| # Traditional Chinese translation for glib 2.x |
| # Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. |
| # Abel Cheung <abel@oaka.org>, 2001-2003. |
| # Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>, 2005. |
| # |
| # |
| msgid "" |
| msgstr "" |
| "Project-Id-Version: glib 2.9.0\n" |
| "Report-Msgid-Bugs-To: \n" |
| "POT-Creation-Date: 2005-12-09 12:42-0500\n" |
| "PO-Revision-Date: 2005-10-17 08:43+0800\n" |
| "Last-Translator: Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>\n" |
| "Language-Team: Chinese/Traditional <community@linuxhall.org>\n" |
| "MIME-Version: 1.0\n" |
| "Content-Type: text/plain; charset=UTF-8\n" |
| "Content-Transfer-Encoding: 8bit\n" |
| |
| #: glib/gconvert.c:408 glib/gconvert.c:486 glib/giochannel.c:1150 |
| #, c-format |
| msgid "Conversion from character set '%s' to '%s' is not supported" |
| msgstr "不支援將字元集‘%s’轉換成‘%s’" |
| |
| #: glib/gconvert.c:412 glib/gconvert.c:490 |
| #, c-format |
| msgid "Could not open converter from '%s' to '%s'" |
| msgstr "無法將‘%s’轉換至‘%s’" |
| |
| #: glib/gconvert.c:606 glib/gconvert.c:995 glib/giochannel.c:1322 |
| #: glib/giochannel.c:1364 glib/giochannel.c:2206 glib/gutf8.c:943 |
| #: glib/gutf8.c:1392 |
| #, c-format |
| msgid "Invalid byte sequence in conversion input" |
| msgstr "轉換輸入資料時遇到不正確的位元組次序" |
| |
| #: glib/gconvert.c:612 glib/gconvert.c:922 glib/giochannel.c:1329 |
| #: glib/giochannel.c:2218 |
| #, c-format |
| msgid "Error during conversion: %s" |
| msgstr "轉換時發生錯誤：%s" |
| |
| #: glib/gconvert.c:647 glib/gutf8.c:939 glib/gutf8.c:1143 glib/gutf8.c:1284 |
| #: glib/gutf8.c:1388 |
| #, c-format |
| msgid "Partial character sequence at end of input" |
| msgstr "輸入資料結束時出現未完成的字元次序" |
| |
| #: glib/gconvert.c:897 |
| #, c-format |
| msgid "Cannot convert fallback '%s' to codeset '%s'" |
| msgstr "無法將後備字串‘%s’的字元集轉換成‘%s’" |
| |
| #: glib/gconvert.c:1706 |
| #, c-format |
| msgid "The URI '%s' is not an absolute URI using the \"file\" scheme" |
| msgstr "URI‘%s’不是使用“file”格式的絕對 URI" |
| |
| #: glib/gconvert.c:1716 |
| #, c-format |
| msgid "The local file URI '%s' may not include a '#'" |
| msgstr "本機檔案的 URI‘%s’不應含有‘#’" |
| |
| #: glib/gconvert.c:1733 |
| #, c-format |
| msgid "The URI '%s' is invalid" |
| msgstr "URI‘%s’無效" |
| |
| #: glib/gconvert.c:1745 |
| #, c-format |
| msgid "The hostname of the URI '%s' is invalid" |
| msgstr "URI‘%s’中的主機名稱無效" |
| |
| #: glib/gconvert.c:1761 |
| #, c-format |
| msgid "The URI '%s' contains invalidly escaped characters" |
| msgstr "URI‘%s’含有「不正確跳出」的字元" |
| |
| #: glib/gconvert.c:1855 |
| #, c-format |
| msgid "The pathname '%s' is not an absolute path" |
| msgstr "路徑名稱‘%s’不是絕對路徑" |
| |
| #: glib/gconvert.c:1865 |
| #, c-format |
| msgid "Invalid hostname" |
| msgstr "主機名稱無效" |
| |
| #: glib/gdir.c:121 glib/gdir.c:141 |
| #, c-format |
| msgid "Error opening directory '%s': %s" |
| msgstr "開啟目錄‘%s’時發生錯誤：%s" |
| |
| #: glib/gfileutils.c:576 glib/gfileutils.c:649 |
| #, c-format |
