blob: dedb146ac1320af6b079fab39206783e959a3cac [file] [log] [blame]
# Distributed under the OSI-approved BSD 3-Clause License. See accompanying
# file Copyright.txt or https://cmake.org/licensing for details.
#[=======================================================================[.rst:
CSharpUtilities
---------------
.. versionadded:: 3.8
Functions to make configuration of CSharp/.NET targets easier.
A collection of CMake utility functions useful for dealing with CSharp
targets for Visual Studio generators from version 2010 and later.
The following functions are provided by this module:
**Main functions**
- :command:`csharp_set_windows_forms_properties`
- :command:`csharp_set_designer_cs_properties`
- :command:`csharp_set_xaml_cs_properties`
**Helper functions**
- :command:`csharp_get_filename_keys`
- :command:`csharp_get_filename_key_base`
- :command:`csharp_get_dependentupon_name`
Main functions provided by the module
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. command:: csharp_set_windows_forms_properties
Sets source file properties for use of Windows Forms. Use this, if your CSharp
target uses Windows Forms::
csharp_set_windows_forms_properties([<file1> [<file2> [...]]])
``<fileN>``
List of all source files which are relevant for setting the
:prop_sf:`VS_CSHARP_<tagname>` properties (including ``.cs``, ``.resx`` and
``.Designer.cs`` extensions).
In the list of all given files for all files ending with ``.Designer.cs`` and
``.resx`` is searched. For every *designer* or *resource* file a file with the
same base name but only ``.cs`` as extension is searched. If this is found, the
:prop_sf:`VS_CSHARP_<tagname>` properties are set as follows:
for the **.cs** file:
- VS_CSHARP_SubType "Form"
for the **.Designer.cs** file (if it exists):
- VS_CSHARP_DependentUpon <cs-filename>
- VS_CSHARP_DesignTime "" (delete tag if previously defined)
- VS_CSHARP_AutoGen ""(delete tag if previously defined)
for the **.resx** file (if it exists):
- VS_RESOURCE_GENERATOR "" (delete tag if previously defined)
- VS_CSHARP_DependentUpon <cs-filename>
- VS_CSHARP_SubType "Designer"
.. command:: csharp_set_designer_cs_properties
Sets source file properties of ``.Designer.cs`` files depending on
sibling filenames. Use this, if your CSharp target does **not**
use Windows Forms (for Windows Forms use
:command:`csharp_set_designer_cs_properties` instead)::
csharp_set_designer_cs_properties([<file1> [<file2> [...]]])
``<fileN>``
List of all source files which are relevant for setting the
:prop_sf:`VS_CSHARP_<tagname>` properties (including ``.cs``,
``.resx``, ``.settings`` and ``.Designer.cs`` extensions).
In the list of all given files for all files ending with
``.Designer.cs`` is searched. For every *designer* file all files
with the same base name but different extensions are searched. If
a match is found, the source file properties of the *designer* file
are set depending on the extension of the matched file:
if match is **.resx** file:
- VS_CSHARP_AutoGen "True"
- VS_CSHARP_DesignTime "True"
- VS_CSHARP_DependentUpon <resx-filename>
if match is **.cs** file:
- VS_CSHARP_DependentUpon <cs-filename>
if match is **.settings** file:
- VS_CSHARP_AutoGen "True"
- VS_CSHARP_DesignTimeSharedInput "True"
- VS_CSHARP_DependentUpon <settings-filename>
.. note::
Because the source file properties of the ``.Designer.cs`` file are set according
to the found matches and every match sets the **VS_CSHARP_DependentUpon**
property, there should only be one match for each ``Designer.cs`` file.
.. command:: csharp_set_xaml_cs_properties
Sets source file properties for use of Windows Presentation Foundation (WPF) and
XAML. Use this, if your CSharp target uses WPF/XAML::
csharp_set_xaml_cs_properties([<file1> [<file2> [...]]])
