| #!/bin/sh |
| |
| # compat.sh |
| # |
| # Copyright The Mbed TLS Contributors |
| # SPDX-License-Identifier: Apache-2.0 OR GPL-2.0-or-later |
| # |
| # This file is provided under the Apache License 2.0, or the |
| # GNU General Public License v2.0 or later. |
| # |
| # ********** |
| # Apache License 2.0: |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); you may |
| # not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, WITHOUT |
| # WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| # ********** |
| # |
| # ********** |
| # GNU General Public License v2.0 or later: |
| # |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License along |
| # with this program; if not, write to the Free Software Foundation, Inc., |
| # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| # |
| # ********** |
| # |
| # Purpose |
| # |
| # Test interoperbility with OpenSSL, GnuTLS as well as itself. |
| # |
| # Check each common ciphersuite, with each version, both ways (client/server), |
| # with and without client authentication. |
| |
| set -u |
| |
| # Limit the size of each log to 10 GiB, in case of failures with this script |
| # where it may output seemingly unlimited length error logs. |
| ulimit -f 20971520 |
| |
| # initialise counters |
| TESTS=0 |
| FAILED=0 |
| SKIPPED=0 |
| SRVMEM=0 |
| |
| # default commands, can be overridden by the environment |
| : ${M_SRV:=../programs/ssl/ssl_server2} |
| : ${M_CLI:=../programs/ssl/ssl_client2} |
| : ${OPENSSL_CMD:=openssl} # OPENSSL would conflict with the build system |
| : ${GNUTLS_CLI:=gnutls-cli} |
| : ${GNUTLS_SERV:=gnutls-serv} |
| |
| # do we have a recent enough GnuTLS? |
| if ( which $GNUTLS_CLI && which $GNUTLS_SERV ) >/dev/null 2>&1; then |
| G_VER="$( $GNUTLS_CLI --version | head -n1 )" |
| if echo "$G_VER" | grep '@VERSION@' > /dev/null; then # git version |
| PEER_GNUTLS=" GnuTLS" |
| else |
| eval $( echo $G_VER | sed 's/.* \([0-9]*\)\.\([0-9]\)*\.\([0-9]*\)$/MAJOR="\1" MINOR="\2" PATCH="\3"/' ) |
| if [ $MAJOR -lt 3 -o \ |
| \( $MAJOR -eq 3 -a $MINOR -lt 2 \) -o \ |
| \( $MAJOR -eq 3 -a $MINOR -eq 2 -a $PATCH -lt 15 \) ] |
| then |
| PEER_GNUTLS="" |
| else |
| PEER_GNUTLS=" GnuTLS" |
| fi |
| fi |
| else |
| PEER_GNUTLS="" |
| fi |
| |
| # default values for options |
| MODES="tls1 tls1_1 tls1_2 dtls1 dtls1_2" |
| VERIFIES="NO YES" |
| TYPES="ECDSA RSA PSK" |
| FILTER="" |
| # exclude: |
| # - NULL: excluded from our default config |
| # - RC4, single-DES: requires legacy OpenSSL/GnuTLS versions |
| # avoid plain DES but keep 3DES-EDE-CBC (mbedTLS), DES-CBC3 (OpenSSL) |
| # - 3DES: not in default config |
| EXCLUDE='NULL\|DES\|RC4\|ARCFOUR' |
| VERBOSE="" |
| MEMCHECK=0 |
| PEERS="OpenSSL$PEER_GNUTLS mbedTLS" |
| |
| # hidden option: skip DTLS with OpenSSL |
| # (travis CI has a version that doesn't work for us) |
| : ${OSSL_NO_DTLS:=0} |
| |
| print_usage() { |
| echo "Usage: $0" |
| printf " -h|--help\tPrint this help.\n" |
| printf " -f|--filter\tOnly matching ciphersuites are tested (Default: '$FILTER')\n" |
| printf " -e|--exclude\tMatching ciphersuites are excluded (Default: '$EXCLUDE')\n" |
| printf " -m|--modes\tWhich modes to perform (Default: '$MODES')\n" |
| printf " -t|--types\tWhich key exchange type to perform (Default: '$TYPES')\n" |
| printf " -V|--verify\tWhich verification modes to perform (Default: '$VERIFIES')\n" |
| printf " -p|--peers\tWhich peers to use (Default: '$PEERS')\n" |
| printf " \tAlso available: GnuTLS (needs v3.2.15 or higher)\n" |
| printf " -M|--memcheck\tCheck memory leaks and errors.\n" |
| printf " -v|--verbose\tSet verbose output.\n" |
| } |
| |
| get_options() { |
| while [ $# -gt 0 ]; do |
| case "$1" in |
| -f|--filter) |
| shift; FILTER=$1 |
| ;; |
| -e|--exclude) |
| shift; EXCLUDE=$1 |
| ;; |
| -m|--modes) |
| shift; MODES=$1 |
| ;; |
| -t|--types) |
| shift; TYPES=$1 |
| ;; |
| -V|--verify) |
| shift; VERIFIES=$1 |
| ;; |
| -p|--peers) |
| shift; PEERS=$1 |
| ;; |
| -v|--verbose) |
| VERBOSE=1 |
| ;; |
| -M|--memcheck) |
| MEMCHECK=1 |
| ;; |
| -h|--help) |
| print_usage |
| exit 0 |
| ;; |
| *) |
| echo "Unknown argument: '$1'" |
| print_usage |
| exit 1 |
| ;; |
| esac |
| shift |
| done |
| |
| # sanitize some options (modes checked later) |
| VERIFIES="$( echo $VERIFIES | tr [a-z] [A-Z] )" |
| TYPES="$( echo $TYPES | tr [a-z] [A-Z] )" |
| } |
| |
| log() { |
| if [ "X" != "X$VERBOSE" ]; then |
| echo "" |
