| # Chinese (Hong Kong) translation for glib 2.x |
| # Copyright (C) 2001, 02, 03, 05, 07 Free Software Foundation, Inc. |
| # XML glossary from http://xml.ascc.net/zh/big5/gloss.html |
| # Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>, 2005. |
| # Abel Cheung <abel@oaka.org>, 2001-2003, 2005. |
| # Woodman Tuen <wmtuen@gmail.com>, 2005-07. |
| # |
| # |
| msgid "" |
| msgstr "" |
| "Project-Id-Version: glib 2.12.2\n" |
| "Report-Msgid-Bugs-To: \n" |
| "POT-Creation-Date: 2007-11-24 11:31-0500\n" |
| "PO-Revision-Date: 2007-02-28 02:10+0800\n" |
| "Last-Translator: Woodman Tuen <wmtuen@gmail.com>\n" |
| "Language-Team: Chinese (Hong Kong) <community@linuxhall.org>\n" |
| "MIME-Version: 1.0\n" |
| "Content-Type: text/plain; charset=UTF-8\n" |
| "Content-Transfer-Encoding: 8bit\n" |
| |
| #: glib/gbookmarkfile.c:705 glib/gbookmarkfile.c:782 glib/gbookmarkfile.c:861 |
| #: glib/gbookmarkfile.c:908 |
| #, c-format |
| msgid "Unexpected attribute '%s' for element '%s'" |
| msgstr "元素‘%2$s’中的不明屬性‘%1$s’" |
| |
| #: glib/gbookmarkfile.c:716 glib/gbookmarkfile.c:793 glib/gbookmarkfile.c:803 |
| #: glib/gbookmarkfile.c:919 |
| #, c-format |
| msgid "Attribute '%s' of element '%s' not found" |
| msgstr "找不到元素‘%2$s’的屬性‘%1$s’" |
| |
| #: glib/gbookmarkfile.c:1092 glib/gbookmarkfile.c:1157 |
| #: glib/gbookmarkfile.c:1221 glib/gbookmarkfile.c:1231 |
| #, c-format |
| msgid "Unexpected tag '%s', tag '%s' expected" |
| msgstr "不明的標籤‘%s’，應為標籤‘%s’" |
| |
| #: glib/gbookmarkfile.c:1117 glib/gbookmarkfile.c:1131 |
| #: glib/gbookmarkfile.c:1199 glib/gbookmarkfile.c:1251 |
| #, c-format |
| msgid "Unexpected tag '%s' inside '%s'" |
| msgstr "‘%2$s’中有不明的標籤‘%1$s’" |
| |
| #: glib/gbookmarkfile.c:1781 |
| #, c-format |
| msgid "No valid bookmark file found in data dirs" |
| msgstr "在資料目錄中找不到有效的書籤檔案" |
| |
| #: glib/gbookmarkfile.c:1982 |
| #, c-format |
| msgid "A bookmark for URI '%s' already exists" |
| msgstr "URI‘%s’的書籤已經存在" |
| |
| #: glib/gbookmarkfile.c:2028 glib/gbookmarkfile.c:2185 |
| #: glib/gbookmarkfile.c:2270 glib/gbookmarkfile.c:2350 |
| #: glib/gbookmarkfile.c:2435 glib/gbookmarkfile.c:2518 |
| #: glib/gbookmarkfile.c:2596 glib/gbookmarkfile.c:2675 |
| #: glib/gbookmarkfile.c:2717 glib/gbookmarkfile.c:2814 |
| #: glib/gbookmarkfile.c:2940 glib/gbookmarkfile.c:3130 |
| #: glib/gbookmarkfile.c:3206 glib/gbookmarkfile.c:3371 |
| #: glib/gbookmarkfile.c:3460 glib/gbookmarkfile.c:3550 |
| #: glib/gbookmarkfile.c:3677 |
| #, c-format |
| msgid "No bookmark found for URI '%s'" |
| msgstr "找不到 URI‘%s’的書籤" |
| |
| #: glib/gbookmarkfile.c:2359 |
| #, c-format |
| msgid "No MIME type defined in the bookmark for URI '%s'" |
| msgstr "URI‘%s’的書籤中沒有定義 MIME 類型" |
| |
| #: glib/gbookmarkfile.c:2444 |
| #, c-format |
| msgid "No private flag has been defined in bookmark for URI '%s'" |
| msgstr "URI‘%s’的書籤中沒有定義 private flag" |
| |
| #: glib/gbookmarkfile.c:2823 |
| #, c-format |
| msgid "No groups set in bookmark for URI '%s'" |
| msgstr "URI‘%s’的書籤中並沒有設定羣組" |
| |
| #: glib/gbookmarkfile.c:3224 glib/gbookmarkfile.c:3381 |
| #, c-format |
| msgid "No application with name '%s' registered a bookmark for '%s'" |
| msgstr "沒有一個名為‘%s’的應用程式註冊一個書籤給‘%s’" |
| |
| #: glib/gbookmarkfile.c:3404 |
| #, c-format |
| msgid "Failed to expand exec line '%s' with URI '%s'" |
