zlib 1.2.2.4
diff --git a/ChangeLog b/ChangeLog
index 855303b..105a7cb 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,6 +1,30 @@
ChangeLog file for zlib
+Changes in 1.2.2.4 (11 July 2005)
+- Add inflatePrime() function for starting inflation at bit boundary
+- Avoid some Visual C warnings in deflate.c
+- Avoid more silly Visual C warnings in inflate.c and inftrees.c for 64-bit
+ compile
+- Fix some spelling errors in comments [Betts]
+- Correct inflateInit2() error return documentation in zlib.h
+- Added zran.c example of compressed data random access to examples
+ directory, shows use of inflatePrime()
+- Fix cast for assignments to strm->state in inflate.c and infback.c
+- Fix zlibCompileFlags() in zutil.c to use 1L for long shifts [Oberhumer]
+- Move declarations of gf2 functions to right place in crc32.c [Oberhumer]
+- Add cast in trees.c t avoid a warning [Oberhumer]
+- Avoid some warnings in fitblk.c, gun.c, gzjoin.c in examples [Oberhumer]
+- Update make_vms.com [Zinser]
+- Initialize state->write in inflateReset() since copied in inflate_fast()
+- Be more strict on incomplete code sets in inflate_table() and increase
+ ENOUGH and MAXD -- this repairs a possible security vulnerability for
+ invalid inflate input. Thanks to Tavis Ormandy and Markus Oberhumer for
+ discovering the vulnerability and providing test cases.
+- Add ia64 support to configure for HP-UX [Smith]
+- Add error return to gzread() for format or i/o error [Levin]
+- Use malloc.h for OS/2 [Necasek]
+
Changes in 1.2.2.3 (27 May 2005)
- Replace 1U constants in inflate.c and inftrees.c for 64-bit compile
- Typecast fread() return values in gzio.c [Vollant]
@@ -511,7 +535,7 @@
Changes in 1.0.6 (19 Jan 1998)
- add functions gzprintf, gzputc, gzgetc, gztell, gzeof, gzseek, gzrewind and
gzsetparams (thanks to Roland Giersig and Kevin Ruland for some of this code)
-- Fix a deflate bug occuring only with compression level 0 (thanks to
+- Fix a deflate bug occurring only with compression level 0 (thanks to
Andy Buckler for finding this one).
- In minigzip, pass transparently also the first byte for .Z files.
- return Z_BUF_ERROR instead of Z_OK if output buffer full in uncompress()
diff --git a/Makefile b/Makefile
index 535779d..26f63cd 100644
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
# Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2005 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
@@ -30,7 +30,7 @@
LIBS=libz.a
SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.2.3
+SHAREDLIBV=libz.so.1.2.2.4
SHAREDLIBM=libz.so.1
AR=ar rc
diff --git a/Makefile.in b/Makefile.in
index 535779d..26f63cd 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,5 +1,5 @@
# Makefile for zlib
-# Copyright (C) 1995-2003 Jean-loup Gailly.
+# Copyright (C) 1995-2005 Jean-loup Gailly.
# For conditions of distribution and use, see copyright notice in zlib.h
# To compile and test, type:
@@ -30,7 +30,7 @@
LIBS=libz.a
SHAREDLIB=libz.so
-SHAREDLIBV=libz.so.1.2.2.3
+SHAREDLIBV=libz.so.1.2.2.4
SHAREDLIBM=libz.so.1
AR=ar rc
diff --git a/README b/README
index 9bba2e4..3c8e1d4 100644
--- a/README
+++ b/README
@@ -1,6 +1,6 @@
ZLIB DATA COMPRESSION LIBRARY
-zlib 1.2.2.3 is a general purpose data compression library. All the code is
+zlib 1.2.2.4 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -33,7 +33,7 @@
issue of Dr. Dobb's Journal; a copy of the article is available in
http://dogma.net/markn/articles/zlibtool/zlibtool.htm
-The changes made in version 1.2.2.3 are documented in the file ChangeLog.
+The changes made in version 1.2.2.4 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory "contrib".
diff --git a/as400/zlib.inc b/as400/zlib.inc
index 2905ee0..263677d 100644
--- a/as400/zlib.inc
+++ b/as400/zlib.inc
@@ -1,7 +1,7 @@
* ZLIB.INC - Interface to the general purpose compression library
*
* ILE RPG400 version by Patrick Monnerat, DATASPHERE.
- * Version 1.2.2.3
+ * Version 1.2.2.4
*
*
* WARNING:
@@ -22,8 +22,8 @@
*
* Versioning information.
*
- D ZLIB_VERSION C '1.2.2.3'
- D ZLIB_VERNUM C X'1223'
+ D ZLIB_VERSION C '1.2.2.4'
+ D ZLIB_VERNUM C X'1224'
*
* Other equates.
*
diff --git a/configure b/configure
index e3ea897..d7ffdc3 100755
--- a/configure
+++ b/configure
@@ -82,9 +82,16 @@
QNX*) # This is for QNX6. I suppose that the QNX rule below is for QNX2,QNX4
# (alain.bonnefoy@icbt.com)
LDSHARED=${LDSHARED-"$cc -shared -Wl,-hlibz.so.1"};;
- HP-UX*) LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+ HP-UX*)
+ LDSHARED=${LDSHARED-"$cc -shared $SFLAGS"}
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ ia64)
+ shared_ext='.so'
+ SHAREDLIB='libz.so';;
+ *)
shared_ext='.sl'
SHAREDLIB='libz.sl';;
+ esac;;
Darwin*) shared_ext='.dylib'
SHAREDLIB=libz$shared_ext
SHAREDLIBV=libz.$VER$shared_ext
@@ -100,8 +107,14 @@
CFLAGS=${CFLAGS-"-O"}
# LDSHARED=${LDSHARED-"ld -b +vnocompatwarnings"}
LDSHARED=${LDSHARED-"ld -b"}
+ case `(uname -m || echo unknown) 2>/dev/null` in
+ ia64)
+ shared_ext='.so'
+ SHAREDLIB='libz.so';;
+ *)
shared_ext='.sl'
SHAREDLIB='libz.sl';;
+ esac;;
IRIX*) SFLAGS=${CFLAGS-"-ansi -O2 -rpath ."}
CFLAGS=${CFLAGS-"-ansi -O2"}
LDSHARED=${LDSHARED-"cc -shared"};;
diff --git a/contrib/infback9/inftree9.c b/contrib/infback9/inftree9.c
index ac4575c..9e37840 100644
--- a/contrib/infback9/inftree9.c
+++ b/contrib/infback9/inftree9.c
@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate9_copyright[] =
- " inflate9 1.2.2.3 Copyright 1995-2005 Mark Adler ";
+ " inflate9 1.2.2.4 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
- 133, 133, 133, 133, 144, 66, 71};
+ 133, 133, 133, 133, 144, 206, 69};
static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
diff --git a/contrib/vstudio/vc7/zlib.rc b/contrib/vstudio/vc7/zlib.rc
index d0651ec..e9d748f 100644
--- a/contrib/vstudio/vc7/zlib.rc
+++ b/contrib/vstudio/vc7/zlib.rc
@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
- FILEVERSION 1,2,2,3
- PRODUCTVERSION 1,2,2,3
+ FILEVERSION 1,2,2,4
+ PRODUCTVERSION 1,2,2,4
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@
BEGIN
VALUE "FileDescription", "zlib data compression library\0"
- VALUE "FileVersion", "1.2.2.3\0"
+ VALUE "FileVersion", "1.2.2.4\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlib.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
diff --git a/crc32.c b/crc32.c
index 9b1de04..f658a9e 100644
--- a/crc32.c
+++ b/crc32.c
@@ -64,6 +64,11 @@
# define TBLS 1
#endif /* BYFOUR */
+/* Local functions for crc concatenation */
+local unsigned long gf2_matrix_times OF((unsigned long *mat,
+ unsigned long vec));
+local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
+
#ifdef DYNAMIC_CRC_TABLE
local volatile int crc_table_empty = 1;
@@ -72,10 +77,6 @@
#ifdef MAKECRCH
local void write_table OF((FILE *, const unsigned long FAR *));
#endif /* MAKECRCH */
-local unsigned long gf2_matrix_times OF((unsigned long *mat,
- unsigned long vec));
-local void gf2_matrix_square OF((unsigned long *square, unsigned long *mat));
-
/*
Generate tables for a byte-wise 32-bit CRC calculation on the polynomial:
x^32+x^26+x^23+x^22+x^16+x^12+x^11+x^10+x^8+x^7+x^5+x^4+x^2+x+1.
diff --git a/deflate.c b/deflate.c
index 5cd9a92..395c40a 100644
--- a/deflate.c
+++ b/deflate.c
@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
- " deflate 1.2.2.3 Copyright 1995-2005 Jean-loup Gailly ";
+ " deflate 1.2.2.4 Copyright 1995-2005 Jean-loup Gailly ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -600,10 +600,10 @@
(s->gzhead->name == Z_NULL ? 0 : 8) +
(s->gzhead->comment == Z_NULL ? 0 : 16)
);
- put_byte(s, s->gzhead->time & 0xff);
- put_byte(s, (s->gzhead->time >> 8) & 0xff);
- put_byte(s, (s->gzhead->time >> 16) & 0xff);
- put_byte(s, (s->gzhead->time >> 24) & 0xff);
+ put_byte(s, (Byte)(s->gzhead->time & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 8) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 16) & 0xff));
+ put_byte(s, (Byte)((s->gzhead->time >> 24) & 0xff));
put_byte(s, s->level == 9 ? 2 :
(s->strategy >= Z_HUFFMAN_ONLY || s->level < 2 ?
