src/tss2-esys/api/Esys_ContextLoad.c

/* SPDX-License-Identifier: BSD-2-Clause */
/*******************************************************************************
 * Copyright 2017-2018, Fraunhofer SIT sponsored by Infineon Technologies AG
 * All rights reserved.
 ******************************************************************************/

#ifdef HAVE_CONFIG_H
#include <config.h>
#endif

#include "tss2_mu.h"
#include "tss2_sys.h"
#include "tss2_esys.h"

#include "esys_types.h"
#include "esys_iutil.h"
#include "esys_mu.h"
#define LOGMODULE esys
#include "util/log.h"
#include "util/aux_util.h"

/** Store command parameters inside the ESYS_CONTEXT for use during _Finish */
static void store_input_parameters (
    ESYS_CONTEXT *esysContext,
    const TPMS_CONTEXT *context)
{
    if (context == NULL) {
        esysContext->in.ContextLoad.context = NULL;
    } else {
        esysContext->in.ContextLoad.contextData = *context;
        esysContext->in.ContextLoad.context =
            &esysContext->in.ContextLoad.contextData;
    }
}

/** One-Call function for TPM2_ContextLoad
 *
 * This function invokes the TPM2_ContextLoad command in a one-call
 * variant. This means the function will block until the TPM response is
 * available. All input parameters are const. The memory for non-simple output
 * parameters is allocated by the function implementation.
 *
 * @param[in,out] esysContext The ESYS_CONTEXT.
 * @param[in]  context The context blob.
 * @param[out] loadedHandle  ESYS_TR handle of ESYS resource for TPMI_DH_CONTEXT.
 * @retval TSS2_RC_SUCCESS if the function call was a success.
 * @retval TSS2_ESYS_RC_BAD_REFERENCE if the esysContext or required input
 *         pointers or required output handle references are NULL.
 * @retval TSS2_ESYS_RC_BAD_CONTEXT: if esysContext corruption is detected.
 * @retval TSS2_ESYS_RC_MEMORY: if the ESAPI cannot allocate enough memory for
 *         internal operations or return parameters.
 * @retval TSS2_ESYS_RC_BAD_SEQUENCE: if the context has an asynchronous
 *         operation already pending.
 * @retval TSS2_ESYS_RC_INSUFFICIENT_RESPONSE: if the TPM's response does not
 *          at least contain the tag, response length, and response code.
 * @retval TSS2_ESYS_RC_MALFORMED_RESPONSE: if the TPM's response is corrupted.
 * @retval TSS2_ESYS_RC_RSP_AUTH_FAILED: if the response HMAC from the TPM
           did not verify.
 * @retval TSS2_RCs produced by lower layers of the software stack may be
 *         returned to the caller unaltered unless handled internally.
 */
TSS2_RC
Esys_ContextLoad(
    ESYS_CONTEXT *esysContext,
    const TPMS_CONTEXT *context, ESYS_TR *loadedHandle)
{
    TSS2_RC r;

    r = Esys_ContextLoad_Async(esysContext, context);
    return_if_error(r, "Error in async function");

    /* Set the timeout to indefinite for now, since we want _Finish to block */
    int32_t timeouttmp = esysContext->timeout;
    esysContext->timeout = -1;
    /*
     * Now we call the finish function, until return code is not equal to
     * from TSS2_BASE_RC_TRY_AGAIN.
     * Note that the finish function may return TSS2_RC_TRY_AGAIN, even if we
     * have set the timeout to -1. This occurs for example if the TPM requests
     * a retransmission of the command via TPM2_RC_YIELDED.
     */
    do {
        r = Esys_ContextLoad_Finish(esysContext, loadedHandle);
        /* This is just debug information about the reattempt to finish the
           command */
        if (base_rc(r) == TSS2_BASE_RC_TRY_AGAIN)
            LOG_DEBUG("A layer below returned TRY_AGAIN: %" PRIx32
                      " => resubmitting command", r);
    } while (base_rc(r) == TSS2_BASE_RC_TRY_AGAIN);