``<fileN>``
List of all source files which are relevant for setting the
:prop_sf:`VS_CSHARP_<tagname>` properties (including ``.cs``,
``.xaml``, and ``.xaml.cs`` extensions).
In the list of all given files for all files ending with
``.xaml.cs`` is searched. For every *xaml-cs* file, a file
with the same base name but extension ``.xaml`` is searched.
If a match is found, the source file properties of the ``.xaml.cs``
file are set:
- VS_CSHARP_DependentUpon <xaml-filename>
Helper functions which are used by the above ones
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
.. command:: csharp_get_filename_keys
Helper function which computes a list of key values to identify
source files independently of relative/absolute paths given in cmake
and eliminates case sensitivity::
csharp_get_filename_keys(OUT [<file1> [<file2> [...]]])
``OUT``
Name of the variable in which the list of keys is stored
``<fileN>``
filename(s) as given to to CSharp target using :command:`add_library`
or :command:`add_executable`
In some way the function applies a canonicalization to the source names.
This is necessary to find file matches if the files have been added to
the target with different directory prefixes:
.. code-block:: cmake
add_library(lib
myfile.cs
${CMAKE_CURRENT_SOURCE_DIR}/myfile.Designer.cs)
set_source_files_properties(myfile.Designer.cs PROPERTIES
VS_CSHARP_DependentUpon myfile.cs)
# this will fail, because in cmake
# - ${CMAKE_CURRENT_SOURCE_DIR}/myfile.Designer.cs
# - myfile.Designer.cs
# are not the same source file. The source file property is not set.
.. command:: csharp_get_filename_key_base
Returns the full filepath and name **without** extension of a key.
KEY is expected to be a key from csharp_get_filename_keys. In BASE
the value of KEY without the file extension is returned::
csharp_get_filename_key_base(BASE KEY)
``BASE``
Name of the variable with the computed "base" of ``KEY``.
``KEY``
The key of which the base will be computed. Expected to be a
upper case full filename.
.. command:: csharp_get_dependentupon_name
Computes a string which can be used as value for the source file property
:prop_sf:`VS_CSHARP_<tagname>` with *target* being ``DependentUpon``::
csharp_get_dependentupon_name(NAME FILE)
``NAME``
Name of the variable with the result value
``FILE``
Filename to convert to ``<DependentUpon>`` value
Actually this is only the filename without any path given at the moment.
#]=======================================================================]
cmake_policy(PUSH)
cmake_policy(SET CMP0057 NEW) # if IN_LIST
function(csharp_get_filename_keys OUT)
set(${OUT} "")
foreach(f ${ARGN})
get_filename_component(f ${f} REALPATH)
string(TOUPPER ${f} f)
list(APPEND ${OUT} ${f})
endforeach()
set(${OUT} "${${OUT}}" PARENT_SCOPE)
endfunction()
function(csharp_get_filename_key_base base key)
get_filename_component(dir ${key} DIRECTORY)
get_filename_component(fil ${key} NAME_WE)
set(${base} "${dir}/${fil}" PARENT_SCOPE)
endfunction()
function(csharp_get_dependentupon_name out in)
get_filename_component(${out} ${in} NAME)
set(${out} ${${out}} PARENT_SCOPE)
endfunction()