| msgid "Could not allocate %lu bytes to read file \"%s\"" |
| msgstr "無法配置 %lu 位元來讀取檔案“%s”" |
| |
| #: glib/gfileutils.c:591 |
| #, c-format |
| msgid "Error reading file '%s': %s" |
| msgstr "讀取檔案‘%s’時發生錯誤：%s" |
| |
| #: glib/gfileutils.c:673 |
| #, c-format |
| msgid "Failed to read from file '%s': %s" |
| msgstr "讀取檔案‘%s’失敗：%s" |
| |
| #: glib/gfileutils.c:724 glib/gfileutils.c:811 |
| #, c-format |
| msgid "Failed to open file '%s': %s" |
| msgstr "開啟檔案‘%s’失敗：%s" |
| |
| #: glib/gfileutils.c:741 glib/gmappedfile.c:133 |
| #, c-format |
| msgid "Failed to get attributes of file '%s': fstat() failed: %s" |
| msgstr "獲取檔案‘%s’的屬性失敗：fstat() 失敗：%s" |
| |
| #: glib/gfileutils.c:775 |
| #, c-format |
| msgid "Failed to open file '%s': fdopen() failed: %s" |
| msgstr "開啟檔案‘%s’失敗：fdopen() 失敗：%s" |
| |
| #: glib/gfileutils.c:909 |
| #, c-format |
| msgid "Failed to rename file '%s' to '%s': g_rename() failed: %s" |
| msgstr "檔案名稱由‘%s’改為‘%s’失敗：g_rename() 失敗：%s" |
| |
| #: glib/gfileutils.c:950 glib/gfileutils.c:1415 |
| #, c-format |
| msgid "Failed to create file '%s': %s" |
| msgstr "建立檔案‘%s’失敗：%s" |
| |
| #: glib/gfileutils.c:964 |
| #, c-format |
| msgid "Failed to open file '%s' for writing: fdopen() failed: %s" |
| msgstr "開啟檔案‘%s’作寫入失敗：fdopen() 失敗：%s" |
| |
| #: glib/gfileutils.c:989 |
| #, c-format |
| msgid "Failed to write file '%s': fwrite() failed: %s" |
| msgstr "寫入檔案‘%s’失敗：fwrite() 失敗：%s" |
| |
| #: glib/gfileutils.c:1008 |
| #, c-format |
| msgid "Failed to close file '%s': fclose() failed: %s" |
| msgstr "關閉檔案‘%s’失敗：fclose() 失敗：%s" |
| |
| #: glib/gfileutils.c:1126 |
| #, c-format |
| msgid "Existing file '%s' could not be removed: g_unlink() failed: %s" |
| msgstr "現存檔案‘%s’無法移除：g_unlink() 失敗：%s" |
| |
| #: glib/gfileutils.c:1376 |
| #, c-format |
| msgid "Template '%s' invalid, should not contain a '%s'" |
| msgstr "樣式‘%s’無效，不應含有‘%s’" |
| |
| #: glib/gfileutils.c:1390 |
| #, c-format |
| msgid "Template '%s' doesn't end with XXXXXX" |
| msgstr "樣式‘%s’末端不是 XXXXXX" |
| |
| #: glib/gfileutils.c:1865 |
| #, c-format |
| msgid "Failed to read the symbolic link '%s': %s" |
| msgstr "讀取符號連結‘%s’失敗：%s" |
| |
| #: glib/gfileutils.c:1886 |
| #, c-format |
| msgid "Symbolic links not supported" |
| msgstr "不支援符號連結" |
| |
| #: glib/giochannel.c:1154 |
| #, c-format |
| msgid "Could not open converter from '%s' to '%s': %s" |
| msgstr "無法開啟將‘%s’轉換至‘%s’的轉換器：%s" |
| |
| #: glib/giochannel.c:1499 |
| #, c-format |
| msgid "Can't do a raw read in g_io_channel_read_line_string" |
| msgstr "在 g_io_channel_read_line_string 中無法讀取原始資料" |
| |
| #: glib/giochannel.c:1546 glib/giochannel.c:1803 glib/giochannel.c:1889 |
| #, c-format |
| msgid "Leftover unconverted data in read buffer" |
| msgstr "用來讀取資料的緩衝區中仍有未轉換的資料" |
| |
| #: glib/giochannel.c:1626 glib/giochannel.c:1703 |
| #, c-format |
| msgid "Channel terminates in a partial character" |
| msgstr "在字元未完整之前，輸入管道已經結束" |
| |
| #: glib/giochannel.c:1689 |
| #, c-format |
| msgid "Can't do a raw read in g_io_channel_read_to_end" |