| msgstr "以 URI‘%2$s’ 展開 exec 行‘%1$s’失敗" |
| |
| #: glib/gconvert.c:424 glib/gconvert.c:502 glib/giochannel.c:1148 |
| #, c-format |
| msgid "Conversion from character set '%s' to '%s' is not supported" |
| msgstr "不支援將字符集‘%s’轉換成‘%s’" |
| |
| #: glib/gconvert.c:428 glib/gconvert.c:506 |
| #, c-format |
| msgid "Could not open converter from '%s' to '%s'" |
| msgstr "無法將‘%s’轉換至‘%s’" |
| |
| #: glib/gconvert.c:625 glib/gconvert.c:1010 glib/giochannel.c:1320 |
| #: glib/giochannel.c:1362 glib/giochannel.c:2204 glib/gutf8.c:950 |
| #: glib/gutf8.c:1399 |
| #, c-format |
| msgid "Invalid byte sequence in conversion input" |
| msgstr "轉換輸入資料時遇到不正確的位元組組合" |
| |
| #: glib/gconvert.c:631 glib/gconvert.c:937 glib/giochannel.c:1327 |
| #: glib/giochannel.c:2216 |
| #, c-format |
| msgid "Error during conversion: %s" |
| msgstr "轉換時發生錯誤：%s" |
| |
| #: glib/gconvert.c:662 glib/gutf8.c:946 glib/gutf8.c:1150 glib/gutf8.c:1291 |
| #: glib/gutf8.c:1395 |
| #, c-format |
| msgid "Partial character sequence at end of input" |
| msgstr "輸入資料結束時字符仍未完整" |
| |
| #: glib/gconvert.c:912 |
| #, c-format |
| msgid "Cannot convert fallback '%s' to codeset '%s'" |
| msgstr "無法將後備字串‘%s’的字符集轉換成‘%s’" |
| |
| #: glib/gconvert.c:1726 |
| #, c-format |
| msgid "The URI '%s' is not an absolute URI using the \"file\" scheme" |
| msgstr "URI‘%s’不是使用“file”格式的絕對 URI" |
| |
| #: glib/gconvert.c:1736 |
| #, c-format |
| msgid "The local file URI '%s' may not include a '#'" |
| msgstr "本機檔案的 URI‘%s’不應含有‘#’" |
| |
| #: glib/gconvert.c:1753 |
| #, c-format |
| msgid "The URI '%s' is invalid" |
| msgstr "URI‘%s’無效" |
| |
| #: glib/gconvert.c:1765 |
| #, c-format |
| msgid "The hostname of the URI '%s' is invalid" |
| msgstr "URI‘%s’中的主機名稱無效" |
| |
| #: glib/gconvert.c:1781 |
| #, c-format |
| msgid "The URI '%s' contains invalidly escaped characters" |
| msgstr "URI‘%s’含有「不正確跳出」的字符" |
| |
| #: glib/gconvert.c:1876 |
| #, c-format |
| msgid "The pathname '%s' is not an absolute path" |
| msgstr "路徑名稱‘%s’不是絕對路徑" |
| |
| #: glib/gconvert.c:1886 |
| #, c-format |
| msgid "Invalid hostname" |
| msgstr "主機名稱無效" |
| |
| #: glib/gdir.c:104 glib/gdir.c:124 |
| #, c-format |
| msgid "Error opening directory '%s': %s" |
| msgstr "開啟目錄‘%s’時發生錯誤：%s" |
| |
| #: glib/gfileutils.c:557 glib/gfileutils.c:630 |
| #, c-format |
| msgid "Could not allocate %lu bytes to read file \"%s\"" |
| msgstr "無法配置 %lu 位元來讀取檔案“%s”" |
| |
| #: glib/gfileutils.c:572 |
| #, c-format |
| msgid "Error reading file '%s': %s" |
| msgstr "讀取檔案‘%s’時發生錯誤：%s" |
| |
| #: glib/gfileutils.c:654 |
| #, c-format |
| msgid "Failed to read from file '%s': %s" |
| msgstr "讀取檔案‘%s’失敗：%s" |
| |
| #: glib/gfileutils.c:705 glib/gfileutils.c:792 |
| #, c-format |
| msgid "Failed to open file '%s': %s" |
| msgstr "開啟檔案‘%s’失敗：%s" |
| |
| #: glib/gfileutils.c:722 glib/gmappedfile.c:133 |
| #, c-format |
| msgid "Failed to get attributes of file '%s': fstat() failed: %s" |
| msgstr "獲取檔案‘%s’的屬性失敗：fstat() 失敗：%s" |
| |
| #: glib/gfileutils.c:756 |
| #, c-format |
| msgid "Failed to open file '%s': fdopen() failed: %s" |
| msgstr "開啟檔案‘%s’失敗：fdopen() 失敗：%s" |
| |
| #: glib/gfileutils.c:890 |
| #, c-format |
| msgid "Failed to rename file '%s' to '%s': g_rename() failed: %s" |
| msgstr "檔案名稱由‘%s’改為‘%s’失敗：g_rename() 失敗：%s" |
| |
