| # Chinese (Taiwan) translation for glib 2.x |
| # Copyright (C) 2001, 02, 03, 05 Free Software Foundation, Inc. |
| # |
| # XML glossary from http://xml.ascc.net/zh/big5/gloss.html |
| # |
| # Chao-Hsiung Liao <j_h_liau@yahoo.com.tw>, 2005. |
| # Abel Cheung <abel@oaka.org>, 2001-2003, 2005. |
| # Woodman Tuen <wmtuen@gmail.com>, 2005. |
| # |
| # |
| msgid "" |
| msgstr "" |
| "Project-Id-Version: glib 2.9.2\n" |
| "Report-Msgid-Bugs-To: \n" |
| "POT-Creation-Date: 2006-03-07 13:10-0500\n" |
| "PO-Revision-Date: 2006-01-04 10:19+0800\n" |
| "Last-Translator: Abel Cheung <abel@oaka.org>\n" |
| "Language-Team: Chinese (Taiwan) <community@linuxhall.org>\n" |
| "MIME-Version: 1.0\n" |
| "Content-Type: text/plain; charset=UTF-8\n" |
| "Content-Transfer-Encoding: 8bit\n" |
| |
| #: glib/gconvert.c:408 glib/gconvert.c:486 glib/giochannel.c:1150 |
| #, c-format |
| msgid "Conversion from character set '%s' to '%s' is not supported" |
| msgstr "不支援將字元集「%s」轉換成「%s」" |
| |
| #: glib/gconvert.c:412 glib/gconvert.c:490 |
| #, c-format |
| msgid "Could not open converter from '%s' to '%s'" |
| msgstr "無法將「%s」轉換至「%s」" |
| |
| #: glib/gconvert.c:606 glib/gconvert.c:995 glib/giochannel.c:1322 |
| #: glib/giochannel.c:1364 glib/giochannel.c:2206 glib/gutf8.c:943 |
| #: glib/gutf8.c:1392 |
| #, c-format |
| msgid "Invalid byte sequence in conversion input" |
| msgstr "轉換輸入資料時遇到不正確的位元組組合" |
| |
| #: glib/gconvert.c:612 glib/gconvert.c:922 glib/giochannel.c:1329 |
| #: glib/giochannel.c:2218 |
| #, c-format |
| msgid "Error during conversion: %s" |
| msgstr "轉換時發生錯誤:%s" |
| |
| #: glib/gconvert.c:647 glib/gutf8.c:939 glib/gutf8.c:1143 glib/gutf8.c:1284 |
| #: glib/gutf8.c:1388 |
| #, c-format |
| msgid "Partial character sequence at end of input" |
| msgstr "輸入資料結束時字元仍未完整" |
| |
| #: glib/gconvert.c:897 |
| #, c-format |
| msgid "Cannot convert fallback '%s' to codeset '%s'" |
| msgstr "無法將後備字串「%s」的字元集轉換成「%s」" |
| |
| #: glib/gconvert.c:1706 |
| #, c-format |
| msgid "The URI '%s' is not an absolute URI using the \"file\" scheme" |
| msgstr "URI「%s」不是使用“file”格式的絕對 URI" |
| |
| #: glib/gconvert.c:1716 |
| #, c-format |
| msgid "The local file URI '%s' may not include a '#'" |
| msgstr "本機檔案的 URI「%s」不應含有‘#’" |
| |
| #: glib/gconvert.c:1733 |
| #, c-format |
| msgid "The URI '%s' is invalid" |
| msgstr "URI「%s」無效" |
| |
| #: glib/gconvert.c:1745 |
| #, c-format |
| msgid "The hostname of the URI '%s' is invalid" |
| msgstr "URI「%s」中的主機名稱無效" |
| |
| #: glib/gconvert.c:1761 |
| #, c-format |
| msgid "The URI '%s' contains invalidly escaped characters" |
| msgstr "URI「%s」含有「不正確跳出」的字元" |
| |
| #: glib/gconvert.c:1855 |
| #, c-format |
| msgid "The pathname '%s' is not an absolute path" |
| msgstr "路徑名稱「%s」不是絕對路徑" |
| |
| #: glib/gconvert.c:1865 |
| #, c-format |
| msgid "Invalid hostname" |
| msgstr "主機名稱無效" |
| |
| #: glib/gdir.c:121 glib/gdir.c:141 |
| #, c-format |
| msgid "Error opening directory '%s': %s" |
