| # |
| # This is the main Apache HTTP server configuration file. It contains the |
| # configuration directives that give the server its instructions. |
| # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information. |
| # In particular, see |
| # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html> |
| # for a discussion of each configuration directive. |
| # |
| # Do NOT simply read the instructions in here without understanding |
| # what they do. They're here only as hints or reminders. If you are unsure |
| # consult the online docs. You have been warned. |
| # |
| # Configuration and logfile names: If the filenames you specify for many |
| # of the server's control files begin with "/" (or "drive:/" for Win32), the |
| # server will use that explicit path. If the filenames do *not* begin |
| # with "/", the value of ServerRoot is prepended -- so "logs/access_log" |
| # with ServerRoot set to "/usr/local/apache2" will be interpreted by the |
| # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" |
| # will be interpreted as '/logs/access_log'. |
| |
| # |
| # ServerRoot: The top of the directory tree under which the server's |
| # configuration, error, and log files are kept. |
| # |
| # Do not add a slash at the end of the directory path. If you point |
| # ServerRoot at a non-local disk, be sure to specify a local disk on the |
| # Mutex directive, if file-based mutexes are used. If you wish to share the |
| # same ServerRoot for multiple httpd daemons, you will need to change at |
| # least PidFile. |
| # |
| ServerRoot "/usr/local/apache2" |
| |
| # |
| # Mutex: Allows you to set the mutex mechanism and mutex file directory |
| # for individual mutexes, or change the global defaults |
| # |
| # Uncomment and change the directory if mutexes are file-based and the default |
| # mutex file directory is not on a local disk or is not appropriate for some |
| # other reason. |
| # |
| # Mutex default:logs |
| |
| # |
| # Listen: Allows you to bind Apache to specific IP addresses and/or |
| # ports, instead of the default. See also the <VirtualHost> |
| # directive. |
| # |
| # Change this to Listen on specific IP addresses as shown below to |
| # prevent Apache from glomming onto all bound IP addresses. |
| # |
| #Listen 12.34.56.78:80 |
| Listen 80 |
| |
| # |
| # Dynamic Shared Object (DSO) Support |
| # |
| # To be able to use the functionality of a module which was built as a DSO you |
| # have to place corresponding `LoadModule' lines at this location so the |
| # directives contained in it are actually available _before_ they are used. |
| # Statically compiled modules (those listed by `httpd -l') do not need |
| # to be loaded here. |
| # |
| # Example: |
| # LoadModule foo_module modules/mod_foo.so |
| # |
| LoadModule authn_file_module modules/mod_authn_file.so |
| #LoadModule authn_dbm_module modules/mod_authn_dbm.so |
| #LoadModule authn_anon_module modules/mod_authn_anon.so |
| #LoadModule authn_dbd_module modules/mod_authn_dbd.so |
| #LoadModule authn_socache_module modules/mod_authn_socache.so |
| LoadModule authn_core_module modules/mod_authn_core.so |
| LoadModule authz_host_module modules/mod_authz_host.so |
| LoadModule authz_groupfile_module modules/mod_authz_groupfile.so |
| LoadModule authz_user_module modules/mod_authz_user.so |
| #LoadModule authz_dbm_module modules/mod_authz_dbm.so |
| #LoadModule authz_owner_module modules/mod_authz_owner.so |
| #LoadModule authz_dbd_module modules/mod_authz_dbd.so |
| LoadModule authz_core_module modules/mod_authz_core.so |
| #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so |
| #LoadModule authnz_fcgi_module modules/mod_authnz_fcgi.so |
| LoadModule access_compat_module modules/mod_access_compat.so |
| LoadModule auth_basic_module modules/mod_auth_basic.so |
| #LoadModule auth_form_module modules/mod_auth_form.so |
| LoadModule auth_digest_module modules/mod_auth_digest.so |
| #LoadModule allowmethods_module modules/mod_allowmethods.so |
| #LoadModule isapi_module modules/mod_isapi.so |
| #LoadModule file_cache_module modules/mod_file_cache.so |
| #LoadModule cache_module modules/mod_cache.so |
| #LoadModule cache_disk_module modules/mod_cache_disk.so |
| #LoadModule cache_socache_module modules/mod_cache_socache.so |
| #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so |
| #LoadModule socache_dbm_module modules/mod_socache_dbm.so |