| #: glib/gfileutils.c:932 glib/gfileutils.c:1390 |
| #, c-format |
| msgid "Failed to create file '%s': %s" |
| msgstr "建立檔案‘%s’失敗：%s" |
| |
| #: glib/gfileutils.c:946 |
| #, c-format |
| msgid "Failed to open file '%s' for writing: fdopen() failed: %s" |
| msgstr "開啟檔案‘%s’作寫入失敗：fdopen() 失敗：%s" |
| |
| #: glib/gfileutils.c:971 |
| #, c-format |
| msgid "Failed to write file '%s': fwrite() failed: %s" |
| msgstr "寫入檔案‘%s’失敗：fwrite() 失敗：%s" |
| |
| #: glib/gfileutils.c:990 |
| #, c-format |
| msgid "Failed to close file '%s': fclose() failed: %s" |
| msgstr "關閉檔案‘%s’失敗：fclose() 失敗：%s" |
| |
| #: glib/gfileutils.c:1108 |
| #, c-format |
| msgid "Existing file '%s' could not be removed: g_unlink() failed: %s" |
| msgstr "現存檔案‘%s’無法移除：g_unlink() 失敗：%s" |
| |
| #: glib/gfileutils.c:1352 |
| #, c-format |
| msgid "Template '%s' invalid, should not contain a '%s'" |
| msgstr "樣式‘%s’無效，不應含有‘%s’" |
| |
| # (Abel) this is file template for mktemp/mkstemp |
| #: glib/gfileutils.c:1365 |
| #, c-format |
| msgid "Template '%s' doesn't contain XXXXXX" |
| msgstr "檔案樣式‘%s’沒有包含 XXXXXX" |
| |
| #: glib/gfileutils.c:1840 |
| #, c-format |
| msgid "Failed to read the symbolic link '%s': %s" |
| msgstr "讀取符號連結‘%s’失敗：%s" |
| |
| #: glib/gfileutils.c:1861 |
| #, c-format |
| msgid "Symbolic links not supported" |
| msgstr "不支援符號連結" |
| |
| #: glib/giochannel.c:1152 |
| #, c-format |
| msgid "Could not open converter from '%s' to '%s': %s" |
| msgstr "無法開啟將‘%s’轉換至‘%s’的轉換器：%s" |
| |
| #: glib/giochannel.c:1497 |
| #, c-format |
| msgid "Can't do a raw read in g_io_channel_read_line_string" |
| msgstr "在 g_io_channel_read_line_string 中無法讀取原始資料" |
| |
| #: glib/giochannel.c:1544 glib/giochannel.c:1801 glib/giochannel.c:1887 |
| #, c-format |
| msgid "Leftover unconverted data in read buffer" |
| msgstr "用來讀取資料的緩衝區中仍有未轉換的資料" |
| |
| #: glib/giochannel.c:1624 glib/giochannel.c:1701 |
| #, c-format |
| msgid "Channel terminates in a partial character" |
| msgstr "在字符未完整之前，輸入管道已經結束" |
| |
| #: glib/giochannel.c:1687 |
| #, c-format |
| msgid "Can't do a raw read in g_io_channel_read_to_end" |
| msgstr "g_io_channel_read_to_end 中無法讀取原始資料" |
| |
| #: glib/gmappedfile.c:116 |
| #, c-format |
| msgid "Failed to open file '%s': open() failed: %s" |
| msgstr "開啟檔案‘%s’失敗：open() 失敗：%s" |
| |
| #: glib/gmappedfile.c:193 |
| #, c-format |
| msgid "Failed to map file '%s': mmap() failed: %s" |
| msgstr "對應檔案‘%s’失敗：mmap() 失敗：%s" |
| |
| #: glib/gmarkup.c:226 |
| #, c-format |
| msgid "Error on line %d char %d: %s" |
| msgstr "第 %d 行第 %d 個字發生錯誤：%s" |
| |
| #: glib/gmarkup.c:324 |
| #, c-format |
| msgid "Error on line %d: %s" |
| msgstr "第 %d 行發生錯誤：%s" |
| |
| #: glib/gmarkup.c:428 |
| msgid "" |
| "Empty entity '&;' seen; valid entities are: & " < > '" |
| msgstr "出現空白的實體‘&;’；可用的實體為：& " < > '" |
| |
| #: glib/gmarkup.c:438 |
| #, c-format |
| msgid "" |
| "Character '%s' is not valid at the start of an entity name; the & character " |
| "begins an entity; if this ampersand isn't supposed to be an entity, escape " |
| "it as &" |
| msgstr "" |
| "實體名稱不應以‘%s’開始，應該使用 & 字符；如果這個 & 字符不是作為實體使用，請" |
| "將 & 轉換為 &" |
| |
| #: glib/gmarkup.c:472 |
| #, c-format |
| msgid "Character '%s' is not valid inside an entity name" |
| msgstr "實體名稱中不應含有字符‘%s’" |
| |
| #: glib/gmarkup.c:509 |
| #, c-format |