| echo "$@" |
| fi |
| } |
| |
| # is_dtls <mode> |
| is_dtls() |
| { |
| test "$1" = "dtls1" -o "$1" = "dtls1_2" |
| } |
| |
| # minor_ver <mode> |
| minor_ver() |
| { |
| case "$1" in |
| ssl3) |
| echo 0 |
| ;; |
| tls1) |
| echo 1 |
| ;; |
| tls1_1|dtls1) |
| echo 2 |
| ;; |
| tls1_2|dtls1_2) |
| echo 3 |
| ;; |
| *) |
| echo "error: invalid mode: $MODE" >&2 |
| # exiting is no good here, typically called in a subshell |
| echo -1 |
| esac |
| } |
| |
| filter() |
| { |
| LIST="$1" |
| NEW_LIST="" |
| |
| if is_dtls "$MODE"; then |
| EXCLMODE="$EXCLUDE"'\|RC4\|ARCFOUR' |
| else |
| EXCLMODE="$EXCLUDE" |
| fi |
| |
| for i in $LIST; |
| do |
| NEW_LIST="$NEW_LIST $( echo "$i" | grep "$FILTER" | grep -v "$EXCLMODE" )" |
| done |
| |
| # normalize whitespace |
| echo "$NEW_LIST" | sed -e 's/[[:space:]][[:space:]]*/ /g' -e 's/^ //' -e 's/ $//' |
| } |
| |
| # OpenSSL 1.0.1h with -Verify wants a ClientCertificate message even for |
| # PSK ciphersuites with DTLS, which is incorrect, so disable them for now |
| check_openssl_server_bug() |
| { |
| if test "X$VERIFY" = "XYES" && is_dtls "$MODE" && \ |
| echo "$1" | grep "^TLS-PSK" >/dev/null; |
| then |
| SKIP_NEXT="YES" |
| fi |
| } |
| |
| filter_ciphersuites() |
| { |
| if [ "X" != "X$FILTER" -o "X" != "X$EXCLUDE" ]; |
| then |
| # Ciphersuite for mbed TLS |
| M_CIPHERS=$( filter "$M_CIPHERS" ) |
| |
| # Ciphersuite for OpenSSL |
| O_CIPHERS=$( filter "$O_CIPHERS" ) |
| |
| # Ciphersuite for GnuTLS |
| G_CIPHERS=$( filter "$G_CIPHERS" ) |
| fi |
| |
| # OpenSSL <1.0.2 doesn't support DTLS 1.2. Check what OpenSSL |
| # supports from the s_server help. (The s_client help isn't |
| # accurate as of 1.0.2g: it supports DTLS 1.2 but doesn't list it. |
| # But the s_server help seems to be accurate.) |
| if ! $OPENSSL_CMD s_server -help 2>&1 | grep -q "^ *-$MODE "; then |
| M_CIPHERS="" |
| O_CIPHERS="" |
| fi |
| |
| # For GnuTLS client -> mbed TLS server, |
| # we need to force IPv4 by connecting to 127.0.0.1 but then auth fails |
| if [ "X$VERIFY" = "XYES" ] && is_dtls "$MODE"; then |
| G_CIPHERS="" |
| fi |
| } |
| |
| reset_ciphersuites() |
| { |
| M_CIPHERS="" |
| O_CIPHERS="" |
| G_CIPHERS="" |
| } |
| |
| add_common_ciphersuites() |
| { |
| case $TYPE in |
| |
| "ECDSA") |
| if [ `minor_ver "$MODE"` -gt 0 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDHE-ECDSA-WITH-NULL-SHA \ |
| TLS-ECDHE-ECDSA-WITH-RC4-128-SHA \ |
| TLS-ECDHE-ECDSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA \ |
| TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-ECDSA:+NULL:+SHA1 \ |
| +ECDHE-ECDSA:+ARCFOUR-128:+SHA1 \ |
| +ECDHE-ECDSA:+3DES-CBC:+SHA1 \ |
| +ECDHE-ECDSA:+AES-128-CBC:+SHA1 \ |
| +ECDHE-ECDSA:+AES-256-CBC:+SHA1 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDHE-ECDSA-NULL-SHA \ |
| ECDHE-ECDSA-RC4-SHA \ |
| ECDHE-ECDSA-DES-CBC3-SHA \ |
| ECDHE-ECDSA-AES128-SHA \ |
| ECDHE-ECDSA-AES256-SHA \ |
| " |
| fi |
| if [ `minor_ver "$MODE"` -ge 3 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDHE-ECDSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-ECDHE-ECDSA-WITH-AES-256-CBC-SHA384 \ |
| TLS-ECDHE-ECDSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-ECDHE-ECDSA-WITH-AES-256-GCM-SHA384 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-ECDSA:+AES-128-CBC:+SHA256 \ |
| +ECDHE-ECDSA:+AES-256-CBC:+SHA384 \ |
| +ECDHE-ECDSA:+AES-128-GCM:+AEAD \ |
| +ECDHE-ECDSA:+AES-256-GCM:+AEAD \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDHE-ECDSA-AES128-SHA256 \ |
| ECDHE-ECDSA-AES256-SHA384 \ |
| ECDHE-ECDSA-AES128-GCM-SHA256 \ |
| ECDHE-ECDSA-AES256-GCM-SHA384 \ |
| " |
| fi |
| ;; |
| |
| "RSA") |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-DHE-RSA-WITH-AES-128-CBC-SHA \ |
| TLS-DHE-RSA-WITH-AES-256-CBC-SHA \ |
| TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA \ |
| TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA \ |
| TLS-DHE-RSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-RSA-WITH-AES-256-CBC-SHA \ |
| TLS-RSA-WITH-CAMELLIA-256-CBC-SHA \ |
| TLS-RSA-WITH-AES-128-CBC-SHA \ |
| TLS-RSA-WITH-CAMELLIA-128-CBC-SHA \ |
| TLS-RSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-RSA-WITH-RC4-128-SHA \ |
| TLS-RSA-WITH-RC4-128-MD5 \ |
| TLS-RSA-WITH-NULL-MD5 \ |
| TLS-RSA-WITH-NULL-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +DHE-RSA:+AES-128-CBC:+SHA1 \ |
| +DHE-RSA:+AES-256-CBC:+SHA1 \ |
| +DHE-RSA:+CAMELLIA-128-CBC:+SHA1 \ |