4 : 0));
@@ -651,7 +651,7 @@
#ifdef GZIP
if (s->status == EXTRA_STATE) {
if (s->gzhead->extra != NULL) {
- int beg = s->pending; /* start of bytes to update crc */
+ uInt beg = s->pending; /* start of bytes to update crc */
while (s->gzindex < (s->gzhead->extra_len & 0xffff)) {
if (s->pending == s->pending_buf_size) {
@@ -679,7 +679,7 @@
}
if (s->status == NAME_STATE) {
if (s->gzhead->name != NULL) {
- int beg = s->pending; /* start of bytes to update crc */
+ uInt beg = s->pending; /* start of bytes to update crc */
int val;
do {
@@ -710,7 +710,7 @@
}
if (s->status == COMMENT_STATE) {
if (s->gzhead->comment != NULL) {
- int beg = s->pending; /* start of bytes to update crc */
+ uInt beg = s->pending; /* start of bytes to update crc */
int val;
do {
@@ -742,8 +742,8 @@
if (s->pending + 2 > s->pending_buf_size)
flush_pending(strm);
if (s->pending + 2 <= s->pending_buf_size) {
- put_byte(s, strm->adler & 0xff);
- put_byte(s, (strm->adler >> 8) & 0xff);
+ put_byte(s, (Byte)(strm->adler & 0xff));
+ put_byte(s, (Byte)((strm->adler >> 8) & 0xff));
strm->adler = crc32(0L, Z_NULL, 0);
s->status = BUSY_STATE;
}
@@ -1303,6 +1303,7 @@
later. (Using level 0 permanently is not an optimal usage of
zlib, so we don't care about this pathological case.)
*/
+ /* %%% avoid this when Z_RLE */
n = s->hash_size;
p = &s->head[n];
do {
@@ -1672,3 +1673,64 @@
return flush == Z_FINISH ? finish_done : block_done;
}
#endif /* FASTEST */
+
+#if 0
+/* ===========================================================================
+ * For Z_RLE, simply look for runs of bytes, generate matches only of distance
+ * one. Do not maintain a hash table. (It will be regenerated if this run of
+ * deflate switches away from Z_RLE.)
+ */
+local block_state deflate_rle(s, flush)
+ deflate_state *s;
+ int flush;
+{
+ int bflush; /* set if current block must be flushed */
+ uInt run; /* length of run */
+ uInt max; /* maximum length of run */
+ uInt prev; /* byte at distance one to match */
+ Bytef *scan; /* scan for end of run */
+
+ for (;;) {
+ /* Make sure that we always have enough lookahead, except
+ * at the end of the input file. We need MAX_MATCH bytes
+ * for the longest encodable run.
+ */
+ if (s->lookahead < MAX_MATCH) {
+ fill_window(s);
+ if (s->lookahead < MAX_MATCH && flush == Z_NO_FLUSH) {
+ return need_more;
+ }
+ if (s->lookahead == 0) break; /* flush the current block */
+ }
+
+ /* See how many times the previous byte repeats */
+ run = 0;
+ if (s->strstart > 0) { /* if there is a previous byte, that is */
+ max = s->lookahead < MAX_MATCH ? s->lookahead : MAX_MATCH;
+ scan = s->window + s->strstart - 1;
+ prev = *scan++;
+ do {
+ if (*scan++ != prev)
+ break;
+ } while (++run < max);
+ }
+
+ /* Emit match if have run of MIN_MATCH or longer, else emit literal */
+ if (run >= MIN_MATCH) {
+ check_match(s, s->strstart, s->strstart - 1, run);
+ _tr_tally_dist(s, 1, run - MIN_MATCH, bflush);
+ s->lookahead -= run;
+ s->strstart += run;
+ } else {
+ /* No match, output a literal byte */
+ Tracevv((stderr,"%c", s->window[s->strstart]));
+ _tr_tally_lit (s, s->window[s->strstart], bflush);
+ s->lookahead--;
+ s->strstart++;
+ }
+ if (bflush) FLUSH_BLOCK(s, 0);
+ }
+ FLUSH_BLOCK(s, flush == Z_FINISH);
+ return flush == Z_FINISH ? finish_done : block_done;
+}
+#endif
diff --git a/deflate.h b/deflate.h
index c7c3ffd..05a5ab3 100644
--- a/deflate.h
+++ b/deflate.h
@@ -97,10 +97,10 @@
Bytef *pending_buf; /* output still pending */
ulg pending_buf_size; /* size of pending_buf */
Bytef *pending_out; /* next pending byte to output to the stream */
- int pending; /* nb of bytes in the pending buffer */
+ uInt pending; /* nb of bytes in the pending buffer */
int wrap; /* bit 0 true for zlib, bit 1 true for gzip */
gz_headerp gzhead; /* gzip header information to write */
- int gzindex; /* where in extra, name, or comment */
+ uInt gzindex; /* where in extra, name, or comment */
Byte method; /* STORED (for zip only) or DEFLATED */
int last_flush; /* value of flush param for previous deflate call */
diff --git a/examples/README.examples b/examples/README.examples
index 75e9970..5632d7a 100644
--- a/examples/README.examples
+++ b/examples/README.examples
@@ -35,3 +35,8 @@
reads and writes zlib streams from stdin to stdout
- illustrates the proper use of deflate() and inflate()
- deeply commented in zlib_how.html (see above)
+
+zran.c
+ index a zlib or gzip stream and randomly access it
+ - illustrates the use of Z_BLOCK, inflatePrime(), and
+ inflateSetDictionary() to provide random access
diff --git a/examples/fitblk.c b/examples/fitblk.c
index 5f83114..c61de5c 100644
--- a/examples/fitblk.c
+++ b/examples/fitblk.c
@@ -73,7 +73,7 @@
local int partcompress(FILE *in, z_streamp def)
{
int ret, flush;
- char raw[RAWLEN];
+ unsigned char raw[RAWLEN];
flush = Z_NO_FLUSH;
do {
@@ -96,7 +96,7 @@
local int recompress(z_streamp inf, z_streamp def)
{
int ret, flush;
- char raw[RAWLEN];
+ unsigned char raw[RAWLEN];
flush = Z_NO_FLUSH;
do {
@@ -129,8 +129,8 @@
int ret; /* return code */
unsigned size; /* requested fixed output block size */
unsigned have; /* bytes written by deflate() call */
- char *blk; /* intermediate and final stream */
- char *tmp; /* close to desired size stream */
+ unsigned char *blk; /* intermediate and final stream */
+ unsigned char *tmp; /* close to desired size stream */
z_stream def, inf; /* zlib deflate and inflate states */
/* get requested output size */
@@ -163,8 +163,7 @@
if (ret == Z_STREAM_END && def.avail_out >= EXCESS) {
/* write block to stdout */
have = size + EXCESS - def.avail_out;
- ret = fwrite(blk, 1, have, stdout);
- if (ret != have || ferror(stdout))
+ if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
quit("error writing output");
/* clean up and print results to stderr */
@@ -217,8 +216,7 @@
/* done -- write block to stdout */
have = size - def.avail_out;
- ret = fwrite(blk, 1, have, stdout);
- if (ret != have || ferror(stdout))
+ if (fwrite(blk, 1, have, stdout) != have || ferror(stdout))
quit("error writing output");
/* clean up and print results to stderr */
diff --git a/examples/gun.c b/examples/gun.c
index 1c0d8e5..bfec590 100644
--- a/examples/gun.c
+++ b/examples/gun.c
@@ -1,7 +1,7 @@
/* gun.c -- simple gunzip to give an example of the use of inflateBack()
* Copyright (C) 2003, 2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
- Version 1.2 20 March 2005 Mark Adler */
+ Version 1.3 12 June 2005 Mark Adler */
/* Version history:
1.0 16 Feb 2003 First version for testing of inflateBack()
@@ -14,6 +14,7 @@
Add a bunch of comments
1.2 20 Mar 2005 Add Unix compress (LZW) decompression
Copy file attributes from input file to output file
+ 1.3 12 Jun 2005 Add casts for error messages [Oberhumer]
*/
/*
@@ -221,12 +222,12 @@
if (last == -1)
return Z_BUF_ERROR;
if (flags & 0x60) {
- strm->msg = "unknown lzw flags set";
+ strm->msg = (char *)"unknown lzw flags set";
return Z_DATA_ERROR;
}
max = flags & 0x1f;
if (max < 9 || max > 16) {
- strm->msg = "lzw bits out of range";
+ strm->msg = (char *)"lzw bits out of range";
return Z_DATA_ERROR;
}
if (max == 9) /* 9 doesn't really mean 9 */
@@ -246,7 +247,7 @@
if (NEXT() == -1) /* missing a bit */
return Z_BUF_ERROR;
if (last & 1) { /* code must be < 256 */
- strm->msg = "invalid lzw code";
+ strm->msg = (char *)"invalid lzw code";
return Z_DATA_ERROR;
}
rem = (unsigned)last >> 1; /* remaining 7 bits */
@@ -313,7 +314,7 @@
to detect random or corrupted input after a compress header.