| msgid "Entity name '%s' is not known" |
| msgstr "實體名稱‘%s’意義不明" |
| |
| #: glib/gmarkup.c:520 |
| msgid "" |
| "Entity did not end with a semicolon; most likely you used an ampersand " |
| "character without intending to start an entity - escape ampersand as &" |
| msgstr "" |
| "實體的結束部分不是分號；很可能你想使用 & 字符但未將它變為實體 ─ 請將 & 轉換" |
| "為 &" |
| |
| #: glib/gmarkup.c:573 |
| #, c-format |
| msgid "" |
| "Failed to parse '%-.*s', which should have been a digit inside a character " |
| "reference (ê for example) - perhaps the digit is too large" |
| msgstr "無法解析‘%-.*s’，字符參引內應該含有數字（例如 ê）─ 可能是數字太大" |
| |
| #: glib/gmarkup.c:598 |
| #, c-format |
| msgid "Character reference '%-.*s' does not encode a permitted character" |
| msgstr "字符參引‘%-.*s’無法表示任何能接受的字符" |
| |
| #: glib/gmarkup.c:613 |
| msgid "Empty character reference; should include a digit such as dž" |
| msgstr "字符參引是空白的；它應該包括數字，像 dž" |
| |
| #: glib/gmarkup.c:623 |
| msgid "" |
| "Character reference did not end with a semicolon; most likely you used an " |
| "ampersand character without intending to start an entity - escape ampersand " |
| "as &" |
| msgstr "" |
| "字符參引的結束部分不是分號；很可能你想使用 & 字符但未將它變為實體 ─ 請將 & 轉" |
| "換為 &" |
| |
| #: glib/gmarkup.c:709 |
| msgid "Unfinished entity reference" |
| msgstr "未完成的實體參引" |
| |
| #: glib/gmarkup.c:715 |
| msgid "Unfinished character reference" |
| msgstr "未完成的字符參引" |
| |
| #: glib/gmarkup.c:958 |
| #, fuzzy |
| msgid "Invalid UTF-8 encoded text - overlong sequence" |
| msgstr "無效的 UTF-8 編碼文字" |
| |
| #: glib/gmarkup.c:986 |
| #, fuzzy |
| msgid "Invalid UTF-8 encoded text - not a start char" |
| msgstr "無效的 UTF-8 編碼文字" |
| |
| #: glib/gmarkup.c:1022 |
| #, fuzzy, c-format |
| msgid "Invalid UTF-8 encoded text - not valid '%s'" |
| msgstr "無效的 UTF-8 編碼文字" |
| |
| #: glib/gmarkup.c:1060 |
| msgid "Document must begin with an element (e.g. <book>)" |
| msgstr "文件開始必須為一元素（例如 <book>）" |
| |
| #: glib/gmarkup.c:1100 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following a '<' character; it may not begin an " |
| "element name" |
| msgstr "‘<’字符後的‘%s’不是有效的字符；這樣不可能是元素名稱的開始部份" |
| |
| #: glib/gmarkup.c:1164 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '>' character to end the start tag of element " |
| "'%s'" |
| msgstr "字符‘%s’不尋常，元素‘%s’的開始標籤應該以‘>’字符結束" |
| |
| #: glib/gmarkup.c:1253 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'" |
| msgstr "不尋常的字符‘%s’，屬性名稱‘%s’（屬於元素‘%s’）後應該是‘=’字符" |
| |
| #: glib/gmarkup.c:1295 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '>' or '/' character to end the start tag of " |
| "element '%s', or optionally an attribute; perhaps you used an invalid " |
| "character in an attribute name" |
| msgstr "" |
| "不尋常的字符‘%s’，元素‘%s’的開始標籤應該以‘>’或‘/’字符終結，也可以是屬性；或" |
| "許你在屬性名稱中使用了無效的字符" |
| |
| #: glib/gmarkup.c:1384 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected an open quote mark after the equals sign when " |
| "giving value for attribute '%s' of element '%s'" |
| msgstr "" |
| "不尋常的字符‘%s’，當指定屬性‘%s’的值（屬於元素‘%s’）時，等號後應該出現開引號" |
| |
| #: glib/gmarkup.c:1529 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following the characters '</'; '%s' may not " |
| "begin an element name" |
| msgstr "‘</’字符後的‘%s’不是有效的字符；‘%s’不可能是元素名稱的開始部份" |
| |
| #: glib/gmarkup.c:1569 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following the close element name '%s'; the " |
