| cmake_minimum_required(VERSION 3.18) | |
| project(libmimalloc C) | |
| set(CMAKE_C_STANDARD 11) | |
| set(CMAKE_CXX_STANDARD 17) | |
| set(MI_SECURE "OFF" CACHE STRING "Use security mitigations (like meta data guard pages, allocation randomization, double-free mitigation, and free-list corruption detection): OFF, ON, FULL. The FULL setting adds guard pages at the end of each mimalloc page (which may be expensive)") | |
| set_property(CACHE MI_SECURE PROPERTY STRINGS "OFF" "ON" "FULL") | |
| option(MI_OVERRIDE "Override the standard malloc interface (i.e. define entry points for 'malloc', 'free', etc)" ON) | |
| option(MI_XMALLOC "Enable abort() call on memory allocation failure by default" OFF) | |
| option(MI_SHOW_ERRORS "Show error and warning messages by default (only enabled by default in DEBUG mode)" OFF) | |
| set(MI_GUARDED "DEFAULT" CACHE STRING "Build with ability to put guard pages behind certain object allocations") | |
| set_property(CACHE MI_GUARDED PROPERTY STRINGS "OFF" "ON" "FULL" "DEFAULT") | |
| set(MI_USE_CXX "DEFAULT" CACHE STRING "Use the C++ compiler to compile the library (instead of the C compiler)") | |
| set_property(CACHE MI_USE_CXX PROPERTY STRINGS "OFF" "ON" "DEFAULT") | |
| set(MI_OPT_ARCH "DEFAULT" CACHE STRING "Only for optimized builds: turn on architecture specific optimizations (for x64: '-march=haswell;-mavx2' (2013), for arm64: '-march=armv8.1-a' (2016), for riscV: '-march=rv64gcb_zacas' (2023))") | |
| set_property(CACHE MI_OPT_ARCH PROPERTY STRINGS "OFF" "ON" "avx2" "armv8.1" "armv8.3" "rva22" "rva23" "rv64gcb_zacas" "rv64gcb_zacas_zalasr" "DEFAULT") | |
| set(MI_DEBUG "DEFAULT" CACHE STRING "Enable assertion checks: OFF, ON, INTERNAL, FULL, DEFAULT. INTERNAL adds extra internal invariant checks, while FULL adds expensive heap invariant checks") | |
| set_property(CACHE MI_DEBUG PROPERTY STRINGS "OFF" "ON" "INTERNAL" "FULL" "DEFAULT") | |
| set(MI_TRACK "OFF" CACHE STRING "Enable tracking: OFF, ASAN (address sanitizer), VALGRIND, ETW (Windows event tracing). Adds a small overhead.") | |
| set_property(CACHE MI_TRACK PROPERTY STRINGS "OFF" "ASAN" "VALGRIND" "ETW") | |
| set(MI_STATS "DEFAULT" CACHE STRING "Enable statistics.") | |
| set_property(CACHE MI_STATS PROPERTY STRINGS "OFF" "ON" "FULL" "DEFAULT") | |
| set(MI_PROFILE "DEFAULT" CACHE STRING "Enable profiling.") | |
| set_property(CACHE MI_PROFILE PROPERTY STRINGS "OFF" "ON" "FULL" "DEFAULT") | |
| set(MI_FREE_IS_CHECKED "DEFAULT" CACHE STRING "Check for invalid pointers in 'mi_free': OFF, SHARED, ON, DEFAULT. 'SHARED' enables it only for the dynamic/shared library when MI_OVERRIDE is ON") | |
| set_property(CACHE MI_FREE_IS_CHECKED PROPERTY STRINGS "OFF" "SHARED" "ON" "DEFAULT") | |
| set(MI_ALLOW_THP "DEFAULT" CACHE STRING "Enable transparent huge pages on Linux: OFF, ON, FULL, DEFAULT. 'FULL' enables THP and also avoids splitting up huge pages during purging.") | |
| set_property(CACHE MI_ALLOW_THP PROPERTY STRINGS "OFF" "ON" "FULL" "DEFAULT") | |
| option(MI_OPT_SIMD "Use SIMD instructions (requires MI_OPT_ARCH to be enabled)" OFF) | |
| option(MI_DEBUG_TSAN "Build with thread sanitizer (needs clang)" OFF) | |
| option(MI_DEBUG_UBSAN "Build with undefined-behavior sanitizer (needs clang++)" OFF) | |
| option(MI_BUILD_SHARED "Build shared library" ON) | |
| option(MI_BUILD_STATIC "Build static library" ON) | |
| option(MI_BUILD_OBJECT "Build object library" ON) | |
| option(MI_BUILD_TESTS "Build test executables" ON) | |
| # OS specific | |
| option(MI_OSX_INTERPOSE "Use interpose to override standard malloc on macOS" ON) | |
| option(MI_OSX_ZONE "Use malloc zone to override standard malloc on macOS" ON) | |
| option(MI_WIN_REDIRECT "Use redirection module ('mimalloc-redirect') on Windows if compiling mimalloc as a DLL" ON) | |
| option(MI_LIBC_MUSL "Enable this when linking with musl libc" OFF) | |
| # advanced | |
| option(MI_INSTALL_TOPLEVEL "Install directly into $CMAKE_INSTALL_PREFIX instead of PREFIX/lib/mimalloc-version" OFF) | |
| option(MI_NO_THP "Disable transparent huge pages support on Linux/Android for the mimalloc process only" OFF) | |
| option(MI_FREE_USE_PAGEMAP "Always use the page map when free-ing a pointer -- enable only for systems that don't support large OS aligned allocations well." OFF) | |
| option(MI_PADDING "Enable padding to detect heap block overflow (always on in DEBUG or SECURE mode, or with Valgrind/ASAN)" OFF) | |
| option(MI_NO_PADDING "Force no use of padding even in DEBUG mode etc." OFF) | |
| option(MI_SKIP_COLLECT_ON_EXIT "Skip collecting memory on program exit" OFF) | |
| option(MI_EXTRA_CPPDEFS "Extra pre-processor definitions (use as `-DMI_EXTRA_CPPDEFS=\"opt1=val1;opt2=val2\"`)" "") | |
| option(MI_SEE_ASM "Generate assembly files" OFF) | |
| # negated options for vcpkg features | |
| option(MI_NO_USE_CXX "Use plain C compilation (has priority over MI_USE_CXX)" OFF) | |
| option(MI_NO_OPT_ARCH "Do not use architecture specific optimizations (like '-march=armv8.3-a' for example) (has priority over MI_OPT_ARCH)" OFF) | |
| option(MI_NO_DEBUG "Disable all assertion checks even in debug builds" OFF) | |
| # experimental | |
| option(MI_TLS_RECURSE_GUARD "Force a recursion check on thread local access (for MI_TLS_MODEL_LOCAL only)" OFF) | |
| set(MI_WIN_INIT "DEFAULT" CACHE STRING "Force Windows intialization strategy: CRT_TLS (default), RAW_DLLMAIN (use raw DLL main entry point), TLS_DLLMAIN (TLS entries with DllMain), FLS (legacy fiber API), DEFAULT") | |
| set_property(CACHE MI_WIN_INIT PROPERTY STRINGS "CRT_TLS" "RAW_DLLMAIN" "TLS_DLLMAIN" "FLS" "DEFAULT") | |
| set(MI_TLS_MODEL "DEFAULT" CACHE STRING "Force TLS model: LOCAL (thread local variables), PTHREADS (pthread locals), LOCAL_DYNAMIC (dlopen-compatible thread local storage mechanism (Unix)), WIN32 (direct Windows TLS slots), FIXED (fixed thread local slots), DEFAULT.") | |
| set_property(CACHE MI_TLS_MODEL PROPERTY STRINGS "LOCAL" "PTHREADS" "LOCAL_DYNAMIC" "WIN32" "FIXED" "DEFAULT") | |
| # deprecated options | |
| option(MI_USE_LIBATOMIC "Deprecated: Explicitly link with -latomic (on older systems) (deprecated and detected automatically)" OFF) | |
| option(MI_DEBUG_INTERNAL "Deprecated: Enable assertion and internal invariant checks (use MI_DEBUG=INTERNAL instead)" OFF) | |
| option(MI_DEBUG_FULL "Deprecated: Enable assertion checks and expensive internal heap invariant checking (use MI_DEBUG=FULL instead)" OFF) | |
| option(MI_CHECK_FULL "Deprecated: Use full internal invariant checking in DEBUG mode (use MI_DEBUG=FULL instead)" OFF) | |
| option(MI_SECURE_FULL "Deprecated: Use full security mitigations including guard pages at the end of each mimalloc page (may be expensive) (use MI_SECURE=FULL instead)" OFF) | |
| option(MI_TLS_MODEL_LOCAL "Deprecated: Force TLS model based on thread local variables (use MI_TLS_MODEL=LOCAL instead)" OFF) | |
| option(MI_TLS_MODEL_PTHREADS "Deprecated: Force TLS model based on pthreads (use MI_TLS_MODEL=PTHREADS instead)" OFF) | |
| option(MI_TLS_MODEL_FIXED "Deprecated: Force TLS model based on fixed thread local slots (use MI_TLS_MODEL=FIXED instead)" OFF) | |
| option(MI_LOCAL_DYNAMIC_TLS "Deprecated: Use local-dynamic-tls, a slightly slower but dlopen-compatible thread local storage mechanism (Unix) (use MI_TLS_MODEL=LOCAL_DYNAMIC instead)" OFF) | |
| option(MI_WIN_USE_FLS "Deprecated: Use Fiber local storage on Windows to detect thread termination (use MI_WIN_INIT=FLS instead)" OFF) | |