| msgstr "開啟目錄「%s」時發生錯誤:%s" |
| |
| #: glib/gfileutils.c:576 glib/gfileutils.c:649 |
| #, c-format |
| msgid "Could not allocate %lu bytes to read file \"%s\"" |
| msgstr "無法配置 %lu 位元來讀取檔案「%s」" |
| |
| #: glib/gfileutils.c:591 |
| #, c-format |
| msgid "Error reading file '%s': %s" |
| msgstr "讀取檔案「%s」時發生錯誤:%s" |
| |
| #: glib/gfileutils.c:673 |
| #, c-format |
| msgid "Failed to read from file '%s': %s" |
| msgstr "讀取檔案「%s」失敗:%s" |
| |
| #: glib/gfileutils.c:724 glib/gfileutils.c:811 |
| #, c-format |
| msgid "Failed to open file '%s': %s" |
| msgstr "開啟檔案「%s」失敗:%s" |
| |
| #: glib/gfileutils.c:741 glib/gmappedfile.c:133 |
| #, c-format |
| msgid "Failed to get attributes of file '%s': fstat() failed: %s" |
| msgstr "獲取檔案「%s」的屬性失敗:fstat() 失敗:%s" |
| |
| #: glib/gfileutils.c:775 |
| #, c-format |
| msgid "Failed to open file '%s': fdopen() failed: %s" |
| msgstr "開啟檔案「%s」失敗:fdopen() 失敗:%s" |
| |
| #: glib/gfileutils.c:909 |
| #, c-format |
| msgid "Failed to rename file '%s' to '%s': g_rename() failed: %s" |
| msgstr "檔案名稱由「%s」改為「%s」失敗:g_rename() 失敗:%s" |
| |
| #: glib/gfileutils.c:950 glib/gfileutils.c:1415 |
| #, c-format |
| msgid "Failed to create file '%s': %s" |
| msgstr "建立檔案「%s」失敗:%s" |
| |
| #: glib/gfileutils.c:964 |
| #, c-format |
| msgid "Failed to open file '%s' for writing: fdopen() failed: %s" |
| msgstr "開啟檔案「%s」作寫入失敗:fdopen() 失敗:%s" |
| |
| #: glib/gfileutils.c:989 |
| #, c-format |
| msgid "Failed to write file '%s': fwrite() failed: %s" |
| msgstr "寫入檔案「%s」失敗:fwrite() 失敗:%s" |
| |
| #: glib/gfileutils.c:1008 |
| #, c-format |
| msgid "Failed to close file '%s': fclose() failed: %s" |
| msgstr "關閉檔案「%s」失敗:fclose() 失敗:%s" |
| |
| #: glib/gfileutils.c:1126 |
| #, c-format |
| msgid "Existing file '%s' could not be removed: g_unlink() failed: %s" |
| msgstr "現存檔案「%s」無法移除:g_unlink() 失敗:%s" |
| |
| #: glib/gfileutils.c:1376 |
| #, c-format |
| msgid "Template '%s' invalid, should not contain a '%s'" |
| msgstr "樣式「%s」無效,不應含有「%s」" |
| |
| # (Abel) this is file template for mktemp/mkstemp |
| #: glib/gfileutils.c:1390 |
| #, c-format |
| msgid "Template '%s' doesn't end with XXXXXX" |
| msgstr "檔案樣式「%s」末端不是 XXXXXX" |
| |
| #: glib/gfileutils.c:1865 |
| #, c-format |
| msgid "Failed to read the symbolic link '%s': %s" |
| msgstr "讀取符號連結「%s」失敗:%s" |
| |
| #: glib/gfileutils.c:1886 |
| #, c-format |
| msgid "Symbolic links not supported" |
| msgstr "不支援符號連結" |
| |
| #: glib/giochannel.c:1154 |
| #, c-format |
| msgid "Could not open converter from '%s' to '%s': %s" |
| msgstr "無法開啟將「%s」轉換至「%s」的轉換器:%s" |
| |
| #: glib/giochannel.c:1499 |
| #, c-format |
| msgid "Can't do a raw read in g_io_channel_read_line_string" |
| msgstr "在 g_io_channel_read_line_string 中無法讀取原始資料" |
| |
| #: glib/giochannel.c:1546 glib/giochannel.c:1803 glib/giochannel.c:1889 |
| #, c-format |
| msgid "Leftover unconverted data in read buffer" |
| msgstr "用來讀取資料的緩衝區中仍有未轉換的資料" |
| |
| #: glib/giochannel.c:1626 glib/giochannel.c:1703 |