| +DHE-RSA:+CAMELLIA-256-CBC:+SHA1 \ |
| +DHE-RSA:+3DES-CBC:+SHA1 \ |
| +RSA:+AES-256-CBC:+SHA1 \ |
| +RSA:+CAMELLIA-256-CBC:+SHA1 \ |
| +RSA:+AES-128-CBC:+SHA1 \ |
| +RSA:+CAMELLIA-128-CBC:+SHA1 \ |
| +RSA:+3DES-CBC:+SHA1 \ |
| +RSA:+ARCFOUR-128:+SHA1 \ |
| +RSA:+ARCFOUR-128:+MD5 \ |
| +RSA:+NULL:+MD5 \ |
| +RSA:+NULL:+SHA1 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| DHE-RSA-AES128-SHA \ |
| DHE-RSA-AES256-SHA \ |
| DHE-RSA-CAMELLIA128-SHA \ |
| DHE-RSA-CAMELLIA256-SHA \ |
| EDH-RSA-DES-CBC3-SHA \ |
| AES256-SHA \ |
| CAMELLIA256-SHA \ |
| AES128-SHA \ |
| CAMELLIA128-SHA \ |
| DES-CBC3-SHA \ |
| RC4-SHA \ |
| RC4-MD5 \ |
| NULL-MD5 \ |
| NULL-SHA \ |
| " |
| if [ `minor_ver "$MODE"` -gt 0 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA \ |
| TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA \ |
| TLS-ECDHE-RSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-ECDHE-RSA-WITH-RC4-128-SHA \ |
| TLS-ECDHE-RSA-WITH-NULL-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-RSA:+AES-128-CBC:+SHA1 \ |
| +ECDHE-RSA:+AES-256-CBC:+SHA1 \ |
| +ECDHE-RSA:+3DES-CBC:+SHA1 \ |
| +ECDHE-RSA:+ARCFOUR-128:+SHA1 \ |
| +ECDHE-RSA:+NULL:+SHA1 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDHE-RSA-AES256-SHA \ |
| ECDHE-RSA-AES128-SHA \ |
| ECDHE-RSA-DES-CBC3-SHA \ |
| ECDHE-RSA-RC4-SHA \ |
| ECDHE-RSA-NULL-SHA \ |
| " |
| fi |
| if [ `minor_ver "$MODE"` -ge 3 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-RSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-DHE-RSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-RSA-WITH-AES-256-CBC-SHA256 \ |
| TLS-DHE-RSA-WITH-AES-256-CBC-SHA256 \ |
| TLS-ECDHE-RSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-ECDHE-RSA-WITH-AES-256-CBC-SHA384 \ |
| TLS-RSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-RSA-WITH-AES-256-GCM-SHA384 \ |
| TLS-DHE-RSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-DHE-RSA-WITH-AES-256-GCM-SHA384 \ |
| TLS-ECDHE-RSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-ECDHE-RSA-WITH-AES-256-GCM-SHA384 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +RSA:+AES-128-CBC:+SHA256 \ |
| +DHE-RSA:+AES-128-CBC:+SHA256 \ |
| +RSA:+AES-256-CBC:+SHA256 \ |
| +DHE-RSA:+AES-256-CBC:+SHA256 \ |
| +ECDHE-RSA:+AES-128-CBC:+SHA256 \ |
| +ECDHE-RSA:+AES-256-CBC:+SHA384 \ |
| +RSA:+AES-128-GCM:+AEAD \ |
| +RSA:+AES-256-GCM:+AEAD \ |
| +DHE-RSA:+AES-128-GCM:+AEAD \ |
| +DHE-RSA:+AES-256-GCM:+AEAD \ |
| +ECDHE-RSA:+AES-128-GCM:+AEAD \ |
| +ECDHE-RSA:+AES-256-GCM:+AEAD \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| NULL-SHA256 \ |
| AES128-SHA256 \ |
| DHE-RSA-AES128-SHA256 \ |
| AES256-SHA256 \ |
| DHE-RSA-AES256-SHA256 \ |
| ECDHE-RSA-AES128-SHA256 \ |
| ECDHE-RSA-AES256-SHA384 \ |
| AES128-GCM-SHA256 \ |
| DHE-RSA-AES128-GCM-SHA256 \ |
| AES256-GCM-SHA384 \ |
| DHE-RSA-AES256-GCM-SHA384 \ |
| ECDHE-RSA-AES128-GCM-SHA256 \ |
| ECDHE-RSA-AES256-GCM-SHA384 \ |
| " |
| fi |
| ;; |
| |
| "PSK") |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-PSK-WITH-RC4-128-SHA \ |
| TLS-PSK-WITH-3DES-EDE-CBC-SHA \ |
| TLS-PSK-WITH-AES-128-CBC-SHA \ |
| TLS-PSK-WITH-AES-256-CBC-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +PSK:+ARCFOUR-128:+SHA1 \ |
| +PSK:+3DES-CBC:+SHA1 \ |
| +PSK:+AES-128-CBC:+SHA1 \ |
| +PSK:+AES-256-CBC:+SHA1 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| PSK-RC4-SHA \ |
| PSK-3DES-EDE-CBC-SHA \ |
| PSK-AES128-CBC-SHA \ |
| PSK-AES256-CBC-SHA \ |
| " |
| ;; |
| esac |
| } |
| |
| add_openssl_ciphersuites() |
| { |
| case $TYPE in |
| |
| "ECDSA") |
| if [ `minor_ver "$MODE"` -gt 0 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDH-ECDSA-WITH-NULL-SHA \ |
| TLS-ECDH-ECDSA-WITH-RC4-128-SHA \ |
| TLS-ECDH-ECDSA-WITH-3DES-EDE-CBC-SHA \ |
| TLS-ECDH-ECDSA-WITH-AES-128-CBC-SHA \ |
| TLS-ECDH-ECDSA-WITH-AES-256-CBC-SHA \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDH-ECDSA-NULL-SHA \ |
| ECDH-ECDSA-RC4-SHA \ |
| ECDH-ECDSA-DES-CBC3-SHA \ |
| ECDH-ECDSA-AES128-SHA \ |
| ECDH-ECDSA-AES256-SHA \ |
| " |
| fi |
| if [ `minor_ver "$MODE"` -ge 3 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDH-ECDSA-WITH-AES-128-CBC-SHA256 \ |
| TLS-ECDH-ECDSA-WITH-AES-256-CBC-SHA384 \ |
| TLS-ECDH-ECDSA-WITH-AES-128-GCM-SHA256 \ |
| TLS-ECDH-ECDSA-WITH-AES-256-GCM-SHA384 \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| ECDH-ECDSA-AES128-SHA256 \ |
| ECDH-ECDSA-AES256-SHA384 \ |
| ECDH-ECDSA-AES128-GCM-SHA256 \ |