    /* Restore the timeout value to the original value */
    esysContext->timeout = timeouttmp;
    return_if_error(r, "Esys Finish");

    return TSS2_RC_SUCCESS;
}

/** Asynchronous function for TPM2_ContextLoad
 *
 * This function invokes the TPM2_ContextLoad command in a asynchronous
 * variant. This means the function will return as soon as the command has been
 * sent downwards the stack to the TPM. All input parameters are const.
 * In order to retrieve the TPM's response call Esys_ContextLoad_Finish.
 *
 * @param[in,out] esysContext The ESYS_CONTEXT.
 * @param[in]  context The context blob.
 * @retval ESYS_RC_SUCCESS if the function call was a success.
 * @retval TSS2_ESYS_RC_BAD_REFERENCE if the esysContext or required input
 *         pointers or required output handle references are NULL.
 * @retval TSS2_ESYS_RC_BAD_CONTEXT: if esysContext corruption is detected.
 * @retval TSS2_ESYS_RC_MEMORY: if the ESAPI cannot allocate enough memory for
 *         internal operations or return parameters.
 * @retval TSS2_RCs produced by lower layers of the software stack may be
           returned to the caller unaltered unless handled internally.
 */
TSS2_RC
Esys_ContextLoad_Async(
    ESYS_CONTEXT *esysContext,
    const TPMS_CONTEXT *context)
{
    TSS2_RC r;
    LOG_TRACE("context=%p, context=%p",
              esysContext, context);
    IESYS_CONTEXT_DATA esyscontextData;
    TPMS_CONTEXT tpmContext;

    /* Check context, sequence correctness and set state to error for now */
    if (esysContext == NULL) {
        LOG_ERROR("esyscontext is NULL.");
        return TSS2_ESYS_RC_BAD_REFERENCE;
    }
    r = iesys_check_sequence_async(esysContext);
    if (r != TSS2_RC_SUCCESS)
        return r;
    esysContext->state = _ESYS_STATE_INTERNALERROR;
    store_input_parameters(esysContext, context);
    size_t offset = 0;

    /*
     * ESYS Special Handling Code: The context was extended with metadata during
     * Esys_ContextSave. Here we extract the TPM-parts to pass then to the TPM.
     */
    if (context == NULL) {
        LOG_ERROR("context is NULL.");
        return TSS2_ESYS_RC_BAD_REFERENCE;
    }
    r = iesys_MU_IESYS_CONTEXT_DATA_Unmarshal (&context->contextBlob.buffer[0],
                                               context->contextBlob.size,
                                               &offset, &esyscontextData);
    return_if_error(r, "while unmarshaling context ");

    /* The actual contextBlob for the TPM is embedded inside the
       ESYS_CONTEXT_DATA. Some of the values at the start of TPMS_CONTEXT
       need to be kept though. */

    tpmContext.sequence = context->sequence;
    tpmContext.savedHandle = context->savedHandle;
    tpmContext.hierarchy = context->hierarchy;
    tpmContext.contextBlob = esyscontextData.tpmContext;

    /* Now we override the context parameter with the corrected version, since
       it is nowhere used beyond this point. */
    context = &tpmContext;


    /* Initial invocation of SAPI to prepare the command buffer with parameters */
    r = Tss2_Sys_ContextLoad_Prepare(esysContext->sys, context);
    return_state_if_error(r, _ESYS_STATE_INIT, "SAPI Prepare returned error.");
    /* Trigger execution and finish the async invocation */
    r = Tss2_Sys_ExecuteAsync(esysContext->sys);
    return_state_if_error(r, _ESYS_STATE_INTERNALERROR,
                          "Finish (Execute Async)");

    esysContext->state = _ESYS_STATE_SENT;

    return r;
}

/** Asynchronous finish function for TPM2_ContextLoad
 *
 * This function returns the results of a TPM2_ContextLoad command
 * invoked via Esys_ContextLoad_Finish. All non-simple output parameters
 * are allocated by the function's implementation. NULL can be passed for every
 * output parameter if the value is not required.
 *
 * @param[in,out] esysContext The ESYS_CONTEXT.
 * @param[out] loadedHandle  ESYS_TR handle of ESYS resource for TPMI_DH_CONTEXT.
 * @retval TSS2_RC_SUCCESS on success
 * @retval ESYS_RC_SUCCESS if the function call was a success.
 * @retval TSS2_ESYS_RC_BAD_REFERENCE if the esysContext or required input
 *         pointers or required output handle references are NULL.
 * @retval TSS2_ESYS_RC_BAD_CONTEXT: if esysContext corruption is detected.
 * @retval TSS2_ESYS_RC_MEMORY: if the ESAPI cannot allocate enough memory for
 *         internal operations or return parameters.
 * @retval TSS2_ESYS_RC_BAD_SEQUENCE: if the context has an asynchronous
 *         operation already pending.
 * @retval TSS2_ESYS_RC_TRY_AGAIN: if the timeout counter expires before the
 *         TPM response is received.
 * @retval TSS2_ESYS_RC_INSUFFICIENT_RESPONSE: if the TPM's response does not
 *         at least contain the tag, response length, and response code.
 * @retval TSS2_ESYS_RC_RSP_AUTH_FAILED: if the response HMAC from the TPM did
 *         not verify.
 * @retval TSS2_ESYS_RC_MALFORMED_RESPONSE: if the TPM's response is corrupted.
 * @retval TSS2_RCs produced by lower layers of the software stack may be
 *         returned to the caller unaltered unless handled internally.
 */
TSS2_RC
Esys_ContextLoad_Finish(
    ESYS_CONTEXT *esysContext, ESYS_TR *loadedHandle)
{
    TSS2_RC r;
    LOG_TRACE("context=%p, loadedHandle=%p",
              esysContext, loadedHandle);

    if (esysContext == NULL) {
        LOG_ERROR("esyscontext is NULL.");
        return TSS2_ESYS_RC_BAD_REFERENCE;
    }