| "allowed character is '>'" |
| msgstr "字符‘%s’是無效的（位置在關閉元素‘%s’末端）；允許的字符為「>」" |
| |
| #: glib/gmarkup.c:1580 |
| #, c-format |
| msgid "Element '%s' was closed, no element is currently open" |
| msgstr "元素‘%s’已關閉，沒有開啟中的元素" |
| |
| #: glib/gmarkup.c:1589 |
| #, c-format |
| msgid "Element '%s' was closed, but the currently open element is '%s'" |
| msgstr "元素‘%s’已關閉，但開啟中的元素是‘%s’" |
| |
| #: glib/gmarkup.c:1755 |
| msgid "Document was empty or contained only whitespace" |
| msgstr "文件完全空白或只含有空白字符" |
| |
| #: glib/gmarkup.c:1769 |
| msgid "Document ended unexpectedly just after an open angle bracket '<'" |
| msgstr "文件在尖角括號‘<’後突然終止" |
| |
| #: glib/gmarkup.c:1777 glib/gmarkup.c:1822 |
| #, c-format |
| msgid "" |
| "Document ended unexpectedly with elements still open - '%s' was the last " |
| "element opened" |
| msgstr "在仍然有開啟中的元素時，文件突然結束 ─‘%s’是最後一個開啟的元素" |
| |
| #: glib/gmarkup.c:1785 |
| #, c-format |
| msgid "" |
| "Document ended unexpectedly, expected to see a close angle bracket ending " |
| "the tag <%s/>" |
| msgstr "文件突然結束，本來應該出現用來關閉標籤 <%s/> 的尖角括號" |
| |
| #: glib/gmarkup.c:1791 |
| msgid "Document ended unexpectedly inside an element name" |
| msgstr "在元素的名稱內，文件突然結束" |
| |
| #: glib/gmarkup.c:1797 |
| msgid "Document ended unexpectedly inside an attribute name" |
| msgstr "在屬性名稱內，文件突然結束" |
| |
| #: glib/gmarkup.c:1802 |
| msgid "Document ended unexpectedly inside an element-opening tag." |
| msgstr "在元素的開啟標籤內，文件突然結束" |
| |
| #: glib/gmarkup.c:1808 |
| msgid "" |
| "Document ended unexpectedly after the equals sign following an attribute " |
| "name; no attribute value" |
| msgstr "在屬性名稱的等號後，文件突然結束；沒有屬性值" |
| |
| #: glib/gmarkup.c:1815 |
| msgid "Document ended unexpectedly while inside an attribute value" |
| msgstr "在屬性值內，文件突然結束" |
| |
| #: glib/gmarkup.c:1831 |
| #, c-format |
| msgid "Document ended unexpectedly inside the close tag for element '%s'" |
| msgstr "在元素‘%s’的關閉標籤內，文件突然結束" |
| |
| #: glib/gmarkup.c:1837 |
| msgid "Document ended unexpectedly inside a comment or processing instruction" |
| msgstr "在註解或處理指示內，文件突然結束" |
| |
| #: glib/gregex.c:131 |
| msgid "corrupted object" |
| msgstr "" |
| |
| #: glib/gregex.c:133 |
| msgid "internal error or corrupted object" |
| msgstr "" |
| |
| #: glib/gregex.c:135 |
| msgid "out of memory" |
| msgstr "" |
| |
| #: glib/gregex.c:140 |
| msgid "backtracking limit reached" |
| msgstr "" |
| |
| #: glib/gregex.c:152 glib/gregex.c:160 |
| msgid "the pattern contains items not supported for partial matching" |
| msgstr "" |
| |
| #: glib/gregex.c:154 |
| msgid "internal error" |
| msgstr "" |
| |
| #: glib/gregex.c:162 |
| msgid "back references as conditions are not supported for partial matching" |
| msgstr "" |
| |
| #: glib/gregex.c:171 |
| msgid "recursion limit reached" |
| msgstr "" |
| |
| #: glib/gregex.c:173 |
| msgid "workspace limit for empty substrings reached" |
| msgstr "" |
| |
| #: glib/gregex.c:175 |
| msgid "invalid combination of newline flags" |
| msgstr "" |
| |
| #: glib/gregex.c:179 |
| msgid "unknown error" |
| msgstr "" |
| |
| #: glib/gregex.c:324 glib/gregex.c:1367 |
| #, c-format |
| msgid "Error while matching regular expression %s: %s" |
| msgstr "" |
| |
| #: glib/gregex.c:876 |