| ECDH-ECDSA-AES256-GCM-SHA384 \ |
| " |
| fi |
| ;; |
| |
| "RSA") |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-RSA-WITH-DES-CBC-SHA \ |
| TLS-DHE-RSA-WITH-DES-CBC-SHA \ |
| " |
| O_CIPHERS="$O_CIPHERS \ |
| DES-CBC-SHA \ |
| EDH-RSA-DES-CBC-SHA \ |
| " |
| ;; |
| |
| "PSK") |
| ;; |
| esac |
| } |
| |
| add_gnutls_ciphersuites() |
| { |
| case $TYPE in |
| |
| "ECDSA") |
| if [ `minor_ver "$MODE"` -ge 3 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-ECDHE-ECDSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-ECDHE-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-ECDSA:+CAMELLIA-128-CBC:+SHA256 \ |
| +ECDHE-ECDSA:+CAMELLIA-256-CBC:+SHA384 \ |
| +ECDHE-ECDSA:+CAMELLIA-128-GCM:+AEAD \ |
| +ECDHE-ECDSA:+CAMELLIA-256-GCM:+AEAD \ |
| " |
| fi |
| ;; |
| |
| "RSA") |
| if [ `minor_ver "$MODE"` -gt 0 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-RSA-WITH-NULL-SHA256 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +RSA:+NULL:+SHA256 \ |
| " |
| fi |
| if [ `minor_ver "$MODE"` -ge 3 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-ECDHE-RSA-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-RSA-WITH-CAMELLIA-256-CBC-SHA256 \ |
| TLS-DHE-RSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-DHE-RSA-WITH-CAMELLIA-256-CBC-SHA256 \ |
| TLS-ECDHE-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-ECDHE-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-DHE-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-DHE-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-RSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-RSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-RSA:+CAMELLIA-128-CBC:+SHA256 \ |
| +ECDHE-RSA:+CAMELLIA-256-CBC:+SHA384 \ |
| +RSA:+CAMELLIA-128-CBC:+SHA256 \ |
| +RSA:+CAMELLIA-256-CBC:+SHA256 \ |
| +DHE-RSA:+CAMELLIA-128-CBC:+SHA256 \ |
| +DHE-RSA:+CAMELLIA-256-CBC:+SHA256 \ |
| +ECDHE-RSA:+CAMELLIA-128-GCM:+AEAD \ |
| +ECDHE-RSA:+CAMELLIA-256-GCM:+AEAD \ |
| +DHE-RSA:+CAMELLIA-128-GCM:+AEAD \ |
| +DHE-RSA:+CAMELLIA-256-GCM:+AEAD \ |
| +RSA:+CAMELLIA-128-GCM:+AEAD \ |
| +RSA:+CAMELLIA-256-GCM:+AEAD \ |
| " |
| fi |
| ;; |
| |
| "PSK") |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-DHE-PSK-WITH-3DES-EDE-CBC-SHA \ |
| TLS-DHE-PSK-WITH-AES-128-CBC-SHA \ |
| TLS-DHE-PSK-WITH-AES-256-CBC-SHA \ |
| TLS-DHE-PSK-WITH-RC4-128-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +DHE-PSK:+3DES-CBC:+SHA1 \ |
| +DHE-PSK:+AES-128-CBC:+SHA1 \ |
| +DHE-PSK:+AES-256-CBC:+SHA1 \ |
| +DHE-PSK:+ARCFOUR-128:+SHA1 \ |
| " |
| if [ `minor_ver "$MODE"` -gt 0 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDHE-PSK-WITH-AES-256-CBC-SHA \ |
| TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA \ |
| TLS-ECDHE-PSK-WITH-3DES-EDE-CBC-SHA \ |
| TLS-ECDHE-PSK-WITH-RC4-128-SHA \ |
| TLS-RSA-PSK-WITH-3DES-EDE-CBC-SHA \ |
| TLS-RSA-PSK-WITH-AES-256-CBC-SHA \ |
| TLS-RSA-PSK-WITH-AES-128-CBC-SHA \ |
| TLS-RSA-PSK-WITH-RC4-128-SHA \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-PSK:+3DES-CBC:+SHA1 \ |
| +ECDHE-PSK:+AES-128-CBC:+SHA1 \ |
| +ECDHE-PSK:+AES-256-CBC:+SHA1 \ |
| +ECDHE-PSK:+ARCFOUR-128:+SHA1 \ |
| +RSA-PSK:+3DES-CBC:+SHA1 \ |
| +RSA-PSK:+AES-256-CBC:+SHA1 \ |
| +RSA-PSK:+AES-128-CBC:+SHA1 \ |
| +RSA-PSK:+ARCFOUR-128:+SHA1 \ |
| " |
| fi |
| if [ `minor_ver "$MODE"` -ge 3 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDHE-PSK-WITH-AES-256-CBC-SHA384 \ |
| TLS-ECDHE-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-ECDHE-PSK-WITH-AES-128-CBC-SHA256 \ |
| TLS-ECDHE-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-ECDHE-PSK-WITH-NULL-SHA384 \ |
| TLS-ECDHE-PSK-WITH-NULL-SHA256 \ |
| TLS-PSK-WITH-AES-128-CBC-SHA256 \ |
| TLS-PSK-WITH-AES-256-CBC-SHA384 \ |
| TLS-DHE-PSK-WITH-AES-128-CBC-SHA256 \ |
| TLS-DHE-PSK-WITH-AES-256-CBC-SHA384 \ |
| TLS-PSK-WITH-NULL-SHA256 \ |
| TLS-PSK-WITH-NULL-SHA384 \ |
| TLS-DHE-PSK-WITH-NULL-SHA256 \ |
| TLS-DHE-PSK-WITH-NULL-SHA384 \ |
| TLS-RSA-PSK-WITH-AES-256-CBC-SHA384 \ |
| TLS-RSA-PSK-WITH-AES-128-CBC-SHA256 \ |
| TLS-RSA-PSK-WITH-NULL-SHA256 \ |
| TLS-RSA-PSK-WITH-NULL-SHA384 \ |
| TLS-DHE-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-DHE-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-RSA-PSK-WITH-CAMELLIA-256-CBC-SHA384 \ |
| TLS-RSA-PSK-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-PSK-WITH-AES-128-GCM-SHA256 \ |
| TLS-PSK-WITH-AES-256-GCM-SHA384 \ |
| TLS-DHE-PSK-WITH-AES-128-GCM-SHA256 \ |
