blob: 54d00645c7df5eab7af2b7c08759616c18456250 [file] [log] [blame]
=head1 NAME
swtpm_ioctls - Description of the ioctl's of the CUSE TPM (swtpm_cuse)
and control commands used by the control channel over socket interface.
=head1 SYNOPSYS
B<#include E<lt>tpm_ioctl.hE<gt>>
=head1 DESCRIPTION
The CUSE TPM implements an ioctl interface on the CUSE TPM's character device.
The ioctl's are used for out-of-band control of various TPM operations,
such as its initialization, resetting, and state migration. The control channel
over TCP or UnixIO sockets uses control commands for these operations.
The following is an enumeration of the supported ioctl's and control commands,
along with the names of the data structure types. All ioctl's and control
commands return a TPM error code in their response. Ioctl's are prefixed with
I<PTM> and control commands are prefixed with I<CMD>.
In case of the ioctl interface, the pointer to a command's data structure is
passed as the 2nd parameter to the ioctl() function. The fields in the command's
data structure are to be fill out in host endianness format.
In case of control commands, the command code must be encoded as a 4 byte
integer preceding the command's data structure. Command code and data must be
written in big endian format.
=over 4
=item B<PTM_GET_CAPABILITY / CMD_GET_CAPABILITY, ptm_cap>
This ioctl allows the caller to check which ioctl's are implemented
by the CUSE TPM. The following is a list of capability flags that
may be set upon return:
=over 4
=item B<PTM_CAP_INIT (since v0.1)>
The PTM_INIT ioctl or CMD_INIT command is supported.
=item B<PTM_CAP_SHUTDOWN (since v0.1)>
The PTM_SHUTDOWN ioctl or CMD_SHUTDOWN command is supported.
=item B<PTM_CAP_GET_TPMESTABLISHED (since v0.1)>
The PTM_GET_TPMESTABLISHED ioctl or CMD_GET_TPMESTABLISHED command is supported.
=item B<PTM_CAP_SET_LOCALITY (since v0.1)>
The PTM_SET_LOCALITY ioctl or CMD_SET_LOCALITY is supported.
=item B<PTM_CAP_HASHING (since v0.1)>
The PTM_HASH_START, PTM_HASH_DATA, and PTM_HASH_END ioctl's or
CMD_HASH_START, CMD_HASH_DATA, CMD_HASH_END commands are supported.
=item B<PTM_CAP_CANCEL_TPM_CMD (since v0.1)>
The PTM_CANCEL_TPM_CMD ioctl or CMD_CANCEL_TPM_CMD command is supported.
=item B<PTM_CAP_STORE_VOLATILE (since v0.1)>
The PTM_STORE_VOLATILE ioctl or CMD_STORE_VOLATILE command is supported.
=item B<PTM_CAP_RESET_TPMESTABLISHED (since v0.1)>
The PTM_RESET_TPMESTABLISHED ioctl or CMD_RESET_TPMESTABLISHED command is supported.
=item B<PTM_CAP_GET_STATEBLOB (since v0.1)>
The PTM_GET_STATEBLOB ioctl or CMD_GET_STATEBLOB command is supported.
=item B<PTM_CAP_SET_STATEBLOB (since v0.1)>
The PTM_SET_STATEBLOB ioctl or CMD_SET_STATEBLOB command is supported.
=item B<PTM_CAP_STOP (since v0.1)>
The PTM_STOP ioctl or CMD_STOP command is supported.
=item B<PTM_CAP_GET_CONFIG (since v0.1)>
The PTM_GET_CONFIG ioctl or CMD_GET_CONFIG command is supported.
=item B<PTM_CAP_SET_DATAFD (since v0.1)>
The CMD_SET_DATAFD command is supported. This command only applies to UnixIO
and there is no support for PTM_SET_DATAFD.
=item B<PTM_SET_BUFFERSIZE (since v0.1)>
The PTM_SET_BUFFERSIZE ioctl or CMD_SET_BUFFERSIZE command is supported.
=back
=item B<PTM_INIT / CMD_INIT, ptm_init>
This ioctl must be used to initialize the TPM. It must be sent to the
TPM before any TPM command is sent.
The ptm_init data structure looks as follows:
struct ptm_init {
union {
struct {
uint32_t init_flags; /* see definitions below */
} req; /* request */
struct {
ptm_res tpm_result;
} resp; /* response */
} u;
};
The init_flags field in the request can be used to have the TPM
delete the volatile state upon startup (B<PTM_INIT_FLAG_DELETE_VOLATILE>).