| msgid "PCRE library is compiled without UTF8 support" |
| msgstr "" |
| |
| #: glib/gregex.c:885 |
| msgid "PCRE library is compiled without UTF8 properties support" |
| msgstr "" |
| |
| #: glib/gregex.c:935 |
| #, fuzzy, c-format |
| msgid "Error while compiling regular expression %s at char %d: %s" |
| msgstr "第 %d 行第 %d 個字發生錯誤：%s" |
| |
| #: glib/gregex.c:971 |
| #, c-format |
| msgid "Error while optimizing regular expression %s: %s" |
| msgstr "" |
| |
| #: glib/gregex.c:1795 |
| msgid "hexadecimal digit or '}' expected" |
| msgstr "" |
| |
| #: glib/gregex.c:1811 |
| msgid "hexadecimal digit expected" |
| msgstr "" |
| |
| #: glib/gregex.c:1851 |
| msgid "missing '<' in symbolic reference" |
| msgstr "" |
| |
| #: glib/gregex.c:1860 |
| #, fuzzy |
| msgid "unfinished symbolic reference" |
| msgstr "未完成的實體參引" |
| |
| #: glib/gregex.c:1867 |
| msgid "zero-length symbolic reference" |
| msgstr "" |
| |
| #: glib/gregex.c:1878 |
| msgid "digit expected" |
| msgstr "" |
| |
| #: glib/gregex.c:1896 |
| msgid "illegal symbolic reference" |
| msgstr "" |
| |
| #: glib/gregex.c:1958 |
| msgid "stray final '\\'" |
| msgstr "" |
| |
| #: glib/gregex.c:1962 |
| msgid "unknown escape sequence" |
| msgstr "" |
| |
| #: glib/gregex.c:1972 |
| #, c-format |
| msgid "Error while parsing replacement text \"%s\" at char %lu: %s" |
| msgstr "" |
| |
| #: glib/gshell.c:70 |
| #, c-format |
| msgid "Quoted text doesn't begin with a quotation mark" |
| msgstr "應該用引號括起來的文字不是以括號為開始" |
| |
| #: glib/gshell.c:160 |
| #, c-format |
| msgid "Unmatched quotation mark in command line or other shell-quoted text" |
| msgstr "指令列或其它標為指令的字串內有不對稱的引號" |
| |
| #: glib/gshell.c:538 |
| #, c-format |
| msgid "Text ended just after a '\\' character. (The text was '%s')" |
| msgstr "文字在‘\\’字符後就終止了。（文字為‘%s’）" |
| |
| #: glib/gshell.c:545 |
| #, c-format |
| msgid "Text ended before matching quote was found for %c. (The text was '%s')" |
| msgstr "字串完結前仍沒有對應於 %c 的引號（字串為‘%s’）" |
| |
| #: glib/gshell.c:557 |
| #, c-format |
| msgid "Text was empty (or contained only whitespace)" |
| msgstr "文字是空白的（或只含有空白字符）" |
| |
| #: glib/gspawn-win32.c:272 |
| #, c-format |
| msgid "Failed to read data from child process" |
| msgstr "無法從副進程讀取資料" |
| |
| #: glib/gspawn-win32.c:287 glib/gspawn.c:1450 |
| #, c-format |
| msgid "Failed to create pipe for communicating with child process (%s)" |
| msgstr "無法建立管道來和副進程溝通 (%s)" |
| |
| #: glib/gspawn-win32.c:325 glib/gspawn.c:1114 |
| #, c-format |
| msgid "Failed to read from child pipe (%s)" |
| msgstr "無法從管道讀取資料 (%s)" |
| |
| #: glib/gspawn-win32.c:351 glib/gspawn.c:1319 |
| #, c-format |
| msgid "Failed to change to directory '%s' (%s)" |
| msgstr "無法進入目錄‘%s’(%s)" |
| |
| #: glib/gspawn-win32.c:357 glib/gspawn-win32.c:481 |
| #, c-format |
| msgid "Failed to execute child process (%s)" |
| msgstr "無法執行副進程 (%s)" |
| |
| #: glib/gspawn-win32.c:428 |
| #, c-format |
| msgid "Invalid program name: %s" |
| msgstr "程式名稱無效：%s" |
| |
| #: glib/gspawn-win32.c:438 glib/gspawn-win32.c:678 glib/gspawn-win32.c:1218 |
| #, c-format |
| msgid "Invalid string in argument vector at %d: %s" |
| msgstr "第 %d 個引數中含無效的字串：%s" |
| |
| #: glib/gspawn-win32.c:449 glib/gspawn-win32.c:692 glib/gspawn-win32.c:1251 |
| #, c-format |
| msgid "Invalid string in environment: %s" |
| msgstr "環境變數中的字串無效：%s" |