| TLS-DHE-PSK-WITH-AES-256-GCM-SHA384 \ |
| TLS-RSA-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-RSA-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-DHE-PSK-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-DHE-PSK-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-RSA-PSK-WITH-AES-256-GCM-SHA384 \ |
| TLS-RSA-PSK-WITH-AES-128-GCM-SHA256 \ |
| " |
| G_CIPHERS="$G_CIPHERS \ |
| +ECDHE-PSK:+AES-256-CBC:+SHA384 \ |
| +ECDHE-PSK:+CAMELLIA-256-CBC:+SHA384 \ |
| +ECDHE-PSK:+AES-128-CBC:+SHA256 \ |
| +ECDHE-PSK:+CAMELLIA-128-CBC:+SHA256 \ |
| +PSK:+AES-128-CBC:+SHA256 \ |
| +PSK:+AES-256-CBC:+SHA384 \ |
| +DHE-PSK:+AES-128-CBC:+SHA256 \ |
| +DHE-PSK:+AES-256-CBC:+SHA384 \ |
| +RSA-PSK:+AES-256-CBC:+SHA384 \ |
| +RSA-PSK:+AES-128-CBC:+SHA256 \ |
| +DHE-PSK:+CAMELLIA-128-CBC:+SHA256 \ |
| +DHE-PSK:+CAMELLIA-256-CBC:+SHA384 \ |
| +PSK:+CAMELLIA-128-CBC:+SHA256 \ |
| +PSK:+CAMELLIA-256-CBC:+SHA384 \ |
| +RSA-PSK:+CAMELLIA-256-CBC:+SHA384 \ |
| +RSA-PSK:+CAMELLIA-128-CBC:+SHA256 \ |
| +PSK:+AES-128-GCM:+AEAD \ |
| +PSK:+AES-256-GCM:+AEAD \ |
| +DHE-PSK:+AES-128-GCM:+AEAD \ |
| +DHE-PSK:+AES-256-GCM:+AEAD \ |
| +RSA-PSK:+CAMELLIA-128-GCM:+AEAD \ |
| +RSA-PSK:+CAMELLIA-256-GCM:+AEAD \ |
| +PSK:+CAMELLIA-128-GCM:+AEAD \ |
| +PSK:+CAMELLIA-256-GCM:+AEAD \ |
| +DHE-PSK:+CAMELLIA-128-GCM:+AEAD \ |
| +DHE-PSK:+CAMELLIA-256-GCM:+AEAD \ |
| +RSA-PSK:+AES-256-GCM:+AEAD \ |
| +RSA-PSK:+AES-128-GCM:+AEAD \ |
| +ECDHE-PSK:+NULL:+SHA384 \ |
| +ECDHE-PSK:+NULL:+SHA256 \ |
| +PSK:+NULL:+SHA256 \ |
| +PSK:+NULL:+SHA384 \ |
| +DHE-PSK:+NULL:+SHA256 \ |
| +DHE-PSK:+NULL:+SHA384 \ |
| +RSA-PSK:+NULL:+SHA256 \ |
| +RSA-PSK:+NULL:+SHA384 \ |
| " |
| fi |
| ;; |
| esac |
| } |
| |
| add_mbedtls_ciphersuites() |
| { |
| case $TYPE in |
| |
| "ECDSA") |
| if [ `minor_ver "$MODE"` -gt 0 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDH-ECDSA-WITH-CAMELLIA-128-CBC-SHA256 \ |
| TLS-ECDH-ECDSA-WITH-CAMELLIA-256-CBC-SHA384 \ |
| " |
| fi |
| if [ `minor_ver "$MODE"` -ge 3 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDH-ECDSA-WITH-CAMELLIA-128-GCM-SHA256 \ |
| TLS-ECDH-ECDSA-WITH-CAMELLIA-256-GCM-SHA384 \ |
| TLS-ECDHE-ECDSA-WITH-AES-128-CCM \ |
| TLS-ECDHE-ECDSA-WITH-AES-256-CCM \ |
| TLS-ECDHE-ECDSA-WITH-AES-128-CCM-8 \ |
| TLS-ECDHE-ECDSA-WITH-AES-256-CCM-8 \ |
| " |
| fi |
| ;; |
| |
| "RSA") |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-RSA-WITH-AES-128-CCM \ |
| TLS-RSA-WITH-AES-256-CCM \ |
| TLS-DHE-RSA-WITH-AES-128-CCM \ |
| TLS-DHE-RSA-WITH-AES-256-CCM \ |
| TLS-RSA-WITH-AES-128-CCM-8 \ |
| TLS-RSA-WITH-AES-256-CCM-8 \ |
| TLS-DHE-RSA-WITH-AES-128-CCM-8 \ |
| TLS-DHE-RSA-WITH-AES-256-CCM-8 \ |
| " |
| fi |
| ;; |
| |
| "PSK") |
| # *PSK-NULL-SHA suites supported by GnuTLS 3.3.5 but not 3.2.15 |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-PSK-WITH-NULL-SHA \ |
| TLS-DHE-PSK-WITH-NULL-SHA \ |
| " |
| if [ `minor_ver "$MODE"` -gt 0 ] |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-ECDHE-PSK-WITH-NULL-SHA \ |
| TLS-RSA-PSK-WITH-NULL-SHA \ |
| " |
| fi |
| if [ "$MODE" = "tls1_2" ]; |
| then |
| M_CIPHERS="$M_CIPHERS \ |
| TLS-PSK-WITH-AES-128-CCM \ |
| TLS-PSK-WITH-AES-256-CCM \ |
| TLS-DHE-PSK-WITH-AES-128-CCM \ |
| TLS-DHE-PSK-WITH-AES-256-CCM \ |
| TLS-PSK-WITH-AES-128-CCM-8 \ |
| TLS-PSK-WITH-AES-256-CCM-8 \ |
| TLS-DHE-PSK-WITH-AES-128-CCM-8 \ |
| TLS-DHE-PSK-WITH-AES-256-CCM-8 \ |
| " |
| fi |
| ;; |
| esac |
| } |
| |
| setup_arguments() |
| { |
| G_MODE="" |
| case "$MODE" in |
| "ssl3") |
| G_PRIO_MODE="+VERS-SSL3.0" |
| ;; |
| "tls1") |
| G_PRIO_MODE="+VERS-TLS1.0" |
| ;; |
| "tls1_1") |
| G_PRIO_MODE="+VERS-TLS1.1" |
| ;; |
| "tls1_2") |
| G_PRIO_MODE="+VERS-TLS1.2" |
| ;; |
| "dtls1") |
| G_PRIO_MODE="+VERS-DTLS1.0" |
| G_MODE="-u" |
| ;; |
| "dtls1_2") |
| G_PRIO_MODE="+VERS-DTLS1.2" |
| G_MODE="-u" |
| ;; |
| *) |
| echo "error: invalid mode: $MODE" >&2 |
| exit 1; |
| esac |
| |
| M_SERVER_ARGS="server_port=$PORT server_addr=0.0.0.0 force_version=$MODE arc4=1" |
| O_SERVER_ARGS="-accept $PORT -cipher NULL,ALL -$MODE -dhparam data_files/dhparams.pem" |
| G_SERVER_ARGS="-p $PORT --http $G_MODE" |
| G_SERVER_PRIO="NORMAL:+ARCFOUR-128:+NULL:+MD5:+PSK:+DHE-PSK:+ECDHE-PSK:+SHA256:+SHA384:+RSA-PSK:-VERS-TLS-ALL:$G_PRIO_MODE" |
| |
| # with OpenSSL 1.0.1h, -www, -WWW and -HTTP break DTLS handshakes |
| if is_dtls "$MODE"; then |
| O_SERVER_ARGS="$O_SERVER_ARGS" |
| else |
| O_SERVER_ARGS="$O_SERVER_ARGS -www" |