| option(MI_WIN_INIT_USE_RAW_DLLMAIN "Deprecated: Use the raw DLL main entry point for mimalloc initialization; can be more robust but can also lead to link errors with other libraries (use MI_WIN_INIT=RAW_DLLMAIN instead)" OFF) | |
| option(MI_WIN_INIT_USE_TLS_DLLMAIN "Deprecated: Use legacy TLS entries with DllMain for mimalloc initialization (use MI_WIN_INIT=TLS_DLLMAIN instead)" OFF) | |
| option(MI_WIN_DIRECT_TLS "Deprecated: Use only direct TLS slots on Windows to avoid extra tests in the malloc fast path (only works if the program uses less than 64 TlsAlloc'd slots in total)" OFF) | |
| option(MI_TRACK_VALGRIND "Deprecated: Compile with Valgrind support (adds a small overhead) (use MI_TRACK=VALGRIND instead)" OFF) | |
| option(MI_TRACK_ASAN "Deprecated: Compile with address sanitizer support (adds a small overhead) (use MI_TRACK=ASAN instead)" OFF) | |
| option(MI_TRACK_ETW "Deprecated: Compile with Windows event tracing (ETW) support (adds a small overhead) (use MI_TRACK=ETW instead)" OFF) | |
| set(MI_OPT_FREE_SMALL "DEFAULT" CACHE STRING "Deprecated: Use aligned `mi_free_small` without pagemap lookup (can only be used if SECURE or GUARDED mode are off)") | |
| set_property(CACHE MI_OPT_FREE_SMALL PROPERTY STRINGS "OFF" "ON" "DEFAULT") | |
| include(CheckLinkerFlag) # requires cmake 3.18 | |
| include(CheckIncludeFiles) | |
| include(GNUInstallDirs) | |
| include("cmake/mimalloc-config-version.cmake") | |
| set(mi_sources | |
| src/alloc.c | |
| src/alloc-aligned.c | |
| src/alloc-posix.c | |
| src/arena.c | |
| src/bitmap.c | |
| src/heap.c | |
| src/init.c | |
| src/libc.c | |
| src/options.c | |
| src/os.c | |
| src/page.c | |
| src/page-map.c | |
| src/prim/prim.c | |
| src/prim/prim-tls.c | |
| src/random.c | |
| src/sample-guarded.c | |
| src/sample-profile.c | |
| src/stats.c | |
| src/subproc.c | |
| src/theap.c | |
| src/threadlocal.c | |
| src/profile/pprof.c) | |
| set(mi_cflags "") | |
| set(mi_cflags_static "") # extra flags for a static library build | |
| set(mi_cflags_dynamic "") # extra flags for a shared-object library build | |
| set(mi_libraries "") | |
| if(MI_EXTRA_CPPDEFS) | |
| set(mi_defines ${MI_EXTRA_CPPDEFS}) | |
| else() | |
| set(mi_defines "") | |
| endif() | |
| # pass git revision as a define | |
| if(EXISTS "${CMAKE_SOURCE_DIR}/.git/index") | |
| find_package(Git) | |
| if(GIT_FOUND) | |
| execute_process(COMMAND ${GIT_EXECUTABLE} "describe" OUTPUT_VARIABLE mi_git_describe RESULT_VARIABLE mi_git_res ERROR_QUIET OUTPUT_STRIP_TRAILING_WHITESPACE) | |
| if(mi_git_res EQUAL "0") | |
| list(APPEND mi_defines "MI_GIT_DESCRIBE=${mi_git_describe}") | |
| # add to dependencies so we rebuild if the git head commit changes | |
| set_property(GLOBAL APPEND PROPERTY CMAKE_CONFIGURE_DEPENDS "${CMAKE_SOURCE_DIR}/.git/index") | |
| endif() | |
| endif() | |
| endif() | |
| # case insensitive comparison | |
| function(STRIEQUAL str1 str2 is_equal) | |
| string(TOUPPER "${str1}" str1_upper) | |
| string(TOUPPER "${str2}" str2_upper) | |
| if(str1_upper STREQUAL str2_upper) | |
| set(${is_equal} TRUE PARENT_SCOPE) | |
| else() | |
| set(${is_equal} FALSE PARENT_SCOPE) | |
| endif() | |
| endfunction() | |
| # ----------------------------------------------------------------------------- | |
| # Convenience: set default build type and compiler depending on the build directory | |
| # ----------------------------------------------------------------------------- | |
| message(STATUS "") | |
| if(NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES) | |
| if ("${CMAKE_BINARY_DIR}" MATCHES ".*((D|d)ebug|asan|tsan|ubsan|valgrind)$") | |
| message(STATUS "No build type selected, default to 'Debug'") | |
| set(CMAKE_BUILD_TYPE "Debug") | |
| else() | |
| message(STATUS "No build type selected, default to 'Release'") | |
| set(CMAKE_BUILD_TYPE "Release") | |
| endif() | |
| endif() | |
| if(CMAKE_GENERATOR MATCHES "^Visual Studio.*$") | |
| message(STATUS "Note: when building with Visual Studio the build type is specified when building.") | |
| message(STATUS "For example: 'cmake --build . --config=Release") | |
| endif() | |
| if(NOT MI_SECURE AND NOT MI_SECURE_FULL AND "${CMAKE_BINARY_DIR}" MATCHES ".*(S|s)ecure$") | |
| message(STATUS "Default to secure build") | |
| set(MI_SECURE "ON") | |
| endif() | |
| # Determine architecture | |
| if(CMAKE_SIZEOF_VOID_P EQUAL 16) | |
| set(MI_ARCH_BITS "128") | |
| elseif(CMAKE_SIZEOF_VOID_P EQUAL 8) | |
| set(MI_ARCH_BITS "64") | |
| elseif(CMAKE_SIZEOF_VOID_P EQUAL 4) | |
| set(MI_ARCH_BITS "32") | |
| elseif(CMAKE_SIZEOF_VOID_P EQUAL 2) | |
| set(MI_ARCH_BITS "16") | |
| else() | |
| set(MI_ARCH_BITS "") | |
| endif() | |
| set(MI_ARCH "unknown") | |
| if(CMAKE_SYSTEM_PROCESSOR MATCHES "^(x86|i[3456]86)$" OR CMAKE_GENERATOR_PLATFORM MATCHES "^(x86|Win32)$") | |
| set(MI_ARCH "x86") | |
| elseif((CMAKE_SYSTEM_PROCESSOR MATCHES "^(x86_64|x64|amd64|AMD64)$" OR CMAKE_GENERATOR_PLATFORM STREQUAL "x64" OR "x86_64" IN_LIST CMAKE_OSX_ARCHITECTURES) AND NOT CMAKE_GENERATOR_PLATFORM STREQUAL "ARM64") # must be before arm64 | |
| set(MI_ARCH "x64") | |
| elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(aarch64|arm64|armv[89].?|ARM64)$" OR CMAKE_GENERATOR_PLATFORM STREQUAL "ARM64" OR "arm64" IN_LIST CMAKE_OSX_ARCHITECTURES) | |
| set(MI_ARCH "arm64") | |
| elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(arm|armv[34567].?|ARM)$") | |
| set(MI_ARCH "arm32") | |
| elseif(CMAKE_SYSTEM_PROCESSOR MATCHES "^(riscv|riscv32|riscv64)$") | |
| set(MI_ARCH "riscv${MI_ARCH_BITS}") | |
| else() | |
| set(MI_ARCH ${CMAKE_SYSTEM_PROCESSOR}) | |
| endif() | |
| message(STATUS "Architecture: ${MI_ARCH} (${MI_ARCH_BITS} bit)") # (${CMAKE_SYSTEM_PROCESSOR}, ${CMAKE_GENERATOR_PLATFORM}, ${CMAKE_GENERATOR})") | |
| # negative overrides (mainly to support vcpkg features) | |
| if(MI_NO_USE_CXX) | |
| set(MI_USE_CXX "OFF") | |
| endif() | |
| if(MI_NO_OPT_ARCH) | |
| set(MI_OPT_ARCH "OFF") | |
| endif() | |
| if(MI_OPT_ARCH STREQUAL "DEFAULT") | |
| if(MI_ARCH STREQUAL "arm64") | |
| set(MI_OPT_ARCH "ON") # enable by default for arm64 (defaults to armv8.1-a which has fast atomics) | |
| else() | |
| set(MI_OPT_ARCH "OFF") | |
| endif() | |
| endif() | |
| if(DEFINED ENV{MI_TEST_LIGHT}) | |
| list(APPEND mi_defines MI_TEST_LIGHT=1) # to lighten test load in test integration | |
| endif() | |
| # ----------------------------------------------------------------------------- | |
| # Enable the C++ compiler early on if needed | |
| # ----------------------------------------------------------------------------- | |
| # clang-cl detection on windows | |
| if(CMAKE_C_COMPILER_ID STREQUAL "Clang" AND CMAKE_C_COMPILER_FRONTEND_VARIANT STREQUAL "MSVC") | |
| set(MI_CLANG_CL "ON") | |
| endif() | |
| if(MI_USE_CXX STREQUAL "DEFAULT") | |
| if(CMAKE_C_COMPILER_ID MATCHES "MSVC|Intel" OR MI_CLANG_CL) | |
| # force C++ compilation with msvc or clang-cl to use modern C++ atomics | |
| set(MI_USE_CXX "ON") | |
| elseif(MI_DEBUG_UBSAN AND (CMAKE_BUILD_TYPE MATCHES "Debug" OR NOT CMAKE_CONFIGURATION_TYPES)) # ubsan needs C++ | |
| set(MI_USE_CXX "ON") | |
| else() | |
| set(MI_USE_CXX "OFF") | |
| endif() | |
| endif() | |
| # enable C++ ? | |
| if(MI_USE_CXX) | |
| enable_language(CXX) | |
| message(STATUS "Use the C++ compiler to compile (MI_USE_CXX=ON)") | |
| if(CMAKE_CXX_COMPILER_ID MATCHES "Intel" AND NOT CMAKE_CXX_COMPILER_ID MATCHES "IntelLLVM") | |
| list(APPEND mi_cflags -Kc++) | |