A TPM result code is returned in the tpm_result field.
=item B<PTM_SHUTDOWN / CMD_SHUTDOWN, ptm_res>
This ioctl allows a user to shut down the TPM.
A TPM result code is returned in ptm_res.
=item B<PTM_GET_TPMESTABLISHED / CMD_GET_TPMESTABLISHED, ptm_est>
This ioctl is used to check whether the TPM established flag is set.
The tpm_est data structure looks as follows:
struct ptm_est {
union {
struct {
ptm_res tpm_result;
unsigned char bit; /* TPM established bit */
} resp; /* response */
} u;
};
A TPM result code is returned in the tpm_result field.
The status of the TPM establishment flag is returned in the
bit field.
=item B<PTM_SET_LOCALITY / CMD_SET_LOCALITY, ptm_loc>
This ioctl is used to set the current locality. All subsequent commands
will be executed in this locality until the locality is changed.
The ptm_loc data structure looks as follows:
struct ptm_loc {
union {
struct {
uint8_t loc; /* locality to set */
} req; /* request */
struct {
ptm_res tpm_result;
} resp; /* response */
} u;
};
The locality number must be set in the request's loc field. Valid
localities are in the range of 0 to 4.
A TPM result code is returned in the tpm_result field.
=item B<PTM_HASH_START / CMD_HASH_START, ptm_res>
This ioctl is used to start the hash operation that is typically
initiated by writing into certain registers of locality 4 of the
TPM Interface (TPM TIS). Subsequent write operations for transferring
data must be done with the B<PTM_HASH_DATA> ioctl.
A TPM result code is returned in ptm_res.
=item B<PTM_HASH_DATA / CMD_HASH_DATA, ptm_hdata>
This command is used to transfer the data for the hash operation.
The ptm_hdata structure looks as follows:
struct ptm_hdata {
union {
struct {
uint32_t length;
uint8_t data[4096];
} req; /* request */
struct {
ptm_res tpm_result;
} resp; /* response */
} u;
};
The length of the data is indicated in the length field with the data in
the data field. Up to 4096 bytes can be transferred in one call.
A TPM result code is returned in the tpm_result field.
=item B<PTM_HASH_END / CMD_HASH_END, ptm_res>
This command is used to indicate the end of a hash operation that was
started with the B<PTM_HASH_START> ioctl.
A TPM result code is returned in ptm_res.
=item B<PTM_CANCEL_CMD / CMD_CANCEL_CMD, ptm_res>
This command is used to cancel a TPM command.
A TPM result code is returned in ptm_res.
=item B<PTM_STORE_VOLATILE / CMD_STORE_VOLATILE, ptm_res>
This command is used to trigger the TPM to store the volatile state into
a file.
A TPM result code is returned in ptm_res.
=item B<PTM_RESET_ESTABLISHED / CMD_RESET_ESTABLISHED, ptm_reset_est>
This command is used to reset the TPM's establishment flag.
The ptm_reset_est data structure looks as follows:
struct ptm_reset_est {
union {
struct {
uint8_t loc; /* locality to use */
} req; /* request */
struct {
ptm_res tpm_result;
} resp; /* response */
} u;
};
The locality in which the establishment flag is to be reset must be set in
the loc field. Valid localities are in the range of 0 to 4.
A TPM result code is returned in the tpm_result field.
=item B<PTM_GET_STATEBLOB / CMD_GET_STATEBLOB, ptm_getstate>
This command is used to initiate the retrieval of one of the TPM's stateblobs.
The ptm_getstate data structure looks as follows:
struct ptm_getstate {
union {
struct {
uint32_t state_flags; /* may be: PTM_STATE_FLAG_DECRYPTED */
uint32_t type; /* which blob to pull */
uint32_t offset; /* offset from where to read */
} req; /* request */
struct {
ptm_res tpm_result;
uint32_t state_flags; /* may be: PTM_STATE_FLAG_ENCRYPTED */
uint32_t totlength; /* total length that will be transferred */
uint32_t length; /* number of bytes in following buffer */
uint8_t data[PTM_STATE_BLOB_SIZE];
} resp; /* response */
} u;
};
In the request the state_flags field allows a user to set the
B<PTM_STATE_FLAG_DECRYPT> flag to retrieve decrypted TPM state in case
the TPM's state was written in encrypted form.
