docs/source/running_mypy.rst

.. _running-mypy:

Running mypy and managing imports
=================================

The :ref:`getting-started` page should have already introduced you
to the basics of how to run mypy -- pass in the files and directories
you want to type check via the command line::

    $ mypy foo.py bar.py some_directory

This page discusses in more detail how exactly to specify what files
you want mypy to type check, how mypy discovers imported modules,
and recommendations on how to handle any issues you may encounter
along the way.

If you are interested in learning about how to configure the
actual way mypy type checks your code, see our
:ref:`command-line` guide.


.. _specifying-code-to-be-checked:

Specifying code to be checked
*****************************

Mypy lets you specify what files it should type check in several different ways.

1.  First, you can pass in paths to Python files and directories you
    want to type check. For example::

        $ mypy file_1.py foo/file_2.py file_3.pyi some/directory

    The above command tells mypy it should type check all of the provided
    files together. In addition, mypy will recursively type check the
    entire contents of any provided directories.

    For more details about how exactly this is done, see
    :ref:`Mapping file paths to modules <mapping-paths-to-modules>`.

2.  Second, you can use the :option:`-m <mypy -m>` flag (long form: :option:`--module <mypy --module>`) to
    specify a module name to be type checked. The name of a module
    is identical to the name you would use to import that module
    within a Python program. For example, running::

        $ mypy -m html.parser

    ...will type check the module ``html.parser`` (this happens to be
    a library stub).

    Mypy will use an algorithm very similar to the one Python uses to
    find where modules and imports are located on the file system.
    For more details, see :ref:`finding-imports`.

3.  Third, you can use the :option:`-p <mypy -p>` (long form: :option:`--package <mypy --package>`) flag to
    specify a package to be (recursively) type checked. This flag
    is almost identical to the :option:`-m <mypy -m>` flag except that if you give it
    a package name, mypy will recursively type check all submodules
    and subpackages of that package. For example, running::

        $ mypy -p html

    ...will type check the entire ``html`` package (of library stubs).
    In contrast, if we had used the :option:`-m <mypy -m>` flag, mypy would have type
    checked just ``html``'s ``__init__.py`` file and anything imported
    from there.

    Note that we can specify multiple packages and modules on the
    command line. For example::

      $ mypy --package p.a --package p.b --module c

4.  Fourth, you can also instruct mypy to directly type check small
    strings as programs by using the :option:`-c <mypy -c>` (long form: :option:`--command <mypy --command>`)
    flag. For example::

        $ mypy -c 'x = [1, 2]; print(x())'

    ...will type check the above string as a mini-program (and in this case,
    will report that ``list[int]`` is not callable).

You can also use the :confval:`files` option in your :file:`mypy.ini` file to specify which
files to check, in which case you can simply run ``mypy`` with no arguments.


Reading a list of files from a file
***********************************

Finally, any command-line argument starting with ``@`` reads additional
command-line arguments from the file following the ``@`` character.
This is primarily useful if you have a file containing a list of files
that you want to be type-checked: instead of using shell syntax like::

    $ mypy $(cat file_of_files.txt)

you can use this instead::

    $ mypy @file_of_files.txt

This file can technically also contain any command line flag, not
just file paths. However, if you want to configure many different
flags, the recommended approach is to use a
:ref:`configuration file <config-file>` instead.


.. _mapping-paths-to-modules:

Mapping file paths to modules
*****************************

One of the main ways you can tell mypy what to type check
is by providing mypy a list of paths. For example::

    $ mypy file_1.py foo/file_2.py file_3.pyi some/directory

This section describes how exactly mypy maps the provided paths
to modules to type check.

- Mypy will check all paths provided that correspond to files.

- Mypy will recursively discover and check all files ending in ``.py`` or
  ``.pyi`` in directory paths provided, after accounting for
  :option:`--exclude <mypy --exclude>`.

- For each file to be checked, mypy will attempt to associate the file (e.g.
  ``project/foo/bar/baz.py``) with a fully qualified module name (e.g.
  ``foo.bar.baz``). The directory the package is in (``project``) is then
  added to mypy's module search paths.

How mypy determines fully qualified module names depends on if the options
:option:`--no-namespace-packages <mypy --no-namespace-packages>` and
:option:`--explicit-package-bases <mypy --explicit-package-bases>` are set.