In any case, the prev > end check must be retained. */
if (code != end + 1 || prev > end) {
- strm->msg = "invalid lzw code";
+ strm->msg = (char *)"invalid lzw code";
return Z_DATA_ERROR;
}
match[stack++] = (unsigned char)final;
@@ -394,7 +395,7 @@
break; /* empty gzip stream is ok */
}
if (last != 31 || (NEXT() != 139 && last != 157)) {
- strm->msg = "incorrect header check";
+ strm->msg = (char *)"incorrect header check";
ret = first ? Z_DATA_ERROR : Z_ERRNO;
break; /* not a gzip or compress header */
}
@@ -410,7 +411,7 @@
ret = Z_BUF_ERROR;
if (NEXT() != 8) { /* only deflate method allowed */
if (last == -1) break;
- strm->msg = "unknown compression method";
+ strm->msg = (char *)"unknown compression method";
ret = Z_DATA_ERROR;
break;
}
@@ -423,7 +424,7 @@
NEXT();
if (last == -1) break;
if (flags & 0xe0) {
- strm->msg = "unknown header flags set";
+ strm->msg = (char *)"unknown header flags set";
ret = Z_DATA_ERROR;
break;
}
@@ -476,7 +477,7 @@
NEXT() != ((outd.crc >> 24) & 0xff)) {
/* crc error */
if (last != -1) {
- strm->msg = "incorrect data check";
+ strm->msg = (char *)"incorrect data check";
ret = Z_DATA_ERROR;
}
break;
@@ -487,7 +488,7 @@
NEXT() != ((outd.total >> 24) & 0xff)) {
/* length error */
if (last != -1) {
- strm->msg = "incorrect length check";
+ strm->msg = (char *)"incorrect length check";
ret = Z_DATA_ERROR;
}
break;
@@ -641,7 +642,7 @@
argv++;
test = 0;
if (argc && strcmp(*argv, "-h") == 0) {
- fprintf(stderr, "gun 1.2 (20 Mar 2005)\n");
+ fprintf(stderr, "gun 1.3 (12 Jun 2005)\n");
fprintf(stderr, "Copyright (c) 2005 Mark Adler\n");
fprintf(stderr, "usage: gun [-t] [file1.gz [file2.Z ...]]\n");
return 0;
diff --git a/examples/gzjoin.c b/examples/gzjoin.c
index 7434c5b..129347c 100644
--- a/examples/gzjoin.c
+++ b/examples/gzjoin.c
@@ -26,6 +26,7 @@
* Change history:
*
* 1.0 11 Dec 2004 - First version
+ * 1.1 12 Jun 2005 - Changed ssize_t to long for portability
*/
/*
@@ -118,7 +119,7 @@
1 indicating that end-of-file was reached */
local int bload(bin *in)
{
- ssize_t len;
+ long len;
if (in == NULL)
return -1;
@@ -126,7 +127,7 @@
return 0;
in->next = in->buf;
do {
- len = read(in->fd, in->buf + in->left, CHUNK - in->left);
+ len = (long)read(in->fd, in->buf + in->left, CHUNK - in->left);
if (len < 0)
return -1;
in->left += (unsigned)len;
diff --git a/examples/zran.c b/examples/zran.c
new file mode 100644
index 0000000..8c7717e
--- /dev/null
+++ b/examples/zran.c
@@ -0,0 +1,404 @@
+/* zran.c -- example of zlib/gzip stream indexing and random access
+ * Copyright (C) 2005 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ Version 1.0 29 May 2005 Mark Adler */
+
+/* Illustrate the use of Z_BLOCK, inflatePrime(), and inflateSetDictionary()
+ for random access of a compressed file. A file containing a zlib or gzip
+ stream is provided on the command line. The compressed stream is decoded in
+ its entirety, and an index built with access points about every SPAN bytes
+ in the uncompressed output. The compressed file is left open, and can then
+ be read randomly, having to decompress on the average SPAN/2 uncompressed
+ bytes before getting to the desired block of data.
+
+ An access point can be created at the start of any deflate block, by saving
+ the starting file offset and bit of that block, and the 32K bytes of
+ uncompressed data that precede that block. Also the uncompressed offset of
+ that block is saved to provide a referece for locating a desired starting
+ point in the uncompressed stream. build_index() works by decompressing the
+ input zlib or gzip stream a block at a time, and at the end of each block
+ deciding if enough uncompressed data has gone by to justify the creation of
+ a new access point. If so, that point is saved in a data structure that
+ grows as needed to accommodate the points.
+
+ To use the index, an offset in the uncompressed data is provided, for which
+ the latest accees point at or preceding that offset is located in the index.
+ The input file is positioned to the specified location in the index, and if
+ necessary the first few bits of the compressed data is read from the file.
+ inflate is initialized with those bits and the 32K of uncompressed data, and
+ the decompression then proceeds until the desired offset in the file is
+ reached. Then the decompression continues to read the desired uncompressed
+ data from the file.
+
+ Another approach would be to generate the index on demand. In that case,
+ requests for random access reads from the compressed data would try to use
+ the index, but if a read far enough past the end of the index is required,
+ then further index entries would be generated and added.
+
+ There is some fair bit of overhead to starting inflation for the random
+ access, mainly copying the 32K byte dictionary. So if small pieces of the
+ file are being accessed, it would make sense to implement a cache to hold
+ some lookahead and avoid many calls to extract() for small lengths.