| |
| #: glib/gspawn-win32.c:674 glib/gspawn-win32.c:1199 |
| #, c-format |
| msgid "Invalid working directory: %s" |
| msgstr "無效的工作目錄：%s" |
| |
| #: glib/gspawn-win32.c:738 |
| #, c-format |
| msgid "Failed to execute helper program (%s)" |
| msgstr "無法執行協助程式 (%s)" |
| |
| #: glib/gspawn-win32.c:938 |
| #, c-format |
| msgid "" |
| "Unexpected error in g_io_channel_win32_poll() reading data from a child " |
| "process" |
| msgstr "當 g_io_channel_win32_poll() 從副進程讀取資料時發生無法預計的錯誤" |
| |
| #: glib/gspawn.c:180 |
| #, c-format |
| msgid "Failed to read data from child process (%s)" |
| msgstr "無法從副進程讀取資料 (%s)" |
| |
| #: glib/gspawn.c:312 |
| #, c-format |
| msgid "Unexpected error in select() reading data from a child process (%s)" |
| msgstr "當 select() 從副進程讀取資料時發生無法預計的錯誤 (%s)" |
| |
| #: glib/gspawn.c:395 |
| #, c-format |
| msgid "Unexpected error in waitpid() (%s)" |
| msgstr "waitpid() 發生無法預計的錯誤 (%s)" |
| |
| #: glib/gspawn.c:1179 |
| #, c-format |
| msgid "Failed to fork (%s)" |
| msgstr "無法衍生進程 (%s)" |
| |
| #: glib/gspawn.c:1329 |
| #, c-format |
| msgid "Failed to execute child process \"%s\" (%s)" |
| msgstr "無法執行副進程“%s”(%s)" |
| |
| #: glib/gspawn.c:1339 |
| #, c-format |
| msgid "Failed to redirect output or input of child process (%s)" |
| msgstr "無法將副進程的輸出或輸入重新導向 (%s)" |
| |
| #: glib/gspawn.c:1348 |
| #, c-format |
| msgid "Failed to fork child process (%s)" |
| msgstr "無法衍生副進程 (%s)" |
| |
| #: glib/gspawn.c:1356 |
| #, c-format |
| msgid "Unknown error executing child process \"%s\"" |
| msgstr "執行副進程“%s”時發生不明的錯誤" |
| |
| #: glib/gspawn.c:1378 |
| #, c-format |
| msgid "Failed to read enough data from child pid pipe (%s)" |
| msgstr "無法從 child pid pipe 讀取足夠的資料 (%s)" |
| |
| #: glib/gutf8.c:1024 |
| #, c-format |
| msgid "Character out of range for UTF-8" |
| msgstr "字符不在 UTF-8 範圍之內" |
| |
| #: glib/gutf8.c:1118 glib/gutf8.c:1127 glib/gutf8.c:1259 glib/gutf8.c:1268 |
| #: glib/gutf8.c:1409 glib/gutf8.c:1505 |
| #, c-format |
| msgid "Invalid sequence in conversion input" |
| msgstr "轉換輸入資料時出現無效的字符次序" |
| |
| #: glib/gutf8.c:1420 glib/gutf8.c:1516 |
| #, c-format |
| msgid "Character out of range for UTF-16" |
| msgstr "字符不在 UTF-16 範圍之內" |
| |
| #: glib/goption.c:573 |
| msgid "Usage:" |
| msgstr "用法：" |
| |
| #: glib/goption.c:573 |
| msgid "[OPTION...]" |
| msgstr "[選項...]" |
| |
| #: glib/goption.c:677 |
| msgid "Help Options:" |
| msgstr "說明選項：" |
| |
| #: glib/goption.c:678 |
| msgid "Show help options" |
| msgstr "顯示說明的選項" |
| |
| #: glib/goption.c:684 |
| msgid "Show all help options" |
| msgstr "顯示所有的說明選項" |
| |
| #: glib/goption.c:736 |
| msgid "Application Options:" |
| msgstr "應用程式選項：" |
| |
| #: glib/goption.c:797 glib/goption.c:867 |
| #, c-format |
| msgid "Cannot parse integer value '%s' for %s" |
| msgstr "無法給 %2$s 解析整數值‘%1$s’" |
| |
| #: glib/goption.c:807 glib/goption.c:875 |
| #, c-format |
| msgid "Integer value '%s' for %s out of range" |
| msgstr "%2$s 的整數值‘%1$s’超出範圍" |
| |
| #: glib/goption.c:832 |
| #, c-format |
| msgid "Cannot parse double value '%s' for %s" |
| msgstr "無法給 %2$s 解析雙精度浮點數‘%1$s’" |
| |
| #: glib/goption.c:840 |
| #, c-format |
| msgid "Double value '%s' for %s out of range" |
| msgstr "%2$s 的雙精度浮點數‘%1$s’超出範圍" |
| |
| #: glib/goption.c:1177 |
| #, c-format |
| msgid "Error parsing option %s" |