The type field allows a user to choose one of the TPM's state blobs, and must be
one of B<PTM_BLOB_TYPE_PERMANENT>, B<PTM_BLOB_TYPE_VOLATILE>, and
B<PTM_BLOB_TYPE_SAVESTATE>.
The offset field indicates at what offset to read the data from. Subsequent
state transfers must advance the offset field to the next byte to be read.
If the read() interface is used the offset will be advanced automatically.
The response returns a TPM error code in the tpm_result field.
The state_flags field in the response indicates whether the returned
blob is encrypted.
The totlength field indicates the total length of the state blob.
The length field indicates the number of valid bytes in the data field.
If necessary, subsequent state blob transfers must be done using this
ioctl or using the read() call on the file descriptor. All state
must be transferred before the TPM will accept commands again.
=item B<PTM_SET_STATEBLOB / CMD_SET_STATEBLOB, ptm_setstate>
This command is used to transfer one of the TPM's stateblob to the TPM.
The ptm_setstate data structure looks as follows:
struct ptm_setstate {
union {
struct {
uint32_t state_flags; /* may be PTM_STATE_FLAG_ENCRYPTED */
uint32_t type; /* which blob to set */
uint32_t length; /* length of the data;
use 0 on the first packet to
transfer using write() */
uint8_t data[PTM_STATE_BLOB_SIZE];
} req; /* request */
struct {
ptm_res tpm_result;
} resp; /* response */
} u;
};
The state_flags field indicates whether the provided state is encrypted.
In case it is encrypted, a migration key must have been provided to the
TPM for it to be able to decrypt the state.
The type field indicates which one of the TPM's state blobs is being set.
It must be either one of B<PTM_BLOB_TYPE_PERMANENT>,
B<PTM_BLOB_TYPE_VOLATILE>, and B<PTM_BLOB_TYPE_SAVESTATE>.
The length field indicates the number of bytes of state blob data in the
data field. To transfer the state blob using the write() call, set the
length to 0.
The response returns a TPM error code in the tpm_result field.
=item B<PTM_STOP / CMD_STOP, ptm_res>
This command is used to stop the TPM. In contrast to a TPM shut down,
the stopping of the TPM only halts its operations without terminating
the TPM process. The TPM can restart operation with the B<PTM_INIT>
ioctl.
A TPM result code is returned in ptm_res.
=item B<PTM_GET_CONFIG / CMD_GET_CONFIG, ptm_getconfig>
This command is used to retrieve the TPM's current configuration.
The ptm_getconfig data structure looks as follows:
struct ptm_getconfig {
union {
struct {
ptm_res tpm_result;
uint32_t flags;
} resp; /* response */
} u;
};
A TPM result code is returned in the tpm_result field.
The flags field holds individual flags that indicate whether a file
encryption key is used (B<PTM_CONFIG_FLAG_FILE_KEY>)
and whether a migration key is used
(B<PTM_CONFIG_FLAG_MIGRATION_KEY>).
=item B<CMD_SET_DATAFD, ptm_res>
This command is only implemented for the control channel over UnixIO socket.
It is used to establish the TPM command channel by transferring a socket file
descriptor using the UnixIO socket's control channel and I<SCM_RIGHTS>.
See also B<sendmsg(2)> and B<cmsg(3)>.
A TPM result code is returned in ptm_res.
=item B<CMD_SET_BUFFERSIZE, ptm_setbuffersize>
This command allows a user to set and query for the buffer size that the TPM is
using for input and output I/O buffers.
The ptm_setbuffersize data structure looks as follows:
struct ptm_setbuffersize {
union {
struct {
uint32_t buffersize; /* 0 to query for current buffer size */
} req; /* request */
struct {
ptm_res tpm_result;
uint32_t buffersize; /* buffer size in use */
uint32_t minsize; /* min. supported buffer size */
uint32_t maxsize; /* max. supported buffer size */
} resp; /* response */
} u;
};
If a 0 is set in the buffer size of the request, the response will
return the buffer size that is currently in use. Any other number
will try to change the buffer size, but the TPM may adjust it to
an allowed minimum or maximum. The minimum and maximum supported
buffer sizes are returned in the response.
The buffersize can only be changed when the TPM is stopped. The
currently used buffersize can be read at any time.
=back
=head1 SEE ALSO
B<swtpm_ioctl(8)>, B<swtpm_cuse(8)>