| msgstr "g_io_channel_read_to_end 中無法讀取原始資料" |
| |
| #: glib/gmappedfile.c:116 |
| #, c-format |
| msgid "Failed to open file '%s': open() failed: %s" |
| msgstr "開啟檔案‘%s’失敗：open() 失敗：%s" |
| |
| #: glib/gmappedfile.c:193 |
| #, c-format |
| msgid "Failed to map file '%s': mmap() failed: %s" |
| msgstr "對應檔案‘%s’失敗：mmap() 失敗：%s" |
| |
| #: glib/gmarkup.c:232 |
| #, c-format |
| msgid "Error on line %d char %d: %s" |
| msgstr "第 %d 行第 %d 個字發生錯誤：%s" |
| |
| #: glib/gmarkup.c:330 |
| #, c-format |
| msgid "Error on line %d: %s" |
| msgstr "第 %d 行發生錯誤：%s" |
| |
| #: glib/gmarkup.c:434 |
| msgid "" |
| "Empty entity '&;' seen; valid entities are: & " < > '" |
| msgstr "出現空白的實體‘&;’；可用的實體為：& " < > '" |
| |
| #: glib/gmarkup.c:444 |
| #, c-format |
| msgid "" |
| "Character '%s' is not valid at the start of an entity name; the & character " |
| "begins an entity; if this ampersand isn't supposed to be an entity, escape " |
| "it as &" |
| msgstr "" |
| "實體名稱不應以‘%s’開始，應該使用 & 字元；如果這個 & 字元不是作為實體使用，請" |
| "將 & 轉換為 &" |
| |
| #: glib/gmarkup.c:478 |
| #, c-format |
| msgid "Character '%s' is not valid inside an entity name" |
| msgstr "實體名稱中不應含有字元‘%s’" |
| |
| #: glib/gmarkup.c:515 |
| #, c-format |
| msgid "Entity name '%s' is not known" |
| msgstr "實體名稱‘%s’意義不明" |
| |
| #: glib/gmarkup.c:526 |
| msgid "" |
| "Entity did not end with a semicolon; most likely you used an ampersand " |
| "character without intending to start an entity - escape ampersand as &" |
| msgstr "" |
| "實體的結束部分不是分號；很可能您想使用 & 字元但未將它變為實體 ─ 請將 & 轉換" |
| "為 &" |
| |
| #: glib/gmarkup.c:579 |
| #, c-format |
| msgid "" |
| "Failed to parse '%-.*s', which should have been a digit inside a character " |
| "reference (ê for example) - perhaps the digit is too large" |
| msgstr "無法解析‘%-.*s’，字元參引內應該含有數字（例如 ê）─ 可能是數字太大" |
| |
| #: glib/gmarkup.c:604 |
| #, c-format |
| msgid "Character reference '%-.*s' does not encode a permitted character" |
| msgstr "字元參引‘%-.*s’含有不允許的編碼的字元" |
| |
| #: glib/gmarkup.c:619 |
| msgid "Empty character reference; should include a digit such as dž" |
| msgstr "字元參引是空白的；它應該包括數字，像 dž" |
| |
| #: glib/gmarkup.c:629 |
| msgid "" |
| "Character reference did not end with a semicolon; most likely you used an " |
| "ampersand character without intending to start an entity - escape ampersand " |
| "as &" |
| msgstr "" |
| "字元參引的結束部分不是分號；很可能您想使用 & 字元但未將它變為實體 ─ 請將 & 轉" |
| "換為 &" |
| |
| #: glib/gmarkup.c:715 |
| msgid "Unfinished entity reference" |
| msgstr "未完成的實體參引" |
| |
| #: glib/gmarkup.c:721 |
| msgid "Unfinished character reference" |
| msgstr "未完成的字元參引" |
| |
| #: glib/gmarkup.c:964 glib/gmarkup.c:992 glib/gmarkup.c:1023 |
| msgid "Invalid UTF-8 encoded text" |
| msgstr "無效的 UTF-8 編碼文字" |
| |
| #: glib/gmarkup.c:1059 |
| msgid "Document must begin with an element (e.g. <book>)" |
| msgstr "文件開始必須為一元素（例如 <book>）" |
| |
| #: glib/gmarkup.c:1099 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following a '<' character; it may not begin an " |