+
+ Another way to build an index would be to use inflateCopy(). That would
+ not be constrained to have access points at block boundaries, but requires
+ more memory per access point, and also cannot be saved to file due to the
+ use of pointers in the state. The approach here allows for storage of the
+ index in a file.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "zlib.h"
+
+#define local static
+
+#define SPAN 1048576L /* desired distance between access points */
+#define WINSIZE 32768U /* sliding window size */
+#define CHUNK 16384 /* file input buffer size */
+
+/* access point entry */
+struct point {
+ off_t out; /* corresponding offset in uncompressed data */
+ off_t in; /* offset in input file of first full byte */
+ int bits; /* number of bits (1-7) from byte at in - 1, or 0 */
+ unsigned char window[WINSIZE]; /* preceding 32K of uncompressed data */
+};
+
+/* access point list */
+struct access {
+ int have; /* number of list entries filled in */
+ int size; /* number of list entries allocated */
+ struct point *list; /* allocated list */
+};
+
+/* Deallocate an index built by build_index() */
+local void free_index(struct access *index)
+{
+ if (index != NULL) {
+ free(index->list);
+ free(index);
+ }
+}
+
+/* Add an entry to the access point list. If out of memory, deallocate the
+ existing list and return NULL. */
+local struct access *addpoint(struct access *index, int bits,
+ off_t in, off_t out, unsigned left, unsigned char *window)
+{
+ struct point *next;
+
+ /* if list is empty, create it (start with eight points) */
+ if (index == NULL) {
+ index = malloc(sizeof(struct access));
+ if (index == NULL) return NULL;
+ index->list = malloc(sizeof(struct point) << 3);
+ if (index->list == NULL) {
+ free(index);
+ return NULL;
+ }
+ index->size = 8;
+ index->have = 0;
+ }
+
+ /* if list is full, make it bigger */
+ else if (index->have == index->size) {
+ index->size <<= 1;
+ next = realloc(index->list, sizeof(struct point) * index->size);
+ if (next == NULL) {
+ free_index(index);
+ return NULL;
+ }
+ index->list = next;
+ }
+
+ /* fill in entry and increment how many we have */
+ next = index->list + index->have;
+ next->bits = bits;
+ next->in = in;
+ next->out = out;
+ if (left)
+ memcpy(next->window, window + WINSIZE - left, left);
+ if (left < WINSIZE)
+ memcpy(next->window + left, window, WINSIZE - left);
+ index->have++;
+
+ /* return list, possibly reallocated */
+ return index;
+}
+
+/* Make one entire pass through the compressed stream and build an index, with
+ access points about every span bytes of uncompressed output -- span is
+ chosen to balance the speed of random access against the memory requirements
+ of the list, about 32K bytes per access point. Note that data after the end
+ of the first zlib or gzip stream in the file is ignored. build_index()
+ returns the number of access points on success (>= 1), Z_MEM_ERROR for out
+ of memory, Z_DATA_ERROR for an error in the input file, or Z_ERRNO for a
+ file read error. On success, *built points to the resulting index. */
+local int build_index(FILE *in, off_t span, struct access **built)
+{
+ int ret;
+ off_t totin, totout; /* our own total counters to avoid 4GB limit */
+ off_t last; /* totout value of last access point */
+ struct access *index; /* access points being generated */
+ z_stream strm;
+ unsigned char input[CHUNK];
+ unsigned char window[WINSIZE];
+
+ /* initialize inflate */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, 47); /* automatic zlib or gzip decoding */
+ if (ret != Z_OK)
+ return ret;
+
+ /* inflate the input, maintain a sliding window, and build an index -- this
+ also validates the integrity of the compressed data using the check
+ information at the end of the gzip or zlib stream */
+ totin = totout = last = 0;
+ index = NULL; /* will be allocated by first addpoint() */
+ strm.avail_out = 0;
+ do {
+ /* get some compressed data from input file */
+ strm.avail_in = fread(input, 1, CHUNK, in);
+ if (ferror(in)) {
+ ret = Z_ERRNO;
+ goto build_index_error;
+ }
+ if (strm.avail_in == 0) {
+ ret = Z_DATA_ERROR;
+ goto build_index_error;
+ }
+ strm.next_in = input;
+
+ /* process all of that, or until end of stream */
+ do {
+ /* reset sliding window if necessary */
+ if (strm.avail_out == 0) {
+ strm.avail_out = WINSIZE;
+ strm.next_out = window;
+ }
+
+ /* inflate until out of input, output, or at end of block --
+ update the total input and output counters */
+ totin += strm.avail_in;
+ totout += strm.avail_out;
+ ret = inflate(&strm, Z_BLOCK); /* return at end of block */
+ totin -= strm.avail_in;
+ totout -= strm.avail_out;
+ if (ret == Z_NEED_DICT)
+ ret = Z_DATA_ERROR;
+ if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
+ goto build_index_error;
+ if (ret == Z_STREAM_END)
+ break;
+
+ /* if at end of block, consider adding an index entry (note that if
+ data_type indicates an end-of-block, then all of the
+ uncompressed data from that block has been delivered, and none
+ of the compressed data after that block has been consumed,
+ except for up to seven bits) -- the totout == 0 provides an
+ entry point after the zlib or gzip header, and assures that the
+ index always has at least one access point; we avoid creating an
+ access point after the last block by checking bit 6 of data_type
+ */
+ if ((strm.data_type & 128) && !(strm.data_type & 64) &&
+ (totout == 0 || totout - last > span)) {
+ index = addpoint(index, strm.data_type & 7, totin,
+ totout, strm.avail_out, window);
+ if (index == NULL) {
+ ret = Z_MEM_ERROR;
+ goto build_index_error;
+ }
+ last = totout;
+ }
+ } while (strm.avail_in != 0);
+ } while (ret != Z_STREAM_END);
+
+ /* clean up and return index (release unused entries in list) */
+ (void)inflateEnd(&strm);
+ index = realloc(index, sizeof(struct point) * index->have);
+ index->size = index->have;
+ *built = index;
+ return index->size;
+
+ /* return error */
+ build_index_error:
+ (void)inflateEnd(&strm);
+ if (index != NULL)
+ free_index(index);
+ return ret;
+}
+
+/* Use the index to read len bytes from offset into buf, return bytes read or
+ negative for error (Z_DATA_ERROR or Z_MEM_ERROR). If data is requested past
+ the end of the uncompressed data, then extract() will return a value less
+ than len, indicating how much as actually read into buf. This function
+ should not return a data error unless the file was modified since the index
+ was generated. extract() may also return Z_ERRNO if there is an error on
+ reading or seeking the input file. */
+local int extract(FILE *in, struct access *index, off_t offset,
+ unsigned char *buf, int len)
+{
+ int ret, skip;
+ z_stream strm;
+ struct point *here;
+ unsigned char input[CHUNK];
+ unsigned char discard[WINSIZE];
+
+ /* proceed only if something reasonable to do */
+ if (len < 0)
+ return 0;
+
+ /* find where in stream to start */
+ here = index->list;
+ ret = index->have;
+ while (--ret && here[1].out <= offset)
+ here++;
+
+ /* initialize file and inflate state to start there */
+ strm.zalloc = Z_NULL;
+ strm.zfree = Z_NULL;
+ strm.opaque = Z_NULL;
+ strm.avail_in = 0;
+ strm.next_in = Z_NULL;
+ ret = inflateInit2(&strm, -15); /* raw inflate */
+ if (ret != Z_OK)
+ return ret;
+ ret = fseeko(in, here->in - (here->bits ? 1 : 0), SEEK_SET);
+ if (ret == -1)
+ goto extract_ret;
+ if (here->bits) {
+ ret = getc(in);
+ if (ret == -1) {
+ ret = ferror(in) ? Z_ERRNO : Z_DATA_ERROR;
+ goto extract_ret;
+ }
+ (void)inflatePrime(&strm, here->bits, ret >> (8 - here->bits));
+ }
+ (void)inflateSetDictionary(&strm, here->window, WINSIZE);
+
+ /* skip uncompressed bytes until offset reached, then satisfy request */
+ offset -= here->out;
+ strm.avail_in = 0;
+ skip = 1; /* while skipping to offset */
+ do {
+ /* define where to put uncompressed data, and how much */
+ if (offset == 0 && skip) { /* at offset now */
+ strm.avail_out = len;
+ strm.next_out = buf;
+ skip = 0; /* only do this once */
+ }
+ if (offset > WINSIZE) { /* skip WINSIZE bytes */
+ strm.avail_out = WINSIZE;
+ strm.next_out = discard;
+ offset -= WINSIZE;
+ }
+ else if (offset != 0) { /* last skip */
+ strm.avail_out = (unsigned)offset;
+ strm.next_out = discard;
+ offset = 0;
+ }
+
+ /* uncompress until avail_out filled, or end of stream */
+ do {
+ if (strm.avail_in == 0) {