| elseif(MSVC AND MSVC_VERSION GREATER_EQUAL 1914) | |
| list(APPEND mi_cflags /Zc:__cplusplus) | |
| endif() | |
| endif() | |
| # ----------------------------------------------------------------------------- | |
| # Process options | |
| # ----------------------------------------------------------------------------- | |
| # put -Wall early so other warnings can be disabled selectively | |
| if(CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang") | |
| if (MI_CLANG_CL) | |
| list(APPEND mi_cflags -W) | |
| else() | |
| list(APPEND mi_cflags -Wall -Wextra -Wpedantic) | |
| endif() | |
| endif() | |
| if(CMAKE_C_COMPILER_ID MATCHES "GNU") | |
| list(APPEND mi_cflags -Wall -Wextra) | |
| endif() | |
| if(CMAKE_C_COMPILER_ID MATCHES "Intel") | |
| list(APPEND mi_cflags -Wall) | |
| endif() | |
| if(CMAKE_CXX_COMPILER_ID MATCHES "AppleClang|Clang") | |
| list(APPEND mi_cflags -Wno-deprecated) | |
| endif() | |
| if(MI_OVERRIDE) | |
| message(STATUS "Override standard malloc (MI_OVERRIDE=ON)") | |
| if(APPLE) | |
| if(MI_OSX_ZONE) | |
| # use zone's on macOS | |
| message(STATUS " Use malloc zone to override malloc (MI_OSX_ZONE=ON)") | |
| list(APPEND mi_sources src/prim/osx/alloc-override-zone.c) | |
| list(APPEND mi_defines MI_OSX_ZONE=1) | |
| if (NOT MI_OSX_INTERPOSE) | |
| message(STATUS " WARNING: zone overriding usually also needs interpose (use -DMI_OSX_INTERPOSE=ON)") | |
| endif() | |
| endif() | |
| if(MI_OSX_INTERPOSE) | |
| # use interpose on macOS | |
| message(STATUS " Use interpose to override malloc (MI_OSX_INTERPOSE=ON)") | |
| list(APPEND mi_defines MI_OSX_INTERPOSE=1) | |
| if (NOT MI_OSX_ZONE) | |
| message(STATUS " WARNING: interpose usually also needs zone overriding (use -DMI_OSX_ZONE=ON)") | |
| endif() | |
| endif() | |
| if(MI_USE_CXX AND MI_OSX_INTERPOSE) | |
| message(STATUS " WARNING: if dynamically overriding malloc/free, it is more reliable to build mimalloc as C code (use -DMI_USE_CXX=OFF)") | |
| endif() | |
| endif() | |
| endif() | |
| if(WIN32) | |
| if (NOT MI_WIN_REDIRECT) | |
| # use a negative define for backward compatibility | |
| list(APPEND mi_defines MI_WIN_NOREDIRECT=1) | |
| endif() | |
| endif() | |
| if(MI_SECURE_FULL) | |
| message(STATUS "MI_SECURE_FULL is deprecated, use MI_SECURE=FULL instead") | |
| set(MI_SECURE "FULL") | |
| endif() | |
| if(MI_SECURE STREQUAL "FULL") | |
| message(STATUS "Use full secure build (MI_SECURE=FULL, may be expensive)") | |
| list(APPEND mi_defines MI_SECURE=5) | |
| elseif(MI_SECURE) | |
| message(STATUS "Use secure build (MI_SECURE=${MI_SECURE})") | |
| list(APPEND mi_defines MI_SECURE=4) | |
| endif() | |
| if(MI_TRACK_VALGRIND) | |
| message(STATUS "Use of MI_TRACK_VALGRIND is deprecated, use MI_TRACK=VALGRIND instead") | |
| set(MI_TRACK "VALGRIND") | |
| elseif(MI_TRACK_ASAN) | |
| message(STATUS "Use of MI_TRACK_ASAN is deprecated, use MI_TRACK=ASAN instead") | |
| set(MI_TRACK "ASAN") | |
| elseif(MI_TRACK_ETW) | |
| message(STATUS "Use of MI_TRACK_ETW is deprecated, use MI_TRACK=ETW instead") | |
| set(MI_TRACK "ETW") | |
| endif() | |
| if(MI_TRACK STREQUAL "VALGRIND") | |
| CHECK_INCLUDE_FILES("valgrind/valgrind.h;valgrind/memcheck.h" MI_HAS_VALGRINDH) | |
| if (NOT MI_HAS_VALGRINDH) | |
| set(MI_TRACK OFF) | |
| message(WARNING "Cannot find the 'valgrind/valgrind.h' and 'valgrind/memcheck.h' -- install valgrind first?") | |
| message(STATUS "Disabling Valgrind support (MI_TRACK=OFF)") | |
| else() | |
| message(STATUS "Compile with Valgrind support (MI_TRACK=VALGRIND)") | |
| list(APPEND mi_defines MI_TRACK_VALGRIND=1) | |
| endif() | |
| elseif(MI_TRACK STREQUAL "ASAN") | |
| if (APPLE AND MI_OVERRIDE) | |
| set(MI_TRACK OFF) | |
| message(WARNING "Cannot enable address sanitizer support on macOS if MI_OVERRIDE is ON (MI_TRACK=OFF)") | |
| else() | |
| CHECK_INCLUDE_FILES("sanitizer/asan_interface.h" MI_HAS_ASANH) | |
| if (NOT MI_HAS_ASANH) | |
| set(MI_TRACK OFF) | |
| message(WARNING "Cannot find the 'sanitizer/asan_interface.h' -- install address sanitizer support first") | |
| message(STATUS "Compile **without** address sanitizer support (MI_TRACK=OFF)") | |
| else() | |
| message(STATUS "Compile with address sanitizer support (MI_TRACK=ASAN)") | |
| list(APPEND mi_defines MI_TRACK_ASAN=1) | |
| list(APPEND mi_cflags -fsanitize=address) | |
| list(APPEND mi_libraries -fsanitize=address) | |
| endif() | |
| endif() | |
| elseif(MI_TRACK STREQUAL "ETW") | |
| if(NOT WIN32) | |
| set(MI_TRACK OFF) | |
| message(WARNING "Can only enable ETW support on Windows (MI_TRACK=OFF)") | |
| else() | |
| message(STATUS "Compile with Windows event tracing support (MI_TRACK=ETW)") | |
| list(APPEND mi_defines MI_TRACK_ETW=1) | |
| endif() | |
| elseif(MI_TRACK) | |
| message(STATUS "Invalid option value: MI_TRACK=${MI_TRACK} (ignored)") | |
| endif() | |
| if(MI_SEE_ASM) | |
| message(STATUS "Generate assembly listings (MI_SEE_ASM=ON)") | |
| if(CMAKE_C_COMPILER_ID MATCHES "MSVC" OR MI_CLANG_CL) | |
| list(APPEND mi_cflags -FA) | |
| else() | |
| list(APPEND mi_cflags -save-temps=obj) | |
| if(CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang" AND CMAKE_C_COMPILER_VERSION VERSION_GREATER 14) | |
| message(STATUS "No GNU Line marker") | |
| list(APPEND mi_cflags -Wno-gnu-line-marker) | |
| endif() | |
| endif() | |
| endif() | |
| if (MI_SKIP_COLLECT_ON_EXIT) | |
| message(STATUS "Skip collecting memory on program exit (MI_SKIP_COLLECT_ON_EXIT=ON)") | |
| list(APPEND mi_defines MI_SKIP_COLLECT_ON_EXIT=1) | |
| endif() | |
| if(MI_CHECK_FULL OR MI_DEBUG_FULL) | |
| message(STATUS "Use of MI_CHECK_FULL/MI_DEBUG_FULL is deprecated, use MI_DEBUG=FULL instead") | |
| if(MI_DEBUG STREQUAL "DEFAULT") | |
| set(MI_DEBUG "FULL") | |
| endif() | |
| elseif(MI_DEBUG_INTERNAL) | |
| message(STATUS "Use of MI_DEBUG_INTERNAL is deprecated, use MI_DEBUG=INTERNAL instead") | |
| if(MI_DEBUG STREQUAL "DEFAULT") | |
| set(MI_DEBUG "INTERNAL") | |
| endif() | |
| endif() | |
| if(MI_DEBUG STREQUAL "DEFAULT") | |
| if(CMAKE_CONFIGURATION_TYPES) | |
| # Multi-config generators: Choose debug flags using generator expression | |
| list(APPEND mi_defines $<IF:$<CONFIG:Debug>,MI_DEBUG=2,MI_DEBUG=0 NDEBUG=1>) | |
| set(MI_DEBUG OFF) # don't go into further MI_DEBUG checks below... | |
| else() | |
| if(CMAKE_BUILD_TYPE MATCHES "Debug") | |
| set(MI_DEBUG "INTERNAL") | |
| else() | |
| set(MI_DEBUG "OFF") | |
| endif() | |
| endif() | |
| endif() | |
| if(MI_NO_DEBUG) | |
| message(STATUS "Disable assertion checks (MI_NO_DEBUG=ON)") | |
| list(APPEND mi_defines NDEBUG=1) | |
| set(MI_DEBUG OFF) | |
| elseif(MI_DEBUG STREQUAL "FULL") | |
| message(STATUS "Set debug level to full assertion and internal invariant checking (MI_DEBUG=FULL, expensive)") | |
| list(APPEND mi_defines MI_DEBUG=3) # full invariant checking (mi_assert, mi_assert_internal, and mi_assert_expensive) | |
| elseif(MI_DEBUG STREQUAL "INTERNAL") | |
| message(STATUS "Set debug level to internal assertion and invariant checking (MI_DEBUG=INTERNAL)") | |
| list(APPEND mi_defines MI_DEBUG=2) # invariant checking (mi_assert and mi_assert_internal) | |
| elseif(MI_DEBUG) | |
| message(STATUS "Set debug level to assertion checking (MI_DEBUG=${MI_DEBUG})") | |
| list(APPEND mi_defines MI_DEBUG=1) # assertion checking (mi_assert) | |
| elseif(NOT CMAKE_CONFIGURATION_TYPES) | |
| message(STATUS "Disable assertion checks (MI_DEBUG=${MI_DEBUG})") | |
| list(APPEND mi_defines NDEBUG=1) | |
| endif() | |