| #, c-format |
| msgid "Channel terminates in a partial character" |
| msgstr "在字元未完整之前,輸入管道已經結束" |
| |
| #: glib/giochannel.c:1689 |
| #, c-format |
| msgid "Can't do a raw read in g_io_channel_read_to_end" |
| msgstr "g_io_channel_read_to_end 中無法讀取原始資料" |
| |
| #: glib/gmappedfile.c:116 |
| #, c-format |
| msgid "Failed to open file '%s': open() failed: %s" |
| msgstr "開啟檔案「%s」失敗:open() 失敗:%s" |
| |
| #: glib/gmappedfile.c:193 |
| #, c-format |
| msgid "Failed to map file '%s': mmap() failed: %s" |
| msgstr "對應檔案「%s」失敗:mmap() 失敗:%s" |
| |
| #: glib/gmarkup.c:232 |
| #, c-format |
| msgid "Error on line %d char %d: %s" |
| msgstr "第 %d 行第 %d 個字發生錯誤:%s" |
| |
| #: glib/gmarkup.c:330 |
| #, c-format |
| msgid "Error on line %d: %s" |
| msgstr "第 %d 行發生錯誤:%s" |
| |
| #: glib/gmarkup.c:434 |
| msgid "" |
| "Empty entity '&;' seen; valid entities are: & " < > '" |
| msgstr "出現空白的實體「&;」;可用的實體為:& " < > '" |
| |
| #: glib/gmarkup.c:444 |
| #, c-format |
| msgid "" |
| "Character '%s' is not valid at the start of an entity name; the & character " |
| "begins an entity; if this ampersand isn't supposed to be an entity, escape " |
| "it as &" |
| msgstr "" |
| "實體名稱不應以「%s」開始,應該使用 & 字元;如果這個 & 字元不是作為實體使用," |
| "請將 & 轉換為 &" |
| |
| #: glib/gmarkup.c:478 |
| #, c-format |
| msgid "Character '%s' is not valid inside an entity name" |
| msgstr "實體名稱中不應含有字元「%s」" |
| |
| #: glib/gmarkup.c:515 |
| #, c-format |
| msgid "Entity name '%s' is not known" |
| msgstr "實體名稱「%s」意義不明" |
| |
| #: glib/gmarkup.c:526 |
| msgid "" |
| "Entity did not end with a semicolon; most likely you used an ampersand " |
| "character without intending to start an entity - escape ampersand as &" |
| msgstr "" |
| "實體的結束部分不是分號;很可能您想使用 & 字元但未將它變為實體 ─ 請將 & 轉換" |
| "為 &" |
| |
| #: glib/gmarkup.c:579 |
| #, c-format |
| msgid "" |
| "Failed to parse '%-.*s', which should have been a digit inside a character " |
| "reference (ê for example) - perhaps the digit is too large" |
| msgstr "" |
| "無法解析「%-.*s」,字元參引內應該含有數字(例如 ê)─ 可能是數字太大" |
| |
| #: glib/gmarkup.c:604 |
| #, c-format |
| msgid "Character reference '%-.*s' does not encode a permitted character" |
| msgstr "字元參引「%-.*s」無法表示任何能接受的字元" |
| |
| #: glib/gmarkup.c:619 |
| msgid "Empty character reference; should include a digit such as dž" |
| msgstr "字元參引是空白的;它應該包括數字,像 dž" |
| |
| #: glib/gmarkup.c:629 |
| msgid "" |
| "Character reference did not end with a semicolon; most likely you used an " |
| "ampersand character without intending to start an entity - escape ampersand " |
| "as &" |
| msgstr "" |
| "字元參引的結束部分不是分號;很可能您想使用 & 字元但未將它變為實體 ─ 請將 & 轉" |
| "換為 &" |
| |
| #: glib/gmarkup.c:715 |
| msgid "Unfinished entity reference" |
| msgstr "未完成的實體參引" |
| |
| #: glib/gmarkup.c:721 |
| msgid "Unfinished character reference" |
| msgstr "未完成的字元參引" |
| |
| #: glib/gmarkup.c:964 glib/gmarkup.c:992 glib/gmarkup.c:1023 |
| msgid "Invalid UTF-8 encoded text" |
| msgstr "無效的 UTF-8 編碼文字" |