| "element name" |
| msgstr "‘<’字元後的‘%s’不是有效的字元；這樣不可能是元素名稱的開始部份" |
| |
| #: glib/gmarkup.c:1163 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '>' character to end the start tag of element " |
| "'%s'" |
| msgstr "字元‘%s’不尋常，元素‘%s’的開始標籤應該以‘>’字元結束" |
| |
| #: glib/gmarkup.c:1252 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'" |
| msgstr "不尋常的字元‘%s’，屬性名稱‘%s’（屬於元素‘%s’）後應該是‘=’字元" |
| |
| #: glib/gmarkup.c:1294 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '>' or '/' character to end the start tag of " |
| "element '%s', or optionally an attribute; perhaps you used an invalid " |
| "character in an attribute name" |
| msgstr "" |
| "不尋常的字元‘%s’，元素‘%s’的開始標籤應該以‘>’或‘/’字元終結，也可以是屬性；或" |
| "許您在屬性名稱中使用了無效的字元" |
| |
| #: glib/gmarkup.c:1383 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected an open quote mark after the equals sign when " |
| "giving value for attribute '%s' of element '%s'" |
| msgstr "" |
| "不尋常的字元‘%s’，當指定屬性‘%s’的值（屬於元素‘%s’）時，等號後應該出現開引號" |
| |
| #: glib/gmarkup.c:1528 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following the characters '</'; '%s' may not " |
| "begin an element name" |
| msgstr "‘</’字元後的‘%s’不是有效的字元；‘%s’不可能是元素名稱的開始部份" |
| |
| #: glib/gmarkup.c:1568 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following the close element name '%s'; the " |
| "allowed character is '>'" |
| msgstr "字元‘%s’是無效的（位置在關閉元素‘%s’末端）；允許的字元為‘>’" |
| |
| #: glib/gmarkup.c:1579 |
| #, c-format |
| msgid "Element '%s' was closed, no element is currently open" |
| msgstr "元素‘%s’已關閉，沒有開啟中的元素" |
| |
| #: glib/gmarkup.c:1588 |
| #, c-format |
| msgid "Element '%s' was closed, but the currently open element is '%s'" |
| msgstr "元素‘%s’已關閉，但開啟中的元素是‘%s’" |
| |
| #: glib/gmarkup.c:1735 |
| msgid "Document was empty or contained only whitespace" |
| msgstr "文件完全空白或只含有空白字元" |
| |
| #: glib/gmarkup.c:1749 |
| msgid "Document ended unexpectedly just after an open angle bracket '<'" |
| msgstr "文件在尖角括號‘<’後突然終止" |
| |
| #: glib/gmarkup.c:1757 glib/gmarkup.c:1801 |
| #, c-format |
| msgid "" |
| "Document ended unexpectedly with elements still open - '%s' was the last " |
| "element opened" |
| msgstr "在仍然有開啟中的元素時，文件突然結束 ─‘%s’是最後一個開啟的元素" |
| |
| #: glib/gmarkup.c:1765 |
| #, c-format |
| msgid "" |
| "Document ended unexpectedly, expected to see a close angle bracket ending " |
| "the tag <%s/>" |
| msgstr "文件突然結束，本來應該出現用來關閉標籤 <%s/> 的尖角括號" |
| |
| #: glib/gmarkup.c:1771 |
| msgid "Document ended unexpectedly inside an element name" |
| msgstr "在元素的名稱內，文件突然結束" |
| |
| #: glib/gmarkup.c:1776 |
| msgid "Document ended unexpectedly inside an attribute name" |
| msgstr "在屬性名稱內，文件突然結束" |
| |
| #: glib/gmarkup.c:1781 |
| msgid "Document ended unexpectedly inside an element-opening tag." |
| msgstr "在元素的開啟標籤內，文件突然結束" |
| |
| #: glib/gmarkup.c:1787 |
| msgid "" |
| "Document ended unexpectedly after the equals sign following an attribute " |
| "name; no attribute value" |