| if(MI_GUARDED STREQUAL "DEFAULT") | |
| if(MI_DEBUG) | |
| set(MI_GUARDED "FULL") | |
| else() | |
| set(MI_GUARDED "OFF") | |
| endif() | |
| endif() | |
| if(MI_GUARDED STREQUAL "FULL") | |
| message(STATUS "Enable fine-grained sampling for guard pages (MI_GUARDED=FULL)") | |
| list(APPEND mi_defines MI_GUARDED=2) | |
| elseif(MI_GUARDED) | |
| message(STATUS "Enable sampled guard pages (MI_GUARDED=${MI_GUARDED})") | |
| list(APPEND mi_defines MI_GUARDED=1) | |
| else() | |
| # message(STATUS "Disable guard pages (MI_GUARDED=${MI_GUARDED})") | |
| list(APPEND mi_defines MI_GUARDED=0) | |
| endif() | |
| if(MI_NO_PADDING) | |
| message(STATUS "Suppress any padding of heap blocks (MI_NO_PADDING=ON)") | |
| list(APPEND mi_defines MI_PADDING=0) | |
| else() | |
| if(MI_PADDING) | |
| message(STATUS "Enable explicit padding of heap blocks (MI_PADDING=ON)") | |
| list(APPEND mi_defines MI_PADDING=1) | |
| endif() | |
| endif() | |
| if(MI_FREE_IS_CHECKED STREQUAL "DEFAULT") | |
| if (MI_SECURE) | |
| set(MI_FREE_IS_CHECKED ON) | |
| else() | |
| set(MI_FREE_IS_CHECKED OFF) | |
| endif() | |
| endif() | |
| if(MI_FREE_IS_CHECKED STREQUAL "ON") | |
| message(STATUS "Check validity eof pointers passed to 'mi_free' (MI_FREE_IS_CHECKED=ON)") | |
| list(APPEND mi_defines MI_FREE_IS_CHECKED=1) | |
| elseif(MI_SECURE) | |
| message(STATUS "Check validity of pointers passed to 'mi_free' (MI_SECURE=ON, MI_FREE_IS_CHECKED=ON)") | |
| elseif(MI_FREE_IS_CHECKED STREQUAL "SHARED") | |
| message(STATUS "Check validity of pointers passed to 'mi_free' only in the dynamic/shared link library (MI_FREE_IS_CHECKED=SHARED)") | |
| list(APPEND mi_cflags_dynamic -DMI_FREE_IS_CHECKED=1) | |
| elseif(MI_FREE_IS_CHECKED STREQUAL "OFF") | |
| # message(STATUS "Do not check validity of pointers passed to 'mi_free' (MI_FREE_IS_CHECKED=OFF)") | |
| else() | |
| message(STATUS "Invalid value for MI_FREE_IS_CHECKED: ${MI_FREE_IS_CHECKED} (expecting: DEFAULT, OFF, SHARED, or ON)") | |
| endif() | |
| if(MI_STATS STREQUAL "DEFAULT") | |
| if(MI_DEBUG) | |
| set(MI_STATS "FULL") | |
| else() | |
| set(MI_STATS "ON") | |
| endif() | |
| endif() | |
| if(MI_STATS STREQUAL "FULL") | |
| message(STATUS "Enable detailed statistics including precise requested bytes (expensive) (MI_STATS=FULL)") | |
| list(APPEND mi_defines MI_STATS=2) | |
| elseif(MI_STATS) | |
| message(STATUS "Enable detailed statistics (MI_STATS=${MI_STATS})") | |
| list(APPEND mi_defines MI_STATS=1) | |
| else() | |
| message(STATUS "Disable detailed statistics (MI_STATS=${MI_STATS})") | |
| list(APPEND mi_defines MI_STATS=0) | |
| endif() | |
| if(MI_PROFILE STREQUAL "DEFAULT") | |
| if(MI_DEBUG) | |
| set(MI_PROFILE "FULL") | |
| else() | |
| set(MI_PROFILE "ON") | |
| endif() | |
| endif() | |
| if(MI_PROFILE STREQUAL "FULL") | |
| message(STATUS "Enable fine-grained sampled profiling (MI_PROFILE=FULL)") | |
| list(APPEND mi_defines MI_PROFILE=2) | |
| elseif(MI_PROFILE) | |
| message(STATUS "Enable sampled profiling (MI_PROFILE=${MI_PROFILE})") | |
| list(APPEND mi_defines MI_PROFILE=1) | |
| else() | |
| message(STATUS "Disable profiling (MI_PROFILE=${MI_PROFILE})") | |
| list(APPEND mi_defines MI_PROFILE=0) | |
| endif() | |
| if(CMAKE_SYSTEM_NAME STREQUAL "WASI") | |
| message(STATUS "Enabling MI_FREE_USE_PAGEMAP since the target (WASI) does not support large OS aligned allocations well") | |
| set(MI_FREE_USE_PAGEMAP ON) | |
| endif() | |
| if(MI_FREE_USE_PAGEMAP) | |
| message(STATUS "Always use the pagemap in mi_free (MI_FREE_USE_PAGEMAP=ON)") | |
| list(APPEND mi_defines MI_FREE_USE_PAGEMAP=1) | |
| endif() | |
| # deprecated | |
| if(MI_OPT_FREE_SMALL STREQUAL "DEFAULT") | |
| # do nothing | |
| elseif(MI_OPT_FREE_SMALL) | |
| if(MI_GUARDED OR MI_SECURE) | |
| message(STATUS "Cannot enable MI_OPT_FREE_SMALL in secure or guarded mode (MI_OPT_FREE_SMALL=OFF)") | |
| else() | |
| message(STATUS "Use aligned `mi_free_small` (MI_OPT_FREE_SMALL=ON)") | |
| list(APPEND mi_defines MI_OPT_FREE_SMALL=1) | |
| endif() | |
| else() | |
| message(STATUS "Disable aligned `mi_free_small` (MI_OPT_FREE_SMALL=OFF)") | |
| list(APPEND mi_defines MI_OPT_FREE_SMALL=0) | |
| endif() | |
| if(MI_XMALLOC) | |
| message(STATUS "Enable abort() calls on memory allocation failure (MI_XMALLOC=ON)") | |
| list(APPEND mi_defines MI_XMALLOC=1) | |
| endif() | |
| if(MI_SHOW_ERRORS) | |
| message(STATUS "Enable printing of error and warning messages by default (MI_SHOW_ERRORS=ON)") | |
| list(APPEND mi_defines MI_SHOW_ERRORS=1) | |
| endif() | |
| if(MI_DEBUG_TSAN) | |
| if(CMAKE_C_COMPILER_ID MATCHES "Clang") | |
| message(STATUS "Build with thread sanitizer (MI_DEBUG_TSAN=ON)") | |
| list(APPEND mi_defines MI_TSAN=1) | |
| list(APPEND mi_cflags -fsanitize=thread -g -O1) | |
| list(APPEND mi_libraries -fsanitize=thread) | |
| else() | |
| message(WARNING "Can only use thread sanitizer with clang (MI_DEBUG_TSAN=ON but ignored)") | |
| endif() | |
| endif() | |
| if(MI_DEBUG_UBSAN) | |
| if(CMAKE_BUILD_TYPE MATCHES "Debug" OR CMAKE_CONFIGURATION_TYPES) | |
| if(MI_USE_CXX) | |
| if(CMAKE_CXX_COMPILER_ID MATCHES "Clang") | |
| message(STATUS "Build with undefined-behavior sanitizer (MI_DEBUG_UBSAN=ON)") | |
| list(APPEND mi_defines MI_UBSAN=1) | |
| list(APPEND mi_cflags -fsanitize=undefined -g -fno-sanitize-recover=undefined) | |
| list(APPEND mi_libraries -fsanitize=undefined) | |
| else() | |
| message(WARNING "Can only use undefined-behavior sanitizer with clang++ (MI_DEBUG_UBSAN=ON but ignored)") | |
| endif() | |
| else() | |
| message(WARNING "Can only use undefined-behavior sanitizer with a C++ build (MI_USE_CXX=ON)") | |
| endif() | |
| else() | |
| message(WARNING "Can only use undefined-behavior sanitizer with a debug build (CMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE})") | |
| endif() | |
| endif() | |
| if(CMAKE_SYSTEM_NAME MATCHES "Linux|Android") | |
| if(MI_NO_THP) | |
| set(MI_ALLOW_THP "OFF") | |
| endif() | |
| if(MI_ALLOW_THP STREQUAL "DEFAULT") | |
| if(CMAKE_SYSTEM_NAME MATCHES "Android") | |
| set(MI_ALLOW_THP "OFF") | |
| else() | |
| set(MI_ALLOW_THP "FULL") | |
| endif() | |
| endif() | |
| if(MI_ALLOW_THP STREQUAL "FULL") | |
| message(STATUS "Enable full transparent huge pages support, where purging avoids splitting huge pages (MI_ALLOW_THP=FULL)") | |
| list(APPEND mi_defines MI_DEFAULT_ALLOW_THP=2) | |
| elseif (MI_ALLOW_THP) | |
| message(STATUS "Enable transparent huge pages support (MI_ALLOW_THP=${MI_ALLOW_THP}) (also consider using FULL for better performance)") | |
| list(APPEND mi_defines MI_DEFAULT_ALLOW_THP=1) | |
| else() | |
| message(STATUS "Disable transparent huge pages support (MI_ALLOW_THP=${MI_ALLOW_THP})") | |
| list(APPEND mi_defines MI_DEFAULT_ALLOW_THP=0) | |
| endif() | |
| endif() | |
| if(MI_LIBC_MUSL) | |
| message(STATUS "Assume using musl libc (MI_LIBC_MUSL=ON)") | |
| list(APPEND mi_defines MI_LIBC_MUSL=1) | |
| endif() | |
| if(MI_TLS_MODEL STREQUAL "DEFAULT") | |
| if(MI_TLS_MODEL_PTHREADS) | |
| message(STATUS "Use of MI_TLS_MODEL_PTHREADS is deprecated, use MI_TLS_MODEL=PTHREADS instead") | |
| set(MI_TLS_MODEL "PTHREADS") | |
| elseif(MI_TLS_MODEL_FIXED) | |
| message(STATUS "Use of MI_TLS_MODEL_FIXED is deprecated, use MI_TLS_MODEL=FIXED instead") | |
| set(MI_TLS_MODEL "FIXED") | |
| elseif(MI_TLS_MODEL_LOCAL) | |
| message(STATUS "Use of MI_TLS_MODEL_LOCAL is deprecated, use MI_TLS_MODEL=LOCAL instead") | |
| set(MI_TLS_MODEL "LOCAL") | |
| elseif(MI_LOCAL_DYNAMIC_TLS) | |