| fi |
| |
| M_CLIENT_ARGS="server_port=$PORT server_addr=127.0.0.1 force_version=$MODE" |
| O_CLIENT_ARGS="-connect localhost:$PORT -$MODE" |
| G_CLIENT_ARGS="-p $PORT --debug 3 $G_MODE" |
| G_CLIENT_PRIO="NONE:$G_PRIO_MODE:+COMP-NULL:+CURVE-ALL:+SIGN-ALL" |
| |
| if [ "X$VERIFY" = "XYES" ]; |
| then |
| M_SERVER_ARGS="$M_SERVER_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required" |
| O_SERVER_ARGS="$O_SERVER_ARGS -CAfile data_files/test-ca_cat12.crt -Verify 10" |
| G_SERVER_ARGS="$G_SERVER_ARGS --x509cafile data_files/test-ca_cat12.crt --require-client-cert" |
| |
| M_CLIENT_ARGS="$M_CLIENT_ARGS ca_file=data_files/test-ca_cat12.crt auth_mode=required" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS -CAfile data_files/test-ca_cat12.crt -verify 10" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --x509cafile data_files/test-ca_cat12.crt" |
| else |
| # don't request a client cert at all |
| M_SERVER_ARGS="$M_SERVER_ARGS ca_file=none auth_mode=none" |
| G_SERVER_ARGS="$G_SERVER_ARGS --disable-client-cert" |
| |
| M_CLIENT_ARGS="$M_CLIENT_ARGS ca_file=none auth_mode=none" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --insecure" |
| fi |
| |
| case $TYPE in |
| "ECDSA") |
| M_SERVER_ARGS="$M_SERVER_ARGS crt_file=data_files/server5.crt key_file=data_files/server5.key" |
| O_SERVER_ARGS="$O_SERVER_ARGS -cert data_files/server5.crt -key data_files/server5.key" |
| G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server5.crt --x509keyfile data_files/server5.key" |
| |
| if [ "X$VERIFY" = "XYES" ]; then |
| M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=data_files/server6.crt key_file=data_files/server6.key" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS -cert data_files/server6.crt -key data_files/server6.key" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --x509certfile data_files/server6.crt --x509keyfile data_files/server6.key" |
| else |
| M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=none key_file=none" |
| fi |
| ;; |
| |
| "RSA") |
| M_SERVER_ARGS="$M_SERVER_ARGS crt_file=data_files/server2-sha256.crt key_file=data_files/server2.key" |
| O_SERVER_ARGS="$O_SERVER_ARGS -cert data_files/server2-sha256.crt -key data_files/server2.key" |
| G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server2-sha256.crt --x509keyfile data_files/server2.key" |
| |
| if [ "X$VERIFY" = "XYES" ]; then |
| M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=data_files/cert_sha256.crt key_file=data_files/server1.key" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS -cert data_files/cert_sha256.crt -key data_files/server1.key" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --x509certfile data_files/cert_sha256.crt --x509keyfile data_files/server1.key" |
| else |
| M_CLIENT_ARGS="$M_CLIENT_ARGS crt_file=none key_file=none" |
| fi |
| ;; |
| |
| "PSK") |
| # give RSA-PSK-capable server a RSA cert |
| # (should be a separate type, but harder to close with openssl) |
| M_SERVER_ARGS="$M_SERVER_ARGS psk=6162636465666768696a6b6c6d6e6f70 ca_file=none crt_file=data_files/server2-sha256.crt key_file=data_files/server2.key" |
| O_SERVER_ARGS="$O_SERVER_ARGS -psk 6162636465666768696a6b6c6d6e6f70 -nocert" |
| G_SERVER_ARGS="$G_SERVER_ARGS --x509certfile data_files/server2-sha256.crt --x509keyfile data_files/server2.key --pskpasswd data_files/passwd.psk" |
| |
| M_CLIENT_ARGS="$M_CLIENT_ARGS psk=6162636465666768696a6b6c6d6e6f70 crt_file=none key_file=none" |
| O_CLIENT_ARGS="$O_CLIENT_ARGS -psk 6162636465666768696a6b6c6d6e6f70" |
| G_CLIENT_ARGS="$G_CLIENT_ARGS --pskusername Client_identity --pskkey=6162636465666768696a6b6c6d6e6f70" |
| ;; |
| esac |
| } |
| |
| # is_mbedtls <cmd_line> |
| is_mbedtls() { |
| echo "$1" | grep 'ssl_server2\|ssl_client2' > /dev/null |
| } |
| |
| # has_mem_err <log_file_name> |
| has_mem_err() { |
| if ( grep -F 'All heap blocks were freed -- no leaks are possible' "$1" && |
| grep -F 'ERROR SUMMARY: 0 errors from 0 contexts' "$1" ) > /dev/null |
| then |
| return 1 # false: does not have errors |
| else |
| return 0 # true: has errors |
| fi |
| } |
| |
| # Wait for process $2 to be listening on port $1 |
| if type lsof >/dev/null 2>/dev/null; then |
| wait_server_start() { |
| START_TIME=$(date +%s) |
| if is_dtls "$MODE"; then |
| proto=UDP |
| else |
| proto=TCP |
| fi |
| while ! lsof -a -n -b -i "$proto:$1" -p "$2" >/dev/null 2>/dev/null; do |