| |
| #: glib/gmarkup.c:1059 |
| msgid "Document must begin with an element (e.g. <book>)" |
| msgstr "文件開始必須為一元素(例如 <book>)" |
| |
| #: glib/gmarkup.c:1099 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following a '<' character; it may not begin an " |
| "element name" |
| msgstr "「<」字元後的「%s」不是有效的字元;這樣不可能是元素名稱的開始部份" |
| |
| #: glib/gmarkup.c:1163 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '>' character to end the start tag of element " |
| "'%s'" |
| msgstr "字元「%s」不尋常,元素「%s」的開始標籤應該以「>」字元結束" |
| |
| #: glib/gmarkup.c:1252 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '=' after attribute name '%s' of element '%s'" |
| msgstr "不尋常的字元「%s」,屬性名稱「%s」(屬於元素「%s」)後應該是「=」字元" |
| |
| #: glib/gmarkup.c:1294 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected a '>' or '/' character to end the start tag of " |
| "element '%s', or optionally an attribute; perhaps you used an invalid " |
| "character in an attribute name" |
| msgstr "" |
| "不尋常的字元「%s」,元素「%s」的開始標籤應該以「>」或「/」字元終結,也可以是" |
| "屬性;或許您在屬性名稱中使用了無效的字元" |
| |
| #: glib/gmarkup.c:1383 |
| #, c-format |
| msgid "" |
| "Odd character '%s', expected an open quote mark after the equals sign when " |
| "giving value for attribute '%s' of element '%s'" |
| msgstr "" |
| "不尋常的字元「%s」,當指定屬性「%s」的值(屬於元素「%s」)時,等號後應該出現" |
| "開引號" |
| |
| #: glib/gmarkup.c:1528 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following the characters '</'; '%s' may not " |
| "begin an element name" |
| msgstr "「</」字元後的「%s」不是有效的字元;「%s」不可能是元素名稱的開始部份" |
| |
| #: glib/gmarkup.c:1568 |
| #, c-format |
| msgid "" |
| "'%s' is not a valid character following the close element name '%s'; the " |
| "allowed character is '>'" |
| msgstr "字元「%s」是無效的(位置在關閉元素「%s」末端);允許的字元為「>」" |
| |
| #: glib/gmarkup.c:1579 |
| #, c-format |
| msgid "Element '%s' was closed, no element is currently open" |
| msgstr "元素「%s」已關閉,沒有開啟中的元素" |
| |
| #: glib/gmarkup.c:1588 |
| #, c-format |
| msgid "Element '%s' was closed, but the currently open element is '%s'" |
| msgstr "元素「%s」已關閉,但開啟中的元素是「%s」" |
| |
| #: glib/gmarkup.c:1735 |
| msgid "Document was empty or contained only whitespace" |
| msgstr "文件完全空白或只含有空白字元" |
| |
| #: glib/gmarkup.c:1749 |
| msgid "Document ended unexpectedly just after an open angle bracket '<'" |
| msgstr "文件在尖角括號「<」後突然終止" |
| |
| #: glib/gmarkup.c:1757 glib/gmarkup.c:1801 |
| #, c-format |
| msgid "" |
| "Document ended unexpectedly with elements still open - '%s' was the last " |
| "element opened" |
| msgstr "在仍然有開啟中的元素時,文件突然結束 ─「%s」是最後一個開啟的元素" |
| |
| #: glib/gmarkup.c:1765 |
| #, c-format |
| msgid "" |
| "Document ended unexpectedly, expected to see a close angle bracket ending " |
| "the tag <%s/>" |
| msgstr "文件突然結束,本來應該出現用來關閉標籤 <%s/> 的尖角括號" |
| |
| #: glib/gmarkup.c:1771 |
| msgid "Document ended unexpectedly inside an element name" |
| msgstr "在元素的名稱內,文件突然結束" |
| |
| #: glib/gmarkup.c:1776 |
| msgid "Document ended unexpectedly inside an attribute name" |