| message(STATUS "Use of MI_LOCAL_DYNAMIC_TLS is deprecated, use MI_TLS_MODEL=LOCAL_DYNAMIC instead") | |
| set(MI_TLS_MODEL "LOCAL_DYNAMIC") | |
| endif() | |
| endif() | |
| if(MI_TLS_MODEL STREQUAL "PTHREADS") | |
| message(STATUS "Use TLS model based on pthreads (MI_TLS_MODEL=PTHREADS)") | |
| list(APPEND mi_defines MI_TLS_MODEL_PTHREADS=1) | |
| elseif(MI_TLS_MODEL STREQUAL "FIXED") | |
| message(STATUS "Use TLS model based on fixed thread local slots (MI_TLS_MODEL=FIXED)") | |
| message(STATUS "Note: fixed TLS slots do not allow multiple mimalloc instances in a single process.") | |
| list(APPEND mi_defines MI_TLS_MODEL=FIXED=1) | |
| elseif(MI_TLS_MODEL STREQUAL "LOCAL") | |
| message(STATUS "Use TLS model based on thread local (MI_TLS_MODEL=LOCAL)") | |
| if(APPLE) | |
| message(WARNING "On macOS the MI_TLS_MODEL=LOCAL does not work reliably when dynamically overriding mimalloc. MI_TLS_MODEL=PTHREADS is recommended instead.") | |
| endif() | |
| list(APPEND mi_defines MI_TLS_MODEL_LOCAL=1) | |
| elseif(MI_TLS_MODEL STREQUAL "LOCAL_DYNAMIC") | |
| message(STATUS "Use TLS model based on dlopen compatible dynamic thread locals (MI_TLS_MODEL=LOCAL_DYNAMIC)") | |
| list(APPEND mi_defines MI_TLS_MODEL_LOCAL=1) | |
| elseif(MI_TLS_MODEL STREQUAL "WIN32") | |
| message(STATUS "Use TLS model based on direct Win32 TlsAlloc'd slots (MI_TLS_MODEL=WIN32)") | |
| list(APPEND mi_defines MI_TLS_MODEL_WIN32=1) | |
| elseif(NOT (MI_TLS_MODEL STREQUAL "DEFAULT")) | |
| message(STATUS "Invalid option value: MI_TLS_MODEL=${MI_TLS_MODEL} (ignored)") | |
| endif() | |
| if(MI_TLS_RECURSE_GUARD) | |
| message(STATUS "Use TLS recursion guard (for MI_TLS_MODEL_LOCAL only)") | |
| list(APPEND mi_defines MI_TLS_RECURSE_GUARD=1) | |
| endif() | |
| if("$ENV{MSYSTEM}" STREQUAL "UCRT64") | |
| message(STATUS "Detected MSYS2 UCRT64 environment") | |
| set(MI_MINGW_UCRT64 "ON") | |
| list(APPEND mi_defines MI_MINGW_UCRT64=1) | |
| elseif("$ENV{MSYSTEM}" STREQUAL "MSYS") | |
| message(STATUS "Detected MSYS2 MSYS/Cygwin environment") | |
| set(MI_CYGWIN "ON") | |
| endif() | |
| if(MI_WIN_DIRECT_TLS) | |
| message(STATUS "Use only direct TLS slots on Windows to avoid extra tests in the malloc fast path -- this only works if the program uses less than 64 TlsAlloc'd slots in total! (MI_WIN_USE_ONLY_DIRECT_TLS=ON)") | |
| list(APPEND mi_defines MI_WIN_DIRECT_TLS=1) | |
| endif() | |
| if(MI_WIN_INIT STREQUAL "DEFAULT") | |
| if(MI_WIN_INIT_USE_RAW_DLLMAIN) | |
| message(STATUS "Use of MI_WIN_INIT_USE_RAW_DLLMAIN is deprecated, use MI_WIN_INIT=RAW_DLLMAIN instead") | |
| set(MI_WIN_INIT "RAW_DLLMAIN") | |
| elseif(MI_WIN_INIT_USE_TLS_DLLMAIN) | |
| message(STATUS "Use of MI_WIN_INIT_USE_TLS_DLLMAIN is deprecated, use MI_WIN_INIT=TLS_DLLMAIN instead") | |
| set(MI_WIN_INIT "TLS_DLLMAIN") | |
| elseif(MI_WIN_USE_FLS) | |
| message(STATUS "Use of MI_WIN_USE_FLS is deprecated, use MI_WIN_INIT=FLS instead") | |
| set(MI_WIN_INIT "FLS") | |
| endif() | |
| endif() | |
| if(MI_WIN_INIT STREQUAL "RAW_DLLMAIN") | |
| message(STATUS "Use raw Dll main entry on Windows to initialize and finalize mimalloc (MI_WIN_INIT=RAW_DLLMAIN)") | |
| message(STATUS "Note: this can lead to link errors if other libraries also try to define a raw Dll main entry point") | |
| list(APPEND mi_defines MI_WIN_INIT_USE_RAW_DLLMAIN=1) | |
| elseif(MI_WIN_INIT STREQUAL "TLS_DLLMAIN") | |
| message(STATUS "Use Dll main entry with TLS entries on Windows to initialize and finalize mimalloc (MI_WIN_INIT=TLS_DLLMAIN)") | |
| list(APPEND mi_defines MI_WIN_INIT_USE_TLS_DLLMAIN=1) | |
| elseif(MI_WIN_INIT STREQUAL "FLS") | |
| message(STATUS "Use the Fiber API to detect thread termination (deprecated) (MI_WIN_INIT=FLS)") | |
| list(APPEND mi_defines MI_WIN_INIT_USE_FLS=1) | |
| elseif(NOT (MI_WIN_INIT STREQUAL "DEFAULT")) | |
| message(STATUS "Invalid option value: MI_WIN_INIT=${MI_WIN_INIT} (ignored)") | |
| endif() | |
| if(MI_ARCH MATCHES "riscv") | |
| CHECK_INCLUDE_FILES("asm/hwprobe.h" MI_HAS_ASM_HWPROBEH) | |
| if (MI_HAS_ASM_HWPROBEH) | |
| list(APPEND mi_defines MI_HAS_ASM_HWPROBEH=1) | |
| endif() | |
| CHECK_INCLUDE_FILES("sys/hwprobe.h" MI_HAS_SYS_HWPROBEH) | |
| if (MI_HAS_SYS_HWPROBEH) | |
| list(APPEND mi_defines MI_HAS_SYS_HWPROBEH=1) | |
| endif() | |
| endif() | |
| # On Haiku use `-DCMAKE_INSTALL_PREFIX` instead, issue #788 | |
| # if(CMAKE_SYSTEM_NAME MATCHES "Haiku") | |
| # SET(CMAKE_INSTALL_LIBDIR ~/config/non-packaged/lib) | |
| # SET(CMAKE_INSTALL_INCLUDEDIR ~/config/non-packaged/headers) | |
| # endif() | |
| # Compiler flags | |
| if(CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang|GNU" AND NOT MI_CLANG_CL) | |
| list(APPEND mi_cflags -Wno-unknown-pragmas -fvisibility=hidden) | |
| if(NOT MI_USE_CXX) | |
| list(APPEND mi_cflags -Wstrict-prototypes) | |
| endif() | |
| if(CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang") | |
| list(APPEND mi_cflags -Wno-static-in-inline -mno-outline) | |
| endif() | |
| if(CMAKE_C_COMPILER_ID STREQUAL "AppleClang" AND MI_ARCH STREQUAL "arm64") | |
| list(APPEND mi_cflags -Xclang -fno-split-cold-code) | |
| endif() | |
| endif() | |
| if(CMAKE_C_COMPILER_ID MATCHES "Intel") | |
| list(APPEND mi_cflags -fvisibility=hidden) | |
| endif() | |
| if(CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang|GNU|Intel" AND NOT CMAKE_SYSTEM_NAME MATCHES "Haiku" AND NOT MI_CLANG_CL) | |
| if(MI_TLS_MODEL STREQUAL "LOCAL_DYNAMIC") | |
| list(APPEND mi_cflags -ftls-model=local-dynamic) | |
| else() | |
| if(MI_LIBC_MUSL) | |
| # with musl we use local-dynamic for the static build, see issue #644 | |
| list(APPEND mi_cflags_static -ftls-model=local-dynamic) | |
| list(APPEND mi_cflags_dynamic -ftls-model=initial-exec) | |
| message(STATUS "Use local dynamic TLS for the static build (since MI_LIBC_MUSL=ON)") | |
| else() | |
| list(APPEND mi_cflags -ftls-model=initial-exec) | |
| endif() | |
| endif() | |
| endif() | |
| if(CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang|GNU|Intel") | |
| if(MI_OVERRIDE) | |
| list(APPEND mi_cflags -fno-builtin-malloc) | |
| endif() | |
| endif() | |
| # Compiler and architecture specific flags | |
| if(MI_OPT_ARCH MATCHES "^(1|ON|YES|TRUE|Y)$") | |
| if(APPLE AND CMAKE_OSX_ARCHITECTURES AND CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang" ) | |
| set(MI_OPT_ARCH "ON") | |
| elseif(MI_ARCH STREQUAL "arm64") | |
| if(APPLE) | |
| set(MI_OPT_ARCH "armv8.3") # M1+ supports arm8.3-a (which includes LDAPR (load-aquire)) | |
| else() | |
| set(MI_OPT_ARCH "armv8.1") # enable armv8.1-a by default (which has fast atomics) | |
| endif() | |
| elseif(MI_ARCH STREQUAL "arm32") | |
| set(MI_OPT_ARCH "armv8.1") # enable armv8.1-a by default (which has fast atomics) | |
| elseif(MI_ARCH STREQUAL "x64") | |
| set(MI_OPT_ARCH "avx2") | |
| elseif(MI_ARCH MATCHES "riscv") | |
| set(MI_OPT_ARCH "rv${MI_ARCH_BITS}gcb_zacas") # fast bit scan and atomics (since 2023) | |
| # set(MI_OPT_ARCH "rv${MI_ARCH_BITS}gcb_zacas_zalasr") # fast bit scan and atomics (since 2025) | |
| else() | |
| set(MI_OPT_ARCH OFF) | |
| endif() | |
| endif() | |
| # Compiler and architecture specific flags | |
| set(MI_OPT_ARCH_FLAGS "") | |
| if(NOT MI_OPT_ARCH MATCHES "^(0|OFF|NO|FALSE|N)$") | |
| # apple support for multi-arch binaries (#999) | |
| if(APPLE AND CMAKE_OSX_ARCHITECTURES AND CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang") | |
| if("arm64" IN_LIST CMAKE_OSX_ARCHITECTURES) | |