| #LoadModule socache_memcache_module modules/mod_socache_memcache.so |
| #LoadModule watchdog_module modules/mod_watchdog.so |
| #LoadModule macro_module modules/mod_macro.so |
| #LoadModule dbd_module modules/mod_dbd.so |
| #LoadModule bucketeer_module modules/mod_bucketeer.so |
| #LoadModule dumpio_module modules/mod_dumpio.so |
| #LoadModule echo_module modules/mod_echo.so |
| #LoadModule example_hooks_module modules/mod_example_hooks.so |
| #LoadModule case_filter_module modules/mod_case_filter.so |
| #LoadModule case_filter_in_module modules/mod_case_filter_in.so |
| #LoadModule example_ipc_module modules/mod_example_ipc.so |
| #LoadModule buffer_module modules/mod_buffer.so |
| #LoadModule data_module modules/mod_data.so |
| #LoadModule ratelimit_module modules/mod_ratelimit.so |
| LoadModule reqtimeout_module modules/mod_reqtimeout.so |
| #LoadModule ext_filter_module modules/mod_ext_filter.so |
| #LoadModule request_module modules/mod_request.so |
| #LoadModule include_module modules/mod_include.so |
| LoadModule filter_module modules/mod_filter.so |
| #LoadModule reflector_module modules/mod_reflector.so |
| #LoadModule substitute_module modules/mod_substitute.so |
| #LoadModule sed_module modules/mod_sed.so |
| #LoadModule charset_lite_module modules/mod_charset_lite.so |
| #LoadModule deflate_module modules/mod_deflate.so |
| #LoadModule xml2enc_module modules/mod_xml2enc.so |
| #LoadModule proxy_html_module modules/mod_proxy_html.so |
| LoadModule mime_module modules/mod_mime.so |
| #LoadModule ldap_module modules/mod_ldap.so |
| LoadModule log_config_module modules/mod_log_config.so |
| #LoadModule log_debug_module modules/mod_log_debug.so |
| #LoadModule log_forensic_module modules/mod_log_forensic.so |
| #LoadModule logio_module modules/mod_logio.so |
| #LoadModule lua_module modules/mod_lua.so |
| LoadModule env_module modules/mod_env.so |
| #LoadModule mime_magic_module modules/mod_mime_magic.so |
| #LoadModule cern_meta_module modules/mod_cern_meta.so |
| #LoadModule expires_module modules/mod_expires.so |
| LoadModule headers_module modules/mod_headers.so |
| #LoadModule ident_module modules/mod_ident.so |
| #LoadModule usertrack_module modules/mod_usertrack.so |
| #LoadModule unique_id_module modules/mod_unique_id.so |
| LoadModule setenvif_module modules/mod_setenvif.so |
| LoadModule version_module modules/mod_version.so |
| #LoadModule remoteip_module modules/mod_remoteip.so |
| #LoadModule proxy_module modules/mod_proxy.so |
| #LoadModule proxy_connect_module modules/mod_proxy_connect.so |
| #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so |
| #LoadModule proxy_http_module modules/mod_proxy_http.so |
| #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so |
| #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so |
| #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so |
| #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so |
| #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so |
| #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so |
| #LoadModule proxy_express_module modules/mod_proxy_express.so |
| #LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so |
| #LoadModule session_module modules/mod_session.so |
| #LoadModule session_cookie_module modules/mod_session_cookie.so |
| #LoadModule session_crypto_module modules/mod_session_crypto.so |
| #LoadModule session_dbd_module modules/mod_session_dbd.so |
| #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so |
| #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so |
| #LoadModule ssl_module modules/mod_ssl.so |
| #LoadModule optional_hook_export_module modules/mod_optional_hook_export.so |
| #LoadModule optional_hook_import_module modules/mod_optional_hook_import.so |
| #LoadModule optional_fn_import_module modules/mod_optional_fn_import.so |
| #LoadModule optional_fn_export_module modules/mod_optional_fn_export.so |
| #LoadModule dialup_module modules/mod_dialup.so |
| #LoadModule http2_module modules/mod_http2.so |
| #LoadModule proxy_http2_module modules/mod_proxy_http2.so |
| #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so |
| #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so |
| #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so |
| #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so |
| LoadModule unixd_module modules/mod_unixd.so |
| #LoadModule heartbeat_module modules/mod_heartbeat.so |