| msgstr "在屬性名稱內,文件突然結束" |
| |
| #: glib/gmarkup.c:1781 |
| msgid "Document ended unexpectedly inside an element-opening tag." |
| msgstr "在元素的開啟標籤內,文件突然結束" |
| |
| #: glib/gmarkup.c:1787 |
| msgid "" |
| "Document ended unexpectedly after the equals sign following an attribute " |
| "name; no attribute value" |
| msgstr "在屬性名稱的等號後,文件突然結束;沒有屬性值" |
| |
| #: glib/gmarkup.c:1794 |
| msgid "Document ended unexpectedly while inside an attribute value" |
| msgstr "在屬性值內,文件突然結束" |
| |
| #: glib/gmarkup.c:1809 |
| #, c-format |
| msgid "Document ended unexpectedly inside the close tag for element '%s'" |
| msgstr "在元素「%s」的關閉標籤內,文件突然結束" |
| |
| #: glib/gmarkup.c:1815 |
| msgid "Document ended unexpectedly inside a comment or processing instruction" |
| msgstr "在註解或處理指示內,文件突然結束" |
| |
| #: glib/gshell.c:73 |
| #, c-format |
| msgid "Quoted text doesn't begin with a quotation mark" |
| msgstr "應該用引號括起來的文字不是以括號為開始" |
| |
| #: glib/gshell.c:163 |
| #, c-format |
| msgid "Unmatched quotation mark in command line or other shell-quoted text" |
| msgstr "指令列或其它標為指令的字串內有不對稱的引號" |
| |
| #: glib/gshell.c:541 |
| #, c-format |
| msgid "Text ended just after a '\\' character. (The text was '%s')" |
| msgstr "文字在「\\」字元後就終止了。(文字為「%s」)" |
| |
| #: glib/gshell.c:548 |
| #, c-format |
| msgid "Text ended before matching quote was found for %c. (The text was '%s')" |
| msgstr "字串完結前仍沒有對應於 %c 的引號(字串為「%s」)" |
| |
| #: glib/gshell.c:560 |
| #, c-format |
| msgid "Text was empty (or contained only whitespace)" |
| msgstr "文字是空白的(或只含有空白字元)" |
| |
| #: glib/gspawn-win32.c:276 |
| #, c-format |
| msgid "Failed to read data from child process" |
| msgstr "無法從副進程讀取資料" |
| |
| #: glib/gspawn-win32.c:291 glib/gspawn.c:1364 |
| #, c-format |
| msgid "Failed to create pipe for communicating with child process (%s)" |
| msgstr "無法建立管道來和副進程溝通 (%s)" |
| |
| #: glib/gspawn-win32.c:329 glib/gspawn.c:1028 |
| #, c-format |
| msgid "Failed to read from child pipe (%s)" |
| msgstr "無法從管道讀取資料 (%s)" |
| |
| #: glib/gspawn-win32.c:355 glib/gspawn.c:1233 |
| #, c-format |
| msgid "Failed to change to directory '%s' (%s)" |
| msgstr "無法進入目錄「%s」(%s)" |
| |
| #: glib/gspawn-win32.c:361 glib/gspawn-win32.c:581 |
| #, c-format |
| msgid "Failed to execute child process (%s)" |
| msgstr "無法執行副進程 (%s)" |
| |
| #: glib/gspawn-win32.c:471 glib/gspawn-win32.c:527 |
| #, c-format |
| msgid "Invalid program name: %s" |
| msgstr "程式名稱無效:%s" |
| |
| #: glib/gspawn-win32.c:481 glib/gspawn-win32.c:537 glib/gspawn-win32.c:780 |
| #: glib/gspawn-win32.c:835 glib/gspawn-win32.c:1370 |
| #, c-format |
| msgid "Invalid string in argument vector at %d: %s" |
| msgstr "第 %d 個引數中含無效的字串:%s" |
| |
| #: glib/gspawn-win32.c:492 glib/gspawn-win32.c:548 glib/gspawn-win32.c:794 |
| #: glib/gspawn-win32.c:848 glib/gspawn-win32.c:1403 |
| #, c-format |
| msgid "Invalid string in environment: %s" |
| msgstr "環境變數中的字串無效:%s" |
| |