1. If :option:`--no-namespace-packages <mypy --no-namespace-packages>` is set,
   mypy will rely solely upon the presence of ``__init__.py[i]`` files to
   determine the fully qualified module name. That is, mypy will crawl up the
   directory tree for as long as it continues to find ``__init__.py`` (or
   ``__init__.pyi``) files.

   For example, if your directory tree consists of ``pkg/subpkg/mod.py``, mypy
   would require ``pkg/__init__.py`` and ``pkg/subpkg/__init__.py`` to exist in
   order correctly associate ``mod.py`` with ``pkg.subpkg.mod``

2. The default case. If :option:`--namespace-packages <mypy
   --no-namespace-packages>` is on, but :option:`--explicit-package-bases <mypy
   --explicit-package-bases>` is off, mypy will allow for the possibility that
   directories without ``__init__.py[i]`` are packages. Specifically, mypy will
   look at all parent directories of the file and use the location of the
   highest ``__init__.py[i]`` in the directory tree to determine the top-level
   package.

   For example, say your directory tree consists solely of ``pkg/__init__.py``
   and ``pkg/a/b/c/d/mod.py``. When determining ``mod.py``'s fully qualified
   module name, mypy will look at ``pkg/__init__.py`` and conclude that the
   associated module name is ``pkg.a.b.c.d.mod``.

3. You'll notice that the above case still relies on ``__init__.py``. If
   you can't put an ``__init__.py`` in your top-level package, but still wish to
   pass paths (as opposed to packages or modules using the ``-p`` or ``-m``
   flags), :option:`--explicit-package-bases <mypy --explicit-package-bases>`
   provides a solution.

   With :option:`--explicit-package-bases <mypy --explicit-package-bases>`, mypy
   will locate the nearest parent directory that is a member of the ``MYPYPATH``
   environment variable, the :confval:`mypy_path` config or is the current
   working directory. Mypy will then use the relative path to determine the
   fully qualified module name.

   For example, say your directory tree consists solely of
   ``src/namespace_pkg/mod.py``. If you run the following command, mypy
   will correctly associate ``mod.py`` with ``namespace_pkg.mod``::

       $ MYPYPATH=src mypy --namespace-packages --explicit-package-bases .

If you pass a file not ending in ``.py[i]``, the module name assumed is
``__main__`` (matching the behavior of the Python interpreter), unless
:option:`--scripts-are-modules <mypy --scripts-are-modules>` is passed.

Passing :option:`-v <mypy -v>` will show you the files and associated module
names that mypy will check.


How mypy handles imports
************************

When mypy encounters an ``import`` statement, it will first
:ref:`attempt to locate <finding-imports>` that module
or type stubs for that module in the file system. Mypy will then
type check the imported module. There are three different outcomes
of this process:

1.  Mypy is unable to follow the import: the module either does not
    exist, or is a third party library that does not use type hints.

2.  Mypy is able to follow and type check the import, but you did
    not want mypy to type check that module at all.

3.  Mypy is able to successfully both follow and type check the
    module, and you want mypy to type check that module.

The third outcome is what mypy will do in the ideal case. The following
sections will discuss what to do in the other two cases.

.. _ignore-missing-imports:
.. _fix-missing-imports:

Missing imports
***************

When you import a module, mypy may report that it is unable to follow
the import. This can cause errors that look like the following:

.. code-block:: text

    main.py:1: error: Skipping analyzing 'django': module is installed, but missing library stubs or py.typed marker
    main.py:2: error: Library stubs not installed for "requests"
    main.py:3: error: Cannot find implementation or library stub for module named "this_module_does_not_exist"

If you get any of these errors on an import, mypy will assume the type of that
module is ``Any``, the dynamic type. This means attempting to access any
attribute of the module will automatically succeed:

.. code-block:: python

    # Error: Cannot find implementation or library stub for module named 'does_not_exist'
    import does_not_exist

    # But this type checks, and x will have type 'Any'
    x = does_not_exist.foobar()

This can result in mypy failing to warn you about errors in your code. Since
operations on ``Any`` result in ``Any``, these dynamic types can propagate
through your code, making type checking less effective. See
:ref:`dynamic-typing` for more information.

The next sections describe what each of these errors means and recommended next steps; scroll to
the section that matches your error.