| #LoadModule heartmonitor_module modules/mod_heartmonitor.so |
| #LoadModule dav_module modules/mod_dav.so |
| LoadModule status_module modules/mod_status.so |
| LoadModule autoindex_module modules/mod_autoindex.so |
| #LoadModule asis_module modules/mod_asis.so |
| #LoadModule info_module modules/mod_info.so |
| #LoadModule suexec_module modules/mod_suexec.so |
| <IfModule !mpm_prefork_module> |
| #LoadModule cgid_module modules/mod_cgid.so |
| </IfModule> |
| <IfModule mpm_prefork_module> |
| #LoadModule cgi_module modules/mod_cgi.so |
| </IfModule> |
| #LoadModule dav_fs_module modules/mod_dav_fs.so |
| #LoadModule dav_lock_module modules/mod_dav_lock.so |
| #LoadModule vhost_alias_module modules/mod_vhost_alias.so |
| #LoadModule negotiation_module modules/mod_negotiation.so |
| LoadModule dir_module modules/mod_dir.so |
| #LoadModule imagemap_module modules/mod_imagemap.so |
| #LoadModule actions_module modules/mod_actions.so |
| #LoadModule speling_module modules/mod_speling.so |
| #LoadModule userdir_module modules/mod_userdir.so |
| LoadModule alias_module modules/mod_alias.so |
| #LoadModule rewrite_module modules/mod_rewrite.so |
| |
| <IfModule unixd_module> |
| # |
| # If you wish httpd to run as a different user or group, you must run |
| # httpd as root initially and it will switch. |
| # |
| # User/Group: The name (or #number) of the user/group to run httpd as. |
| # It is usually good practice to create a dedicated user and group for |
| # running httpd, as with most system services. |
| # |
| User daemon |
| Group daemon |
| |
| </IfModule> |
| |
| # 'Main' server configuration |
| # |
| # The directives in this section set up the values used by the 'main' |
| # server, which responds to any requests that aren't handled by a |
| # <VirtualHost> definition. These values also provide defaults for |
| # any <VirtualHost> containers you may define later in the file. |
| # |
| # All of these directives may appear inside <VirtualHost> containers, |
| # in which case these default settings will be overridden for the |
| # virtual host being defined. |
| # |
| |
| # |
| # ServerAdmin: Your address, where problems with the server should be |
| # e-mailed. This address appears on some server-generated pages, such |
| # as error documents. e.g. admin@your-domain.com |
| # |
| ServerAdmin you@example.com |
| |
| # |
| # ServerName gives the name and port that the server uses to identify itself. |
| # This can often be determined automatically, but we recommend you specify |
| # it explicitly to prevent problems during startup. |
| # |
| # If your host doesn't have a registered DNS name, enter its IP address here. |
| # |
| #ServerName www.example.com:80 |
| |
| # |
| # Deny access to the entirety of your server's filesystem. You must |
| # explicitly permit access to web content directories in other |
| # <Directory> blocks below. |
| # |
| <Directory /> |
| AllowOverride none |
| Require all denied |
| </Directory> |
| |
| # |
| # Note that from this point forward you must specifically allow |
| # particular features to be enabled - so if something's not working as |
| # you might expect, make sure that you have specifically enabled it |
| # below. |
| # |
| |
| # |
| # DocumentRoot: The directory out of which you will serve your |
| # documents. By default, all requests are taken from this directory, but |
| # symbolic links and aliases may be used to point to other locations. |
| # |
| DocumentRoot "/usr/local/apache2/htdocs" |
| <Directory "/usr/local/apache2/htdocs"> |
| # |
| # Possible values for the Options directive are "None", "All", |
| # or any combination of: |
| # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews |
| # |
| # Note that "MultiViews" must be named *explicitly* --- "Options All" |
| # doesn't give it to you. |
| # |
| # The Options directive is both complicated and important. Please see |
| # http://httpd.apache.org/docs/2.4/mod/core.html#options |
| # for more information. |
| # |
| Options Indexes FollowSymLinks |
| |
| # |
| # AllowOverride controls what directives may be placed in .htaccess files. |
| # It can be "All", "None", or any combination of the keywords: |
| # AllowOverride FileInfo AuthConfig Limit |
| # |
| AllowOverride None |
| |
| # |
| # Controls who can get stuff from this server. |
| # |
| Require all granted |
| </Directory> |
| |
| # |