| #: glib/gspawn-win32.c:776 glib/gspawn-win32.c:831 glib/gspawn-win32.c:1351 |
| #, c-format |
| msgid "Invalid working directory: %s" |
| msgstr "無效的工作目錄:%s" |
| |
| #: glib/gspawn-win32.c:890 |
| #, c-format |
| msgid "Failed to execute helper program (%s)" |
| msgstr "無法執行協助程式 (%s)" |
| |
| #: glib/gspawn-win32.c:1090 |
| #, c-format |
| msgid "" |
| "Unexpected error in g_io_channel_win32_poll() reading data from a child " |
| "process" |
| msgstr "當 g_io_channel_win32_poll() 從副進程讀取資料時發生無法預計的錯誤" |
| |
| #: glib/gspawn.c:168 |
| #, c-format |
| msgid "Failed to read data from child process (%s)" |
| msgstr "無法從副進程讀取資料 (%s)" |
| |
| #: glib/gspawn.c:300 |
| #, c-format |
| msgid "Unexpected error in select() reading data from a child process (%s)" |
| msgstr "當 select() 從副進程讀取資料時發生無法預計的錯誤 (%s)" |
| |
| #: glib/gspawn.c:383 |
| #, c-format |
| msgid "Unexpected error in waitpid() (%s)" |
| msgstr "waitpid() 發生無法預計的錯誤 (%s)" |
| |
| #: glib/gspawn.c:1093 |
| #, c-format |
| msgid "Failed to fork (%s)" |
| msgstr "無法衍生進程 (%s)" |
| |
| #: glib/gspawn.c:1243 |
| #, c-format |
| msgid "Failed to execute child process \"%s\" (%s)" |
| msgstr "無法執行副進程“%s”(%s)" |
| |
| #: glib/gspawn.c:1253 |
| #, c-format |
| msgid "Failed to redirect output or input of child process (%s)" |
| msgstr "無法將副進程的輸出或輸入重新導向 (%s)" |
| |
| #: glib/gspawn.c:1262 |
| #, c-format |
| msgid "Failed to fork child process (%s)" |
| msgstr "無法衍生副進程 (%s)" |
| |
| #: glib/gspawn.c:1270 |
| #, c-format |
| msgid "Unknown error executing child process \"%s\"" |
| msgstr "執行副進程“%s”時發生不明的錯誤" |
| |
| #: glib/gspawn.c:1292 |
| #, c-format |
| msgid "Failed to read enough data from child pid pipe (%s)" |
| msgstr "無法從 child pid pipe 讀取足夠的資料 (%s)" |
| |
| #: glib/gutf8.c:1017 |
| #, c-format |
| msgid "Character out of range for UTF-8" |
| msgstr "字元不在 UTF-8 範圍之內" |
| |
| #: glib/gutf8.c:1111 glib/gutf8.c:1120 glib/gutf8.c:1252 glib/gutf8.c:1261 |
| #: glib/gutf8.c:1402 glib/gutf8.c:1498 |
| #, c-format |
| msgid "Invalid sequence in conversion input" |
| msgstr "轉換輸入資料時出現無效的字元次序" |
| |
| #: glib/gutf8.c:1413 glib/gutf8.c:1509 |
| #, c-format |
| msgid "Character out of range for UTF-16" |
| msgstr "字元不在 UTF-16 範圍之內" |
| |
| #: glib/goption.c:468 |
| msgid "Usage:" |
| msgstr "用法:" |
| |
| #: glib/goption.c:468 |
| msgid "[OPTION...]" |
| msgstr "[選項...]" |
| |
| #: glib/goption.c:556 |
| msgid "Help Options:" |
| msgstr "說明選項:" |
| |
| #: glib/goption.c:557 |
| msgid "Show help options" |
| msgstr "顯示說明的選項" |
| |
| #: glib/goption.c:562 |
| msgid "Show all help options" |
| msgstr "顯示所有的說明選項" |
| |
| #: glib/goption.c:612 |
| msgid "Application Options:" |
| msgstr "應用程式選項:" |
| |
| #: glib/goption.c:653 |
| #, c-format |
| msgid "Cannot parse integer value '%s' for %s" |
| msgstr "無法給 %2$s 解析整數值「%1$s」" |
| |
| #: glib/goption.c:663 |
| #, c-format |
| msgid "Integer value '%s' for %s out of range" |
| msgstr "%2$s 的整數值「%1$s」超出範圍" |
| |
| #: glib/goption.c:926 |
