| # Configuration information for video process test case. | |
| # This application will firstly load yuv frames to one type of surface(NV12/YV12/I420) | |
| # you require. After video processing, the processed content (NV12/YV12/I420 surface) | |
| # will be stored to frames(yv12 format in file). | |
| # Supported features include: denoise, deinterlacing, sharpening, color balance, skintone | |
| # detection/enhancement, blending and implicit format conversion(NV12<->YV12<->I420). Each | |
| # time only one kind of processing will be executed in test application. Although libva supports | |
| # multiple filters execution in one time. you can modify this configuration file to set the | |
| # filter and the corresponding parameters. | |
| #1.Source YUV(RGB) file information | |
| #SRC_FILE_NAME: /root/clips/YUV/bus_cif.yv12 | |
| SRC_FILE_NAME: ./bsw_src_1280x1024.yuy2.yuv | |
| SRC_FRAME_WIDTH: 1280 | |
| SRC_FRAME_HEIGHT: 1024 | |
| SRC_FRAME_FORMAT: YUYV | |
| #Note .yv12 files are in YV12 format and .yuv used above for STDE is in I420 format | |
| SRC_FILE_FORMAT: YUYV | |
| #2.Destination YUV(RGB) file information | |
| DST_FILE_NAME: ./output.yuv | |
| DST_FRAME_WIDTH: 1920 | |
| DST_FRAME_HEIGHT: 1080 | |
| DST_FRAME_FORMAT: YUYV | |
| DST_FILE_FORMAT: YUYV | |
| #3.How many frames to be processed | |
| FRAME_SUM: 1 | |
| #4.VPP filter type and parameters, the following filters are supported: | |
| #(VAProcFilterNone,VAProcFilterNoiseReduction,VAProcFilterDeinterlacing, | |
| # VAProcFilterSharpening,VAProcFilterColorBalance,VAProcFilterSkinToneEnhancement | |
| # defalut VAProcFilterNone) | |
| FILTER_TYPE: VAProcFilterNone | |
| #5.VPP filter specific parameters. If they are not specified here, | |
| #default value will be applied then. | |
| #5.1 Denoise filter paramters | |
| #(0.0 ~ 1.0, default 0.5) | |
| DENOISE_INTENSITY: 0.75 | |
| #5.2 Deinterlacding parameters | |
| #(VAProcDeinterlacingBob, VAProcDeinterlacingWeave, | |
| # VAProcDeinterlacingMotionAdaptive, VAProcDeinterlacingMotionCompensated, | |
| # default: VAProcDeinterlacingBob) | |
| DEINTERLACING_ALGORITHM: VAProcDeinterlacingBob | |
| #(VA_DEINTERLACING_BOTTOM_FIELD_FIRST | | |
| # VA_DEINTERLACING_BOTTOM_FIELD | | |
| # VA_DEINTERLACING_ONE_FIELD, default 0) | |
| DEINTERLACING_FLAGS: 0 | |
| #5.3 Sharpening parameters | |
| # (0.0 ~ 1.0, default 0.5) | |
| SHARPENING_INTENSITY: 0.75 | |
| #5.4 Blending | |
| # (0, 1, default 0) | |
| BLENDING_ENABLED: 0 | |
| # (VA_BLEND_GLOBAL_ALPHA | | |
| # VA_BLEND_LUMA_KEY, defalut 0) | |
| BLENDING_FLAGS: VA_BLEND_GLOBAL_ALPHA | |
| # (0.0 ~ 1.0, default 0.5) | |
| BLENDING_GLOBAL_ALPHA: 0.5 | |
| # (1 ~ 254, defalut 1) | |
| BLENDING_MIN_LUMA: 1 | |
| # (1 ~ 254, defalut 254) | |
| BLENDING_MAX_LUMA: 254 | |
| #5.5 Color balance parameters | |
| #(-180 ~ 180, default 0) | |
| COLOR_BALANCE_HUE: 0 | |
| #(0.0 ~ 10.0, default 1.0) | |
| COLOR_BALANCE_SATURATION: 1.0 | |
| #(-100 ~ 100, default 0) | |
| COLOR_BALANCE_BRIGHTNESS: 20 | |
| #(0.0 ~ 10.0, default 1.0) | |
| COLOR_BALANCE_CONTRAST: 1.2 | |
| #5.6 Skin Tone Detection and Enhancement parameters | |
| # (One of 0, 3, 6, 9, default = 0) | |
| STDE_FACTOR: 9 |