| if [ $(( $(date +%s) - $START_TIME )) -gt $DOG_DELAY ]; then |
| echo "SERVERSTART TIMEOUT" |
| echo "SERVERSTART TIMEOUT" >> $SRV_OUT |
| break |
| fi |
| # Linux and *BSD support decimal arguments to sleep. On other |
| # OSes this may be a tight loop. |
| sleep 0.1 2>/dev/null || true |
| done |
| } |
| else |
| echo "Warning: lsof not available, wait_server_start = sleep" |
| wait_server_start() { |
| sleep 2 |
| } |
| fi |
| |
| |
| # start_server <name> |
| # also saves name and command |
| start_server() { |
| case $1 in |
| [Oo]pen*) |
| SERVER_CMD="$OPENSSL_CMD s_server $O_SERVER_ARGS" |
| ;; |
| [Gg]nu*) |
| SERVER_CMD="$GNUTLS_SERV $G_SERVER_ARGS --priority $G_SERVER_PRIO" |
| ;; |
| mbed*) |
| SERVER_CMD="$M_SRV $M_SERVER_ARGS" |
| if [ "$MEMCHECK" -gt 0 ]; then |
| SERVER_CMD="valgrind --leak-check=full $SERVER_CMD" |
| fi |
| ;; |
| *) |
| echo "error: invalid server name: $1" >&2 |
| exit 1 |
| ;; |
| esac |
| SERVER_NAME=$1 |
| |
| log "$SERVER_CMD" |
| echo "$SERVER_CMD" > $SRV_OUT |
| # for servers without -www or equivalent |
| while :; do echo bla; sleep 1; done | $SERVER_CMD >> $SRV_OUT 2>&1 & |
| PROCESS_ID=$! |
| |
| wait_server_start "$PORT" "$PROCESS_ID" |
| } |
| |
| # terminate the running server |
| stop_server() { |
| kill $PROCESS_ID 2>/dev/null |
| wait $PROCESS_ID 2>/dev/null |
| |
| if [ "$MEMCHECK" -gt 0 ]; then |
| if is_mbedtls "$SERVER_CMD" && has_mem_err $SRV_OUT; then |
| echo " ! Server had memory errors" |
| SRVMEM=$(( $SRVMEM + 1 )) |
| return |
| fi |
| fi |
| |
| rm -f $SRV_OUT |
| } |
| |
| # kill the running server (used when killed by signal) |
| cleanup() { |
| rm -f $SRV_OUT $CLI_OUT |
| kill $PROCESS_ID >/dev/null 2>&1 |
| kill $WATCHDOG_PID >/dev/null 2>&1 |
| exit 1 |
| } |
| |
| # wait for client to terminate and set EXIT |
| # must be called right after starting the client |
| wait_client_done() { |
| CLI_PID=$! |
| |
| ( sleep "$DOG_DELAY"; echo "TIMEOUT" >> $CLI_OUT; kill $CLI_PID ) & |
| WATCHDOG_PID=$! |
| |
| wait $CLI_PID |
| EXIT=$? |
| |
| kill $WATCHDOG_PID |
| wait $WATCHDOG_PID |
| |
| echo "EXIT: $EXIT" >> $CLI_OUT |
| } |
| |
| # run_client <name> <cipher> |
| run_client() { |
| # announce what we're going to do |
| TESTS=$(( $TESTS + 1 )) |
| VERIF=$(echo $VERIFY | tr '[:upper:]' '[:lower:]') |
| TITLE="`echo $1 | head -c1`->`echo $SERVER_NAME | head -c1`" |
| TITLE="$TITLE $MODE,$VERIF $2" |
| printf "$TITLE " |
| LEN=$(( 72 - `echo "$TITLE" | wc -c` )) |
| for i in `seq 1 $LEN`; do printf '.'; done; printf ' ' |
| |
| # should we skip? |
| if [ "X$SKIP_NEXT" = "XYES" ]; then |
| SKIP_NEXT="NO" |
| echo "SKIP" |
| SKIPPED=$(( $SKIPPED + 1 )) |
| return |
| fi |
| |
| # run the command and interpret result |
| case $1 in |
| [Oo]pen*) |
| CLIENT_CMD="$OPENSSL_CMD s_client $O_CLIENT_ARGS -cipher $2" |
| log "$CLIENT_CMD" |
| echo "$CLIENT_CMD" > $CLI_OUT |
| printf 'GET HTTP/1.0\r\n\r\n' | $CLIENT_CMD >> $CLI_OUT 2>&1 & |
| wait_client_done |
| |
| if [ $EXIT -eq 0 ]; then |
| RESULT=0 |
| else |
| # If the cipher isn't supported... |
| if grep 'Cipher is (NONE)' $CLI_OUT >/dev/null; then |
| RESULT=1 |
| else |
| RESULT=2 |
| fi |
| fi |
| ;; |
| |
| [Gg]nu*) |
| # need to force IPv4 with UDP, but keep localhost for auth |
| if is_dtls "$MODE"; then |
| G_HOST="127.0.0.1" |
| else |
| G_HOST="localhost" |
| fi |
| CLIENT_CMD="$GNUTLS_CLI $G_CLIENT_ARGS --priority $G_PRIO_MODE:$2 $G_HOST" |
| log "$CLIENT_CMD" |
| echo "$CLIENT_CMD" > $CLI_OUT |
| printf 'GET HTTP/1.0\r\n\r\n' | $CLIENT_CMD >> $CLI_OUT 2>&1 & |
| wait_client_done |
| |
| if [ $EXIT -eq 0 ]; then |
| RESULT=0 |
| else |
| RESULT=2 |
| # interpret early failure, with a handshake_failure alert |
| # before the server hello, as "no ciphersuite in common" |
| if grep -F 'Received alert [40]: Handshake failed' $CLI_OUT; then |
| if grep -i 'SERVER HELLO .* was received' $CLI_OUT; then : |
| else |
| RESULT=1 |
| fi |
| fi >/dev/null |
| fi |
| ;; |
| |
| mbed*) |
| CLIENT_CMD="$M_CLI $M_CLIENT_ARGS force_ciphersuite=$2" |
| if [ "$MEMCHECK" -gt 0 ]; then |
| CLIENT_CMD="valgrind --leak-check=full $CLIENT_CMD" |
| fi |
| log "$CLIENT_CMD" |
| echo "$CLIENT_CMD" > $CLI_OUT |
| $CLIENT_CMD >> $CLI_OUT 2>&1 & |
| wait_client_done |
| |
| case $EXIT in |
| # Success |
| "0") RESULT=0 ;; |
| |
| # Ciphersuite not supported |
| "2") RESULT=1 ;; |
| |
| # Error |
| *) RESULT=2 ;; |
| esac |
| |