| msgstr "在屬性名稱的等號後，文件突然結束；沒有屬性值" |
| |
| #: glib/gmarkup.c:1794 |
| msgid "Document ended unexpectedly while inside an attribute value" |
| msgstr "在屬性值內，文件突然結束" |
| |
| #: glib/gmarkup.c:1809 |
| #, c-format |
| msgid "Document ended unexpectedly inside the close tag for element '%s'" |
| msgstr "在元素‘%s’的關閉標籤內，文件突然結束" |
| |
| #: glib/gmarkup.c:1815 |
| msgid "Document ended unexpectedly inside a comment or processing instruction" |
| msgstr "在註解或處理指示內，文件突然結束" |
| |
| #: glib/gshell.c:73 |
| #, c-format |
| msgid "Quoted text doesn't begin with a quotation mark" |
| msgstr "應該用引號括起來的文字不是以括號為開始" |
| |
| #: glib/gshell.c:163 |
| #, c-format |
| msgid "Unmatched quotation mark in command line or other shell-quoted text" |
| msgstr "指令列或其它標為指令的字串內有不對稱的引號" |
| |
| #: glib/gshell.c:541 |
| #, c-format |
| msgid "Text ended just after a '\\' character. (The text was '%s')" |
| msgstr "文字在‘\\’字元後就終止了。（文字為‘%s’）" |
| |
| #: glib/gshell.c:548 |
| #, c-format |
| msgid "Text ended before matching quote was found for %c. (The text was '%s')" |
| msgstr "字串完結前仍沒有對應於 %c 的引號（字串為‘%s’）" |
| |
| #: glib/gshell.c:560 |
| #, c-format |
| msgid "Text was empty (or contained only whitespace)" |
| msgstr "文字是空白的（或只含有空白字元）" |
| |
| #: glib/gspawn-win32.c:276 |
| #, c-format |
| msgid "Failed to read data from child process" |
| msgstr "無法從副進程讀取資料" |
| |
| #: glib/gspawn-win32.c:291 glib/gspawn.c:1364 |
| #, c-format |
| msgid "Failed to create pipe for communicating with child process (%s)" |
| msgstr "無法建立管道來和副進程溝通 (%s)" |
| |
| #: glib/gspawn-win32.c:329 glib/gspawn.c:1028 |
| #, c-format |
| msgid "Failed to read from child pipe (%s)" |
| msgstr "無法從管道讀取資料 (%s)" |
| |
| #: glib/gspawn-win32.c:355 glib/gspawn.c:1233 |
| #, c-format |
| msgid "Failed to change to directory '%s' (%s)" |
| msgstr "無法進入目錄‘%s’(%s)" |
| |
| #: glib/gspawn-win32.c:361 glib/gspawn-win32.c:581 |
| #, c-format |
| msgid "Failed to execute child process (%s)" |
| msgstr "無法執行副進程 (%s)" |
| |
| #: glib/gspawn-win32.c:471 glib/gspawn-win32.c:527 |
| #, c-format |
| msgid "Invalid program name: %s" |
| msgstr "程式名稱無效：%s" |
| |
| #: glib/gspawn-win32.c:481 glib/gspawn-win32.c:537 glib/gspawn-win32.c:780 |
| #: glib/gspawn-win32.c:835 glib/gspawn-win32.c:1364 |
| #, c-format |
| msgid "Invalid string in argument vector at %d: %s" |
| msgstr "引數中含無效的字串 %d：%s" |
| |
| #: glib/gspawn-win32.c:492 glib/gspawn-win32.c:548 glib/gspawn-win32.c:794 |
| #: glib/gspawn-win32.c:848 glib/gspawn-win32.c:1397 |
| #, c-format |
| msgid "Invalid string in environment: %s" |
| msgstr "環境變數中的無效字串：%s" |
| |
| #: glib/gspawn-win32.c:776 glib/gspawn-win32.c:831 glib/gspawn-win32.c:1345 |
| #, c-format |
| msgid "Invalid working directory: %s" |
| msgstr "無效的工作目錄：%s" |
| |
| #: glib/gspawn-win32.c:890 |
| #, c-format |
| msgid "Failed to execute helper program (%s)" |
| msgstr "無法執行協助程式 (%s)" |
| |
| #: glib/gspawn-win32.c:1084 |
| #, c-format |
| msgid "" |
| "Unexpected error in g_io_channel_win32_poll() reading data from a child " |
