.c:1697 |
| msgid "Document ended unexpectedly inside an attribute name" |
| msgstr "에트리뷰트 이름에서 문서가 갑작스럽게 끝났습니다" |
| |
| #: glib/gmarkup.c:1702 |
| msgid "Document ended unexpectedly inside an element-opening tag." |
| msgstr "엘리먼트의 열기 태그 안에서 문서가 갑작스럽게 끝났습니다." |
| |
| #: glib/gmarkup.c:1708 |
| msgid "" |
| "Document ended unexpectedly after the equals sign following an attribute " |
| "name; no attribute value" |
| msgstr "" |
| "애트리뷰트 이름 다음의 = 기호 다음에서 문서가 갑작스럽게 끝났습니다; 애트리뷰" |
| "트 값이 없습니다" |
| |
| #: glib/gmarkup.c:1715 |
| msgid "Document ended unexpectedly while inside an attribute value" |
| msgstr "애트리뷰트 값 안에서 문서가 갑작스럽게 끝났습니다" |
| |
| #: glib/gmarkup.c:1730 |
| #, c-format |
| msgid "Document ended unexpectedly inside the close tag for element '%s'" |
| msgstr "엘리먼트 '%s'의 닫기 태그 안에서 문서가 갑작스럽게 끝났습니다" |
| |
| # FIXME: processing instruction? |
| #: glib/gmarkup.c:1736 |
| msgid "Document ended unexpectedly inside a comment or processing instruction" |
| msgstr "주석문 혹은 처리 안내자 태그 안에서 문서가 갑작스럽게 끝났습니다" |
| |
| # g_shell_unquote()에 쓰임. shell의 quoted text를 raw string으로 바꾸는 기능 |
| # FIXME: "quoted"라는 말을 어떻게 해야 할 것인가? |
| #: glib/gshell.c:72 |
| msgid "Quoted text doesn't begin with a quotation mark" |
| msgstr "따옴표된 텍스트가 따옴표로 시작하지 않습니다" |
| |
| # FIXME: 위 참조, "quoted" |
| #: glib/gshell.c:162 |
| msgid "Unmatched quotation mark in command line or other shell-quoted text" |
| msgstr "명령행에서 따옴표가 맞지 않거나 쉘따옴표된 텍스트가 또 있습니다" |
| |
| #: glib/gshell.c:540 |
| #, c-format |
| msgid "Text ended just after a '\\' character. (The text was '%s')" |
| msgstr "텍스트가 '\\' 문자 다음에 끝났습니다. (텍스트는 '%s'입니다)" |
| |
| #: glib/gshell.c:547 |
| #, c-format |
| msgid "Text ended before matching quote was found for %c. (The text was '%s')" |
| msgstr "" |
| "텍스트가 %c에 대응되는 따옴표가 나타나기 전에 끝났습니다. (텍스트는 '%s'입니" |
| "다)" |
| |
| #: glib/gshell.c:559 |
| msgid "Text was empty (or contained only whitespace)" |
| msgstr "텍스트가 비어있음 (또는 공백만 포함됨)" |
| |
| #: glib/gspawn-win32.c:295 |
| msgid "Failed to read data from child process" |
| msgstr "자식 프로세스에서 데이터 읽기 실패" |
| |
| #: glib/gspawn-win32.c:424 |
| msgid "" |
| "Unexpected error in g_io_channel_win32_poll() reading data from a child " |
| "process" |
| msgstr "" |
| "자식 프로세스에서 데이터를 읽는중 g_io_channel_win32_poll()에서 기대되지않은 " |
| "오류" |
| |
| #: glib/gspawn-win32.c:850 glib/gspawn.c:1012 |
| #, c-format |
| msgid "Failed to read from child pipe (%s)" |
| msgstr "자식 파이프로 부터 읽기 실패 (%s)" |
| |
| #: glib/gspawn-win32.c:930 |
| msgid "Failed to execute helper program" |
| msgstr "도움 프로그램 실행 실패" |
| |
| #: glib/gspawn-win32.c:951 glib/gspawn-win32.c:995 |
| #, c-format |
| msgid "Failed to execute child process (%s)" |
| msgstr "자식 프로세스 실행 실패 (%s)" |
| |
| #: glib/gspawn-win32.c:986 glib/gspawn.c:1217 |
| #, c-format |
| msgid "Failed to change to directory '%s' (%s)" |
| msgstr "디렉토리 '%s'(으)로 바꾸기 실패 (%s)" |
| |
| #: glib/gspawn-win32.c:1040 glib/gspawn.c:1348 |
| #, c-format |
| msgid "Failed to create pipe for communicating with child process (%s)" |
| msgstr "자식 프로세스와 통신을 위한 파이프를 만드는 중 실패 (%s)" |
| |
| #: glib/gspawn.c:178 |
| #, c-format |
| msgid "Failed to read data from child process (%s)" |
| msgstr "자식 프로세스 에서 데이터를 읽기 실패 (%s)" |
| |
| #: glib/gspawn.c:309 |
| #, c-format |
| msgid "Unexpected error in select() reading data from a child process (%s)" |
| msgstr "" |
| "자식 프로세스 에서 데이터를 읽는 중 select()에서 예상되지 않은 오류 (%s)" |
| |
| #: glib/gspawn.c:392 |
| #, c-format |
| msgid "Unexpected error in waitpid() (%s)" |
| msgstr "waitpid()에서 예상되지 않은 오류 (%s)" |
| |
| #: glib/gspawn.c:1077 |
| #, c-format |
| msgid "Failed to fork (%s)" |
| msgstr "포크 실패(%s)" |
| |
| #: glib/gspawn.c:1227 |
| #, c-format |
| msgid "Failed to execute child process \"%s\" (%s)" |
| msgstr "자식 프로세스 \"%s\"을(를) 실행하기 실패 (%s)" |
| |
| #: glib/gspawn.c:1237 |
| #, c-format |
| msgid "Failed to redirect output or input of child process (%s)" |
| msgstr "자식 프로세스 (%s)의 입력 또는 출력의 리다이렉트 실패" |
| |
| #: glib/gspawn.c:1246 |
| #, c-format |
| msgid "Failed to fork child process (%s)" |
| msgstr "자식 프로세스 (%s)를 생성 실패" |
| |
| #: glib/gspawn.c:1254 |
| #, c-format |
| msgid "Unknown error executing child process \"%s\"" |
| msgstr "자식 프로세스 \"%s\"을(를) 실행하는 중 알 수 없는 오류" |
| |
| #: glib/gspawn.c:1276 |
| #, c-format |
| msgid "Failed to read enough data from child pid pipe (%s)" |
| msgstr "자식 pid 파이프에서 필요한 데이타를 읽는 데 실패했습니다 (%s)" |
| |
| #: glib/gutf8.c:985 |
| msgid "Character out of range for UTF-8" |
| msgstr "UTF-8 범위 밖의 문자" |
| |
| #: glib/gutf8.c:1074 glib/gutf8.c:1083 glib/gutf8.c:1215 glib/gutf8.c:1224 |
| #: glib/gutf8.c:1365 glib/gutf8.c:1461 |
| msgid "Invalid sequence in conversion input" |
| msgstr "변환 입력에서 잘못된 순서" |
| |
| #: glib/gutf8.c:1376 glib/gutf8.c:1472 |
| msgid "Character out of range for UTF-16" |
| msgstr "UTF-16 범위 밖의 문자" |