Tests/ExternalProjectUpdate/ExternalProjectUpdateTest.cmake

# Set the ExternalProject GIT_TAG to desired_tag, and make sure the
# resulting checked out version is resulting_sha and rebuild.
# This check's the correct behavior of the ExternalProject UPDATE_COMMAND.
# Also verify that a fetch only occurs when fetch_expected_tsX is 1.
macro(check_a_tag
  desired_tag
  resulting_sha
  fetch_expected_ts1  # TutorialStep1-GIT
  fetch_expected_ts2  # TutorialStep2-GIT
  update_strategy
)
  message( STATUS "Checking ExternalProjectUpdate to tag: ${desired_tag}" )

  # Remove the FETCH_HEAD file, so we can check if it gets replaced with a 'git
  # fetch'.
  set( FETCH_HEAD_file ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep1-GIT/.git/FETCH_HEAD )
  file( REMOVE ${FETCH_HEAD_file} )

  # Give ourselves a marker in the output. It is difficult to tell where we
  # are up to without this
  message(STATUS "===> check_a_tag: "
    "${desired_tag} ${resulting_sha} "
    "${fetch_expected_ts1} ${fetch_expected_ts2} "
    "${update_strategy}"
  )

  # Configure
  execute_process(COMMAND ${CMAKE_COMMAND}
    -G ${CMAKE_GENERATOR} -T "${CMAKE_GENERATOR_TOOLSET}"
    -A "${CMAKE_GENERATOR_PLATFORM}"
    -DTEST_GIT_TAG:STRING=${desired_tag}
    -DCMAKE_EP_GIT_REMOTE_UPDATE_STRATEGY:STRING=${update_strategy}
    ${ExternalProjectUpdate_SOURCE_DIR}
    WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}
    RESULT_VARIABLE error_code
    )
  if(error_code)
    message(FATAL_ERROR "Could not configure the project.")
  endif()

  # Build
  execute_process(COMMAND ${CMAKE_COMMAND}
    --build ${ExternalProjectUpdate_BINARY_DIR}
    RESULT_VARIABLE error_code
    )
  if(error_code)
    message(FATAL_ERROR "Could not build the project.")
  endif()

  # Check the resulting SHA
  execute_process(COMMAND ${GIT_EXECUTABLE}
    rev-list --max-count=1 HEAD
    WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep1-GIT
    RESULT_VARIABLE error_code
    OUTPUT_VARIABLE tag_sha
    OUTPUT_STRIP_TRAILING_WHITESPACE
    )
  if(error_code)
    message(FATAL_ERROR "Could not check the sha.")
  endif()

  if(NOT (${tag_sha} STREQUAL ${resulting_sha}))
    message(FATAL_ERROR "UPDATE_COMMAND produced
  ${tag_sha}
when
  ${resulting_sha}
was expected."
    )
  endif()

  if( NOT EXISTS ${FETCH_HEAD_file} AND ${fetch_expected_ts1})
    message( FATAL_ERROR "Fetch did NOT occur when it was expected.")
  endif()
  if( EXISTS ${FETCH_HEAD_file} AND NOT ${fetch_expected_ts1})
    message( FATAL_ERROR "Fetch DID occur when it was not expected.")
  endif()

  message( STATUS "Checking ExternalProjectUpdate to tag: ${desired_tag} (disconnected)" )

  # Remove the FETCH_HEAD file, so we can check if it gets replaced with a 'git
  # fetch'.
  set( FETCH_HEAD_file ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep2-GIT/.git/FETCH_HEAD )
  file( REMOVE ${FETCH_HEAD_file} )

  # Check initial SHA
  execute_process(COMMAND ${GIT_EXECUTABLE}
    rev-list --max-count=1 HEAD
    WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep2-GIT
    RESULT_VARIABLE error_code
    OUTPUT_VARIABLE initial_sha
    OUTPUT_STRIP_TRAILING_WHITESPACE
    )

  # Configure
  execute_process(COMMAND ${CMAKE_COMMAND}
    -G ${CMAKE_GENERATOR} -T "${CMAKE_GENERATOR_TOOLSET}"
    -A "${CMAKE_GENERATOR_PLATFORM}"
    -DTEST_GIT_TAG:STRING=${desired_tag}
    ${ExternalProjectUpdate_SOURCE_DIR}
    WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}
    RESULT_VARIABLE error_code
    )
  if(error_code)
    message(FATAL_ERROR "Could not configure the project.")
  endif()

  # Build
  execute_process(COMMAND ${CMAKE_COMMAND}
    --build ${ExternalProjectUpdate_BINARY_DIR}
    RESULT_VARIABLE error_code
    )
  if(error_code)
    message(FATAL_ERROR "Could not build the project.")
  endif()

  if( EXISTS ${FETCH_HEAD_file} )
    message( FATAL_ERROR "Fetch occurred when it was not expected.")
  endif()

  # Check the resulting SHA
  execute_process(COMMAND ${GIT_EXECUTABLE}
    rev-list --max-count=1 HEAD
    WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep2-GIT
    RESULT_VARIABLE error_code
    OUTPUT_VARIABLE tag_sha
    OUTPUT_STRIP_TRAILING_WHITESPACE
    )
  if(error_code)
    message(FATAL_ERROR "Could not check the sha.")
  endif()

  if(NOT (${tag_sha} STREQUAL ${initial_sha}))
    message(FATAL_ERROR "Update occurred when it was not expected.")
  endif()