+ strm.avail_in = fread(input, 1, CHUNK, in);
+ if (ferror(in)) {
+ ret = Z_ERRNO;
+ goto extract_ret;
+ }
+ if (strm.avail_in == 0) {
+ ret = Z_DATA_ERROR;
+ goto extract_ret;
+ }
+ strm.next_in = input;
+ }
+ ret = inflate(&strm, Z_NO_FLUSH); /* normal inflate */
+ if (ret == Z_NEED_DICT)
+ ret = Z_DATA_ERROR;
+ if (ret == Z_MEM_ERROR || ret == Z_DATA_ERROR)
+ goto extract_ret;
+ if (ret == Z_STREAM_END)
+ break;
+ } while (strm.avail_out != 0);
+
+ /* if reach end of stream, then don't keep trying to get more */
+ if (ret == Z_STREAM_END)
+ break;
+
+ /* do until offset reached and requested data read, or stream ends */
+ } while (skip);
+
+ /* compute number of uncompressed bytes read after offset */
+ ret = skip ? 0 : len - strm.avail_out;
+
+ /* clean up and return bytes read or error */
+ extract_ret:
+ (void)inflateEnd(&strm);
+ return ret;
+}
+
+/* Demonstrate the use of build_index() and extract() by processing the file
+ provided on the command line, and the extracting 16K from about 2/3rds of
+ the way through the uncompressed output, and writing that to stdout. */
+int main(int argc, char **argv)
+{
+ int len;
+ off_t offset;
+ FILE *in;
+ struct access *index;
+ unsigned char buf[CHUNK];
+
+ /* open input file */
+ if (argc != 2) {
+ fprintf(stderr, "usage: zran file.gz\n");
+ return 1;
+ }
+ in = fopen(argv[1], "rb");
+ if (in == NULL) {
+ fprintf(stderr, "zran: could not open %s for reading\n", argv[1]);
+ return 1;
+ }
+
+ /* build index */
+ len = build_index(in, SPAN, &index);
+ if (len < 0) {
+ fclose(in);
+ switch (len) {
+ case Z_MEM_ERROR:
+ fprintf(stderr, "zran: out of memory\n");
+ break;
+ case Z_DATA_ERROR:
+ fprintf(stderr, "zran: compressed data error in %s\n", argv[1]);
+ break;
+ case Z_ERRNO:
+ fprintf(stderr, "zran: read error on %s\n", argv[1]);
+ break;
+ default:
+ fprintf(stderr, "zran: error %d while building index\n", len);
+ }
+ return 1;
+ }
+ fprintf(stderr, "zran: built index with %d access points\n", len);
+
+ /* use index by reading some bytes from an arbitrary offset */
+ offset = (index->list[index->have - 1].out << 1) / 3;
+ len = extract(in, index, offset, buf, CHUNK);
+ if (len < 0)
+ fprintf(stderr, "zran: extraction failed: %s error\n",
+ len == Z_MEM_ERROR ? "out of memory" : "input corrupted");
+ else {
+ fwrite(buf, 1, len, stdout);
+ fprintf(stderr, "zran: extracted %d bytes at %llu\n", len, offset);
+ }
+
+ /* clean up and exit */
+ free_index(index);
+ fclose(in);
+ return 0;
+}
diff --git a/gzio.c b/gzio.c
index b069b7a..7e90f49 100644
--- a/gzio.c
+++ b/gzio.c
@@ -489,6 +489,9 @@
}
s->crc = crc32(s->crc, start, (uInt)(s->stream.next_out - start));
+ if (len == s->stream.avail_out &&
+ (s->z_err == Z_DATA_ERROR || s->z_err == Z_ERRNO))
+ return -1;
return (int)(len - s->stream.avail_out);
}
@@ -975,9 +978,9 @@
#endif
/* ===========================================================================
- Returns the error message for the last error which occured on the
+ Returns the error message for the last error which occurred on the
given compressed file. errnum is set to zlib error number. If an
- error occured in the file system and not in the compression library,
+ error occurred in the file system and not in the compression library,
errnum is set to Z_ERRNO and the application may consult errno
to get the exact error code.
*/
diff --git a/infback.c b/infback.c
index c78d273..455dbc9 100644
--- a/infback.c
+++ b/infback.c
@@ -1,5 +1,5 @@
/* infback.c -- inflate using a call-back interface
- * Copyright (C) 1995-2004 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -50,7 +50,7 @@
sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
- strm->state = (voidpf)state;
+ strm->state = (struct internal_state FAR *)state;
state->dmax = 32768U;
state->wbits = windowBits;
state->wsize = 1U << windowBits;
diff --git a/inflate.c b/inflate.c
index 7dccc9d..792fdee 100644
--- a/inflate.c
+++ b/inflate.c
@@ -117,6 +117,7 @@
state->head = Z_NULL;
state->wsize = 0;
state->whave = 0;
+ state->write = 0;
state->hold = 0;
state->bits = 0;
state->lencode = state->distcode = state->next = state->codes;
@@ -124,6 +125,22 @@
return Z_OK;
}
+int ZEXPORT inflatePrime(strm, bits, value)
+z_streamp strm;
+int bits;
+int value;
+{
+ struct inflate_state FAR *state;
+
+ if (strm == Z_NULL || strm->state == Z_NULL) return Z_STREAM_ERROR;
+ state = (struct inflate_state FAR *)strm->state;
+ if (bits > 16 || state->bits + bits > 32) return Z_STREAM_ERROR;
+ value &= (1L << bits) - 1;
+ state->hold += value << state->bits;
+ state->bits += bits;
+ return Z_OK;
+}
+
int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
z_streamp strm;
int windowBits;
@@ -146,7 +163,7 @@
ZALLOC(strm, 1, sizeof(struct inflate_state));
if (state == Z_NULL) return Z_MEM_ERROR;
Tracev((stderr, "inflate: allocated\n"));
- strm->state = (voidpf)state;
+ strm->state = (struct internal_state FAR *)state;
if (windowBits < 0) {
state->wrap = 0;
windowBits = -windowBits;
@@ -1310,6 +1327,7 @@
struct inflate_state FAR *state;
struct inflate_state FAR *copy;
unsigned char FAR *window;
+ unsigned wsize;
/* check input */
if (dest == Z_NULL || source == Z_NULL || source->state == Z_NULL ||
@@ -1335,15 +1353,16 @@
zmemcpy(dest, source, sizeof(z_stream));
zmemcpy(copy, state, sizeof(struct inflate_state));
if (state->lencode >= state->codes &&
- state->lencode <= state->codes + ENOUGH - 1)
- {
+ state->lencode <= state->codes + ENOUGH - 1) {
copy->lencode = copy->codes + (state->lencode - state->codes);
copy->distcode = copy->codes + (state->distcode - state->codes);
}
copy->next = copy->codes + (state->next - state->codes);
- if (window != Z_NULL)
- zmemcpy(window, state->window, (uInt)(1U << state->wbits));
+ if (window != Z_NULL) {
+ wsize = 1U << state->wbits;
+ zmemcpy(window, state->window, wsize);
+ }
copy->window = window;
- dest->state = (voidpf)copy;
+ dest->state = (struct internal_state FAR *)copy;
return Z_OK;
}
diff --git a/inftrees.c b/inftrees.c
index 471f735..61d52f6 100644
--- a/inftrees.c
+++ b/inftrees.c
@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
- " inflate 1.2.2.3 Copyright 1995-2005 Mark Adler ";
+ " inflate 1.2.2.4 Copyright 1995-2005 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
- 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 66, 71};
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 206, 69};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
@@ -134,7 +134,7 @@
left -= count[len];
if (left < 0) return -1; /* over-subscribed */
}
- if (left > 0 && (type == CODES || (codes - count[0] != 1)))
+ if (left > 0 && (type == CODES || max != 1))
return -1; /* incomplete set */
/* generate offsets into symbol table for each length for sorting */
@@ -232,6 +232,7 @@
/* replicate for those indices with low len bits equal to huff */
incr = 1U << (len - drop);
fill = 1U << curr;
+ min = fill; /* save offset to next table */
do {
fill -= incr;
next[(huff >> drop) + fill] = this;
@@ -262,7 +263,7 @@
drop = root;
/* increment past last table */
- next += (unsigned)(1U << curr);
+ next += min; /* here min is 1 << curr */
/* determine length of next table */
curr = len - drop;
diff --git a/inftrees.h b/inftrees.h
index 82d365a..b1104c8 100644
--- a/inftrees.h
+++ b/inftrees.h
@@ -1,5 +1,5 @@
/* inftrees.h -- header to use inftrees.c
- * Copyright (C) 1995-2003 Mark Adler
+ * Copyright (C) 1995-2005 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -36,12 +36,12 @@
*/
/* Maximum size of dynamic tree. The maximum found in a long but non-
- exhaustive search was 1004 code structures (850 for length/literals
- and 154 for distances, the latter actually the result of an
+ exhaustive search was 1444 code structures (852 for length/literals
+ and 592 for distances, the latter actually the result of an
exhaustive search). The true maximum is not known, but the value
below is more than safe. */
-#define ENOUGH 1440
-#define MAXD 154
+#define ENOUGH 2048
+#define MAXD 592
/* Type of code to build for inftable() */
typedef enum {
diff --git a/make_vms.com b/make_vms.com
index e6587cd..c3e5b58 100644
--- a/make_vms.com
+++ b/make_vms.com
@@ -1,30 +1,69 @@
-$! make libz under VMS
-$! written by Martin P.J. Zinser <m.zinser@gsi.de>
+$! make libz under VMS written by
+$! Martin P.J. Zinser
+$! <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
+$!