Missing library stubs or py.typed marker
----------------------------------------

If you are getting a ``Skipping analyzing X: module is installed, but missing library stubs or py.typed marker``,
error, this means mypy was able to find the module you were importing, but no
corresponding type hints.

Mypy will not try inferring the types of any 3rd party libraries you have installed
unless they either have declared themselves to be
:ref:`PEP 561 compliant stub package <installed-packages>` (e.g. with a ``py.typed`` file) or have registered
themselves on `typeshed <https://github.com/python/typeshed>`_, the repository
of types for the standard library and some 3rd party libraries.

If you are getting this error, try to obtain type hints for the library you're using:

1.  Upgrading the version of the library you're using, in case a newer version
    has started to include type hints.

2.  Searching to see if there is a :ref:`PEP 561 compliant stub package <installed-packages>`
    corresponding to your third party library. Stub packages let you install
    type hints independently from the library itself.

    For example, if you want type hints for the ``django`` library, you can
    install the `django-stubs <https://pypi.org/project/django-stubs/>`_ package.

3.  :ref:`Writing your own stub files <stub-files>` containing type hints for
    the library. You can point mypy at your type hints either by passing
    them in via the command line, by using the  :confval:`files` or :confval:`mypy_path`
    config file options, or by
    adding the location to the ``MYPYPATH`` environment variable.

    These stub files do not need to be complete! A good strategy is to use
    :ref:`stubgen <stubgen>`, a program that comes bundled with mypy, to generate a first
    rough draft of the stubs. You can then iterate on just the parts of the
    library you need.

    If you want to share your work, you can try contributing your stubs back
    to the library -- see our documentation on creating
    :ref:`PEP 561 compliant packages <installed-packages>`.

4.  Force mypy to analyze the library as best as it can (as if the library provided
    a ``py.typed`` file), despite it likely missing any type annotations. In general,
    the quality of type checking will be poor and mypy may have issues when
    analyzing code not designed to be type checked.

    You can do this via setting the
    :option:`--follow-untyped-imports <mypy --follow-untyped-imports>`
    command line flag or :confval:`follow_untyped_imports` config file option to True.
    This option can be specified on a per-module basis as well:

    .. tab:: mypy.ini

        .. code-block:: ini

            [mypy-untyped_package.*]
            follow_untyped_imports = True

    .. tab:: pyproject.toml

        .. code-block:: toml

            [[tool.mypy.overrides]]
            module = ["untyped_package.*"]
            follow_untyped_imports = true

If you are unable to find any existing type hints nor have time to write your
own, you can instead *suppress* the errors.

All this will do is make mypy stop reporting an error on the line containing the
import: the imported module will continue to be of type ``Any``, and mypy may
not catch errors in its use.

1.  To suppress a *single* missing import error, add a ``# type: ignore`` at the end of the
    line containing the import.

2.  To suppress *all* missing import errors from a single library, add
    a per-module section to your :ref:`mypy config file <config-file>` setting
    :confval:`ignore_missing_imports` to True for that library. For example,
    suppose your codebase
    makes heavy use of an (untyped) library named ``foobar``. You can silence
    all import errors associated with that library and that library alone by
    adding the following section to your config file:

    .. tab:: mypy.ini

        .. code-block:: ini

            [mypy-foobar.*]
            ignore_missing_imports = True

    .. tab:: pyproject.toml

        .. code-block:: toml

            [[tool.mypy.overrides]]
            module = ["foobar.*"]
            ignore_missing_imports = true

    Note: this option is equivalent to adding a ``# type: ignore`` to every
    import of ``foobar`` in your codebase. For more information, see the
    documentation about configuring
    :ref:`import discovery <config-file-import-discovery>` in config files.
    The ``.*`` after ``foobar`` will ignore imports of ``foobar`` modules
    and subpackages in addition to the ``foobar`` top-level package namespace.

3.  To suppress *all* missing import errors for *all* untyped libraries
    in your codebase, use :option:`--disable-error-code=import-untyped <mypy --ignore-missing-imports>`.
    See :ref:`code-import-untyped` for more details on this error code.