| list(APPEND MI_OPT_ARCH_FLAGS "-Xarch_arm64;-march=armv8.3-a") | |
| endif() | |
| if("x86_64" IN_LIST CMAKE_OSX_ARCHITECTURES) | |
| list(APPEND MI_OPT_ARCH_FLAGS "-Xarch_x86_64;-march=haswell;-Xarch_x86_64;-mavx2") | |
| endif() | |
| # clang/gcc | |
| elseif(CMAKE_C_COMPILER_ID MATCHES "AppleClang|Clang|GNU|Intel" AND NOT CMAKE_SYSTEM_NAME MATCHES "Haiku") | |
| if(MI_OPT_ARCH STREQUAL "avx2") | |
| set(MI_OPT_ARCH_FLAGS "-march=haswell;-mavx2") # fast bit scan (since 2013) | |
| elseif(MI_OPT_ARCH MATCHES "^armv[89].*$") | |
| set(MI_OPT_ARCH_FLAGS "-march=${MI_OPT_ARCH}-a") # fast atomics | |
| elseif(MI_OPT_ARCH MATCHES "^rva[0-9][0-9]$") | |
| set(MI_OPT_ARCH_FLAGS "-march=${MI_OPT_ARCH}u${MI_ARCH_BITS}") | |
| elseif(MI_OPT_ARCH MATCHES "^rv.*$") | |
| set(MI_OPT_ARCH_FLAGS "-march=${MI_OPT_ARCH}") | |
| else() | |
| set(MI_OPT_ARCH_FLAGS "-march=${MI_OPT_ARCH}") | |
| message(STATUS "warning: unknown MI_OPT_ARCH=${MI_OPT_ARCH} passed as '-march=${MI_OPT_ARCH}'") | |
| endif() | |
| # msvc | |
| elseif (MSVC AND MSVC_VERSION GREATER_EQUAL 1914 AND NOT MI_CLANG_CL) # vs2017+ | |
| if(MI_OPT_ARCH STREQUAL "avx2") | |
| set(MI_OPT_ARCH_FLAGS "/arch:AVX2") | |
| elseif(MI_OPT_ARCH MATCHES "^armv[89].*$") | |
| set(MI_OPT_ARCH_FLAGS "/arch:${MI_OPT_ARCH}") # fast atomics | |
| else() | |
| message(STATUS "warning: unknown MI_OPT_ARCH=${MI_OPT_ARCH} passed as '/arch:${MI_OPT_ARCH}'") | |
| endif() | |
| endif() | |
| endif() | |
| if(MINGW) | |
| add_definitions(-D_WIN32_WINNT=0x600) # issue #976 | |
| endif() | |
| if(MI_OPT_ARCH_FLAGS) | |
| list(APPEND mi_cflags ${MI_OPT_ARCH_FLAGS}) | |
| message(STATUS "Architecture specific optimization is enabled (with ${MI_OPT_ARCH_FLAGS}) (MI_OPT_ARCH=${MI_OPT_ARCH})") | |
| if (MI_OPT_SIMD) | |
| list(APPEND mi_defines "MI_OPT_SIMD=1") | |
| message(STATUS "SIMD instructions are enabled (MI_OPT_SIMD=ON)") | |
| endif() | |
| elseif(MI_OPT_SIMD) | |
| message(STATUS "SIMD instructions are not enabled (either MI_OPT_ARCH=OFF or this architecture has no SIMD support)") | |
| endif() | |
| # extra needed libraries | |
| # we prefer -l<lib> test over `find_library` as sometimes core libraries | |
| # like `libatomic` are not on the system path (see issue #898) | |
| function(find_link_library libname outlibname) | |
| check_linker_flag(C "-l${libname}" mi_has_lib${libname}) | |
| if (mi_has_lib${libname}) | |
| message(VERBOSE "link library: -l${libname}") | |
| set(${outlibname} ${libname} PARENT_SCOPE) | |
| else() | |
| find_library(MI_LIBPATH_${libname} ${libname}) | |
| if (MI_LIBPATH_${libname}) | |
| message(VERBOSE "link library ${libname} at ${MI_LIBPATH_${libname}}") | |
| set(${outlibname} ${MI_LIBPATH_${libname}} PARENT_SCOPE) | |
| else() | |
| message(VERBOSE "link library not found: ${libname}") | |
| set(${outlibname} "" PARENT_SCOPE) | |
| endif() | |
| endif() | |
| endfunction() | |
| if(WIN32) | |
| list(APPEND mi_libraries psapi shell32 user32 advapi32 bcrypt) | |
| else() | |
| find_link_library("pthread" MI_LIB_PTHREAD) | |
| if(MI_LIB_PTHREAD) | |
| list(APPEND mi_libraries "${MI_LIB_PTHREAD}") | |
| endif() | |
| find_link_library("rt" MI_LIB_RT) | |
| if(MI_LIB_RT) | |
| list(APPEND mi_libraries "${MI_LIB_RT}") | |
| endif() | |
| find_link_library("atomic" MI_LIB_ATOMIC) | |
| if(MI_LIB_ATOMIC) | |
| list(APPEND mi_libraries "${MI_LIB_ATOMIC}") | |
| endif() | |
| endif() | |
| # set language for source files now | |
| if(MI_USE_CXX) | |
| set_source_files_properties(${mi_sources} PROPERTIES LANGUAGE CXX ) | |
| set_source_files_properties(src/static.c test/test-api.c test/test-api-fill.c test/test-stress.c test/test-stress-heaps.c test/test-stress-subprocs.c test/test-stress-pprof.c test/test-profile.c test/test-pprof.c PROPERTIES LANGUAGE CXX ) | |
| endif() | |
| # platform specific headers that are only needed for profiling support | |
| if(NOT WIN32 AND MI_PROFILE) | |
| CHECK_INCLUDE_FILES("unistd.h" MI_HAS_UNISTDH) | |
| if(MI_HAS_UNISTDH) | |
| list(APPEND mi_defines MI_HAS_UNISTDH=1) | |
| endif() | |
| CHECK_INCLUDE_FILES("execinfo.h" MI_HAS_EXECINFOH) | |
| if(MI_HAS_EXECINFOH) | |
| list(APPEND mi_defines MI_HAS_EXECINFOH=1) | |
| # On FreeBSD (and some other BSDs) `backtrace`/`backtrace_symbols` are not part of | |
| # libc but live in a separate `libexecinfo` that must be linked explicitly. | |
| if(CMAKE_SYSTEM_NAME MATCHES "BSD|DragonFly") | |
| find_link_library("execinfo" MI_LIB_EXECINFO) | |
| if(MI_LIB_EXECINFO) | |
| list(APPEND mi_libraries "${MI_LIB_EXECINFO}") | |
| endif() | |
| endif() | |
| else() | |
| # No `execinfo.h` available (e.g. musl-based Linux distributions such as Alpine | |
| # do not implement `backtrace`); fall back to `libunwind` if it is installed. | |
| CHECK_INCLUDE_FILES("libunwind.h" MI_HAS_LIBUNWINDH) | |
| if(MI_HAS_LIBUNWINDH) | |
| find_link_library("unwind" MI_LIB_UNWIND) | |
| if(MI_LIB_UNWIND) | |
| list(APPEND mi_defines MI_HAS_LIBUNWINDH=1) | |
| list(APPEND mi_libraries "${MI_LIB_UNWIND}") | |
| endif() | |
| else() | |
| message(WARNING "No backtrace support available: neither execinfo.h nor libunwind.h found.") | |
| if(EXISTS "/etc/alpine-release") | |
| message(STATUS "(On Alpine Linux, use `apk add libunwind-dev` to add the libunwind library)") | |
| endif() | |
| endif() | |
| endif() | |
| # FreeBSD (and DragonFly) need `kinfo_getvmmap` (in `libutil`) to collect the | |
| # process's memory mappings (used for module/library info in dumped profiles). | |
| if(CMAKE_SYSTEM_NAME MATCHES "FreeBSD|DragonFly") | |
| find_link_library("util" MI_LIB_UTIL) | |
| if(MI_LIB_UTIL) | |
| list(APPEND mi_libraries "${MI_LIB_UTIL}") | |
| endif() | |
| endif() | |
| endif() | |
| # ----------------------------------------------------------------------------- | |
| # Install and output names | |
| # ----------------------------------------------------------------------------- | |
| # dynamic/shared library and symlinks always go to /usr/local/lib equivalent | |
| # we use ${CMAKE_INSTALL_BINDIR} and ${CMAKE_INSTALL_LIBDIR}. | |
| # static libraries and object files, includes, and cmake config files | |
| # are either installed at top level, or use versioned directories for side-by-side installation (default) | |
| if (MI_INSTALL_TOPLEVEL) | |
| set(mi_install_objdir "${CMAKE_INSTALL_LIBDIR}") | |
| set(mi_install_incdir "${CMAKE_INSTALL_INCLUDEDIR}") | |
| set(mi_install_cmakedir "${CMAKE_INSTALL_LIBDIR}/cmake/mimalloc") | |
| else() | |
| set(mi_install_objdir "${CMAKE_INSTALL_LIBDIR}/mimalloc-${mi_version}") # for static library and object files | |
| set(mi_install_incdir "${CMAKE_INSTALL_INCLUDEDIR}/mimalloc-${mi_version}") # for includes | |
| set(mi_install_cmakedir "${CMAKE_INSTALL_LIBDIR}/cmake/mimalloc-${mi_version}") # for cmake package info | |
| endif() | |
| set(mi_libname "mimalloc") | |
| if(MI_SECURE) | |
| set(mi_libname "${mi_libname}-secure") | |
| endif() | |
| if(MI_TRACK STREQUAL "VALGRIND") | |
| set(mi_libname "${mi_libname}-valgrind") | |
| endif() | |
| if(MI_TRACK STREQUAL "ASAN") | |
| set(mi_libname "${mi_libname}-asan") | |
| endif() | |
| set(mi_libname_base "${mi_libname}") # capture the base name (without any per-config suffix) | |
| if (CMAKE_CONFIGURATION_TYPES) | |
| # multi-config builds | |
| # generator expression lower-case build type | |
| set(mi_gx_build_type_lc $<LOWER_CASE:$<CONFIG>>) | |
| # generator expression for "is this a release build?" | |