+$ on error then goto err_exit
+$!
+$!
+$! Just some general constants...
+$!
+$ true = 1
+$ false = 0
+$ tmpnam = "temp_" + f$getjpi("","pid")
+$ SAY = "WRITE SYS$OUTPUT"
+$!
+$! Setup variables holding "config" information
+$!
+$ Make = ""
+$ name = "Zlib"
+$ version = "?.?.?"
+$ v_string = "ZLIB_VERSION"
+$ v_file = "zlib.h"
+$ ccopt = ""
+$ lopts = ""
+$ linkonly = false
+$ optfile = name + ".opt"
+$ its_decc = false
+$ its_vaxc = false
+$ its_gnuc = false
+$ axp = f$getsyi("HW_MODEL").ge.1024
+$ s_case = false
+$! Check for MMK/MMS
+$!
+$ If F$Search ("Sys$System:MMS.EXE") .nes. "" Then Make = "MMS"
+$ If F$Type (MMK) .eqs. "STRING" Then Make = "MMK"
+$!
+$!
+$ gosub find_version
+$!
+$ gosub check_opts
$!
$! Look for the compiler used
$!
-$ ccopt = ""
-$ if f$getsyi("HW_MODEL").ge.1024
+$ gosub check_compiler
+$ if its_decc
$ then
-$ ccopt = "/prefix=all"+ccopt
-$ comp = "__decc__=1"
-$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ else
-$ if f$search("SYS$SYSTEM:DECC$COMPILER.EXE").eqs.""
+$ ccopt = "/prefix=all" + ccopt
+$ if f$trnlnm("SYS") .eqs. ""
$ then
-$ comp = "__vaxc__=1"
-$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
-$ else
-$ if f$trnlnm("SYS").eqs."" then define sys decc$library_include:
-$ ccopt = "/decc/prefix=all"+ccopt
-$ comp = "__decc__=1"
-$ endif
+$ if axp
+$ then
+$ define sys sys$library:
+$ else
+$ ccopt = "/decc" + ccopt
+$ define sys decc$library_include:
+$ endif
+$ endif
$ endif
+$ if its_vaxc .or. its_gnuc
+$ then
+$ if f$trnlnm("SYS").eqs."" then define sys sys$library:
+$ endif
$!
$! Build the thing plain or with mms
$!
$ write sys$output "Compiling Zlib sources ..."
-$ if f$search("SYS$SYSTEM:MMS.EXE").eqs.""
+$ if make.eqs.""
$ then
$ dele example.obj;*,minigzip.obj;*
$ CALL MAKE adler32.OBJ "CC ''CCOPT' adler32" -
@@ -32,24 +71,21 @@
$ CALL MAKE compress.OBJ "CC ''CCOPT' compress" -
compress.c zlib.h zconf.h
$ CALL MAKE crc32.OBJ "CC ''CCOPT' crc32" -
- crc32.c crc32.h zlib.h zconf.h zutil.h
+ crc32.c zlib.h zconf.h
$ CALL MAKE deflate.OBJ "CC ''CCOPT' deflate" -
deflate.c deflate.h zutil.h zlib.h zconf.h
-$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio /define=""NO_vsnprintf""" -
+$ CALL MAKE gzio.OBJ "CC ''CCOPT' gzio" -
gzio.c zutil.h zlib.h zconf.h
$ CALL MAKE infback.OBJ "CC ''CCOPT' infback" -
- infback.c zutil.h zlib.h zconf.h -
- "inftrees.h inflate.h inffast.h inffixed.h"
+ infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
$ CALL MAKE inffast.OBJ "CC ''CCOPT' inffast" -
- inffast.c zutil.h zlib.h zconf.h -
- "inftrees.h inflate.h inffast.h"
+ inffast.c zutil.h zlib.h zconf.h inffast.h
$ CALL MAKE inflate.OBJ "CC ''CCOPT' inflate" -
- inflate.c zutil.h zlib.h zconf.h -
- "inftrees.h inflate.h inffast.h inffixed.h"
+ inflate.c zutil.h zlib.h zconf.h infblock.h
$ CALL MAKE inftrees.OBJ "CC ''CCOPT' inftrees" -
inftrees.c zutil.h zlib.h zconf.h inftrees.h
$ CALL MAKE trees.OBJ "CC ''CCOPT' trees" -
- trees.c trees.h deflate.h zutil.h zlib.h zconf.h
+ trees.c deflate.h zutil.h zlib.h zconf.h
$ CALL MAKE uncompr.OBJ "CC ''CCOPT' uncompr" -
uncompr.c zlib.h zconf.h
$ CALL MAKE zutil.OBJ "CC ''CCOPT' zutil" -
@@ -60,17 +96,45 @@
$ CALL MAKE example.OBJ "CC ''CCOPT' example" -
example.c zlib.h zconf.h
$ call make example.exe "LINK example,libz.olb/lib" example.obj libz.olb
-$ write sys$output "Building minigzip..."
-$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
+$ if f$search("x11vms:xvmsutils.olb") .nes. ""
+$ then
+$ write sys$output "Building minigzip..."
+$ CALL MAKE minigzip.OBJ "CC ''CCOPT' minigzip" -
minigzip.c zlib.h zconf.h
-$ call make minigzip.exe -
- "LINK minigzip,libz.olb/lib" -
+$ call make minigzip.exe -
+ "LINK minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib" -
minigzip.obj libz.olb
+$ endif
$ else
-$ mms/macro=('comp')
+$ gosub crea_mms
+$ SAY "Make ''name' ''version' with ''Make' "
+$ 'make'
$ endif
+$!
+$! Alpha gets a shareable image
+$!
+$ If axp
+$ Then
+$ gosub crea_olist
+$ write sys$output "Creating libzshr.exe"
+$ call anal_obj_axp modules.opt _link.opt
+$ if s_case
+$ then
+$ open/append optf modules.opt
+$ write optf "case_sensitive=YES"
+$ close optf
+$ endif
+$ LINK_'lopts'/SHARE=libzshr.exe modules.opt/opt,_link.opt/opt
+$ endif
$ write sys$output "Zlib build completed"
$ exit
+$CC_ERR:
+$ write sys$output "C compiler required to build ''name'"
+$ goto err_exit
+$ERR_EXIT:
+$ set message/facil/ident/sever/text
+$ write sys$output "Exiting..."
+$ exit 2
$!
$!
$MAKE: SUBROUTINE !SUBROUTINE TO CHECK DEPENDENCIES
@@ -112,3 +176,286 @@
$Exit:
$ If V Then Set Verify
$ENDSUBROUTINE
+$!------------------------------------------------------------------------------
+$!
+$! Check command line options and set symbols accordingly
+$!
+$ CHECK_OPTS:
+$ i = 1
+$ OPT_LOOP:
+$ if i .lt. 9
+$ then
+$ cparm = f$edit(p'i',"upcase")
+$ if cparm .eqs. "DEBUG"
+$ then
+$ ccopt = ccopt + "/noopt/deb"
+$ lopts = lopts + "/deb"
+$ endif
+$ if f$locate("CCOPT=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ ccopt = ccopt + f$extract(start,len,cparm)
+$ if f$locate("AS_IS",f$edit(ccopt,"UPCASE")) .lt. f$length(ccopt) -
+ then s_case = true
+$ endif
+$ if cparm .eqs. "LINK" then linkonly = true
+$ if f$locate("LOPTS=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ lopts = lopts + f$extract(start,len,cparm)
+$ endif
+$ if f$locate("CC=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ cc_com = f$extract(start,len,cparm)
+ if (cc_com .nes. "DECC") .and. -
+ (cc_com .nes. "VAXC") .and. -
+ (cc_com .nes. "GNUC")
+$ then
+$ write sys$output "Unsupported compiler choice ''cc_com' ignored"
+$ write sys$output "Use DECC, VAXC, or GNUC instead"
+$ else
+$ if cc_com .eqs. "DECC" then its_decc = true
+$ if cc_com .eqs. "VAXC" then its_vaxc = true
+$ if cc_com .eqs. "GNUC" then its_gnuc = true
+$ endif
+$ endif
+$ if f$locate("MAKE=",cparm) .lt. f$length(cparm)
+$ then
+$ start = f$locate("=",cparm) + 1
+$ len = f$length(cparm) - start
+$ mmks = f$extract(start,len,cparm)
+$ if (mmks .eqs. "MMK") .or. (mmks .eqs. "MMS")
+$ then
+$ make = mmks
+$ else
+$ write sys$output "Unsupported make choice ''mmks' ignored"
+$ write sys$output "Use MMK or MMS instead"
+$ endif
+$ endif
+$ i = i + 1
+$ goto opt_loop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Look for the compiler used
+$!