| # DirectoryIndex: sets the file that Apache will serve if a directory |
| # is requested. |
| # |
| <IfModule dir_module> |
| DirectoryIndex index.html |
| </IfModule> |
| |
| # |
| # The following lines prevent .htaccess and .htpasswd files from being |
| # viewed by Web clients. |
| # |
| <Files ".ht*"> |
| Require all denied |
| </Files> |
| |
| # |
| # ErrorLog: The location of the error log file. |
| # If you do not specify an ErrorLog directive within a <VirtualHost> |
| # container, error messages relating to that virtual host will be |
| # logged here. If you *do* define an error logfile for a <VirtualHost> |
| # container, that host's errors will be logged there and not here. |
| # |
| ErrorLog /proc/self/fd/2 |
| |
| # |
| # LogLevel: Control the number of messages logged to the error_log. |
| # Possible values include: debug, info, notice, warn, error, crit, |
| # alert, emerg. |
| # |
| LogLevel warn |
| |
| <IfModule log_config_module> |
| # |
| # The following directives define some format nicknames for use with |
| # a CustomLog directive (see below). |
| # |
| LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined |
| LogFormat "%h %l %u %t \"%r\" %>s %b" common |
| |
| <IfModule logio_module> |
| # You need to enable mod_logio.c to use %I and %O |
| LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio |
| </IfModule> |
| |
| # |
| # The location and format of the access logfile (Common Logfile Format). |
| # If you do not define any access logfiles within a <VirtualHost> |
| # container, they will be logged here. Contrariwise, if you *do* |
| # define per-<VirtualHost> access logfiles, transactions will be |
| # logged therein and *not* in this file. |
| # |
| CustomLog /proc/self/fd/1 common |
| |
| # |
| # If you prefer a logfile with access, agent, and referer information |
| # (Combined Logfile Format) you can use the following directive. |
| # |
| #CustomLog "logs/access_log" combined |
| </IfModule> |
| |
| <IfModule alias_module> |
| # |
| # Redirect: Allows you to tell clients about documents that used to |
| # exist in your server's namespace, but do not anymore. The client |
| # will make a new request for the document at its new location. |
| # Example: |
| # Redirect permanent /foo http://www.example.com/bar |
| |
| # |
| # Alias: Maps web paths into filesystem paths and is used to |
| # access content that does not live under the DocumentRoot. |
| # Example: |
| # Alias /webpath /full/filesystem/path |
| # |
| # If you include a trailing / on /webpath then the server will |
| # require it to be present in the URL. You will also likely |
| # need to provide a <Directory> section to allow access to |
| # the filesystem path. |
| |
| # |
| # ScriptAlias: This controls which directories contain server scripts. |
| # ScriptAliases are essentially the same as Aliases, except that |
| # documents in the target directory are treated as applications and |
| # run by the server when requested rather than as documents sent to the |
| # client. The same rules about trailing "/" apply to ScriptAlias |
| # directives as to Alias. |
| # |
| ScriptAlias /cgi-bin/ "/usr/local/apache2/cgi-bin/" |
| |
| </IfModule> |
| |
| <IfModule cgid_module> |
| # |
| # ScriptSock: On threaded servers, designate the path to the UNIX |
| # socket used to communicate with the CGI daemon of mod_cgid. |
| # |
| #Scriptsock cgisock |
| </IfModule> |
| |
| # |
| # "/usr/local/apache2/cgi-bin" should be changed to whatever your ScriptAliased |
| # CGI directory exists, if you have that configured. |
| # |
| <Directory "/usr/local/apache2/cgi-bin"> |
| AllowOverride None |
| Options None |
| Require all granted |
| </Directory> |
| |
| <IfModule headers_module> |
| # |
| # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied |
| # backend servers which have lingering "httpoxy" defects. |
| # 'Proxy' request header is undefined by the IETF, not listed by IANA |
| # |
| RequestHeader unset Proxy early |
| </IfModule> |
| |
| <IfModule mime_module> |
| # |
| # TypesConfig points to the file containing the list of mappings from |
| # filename extension to MIME-type. |
| # |
| TypesConfig conf/mime.types |
| |
| # |
| # AddType allows you to add to or override the MIME configuration |
| # file specified in TypesConfig for specific file types. |
| # |
| #AddType application/x-gzip .tgz |
| # |