    /* Check for correct sequence and set sequence to irregular for now */
    if (esysContext->state != _ESYS_STATE_SENT &&
        esysContext->state != _ESYS_STATE_RESUBMISSION) {
        LOG_ERROR("Esys called in bad sequence.");
        return TSS2_ESYS_RC_BAD_SEQUENCE;
    }
    esysContext->state = _ESYS_STATE_INTERNALERROR;
    RSRC_NODE_T *loadedHandleNode = NULL;

    /* Allocate memory for response parameters */
    if (loadedHandle == NULL) {
        LOG_ERROR("Handle loadedHandle may not be NULL");
        return TSS2_ESYS_RC_BAD_REFERENCE;
    }
    *loadedHandle = esysContext->esys_handle_cnt++;
    r = esys_CreateResourceObject(esysContext, *loadedHandle, &loadedHandleNode);
    if (r != TSS2_RC_SUCCESS)
        return r;

    IESYS_CONTEXT_DATA esyscontextData;
    size_t offset = 0;
    r = iesys_MU_IESYS_CONTEXT_DATA_Unmarshal(&esysContext->in.ContextLoad.context->contextBlob.buffer[0],
                                              sizeof(IESYS_CONTEXT_DATA),
                                              &offset, &esyscontextData);
    goto_if_error(r, "while unmarshaling context ", error_cleanup);

    loadedHandleNode->rsrc = esyscontextData.esysMetadata.data;

    /*Receive the TPM response and handle resubmissions if necessary. */
    r = Tss2_Sys_ExecuteFinish(esysContext->sys, esysContext->timeout);
    if (base_rc(r) == TSS2_BASE_RC_TRY_AGAIN) {
        LOG_DEBUG("A layer below returned TRY_AGAIN: %" PRIx32, r);
        esysContext->state = _ESYS_STATE_SENT;
        goto error_cleanup;
    }
    /* This block handle the resubmission of TPM commands given a certain set of
     * TPM response codes. */
    if (r == TPM2_RC_RETRY || r == TPM2_RC_TESTING || r == TPM2_RC_YIELDED) {
        LOG_DEBUG("TPM returned RETRY, TESTING or YIELDED, which triggers a "
            "resubmission: %" PRIx32, r);
        if (esysContext->submissionCount++ >= _ESYS_MAX_SUBMISSIONS) {
            LOG_WARNING("Maximum number of (re)submissions has been reached.");
            esysContext->state = _ESYS_STATE_INIT;
            goto error_cleanup;
        }
        esysContext->state = _ESYS_STATE_RESUBMISSION;
        r = Tss2_Sys_ExecuteAsync(esysContext->sys);
        if (r != TSS2_RC_SUCCESS) {
            LOG_WARNING("Error attempting to resubmit");
            /* We do not set esysContext->state here but inherit the most recent
             * state of the _async function. */
            goto error_cleanup;
        }
        r = TSS2_ESYS_RC_TRY_AGAIN;
        LOG_DEBUG("Resubmission initiated and returning RC_TRY_AGAIN.");
        goto error_cleanup;
    }
    /* The following is the "regular error" handling. */
    if (iesys_tpm_error(r)) {
        LOG_WARNING("Received TPM Error");
        esysContext->state = _ESYS_STATE_INIT;
        goto error_cleanup;
    } else if (r != TSS2_RC_SUCCESS) {
        LOG_ERROR("Received a non-TPM Error");
        esysContext->state = _ESYS_STATE_INTERNALERROR;
        goto error_cleanup;
    }
    r = Tss2_Sys_ContextLoad_Complete(esysContext->sys,
                                      &loadedHandleNode->rsrc.handle);
    goto_state_if_error(r, _ESYS_STATE_INTERNALERROR,
                        "Received error from SAPI unmarshaling" ,
                        error_cleanup);

    esysContext->state = _ESYS_STATE_INIT;

    return TSS2_RC_SUCCESS;

error_cleanup:
    Esys_TR_Close(esysContext, loadedHandle);

    return r;
}