    You can also set :confval:`disable_error_code`, like so:

    .. tab:: mypy.ini

        .. code-block:: ini

            [mypy]
            disable_error_code = import-untyped

    .. tab:: pyproject.toml

        .. code-block:: ini

            [tool.mypy]
            disable_error_code = ["import-untyped"]

    You can also set the :option:`--ignore-missing-imports <mypy --ignore-missing-imports>`
    command line flag or set the :confval:`ignore_missing_imports` config file
    option to True in the *global* section of your mypy config file. We
    recommend avoiding ``--ignore-missing-imports`` if possible: it's equivalent
    to adding a ``# type: ignore`` to all unresolved imports in your codebase.


Library stubs not installed
---------------------------

If mypy can't find stubs for a third-party library, and it knows that stubs exist for
the library, you will get a message like this:

.. code-block:: text

    main.py:1: error: Library stubs not installed for "yaml"
    main.py:1: note: Hint: "python3 -m pip install types-PyYAML"
    main.py:1: note: (or run "mypy --install-types" to install all missing stub packages)

You can resolve the issue by running the suggested pip commands.
If you're running mypy in CI, you can ensure the presence of any stub packages
you need the same as you would any other test dependency, e.g. by adding them to
the appropriate ``requirements.txt`` file.

Alternatively, add the :option:`--install-types <mypy --install-types>`
to your mypy command to install all known missing stubs:

.. code-block:: text

    mypy --install-types

This is slower than explicitly installing stubs, since it effectively
runs mypy twice -- the first time to find the missing stubs, and
the second time to type check your code properly after mypy has
installed the stubs. It also can make controlling stub versions harder,
resulting in less reproducible type checking.

By default, :option:`--install-types <mypy --install-types>` shows a confirmation prompt.
Use :option:`--non-interactive <mypy --non-interactive>` to install all suggested
stub packages without asking for confirmation *and* type check your code:

If you've already installed the relevant third-party libraries in an environment
other than the one mypy is running in, you can use :option:`--python-executable
<mypy --python-executable>` flag to point to the Python executable for that
environment, and mypy will find packages installed for that Python executable.

If you've installed the relevant stub packages and are still getting this error,
see the :ref:`section below <missing-type-hints-for-third-party-library>`.

.. _missing-type-hints-for-third-party-library:

Cannot find implementation or library stub
------------------------------------------

If you are getting a ``Cannot find implementation or library stub for module``
error, this means mypy was not able to find the module you are trying to
import, whether it comes bundled with type hints or not. If you are getting
this error, try:

1.  Making sure your import does not contain a typo.

2.  If the module is a third party library, making sure that mypy is able
    to find the interpreter containing the installed library.

    For example, if you are running your code in a virtualenv, make sure
    to install and use mypy within the virtualenv. Alternatively, if you
    want to use a globally installed mypy, set the
    :option:`--python-executable <mypy --python-executable>` command
    line flag to point the Python interpreter containing your installed
    third party packages.

    You can confirm that you are running mypy from the environment you expect
    by running it like ``python -m mypy ...``. You can confirm that you are
    installing into the environment you expect by running pip like
    ``python -m pip ...``.

3.  Reading the :ref:`finding-imports` section below to make sure you
    understand how exactly mypy searches for and finds modules and modify
    how you're invoking mypy accordingly.

4.  Directly specifying the directory containing the module you want to
    type check from the command line, by using the :confval:`mypy_path`
    or :confval:`files` config file options,
    or by using the ``MYPYPATH`` environment variable.

    Note: if the module you are trying to import is actually a *submodule* of
    some package, you should specify the directory containing the *entire* package.
    For example, suppose you are trying to add the module ``foo.bar.baz``
    which is located at ``~/foo-project/src/foo/bar/baz.py``. In this case,
    you must run ``mypy ~/foo-project/src`` (or set the ``MYPYPATH`` to
    ``~/foo-project/src``).

.. _finding-imports:

How imports are found
*********************

When mypy encounters an ``import`` statement or receives module
names from the command line via the :option:`--module <mypy --module>` or :option:`--package <mypy --package>`
flags, mypy tries to find the module on the file system similar
to the way Python finds it. However, there are some differences.

First, mypy has its own search path.
This is computed from the following items:

- The ``MYPYPATH`` environment variable
  (a list of directories, colon-separated on UNIX systems, semicolon-separated on Windows).
- The :confval:`mypy_path` config file option.
- The directories containing the sources given on the command line
  (see :ref:`Mapping file paths to modules <mapping-paths-to-modules>`).
- The installed packages marked as safe for type checking (see
  :ref:`PEP 561 support <installed-packages>`)
- The relevant directories of the
  `typeshed <https://github.com/python/typeshed>`_ repo.