| "process" |
| msgstr "當 g_io_channel_win32_poll() 從副進程讀取資料時發生無法預計的錯誤" |
| |
| #: glib/gspawn.c:168 |
| #, c-format |
| msgid "Failed to read data from child process (%s)" |
| msgstr "無法從副進程讀取資料 (%s)" |
| |
| #: glib/gspawn.c:300 |
| #, c-format |
| msgid "Unexpected error in select() reading data from a child process (%s)" |
| msgstr "當 select() 從副進程讀取資料時發生無法預計的錯誤 (%s)" |
| |
| #: glib/gspawn.c:383 |
| #, c-format |
| msgid "Unexpected error in waitpid() (%s)" |
| msgstr "waitpid() 發生無法預計的錯誤 (%s)" |
| |
| #: glib/gspawn.c:1093 |
| #, c-format |
| msgid "Failed to fork (%s)" |
| msgstr "無法衍生進程 (%s)" |
| |
| #: glib/gspawn.c:1243 |
| #, c-format |
| msgid "Failed to execute child process \"%s\" (%s)" |
| msgstr "無法執行副進程“%s”(%s)" |
| |
| #: glib/gspawn.c:1253 |
| #, c-format |
| msgid "Failed to redirect output or input of child process (%s)" |
| msgstr "無法將副進程的輸出或輸入重新導向 (%s)" |
| |
| #: glib/gspawn.c:1262 |
| #, c-format |
| msgid "Failed to fork child process (%s)" |
| msgstr "無法衍生副進程 (%s)" |
| |
| #: glib/gspawn.c:1270 |
| #, c-format |
| msgid "Unknown error executing child process \"%s\"" |
| msgstr "執行副進程“%s”時發生不明的錯誤" |
| |
| #: glib/gspawn.c:1292 |
| #, c-format |
| msgid "Failed to read enough data from child pid pipe (%s)" |
| msgstr "無法從 child pid pipe 讀取足夠的資料 (%s)" |
| |
| #: glib/gutf8.c:1017 |
| #, c-format |
| msgid "Character out of range for UTF-8" |
| msgstr "字元不在 UTF-8 範圍之內" |
| |
| #: glib/gutf8.c:1111 glib/gutf8.c:1120 glib/gutf8.c:1252 glib/gutf8.c:1261 |
| #: glib/gutf8.c:1402 glib/gutf8.c:1498 |
| #, c-format |
| msgid "Invalid sequence in conversion input" |
| msgstr "轉換輸入資料時出現無效的字元次序" |
| |
| #: glib/gutf8.c:1413 glib/gutf8.c:1509 |
| #, c-format |
| msgid "Character out of range for UTF-16" |
| msgstr "字元不在 UTF-16 範圍之內" |
| |
| #: glib/goption.c:468 |
| msgid "Usage:" |
| msgstr "用法：" |
| |
| #: glib/goption.c:468 |
| msgid "[OPTION...]" |
| msgstr "[選項...]" |
| |
| #: glib/goption.c:556 |
| msgid "Help Options:" |
| msgstr "說明選項：" |
| |
| #: glib/goption.c:557 |
| msgid "Show help options" |
| msgstr "顯示說明的選項" |
| |
| #: glib/goption.c:562 |
| msgid "Show all help options" |
| msgstr "顯示所有的說明選項" |
| |
| #: glib/goption.c:612 |
| msgid "Application Options:" |
| msgstr "應用程式選項：" |
| |
| #: glib/goption.c:653 |
| #, c-format |
| msgid "Cannot parse integer value '%s' for %s" |
| msgstr "無法給 %2$s 解析整數值‘%1$s’" |
| |
| #: glib/goption.c:663 |
| #, c-format |
| msgid "Integer value '%s' for %s out of range" |
| msgstr "%2$s 的整數值‘%1$s’超出範圍" |
| |
| #: glib/goption.c:957 glib/goption.c:1068 |
| #, c-format |
| msgid "Missing argument for %s" |
| msgstr "缺少 %s 的參數" |
| |
| #: glib/goption.c:1472 |
| #, c-format |
| msgid "Unknown option %s" |
| msgstr "未知的選項 %s" |
| |
| #: glib/gkeyfile.c:339 |
| #, c-format |
| msgid "Valid key file could not be found in data dirs" |
| msgstr "在資料目錄中找不到有效的設定鍵檔案" |
| |
| #: glib/gkeyfile.c:374 |
| #, c-format |
| msgid "Not a regular file" |