+$CHECK_COMPILER:
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then
+$ its_decc = (f$search("SYS$SYSTEM:DECC$COMPILER.EXE") .nes. "")
+$ its_vaxc = .not. its_decc .and. (F$Search("SYS$System:VAXC.Exe") .nes. "")
+$ its_gnuc = .not. (its_decc .or. its_vaxc) .and. (f$trnlnm("gnu_cc") .nes. "")
+$ endif
+$!
+$! Exit if no compiler available
+$!
+$ if (.not. (its_decc .or. its_vaxc .or. its_gnuc))
+$ then goto CC_ERR
+$ else
+$ if its_decc then write sys$output "CC compiler check ... Compaq C"
+$ if its_vaxc then write sys$output "CC compiler check ... VAX C"
+$ if its_gnuc then write sys$output "CC compiler check ... GNU C"
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! If MMS/MMK are available dump out the descrip.mms if required
+$!
+$CREA_MMS:
+$ write sys$output "Creating descrip.mms..."
+$ create descrip.mms
+$ open/append out descrip.mms
+$ copy sys$input: out
+$ deck
+# descrip.mms: MMS description file for building zlib on VMS
+# written by Martin P.J. Zinser
+# <zinser@zinser.no-ip.info or zinser@sysdev.deutsche-boerse.com>
+
+OBJS = adler32.obj, compress.obj, crc32.obj, gzio.obj, uncompr.obj, infback.obj\
+ deflate.obj, trees.obj, zutil.obj, inflate.obj, \
+ inftrees.obj, inffast.obj
+
+$ eod
+$ write out "CFLAGS=", ccopt
+$ write out "LOPTS=", lopts
+$ copy sys$input: out
+$ deck
+
+all : example.exe minigzip.exe libz.olb
+ @ write sys$output " Example applications available"
+
+libz.olb : libz.olb($(OBJS))
+ @ write sys$output " libz available"
+
+example.exe : example.obj libz.olb
+ link $(LOPTS) example,libz.olb/lib
+
+minigzip.exe : minigzip.obj libz.olb
+ link $(LOPTS) minigzip,libz.olb/lib,x11vms:xvmsutils.olb/lib
+
+clean :
+ delete *.obj;*,libz.olb;*,*.opt;*,*.exe;*
+
+
+# Other dependencies.
+adler32.obj : adler32.c zutil.h zlib.h zconf.h
+compress.obj : compress.c zlib.h zconf.h
+crc32.obj : crc32.c zutil.h zlib.h zconf.h
+deflate.obj : deflate.c deflate.h zutil.h zlib.h zconf.h
+example.obj : example.c zlib.h zconf.h
+gzio.obj : gzio.c zutil.h zlib.h zconf.h
+inffast.obj : inffast.c zutil.h zlib.h zconf.h inftrees.h inffast.h
+inflate.obj : inflate.c zutil.h zlib.h zconf.h
+inftrees.obj : inftrees.c zutil.h zlib.h zconf.h inftrees.h
+minigzip.obj : minigzip.c zlib.h zconf.h
+trees.obj : trees.c deflate.h zutil.h zlib.h zconf.h
+uncompr.obj : uncompr.c zlib.h zconf.h
+zutil.obj : zutil.c zutil.h zlib.h zconf.h
+infback.obj : infback.c zutil.h inftrees.h inflate.h inffast.h inffixed.h
+$ eod
+$ close out
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Read list of core library sources from makefile.in and create options
+$! needed to build shareable image
+$!
+$CREA_OLIST:
+$ open/read min makefile.in
+$ open/write mod modules.opt
+$ src_check = "OBJS ="
+$MRLOOP:
+$ read/end=mrdone min rec
+$ if (f$extract(0,6,rec) .nes. src_check) then goto mrloop
+$ rec = rec - src_check
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .eqs. "\") then goto mrdone
+$MRSLOOP:
+$ read/end=mrdone min rec
+$ gosub extra_filnam
+$ if (f$element(1,"\",rec) .nes. "\") then goto mrsloop
+$MRDONE:
+$ close min
+$ close mod
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Take record extracted in crea_olist and split it into single filenames
+$!
+$EXTRA_FILNAM:
+$ myrec = f$edit(rec - "\", "trim,compress")
+$ i = 0
+$FELOOP:
+$ srcfil = f$element(i," ", myrec)
+$ if (srcfil .nes. " ")
+$ then
+$ write mod f$parse(srcfil,,,"NAME"), ".obj"
+$ i = i + 1
+$ goto feloop
+$ endif
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Find current Zlib version number
+$!
+$FIND_VERSION:
+$ open/read h_in 'v_file'
+$hloop:
+$ read/end=hdone h_in rec
+$ rec = f$edit(rec,"TRIM")
+$ if (f$extract(0,1,rec) .nes. "#") then goto hloop
+$ rec = f$edit(rec - "#", "TRIM")
+$ if f$element(0," ",rec) .nes. "define" then goto hloop
+$ if f$element(1," ",rec) .eqs. v_string
+$ then
+$ version = 'f$element(2," ",rec)'
+$ goto hdone
+$ endif
+$ goto hloop
+$hdone:
+$ close h_in
+$ return
+$!------------------------------------------------------------------------------
+$!
+$! Analyze Object files for OpenVMS AXP to extract Procedure and Data
+$! information to build a symbol vector for a shareable image
+$! All the "brains" of this logic was suggested by Hartmut Becker
+$! (Hartmut.Becker@compaq.com). All the bugs were introduced by me
+$! (zinser@decus.de), so if you do have problem reports please do not
+$! bother Hartmut/HP, but get in touch with me
+$!
+$ ANAL_OBJ_AXP: Subroutine
+$ V = 'F$Verify(0)
+$ SAY := "WRITE_ SYS$OUTPUT"
+$
+$ IF F$SEARCH("''P1'") .EQS. ""
+$ THEN
+$ SAY "ANAL_OBJ_AXP-E-NOSUCHFILE: Error, inputfile ''p1' not available"
+$ goto exit_aa
+$ ENDIF
+$ IF "''P2'" .EQS. ""
+$ THEN
+$ SAY "ANAL_OBJ_AXP: Error, no output file provided"
+$ goto exit_aa
+$ ENDIF
+$
+$ open/read in 'p1
+$ create a.tmp
+$ open/append atmp a.tmp
+$ loop:
+$ read/end=end_loop in line
+$ f= f$search(line)
+$ if f .eqs. ""
+$ then
+$ write sys$output "ANAL_OBJ_AXP-w-nosuchfile, ''line'"
+$ goto loop
+$ endif
+$ define/user sys$output nl:
+$ define/user sys$error nl:
+$ anal/obj/gsd 'f /out=x.tmp
+$ open/read xtmp x.tmp
+$ XLOOP:
+$ read/end=end_xloop xtmp xline
+$ xline = f$edit(xline,"compress")
+$ write atmp xline
+$ goto xloop
+$ END_XLOOP:
+$ close xtmp
+$ goto loop
+$ end_loop:
+$ close in
+$ close atmp
+$ if f$search("a.tmp") .eqs. "" -
+ then $ exit
+$ ! all global definitions
+$ search a.tmp "symbol:","EGSY$V_DEF 1","EGSY$V_NORM 1"/out=b.tmp
+$ ! all procedures
+$ search b.tmp "EGSY$V_NORM 1"/wind=(0,1) /out=c.tmp
+$ search c.tmp "symbol:"/out=d.tmp
+$ define/user sys$output nl:
+$ edito/edt/command=sys$input d.tmp
+sub/symbol: "/symbol_vector=(/whole
+sub/"/=PROCEDURE)/whole
+exit
+$ ! all data
+$ search b.tmp "EGSY$V_DEF 1"/wind=(0,1) /out=e.tmp
+$ search e.tmp "symbol:"/out=f.tmp
+$ define/user sys$output nl:
+$ edito/edt/command=sys$input f.tmp
+sub/symbol: "/symbol_vector=(/whole
+sub/"/=DATA)/whole
+exit
+$ sort/nodupl d.tmp,f.tmp 'p2'
+$ delete a.tmp;*,b.tmp;*,c.tmp;*,d.tmp;*,e.tmp;*,f.tmp;*
+$ if f$search("x.tmp") .nes. "" -
+ then $ delete x.tmp;*
+$!