.. note::

    You cannot point to a stub-only package (:pep:`561`) via the ``MYPYPATH``, it must be
    installed (see :ref:`PEP 561 support <installed-packages>`)

Second, mypy searches for stub files in addition to regular Python files
and packages.
The rules for searching for a module ``foo`` are as follows:

- The search looks in each of the directories in the search path
  (see above) until a match is found.
- If a package named ``foo`` is found (i.e. a directory
  ``foo`` containing an ``__init__.py`` or ``__init__.pyi`` file)
  that's a match.
- If a stub file named ``foo.pyi`` is found, that's a match.
- If a Python module named ``foo.py`` is found, that's a match.

These matches are tried in order, so that if multiple matches are found
in the same directory on the search path
(e.g. a package and a Python file, or a stub file and a Python file)
the first one in the above list wins.

In particular, if a Python file and a stub file are both present in the
same directory on the search path, only the stub file is used.
(However, if the files are in different directories, the one found
in the earlier directory is used.)

Setting :confval:`mypy_path`/``MYPYPATH`` is mostly useful in the case
where you want to try running mypy against multiple distinct
sets of files that happen to share some common dependencies.

For example, if you have multiple projects that happen to be
using the same set of work-in-progress stubs, it could be
convenient to just have your ``MYPYPATH`` point to a single
directory containing the stubs.

.. _follow-imports:

Following imports
*****************

Mypy is designed to :ref:`doggedly follow all imports <finding-imports>`,
even if the imported module is not a file you explicitly wanted mypy to check.

For example, suppose we have two modules ``mycode.foo`` and ``mycode.bar``:
the former has type hints and the latter does not. We run
:option:`mypy -m mycode.foo <mypy -m>` and mypy discovers that ``mycode.foo`` imports
``mycode.bar``.

How do we want mypy to type check ``mycode.bar``? Mypy's behaviour here is
configurable -- although we **strongly recommend** using the default --
by using the :option:`--follow-imports <mypy --follow-imports>` flag. This flag
accepts one of four string values:

-   ``normal`` (the default, recommended) follows all imports normally and
    type checks all top level code (as well as the bodies of all
    functions and methods with at least one type annotation in
    the signature).

-   ``silent`` behaves in the same way as ``normal`` but will
    additionally *suppress* any error messages.

-   ``skip`` will *not* follow imports and instead will silently
    replace the module (and *anything imported from it*) with an
    object of type ``Any``.

-   ``error`` behaves in the same way as ``skip`` but is not quite as
    silent -- it will flag the import as an error, like this::

        main.py:1: note: Import of "mycode.bar" ignored
        main.py:1: note: (Using --follow-imports=error, module not passed on command line)

If you are starting a new codebase and plan on using type hints from
the start, we **recommend** you use either :option:`--follow-imports=normal <mypy --follow-imports>`
(the default) or :option:`--follow-imports=error <mypy --follow-imports>`. Either option will help
make sure you are not skipping checking any part of your codebase by
accident.

If you are planning on adding type hints to a large, existing code base,
we recommend you start by trying to make your entire codebase (including
files that do not use type hints) pass under :option:`--follow-imports=normal <mypy --follow-imports>`.
This is usually not too difficult to do: mypy is designed to report as
few error messages as possible when it is looking at unannotated code.

Only if doing this is intractable, try passing mypy just the files
you want to type check and using :option:`--follow-imports=silent <mypy --follow-imports>`.
Even if mypy is unable to perfectly type check a file, it can still glean some
useful information by parsing it (for example, understanding what methods
a given object has). See :ref:`existing-code` for more recommendations.

Adjusting import following behaviour is often most useful when restricted to
specific modules. This can be accomplished by setting a per-module
:confval:`follow_imports` config option.

.. warning::

    We do not recommend using ``follow_imports=skip`` unless you're really sure
    you know what you are doing. This option greatly restricts the analysis mypy
    can perform and you will lose a lot of the benefits of type checking.

    This is especially true at the global level. Setting a per-module
    ``follow_imports=skip`` for a specific problematic module can be
    useful without causing too much harm.

.. note::

    If you're looking to resolve import errors related to libraries, try following
    the advice in :ref:`fix-missing-imports` before messing with ``follow_imports``.