| msgstr "不是正規的檔案" |
| |
| #: glib/gkeyfile.c:382 |
| #, c-format |
| msgid "File is empty" |
| msgstr "檔案是空的" |
| |
| #: glib/gkeyfile.c:697 |
| #, c-format |
| msgid "" |
| "Key file contains line '%s' which is not a key-value pair, group, or comment" |
| msgstr "設定鍵檔案中‘%s’行並非設定鍵值配對、群組或註解" |
| |
| #: glib/gkeyfile.c:765 |
| #, c-format |
| msgid "Key file does not start with a group" |
| msgstr "設定鍵檔案並非以群組開頭" |
| |
| #: glib/gkeyfile.c:808 |
| #, c-format |
| msgid "Key file contains unsupported encoding '%s'" |
| msgstr "設定鍵檔案包含不支援的編碼‘%s’" |
| |
| #: glib/gkeyfile.c:1017 glib/gkeyfile.c:1176 glib/gkeyfile.c:2177 |
| #: glib/gkeyfile.c:2242 glib/gkeyfile.c:2361 glib/gkeyfile.c:2497 |
| #: glib/gkeyfile.c:2649 glib/gkeyfile.c:2823 glib/gkeyfile.c:2880 |
| #, c-format |
| msgid "Key file does not have group '%s'" |
| msgstr "設定鍵檔案沒有群組‘%s’" |
| |
| #: glib/gkeyfile.c:1188 |
| #, c-format |
| msgid "Key file does not have key '%s'" |
| msgstr "設定鍵檔案沒有設定鍵‘%s’" |
| |
| #: glib/gkeyfile.c:1289 glib/gkeyfile.c:1398 |
| #, c-format |
| msgid "Key file contains key '%s' with value '%s' which is not UTF-8" |
| msgstr "設定鍵檔案包含的設定鍵‘%s’（數值為‘%s’）並非 UTF-8" |
| |
| #: glib/gkeyfile.c:1307 glib/gkeyfile.c:1416 glib/gkeyfile.c:1788 |
| #, c-format |
| msgid "Key file contains key '%s' which has value that cannot be interpreted." |
| msgstr "設定鍵檔案包含的設定鍵‘%s’的數值無法解譯。" |
| |
| #: glib/gkeyfile.c:2004 |
| #, c-format |
| msgid "" |
| "Key file contains key '%s' in group '%s' which has value that cannot be " |
| "interpreted." |
| msgstr "設定鍵檔案包含的群組‘%2$s’中設定鍵‘%1$s’數值無法解譯" |
| |
| #: glib/gkeyfile.c:2192 glib/gkeyfile.c:2376 glib/gkeyfile.c:2891 |
| #, c-format |
| msgid "Key file does not have key '%s' in group '%s'" |
| msgstr "設定鍵檔案的群組‘%2$s’中沒有設定鍵‘%1$s’" |
| |
| #: glib/gkeyfile.c:3067 |
| #, c-format |
| msgid "Key file contains escape character at end of line" |
| msgstr "設定鍵檔案在行尾包含跳出字元" |
| |
| #: glib/gkeyfile.c:3089 |
| #, c-format |
| msgid "Key file contains invalid escape sequence '%s'" |
| msgstr "設定鍵檔案含有不正確的「跳出字元」‘%s’" |
| |
| #: glib/gkeyfile.c:3230 |
| #, c-format |
| msgid "Value '%s' cannot be interpreted as a number." |
| msgstr "數值‘%s’不能被解譯為數字。" |
| |
| #: glib/gkeyfile.c:3240 |
| #, c-format |
| msgid "Integer value '%s' out of range" |
| msgstr "整數值‘%s’超出範圍" |
| |
| #: glib/gkeyfile.c:3270 |
| #, c-format |
| msgid "Value '%s' cannot be interpreted as a boolean." |
| msgstr "數值‘%s’不能被解譯為布林值。" |
| |
| #~ msgid "Could not change file mode: fork() failed: %s" |
| #~ msgstr "無法更改檔案模式：fork() 失敗：%s" |
| |
| #~ msgid "Could not change file mode: waitpid() failed: %s" |
| #~ msgstr "無法更改檔案模式：waitpid() 失敗：%s" |
| |
| #~ msgid "Could not change file mode: chmod() failed: %s" |
| #~ msgstr "無法更改檔案模式：chmod() 失敗：%s" |
| |
| #~ msgid "Could not change file mode: Child terminated by signal: %s" |
| #~ msgstr "無法更改檔案模式：子程序被訊息中止，訊息：%s" |
| |
| #~ msgid "Could not change file mode: Child terminated abnormally" |
| #~ msgstr "無法更改檔案模式：子程序不正常地被中止" |