| msgstr "解析 %s 選項時發生錯誤" |
| |
| #: glib/goption.c:1208 glib/goption.c:1319 |
| #, c-format |
| msgid "Missing argument for %s" |
| msgstr "缺少 %s 的參數" |
| |
| #: glib/goption.c:1714 |
| #, c-format |
| msgid "Unknown option %s" |
| msgstr "未知的選項 %s" |
| |
| #: glib/gkeyfile.c:341 |
| #, fuzzy, c-format |
| msgid "Valid key file could not be found in search dirs" |
| msgstr "在資料目錄中找不到有效的設定鍵檔案" |
| |
| #: glib/gkeyfile.c:376 |
| #, c-format |
| msgid "Not a regular file" |
| msgstr "不是普通檔案" |
| |
| #: glib/gkeyfile.c:384 |
| #, c-format |
| msgid "File is empty" |
| msgstr "檔案是空白的" |
| |
| #: glib/gkeyfile.c:746 |
| #, c-format |
| msgid "" |
| "Key file contains line '%s' which is not a key-value pair, group, or comment" |
| msgstr "設定鍵檔案中‘%s’行並非設定鍵值配對、羣組或註解" |
| |
| #: glib/gkeyfile.c:806 |
| #, c-format |
| msgid "Invalid group name: %s" |
| msgstr "無效的羣組名稱：%s" |
| |
| #: glib/gkeyfile.c:828 |
| #, c-format |
| msgid "Key file does not start with a group" |
| msgstr "設定鍵檔案並非以羣組開頭" |
| |
| #: glib/gkeyfile.c:854 |
| #, c-format |
| msgid "Invalid key name: %s" |
| msgstr "無效的設定鍵名稱：%s" |
| |
| #: glib/gkeyfile.c:881 |
| #, c-format |
| msgid "Key file contains unsupported encoding '%s'" |
| msgstr "設定鍵檔案包含不支援的編碼‘%s’" |
| |
| #: glib/gkeyfile.c:1094 glib/gkeyfile.c:1253 glib/gkeyfile.c:2471 |
| #: glib/gkeyfile.c:2537 glib/gkeyfile.c:2656 glib/gkeyfile.c:2791 |
| #: glib/gkeyfile.c:2944 glib/gkeyfile.c:3124 glib/gkeyfile.c:3181 |
| #, c-format |
| msgid "Key file does not have group '%s'" |
| msgstr "設定鍵檔案沒有羣組‘%s’" |
| |
| #: glib/gkeyfile.c:1265 |
| #, c-format |
| msgid "Key file does not have key '%s'" |
| msgstr "設定鍵檔案沒有設定鍵‘%s’" |
| |
| #: glib/gkeyfile.c:1367 glib/gkeyfile.c:1480 |
| #, c-format |
| msgid "Key file contains key '%s' with value '%s' which is not UTF-8" |
| msgstr "設定鍵檔案包含的設定鍵‘%s’（數值為‘%s’）並非 UTF-8" |
| |
| #: glib/gkeyfile.c:1387 glib/gkeyfile.c:1500 glib/gkeyfile.c:1873 |
| #, c-format |
| msgid "Key file contains key '%s' which has value that cannot be interpreted." |
| msgstr "設定鍵檔案包含的設定鍵‘%s’的數值無法解譯。" |
| |
| #: glib/gkeyfile.c:2088 glib/gkeyfile.c:2300 |
| #, c-format |
| msgid "" |
| "Key file contains key '%s' in group '%s' which has value that cannot be " |
| "interpreted." |
| msgstr "設定鍵檔案包含的羣組‘%2$s’中設定鍵‘%1$s’數值無法解譯" |
| |
| #: glib/gkeyfile.c:2486 glib/gkeyfile.c:2671 glib/gkeyfile.c:3192 |
| #, c-format |
| msgid "Key file does not have key '%s' in group '%s'" |
| msgstr "設定鍵檔案的羣組‘%2$s’中沒有設定鍵‘%1$s’" |
| |
| #: glib/gkeyfile.c:3431 |
| #, c-format |
| msgid "Key file contains escape character at end of line" |
| msgstr "設定鍵檔案在行尾包含跳出字符" |
| |
| #: glib/gkeyfile.c:3453 |
| #, c-format |
| msgid "Key file contains invalid escape sequence '%s'" |
| msgstr "設定鍵檔案含有不正確的「跳出字符」‘%s’" |
| |
| #: glib/gkeyfile.c:3595 |
| #, c-format |
| msgid "Value '%s' cannot be interpreted as a number." |
| msgstr "數值‘%s’不能被解譯為數字。" |
| |
| #: glib/gkeyfile.c:3609 |
| #, c-format |
| msgid "Integer value '%s' out of range" |
| msgstr "整數值‘%s’超出範圍" |
| |
| #: glib/gkeyfile.c:3642 |
| #, c-format |
| msgid "Value '%s' cannot be interpreted as a float number." |
| msgstr "數值‘%s’不能被解譯為浮點數。" |
| |
| #: glib/gkeyfile.c:3666 |
| #, c-format |
| msgid "Value '%s' cannot be interpreted as a boolean." |
| msgstr "數值‘%s’不能被解譯為邏輯值。" |