  # Update
  execute_process(COMMAND ${CMAKE_COMMAND}
    --build ${ExternalProjectUpdate_BINARY_DIR}
    --target TutorialStep2-GIT-update
    RESULT_VARIABLE error_code
    )
  if(error_code)
    message(FATAL_ERROR "Could not build the project.")
  endif()

  # Check the resulting SHA
  execute_process(COMMAND ${GIT_EXECUTABLE}
    rev-list --max-count=1 HEAD
    WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep2-GIT
    RESULT_VARIABLE error_code
    OUTPUT_VARIABLE tag_sha
    OUTPUT_STRIP_TRAILING_WHITESPACE
    )
  if(error_code)
    message(FATAL_ERROR "Could not check the sha.")
  endif()

  if(NOT (${tag_sha} STREQUAL ${resulting_sha}))
    message(FATAL_ERROR "UPDATE_COMMAND produced
  ${tag_sha}
when
  ${resulting_sha}
was expected."
    )
  endif()

  if( NOT EXISTS ${FETCH_HEAD_file} AND ${fetch_expected_ts2})
    message( FATAL_ERROR "Fetch did NOT occur when it was expected.")
  endif()
  if( EXISTS ${FETCH_HEAD_file} AND NOT ${fetch_expected_ts2})
    message( FATAL_ERROR "Fetch DID occur when it was not expected.")
  endif()
endmacro()

find_package(Git)
set(do_git_tests 0)
if(GIT_EXECUTABLE)
  set(do_git_tests 1)

  message(STATUS "GIT_VERSION_STRING='${GIT_VERSION_STRING}'")

  if("${GIT_VERSION_STRING}" VERSION_LESS 1.6.5)
    message(STATUS "No ExternalProject git tests with git client less than version 1.6.5")
    set(do_git_tests 0)
  endif()
endif()

# When re-running tests locally, this ensures we always start afresh
file(REMOVE_RECURSE ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals)

if(do_git_tests)
  check_a_tag(origin/master b5f0fc2d442b72dd29e655c329af0062e1f8d129 1 1 REBASE)
  check_a_tag(tag1          4209914b424925d6f1b558d79454d60967d4b0f3 1 0 REBASE)
  # With the Git UPDATE_COMMAND performance patch, this will not require a
  # 'git fetch'
  check_a_tag(tag1          4209914b424925d6f1b558d79454d60967d4b0f3 0 0 REBASE)
  check_a_tag(tag2          ae72641040f1c9512f152d08afb6909f0498f958 1 0 REBASE)
  check_a_tag(4209914b42    4209914b424925d6f1b558d79454d60967d4b0f3 0 0 REBASE)
  check_a_tag(origin/master b5f0fc2d442b72dd29e655c329af0062e1f8d129 1 1 REBASE)
  # This is a remote symbolic ref, so it will always trigger a 'git fetch'
  check_a_tag(origin/master b5f0fc2d442b72dd29e655c329af0062e1f8d129 1 1 REBASE)

  foreach(strategy IN ITEMS CHECKOUT REBASE_CHECKOUT)
    # Move local master back, then apply a change that will cause a conflict
    # during rebase
    execute_process(COMMAND ${GIT_EXECUTABLE} checkout master
      WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep1-GIT
      RESULT_VARIABLE error_code
      )
    if(error_code)
      message(FATAL_ERROR "Could not reset local master back to tag1.")
    endif()
    execute_process(COMMAND ${GIT_EXECUTABLE} reset --hard tag1
      WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep1-GIT
      RESULT_VARIABLE error_code
      )
    if(error_code)
      message(FATAL_ERROR "Could not reset local master back to tag1.")
    endif()

    set(cmlFile ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep1-GIT/CMakeLists.txt)
    file(READ ${cmlFile} contents)
    string(REPLACE "find TutorialConfig.h" "find TutorialConfig.h (conflict here)"
      conflictingContent "${contents}"
      )
    file(WRITE ${cmlFile} "${conflictingContent}")
    execute_process(COMMAND ${GIT_EXECUTABLE} commit -a -m "This should cause a conflict"
      WORKING_DIRECTORY ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep1-GIT
      RESULT_VARIABLE error_code
      )
    if(error_code)
      message(FATAL_ERROR "Could not commit conflicting change.")
    endif()
    # This should discard our commit but leave behind an annotated tag
    check_a_tag(origin/master b5f0fc2d442b72dd29e655c329af0062e1f8d129 1 1 ${strategy})
  endforeach()

  # This file matches a .gitignore rule that the last commit defines. We can't
  # directly check that updates don't stash ignored contents because the stash
  # and pop are both done within the update step. We don't have an opportunity
  # to check things in between, but we can at least check that the update step
  # doesn't choke on it.
  set(ignoredFile ${ExternalProjectUpdate_BINARY_DIR}/CMakeExternals/Source/TutorialStep1-GIT/ignored_item)
  file(TOUCH ${ignoredFile})
  check_a_tag(origin/master b5f0fc2d442b72dd29e655c329af0062e1f8d129 1 1 REBASE)
  if(NOT EXISTS ${ignoredFile})
    message(FATAL_ERROR "Ignored file is missing")
  endif()

endif()