| #, c-format |
| msgid "Error parsing option %s" |
| msgstr "解析 %s 選項時發生錯誤" |
| |
| #: glib/goption.c:959 glib/goption.c:1070 |
| #, c-format |
| msgid "Missing argument for %s" |
| msgstr "缺少 %s 的參數" |
| |
| #: glib/goption.c:1474 |
| #, c-format |
| msgid "Unknown option %s" |
| msgstr "未知的選項 %s" |
| |
| #: glib/gkeyfile.c:339 |
| #, c-format |
| msgid "Valid key file could not be found in data dirs" |
| msgstr "在資料目錄中找不到有效的設定鍵檔案" |
| |
| #: glib/gkeyfile.c:374 |
| #, c-format |
| msgid "Not a regular file" |
| msgstr "不是普通檔案" |
| |
| #: glib/gkeyfile.c:382 |
| #, c-format |
| msgid "File is empty" |
| msgstr "檔案是空的" |
| |
| #: glib/gkeyfile.c:697 |
| #, c-format |
| msgid "" |
| "Key file contains line '%s' which is not a key-value pair, group, or comment" |
| msgstr "設定鍵檔案中「%s」行並非設定鍵值配對、群組或註解" |
| |
| #: glib/gkeyfile.c:765 |
| #, c-format |
| msgid "Key file does not start with a group" |
| msgstr "設定鍵檔案並非以群組開頭" |
| |
| #: glib/gkeyfile.c:808 |
| #, c-format |
| msgid "Key file contains unsupported encoding '%s'" |
| msgstr "設定鍵檔案包含不支援的編碼「%s」" |
| |
| #: glib/gkeyfile.c:1017 glib/gkeyfile.c:1176 glib/gkeyfile.c:2177 |
| #: glib/gkeyfile.c:2242 glib/gkeyfile.c:2361 glib/gkeyfile.c:2497 |
| #: glib/gkeyfile.c:2649 glib/gkeyfile.c:2823 glib/gkeyfile.c:2880 |
| #, c-format |
| msgid "Key file does not have group '%s'" |
| msgstr "設定鍵檔案沒有群組「%s」" |
| |
| #: glib/gkeyfile.c:1188 |
| #, c-format |
| msgid "Key file does not have key '%s'" |
| msgstr "設定鍵檔案沒有設定鍵「%s」" |
| |
| #: glib/gkeyfile.c:1289 glib/gkeyfile.c:1398 |
| #, c-format |
| msgid "Key file contains key '%s' with value '%s' which is not UTF-8" |
| msgstr "設定鍵檔案包含的設定鍵「%s」(數值為「%s」)並非 UTF-8" |
| |
| #: glib/gkeyfile.c:1307 glib/gkeyfile.c:1416 glib/gkeyfile.c:1788 |
| #, c-format |
| msgid "Key file contains key '%s' which has value that cannot be interpreted." |
| msgstr "設定鍵檔案包含的設定鍵「%s」的數值無法解譯。" |
| |
| #: glib/gkeyfile.c:2004 |
| #, c-format |
| msgid "" |
| "Key file contains key '%s' in group '%s' which has value that cannot be " |
| "interpreted." |
| msgstr "設定鍵檔案包含的群組「%2$s」中設定鍵「%1$s」數值無法解譯" |
| |
| #: glib/gkeyfile.c:2192 glib/gkeyfile.c:2376 glib/gkeyfile.c:2891 |
| #, c-format |
| msgid "Key file does not have key '%s' in group '%s'" |
| msgstr "設定鍵檔案的群組「%2$s」中沒有設定鍵「%1$s」" |
| |
| #: glib/gkeyfile.c:3067 |
| #, c-format |
| msgid "Key file contains escape character at end of line" |
| msgstr "設定鍵檔案在行尾包含跳出字元" |
| |
| #: glib/gkeyfile.c:3089 |
| #, c-format |
| msgid "Key file contains invalid escape sequence '%s'" |
| msgstr "設定鍵檔案含有不正確的「跳出字元」「%s」" |
| |
| #: glib/gkeyfile.c:3230 |
| #, c-format |
| msgid "Value '%s' cannot be interpreted as a number." |
| msgstr "數值「%s」不能被解譯為數字。" |
| |
| #: glib/gkeyfile.c:3240 |
| #, c-format |
| msgid "Integer value '%s' out of range" |
| msgstr "整數值「%s」超出範圍" |
| |
| #: glib/gkeyfile.c:3270 |
| #, c-format |
| msgid "Value '%s' cannot be interpreted as a boolean." |
| msgstr "數值「%s」不能被解譯為邏輯值。" |