function(csharp_set_windows_forms_properties)
csharp_get_filename_keys(fileKeys ${ARGN})
foreach(key ${fileKeys})
get_filename_component(ext ${key} EXT)
if(${ext} STREQUAL ".DESIGNER.CS" OR
${ext} STREQUAL ".RESX")
csharp_get_filename_key_base(NAME_BASE ${key})
list(FIND fileKeys "${NAME_BASE}.CS" FILE_INDEX)
if(NOT ${FILE_INDEX} EQUAL -1)
list(GET ARGN ${FILE_INDEX} FILE_NAME)
# set properties of main form file
set_source_files_properties("${FILE_NAME}"
PROPERTIES
VS_CSHARP_SubType "Form")
csharp_get_dependentupon_name(LINK "${FILE_NAME}")
# set properties of designer file (if found)
list(FIND fileKeys "${NAME_BASE}.DESIGNER.CS" FILE_INDEX)
if(NOT ${FILE_INDEX} EQUAL -1)
list(GET ARGN ${FILE_INDEX} FILE_NAME)
set_source_files_properties("${FILE_NAME}"
PROPERTIES
VS_CSHARP_DependentUpon "${LINK}"
VS_CSHARP_DesignTime ""
VS_CSHARP_AutoGen "")
endif()
# set properties of corresponding resource file (if found)
list(FIND fileKeys "${NAME_BASE}.RESX" FILE_INDEX)
if(NOT ${FILE_INDEX} EQUAL -1)
list(GET ARGN ${FILE_INDEX} FILE_NAME)
set_source_files_properties("${FILE_NAME}"
PROPERTIES
VS_RESOURCE_GENERATOR ""
VS_CSHARP_DependentUpon "${LINK}"
VS_CSHARP_SubType "Designer")
endif()
endif()
endif()
endforeach()
endfunction()
function(csharp_set_designer_cs_properties)
csharp_get_filename_keys(fileKeys ${ARGN})
set(INDEX -1)
foreach(key ${fileKeys})
math(EXPR INDEX "${INDEX}+1")
list(GET ARGN ${INDEX} source)
get_filename_component(ext ${key} EXT)
if(${ext} STREQUAL ".DESIGNER.CS")
csharp_get_filename_key_base(NAME_BASE ${key})
if("${NAME_BASE}.RESX" IN_LIST fileKeys)
list(FIND fileKeys "${NAME_BASE}.RESX" FILE_INDEX)
list(GET ARGN ${FILE_INDEX} FILE_NAME)
csharp_get_dependentupon_name(LINK "${FILE_NAME}")
set_source_files_properties("${source}"
PROPERTIES
VS_CSHARP_AutoGen "True"
VS_CSHARP_DesignTime "True"
VS_CSHARP_DependentUpon "${LINK}")
elseif("${NAME_BASE}.CS" IN_LIST fileKeys)
list(FIND fileKeys "${NAME_BASE}.CS" FILE_INDEX)
list(GET ARGN ${FILE_INDEX} FILE_NAME)
csharp_get_dependentupon_name(LINK "${FILE_NAME}")
set_source_files_properties("${source}"
PROPERTIES
VS_CSHARP_DependentUpon "${LINK}")
elseif("${NAME_BASE}.SETTINGS" IN_LIST fileKeys)
list(FIND fileKeys "${NAME_BASE}.SETTINGS" FILE_INDEX)
list(GET ARGN ${FILE_INDEX} FILE_NAME)
csharp_get_dependentupon_name(LINK "${FILE_NAME}")
set_source_files_properties("${source}"
PROPERTIES
VS_CSHARP_AutoGen "True"
VS_CSHARP_DesignTimeSharedInput "True"
VS_CSHARP_DependentUpon "${LINK}")
endif()
endif()
endforeach()
endfunction()
function(csharp_set_xaml_cs_properties)
csharp_get_filename_keys(fileKeys ${ARGN})
set(INDEX -1)
foreach(key ${fileKeys})
math(EXPR INDEX "${INDEX}+1")
list(GET ARGN ${INDEX} source)
get_filename_component(ext ${key} EXT)
if(${ext} STREQUAL ".XAML.CS")
csharp_get_filename_key_base(NAME_BASE ${key})
if("${NAME_BASE}.XAML" IN_LIST fileKeys)
list(FIND fileKeys "${NAME_BASE}.XAML" FILE_INDEX)
list(GET ARGN ${FILE_INDEX} FILE_NAME)
csharp_get_dependentupon_name(LINK "${FILE_NAME}")
set_source_files_properties("${source}"
PROPERTIES
VS_CSHARP_DependentUpon "${LINK}")
endif()
endif()
endforeach()
endfunction()
cmake_policy(POP)