| # AddEncoding allows you to have certain browsers uncompress |
| # information on the fly. Note: Not all browsers support this. |
| # |
| #AddEncoding x-compress .Z |
| #AddEncoding x-gzip .gz .tgz |
| # |
| # If the AddEncoding directives above are commented-out, then you |
| # probably should define those extensions to indicate media types: |
| # |
| AddType application/x-compress .Z |
| AddType application/x-gzip .gz .tgz |
| |
| # |
| # AddHandler allows you to map certain file extensions to "handlers": |
| # actions unrelated to filetype. These can be either built into the server |
| # or added with the Action directive (see below) |
| # |
| # To use CGI scripts outside of ScriptAliased directories: |
| # (You will also need to add "ExecCGI" to the "Options" directive.) |
| # |
| #AddHandler cgi-script .cgi |
| |
| # For type maps (negotiated resources): |
| #AddHandler type-map var |
| |
| # |
| # Filters allow you to process content before it is sent to the client. |
| # |
| # To parse .shtml files for server-side includes (SSI): |
| # (You will also need to add "Includes" to the "Options" directive.) |
| # |
| #AddType text/html .shtml |
| #AddOutputFilter INCLUDES .shtml |
| </IfModule> |
| |
| # |
| # The mod_mime_magic module allows the server to use various hints from the |
| # contents of the file itself to determine its type. The MIMEMagicFile |
| # directive tells the module where the hint definitions are located. |
| # |
| #MIMEMagicFile conf/magic |
| |
| # |
| # Customizable error responses come in three flavors: |
| # 1) plain text 2) local redirects 3) external redirects |
| # |
| # Some examples: |
| #ErrorDocument 500 "The server made a boo boo." |
| #ErrorDocument 404 /missing.html |
| #ErrorDocument 404 "/cgi-bin/missing_handler.pl" |
| #ErrorDocument 402 http://www.example.com/subscription_info.html |
| # |
| |
| # |
| # MaxRanges: Maximum number of Ranges in a request before |
| # returning the entire resource, or one of the special |
| # values 'default', 'none' or 'unlimited'. |
| # Default setting is to accept 200 Ranges. |
| #MaxRanges unlimited |
| |
| # |
| # EnableMMAP and EnableSendfile: On systems that support it, |
| # memory-mapping or the sendfile syscall may be used to deliver |
| # files. This usually improves server performance, but must |
| # be turned off when serving from networked-mounted |
| # filesystems or if support for these functions is otherwise |
| # broken on your system. |
| # Defaults: EnableMMAP On, EnableSendfile Off |
| # |
| #EnableMMAP off |
| #EnableSendfile on |
| |
| # Supplemental configuration |
| # |
| # The configuration files in the conf/extra/ directory can be |
| # included to add extra features or to modify the default configuration of |
| # the server, or you may simply copy their contents here and change as |
| # necessary. |
| |
| # Server-pool management (MPM specific) |
| #Include conf/extra/httpd-mpm.conf |
| |
| # Multi-language error messages |
| #Include conf/extra/httpd-multilang-errordoc.conf |
| |
| # Fancy directory listings |
| #Include conf/extra/httpd-autoindex.conf |
| |
| # Language settings |
| #Include conf/extra/httpd-languages.conf |
| |
| # User home directories |
| #Include conf/extra/httpd-userdir.conf |
| |
| # Real-time info on requests and configuration |
| #Include conf/extra/httpd-info.conf |
| |
| # Virtual hosts |
| #Include conf/extra/httpd-vhosts.conf |
| |
| # Local access to the Apache HTTP Server Manual |
| #Include conf/extra/httpd-manual.conf |
| |
| # Distributed authoring and versioning (WebDAV) |
| #Include conf/extra/httpd-dav.conf |
| |
| # Various default settings |
| #Include conf/extra/httpd-default.conf |
| |
| # Configure mod_proxy_html to understand HTML4/XHTML1 |
| <IfModule proxy_html_module> |
| Include conf/extra/proxy-html.conf |
| </IfModule> |
| |
| # Secure (SSL/TLS) connections |
| #Include conf/extra/httpd-ssl.conf |
| # |
| # Note: The following must must be present to support |
| # starting without SSL on platforms with no /dev/random equivalent |
| # but a statically compiled-in mod_ssl. |
| # |
| <IfModule ssl_module> |
| SSLRandomSeed startup builtin |
| SSLRandomSeed connect builtin |
| </IfModule> |
| |
| |
| <Location "/"> |
| AuthType Digest |
| AuthName "Private" |
| AuthDigestDomain / |
| AuthDigestProvider file |
| AuthUserFile "/usr/local/apache2/conf/.htdigest" |
| Require valid-user |
| </Location> |