+$ EXIT_AA:
+$ if V then set verify
+$ endsubroutine
+$!------------------------------------------------------------------------------
diff --git a/qnx/package.qpg b/qnx/package.qpg
index b08778d..f728ebe 100644
--- a/qnx/package.qpg
+++ b/qnx/package.qpg
@@ -25,10 +25,10 @@
<QPG:Files>
<QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
<QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
- <QPG:Add file="../libz.so.1.2.2.3" install="/opt/lib/" user="root:bin" permission="644"/>
- <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.2.3"/>
- <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.2.3"/>
- <QPG:Add file="../libz.so.1.2.2.3" install="/opt/lib/" component="slib"/>
+ <QPG:Add file="../libz.so.1.2.2.4" install="/opt/lib/" user="root:bin" permission="644"/>
+ <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.2.4"/>
+ <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.2.4"/>
+ <QPG:Add file="../libz.so.1.2.2.4" install="/opt/lib/" component="slib"/>
</QPG:Files>
<QPG:PackageFilter>
@@ -63,7 +63,7 @@
</QPM:ProductDescription>
<QPM:ReleaseDescription>
- <QPM:ReleaseVersion>1.2.2.3</QPM:ReleaseVersion>
+ <QPM:ReleaseVersion>1.2.2.4</QPM:ReleaseVersion>
<QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
<QPM:ReleaseStability>Stable</QPM:ReleaseStability>
<QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
diff --git a/trees.c b/trees.c
index 48c651b..395e4e1 100644
--- a/trees.c
+++ b/trees.c
@@ -1,5 +1,5 @@
/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2004 Jean-loup Gailly
+ * Copyright (C) 1995-2005 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -555,7 +555,7 @@
while (n != 0) {
m = s->heap[--h];
if (m > max_code) continue;
- if (tree[m].Len != (unsigned) bits) {
+ if ((unsigned) tree[m].Len != (unsigned) bits) {
Trace((stderr,"code %d bits %d->%d\n", m, tree[m].Len, bits));
s->opt_len += ((long)bits - (long)tree[m].Len)
*(long)tree[m].Freq;
diff --git a/win32/zlib1.rc b/win32/zlib1.rc
index e49a81c..8cff589 100644
--- a/win32/zlib1.rc
+++ b/win32/zlib1.rc
@@ -5,8 +5,8 @@
#else
VS_VERSION_INFO VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
#endif
- FILEVERSION 1,2,2,3
- PRODUCTVERSION 1,2,2,3
+ FILEVERSION 1,2,2,4
+ PRODUCTVERSION 1,2,2,4
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
#ifdef _DEBUG
FILEFLAGS 1
@@ -23,12 +23,12 @@
//language ID = U.S. English, char set = Windows, Multilingual
BEGIN
VALUE "FileDescription", "zlib data compression library\0"
- VALUE "FileVersion", "1.2.2.3\0"
+ VALUE "FileVersion", "1.2.2.4\0"
VALUE "InternalName", "zlib1.dll\0"
VALUE "LegalCopyright", "(C) 1995-2004 Jean-loup Gailly & Mark Adler\0"
VALUE "OriginalFilename", "zlib1.dll\0"
VALUE "ProductName", "zlib\0"
- VALUE "ProductVersion", "1.2.2.3\0"
+ VALUE "ProductVersion", "1.2.2.4\0"
VALUE "Comments","DLL support by Alessandro Iacopetti & Gilles Vollant\0"
END
END
diff --git a/zlib.3 b/zlib.3
index 41e5fed..b91375e 100644
--- a/zlib.3
+++ b/zlib.3
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "27 May 2005"
+.TH ZLIB 3 "11 July 2005"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
@@ -133,8 +133,8 @@
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS
-Version 1.2.2.3
-Copyright (C) 1995-2004 Jean-loup Gailly (jloup@gzip.org)
+Version 1.2.2.4
+Copyright (C) 1995-2005 Jean-loup Gailly (jloup@gzip.org)
and Mark Adler (madler@alumni.caltech.edu).
.LP
This software is provided "as-is,"
diff --git a/zlib.h b/zlib.h
index 9bb6931..f7e47a2 100644
--- a/zlib.h
+++ b/zlib.h
@@ -1,5 +1,5 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.2.3, May 27th, 2005
+ version 1.2.2.4, July 11th, 2005
Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
@@ -37,8 +37,8 @@
extern "C" {
#endif
-#define ZLIB_VERSION "1.2.2.3"
-#define ZLIB_VERNUM 0x1223
+#define ZLIB_VERSION "1.2.2.4"
+#define ZLIB_VERNUM 0x1224
/*
The 'zlib' compression library provides in-memory compression and
@@ -726,11 +726,11 @@
a crc32 instead of an adler32.
inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was not enough
- memory, Z_STREAM_ERROR if a parameter is invalid (such as a negative
- memLevel). msg is set to null if there is no error message. inflateInit2
- does not perform any decompression apart from reading the zlib header if
- present: this will be done by inflate(). (So next_in and avail_in may be
- modified, but next_out and avail_out are unchanged.)
+ memory, Z_STREAM_ERROR if a parameter is invalid (such as a null strm). msg
+ is set to null if there is no error message. inflateInit2 does not perform
+ any decompression apart from reading the zlib header if present: this will
+ be done by inflate(). (So next_in and avail_in may be modified, but next_out
+ and avail_out are unchanged.)
*/
ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
@@ -796,6 +796,22 @@
stream state was inconsistent (such as zalloc or state being NULL).
*/
+ZEXTERN int ZEXPORT inflatePrime OF((z_streamp strm,
+ int bits,
+ int value));
+/*
+ This function inserts bits in the inflate input stream. The intent is
+ that this function is used to start inflating at a bit position in the
+ middle of a byte. The provided bits will be used before any bytes are used
+ from next_in. This function should only be used with raw inflate, and
+ should be used before the first inflate() call after inflateInit2() or
+ inflateReset(). bits must be less than or equal to 16, and that many of the
+ least significant bits of value will be inserted in the input.
+
+ inflatePrime returns Z_OK if success, or Z_STREAM_ERROR if the source
+ stream state was inconsistent.
+*/
+
ZEXTERN int ZEXPORT inflateGetHeader OF((z_streamp strm,
gz_headerp head));
/*
diff --git a/zutil.c b/zutil.c
index 868d42f..d55f594 100644
--- a/zutil.c
+++ b/zutil.c
@@ -1,5 +1,5 @@
/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2004 Jean-loup Gailly.
+ * Copyright (C) 1995-2005 Jean-loup Gailly.
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -74,38 +74,38 @@
flags += 1 << 13;
#endif
#ifdef NO_GZCOMPRESS
- flags += 1 << 16;
+ flags += 1L << 16;
#endif
#ifdef NO_GZIP
- flags += 1 << 17;
+ flags += 1L << 17;
#endif
#ifdef PKZIP_BUG_WORKAROUND
- flags += 1 << 20;
+ flags += 1L << 20;
#endif
#ifdef FASTEST
- flags += 1 << 21;
+ flags += 1L << 21;
#endif
#ifdef STDC
# ifdef NO_vsnprintf
- flags += 1 << 25;
+ flags += 1L << 25;
# ifdef HAS_vsprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# else
# ifdef HAS_vsnprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# endif
#else
- flags += 1 << 24;
+ flags += 1L << 24;
# ifdef NO_snprintf
- flags += 1 << 25;
+ flags += 1L << 25;
# ifdef HAS_sprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# else
# ifdef HAS_snprintf_void
- flags += 1 << 26;
+ flags += 1L << 26;
# endif
# endif
#endif
diff --git a/zutil.h b/zutil.h
index c800fab..b7d5eff 100644
--- a/zutil.h
+++ b/zutil.h
@@ -117,6 +117,9 @@
#ifdef OS2
# define OS_CODE 0x06
+# ifdef M_I86
+ #include <malloc.h>
+# endif
#endif
#if defined(MACOS) || defined(TARGET_OS_MAC)