| set(mi_gx_release $<OR:$<CONFIG:Release>,$<CONFIG:RelWithDebInfo>,$<CONFIG:MinSizeRel>,$<CONFIG:none>>) | |
| list(APPEND mi_defines "MI_CMAKE_BUILD_TYPE=${mi_gx_build_type_lc}") | |
| list(APPEND mi_defines $<${mi_gx_release}:MI_BUILD_RELEASE>) | |
| # append build type (e.g. -debug) if not a release version | |
| set(mi_libname "${mi_libname}$<$<NOT:${mi_gx_release}>:-${mi_gx_build_type_lc}>") | |
| else() | |
| # single-config builds | |
| string(TOLOWER "${CMAKE_BUILD_TYPE}" CMAKE_BUILD_TYPE_LC) | |
| list(APPEND mi_defines "MI_CMAKE_BUILD_TYPE=${CMAKE_BUILD_TYPE_LC}") #todo: multi-config project needs $<CONFIG> ? | |
| if(CMAKE_BUILD_TYPE_LC MATCHES "^(release|relwithdebinfo|minsizerel|none)$") | |
| list(APPEND mi_defines MI_BUILD_RELEASE) | |
| else() | |
| set(mi_libname "${mi_libname}-${CMAKE_BUILD_TYPE_LC}") #append build type (e.g. -debug) if not a release version | |
| endif() | |
| endif() | |
| string(REGEX REPLACE "^mimalloc[-]?" "" mi_libsuffix "${mi_libname}") | |
| if(MI_BUILD_SHARED) | |
| list(APPEND mi_build_targets "shared") | |
| endif() | |
| if(MI_BUILD_STATIC) | |
| list(APPEND mi_build_targets "static") | |
| endif() | |
| if(MI_BUILD_OBJECT) | |
| list(APPEND mi_build_targets "object") | |
| endif() | |
| if(MI_BUILD_TESTS) | |
| list(APPEND mi_build_targets "tests") | |
| endif() | |
| message(STATUS "") | |
| message(STATUS "Library name : ${mi_libname}") | |
| message(STATUS "Version : ${mi_version}.${mi_version_patch}") | |
| if(CMAKE_BUILD_TYPE_LC) | |
| message(STATUS "Build type : ${CMAKE_BUILD_TYPE_LC}") | |
| endif() | |
| if(MI_USE_CXX) | |
| message(STATUS "C++ Compiler : ${CMAKE_CXX_COMPILER}") | |
| else() | |
| message(STATUS "C Compiler : ${CMAKE_C_COMPILER}") | |
| endif() | |
| message(STATUS "Compiler flags : ${mi_cflags}") | |
| message(STATUS "Compiler defines : ${mi_defines}") | |
| message(STATUS "Link libraries : ${mi_libraries}") | |
| message(STATUS "Build targets : ${mi_build_targets}") | |
| message(STATUS "") | |
| # ----------------------------------------------------------------------------- | |
| # Main targets | |
| # ----------------------------------------------------------------------------- | |
| # shared library | |
| if(MI_BUILD_SHARED) | |
| add_library(mimalloc SHARED ${mi_sources}) | |
| set_target_properties(mimalloc PROPERTIES VERSION ${mi_version} SOVERSION ${mi_version_major} OUTPUT_NAME ${mi_libname} ) | |
| target_compile_definitions(mimalloc PRIVATE ${mi_defines} MI_SHARED_LIB MI_SHARED_LIB_EXPORT) | |
| target_compile_options(mimalloc PRIVATE ${mi_cflags} ${mi_cflags_dynamic}) | |
| target_link_libraries(mimalloc PRIVATE ${mi_libraries}) | |
| target_include_directories(mimalloc PUBLIC | |
| $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include> | |
| $<INSTALL_INTERFACE:${mi_install_incdir}> | |
| ) | |
| install(TARGETS mimalloc EXPORT mimalloc ARCHIVE DESTINATION ${CMAKE_INSTALL_LIBDIR} RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR} LIBRARY DESTINATION ${CMAKE_INSTALL_LIBDIR}) | |
| install(EXPORT mimalloc DESTINATION ${mi_install_cmakedir}) | |
| if(WIN32 AND NOT MINGW) | |
| # On windows, the import library name for the dll would clash with the static mimalloc.lib library | |
| # so we postfix the dll import library with `.dll.lib` (and also the .pdb debug file) | |
| set_property(TARGET mimalloc PROPERTY ARCHIVE_OUTPUT_NAME "${mi_libname}.dll" ) | |
| install(FILES "$<TARGET_FILE_DIR:mimalloc>/${mi_libname}.dll.lib" DESTINATION ${CMAKE_INSTALL_LIBDIR}/mimalloc-${mi_version}) | |
| if (CMAKE_CONFIGURATION_TYPES) | |
| # PDB_NAME only supports generator expressions since CMake 4.1; for multi-config | |
| # generators (like Visual Studio) we instead set `PDB_NAME_<CONFIG>` for each | |
| # known configuration explicitly (mirroring the release/debug suffix logic above). | |
| foreach(mi_cfg IN LISTS CMAKE_CONFIGURATION_TYPES) | |
| string(TOUPPER "${mi_cfg}" mi_cfg_uc) | |
| string(TOLOWER "${mi_cfg}" mi_cfg_lc) | |
| if (mi_cfg_lc MATCHES "^(release|relwithdebinfo|minsizerel|none)$") | |
| set(mi_libname_pdb "${mi_libname_base}") | |
| else() | |
| set(mi_libname_pdb "${mi_libname_base}-${mi_cfg_lc}") | |
| endif() | |
| set_property(TARGET mimalloc PROPERTY "PDB_NAME_${mi_cfg_uc}" "${mi_libname_pdb}.dll") | |
| endforeach() | |
| else() | |
| set_property(TARGET mimalloc PROPERTY PDB_NAME "${mi_libname}.dll") | |
| endif() | |
| # don't try to install the pdb since it may not be generated depending on the configuration | |
| # install(FILES "$<TARGET_FILE_DIR:mimalloc>/${mi_libname}.dll.pdb" DESTINATION ${CMAKE_INSTALL_LIBDIR}) | |
| endif() | |
| if(WIN32 AND MI_WIN_REDIRECT) | |
| if(MINGW) | |
| set_property(TARGET mimalloc PROPERTY PREFIX "") | |
| endif() | |
| # On windows, link and copy the mimalloc redirection dll too. | |
| if(CMAKE_GENERATOR_PLATFORM STREQUAL "arm64ec") | |
| set(MIMALLOC_REDIRECT_SUFFIX "-arm64ec") | |
| set(MINJECT_SUFFIX "") | |
| elseif(MI_ARCH STREQUAL "x64") | |
| set(MIMALLOC_REDIRECT_SUFFIX "") | |
| set(MINJECT_SUFFIX "") | |
| if(CMAKE_SYSTEM_PROCESSOR STREQUAL "ARM64") | |
| message(STATUS "Note: x64 code emulated on Windows for arm64 should use an arm64ec build of 'mimalloc.dll'") | |
| message(STATUS " together with 'mimalloc-redirect-arm64ec.dll'. See the 'bin\\readme.md' for more information.") | |
| endif() | |
| elseif(MI_ARCH STREQUAL "x86") | |
| set(MIMALLOC_REDIRECT_SUFFIX "32") | |
| set(MINJECT_SUFFIX "32") | |
| else() | |
| set(MIMALLOC_REDIRECT_SUFFIX "-${MI_ARCH}") # -arm64 etc. | |
| set(MINJECT_SUFFIX "-${MI_ARCH}") | |
| endif() | |
| target_link_libraries(mimalloc PRIVATE ${CMAKE_CURRENT_SOURCE_DIR}/bin/mimalloc-redirect${MIMALLOC_REDIRECT_SUFFIX}.lib) # the DLL import library | |
| add_custom_command(TARGET mimalloc POST_BUILD | |
| COMMAND "${CMAKE_COMMAND}" -E copy "${CMAKE_CURRENT_SOURCE_DIR}/bin/mimalloc-redirect${MIMALLOC_REDIRECT_SUFFIX}.dll" $<TARGET_FILE_DIR:mimalloc> | |
| COMMENT "Copy mimalloc-redirect${MIMALLOC_REDIRECT_SUFFIX}.dll to output directory") | |
| install(FILES "$<TARGET_FILE_DIR:mimalloc>/mimalloc-redirect${MIMALLOC_REDIRECT_SUFFIX}.dll" DESTINATION ${CMAKE_INSTALL_BINDIR}) | |
| endif() | |
| endif() | |
| # static library | |
| if (MI_BUILD_STATIC) | |
| add_library(mimalloc-static STATIC ${mi_sources}) | |
| set_property(TARGET mimalloc-static PROPERTY OUTPUT_NAME ${mi_libname}) | |
| set_property(TARGET mimalloc-static PROPERTY POSITION_INDEPENDENT_CODE ON) | |
| target_compile_definitions(mimalloc-static PRIVATE ${mi_defines} MI_STATIC_LIB) | |
| target_compile_options(mimalloc-static PRIVATE ${mi_cflags} ${mi_cflags_static}) | |
| target_link_libraries(mimalloc-static PRIVATE ${mi_libraries}) | |
| target_include_directories(mimalloc-static PUBLIC | |
| $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include> | |
| $<INSTALL_INTERFACE:${mi_install_incdir}> | |
| ) | |
| install(TARGETS mimalloc-static EXPORT mimalloc DESTINATION ${mi_install_objdir} LIBRARY) | |
| install(EXPORT mimalloc DESTINATION ${mi_install_cmakedir}) | |
| endif() | |
| # install include files | |
| install(FILES include/mimalloc.h DESTINATION ${mi_install_incdir}) | |
| install(FILES include/mimalloc-override.h DESTINATION ${mi_install_incdir}) | |
| install(FILES include/mimalloc-new-delete.h DESTINATION ${mi_install_incdir}) | |
| install(FILES include/mimalloc-stats.h DESTINATION ${mi_install_incdir}) | |
| install(FILES cmake/mimalloc-config.cmake DESTINATION ${mi_install_cmakedir}) | |
