| ; Test MIR printer and parser for type id field in call site info. Test that |
| ; it works well with/without --emit-call-site-info. |
| |
| ; Multiplex --call-graph-section and -emit-call-site-info as both utilize |
| ; CallSiteInfo and callSites. |
| |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| ;; Test printer and parser with --call-graph-section only. |
| |
| ; Test printer. |
| ; Verify that fwdArgRegs is not set, typeId is set. |
| ; Verify the exact typeId value to ensure it is not garbage but the value |
| ; computed as the type id from the type operand bundle. |
| ; RUN: llc --call-graph-section %s -stop-before=finalize-isel -o %t1.mir |
| ; RUN: cat %t1.mir | FileCheck %s --check-prefix=PRINTER_CGS |
| ; PRINTER_CGS: name: main |
| ; PRINTER_CGS: callSites: |
| ; PRINTER_CGS-NEXT: - { bb: {{.*}}, offset: {{.*}}, fwdArgRegs: [], typeId: |
| ; PRINTER_CGS-NEXT: 7854600665770582568 } |
| |
| |
| ; Test parser. |
| ; Verify that we get the same result. |
| ; RUN: llc --call-graph-section %t1.mir -run-pass=finalize-isel -o - \ |
| ; RUN: | FileCheck %s --check-prefix=PARSER_CGS |
| ; PARSER_CGS: name: main |
| ; PARSER_CGS: callSites: |
| ; PARSER_CGS-NEXT: - { bb: {{.*}}, offset: {{.*}}, fwdArgRegs: [], typeId: |
| ; PARSER_CGS-NEXT: 7854600665770582568 } |
| |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| ;; Test printer and parser with -emit-call-site-info only. |
| |
| ; Test printer. |
| ; Verify that fwdArgRegs is set, typeId is not set. |
| ; RUN: llc -emit-call-site-info %s -stop-before=finalize-isel -o %t2.mir |
| ; RUN: cat %t2.mir | FileCheck %s --check-prefix=PRINTER_CSI |
| ; PRINTER_CSI: name: main |
| ; PRINTER_CSI: callSites: |
| ; PRINTER_CSI-NEXT: - { bb: {{.*}}, offset: {{.*}}, fwdArgRegs: |
| ; PRINTER_CSI-NEXT: { arg: 0, reg: '$edi' } |
| ; PRINTER_CSI-NOT: typeId: |
| |
| |
| ; Test parser. |
| ; Verify that we get the same result. |
| ; RUN: llc -emit-call-site-info %t2.mir -run-pass=finalize-isel -o - \ |
| ; RUN: | FileCheck %s --check-prefix=PARSER_CSI |
| ; PARSER_CSI: name: main |
| ; PARSER_CSI: callSites: |
| ; PARSER_CSI-NEXT: - { bb: {{.*}}, offset: {{.*}}, fwdArgRegs: |
| ; PARSER_CSI-NEXT: { arg: 0, reg: '$edi' } |
| ; PARSER_CSI-NOT: typeId: |
| |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| ;; Test printer and parser with both -emit-call-site-info and --call-graph-section. |
| |
| ; Test printer. |
| ; Verify both fwdArgRegs and typeId are set. |
| ; Verify the exact typeId value to ensure it is not garbage but the value |
| ; computed as the type id from the type operand bundle. |
| ; RUN: llc --call-graph-section -emit-call-site-info %s -stop-before=finalize-isel -o %t2.mir |
| ; RUN: cat %t2.mir | FileCheck %s --check-prefix=PRINTER_CGS_CSI |
| ; PRINTER_CGS_CSI: name: main |
| ; PRINTER_CGS_CSI: callSites: |
| ; PRINTER_CGS_CSI-NEXT: - { bb: {{.*}}, offset: {{.*}}, fwdArgRegs: |
| ; PRINTER_CGS_CSI-NEXT: { arg: 0, reg: '$edi' }, typeId: |
| ; PRINTER_CGS_CSI-NEXT: 7854600665770582568 } |
| |
| |
| ; Test parser. |
| ; Verify that we get the same result. |
| ; RUN: llc --call-graph-section -emit-call-site-info %t2.mir -run-pass=finalize-isel -o - \ |
| ; RUN: | FileCheck %s --check-prefix=PARSER_CGS_CSI |
| ; PARSER_CGS_CSI: name: main |
| ; PARSER_CGS_CSI: callSites: |
| ; PARSER_CGS_CSI-NEXT: - { bb: {{.*}}, offset: {{.*}}, fwdArgRegs: |
| ; PARSER_CGS_CSI-NEXT: { arg: 0, reg: '$edi' }, typeId: |
| ; PARSER_CGS_CSI-NEXT: 7854600665770582568 } |
| |
| ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; |
| |
| ; ModuleID = 'test.c' |
| source_filename = "test.c" |
| target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128" |
| target triple = "x86_64-unknown-linux-gnu" |
| |
| ; Function Attrs: noinline nounwind optnone uwtable |
| define dso_local void @foo(i8 signext %a) !type !3 { |
| entry: |
| ret void |
| } |
| |
| ; Function Attrs: noinline nounwind optnone uwtable |
| define dso_local i32 @main() !type !4 { |
| entry: |
| %retval = alloca i32, align 4 |
| %fp = alloca void (i8)*, align 8 |
| store i32 0, i32* %retval, align 4 |
| store void (i8)* @foo, void (i8)** %fp, align 8 |
| %0 = load void (i8)*, void (i8)** %fp, align 8 |
| call void %0(i8 signext 97) [ "type"(metadata !"_ZTSFvcE.generalized") ] |
| ret i32 0 |
| } |
| |
| !llvm.module.flags = !{!0, !1, !2} |
| |
| !0 = !{i32 1, !"wchar_size", i32 4} |
| !1 = !{i32 7, !"uwtable", i32 1} |
| !2 = !{i32 7, !"frame-pointer", i32 2} |
| !3 = !{i64 0, !"_ZTSFvcE.generalized"} |
| !4 = !{i64 0, !"_ZTSFiE.generalized"} |