| if [ "$MEMCHECK" -gt 0 ]; then |
| if is_mbedtls "$CLIENT_CMD" && has_mem_err $CLI_OUT; then |
| RESULT=2 |
| fi |
| fi |
| |
| ;; |
| |
| *) |
| echo "error: invalid client name: $1" >&2 |
| exit 1 |
| ;; |
| esac |
| |
| echo "EXIT: $EXIT" >> $CLI_OUT |
| |
| # report and count result |
| case $RESULT in |
| "0") |
| echo PASS |
| ;; |
| "1") |
| echo SKIP |
| SKIPPED=$(( $SKIPPED + 1 )) |
| ;; |
| "2") |
| echo FAIL |
| cp $SRV_OUT c-srv-${TESTS}.log |
| cp $CLI_OUT c-cli-${TESTS}.log |
| echo " ! outputs saved to c-srv-${TESTS}.log, c-cli-${TESTS}.log" |
| |
| if [ "${LOG_FAILURE_ON_STDOUT:-0}" != 0 ]; then |
| echo " ! server output:" |
| cat c-srv-${TESTS}.log |
| echo " ! ===================================================" |
| echo " ! client output:" |
| cat c-cli-${TESTS}.log |
| fi |
| |
| FAILED=$(( $FAILED + 1 )) |
| ;; |
| esac |
| |
| rm -f $CLI_OUT |
| } |
| |
| # |
| # MAIN |
| # |
| |
| if cd $( dirname $0 ); then :; else |
| echo "cd $( dirname $0 ) failed" >&2 |
| exit 1 |
| fi |
| |
| get_options "$@" |
| |
| # sanity checks, avoid an avalanche of errors |
| if [ ! -x "$M_SRV" ]; then |
| echo "Command '$M_SRV' is not an executable file" >&2 |
| exit 1 |
| fi |
| if [ ! -x "$M_CLI" ]; then |
| echo "Command '$M_CLI' is not an executable file" >&2 |
| exit 1 |
| fi |
| |
| if echo "$PEERS" | grep -i openssl > /dev/null; then |
| if which "$OPENSSL_CMD" >/dev/null 2>&1; then :; else |
| echo "Command '$OPENSSL_CMD' not found" >&2 |
| exit 1 |
| fi |
| fi |
| |
| if echo "$PEERS" | grep -i gnutls > /dev/null; then |
| for CMD in "$GNUTLS_CLI" "$GNUTLS_SERV"; do |
| if which "$CMD" >/dev/null 2>&1; then :; else |
| echo "Command '$CMD' not found" >&2 |
| exit 1 |
| fi |
| done |
| fi |
| |
| for PEER in $PEERS; do |
| case "$PEER" in |
| mbed*|[Oo]pen*|[Gg]nu*) |
| ;; |
| *) |
| echo "Unknown peers: $PEER" >&2 |
| exit 1 |
| esac |
| done |
| |
| # Pick a "unique" port in the range 10000-19999. |
| PORT="0000$$" |
| PORT="1$(echo $PORT | tail -c 5)" |
| |
| # Also pick a unique name for intermediate files |
| SRV_OUT="srv_out.$$" |
| CLI_OUT="cli_out.$$" |
| |
| # client timeout delay: be more patient with valgrind |
| if [ "$MEMCHECK" -gt 0 ]; then |
| DOG_DELAY=30 |
| else |
| DOG_DELAY=10 |
| fi |
| |
| SKIP_NEXT="NO" |
| |
| trap cleanup INT TERM HUP |
| |
| for VERIFY in $VERIFIES; do |
| for MODE in $MODES; do |
| for TYPE in $TYPES; do |
| for PEER in $PEERS; do |
| |
| setup_arguments |
| |
| case "$PEER" in |
| |
| [Oo]pen*) |
| |
| if test "$OSSL_NO_DTLS" -gt 0 && is_dtls "$MODE"; then |
| continue; |
| fi |
| |
| reset_ciphersuites |
| add_common_ciphersuites |
| add_openssl_ciphersuites |
| filter_ciphersuites |
| |
| if [ "X" != "X$M_CIPHERS" ]; then |
| start_server "OpenSSL" |
| for i in $M_CIPHERS; do |
| check_openssl_server_bug $i |
| run_client mbedTLS $i |
| done |
| stop_server |
| fi |
| |
| if [ "X" != "X$O_CIPHERS" ]; then |
| start_server "mbedTLS" |
| for i in $O_CIPHERS; do |
| run_client OpenSSL $i |
| done |
| stop_server |
| fi |
| |
| ;; |
| |
| [Gg]nu*) |
| |
| reset_ciphersuites |
| add_common_ciphersuites |
| add_gnutls_ciphersuites |
| filter_ciphersuites |
| |
| if [ "X" != "X$M_CIPHERS" ]; then |
| start_server "GnuTLS" |
| for i in $M_CIPHERS; do |
| run_client mbedTLS $i |
| done |
| stop_server |
| fi |
| |
| if [ "X" != "X$G_CIPHERS" ]; then |
| start_server "mbedTLS" |
| for i in $G_CIPHERS; do |
| run_client GnuTLS $i |
| done |
| stop_server |
| fi |
| |
| ;; |
| |
| mbed*) |
| |
| reset_ciphersuites |
| add_common_ciphersuites |
| add_openssl_ciphersuites |
| add_gnutls_ciphersuites |
| add_mbedtls_ciphersuites |
| filter_ciphersuites |
| |
| if [ "X" != "X$M_CIPHERS" ]; then |
| start_server "mbedTLS" |
| for i in $M_CIPHERS; do |
| run_client mbedTLS $i |
| done |
| stop_server |
| fi |
| |
| ;; |
| |
| *) |
| echo "Unknown peer: $PEER" >&2 |
| exit 1 |
| ;; |
| |
| esac |
| |
| done |
| done |
| done |
| done |
| |
| echo "------------------------------------------------------------------------" |
| |
| if [ $FAILED -ne 0 -o $SRVMEM -ne 0 ]; |
| then |
| printf "FAILED" |
| else |
| printf "PASSED" |
| fi |
| |
| if [ "$MEMCHECK" -gt 0 ]; then |
| MEMREPORT=", $SRVMEM server memory errors" |
| else |
| MEMREPORT="" |
| fi |
| |
| PASSED=$(( $TESTS - $FAILED )) |
| echo " ($PASSED / $TESTS tests ($SKIPPED skipped$MEMREPORT))" |
| |
| FAILED=$(( $FAILED + $SRVMEM )) |
| exit $FAILED |