| install(FILES cmake/mimalloc-config-version.cmake DESTINATION ${mi_install_cmakedir}) | |
| # single object file for more predictable static overriding | |
| if (MI_BUILD_OBJECT) | |
| add_library(mimalloc-obj OBJECT src/static.c) | |
| set_property(TARGET mimalloc-obj PROPERTY POSITION_INDEPENDENT_CODE ON) | |
| # set_property(TARGET mimalloc-obj APPEND PROPERTY OBJECT_DEPENDS ${mi_sources}) | |
| target_compile_definitions(mimalloc-obj PRIVATE ${mi_defines}) | |
| target_compile_options(mimalloc-obj PRIVATE ${mi_cflags} ${mi_cflags_static}) | |
| target_include_directories(mimalloc-obj PUBLIC | |
| $<BUILD_INTERFACE:${CMAKE_CURRENT_SOURCE_DIR}/include> | |
| $<INSTALL_INTERFACE:${mi_install_incdir}> | |
| ) | |
| # Copy the generated object file (`static.o`) to the output directory (as `mimalloc.o`) | |
| set(mimalloc-obj-static "$<TARGET_OBJECTS:mimalloc-obj>") | |
| set(mimalloc-obj-out "${CMAKE_CURRENT_BINARY_DIR}/${mi_libname}${CMAKE_C_OUTPUT_EXTENSION}") | |
| add_custom_command(OUTPUT ${mimalloc-obj-out} DEPENDS mimalloc-obj mimalloc-static COMMAND "${CMAKE_COMMAND}" -E copy "${mimalloc-obj-static}" "${mimalloc-obj-out}") | |
| add_custom_target(mimalloc-obj-target ALL DEPENDS ${mimalloc-obj-out}) | |
| # the following seems to lead to cmake warnings/errors on some systems, disable for now :-( | |
| # install(TARGETS mimalloc-obj EXPORT mimalloc DESTINATION ${mi_install_objdir}) | |
| # the FILES expression can also be: $<TARGET_OBJECTS:mimalloc-obj> | |
| # but that fails cmake versions less than 3.10 so we leave it as is for now | |
| install(FILES ${mimalloc-obj-static} | |
| DESTINATION ${mi_install_objdir} | |
| RENAME ${mi_libname}${CMAKE_C_OUTPUT_EXTENSION} ) | |
| endif() | |
| # pkg-config file support | |
| set(mi_pc_libraries "") | |
| foreach(item IN LISTS mi_libraries) | |
| if(item MATCHES " *[-].*") | |
| set(mi_pc_libraries "${mi_pc_libraries} ${item}") | |
| else() | |
| set(mi_pc_libraries "${mi_pc_libraries} -l${item}") | |
| endif() | |
| endforeach() | |
| include("cmake/JoinPaths.cmake") | |
| join_paths(mi_pc_includedir "\${prefix}" "${CMAKE_INSTALL_INCLUDEDIR}") | |
| join_paths(mi_pc_libdir "\${prefix}" "${CMAKE_INSTALL_LIBDIR}") | |
| configure_file(mimalloc.pc.in mimalloc.pc @ONLY) | |
| install(FILES "${CMAKE_CURRENT_BINARY_DIR}/mimalloc.pc" | |
| DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig/") | |
| # ----------------------------------------------------------------------------- | |
| # API surface testing | |
| # ----------------------------------------------------------------------------- | |
| if (MI_BUILD_TESTS) | |
| enable_testing() | |
| # static link tests | |
| foreach(TEST_NAME api api-fill stress-heaps stress-subprocs stress stress-pprof profile pprof) | |
| add_executable(mimalloc-test-${TEST_NAME} test/test-${TEST_NAME}.c) | |
| target_compile_definitions(mimalloc-test-${TEST_NAME} PRIVATE ${mi_defines}) | |
| target_compile_options(mimalloc-test-${TEST_NAME} PRIVATE ${mi_cflags}) | |
| target_include_directories(mimalloc-test-${TEST_NAME} PRIVATE include) | |
| if(MI_BUILD_STATIC AND NOT MI_DEBUG_TSAN) | |
| target_link_libraries(mimalloc-test-${TEST_NAME} PRIVATE mimalloc-static ${mi_libraries}) | |
| elseif(MI_BUILD_SHARED) | |
| target_link_libraries(mimalloc-test-${TEST_NAME} PRIVATE mimalloc ${mi_libraries}) | |
| else() | |
| message(STATUS "cannot build TSAN tests without MI_BUILD_SHARED being enabled") | |
| endif() | |
| if(MI_GUARDED AND NOT (TEST_NAME STREQUAL "profile" OR TEST_NAME STREQUAL "pprof" OR TEST_NAME STREQUAL "stress-pprof")) | |
| add_test(NAME test-${TEST_NAME} COMMAND ${CMAKE_COMMAND} -E env MIMALLOC_GUARDED_SAMPLE_RATE=1024 $<TARGET_FILE:mimalloc-test-${TEST_NAME}>) | |
| elseif(TEST_NAME STREQUAL "stress-heaps") | |
| add_test(NAME test-${TEST_NAME} COMMAND ${CMAKE_COMMAND} -E env MIMALLOC_ARENA_EAGER_COMMIT=0 MIMALLOC_PAGE_COMMIT_ON_DEMAND=0 $<TARGET_FILE:mimalloc-test-${TEST_NAME}>) | |
| elseif((NOT MI_PROFILE) AND (TEST_NAME STREQUAL "profile" OR TEST_NAME STREQUAL "pprof" OR TEST_NAME STREQUAL "stress-pprof")) | |
| # don't add as a test | |
| elseif(NOT APPLE AND (TEST_NAME STREQUAL "pprof" OR TEST_NAME STREQUAL "stress-pprof")) | |
| # don't add as a test | |
| else() | |
| add_test(NAME test-${TEST_NAME} COMMAND mimalloc-test-${TEST_NAME}) | |
| endif() | |
| endforeach() | |
| # static override test | |
| if(MI_BUILD_OBJECT AND MI_OVERRIDE AND NOT (MI_CYGWIN OR (MI_TRACK STREQUAL "ASAN") OR MI_DEBUG_TSAN OR MI_DEBUG_UBSAN)) | |
| add_executable(mimalloc-test-stress-static test/test-stress.c) | |
| target_compile_definitions(mimalloc-test-stress-static PRIVATE ${mi_defines} "USE_STD_MALLOC=1") | |
| target_compile_options(mimalloc-test-stress-static PRIVATE ${mi_cflags}) | |
| target_include_directories(mimalloc-test-stress-static PRIVATE include) | |
| target_link_libraries(mimalloc-test-stress-static PRIVATE mimalloc-obj ${mi_libraries}) # override statically with an object file | |
| add_test(NAME test-stress-static COMMAND ${CMAKE_COMMAND} -E env MIMALLOC_VERBOSE=1 MIMALLOC_SHOW_STATS=1 $<TARGET_FILE:mimalloc-test-stress-static>) | |
| endif() | |
| # dynamic override test | |
| if(MI_BUILD_SHARED AND MI_OVERRIDE AND NOT (MI_CYGWIN OR (MI_TRACK STREQUAL "ASAN") OR MI_DEBUG_TSAN OR MI_DEBUG_UBSAN)) # AND NOT (APPLE AND MI_USE_CXX)) | |
| add_executable(mimalloc-test-stress-dynamic test/test-stress.c) | |
| target_compile_definitions(mimalloc-test-stress-dynamic PRIVATE ${mi_defines} "USE_STD_MALLOC=1") | |
| target_compile_options(mimalloc-test-stress-dynamic PRIVATE ${mi_cflags}) | |
| target_include_directories(mimalloc-test-stress-dynamic PRIVATE include) | |
| if(WIN32) | |
| target_compile_definitions(mimalloc-test-stress-dynamic PRIVATE "MI_LINK_VERSION=1") # link mi_version | |
| target_link_libraries(mimalloc-test-stress-dynamic PRIVATE mimalloc ${mi_libraries}) # link mi_version | |
| if(MI_MINGW_UCRT64) | |
| # mingw always links mimalloc after system libraries. | |
| # post-process with `minject` to make sure mimalloc is the first dll in the load order. | |
| add_custom_command(TARGET mimalloc-test-stress-dynamic POST_BUILD COMMAND ${CMAKE_CURRENT_SOURCE_DIR}/bin/minject${MINJECT_SUFFIX} --postfix=${mi_libsuffix} -f -i $<TARGET_FILE:mimalloc-test-stress-dynamic>) | |
| endif() | |
| add_test(NAME test-stress-dynamic COMMAND ${CMAKE_COMMAND} -E env MIMALLOC_VERBOSE=1 $<TARGET_FILE:mimalloc-test-stress-dynamic>) | |
| else() | |
| target_link_libraries(mimalloc-test-stress-dynamic PRIVATE ${mi_libraries}) # pthreads, issue 1158 | |
| if(APPLE) | |
| set(LD_PRELOAD "DYLD_INSERT_LIBRARIES") | |
| else() | |
| set(LD_PRELOAD "LD_PRELOAD") | |
| endif() | |
| add_test(NAME test-stress-dynamic COMMAND ${CMAKE_COMMAND} -E env MIMALLOC_VERBOSE=1 ${LD_PRELOAD}=$<TARGET_FILE:mimalloc> $<TARGET_FILE:mimalloc-test-stress-dynamic>) | |
| endif() | |
| endif() | |
| endif() | |
| # ----------------------------------------------------------------------------- | |
| # Set override properties | |
| # ----------------------------------------------------------------------------- | |
| if (MI_OVERRIDE) | |
| if (MI_BUILD_SHARED) | |
| target_compile_definitions(mimalloc PRIVATE MI_MALLOC_OVERRIDE) | |
| endif() | |
| if (MI_BUILD_STATIC) | |
| target_compile_definitions(mimalloc-static PRIVATE MI_MALLOC_OVERRIDE) | |
| endif() | |
| if (MI_BUILD_OBJECT) | |
| target_compile_definitions(mimalloc-obj PRIVATE MI_MALLOC_OVERRIDE) | |
| endif() | |
| endif() |